diff options
Diffstat (limited to 'arch/xtensa')
| -rw-r--r-- | arch/xtensa/Kconfig | 3 | ||||
| -rw-r--r-- | arch/xtensa/boot/dts/xtfpga.dtsi | 12 | ||||
| -rw-r--r-- | arch/xtensa/include/asm/io.h | 2 | ||||
| -rw-r--r-- | arch/xtensa/include/asm/traps.h | 44 | ||||
| -rw-r--r-- | arch/xtensa/include/asm/vectors.h | 2 | ||||
| -rw-r--r-- | arch/xtensa/include/uapi/asm/unistd.h | 7 | ||||
| -rw-r--r-- | arch/xtensa/kernel/entry.S | 449 | ||||
| -rw-r--r-- | arch/xtensa/kernel/setup.c | 2 | ||||
| -rw-r--r-- | arch/xtensa/kernel/time.c | 1 | ||||
| -rw-r--r-- | arch/xtensa/kernel/vectors.S | 2 | ||||
| -rw-r--r-- | arch/xtensa/kernel/xtensa_ksyms.c | 2 | ||||
| -rw-r--r-- | arch/xtensa/mm/init.c | 13 | ||||
| -rw-r--r-- | arch/xtensa/mm/mmu.c | 2 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/setup.c | 7 | ||||
| -rw-r--r-- | arch/xtensa/variants/fsf/include/variant/tie.h | 9 |
15 files changed, 297 insertions, 260 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index ba56e11cbf77..c87ae7c6e5f9 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -20,6 +20,7 @@ config XTENSA select HAVE_FUNCTION_TRACER select HAVE_IRQ_TIME_ACCOUNTING select HAVE_PERF_EVENTS + select COMMON_CLK help Xtensa processors are 32-bit RISC machines designed by Tensilica primarily for embedded systems. These processors are both @@ -80,7 +81,6 @@ choice config XTENSA_VARIANT_FSF bool "fsf - default (not generic) configuration" select MMU - select HAVE_XTENSA_GPIO32 config XTENSA_VARIANT_DC232B bool "dc232b - Diamond 232L Standard Core Rev.B (LE)" @@ -135,7 +135,6 @@ config HAVE_SMP config SMP bool "Enable Symmetric multi-processing support" depends on HAVE_SMP - select USE_GENERIC_SMP_HELPERS select GENERIC_SMP_IDLE_THREAD help Enabled SMP Software; allows more than one CPU/CORE diff --git a/arch/xtensa/boot/dts/xtfpga.dtsi b/arch/xtensa/boot/dts/xtfpga.dtsi index 46b4f5eab421..e7370b11348e 100644 --- a/arch/xtensa/boot/dts/xtfpga.dtsi +++ b/arch/xtensa/boot/dts/xtfpga.dtsi @@ -35,6 +35,13 @@ interrupt-controller; }; + clocks { + osc: main-oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + }; + serial0: serial@fd050020 { device_type = "serial"; compatible = "ns16550a"; @@ -42,9 +49,7 @@ reg = <0xfd050020 0x20>; reg-shift = <2>; interrupts = <0 1>; /* external irq 0 */ - /* Filled in by platform_setup from FPGA register - * clock-frequency = <100000000>; - */ + clocks = <&osc>; }; enet0: ethoc@fd030000 { @@ -52,5 +57,6 @@ reg = <0xfd030000 0x4000 0xfd800000 0x4000>; interrupts = <1 1>; /* external irq 1 */ local-mac-address = [00 50 c2 13 6f 00]; + clocks = <&osc>; }; }; diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index 2a042d430c25..74944207167e 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -25,7 +25,7 @@ #ifdef CONFIG_MMU -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF +#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) extern unsigned long xtensa_kio_paddr; static inline unsigned long xtensa_get_kio_paddr(void) diff --git a/arch/xtensa/include/asm/traps.h b/arch/xtensa/include/asm/traps.h index 8c194f6af45e..677bfcf4ee5d 100644 --- a/arch/xtensa/include/asm/traps.h +++ b/arch/xtensa/include/asm/traps.h @@ -23,25 +23,37 @@ void secondary_trap_init(void); static inline void spill_registers(void) { - +#if XCHAL_NUM_AREGS > 16 __asm__ __volatile__ ( - "movi a14, "__stringify((1 << PS_EXCM_BIT) | LOCKLEVEL)"\n\t" - "mov a12, a0\n\t" - "rsr a13, sar\n\t" - "xsr a14, ps\n\t" - "movi a0, _spill_registers\n\t" - "rsync\n\t" - "callx0 a0\n\t" - "mov a0, a12\n\t" - "wsr