1 files changed, 0 insertions, 125 deletions
diff --git a/arch/riscv/boot/dts/kendryte/k210.dtsi b/arch/riscv/boot/dts/kendryte/k210.dtsi
deleted file mode 100644
index d2d0ff645632..000000000000
--- a/arch/riscv/boot/dts/kendryte/k210.dtsi
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com>
- * Copyright (C) 2020 Western Digital Corporation or its affiliates.
- */
-#include <dt-bindings/clock/k210-clk.h>
-
-/ {
-	/*
-	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
-	 * wide, and the upper half of all addresses is ignored.
-	 */
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "kendryte,k210";
-
-	aliases {
-		serial0 = &uarths0;
-	};
-
-	/*
-	 * The K210 has an sv39 MMU following the priviledge specification v1.9.
-	 * Since this is a non-ratified draft specification, the kernel does not
-	 * support it and the K210 support enabled only for the !MMU case.
-	 * Be consistent with this by setting the CPUs MMU type to "none".
-	 */
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		timebase-frequency = <7800000>;
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			reg = <0>;
-			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
-			riscv,isa = "rv64imafdc";
-			mmu-type = "none";
-			i-cache-size = <0x8000>;
-			i-cache-block-size = <64>;
-			d-cache-size = <0x8000>;
-			d-cache-block-size = <64>;
-			clocks = <&sysctl K210_CLK_CPU>;
-			clock-frequency = <390000000>;
-			cpu0_intc: interrupt-controller {
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				compatible = "riscv,cpu-intc";
-			};
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			reg = <1>;
-			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
-			riscv,isa = "rv64imafdc";
-			mmu-type = "none";
-			i-cache-size = <0x8000>;
-			i-cache-block-size = <64>;
-			d-cache-size = <0x8000>;
-			d-cache-block-size = <64>;
-			clocks = <&sysctl K210_CLK_CPU>;
-			clock-frequency = <390000000>;
-			cpu1_intc: interrupt-controller {
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				compatible = "riscv,cpu-intc";
-			};
-		};
-	};
-
-	sram: memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x400000>,
-		      <0x80400000 0x200000>,
-		      <0x80600000 0x200000>;
-		reg-names = "sram0", "sram1", "aisram";
-	};
-
-	clocks {
-		in0: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "kendryte,k210-soc", "simple-bus";
-		ranges;
-		interrupt-parent = <&plic0>;
-
-		sysctl: sysctl@50440000 {
-			compatible = "kendryte,k210-sysctl", "simple-mfd";
-			reg = <0x50440000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		clint0: clint@2000000 {
-			#interrupt-cells = <1>;
-			compatible = "riscv,clint0";
-			reg = <0x2000000 0xC000>;
-			interrupts-extended =  <&cpu0_intc 3 &cpu0_intc 7
-						&cpu1_intc 3 &cpu1_intc 7>;
-			clocks = <&sysctl K210_CLK_ACLK>;
-		};
-
-		plic0: interrupt-controller@c000000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "kendryte,k210-plic0", "riscv,plic0";
-			reg = <0xC000000 0x4000000>;
-			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>,
-					      <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>;
-			riscv,ndev = <65>;
-			riscv,max-priority = <7>;
-		};
-
-		uarths0: serial@38000000 {
-			compatible = "kendryte,k210-uarths", "sifive,uart0";
-			reg = <0x38000000 0x1000>;
-			interrupts = <33>;
-			clocks = <&sysctl K210_CLK_CPU>;
-		};
-	};
-};