diff options
Diffstat (limited to 'arch/sh/boards')
| -rw-r--r-- | arch/sh/boards/mpc1211/Makefile | 8 | ||||
| -rw-r--r-- | arch/sh/boards/mpc1211/pci.c | 295 | ||||
| -rw-r--r-- | arch/sh/boards/mpc1211/rtc.c | 136 | ||||
| -rw-r--r-- | arch/sh/boards/mpc1211/setup.c | 347 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/migor/setup.c | 11 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/r7780rp/irq-r7780mp.c | 2 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/r7780rp/irq-r7780rp.c | 2 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/r7780rp/irq-r7785rp.c | 2 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/r7780rp/setup.c | 24 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/rts7751r2d/setup.c | 7 | ||||
| -rw-r--r-- | arch/sh/boards/se/7206/setup.c | 17 | ||||
| -rw-r--r-- | arch/sh/boards/se/7722/setup.c | 6 |
12 files changed, 38 insertions, 819 deletions
diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile deleted file mode 100644 index 8cd31b5d200b..000000000000 --- a/arch/sh/boards/mpc1211/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel -# - -obj-y := setup.o rtc.o - -obj-$(CONFIG_PCI) += pci.o - diff --git a/arch/sh/boards/mpc1211/pci.c b/arch/sh/boards/mpc1211/pci.c deleted file mode 100644 index 23849f70f133..000000000000 --- a/arch/sh/boards/mpc1211/pci.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02) - * - * (c) 2002-2003 Saito.K & Jeanne - * - * Dustin McIntire (dustin@sensoria.com) - * Derived from arch/i386/kernel/pci-*.c which bore the message: - * (c) 1999--2000 Martin Mares <mj@ucw.cz> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/errno.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include <asm/machvec.h> -#include <asm/io.h> -#include <asm/mpc1211/pci.h> - -static struct resource mpcpci_io_resource = { - "MPCPCI IO", - 0x00000000, - 0xffffffff, - IORESOURCE_IO -}; - -static struct resource mpcpci_mem_resource = { - "MPCPCI mem", - 0x00000000, - 0xffffffff, - IORESOURCE_MEM -}; - -static struct pci_ops pci_direct_conf1; -struct pci_channel board_pci_channels[] = { - {&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256}, - {NULL, NULL, NULL, 0, 0}, -}; - -/* - * Direct access to PCI hardware... - */ - - -#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) - -/* - * Functions for accessing PCI configuration space with type 1 accesses - */ -static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) -{ - u32 word; - unsigned long flags; - - /* - * PCIPDR may only be accessed as 32 bit words, - * so we must do byte alignment by hand - */ - local_irq_save(flags); - writel(CONFIG_CMD(bus,devfn,where), PCIPAR); - word = readl(PCIPDR); - local_irq_restore(flags); - - switch (size) { - case 1: - switch (where & 0x3) { - case 3: - *value = (u8)(word >> 24); - break; - case 2: - *value = (u8)(word >> 16); - break; - case 1: - *value = (u8)(word >> 8); - break; - default: - *value = (u8)word; - break; - } - break; - case 2: - switch (where & 0x3) { - case 3: - *value = (u16)(word >> 24); - local_irq_save(flags); - writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR); - word = readl(PCIPDR); - local_irq_restore(flags); - *value |= ((word & 0xff) << 8); - break; - case 2: - *value = (u16)(word >> 16); - break; - case 1: - *value = (u16)(word >> 8); - break; - default: - *value = (u16)word; - break; - } - break; - case 4: - *value = word; - break; - } - PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value); - return PCIBIOS_SUCCESSFUL; -} - -/* - * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation. - * We'll allow an odd byte offset, though it should be illegal. - */ -static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) -{ - u32 word,mask = 0; - unsigned long flags; - u32 shift = (where & 3) * 8; - - if(size == 1) { - mask = ((1 << 8) - 1) << shift; // create the byte mask - } else if(size == 2){ - if(shift == 24) - return PCIBIOS_BAD_REGISTER_NUMBER; - mask = ((1 << 16) - 1) << shift; // create the word mask - } - local_irq_save(flags); - writel(CONFIG_CMD(bus,devfn,where), PCIPAR); - if(size == 4){ - writel(value, PCIPDR); - local_irq_restore(flags); - PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value); - return PCIBIOS_SUCCESSFUL; - } - word = readl(PCIPDR); - word &= ~mask; - word |= ((value << shift) & mask); - writel(word, PCIPDR); - local_irq_restore(flags); - PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word); - return PCIBIOS_SUCCESSFUL; -} - -#undef CONFIG_CMD - -static struct pci_ops pci_direct_conf1 = { - .read = pci_conf1_read, - .write = pci_conf1_write, -}; - -static void __devinit quirk_ali_ide_ports(struct pci_dev *dev) -{ - dev->resource[0].start = 0x1f0; - dev->resource[0].end = 0x1f7; - dev->resource[0].flags = IORESOURCE_IO; - dev->resource[1].start = 0x3f6; - dev->resource[1].end = 0x3f6; - dev->resource[1].flags = IORESOURCE_IO; - dev->resource[2].start = 0x170; - dev->resource[2].end = 0x177; - dev->resource[2].flags = IORESOURCE_IO; - dev->resource[3].start = 0x376; - dev->resource[3].end = 0x376; - dev->resource[3].flags = IORESOURCE_IO; - dev->resource[4].start = 0xf000; - dev->resource[4].end = 0xf00f; - dev->resource[4].flags = IORESOURCE_IO; -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports); - -char * __devinit pcibios_setup(char *str) -{ - return str; -} - -/* - * Called after each bus is probed, but before its children - * are examined. - */ - -void __devinit pcibios_fixup_bus(struct pci_bus *b) -{ - pci_read_bridge_bases(b); -} - -/* - * IRQ functions - */ -static inline u8 bridge_swizzle(u8 pin, u8 slot) -{ - return (((pin-1) + slot) % 4) + 1; -} - -static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot) -{ - return (((pin-1) - slot) & 3) + 1; -} - -static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp) -{ - unsigned long flags; - u8 pin = *pinp; - u32 word; - - for ( ; dev->bus->self; dev = dev->bus->self) { - if (!pin) - continue; - - if (dev->bus->number == 1) { - local_irq_save(flags); - writel(0x80000000 | 0x2c, PCIPAR); - word = readl(PCIPDR); - local_irq_restore(flags); - word >>= 16; - - if (word == 0x0001) - pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn)); - else - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); - } else - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); - } - - *pinp = pin; - - return PCI_SLOT(dev->devfn); -} - -static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq = -1; - - /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ - if (dev->bus->number == 0) { - switch (slot) { - case 13: irq = 9; break; /* USB */ - case 22: irq = 10; break; /* LAN */ - default: irq = 0; break; - } - } else { - switch (pin) { - case 0: irq = 0; break; - case 1: irq = 7; break; - case 2: irq = 9; break; - case 3: irq = 10; break; - case 4: irq = 11; break; - } - } - - if( irq < 0 ) { - PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev)); - return irq; - } - - PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq); - - return irq; -} - -void __init pcibios_fixup_irqs(void) -{ - pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq); -} - -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - resource_size_t start = res->start; - - if (res->flags & IORESOURCE_IO) { - if (start >= 0x10000UL) { - if ((start & 0xffffUL) < 0x4000UL) { - start = (start & 0xffff0000UL) + 0x4000UL; - } else if ((start & 0xffffUL) >= 0xf000UL) { - start = (start & 0xffff0000UL) + 0x10000UL; - } - res->start = start; - } else { - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } - } -} - diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c deleted file mode 100644 index 03b123a4bba4..000000000000 --- a/arch/sh/boards/mpc1211/rtc.