diff options
Diffstat (limited to 'arch/arm/mach-omap2')
45 files changed, 750 insertions, 756 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 61bf3c3ce6fc..4cf5142f22cc 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS_TYPICAL select MENELAUS if ARCH_OMAP2 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 + select HIGHMEM help Compile a kernel suitable for booting most boards diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index 1f97e7475206..447682c4e11c 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -39,26 +39,23 @@ static struct platform_device am35xx_emac_mdio_device = { static void am35xx_enable_emac_int(void) { - u32 regval; - - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR | - AM35XX_CPGMAC_C0_MISC_PULSE_CLR | - AM35XX_CPGMAC_C0_RX_THRESH_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + u32 v; + + v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR | + AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR); + omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); + omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ } static void am35xx_disable_emac_int(void) { - u32 regval; + u32 v; - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR); + omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); + omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ } static struct emac_platform_data am35xx_emac_pdata = { @@ -92,7 +89,7 @@ static struct platform_device am35xx_emac_device = { void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) { - unsigned int regval; + u32 v; int err; am35xx_emac_pdata.rmii_en = rmii_en; @@ -110,8 +107,8 @@ void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) return; } - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); - omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + v &= ~AM35XX_CPGMACSS_SW_RST; + omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET); + omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */ } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index da75f239873e..37abb0d49b51 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -37,7 +37,7 @@ #include <plat/dma.h> #include <plat/gpmc.h> #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/gpmc-smc91x.h> @@ -113,9 +113,6 @@ static struct gpio sdp3430_dss_gpios[] __initdata = { {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, }; -static int lcd_enabled; -static int dvi_enabled; - static void __init sdp3430_display_init(void) { int r; @@ -129,44 +126,18 @@ static void __init sdp3430_display_init(void) static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) { - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); - lcd_enabled = 1; - return 0; } static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) { - lcd_enabled = 0; - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); } -static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - - dvi_enabled = 1; - - return 0; -} - -static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - dvi_enabled = 0; -} - static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) { return 0; @@ -186,15 +157,14 @@ static struct omap_dss_device sdp3430_lcd_device = { .platform_disable = sdp3430_panel_disable_lcd, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = sdp3430_panel_enable_dvi, - .platform_disable = sdp3430_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = -1, }; static struct omap_dss_device sdp3430_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 6dc184841892..94af6cde2e36 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -384,6 +384,11 @@ static struct platform_device sdp4430_dmic_codec = { .id = -1, }; +static struct platform_device sdp4430_hdmi_audio_codec = { + .name = "hdmi-audio-codec", + .id = -1, +}; + static struct omap_abe_twl6040_data sdp4430_abe_audio_data = { .card_name = "SDP4430", .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, @@ -418,6 +423,7 @@ static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_vbat, &sdp4430_dmic_codec, &sdp4430_abe_audio, + &sdp4430_hdmi_audio_codec, }; static struct omap_musb_board_data musb_board_data = { @@ -571,7 +577,9 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VANA | TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | - TWL_COMMON_REGULATOR_CLK32KG); + TWL_COMMON_REGULATOR_CLK32KG | + TWL_COMMON_REGULATOR_V1V8 | + TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &sdp4430_twldata, &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); @@ -622,6 +630,10 @@ static struct nokia_dsi_panel_data dsi1_panel = { .use_ext_te = false, .ext_te_gpio = 101, .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, }; static struct omap_dss_device sdp4430_lcd_device = { @@ -630,13 +642,6 @@ static struct omap_dss_device sdp4430_lcd_device = { .type = OMAP_DISPLAY_TYPE_DSI, .data = &dsi1_panel, .phy.dsi = { - .clk_lane = 1, - .clk_pol = 0, - .data1_lane = 2, - .data1_pol = 0, - .data2_lane = 3, - .data2_pol = 0, - .module = 0, }, @@ -671,6 +676,10 @@ static struct nokia_dsi_panel_data dsi2_panel = { .use_ext_te = false, .ext_te_gpio = 103, .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, }; static struct omap_dss_device sdp4430_lcd2_device = { @@ -679,12 +688,6 @@ static struct omap_dss_device sdp4430_lcd2_device = { .type = OMAP_DISPLAY_TYPE_DSI, .data = &dsi2_panel, .phy.dsi = { - .clk_lane = 1, - .clk_pol = 0, - .data1_lane = 2, - .data1_pol = 0, - .data2_lane = 3, - .data2_pol = 0, .module = 1, }, @@ -714,21 +717,6 @@ static struct omap_dss_device sdp4430_lcd2_device = { .channel = OMAP_DSS_CHANNEL_LCD2, }; -static void sdp4430_lcd_init(void) -{ - int r; - - r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT, - "lcd1_reset_gpio"); - if (r) - pr_err("%s: Could not get lcd1_reset_gpio\n", __func__); - - r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT, - "lcd2_reset_gpio"); - if (r) - pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); -} - static struct omap_dss_hdmi_data sdp4430_hdmi_data = { .hpd_gpio = HDMI_GPIO_HPD, }; @@ -814,7 +802,6 @@ static void __init omap_4430sdp_display_init(void) if (r) pr_err("%s: Could not get display_sel GPIO\n", __func__); - sdp4430_lcd_init(); sdp4430_picodlp_init(); omap_display_init(&sdp4430_dss_data); /* diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index c3851e8de28b..3b8a53c1f2a8 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -30,6 +30,7 @@ #include "common.h" #include <plat/usb.h> +#include "am35xx-emac.h" #include "mux.h" #include "control.h" @@ -90,6 +91,7 @@ static void __init am3517_crane_init(void) } usbhs_init(&usbhs_bdata); + am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); } MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 3645285a3e2b..99790eb646e8 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -37,7 +37,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include "am35xx-emac.h" #include "mux.h" @@ -207,31 +207,14 @@ static struct omap_dss_device am3517_evm_tv_device = { .platform_disable = am3517_evm_panel_disable_tv, }; -static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - dvi_enabled = 1; - - return 0; -} - -static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = am3517_evm_panel_enable_dvi, - .platform_disable = am3517_evm_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = -1, }; static struct omap_dss_device am3517_evm_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 909a8b91b564..c03df142ea67 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -44,7 +44,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/mcspi.h> #include <mach/hardware.h> @@ -218,25 +218,6 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) gpio_set_value(CM_T35_LCD_EN_GPIO, 0); } -static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - - gpio_set_value(CM_T35_DVI_EN_GPIO, 0); - dvi_enabled = 1; - - return 0; -} - -static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(CM_T35_DVI_EN_GPIO, 1); - dvi_enabled = 0; -} - static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev) { return 0; @@ -260,15 +241,14 @@ static struct omap_dss_device cm_t35_lcd_device = { .phy.dpi.data_lines = 18, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = cm_t35_panel_enable_dvi, - .platform_disable = cm_t35_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = CM_T35_DVI_EN_GPIO, }; static struct omap_dss_device cm_t35_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -316,7 +296,6 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { static struct gpio cm_t35_dss_gpios[] __initdata = { { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, - { CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable" }, }; static void __init cm_t35_init_display(void) @@ -335,7 +314,6 @@ static void __init cm_t35_init_display(void) gpio_export(CM_T35_LCD_EN_GPIO, 0); gpio_export(CM_T35_LCD_BL_GPIO, 