diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/admin-guide/perf/arm-cmn.rst | 65 | ||||
-rw-r--r-- | Documentation/admin-guide/perf/index.rst | 1 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/perf/arm,cmn.yaml | 57 |
3 files changed, 123 insertions, 0 deletions
diff --git a/Documentation/admin-guide/perf/arm-cmn.rst b/Documentation/admin-guide/perf/arm-cmn.rst new file mode 100644 index 000000000000..0e4809346014 --- /dev/null +++ b/Documentation/admin-guide/perf/arm-cmn.rst @@ -0,0 +1,65 @@ +============================= +Arm Coherent Mesh Network PMU +============================= + +CMN-600 is a configurable mesh interconnect consisting of a rectangular +grid of crosspoints (XPs), with each crosspoint supporting up to two +device ports to which various AMBA CHI agents are attached. + +CMN implements a distributed PMU design as part of its debug and trace +functionality. This consists of a local monitor (DTM) at every XP, which +counts up to 4 event signals from the connected device nodes and/or the +XP itself. Overflow from these local counters is accumulated in up to 8 +global counters implemented by the main controller (DTC), which provides +overall PMU control and interrupts for global counter overflow. + +PMU events +---------- + +The PMU driver registers a single PMU device for the whole interconnect, +see /sys/bus/event_source/devices/arm_cmn. Multi-chip systems may link +more than one CMN together via external CCIX links - in this situation, +each mesh counts its own events entirely independently, and additional +PMU devices will be named arm_cmn_{1..n}. + +Most events are specified in a format based directly on the TRM +definitions - "type" selects the respective node type, and "eventid" the +event number. Some events require an additional occupancy ID, which is +specified by "occupid". + +* Since RN-D nodes do not have any distinct events from RN-I nodes, they + are treated as the same type (0xa), and the common event templates are + named "rnid_*". + +* The cycle counter is treated as a synthetic event belonging to the DTC + node ("type" == 0x3, "eventid" is ignored). + +* XP events also encode the port and channel in the "eventid" field, to + match the underlying pmu_event0_id encoding for the pmu_event_sel + register. The event templates are named with prefixes to cover all + permutations. + +By default each event provides an aggregate count over all nodes of the +given type. To target a specific node, "bynodeid" must be set to 1 and +"nodeid" to the appropriate value derived from the CMN configuration +(as defined in the "Node ID Mapping" section of the TRM). + +Watchpoints +----------- + +The PMU can also count watchpoint events to monitor specific flit +traffic. Watchpoints are treated as a synthetic event type, and like PMU +events can be global or targeted with a particular XP's "nodeid" value. +Since the watchpoint direction is otherwise implicit in the underlying +register selection, separate events are provided for flit uploads and +downloads. + +The flit match value and mask are passed in config1 and config2 ("val" +and "mask" respectively). "wp_dev_sel", "wp_chn_sel", "wp_grp" and +"wp_exclusive" are specified per the TRM definitions for dtm_wp_config0. +Where a watchpoint needs to match fields from both match groups on the +REQ or SNP channel, it can be specified as two events - one for each +group - with the same nonzero "combine" value. The count for such a +pair of combined events will be attributed to the primary match. +Watchpoint events with a "combine" value of 0 are considered independent +and will count individually. diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst index 47c99f40cc16..5a8f2529a033 100644 --- a/Documentation/admin-guide/perf/index.rst +++ b/Documentation/admin-guide/perf/index.rst @@ -12,6 +12,7 @@ Performance monitor support qcom_l2_pmu qcom_l3_pmu arm-ccn + arm-cmn xgene-pmu arm_dsu_pmu thunderx2-pmu diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml new file mode 100644 index 000000000000..e4fcc0de25e2 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2020 Arm Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/arm,cmn.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CMN (Coherent Mesh Network) Performance Monitors + +maintainers: + - Robin Murphy <robin.murphy@arm.com> + +properties: + compatible: + const: arm,cmn-600 + + reg: + items: + - description: Physical address of the base (PERIPHBASE) and + size (up to 64MB) of the configuration address space. + + interrupts: + minItems: 1 + maxItems: 4 + items: + - description: Overflow interrupt for DTC0 + - description: Overflow interrupt for DTC1 + - description: Overflow interrupt for DTC2 + - description: Overflow interrupt for DTC3 + description: One interrupt for each DTC domain implemented must + be specified, in order. DTC0 is always present. + + arm,root-node: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset from PERIPHBASE of the configuration + discovery node (see TRM definition of ROOTNODEBASE). + +required: + - compatible + - reg + - interrupts + - arm,root-node + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + pmu@50000000 { + compatible = "arm,cmn-600"; + reg = <0x50000000 0x4000000>; + /* 4x2 mesh with one DTC, and CFG node at 0,1,1,0 */ + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + arm,root-node = <0x104000>; + }; +... |