diff options
Diffstat (limited to 'arch/arm64')
29 files changed, 142 insertions, 186 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 0d1f026d831a..6872135d7f84 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -67,14 +67,6 @@ }; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy-handle = <&ext_rgmii_phy>; - status = "okay"; -}; - &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -85,13 +77,6 @@ bias-pull-up; }; -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts index 24f1aac366d6..f82ccf332c0f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts @@ -48,18 +48,3 @@ /* TODO: Camera, touchscreen, etc. */ }; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy-handle = <&ext_rgmii_phy>; - status = "okay"; -}; - -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 08cda24ea194..7c533b6d4ba9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -78,15 +78,6 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rmii_pins>; - phy-mode = "rmii"; - phy-handle = <&ext_rmii_phy1>; - status = "okay"; - -}; - &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -97,13 +88,6 @@ bias-pull-up; }; -&mdio { - ext_rmii_phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 17eb1cc5bf6b..d891a1a27f6c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -76,21 +76,6 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy-handle = <&ext_rgmii_phy>; - status = "okay"; -}; - -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 9d00622ce845..68aadc9b96dc 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -449,26 +449,6 @@ #size-cells = <0>; }; - emac: ethernet@1c30000 { - compatible = "allwinner,sun50i-a64-emac"; - syscon = <&syscon>; - reg = <0x01c30000 0x100>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index 968908761194..1c2387bd5df6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -50,7 +50,6 @@ compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5"; aliases { - ethernet0 = &emac; serial0 = &uart0; }; @@ -109,22 +108,6 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&mdio { - ext_rgmii_phy: ethernet-phy@7 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <7>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index a8296feee884..4f77c8470f6c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -59,7 +59,6 @@ }; aliases { - ethernet0 = &emac; serial0 = &uart0; }; @@ -137,28 +136,12 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - status = "okay"; -}; - &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; status = "okay"; }; -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index d906b302cbcd..6be06873e5af 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -54,7 +54,6 @@ compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5"; aliases { - ethernet0 = &emac; serial0 = &uart0; }; @@ -144,28 +143,12 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - status = "okay"; -}; - &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; status = "okay"; }; -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 732e2e06f503..d9a720bff05d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -120,5 +120,8 @@ }; &pio { + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; compatible = "allwinner,sun50i-h5-pinctrl"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 35b8c88c3220..738ed689ff69 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -400,7 +400,7 @@ }; pwm_AO_ab: pwm@550 { - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm"; reg = <0x0 0x00550 0x0 0x10>; #pwm-cells = <3>; status = "disabled"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 72c5a9f64ca8..94567eb17875 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -109,8 +109,8 @@ status = "okay"; pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; + clocks = <&xtal> , <&xtal>; + clock-names = "clkin0", "clkin1" ; }; &pwm_ef { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 890821d6e52b..266fbcf3e47f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -10,12 +10,20 @@ #include <dt-bindings/input/input.h> -#include "meson-gxl-s905x-p212.dtsi" +#include "meson-gxl-s905x.dtsi" / { compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; model = "Libre Technology CC"; + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cvbs-connector { compatible = "composite-video-connector"; @@ -26,6 +34,11 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -53,6 +66,39 @@ linux,default-trigger = "heartbeat"; }; }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_card: regulator-vcc-card { + compatible = "regulator-gpio"; + + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &cvbs_vdac_port { @@ -61,6 +107,16 @@ }; }; +ðmac { + status = "okay"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; @@ -73,20 +129,43 @@ }; }; -/* - * The following devices exists but are exposed on the general - * purpose GPIO header. End user may well decide to use those pins - * for another purpose - */ +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; -&sd_emmc_a { - status = "disabled"; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_card>; }; -&uart_A { - status = "disabled"; +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <50000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; }; -&wifi32k { - status = "disabled"; +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index dbcc3d4e2ed5..51763d674050 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -219,7 +219,7 @@ reg = <0x18800 0x100>, <0x18C00 0x20>; gpiosb: gpio { #gpio-cells = <2>; - gpio-ranges = <&pinctrl_sb 0 0 29>; + gpio-ranges = <&pinctrl_sb 0 0 30>; gpio-controller; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 1eb1f1e9aac4..4d360713ed12 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -268,10 +268,10 @@ ap_gpio: gpio { compatible = "marvell,armada-8k-gpio"; offset = <0x1040>; - ngpios = <19>; + ngpios = <20>; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&ap_pinctrl 0 0 19>; + gpio-ranges = <&ap_pinctrl 0 0 20>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index 726528ce54e9..4c68605675a8 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -270,6 +270,7 @@ interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cpm_clk 1 26>; + dma-coherent; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 95f8e5f607f6..923f354b02f0 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -64,7 +64,7 @@ compatible = "marvell,armada-8k-rtc"; reg = <0x284000 0x20>, <0x284080 0x24>; reg-names = "rtc", "rtc-soc"; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; }; cps_ethernet: ethernet@0 { @@ -261,6 +261,7 @@ interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cps_clk 1 26>; + dma-coherent; /* * The cryptographic engine found on the cp110 * master is enabled by default at the SoC diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index aef35e0b685a..f903957da504 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -45,7 +45,7 @@ stdout-path = "serial0:115200n8"; }; - audio_clkout: audio_clkout { + audio_clkout: audio-clkout { /* * This is same as <&rcar_sound 0> * but needed to avoid cs2000/rcar_sound probe dead-lock @@ -508,7 +508,7 @@ /* audio_clkout0/1/2/3 */ #clock-cells = <1>; - clock-frequency = <11289600 12288000>; + clock-frequency = <12288000 11289600>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index b5c6ee07d7f9..d1a3f3b7a0ab 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -281,7 +281,7 @@ /* audio_clkout0/1/2/3 */ #clock-cells = <1>; - clock-frequency = <11289600 12288000>; + clock-frequency = <12288000 11289600>; status = "okay"; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 6c7d147eed54..b4ca115b3be1 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -476,6 +476,7 @@ CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y +CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_ARM_MHU=y CONFIG_PLATFORM_MHU=y diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h index 74d08e44a651..a652ce0a5cb2 100644 --- a/arch/arm64/include/asm/arch_timer.h +++ b/arch/arm64/include/asm/arch_timer.h @@ -65,13 +65,13 @@ DECLARE_PER_CPU(const struct arch_timer_erratum_workaround *, u64 _val; \ if (needs_unstable_timer_counter_workaround()) { \ const struct arch_timer_erratum_workaround *wa; \ - preempt_disable(); \ + preempt_disable_notrace(); \ wa = __this_cpu_read(timer_unstable_counter_workaround); \ if (wa && wa->read_##reg) \ _val = wa->read_##reg(); \ else \ _val = read_sysreg(reg); \ - preempt_enable(); \ + preempt_enable_notrace(); \ } else { \ _val = read_sysreg(reg); \ } \ diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h index acae781f7359..3288c2b36731 100644 --- a/arch/arm64/include/asm/elf.h +++ b/arch/arm64/include/asm/elf.h @@ -114,10 +114,10 @@ /* * This is the base location for PIE (ET_DYN with INTERP) loads. On - * 64-bit, this is raised to 4GB to leave the entire 32-bit address + * 64-bit, this is above 4GB to leave the entire 32-bit address * space open for things that want to use the area for 32-bit pointers. */ -#define ELF_ET_DYN_BASE 0x100000000UL +#define ELF_ET_DYN_BASE (2 * TASK_SIZE_64 / 3) #ifndef __ASSEMBLY__ diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index d68630007b14..e923b58606e2 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -326,12 +326,6 @@ void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte); int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end); int kvm_test_age_hva(struct kvm *kvm, unsigned long hva); -/* We do not have shadow page tables, hence the empty hooks */ -static inline void kvm_arch_mmu_notifier_invalidate_page(struct kvm *kvm, - unsigned long address) -{ -} - struct kvm_vcpu *kvm_arm_get_running_vcpu(void); struct kvm_vcpu * __percpu *kvm_get_running_vcpus(void); void kvm_arm_halt_guest(struct kvm *kvm); diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index 32f82723338a..ef39dcb9ca6a 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -64,8 +64,10 @@ * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area. */ #define VA_BITS (CONFIG_ARM64_VA_BITS) -#define VA_START (UL(0xffffffffffffffff) << VA_BITS) -#define PAGE_OFFSET (UL(0xffffffffffffffff) << (VA_BITS - 1)) +#define VA_START (UL(0xffffffffffffffff) - \ + (UL(1) << VA_BITS) + 1) +#define PAGE_OFFSET (UL(0xffffffffffffffff) - \ + (UL(1) << (VA_BITS - 1)) + 1) #define KIMAGE_VADDR (MODULES_END) #define MODULES_END (MODULES_VADDR + MODULES_VSIZE) #define MODULES_VADDR (VA_START + KASAN_SHADOW_SIZE) diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 06da8ea16bbe..c7b4995868e1 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -161,9 +161,11 @@ void fpsimd_flush_thread(void) { if (!system_supports_fpsimd()) return; + preempt_disable(); memset(¤t->thread.fpsimd_state, 0, sizeof(struct fpsimd_state)); fpsimd_flush_task_state(current); set_thread_flag(TIF_FOREIGN_FPSTATE); + preempt_enable(); } /* diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 973df7de7bf8..adb0910b88f5 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -354,7 +354,6 @@ __primary_switched: tst x23, ~(MIN_KIMG_ALIGN - 1) // already running randomized? b.ne 0f mov x0, x21 // pass FDT address in x0 - mov x1, x23 // pass modulo offset in x1 bl kaslr_early_init // parse FDT for KASLR options cbz x0, 0f // KASLR disabled? just proceed orr x23, x23, x0 // record KASLR offset diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c index a9710efb8c01..47080c49cc7e 100644 --- a/arch/arm64/kernel/kaslr.c +++ b/arch/arm64/kernel/kaslr.c @@ -75,7 +75,7 @@ extern void *__init __fixmap_remap_fdt(phys_addr_t dt_phys, int *size, * containing function pointers) to be reinitialized, and zero-initialized * .bss variables will be reset to 0. */ -u64 __init kaslr_early_init(u64 dt_phys, u64 modulo_offset) +u64 __init kaslr_early_init(u64 dt_phys) { void *fdt; u64 seed, offset, mask, module_range; @@ -131,15 +131,17 @@ u64 __init kaslr_early_init(u64 dt_phys, u64 modulo_offset) /* * The kernel Image should not extend across a 1GB/32MB/512MB alignment * boundary (for 4KB/16KB/64KB granule kernels, respectively). If this - * happens, increase the KASLR offset by the size of the kernel image - * rounded up by SWAPPER_BLOCK_SIZE. + * happens, round down the KASLR offset by (1 << SWAPPER_TABLE_SHIFT). + * + * NOTE: The references to _text and _end below will already take the + * modulo offset (the physical displacement modulo 2 MB) into + * account, given that the physical placement is controlled by + * the loader, and will not change as a result of the virtual + * mapping we choose. */ - if ((((u64)_text + offset + modulo_offset) >> SWAPPER_TABLE_SHIFT) != - (((u64)_end + offset + modulo_offset) >> SWAPPER_TABLE_SHIFT)) { - u64 kimg_sz = _end - _text; - offset = (offset + round_up(kimg_sz, SWAPPER_BLOCK_SIZE)) - & mask; - } + if ((((u64)_text + offset) >> SWAPPER_TABLE_SHIFT) != + (((u64)_end + offset) >> SWAPPER_TABLE_SHIFT)) + offset = round_down(offset, 1 << SWAPPER_TABLE_SHIFT); if (IS_ENABLED(CONFIG_KASAN)) /* diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index d48f47080213..8a62648848e5 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -523,7 +523,7 @@ static void cntfrq_read_handler(unsigned int esr, struct pt_regs *regs) { int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT; - pt_regs_write_reg(regs, rt, read_sysreg(cntfrq_el0)); + pt_regs_write_reg(regs, rt, arch_timer_get_rate()); regs->pc += 4; } diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 77862881ae86..2e070d3baf9f 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -764,7 +764,7 @@ static bool access_pmovs(struct kvm_vcpu *vcpu, struct sys_reg_params *p, if (p->is_write) { if (r->CRm & 0x2) /* accessing PMOVSSET_EL0 */ - kvm_pmu_overflow_set(vcpu, p->regval & mask); + vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= (p->regval & mask); else /* accessing PMOVSCLR_EL0 */ vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= ~(p->regval & mask); diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index c7861c9864e6..1f22a41565a3 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -163,26 +163,27 @@ int ptep_set_access_flags(struct vm_area_struct *vma, /* only preserve the access flags and write permission */ pte_val(entry) &= PTE_AF | PTE_WRITE | PTE_DIRTY; - /* - * PTE_RDONLY is cleared by default in the asm below, so set it in - * back if necessary (read-only or clean PTE). - */ + /* set PTE_RDONLY if actual read-only or clean PTE */ if (!pte_write(entry) || !pte_sw_dirty(entry)) pte_val(entry) |= PTE_RDONLY; /* * Setting the flags must be done atomically to avoid racing with the - * hardware update of the access/dirty state. + * hardware update of the access/dirty state. The PTE_RDONLY bit must + * be set to the most permissive (lowest value) of *ptep and entry + * (calculated as: a & b == ~(~a | ~b)). */ + pte_val(entry) ^= PTE_RDONLY; asm volatile("// ptep_set_access_flags\n" " prfm pstl1strm, %2\n" "1: ldxr %0, %2\n" - " and %0, %0, %3 // clear PTE_RDONLY\n" + " eor %0, %0, %3 // negate PTE_RDONLY in *ptep\n" " orr %0, %0, %4 // set flags\n" + " eor %0, %0, %3 // negate final PTE_RDONLY\n" " stxr %w1, %0, %2\n" " cbnz %w1, 1b\n" : "=&r" (old_pteval), "=&r" (tmp), "+Q" (pte_val(*ptep)) - : "L" (~PTE_RDONLY), "r" (pte_val(entry))); + : "L" (PTE_RDONLY), "r" (pte_val(entry))); flush_tlb_fix_spurious_fault(vma, address); return 1; @@ -434,8 +435,11 @@ retry: * the mmap_sem because it would already be released * in __lock_page_or_retry in mm/filemap.c. */ - if (fatal_signal_pending(current)) + if (fatal_signal_pending(current)) { + if (!user_mode(regs)) + goto no_context; return 0; + } /* * Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk of |