diff options
Diffstat (limited to 'drivers/cpufreq')
| -rw-r--r-- | drivers/cpufreq/Kconfig.arm | 27 | ||||
| -rw-r--r-- | drivers/cpufreq/Makefile | 4 | ||||
| -rw-r--r-- | drivers/cpufreq/arm_big_little.h | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/arm_big_little_dt.c | 4 | ||||
| -rw-r--r-- | drivers/cpufreq/cppc_cpufreq.c | 175 | ||||
| -rw-r--r-- | drivers/cpufreq/cpufreq-dt.c | 10 | ||||
| -rw-r--r-- | drivers/cpufreq/cpufreq_opp.c | 114 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos5440-cpufreq.c | 6 | ||||
| -rw-r--r-- | drivers/cpufreq/imx6q-cpufreq.c | 6 | ||||
| -rw-r--r-- | drivers/cpufreq/mt8173-cpufreq.c | 6 | ||||
| -rw-r--r-- | drivers/cpufreq/scpi-cpufreq.c | 124 |
11 files changed, 346 insertions, 132 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index c97d9ea97b48..8014c2307332 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -200,6 +200,16 @@ config ARM_SA1100_CPUFREQ config ARM_SA1110_CPUFREQ bool +config ARM_SCPI_CPUFREQ + tristate "SCPI based CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL + help + This adds the CPUfreq driver support for ARM big.LITTLE platforms + using SCPI protocol for CPU power management. + + This driver uses SCPI Message Protocol driver to interact with the + firmware providing the CPU DVFS functionality. + config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR @@ -228,3 +238,20 @@ config ARM_PXA2xx_CPUFREQ This add the CPUFreq driver support for Intel PXA2xx SOCs. If in doubt, say N. + +config ACPI_CPPC_CPUFREQ + tristate "CPUFreq driver based on the ACPI CPPC spec" + depends on ACPI + select ACPI_CPPC_LIB + default n + help + This adds a CPUFreq driver which uses CPPC methods + as described in the ACPIv5.1 spec. CPPC stands for + Collaborative Processor Performance Controls. It + is based on an abstract continuous scale of CPU + performance values which allows the remote power + processor to flexibly optimize for power and + performance. CPPC relies on power management firmware + support for its operation. + + If in doubt, say N. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 41340384f11f..c0af1a1281c8 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -1,6 +1,5 @@ # CPUfreq core obj-$(CONFIG_CPU_FREQ) += cpufreq.o freq_table.o -obj-$(CONFIG_PM_OPP) += cpufreq_opp.o # CPUfreq stats obj-$(CONFIG_CPU_FREQ_STAT) += cpufreq_stats.o @@ -72,10 +71,13 @@ obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o +obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o +obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o + ################################################################################## # PowerPC platform drivers diff --git a/drivers/cpufreq/arm_big_little.h b/drivers/cpufreq/arm_big_little.h index a211f7db9d32..b88889d9387e 100644 --- a/drivers/cpufreq/arm_big_little.h +++ b/drivers/cpufreq/arm_big_little.h @@ -28,7 +28,7 @@ struct cpufreq_arm_bL_ops { /* * This must set opp table for cpu_dev in a similar way as done by - * of_init_opp_table(). + * dev_pm_opp_of_add_table(). */ int (*init_opp_table)(struct device *cpu_dev); diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index 36d91dba2965..16ddeefe9443 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -54,7 +54,7 @@ static int dt_init_opp_table(struct device *cpu_dev) return -ENOENT; } - ret = of_init_opp_table(cpu_dev); + ret = dev_pm_opp_of_add_table(cpu_dev); of_node_put(np); return ret; @@ -82,7 +82,7 @@ static struct cpufreq_arm_bL_ops dt_bL_ops = { .name = "dt-bl", .get_transition_latency = dt_get_transition_latency, .init_opp_table = dt_init_opp_table, - .free_opp_table = of_free_opp_table, + .free_opp_table = dev_pm_opp_of_remove_table, }; static int generic_bL_probe(struct platform_device *pdev) diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c new file mode 100644 index 000000000000..e8cb334094b0 --- /dev/null +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -0,0 +1,175 @@ +/* + * CPPC (Collaborative Processor Performance Control) driver for + * interfacing with the CPUfreq layer and governors. See + * cppc_acpi.c for CPPC specific methods. + * + * (C) Copyright 2014, 2015 Linaro Ltd. + * Author: Ashwin Chaugule <ashwin.chaugule@linaro.