summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/regulator/88pm800.txt38
-rw-r--r--Documentation/devicetree/bindings/regulator/max8660.txt47
-rw-r--r--Documentation/devicetree/bindings/regulator/palmas-pmic.txt4
-rw-r--r--Documentation/devicetree/bindings/regulator/pfuze100.txt115
-rw-r--r--Documentation/devicetree/bindings/regulator/regulator.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/efm32-spi.txt34
-rw-r--r--Documentation/devicetree/bindings/spi/spi-bus.txt10
-rw-r--r--Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt42
-rw-r--r--Documentation/devicetree/bindings/spi/ti_qspi.txt22
-rw-r--r--Documentation/kernel-parameters.txt2
-rw-r--r--Documentation/spi/spi-summary2
11 files changed, 314 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/regulator/88pm800.txt b/Documentation/devicetree/bindings/regulator/88pm800.txt
new file mode 100644
index 000000000000..e8a54c2a5821
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pm800.txt
@@ -0,0 +1,38 @@
+Marvell 88PM800 regulator
+
+Required properties:
+- compatible: "marvell,88pm800"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name (or the deprecated
+ regulator-compatible property if present), with valid values listed below.
+ The content of each sub-node is defined by the standard binding for
+ regulators; see regulator.txt.
+
+The valid names for regulators are:
+
+ buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
+ ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
+
+Example:
+
+ pmic: 88pm800@31 {
+ compatible = "marvell,88pm800";
+ reg = <0x31>;
+
+ regulators {
+ buck1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ ldo1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <15000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+...
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/max8660.txt b/Documentation/devicetree/bindings/regulator/max8660.txt
new file mode 100644
index 000000000000..8ba994d8a142
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8660.txt
@@ -0,0 +1,47 @@
+Maxim MAX8660 voltage regulator
+
+Required properties:
+- compatible: must be one of "maxim,max8660", "maxim,max8661"
+- reg: I2C slave address, usually 0x34
+- any required generic properties defined in regulator.txt
+
+Example:
+
+ i2c_master {
+ max8660@34 {
+ compatible = "maxim,max8660";
+ reg = <0x34>;
+
+ regulators {
+ regulator@0 {
+ regulator-compatible= "V3(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@1 {
+ regulator-compatible= "V4(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@2 {
+ regulator-compatible= "V5(LDO)";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ regulator@3 {
+ regulator-compatible= "V6(LDO)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@4 {
+ regulator-compatible= "V7(LDO)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
index 30b0581bb1ce..a22e4c70db5c 100644
--- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -25,8 +25,8 @@ Optional nodes:
Additional custom properties are listed below.
For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP,
- smps45, smps457, smps7 depending on variant, smps6, smps[8-10],
- ldo[1-9], ldoln, ldousb.
+ smps45, smps457, smps7 depending on variant, smps6, smps[8-9],
+ smps10_out2, smps10_out1, do[1-9], ldoln, ldousb.
Optional sub-node properties:
ti,warm-reset - maintain voltage during warm reset(boolean)
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
new file mode 100644
index 000000000000..fc989b2e8057
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -0,0 +1,115 @@
+PFUZE100 family of regulators
+
+Required properties:
+- compatible: "fsl,pfuze100"
+- reg: I2C slave address
+
+Required child node:
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Please refer to below doc
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+
+ The valid names for regulators are:
+ sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 48a3b8e5d6bd..2bd8f0978765 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -12,6 +12,8 @@ Optional properties:
- regulator-allow-bypass: allow the regulator to go into bypass mode
- <name>-supply: phandle to the parent supply/regulator node
- regulator-ramp-delay: ramp delay for regulator(in uV/uS)
+ For hardwares which support disabling ramp rate, it should be explicitly
+ intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple
diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt
new file mode 100644
index 000000000000..a590ca51be75
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt
@@ -0,0 +1,34 @@
+* Energy Micro EFM32 SPI
+
+Required properties:
+- #address-cells: see spi-bus.txt
+- #size-cells: see spi-bus.txt
+- compatible: should be "efm32,spi"
+- reg: Offset and length of the register set for the controller
+- interrupts: pair specifying rx and tx irq
+- clocks: phandle to the spi clock
+- cs-gpios: see spi-bus.txt
+- location: Value to write to the ROUTE register's LOCATION bitfield to configure the pinmux for the device, see datasheet for values.
