summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/Kconfig1
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c5
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c22
-rw-r--r--arch/arm/mach-omap2/clock33xx_data.c2
-rw-r--r--arch/arm/mach-omap2/clock44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/clockdomain.c15
-rw-r--r--arch/arm/mach-omap2/clockdomains44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/common-board-devices.c34
-rw-r--r--arch/arm/mach-omap2/devices.c81
-rw-r--r--arch/arm/mach-omap2/gpmc.c24
-rw-r--r--arch/arm/mach-omap2/mux34xx.c8
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c63
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c36
-rw-r--r--arch/arm/mach-omap2/pm.h1
-rw-r--r--arch/arm/mach-omap2/pm34xx.c30
-rw-r--r--arch/arm/mach-omap2/serial.c5
-rw-r--r--arch/arm/mach-omap2/timer.c2
-rw-r--r--arch/arm/mach-omap2/twl-common.c3
-rw-r--r--arch/arm/mach-omap2/vc.c2
19 files changed, 279 insertions, 59 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 2a1a898c7f90..d669e227e00c 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -11,7 +11,6 @@ config ARCH_OMAP2PLUS_TYPICAL
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
- select PINCTRL
select PM_RUNTIME
select REGULATOR
select SERIAL_OMAP
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 48d5e41dfbfa..378590694447 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -580,6 +580,11 @@ static void __init igep_wlan_bt_init(void)
} else
return;
+ /* Make sure that the GPIO pins are muxed correctly */
+ omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
err = gpio_request_array(igep_wlan_bt_gpios,
ARRAY_SIZE(igep_wlan_bt_gpios));
if (err) {
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 388c431c745a..d41ab98890ff 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -24,6 +24,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/opp.h>
+#include <linux/cpu.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -444,27 +445,31 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
-static void __init beagle_opp_init(void)
+static int __init beagle_opp_init(void)
{
int r = 0;
- /* Initialize the omap3 opp table */
- if (omap3_opp_init()) {
+ if (!machine_is_omap3_beagle())
+ return 0;
+
+ /* Initialize the omap3 opp table if not already created. */
+ r = omap3_opp_init();
+ if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
pr_err("%s: opp default init failed\n", __func__);
- return;
+ return r;
}
/* Custom OPP enabled for all xM versions */
if (cpu_is_omap3630()) {
struct device *mpu_dev, *iva_dev;
- mpu_dev = omap_device_get_by_hwmod_name("mpu");
+ mpu_dev = get_cpu_device(0);
iva_dev = omap_device_get_by_hwmod_name("iva");
if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
__func__, mpu_dev, iva_dev);
- return;
+ return -ENODEV;
}
/* Enable MPU 1GHz and lower opps */
r = opp_enable(mpu_dev, 800000000);
@@ -484,8 +489,9 @@ static void __init beagle_opp_init(void)
opp_disable(iva_dev, 660000000);
}
}
- return;
+ return 0;
}
+device_initcall(beagle_opp_init);
static void __init omap3_beagle_init(void)
{
@@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void)
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
- beagle_opp_init();
}
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 114ab4b8e0e3..1a45d6bd2539 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -1073,6 +1073,8 @@ static struct omap_clk am33xx_clks[] = {
CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX),
CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX),
CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX),
+ CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX),
+ CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX),
};
int __init am33xx_clk_init(void)
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index d661d138f270..6efc30c961a5 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3294,7 +3294,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X),
CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X),
CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X),
- CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X),
+ CLK("omap-gpmc", "fck", &dummy_ck, CK_443X),
CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X),
CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X),
CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X),
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index cbb879139c51..512e79a842cb 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -925,15 +925,18 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
return -EINVAL;
+ spin_lock_irqsave(&clkdm->lock, flags);
+
/*
* For arch's with no autodeps, clkcm_clk_enable
* should be called for every clock instance or hwmod that is
* enabled, so the clkdm can be force woken up.