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * linux/arch/sh/kernel/rtc-mpc1211.c -- MPC-1211 on-chip RTC support - * - * Copyright (C) 2002 Saito.K & Jeanne - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/time.h> -#include <linux/bcd.h> -#include <linux/mc146818rtc.h> - -unsigned long get_cmos_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - - spin_lock(&rtc_lock); - - do { - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); - } while (sec != CMOS_READ(RTC_SECONDS)); - - if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - } - - spin_unlock(&rtc_lock); - - year += 1900; - if (year < 1970) - year += 100; - - return mktime(year, mon, day, hour, min, sec); -} - -void mpc1211_rtc_gettimeofday(struct timeval *tv) -{ - - tv->tv_sec = get_cmos_time(); - tv->tv_usec = 0; -} - -/* arc/i386/kernel/time.c */ -/* - * In order to set the CMOS clock precisely, set_rtc_mmss has to be - * called 500 ms after the second nowtime has started, because when - * nowtime is written into the registers of the CMOS clock, it will - * jump to the next second precisely 500 ms later. Check the Motorola - * MC146818A or Dallas DS12887 data sheet for details. - * - * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you'll only notice that after reboot! - */ -static int set_rtc_mmss(unsigned long nowtime) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned char save_control, save_freq_select; - - /* gets recalled with irq locally disabled */ - spin_lock(&rtc_lock); - save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ - CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); - - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ - CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - - cmos_minutes = CMOS_READ(RTC_MINUTES); - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - BCD_TO_BIN(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BIN_TO_BCD(real_seconds); - BIN_TO_BCD(real_minutes); - } - CMOS_WRITE(real_seconds,RTC_SECONDS); - CMOS_WRITE(real_minutes,RTC_MINUTES); - } else { - printk(KERN_WARNING - "set_rtc_mmss: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - /* The following flags have to be released exactly in this order, - * otherwise the DS12887 (popular MC146818A clone with integrated - * battery and quartz) will not reset the oscillator and will not - * update precisely 500 ms later. You won't find this mentioned in - * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn - */ - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - spin_unlock(&rtc_lock); - - return retval; -} - -int mpc1211_rtc_settimeofday(const struct timeval *tv) -{ - unsigned long nowtime = tv->tv_sec; - - return set_rtc_mmss(nowtime); -} - -void mpc1211_time_init(void) -{ - rtc_sh_get_time = mpc1211_rtc_gettimeofday; - rtc_sh_set_time = mpc1211_rtc_settimeofday; -} - diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c deleted file mode 100644 index fede36361dc7..000000000000 --- a/arch/sh/boards/mpc1211/setup.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * linux/arch/sh/boards/mpc1211/setup.c - * - * Copyright (C) 2002 Saito.K & Jeanne, Fujii.Y - * - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/hdreg.h> -#include <linux/ide.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <asm/io.h> -#include <asm/machvec.h> -#include <asm/mpc1211/mpc1211.h> -#include <asm/mpc1211/pci.h> -#include <asm/mpc1211/m1543c.h> - -/* ALI15X3 SMBus address offsets */ -#define SMBHSTSTS (0 + 0x3100) -#define SMBHSTCNT (1 + 0x3100) -#define SMBHSTSTART (2 + 0x3100) -#define SMBHSTCMD (7 + 0x3100) -#define SMBHSTADD (3 + 0x3100) -#define SMBHSTDAT0 (4 + 0x3100) -#define SMBHSTDAT1 (5 + 0x3100) -#define SMBBLKDAT (6 + 0x3100) - -/* Other settings */ -#define MAX_TIMEOUT 500 /* times 1/100 sec */ - -/* ALI15X3 command constants */ -#define ALI15X3_ABORT 0x04 -#define ALI15X3_T_OUT 0x08 -#define ALI15X3_QUICK 0x00 -#define ALI15X3_BYTE 0x10 -#define ALI15X3_BYTE_DATA 0x20 -#define ALI15X3_WORD_DATA 0x30 -#define ALI15X3_BLOCK_DATA 0x40 -#define ALI15X3_BLOCK_CLR 0x80 - -/* ALI15X3 status register bits */ -#define ALI15X3_STS_IDLE 0x04 -#define ALI15X3_STS_BUSY 0x08 -#define ALI15X3_STS_DONE 0x10 -#define ALI15X3_STS_DEV 0x20 /* device error */ -#define ALI15X3_STS_COLL 0x40 /* collision or no response */ -#define ALI15X3_STS_TERM 0x80 /* terminated by abort */ -#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */ - -static void __init pci_write_config(unsigned