diff options
Diffstat (limited to 'arch/arm/mach-pxa')
25 files changed, 1023 insertions, 124 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index d89c6adbe8bc..dee92182749b 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -37,6 +37,8 @@ config MACH_ZYLONITE320 config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" select PXA3xx + select CPU_PXA300 + select CPU_PXA310 select PXA_SSP config MACH_TAVOREVB @@ -63,6 +65,15 @@ config ARCH_VIPER select HAVE_PWM select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS + select ARCOM_PCMCIA + +config MACH_ARCOM_ZEUS + bool "Arcom/Eurotech ZEUS SBC" + select PXA27x + select ISA + select PXA_HAVE_BOARD_IRQS + select PXA_HAVE_ISA_IRQS + select ARCOM_PCMCIA config MACH_BALLOON3 bool "Balloon 3 board" @@ -101,6 +112,8 @@ config MACH_CM_X300 bool "CompuLab CM-X300 modules" select PXA3xx select CPU_PXA300 + select CPU_PXA310 + select HAVE_PWM config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" @@ -179,6 +192,11 @@ config MACH_TRIZEPS_ANY endchoice +config ARCOM_PCMCIA + bool + help + Generic option for Arcom Viper/Zeus PCMCIA + config TRIZEPS_PCMCIA bool help @@ -226,7 +244,6 @@ config MACH_COLIBRI300 select PXA3xx select CPU_PXA300 select CPU_PXA310 - select HAVE_PWM config MACH_COLIBRI320 bool "Toradex Colibri PXA320" diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index b5d29e60a341..f64afda7e6f6 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_MACH_SAAR) += saar.o # 3rd Party Dev Platforms obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_ARCH_VIPER) += viper.o +obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o obj-$(CONFIG_MACH_BALLOON3) += balloon3.o obj-$(CONFIG_MACH_CSB726) += csb726.o obj-$(CONFIG_CSB726_CSB701) += csb701.o diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 3395463bb5a6..8e10db148f1b 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,7 +4,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <mach/hardware.h> #include <mach/udc.h> #include <mach/pxafb.h> #include <mach/mmc.h> @@ -14,6 +13,7 @@ #include <mach/pxa2xx_spi.h> #include <mach/camera.h> #include <mach/audio.h> +#include <mach/hardware.h> #include <plat/i2c.h> #include <plat/pxa3xx_nand.h> diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 1c0de808b54d..c8a01bc85fde 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -497,16 +497,15 @@ static int em_x270_usb_hub_init(void) goto err_free_vbus_gpio; /* USB Hub power-on and reset */ - gpio_direction_output(usb_hub_reset, 0); + gpio_direction_output(usb_hub_reset, 1); + gpio_direction_output(GPIO9_USB_VBUS_EN, 0); regulator_enable(em_x270_usb_ldo); - gpio_set_value(usb_hub_reset, 1); gpio_set_value(usb_hub_reset, 0); + gpio_set_value(usb_hub_reset, 1); regulator_disable(em_x270_usb_ldo); regulator_enable(em_x270_usb_ldo); - gpio_set_value(usb_hub_reset, 1); - - /* enable VBUS */ - gpio_direction_output(GPIO9_USB_VBUS_EN, 1); + gpio_set_value(usb_hub_reset, 0); + gpio_set_value(GPIO9_USB_VBUS_EN, 1); return 0; diff --git a/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h new file mode 100644 index 000000000000..d428be4db44c --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h @@ -0,0 +1,11 @@ +#ifndef __ARCOM_PCMCIA_H +#define __ARCOM_PCMCIA_H + +struct arcom_pcmcia_pdata { + int cd_gpio; + int rdy_gpio; + int pwr_gpio; + void (*reset)(int state); +}; + +#endif diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 50f1297bf5ac..e741bf1bfb2d 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -250,20 +250,17 @@ #define cpu_is_pxa930() \ ({ \ - unsigned int id = read_cpuid(CPUID_ID); \ - __cpu_is_pxa930(id); \ + __cpu_is_pxa930(read_cpuid_id()); \ }) #define cpu_is_pxa935() \ ({ \ - unsigned int id = read_cpuid(CPUID_ID); \ - __cpu_is_pxa935(id); \ + __cpu_is_pxa935(read_cpuid_id()); \ }) #define cpu_is_pxa950() \ ({ \ - unsigned int id = read_cpuid(CPUID_ID); \ - __cpu_is_pxa950(id); \ + __cpu_is_pxa950(read_cpuid_id()); \ }) diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h index 10988c270ca3..5f5fbf1f6489 100644 --- a/arch/arm/mach-pxa/include/mach/viper.h +++ b/arch/arm/mach-pxa/include/mach/viper.h @@ -85,8 +85,6 @@ /* Interrupt and Configuration Register (VIPER_ICR) */ /* This is a write only register. Only CF_RST is used under Linux */ -extern void viper_cf_rst(int state); - #define VIPER_ICR_RETRIG (1 << 0) #define VIPER_ICR_AUTO_CLR (1 << 1) #define VIPER_ICR_R_DIS (1 << 2) diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h new file mode 100644 index 000000000000..c387046d2f28 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -0,0 +1,82 @@ +/* + * arch/arm/mach-pxa/include/mach/zeus.h + * + * Author: David Vrabel + * Created: Sept 28, 2005 + * Copyright: Arcom Control Systems Ltd. + * + * Maintained by: Marc Zyngier <maz@misterjones.