*/
- if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps)
+ if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) {
+ spin_unlock_irqrestore(&clkdm->lock, flags);
return 0;
+ }
- spin_lock_irqsave(&clkdm->lock, flags);
arch_clkdm->clkdm_clk_enable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
@@ -950,15 +953,19 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
return -EINVAL;
+ spin_lock_irqsave(&clkdm->lock, flags);
+
if (atomic_read(&clkdm->usecount) == 0) {
+ spin_unlock_irqrestore(&clkdm->lock, flags);
WARN_ON(1); /* underflow */
return -ERANGE;
}
- if (atomic_dec_return(&clkdm->usecount) > 0)
+ if (atomic_dec_return(&clkdm->usecount) > 0) {
+ spin_unlock_irqrestore(&clkdm->lock, flags);
return 0;
+ }
- spin_lock_irqsave(&clkdm->lock, flags);
arch_clkdm->clkdm_clk_disable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index b56d06b48782..95192a062d5d 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -359,7 +359,7 @@ static struct clockdomain iss_44xx_clkdm = {
.clkdm_offs = OMAP4430_CM2_CAM_CAM_CDOFFS,
.wkdep_srcs = iss_wkup_sleep_deps,
.sleepdep_srcs = iss_wkup_sleep_deps,
- .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .flags = CLKDM_CAN_SWSUP,
};
static struct clockdomain l3_dss_44xx_clkdm = {
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 48daac2581b4..84551f205e46 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -64,30 +64,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct spi_board_info *spi_bi = &ads7846_spi_board_info;
int err;
- err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
- if (err) {
- pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
- return;
- }
+ /*
+ * If a board defines get_pendown_state() function, request the pendown
+ * GPIO and set the GPIO debounce time.
+ * If a board does not define the get_pendown_state() function, then
+ * the ads7846 driver will setup the pendown GPIO itself.
+ */
+ if (board_pdata && board_pdata->get_pendown_state) {
+ err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+ if (err) {
+ pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+ return;
+ }
- if (gpio_debounce)
- gpio_set_debounce(gpio_pendown, gpio_debounce);
+ if (gpio_debounce)
+ gpio_set_debounce(gpio_pendown, gpio_debounce);
+
+ gpio_export(gpio_pendown, 0);
+ }
spi_bi->bus_num = bus_num;
spi_bi->irq = gpio_to_irq(gpio_pendown);
+ ads7846_config.gpio_pendown = gpio_pendown;
+
if (board_pdata) {
board_pdata->gpio_pendown = gpio_pendown;
+ board_pdata->gpio_pendown_debounce = gpio_debounce;
spi_bi->platform_data = board_pdata;
- if (board_pdata->get_pendown_state)
- gpio_export(gpio_pendown, 0);
- } else {
- ads7846_config.gpio_pendown = gpio_pendown;
}
- if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
- gpio_free(gpio_pendown);
-
spi_register_board_info(&ads7846_spi_board_info, 1);
}
#else
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index c8c211731d26..c72b5a727720 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -19,6 +19,7 @@
#include <linux/of.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/omap4-keypad.h>
+#include <linux/platform_data/omap_ocp2scp.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
@@ -341,7 +342,7 @@ static void __init omap_init_dmic(void)
oh = omap_hwmod_lookup("dmic");
if (!oh) {
- printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+ pr_err("Could not look up dmic hw_mod\n");
return;
}
@@ -613,6 +614,83 @@ static void omap_init_vout(void)
static inline void omap_init_vout(void) {}
#endif
+#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE)
+static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
+{
+ int cnt = 0;
+
+ while (ocp2scp_dev->drv_name != NULL) {
+ cnt++;
+ ocp2scp_dev++;
+ }
+
+ return cnt;
+}
+
+static void omap_init_ocp2scp(void)
+{
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+ int bus_id = -1, dev_cnt = 0, i;
+ struct omap_ocp2scp_dev *ocp2scp_dev;
+ const char *oh_name, *name;
+ struct omap_ocp2scp_platform_data *pdata;
+
+ if (!cpu_is_omap44xx())
+ return;
+
+ oh_name = "ocp2scp_usb_phy";
+ name = "omap-ocp2scp";
