summaryrefslogtreecommitdiff
path: root/drivers/acpi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi')
-rw-r--r--drivers/acpi/acpica/Makefile27
-rw-r--r--drivers/acpi/acpica/aclocal.h7
-rw-r--r--drivers/acpi/acpica/hwsleep.c43
-rw-r--r--drivers/acpi/acpica/hwvalid.c86
-rw-r--r--drivers/acpi/acpica/rscalc.c7
-rw-r--r--drivers/acpi/acpica/rscreate.c27
-rw-r--r--drivers/acpi/bus.c2
-rw-r--r--drivers/acpi/button.c140
-rw-r--r--drivers/acpi/ec.c1
-rw-r--r--drivers/acpi/osl.c4
-rw-r--r--drivers/acpi/pci_bind.c24
-rw-r--r--drivers/acpi/pci_irq.c5
-rw-r--r--drivers/acpi/processor_core.c2
-rw-r--r--drivers/acpi/processor_idle.c68
-rw-r--r--drivers/acpi/processor_perflib.c12
-rw-r--r--drivers/acpi/processor_throttling.c25
-rw-r--r--drivers/acpi/sleep.c35
-rw-r--r--drivers/acpi/system.c11
-rw-r--r--drivers/acpi/thermal.c2
-rw-r--r--drivers/acpi/video.c108
20 files changed, 392 insertions, 244 deletions
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 17e50824a6f1..72ac28da14e3 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -5,40 +5,43 @@
ccflags-y := -Os
ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
-obj-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \
+# use acpi.o to put all files here into acpi.o modparam namespace
+obj-y += acpi.o
+
+acpi-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \
dsmethod.o dsobject.o dsutils.o dswload.o dswstate.o \
dsinit.o
-obj-y += evevent.o evregion.o evsci.o evxfevnt.o \
+acpi-y += evevent.o evregion.o evsci.o evxfevnt.o \
evmisc.o evrgnini.o evxface.o evxfregn.o \
evgpe.o evgpeblk.o
-obj-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\
+acpi-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\
exconvrt.o exfldio.o exoparg1.o exprep.o exresop.o exsystem.o\
excreate.o exmisc.o exoparg2.o exregion.o exstore.o exutils.o \
exdump.o exmutex.o exoparg3.o exresnte.o exstoren.o
-obj-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o
+acpi-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o
-obj-$(ACPI_FUTURE_USAGE) += hwtimer.o
+acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
-obj-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \
+acpi-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \
nsalloc.o nseval.o nsnames.o nsutils.o nsxfname.o \
nsdump.o nsinit.o nsobject.o nswalk.o nsxfobj.o \
nsparse.o nspredef.o
-obj-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
+acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
-obj-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \
+acpi-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \
psopcode.o psscope.o psutils.o psxface.o
-obj-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
+acpi-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
rscalc.o rsirq.o rsmemory.o rsutils.o
-obj-$(ACPI_FUTURE_USAGE) += rsdump.o
+acpi-$(ACPI_FUTURE_USAGE) += rsdump.o
-obj-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
+acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
-obj-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
+acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
utstate.o utmutex.o utobject.o utresrc.o utlock.o
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 772ee5c4ccca..2ec394a328e9 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -787,7 +787,12 @@ struct acpi_bit_register_info {
/* For control registers, both ignored and reserved bits must be preserved */
-#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0201 /* Bits 9, 0(SCI_EN) */
+/*
+ * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0)
+ * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly
+ * as a BIOS workaround on some machines.
+ */
+#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0200 /* Bits 9 */
#define ACPI_PM1_CONTROL_RESERVED_BITS 0xC1F8 /* Bits 14-15, 3-8 */
#define ACPI_PM1_CONTROL_PRESERVED_BITS \
(ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS)
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index baa5fc05e124..db307a356f08 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -211,6 +211,12 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
+static unsigned int gts, bfs;
+module_param(gts, uint, 0644);
+module_param(bfs, uint, 0644);
+MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
+MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
+
/*******************************************************************************
*
* FUNCTION: acpi_enter_sleep_state
@@ -278,16 +284,18 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
return_ACPI_STATUS(status);
}
- /* Execute the _GTS method */
+ if (gts) {
+ /* Execute the _GTS method */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = sleep_state;
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = sleep_state;
- status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- return_ACPI_STATUS(status);
+ status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ return_ACPI_STATUS(status);
+ }
}
/* Get current value of PM1A control */
@@ -513,18 +521,19 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
}
}
- /* Execute the _BFS method */
+ if (bfs) {
+ /* Execute the _BFS method */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = sleep_state;
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = sleep_state;
- status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+ status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+ }
}
-
