summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/DocBook/media/v4l/compat.xml24
-rw-r--r--Documentation/DocBook/media/v4l/func-poll.xml35
-rw-r--r--Documentation/DocBook/media/v4l/v4l2.xml11
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml2
-rw-r--r--Documentation/SubmittingPatches1
-rw-r--r--Documentation/cgroups/cpusets.txt6
-rw-r--r--Documentation/devicetree/bindings/dma/rcar-audmapp.txt6
-rw-r--r--Documentation/devicetree/bindings/input/atmel,maxtouch.txt11
-rw-r--r--Documentation/devicetree/bindings/net/stmmac.txt4
-rw-r--r--Documentation/devicetree/bindings/regulator/tps65090.txt4
-rw-r--r--Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/rockchip-i2s.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-rockchip.txt8
-rw-r--r--Documentation/devicetree/bindings/staging/imx-drm/ldb.txt15
-rw-r--r--Documentation/devicetree/bindings/usb/mxs-phy.txt1
-rw-r--r--Documentation/devicetree/bindings/video/analog-tv-connector.txt4
-rw-r--r--Documentation/devicetree/of_selftest.txt211
-rw-r--r--Documentation/filesystems/nfs/nfs-rdma.txt16
-rw-r--r--Documentation/filesystems/seq_file.txt33
-rw-r--r--Documentation/gpio/consumer.txt24
-rw-r--r--Documentation/i2c/dev-interface10
-rw-r--r--Documentation/kernel-parameters.txt1
-rw-r--r--Documentation/misc-devices/lis3lv02d2
-rw-r--r--Documentation/networking/filter.txt6
-rw-r--r--Documentation/power/regulator/consumer.txt7
-rw-r--r--Documentation/power/regulator/design.txt8
-rw-r--r--Documentation/power/regulator/machine.txt4
-rw-r--r--Documentation/power/regulator/overview.txt6
-rw-r--r--Documentation/power/regulator/regulator.txt6
29 files changed, 408 insertions, 62 deletions
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index eee6f0f4aa43..3a626d1b8f2e 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2545,6 +2545,30 @@ fields changed from _s32 to _u32.
</orderedlist>
</section>
+ <section>
+ <title>V4L2 in Linux 3.16</title>
+ <orderedlist>
+ <listitem>
+ <para>Added event V4L2_EVENT_SOURCE_CHANGE.
+ </para>
+ </listitem>
+ </orderedlist>
+ </section>
+
+ <section>
+ <title>V4L2 in Linux 3.17</title>
+ <orderedlist>
+ <listitem>
+ <para>Extended &v4l2-pix-format;. Added format flags.
+ </para>
+ </listitem>
+ <listitem>
+ <para>Added compound control types and &VIDIOC-QUERY-EXT-CTRL;.
+ </para>
+ </listitem>
+ </orderedlist>
+ </section>
+
<section id="other">
<title>Relation of V4L2 to other Linux multimedia APIs</title>
diff --git a/Documentation/DocBook/media/v4l/func-poll.xml b/Documentation/DocBook/media/v4l/func-poll.xml
index 85cad8bff5ba..4c73f115219b 100644
--- a/Documentation/DocBook/media/v4l/func-poll.xml
+++ b/Documentation/DocBook/media/v4l/func-poll.xml
@@ -29,9 +29,12 @@ can suspend execution until the driver has captured data or is ready
to accept data for output.</para>
<para>When streaming I/O has been negotiated this function waits
-until a buffer has been filled or displayed and can be dequeued with
-the &VIDIOC-DQBUF; ioctl. When buffers are already in the outgoing
-queue of the driver the function returns immediately.</para>
+until a buffer has been filled by the capture device and can be dequeued
+with the &VIDIOC-DQBUF; ioctl. For output devices this function waits
+until the device is ready to accept a new buffer to be queued up with
+the &VIDIOC-QBUF; ioctl for display. When buffers are already in the outgoing
+queue of the driver (capture) or the incoming queue isn't full (display)
+the function returns immediately.</para>
<para>On success <function>poll()</function> returns the number of
file descriptors that have been selected (that is, file descriptors
@@ -44,10 +47,22 @@ Capture devices set the <constant>POLLIN</constant> and
flags. When the function timed out it returns a value of zero, on
failure it returns <returnvalue>-1</returnvalue> and the
<varname>errno</varname> variable is set appropriately. When the
-application did not call &VIDIOC-QBUF; or &VIDIOC-STREAMON; yet the
+application did not call &VIDIOC-STREAMON; the
<function>poll()</function> function succeeds, but sets the
<constant>POLLERR</constant> flag in the
-<structfield>revents</structfield> field.</para>
+<structfield>revents</structfield> field. When the
+application has called &VIDIOC-STREAMON; for a capture device but hasn't
