summaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/corsair-psu.c14
-rw-r--r--drivers/hwmon/dell-smm-hwmon.c4
-rw-r--r--drivers/hwmon/pmbus/fsp-3y.c32
-rw-r--r--drivers/hwmon/pmbus/isl68137.c4
-rw-r--r--drivers/hwmon/pmbus/q54sj108a2.c2
-rw-r--r--drivers/hwmon/scpi-hwmon.c9
-rw-r--r--drivers/hwmon/tps23861.c17
7 files changed, 68 insertions, 14 deletions
diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
index 02298b86b57b..731d5117f9f1 100644
--- a/drivers/hwmon/corsair-psu.c
+++ b/drivers/hwmon/corsair-psu.c
@@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report *repo
return 0;
}
+#ifdef CONFIG_PM
+static int corsairpsu_resume(struct hid_device *hdev)
+{
+ struct corsairpsu_data *priv = hid_get_drvdata(hdev);
+
+ /* some PSUs turn off the microcontroller during standby, so a reinit is required */
+ return corsairpsu_init(priv);
+}
+#endif
+
static const struct hid_device_id corsairpsu_idtable[] = {
{ HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */
{ HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */
@@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = {
.probe = corsairpsu_probe,
.remove = corsairpsu_remove,
.raw_event = corsairpsu_raw_event,
+#ifdef CONFIG_PM
+ .resume = corsairpsu_resume,
+ .reset_resume = corsairpsu_resume,
+#endif
};
module_hid_driver(corsairpsu_driver);
diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index 2970892bed82..f2221ca0aa7b 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -838,10 +838,10 @@ static struct attribute *i8k_attrs[] = {
static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,
int index)
{
- if (disallow_fan_support && index >= 8)
+ if (disallow_fan_support && index >= 20)
return 0;
if (disallow_fan_type_call &&
- (index == 9 || index == 12 || index == 15))
+ (index == 21 || index == 25 || index == 28))
return 0;
if (index >= 0 && index <= 1 &&
!(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP1))
diff --git a/drivers/hwmon/pmbus/fsp-3y.c b/drivers/hwmon/pmbus/fsp-3y.c
index e24842475254..aec294cc72d1 100644
--- a/drivers/hwmon/pmbus/fsp-3y.c
+++ b/drivers/hwmon/pmbus/fsp-3y.c
@@ -37,6 +37,8 @@ struct fsp3y_data {
struct pmbus_driver_info info;
int chip;
int page;
+
+ bool vout_linear_11;
};
#define to_fsp3y_data(x) container_of(x, struct fsp3y_data, info)
@@ -108,11 +110,9 @@ static int fsp3y_read_byte_data(struct i2c_client *client, int page, int reg)
int rv;
/*
- * YH5151-E outputs vout in linear11. The conversion is done when
- * reading. Here, we have to inject pmbus_core with the correct
- * exponent (it is -6).
+ * Inject an exponent for non-compliant YH5151-E.
*/
- if (data->chip == yh5151e && reg == PMBUS_VOUT_MODE)
+ if (data->vout_linear_11 && reg == PMBUS_VOUT_MODE)
return 0x1A;
rv = set_page(client, page);
@@ -161,10 +161,9 @@ static int fsp3y_read_word_data(struct i2c_client *client, int page, int phase,
return rv;
/*
- * YH-5151E is non-compliant and outputs output voltages in linear11
- * instead of linear16.
+ * Handle YH-5151E non-compliant linear11 vout voltage.
*/
- if (data->chip == yh5151e && reg == PMBUS_READ_VOUT)
+ if (data->vout_linear_11 && reg == PMBUS_READ_VOUT)
rv = sign_extend32(rv, 10) & 0xffff;
return rv;
@@ -256,6 +255,25 @@ static int fsp3y_probe(struct i2c_client *client)
data->info = fsp3y_info[data->chip];
+ /*
+ * YH-5151E sometimes reports vout in linear11 and sometimes in
+ * linear16. This depends on the exact individual piece of hardware. One
+ * YH-5151E can use linear16 and another might use linear11 instead.
+ *
+ * The format can be recognized by reading VOUT_MODE - if it doesn't
+ * report a valid exponent, then vout uses linear11. Otherwise, the
+ * device is compliant and uses linear16.