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index 7737afb157c3..ec33f270c5b7 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -90,6 +90,7 @@ static const struct acpi_port_info acpi_protected_ports[] = {
{"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP},
{"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP},
{"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP},
+ {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP},
{"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP},
{"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP},
{"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP},
@@ -151,7 +152,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
ACPI_ERROR((AE_INFO,
"Illegal I/O port address/length above 64K: 0x%p/%X",
ACPI_CAST_PTR(void, address), byte_width));
- return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
+ return_ACPI_STATUS(AE_LIMIT);
}
/* Exit if requested address is not within the protected port table */
@@ -178,11 +179,12 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
/* Port illegality may depend on the _OSI calls made by the BIOS */
if (acpi_gbl_osi_data >= port_info->osi_dependency) {
- ACPI_ERROR((AE_INFO,
- "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
- ACPI_CAST_PTR(void, address),
- byte_width, port_info->name,
- port_info->start, port_info->end));
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
+ ACPI_CAST_PTR(void, address),
+ byte_width, port_info->name,
+ port_info->start,
+ port_info->end));
return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
}
@@ -206,7 +208,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
* Value Where value is placed
* Width Number of bits
*
- * RETURN: Value read from port
+ * RETURN: Status and value read from port
*
* DESCRIPTION: Read data from an I/O port or register. This is a front-end
* to acpi_os_read_port that performs validation on both the port
@@ -217,14 +219,43 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
{
acpi_status status;
+ u32 one_byte;
+ u32 i;
+
+ /* Validate the entire request and perform the I/O */
status = acpi_hw_validate_io_request(address, width);
- if (ACPI_FAILURE(status)) {
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_os_read_port(address, value, width);
return status;
}
- status = acpi_os_read_port(address, value, width);
- return status;
+ if (status != AE_AML_ILLEGAL_ADDRESS) {
+ return status;
+ }
+
+ /*
+ * There has been a protection violation within the request. Fall
+ * back to byte granularity port I/O and ignore the failing bytes.
+ * This provides Windows compatibility.
+ */
+ for (i = 0, *value = 0; i < width; i += 8) {
+
+ /* Validate and read one byte */
+
+ if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+ status = acpi_os_read_port(address, &one_byte, 8);
+ if (ACPI_FAILURE(status)) {
+ return status;
+ }
+
+ *value |= (one_byte << i);
+ }
+
+ address++;
+ }
+
+ return AE_OK;
}
/******************************************************************************
@@ -235,7 +266,7 @@ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
* Value Value to write
* Width Number of bits
*
- * RETURN: None
+ * RETURN: Status
*
* DESCRIPTION: Write data to an I/O port or register. This is a front-end
* to acpi_os_write_port that performs validation on both the port
@@ -246,12 +277,39 @@ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width)
{
acpi_status status;
+ u32 i;
+
+ /* Validate the entire request and perform the I/O */
status = acpi_hw_validate_io_request(address, width);
- if (ACPI_FAILURE(status)) {
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_os_write_port(address, value, width);
return status;
}
- status = acpi_os_write_port(address, value, width);
- return status;
+ if (status != AE_AML_ILLEGAL_ADDRESS) {
+ return status;
+ }
+
+ /*
+ * There has been a protection violation within the request. Fall
+ * back to byte granularity port I/O and ignore the failing bytes.
+ * This provides Windows compatibility.
+ */
+ for (i = 0; i < width; i += 8) {
+
+ /* Validate and write one byte */
+
+ if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+ status =
+ acpi_os_write_port(address, (value >> i) & 0xFF, 8);
+ if (ACPI_FAILURE(status)) {
+ return status;
+ }
+ }
+
+ address++;
+ }
+
+ return AE_OK;
}
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index b6667ff059e5..88b5a2c4814d 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -543,6 +543,13 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
package_element = *top_object_list;
+ /* We must have a valid Package object */
+
+ if (!package_element ||
+ (package_element->common.type != ACPI_TYPE_PACKAGE)) {
+ return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+ }
+
/*
* The sub_object_list will now point to an array of the
* four IRQ elements: Address, Pin, Source and source_index
diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c
index 663f692fffcf..a3c23d686d5f 100644
--- a/drivers/acpi/acpica/rscreate.c
+++ b/drivers/acpi/acpica/rscreate.c
@@ -191,8 +191,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);
for (index = 0; index < number_of_elements; index++) {
- int source_name_index = 2;
- int source_index_index = 3;
/*
* Point user_prt past this current structure
@@ -261,27 +259,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
return_ACPI_STATUS(AE_BAD_DATA);
}
- /*
- * If BIOS erroneously reversed the _PRT source_name and source_index,
- * then reverse them back.