a13, sar\n\t" - "wsr a14, ps\n\t" - : : -#if defined(CONFIG_FRAME_POINTER) - : "a2", "a3", "a4", "a11", "a12", "a13", "a14", "a15", + " call12 1f\n" + " _j 2f\n" + " retw\n" + " .align 4\n" + "1:\n" + " _entry a1, 48\n" + " addi a12, a0, 3\n" +#if XCHAL_NUM_AREGS > 32 + " .rept (" __stringify(XCHAL_NUM_AREGS) " - 32) / 12\n" + " _entry a1, 48\n" + " mov a12, a0\n" + " .endr\n" +#endif + " _entry a1, 48\n" +#if XCHAL_NUM_AREGS % 12 == 0 + " mov a8, a8\n" +#elif XCHAL_NUM_AREGS % 12 == 4 + " mov a12, a12\n" +#elif XCHAL_NUM_AREGS % 12 == 8 + " mov a4, a4\n" +#endif + " retw\n" + "2:\n" + : : : "a12", "a13", "memory"); #else - : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", + __asm__ __volatile__ ( + " mov a12, a12\n" + : : : "memory"); #endif - "memory"); } #endif /* _XTENSA_TRAPS_H */ diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h index 5791b45d5a5d..f74ddfbb92ef 100644 --- a/arch/xtensa/include/asm/vectors.h +++ b/arch/xtensa/include/asm/vectors.h @@ -25,7 +25,7 @@ #define XCHAL_KIO_DEFAULT_PADDR 0xf0000000 #define XCHAL_KIO_SIZE 0x10000000 -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF +#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) #define XCHAL_KIO_PADDR xtensa_get_kio_paddr() #else #define XCHAL_KIO_PADDR XCHAL_KIO_DEFAULT_PADDR diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h index 51940fec6990..b9395529f02d 100644 --- a/arch/xtensa/include/uapi/asm/unistd.h +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -734,7 +734,12 @@ __SYSCALL(332, sys_finit_module, 3) #define __NR_accept4 333 __SYSCALL(333, sys_accept4, 4) -#define __NR_syscall_count 334 +#define __NR_sched_setattr 334 +__SYSCALL(334, sys_sched_setattr, 2) +#define __NR_sched_getattr 335 +__SYSCALL(335, sys_sched_getattr, 3) + +#define __NR_syscall_count 336 /* * sysxtensa syscall handler diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 21dbe6bdb8ed..ef7f4990722b 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1081,196 +1081,53 @@ ENTRY(fast_syscall_spill_registers) rsr a0, sar s32i a3, a2, PT_AREG3 - s32i a4, a2, PT_AREG4 - s32i a0, a2, PT_AREG5 # store SAR to PT_AREG5 + s32i a0, a2, PT_SAR - /* The spill routine might clobber a7, a11, and a15. */ + /* The spill routine might clobber a4, a7, a8, a11, a12, and a15. */ + s32i a4, a2, PT_AREG4 s32i a7, a2, PT_AREG7 + s32i a8, a2, PT_AREG8 s32i a11, a2, PT_AREG11 + s32i a12, a2, PT_AREG12 s32i a15, a2, PT_AREG15 - call0 _spill_registers # destroys a3, a4, and SAR - - /* Advance PC, restore registers and SAR, and return from exception. */ - - l32i a3, a2, PT_AREG5 - l32i a4, a2, PT_AREG4 - l32i a0, a2, PT_AREG0 - wsr a3, sar - l32i a3, a2, PT_AREG3 - - /* Restore clobbered registers. */ - - l32i a7, a2, PT_AREG7 - l32i a11, a2, PT_AREG11 - l32i a15, a2, PT_AREG15 - - movi a2, 0 - rfe - -ENDPROC(fast_syscall_spill_registers) - -/* Fixup handler. - * - * We get here if the spill routine causes an exception, e.g. tlb miss. - * We basically restore WINDOWBASE and WINDOWSTART to the condition when - * we entered the spill routine and jump to the user exception handler. - * - * a0: value of depc, original value in depc - * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE - * a3: exctable, original value in excsave1 - */ - -ENTRY(fast_syscall_spill_registers_fixup) - - rsr a2, windowbase # get current windowbase (a2 is saved) - xsr a0, depc # restore depc and a0 - ssl a2 # set shift (32 - WB) - - /* We need to make sure the current registers (a0-a3) are preserved. - * To do this, we simply set the bit for the