summaryrefslogtreecommitdiff
path: root/drivers/acpi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi')
-rw-r--r--drivers/acpi/acpi_lpss.c12
-rw-r--r--drivers/acpi/acpi_platform.c5
-rw-r--r--drivers/acpi/button.c9
-rw-r--r--drivers/acpi/ec.c49
-rw-r--r--drivers/acpi/osl.c2
-rw-r--r--drivers/acpi/sysfs.c9
-rw-r--r--drivers/acpi/thermal.c43
-rw-r--r--drivers/acpi/utils.c17
8 files changed, 82 insertions, 64 deletions
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index fb78bb9ad8f6..d3961014aad7 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -30,6 +30,7 @@ ACPI_MODULE_NAME("acpi_lpss");
/* Offsets relative to LPSS_PRIVATE_OFFSET */
#define LPSS_GENERAL 0x08
#define LPSS_GENERAL_LTR_MODE_SW BIT(2)
+#define LPSS_GENERAL_UART_RTS_OVRD BIT(3)
#define LPSS_SW_LTR 0x10
#define LPSS_AUTO_LTR 0x14
#define LPSS_TX_INT 0x20
@@ -68,11 +69,16 @@ struct lpss_private_data {
static void lpss_uart_setup(struct lpss_private_data *pdata)
{
- unsigned int tx_int_offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
+ unsigned int offset;
u32 reg;
- reg = readl(pdata->mmio_base + tx_int_offset);
- writel(reg | LPSS_TX_INT_MASK, pdata->mmio_base + tx_int_offset);
+ offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
+ reg = readl(pdata->mmio_base + offset);
+ writel(reg | LPSS_TX_INT_MASK, pdata->mmio_base + offset);
+
+ offset = pdata->dev_desc->prv_offset + LPSS_GENERAL;
+ reg = readl(pdata->mmio_base + offset);
+ writel(reg | LPSS_GENERAL_UART_RTS_OVRD, pdata->mmio_base + offset);
}
static struct lpss_device_desc lpt_dev_desc = {
diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c
index c20b02beec7c..aef79db906fe 100644
--- a/drivers/acpi/acpi_platform.c
+++ b/drivers/acpi/acpi_platform.c
@@ -31,6 +31,11 @@ static const struct acpi_device_id acpi_platform_device_ids[] = {
{ "PNP0D40" },
{ "ACPI0003" },
{ "VPC2004" },
+
+ /* Intel Smart Sound Technology */
+ { "INT33C8" },
+ { "80860F28" },
+
{ }
};
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index a55773801c5f..c971929d75c2 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -383,18 +383,15 @@ static int acpi_button_add(struct acpi_device *device)
switch (button->type) {
case ACPI_BUTTON_TYPE_POWER:
- input->evbit[0] = BIT_MASK(EV_KEY);
- set_bit(KEY_POWER, input->keybit);
+ input_set_capability(input, EV_KEY, KEY_POWER);
break;
case ACPI_BUTTON_TYPE_SLEEP:
- input->evbit[0] = BIT_MASK(EV_KEY);
- set_bit(KEY_SLEEP, input->keybit);
+ input_set_capability(input, EV_KEY, KEY_SLEEP);
break;
case ACPI_BUTTON_TYPE_LID:
- input->evbit[0] = BIT_MASK(EV_SW);
- set_bit(SW_LID, input->swbit);
+ input_set_capability(input, EV_SW, SW_LID);
break;
}
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index a06d98374705..d5309fd49458 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -28,6 +28,7 @@
/* Uncomment next line to get verbose printout */
/* #define DEBUG */
+#define pr_fmt(fmt) "ACPI : EC: " fmt
#include <linux/kernel.h>
#include <linux/module.h>
@@ -49,9 +50,6 @@
#define ACPI_EC_DEVICE_NAME "Embedded Controller"
#define ACPI_EC_FILE_INFO "info"
-#undef PREFIX
-#define PREFIX "ACPI: EC: "
-
/* EC status register */
#define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
#define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
@@ -131,26 +129,26 @@ static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */
static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
{
u8 x = inb(ec->command_addr);
- pr_debug(PREFIX "---> status = 0x%2.2x\n", x);
+ pr_debug("---> status = 0x%2.2x\n", x);
return x;
}
static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
