diff options
Diffstat (limited to 'arch/mips')
| -rw-r--r-- | arch/mips/Kconfig | 2 | ||||
| -rw-r--r-- | arch/mips/configs/loongson1b_defconfig (renamed from arch/mips/configs/ls1b_defconfig) | 35 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-loongson32/cpufreq.h | 1 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-loongson32/dma.h | 25 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-loongson32/irq.h | 1 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-loongson32/loongson1.h | 4 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-loongson32/nand.h | 30 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-loongson32/platform.h | 14 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-loongson32/regs-clk.h | 24 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-loongson32/regs-mux.h | 84 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-loongson32/regs-pwm.h | 12 | ||||
| -rw-r--r-- | arch/mips/loongson32/common/platform.c | 105 | ||||
| -rw-r--r-- | arch/mips/loongson32/common/reset.c | 13 | ||||
| -rw-r--r-- | arch/mips/loongson32/common/time.c | 27 | ||||
| -rw-r--r-- | arch/mips/loongson32/ls1b/board.c | 67 |
15 files changed, 340 insertions, 104 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 79a1c6991c08..fbd63ff8eba4 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1387,6 +1387,8 @@ config CPU_LOONGSON1B bool "Loongson 1B" depends on SYS_HAS_CPU_LOONGSON1B select CPU_LOONGSON1 + select ARCH_WANT_OPTIONAL_GPIOLIB + select LEDS_GPIO_REGISTER help The Loongson 1B is a 32-bit SoC, which implements the MIPS32 release 2 instruction set. diff --git a/arch/mips/configs/ls1b_defconfig b/arch/mips/configs/loongson1b_defconfig index 1b2cc1fb26a1..c442f27685f4 100644 --- a/arch/mips/configs/ls1b_defconfig +++ b/arch/mips/configs/loongson1b_defconfig @@ -1,19 +1,17 @@ CONFIG_MACH_LOONGSON32=y CONFIG_PREEMPT=y # CONFIG_SECCOMP is not set -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_XZ=y CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_NAMESPACES=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EXPERT=y CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set @@ -41,6 +39,12 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_LOONGSON1=y +CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_SCSI=m # CONFIG_SCSI_PROC_FS is not set @@ -48,7 +52,6 @@ CONFIG_BLK_DEV_SD=m # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set @@ -56,7 +59,6 @@ CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SMSC is not set CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_DA=y # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y @@ -69,18 +71,25 @@ CONFIG_LEGACY_PTY_COUNT=8 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_LOONGSON1=y # CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set -CONFIG_USB_HID=m CONFIG_HID_GENERIC=m +CONFIG_USB_HID=m CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_PLATFORM=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=m CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_PL2303=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_LOONGSON1=y # CONFIG_IOMMU_SUPPORT is not set @@ -96,15 +105,21 @@ CONFIG_VFAT_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_ATIME_SUPPORT=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_ISO8859_1=m +CONFIG_DYNAMIC_DEBUG=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set # CONFIG_EARLY_PRINTK is not set +# CONFIG_CRYPTO_ECHAINIV is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/mips/include/asm/mach-loongson32/cpufreq.h b/arch/mips/include/asm/mach-loongson32/cpufreq.h index 6843fa1a608d..2f1ecb081223 100644 --- a/arch/mips/include/asm/mach-loongson32/cpufreq.h +++ b/arch/mips/include/asm/mach-loongson32/cpufreq.h @@ -9,7 +9,6 @@ * option) any later version. */ - #ifndef __ASM_MACH_LOONGSON32_CPUFREQ_H #define __ASM_MACH_LOONGSON32_CPUFREQ_H diff --git a/arch/mips/include/asm/mach-loongson32/dma.h b/arch/mips/include/asm/mach-loongson32/dma.h new file mode 100644 index 000000000000..ad1dec743ccc --- /dev/null +++ b/arch/mips/include/asm/mach-loongson32/dma.h @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2015 Zhang, Keguang <keguang.zhang@gmail.com> + * + * Loongson 1 NAND platform support. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_MACH_LOONGSON32_DMA_H +#define __ASM_MACH_LOONGSON32_DMA_H + +#define LS1X_DMA_CHANNEL0 0 +#define LS1X_DMA_CHANNEL1 1 +#define LS1X_DMA_CHANNEL2 2 + +struct plat_ls1x_dma { + int nr_channels; +}; + +extern struct plat_ls1x_dma ls1b_dma_pdata; + +#endif /* __ASM_MACH_LOONGSON32_DMA_H */ diff --git a/arch/mips/include/asm/mach-loongson32/irq.h b/arch/mips/include/asm/mach-loongson32/irq.h index 0d35b994e8d2..c1c744197de4 100644 --- a/arch/mips/include/asm/mach-loongson32/irq.h +++ b/arch/mips/include/asm/mach-loongson32/irq.h @@ -9,7 +9,6 @@ * option) any later version. */ - #ifndef __ASM_MACH_LOONGSON32_IRQ_H #define __ASM_MACH_LOONGSON32_IRQ_H diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h index 12aa129aad80..978f6df8970a 100644 --- a/arch/mips/include/asm/mach-loongson32/loongson1.h +++ b/arch/mips/include/asm/mach-loongson32/loongson1.h @@ -9,7 +9,6 @@ * option) any later version. */ - #ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H #define __ASM_MACH_LOONGSON32_LOONGSON1_H @@ -18,6 +17,9 @@ /* Loongson 1 Register Bases */ #define LS1X_MUX_BASE 0x1fd00420 #define LS1X_INTC_BASE 0x1fd01040 +#define LS1X_GPIO0_BASE 0x1fd010c0 +#define LS1X_GPIO1_BASE 0x1fd010c4 +#define LS1X_DMAC_BASE 0x1fd01160 #define LS1X_EHCI_BASE 0x1fe00000 #define LS1X_OHCI_BASE 0x1fe08000 #define LS1X_GMAC0_BASE 0x1fe10000 diff --git a/arch/mips/include/asm/mach-loongson32/nand.h b/arch/mips/include/asm/mach-loongson32/nand.h new file mode 100644 index 000000000000..e274912e9de1 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson32/nand.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2015 Zhang, Keguang <keguang.zhang@gmail.com> + * + * Loongson 1 NAND platform support. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_MACH_LOONGSON32_NAND_H +#define __ASM_MACH_LOONGSON32_NAND_H + +#include <linux/dmaengine.h> +#include <linux/mtd/partitions.h> + +struct plat_ls1x_nand { + struct mtd_partition *parts; + unsigned int nr_parts; + + int hold_cycle; + int wait_cycle; +}; + +extern struct plat_ls1x_nand ls1b_nand_pdata; + +bool ls1x_dma_filter_fn(struct dma_chan *chan, void *param); + +#endif /* __ASM_MACH_LOONGSON32_NAND_H */ diff --git a/arch/mips/include/asm/mach-loongson32/platform.h b/arch/mips/include/asm/mach-loongson32/platform.h index c32f03f3f72c..672531aa9bef 100644 --- a/arch/mips/include/asm/mach-loongson32/platform.h +++ b/arch/mips/include/asm/mach-loongson32/platform.h @@ -7,20 +7,28 @@ * option) any later version. */ - #ifndef __ASM_MACH_LOONGSON32_PLATFORM_H #define __ASM_MACH_LOONGSON32_PLATFORM_H #include <linux/platform_device.h> +#include <dma.h> +#include <nand.h> + extern struct platform_device ls1x_uart_pdev; extern struct platform_device ls1x_cpufreq_pdev; +extern struct platform_device ls1x_dma_pdev; extern struct platform_device ls1x_eth0_pdev; extern struct platform_device ls1x_eth1_pdev; extern struct platform_device ls1x_ehci_pdev; +extern struct platform_device ls1x_gpio0_pdev; +extern struct platform_device ls1x_gpio1_pdev; +extern struct platform_device ls1x_nand_pdev; extern struct platform_device ls1x_rtc_pdev; -extern void __init ls1x_clk_init(void); -extern void __init ls1x_serial_setup(struct platform_device *pdev); +void __init ls1x_clk_init(void); +void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata); +void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata); +void __init ls1x_serial_set_uartclk(struct platform_device *pdev); #endif /* __ASM_MACH_LOONGSON32_PLATFORM_H */ diff --git a/arch/mips/include/asm/mach-loongson32/regs-clk.h b/arch/mips/include/asm/mach-loongson32/regs-clk.h index 1f5a715ac841..4d56fc38f0c4 100644 --- a/arch/mips/include/asm/mach-loongson32/regs-clk.h +++ b/arch/mips/include/asm/mach-loongson32/regs-clk.h @@ -19,18 +19,18 @@ #define LS1X_CLK_PLL_DIV LS1X_CLK_REG(0x4) /* Clock PLL Divisor Register Bits */ -#define DIV_DC_EN (0x1 << 31) -#define DIV_DC_RST (0x1 << 30) -#define DIV_CPU_EN (0x1 << 25) -#define DIV_CPU_RST (0x1 << 24) -#define DIV_DDR_EN (0x1 << 19) -#define DIV_DDR_RST (0x1 << 18) -#define RST_DC_EN (0x1 << 5) -#define RST_DC (0x1 << 4) -#define RST_DDR_EN (0x1 << 3) -#define RST_DDR (0x1 << 2) -#define RST_CPU_EN (0x1 << 1) -#define RST_CPU 0x1 +#define DIV_DC_EN BIT(31) +#define DIV_DC_RST BIT(30) +#define DIV_CPU_EN BIT(25) +#define DIV_CPU_RST BIT(24) +#define DIV_DDR_EN BIT(19) +#define DIV_DDR_RST BIT(18) +#define RST_DC_EN BIT(5) +#define RST_DC BIT(4) +#define RST_DDR_EN BIT(3) +#define RST_DDR BIT(2) +#define RST_CPU_EN BIT(1) +#define RST_CPU BIT(0) #define DIV_DC_SHIFT 26 #define DIV_CPU_SHIFT 20 diff --git a/arch/mips/include/asm/mach-loongson32/regs-mux.h b/arch/mips/include/asm/mach-loongson32/regs-mux.h index 8302d92f2da2..7c394f93cb9e 100644 --- a/arch/mips/include/asm/mach-loongson32/regs-mux.h +++ b/arch/mips/include/asm/mach-loongson32/regs-mux.h @@ -19,49 +19,49 @@ #define LS1X_MUX_CTRL1 LS1X_MUX_REG(0x4) /* MUX CTRL0 Register Bits */ -#define UART0_USE_PWM23 (0x1 << 28) -#define UART0_USE_PWM01 (0x1 << 27) -#define UART1_USE_LCD0_5_6_11 (0x1 << 26) -#define I2C2_USE_CAN1 (0x1 << 25) -#define I2C1_USE_CAN0 (0x1 << 24) -#define NAND3_USE_UART5 (0x1 << 23) -#define NAND3_USE_UART4 (0x1 << 22) -#define NAND3_USE_UART1_DAT (0x1 << 21) -#define NAND3_USE_UART1_CTS (0x1 << 20) -#define NAND3_USE_PWM23 (0x1 << 19) -#define