current window frame - * in WS, so that the exception handlers save them to the task stack. - */ - - xsr a3, excsave1 # get spill-mask - slli a3, a3, 1 # shift left by one - - slli a2, a3, 32-WSBITS - src a2, a3, a2 # a2 = xxwww1yyxxxwww1yy...... - wsr a2, windowstart # set corrected windowstart - - srli a3, a3, 1 - rsr a2, excsave1 - l32i a2, a2, EXC_TABLE_DOUBLE_SAVE # restore a2 - xsr a2, excsave1 - s32i a3, a2, EXC_TABLE_DOUBLE_SAVE # save a3 - l32i a3, a2, EXC_TABLE_PARAM # original WB (in user task) - xsr a2, excsave1 - - /* Return to the original (user task) WINDOWBASE. - * We leave the following frame behind: - * a0, a1, a2 same - * a3: trashed (saved in EXC_TABLE_DOUBLE_SAVE) - * depc: depc (we have to return to that address) - * excsave_1: exctable - */ - - wsr a3, windowbase - rsync - - /* We are now in the original frame when we entered _spill_registers: - * a0: return address - * a1: used, stack pointer - * a2: kernel stack pointer - * a3: available - * depc: exception address - * excsave: exctable - * Note: This frame might be the same as above. - */ - - /* Setup stack pointer. */ - - addi a2, a2, -PT_USER_SIZE - s32i a0, a2, PT_AREG0 - - /* Make sure we return to this fixup handler. */ - - movi a3, fast_syscall_spill_registers_fixup_return - s32i a3, a2, PT_DEPC # setup depc - - /* Jump to the exception handler. */ - - rsr a3, excsave1 - rsr a0, exccause - addx4 a0, a0, a3 # find entry in table - l32i a0, a0, EXC_TABLE_FAST_USER # load handler - l32i a3, a3, EXC_TABLE_DOUBLE_SAVE - jx a0 - -ENDPROC(fast_syscall_spill_registers_fixup) - -ENTRY(fast_syscall_spill_registers_fixup_return) - - /* When we return here, all registers have been restored (a2: DEPC) */ - - wsr a2, depc # exception address - - /* Restore fixup handler. */ - - rsr a2, excsave1 - s32i a3, a2, EXC_TABLE_DOUBLE_SAVE - movi a3, fast_syscall_spill_registers_fixup - s32i a3, a2, EXC_TABLE_FIXUP - rsr a3, windowbase - s32i a3, a2, EXC_TABLE_PARAM - l32i a2, a2, EXC_TABLE_KSTK - - /* Load WB at the time the exception occurred. */ - - rsr a3, sar # WB is still in SAR - neg a3, a3 - wsr a3, windowbase - rsync - - rsr a3, excsave1 - l32i a3, a3, EXC_TABLE_DOUBLE_SAVE - - rfde - -ENDPROC(fast_syscall_spill_registers_fixup_return) - -/* - * spill all registers. - * - * This is not a real function. The following conditions must be met: - * - * - must be called with call0. - * - uses a3, a4 and SAR. - * - the last 'valid' register of each frame are clobbered. - * - the caller must have registered a fixup handler - * (or be inside a critical section) - * - PS_EXCM must be set (PS_WOE cleared?) - */ - -ENTRY(_spill_registers) - /* * Rotate ws so that the current windowbase is at bit 0. * Assume ws = xxxwww1yy (www1 current window frame). * Rotate ws right so that a4 = yyxxxwww1. */ - rsr a4, windowbase + rsr a0, windowbase rsr a3, windowstart # a3 = xxxwww1yy - ssr a4 # holds WB - slli a4, a3, WSBITS - or a3, a3, a4 # a3 = xxxwww1yyxxxwww1yy + ssr a0 # holds WB + slli a0, a3, WSBITS + or a3, a3, a0 # a3 = xxxwww1yyxxxwww1yy srl a3, a3 # a3 = 00xxxwww1yyxxxwww1 /* We are done if there are no more than the current register frame. */ extui a3, a3, 1, WSBITS-1 # a3 = 0yyxxxwww - movi a4, (1 << (WSBITS-1)) + movi a0, (1 << (WSBITS-1)) _beqz a3, .Lnospill # only one active frame? jump /* We want 1 at the top, so that we return to the current windowbase */ - or a3, a3, a4 # 1yyxxxwww + or a3, a3, a0 # 1yyxxxwww /* Skip empty frames - get 'oldest' WINDOWSTART-bit. */ wsr a3, windowstart # save shifted windowstart - neg