diff options
Diffstat (limited to 'arch/x86')
| -rw-r--r-- | arch/x86/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/boot/early_serial_console.c | 14 | ||||
| -rw-r--r-- | arch/x86/ia32/ia32entry.S | 22 | ||||
| -rw-r--r-- | arch/x86/include/asm/compat.h | 2 | ||||
| -rw-r--r-- | arch/x86/include/asm/cpufeature.h | 4 | ||||
| -rw-r--r-- | arch/x86/include/asm/hpet.h | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/x2apic_uv_x.c | 6 | ||||
| -rw-r--r-- | arch/x86/kernel/early-quirks.c | 18 | ||||
| -rw-r--r-- | arch/x86/kernel/hpet.c | 31 |
9 files changed, 51 insertions, 49 deletions
diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 8aa1b59b9074..e8c8881351b3 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -74,7 +74,7 @@ endif ifdef CONFIG_CC_STACKPROTECTOR cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh - ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(biarch)),y) + ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(KBUILD_CPPFLAGS) $(biarch)),y) stackp-y := -fstack-protector KBUILD_CFLAGS += $(stackp-y) else diff --git a/arch/x86/boot/early_serial_console.c b/arch/x86/boot/early_serial_console.c index 030f4b93e255..5df2869c874b 100644 --- a/arch/x86/boot/early_serial_console.c +++ b/arch/x86/boot/early_serial_console.c @@ -58,7 +58,19 @@ static void parse_earlyprintk(void) if (arg[pos] == ',') pos++; - if (!strncmp(arg, "ttyS", 4)) { + /* + * make sure we have + * "serial,0x3f8,115200" + * "serial,ttyS0,115200" + * "ttyS0,115200" + */ + if (pos == 7 && !strncmp(arg + pos, "0x", 2)) { + port = simple_strtoull(arg + pos, &e, 16); + if (port == 0 || arg + pos == e) + port = DEFAULT_SERIAL_PORT; + else + pos = e - arg; + } else if (!strncmp(arg + pos, "ttyS", 4)) { static const int bases[] = { 0x3f8, 0x2f8 }; int idx = 0; diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index b86feabed69b..518bb99c3394 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -50,7 +50,12 @@ /* * Reload arg registers from stack in case ptrace changed them. * We don't reload %eax because syscall_trace_enter() returned - * the value it wants us to use in the table lookup. + * the %rax value we should see. Instead, we just truncate that + * value to 32 bits again as we did on entry from user mode. + * If it's a new value set by user_regset during entry tracing, + * this matches the normal truncation of the user-mode value. + * If it's -1 to make us punt the syscall, then (u32)-1 is still + * an appropriately invalid value. */ .macro LOAD_ARGS32 offset, _r9=0 .if \_r9 @@ -60,6 +65,7 @@ movl \offset+48(%rsp),%edx movl \offset+56(%rsp),%esi movl \offset+64(%rsp),%edi + movl %eax,%eax /* zero extension */ .endm .macro CFI_STARTPROC32 simple @@ -153,7 +159,7 @@ ENTRY(ia32_sysenter_target) testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) CFI_REMEMBER_STATE jnz sysenter_tracesys - cmpl $(IA32_NR_syscalls-1),%eax + cmpq $(IA32_NR_syscalls-1),%rax ja ia32_badsys sysenter_do_call: IA32_ARG_FIXUP @@ -195,7 +201,7 @@ sysexit_from_sys_call: movl $AUDIT_ARCH_I386,%edi /* 1st arg: audit arch */ call audit_syscall_entry movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall number */ - cmpl $(IA32_NR_syscalls-1),%eax + cmpq $(IA32_NR_syscalls-1),%rax ja ia32_badsys movl %ebx,%edi /* reload 1st syscall arg */ movl RCX-ARGOFFSET(%rsp),%esi /* reload 2nd syscall arg */ @@ -248,7 +254,7 @@ sysenter_tracesys: call syscall_trace_enter LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST - cmpl $(IA32_NR_syscalls-1),%eax + cmpq $(IA32_NR_syscalls-1),%rax ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */ jmp sysenter_do_call CFI_ENDPROC @@ -314,7 +320,7 @@ ENTRY(ia32_cstar_target) testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) CFI_REMEMBER_STATE jnz cstar_tracesys - cmpl $IA32_NR_syscalls-1,%eax + cmpq $IA32_NR_syscalls-1,%rax ja ia32_badsys cstar_do_call: IA32_ARG_FIXUP 1 @@ -367,7 +373,7 @@ cstar_tracesys: LOAD_ARGS32 ARGOFFSET, 1 /* reload args from stack in case ptrace changed it */ RESTORE_REST xchgl %ebp,%r9d - cmpl $(IA32_NR_syscalls-1),%eax + cmpq $(IA32_NR_syscalls-1),%rax ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */ jmp cstar_do_call END(ia32_cstar_target) @@ -425,7 +431,7 @@ ENTRY(ia32_syscall) orl $TS_COMPAT,TI_status(%r10) testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) jnz ia32_tracesys - cmpl $(IA32_NR_syscalls-1),%eax + cmpq $(IA32_NR_syscalls-1),%rax ja ia32_badsys ia32_do_call: IA32_ARG_FIXUP @@ -444,7 +450,7 @@ ia32_tracesys: call syscall_trace_enter LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST - cmpl $(IA32_NR_syscalls-1),%eax + cmpq $(IA32_NR_syscalls-1),%rax ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */ jmp ia32_do_call END(ia32_syscall) diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h index 306160e58b48..1d9cd27c2920 100644 --- a/arch/x86/include/asm/compat.h +++ b/arch/x86/include/asm/compat.h @@ -205,7 +205,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr) return (u32)(unsigned long)uptr; } -static inline void __user *compat_alloc_user_space(long len) +static inline void __user *arch_compat_alloc_user_space(long len) { struct pt_regs *regs = task_pt_regs(current); return (void __user *)regs->sp - len; diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 781a50b29a49..c6fbb7b430d1 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -296,6 +296,7 @@ extern const char * const x86_power_flags[32]; #endif /* CONFIG_X86_64 */ +#if __GNUC__ >= 4 /* * Static testing of CPU features. Used the same as boot_cpu_has(). * These are only valid after alternatives have run, but will statically @@ -304,7 +305,7 @@ extern const char * const x86_power_flags[32]; */ static __always_inline __pure bool __static_cpu_has(u16 bit) { -#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) +#if __GNUC__ > 4 || __GNUC_MINOR__ >= 5 asm goto("1: jmp %l[t_no]\n" "2:\n" ".section .altinstructions,\"a\"\n" @@ -345,7 +346,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) #endif } -#if __GNUC__ >= 4 #define static_cpu_has(bit) \ ( \ __builtin_constant_p(boot_cpu_has(bit)) ? \ diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h index 004e6e25e913..1d5c08a1bdfd 100644 --- a/arch/x86/include/asm/hpet.h +++ b/arch/x86/include/asm/hpet.h @@ -68,7 +68,6 @@ extern unsigned long force_hpet_address; extern u8 hpet_blockid; extern int hpet_force_user; extern u8 hpet_msi_disable; -extern u8 hpet_readback_cmp; extern int is_hpet_enabled(void); extern int hpet_enable(void); extern void hpet_disable(void); diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 7b598b84c902..f744f54cb248 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -698,9 +698,11 @@ void __init uv_system_init(void) for (j = 0; j < 64; j++) { if (!test_bit(j, &present)) continue; - uv_blade_info[blade].pnode = (i * 64 + j); + pnode = (i * 64 + j); + uv_blade_info[blade].pnode = pnode; uv_blade_info[blade].nr_possible_cpus = 0; uv_blade_info[blade].nr_online_cpus = 0; + max_pnode = max(pnode, max_pnode); blade++; } } @@ -738,7 +740,6 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->scir.offset = uv_scir_offset(apicid); uv_node_to_blade[nid] = blade; uv_cpu_to_blade[cpu] = blade; - max_pnode = max(pnode, max_pnode); } /* Add blade/pnode info for nodes without cpus */ @@ -750,7 +751,6 @@ void __init uv_system_init(void) pnode = (paddr >> m_val) & pnode_mask; blade = boot_pnode_to_blade(pnode); uv_node_to_blade[nid] = blade; - max_pnode = max(pnode, max_pnode); } map_gru_high(max_pnode); diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index e5cc7e82e60d..ebdb85cf2686 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -18,7 +18,6 @@ #include <asm/apic.h> #include <asm/iommu.h> #include <asm/gart.h> -#include <asm/hpet.h> static void __init fix_hypertransport_config(int num, int slot, int func) { @@ -192,21 +191,6 @@ static void __init ati_bugs_contd(int num, int slot, int func) } #endif -/* - * Force the read back of the CMP register in hpet_next_event() - * to work around the problem that the CMP register write seems to be - * delayed. See hpet_next_event() for details. - * - * We do this on all SMBUS incarnations for now until we have more - * information about the affected chipsets. - */ -static void __init ati_hpet_bugs(int num, int slot, int func) -{ -#ifdef CONFIG_HPET_TIMER - hpet_readback_cmp = 1; -#endif -} - #define QFLAG_APPLY_ONCE 0x1 #define QFLAG_APPLIED 0x2 #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) @@ -236,8 +220,6 @@ static struct chipset early_qrk[] __initdata = { PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd }, - { PCI_VENDOR_ID_ATI, PCI_ANY_ID, - PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_hpet_bugs }, {} }; diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 351f9c0fea1f..410fdb3f1939 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -35,7 +35,6 @@ unsigned long hpet_address; u8 hpet_blockid; /* OS timer block num */ u8 hpet_msi_disable; -u8 hpet_readback_cmp; #ifdef CONFIG_PCI_MSI static unsigned long hpet_num_timers; @@ -395,23 +394,27 @@ static int hpet_next_event(unsigned long delta, * at that point and we would wait for the next hpet interrupt * forever. We found out that reading the CMP register back * forces the transfer so we can rely on the comparison with - * the counter register below. + * the counter register below. If the read back from the + * compare register does not match the value we programmed + * then we might have a real hardware problem. We can not do + * much about it here, but at least alert the user/admin with + * a prominent warning. * - * That works fine on those ATI chipsets, but on newer Intel - * chipsets (ICH9...) this triggers due to an erratum: Reading - * the comparator immediately following a write is returning - * the old value. + * An erratum on some chipsets (ICH9,..), results in + * comparator read immediately following a write returning old + * value. Workaround for this is to read this value second + * time, when first read returns old value. * - * We restrict the read back to the affected ATI chipsets (set - * by quirks) and also run it with hpet=verbose for debugging - * purposes. + * In fact the write to the comparator register is delayed up + * to two HPET cycles so the workaround we tried to restrict + * the readback to those known to be borked ATI chipsets + * failed miserably. So we give up on optimizations forever + * and penalize all HPET incarnations unconditionally. */ - if (hpet_readback_cmp || hpet_verbose) { - u32 cmp = hpet_readl(HPET_Tn_CMP(timer)); - - if (cmp != cnt) + if (unlikely((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt)) { + if (hpet_readl(HPET_Tn_CMP(timer)) != cnt) printk_once(KERN_WARNING - "hpet: compare register read back failed.\n"); + "hpet: compare register read back failed.\n"); } return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; |