+yet called &VIDIOC-QBUF;, the <function>poll()</function> function
+succeeds and sets the <constant>POLLERR</constant> flag in the
+<structfield>revents</structfield> field. For output devices this
+same situation will cause <function>poll()</function> to succeed
+as well, but it sets the <constant>POLLOUT</constant> and
+<constant>POLLWRNORM</constant> flags in the <structfield>revents</structfield>
+field.</para>
+
+ <para>If an event occurred (see &VIDIOC-DQEVENT;) then
+<constant>POLLPRI</constant> will be set in the <structfield>revents</structfield>
+field and <function>poll()</function> will return.</para>
<para>When use of the <function>read()</function> function has
been negotiated and the driver does not capture yet, the
@@ -58,10 +73,18 @@ continuously (as opposed to, for example, still images) the function
may return immediately.</para>
<para>When use of the <function>write()</function> function has
-been negotiated the <function>poll</function> function just waits
+been negotiated and the driver does not stream yet, the
+<function>poll</function> function starts streaming. When that fails
+it returns a <constant>POLLERR</constant> as above. Otherwise it waits
until the driver is ready for a non-blocking
<function>write()</function> call.</para>
+ <para>If the caller is only interested in events (just
+<constant>POLLPRI</constant> is set in the <structfield>events</structfield>
+field), then <function>poll()</function> will <emphasis>not</emphasis>
+start streaming if the driver does not stream yet. This makes it
+possible to just poll for events and not for buffers.</para>
+
<para>All drivers implementing the <function>read()</function> or
<function>write()</function> function or streaming I/O must also
support the <function>poll()</function> function.</para>
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index f2f81f06a17b..7cfe618f754d 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -152,10 +152,11 @@ structs, ioctls) must be noted in more detail in the history chapter
applications. -->
<revision>
- <revnumber>3.16</revnumber>
- <date>2014-05-27</date>
- <authorinitials>lp</authorinitials>
- <revremark>Extended &v4l2-pix-format;. Added format flags.
+ <revnumber>3.17</revnumber>
+ <date>2014-08-04</date>
+ <authorinitials>lp, hv</authorinitials>
+ <revremark>Extended &v4l2-pix-format;. Added format flags. Added compound control types
+and VIDIOC_QUERY_EXT_CTRL.
</revremark>
</revision>
@@ -538,7 +539,7 @@ and discussions on the V4L mailing list.</revremark>
</partinfo>
<title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.14</subtitle>
+ <subtitle>Revision 3.17</subtitle>
<chapter id="common">
&sub-common;
diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml
index 1ba9e999af3f..c62a7360719b 100644
--- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml
@@ -119,7 +119,7 @@
</row>
<row>
<entry>&v4l2-rect;</entry>
- <entry><structfield>rect</structfield></entry>
+ <entry><structfield>r</structfield></entry>
<entry>Selection rectangle, in pixels.</entry>
</row>
<row>
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 0a523c9a5ff4..482c74947de0 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -794,6 +794,7 @@ Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer".
<http://www.kroah.com/log/linux/maintainer-03.html>
<http://www.kroah.com/log/linux/maintainer-04.html>
<http://www.kroah.com/log/linux/maintainer-05.html>
+ <http://www.kroah.com/log/linux/maintainer-06.html>
NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
<https://lkml.org/lkml/2005/7/11/336>
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index 7740038d82bc..3c94ff3f9693 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -345,14 +345,14 @@ the named feature on.
The implementation is simple.
Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag
-PF_SPREAD_PAGE for each task that is in that cpuset or subsequently
+PFA_SPREAD_PAGE for each task that is in that cpuset or subsequently
joins that cpuset. The page allocation calls for the page cache
-is modified to perform an inline check for this PF_SPREAD_PAGE task
+is modified to perform an inline check for this PFA_SPREAD_PAGE task
flag, and if set, a call to a new routine cpuset_mem_spread_node()
returns the node to prefer for the allocation.