a4, a3 - and a3, a4, a3 # first bit set from right: 000010000 + neg a0, a3 + and a3, a0, a3 # first bit set from right: 000010000 - ffs_ws a4, a3 # a4: shifts to skip empty frames + ffs_ws a0, a3 # a0: shifts to skip empty frames movi a3, WSBITS - sub a4, a3, a4 # WSBITS-a4:number of 0-bits from right - ssr a4 # save in SAR for later. + sub a0, a3, a0 # WSBITS-a0:number of 0-bits from right + ssr a0 # save in SAR for later. rsr a3, windowbase - add a3, a3, a4 + add a3, a3, a0 wsr a3, windowbase rsync @@ -1285,22 +1142,6 @@ ENTRY(_spill_registers) * we have to save 4,8. or 12 registers. */ - _bbsi.l a3, 1, .Lc4 - _bbsi.l a3, 2, .Lc8 - - /* Special case: we have a call12-frame starting at a4. */ - - _bbci.l a3, 3, .Lc12 # bit 3 shouldn't be zero! (Jump to Lc12 first) - - s32e a4, a1, -16 # a1 is valid with an empty spill area - l32e a4, a5, -12 - s32e a8, a4, -48 - mov a8, a4 - l32e a4, a1, -16 - j .Lc12c - -.Lnospill: - ret .Lloop: _bbsi.l a3, 1, .Lc4 _bbci.l a3, 2, .Lc12 @@ -1314,20 +1155,10 @@ ENTRY(_spill_registers) s32e a9, a4, -28 s32e a10, a4, -24 s32e a11, a4, -20 - srli a11, a3, 2 # shift windowbase by 2 rotw 2 _bnei a3, 1, .Lloop - -.Lexit: /* Done. Do the final rotation, set WS, and return. */ - - rotw 1 - rsr a3, windowbase - ssl a3 - movi a3, 1 - sll a3, a3 - wsr a3, windowstart - ret + j .Lexit .Lc4: s32e a4, a9, -16 s32e a5, a9, -12 @@ -1343,11 +1174,11 @@ ENTRY(_spill_registers) /* 12-register frame (call12) */ - l32e a2, a5, -12 - s32e a8, a2, -48 - mov a8, a2 + l32e a0, a5, -12 + s32e a8, a0, -48 + mov a8, a0 -.Lc12c: s32e a9, a8, -44 + s32e a9, a8, -44 s32e a10, a8, -40 s32e a11, a8, -36 s32e a12, a8, -32 @@ -1367,30 +1198,54 @@ ENTRY(_spill_registers) */ rotw 1 - mov a5, a13 + mov a4, a13 rotw -1 - s32e a4, a9, -16 - s32e a5, a9, -12 - s32e a6, a9, -8 - s32e a7, a9, -4 + s32e a4, a8, -16 + s32e a5, a8, -12 + s32e a6, a8, -8 + s32e a7, a8, -4 rotw 3 _beqi a3, 1, .Lexit j .Lloop -.Linvalid_mask: +.Lexit: - /* We get here because of an unrecoverable error in the window - * registers. If we are in user space, we kill the application, - * however, this condition is unrecoverable in kernel space. - */ + /* Done. Do the final rotation and set WS */ + + rotw 1 + rsr a3, windowbase + ssl a3 + movi a3, 1 + sll a3, a3 + wsr a3, windowstart +.Lnospill: + + /* Advance PC, restore registers and SAR, and return from exception. */ + + l32i a3, a2, PT_SAR + l32i a0, a2, PT_AREG0 + wsr a3, sar + l32i a3, a2, PT_AREG3 - rsr a0, ps - _bbci.l a0, PS_UM_BIT, 1f + /* Restore clobbered registers. */ - /* User space: Setup a dummy frame and kill application. + l32i a4, a2, PT_AREG4 + l32i a7, a2, PT_AREG7 + l32i a8, a2, PT_AREG8 + l32i a11, a2, PT_AREG11 + l32i a12, a2, PT_AREG12 + l32i a15, a2, PT_AREG15 + + movi a2, 0 + rfe + +.Linvalid_mask: + + /* We get here because of an unrecoverable error in the window + * registers, so set up a dummy frame and kill the user application. * Note: We assume EXC_TABLE_KSTK contains a valid stack pointer. */ @@ -1414,14 +1269,136 @@ ENTRY(_spill_registers) movi a4, do_exit callx4 a4 -1: /* Kernel space: PANIC! */ + /* shouldn't return, so panic */ wsr a0, excsave1 movi a0, unrecoverable_exception callx0 a0 # should not return 1: j 1b -ENDPROC(_spill_registers) + +ENDPROC(fast_syscall_spill_registers) + +/* Fixup handler. + * + * We get here if the spill routine causes an exception, e.g. tlb miss. + * We basically restore WINDOWBASE and WINDOWSTART to the condition when + * we entered the spill routine and jump to the user exception handler. + * + * Note