0); - gpio_export(CM_T35_DVI_EN_GPIO, 0); msleep(50); gpio_set_value(CM_T35_LCD_EN_GPIO, 1); @@ -498,6 +476,10 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = { .setup = cm_t35_twl_gpio_setup, }; +static struct twl4030_power_data cm_t35_power_data = { + .use_poweroff = true, +}; + static struct twl4030_platform_data cm_t35_twldata = { /* platform_data for children goes here */ .keypad = &cm_t35_kp_data, @@ -505,6 +487,7 @@ static struct twl4030_platform_data cm_t35_twldata = { .vmmc1 = &cm_t35_vmmc1, .vsim = &cm_t35_vsim, .vio = &cm_t35_vio, + .power = &cm_t35_power_data, }; static void __init cm_t35_init_i2c(void) diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index a2010f07de31..b063f0d2faa6 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -47,7 +47,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -118,19 +118,6 @@ static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) gpio_set_value_cansleep(dssdev->reset_gpio, 0); } -static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 1); - return 0; -} - -static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 0); -} - static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -154,15 +141,14 @@ static struct omap_dss_device devkit8000_lcd_device = { .phy.dpi.data_lines = 24, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = devkit8000_panel_enable_dvi, - .platform_disable = devkit8000_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = -1, }; static struct omap_dss_device devkit8000_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -244,13 +230,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, } /* gpio + 7 is "DVI_PD" (out, active low) */ - devkit8000_dvi_device.reset_gpio = gpio + 7; - ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "DVI PowerDown"); - if (ret < 0) { - devkit8000_dvi_device.reset_gpio = -EINVAL; - printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); - } + dvi_panel.power_down_gpio = gpio + 7; return 0; } diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 0349fd2b68d8..70a81f900bb5 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -87,7 +87,7 @@ static struct omap_onenand_platform_data board_onenand_data = { .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ }; -static void +void __init board_onenand_init(struct mtd_partition *onenand_parts, u8 nr_parts, u8 cs) { @@ -98,7 +98,7 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, gpmc_onenand_init(&board_onenand_data); } #else -static void +void __init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) { } diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index d25503a98417..c44b70d52021 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -47,3 +47,14 @@ static inline void board_nand_init(struct mtd_partition *nand_parts, { } #endif + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) +extern void board_onenand_init(struct mtd_partition *nand_parts, + u8 nr_parts, u8 cs); +#else +static inline void board_onenand_init(struct mtd_partition *nand_parts, + u8 nr_parts, u8 cs) +{ +} +#endif diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 098d183a0086..7302ba7ff1b9 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -15,7 +15,6 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/irqdomain.h> -#include <linux/i2c/twl.h> #include <mach/hardware.h> #include <asm/hardware/gic.h> @@ -95,22 +94,6 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP3 -static struct twl4030_platform_data beagle_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, -}; - -static void __init omap3_i2c_init(void) -{ - omap3_pmic_init("twl4030", &beagle_twldata); -} - -static void __init omap3_init(void) -{ - omap3_i2c_init(); - omap_generic_init(); -} - static const char *omap3_boards_compat[] __initdata = { "ti,omap3", NULL, @@ -122,7 +105,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_early = omap3430_init_early, .init_irq = omap_init_irq, .handle_irq = omap3_intc_handle_irq, - .init_machine = omap3_init, + .init_machine = omap_generic_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, .restart = omap_prcm_restart, @@ -130,22 +113,6 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP4 -static struct twl4030_platform_data sdp4430_twldata = { - .irq_base = TWL6030_IRQ_BASE, - .irq_end = TWL6030_IRQ_END, -}; - -static void __init omap4_i2c_init(void) -{ - omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); -} - -static void __init omap4_init(void) -{ - omap4_i2c_init(); - omap_generic_init(); -} - static const char *omap4_boards_compat[] __initdata = { "ti,omap4", NULL, @@ -157,7 +124,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .init_early = omap4430_init_early, .init_irq = omap_init_irq, .handle_irq = gic_handle_irq, - .init_machine = omap4_init, + .init_machine = omap_generic_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, .restart = omap_prcm_restart, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 8f67861405bc..7a274098f67b 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -24,6 +24,8 @@ #include <linux/i2c/twl.h> #include <linux/mmc/host.h> +#include <linux/mtd/nand.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -32,13 +34,15 @@ #include <plat/gpmc.h> #include <plat/usb.h> #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/onenand.h> #include "mux.h" #include "hsmmc.h" #include "sdram-numonyx-m65kxxxxam.h" #include "common-board-devices.h" +#include "board-flash.h" +#include "control.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -60,6 +64,10 @@ #define IGEP3_GPIO_LED1_RED 16 #define IGEP3_GPIO_USBH_NRESET 183 +#define IGEP_SYSBOOT_MASK 0x1f +#define IGEP_SYSBOOT_NAND 0x0f +#define IGEP_SYSBOOT_ONENAND 0x10 + /* * IGEP2 Hardware Revision Table * @@ -110,8 +118,10 @@ static void __init igep2_get_revision(void) gpio_free(IGEP2_GPIO_LED1_RED); } -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) || \ + defined(CONFIG_MTD_NAND_OMAP2) || \ + defined(CONFIG_MTD_NAND_OMAP2_MODULE) #define ONENAND_MAP 0x20000000 @@ -123,7 +133,7 @@ static void __init igep2_get_revision(void) * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) */ -static struct mtd_partition igep_onenand_partitions[] = { +static struct mtd_partition igep_flash_partitions[] = { { .name = "X-Loader", .offset = 0, @@ -151,50 +161,28 @@ static struct mtd_partition igep_onenand_partitions[] = { }, }; -static struct omap_onenand_platform_data igep_onenand_data = { - .parts = igep_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep_onenand_partitions), - .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ -}; - -static struct platform_device igep_onenand_device = { - .name = "omap2-onenand", - .id = -1, - .dev = { - .platform_data = &igep_onenand_data, - }, -}; +static inline u32 igep_get_sysboot_value(void) +{ + return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK; +} static void __init igep_flash_init(void) { - u8 cs = 0; - u8 onenandcs = GPMC_CS_NUM + 1; - - for (cs = 0; cs < GPMC_CS_NUM; cs++) { - u32 ret; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* Check if NAND/oneNAND is configured */ - if ((ret & 0xC00) == 0x800) - /* NAND found */ - pr_err("IGEP: Unsupported NAND found\n"); - else { - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - if ((ret & 0x3F) == (ONENAND_MAP >> 24)) - /* ONENAND found */ - onenandcs = cs; - } - } - - if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP: Unable to find configuration in GPMC\n"); - return; + u32 mux; + mux = igep_get_sysboot_value(); + + if (mux == IGEP_SYSBOOT_NAND) { + pr_info("IGEP: initializing NAND memory device\n"); + board_nand_init(igep_flash_partitions, + ARRAY_SIZE(igep_flash_partitions), + 0, NAND_BUSWIDTH_16); + } else if (mux == IGEP_SYSBOOT_ONENAND) { + pr_info("IGEP: initializing OneNAND memory device\n"); + board_onenand_init(igep_flash_partitions, + ARRAY_SIZE(igep_flash_partitions), 0); + } else { + pr_err("IGEP: Flash: unsupported sysboot sequence found\n"); } - - igep_onenand_data.cs = onenandcs; - - if (platform_device_register(&igep_onenand_device) < 0) - pr_err("IGEP: Unable to register OneNAND device\n"); } #else @@ -444,28 +432,15 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .setup = igep_twl_gpio_setup, }; -static int igep2_enable_dvi(struct omap_dss_device *dssdev) -{ - gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1); - - return 0; -} - -static void igep2_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0); -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = igep2_enable_dvi, - .platform_disable = igep2_disable_dvi, - .i2c_bus_num = 3, +static struct tfp410_platform_data dvi_panel = { + .i2c_bus_num = 3, + .power_down_gpio = IGEP2_GPIO_DVI_PUP, }; static struct omap_dss_device igep2_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -480,14 +455,6 @@ static struct omap_dss_board_info igep2_dss_data = { .default_device = &igep2_dvi_device, }; -static void __init igep2_display_init(void) -{ - int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, - "GPIO_DVI_PUP"); - if (err) - pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); -} - static struct platform_device *igep_devices[] __initdata = { &igep_vwlan_device, }; @@ -641,7 +608,7 @@ static struct regulator_consumer_supply dummy_supplies[] = { static void __init igep_init(void) { - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ @@ -668,7 +635,6 @@ static void __init igep_init(void) if (machine_is_igep0020()) { omap_display_init(&igep2_dss_data); - igep2_display_init(); igep2_init_smsc911x(); usbhs_init(&igep2_usbhs_bdata); } else { diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7be8d659d91d..2a7b9a9da1db 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -42,7 +42,7 @@ #include <plat/board.h> #include "common.h" #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -83,11 +83,13 @@ static struct { int usb_pwr_level; int reset_gpio; int usr_button_gpio; + int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, .reset_gpio = 129, .usr_button_gpio = 4, + .