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _MACH_ZEUS_H +#define _MACH_ZEUS_H + +/* Physical addresses */ +#define ZEUS_FLASH_PHYS PXA_CS0_PHYS +#define ZEUS_ETH0_PHYS PXA_CS1_PHYS +#define ZEUS_ETH1_PHYS PXA_CS2_PHYS +#define ZEUS_CPLD_PHYS (PXA_CS4_PHYS+0x2000000) +#define ZEUS_SRAM_PHYS PXA_CS5_PHYS +#define ZEUS_PC104IO_PHYS (0x30000000) + +#define ZEUS_CPLD_VERSION_PHYS (ZEUS_CPLD_PHYS + 0x00000000) +#define ZEUS_CPLD_ISA_IRQ_PHYS (ZEUS_CPLD_PHYS + 0x00800000) +#define ZEUS_CPLD_CONTROL_PHYS (ZEUS_CPLD_PHYS + 0x01000000) +#define ZEUS_CPLD_EXTWDOG_PHYS (ZEUS_CPLD_PHYS + 0x01800000) + +/* GPIOs */ +#define ZEUS_AC97_GPIO 0 +#define ZEUS_WAKEUP_GPIO 1 +#define ZEUS_UARTA_GPIO 9 +#define ZEUS_UARTB_GPIO 10 +#define ZEUS_UARTC_GPIO 12 +#define ZEUS_UARTD_GPIO 11 +#define ZEUS_ETH0_GPIO 14 +#define ZEUS_ISA_GPIO 17 +#define ZEUS_BKLEN_GPIO 19 +#define ZEUS_USB2_PWREN_GPIO 22 +#define ZEUS_PTT_GPIO 27 +#define ZEUS_CF_CD_GPIO 35 +#define ZEUS_MMC_WP_GPIO 52 +#define ZEUS_MMC_CD_GPIO 53 +#define ZEUS_EXTGPIO_GPIO 91 +#define ZEUS_CF_PWEN_GPIO 97 +#define ZEUS_CF_RDY_GPIO 99 +#define ZEUS_LCD_EN_GPIO 101 +#define ZEUS_ETH1_GPIO 113 +#define ZEUS_CAN_GPIO 116 + +#define ZEUS_EXT0_GPIO_BASE 128 +#define ZEUS_EXT1_GPIO_BASE 160 +#define ZEUS_USER_GPIO_BASE 192 + +#define ZEUS_EXT0_GPIO(x) (ZEUS_EXT0_GPIO_BASE + (x)) +#define ZEUS_EXT1_GPIO(x) (ZEUS_EXT1_GPIO_BASE + (x)) +#define ZEUS_USER_GPIO(x) (ZEUS_USER_GPIO_BASE + (x)) + +/* + * CPLD registers: + * Only 4 registers, but spreaded over a 32MB address space. + * Be gentle, and remap that over 32kB... + */ + +#define ZEUS_CPLD (0xf0000000) +#define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000) +#define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000) +#define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000) +#define ZEUS_CPLD_EXTWDOG (ZEUS_CPLD + 0x3000) + +/* CPLD register bits */ +#define ZEUS_CPLD_CONTROL_CF_RST 0x01 + +#define ZEUS_PC104IO (0xf1000000) + +#define ZEUS_SRAM_SIZE (256 * 1024) + +#endif + + diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h index bf6785adccf4..9edf645368d6 100644 --- a/arch/arm/mach-pxa/include/mach/zylonite.h +++ b/arch/arm/mach-pxa/include/mach/zylonite.h @@ -8,13 +8,6 @@ /* the following variables are processor specific and initialized * by the corresponding zylonite_pxa3xx_init() */ -struct platform_mmc_slot { - int gpio_cd; - int gpio_wp; -}; - -extern struct platform_mmc_slot zylonite_mmc_slot[]; - extern int gpio_eth_irq; extern int gpio_debug_led1; extern int gpio_debug_led2; diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index f28c1715b910..fa527b258d61 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -110,6 +110,12 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = { GPIO7_MMC1_CLK, GPIO8_MMC1_CMD, GPIO15_GPIO, /* card detect */ + + /* UART3 */ + GPIO107_UART3_CTS, + GPIO108_UART3_RTS, + GPIO109_UART3_TXD, + GPIO110_UART3_RXD, }; static struct resource smc91x_resources[] = { diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 8a38d604dc77..189f330719a2 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -381,7 +381,7 @@ err: return ret; } -static int magician_backlight_notify(int brightness) +static int magician_backlight_notify(struct device *dev, int brightness) { gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness); if (brightness >= 200) { diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 59140217890a..e100af78b166 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -270,7 +270,7 @@ err: return ret; } -static int palmld_backlight_notify(int brightness) +static int palmld_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness); gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness); diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 7f89ca20f13a..8fe3ec27568f 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -209,7 +209,7 @@ err: return ret; } -static int palmt5_backlight_notify(int brightness) +static int palmt5_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness); gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness); diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 308417592007..b992f07ece21 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -185,7 +185,7 @@ err: return ret; } -static int palmtc_backlight_notify(int