- */
- if ((sub_object_list[3])->common.type !=
- ACPI_TYPE_INTEGER) {
- if (acpi_gbl_enable_interpreter_slack) {
- source_name_index = 3;
- source_index_index = 2;
- printk(KERN_WARNING
- "ACPI: Handling Garbled _PRT entry\n");
- } else {
- ACPI_ERROR((AE_INFO,
- "(PRT[%X].source_index) Need Integer, found %s",
- index,
- acpi_ut_get_object_type_name
- (sub_object_list[3])));
- return_ACPI_STATUS(AE_BAD_DATA);
- }
- }
-
user_prt->pin = (u32) obj_desc->integer.value;
/*
@@ -304,7 +281,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
* 3) Third subobject: Dereference the PRT.source_name
* The name may be unresolved (slack mode), so allow a null object
*/
- obj_desc = sub_object_list[source_name_index];
+ obj_desc = sub_object_list[2];
if (obj_desc) {
switch (obj_desc->common.type) {
case ACPI_TYPE_LOCAL_REFERENCE:
@@ -378,7 +355,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
/* 4) Fourth subobject: Dereference the PRT.source_index */
- obj_desc = sub_object_list[source_index_index];
+ obj_desc = sub_object_list[3];
if (obj_desc->common.type != ACPI_TYPE_INTEGER) {
ACPI_ERROR((AE_INFO,
"(PRT[%X].SourceIndex) Need Integer, found %s",
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index e8f7b64e92da..ae862f1798dc 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -312,7 +312,7 @@ int acpi_bus_set_power(acpi_handle handle, int state)
end:
if (result)
printk(KERN_WARNING PREFIX
- "Transitioning device [%s] to D%d\n",
+ "Device [%s] failed to transition to D%d\n",
device->pnp.bus_id, state);
else {
device->power.state = state;
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index d73c94b8441d..9195deba9d94 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -1,5 +1,5 @@
/*
- * acpi_button.c - ACPI Button Driver ($Revision: 30 $)
+ * button.c - ACPI Button Driver
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -41,17 +41,13 @@
#define ACPI_BUTTON_SUBCLASS_POWER "power"
#define ACPI_BUTTON_HID_POWER "PNP0C0C"
-#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_POWERF "Power Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button"
#define ACPI_BUTTON_TYPE_POWER 0x01
-#define ACPI_BUTTON_TYPE_POWERF 0x02
#define ACPI_BUTTON_SUBCLASS_SLEEP "sleep"
#define ACPI_BUTTON_HID_SLEEP "PNP0C0E"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEPF "Sleep Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button"
#define ACPI_BUTTON_TYPE_SLEEP 0x03
-#define ACPI_BUTTON_TYPE_SLEEPF 0x04
#define ACPI_BUTTON_SUBCLASS_LID "lid"
#define ACPI_BUTTON_HID_LID "PNP0C0D"
@@ -95,7 +91,6 @@ static struct acpi_driver acpi_button_driver = {
};
struct acpi_button {
- struct acpi_device *device; /* Fixed button kludge */
unsigned int type;
struct input_dev *input;
char phys[32]; /* for input device */
@@ -126,14 +121,10 @@ static struct proc_dir_entry *acpi_button_dir;
static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = seq->private;
-
- if (!button || !button->device)
- return 0;
+ struct acpi_device *device = seq->private;
seq_printf(seq, "type: %s\n",
- acpi_device_name(button->device));
-
+ acpi_device_name(device));
return 0;
}
@@ -144,14 +135,11 @@ static int acpi_button_info_open_fs(struct inode *inode, struct file *file)
static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = seq->private;
+ struct acpi_device *device = seq->private;
acpi_status status;
unsigned long long state;
- if (!button || !button->device)
- return 0;
-
- status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state);
+ status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
seq_printf(seq, "state: %s\n",
ACPI_FAILURE(status) ? "unsupported" :
(state ? "open" : "closed"));
@@ -169,24 +157,17 @@ static struct proc_dir_entry *acpi_lid_dir;
static int acpi_button_add_fs(struct acpi_device *device)
{
+ struct acpi_button *button = acpi_driver_data(device);
struct proc_dir_entry *entry = NULL;
- struct acpi_button *button;
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- button = acpi_driver_data(device);
switch (button->type) {
case ACPI_BUTTON_TYPE_POWER:
- case ACPI_BUTTON_TYPE_POWERF:
if (!acpi_power_dir)
acpi_power_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_POWER,
acpi_button_dir);
entry = acpi_power_dir;
break;
case ACPI_BUTTON_TYPE_SLEEP:
- case ACPI_BUTTON_TYPE_SLEEPF:
if (!acpi_sleep_dir)
acpi_sleep_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_SLEEP,
acpi_button_dir);
@@ -210,8 +191,7 @@ static int acpi_button_add_fs(struct acpi_device *device)
/* 'info' [R] */
entry = proc_create_data(ACPI_BUTTON_FILE_INFO,
S_IRUGO, acpi_device_dir(device),
- &acpi_button_info_fops,
- acpi_driver_data(device));
+ &acpi_button_info_fops, device);
if (!entry)
return -ENODEV;
@@ -219,8 +199,7 @@ static int acpi_button_add_fs(struct acpi_device *device)
if (button->type == ACPI_BUTTON_TYPE_LID) {
entry = proc_create_data(ACPI_BUTTON_FILE_STATE,
S_IRUGO, acpi_device_dir(device),
- &acpi_button_state_fops,
- acpi_driver_data(device));
+ &acpi_button_state_fops, device);
if (!entry)
return -ENODEV;
}
@@ -250,15 +229,16 @@ static int acpi_button_remove_fs(struct acpi_device *device)
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
-static int acpi_lid_send_state(struct acpi_button *button)
+static int acpi_lid_send_state(struct acpi_device *device)
{
+ struct acpi_button *button = acpi_driver_data(device);
unsigned long long state;
acpi_status status;
- status = acpi_evaluate_integer(button->device->handle, "_LID", NULL,
- &state);
+ status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
if (ACPI_FAILURE(status))
return -ENODEV;
+
/* input layer checks if event is redundant */
input_report_switch(button->input, SW_LID, !state);
input_sync(button->input);
@@ -270,9 +250,6 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
struct acpi_button *button = acpi_driver_data(device);
struct input_dev *input;
- if (!button || !button->device)
- return;
-
switch (event) {
case ACPI_FIXED_HARDWARE_EVENT:
event = ACPI_BUTTON_NOTIFY_STATUS;
@@ -280,7 +257,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
case ACPI_BUTTON_NOTIFY_STATUS:
input = button->input;
if (button->type == ACPI_BUTTON_TYPE_LID) {
- acpi_lid_send_state(button);
+ acpi_lid_send_state(device);
} else {
int keycode = test_bit(KEY_SLEEP, input->keybit) ?