{
u8 x = inb(ec->data_addr);
- pr_debug(PREFIX "---> data = 0x%2.2x\n", x);
+ pr_debug("---> data = 0x%2.2x\n", x);
return x;
}
static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
{
- pr_debug(PREFIX "<--- command = 0x%2.2x\n", command);
+ pr_debug("<--- command = 0x%2.2x\n", command);
outb(command, ec->command_addr);
}
static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data)
{
- pr_debug(PREFIX "<--- data = 0x%2.2x\n", data);
+ pr_debug("<--- data = 0x%2.2x\n", data);
outb(data, ec->data_addr);
}
@@ -241,7 +239,7 @@ static int ec_poll(struct acpi_ec *ec)
}
advance_transaction(ec, acpi_ec_read_status(ec));
} while (time_before(jiffies, delay));
- pr_debug(PREFIX "controller reset, restart transaction\n");
+ pr_debug("controller reset, restart transaction\n");
spin_lock_irqsave(&ec->lock, flags);
start_transaction(ec);
spin_unlock_irqrestore(&ec->lock, flags);
@@ -309,12 +307,12 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
}
}
if (ec_wait_ibf0(ec)) {
- pr_err(PREFIX "input buffer is not empty, "
+ pr_err("input buffer is not empty, "
"aborting transaction\n");
status = -ETIME;
goto end;
}
- pr_debug(PREFIX "transaction start (cmd=0x%02x, addr=0x%02x)\n",
+ pr_debug("transaction start (cmd=0x%02x, addr=0x%02x)\n",
t->command, t->wdata ? t->wdata[0] : 0);
/* disable GPE during transaction if storm is detected */
if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
@@ -331,12 +329,12 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
/* It is safe to enable the GPE outside of the transaction. */
acpi_enable_gpe(NULL, ec->gpe);
} else if (t->irq_count > ec_storm_threshold) {
- pr_info(PREFIX "GPE storm detected(%d GPEs), "
+ pr_info("GPE storm detected(%d GPEs), "
"transactions will use polling mode\n",
t->irq_count);
set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
}
- pr_debug(PREFIX "transaction end\n");
+ pr_debug("transaction end\n");
end:
if (ec->global_lock)
acpi_release_global_lock(glk);
@@ -570,12 +568,12 @@ static void acpi_ec_run(void *cxt)
struct acpi_ec_query_handler *handler = cxt;
if (!handler)
return;
- pr_debug(PREFIX "start query execution\n");
+ pr_debug("start query execution\n");
if (handler->func)
handler->func(handler->data);
else if (handler->handle)
acpi_evaluate_object(handler->handle, NULL, NULL, NULL);
- pr_debug(PREFIX "stop query execution\n");
+ pr_debug("stop query execution\n");
kfree(handler);
}
@@ -593,7 +591,8 @@ static int acpi_ec_sync_query(struct acpi_ec *ec)
if (!copy)
return -ENOMEM;
memcpy(copy, handler, sizeof(*copy));
- pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value);
+ pr_debug("push query execution (0x%2x) on queue\n",
+ value);
return acpi_os_execute((copy->func) ?
OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER,
acpi_ec_run, copy);
@@ -616,7 +615,7 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state)
{
if (state & ACPI_EC_FLAG_SCI) {
if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) {
- pr_debug(PREFIX "push gpe query to the queue\n");
+ pr_debug("push gpe query to the queue\n");
return acpi_os_execute(OSL_NOTIFY_HANDLER,
acpi_ec_gpe_query, ec);
}
@@ -630,7 +629,7 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device,
struct acpi_ec *ec = data;
u8 status = acpi_ec_read_status(ec);
- pr_debug(PREFIX "~~~> interrupt, status:0x%02x\n", status);
+ pr_debug("~~~> interrupt, status:0x%02x\n", status);
advance_transaction(ec, status);
if (ec_transaction_done(ec) &&
@@ -776,7 +775,7 @@ static int ec_install_handlers(struct acpi_ec *ec)
* The AE_NOT_FOUND error will be ignored and OS
* continue to initialize EC.
