summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/imx23.dtsi52
-rw-r--r--arch/arm/boot/dts/imx27-3ds.dts2
-rw-r--r--arch/arm/boot/dts/imx27.dtsi6
-rw-r--r--arch/arm/boot/dts/imx28.dtsi74
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts2
-rw-r--r--arch/arm/boot/dts/imx51.dtsi4
-rw-r--r--arch/arm/boot/dts/imx53-ard.dts22
-rw-r--r--arch/arm/boot/dts/imx53.dtsi7
-rw-r--r--arch/arm/boot/dts/imx6q-sabrelite.dts1
-rw-r--r--arch/arm/boot/dts/imx6q.dtsi7
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig1
-rw-r--r--arch/arm/configs/mxs_defconfig1
-rw-r--r--arch/arm/configs/tct_hammer_defconfig2
-rw-r--r--arch/arm/mach-davinci/board-neuros-osd2.c39
-rw-r--r--arch/arm/mach-exynos/pm_domains.c2
-rw-r--r--arch/arm/mach-imx/clk-imx27.c8
-rw-r--r--arch/arm/mach-imx/clk-imx31.c2
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c1
-rw-r--r--arch/arm/mach-integrator/core.c1
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c2
-rw-r--r--arch/arm/mach-kirkwood/Makefile.boot4
-rw-r--r--arch/arm/mach-mxs/Kconfig6
-rw-r--r--arch/arm/mach-mxs/Makefile3
-rw-r--r--arch/arm/mach-pxa/raumfeld.c2
-rw-r--r--arch/arm/mach-s3c24xx/Kconfig4
-rw-r--r--arch/arm/mach-sa1100/leds-hackkit.c1
-rw-r--r--arch/arm/mach-tegra/board-harmony-power.c32
-rw-r--r--arch/arm/mm/dma-mapping.c12
-rw-r--r--arch/arm/plat-samsung/Kconfig3
29 files changed, 155 insertions, 148 deletions
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index a874dbfb5ae6..e6138310e5ce 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -51,11 +51,11 @@
dma-apbh@80004000 {
compatible = "fsl,imx23-dma-apbh";
- reg = <0x80004000 2000>;
+ reg = <0x80004000 0x2000>;
};
ecc@80008000 {
- reg = <0x80008000 2000>;
+ reg = <0x80008000 0x2000>;
status = "disabled";
};
@@ -63,7 +63,7 @@
compatible = "fsl,imx23-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch";
@@ -72,14 +72,14 @@
};
ssp0: ssp@80010000 {
- reg = <0x80010000 2000>;
+ reg = <0x80010000 0x2000>;
interrupts = <15 14>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
etm@80014000 {
- reg = <0x80014000 2000>;
+ reg = <0x80014000 0x2000>;
status = "disabled";
};
@@ -87,7 +87,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx23-pinctrl", "simple-bus";
- reg = <0x80018000 2000>;
+ reg = <0x80018000 0x2000>;
gpio0: gpio@0 {
compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
@@ -273,32 +273,32 @@
};
emi@80020000 {
- reg = <0x80020000 2000>;
+ reg = <0x80020000 0x2000>;
status = "disabled";
};
dma-apbx@80024000 {
compatible = "fsl,imx23-dma-apbx";
- reg = <0x80024000 2000>;
+ reg = <0x80024000 0x2000>;
};
dcp@80028000 {
- reg = <0x80028000 2000>;
+ reg = <0x80028000 0x2000>;
status = "disabled";
};
pxp@8002a000 {
- reg = <0x8002a000 2000>;
+ reg = <0x8002a000 0x2000>;
status = "disabled";
};
ocotp@8002c000 {
- reg = <0x8002c000 2000>;
+ reg = <0x8002c000 0x2000>;
status = "disabled";
};
axi-ahb@8002e000 {
- reg = <0x8002e000 2000>;
+ reg = <0x8002e000 0x2000>;
status = "disabled";
};
@@ -310,14 +310,14 @@
};
ssp1: ssp@80034000 {
- reg = <0x80034000 2000>;
+ reg = <0x80034000 0x2000>;
interrupts = <2 20>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
tvenc@80038000 {
- reg = <0x80038000 2000>;
+ reg = <0x80038000 0x2000>;
status = "disabled";
};
};
@@ -330,37 +330,37 @@
ranges;
clkctl@80040000 {
- reg = <0x80040000 2000>;
+ reg = <0x80040000 0x2000>;
status = "disabled";
};
saif0: saif@80042000 {
- reg = <0x80042000 2000>;
+ reg = <0x80042000 0x2000>;
status = "disabled";
};
power@80044000 {
- reg = <0x80044000 2000>;
+ reg = <0x80044000 0x2000>;
status = "disabled";
};
saif1: saif@80046000 {
- reg = <0x80046000 2000>;
+ reg = <0x80046000 0x2000>;
status = "disabled";
};
audio-out@80048000 {
- reg = <0x80048000 2000>;
+ reg = <0x80048000 0x2000>;
status = "disabled";
};
audio-in@8004c000 {