KEY_SLEEP : KEY_POWER;
@@ -291,43 +268,35 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
input_sync(input);
}
- acpi_bus_generate_proc_event(button->device, event,
- ++button->pushed);
+ acpi_bus_generate_proc_event(device, event, ++button->pushed);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
break;
}
-
- return;
}
static int acpi_button_resume(struct acpi_device *device)
{
- struct acpi_button *button;
- if (!device)
- return -EINVAL;
- button = acpi_driver_data(device);
- if (button && button->type == ACPI_BUTTON_TYPE_LID)
- return acpi_lid_send_state(button);
+ struct acpi_button *button = acpi_driver_data(device);
+
+ if (button->type == ACPI_BUTTON_TYPE_LID)
+ return acpi_lid_send_state(device);
return 0;
}
static int acpi_button_add(struct acpi_device *device)
{
- int error;
struct acpi_button *button;
struct input_dev *input;
-
- if (!device)
- return -EINVAL;
+ char *hid, *name, *class;
+ int error;
button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
if (!button)
return -ENOMEM;
- button->device = device;
device->driver_data = button;
button->input = input = input_allocate_device();
@@ -336,40 +305,29 @@ static int acpi_button_add(struct acpi_device *device)
goto err_free_button;
}
- /*
- * Determine the button type (via hid), as fixed-feature buttons
- * need to be handled a bit differently than generic-space.
- */
- if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWER)) {
+ hid = acpi_device_hid(device);
+ name = acpi_device_name(device);
+ class = acpi_device_class(device);
+
+ if (!strcmp(hid, ACPI_BUTTON_HID_POWER) ||
+ !strcmp(hid, ACPI_BUTTON_HID_POWERF)) {
button->type = ACPI_BUTTON_TYPE_POWER;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_POWER);
- sprintf(acpi_device_class(device), "%s/%s",
- ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF)) {
- button->type = ACPI_BUTTON_TYPE_POWERF;
- strcpy(acpi_device_name(device),
- ACPI_BUTTON_DEVICE_NAME_POWERF);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEP)) {
+ } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP) ||
+ !strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) {
button->type = ACPI_BUTTON_TYPE_SLEEP;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_SLEEP);
- sprintf(acpi_device_class(device), "%s/%s",
- ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF)) {
- button->type = ACPI_BUTTON_TYPE_SLEEPF;
- strcpy(acpi_device_name(device),
- ACPI_BUTTON_DEVICE_NAME_SLEEPF);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_LID)) {
+ } else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) {
button->type = ACPI_BUTTON_TYPE_LID;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_LID);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
} else {
- printk(KERN_ERR PREFIX "Unsupported hid [%s]\n",
- acpi_device_hid(device));
+ printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
error = -ENODEV;
goto err_free_input;
}
@@ -378,10 +336,9 @@ static int acpi_button_add(struct acpi_device *device)
if (error)
goto err_free_input;
- snprintf(button->phys, sizeof(button->phys),
- "%s/button/input0", acpi_device_hid(device));
+ snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid);
- input->name = acpi_device_name(device);
+ input->name = name;
input->phys = button->phys;
input->id.bustype = BUS_HOST;
input->id.product = button->type;
@@ -389,13 +346,11 @@ static int acpi_button_add(struct acpi_device *device)
switch (button->type) {
case ACPI_BUTTON_TYPE_POWER:
- case ACPI_BUTTON_TYPE_POWERF:
input->evbit[0] = BIT_MASK(EV_KEY);
set_bit(KEY_POWER, input->keybit);
break;
case ACPI_BUTTON_TYPE_SLEEP:
- case ACPI_BUTTON_TYPE_SLEEPF:
input->evbit[0] = BIT_MASK(EV_KEY);
set_bit(KEY_SLEEP, input->keybit);
break;
@@ -410,7 +365,7 @@ static int acpi_button_add(struct acpi_device *device)
if (error)
goto err_remove_fs;
if (button->type == ACPI_BUTTON_TYPE_LID)
- acpi_lid_send_state(button);
+ acpi_lid_send_state(device);
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
@@ -422,9 +377,7 @@ static int acpi_button_add(struct acpi_device *device)
device->wakeup.state.enabled = 1;
}
- printk(KERN_INFO PREFIX "%s [%s]\n",
- acpi_device_name(device), acpi_device_bid(device));
-
+ printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
return 0;
err_remove_fs:
@@ -438,17 +391,11 @@ static int acpi_button_add(struct acpi_device *device)
static int acpi_button_remove(struct acpi_device *device, int type)
{
- struct acpi_button *button;
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- button = acpi_driver_data(device);
+ struct acpi_button *button = acpi_driver_data(device);
acpi_button_remove_fs(device);
input_unregister_device(button->input);
kfree(button);
-
return 0;
}
@@ -459,6 +406,7 @@ static int __init acpi_button_init(void)
acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
if (!acpi_button_dir)
return -ENODEV;
+
result = acpi_bus_register_driver(&acpi_button_driver);
if (result < 0) {
remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 04e90443eff7..391f331674c7 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1065,6 +1065,7 @@ static int acpi_ec_resume(struct acpi_device *device)