+ */
+ data->vout_linear_11 = false;
+ if (data->chip == yh5151e) {
+ rv = i2c_smbus_read_byte_data(client, PMBUS_VOUT_MODE);
+ if (rv < 0)
+ return rv;
+
+ if (rv == 0xFF)
+ data->vout_linear_11 = true;
+ }
+
return pmbus_do_probe(client, &data->info);
}
diff --git a/drivers/hwmon/pmbus/isl68137.c b/drivers/hwmon/pmbus/isl68137.c
index 40597a9e799f..1a8caff1ac5f 100644
--- a/drivers/hwmon/pmbus/isl68137.c
+++ b/drivers/hwmon/pmbus/isl68137.c
@@ -244,8 +244,8 @@ static int isl68137_probe(struct i2c_client *client)
info->read_word_data = raa_dmpvr2_read_word_data;
break;
case raa_dmpvr2_2rail_nontc:
- info->func[0] &= ~PMBUS_HAVE_TEMP;
- info->func[1] &= ~PMBUS_HAVE_TEMP;
+ info->func[0] &= ~PMBUS_HAVE_TEMP3;
+ info->func[1] &= ~PMBUS_HAVE_TEMP3;
fallthrough;
case raa_dmpvr2_2rail:
info->pages = 2;
diff --git a/drivers/hwmon/pmbus/q54sj108a2.c b/drivers/hwmon/pmbus/q54sj108a2.c
index b6e8b20466f1..fa298b4265a1 100644
--- a/drivers/hwmon/pmbus/q54sj108a2.c
+++ b/drivers/hwmon/pmbus/q54sj108a2.c
@@ -299,7 +299,7 @@ static int q54sj108a2_probe(struct i2c_client *client)
dev_err(&client->dev, "Failed to read Manufacturer ID\n");
return ret;
}
- if (ret != 5 || strncmp(buf, "DELTA", 5)) {
+ if (ret != 6 || strncmp(buf, "DELTA", 5)) {
buf[ret] = '\0';
dev_err(dev, "Unsupported Manufacturer ID '%s'\n", buf);
return -ENODEV;
diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c
index 25aac40f2764..919877970ae3 100644
--- a/drivers/hwmon/scpi-hwmon.c
+++ b/drivers/hwmon/scpi-hwmon.c
@@ -99,6 +99,15 @@ scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
scpi_scale_reading(&value, sensor);
+ /*
+ * Temperature sensor values are treated as signed values based on
+ * observation even though that is not explicitly specified, and
+ * because an unsigned u64 temperature does not really make practical
+ * sense especially when the temperature is below zero degrees Celsius.
+ */
+ if (sensor->info.class == TEMPERATURE)
+ return sprintf(buf, "%lld\n", (s64)value);
+
return sprintf(buf, "%llu\n", value);
}
diff --git a/drivers/hwmon/tps23861.c b/drivers/hwmon/tps23861.c
index c2484f15298b..8bd6435c13e8 100644
--- a/drivers/hwmon/tps23861.c
+++ b/drivers/hwmon/tps23861.c
@@ -99,11 +99,14 @@
#define POWER_ENABLE 0x19
#define TPS23861_NUM_PORTS 4
+#define TPS23861_GENERAL_MASK_1 0x17
+#define TPS23861_CURRENT_SHUNT_MASK BIT(0)
+
#define TEMPERATURE_LSB 652 /* 0.652 degrees Celsius */
#define VOLTAGE_LSB 3662 /* 3.662 mV */
#define SHUNT_RESISTOR_DEFAULT 255000 /* 255 mOhm */
-#define CURRENT_LSB_255 62260 /* 62.260 uA */
-#define CURRENT_LSB_250 61039 /* 61.039 uA */
+#define CURRENT_LSB_250 62260 /* 62.260 uA */
+#define CURRENT_LSB_255 61039 /* 61.039 uA */
#define RESISTANCE_LSB 110966 /* 11.0966 Ohm*/
#define RESISTANCE_LSB_LOW 157216 /* 15.7216 Ohm*/
@@ -117,6 +120,7 @@ struct tps23861_data {
static struct regmap_config tps23861_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
+ .max_register = 0x6f,
};
static int tps23861_read_temp(struct tps23861_data *data, long *val)
@@ -560,6 +564,15 @@ static int tps23861_probe(struct i2c_client *client)
else
data->shunt_resistor = SHUNT_RESISTOR_DEFAULT;
+ if (data->shunt_resistor == SHUNT_RESISTOR_DEFAULT)
+ regmap_clear_bits(data->regmap,
+ TPS23861_GENERAL_MASK_1,
+ TPS23861_CURRENT_SHUNT_MASK);
+ else
+ regmap_set_bits(data->regmap,
+ TPS23861_GENERAL_MASK_1,
+ TPS23861_CURRENT_SHUNT_MASK);
+
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
data, &tps23861_chip_info,
NULL);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 23:26:49 +0000