brightness) +static int palmtc_backlight_notify(struct device *dev, int brightness) { /* backlight is on when GPIO16 AF0 is high */ gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness); diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 265d62bae7de..dc728d6ab94e 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -181,7 +181,7 @@ err: return ret; } -static int palmte2_backlight_notify(int brightness) +static int palmte2_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness); gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness); diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 606eb7e8a17e..b433bb496711 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -375,7 +375,7 @@ err: return ret; } -static int treo_backlight_notify(int brightness) +static int treo_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness); return TREO_MAX_INTENSITY - brightness; diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 7bf18c2f002f..b37a025c0b7b 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -269,7 +269,7 @@ err: return ret; } -static int palmtx_backlight_notify(int brightness) +static int palmtx_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness); gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness); diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index d787ac7cfdd8..1c5d68a94511 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -196,7 +196,7 @@ err: return ret; } -static int palmz72_backlight_notify(int brightness) +static int palmz72_backlight_notify(struct device *dev, int brightness) { gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness); gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index e5eeb3a62d01..c2b938a4d5c9 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -293,7 +293,7 @@ static struct pxamci_platform_data poodle_mci_platform_data = { .init = poodle_mci_init, .setpower = poodle_mci_setpower, .exit = poodle_mci_exit, - .gpio_card_detect = POODLE_IRQ_GPIO_nSD_DETECT, + .gpio_card_detect = POODLE_GPIO_nSD_DETECT, .gpio_card_ro = POODLE_GPIO_nSD_WP, .gpio_power = -1, }; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 4b50f144fa48..28352c0b8c34 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -389,13 +389,13 @@ static struct gpio_keys_button spitz_gpio_keys[] = { .type = EV_SW, .code = 0, .gpio = SPITZ_GPIO_SWA, - .desc = "Display Down", + .desc = "Display Down", }, { .type = EV_SW, .code = 1, .gpio = SPITZ_GPIO_SWB, - .desc = "Lid Closed", + .desc = "Lid Closed", }, }; diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index cf0d71b7797e..89f258c9e126 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -47,6 +47,7 @@ #include <mach/pxafb.h> #include <plat/i2c.h> #include <mach/regs-uart.h> +#include <mach/arcom-pcmcia.h> #include <mach/viper.h> #include <asm/setup.h> @@ -76,14 +77,28 @@ static void viper_icr_clear_bit(unsigned int bit) } /* This function is used from the pcmcia module to reset the CF */ -void viper_cf_rst(int state) +static void viper_cf_reset(int state) { if (state) viper_icr_set_bit(VIPER_ICR_CF_RST); else viper_icr_clear_bit(VIPER_ICR_CF_RST); } -EXPORT_SYMBOL(viper_cf_rst); + +static struct arcom_pcmcia_pdata viper_pcmcia_info = { + .cd_gpio = VIPER_CF_CD_GPIO, + .rdy_gpio = VIPER_CF_RDY_GPIO, + .pwr_gpio = VIPER_CF_POWER_GPIO, + .reset = viper_cf_reset, +}; + +static struct platform_device viper_pcmcia_device = { + .name = "viper-pcmcia", + .id = -1, + .dev = { + .platform_data = &viper_pcmcia_info, + }, +}; /* * The CPLD version register was not present on VIPER boards prior to @@ -364,7 +379,7 @@ err_request_bckl: return ret; } -static int viper_backlight_notify(int brightness) +static int viper_backlight_notify(struct device *dev, int brightness) { gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness); gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness); @@ -685,6 +700,7 @@ static struct platform_device *viper_devs[] __initdata = { &viper_mtd_devices[0], &viper_mtd_devices[1], &viper_backlight_device, + &viper_pcmcia_device, }; static mfp_cfg_t viper_pin_config[] __initdata = { diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c new file mode 100644 index 000000000000..75f2a37f945d --- /dev/null +++ b/arch/arm/mach-pxa/zeus.c @@ -0,0 +1,850 @@ +/* + * Support for the Arcom ZEUS. + * + * Copyright (C) 2006 Arcom Control Systems Ltd. + * + * Loosely based on Arcom's 2.6.16.28. + * Maintained by Marc Zyngier <maz@misterjones.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpufreq.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/pm.h> +#include <linux/gpio.h> +#include <linux/serial_8250.h> +#include <linux/dm9000.h> +#include <linux/mmc/host.h> +#include <linux/spi/spi.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/i2c/pca953x.h> +#include <linux/apm-emulation.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/i2c.h> + +#include <mach/pxa2xx-regs.h> +#include <mach/regs-uart.h> +#include <mach/ohci.h> +#include <mach/mmc.h> +#include <mach/pxa27x-udc.h> +#include <mach/udc.h> +#include <mach/pxafb.h> +#include <mach/pxa2xx_spi.h> +#include <mach/mfp-pxa27x.h> +#include <mach/pm.h> +#include <mach/audio.h> +#include <mach/arcom-pcmcia.h> +#include <mach/zeus.h> + +#include "generic.h" + +/* + * Interrupt handling + */ + +static unsigned long zeus_irq_enabled_mask; +static const int zeus_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, }; +static const int zeus_isa_irq_map[] = { + 0, /* ISA irq #0, invalid */ + 0, /* ISA irq #1, invalid */ + 0, /* ISA irq #2, invalid */ + 1 << 0, /* ISA irq #3 */ + 1 << 1, /* ISA irq #4 */ + 1 << 2, /* ISA irq #5 */ + 1 << 3, /* ISA irq #6 */ + 1 << 4, /* ISA irq #7 */ + 0, /* ISA irq #8, invalid */ + 0, /* ISA irq #9, invalid */ + 1 << 5, /* ISA irq #10 */ + 1 << 6, /* ISA irq #11 */ + 1 << 7, /* ISA irq #12 */ +}; + +static inline int zeus_irq_to_bitmask(unsigned int irq) +{ + return zeus_isa_irq_map[irq - PXA_ISA_IRQ(0)]; +} + +static inline int zeus_bit_to_irq(int bit) +{ + return zeus_isa_irqs[bit] + PXA_ISA_IRQ(0); +} + +static void zeus_ack_irq(unsigned int irq) +{ + __raw_writew(zeus_irq_to_bitmask(irq), ZEUS_CPLD_ISA_IRQ); +} + +static void zeus_mask_irq(unsigned int irq) +{ + zeus_irq_enabled_mask &= ~(zeus_irq_to_bitmask(irq)); +} + +static void zeus_unmask_irq(unsigned int irq) +{ + zeus_irq_enabled_mask |= zeus_irq_to_bitmask(irq); +} + +static inline unsigned long zeus_irq_pending(void) +{ + return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask; +} + +static void zeus_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned long pending; + + pending = zeus_irq_pending(); + do { + /* we're in a chained irq handler, + * so ack the interrupt by hand */ + desc->chip->ack(gpio_to_irq(ZEUS_ISA_GPIO)); + + if (likely(pending)) { + irq = zeus_bit_to_irq(__ffs(pending)); + generic_handle_irq(irq); + } + pending = zeus_irq_pending(); + } while (pending); +} + +static struct irq_chip zeus_irq_chip = { + .name = "ISA", + .ack = zeus_ack_irq, + .mask = zeus_mask_irq, + .unmask = zeus_unmask_irq, +}; + +static void __init zeus_init_irq(void) +{ + int level; + int isa_irq; + + pxa27x_init_irq(); + + /* Peripheral IRQs. It would be nice to move those inside driver + configuration, but it is not supported at the moment. */ + set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO), IRQ_TYPE_EDGE_FALLING); + set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING); + + /* Setup ISA IRQs */ + for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) { + isa_irq = zeus_bit_to_irq(level); + set_irq_chip(isa_irq, &zeus_irq_chip); + set_irq_handler(isa_irq, handle_edge_irq); + set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE); + } + + set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING); + set_irq_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler); +} + + +/* + * Platform devices + */ + +/* Flash */ +static struct resource zeus_mtd_resources[] = { + [0] = { /* NOR Flash (up to 64MB) */ + .start = ZEUS_FLASH_PHYS, + .end = ZEUS_FLASH_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* SRAM */ + .start = ZEUS_SRAM_PHYS, + .end = ZEUS_SRAM_PHYS + SZ_512K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct physmap_flash_data zeus_flash_data[] = { + [0] = { + .width = 2, + .parts = NULL, + .nr_parts = 0, + }, +}; + +static struct platform_device zeus_mtd_devices[] = { + [0] = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &zeus_flash_data[0], + }, + .resource = &zeus_mtd_resources[0], + .num_resources = 1, + }, +}; + +/* Serial */ +static struct resource zeus_serial_resources[] = { + { + .start = 0x10000000, + .end = 0x1000000f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x10800000, + .end = 0x1080000f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x11000000, + .end = 0x1100000f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x40100000, + .end = 0x4010001f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x40200000, + .end = 0x4020001f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x40700000, + .end = 0x4070001f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct plat_serial8250_port