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("%s: could not find omap_hwmod for %s\n", __func__,
+ oh_name);
+ return;
+ }
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ pr_err("%s: No memory for ocp2scp pdata\n", __func__);
+ return;
+ }
+
+ ocp2scp_dev = oh->dev_attr;
+ dev_cnt = count_ocp2scp_devices(ocp2scp_dev);
+
+ if (!dev_cnt) {
+ pr_err("%s: No devices connected to ocp2scp\n", __func__);
+ kfree(pdata);
+ return;
+ }
+
+ pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *)
+ * dev_cnt, GFP_KERNEL);
+ if (!pdata->devices) {
+ pr_err("%s: No memory for ocp2scp pdata devices\n", __func__);
+ kfree(pdata);
+ return;
+ }
+
+ for (i = 0; i < dev_cnt; i++, ocp2scp_dev++)
+ pdata->devices[i] = ocp2scp_dev;
+
+ pdata->dev_cnt = dev_cnt;
+
+ pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL,
+ 0, false);
+ if (IS_ERR(pdev)) {
+ pr_err("Could not build omap_device for %s %s\n",
+ name, oh_name);
+ kfree(pdata->devices);
+ kfree(pdata);
+ return;
+ }
+}
+#else
+static inline void omap_init_ocp2scp(void) { }
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@@ -640,6 +718,7 @@ static int __init omap2_init_devices(void)
omap_init_sham();
omap_init_aes();
omap_init_vout();
+ omap_init_ocp2scp();
return 0;
}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 5ac5cf30406a..92b5718fa722 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -868,9 +868,9 @@ static void __devexit gpmc_mem_exit(void)
}
-static void __devinit gpmc_mem_init(void)
+static int __devinit gpmc_mem_init(void)
{
- int cs;
+ int cs, rc;
unsigned long boot_rom_space = 0;
/* never allocate the first page, to facilitate bug detection;
@@ -890,13 +890,21 @@ static void __devinit gpmc_mem_init(void)
if (!gpmc_cs_mem_enabled(cs))
continue;
gpmc_cs_get_memconf(cs, &base, &size);
- if (gpmc_cs_insert_mem(cs, base, size) < 0)
- BUG();
+ rc = gpmc_cs_insert_mem(cs, base, size);
+ if (IS_ERR_VALUE(rc)) {
+ while (--cs >= 0)
+ if (gpmc_cs_mem_enabled(cs))
+ gpmc_cs_delete_mem(cs);
+ return rc;
+ }
}
+
+ return 0;
}
static __devinit int gpmc_probe(struct platform_device *pdev)
{
+ int rc;
u32 l;
struct resource *res;
@@ -936,7 +944,13 @@ static __devinit int gpmc_probe(struct platform_device *pdev)
dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
GPMC_REVISION_MINOR(l));
- gpmc_mem_init();
+ rc = gpmc_mem_init();
+ if (IS_ERR_VALUE(rc)) {
+ clk_disable_unprepare(gpmc_l3_clk);
+ clk_put(gpmc_l3_clk);
+ dev_err(gpmc_dev, "failed to reserve memory\n");
+ return rc;
+ }
if (IS_ERR_VALUE(gpmc_setup_irq()))
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 17f80e4ab162..c47140bbbec4 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -614,16 +614,16 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
"sys_off_mode", NULL, NULL, NULL,
"gpio_9", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_CTS, 150,
- "uart1_cts", NULL, NULL, NULL,
+ "uart1_cts", "ssi1_rdy_tx", NULL, NULL,
"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RTS, 149,
- "uart1_rts", NULL, NULL, NULL,
+ "uart1_rts", "ssi1_flag_tx", NULL, NULL,
"gpio_149", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RX, 151,
- "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk",
+ "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
"gpio_151", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_TX, 148,
- "uart1_tx", NULL, NULL, NULL,
+ "uart1_tx", "ssi1_dat_tx", NULL, NULL,
"gpio_148", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART2_CTS, 144,
"uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b969ab1d258b..87cc6d058de2 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -422,6 +422,38 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
}
/**
+ * _wait_softreset_complete - wait for an OCP softreset to complete
+ * @oh: struct omap_hwmod * to wait on
+ *
+ * Wait until the IP block represented by @oh reports that its OCP
+ * softreset is complete. This can be triggered by software (see
+ * _ocp_softreset()) or by hardware upon returning from off-mode (one
+ * example is HSMMC). Waits for up to MAX_MODULE_SOFTRESET_WAIT
+ * microseconds. Returns the number of microseconds waited.
