diff options
Diffstat (limited to 'drivers/clk/ti/dpll3xxx.c')
| -rw-r--r-- | drivers/clk/ti/dpll3xxx.c | 87 |
1 files changed, 86 insertions, 1 deletions
diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c index 6097b099a5df..e32b3515f9e7 100644 --- a/drivers/clk/ti/dpll3xxx.c +++ b/drivers/clk/ti/dpll3xxx.c @@ -292,7 +292,89 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n) } /** - * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly + * omap3_noncore_dpll_ssc_program - set spread-spectrum clocking registers + * @clk: struct clk * of DPLL to set + * + * Enable the DPLL spread spectrum clocking if frequency modulation and + * frequency spreading have been set, otherwise disable it. + */ +static void omap3_noncore_dpll_ssc_program(struct clk_hw_omap *clk) +{ + struct dpll_data *dd = clk->dpll_data; + unsigned long ref_rate; + u32 v, ctrl, mod_freq_divider, exponent, mantissa; + u32 deltam_step, deltam_ceil; + + ctrl = ti_clk_ll_ops->clk_readl(&dd->control_reg); + + if (dd->ssc_modfreq && dd->ssc_deltam) { + ctrl |= dd->ssc_enable_mask; + + if (dd->ssc_downspread) + ctrl |= dd->ssc_downspread_mask; + else + ctrl &= ~dd->ssc_downspread_mask; + + ref_rate = clk_hw_get_rate(dd->clk_ref); + mod_freq_divider = + (ref_rate / dd->last_rounded_n) / (4 * dd->ssc_modfreq); + if (dd->ssc_modfreq > (ref_rate / 70)) + pr_warn("clock: SSC modulation frequency of DPLL %s greater than %ld\n", + __clk_get_name(clk->hw.clk), ref_rate / 70); + + exponent = 0; + mantissa = mod_freq_divider; + while ((mantissa > 127) && (exponent < 7)) { + exponent++; + mantissa /= 2; + } + if (mantissa > 127) + mantissa = 127; + + v = ti_clk_ll_ops->clk_readl(&dd->ssc_modfreq_reg); + v &= ~(dd->ssc_modfreq_mant_mask | dd->ssc_modfreq_exp_mask); + v |= mantissa << __ffs(dd->ssc_modfreq_mant_mask); + v |= exponent << __ffs(dd->ssc_modfreq_exp_mask); + ti_clk_ll_ops->clk_writel(v, &dd->ssc_modfreq_reg); + + deltam_step = dd->last_rounded_m * dd->ssc_deltam; + deltam_step /= 10; + if (dd->ssc_downspread) + deltam_step /= 2; + + deltam_step <<= __ffs(dd->ssc_deltam_int_mask); + deltam_step /= 100; + deltam_step /= mod_freq_divider; + if (deltam_step > 0xFFFFF) + deltam_step = 0xFFFFF; + + deltam_ceil = (deltam_step & dd->ssc_deltam_int_mask) >> + __ffs(dd->ssc_deltam_int_mask); + if (deltam_step & dd->ssc_deltam_frac_mask) + deltam_ceil++; + + if ((dd->ssc_downspread && + ((dd->last_rounded_m - (2 * deltam_ceil)) < 20 || + dd->last_rounded_m > 2045)) || + ((dd->last_rounded_m - deltam_ceil) < 20 || + (dd->last_rounded_m + deltam_ceil) > 2045)) + pr_warn("clock: SSC multiplier of DPLL %s is out of range\n", + __clk_get_name(clk->hw.clk)); + + v = ti_clk_ll_ops->clk_readl(&dd->ssc_deltam_reg); + v &= ~(dd->ssc_deltam_int_mask | dd->ssc_deltam_frac_mask); + v |= deltam_step << __ffs(dd->ssc_deltam_int_mask | + dd->ssc_deltam_frac_mask); + ti_clk_ll_ops->clk_writel(v, &dd->ssc_deltam_reg); + } else { + ctrl &= ~dd->ssc_enable_mask; + } + + ti_clk_ll_ops->clk_writel(ctrl, &dd->control_reg); +} + +/** + * omap3_noncore_dpll_program - set non-core DPLL M,N values directly * @clk: struct clk * of DPLL to set * @freqsel: FREQSEL value to set * @@ -390,6 +472,9 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) ti_clk_ll_ops->clk_writel(v, &dd->control_reg); } + if (dd->ssc_enable_mask) + omap3_noncore_dpll_ssc_program(clk); + /* We let the clock framework set the other output dividers later */ /* REVISIT: Set ramp-up delay? */ |