NAND3_USE_PWM01 (0x1 << 18) -#define NAND2_USE_UART5 (0x1 << 17) -#define NAND2_USE_UART4 (0x1 << 16) -#define NAND2_USE_UART1_DAT (0x1 << 15) -#define NAND2_USE_UART1_CTS (0x1 << 14) -#define NAND2_USE_PWM23 (0x1 << 13) -#define NAND2_USE_PWM01 (0x1 << 12) -#define NAND1_USE_UART5 (0x1 << 11) -#define NAND1_USE_UART4 (0x1 << 10) -#define NAND1_USE_UART1_DAT (0x1 << 9) -#define NAND1_USE_UART1_CTS (0x1 << 8) -#define NAND1_USE_PWM23 (0x1 << 7) -#define NAND1_USE_PWM01 (0x1 << 6) -#define GMAC1_USE_UART1 (0x1 << 4) -#define GMAC1_USE_UART0 (0x1 << 3) -#define LCD_USE_UART0_DAT (0x1 << 2) -#define LCD_USE_UART15 (0x1 << 1) -#define LCD_USE_UART0 0x1 +#define UART0_USE_PWM23 BIT(28) +#define UART0_USE_PWM01 BIT(27) +#define UART1_USE_LCD0_5_6_11 BIT(26) +#define I2C2_USE_CAN1 BIT(25) +#define I2C1_USE_CAN0 BIT(24) +#define NAND3_USE_UART5 BIT(23) +#define NAND3_USE_UART4 BIT(22) +#define NAND3_USE_UART1_DAT BIT(21) +#define NAND3_USE_UART1_CTS BIT(20) +#define NAND3_USE_PWM23 BIT(19) +#define NAND3_USE_PWM01 BIT(18) +#define NAND2_USE_UART5 BIT(17) +#define NAND2_USE_UART4 BIT(16) +#define NAND2_USE_UART1_DAT BIT(15) +#define NAND2_USE_UART1_CTS BIT(14) +#define NAND2_USE_PWM23 BIT(13) +#define NAND2_USE_PWM01 BIT(12) +#define NAND1_USE_UART5 BIT(11) +#define NAND1_USE_UART4 BIT(10) +#define NAND1_USE_UART1_DAT BIT(9) +#define NAND1_USE_UART1_CTS BIT(8) +#define NAND1_USE_PWM23 BIT(7) +#define NAND1_USE_PWM01 BIT(6) +#define GMAC1_USE_UART1 BIT(4) +#define GMAC1_USE_UART0 BIT(3) +#define LCD_USE_UART0_DAT BIT(2) +#define LCD_USE_UART15 BIT(1) +#define LCD_USE_UART0 BIT(0) /* MUX CTRL1 Register Bits */ -#define USB_RESET (0x1 << 31) -#define SPI1_CS_USE_PWM01 (0x1 << 24) -#define SPI1_USE_CAN (0x1 << 23) -#define DISABLE_DDR_CONFSPACE (0x1 << 20) -#define DDR32TO16EN (0x1 << 16) -#define GMAC1_SHUT (0x1 << 13) -#define GMAC0_SHUT (0x1 << 12) -#define USB_SHUT (0x1 << 11) -#define UART1_3_USE_CAN1 (0x1 << 5) -#define UART1_2_USE_CAN0 (0x1 << 4) -#define GMAC1_USE_TXCLK (0x1 << 3) -#define GMAC0_USE_TXCLK (0x1 << 2) -#define GMAC1_USE_PWM23 (0x1 << 1) -#define GMAC0_USE_PWM01 0x1 +#define USB_RESET BIT(31) +#define SPI1_CS_USE_PWM01 BIT(24) +#define SPI1_USE_CAN BIT(23) +#define DISABLE_DDR_CONFSPACE BIT(20) +#define DDR32TO16EN BIT(16) +#define GMAC1_SHUT BIT(13) +#define GMAC0_SHUT BIT(12) +#define USB_SHUT BIT(11) +#define UART1_3_USE_CAN1 BIT(5) +#define UART1_2_USE_CAN0 BIT(4) +#define GMAC1_USE_TXCLK BIT(3) +#define GMAC0_USE_TXCLK BIT(2) +#define GMAC1_USE_PWM23 BIT(1) +#define GMAC0_USE_PWM01 BIT(0) #endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */ diff --git a/arch/mips/include/asm/mach-loongson32/regs-pwm.h b/arch/mips/include/asm/mach-loongson32/regs-pwm.h index 69f174ed13a4..4119600ce79a 100644 --- a/arch/mips/include/asm/mach-loongson32/regs-pwm.h +++ b/arch/mips/include/asm/mach-loongson32/regs-pwm.h @@ -19,11 +19,11 @@ #define PWM_CTRL 0xc /* PWM Control Register Bits */ -#define CNT_RST (0x1 << 7) -#define INT_SR (0x1 << 6) -#define INT_EN (0x1 << 5) -#define PWM_SINGLE (0x1 << 4) -#define PWM_OE (0x1 << 3) -#define CNT_EN 0x1 +#define CNT_RST BIT(7) +#define INT_SR BIT(6) +#define INT_EN BIT(5) +#define PWM_SINGLE BIT(4) +#define PWM_OE BIT(3) +#define CNT_EN BIT(0) #endif /* __ASM_MACH_LOONGSON32_REGS_PWM_H */ diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c index ddf1d4cbf31e..f2c714d8fb60 100644 --- a/arch/mips/loongson32/common/platform.c +++ b/arch/mips/loongson32/common/platform.