diff options
Diffstat (limited to 'arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts')
| -rw-r--r-- | arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 283 |
1 files changed, 0 insertions, 283 deletions
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts deleted file mode 100644 index ee9e7d5c97a9..000000000000 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ /dev/null @@ -1,283 +0,0 @@ -/* - * Reference Device Tree Source for the armadillo 800 eva board - * - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a7740.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "armadillo 800 eva reference"; - compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740"; - - aliases { - serial1 = &scifa1; - }; - - chosen { - bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; - }; - - memory { - device_type = "memory"; - reg = <0x40000000 0x20000000>; - }; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_sdhi0: regulator@1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pfc 75 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator@2 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sdhi0>; - - enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>; - gpios = <&pfc 17 GPIO_ACTIVE_HIGH>; - states = <3300000 0 - 1800000 1>; - - enable-active-high; - }; - - reg_5p0v: regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "fixed-5.0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power-key { - gpios = <&pfc 99 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "SW3"; - gpio-key,wakeup; - }; - - back-key { - gpios = <&pfc 100 GPIO_ACTIVE_LOW>; - linux,code = <KEY_BACK>; - label = "SW4"; - }; - - menu-key { - gpios = <&pfc 97 GPIO_ACTIVE_LOW>; - linux,code = <KEY_MENU>; - label = "SW5"; - }; - - home-key { - gpios = <&pfc 98 GPIO_ACTIVE_LOW>; - linux,code = <KEY_HOME>; - label = "SW6"; - }; - }; - - leds { - compatible = "gpio-leds"; - led3 { - gpios = <&pfc 102 GPIO_ACTIVE_HIGH>; - label = "LED3"; - }; - led4 { - gpios = <&pfc 111 GPIO_ACTIVE_HIGH>; - label = "LED4"; - }; - led5 { - gpios = <&pfc 110 GPIO_ACTIVE_HIGH>; - label = "LED5"; - }; - led6 { - gpios = <&pfc 177 GPIO_ACTIVE_HIGH>; - label = "LED6"; - }; - }; - - i2c2: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "i2c-gpio"; - gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */ - &pfc 91 GPIO_ACTIVE_HIGH /* scl */ - >; - i2c-gpio,delay-us = <5>; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>; - brightness-levels = <0 1 2 4 8 16 32 64 128 255>; - default-brightness-level = <9>; - pinctrl-0 = <&backlight_pins>; - pinctrl-names = "default"; - power-supply = <®_5p0v>; - enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>; - }; - - sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "i2s"; - - simple-audio-card,cpu { - sound-dai = <&sh_fsi2 0>; - bitclock-inversion; - }; - - simple-audio-card,codec { - sound-dai = <&wm8978>; - bitclock-master; - frame-master; - system-clock-frequency = <12288000>; - }; - }; -}; - -ðer { - pinctrl-0 = <ðer_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy0>; - status = "ok"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -&i2c0 { - status = "okay"; - touchscreen@55 { - compatible = "sitronix,st1232"; - reg = <0x55>; - interrupt-parent = <&irqpin1>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&st1232_pins>; - pinctrl-names = "default"; - gpios = <&pfc 166 GPIO_ACTIVE_LOW>; - }; - - wm8978: wm8978@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8978"; - reg = <0x1a>; - }; -}; - -&i2c2 { - status = "okay"; - rtc@30 { - compatible = "sii,s35390a"; - reg = <0x30>; - }; -}; - -&pfc { - ether_pins: ether { - renesas,groups = "gether_mii", "gether_int"; - renesas,function = "gether"; - }; - - scifa1_pins: serial1 { - renesas,groups = "scifa1_data"; - renesas,function = "scifa1"; - }; - - st1232_pins: touchscreen { - renesas,groups = "intc_irq10"; - renesas,function = "intc"; - }; - - backlight_pins: backlight { - renesas,groups = "tpu0_to2_1"; - renesas,function = "tpu0"; - }; - - mmc0_pins: mmc0 { - renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1"; - renesas,function = "mmc0"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; - renesas,function = "sdhi0"; - }; - - fsia_pins: sounda { - renesas,groups = "fsia_sclk_in", "fsia_mclk_out", - "fsia_data_in_1", "fsia_data_out_0"; - renesas,function = "fsia"; - }; -}; - -&tpu { - status = "okay"; -}; - -&mmcif0 { - pinctrl-0 = <&mmc0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <®_3p3v>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&scifa1 { - pinctrl-0 = <&scifa1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - bus-width = <4>; - cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&sh_fsi2 { - pinctrl-0 = <&fsia_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; |