serial_platform_data[] = { + /* External UARTs */ + /* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */ + { /* COM1 */ + .mapbase = 0x10000000, + .irq = gpio_to_irq(ZEUS_UARTA_GPIO), + .irqflags = IRQF_TRIGGER_RISING, + .uartclk = 14745600, + .regshift = 1, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { /* COM2 */ + .mapbase = 0x10800000, + .irq = gpio_to_irq(ZEUS_UARTB_GPIO), + .irqflags = IRQF_TRIGGER_RISING, + .uartclk = 14745600, + .regshift = 1, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { /* COM3 */ + .mapbase = 0x11000000, + .irq = gpio_to_irq(ZEUS_UARTC_GPIO), + .irqflags = IRQF_TRIGGER_RISING, + .uartclk = 14745600, + .regshift = 1, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { /* COM4 */ + .mapbase = 0x11800000, + .irq = gpio_to_irq(ZEUS_UARTD_GPIO), + .irqflags = IRQF_TRIGGER_RISING, + .uartclk = 14745600, + .regshift = 1, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + /* Internal UARTs */ + { /* FFUART */ + .membase = (void *)&FFUART, + .mapbase = __PREG(FFUART), + .irq = IRQ_FFUART, + .uartclk = 921600 * 16, + .regshift = 2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { /* BTUART */ + .membase = (void *)&BTUART, + .mapbase = __PREG(BTUART), + .irq = IRQ_BTUART, + .uartclk = 921600 * 16, + .regshift = 2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { /* STUART */ + .membase = (void *)&STUART, + .mapbase = __PREG(STUART), + .irq = IRQ_STUART, + .uartclk = 921600 * 16, + .regshift = 2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { }, +}; + +static struct platform_device zeus_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, + .num_resources = ARRAY_SIZE(zeus_serial_resources), + .resource = zeus_serial_resources, +}; + +/* Ethernet */ +static struct resource zeus_dm9k0_resource[] = { + [0] = { + .start = ZEUS_ETH0_PHYS, + .end = ZEUS_ETH0_PHYS + 1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = ZEUS_ETH0_PHYS + 2, + .end = ZEUS_ETH0_PHYS + 3, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = gpio_to_irq(ZEUS_ETH0_GPIO), + .end = gpio_to_irq(ZEUS_ETH0_GPIO), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct resource zeus_dm9k1_resource[] = { + [0] = { + .start = ZEUS_ETH1_PHYS, + .end = ZEUS_ETH1_PHYS + 1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = ZEUS_ETH1_PHYS + 2, + .end = ZEUS_ETH1_PHYS + 3, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = gpio_to_irq(ZEUS_ETH1_GPIO), + .end = gpio_to_irq(ZEUS_ETH1_GPIO), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct dm9000_plat_data zeus_dm9k_platdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device zeus_dm9k0_device = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(zeus_dm9k0_resource), + .resource = zeus_dm9k0_resource, + .dev = { + .platform_data = &zeus_dm9k_platdata, + } +}; + +static struct platform_device zeus_dm9k1_device = { + .name = "dm9000", + .id = 1, + .num_resources = ARRAY_SIZE(zeus_dm9k1_resource), + .resource = zeus_dm9k1_resource, + .dev = { + .platform_data = &zeus_dm9k_platdata, + } +}; + +/* External SRAM */ +static struct resource zeus_sram_resource = { + .start = ZEUS_SRAM_PHYS, + .end = ZEUS_SRAM_PHYS + ZEUS_SRAM_SIZE * 2 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device zeus_sram_device = { + .name = "pxa2xx-8bit-sram", + .id = 0, + .num_resources = 1, + .resource = &zeus_sram_resource, +}; + +/* SPI interface on SSP3 */ +static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = { + .num_chipselect = 1, + .enable_dma = 1, +}; + +static struct platform_device pxa2xx_spi_ssp3_device = { + .name = "pxa2xx-spi", + .id = 3, + .dev = { + .platform_data = &pxa2xx_spi_ssp3_master_info, + }, +}; + +/* Leds */ +static struct gpio_led zeus_leds[] = { + [0] = { + .name = "zeus:yellow:1", + .default_trigger = "heartbeat", + .gpio = ZEUS_EXT0_GPIO(3), + .active_low = 1, + }, + [1] = { + .name = "zeus:yellow:2", + .default_trigger = "default-on", + .gpio = ZEUS_EXT0_GPIO(4), + .active_low = 1, + }, + [2] = { + .name = "zeus:yellow:3", + .default_trigger = "default-on", + .gpio = ZEUS_EXT0_GPIO(5), + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data zeus_leds_info = { + .leds = zeus_leds, + .num_leds = ARRAY_SIZE(zeus_leds), +}; + +static struct platform_device zeus_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &zeus_leds_info, + }, +}; + +static void zeus_cf_reset(int state) +{ + u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL); + + if (state) + cpld_state |= ZEUS_CPLD_CONTROL_CF_RST; + else + cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST; + + __raw_writew(cpld_state, ZEUS_CPLD_CONTROL); +} + +static