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#define pr_fmt(fmt) "CPPC Cpufreq:" fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/vmalloc.h> + +#include <acpi/cppc_acpi.h> + +/* + * These structs contain information parsed from per CPU + * ACPI _CPC structures. + * e.g. For each CPU the highest, lowest supported + * performance capabilities, desired performance level + * requested etc. + */ +static struct cpudata **all_cpu_data; + +static int cppc_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpudata *cpu; + struct cpufreq_freqs freqs; + int ret = 0; + + cpu = all_cpu_data[policy->cpu]; + + cpu->perf_ctrls.desired_perf = target_freq; + freqs.old = policy->cur; + freqs.new = target_freq; + + cpufreq_freq_transition_begin(policy, &freqs); + ret = cppc_set_perf(cpu->cpu, &cpu->perf_ctrls); + cpufreq_freq_transition_end(policy, &freqs, ret != 0); + + if (ret) + pr_debug("Failed to set target on CPU:%d. ret:%d\n", + cpu->cpu, ret); + + return ret; +} + +static int cppc_verify_policy(struct cpufreq_policy *policy) +{ + cpufreq_verify_within_cpu_limits(policy); + return 0; +} + +static void cppc_cpufreq_stop_cpu(struct cpufreq_policy *policy) +{ + int cpu_num = policy->cpu; + struct cpudata *cpu = all_cpu_data[cpu_num]; + int ret; + + cpu->perf_ctrls.desired_perf = cpu->perf_caps.lowest_perf; + + ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls); + if (ret) + pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n", + cpu->perf_caps.lowest_perf, cpu_num, ret); +} + +static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpudata *cpu; + unsigned int cpu_num = policy->cpu; + int ret = 0; + + cpu = all_cpu_data[policy->cpu]; + + cpu->cpu = cpu_num; + ret = cppc_get_perf_caps(policy->cpu, &cpu->perf_caps); + + if (ret) { + pr_debug("Err reading CPU%d perf capabilities. ret:%d\n", + cpu_num, ret); + return ret; + } + + policy->min = cpu->perf_caps.lowest_perf; + policy->max = cpu->perf_caps.highest_perf; + policy->cpuinfo.min_freq = policy->min; + policy->cpuinfo.max_freq = policy->max; + + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) + cpumask_copy(policy->cpus, cpu->shared_cpu_map); + else { + /* Support only SW_ANY for now. */ + pr_debug("Unsupported CPU co-ord type\n"); + return -EFAULT; + } + + cpumask_set_cpu(policy->cpu, policy->cpus); + cpu->cur_policy = policy; + + /* Set policy->cur to max now. The governors will adjust later. */ + policy->cur = cpu->perf_ctrls.desired_perf = cpu->perf_caps.highest_perf; + + ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls); + if (ret) + pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n", + cpu->perf_caps.highest_perf, cpu_num, ret); + + return ret; +} + +static struct cpufreq_driver cppc_cpufreq_driver = { + .flags = CPUFREQ_CONST_LOOPS, + .verify = cppc_verify_policy, + .target = cppc_cpufreq_set_target, + .init = cppc_cpufreq_cpu_init, + .stop_cpu = cppc_cpufreq_stop_cpu, + .name = "cppc_cpufreq", +}; + +static int __init cppc_cpufreq_init(void) +{ + int i, ret = 0; + struct cpudata *cpu; + + if (acpi_disabled) + return -ENODEV; + + all_cpu_data = kzalloc(sizeof(void *) * num_possible_cpus(), GFP_KERNEL); + if (!all_cpu_data) + return -ENOMEM; + + for_each_possible_cpu(i) { + all_cpu_data[i] = kzalloc(sizeof(struct cpudata), GFP_KERNEL); + if (!all_cpu_data[i]) + goto out; + + cpu = all_cpu_data[i]; + if (!zalloc_cpumask_var(&cpu->shared_cpu_map, GFP_KERNEL)) + goto out; + } + + ret = acpi_get_psd_map(all_cpu_data); + if (ret) { + pr_debug("Error parsing PSD data. Aborting cpufreq registration.