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; static struct gpio omap3_beagle_rev_gpios[] __initdata = { @@ -145,10 +147,12 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; case 2: printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC; + beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; default: printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); @@ -189,33 +193,17 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { /* DSS */ -static int beagle_enable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value(dssdev->reset_gpio, 1); - - return 0; -} - -static void beagle_disable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value(dssdev->reset_gpio, 0); -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = beagle_enable_dvi, - .platform_disable = beagle_disable_dvi, +static struct tfp410_platform_data dvi_panel = { .i2c_bus_num = 3, + .power_down_gpio = -1, }; static struct omap_dss_device beagle_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, - .reset_gpio = -EINVAL, }; static struct omap_dss_device beagle_tv_device = { @@ -236,22 +224,12 @@ static struct omap_dss_board_info beagle_dss_data = { .default_device = &beagle_dvi_device, }; -static void __init beagle_display_init(void) -{ - int r; - - r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW, - "DVI reset"); - if (r < 0) - printk(KERN_ERR "Unable to get DVI reset GPIO\n"); -} - #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .caps = MMC_CAP_4_BIT_DATA, .gpio_wp = -EINVAL, .deferred = true, }, @@ -309,7 +287,7 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - beagle_dvi_device.reset_gpio = beagle_config.reset_gpio; + dvi_panel.power_down_gpio = beagle_config.reset_gpio; gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); @@ -523,6 +501,7 @@ static void __init omap3_beagle_init(void) if (beagle_config.mmc1_gpio_wp != -EINVAL) omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); + mmc[0].caps = beagle_config.mmc_caps; omap_hsmmc_init(mmc); omap3_beagle_i2c_init(); @@ -552,7 +531,6 @@ static void __init omap3_beagle_init(void) omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - beagle_display_init(); beagle_opp_init(); } diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 49df12735b41..ace3c675e9c2 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -46,7 +46,7 @@ #include "common.h" #include <plat/mcspi.h> #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -219,35 +219,14 @@ static struct omap_dss_device omap3_evm_tv_device = { .platform_disable = omap3_evm_disable_tv, }; -static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - - gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1); - - dvi_enabled = 1; - return 0; -} - -static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0); - - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = omap3_evm_enable_dvi, - .platform_disable = omap3_evm_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, }; static struct omap_dss_device omap3_evm_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -630,13 +609,13 @@ static struct regulator_consumer_supply dummy_supplies[] = { static void __init omap3_evm_init(void) { + struct omap_board_mux *obm; + omap3_evm_get_revision(); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - if (cpu_is_omap3630()) - omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB); - else - omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB); + obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux; + omap3_mux_init(obm, OMAP_PACKAGE_CBB); omap_board_config = omap3_evm_config; omap_board_config_size = ARRAY_SIZE(omap3_evm_config); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 9b3c141ff51b..c008bf8e1c36 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -4,8 +4,9 @@ * Copyright (C) 2010 Li-Pro.Net * Stephan Linz <linz@li-pro.net> * - * Copyright (C) 2010 Logic Product Development, Inc. + * Copyright (C) 2010-2012 Logic Product Development, Inc. * Peter Barada <peter.barada@logicpd.com> + * Ashwin BIhari <ashwin.bihari@logicpd.com> * * Modified from Beagle, EVM, and RX51 * @@ -45,6 +46,7 @@ #include <plat/gpmc-smsc911x.h> #include <plat/gpmc.h> #include <plat/sdrc.h> +#include <plat/usb.h> #define OMAP3LOGIC_SMSC911X_CS 1 @@ -85,6 +87,11 @@ static struct twl4030_gpio_platform_data omap3logic_gpio_data = { | BIT(13) | BIT(15) | BIT(16) | BIT(17), }; +static struct twl4030_usb_data omap3logic_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + + static struct twl4030_platform_data omap3logic_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -92,6 +99,7 @@ static struct twl4030_platform_data omap3logic_twldata = { /* platform_data for children goes here */ .gpio = &omap3logic_gpio_data, .vmmc1 = &omap3logic_vmmc1, + .usb = &omap3logic_usb_data, }; static int __init omap3logic_i2c_init(void) @@ -185,6 +193,20 @@ static inline void __init board_smsc911x_init(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* mUSB */ + OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -205,6 +227,8 @@ static void __init omap3logic_init(void) board_mmc_init(); board_smsc911x_init(); + usb_musb_init(NULL); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 4dffc95bddd2..4396bae91677 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -42,7 +42,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -92,9 +92,6 @@ static inline void __init omap3stalker_init_eth(void) #define LCD_PANEL_BKLIGHT_GPIO 210 #define ENABLE_VPLL2_DEV_GRP 0xE0 -static int lcd_enabled; -static int dvi_enabled; - static void __init omap3_stalker_display_init(void) { return; @@ -122,32 +119,14 @@ static struct omap_dss_device omap3_stalker_tv_device = { .platform_disable = omap3_stalker_disable_tv, }; -static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - gpio_set_value(DSS_ENABLE_GPIO, 1); - dvi_enabled = 1; - return 0; -} - -static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(DSS_ENABLE_GPIO, 0); - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = omap3_stalker_enable_dvi, - .platform_disable = omap3_stalker_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = DSS_ENABLE_GPIO, }; static struct omap_dss_device omap3_stalker_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d53b07345f0b..68b8fc9ff010 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -28,6 +28,7 @@ #include <linux/mfd/twl6040.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> +#include <linux/ti_wilink_st.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -42,7 +43,7 @@ #include "common.h" #include <plat/usb.h> #include <plat/mmc.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include "hsmmc.h" #include "control.h" @@ -58,12 +59,21 @@ #define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ -static int wl1271_gpios[] = {46, -1, -1}; +static struct ti_st_plat_data wilink_platform_data = { + .nshutdown_gpio = 46, + .dev_name = "/dev/ttyO1", + .flow_cntrl = 1, + .baud_rate = 3000000, + .chip_enable = NULL, + .suspend = NULL, + .resume = NULL, +}; + static struct platform_device wl1271_device = { .name = "kim", .id = -1, .dev = { - .platform_data = &wl1271_gpios, + .platform_data = &wilink_platform_data, }, }; @@ -117,6 +127,11 @@ static struct platform_device panda_abe_audio = { }, }; +static struct platform_device panda_hdmi_audio_codec = { + .name = "hdmi-audio-codec", + .id = -1, +}; + static struct platform_device btwilink_device = { .name = "btwilink", .id = -1, @@ -126,6 +141,7 @@ static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, &panda_abe_audio, + &panda_hdmi_audio_codec, &btwilink_device, }; @@ -274,7 +290,9 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VANA | TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | - TWL_COMMON_REGULATOR_CLK32KG); + TWL_COMMON_REGULATOR_CLK32KG | + TWL_COMMON_REGULATOR_V1V8 | + TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &omap4_panda_twldata, &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); @@ -371,47 +389,22 @@ static struct omap_board_mux board_mux[] __initdata = { /* Display DVI */ #define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 -static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 1); - return 0; -} - -static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 0); -} - /* Using generic display panel */ -static struct panel_dvi_platform_data omap4_dvi_panel = { - .platform_enable = omap4_panda_enable_dvi, - .platform_disable = omap4_panda_disable_dvi, - .i2c_bus_num = 3, +static struct tfp410_platform_data omap4_dvi_panel = { + .i2c_bus_num = 3, + .