diff options
Diffstat (limited to 'Documentation/hwmon')
| -rw-r--r-- | Documentation/hwmon/w83781d | 18 |
1 files changed, 6 insertions, 12 deletions
diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d index dbeadb269a69..6f800a0283e9 100644 --- a/Documentation/hwmon/w83781d +++ b/Documentation/hwmon/w83781d @@ -14,10 +14,6 @@ Supported chips: Prefix: 'w83783s' Addresses scanned: I2C 0x2d Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf - * Winbond W83627HF - Prefix: 'w83627hf' - Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) - Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf * Asus AS99127F Prefix: 'as99127f' Addresses scanned: I2C 0x28 - 0x2f @@ -50,20 +46,18 @@ force_subclients=bus,caddr,saddr,saddr Description ----------- -This driver implements support for the Winbond W83781D, W83782D, W83783S, -W83627HF chips, and the Asus AS99127F chips. We will refer to them -collectively as W8378* chips. +This driver implements support for the Winbond W83781D, W83782D, W83783S +chips, and the Asus AS99127F chips. We will refer to them collectively as +W8378* chips. There is quite some difference between these chips, but they are similar enough that it was sensible to put them together in one driver. -The W83627HF chip is assumed to be identical to the ISA W83782D. The Asus chips are similar to an I2C-only W83782D. Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA as99127f 7 3 0 3 0x31 0x12c3 yes no as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes -w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC) w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no @@ -143,9 +137,9 @@ Individual alarm and beep bits: 0x000400: in6 0x000800: fan3 0x001000: chassis -0x002000: temp3 (W83782D and W83627HF only) -0x010000: in7 (W83782D and W83627HF only) -0x020000: in8 (W83782D and W83627HF only) +0x002000: temp3 (W83782D only) +0x010000: in7 (W83782D only) +0x020000: in8 (W83782D only) If an alarm triggers, it will remain triggered until the hardware register is read at least once. This means that the cause for the alarm may |