diff options
Diffstat (limited to 'arch/m68k/platform/5307/config.c')
| -rw-r--r-- | arch/m68k/platform/5307/config.c | 147 |
1 files changed, 147 insertions, 0 deletions
diff --git a/arch/m68k/platform/5307/config.c b/arch/m68k/platform/5307/config.c new file mode 100644 index 000000000000..00900ac06a9c --- /dev/null +++ b/arch/m68k/platform/5307/config.c @@ -0,0 +1,147 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/5307/config.c + * + * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2000, Lineo (www.lineo.com) + */ + +/***************************************************************************/ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/io.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfuart.h> +#include <asm/mcfwdebug.h> + +/***************************************************************************/ + +/* + * Some platforms need software versions of the GPIO data registers. + */ +unsigned short ppdata; +unsigned char ledbank = 0xff; + +/***************************************************************************/ + +static struct mcf_platform_uart m5307_uart_platform[] = { + { + .mapbase = MCF_MBAR + MCFUART_BASE1, + .irq = 73, + }, + { + .mapbase = MCF_MBAR + MCFUART_BASE2, + .irq = 74, + }, + { }, +}; + +static struct platform_device m5307_uart = { + .name = "mcfuart", + .id = 0, + .dev.platform_data = m5307_uart_platform, +}; + +static struct platform_device *m5307_devices[] __initdata = { + &m5307_uart, +}; + +/***************************************************************************/ + +static void __init m5307_uart_init_line(int line, int irq) +{ + if (line == 0) { + writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); + writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR); + mcf_mapirq2imr(irq, MCFINTC_UART0); + } else if (line == 1) { + writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); + writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); + mcf_mapirq2imr(irq, MCFINTC_UART1); + } +} + +static void __init m5307_uarts_init(void) +{ + const int nrlines = ARRAY_SIZE(m5307_uart_platform); + int line; + + for (line = 0; (line < nrlines); line++) + m5307_uart_init_line(line, m5307_uart_platform[line].irq); +} + +/***************************************************************************/ + +static void __init m5307_timers_init(void) +{ + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); + mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); +#endif +} + +/***************************************************************************/ + +void m5307_cpu_reset(void) +{ + local_irq_disable(); + /* Set watchdog to soft reset, and enabled */ + __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR); + for (;;) + /* wait for watchdog to timeout */; +} + +/***************************************************************************/ + +void __init config_BSP(char *commandp, int size) +{ +#if defined(CONFIG_NETtel) || \ + defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) + /* Copy command line from FLASH to local buffer... */ + memcpy(commandp, (char *) 0xf0004000, size); + commandp[size-1] = 0; +#endif + + mach_reset = m5307_cpu_reset; + m5307_timers_init(); + m5307_uarts_init(); + + /* Only support the external interrupts on their primary level */ + mcf_mapirq2imr(25, MCFINTC_EINT1); + mcf_mapirq2imr(27, MCFINTC_EINT3); + mcf_mapirq2imr(29, MCFINTC_EINT5); + mcf_mapirq2imr(31, MCFINTC_EINT7); + +#ifdef CONFIG_BDM_DISABLE + /* + * Disable the BDM clocking. This also turns off most of the rest of + * the BDM device. This is good for EMC reasons. This option is not + * incompatible with the memory protection option. + */ + wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK); +#endif +} + +/***************************************************************************/ + +static int __init init_BSP(void) +{ + platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices)); + return 0; +} + +arch_initcall(init_BSP); + +/***************************************************************************/ |