that we only need to restore the bits in windowstart that have not + * been spilled yet by the _spill_register routine. Luckily, a3 contains a + * rotated windowstart with only those bits set for frames that haven't been + * spilled yet. Because a3 is rotated such that bit 0 represents the register + * frame for the current windowbase - 1, we need to rotate a3 left by the + * value of the current windowbase + 1 and move it to windowstart. + * + * a0: value of depc, original value in depc + * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE + * a3: exctable, original value in excsave1 + */ + +ENTRY(fast_syscall_spill_registers_fixup) + + rsr a2, windowbase # get current windowbase (a2 is saved) + xsr a0, depc # restore depc and a0 + ssl a2 # set shift (32 - WB) + + /* We need to make sure the current registers (a0-a3) are preserved. + * To do this, we simply set the bit for the current window frame + * in WS, so that the exception handlers save them to the task stack. + * + * Note: we use a3 to set the windowbase, so we take a special care + * of it, saving it in the original _spill_registers frame across + * the exception handler call. + */ + + xsr a3, excsave1 # get spill-mask + slli a3, a3, 1 # shift left by one + addi a3, a3, 1 # set the bit for the current window frame + + slli a2, a3, 32-WSBITS + src a2, a3, a2 # a2 = xxwww1yyxxxwww1yy...... + wsr a2, windowstart # set corrected windowstart + + srli a3, a3, 1 + rsr a2, excsave1 + l32i a2, a2, EXC_TABLE_DOUBLE_SAVE # restore a2 + xsr a2, excsave1 + s32i a3, a2, EXC_TABLE_DOUBLE_SAVE # save a3 + l32i a3, a2, EXC_TABLE_PARAM # original WB (in user task) + xsr a2, excsave1 + + /* Return to the original (user task) WINDOWBASE. + * We leave the following frame behind: + * a0, a1, a2 same + * a3: trashed (saved in EXC_TABLE_DOUBLE_SAVE) + * depc: depc (we have to return to that address) + * excsave_1: exctable + */ + + wsr a3, windowbase + rsync + + /* We are now in the original frame when we entered _spill_registers: + * a0: return address + * a1: used, stack pointer + * a2: kernel stack pointer + * a3: available + * depc: exception address + * excsave: exctable + * Note: This frame might be the same as above. + */ + + /* Setup stack pointer. */ + + addi a2, a2, -PT_USER_SIZE + s32i a0, a2, PT_AREG0 + + /* Make sure we return to this fixup handler. */ + + movi a3, fast_syscall_spill_registers_fixup_return + s32i a3, a2, PT_DEPC # setup depc + + /* Jump to the exception handler. */ + + rsr a3, excsave1 + rsr a0, exccause + addx4 a0, a0, a3 # find entry in table + l32i a0, a0, EXC_TABLE_FAST_USER # load handler + l32i a3, a3, EXC_TABLE_DOUBLE_SAVE + jx a0 + +ENDPROC(fast_syscall_spill_registers_fixup) + +ENTRY(fast_syscall_spill_registers_fixup_return) + + /* When we return here, all registers have been restored (a2: DEPC) */ + + wsr a2, depc # exception address + + /* Restore fixup handler. */ + + rsr a2, excsave1 + s32i a3, a2, EXC_TABLE_DOUBLE_SAVE + movi a3, fast_syscall_spill_registers_fixup + s32i a3, a2, EXC_TABLE_FIXUP + rsr a3, windowbase + s32i a3, a2, EXC_TABLE_PARAM + l32i a2, a2, EXC_TABLE_KSTK + + /* Load WB at the time the exception occurred. */ + + rsr a3, sar # WB is still in SAR + neg a3, a3 + wsr a3, windowbase + rsync + + rsr a3, excsave1 + l32i a3, a3, EXC_TABLE_DOUBLE_SAVE + + rfde + +ENDPROC(fast_syscall_spill_registers_fixup_return) #ifdef CONFIG_MMU /* @@ -1794,6 +1771,43 @@ ENTRY(system_call) ENDPROC(system_call) +/* + * Spill live registers on the kernel stack macro. + * + * Entry condition: ps.woe is set, ps.excm is cleared + * Exit condition: windowstart has single bit set + * May clobber: a12, a13 + */ + .macro spill_registers_kernel + +#if XCHAL_NUM_AREGS > 16 + call12 1f + _j 2f + retw + .align 4 +1: + _entry a1, 48 + addi a12, a0, 3 +#if XCHAL_NUM_AREGS > 32 + .rept (XCHAL_NUM_AREGS - 32) / 12 + _entry a1, 48 + mov a12, a0 + .endr +#endif + _entry a1, 48 +#if XCHAL_NUM_AREGS % 12 == 0 + mov a8, a8 +#elif XCHAL_NUM_AREGS % 12 == 4 + mov a12, a12 +#elif XCHAL_NUM_AREGS % 12 == 8 + mov a4, a4 +#endif + retw +2: +#else + mov a12, a12 +#endif + .endm /* * Task switch. @@ -1806,21 +1820,20 @@ ENTRY(_switch_to) entry a1, 16 - mov a12, a2 # preserve 'prev' (a2) - mov a13, a3 # and 'next' (a3) + mov a10, a2 # preserve 'prev' (a2) + mov a11, a3 # and 'next' (a3) l32i a4, a2, TASK_THREAD_INFO l32i a5, a3, TASK_THREAD_INFO - save_xtregs_user a4 a6 a8 a9 a10 a11 THREAD_XTREGS_USER + save_xtregs_user a4 a6 a8 a9 a12 a13 THREAD_XTREGS_USER - s32i a0, a12, THREAD_RA # save return address - s32i a1, a12, THREAD_SP # save stack pointer + s32i a0, a10, THREAD_RA # save return address + s32i a1, a10, THREAD_SP # save stack pointer /* Disable ints while we manipulate the stack pointer. */ - movi a14, (1 << PS_EXCM_BIT) | LOCKLEVEL - xsr a14, ps + rsil a14, LOCKLEVEL rsr a3, excsave1 rsync s32i a3, a3, EXC_TABLE_FIXUP /* enter critical section */ @@ -1835,7 +1848,7 @@ ENTRY(_switch_to) /* Flush register file. */ - call0 _spill_registers # destroys a3, a4, and SAR + spill_registers_kernel /* Set kernel stack (and leave critical section) * Note: It's save to set it here. The stack will not be overwritten @@ -1851,13 +1864,13 @@ ENTRY(_switch_to) /* restore context of the task 'next' */ - l32i a0, a13, THREAD_RA # restore return address - l32i a1, a13, THREAD_SP # restore stack pointer + l32i a0, a11, THREAD_RA # restore return address + l32i a1, a11, THREAD_SP # restore stack pointer - load_xtregs_user a5 a6 a8 a9 a10 a11 THREAD_XTREGS_USER + load_xtregs_user a5 a6 a8 a9 a12 a13 THREAD_XTREGS_USER wsr a14, ps - mov a2, a12 # return 'prev' + mov a2, a10 # return 'prev' rsync retw diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 7d12af1317f1..84fe931bb60e 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -22,6 +22,7 @@ #include <linux/bootmem.h> #include <linux/kernel.h> #include <linux/percpu.h> +#include <linux/clk-provider.h> #include <linux/cpu.h> #include <linux/of_fdt.h> #include <linux/of_platform.h> @@ -276,6 +277,7 @@ void __init early_init_devtree(void *params) static int __init xtensa_device_probe(void) { + of_clk_init(NULL); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); return 0; } diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index 08b769d3b3a1..2a1823de69cc 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -30,6 +30,7 @@ #include <asm/platform.h> unsigned long ccount_freq; /* ccount Hz */ +EXPORT_SYMBOL(ccount_freq); static cycle_t ccount_read(struct clocksource *cs) { diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S index cb8fd44caabc..f9e1ec346e35 100644 --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -235,7 +235,7 @@ ENTRY(_DoubleExceptionVector) /* Check for overflow/underflow exception, jump if overflow. */ - _bbci.l a0, 6, _DoubleExceptionVector_WindowOverflow + bbci.l a0, 6, _DoubleExceptionVector_WindowOverflow /* * Restart window underflow exception. diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c index 74a60c7e085e..80b33ed51f31 100644 --- a/arch/xtensa/kernel/xtensa_ksyms.c +++ b/arch/xtensa/kernel/xtensa_ksyms.c @@ -122,9 +122,7 @@ EXPORT_SYMBOL(insw); EXPORT_SYMBOL(insl); extern long common_exception_return; -extern long _spill_registers; EXPORT_SYMBOL(common_exception_return); -EXPORT_SYMBOL(_spill_registers); #ifdef CONFIG_FUNCTION_TRACER EXPORT_SYMBOL(_mcount); diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index 479d7537a32a..aff108df92d3 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -90,7 +90,7 @@ int __init mem_reserve(unsigned long start, unsigned long end, int must_exist) /* - * Initialize the bootmem system and give it all the memory we have available. + * Initialize the bootmem system and give it all low memory we have available. */ void __init bootmem_init(void) @@ -142,9 +142,14 @@ void __init bootmem_init(void) /* Add all remaining memory pieces into the bootmem map */ - for (i=0; i<sysmem.nr_banks; i++) - free_bootmem(sysmem.bank[i].start, - sysmem.bank[i].end - sysmem.bank[i].start); + for (i = 0; i < sysmem.nr_banks; i++) { + if (sysmem.bank[i].start >> PAGE_SHIFT < max_low_pfn) { + unsigned long end = min(max_low_pfn << PAGE_SHIFT, + sysmem.bank[i].end); + free_bootmem(sysmem.bank[i].start, + end - sysmem.bank[i].start); + } + } } diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c index 36ec171698b8..861203e958da 100644 --- a/arch/xtensa/mm/mmu.c +++ b/arch/xtensa/mm/mmu.c @@ -39,7 +39,7 @@ void init_mmu(void) set_itlbcfg_register(0); set_dtlbcfg_register(0); #endif -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF +#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) /* * Update the IO area mapping in case xtensa_kio_paddr has changed */ diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c index 800227862fe8..57fd08b36f51 100644 --- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -135,11 +135,11 @@ static void __init update_local_mac(struct device_node *node) static int __init machine_setup(void) { - struct device_node *serial; + struct device_node *clock; struct device_node *eth = NULL; - for_each_compatible_node(serial, NULL, "ns16550a") - update_clock_frequency(serial); + for_each_node_by_name(clock, "main-oscillator") + update_clock_frequency(clock); if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc"))) update_local_mac(eth); @@ -290,6 +290,7 @@ static int __init xtavnet_init(void) * knows whether they set it correctly on the DIP switches. */ pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr); + ethoc_pdata.eth_clkfreq = *(long *)XTFPGA_CLKFRQ_VADDR; return 0; } diff --git a/arch/xtensa/variants/fsf/include/variant/tie.h b/arch/xtensa/variants/fsf/include/variant/tie.h index bf4020116df5..244cdea4dee5 100644 --- a/arch/xtensa/variants/fsf/include/variant/tie.h +++ b/arch/xtensa/variants/fsf/include/variant/tie.h @@ -18,13 +18,6 @@ #define XCHAL_CP_MASK 0x00 /* bitmask of all CPs by ID */ #define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */ -/* Basic parameters of each coprocessor: */ -#define XCHAL_CP7_NAME "XTIOP" -#define XCHAL_CP7_IDENT XTIOP -#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */ -#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */ -#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */ - /* Filler info for unassigned coprocessors, to simplify arrays etc: */ #define XCHAL_NCP_SA_SIZE 0 #define XCHAL_NCP_SA_ALIGN 1 @@ -42,6 +35,8 @@ #define XCHAL_CP5_SA_ALIGN 1 #define XCHAL_CP6_SA_SIZE 0 #define XCHAL_CP6_SA_ALIGN 1 +#define XCHAL_CP7_SA_SIZE 0 +#define XCHAL_CP7_SA_ALIGN 1 /* Save area for non-coprocessor optional and custom (TIE) state: */ #define XCHAL_NCP_SA_SIZE 0 |