struct arcom_pcmcia_pdata zeus_pcmcia_info = { + .cd_gpio = ZEUS_CF_CD_GPIO, + .rdy_gpio = ZEUS_CF_RDY_GPIO, + .pwr_gpio = ZEUS_CF_PWEN_GPIO, + .reset = zeus_cf_reset, +}; + +static struct platform_device zeus_pcmcia_device = { + .name = "zeus-pcmcia", + .id = -1, + .dev = { + .platform_data = &zeus_pcmcia_info, + }, +}; + +static struct platform_device *zeus_devices[] __initdata = { + &zeus_serial_device, + &zeus_mtd_devices[0], + &zeus_dm9k0_device, + &zeus_dm9k1_device, + &zeus_sram_device, + &pxa2xx_spi_ssp3_device, + &zeus_leds_device, + &zeus_pcmcia_device, +}; + +/* AC'97 */ +static pxa2xx_audio_ops_t zeus_ac97_info = { + .reset_gpio = 95, +}; + + +/* + * USB host + */ + +static int zeus_ohci_init(struct device *dev) +{ + int err; + + /* Switch on port 2. */ + if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) { + dev_err(dev, "Can't request USB2_PWREN\n"); + return err; + } + + if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) { + gpio_free(ZEUS_USB2_PWREN_GPIO); + dev_err(dev, "Can't enable USB2_PWREN\n"); + return err; + } + + /* Port 2 is shared between host and client interface. */ + UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; + + return 0; +} + +static void zeus_ohci_exit(struct device *dev) +{ + /* Power-off port 2 */ + gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0); + gpio_free(ZEUS_USB2_PWREN_GPIO); +} + +static struct pxaohci_platform_data zeus_ohci_platform_data = { + .port_mode = PMM_NPS_MODE, + .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, + .init = zeus_ohci_init, + .exit = zeus_ohci_exit, +}; + +/* + * Flat Panel + */ + +static void zeus_lcd_power(int on, struct fb_var_screeninfo *si) +{ + gpio_set_value(ZEUS_LCD_EN_GPIO, on); +} + +static void zeus_backlight_power(int on) +{ + gpio_set_value(ZEUS_BKLEN_GPIO, on); +} + +static int zeus_setup_fb_gpios(void) +{ + int err; + + if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN"))) + goto out_err; + + if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0))) + goto out_err_lcd; + + if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN"))) + goto out_err_lcd; + + if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0))) + goto out_err_bkl; + + return 0; + +out_err_bkl: + gpio_free(ZEUS_BKLEN_GPIO); +out_err_lcd: + gpio_free(ZEUS_LCD_EN_GPIO); +out_err: + return err; +} + +static struct pxafb_mode_info zeus_fb_mode_info[] = { + { + .pixclock = 39722, + + .xres = 640, + .yres = 480, + + .bpp = 16, + + .hsync_len = 63, + .left_margin = 16, + .right_margin = 81, + + .vsync_len = 2, + .upper_margin = 12, + .lower_margin = 31, + + .sync = 0, + }, +}; + +static struct pxafb_mach_info zeus_fb_info = { + .modes = zeus_fb_mode_info, + .num_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, + .pxafb_lcd_power = zeus_lcd_power, + .pxafb_backlight_power = zeus_backlight_power, +}; + +/* + * MMC/SD Device + * + * The card detect interrupt isn't debounced so we delay it by 250ms + * to give the card a chance to fully insert/eject. + */ + +static struct pxamci_platform_data zeus_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .detect_delay = HZ/4, + .gpio_card_detect = ZEUS_MMC_CD_GPIO, + .gpio_card_ro = ZEUS_MMC_WP_GPIO, + .gpio_card_ro_invert = 1, + .gpio_power = -1 +}; + +/* + * USB Device Controller + */ +static void zeus_udc_command(int cmd) +{ + switch (cmd) { + case PXA2XX_UDC_CMD_DISCONNECT: + pr_info("zeus: disconnecting USB client\n"); + UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; + break; + + case PXA2XX_UDC_CMD_CONNECT: + pr_info("zeus: connecting USB client\n"); + UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE; + break; + } +} + +static struct pxa2xx_udc_mach_info zeus_udc_info = { + .udc_command = zeus_udc_command, +}; + +static void zeus_power_off(void) +{ + local_irq_disable(); + pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP); +} + +#ifdef CONFIG_APM_EMULATION +static void zeus_get_power_status(struct apm_power_info *info) +{ + /* Power supply is always present */ + info->ac_line_status = APM_AC_ONLINE; + info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT; + info->battery_flag = APM_BATTERY_FLAG_NOT_PRESENT; +} + +static inline void zeus_setup_apm(void) +{ + apm_get_power_status = zeus_get_power_status; +} +#else +static inline void zeus_setup_apm(void) +{ +} +#endif + +static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio, + unsigned ngpio, void *context) +{ + int i; + u8 pcb_info = 0; + + for (i = 0; i < 8; i++) { + int pcb_bit = gpio + i + 8; + + if (gpio_request(pcb_bit, "pcb info")) { + dev_err(&client->dev, "Can't request pcb info %d\n", i); + continue; + } + + if (gpio_direction_input(pcb_bit)) { + dev_err(&client->dev, "Can't read pcb info %d\n", i); + gpio_free(pcb_bit); + continue; + } + + pcb_info |= !!gpio_get_value(pcb_bit) << i; + + gpio_free(pcb_bit); + } + + dev_info(&client->dev, "Zeus PCB version %d issue %d\n", + pcb_info >> 4, pcb_info & 0xf); + + return 0; +} + +static struct pca953x_platform_data zeus_pca953x_pdata[] = { + [0] = { .gpio_base = ZEUS_EXT0_GPIO_BASE, }, + [1] = { + .gpio_base = ZEUS_EXT1_GPIO_BASE, + .setup = zeus_get_pcb_info, + }, + [2] = { .gpio_base = ZEUS_USER_GPIO_BASE, }, +}; + +static struct i2c_board_info __initdata zeus_i2c_devices[] = { + { + I2C_BOARD_INFO("pca9535", 0x21), + .platform_data = &zeus_pca953x_pdata[0], + }, + { + I2C_BOARD_INFO("pca9535", 0x22), + .platform_data = &zeus_pca953x_pdata[1], + }, + { + I2C_BOARD_INFO("pca9535", 0x20), + .platform_data = &zeus_pca953x_pdata[2], + .irq = gpio_to_irq(ZEUS_EXTGPIO_GPIO), + }, + { I2C_BOARD_INFO("lm75a", 0x48) }, + { I2C_BOARD_INFO("24c01", 0x50) }, + { I2C_BOARD_INFO("isl1208", 0x6f) }, +}; + +static mfp_cfg_t zeus_pin_config[] __initdata = { + GPIO15_nCS_1, + GPIO78_nCS_2, + GPIO80_nCS_4, + GPIO33_nCS_5, + + GPIO22_GPIO, + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + GPIO119_USBH2_PWR, + GPIO120_USBH2_PEN, + + GPIO86_LCD_LDD_16, + GPIO87_LCD_LDD_17, + + GPIO102_GPIO, + GPIO104_CIF_DD_2, + GPIO105_CIF_DD_1, + + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + GPIO36_GPIO, /* CF CD */ + GPIO97_GPIO, /* CF PWREN */ + GPIO99_GPIO, /* CF RDY */ +}; + +/* + * DM9k MSCx settings: SRAM, 16 bits + * 17 cycles delay first access + * 5 cycles delay next access + * 13 cycles recovery time + * faster device + */ +#define DM9K_MSC_VALUE 0xe4c9 + +static void __init zeus_init(void) +{ + u16 dm9000_msc = DM9K_MSC_VALUE; + + system_rev = __raw_readw(ZEUS_CPLD_VERSION); + pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f)); + + /* Fix timings for dm9000s (CS1/CS2)*/ + MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16); + MSC1 = (MSC1 & 0xffff0000) | dm9000_msc; + + pm_power_off = zeus_power_off; + zeus_setup_apm(); + + pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config)); + + platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices)); + + pxa_set_ohci_info(&zeus_ohci_platform_data); + + if (zeus_setup_fb_gpios()) + pr_err("Failed to setup fb gpios\n"); + else + set_pxa_fb_info(&zeus_fb_info); + + pxa_set_mci_info(&zeus_mci_platform_data); + pxa_set_udc_info(&zeus_udc_info); + pxa_set_ac97_info(&zeus_ac97_info); + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices)); +} + +static struct map_desc zeus_io_desc[] __initdata = { + { + .virtual = ZEUS_CPLD_VERSION, + .pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS), + .length = 0x1000, + .type = MT_DEVICE, + }, + { + .virtual = ZEUS_CPLD_ISA_IRQ, + .pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS), + .length = 0x1000, + .type = MT_DEVICE, + }, + { + .virtual = ZEUS_CPLD_CONTROL, + .pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS), + .length = 0x1000, + .type = MT_DEVICE, + }, + { + .virtual = ZEUS_CPLD_EXTWDOG, + .pfn = __phys_to_pfn(ZEUS_CPLD_EXTWDOG_PHYS), + .length = 0x1000, + .type = MT_DEVICE, + }, + { + .virtual = ZEUS_PC104IO, + .pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS), + .length = 0x00800000, + .type = MT_DEVICE, + }, +}; + +static void __init zeus_map_io(void) +{ + pxa_map_io(); + + iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc)); + + /* Clear PSPR to ensure a full restart on wake-up. */ + PMCR = PSPR = 0; + + /* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */ + OSCC |= OSCC_OON; + + /* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...). + * float chip selects and PCMCIA */ + PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP; +} + +MACHINE_START(ARCOM_ZEUS, "Arcom ZEUS") + /* Maintainer: Marc Zyngier <maz@misterjones.org> */ + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc), + .boot_params = 0xa0000100, + .map_io = zeus_map_io, + .init_irq = zeus_init_irq, + .timer = &pxa_timer, + .init_machine = zeus_init, +MACHINE_END + diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index b66e9e2d06e7..2b4043c04d0c 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -36,9 +36,6 @@ #include "devices.h" #include "generic.h" -#define MAX_SLOTS 3 -struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS]; - int gpio_eth_irq; int