long busNo, - unsigned long devNo, - unsigned long fncNo, - unsigned long cnfAdd, - unsigned long cnfData) -{ - ctrl_outl((0x80000000 - + ((busNo & 0xff) << 16) - + ((devNo & 0x1f) << 11) - + ((fncNo & 0x07) << 8) - + (cnfAdd & 0xfc)), PCIPAR); - - ctrl_outl(cnfData, PCIPDR); -} - -/* - Initialize IRQ setting -*/ - -static unsigned char m_irq_mask = 0xfb; -static unsigned char s_irq_mask = 0xff; - -static void disable_mpc1211_irq(unsigned int irq) -{ - if( irq < 8) { - m_irq_mask |= (1 << irq); - outb(m_irq_mask,I8259_M_MR); - } else { - s_irq_mask |= (1 << (irq - 8)); - outb(s_irq_mask,I8259_S_MR); - } - -} - -static void enable_mpc1211_irq(unsigned int irq) -{ - if( irq < 8) { - m_irq_mask &= ~(1 << irq); - outb(m_irq_mask,I8259_M_MR); - } else { - s_irq_mask &= ~(1 << (irq - 8)); - outb(s_irq_mask,I8259_S_MR); - } -} - -static inline int mpc1211_irq_real(unsigned int irq) -{ - int value; - int irqmask; - - if ( irq < 8) { - irqmask = 1<<irq; - outb(0x0b,I8259_M_CR); /* ISR register */ - value = inb(I8259_M_CR) & irqmask; - outb(0x0a,I8259_M_CR); /* back ro the IPR reg */ - return value; - } - irqmask = 1<<(irq - 8); - outb(0x0b,I8259_S_CR); /* ISR register */ - value = inb(I8259_S_CR) & irqmask; - outb(0x0a,I8259_S_CR); /* back ro the IPR reg */ - return value; -} - -static void mask_and_ack_mpc1211(unsigned int irq) -{ - if(irq < 8) { - if(m_irq_mask & (1<<irq)){ - if(!mpc1211_irq_real(irq)){ - atomic_inc(&irq_err_count) - printk("spurious 8259A interrupt: IRQ %x\n",irq); - } - } else { - m_irq_mask |= (1<<irq); - } - inb(I8259_M_MR); /* DUMMY */ - outb(m_irq_mask,I8259_M_MR); /* disable */ - outb(0x60+irq,I8259_M_CR); /* EOI */ - - } else { - if(s_irq_mask & (1<<(irq - 8))){ - if(!mpc1211_irq_real(irq)){ - atomic_inc(&irq_err_count); - printk("spurious 8259A interrupt: IRQ %x\n",irq); - } - } else { - s_irq_mask |= (1<<(irq - 8)); - } - inb(I8259_S_MR); /* DUMMY */ - outb(s_irq_mask,I8259_S_MR); /* disable */ - outb(0x60+(irq-8),I8259_S_CR); /* EOI */ - outb(0x60+2,I8259_M_CR); - } -} - -static void end_mpc1211_irq(unsigned int irq) -{ - enable_mpc1211_irq(irq); -} - -static unsigned int startup_mpc1211_irq(unsigned int irq) -{ - enable_mpc1211_irq(irq); - return 0; -} - -static void shutdown_mpc1211_irq(unsigned int irq) -{ - disable_mpc1211_irq(irq); -} - -static struct hw_interrupt_type mpc1211_irq_type = { - .typename = "MPC1211-IRQ", - .startup = startup_mpc1211_irq, - .shutdown = shutdown_mpc1211_irq, - .enable = enable_mpc1211_irq, - .disable = disable_mpc1211_irq, - .ack = mask_and_ack_mpc1211, - .end = end_mpc1211_irq -}; - -static void make_mpc1211_irq(unsigned int irq) -{ - irq_desc[irq].chip = &mpc1211_irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - disable_mpc1211_irq(irq); -} - -int mpc1211_irq_demux(int irq) -{ - unsigned int poll; - - if( irq == 2 ) { - outb(0x0c,I8259_M_CR); - poll = inb(I8259_M_CR); - if(poll & 0x80) { - irq = (poll & 0x07); - } - if( irq == 2) { - outb(0x0c,I8259_S_CR); - poll = inb(I8259_S_CR); - irq = (poll & 0x07) + 8; - } - } - return irq; -} - -static void __init init_mpc1211_IRQ(void) -{ - int i; - /* - * Super I/O (Just mimic PC): - * 1: keyboard - * 3: serial 1 - * 4: serial 0 - * 5: printer - * 6: floppy - * 8: rtc - * 10: lan - * 12: mouse - * 14: ide0 - * 15: ide1 - */ - - pci_write_config(0,0,0,0x54, 0xb0b0002d); - outb(0x11, I8259_M_CR); /* mater icw1 edge trigger */ - outb(0x11, I8259_S_CR); /* slave icw1 edge trigger */ - outb(0x20, I8259_M_MR); /* m icw2 base vec 0x08 */ - outb(0x28, I8259_S_MR); /* s icw2 base vec 0x70 */ - outb(0x04, I8259_M_MR); /* m icw3 slave irq2 */ - outb(0x02, I8259_S_MR); /* s icw3 slave id */ - outb(0x01, I8259_M_MR); /* m icw4 non buf normal eoi*/ - outb(0x01, I8259_S_MR); /* s icw4 non buf normal eo1*/ - outb(0xfb, I8259_M_MR); /* disable irq0--irq7 */ - outb(0xff, I8259_S_MR); /* disable irq8--irq15 */ - - for ( i=0; i < 16; i++) { - if(i != 2) { - make_mpc1211_irq(i); - } - } -} - -static void delay1000(void) -{ - int i; - - for (i=0; i<1000; i++) - ctrl_delay(); -} - -static