struct acpi_ec *ec = acpi_driver_data(device);
/* Enable use of GPE back */
clear_bit(EC_FLAGS_NO_GPE, &ec->flags);
+ set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
acpi_enable_gpe(NULL, ec->gpe);
return 0;
}
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index d59f08ecaf16..d916bea729f1 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -353,8 +353,10 @@ static irqreturn_t acpi_irq(int irq, void *dev_id)
if (handled) {
acpi_irq_handled++;
return IRQ_HANDLED;
- } else
+ } else {
+ acpi_irq_not_handled++;
return IRQ_NONE;
+ }
}
acpi_status
diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
index 95650f83ce2e..bc46de3d967f 100644
--- a/drivers/acpi/pci_bind.c
+++ b/drivers/acpi/pci_bind.c
@@ -116,9 +116,6 @@ int acpi_pci_bind(struct acpi_device *device)
struct acpi_pci_data *pdata;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
acpi_handle handle;
- struct pci_dev *dev;
- struct pci_bus *bus;
-
if (!device || !device->parent)
return -EINVAL;
@@ -176,20 +173,9 @@ int acpi_pci_bind(struct acpi_device *device)
* Locate matching device in PCI namespace. If it doesn't exist
* this typically means that the device isn't currently inserted
* (e.g. docking station, port replicator, etc.).
- * We cannot simply search the global pci device list, since
- * PCI devices are added to the global pci list when the root
- * bridge start ops are run, which may not have happened yet.
*/
- bus = pci_find_bus(data->id.segment, data->id.bus);
- if (bus) {
- list_for_each_entry(dev, &bus->devices, bus_list) {
- if (dev->devfn == PCI_DEVFN(data->id.device,
- data->id.function)) {
- data->dev = dev;
- break;
- }
- }
- }
+ data->dev = pci_get_slot(pdata->bus,
+ PCI_DEVFN(data->id.device, data->id.function));
if (!data->dev) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device %04x:%02x:%02x.%d not present in PCI namespace\n",
@@ -259,9 +245,10 @@ int acpi_pci_bind(struct acpi_device *device)
end:
kfree(buffer.pointer);
- if (result)
+ if (result) {
+ pci_dev_put(data->dev);
kfree(data);
-
+ }
return result;
}
@@ -303,6 +290,7 @@ static int acpi_pci_unbind(struct acpi_device *device)
if (data->dev->subordinate) {
acpi_pci_irq_del_prt(data->id.segment, data->bus->number);
}
+ pci_dev_put(data->dev);
kfree(data);
end:
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 51b9f8280f88..2faa9e2ac893 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -401,7 +401,8 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
/* Interrupt Line values above 0xF are forbidden */
if (dev->irq > 0 && (dev->irq <= 0xF)) {
printk(" - using IRQ %d\n", dev->irq);
- acpi_register_gsi(dev->irq, ACPI_LEVEL_SENSITIVE,
+ acpi_register_gsi(&dev->dev, dev->irq,
+ ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
return 0;
} else {
@@ -410,7 +411,7 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
}
}
- rc = acpi_register_gsi(gsi, triggering, polarity);
+ rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
if (rc < 0) {
dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n",
pin_name(pin));
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 45ad3288c5ff..23f0fb84f1c1 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -844,7 +844,7 @@ static int acpi_processor_add(struct acpi_device *device)
if (!pr)
return -ENOMEM;
- if (!alloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
+ if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
kfree(pr);
return -ENOMEM;
}
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 6fe121434ffb..10a2d913635a 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -148,6 +148,9 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr,
if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
return;
+ if (boot_cpu_has(X86_FEATURE_AMDC1E))
+ type = ACPI_STATE_C1;
+
/*
* Check, if one of the previous states already marked the lapic
* unstable
@@ -202,21 +205,44 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr,
* Suspend / resume control
*/
static int acpi_idle_suspend;
+static u32 saved_bm_rld;
+
+static void acpi_idle_bm_rld_save(void)
+{
+ acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
+}
+static void acpi_idle_bm_rld_restore(void)
+{
+ u32 resumed_bm_rld;
+
+ acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
+
+ if (resumed_bm_rld != saved_bm_rld)
+ acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
+}
int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
{
+ if (acpi_idle_suspend == 1)
+ return 0;
+
+ acpi_idle_bm_rld_save();
acpi_idle_suspend = 1;
return 0;
}
int acpi_processor_resume(struct acpi_device * device)
{
+ if (acpi_idle_suspend == 0)
+ return 0;
+
+ acpi_idle_bm_rld_restore();
acpi_idle_suspend = 0;
return 0;
}
#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-static int tsc_halts_in_c(int state)
+static void tsc_check_state(int state)
{
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
@@ -226,13 +252,17 @@ static int tsc_halts_in_c(int state)
* C/P/S0/S1 states when this bit is set.
