diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/ABI/stable/sysfs-bus-xen-backend | 9 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-xen-blkback | 10 | ||||
| -rw-r--r-- | Documentation/arm64/sve.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt | 14 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/watchdog/renesas-wdt.txt | 5 | ||||
| -rw-r--r-- | Documentation/hwmon/ina2xx | 2 | ||||
| -rw-r--r-- | Documentation/i2c/DMA-considerations | 10 |
7 files changed, 43 insertions, 11 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-xen-backend b/Documentation/ABI/stable/sysfs-bus-xen-backend index 3d5951c8bf5f..e8b60bd766f7 100644 --- a/Documentation/ABI/stable/sysfs-bus-xen-backend +++ b/Documentation/ABI/stable/sysfs-bus-xen-backend @@ -73,3 +73,12 @@ KernelVersion: 3.0 Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Description: Number of sectors written by the frontend. + +What: /sys/bus/xen-backend/devices/*/state +Date: August 2018 +KernelVersion: 4.19 +Contact: Joe Jin <joe.jin@oracle.com> +Description: + The state of the device. One of: 'Unknown', + 'Initialising', 'Initialised', 'Connected', 'Closing', + 'Closed', 'Reconfiguring', 'Reconfigured'. diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkback b/Documentation/ABI/testing/sysfs-driver-xen-blkback index 8bb43b66eb55..4e7babb3ba1f 100644 --- a/Documentation/ABI/testing/sysfs-driver-xen-blkback +++ b/Documentation/ABI/testing/sysfs-driver-xen-blkback @@ -15,3 +15,13 @@ Description: blkback. If the frontend tries to use more than max_persistent_grants, the LRU kicks in and starts removing 5% of max_persistent_grants every 100ms. + +What: /sys/module/xen_blkback/parameters/persistent_grant_unused_seconds +Date: August 2018 +KernelVersion: 4.19 +Contact: Roger Pau Monné <roger.pau@citrix.com> +Description: + How long a persistent grant is allowed to remain + allocated without being in use. The time is in + seconds, 0 means indefinitely long. + The default is 60 seconds. diff --git a/Documentation/arm64/sve.txt b/Documentation/arm64/sve.txt index f128f736b4a5..7169a0ec41d8 100644 --- a/Documentation/arm64/sve.txt +++ b/Documentation/arm64/sve.txt @@ -200,7 +200,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg) thread. * Changing the vector length causes all of P0..P15, FFR and all bits of - Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become + Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become unspecified. Calling PR_SVE_SET_VL with vl equal to the thread's current vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC flag, does not constitute a change to the vector length for this purpose. @@ -500,7 +500,7 @@ References [2] arch/arm64/include/uapi/asm/ptrace.h AArch64 Linux ptrace ABI definitions -[3] linux/Documentation/arm64/cpu-feature-registers.txt +[3] Documentation/arm64/cpu-feature-registers.txt [4] ARM IHI0055C http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt index b0a8af51c388..265b223cd978 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt @@ -11,7 +11,7 @@ The RISC-V supervisor ISA manual specifies three interrupt sources that are attached to every HLIC: software interrupts, the timer interrupt, and external interrupts. Software interrupts are used to send IPIs between cores. The timer interrupt comes from an architecturally mandated real-time timer that is -controller via Supervisor Binary Interface (SBI) calls and CSR reads. External +controlled via Supervisor Binary Interface (SBI) calls and CSR reads. External interrupts connect all other device interrupts to the HLIC, which are routed via the platform-level interrupt controller (PLIC). @@ -25,7 +25,15 @@ in the system. Required properties: - compatible : "riscv,cpu-intc" -- #interrupt-cells : should be <1> +- #interrupt-cells : should be <1>. The interrupt sources are defined by the + RISC-V supervisor ISA manual, with only the following three interrupts being + defined for supervisor mode: + - Source 1 is the supervisor software interrupt, which can be sent by an SBI + call and is reserved for use by software. + - Source 5 is the supervisor timer interrupt, which can be configured by + SBI calls and implements a one-shot timer. + - Source 9 is the supervisor external interrupt, which chains to all other + device interrupts. - interrupt-controller : Identifies the node as an interrupt controller Furthermore, this interrupt-controller MUST be embedded inside the cpu @@ -38,7 +46,7 @@ An example device tree entry for a HLIC is show below. ... cpu1-intc: interrupt-controller { #interrupt-cells = <1>; - compatible = "riscv,cpu-intc", "sifive,fu540-c000-cpu-intc"; + compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc"; interrupt-controller; }; }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt index 5d47a262474c..9407212a85a8 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt @@ -7,6 +7,7 @@ Required properties: Examples with soctypes are: - "renesas,r8a7743-wdt" (RZ/G1M) - "renesas,r8a7745-wdt" (RZ/G1E) + - "renesas,r8a774a1-wdt" (RZ/G2M) - "renesas,r8a7790-wdt" (R-Car H2) - "renesas,r8a7791-wdt" (R-Car M2-W) - "renesas,r8a7792-wdt" (R-Car V2H) @@ -21,8 +22,8 @@ Required properties: - "renesas,r7s72100-wdt" (RZ/A1) The generic compatible string must be: - "renesas,rza-wdt" for RZ/A - - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G - - "renesas,rcar-gen3-wdt" for R-Car Gen3 + - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G1 + - "renesas,rcar-gen3-wdt" for R-Car Gen3 and RZ/G2 - reg : Should contain WDT registers location and length - clocks : the clock feeding the watchdog timer. diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index 72d16f08e431..b8df81f6d6bc 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -32,7 +32,7 @@ Supported chips: Datasheet: Publicly available at the Texas Instruments website http://www.ti.com/ -Author: Lothar Felten <l-felten@ti.com> +Author: Lothar Felten <lothar.felten@gmail.com> Description ----------- diff --git a/Documentation/i2c/DMA-considerations b/Documentation/i2c/DMA-considerations index 966610aa4620..203002054120 100644 --- a/Documentation/i2c/DMA-considerations +++ b/Documentation/i2c/DMA-considerations @@ -50,10 +50,14 @@ bounce buffer. But you don't need to care about that detail, just use the returned buffer. If NULL is returned, the threshold was not met or a bounce buffer could not be allocated. Fall back to PIO in that case. -In any case, a buffer obtained from above needs to be released. It ensures data -is copied back to the message and a potentially used bounce buffer is freed:: +In any case, a buffer obtained from above needs to be released. Another helper +function ensures a potentially used bounce buffer is freed:: - i2c_release_dma_safe_msg_buf(msg, dma_buf); + i2c_put_dma_safe_msg_buf(dma_buf, msg, xferred); + +The last argument 'xferred' controls if the buffer is synced back to the +message or not. No syncing is needed in cases setting up DMA had an error and +there was no data transferred. The bounce buffer handling from the core is generic and simple. It will always allocate a new bounce buffer. If you want a more sophisticated handling (e.g. |