Similarly, setting 'cpuset.memory_spread_slab' turns on the flag
-PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
+PFA_SPREAD_SLAB, and appropriately marked slab caches will allocate
pages from the node returned by cpuset_mem_spread_node().
The cpuset_mem_spread_node() routine is also simple. It uses the
diff --git a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt
index 9f1d750d76de..61bca509d7b9 100644
--- a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt
+++ b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt
@@ -16,9 +16,9 @@ Example:
* DMA client
Required properties:
-- dmas: a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs,
- where SRS/DRS values are fixed handles, specified in the SoC
- manual as the value that would be written into the PDMACHCR.
+- dmas: a list of <[DMA multiplexer phandle] [SRS << 8 | DRS]> pairs.
+ where SRS/DRS are specified in the SoC manual.
+ It will be written into PDMACHCR as high 16-bit parts.
- dma-names: a list of DMA channel names, one per "dmas" entry
Example:
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index baef432e8369..1852906517ab 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -11,10 +11,17 @@ Required properties:
Optional properties for main touchpad device:
-- linux,gpio-keymap: An array of up to 4 entries indicating the Linux
- keycode generated by each GPIO. Linux keycodes are defined in
+- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
+ on GPIO bit changes. An array of up to 8 entries can be provided
+ indicating the Linux keycode mapped to each bit of the status byte,
+ starting at the LSB. Linux keycodes are defined in
<dt-bindings/input/input.h>.
+ Note: the numbering of the GPIOs and the bit they start at varies between
+ maXTouch devices. You must either refer to the documentation, or
+ experiment to determine which bit corresponds to which input. Use
+ KEY_RESERVED for unused padding values.
+
Example:
touch@4b {
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 9b03c57563a4..e45ac3f926b1 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -39,6 +39,10 @@ Optional properties:
further clocks may be specified in derived bindings.
- clock-names: One name for each entry in the clocks property, the
first one should be "stmmaceth".
+- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
+ available this clock is used for programming the Timestamp Addend Register.
+ If not passed then the system clock will be used and this is fine on some
+ platforms.
Examples:
diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt
index 340980239ea9..ca69f5e3040c 100644
--- a/Documentation/devicetree/bindings/regulator/tps65090.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65090.txt
@@ -45,8 +45,8 @@ Example:
infet5-supply = <&some_reg>;
infet6-supply = <&some_reg>;
infet7-supply = <&some_reg>;
- vsys_l1-supply = <&some_reg>;
- vsys_l2-supply = <&some_reg>;
+ vsys-l1-supply = <&some_reg>;
+ vsys-l2-supply = <&some_reg>;
regulators {
dcdc1 {
diff --git a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
index 46f344965313..4eb7997674a0 100644
--- a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
+++ b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
@@ -1,7 +1,7 @@
ADI AXI-SPDIF controller
Required properties:
- - compatible : Must be "adi,axi-spdif-1.00.a"
+ - compatible : Must be "adi,axi-spdif-tx-1.00.a"
- reg : Must contain SPDIF core's registers location and length
- clocks : Pairs of phandle and specifier referencing the controller's clocks.
The controller expects two clocks, the clock used for the AXI interface and
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
index 6c55fcfe5e1d..9b82c20b306b 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -31,7 +31,7 @@ i2s@ff890000 {
#address-cells = <1>;
#size-cells = <0>;
dmas = <&pdma1 0>, <&pdma1 1>;
- dma-names = "rx", "tx";
+ dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
};
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
index 7bab35575817..467dec441c62 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -16,11 +16,15 @@ Required Properties:
- clocks: Must contain an entry for each entry in clock-names.
- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
the peripheral clock.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Optional Properties:
+
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: DMA request names should include "tx" and "rx" if present.
-- #address-cells: should be 1.
-- #size-cells: should be 0.
+
Example:
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
index 578a1fca366e..443bcb6134d5 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
@@ -56,6 +56,9 @@ Required properties:
- fsl,data-width : should be <18> or <24>
- port: A port node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
+ On i.MX5, the internal two-input-multiplexer is used.
+ Due to hardware limitations, only one port (port@[0,1])
+ can be used for each channel (lvds-channel@[0,1], respectively)
On i.MX6, there should be four ports (port@[0-3]) that correspond
to the four LVDS multiplexer inputs.