+
+Example:
+
+spi1: spi@0x4000c400 { /* USART1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "efm32,spi";
+ reg = <0x4000c400 0x400>;
+ interrupts = <15 16>;
+ clocks = <&cmu 20>;
+ cs-gpios = <&gpio 51 1>; // D3
+ location = <1>;
+ status = "ok";
+
+ ks8851@0 {
+ compatible = "ks8851";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+ interrupt-parent = <&boardfpga>;
+ interrupts = <4>;
+ status = "ok";
+ };
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
index 296015e3c632..800dafe5b01b 100644
--- a/Documentation/devicetree/bindings/spi/spi-bus.txt
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -55,6 +55,16 @@ contain the following properties.
chip select active high
- spi-3wire - (optional) Empty property indicating device requires
3-wire mode.
+- spi-tx-bus-width - (optional) The bus width(number of data wires) that
+ used for MOSI. Defaults to 1 if not present.
+- spi-rx-bus-width - (optional) The bus width(number of data wires) that
+ used for MISO. Defaults to 1 if not present.
+
+Some SPI controllers and devices support Dual and Quad SPI transfer mode.
+It allows data in SPI system transfered in 2 wires(DUAL) or 4 wires(QUAD).
+Now the value that spi-tx-bus-width and spi-rx-bus-width can receive is
+only 1(SINGLE), 2(DUAL) and 4(QUAD).
+Dual/Quad mode is not allowed when 3-wire mode is used.
If a gpio chipselect is used for the SPI slave the gpio number will be passed
via the cs_gpio
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
new file mode 100644
index 000000000000..a1fb3035a42b
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -0,0 +1,42 @@
+ARM Freescale DSPI controller
+
+Required properties:
+- compatible : "fsl,vf610-dspi"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain SPI controller interrupt
+- clocks: from common clock binding: handle to dspi clock.
+- clock-names: from common clock binding: Shall be "dspi".
+- pinctrl-0: pin control group to be used for this controller.
+- pinctrl-names: must contain a "default" entry.
+- spi-num-chipselects : the number of the chipselect signals.
+- bus-num : the slave chip chipselect signal number.
+Example:
+
+dspi0@4002c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x4002c000 0x1000>;
+ interrupts = <0 67 0x04>;
+ clocks = <&clks VF610_CLK_DSPI0>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi0_1>;
+ status = "okay";
+
+ sflash: at26df081a@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at26df081a";
+ spi-max-frequency = <16000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ linux,modalias = "m25p80";
+ modal = "at26df081a";
+ };
+};
+
+
diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt
new file mode 100644
index 000000000000..1f9641ade0b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt
@@ -0,0 +1,22 @@
+TI QSPI controller.
+
+Required properties:
+- compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi".
+- reg: Should contain QSPI registers location and length.
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+- ti,hwmods: Name of the hwmod associated to the QSPI
+
+Recommended properties:
+- spi-max-frequency: Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+qspi: qspi@4b300000 {
+ compatible = "ti,dra7xxx-qspi";
+ reg = <0x4b300000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <25000000>;
+ ti,hwmods = "qspi";
+};
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 15356aca938c..7f9d4f53882c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2953,7 +2953,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
improve throughput, but will also increase the
amount of memory reserved for use by the client.
- swapaccount[=0|1]
+ swapaccount=[0|1]
[KNL] Enable accounting of swap in memory resource
controller if no parameter or 1 is given or disable
it if 0 is given (See Documentation/cgroups/memory.txt)
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 2331eb214146..f21edb983413 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -215,7 +215,7 @@ So for example arch/.../mach-*/board-*.c files might have code like:
/* if your mach-* infrastructure doesn't support kernels that can
* run on multiple boards, pdata wouldn't benefit from "__init".
*/
- static struct mysoc_spi_data __initdata pdata = { ... };
+ static struct mysoc_spi_data pdata __initdata = { ... };
static __init board_init(void)
{
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 03:06:17 +0000