int put_smb_blk(unsigned char *p, int address, int command, int no) -{ - int temp; - int timeout; - int i; - - outb(0xff, SMBHSTSTS); - temp = inb(SMBHSTSTS); - for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); timeout++) { - delay1000(); - temp = inb(SMBHSTSTS); - } - if (timeout >= MAX_TIMEOUT){ - return -1; - } - - outb(((address & 0x7f) << 1), SMBHSTADD); - outb(0xc0, SMBHSTCNT); - outb(command & 0xff, SMBHSTCMD); - outb(no & 0x1f, SMBHSTDAT0); - - for(i = 1; i <= no; i++) { - outb(*p++, SMBBLKDAT); - } - outb(0xff, SMBHSTSTART); - - temp = inb(SMBHSTSTS); - for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)); timeout++) { - delay1000(); - temp = inb(SMBHSTSTS); - } - if (timeout >= MAX_TIMEOUT) { - return -2; - } - if ( temp & ALI15X3_STS_ERR ){ - return -3; - } - return 0; -} - -static struct resource heartbeat_resources[] = { - [0] = { - .start = 0xa2000000, - .end = 0xa2000000, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device heartbeat_device = { - .name = "heartbeat", - .id = -1, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, -}; - -static struct platform_device *mpc1211_devices[] __initdata = { - &heartbeat_device, -}; - -static int __init mpc1211_devices_setup(void) -{ - return platform_add_devices(mpc1211_devices, - ARRAY_SIZE(mpc1211_devices)); -} -__initcall(mpc1211_devices_setup); - -/* arch/sh/boards/mpc1211/rtc.c */ -void mpc1211_time_init(void); - -static void __init mpc1211_setup(char **cmdline_p) -{ - unsigned char spd_buf[128]; - - __set_io_port_base(PA_PCI_IO); - - pci_write_config(0,0,0,0x54, 0xb0b00000); - - do { - outb(ALI15X3_ABORT, SMBHSTCNT); - spd_buf[0] = 0x0c; - spd_buf[1] = 0x43; - spd_buf[2] = 0x7f; - spd_buf[3] = 0x03; - spd_buf[4] = 0x00; - spd_buf[5] = 0x03; - spd_buf[6] = 0x00; - } while (put_smb_blk(spd_buf, 0x69, 0, 7) < 0); - - board_time_init = mpc1211_time_init; - - return 0; -} - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_mpc1211 __initmv = { - .mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)", - .mv_setup = mpc1211_setup, - .mv_nr_irqs = 48, - .mv_irq_demux = mpc1211_irq_demux, - .mv_init_irq = init_mpc1211_IRQ, -}; diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index e7c150d49702..01af44245b57 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -14,6 +14,7 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> +#include <linux/smc91x.h> #include <asm/machvec.h> #include <asm/io.h> #include <asm/sh_keysc.h> @@ -27,6 +28,11 @@ * 0x18000000 8GB 8 NAND Flash (K9K8G08U0A) */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, + .irq_flags = IRQF_TRIGGER_HIGH, +}; + static struct resource smc91x_eth_resources[] = { [0] = { .name = "SMC91C111" , @@ -36,7 +42,7 @@ static struct resource smc91x_eth_resources[] = { }, [1] = { .start = 32, /* IRQ0 */ - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, + .flags = IORESOURCE_IRQ, }, }; @@ -44,6 +50,9 @@ static struct platform_device smc91x_eth_device = { .name = "smc91x", .num_resources = ARRAY_SIZE(smc91x_eth_resources), .resource = smc91x_eth_resources, + .dev = { + .platform_data = &smc91x_info, + }, }; static struct sh_keysc_info sh_keysc_info = { diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c index 68f0ad1b637d..ae1cfcb29700 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c @@ -62,7 +62,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = { static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors, NULL, mask_registers, NULL, NULL); -unsigned char * __init highlander_init_irq_r7780mp(void) +unsigned char * __init highlander_plat_irq_setup(void) { if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) { printk(KERN_INFO "Using r7780mp interrupt controller.\n"); diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c index bd34048ed0e1..9d3921fe27c0 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c @@ -55,7 +55,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = { static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors, NULL, mask_registers, NULL, NULL); -unsigned char * __init highlander_init_irq_r7780rp(void) +unsigned char * __init highlander_plat_irq_setup(void) { if (ctrl_inw(0xa5000600)) { printk(KERN_INFO "Using r7780rp interrupt controller.