*/
- printk(KERN_ERR "Fail in evaluating the _REG object"
+ pr_err("Fail in evaluating the _REG object"
" of EC device. Broken bios is suspected.\n");
} else {
acpi_remove_gpe_handler(NULL, ec->gpe,
@@ -795,10 +794,10 @@ static void ec_remove_handlers(struct acpi_ec *ec)
acpi_disable_gpe(NULL, ec->gpe);
if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
- pr_err(PREFIX "failed to remove space handler\n");
+ pr_err("failed to remove space handler\n");
if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
&acpi_ec_gpe_handler)))
- pr_err(PREFIX "failed to remove gpe handler\n");
+ pr_err("failed to remove gpe handler\n");
clear_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags);
}
@@ -840,7 +839,7 @@ static int acpi_ec_add(struct acpi_device *device)
ret = !!request_region(ec->command_addr, 1, "EC cmd");
WARN(!ret, "Could not request EC cmd io port 0x%lx", ec->command_addr);
- pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
+ pr_info("GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
ec->gpe, ec->command_addr, ec->data_addr);
ret = ec_install_handlers(ec);
@@ -931,7 +930,7 @@ static int ec_validate_ecdt(const struct dmi_system_id *id)
/* MSI EC needs special treatment, enable it */
static int ec_flag_msi(const struct dmi_system_id *id)
{
- printk(KERN_DEBUG PREFIX "Detected MSI hardware, enabling workarounds.\n");
+ pr_debug("Detected MSI hardware, enabling workarounds.\n");
EC_FLAGS_MSI = 1;
EC_FLAGS_VALIDATE_ECDT = 1;
return 0;
@@ -1010,7 +1009,7 @@ int __init acpi_ec_ecdt_probe(void)
status = acpi_get_table(ACPI_SIG_ECDT, 1,
(struct acpi_table_header **)&ecdt_ptr);
if (ACPI_SUCCESS(status)) {
- pr_info(PREFIX "EC description table is found, configuring boot EC\n");
+ pr_info("EC description table is found, configuring boot EC\n");
boot_ec->command_addr = ecdt_ptr->control.address;
boot_ec->data_addr = ecdt_ptr->data.address;
boot_ec->gpe = ecdt_ptr->gpe;
@@ -1030,7 +1029,7 @@ int __init acpi_ec_ecdt_probe(void)
/* This workaround is needed only on some broken machines,
* which require early EC, but fail to provide ECDT */
- printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
+ pr_debug("Look up EC in DSDT\n");
status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device,
boot_ec, NULL);
/* Check that acpi_get_devices actually find something */
@@ -1042,7 +1041,7 @@ int __init acpi_ec_ecdt_probe(void)
saved_ec->data_addr != boot_ec->data_addr ||
saved_ec->gpe != boot_ec->gpe ||
saved_ec->handle != boot_ec->handle)
- pr_info(PREFIX "ASUSTek keeps feeding us with broken "
+ pr_info("ASUSTek keeps feeding us with broken "
"ECDT tables, which are very hard to workaround. "
"Trying to use DSDT EC info instead. Please send "
"output of acpidump to linux-acpi@vger.kernel.org\n");
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index e5f416c7f66e..b1629b571cb2 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -820,7 +820,7 @@ acpi_status acpi_os_remove_interrupt_handler(u32 irq, acpi_osd_handler handler)
void acpi_os_sleep(u64 ms)
{
- schedule_timeout_interruptible(msecs_to_jiffies(ms));
+ msleep(ms);
}
void acpi_os_stall(u32 us)
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index 05306a59aedc..b55778704444 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -564,6 +564,7 @@ static ssize_t counter_set(struct kobject *kobj,
acpi_event_status status;
acpi_handle handle;
int result = 0;
+ unsigned long tmp;
if (index == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI) {
int i;
@@ -596,8 +597,10 @@ static ssize_t counter_set(struct kobject *kobj,
else if (!strcmp(buf, "clear\n") &&
(status & ACPI_EVENT_FLAG_SET))
result = acpi_clear_gpe(handle, index);
+ else if (!kstrtoul(buf, 0, &tmp))
+ all_counters[index].count = tmp;
else
- all_counters[index].count = strtoul(buf, NULL, 0);
+ result = -EINVAL;
} else if (index < num_gpes + ACPI_NUM_FIXED_EVENTS) {
int event = index - num_gpes;
if (!strcmp(buf, "disable\n") &&
@@ -609,8 +612,10 @@ static ssize_t counter_set(struct kobject *kobj,
else if (!strcmp(buf, "clear\n") &&
(status & ACPI_EVENT_FLAG_SET))
result = acpi_clear_event(event);
+ else if (!kstrtoul(buf, 0, &tmp))
+ all_counters[index].count = tmp;
else
- all_counters[index].count = strtoul(buf, NULL, 0);
+ result = -EINVAL;
} else
all_counters[index].count = strtoul(buf, NULL, 0);
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 6a0329340b42..e600b5dbfcb6 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -299,8 +299,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No critical threshold\n"));
} else if (tmp <= 2732) {
- printk(KERN_WARNING FW_BUG "Invalid critical threshold "