*/
if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
- return 0;
+ return;
/*FALL THROUGH*/
default:
- return state > ACPI_STATE_C1;
+ /* TSC could halt in idle, so notify users */
+ if (state > ACPI_STATE_C1)
+ mark_tsc_unstable("TSC halts in idle");
}
}
+#else
+static void tsc_check_state(int state) { return; }
#endif
static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
@@ -578,12 +608,13 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
pr->power.timer_broadcast_on_state = INT_MAX;
- for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
+ for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
struct acpi_processor_cx *cx = &pr->power.states[i];
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
+ acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C2:
@@ -598,6 +629,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
acpi_timer_check_state(i, pr, cx);
break;
}
+ if (cx->valid)
+ tsc_check_state(cx->type);
if (cx->valid)
working++;
@@ -657,11 +690,9 @@ static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
seq_printf(seq, "active state: C%zd\n"
"max_cstate: C%d\n"
- "bus master activity: %08x\n"
"maximum allowed latency: %d usec\n",
pr->power.state ? pr->power.state - pr->power.states : 0,
- max_cstate, (unsigned)pr->power.bm_activity,
- pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
+ max_cstate, pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
seq_puts(seq, "states:\n");
@@ -803,11 +834,12 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
/* Do not access any ACPI IO ports in suspend path */
if (acpi_idle_suspend) {
- acpi_safe_halt();
local_irq_enable();
+ cpu_relax();
return 0;
}
+ acpi_state_timer_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
kt2 = ktime_get_real();
@@ -815,6 +847,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
local_irq_enable();
cx->usage++;
+ acpi_state_timer_broadcast(pr, cx, 0);
return idle_time;
}
@@ -871,11 +904,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
kt2 = ktime_get_real();
idle_time = ktime_to_us(ktime_sub(kt2, kt1));
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
- /* TSC could halt in idle, so notify users */
- if (tsc_halts_in_c(cx->type))
- mark_tsc_unstable("TSC halts in idle");;
-#endif
sleep_ticks = us_to_pm_timer_ticks(idle_time);
/* Tell the scheduler how much we idled: */
@@ -955,6 +983,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
*/
acpi_state_timer_broadcast(pr, cx, 1);
+ kt1 = ktime_get_real();
/*
* disable bus master
* bm_check implies we need ARB_DIS
@@ -976,10 +1005,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
ACPI_FLUSH_CPU_CACHE();
}
- kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
- kt2 = ktime_get_real();
- idle_time = ktime_to_us(ktime_sub(kt2, kt1));
/* Re-enable bus master arbitration */
if (pr->flags.bm_check && pr->flags.bm_control) {
@@ -988,12 +1014,9 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
c3_cpu_count--;
spin_unlock(&c3_lock);
}
+ kt2 = ktime_get_real();
+ idle_time = ktime_to_us(ktime_sub(kt2, kt1));
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
- /* TSC could halt in idle, so notify users */
- if (tsc_halts_in_c(ACPI_STATE_C3))
- mark_tsc_unstable("TSC halts in idle");
-#endif
sleep_ticks = us_to_pm_timer_ticks(idle_time);
/* Tell the scheduler how much we idled: */
sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
@@ -1037,6 +1060,9 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
dev->states[i].desc[0] = '\0';
}
+ if (max_cstate == 0)
+ max_cstate = 1;
+
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
cx = &pr->power.states[i];
state = &dev->states[count];
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index cafb41000f6b..60e543d3234e 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -309,9 +309,15 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr)
(u32) px->bus_master_latency,
(u32) px->control, (u32) px->status));
- if (!px->core_frequency) {
- printk(KERN_ERR PREFIX