\n"); diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c index bf7ec107fbc6..896c045aa39d 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c @@ -64,7 +64,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = { static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, NULL, mask_registers, NULL, NULL); -unsigned char * __init highlander_init_irq_r7785rp(void) +unsigned char * __init highlander_plat_irq_setup(void) { if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000) return NULL; diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index ac0a96522e45..bc79afb6fc4c 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -316,7 +316,7 @@ static void __init highlander_setup(char **cmdline_p) static unsigned char irl2irq[HL_NR_IRL]; -int highlander_irq_demux(int irq) +static int highlander_irq_demux(int irq) { if (irq >= HL_NR_IRL || !irl2irq[irq]) return irq; @@ -324,27 +324,9 @@ int highlander_irq_demux(int irq) return irl2irq[irq]; } -void __init highlander_init_irq(void) +static void __init highlander_init_irq(void) { - unsigned char *ucp = NULL; - - do { -#ifdef CONFIG_SH_R7780MP - ucp = highlander_init_irq_r7780mp(); - if (ucp) - break; -#endif -#ifdef CONFIG_SH_R7785RP - ucp = highlander_init_irq_r7785rp(); - if (ucp) - break; -#endif -#ifdef CONFIG_SH_R7780RP - ucp = highlander_init_irq_r7780rp(); - if (ucp) - break; -#endif - } while (0); + unsigned char *ucp = highlander_plat_irq_setup(); if (ucp) { plat_irq_setup_pins(IRQ_MODE_IRL3210); diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index f21ee49ef3a5..452d0d6459a4 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -109,7 +109,6 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; -#ifdef CONFIG_MFD_SM501 static struct plat_serial8250_port uart_platform_data[] = { { .membase = (void __iomem *)0xb3e30000, @@ -208,13 +207,9 @@ static struct platform_device sm501_device = { .resource = sm501_resources, }; -#endif /* CONFIG_MFD_SM501 */ - static struct platform_device *rts7751r2d_devices[] __initdata = { -#ifdef CONFIG_MFD_SM501 &uart_device, &sm501_device, -#endif &heartbeat_device, &spi_sh_sci_device, }; @@ -234,7 +229,9 @@ static int __init rts7751r2d_devices_setup(void) { if (register_trapped_io(&cf_trapped_io) == 0) platform_device_register(&cf_ide_device); + spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); + return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c index 5b3ee089d91d..4fe84cc08406 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/se/7206/setup.c @@ -3,12 +3,13 @@ * linux/arch/sh/boards/se/7206/setup.c * * Copyright (C) 2006 Yoshinori Sato - * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 - 2008 Paul Mundt * * Hitachi 7206 SolutionEngine Support. */ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/smc91x.h> #include <asm/se7206.h> #include <asm/io.h> #include <asm/machvec.h> @@ -16,8 +17,9 @@ static struct resource smc91x_resources[] = { [0] = { - .start = 0x300, - .end = 0x300 + 0x020 - 1, + .name = "smc91x-regs", + .start = PA_SMSC + 0x300, + .end = PA_SMSC + 0x300 + 0x020 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -27,9 +29,18 @@ static struct resource smc91x_resources[] = { }, }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index 33f6ee71f848..ede3957fc14a 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <asm/machvec.h> #include <asm/se7722.h> #include <asm/io.h> @@ -44,6 +45,10 @@ static struct platform_device heartbeat_device = { }; /* SMC91x */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, +}; + static struct resource smc91x_eth_resources[] = { [0] = { .name = "smc91x-regs" , @@ -64,6 +69,7 @@ static struct platform_device smc91x_eth_device = { .dev = { .dma_mask = NULL, /* don't use dma */ .coherent_dma_mask = 0xffffffff, + .platform_data = &smc91x_info, }, .num_resources = ARRAY_SIZE(smc91x_eth_resources), .resource = smc91x_eth_resources, |