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> + * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -10,14 +10,17 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/err.h> +#include <linux/mtd/partitions.h> +#include <linux/sizes.h> #include <linux/phy.h> #include <linux/serial_8250.h> #include <linux/stmmac.h> #include <linux/usb/ehci_pdriver.h> -#include <asm-generic/sizes.h> -#include <cpufreq.h> #include <loongson1.h> +#include <cpufreq.h> +#include <dma.h> +#include <nand.h> /* 8250/16550 compatible UART */ #define LS1X_UART(_id) \ @@ -45,7 +48,7 @@ struct platform_device ls1x_uart_pdev = { }, }; -void __init ls1x_serial_setup(struct platform_device *pdev) +void __init ls1x_serial_set_uartclk(struct platform_device *pdev) { struct clk *clk; struct plat_serial8250_port *p; @@ -77,6 +80,42 @@ struct platform_device ls1x_cpufreq_pdev = { }, }; +/* DMA */ +static struct resource ls1x_dma_resources[] = { + [0] = { + .start = LS1X_DMAC_BASE, + .end = LS1X_DMAC_BASE + SZ_4 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = LS1X_DMA0_IRQ, + .end = LS1X_DMA0_IRQ, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = LS1X_DMA1_IRQ, + .end = LS1X_DMA1_IRQ, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = LS1X_DMA2_IRQ, + .end = LS1X_DMA2_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device ls1x_dma_pdev = { + .name = "ls1x-dma", + .id = -1, + .num_resources = ARRAY_SIZE(ls1x_dma_resources), + .resource = ls1x_dma_resources, +}; + +void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata) +{ + ls1x_dma_pdev.dev.platform_data = pdata; +} + /* Synopsys Ethernet GMAC */ static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = { .phy_mask = 0, @@ -198,6 +237,64 @@ struct platform_device ls1x_eth1_pdev = { }, }; +/* GPIO */ +static struct resource ls1x_gpio0_resources[] = { + [0] = { + .start = LS1X_GPIO0_BASE, + .end = LS1X_GPIO0_BASE + SZ_4 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device ls1x_gpio0_pdev = { + .name = "ls1x-gpio", + .id = 0, + .num_resources = ARRAY_SIZE(ls1x_gpio0_resources), + .resource = ls1x_gpio0_resources, +}; + +static struct resource ls1x_gpio1_resources[] = { + [0] = { + .start = LS1X_GPIO1_BASE, + .end = LS1X_GPIO1_BASE + SZ_4 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device ls1x_gpio1_pdev = { + .name = "ls1x-gpio", + .id = 1, + .num_resources = ARRAY_SIZE(ls1x_gpio1_resources), + .resource = ls1x_gpio1_resources, +}; + +/* NAND Flash */ +static struct resource ls1x_nand_resources[] = { + [0] = { + .start = LS1X_NAND_BASE, + .end = LS1X_NAND_BASE + SZ_32 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* DMA channel 0 is dedicated to NAND */ + .start = LS1X_DMA_CHANNEL0, + .end = LS1X_DMA_CHANNEL0, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device ls1x_nand_pdev = { + .name = "ls1x-nand", + .id = -1, + .num_resources = ARRAY_SIZE(ls1x_nand_resources), + .resource = ls1x_nand_resources, +}; + +void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata) +{ + ls1x_nand_pdev.dev.platform_data = pdata; +} + /* USB EHCI */ static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32); diff --git a/arch/mips/loongson32/common/reset.c b/arch/mips/loongson32/common/reset.c index c41e4ca56ab4..8a1d9cc5a134 100644 --- a/arch/mips/loongson32/common/reset.c +++ b/arch/mips/loongson32/common/reset.c @@ -9,12 +9,13 @@ #include <linux/io.h> #include <linux/pm.h> +#include <linux/sizes.h> #include <asm/idle.h> #include <asm/reboot.h> #include <loongson1.h> -static void __iomem *wdt_base; +static void __iomem *wdt_reg_base; static void ls1x_halt(void) { @@ -26,9 +27,9 @@ static void ls1x_halt(void) static void ls1x_restart(char *command) { - __raw_writel(0x1, wdt_base + WDT_EN); - __raw_writel(0x1, wdt_base + WDT_TIMER); - __raw_writel(0x1, wdt_base + WDT_SET); + __raw_writel(0x1, wdt_reg_base + WDT_EN); + __raw_writel(0x1, wdt_reg_base + WDT_TIMER); + __raw_writel(0x1, wdt_reg_base + WDT_SET); ls1x_halt(); } @@ -40,8 +41,8 @@ static void ls1x_power_off(void) static int __init ls1x_reboot_setup(void) { - wdt_base = ioremap_nocache(LS1X_WDT_BASE, 0x0f); - if (!wdt_base) + wdt_reg_base = ioremap_nocache(LS1X_WDT_BASE, (SZ_4 + SZ_8)); + if (!wdt_reg_base) panic("Failed to remap watchdog registers"); _machine_restart = ls1x_restart; diff --git a/arch/mips/loongson32/common/time.c b/arch/mips/loongson32/common/time.c index 0996b025eeef..ff224f0020e5 100644 --- a/arch/mips/loongson32/common/time.c +++ b/arch/mips/loongson32/common/time.c @@ -9,6 +9,7 @@ #include <linux/clk.h> #include <linux/interrupt.h> +#include <linux/sizes.h> #include <asm/time.h> #include <loongson1.h> @@ -35,25 +36,25 @@ DEFINE_RAW_SPINLOCK(ls1x_timer_lock); -static void __iomem *timer_base; +static void __iomem *timer_reg_base; static uint32_t ls1x_jiffies_per_tick; static inline void ls1x_pwmtimer_set_period(uint32_t period) { - __raw_writel(period, timer_base + PWM_HRC); - __raw_writel(period, timer_base + PWM_LRC); + __raw_writel(period, timer_reg_base + PWM_HRC); + __raw_writel(period, timer_reg_base + PWM_LRC); } static inline void ls1x_pwmtimer_restart(void) { - __raw_writel(0x0, timer_base + PWM_CNT); - __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL); + __raw_writel(0x0, timer_reg_base + PWM_CNT); + __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL); } void __init ls1x_pwmtimer_init(void) { - timer_base = ioremap(LS1X_TIMER_BASE, 0xf); - if (!timer_base) + timer_reg_base = ioremap_nocache(LS1X_TIMER_BASE, SZ_16); + if (!timer_reg_base) panic("Failed to remap timer registers"); ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ); @@ -86,7 +87,7 @@ static cycle_t ls1x_clocksource_read(struct clocksource *cs) */ jifs = jiffies; /* read the count */ - count = __raw_readl(timer_base + PWM_CNT); + count = __raw_readl(timer_reg_base + PWM_CNT); /* * It's possible for count to appear to go the wrong way for this @@ -131,7 +132,7 @@ static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd) raw_spin_lock(&ls1x_timer_lock); ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick); ls1x_pwmtimer_restart(); - __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL); + __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL); raw_spin_unlock(&ls1x_timer_lock); return 