- reg = <0x8004c000 2000>;
+ reg = <0x8004c000 0x2000>;
status = "disabled";
};
lradc@80050000 {
- reg = <0x80050000 2000>;
+ reg = <0x80050000 0x2000>;
status = "disabled";
};
@@ -370,26 +370,26 @@
};
i2c@80058000 {
- reg = <0x80058000 2000>;
+ reg = <0x80058000 0x2000>;
status = "disabled";
};
rtc@8005c000 {
compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
- reg = <0x8005c000 2000>;
+ reg = <0x8005c000 0x2000>;
interrupts = <22>;
};
pwm: pwm@80064000 {
compatible = "fsl,imx23-pwm";
- reg = <0x80064000 2000>;
+ reg = <0x80064000 0x2000>;
#pwm-cells = <2>;
fsl,pwm-number = <5>;
status = "disabled";
};
timrot@80068000 {
- reg = <0x80068000 2000>;
+ reg = <0x80068000 0x2000>;
status = "disabled";
};
@@ -429,7 +429,7 @@
ranges;
usbctrl@80080000 {
- reg = <0x80080000 0x10000>;
+ reg = <0x80080000 0x40000>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts
index d3f8296e19e0..0a8978a40ece 100644
--- a/arch/arm/boot/dts/imx27-3ds.dts
+++ b/arch/arm/boot/dts/imx27-3ds.dts
@@ -27,7 +27,7 @@
status = "okay";
};
- uart@1000a000 {
+ uart1: serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 00bae3aad5ab..5303ab680a34 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -19,6 +19,12 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
};
avic: avic-interrupt-controller@e0000000 {
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 787efac68da8..3fa6d190fab4 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -57,18 +57,18 @@
};
hsadc@80002000 {
- reg = <0x80002000 2000>;
+ reg = <0x80002000 0x2000>;
interrupts = <13 87>;
status = "disabled";
};
dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
- reg = <0x80004000 2000>;
+ reg = <0x80004000 0x2000>;
};
perfmon@80006000 {
- reg = <0x80006000 800>;
+ reg = <0x80006000 0x800>;
interrupts = <27>;
status = "disabled";
};
@@ -77,7 +77,7 @@
compatible = "fsl,imx28-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
@@ -86,28 +86,28 @@
};
ssp0: ssp@80010000 {
- reg = <0x80010000 2000>;
+ reg = <0x80010000 0x2000>;
interrupts = <96 82>;
fsl,ssp-dma-channel = <0>;
status = "disabled";
};
ssp1: ssp@80012000 {
- reg = <0x80012000 2000>;
+ reg = <0x80012000 0x2000>;
interrupts = <97 83>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
ssp2: ssp@80014000 {
- reg = <0x80014000 2000>;
+ reg = <0x80014000 0x2000>;
interrupts = <98 84>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
ssp3: ssp@80016000 {
- reg = <0x80016000 2000>;
+ reg = <0x80016000 0x2000>;
interrupts = <99 85>;
fsl,ssp-dma-channel = <3>;
status = "disabled";
@@ -117,7 +117,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-pinctrl", "simple-bus";
- reg = <0x80018000 2000>;
+ reg = <0x80018000 0x2000>;
gpio0: gpio@0 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
@@ -510,96 +510,96 @@
};
digctl@8001c000 {
- reg = <0x8001c000 2000>;
+ reg = <0x8001c000 0x2000>;
interrupts = <89>;
status = "disabled";
};
etm@80022000 {
- reg = <0x80022000 2000>;
+ reg = <0x80022000 0x2000>;
status = "disabled";
};
dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
- reg = <0x80024000 2000>;
+ reg = <0x80024000 0x2000>;
};
dcp@80028000 {
- reg = <0x80028000 2000>;
+ reg = <0x80028000 0x2000>;
interrupts = <52 53 54>;
status = "disabled";
};
pxp@8002a000 {
- reg = <0x8002a000 2000>;
+ reg = <0x8002a000 0x2000>;
interrupts = <39>;
status = "disabled";
};
ocotp@8002c000 {
- reg = <0x8002c000 2000>;
+ reg = <0x8002c000 0x2000>;
status = "disabled";
};
axi-ahb@8002e000 {
- reg = <0x8002e000 2000>;
+ reg = <0x8002e000 0x2000>;
status = "disabled";
};
lcdif@80030000 {
compatible = "fsl,imx28-lcdif";
- reg = <0x80030000 2000>;
+ reg = <0x80030000 0x2000>;
interrupts = <38 86>;
status = "disabled";
};
can0: can@80032000 {
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
- reg = <0x80032000 2000>;