@@ -78,6 +81,8 @@ ldb: ldb@53fa8008 {
"di0", "di1";
lvds-channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0>;
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
@@ -86,7 +91,9 @@ ldb: ldb@53fa8008 {
/* ... */
};
- port {
+ port@0 {
+ reg = <0>;
+
lvds0_in: endpoint {
remote-endpoint = <&ipu_di0_lvds0>;
};
@@ -94,6 +101,8 @@ ldb: ldb@53fa8008 {
};
lvds-channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
@@ -102,7 +111,9 @@ ldb: ldb@53fa8008 {
/* ... */
};
- port {
+ port@1 {
+ reg = <1>;
+
lvds1_in: endpoint {
remote-endpoint = <&ipu_di1_lvds1>;
};
diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
index cef181a9d8bd..96681c93b86d 100644
--- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
+++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
@@ -5,6 +5,7 @@ Required properties:
* "fsl,imx23-usbphy" for imx23 and imx28
* "fsl,imx6q-usbphy" for imx6dq and imx6dl
* "fsl,imx6sl-usbphy" for imx6sl
+ * "fsl,imx6sx-usbphy" for imx6sx
"fsl,imx23-usbphy" is still a fallback for other strings
- reg: Should contain registers location and length
- interrupts: Should contain phy interrupt
diff --git a/Documentation/devicetree/bindings/video/analog-tv-connector.txt b/Documentation/devicetree/bindings/video/analog-tv-connector.txt
index 0218fcdc1299..0c0970c210ab 100644
--- a/Documentation/devicetree/bindings/video/analog-tv-connector.txt
+++ b/Documentation/devicetree/bindings/video/analog-tv-connector.txt
@@ -2,7 +2,7 @@ Analog TV Connector
===================
Required properties:
-- compatible: "composite-connector" or "svideo-connector"
+- compatible: "composite-video-connector" or "svideo-connector"
Optional properties:
- label: a symbolic name for the connector
@@ -14,7 +14,7 @@ Example
-------
tv: connector {
- compatible = "composite-connector";
+ compatible = "composite-video-connector";
label = "tv";
port {
diff --git a/Documentation/devicetree/of_selftest.txt b/Documentation/devicetree/of_selftest.txt
new file mode 100644
index 000000000000..3a2f54d07fc5
--- /dev/null
+++ b/Documentation/devicetree/of_selftest.txt
@@ -0,0 +1,211 @@
+Open Firmware Device Tree Selftest
+----------------------------------
+
+Author: Gaurav Minocha <gaurav.minocha.os@gmail.com>
+
+1. Introduction
+
+This document explains how the test data required for executing OF selftest
+is attached to the live tree dynamically, independent of the machine's
+architecture.
+
+It is recommended to read the following documents before moving ahead.
+
+[1] Documentation/devicetree/usage-model.txt
+[2] http://www.devicetree.org/Device_Tree_Usage
+
+OF Selftest has been designed to test the interface (include/linux/of.h)
+provided to device driver developers to fetch the device information..etc.
+from the unflattened device tree data structure. This interface is used by
+most of the device drivers in various use cases.
+
+
+2. Test-data
+
+The Device Tree Source file (drivers/of/testcase-data/testcases.dts) contains
+the test data required for executing the unit tests automated in
+drivers/of/selftests.c. Currently, following Device Tree Source Include files
+(.dtsi) are included in testcase.dts:
+
+drivers/of/testcase-data/tests-interrupts.dtsi
+drivers/of/testcase-data/tests-platform.dtsi
+drivers/of/testcase-data/tests-phandle.dtsi
+drivers/of/testcase-data/tests-match.dtsi
+
+When the kernel is build with OF_SELFTEST enabled, then the following make rule
+
+$(obj)/%.dtb: $(src)/%.dts FORCE
+ $(call if_changed_dep, dtc)
+
+is used to compile the DT source file (testcase.dts) into a binary blob
+(testcase.dtb), also referred as flattened DT.
+
+After that, using the following rule the binary blob above is wrapped as an
+assembly file (testcase.dtb.S).
+
+$(obj)/%.dtb.S: $(obj)/%.dtb
+ $(call cmd, dt_S_dtb)
+
+The assembly file is compiled into an object file (testcase.dtb.o), and is
+linked into the kernel image.
+
+
+2.1. Adding the test data
+
+Un-flattened device tree structure:
+
+Un-flattened device tree consists of connected device_node(s) in form of a tree
+structure described below.
+
+// following struct members are used to construct the tree
+struct device_node {
+ ...