\n"); + goto out; + } + + ret = cpufreq_register_driver(&cppc_cpufreq_driver); + if (ret) + goto out; + + return ret; + +out: + for_each_possible_cpu(i) + kfree(all_cpu_data[i]); + + kfree(all_cpu_data); + return -ENODEV; +} + +late_initcall(cppc_cpufreq_init); diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 7c0d70e2a861..90d64081ddb3 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -216,7 +216,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) } /* Get OPP-sharing information from "operating-points-v2" bindings */ - ret = of_get_cpus_sharing_opps(cpu_dev, policy->cpus); + ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus); if (ret) { /* * operating-points-v2 not supported, fallback to old method of @@ -238,7 +238,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) * * OPPs might be populated at runtime, don't check for error here */ - of_cpumask_init_opp_table(policy->cpus); + dev_pm_opp_of_cpumask_add_table(policy->cpus); /* * But we need OPP table to function so if it is not there let's @@ -261,7 +261,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) * OPP tables are initialized only for policy->cpu, do it for * others as well. */ - ret = set_cpus_sharing_opps(cpu_dev, policy->cpus); + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); if (ret) dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", __func__, ret); @@ -368,7 +368,7 @@ out_free_cpufreq_table: out_free_priv: kfree(priv); out_free_opp: - of_cpumask_free_opp_table(policy->cpus); + dev_pm_opp_of_cpumask_remove_table(policy->cpus); out_node_put: of_node_put(np); out_put_reg_clk: @@ -385,7 +385,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy) cpufreq_cooling_unregister(priv->cdev); dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); - of_cpumask_free_opp_table(policy->related_cpus); + dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); clk_put(policy->clk); if (!IS_ERR(priv->cpu_reg)) regulator_put(priv->cpu_reg); diff --git a/drivers/cpufreq/cpufreq_opp.c b/drivers/cpufreq/cpufreq_opp.c deleted file mode 100644 index 0f5e6d5f6da0..000000000000 --- a/drivers/cpufreq/cpufreq_opp.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Generic OPP helper interface for CPUFreq drivers - * - * Copyright (C) 2009-2014 Texas Instruments Incorporated. - * Nishanth Menon - * Romit Dasgupta - * Kevin Hilman - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/pm_opp.h> -#include <linux/rcupdate.h> -#include <linux/slab.h> - -/** - * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device - * @dev: device for which we do this operation - * @table: Cpufreq table returned back to caller - * - * Generate a cpufreq table for a provided device- this assumes that the - * opp list is already initialized and ready for usage. - * - * This function allocates required memory for the cpufreq table. It is - * expected that the caller does the required maintenance such as freeing - * the table as required. - * - * Returns -EINVAL for bad pointers, -ENODEV if the device is not found, -ENOMEM - * if no memory available for the operation (table is not populated), returns 0 - * if successful and table is populated. - * - * WARNING: It is important for the callers to ensure refreshing their copy of - * the table if any of the mentioned functions have been invoked in the interim. - * - * Locking: The internal device_opp and opp structures are RCU protected. - * Since we just use the regular accessor functions to access the internal data - * structures, we use RCU read lock inside this function. As