- "Invalid _PSS data: freq is zero\n");
+ /*
+ * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
+ */
+ if (!px->core_frequency ||
+ ((u32)(px->core_frequency * 1000) !=
+ (px->core_frequency * 1000))) {
+ printk(KERN_ERR FW_BUG PREFIX
+ "Invalid BIOS _PSS frequency: 0x%llx MHz\n",
+ px->core_frequency);
result = -EFAULT;
kfree(pr->performance->states);
goto end;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index d0d1f4d50434..227543789ba9 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -45,6 +45,14 @@
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_throttling");
+/* ignore_tpc:
+ * 0 -> acpi processor driver doesn't ignore _TPC values
+ * 1 -> acpi processor driver ignores _TPC values
+ */
+static int ignore_tpc;
+module_param(ignore_tpc, int, 0644);
+MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support");
+
struct throttling_tstate {
unsigned int cpu; /* cpu nr */
int target_state; /* target T-state */
@@ -283,6 +291,10 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
if (!pr)
return -EINVAL;
+
+ if (ignore_tpc)
+ goto end;
+
status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
@@ -290,6 +302,8 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
}
return -ENODEV;
}
+
+end:
pr->throttling_platform_limit = (int)tpc;
return 0;
}
@@ -302,6 +316,9 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
struct acpi_processor_limit *limit;
int target_state;
+ if (ignore_tpc)
+ return 0;
+
result = acpi_processor_get_platform_limit(pr);
if (result) {
/* Throttling Limit is unsupported */
@@ -821,6 +838,14 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
ret = acpi_read_throttling_status(pr, &value);
if (ret >= 0) {
state = acpi_get_throttling_state(pr, value);
+ if (state == -1) {
+ ACPI_WARNING((AE_INFO,
+ "Invalid throttling state, reset"));
+ state = 0;
+ ret = acpi_processor_set_throttling(pr, state);
+ if (ret)
+ return ret;
+ }
pr->throttling.state = state;
}
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 779e4e500df4..01574a066534 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -300,9 +300,9 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state)
static struct platform_suspend_ops acpi_suspend_ops = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin,
- .prepare = acpi_pm_prepare,
+ .prepare_late = acpi_pm_prepare,
.enter = acpi_suspend_enter,
- .finish = acpi_pm_finish,
+ .wake = acpi_pm_finish,
.end = acpi_pm_end,
};
@@ -328,9 +328,9 @@ static int acpi_suspend_begin_old(suspend_state_t pm_state)
static struct platform_suspend_ops acpi_suspend_ops_old = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin_old,
- .prepare = acpi_pm_disable_gpes,
+ .prepare_late = acpi_pm_disable_gpes,
.enter = acpi_suspend_enter,
- .finish = acpi_pm_finish,
+ .wake = acpi_pm_finish,
.end = acpi_pm_end,
.recover = acpi_pm_finish,
};
@@ -713,6 +713,32 @@ static void acpi_power_off(void)
acpi_enter_sleep_state(ACPI_STATE_S5);
}
+/*
+ * ACPI 2.0 created the optional _GTS and _BFS,
+ * but industry adoption has been neither rapid nor broad.
+ *
+ * Linux gets into trouble when it executes poorly validated
+ * paths through the BIOS, so disable _GTS and _BFS by default,
+ * but do speak up and offer the option to enable them.
+ */
+void __init acpi_gts_bfs_check(void)
+{
+ acpi_handle dummy;
+
+ if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy)))
+ {
+ printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
+ printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
+ "please notify linux-acpi@vger.kernel.org\n");
+ }
+ if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy)))
+ {
+ printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
+ printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
+ "please notify linux-acpi@vger.kernel.org\n");
+ }
+}
+
int __init acpi_sleep_init(void)
{
acpi_status status;
@@ -771,5 +797,6 @@ int __init acpi_sleep_init(void)
* object can also be evaluated when the system enters S5.