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, }; static struct omap_dss_device omap4_panda_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &omap4_dvi_panel, .phy.dpi.data_lines = 24, .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, .channel = OMAP_DSS_CHANNEL_LCD2, }; -static int __init omap4_panda_dvi_init(void) -{ - int r; - - /* Requesting TFP410 DVI GPIO and disabling it, at bootup */ - r = gpio_request_one(omap4_panda_dvi_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "DVI PD"); - if (r) - pr_err("Failed to get DVI powerdown GPIO\n"); - - return r; -} - static struct gpio panda_hdmi_gpios[] = { { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, @@ -462,11 +455,6 @@ static struct omap_dss_board_info omap4_panda_dss_data = { static void __init omap4_panda_display_init(void) { - int r; - - r = omap4_panda_dvi_init(); - if (r) - pr_err("error initializing panda DVI\n"); omap_display_init(&omap4_panda_dss_data); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 33aa3910b09e..5527c1979a16 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -46,7 +46,7 @@ #include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> @@ -167,32 +167,15 @@ static void __init overo_display_init(void) gpio_export(OVERO_GPIO_LCD_BL, 0); } -static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - dvi_enabled = 1; - - return 0; -} - -static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = overo_panel_enable_dvi, - .platform_disable = overo_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { .i2c_bus_num = 3, + .power_down_gpio = -1, }; static struct omap_dss_device overo_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index d87ee0612098..ff53deccecab 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -44,6 +44,7 @@ #include <linux/leds-lp5523.h> #include <../drivers/staging/iio/light/tsl2563.h> +#include <linux/lis3lv02d.h> #include "mux.h" #include "hsmmc.h" @@ -63,6 +64,9 @@ #define RX51_TSC2005_RESET_GPIO 104 #define RX51_TSC2005_IRQ_GPIO 100 +#define LIS302_IRQ1_GPIO 181 +#define LIS302_IRQ2_GPIO 180 /* Not yet in use */ + /* list all spi devices here */ enum { RX51_SPI_WL1251, @@ -73,6 +77,77 @@ enum { static struct wl12xx_platform_data wl1251_pdata; static struct tsc2005_platform_data tsc2005_pdata; +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) +static int lis302_setup(void) +{ + int err; + int irq1 = LIS302_IRQ1_GPIO; + int irq2 = LIS302_IRQ2_GPIO; + + /* gpio for interrupt pin 1 */ + err = gpio_request(irq1, "lis3lv02dl_irq1"); + if (err) { + printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); + goto out; + } + + /* gpio for interrupt pin 2 */ + err = gpio_request(irq2, "lis3lv02dl_irq2"); + if (err) { + gpio_free(irq1); + printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); + goto out; + } + + gpio_direction_input(irq1); + gpio_direction_input(irq2); + +out: + return err; +} + +static int lis302_release(void) +{ + gpio_free(LIS302_IRQ1_GPIO); + gpio_free(LIS302_IRQ2_GPIO); + + return 0; +} + +static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { + .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | + LIS3_CLICK_SINGLE_Z, + /* Limits are 0.5g * value */ + .click_thresh_x = 8, + .click_thresh_y = 8, + .click_thresh_z = 10, + /* Click must be longer than time limit */ + .click_time_limit = 9, + /* Kind of debounce filter */ + .click_latency = 50, + + /* Limits for all axis. millig-value / 18 to get HW values */ + .wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI, + .wakeup_thresh = 800 / 18, + .wakeup_flags2 = LIS3_WAKEUP_Z_HI , + .wakeup_thresh2 = 900 / 18, + + .hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE, + + /* Interrupt line 2 for click detection, line 1 for thresholds */ + .irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12, + + .axis_x = LIS3_DEV_X, + .axis_y = LIS3_INV_DEV_Y, + .axis_z = LIS3_INV_DEV_Z, + .setup_resources = lis302_setup, + .release_resources = lis302_release, + .st_min_limits = {-32, 3, 3}, + .st_max_limits = {-3, 32, 32}, + .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO), +}; +#endif + #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) static struct tsl2563_platform_data rx51_tsl2563_platform_data = { .cover_comp_gain = 16, @@ -872,11 +947,11 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = { .resource_config = twl4030_rconfig, }; -struct twl4030_vibra_data rx51_vibra_data __initdata = { +static struct twl4030_vibra_data rx51_vibra_data __initdata = { .coexist = 0, }; -struct twl4030_audio_data rx51_audio_data __initdata = { +static struct twl4030_audio_data rx51_audio_data __initdata = { .audio_mclk = 26000000, .vibra = &rx51_vibra_data, }; @@ -950,6 +1025,16 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { } }; +static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + { + I2C_BOARD_INFO("lis3lv02d", 0x1d), + .platform_data = &rx51_lis3lv02d_data, + .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO), + }, +#endif +}; + static int __init rx51_i2c_init(void) { if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || @@ -971,7 +1056,8 @@ static int __init rx51_i2c_init(void) omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); - omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, + ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); return 0; } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 27f01f051dff..2da92a6ba40a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -59,25 +59,24 @@ static struct platform_device leds_gpio = { }; /* - * cpuidle C-states definition override from the default values. - * The 'exit_latency' field is the sum of sleep and wake-up latencies. - */ -static struct cpuidle_params rx51_cpuidle_params[] = { - /* C1 */ - {110 + 162, 5 , 1}, - /* C2 */ - {106 + 180, 309, 1}, - /* C3 */ - {107 + 410, 46057, 0}, - /* C4 */ - {121 + 3374, 46057, 0}, - /* C5 */ - {855 + 1146, 46057, 1}, - /* C6 */ - {7580 + 4134, 484329, 0}, - /* C7 */ - {7505 + 15274, 484329, 1}, -}; + * cpuidle C-states definition for rx51. + * + * The 'exit_latency' field is the sum of sleep + * and wake-up latencies. + + --------------------------------------------- + | state | exit_latency | target_residency | + --------------------------------------------- + | C1 | 110 + 162 | 5 | + | C2 | 106 + 180 | 309 | + | C3 | 107 + 410 | 46057 | + | C4 | 121 + 3374 | 46057 | + | C5 | 855 + 1146 | 46057 | + | C6 | 7580 + 4134 | 484329 | + | C7 | 7505 + 15274 | 484329 | + --------------------------------------------- + +*/ extern void __init rx51_peripherals_init(void); @@ -98,7 +97,6 @@ static void __init rx51_init(void) struct omap_sdrc_params *sdrc_params; omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap3_pm_init_cpuidle(rx51_cpuidle_params); omap_serial_init(); sdrc_params = nokia_get_sdram_timings(); diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index a43a765dd092..28187f134fff 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -16,6 +16,7 @@ #include <linux/spi/spi.h> #include <plat/mcspi.h> #include <video/omapdss.h> +#include <mach/board-zoom.h> #define LCD_PANEL_RESET_GPIO_PROD 96 #define LCD_PANEL_RESET_GPIO_PILOT 55 diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index ec22c24f4e81..4cb1fe666311 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -136,8 +136,6 @@ void omap4_map_io(void); void ti81xx_map_io(void); void omap_barriers_init(void); -extern void __init omap_init_consistent_dma_size(void); - /** * omap_test_timeout - busy-loop, testing a condition * @cond: condition to test until it evaluates to true diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 535866489ce3..207bc1c7759f 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -38,40 +38,44 @@ #ifdef CONFIG_CPU_IDLE -/* - * The latencies/thresholds for various C states have - * to be configured from the respective board files. - * These are some default values (which might not provide - * the best power savings) used on boards which do not - * pass these details from the board file. - */ -static