diff options
Diffstat (limited to 'Documentation/devicetree')
| -rw-r--r-- | Documentation/devicetree/bindings/rtc/isil,isl1219.txt | 29 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/rtc/rtc-ds1307.txt | 1 |
2 files changed, 30 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1219.txt b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt new file mode 100644 index 000000000000..c3efd48e91c2 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt @@ -0,0 +1,29 @@ +Intersil ISL1219 I2C RTC/Alarm chip with event in + +ISL1219 has additional pins EVIN and #EVDET for tamper detection. + +Required properties supported by the device: + + - "compatible": must be "isil,isl1219" + - "reg": I2C bus address of the device + +Optional properties: + + - "interrupt-names": list which may contains "irq" and "evdet" + - "interrupts": list of interrupts for "irq" and "evdet" + - "isil,ev-evienb": if present EV.EVIENB bit is set to the specified + value for proper operation. + + +Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 + and #EVDET pin connected to SoC gpio2 pin 24: + + isl1219: rtc@68 { + compatible = "isil,isl1219"; + reg = <0x68>; + interrupt-names = "irq", "evdet"; + interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, + <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; + isil,ev-evienb = <1>; + }; + diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt index 226cc93df875..eebfbe04207a 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt @@ -13,6 +13,7 @@ Required properties: "maxim,ds3231", "st,m41t0", "st,m41t00", + "st,m41t11", "microchip,mcp7940x", "microchip,mcp7941x", "pericom,pt7c4338", |