+ struct device_node *parent;
+ struct device_node *child;
+ struct device_node *sibling;
+ struct device_node *allnext; /* next in list of all nodes */
+ ...
+ };
+
+Figure 1, describes a generic structure of machine’s un-flattened device tree
+considering only child and sibling pointers. There exists another pointer,
+*parent, that is used to traverse the tree in the reverse direction. So, at
+a particular level the child node and all the sibling nodes will have a parent
+pointer pointing to a common node (e.g. child1, sibling2, sibling3, sibling4’s
+parent points to root node)
+
+root (‘/’)
+ |
+child1 -> sibling2 -> sibling3 -> sibling4 -> null
+ | | | |
+ | | | null
+ | | |
+ | | child31 -> sibling32 -> null
+ | | | |
+ | | null null
+ | |
+ | child21 -> sibling22 -> sibling23 -> null
+ | | | |
+ | null null null
+ |
+child11 -> sibling12 -> sibling13 -> sibling14 -> null
+ | | | |
+ | | | null
+ | | |
+ null null child131 -> null
+ |
+ null
+
+Figure 1: Generic structure of un-flattened device tree
+
+
+*allnext: it is used to link all the nodes of DT into a list. So, for the
+ above tree the list would be as follows:
+
+root->child1->child11->sibling12->sibling13->child131->sibling14->sibling2->
+child21->sibling22->sibling23->sibling3->child31->sibling32->sibling4->null
+
+Before executing OF selftest, it is required to attach the test data to
+machine's device tree (if present). So, when selftest_data_add() is called,
+at first it reads the flattened device tree data linked into the kernel image
+via the following kernel symbols:
+
+__dtb_testcases_begin - address marking the start of test data blob
+__dtb_testcases_end - address marking the end of test data blob
+
+Secondly, it calls of_fdt_unflatten_device_tree() to unflatten the flattened
+blob. And finally, if the machine’s device tree (i.e live tree) is present,
+then it attaches the unflattened test data tree to the live tree, else it
+attaches itself as a live device tree.
+
+attach_node_and_children() uses of_attach_node() to attach the nodes into the
+live tree as explained below. To explain the same, the test data tree described
+ in Figure 2 is attached to the live tree described in Figure 1.
+
+root (‘/’)
+ |
+ testcase-data
+ |
+ test-child0 -> test-sibling1 -> test-sibling2 -> test-sibling3 -> null
+ | | | |
+ test-child01 null null null
+
+
+allnext list:
+
+root->testcase-data->test-child0->test-child01->test-sibling1->test-sibling2
+->test-sibling3->null
+
+Figure 2: Example test data tree to be attached to live tree.
+
+According to the scenario above, the live tree is already present so it isn’t
+required to attach the root(‘/’) node. All other nodes are attached by calling
+of_attach_node() on each node.
+
+In the function of_attach_node(), the new node is attached as the child of the
+given parent in live tree. But, if parent already has a child then the new node
+replaces the current child and turns it into its sibling. So, when the testcase
+data node is attached to the live tree above (Figure 1), the final structure is
+ as shown in Figure 3.
+
+root (‘/’)
+ |
+testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+ | | | | |
+ (...) | | | null
+ | | child31 -> sibling32 -> null
+ | | | |
+ | | null null
+ | |
+ | child21 -> sibling22 -> sibling23 -> null
+ | | | |
+ | null null null
+ |
+ child11 -> sibling12 -> sibling13 -> sibling14 -> null
+ | | | |
+ null null | null
+ |
+ child131 -> null
+ |
+ null
+-----------------------------------------------------------------------
+
+root (‘/’)
+ |
+testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+ | | | | |
+ | (...) (...) (...) null
+ |
+test-sibling3 -> test-sibling2 -> test-sibling1 -> test-child0 -> null
+ | | | |
+ null null null test-child01
+
+
+Figure 3: Live device tree structure after attaching the testcase-data.
+
+
+Astute readers would have noticed that test-child0 node becomes the last
+sibling compared to the earlier structure (Figure 2). After attaching first
+test-child0 the test-sibling1 is attached that pushes the child node
+(i.e. test-child0) to become a sibling and makes itself a child node,
+ as mentioned above.
+
+If a duplicate node is found (i.e. if a node with same full_name property is
+already present in the live tree), then the node isn’t attached rather its
+properties are updated to the live tree’s node by calling the function
+update_node_properties().