struct cpuidle_params cpuidle_params_table[] = { - /* C1 */ - {2 + 2, 5, 1}, - /* C2 */ - {10 + 10, 30, 1}, - /* C3 */ - {50 + 50, 300, 1}, - /* C4 */ - {1500 + 1800, 4000, 1}, - /* C5 */ - {2500 + 7500, 12000, 1}, - /* C6 */ - {3000 + 8500, 15000, 1}, - /* C7 */ - {10000 + 30000, 300000, 1}, -}; -#define OMAP3_NUM_STATES ARRAY_SIZE(cpuidle_params_table) - /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { u32 mpu_state; u32 core_state; - u8 valid; }; -struct omap3_idle_statedata omap3_idle_data[OMAP3_NUM_STATES]; -struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; +static struct omap3_idle_statedata omap3_idle_data[] = { + { + .mpu_state = PWRDM_POWER_ON, + .core_state = PWRDM_POWER_ON, + }, + { + .mpu_state = PWRDM_POWER_ON, + .core_state = PWRDM_POWER_ON, + }, + { + .mpu_state = PWRDM_POWER_RET, + .core_state = PWRDM_POWER_ON, + }, + { + .mpu_state = PWRDM_POWER_OFF, + .core_state = PWRDM_POWER_ON, + }, + { + .mpu_state = PWRDM_POWER_RET, + .core_state = PWRDM_POWER_RET, + }, + { + .mpu_state = PWRDM_POWER_OFF, + .core_state = PWRDM_POWER_RET, + }, + { + .mpu_state = PWRDM_POWER_OFF, + .core_state = PWRDM_POWER_OFF, + }, +}; + +static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; static int _cpuidle_allow_idle(struct powerdomain *pwrdm, struct clockdomain *clkdm) @@ -91,8 +95,7 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct omap3_idle_statedata *cx = - cpuidle_get_statedata(&dev->states_usage[index]); + struct omap3_idle_statedata *cx = &omap3_idle_data[index]; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; local_fiq_disable(); @@ -169,14 +172,12 @@ static inline int omap3_enter_idle(struct cpuidle_device *dev, * if it satisfies the enable_off_mode condition. */ static int next_valid_state(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) + struct cpuidle_driver *drv, int index) { - struct cpuidle_state_usage *curr_usage = &dev->states_usage[index]; - struct cpuidle_state *curr = &drv->states[index]; - struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr_usage); + struct omap3_idle_statedata *cx = &omap3_idle_data[index]; u32 mpu_deepest_state = PWRDM_POWER_RET; u32 core_deepest_state = PWRDM_POWER_RET; + int idx; int next_index = -1; if (enable_off_mode) { @@ -191,45 +192,29 @@ static int next_valid_state(struct cpuidle_device *dev, } /* Check if current state is valid */ - if ((cx->valid) && - (cx->mpu_state >= mpu_deepest_state) && - (cx->core_state >= core_deepest_state)) { + if ((cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) return index; - } else { - int idx = OMAP3_NUM_STATES - 1; - - /* Reach the current state starting at highest C-state */ - for (; idx >= 0; idx--) { - if (&drv->states[idx] == curr) { - next_index = idx; - break; - } - } - - /* Should never hit this condition */ - WARN_ON(next_index == -1); - /* - * Drop to next valid state. - * Start search from the next (lower) state. - */ - idx--; - for (; idx >= 0; idx--) { - cx = cpuidle_get_statedata(&dev->states_usage[idx]); - if ((cx->valid) && - (cx->mpu_state >= mpu_deepest_state) && - (cx->core_state >= core_deepest_state)) { - next_index = idx; - break; - } + /* + * Drop to next valid state. + * Start search from the next (lower) state. + */ + for (idx = index - 1; idx >= 0; idx--) { + cx = &omap3_idle_data[idx]; + if ((cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) { + next_index = idx; + break; } - /* - * C1 is always valid. - * So, no need to check for 'next_index == -1' outside - * this loop. - */ } + /* + * C1 is always valid. + * So, no need to check for 'next_index == -1' outside + * this loop. + */ + return next_index; } @@ -273,7 +258,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, * Prevent PER off if CORE is not in retention or off as this * would disable PER wakeups completely. */ - cx = cpuidle_get_statedata(&dev->states_usage[index]); + cx = &omap3_idle_data[index]; core_next_state = cx->core_state; per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); if ((per_next_state == PWRDM_POWER_OFF) && @@ -298,57 +283,71 @@ select_state: DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); -void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) -{ - int i; - - if (!cpuidle_board_params) - return; - - for (i = 0; i < OMAP3_NUM_STATES; i++) { - cpuidle_params_table[i].valid = cpuidle_board_params[i].valid; - cpuidle_params_table[i].exit_latency = - cpuidle_board_params[i].exit_latency; - cpuidle_params_table[i].target_residency = - cpuidle_board_params[i].target_residency; - } - return; -} - struct cpuidle_driver omap3_idle_driver = { .name = "omap3_idle", .owner = THIS_MODULE, + .states = { + { + .enter = omap3_enter_idle, + .exit_latency = 2 + 2, + .target_residency = 5, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C1", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 10 + 10, + .target_residency = 30, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C2", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 50 + 50, + .target_residency = 300, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C3", + .desc = "MPU RET + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 1500 + 1800, + .target_residency = 4000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C4", + .desc = "MPU OFF + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 2500 + 7500, + .target_residency = 12000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C5", + .desc = "MPU RET + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 3000 + 8500, + .target_residency = 15000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C6", + .desc = "MPU OFF + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 10000 + 30000, + .target_residency = 30000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C7", + .desc = "MPU OFF + CORE OFF", + }, + }, + .state_count = ARRAY_SIZE(omap3_idle_data), + .safe_state_index = 0, }; -/* Helper to fill the C-state common data*/ -static inline void _fill_cstate(struct cpuidle_driver *drv, - int idx, const char *descr) -{ - struct cpuidle_state *state = &drv->states[idx]; - - state->exit_latency = cpuidle_params_table[idx].exit_latency; - state->target_residency = cpuidle_params_table[idx].target_residency; - state->flags = CPUIDLE_FLAG_TIME_VALID; - state->enter = omap3_enter_idle_bm; - sprintf(state->name, "C%d", idx + 1); - strncpy(state->desc, descr, CPUIDLE_DESC_LEN); - -} - -/* Helper to register the driver_data */ -static inline struct omap3_idle_statedata *_fill_cstate_usage( - struct cpuidle_device *dev, - int idx) -{ - struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; - struct cpuidle_state_usage *state_usage = &dev->states_usage[idx]; - - cx->valid = cpuidle_params_table[idx].valid; - cpuidle_set_statedata(state_usage, cx); - - return cx; -} - /** * omap3_idle_init - Init routine for OMAP3 idle * @@ -358,77 +357,20 @@ static inline struct omap3_idle_statedata *_fill_cstate_usage( int __init omap3_idle_init(void) { struct cpuidle_device *dev; - struct cpuidle_driver *drv = &omap3_idle_driver; - struct omap3_idle_statedata *cx; mpu_pd = pwrdm_lookup("mpu_pwrdm"); core_pd = pwrdm_lookup("core_pwrdm"); per_pd = pwrdm_lookup("per_pwrdm"); cam_pd = pwrdm_lookup("cam_pwrdm"); + if (!mpu_pd || !core_pd || !per_pd || !cam_pd) + return -ENODEV; - drv->safe_state_index = -1; - dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - - /* C1 . MPU WFI + Core active */ - _fill_cstate(drv, 0, "MPU ON + CORE ON"); - (&drv->states[0])->enter = omap3_enter_idle; - drv->safe_state_index = 0; - cx = _fill_cstate_usage(dev, 0); - cx->valid = 1; /* C1 is always valid */ - cx->mpu_state = PWRDM_POWER_ON; - cx->core_state = PWRDM_POWER_ON; - - /* C2 . MPU WFI + Core inactive */ - _fill_cstate(drv, 1, "MPU ON + CORE ON"); - cx = _fill_cstate_usage(dev, 1); - cx->mpu_state = PWRDM_POWER_ON; - cx->core_state = PWRDM_POWER_ON; - - /* C3 . MPU CSWR + Core inactive */ - _fill_cstate(drv, 2, "MPU RET + CORE ON"); - cx = _fill_cstate_usage(dev, 2); - cx->mpu_state = PWRDM_POWER_RET; - cx->core_state = PWRDM_POWER_ON; - - /* C4 . MPU OFF + Core inactive */ - _fill_cstate(drv, 3, "MPU OFF + CORE ON"); - cx = _fill_cstate_usage(dev, 3); - cx->mpu_state = PWRDM_POWER_OFF; - cx->core_state = PWRDM_POWER_ON; - - /* C5 . MPU RET + Core RET */ - _fill_cstate(drv, 4, "MPU RET + CORE RET"); - cx = _fill_cstate_usage(dev, 4); - cx->mpu_state = PWRDM_POWER_RET; - cx->core_state = PWRDM_POWER_RET; - - /* C6 . MPU OFF + Core RET */ - _fill_cstate(drv, 5, "MPU OFF + CORE RET"); - cx = _fill_cstate_usage(dev, 5); - cx->mpu_state = PWRDM_POWER_OFF; - cx->core_state = PWRDM_POWER_RET; - - /* C7 . MPU OFF + Core OFF */ - _fill_cstate(drv, 6, "MPU OFF + CORE OFF"); - cx = _fill_cstate_usage(dev, 6); - /* - * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot - * enable OFF mode in a stable form