diff options
Diffstat (limited to 'arch/arm/mach-omap2/omap_hwmod_3xxx_data.c')
| -rw-r--r-- | arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 143 |
1 files changed, 132 insertions, 11 deletions
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b26d3c9bca16..a8653af19697 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -527,11 +527,27 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { { .irq = INT_35XX_UART4_IRQ, }, + { .irq = -1 } }; static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, }, { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, }, + { .dma_req = -1 } +}; + +/* + * XXX AM35xx UART4 cannot complete its softreset without uart1_fck or + * uart2_fck being enabled. So we add uart1_fck as an optional clock, + * below, and set the HWMOD_CONTROL_OPT_CLKS_IN_RESET. This really + * should not be needed. The functional clock structure of the AM35xx + * UART4 is extremely unclear and opaque; it is unclear what the role + * of uart1/2_fck is for the UART4. Any clarification from either + * empirical testing or the AM3505/3517 hardware designers would be + * most welcome. + */ +static struct omap_hwmod_opt_clk am35xx_uart4_opt_clks[] = { + { .role = "softreset_uart1_fck", .clk = "uart1_fck" }, }; static struct omap_hwmod am35xx_uart4_hwmod = { @@ -543,11 +559,14 @@ static struct omap_hwmod am35xx_uart4_hwmod = { .omap2 = { .module_offs = CORE_MOD, .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_UART4_SHIFT, + .module_bit = AM35XX_EN_UART4_SHIFT, .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT, + .idlest_idle_bit = AM35XX_ST_UART4_SHIFT, }, }, + .opt_clks = am35xx_uart4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(am35xx_uart4_opt_clks), + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap2_uart_class, }; @@ -1638,25 +1657,20 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { /* usb_otg_hs */ static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = { - { .name = "mc", .irq = 71 }, { .irq = -1 } }; static struct omap_hwmod_class am35xx_usbotg_class = { .name = "am35xx_usbotg", - .sysc = NULL, }; static struct omap_hwmod am35xx_usbhsotg_hwmod = { .name = "am35x_otg_hs", .mpu_irqs = am35xx_usbhsotg_mpu_irqs, - .main_clk = NULL, - .prcm = { - .omap2 = { - }, - }, + .main_clk = "hsotgusb_fck", .class = &am35xx_usbotg_class, + .flags = HWMOD_NO_IDLEST, }; /* MMC/SD/SDIO common */ @@ -2097,9 +2111,10 @@ static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = { static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = { .master = &am35xx_usbhsotg_hwmod, .slave = &omap3xxx_l3_main_hwmod, - .clk = "core_l3_ick", + .clk = "hsotgusb_ick", .user = OCP_USER_MPU, }; + /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { .master = &omap3xxx_l4_core_hwmod, @@ -2243,6 +2258,7 @@ static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = { .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1, .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = { @@ -2393,7 +2409,7 @@ static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = { static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = { .master = &omap3xxx_l4_core_hwmod, .slave = &am35xx_usbhsotg_hwmod, - .clk = "l4_ick", + .clk = "hsotgusb_ick", .addr = am35xx_usbhsotg_addrs, .user = OCP_USER_MPU, }; @@ -3138,6 +3154,107 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* am35xx has Davinci MDIO & EMAC */ +static struct omap_hwmod_class am35xx_mdio_class = { + .name = "davinci_mdio", +}; + +static struct omap_hwmod am35xx_mdio_hwmod = { + .name = "davinci_mdio", + .class = &am35xx_mdio_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* + * XXX Should be connected to an IPSS hwmod, not the L3 directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_mdio__l3 = { + .master = &am35xx_mdio_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "emac_fck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am35xx_mdio_addrs[] = { + { + .pa_start = AM35XX_IPSS_MDIO_BASE, + .pa_end = AM35XX_IPSS_MDIO_BASE + SZ_4K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> davinci mdio */ +/* + * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_mdio_hwmod, + .clk = "emac_fck", + .addr = am35xx_mdio_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = { + { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ }, + { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ }, + { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ }, + { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ }, + { .irq = -1 } +}; + +static struct omap_hwmod_class am35xx_emac_class = { + .name = "davinci_emac", +}; + +static struct omap_hwmod am35xx_emac_hwmod = { + .name = "davinci_emac", + .mpu_irqs = am35xx_emac_mpu_irqs, + .class = &am35xx_emac_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* l3_core -> davinci emac interface */ +/* + * XXX Should be connected to an IPSS hwmod, not the L3 directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_emac__l3 = { + .master = &am35xx_emac_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "emac_ick", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am35xx_emac_addrs[] = { + { + .pa_start = AM35XX_IPSS_EMAC_BASE, + .pa_end = AM35XX_IPSS_EMAC_BASE + 0x30000 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> davinci emac */ +/* + * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; + * but this will probably require some additional hwmod core support, + * so is left as a future to-do item. + */ +static struct omap_hwmod_ocp_if am35xx_l4_core__emac = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_emac_hwmod, + .clk = "emac_ick", + .addr = am35xx_emac_addrs, + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, @@ -3266,6 +3383,10 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__usb_tll_hs, &omap3xxx_l4_core__es3plus_mmc1, &omap3xxx_l4_core__es3plus_mmc2, + &am35xx_mdio__l3, + &am35xx_l4_core__mdio, + &am35xx_emac__l3, + &am35xx_l4_core__emac, NULL }; |