+ reg = <0x80032000 0x2000>;
interrupts = <8>;
status = "disabled";
};
can1: can@80034000 {
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
- reg = <0x80034000 2000>;
+ reg = <0x80034000 0x2000>;
interrupts = <9>;
status = "disabled";
};
simdbg@8003c000 {
- reg = <0x8003c000 200>;
+ reg = <0x8003c000 0x200>;
status = "disabled";
};
simgpmisel@8003c200 {
- reg = <0x8003c200 100>;
+ reg = <0x8003c200 0x100>;
status = "disabled";
};
simsspsel@8003c300 {
- reg = <0x8003c300 100>;
+ reg = <0x8003c300 0x100>;
status = "disabled";
};
simmemsel@8003c400 {
- reg = <0x8003c400 100>;
+ reg = <0x8003c400 0x100>;
status = "disabled";
};
gpiomon@8003c500 {
- reg = <0x8003c500 100>;
+ reg = <0x8003c500 0x100>;
status = "disabled";
};
simenet@8003c700 {
- reg = <0x8003c700 100>;
+ reg = <0x8003c700 0x100>;
status = "disabled";
};
armjtag@8003c800 {
- reg = <0x8003c800 100>;
+ reg = <0x8003c800 0x100>;
status = "disabled";
};
};
@@ -612,45 +612,45 @@
ranges;
clkctl@80040000 {
- reg = <0x80040000 2000>;
+ reg = <0x80040000 0x2000>;
status = "disabled";
};
saif0: saif@80042000 {
compatible = "fsl,imx28-saif";
- reg = <0x80042000 2000>;
+ reg = <0x80042000 0x2000>;
interrupts = <59 80>;
fsl,saif-dma-channel = <4>;
status = "disabled";
};
power@80044000 {
- reg = <0x80044000 2000>;
+ reg = <0x80044000 0x2000>;
status = "disabled";
};
saif1: saif@80046000 {
compatible = "fsl,imx28-saif";
- reg = <0x80046000 2000>;
+ reg = <0x80046000 0x2000>;
interrupts = <58 81>;
fsl,saif-dma-channel = <5>;
status = "disabled";
};
lradc@80050000 {
- reg = <0x80050000 2000>;
+ reg = <0x80050000 0x2000>;
status = "disabled";
};
spdif@80054000 {
- reg = <0x80054000 2000>;
+ reg = <0x80054000 0x2000>;
interrupts = <45 66>;
status = "disabled";
};
rtc@80056000 {
compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
- reg = <0x80056000 2000>;
+ reg = <0x80056000 0x2000>;
interrupts = <29>;
};
@@ -658,7 +658,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
- reg = <0x80058000 2000>;
+ reg = <0x80058000 0x2000>;
interrupts = <111 68>;
clock-frequency = <100000>;
status = "disabled";
@@ -668,7 +668,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
- reg = <0x8005a000 2000>;
+ reg = <0x8005a000 0x2000>;
interrupts = <110 69>;
clock-frequency = <100000>;
status = "disabled";
@@ -676,14 +676,14 @@
pwm: pwm@80064000 {
compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
- reg = <0x80064000 2000>;
+ reg = <0x80064000 0x2000>;
#pwm-cells = <2>;
fsl,pwm-number = <8>;
status = "disabled";
};
timrot@80068000 {
- reg = <0x80068000 2000>;
+ reg = <0x80068000 0x2000>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index de065b5976e6..cd86177a3ea2 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -53,7 +53,7 @@
spi-max-frequency = <6000000>;
reg = <0>;
interrupt-parent = <&gpio1>;
- interrupts = <8>;
+ interrupts = <8 0x4>;
regulators {
sw1_reg: sw1 {
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 53cbaa3d4f90..aba28dc87fc8 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -17,6 +17,10 @@
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
};
tzic: tz-interrupt-controller@e0000000 {
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 5b8eafcdbeec..da895e93a999 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -64,12 +64,32 @@
reg = <0xf4000000 0x2000000>;
phy-mode = "mii";
interrupt-parent = <&gpio2>;
- interrupts = <31>;
+ interrupts = <31 0x8>;
reg-io-width = <4>;
+ /*
+ * VDD33A and VDDVARIO of LAN9220 are supplied by
+ * SW4_3V3 of LTC3589. Before the regulator driver
+ * for this PMIC is available, we use a fixed dummy
+ * 3V3 regulator to get LAN9220 driver probing work.
+ */
+ vdd33a-supply = <&reg_3p3v>;
+ vddvario-supply = <&reg_3p3v>;
smsc,irq-push-pull;
};
};