+
+
+2.2. Removing the test data
+
+Once the test case execution is complete, selftest_data_remove is called in
+order to remove the device nodes attached initially (first the leaf nodes are
+detached and then moving up the parent nodes are removed, and eventually the
+whole tree). selftest_data_remove() calls detach_node_and_children() that uses
+of_detach_node() to detach the nodes from the live device tree.
+
+To detach a node, of_detach_node() first updates all_next linked list, by
+attaching the previous node’s allnext to current node’s allnext pointer. And
+then, it either updates the child pointer of given node’s parent to its
+sibling or attaches the previous sibling to the given node’s sibling, as
+appropriate. That is it :)
diff --git a/Documentation/filesystems/nfs/nfs-rdma.txt b/Documentation/filesystems/nfs/nfs-rdma.txt
index e386f7e4bcee..724043858b08 100644
--- a/Documentation/filesystems/nfs/nfs-rdma.txt
+++ b/Documentation/filesystems/nfs/nfs-rdma.txt
@@ -138,9 +138,9 @@ Installation
- Build, install, reboot
The NFS/RDMA code will be enabled automatically if NFS and RDMA
- are turned on. The NFS/RDMA client and server are configured via the hidden
- SUNRPC_XPRT_RDMA config option that depends on SUNRPC and INFINIBAND. The
- value of SUNRPC_XPRT_RDMA will be:
+ are turned on. The NFS/RDMA client and server are configured via the
+ SUNRPC_XPRT_RDMA_CLIENT and SUNRPC_XPRT_RDMA_SERVER config options that both
+ depend on SUNRPC and INFINIBAND. The default value of both options will be:
- N if either SUNRPC or INFINIBAND are N, in this case the NFS/RDMA client
and server will not be built
@@ -235,8 +235,9 @@ NFS/RDMA Setup
- Start the NFS server
- If the NFS/RDMA server was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
- kernel config), load the RDMA transport module:
+ If the NFS/RDMA server was built as a module
+ (CONFIG_SUNRPC_XPRT_RDMA_SERVER=m in kernel config), load the RDMA
+ transport module:
$ modprobe svcrdma
@@ -255,8 +256,9 @@ NFS/RDMA Setup
- On the client system
- If the NFS/RDMA client was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
- kernel config), load the RDMA client module:
+ If the NFS/RDMA client was built as a module
+ (CONFIG_SUNRPC_XPRT_RDMA_CLIENT=m in kernel config), load the RDMA client
+ module:
$ modprobe xprtrdma.ko
diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt
index 1fe0ccb1af55..8ea3e90ace07 100644
--- a/Documentation/filesystems/seq_file.txt
+++ b/Documentation/filesystems/seq_file.txt
@@ -235,6 +235,39 @@ be used for more than one file, you can store an arbitrary pointer in the
private field of the seq_file structure; that value can then be retrieved
by the iterator functions.
+There is also a wrapper function to seq_open() called seq_open_private(). It
+kmallocs a zero filled block of memory and stores a pointer to it in the
+private field of the seq_file structure, returning 0 on success. The
+block size is specified in a third parameter to the function, e.g.:
+
+ static int ct_open(struct inode *inode, struct file *file)
+ {
+ return seq_open_private(file, &ct_seq_ops,
+ sizeof(struct mystruct));
+ }
+
+There is also a variant function, __seq_open_private(), which is functionally
+identical except that, if successful, it returns the pointer to the allocated
+memory block, allowing further initialisation e.g.:
+
+ static int ct_open(struct inode *inode, struct file *file)
+ {
+ struct mystruct *p =
+ __seq_open_private(file, &ct_seq_ops, sizeof(*p));
+
+ if (!p)
+ return -ENOMEM;
+
+ p->foo = bar; /* initialize my stuff */
+ ...
+ p->baz = true;
+
+ return 0;
+ }
+
+A corresponding close function, seq_release_private() is available which
+frees the memory allocated in the corresponding open.
+
The other operations of interest - read(), llseek(), and release() - are
all implemented by the seq_file code itself. So a virtual file's
file_operations structure will look like:
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index 76546324e968..6ce544191ca6 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -53,7 +53,20 @@ with IS_ERR() (they will never return a NULL pointer). -ENOENT will be returned
if and only if no GPIO has been assigned to the device/function/index triplet,
other error codes are used for cases where a GPIO has been assigned but an error
occurred while trying to acquire it. This is useful to discriminate between mere
-errors and an absence of GPIO for optional GPIO parameters.