0; @@ -140,7 +141,7 @@ static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd) static int ls1x_clockevent_tick_resume(struct clock_event_device *cd) { raw_spin_lock(&ls1x_timer_lock); - __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL); + __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL); raw_spin_unlock(&ls1x_timer_lock); return 0; @@ -149,8 +150,8 @@ static int ls1x_clockevent_tick_resume(struct clock_event_device *cd) static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd) { raw_spin_lock(&ls1x_timer_lock); - __raw_writel(__raw_readl(timer_base + PWM_CTRL) & ~CNT_EN, - timer_base + PWM_CTRL); + __raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN, + timer_reg_base + PWM_CTRL); raw_spin_unlock(&ls1x_timer_lock); return 0; @@ -220,7 +221,7 @@ void __init plat_time_init(void) #ifdef CONFIG_CEVT_CSRC_LS1X /* setup LS1X PWM timer */ - clk = clk_get(NULL, "ls1x_pwmtimer"); + clk = clk_get(NULL, "ls1x-pwmtimer"); if (IS_ERR(clk)) panic("unable to get timer clock, err=%ld", PTR_ERR(clk)); diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c index 58daeea25739..38a1d404be1b 100644 --- a/arch/mips/loongson32/ls1b/board.c +++ b/arch/mips/loongson32/ls1b/board.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> + * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -7,26 +7,83 @@ * option) any later version. */ +#include <linux/leds.h> +#include <linux/mtd/partitions.h> +#include <linux/sizes.h> + +#include <loongson1.h> +#include <dma.h> +#include <nand.h> #include <platform.h> +struct plat_ls1x_dma ls1x_dma_pdata = { + .nr_channels = 3, +}; + +static struct mtd_partition ls1x_nand_parts[] = { + { + .name = "kernel", + .offset = 0, + .size = SZ_16M, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +struct plat_ls1x_nand ls1x_nand_pdata = { + .parts = ls1x_nand_parts, + .nr_parts = ARRAY_SIZE(ls1x_nand_parts), + .hold_cycle = 0x2, + .wait_cycle = 0xc, +}; + +static const struct gpio_led ls1x_gpio_leds[] __initconst = { + { + .name = "LED9", + .default_trigger = "heartbeat", + .gpio = 38, + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, { + .name = "LED6", + .default_trigger = "nand-disk", + .gpio = 39, + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, +}; + +static const struct gpio_led_platform_data ls1x_led_pdata __initconst = { + .num_leds = ARRAY_SIZE(ls1x_gpio_leds), + .leds = ls1x_gpio_leds, +}; + static struct platform_device *ls1b_platform_devices[] __initdata = { &ls1x_uart_pdev, &ls1x_cpufreq_pdev, + &ls1x_dma_pdev, &ls1x_eth0_pdev, &ls1x_eth1_pdev, &ls1x_ehci_pdev, + &ls1x_gpio0_pdev, + &ls1x_gpio1_pdev, + &ls1x_nand_pdev, &ls1x_rtc_pdev, }; static int __init ls1b_platform_init(void) { - int err; + ls1x_serial_set_uartclk(&ls1x_uart_pdev); + ls1x_dma_set_platdata(&ls1x_dma_pdata); + ls1x_nand_set_platdata(&ls1x_nand_pdata); - ls1x_serial_setup(&ls1x_uart_pdev); + gpio_led_register_device(-1, &ls1x_led_pdata); - err = platform_add_devices(ls1b_platform_devices, + return platform_add_devices(ls1b_platform_devices, ARRAY_SIZE(ls1b_platform_devices)); - return err; } arch_initcall(ls1b_platform_init); |