- "(%llu)\n", tmp);
+ pr_warn(FW_BUG "Invalid critical threshold (%llu)\n",
+ tmp);
tz->trips.critical.flags.valid = 0;
} else {
tz->trips.critical.flags.valid = 1;
@@ -317,8 +317,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
* Allow override critical threshold
*/
if (crt_k > tz->trips.critical.temperature)
- printk(KERN_WARNING PREFIX
- "Critical threshold %d C\n", crt);
+ pr_warn(PREFIX "Critical threshold %d C\n",
+ crt);
tz->trips.critical.temperature = crt_k;
}
}
@@ -390,8 +390,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
status = acpi_evaluate_reference(tz->device->handle, "_PSL",
NULL, &devices);
if (ACPI_FAILURE(status)) {
- printk(KERN_WARNING PREFIX
- "Invalid passive threshold\n");
+ pr_warn(PREFIX "Invalid passive threshold\n");
tz->trips.passive.flags.valid = 0;
}
else
@@ -453,8 +452,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
status = acpi_evaluate_reference(tz->device->handle,
name, NULL, &devices);
if (ACPI_FAILURE(status)) {
- printk(KERN_WARNING PREFIX
- "Invalid active%d threshold\n", i);
+ pr_warn(PREFIX "Invalid active%d threshold\n",
+ i);
tz->trips.active[i].flags.valid = 0;
}
else
@@ -505,7 +504,7 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
valid |= tz->trips.active[i].flags.valid;
if (!valid) {
- printk(KERN_WARNING FW_BUG "No valid trip found\n");
+ pr_warn(FW_BUG "No valid trip found\n");
return -ENODEV;
}
return 0;
@@ -923,8 +922,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
acpi_bus_private_data_handler,
tz->thermal_zone);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX
- "Error attaching device data\n");
+ pr_err(PREFIX "Error attaching device data\n");
return -ENODEV;
}
@@ -1094,9 +1092,8 @@ static int acpi_thermal_add(struct acpi_device *device)
if (result)
goto free_memory;
- printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
- acpi_device_name(device), acpi_device_bid(device),
- KELVIN_TO_CELSIUS(tz->temperature));
+ pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device),
+ acpi_device_bid(device), KELVIN_TO_CELSIUS(tz->temperature));
goto end;
free_memory:
@@ -1159,24 +1156,24 @@ static int acpi_thermal_resume(struct device *dev)
static int thermal_act(const struct dmi_system_id *d) {
if (act == 0) {
- printk(KERN_NOTICE "ACPI: %s detected: "
- "disabling all active thermal trip points\n", d->ident);
+ pr_notice(PREFIX "%s detected: "
+ "disabling all active thermal trip points\n", d->ident);
act = -1;
}
return 0;
}
static int thermal_nocrt(const struct dmi_system_id *d) {
- printk(KERN_NOTICE "ACPI: %s detected: "
- "disabling all critical thermal trip point actions.\n", d->ident);
+ pr_notice(PREFIX "%s detected: "
+ "disabling all critical thermal trip point actions.\n", d->ident);
nocrt = 1;
return 0;
}
static int thermal_tzp(const struct dmi_system_id *d) {
if (tzp == 0) {
- printk(KERN_NOTICE "ACPI: %s detected: "
- "enabling thermal zone polling\n", d->ident);
+ pr_notice(PREFIX "%s detected: "
+ "enabling thermal zone polling\n", d->ident);
tzp = 300; /* 300 dS = 30 Seconds */
}
return 0;
@@ -1184,8 +1181,8 @@ static int thermal_tzp(const struct dmi_system_id *d) {
static int thermal_psv(const struct dmi_system_id *d) {
if (psv == 0) {
- printk(KERN_NOTICE "ACPI: %s detected: "
- "disabling all passive thermal trip points\n", d->ident);
+ pr_notice(PREFIX "%s detected: "
+ "disabling all passive thermal trip points\n", d->ident);
psv = -1;
}
return 0;
@@ -1238,7 +1235,7 @@ static int __init acpi_thermal_init(void)
dmi_check_system(thermal_dmi_table);
if (off) {
- printk(KERN_NOTICE "ACPI: thermal control disabled\n");
+ pr_notice(PREFIX "thermal control disabled\n");
return -ENODEV;
}
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 552248b0005b..fc2cd3284080 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -169,11 +169,20 @@ acpi_extract_package(union acpi_object *package,
/*
* Validate output buffer.
*/
- if (buffer->length < size_required) {
+ if (buffer->length == ACPI_ALLOCATE_BUFFER) {
+ buffer->pointer = ACPI_ALLOCATE(size_required);
+ if (!buffer->pointer)
+ return AE_NO_MEMORY;
buffer->length = size_required;
- return AE_BUFFER_OVERFLOW;
- } else if (buffer->length != size_required || !buffer->pointer) {
- return AE_BAD_PARAMETER;
+ memset(buffer->pointer, 0, size_required);
+ } else {
+ if (buffer->length < size_required) {
+ buffer->length = size_required;
+ return AE_BUFFER_OVERFLOW;
+ } else if (buffer->length != size_required ||
+ !buffer->pointer) {
+ return AE_BAD_PARAMETER;
+ }
}
head = buffer->pointer;
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 00:47:12 +0000