for previous revisions. - * We disable C7 state as a result. - */ - if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) { - cx->valid = 0; - pr_warn("%s: core off state C7 disabled due to i583\n", - __func__); - } - cx->mpu_state = PWRDM_POWER_OFF; - cx->core_state = PWRDM_POWER_OFF; - - drv->state_count = OMAP3_NUM_STATES; cpuidle_register_driver(&omap3_idle_driver); - dev->state_count = OMAP3_NUM_STATES; + dev = &per_cpu(omap3_idle_dev, smp_processor_id()); + dev->cpu = 0; + if (cpuidle_register_device(dev)) { printk(KERN_ERR "%s: CPUidle register device failed\n", __func__); diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index f386cbe9c889..be1617ca84bd 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -24,26 +24,31 @@ #ifdef CONFIG_CPU_IDLE -/* Machine specific information to be recorded in the C-state driver_data */ +/* Machine specific information */ struct omap4_idle_statedata { u32 cpu_state; u32 mpu_logic_state; u32 mpu_state; - u8 valid; }; -static struct cpuidle_params cpuidle_params_table[] = { - /* C1 - CPU0 ON + CPU1 ON + MPU ON */ - {.exit_latency = 2 + 2 , .target_residency = 5, .valid = 1}, - /* C2- CPU0 OFF + CPU1 OFF + MPU CSWR */ - {.exit_latency = 328 + 440 , .target_residency = 960, .valid = 1}, - /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ - {.exit_latency = 460 + 518 , .target_residency = 1100, .valid = 1}, +static struct omap4_idle_statedata omap4_idle_data[] = { + { + .cpu_state = PWRDM_POWER_ON, + .mpu_state = PWRDM_POWER_ON, + .mpu_logic_state = PWRDM_POWER_RET, + }, + { + .cpu_state = PWRDM_POWER_OFF, + .mpu_state = PWRDM_POWER_RET, + .mpu_logic_state = PWRDM_POWER_RET, + }, + { + .cpu_state = PWRDM_POWER_OFF, + .mpu_state = PWRDM_POWER_RET, + .mpu_logic_state = PWRDM_POWER_OFF, + }, }; -#define OMAP4_NUM_STATES ARRAY_SIZE(cpuidle_params_table) - -struct omap4_idle_statedata omap4_idle_data[OMAP4_NUM_STATES]; static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd; /** @@ -60,8 +65,7 @@ static int omap4_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct omap4_idle_statedata *cx = - cpuidle_get_statedata(&dev->states_usage[index]); + struct omap4_idle_statedata *cx = &omap4_idle_data[index]; u32 cpu1_state; int cpu_id = smp_processor_id(); @@ -78,7 +82,7 @@ static int omap4_enter_idle(struct cpuidle_device *dev, cpu1_state = pwrdm_read_pwrst(cpu1_pd); if (cpu1_state != PWRDM_POWER_OFF) { index = drv->safe_state_index; - cx = cpuidle_get_statedata(&dev->states_usage[index]); + cx = &omap4_idle_data[index]; } if (index > 0) @@ -133,36 +137,39 @@ struct cpuidle_driver omap4_idle_driver = { .name = "omap4_idle", .owner = THIS_MODULE, .en_core_tk_irqen = 1, + .states = { + { + /* C1 - CPU0 ON + CPU1 ON + MPU ON */ + .exit_latency = 2 + 2, + .target_residency = 5, + .flags = CPUIDLE_FLAG_TIME_VALID, + .enter = omap4_enter_idle, + .name = "C1", + .desc = "MPUSS ON" + }, + { + /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ + .exit_latency = 328 + 440, + .target_residency = 960, + .flags = CPUIDLE_FLAG_TIME_VALID, + .enter = omap4_enter_idle, + .name = "C2", + .desc = "MPUSS CSWR", + }, + { + /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ + .exit_latency = 460 + 518, + .target_residency = 1100, + .flags = CPUIDLE_FLAG_TIME_VALID, + .enter = omap4_enter_idle, + .name = "C3", + .desc = "MPUSS OSWR", + }, + }, + .state_count = ARRAY_SIZE(omap4_idle_data), + .safe_state_index = 0, }; -static inline void _fill_cstate(struct cpuidle_driver *drv, - int idx, const char *descr) -{ - struct cpuidle_state *state = &drv->states[idx]; - - state->exit_latency = cpuidle_params_table[idx].exit_latency; - state->target_residency = cpuidle_params_table[idx].target_residency; - state->flags = CPUIDLE_FLAG_TIME_VALID; - state->enter = omap4_enter_idle; - sprintf(state->name, "C%d", idx + 1); - strncpy(state->desc, descr, CPUIDLE_DESC_LEN); -} - -static inline struct omap4_idle_statedata *_fill_cstate_usage( - struct cpuidle_device *dev, - int idx) -{ - struct omap4_idle_statedata *cx = &omap4_idle_data[idx]; - struct cpuidle_state_usage *state_usage = &dev->states_usage[idx]; - - cx->valid = cpuidle_params_table[idx].valid; - cpuidle_set_statedata(state_usage, cx); - - return cx; -} - - - /** * omap4_idle_init - Init routine for OMAP4 idle * @@ -171,9 +178,7 @@ static inline struct omap4_idle_statedata *_fill_cstate_usage( */ int __init omap4_idle_init(void) { - struct omap4_idle_statedata *cx; struct cpuidle_device *dev; - struct cpuidle_driver *drv = &omap4_idle_driver; unsigned int cpu_id = 0; mpu_pd = pwrdm_lookup("mpu_pwrdm"); @@ -182,42 +187,15 @@ int __init omap4_idle_init(void) if ((!mpu_pd) || (!cpu0_pd) || (!cpu1_pd)) return -ENODEV; - - drv->safe_state_index = -1; dev = &per_cpu(omap4_idle_dev, cpu_id); dev->cpu = cpu_id; - /* C1 - CPU0 ON + CPU1 ON + MPU ON */ - _fill_cstate(drv, 0, "MPUSS ON"); - drv->safe_state_index = 0; - cx = _fill_cstate_usage(dev, 0); - cx->valid = 1; /* C1 is always valid */ - cx->cpu_state = PWRDM_POWER_ON; - cx->mpu_state = PWRDM_POWER_ON; - cx->mpu_logic_state = PWRDM_POWER_RET; - - /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ - _fill_cstate(drv, 1, "MPUSS CSWR"); - cx = _fill_cstate_usage(dev, 1); - cx->cpu_state = PWRDM_POWER_OFF; - cx->mpu_state = PWRDM_POWER_RET; - cx->mpu_logic_state = PWRDM_POWER_RET; - - /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ - _fill_cstate(drv, 2, "MPUSS OSWR"); - cx = _fill_cstate_usage(dev, 2); - cx->cpu_state = PWRDM_POWER_OFF; - cx->mpu_state = PWRDM_POWER_RET; - cx->mpu_logic_state = PWRDM_POWER_OFF; - - drv->state_count = OMAP4_NUM_STATES; cpuidle_register_driver(&omap4_idle_driver); - dev->state_count = OMAP4_NUM_STATES; if (cpuidle_register_device(dev)) { pr_err("%s: CPUidle register device failed\n", __func__); - return -EIO; - } + return -EIO; + } return 0; } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 3318f67fef7a..7b4b9327e543 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -42,7 +42,6 @@ static int __init omap3_l3_init(void) { - int l; struct omap_hwmod *oh; struct platform_device *pdev; char oh_name[L3_MODULES_MAX_LEN]; @@ -54,7 +53,7 @@ static int __init omap3_l3_init(void) if (!(cpu_is_omap34xx())) return -ENODEV; - l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main"); + snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main"); oh = omap_hwmod_lookup(oh_name); @@ -72,7 +71,7 @@ postcore_initcall(omap3_l3_init); static int __init omap4_l3_init(void) { - int l, i; + int i; struct omap_hwmod *oh[3]; struct platform_device *pdev; char oh_name[L3_MODULES_MAX_LEN]; @@ -89,7 +88,7 @@ static int __init omap4_l3_init(void) return -ENODEV; for (i = 0; i < L3_MODULES; i++) { - l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1); + snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1); oh[i] = omap_hwmod_lookup(oh_name); if (!(oh[i])) @@ -355,6 +354,36 @@ static void __init omap_init_dmic(void) static inline void omap_init_dmic(void) {} #endif +#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \ + defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE) + +static struct platform_device omap_hdmi_audio = { + .name = "omap-hdmi-audio", + .id = -1, +}; + +static void __init omap_init_hdmi_audio(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + + oh = omap_hwmod_lookup("dss_hdmi"); + if (!oh) { + printk(KERN_ERR "Could not look up dss_hdmi hw_mod\n"); + return; + } + + pdev = omap_device_build("omap-hdmi-audio-dai", + -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), + "Can't build omap_device for omap-hdmi-audio-dai.\n"); + + platform_device_register(&omap_hdmi_audio); +} +#else +static inline void omap_init_hdmi_audio(void) {} +#endif + #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <plat/mcspi.h> @@ -714,11 +743,15 @@ static int __init omap2_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_audio(); - omap_init_mcpdm(); - omap_init_dmic(); omap_init_camera(); + omap_init_hdmi_audio(); omap_init_mbox(); - omap_init_mcspi(); + /* If dtb is there, the devices will be created dynamically */ + if (!of_have_populated_dt()) { + omap_init_dmic(); + omap_init_mcpdm(); + omap_init_mcspi(); + } omap_init_pmu(); omap_hdq_init(); omap_init_sti(); diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 2f994e5194e8..9ad7d489b0de 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -20,6 +20,7 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/interrupt.h> +#include <linux/of.