1 files changed, 44 insertions, 44 deletions

diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index c65efc3cf81f..4e2896ad0119 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -39,8 +39,8 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
 	u32 reg, prog_io;
 	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
 
-	if (mmc->slots[0].remux)
-		mmc->slots[0].remux(dev, slot, power_on);
+	if (mmc->remux)
+		mmc->remux(dev, slot, power_on);
 
 	/*
 	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
@@ -62,7 +62,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
 			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
 		}
 
-		if (mmc->slots[0].internal_clock) {
+		if (mmc->internal_clock) {
 			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
 			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
@@ -115,7 +115,7 @@ static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
 	u32 reg;
 
 	reg = omap_ctrl_readl(control_devconf1_offset);
-	if (mmc->slots[0].internal_clock)
+	if (mmc->internal_clock)
 		reg |= OMAP2_MMCSDIO2ADPCLKISEL;
 	else
 		reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
@@ -127,8 +127,8 @@ static void hsmmc2_before_set_reg(struct device *dev, int slot,
 {
 	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
 
-	if (mmc->slots[0].remux)
-		mmc->slots[0].remux(dev, slot, power_on);
+	if (mmc->remux)
+		mmc->remux(dev, slot, power_on);
 
 	if (power_on)
 		hsmmc2_select_input_clk_src(mmc);
@@ -154,14 +154,14 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
 static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
 				  *mmc_controller, int controller_nr)
 {
-	if (gpio_is_valid(mmc_controller->slots[0].switch_pin) &&
-		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
-					OMAP_PIN_INPUT_PULLUP);
-	if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) &&
-		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
-					OMAP_PIN_INPUT_PULLUP);
+	if (gpio_is_valid(mmc_controller->switch_pin) &&
+	    (mmc_controller->switch_pin < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->switch_pin,
+				   OMAP_PIN_INPUT_PULLUP);
+	if (gpio_is_valid(mmc_controller->gpio_wp) &&
+	    (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->gpio_wp,
+				   OMAP_PIN_INPUT_PULLUP);
 	if (cpu_is_omap34xx()) {
 		if (controller_nr == 0) {
 			omap_mux_init_signal("sdmmc1_clk",
@@ -170,7 +170,7 @@ static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
 				OMAP_PIN_INPUT_PULLUP);
 			omap_mux_init_signal("sdmmc1_dat0",
 				OMAP_PIN_INPUT_PULLUP);
-			if (mmc_controller->slots[0].caps &
+			if (mmc_controller->caps &
 				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
 				omap_mux_init_signal("sdmmc1_dat1",
 					OMAP_PIN_INPUT_PULLUP);
@@ -179,7 +179,7 @@ static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
 				omap_mux_init_signal("sdmmc1_dat3",
 					OMAP_PIN_INPUT_PULLUP);
 			}
-			if (mmc_controller->slots[0].caps &
+			if (mmc_controller->caps &
 						MMC_CAP_8_BIT_DATA) {
 				omap_mux_init_signal("sdmmc1_dat4",
 					OMAP_PIN_INPUT_PULLUP);
@@ -204,7 +204,7 @@ static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
 			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7
 			 * need to be muxed in the board-*.c files
 			 */
-			if (mmc_controller->slots[0].caps &
+			if (mmc_controller->caps &
 				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
 				omap_mux_init_signal("sdmmc2_dat1",
 					OMAP_PIN_INPUT_PULLUP);
@@ -213,7 +213,7 @@ static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
 				omap_mux_init_signal("sdmmc2_dat3",
 					OMAP_PIN_INPUT_PULLUP);
 			}
-			if (mmc_controller->slots[0].caps &
+			if (mmc_controller->caps &
 							MMC_CAP_8_BIT_DATA) {
 				omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
 					OMAP_PIN_INPUT_PULLUP);
@@ -249,23 +249,23 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	else
 		snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
 								c->mmc, 1);
-	mmc->slots[0].name = hc_name;
+	mmc->name = hc_name;
 	mmc->nr_slots = 1;
-	mmc->slots[0].caps = c->caps;
-	mmc->slots[0].internal_clock = !c->ext_clock;
+	mmc->caps = c->caps;
+	mmc->internal_clock = !c->ext_clock;
 	mmc->reg_offset = 0;
 