a result, users of - * this function DONOT need to use explicit locks for invoking. - */ -int dev_pm_opp_init_cpufreq_table(struct device *dev, - struct cpufreq_frequency_table **table) -{ - struct dev_pm_opp *opp; - struct cpufreq_frequency_table *freq_table = NULL; - int i, max_opps, ret = 0; - unsigned long rate; - - rcu_read_lock(); - - max_opps = dev_pm_opp_get_opp_count(dev); - if (max_opps <= 0) { - ret = max_opps ? max_opps : -ENODATA; - goto out; - } - - freq_table = kcalloc((max_opps + 1), sizeof(*freq_table), GFP_ATOMIC); - if (!freq_table) { - ret = -ENOMEM; - goto out; - } - - for (i = 0, rate = 0; i < max_opps; i++, rate++) { - /* find next rate */ - opp = dev_pm_opp_find_freq_ceil(dev, &rate); - if (IS_ERR(opp)) { - ret = PTR_ERR(opp); - goto out; - } - freq_table[i].driver_data = i; - freq_table[i].frequency = rate / 1000; - - /* Is Boost/turbo opp ? */ - if (dev_pm_opp_is_turbo(opp)) - freq_table[i].flags = CPUFREQ_BOOST_FREQ; - } - - freq_table[i].driver_data = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; - -out: - rcu_read_unlock(); - if (ret) - kfree(freq_table); - - return ret; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table); - -/** - * dev_pm_opp_free_cpufreq_table() - free the cpufreq table - * @dev: device for which we do this operation - * @table: table to free - * - * Free up the table allocated by dev_pm_opp_init_cpufreq_table - */ -void dev_pm_opp_free_cpufreq_table(struct device *dev, - struct cpufreq_frequency_table **table) -{ - if (!table) - return; - - kfree(*table); - *table = NULL; -} -EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table); diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c index 21a90ed7f3d8..c0f3373706f4 100644 --- a/drivers/cpufreq/exynos5440-cpufreq.c +++ b/drivers/cpufreq/exynos5440-cpufreq.c @@ -360,7 +360,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) goto err_put_node; } - ret = of_init_opp_table(dvfs_info->dev); + ret = dev_pm_opp_of_add_table(dvfs_info->dev); if (ret) { dev_err(dvfs_info->dev, "failed to init OPP table: %d\n", ret); goto err_put_node; @@ -424,7 +424,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) err_free_table: dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); err_free_opp: - of_free_opp_table(dvfs_info->dev); + dev_pm_opp_of_remove_table(dvfs_info->dev); err_put_node: of_node_put(np); dev_err(&pdev->dev, "%s: failed initialization\n", __func__); @@ -435,7 +435,7 @@ static int exynos_cpufreq_remove(struct platform_device *pdev) { cpufreq_unregister_driver(&exynos_driver); dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); - of_free_opp_table(dvfs_info->dev); + dev_pm_opp_of_remove_table(dvfs_info->dev); return 0; } diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 9b4a7bd04dea..ef1fa8145419 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -236,7 +236,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) */ num = dev_pm_opp_get_opp_count(cpu_dev); if (num < 0) { - ret = of_init_opp_table(cpu_dev); + ret = dev_pm_opp_of_add_table(cpu_dev); if (ret < 0) { dev_err(cpu_dev, "failed to init OPP table: %d\n", ret); goto put_reg; @@ -346,7 +346,7 @@ free_freq_table: dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); out_free_opp: if (free_opp) - of_free_opp_table(cpu_dev); + dev_pm_opp_of_remove_table(cpu_dev); put_reg: if (!IS_ERR(arm_reg)) regulator_put(arm_reg); @@ -378,7 +378,7 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev) cpufreq_unregister_driver(&imx6q_cpufreq_driver); dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); if (free_opp) - of_free_opp_table(cpu_dev); + dev_pm_opp_of_remove_table(cpu_dev); regulator_put(arm_reg); if (!IS_ERR(pu_reg)) regulator_put(pu_reg); diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c