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> @@ -55,10 +56,9 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr; pdata->bank_width = dev_attr->bank_width; pdata->dbck_flag = dev_attr->dbck_flag; - pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1); pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); - if (!pdata) { + if (!pdata->regs) { pr_err("gpio%d: Memory allocation failed\n", id); return -ENOMEM; } @@ -102,6 +102,8 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->regs->dataout = OMAP4_GPIO_DATAOUT; pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT; pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT; + pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0; + pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1; pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0; pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1; pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0; @@ -146,7 +148,10 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) */ static int __init omap2_gpio_init(void) { - return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, - NULL); + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + + return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL); } postcore_initcall(omap2_gpio_init); diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 385b3e02c4a6..a0fa9bb2bda5 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -176,7 +176,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, const int t_wpl = 40; const int t_wph = 30; int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; - int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; + int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0; int err, ticks_cez; int cs = cfg->cs, freq = *freq_ptr; @@ -240,7 +240,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, break; } - tick_ns = gpmc_ticks_to_ns(1); div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); gpmc_clk_ns = gpmc_ticks_to_ns(div); if (gpmc_clk_ns < 15) /* >66Mhz */ diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 212018d4e320..46b09dae770e 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -768,8 +768,7 @@ static int __init gpmc_init(void) irq++; } - ret = request_irq(gpmc_irq, - gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base); + ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL); if (ret) pr_err("gpmc: irq-%d could not claim: err %d\n", gpmc_irq, ret); diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c index 454dfce125ca..8763c8520dc2 100644 --- a/arch/arm/mach-omap2/hwspinlock.c +++ b/arch/arm/mach-omap2/hwspinlock.c @@ -28,7 +28,7 @@ static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = { .base_id = 0, }; -int __init hwspinlocks_init(void) +static int __init hwspinlocks_init(void) { int retval = 0; struct omap_hwmod *oh; diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h index 1e2d3322f33e..c88420de1151 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h @@ -941,10 +941,10 @@ #define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29) #define OMAP4_DSI1_LANEENABLE_SHIFT 24 #define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24) -#define OMAP4_DSI2_PIPD_SHIFT 19 -#define OMAP4_DSI2_PIPD_MASK (0x1f << 19) -#define OMAP4_DSI1_PIPD_SHIFT 14 -#define OMAP4_DSI1_PIPD_MASK (0x1f << 14) +#define OMAP4_DSI1_PIPD_SHIFT 19 +#define OMAP4_DSI1_PIPD_MASK (0x1f << 19) +#define OMAP4_DSI2_PIPD_SHIFT 14 +#define OMAP4_DSI2_PIPD_MASK (0x1f << 14) /* CONTROL_MCBSPLP */ #define OMAP4_ALBCTRLRX_FSX_SHIFT 31 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 86a16d34662c..e1f9c6fc0414 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -31,6 +31,7 @@ #include <plat/omap-pm.h> #include <plat/omap_hwmod.h> #include <plat/multi.h> +#include <plat/dma.h> #include "iomap.h" #include "voltage.h" diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 12949dd3c156..fdc4303be563 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -25,6 +25,7 @@ #include <mach/hardware.h> #include "iomap.h" +#include "common.h" /* selected INTC register offsets */ @@ -333,7 +334,7 @@ void omap_intc_restore_context(void) void omap3_intc_suspend(void) { /* A pending interrupt would prevent OMAP from entering suspend */ - omap_ack_irq(0); + omap_ack_irq(NULL); } void omap3_intc_prepare_idle(void) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 65c33911341f..3268ee24eada 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -247,7 +247,7 @@ int __init omap_mux_init_signal(const char *muxname, int val) int mux_mode; mux_mode = omap_mux_get_by_name(muxname, &partition, &mux); - if (mux_mode < 0) + if (mux_mode < 0 || !mux) return mux_mode; old_mode = omap_mux_read(partition, mux->reg_offset); diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index d8f8ef40290f..d9ae4a53d818 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -18,6 +18,7 @@ #include <asm/cacheflush.h> #include <asm/memblock.h> +#include <plat/omap-secure.h> #include <mach/omap-secure.h> static phys_addr_t omap_secure_memblock_base; diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 42cd7fb52414..d811c7790350 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -259,7 +259,7 @@ static void irq_save_context(void) /* * Clear WakeupGen SAR backup status. */ -void irq_sar_clear(void) +static void irq_sar_clear(void) { u32 val; val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 36fa90b6ece8..78564895e914 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -38,27 +38,6 @@ static inline int omap4_opp_init(void) } #endif -/* - * cpuidle mach specific parameters - * - * The board code can override the default C-states definition using - * omap3_pm_init_cpuidle - */ -struct cpuidle_params { - u32 exit_latency; /* exit_latency = sleep + wake-up latencies */ - u32 target_residency; - u8 valid; /* validates the C-state */ -}; - -#if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE) -extern void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params); -#else -static -inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) -{ -} -#endif - extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 95442b69ae27..facfffca9eac 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -171,8 +171,6 @@ static int omap2_allow_mpu_retention(void) static void omap2_enter_mpu_retention(void) { - int only_idle = 0; - /* Putting MPU into the WFI state while a transfer is active * seems to cause the I2C block to timeout. Why? Good question. */ if (omap2_i2c_active()) @@ -195,7 +193,6 @@ static void omap2_enter_mpu_retention(void) omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD, OMAP2_PM_PWSTCTRL); - only_idle = 1; } omap2_sram_idle(); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 703bd1099259..8b43aefba0ea 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -273,7 +273,7 @@ void omap_sram_idle(void) int per_next_state = PWRDM_POWER_ON; int core_next_state = PWRDM_POWER_ON; int per_going_off; - int core_prev_state, per_prev_state; + int core_prev_state; u32 sdrc_pwr = 0; mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); @@ -375,10 +375,8 @@ void omap_sram_idle(void) pwrdm_post_transition(); /* PER */ - if (per_next_state < PWRDM_POWER_ON) { - per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - } /* Disable IO-PAD and IO-CHAIN wakeup */ if (omap3_has_io_wakeup() && @@ -702,7 +700,7 @@ static void __init pm_errata_configure(void) static int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; - struct clockdomain *neon_clkdm, *per_clkdm, *mpu_clkdm, *core_clkdm; + struct clockdomain *neon_clkdm, *mpu_clkdm; int ret; if (!cpu_is_omap34xx()) @@ -757,8 +755,6 @@ static int __init omap3_pm_init(void) neon_clkdm = clkdm_lookup("neon_clkdm"); mpu_clkdm = clkdm_lookup("mpu_clkdm"); - per_clkdm = clkdm_lookup("per_clkdm"); - core_clkdm = clkdm_lookup("core_clkdm"); #ifdef CONFIG_SUSPEND omap_pm_suspend = omap3_pm_suspend; diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index d28f848897d6..dfe00ddb5c60 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -237,7 +237,7 @@ void omap_prcm_irq_complete(void) */ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) { - int nr_regs = irq_setup->nr_regs; + int nr_regs; u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG]; int offset, i; struct irq_chip_generic *gc; @@ -246,6 +246,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) if (!irq_setup) return -EINVAL; + nr_regs = irq_setup->nr_regs; + if (prcm_irq_setup) { pr_err("PRCM: already initialized; won't reinitialize\n"); return -EINVAL; diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 9fc2f44188cb..292d4aaca068 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -133,7 +133,7 @@ static void omap_serial_fill_default_pads(struct omap_board_data *bdata) static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} #endif -char *cmdline_find_option(char *str) +static char *cmdline_find_option(char *str) { extern char *saved_command_line; @@ -245,14 +245,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate; omap_up.autosuspend_timeout = info->autosuspend_timeout; - /* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */ - if (!cpu_is_omap2420() && !cpu_is_ti816x()) - omap_up.errata |= UART_ERRATA_i202_MDR1_ACCESS; - - /* Enable DMA Mode Force Idle Errata i291 for omap34xx/3630 */ - if (cpu_is_omap34xx() || cpu_is_omap3630()) - omap_up.errata |= UART_ERRATA_i291_DMA_FORCEIDLE; - pdata = &omap_up; pdata_size = sizeof(struct omap_uart_port_info); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 7a7b89304c48..119d5a910f3a 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -31,6 +31,7 @@ #include "twl-common.h" #include "pm.h" +#include "voltage.