+errors and an absence of GPIO for optional GPIO parameters. For the common
+pattern where a GPIO is optional, the gpiod_get_optional() and
+gpiod_get_index_optional() functions can be used. These functions return NULL
+instead of -ENOENT if no GPIO has been assigned to the requested function:
+
+
+ struct gpio_desc *gpiod_get_optional(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags)
+
+ struct gpio_desc *gpiod_get_index_optional(struct device *dev,
+ const char *con_id,
+ unsigned int index,
+ enum gpiod_flags flags)
Device-managed variants of these functions are also defined:
@@ -65,6 +78,15 @@ Device-managed variants of these functions are also defined:
unsigned int idx,
enum gpiod_flags flags)
+ struct gpio_desc *devm_gpiod_get_optional(struct device *dev,
+ const char *con_id,
+ enum gpiod_flags flags)
+
+ struct gpio_desc * devm_gpiod_get_index_optional(struct device *dev,
+ const char *con_id,
+ unsigned int index,
+ enum gpiod_flags flags)
+
A GPIO descriptor can be disposed of using the gpiod_put() function:
void gpiod_put(struct gpio_desc *desc)
diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface
index 3e742ba25536..2ac78ae1039d 100644
--- a/Documentation/i2c/dev-interface
+++ b/Documentation/i2c/dev-interface
@@ -57,12 +57,12 @@ Well, you are all set up now. You can now use SMBus commands or plain
I2C to communicate with your device. SMBus commands are preferred if
the device supports them. Both are illustrated below.
- __u8 register = 0x10; /* Device register to access */
+ __u8 reg = 0x10; /* Device register to access */
__s32 res;
char buf[10];
/* Using SMBus commands */
- res = i2c_smbus_read_word_data(file, register);
+ res = i2c_smbus_read_word_data(file, reg);
if (res < 0) {
/* ERROR HANDLING: i2c transaction failed */
} else {
@@ -70,11 +70,11 @@ the device supports them. Both are illustrated below.
}
/* Using I2C Write, equivalent of
- i2c_smbus_write_word_data(file, register, 0x6543) */
- buf[0] = register;
+ i2c_smbus_write_word_data(file, reg, 0x6543) */
+ buf[0] = reg;
buf[1] = 0x43;
buf[2] = 0x65;
- if (write(file, buf, 3) ! =3) {
+ if (write(file, buf, 3) != 3) {
/* ERROR HANDLING: i2c transaction failed */
}
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5ae8608ca9f5..10d51c2f10d7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3541,6 +3541,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
bogus residue values);
s = SINGLE_LUN (the device has only one
Logical Unit);
+ u = IGNORE_UAS (don't bind to the uas driver);
w = NO_WP_DETECT (don't test whether the
medium is write-protected).
Example: quirks=0419:aaf5:rl,0421:0433:rc
diff --git a/Documentation/misc-devices/lis3lv02d b/Documentation/misc-devices/lis3lv02d
index af815b9ba413..f89960a0ff95 100644
--- a/Documentation/misc-devices/lis3lv02d
+++ b/Documentation/misc-devices/lis3lv02d
@@ -59,7 +59,7 @@ acts similar to /dev/rtc and reacts on free-fall interrupts received
from the device. It supports blocking operations, poll/select and
fasync operation modes. You must read 1 bytes from the device. The
result is number of free-fall interrupts since the last successful
-read (or 255 if number of interrupts would not fit). See the hpfall.c
+read (or 255 if number of interrupts would not fit). See the freefall.c
file for an example on using the device.
diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt
index c48a9704bda8..d16f424c5e8d 100644
--- a/Documentation/networking/filter.txt
+++ b/Documentation/networking/filter.txt
@@ -462,9 +462,9 @@ JIT compiler
------------
The Linux kernel has a built-in BPF JIT compiler for x86_64, SPARC, PowerPC,
-ARM and s390 and can be enabled through CONFIG_BPF_JIT. The JIT compiler is
-transparently invoked for each attached filter from user space or for internal
-kernel users if it has been previously enabled by root:
+ARM, MIPS and s390 and can be enabled through CONFIG_BPF_JIT. The JIT compiler
+is transparently invoked for each attached filter from user space or for
+internal kernel users if it has been previously enabled by root:
echo 1 > /proc/sys/net/core/bpf_jit_enable
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
index 81c0e2b49cd8..8afb236ca765 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.txt
@@ -143,8 +143,9 @@ This will cause the core to recalculate the total load on the regulator (based
on all its consumers) and change operating mode (if necessary and permitted)
to best match the current operating load.