+ */
+static int _wait_softreset_complete(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_class_sysconfig *sysc;
+ u32 softrst_mask;
+ int c = 0;
+
+ sysc = oh->class->sysc;
+
+ if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
+ omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs)
+ & SYSS_RESETDONE_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+ else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
+ softrst_mask = (0x1 << sysc->sysc_fields->srst_shift);
+ omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs)
+ & softrst_mask),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+ }
+
+ return c;
+}
+
+/**
* _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
* @oh: struct omap_hwmod *
*
@@ -1282,6 +1314,18 @@ static void _enable_sysc(struct omap_hwmod *oh)
if (!oh->class->sysc)
return;
+ /*
+ * Wait until reset has completed, this is needed as the IP
+ * block is reset automatically by hardware in some cases
+ * (off-mode for example), and the drivers require the
+ * IP to be ready when they access it
+ */
+ if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+ _enable_optional_clocks(oh);
+ _wait_softreset_complete(oh);
+ if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+ _disable_optional_clocks(oh);
+
v = oh->_sysc_cache;
sf = oh->class->sysc->sysc_flags;
@@ -1804,7 +1848,7 @@ static int _am33xx_disable_module(struct omap_hwmod *oh)
*/
static int _ocp_softreset(struct omap_hwmod *oh)
{
- u32 v, softrst_mask;
+ u32 v;
int c = 0;
int ret = 0;
@@ -1834,19 +1878,7 @@ static int _ocp_softreset(struct omap_hwmod *oh)
if (oh->class->sysc->srst_udelay)
udelay(oh->class->sysc->srst_udelay);
- if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
- omap_test_timeout((omap_hwmod_read(oh,
- oh->class->sysc->syss_offs)
- & SYSS_RESETDONE_MASK),
- MAX_MODULE_SOFTRESET_WAIT, c);
- else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
- softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
- omap_test_timeout(!(omap_hwmod_read(oh,
- oh->class->sysc->sysc_offs)
- & softrst_mask),
- MAX_MODULE_SOFTRESET_WAIT, c);
- }
-
+ c = _wait_softreset_complete(oh);
if (c == MAX_MODULE_SOFTRESET_WAIT)
pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
oh->name, MAX_MODULE_SOFTRESET_WAIT);
@@ -2352,6 +2384,9 @@ static int __init _setup_reset(struct omap_hwmod *oh)
if (oh->_state != _HWMOD_STATE_INITIALIZED)
return -EINVAL;
+ if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK)
+ return -EPERM;
+
if (oh->rst_lines_cnt == 0) {
r = _enable(oh);
if (r) {
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 652d0285bd6d..0b1249e00398 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/power/smartreflex.h>
+#include <linux/platform_data/omap_ocp2scp.h>
#include <plat/omap_hwmod.h>
#include <plat/i2c.h>
@@ -2125,6 +2126,14 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
.name = "mcpdm",
.class = &omap44xx_mcpdm_hwmod_class,
.clkdm_name = "abe_clkdm",
+ /*
+ * It's suspected that the McPDM requires an off-chip main
+ * functional clock, controlled via I2C. This IP block is
+ * currently reset very early during boot, before I2C is
+ * available, so it doesn't seem that we have any choice in
+ * the kernel other than to avoid resetting it.