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -47,6 +48,18 @@ static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { }, }; +static int twl_set_voltage(void *data, int target_uV) +{ + struct voltagedomain *voltdm = (struct voltagedomain *)data; + return voltdm_scale(voltdm, target_uV); +} + +static int twl_get_voltage(void *data) +{ + struct voltagedomain *voltdm = (struct voltagedomain *)data; + return voltdm_get_voltage(voltdm); +} + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -153,6 +166,48 @@ static struct regulator_init_data omap3_vpll2_idata = { .consumer_supplies = omap3_vpll2_supplies, }; +static struct regulator_consumer_supply omap3_vdd1_supply[] = { + REGULATOR_SUPPLY("vcc", "mpu.0"), +}; + +static struct regulator_consumer_supply omap3_vdd2_supply[] = { + REGULATOR_SUPPLY("vcc", "l3_main.0"), +}; + +static struct regulator_init_data omap3_vdd1 = { + .constraints = { + .name = "vdd_mpu_iva", + .min_uV = 600000, + .max_uV = 1450000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3_vdd1_supply), + .consumer_supplies = omap3_vdd1_supply, +}; + +static struct regulator_init_data omap3_vdd2 = { + .constraints = { + .name = "vdd_core", + .min_uV = 600000, + .max_uV = 1450000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3_vdd2_supply), + .consumer_supplies = omap3_vdd2_supply, +}; + +static struct twl_regulator_driver_data omap3_vdd1_drvdata = { + .get_voltage = twl_get_voltage, + .set_voltage = twl_set_voltage, +}; + +static struct twl_regulator_driver_data omap3_vdd2_drvdata = { + .get_voltage = twl_get_voltage, + .set_voltage = twl_set_voltage, +}; + void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { @@ -160,6 +215,16 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, pmic_data->irq_base = TWL4030_IRQ_BASE; if (!pmic_data->irq_end) pmic_data->irq_end = TWL4030_IRQ_END; + if (!pmic_data->vdd1) { + omap3_vdd1.driver_data = &omap3_vdd1_drvdata; + omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva"); + pmic_data->vdd1 = &omap3_vdd1; + } + if (!pmic_data->vdd2) { + omap3_vdd2.driver_data = &omap3_vdd2_drvdata; + omap3_vdd2_drvdata.data = voltdm_lookup("core"); + pmic_data->vdd2 = &omap3_vdd2; + } /* Common platform data configurations */ if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) @@ -201,6 +266,7 @@ static struct regulator_init_data omap4_vdac_idata = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .supply_regulator = "V2V1", }; static struct regulator_init_data omap4_vaux2_idata = { @@ -291,6 +357,7 @@ static struct regulator_init_data omap4_vcxio_idata = { }, .num_consumer_supplies = ARRAY_SIZE(omap4_vcxio_supply), .consumer_supplies = omap4_vcxio_supply, + .supply_regulator = "V2V1", }; static struct regulator_init_data omap4_vusb_idata = { @@ -310,6 +377,105 @@ static struct regulator_init_data omap4_clk32kg_idata = { }, }; +static struct regulator_consumer_supply omap4_vdd1_supply[] = { + REGULATOR_SUPPLY("vcc", "mpu.0"), +}; + +static struct regulator_consumer_supply omap4_vdd2_supply[] = { + REGULATOR_SUPPLY("vcc", "iva.0"), +}; + +static struct regulator_consumer_supply omap4_vdd3_supply[] = { + REGULATOR_SUPPLY("vcc", "l3_main.0"), +}; + +static struct regulator_init_data omap4_vdd1 = { + .constraints = { + .name = "vdd_mpu", + .min_uV = 500000, + .max_uV = 1500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_vdd1_supply), + .consumer_supplies = omap4_vdd1_supply, +}; + +static struct regulator_init_data omap4_vdd2 = { + .constraints = { + .name = "vdd_iva", + .min_uV = 500000, + .max_uV = 1500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_vdd2_supply), + .consumer_supplies = omap4_vdd2_supply, +}; + +static struct regulator_init_data omap4_vdd3 = { + .constraints = { + .name = "vdd_core", + .min_uV = 500000, + .max_uV = 1500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_vdd3_supply), + .consumer_supplies = omap4_vdd3_supply, +}; + + +static struct twl_regulator_driver_data omap4_vdd1_drvdata = { + .get_voltage = twl_get_voltage, + .set_voltage = twl_set_voltage, +}; + +static struct twl_regulator_driver_data omap4_vdd2_drvdata = { + .get_voltage = twl_get_voltage, + .set_voltage = twl_set_voltage, +}; + +static struct twl_regulator_driver_data omap4_vdd3_drvdata = { + .get_voltage = twl_get_voltage, + .set_voltage = twl_set_voltage, +}; + +static struct regulator_consumer_supply omap4_v1v8_supply[] = { + REGULATOR_SUPPLY("vio", "1-004b"), +}; + +static struct regulator_init_data omap4_v1v8_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + .always_on = true, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_v1v8_supply), + .consumer_supplies = omap4_v1v8_supply, +}; + +static struct regulator_consumer_supply omap4_v2v1_supply[] = { + REGULATOR_SUPPLY("v2v1", "1-004b"), +}; + +static struct regulator_init_data omap4_v2v1_idata = { + .constraints = { + .min_uV = 2100000, + .max_uV = 2100000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_v2v1_supply), + .consumer_supplies = omap4_v2v1_supply, +}; + void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { @@ -318,6 +484,24 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, if (!pmic_data->irq_end) pmic_data->irq_end = TWL6030_IRQ_END; + if (!pmic_data->vdd1) { + omap4_vdd1.driver_data = &omap4_vdd1_drvdata; + omap4_vdd1_drvdata.data = voltdm_lookup("mpu"); + pmic_data->vdd1 = &omap4_vdd1; + } + + if (!pmic_data->vdd2) { + omap4_vdd2.driver_data = &omap4_vdd2_drvdata; + omap4_vdd2_drvdata.data = voltdm_lookup("iva"); + pmic_data->vdd2 = &omap4_vdd2; + } + + if (!pmic_data->vdd3) { + omap4_vdd3.driver_data = &omap4_vdd3_drvdata; + omap4_vdd3_drvdata.data = voltdm_lookup("core"); + pmic_data->vdd3 = &omap4_vdd3; + } + /* Common platform data configurations */ if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) pmic_data->usb = &omap4_usb_pdata; @@ -350,5 +534,11 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG && !pmic_data->clk32kg) pmic_data->clk32kg = &omap4_clk32kg_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_V1V8 && !pmic_data->v1v8) + pmic_data->v1v8 = &omap4_v1v8_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_V2V1 && !pmic_data->v2v1) + pmic_data->v2v1 = &omap4_v2v1_idata; } #endif /* CONFIG_ARCH_OMAP4 */ diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 09627483a57f..8fe71cfd002c 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -22,6 +22,8 @@ #define TWL_COMMON_REGULATOR_VCXIO (1 << 8) #define TWL_COMMON_REGULATOR_VUSB (1 << 9) #define TWL_COMMON_REGULATOR_CLK32KG (1 << 10) +#define TWL_COMMON_REGULATOR_V1V8 (1 << 11) +#define TWL_COMMON_REGULATOR_V2V1 (1 << 12) /* TWL4030 LDO regulators */ #define TWL_COMMON_REGULATOR_VPLL1 (1 << 4) diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 994d8f591a1d..db84a46ce7fd 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -126,7 +126,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps) tmp = (t.sync_clk + fclk_ps - 1) / fclk_ps; if (tmp > 4) return -ERANGE; - if (tmp <= 0) + if (tmp == 0) tmp = 1; t.page_burst_access = (fclk_ps * tmp) / 1000; diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index a5ec7f8f2ea8..5d8eaf31569c 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -46,6 +46,7 @@ static struct omap_vc_common omap3_vc_common = { }; struct omap_vc_channel omap3_vc_mpu = { + .flags = OMAP_VC_CHANNEL_DEFAULT, .common = &omap3_vc_common, .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 8a36342e60d2..4dc60e83e00d 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -73,7 +73,8 @@ unsigned long voltdm_get_voltage(struct voltagedomain *voltdm) int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt) { - int ret; + int ret, i; + unsigned long volt = 0; if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); @@ -86,9 +87,23 @@ int voltdm_scale(struct voltagedomain *voltdm, return -ENODATA; } - ret = voltdm->scale(voltdm, target_volt); + /* Adjust voltage to the exact voltage from the OPP table */ + for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) { + if (voltdm->volt_data[i].volt_nominal >= target_volt) { + volt = voltdm->volt_data[i].volt_nominal; + break; + } + } + + if (!volt) { + pr_warning("%s: not scaling. OPP voltage for %lu, not found.\n", + __func__, target_volt); + return -EINVAL; + } + + ret = voltdm->scale(voltdm, volt); if (!ret) - voltdm->nominal_volt = target_volt; + voltdm->nominal_volt = volt; return ret; } |