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index fc79cdc4b4e6..cd37165edce5 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -19,6 +19,13 @@
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
};
tzic: tz-interrupt-controller@0fffc000 {
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index d42e851ceb97..72f30f3e6171 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -53,6 +53,7 @@
fsl,pins = <
144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+ 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
>;
};
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 3d3c64b014e6..fd57079f71a9 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -19,6 +19,13 @@
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
};
cpus {
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index f725b9637b33..3c9f32f9b6b4 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
+CONFIG_MXS_DMA=y
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index ccdb6357fb74..4edcfb4e4dee 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -34,7 +34,6 @@ CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_AUTO_ZRELADDR=y
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 1d24f8458bef..71277a1591ba 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_KALLSYMS is not set
-# CONFIG_BUG is not set
+# CONFIG_BUGVERBOSE is not set
# CONFIG_ELF_CORE is not set
# CONFIG_SHMEM is not set
CONFIG_SLOB=y
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 5de69f2fcca9..f6b9fc70161b 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void)
dm644x_init();
}
-/*
- I2C initialization
-*/
-static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
- .bus_freq = 20 /* kHz */,
- .bus_delay = 100 /* usec */,
-};
-
-static struct i2c_board_info __initdata ntosd2_i2c_info[] = {
-};
-
-static int ntosd2_init_i2c(void)
-{
- int status;
-
- davinci_init_i2c(&ntosd2_i2c_pdata);
- status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
- if (status == 0) {
- status = gpio_direction_input(NTOSD2_MSP430_IRQ);
- if (status == 0) {
- status = gpio_to_irq(NTOSD2_MSP430_IRQ);
- if (status > 0) {
- ntosd2_i2c_info[0].irq = status;
- i2c_register_board_info(1,
- ntosd2_i2c_info,
- ARRAY_SIZE(ntosd2_i2c_info));
- }
- }
- }
- return status;
-}
-
static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
.wires = 4,
.version = MMC_CTLR_VERSION_1
@@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void)
{
struct clk *aemif_clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
- int status;
aemif_clk = clk_get(NULL, "aemif");
clk_enable(aemif_clk);
@@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void)
platform_add_devices(davinci_ntosd2_devices,
ARRAY_SIZE(davinci_ntosd2_devices));
- /* Initialize I2C interface specific for this board */
- status = ntosd2_init_i2c();
- if (status < 0)
- pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
- " %d\n", status);
-
davinci_serial_init(&uart_config);
dm644x_init_asp(&dm644x_ntosd2_snd_data);
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 373c3c00d24c..c0bc83a7663e 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void)
}
#endif /* CONFIG_OF */
-static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
+static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
struct exynos_pm_domain *pd)
{
if (pdev->dev.bus) {
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 7aa6313fb167..f69ca4680049 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
- clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0");
+ clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
@@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma");
- clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma");
+ clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0");
+ clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0");
+ clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
+ clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 8e19e70f90f9..1253af2d9971 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
- clk_register_clkdev(clk[kpp_gate], "kpp", NULL);
+ clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index f6086693ebd2..4bdcaa97bd98 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -303,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_prepare_enable(clk[aips_tz2]); /* fec */
clk_prepare_enable(clk[spba]);
clk_prepare_enable(clk[emi_fast_gate]); /* fec */
+ clk_prepare_enable(clk[emi_slow_gate]); /* eim */
clk_prepare_enable(clk[tmax1]);
clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */
clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index ebf680bebdf2..3fa6c51390da 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 7b1055c8e0b9..3b2267529f5e 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -456,7 +456,7 @@ static void __init ap_init_timer(void)
clk = clk_get_sys("ap_timer", NULL);
BUG_ON(IS_ERR(clk));
- clk_enable(clk);
+ clk_prepare_enable(clk);
rate = clk_get_rate(clk);
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index 2a576abf409b..a5717558ee89 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -9,5 +9,5 @@ dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb
dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
-dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
-dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
+dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
+dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index ccdf83b17cf1..9a8bbda195b2 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -2,9 +2,6 @@ if ARCH_MXS
source "arch/arm/mach-mxs/devices/Kconfig"
-config MXS_OCOTP
- bool
-
config SOC_IMX23
bool
select ARM_AMBA
@@ -66,7 +63,6 @@ config MACH_MX28EVK
select MXS_HAVE_PLATFORM_MXS_SAIF
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_RTC_STMP3XXX
- select MXS_OCOTP
help
Include support for MX28EVK platform. This includes specific
configurations for the board and its peripherals.
@@ -94,7 +90,6 @@ config MODULE_M28
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
- select MXS_OCOTP
config MODULE_APX4
bool
@@ -106,7 +101,6 @@ config MODULE_APX4
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXS_SAIF
- select MXS_OCOTP
config MACH_TX28
bool "Ka-Ro TX28 module"
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index e41590ccb437..fed3695a1339 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,7 +1,6 @@
# Common support
-obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o
+obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o
-obj-$(CONFIG_MXS_OCOTP) += ocotp.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 5905ed130e94..d89d87ae144c 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
static struct eeti_ts_platform_data eeti_ts_pdata = {
.irq_active_high = 1,
+ .irq_gpio = GPIO_TOUCH_IRQ,
};
static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
.type = "eeti_ts",
.addr = 0x0a,
- .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
.platform_data = &eeti_ts_pdata,
};
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index e24961109b70..d56b0f7f2b20 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02
select I2C
select POWER_SUPPLY
select MACH_NEO1973
- select S3C2410_PWM
+ select S3C24XX_PWM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
@@ -493,7 +493,7 @@ config MACH_RX1950
select S3C24XX_DCLK
select PM_H1940 if PM
select I2C
- select S3C2410_PWM
+ select S3C24XX_PWM
select S3C_DEV_NAND
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
index 6a2352436e62..f8e47235babe 100644
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ b/arch/arm/mach-sa1100/leds-hackkit.c
@@ -10,6 +10,7 @@
* as cpu led, the green one is used as timer led.