-	mmc->slots[0].switch_pin = c->gpio_cd;
-	mmc->slots[0].gpio_wp = c->gpio_wp;
+	mmc->switch_pin = c->gpio_cd;
+	mmc->gpio_wp = c->gpio_wp;
 
-	mmc->slots[0].remux = c->remux;
-	mmc->slots[0].init_card = c->init_card;
+	mmc->remux = c->remux;
+	mmc->init_card = c->init_card;
 
 	if (c->cover_only)
-		mmc->slots[0].cover = 1;
+		mmc->cover = 1;
 
 	if (c->nonremovable)
-		mmc->slots[0].nonremovable = 1;
+		mmc->nonremovable = 1;
 
 	/*
 	 * NOTE:  MMC slots should have a Vcc regulator set up.
@@ -275,42 +275,42 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	 * temporary HACK: ocr_mask instead of fixed supply
 	 */
 	if (soc_is_am35xx())
-		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+		mmc->ocr_mask = MMC_VDD_165_195 |
 					 MMC_VDD_26_27 |
 					 MMC_VDD_27_28 |
 					 MMC_VDD_29_30 |
 					 MMC_VDD_30_31 |
 					 MMC_VDD_31_32;
 	else
-		mmc->slots[0].ocr_mask = c->ocr_mask;
+		mmc->ocr_mask = c->ocr_mask;
 
 	if (!soc_is_am35xx())
-		mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+		mmc->features |= HSMMC_HAS_PBIAS;
 
 	switch (c->mmc) {
 	case 1:
-		if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+		if (mmc->features & HSMMC_HAS_PBIAS) {
 			/* on-chip level shifting via PBIAS0/PBIAS1 */
-			mmc->slots[0].before_set_reg =
+			mmc->before_set_reg =
 					omap_hsmmc1_before_set_reg;
-			mmc->slots[0].after_set_reg =
+			mmc->after_set_reg =
 					omap_hsmmc1_after_set_reg;
 		}
 
 		if (soc_is_am35xx())
-			mmc->slots[0].set_power = nop_mmc_set_power;
+			mmc->set_power = nop_mmc_set_power;
 
 		/* OMAP3630 HSMMC1 supports only 4-bit */
 		if (cpu_is_omap3630() &&
 				(c->caps & MMC_CAP_8_BIT_DATA)) {
 			c->caps &= ~MMC_CAP_8_BIT_DATA;
 			c->caps |= MMC_CAP_4_BIT_DATA;
-			mmc->slots[0].caps = c->caps;
+			mmc->caps = c->caps;
 		}
 		break;
 	case 2:
 		if (soc_is_am35xx())
-			mmc->slots[0].set_power = am35x_hsmmc2_set_power;
+			mmc->set_power = am35x_hsmmc2_set_power;
 
 		if (c->ext_clock)
 			c->transceiver = 1;
@@ -318,17 +318,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 			c->caps &= ~MMC_CAP_8_BIT_DATA;
 			c->caps |= MMC_CAP_4_BIT_DATA;
 		}
-		if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+		if (mmc->features & HSMMC_HAS_PBIAS) {
 			/* off-chip level shifting, or none */
-			mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
-			mmc->slots[0].after_set_reg = NULL;
+			mmc->before_set_reg = hsmmc2_before_set_reg;
+			mmc->after_set_reg = NULL;
 		}
 		break;
 	case 3:
 	case 4:
 	case 5:
-		mmc->slots[0].before_set_reg = NULL;
-		mmc->slots[0].after_set_reg = NULL;
+		mmc->before_set_reg = NULL;
+		mmc->after_set_reg = NULL;
 		break;
 	default:
 		pr_err("MMC%d configuration not supported!\n", c->mmc);
@@ -363,8 +363,8 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
 		if (!mmc_pdata)
 			continue;
 
-		mmc_pdata->slots[0].switch_pin = c->gpio_cd;
-		mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
+		mmc_pdata->switch_pin = c->gpio_cd;
+		mmc_pdata->gpio_wp = c->gpio_wp;
 
 		res = omap_device_register(pdev);
 		if (res)
@@ -464,7 +464,7 @@ put_pdev:
 	platform_device_put(pdev);
 
 free_name:
-	kfree(mmc_data->slots[0].name);
+	kfree(mmc_data->name);
 
 free_mmc:
 	kfree(mmc_data);