*/
register_reboot_notifier(&tts_notifier);
+ acpi_gts_bfs_check();
return 0;
}
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index da51f05ef8d8..0944daec064f 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -38,6 +38,7 @@ ACPI_MODULE_NAME("system");
#define ACPI_SYSTEM_DEVICE_NAME "System"
u32 acpi_irq_handled;
+u32 acpi_irq_not_handled;
/*
* Make ACPICA version work as module param
@@ -214,8 +215,9 @@ err:
#define COUNT_GPE 0
#define COUNT_SCI 1 /* acpi_irq_handled */
-#define COUNT_ERROR 2 /* other */
-#define NUM_COUNTERS_EXTRA 3
+#define COUNT_SCI_NOT 2 /* acpi_irq_not_handled */
+#define COUNT_ERROR 3 /* other */
+#define NUM_COUNTERS_EXTRA 4
struct event_counter {
u32 count;
@@ -317,6 +319,8 @@ static ssize_t counter_show(struct kobject *kobj,
all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI].count =
acpi_irq_handled;
+ all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT].count =
+ acpi_irq_not_handled;
all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE].count =
acpi_gpe_count;
@@ -363,6 +367,7 @@ static ssize_t counter_set(struct kobject *kobj,
all_counters[i].count = 0;
acpi_gpe_count = 0;
acpi_irq_handled = 0;
+ acpi_irq_not_handled = 0;
goto end;
}
@@ -456,6 +461,8 @@ void acpi_irq_stats_init(void)
sprintf(buffer, "gpe_all");
else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI)
sprintf(buffer, "sci");
+ else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT)
+ sprintf(buffer, "sci_not");
else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR)
sprintf(buffer, "error");
else
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 9cd15e8c8932..564ea1424288 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -909,7 +909,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
thermal_zone_device_register("acpitz", trips, tz,
&acpi_thermal_zone_ops,
0, 0, 0,
- tz->polling_frequency);
+ tz->polling_frequency*100);
if (IS_ERR(tz->thermal_zone))
return -ENODEV;
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index cd4fb7543a90..1bdfb37377e3 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -538,6 +538,57 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
return -EINVAL;
}
+/*
+ * For some buggy _BQC methods, we need to add a constant value to
+ * the _BQC return value to get the actual current brightness level
+ */
+
+static int bqc_offset_aml_bug_workaround;
+static int __init video_set_bqc_offset(const struct dmi_system_id *d)
+{
+ bqc_offset_aml_bug_workaround = 9;
+ return 0;
+}
+
+static struct dmi_system_id video_dmi_table[] __initdata = {
+ /*
+ * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
+ */
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5720",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5710Z",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "eMachines E510",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5315",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
+ },
+ },
+ {}
+};
+
static int
acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
unsigned long long *level)
@@ -557,6 +608,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
*level = device->brightness->levels[*level + 2];
}
+ *level += bqc_offset_aml_bug_workaround;
device->brightness->curr = *level;
return 0;
} else {
@@ -770,10 +822,12 @@ acpi_video_init_brightness(struct acpi_video_device *device)
* In this case, the first two elements in _BCL packages
* are also supported brightness levels that OS should take care of.
*/
- for (i = 2; i < count; i++)
- if (br->levels[i] == br->levels[0] ||
- br->levels[i] == br->levels[1])
+ for (i = 2; i < count; i++) {
+ if (br->levels[i] == br->levels[0])
level_ac_battery++;
+ if (br->levels[i] == br->levels[1])
+ level_ac_battery++;
+ }
if (level_ac_battery < 2) {
level_ac_battery = 2 - level_ac_battery;
@@ -807,12 +861,19 @@ acpi_video_init_brightness(struct acpi_video_device *device)
br->flags._BCM_use_index = br->flags._BCL_use_index;
/* _BQC uses INDEX while _BCL uses VALUE in some laptops */
- br->curr = max_level;
+ br->curr = level_old = max_level;
+
+ if (!device->cap._BQC)
+ goto set_level;
+
result = acpi_video_device_lcd_get_level_current(device, &level_old);
if (result)
goto out_free_levels;
- result = acpi_video_device_lcd_set_level(device, br->curr);
+ /*
+ * Set the level to maximum and check if _BQC uses indexed value
+ */
+ result = acpi_video_device_lcd_set_level(device, max_level);
if (result)
goto out_free_levels;
@@ -820,25 +881,19 @@ acpi_video_init_brightness(struct acpi_video_device *device)
if (result)
goto out_free_levels;
- if ((level != level_old) && !br->flags._BCM_use_index) {
- /* Note:
- * This piece of code does not work correctly if the current
- * brightness levels is 0.
- * But I guess boxes that boot with such a dark screen are rare
- * and no more code is needed to cover this specifial case.
- */
-
- if (level_ac_battery != 2) {
- /*
- * For now, we don't support the _BCL like this:
- * 16, 15, 0, 1, 2, 3, ..., 14, 15, 16
- * because we may mess up the index returned by _BQC.
- * Plus: we have not got a box like this.
- */
- ACPI_ERROR((AE_INFO, "_BCL not supported\n"));
- }
- br->flags._BQC_use_index = 1;
- }
+ br->flags._BQC_use_index = (level == max_level ? 0 : 1);
+
+ if (!br->flags._BQC_use_index)
+ goto set_level;
+
+ if (br->flags._BCL_reversed)
+ level_old = (br->count - 1) - level_old;
+ level_old = br->levels[level_old];
+
+set_level:
+ result = acpi_video_device_lcd_set_level(device, level_old);
+ if (result)
+ goto out_free_levels;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"found %d brightness levels\n", count - 2));
@@ -2287,13 +2342,15 @@ EXPORT_SYMBOL(acpi_video_register);
static int __init acpi_video_init(void)
{
+ dmi_check_system(video_dmi_table);
+
if (intel_opregion_present())
return 0;
return acpi_video_register();
}
-static void __exit acpi_video_exit(void)
+void acpi_video_exit(void)
{
acpi_bus_unregister_driver(&acpi_video_bus);
@@ -2302,6 +2359,7 @@ static void __exit acpi_video_exit(void)
return;
}
+EXPORT_SYMBOL(acpi_video_exit);
module_init(acpi_video_init);
module_exit(acpi_video_exit);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 09:53:38 +0000