+ */
+ .flags = HWMOD_EXT_OPT_MAIN_CLK,
.mpu_irqs = omap44xx_mcpdm_irqs,
.sdma_reqs = omap44xx_mcpdm_sdma_reqs,
.main_clk = "mcpdm_fck",
@@ -2681,6 +2690,32 @@ static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = {
.sysc = &omap44xx_ocp2scp_sysc,
};
+/* ocp2scp dev_attr */
+static struct resource omap44xx_usb_phy_and_pll_addrs[] = {
+ {
+ .name = "usb_phy",
+ .start = 0x4a0ad080,
+ .end = 0x4a0ae000,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* XXX: Remove this once control module driver is in place */
+ .name = "ctrl_dev",
+ .start = 0x4a002300,
+ .end = 0x4a002303,
+ .flags = IORESOURCE_MEM,
+ },
+ { }
+};
+
+static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
+ {
+ .drv_name = "omap-usb2",
+ .res = omap44xx_usb_phy_and_pll_addrs,
+ },
+ { }
+};
+
/* ocp2scp_usb_phy */
static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.name = "ocp2scp_usb_phy",
@@ -2694,6 +2729,7 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.modulemode = MODULEMODE_HWCTRL,
},
},
+ .dev_attr = ocp2scp_dev_attr,
};
/*
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 686137d164da..67d66131cfa7 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -91,6 +91,7 @@ extern void omap3_save_scratchpad_contents(void);
#define PM_RTA_ERRATUM_i608 (1 << 0)
#define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1)
+#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2)
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
extern u16 pm34xx_errata;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ba670db1fd37..3a904de4313e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -652,14 +652,17 @@ static void __init pm_errata_configure(void)
/* Enable the l2 cache toggling in sleep logic */
enable_omap3630_toggle_l2_on_restore();
if (omap_rev() < OMAP3630_REV_ES1_2)
- pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+ pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 |
+ PM_PER_MEMORIES_ERRATUM_i582);
+ } else if (cpu_is_omap34xx()) {
+ pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582;
}
}
int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
- struct clockdomain *neon_clkdm, *mpu_clkdm;
+ struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm;
int ret;
if (!omap3_has_io_chain_ctrl())
@@ -711,6 +714,8 @@ int __init omap3_pm_init(void)
neon_clkdm = clkdm_lookup("neon_clkdm");
mpu_clkdm = clkdm_lookup("mpu_clkdm");
+ per_clkdm = clkdm_lookup("per_clkdm");
+ wkup_clkdm = clkdm_lookup("wkup_clkdm");
#ifdef CONFIG_SUSPEND
omap_pm_suspend = omap3_pm_suspend;
@@ -727,6 +732,27 @@ int __init omap3_pm_init(void)
if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
omap3630_ctrl_disable_rta();
+ /*
+ * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are
+ * not correctly reset when the PER powerdomain comes back
+ * from OFF or OSWR when the CORE powerdomain is kept active.
+ * See OMAP36xx Erratum i582 "PER Domain reset issue after
+ * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a
+ * complete workaround. The kernel must also prevent the PER
+ * powerdomain from going to OSWR/OFF while the CORE
+ * powerdomain is not going to OSWR/OFF. And if PER last
+ * power state was off while CORE last power state was ON, the
+ * UART3/4 and McBSP2/3 SIDETONE devices need to run a
+ * self-test using their loopback tests; if that fails, those
+ * devices are unusable until the PER/CORE can complete a transition
+ * from ON to OSWR/OFF and then back to ON.
+ *
+ * XXX Technically this workaround is only needed if off-mode
+ * or OSWR is enabled.
+ */
+ if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582))
+ clkdm_add_wkdep(per_clkdm, wkup_clkdm);
+
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0405c8190803..a507cd6cf4f1 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -329,6 +329,11 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
+ if (console_uart_id == bdata->id) {
+ omap_device_enable(pdev);
+ pm_runtime_set_active(&pdev->dev);
+ }
+
oh->dev_attr = uart;
if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 44f9aa7ec0c0..69e46631a7cd 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -467,7 +467,7 @@ OMAP_SYS_TIMER(3_am33xx)
#ifdef CONFIG_ARCH_OMAP4
#ifdef CONFIG_LOCAL_TIMERS
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
- OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START);
+ OMAP44XX_LOCAL_TWD_BASE, 29);
#endif
static void __init omap4_timer_init(void)
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 635e109f5ad3..a256135d8e48 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -73,6 +73,7 @@ void __init omap4_pmic_init(const char *pmic_type,
{
/* PMIC part*/
omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
+ omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
/* Register additional devices on i2c1 bus if needed */
@@ -366,7 +367,7 @@ static struct regulator_init_data omap4_clk32kg_idata = {
};
static struct regulator_consumer_supply omap4_vdd1_supply[] = {
- REGULATOR_SUPPLY("vcc", "mpu.0"),
+ REGULATOR_SUPPLY("vcc", "cpu0"),
};
static struct regulator_consumer_supply omap4_vdd2_supply[] = {
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 880249b17012..75878c37959b 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -264,7 +264,7 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
if (initialized) {
if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
- pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).",
+ pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n",
__func__, voltdm->name, i2c_high_speed);
return;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 06:17:54 +0000