index 49caed293a3b..83001dc5b646 100644 --- a/drivers/cpufreq/mt8173-cpufreq.c +++ b/drivers/cpufreq/mt8173-cpufreq.c @@ -344,7 +344,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu) /* Both presence and absence of sram regulator are valid cases. */ sram_reg = regulator_get_exclusive(cpu_dev, "sram"); - ret = of_init_opp_table(cpu_dev); + ret = dev_pm_opp_of_add_table(cpu_dev); if (ret) { pr_warn("no OPP table for cpu%d\n", cpu); goto out_free_resources; @@ -378,7 +378,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu) return 0; out_free_opp_table: - of_free_opp_table(cpu_dev); + dev_pm_opp_of_remove_table(cpu_dev); out_free_resources: if (!IS_ERR(proc_reg)) @@ -404,7 +404,7 @@ static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info) if (!IS_ERR(info->inter_clk)) clk_put(info->inter_clk); - of_free_opp_table(info->cpu_dev); + dev_pm_opp_of_remove_table(info->cpu_dev); } static int mtk_cpufreq_init(struct cpufreq_policy *policy) diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c new file mode 100644 index 000000000000..2c3b16fd3a01 --- /dev/null +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -0,0 +1,124 @@ +/* + * System Control and Power Interface (SCPI) based CPUFreq Interface driver + * + * It provides necessary ops to arm_big_little cpufreq driver. + * + * Copyright (C) 2015 ARM Ltd. + * Sudeep Holla <sudeep.holla@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/scpi_protocol.h> +#include <linux/types.h> + +#include "arm_big_little.h" + +static struct scpi_ops *scpi_ops; + +static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev) +{ + u8 domain = topology_physical_package_id(cpu_dev->id); + + if (domain < 0) + return ERR_PTR(-EINVAL); + return scpi_ops->dvfs_get_info(domain); +} + +static int scpi_opp_table_ops(struct device *cpu_dev, bool remove) +{ + int idx, ret = 0; + struct scpi_opp *opp; + struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev); + + if (IS_ERR(info)) + return PTR_ERR(info); + + if (!info->opps) + return -EIO; + + for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) { + if (remove) + dev_pm_opp_remove(cpu_dev, opp->freq); + else + ret = dev_pm_opp_add(cpu_dev, opp->freq, + opp->m_volt * 1000); + if (ret) { + dev_warn(cpu_dev, "failed to add opp %uHz %umV\n", + opp->freq, opp->m_volt); + while (idx-- > 0) + dev_pm_opp_remove(cpu_dev, (--opp)->freq); + return ret; + } + } + return ret; +} + +static int scpi_get_transition_latency(struct device *cpu_dev) +{ + struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev); + + if (IS_ERR(info)) + return PTR_ERR(info); + return info->latency; +} + +static int scpi_init_opp_table(struct device *cpu_dev) +{ + return scpi_opp_table_ops(cpu_dev, false); +} + +static void scpi_free_opp_table(struct device *cpu_dev) +{ + scpi_opp_table_ops(cpu_dev, true); +} + +static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = { + .name = "scpi", + .get_transition_latency = scpi_get_transition_latency, + .init_opp_table = scpi_init_opp_table, + .free_opp_table = scpi_free_opp_table, +}; + +static int scpi_cpufreq_probe(struct platform_device *pdev) +{ + scpi_ops = get_scpi_ops(); + if (!scpi_ops) + return -EIO; + + return bL_cpufreq_register(&scpi_cpufreq_ops); +} + +static int scpi_cpufreq_remove(struct platform_device *pdev) +{ + bL_cpufreq_unregister(&scpi_cpufreq_ops); + scpi_ops = NULL; + return 0; +} + +static struct platform_driver scpi_cpufreq_platdrv = { + .driver = { + .name = "scpi-cpufreq", + .owner = THIS_MODULE, + }, + .probe = scpi_cpufreq_probe, + .remove = scpi_cpufreq_remove, +}; +module_platform_driver(scpi_cpufreq_platdrv); + +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); +MODULE_DESCRIPTION("ARM SCPI CPUFreq interface driver"); +MODULE_LICENSE("GPL v2"); |