-The load_uA value can be determined from the consumers datasheet. e.g.most
-datasheets have tables showing the max current consumed in certain situations.
+The load_uA value can be determined from the consumer's datasheet. e.g. most
+datasheets have tables showing the maximum current consumed in certain
+situations.
Most consumers will use indirect operating mode control since they have no
knowledge of the regulator or whether the regulator is shared with other
@@ -173,7 +174,7 @@ Consumers can register interest in regulator events by calling :-
int regulator_register_notifier(struct regulator *regulator,
struct notifier_block *nb);
-Consumers can uregister interest by calling :-
+Consumers can unregister interest by calling :-
int regulator_unregister_notifier(struct regulator *regulator,
struct notifier_block *nb);
diff --git a/Documentation/power/regulator/design.txt b/Documentation/power/regulator/design.txt
index f9b56b72b782..fdd919b96830 100644
--- a/Documentation/power/regulator/design.txt
+++ b/Documentation/power/regulator/design.txt
@@ -9,14 +9,14 @@ Safety
- Errors in regulator configuration can have very serious consequences
for the system, potentially including lasting hardware damage.
- - It is not possible to automatically determine the power confugration
+ - It is not possible to automatically determine the power configuration
of the system - software-equivalent variants of the same chip may
- have different power requirments, and not all components with power
+ have different power requirements, and not all components with power
requirements are visible to software.
=> The API should make no changes to the hardware state unless it has
- specific knowledge that these changes are safe to do perform on
- this particular system.
+ specific knowledge that these changes are safe to perform on this
+ particular system.
Consumer use cases
------------------
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
index ce63af0a8e35..757e3b53dc11 100644
--- a/Documentation/power/regulator/machine.txt
+++ b/Documentation/power/regulator/machine.txt
@@ -11,7 +11,7 @@ Consider the following machine :-
+-> [Consumer B @ 3.3V]
The drivers for consumers A & B must be mapped to the correct regulator in
-order to control their power supply. This mapping can be achieved in machine
+order to control their power supplies. This mapping can be achieved in machine
initialisation code by creating a struct regulator_consumer_supply for
each regulator.
@@ -39,7 +39,7 @@ to the 'Vcc' supply for Consumer A.
Constraints can now be registered by defining a struct regulator_init_data
for each regulator power domain. This structure also maps the consumers
-to their supply regulator :-
+to their supply regulators :-
static struct regulator_init_data regulator1_data = {
.constraints = {
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index 8ed17587a74b..40ca2d6e2742 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -36,11 +36,11 @@ Some terms used in this document:-
Consumers can be classified into two types:-
Static: consumer does not change its supply voltage or
- current limit. It only needs to enable or disable it's
+ current limit. It only needs to enable or disable its
power supply. Its supply voltage is set by the hardware,
bootloader, firmware or kernel board initialisation code.
- Dynamic: consumer needs to change it's supply voltage or
+ Dynamic: consumer needs to change its supply voltage or
current limit to meet operation demands.
@@ -156,7 +156,7 @@ relevant to non SoC devices and is split into the following four interfaces:-
This interface is for machine specific code and allows the creation of
voltage/current domains (with constraints) for each regulator. It can
provide regulator constraints that will prevent device damage through
- overvoltage or over current caused by buggy client drivers. It also
+ overvoltage or overcurrent caused by buggy client drivers. It also
allows the creation of a regulator tree whereby some regulators are
supplied by others (similar to a clock tree).
diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt
index 13902778ae44..b17e5833ce21 100644
--- a/Documentation/power/regulator/regulator.txt
+++ b/Documentation/power/regulator/regulator.txt
@@ -13,7 +13,7 @@ Drivers can register a regulator by calling :-
struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
const struct regulator_config *config);
-This will register the regulators capabilities and operations to the regulator
+This will register the regulator's capabilities and operations to the regulator
core.
Regulators can be unregistered by calling :-
@@ -23,8 +23,8 @@ void regulator_unregister(struct regulator_dev *rdev);
Regulator Events
================
-Regulators can send events (e.g. over temp, under voltage, etc) to consumer
-drivers by calling :-
+Regulators can send events (e.g. overtemperature, undervoltage, etc) to
+consumer drivers by calling :-
int regulator_notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data);