gpio_debug_led1; int gpio_debug_led2; @@ -220,84 +217,28 @@ static inline void zylonite_init_lcd(void) {} #endif #if defined(CONFIG_MMC) -static int zylonite_mci_ro(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - - return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp); -} - -static int zylonite_mci_init(struct device *dev, - irq_handler_t zylonite_detect_int, - void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int err, cd_irq, gpio_cd, gpio_wp; - - cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); - gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; - gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; - - /* - * setup GPIO for Zylonite MMC controller - */ - err = gpio_request(gpio_cd, "mmc card detect"); - if (err) - goto err_request_cd; - gpio_direction_input(gpio_cd); - - err = gpio_request(gpio_wp, "mmc write protect"); - if (err) - goto err_request_wp; - gpio_direction_input(gpio_wp); - - err = request_irq(cd_irq, zylonite_detect_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "MMC card detect", data); - if (err) { - printk(KERN_ERR "%s: MMC/SD/SDIO: " - "can't request card detect IRQ\n", __func__); - goto err_request_irq; - } - - return 0; - -err_request_irq: - gpio_free(gpio_wp); -err_request_wp: - gpio_free(gpio_cd); -err_request_cd: - return err; -} - -static void zylonite_mci_exit(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int cd_irq, gpio_cd, gpio_wp; - - cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); - gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; - gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; - - free_irq(cd_irq, data); - gpio_free(gpio_cd); - gpio_free(gpio_wp); -} - static struct pxamci_platform_data zylonite_mci_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = zylonite_mci_init, - .exit = zylonite_mci_exit, - .get_ro = zylonite_mci_ro, - .gpio_card_detect = -1, - .gpio_card_ro = -1, + .gpio_card_detect = EXT_GPIO(0), + .gpio_card_ro = EXT_GPIO(2), .gpio_power = -1, }; static struct pxamci_platform_data zylonite_mci2_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = EXT_GPIO(1), + .gpio_card_ro = EXT_GPIO(3), + .gpio_power = -1, +}; + +static struct pxamci_platform_data zylonite_mci3_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = EXT_GPIO(30), + .gpio_card_ro = EXT_GPIO(31), + .gpio_power = -1, }; static void __init zylonite_init_mmc(void) @@ -305,7 +246,7 @@ static void __init zylonite_init_mmc(void) pxa_set_mci_info(&zylonite_mci_platform_data); pxa3xx_set_mci2_info(&zylonite_mci2_platform_data); if (cpu_is_pxa310()) - pxa3xx_set_mci3_info(&zylonite_mci_platform_data); + pxa3xx_set_mci3_info(&zylonite_mci3_platform_data); } #else static inline void zylonite_init_mmc(void) {} diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 84095440a878..3aa73b3e33f2 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -129,8 +129,8 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO22_I2C_SDA, /* GPIO */ - GPIO18_GPIO, /* GPIO Expander #0 INT_N */ - GPIO19_GPIO, /* GPIO Expander #1 INT_N */ + GPIO18_GPIO | MFP_PULL_HIGH, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO | MFP_PULL_HIGH, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { @@ -258,10 +258,6 @@ void __init zylonite_pxa300_init(void) /* detect LCD panel */ zylonite_detect_lcd_panel(); - /* MMC card detect & write protect for controller 0 */ - zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0); - zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2); - /* WM9713 IRQ */ wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26); @@ -276,10 +272,6 @@ void __init zylonite_pxa300_init(void) if (cpu_is_pxa310()) { pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg)); gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102); - - /* MMC card detect & write protect for controller 2 */ - zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30); - zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31); } /* GPIOs for Debug LEDs */ diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 60d08f23f5e4..9942bac4cf7d 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -209,10 +209,6 @@ void __init zylonite_pxa320_init(void) gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2); gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2); - /* MMC card detect & write protect for controller 0 */ - zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1); - zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5); - /* WM9713 IRQ */ wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15); } |