*/
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 8fd387bf31f0..b7344beec102 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -51,7 +51,7 @@ static struct regulator_init_data ldo0_data = {
.consumer_supplies = tps658621_ldo0_supply,
};
-#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv) \
+#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\
static struct regulator_init_data _id##_data = { \
.supply_regulator = _supply, \
.constraints = { \
@@ -63,21 +63,22 @@ static struct regulator_init_data ldo0_data = {
.valid_ops_mask = (REGULATOR_CHANGE_MODE | \
REGULATOR_CHANGE_STATUS | \
REGULATOR_CHANGE_VOLTAGE), \
+ .always_on = _on, \
}, \
}
-HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500);
-HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500);
-HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550);
-HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500);
-HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500);
-HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475);
-HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300);
+HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1);
+HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1);
+HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1);
+HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1);
+HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0);
+HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1);
+HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1);
+HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1);
+HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0);
+HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0);
+HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0);
+HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1);
#define TPS_REG(_id, _data) \
{ \
@@ -119,9 +120,10 @@ static struct i2c_board_info __initdata harmony_regulators[] = {
int __init harmony_regulator_init(void)
{
+ regulator_register_always_on(0, "vdd_sys",
+ NULL, 0, 5000000);
+
if (machine_is_harmony()) {
- regulator_register_always_on(0, "vdd_sys",
- NULL, 0, 5000000);
i2c_register_board_info(3, harmony_regulators, 1);
} else { /* Harmony, booted using device tree */
struct device_node *np;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c2cdf6500f75..4e7d1182e8a3 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -358,7 +358,7 @@ void __init dma_contiguous_remap(void)
if (end > arm_lowmem_limit)
end = arm_lowmem_limit;
if (start >= end)
- return;
+ continue;
map.pfn = __phys_to_pfn(start);
map.virtual = __phys_to_virt(start);
@@ -423,7 +423,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page)
unsigned int pageno;
unsigned long flags;
void *ptr = NULL;
- size_t align;
+ unsigned long align_mask;
if (!pool->vaddr) {
WARN(1, "coherent pool not initialised!\n");
@@ -435,11 +435,11 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page)
* small, so align them to their order in pages, minimum is a page
* size. This helps reduce fragmentation of the DMA space.
*/
- align = PAGE_SIZE << get_order(size);
+ align_mask = (1 << get_order(size)) - 1;
spin_lock_irqsave(&pool->lock, flags);
pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages,
- 0, count, (1 << align) - 1);
+ 0, count, align_mask);
if (pageno < pool->nr_pages) {
bitmap_set(pool->bitmap, pageno, count);
ptr = pool->vaddr + PAGE_SIZE * pageno;
@@ -648,12 +648,12 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
if (arch_is_coherent() || nommu()) {
__dma_free_buffer(page, size);
+ } else if (__free_from_pool(cpu_addr, size)) {
+ return;
} else if (!IS_ENABLED(CONFIG_CMA)) {
__dma_free_remap(cpu_addr, size);
__dma_free_buffer(page, size);
} else {
- if (__free_from_pool(cpu_addr, size))
- return;
/*
* Non-atomic allocations cannot be freed with IRQs disabled
*/
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 7aca31c1df1f..9c3b90c3538e 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI
config S3C24XX_PWM
bool "PWM device support"
- select HAVE_PWM
+ select PWM
+ select PWM_SAMSUNG
help
Support for exporting the PWM timer blocks via the pwm device
system