diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
18 files changed, 156 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt index c7179d3b5c33..812163060fa3 100644 --- a/Documentation/devicetree/bindings/clock/uniphier-clock.txt +++ b/Documentation/devicetree/bindings/clock/uniphier-clock.txt @@ -24,7 +24,7 @@ Example: reg = <0x61840000 0x4000>; clock { - compatible = "socionext,uniphier-ld20-clock"; + compatible = "socionext,uniphier-ld11-clock"; #clock-cells = <1>; }; @@ -43,8 +43,8 @@ Provided clocks: 21: USB3 ch1 PHY1 -Media I/O (MIO) clock ---------------------- +Media I/O (MIO) clock, SD clock +------------------------------- Required properties: - compatible: should be one of the following: @@ -52,10 +52,10 @@ Required properties: "socionext,uniphier-ld4-mio-clock" - for LD4 SoC. "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC. "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-mio-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-mio-clock" - for PXs2/LD6b SoC. + "socionext,uniphier-pro5-sd-clock" - for Pro5 SoC. + "socionext,uniphier-pxs2-sd-clock" - for PXs2/LD6b SoC. "socionext,uniphier-ld11-mio-clock" - for LD11 SoC. - "socionext,uniphier-ld20-mio-clock" - for LD20 SoC. + "socionext,uniphier-ld20-sd-clock" - for LD20 SoC. - #clock-cells: should be 1. Example: @@ -66,7 +66,7 @@ Example: reg = <0x59810000 0x800>; clock { - compatible = "socionext,uniphier-ld20-mio-clock"; + compatible = "socionext,uniphier-ld11-mio-clock"; #clock-cells = <1>; }; @@ -112,7 +112,7 @@ Example: reg = <0x59820000 0x200>; clock { - compatible = "socionext,uniphier-ld20-peri-clock"; + compatible = "socionext,uniphier-ld11-peri-clock"; #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt new file mode 100644 index 000000000000..6f28969af9dc --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt @@ -0,0 +1,23 @@ +* Aspeed BT (Block Transfer) IPMI interface + +The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs +(BaseBoard Management Controllers) and the BT interface can be used to +perform in-band IPMI communication with their host. + +Required properties: + +- compatible : should be "aspeed,ast2400-ibt-bmc" +- reg: physical address and size of the registers + +Optional properties: + +- interrupts: interrupt generated by the BT interface. without an + interrupt, the driver will operate in poll mode. + +Example: + + ibt@1e789140 { + compatible = "aspeed,ast2400-ibt-bmc"; + reg = <0x1e789140 0x18>; + interrupts = <8>; + }; diff --git a/Documentation/devicetree/bindings/ipmi.txt b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt index d5f1a877ed3e..d5f1a877ed3e 100644 --- a/Documentation/devicetree/bindings/ipmi.txt +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt index 2ad44f7e4880..9c16d51cc15b 100644 --- a/Documentation/devicetree/bindings/mfd/max77620.txt +++ b/Documentation/devicetree/bindings/mfd/max77620.txt @@ -106,6 +106,18 @@ Here supported time periods by device in microseconds are as follows: MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds. MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. +-maxim,power-ok-control: configure map power ok bit + 1: Enables POK(Power OK) to control nRST_IO and GPIO1 + POK function. + 0: Disables POK control. + if property missing, do not configure MPOK bit. + If POK mapping is enabled for GPIO1/nRST_IO then, + GPIO1/nRST_IO pins are HIGH only if all rails + that have POK control enabled are HIGH. + If any of the rails goes down(which are enabled for POK + control) then, GPIO1/nRST_IO goes LOW. + this property is valid for max20024 only. + For DT binding details of different sub modules like GPIO, pincontrol, regulator, power, please refer respective device-tree binding document under their respective sub-system directories. diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt index d3705612a846..9cfa886fe99f 100644 --- a/Documentation/devicetree/bindings/mfd/tps65086.txt +++ b/Documentation/devicetree/bindings/mfd/tps65086.txt @@ -23,7 +23,7 @@ Required properties: defined below. Optional regulator properties: - - ti,regulator-step-size-25mv : This is applicable for buck[1,2,6], set this + - ti,regulator-step-size-25mv : This is applicable for buck[1-6], set this if the regulator is factory set with a 25mv step voltage mapping. - ti,regulator-decay : This is applicable for buck[1-6], set this if diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 4e00e859e885..bfa461aaac99 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -43,6 +43,9 @@ Optional properties: reset signal present internally in some host controller IC designs. See Documentation/devicetree/bindings/reset/reset.txt for details. +* reset-names: request name for using "resets" property. Must be "reset". + (It will be used together with "resets" property.) + * clocks: from common clock binding: handle to biu and ciu clocks for the bus interface unit clock and the card interface unit clock. @@ -103,6 +106,8 @@ board specific portions as listed below. interrupts = <0 75 0>; #address-cells = <1>; #size-cells = <0>; + resets = <&rst 20>; + reset-names = "reset"; }; [board specific internal DMA resources] diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index e1d76812419c..05150957ecfd 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -9,10 +9,26 @@ The following properties are common to the Ethernet controllers: - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in ePAPR). -- phy-mode: string, operation mode of the PHY interface; supported values are - "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", - "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii", "trgmii"; this is now a - de-facto standard property; +- phy-mode: string, operation mode of the PHY interface. This is now a de-facto + standard property; supported values are: + * "mii" + * "gmii" + * "sgmii" + * "qsgmii" + * "tbi" + * "rev-mii" + * "rmii" + * "rgmii" (RX and TX delays are added by the MAC when required) + * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the + MAC should not add the RX or TX delays in this case) + * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC + should not add an RX delay in this case) + * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC + should not add an TX delay in this case) + * "rtbi" + * "smii" + * "xgmii" + * "trgmii" - phy-connection-type: the same as "phy-mode" property but described in ePAPR; - phy-handle: phandle, specifies a reference to a node representing a PHY device; this property is described in ePAPR and so preferred; diff --git a/Documentation/devicetree/bindings/net/marvell-orion-net.txt b/Documentation/devicetree/bindings/net/marvell-orion-net.txt index bce52b2ec55e..6fd988c84c4f 100644 --- a/Documentation/devicetree/bindings/net/marvell-orion-net.txt +++ b/Documentation/devicetree/bindings/net/marvell-orion-net.txt @@ -49,6 +49,7 @@ Optional port properties: and - phy-handle: See ethernet.txt file in the same directory. + - phy-mode: See ethernet.txt file in the same directory. or diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt index ba67b39939c1..71aeda1ca055 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt @@ -26,13 +26,16 @@ Required properties: - "sys" - "legacy" - "client" -- resets: Must contain five entries for each entry in reset-names. +- resets: Must contain seven entries for each entry in reset-names. See ../reset/reset.txt for details. - reset-names: Must include the following names - "core" - "mgmt" - "mgmt-sticky" - "pipe" + - "pm" + - "aclk" + - "pclk" - pinctrl-names : The pin control state names - pinctrl-0: The "default" pinctrl state - #interrupt-cells: specifies the number of cells needed to encode an @@ -86,8 +89,10 @@ pcie0: pcie@f8000000 { reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>; reg-names = "axi-base", "apb-base"; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; phys = <&pcie_phy>; phy-names = "pcie-phy"; pinctrl-names = "default"; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt index 5e60ad18f147..2ad18c4ea55c 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt @@ -43,7 +43,9 @@ aspeed,ast2500-pinctrl, aspeed,g5-pinctrl: GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8 I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 -RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 +RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6 +TIMER7 TIMER8 VGABIOSROM + Examples: diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index f9753c416974..b24583aa34c3 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -14,11 +14,6 @@ Required properies: - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to gpio-bank node (children). - - interrupt-parent: phandle of the interrupt parent to which the external - GPIO interrupts are forwarded to. - - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node - which includes IRQ mux selection register, and the offset of the IRQ mux - selection register. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins. @@ -37,6 +32,11 @@ Required properties: Optional properties: - reset: : Reference to the reset controller + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node + which includes IRQ mux selection register, and the offset of the IRQ mux + selection register. Example: #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt index 3aeba9f86ed8..bf85aa9ad6a7 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -59,7 +59,7 @@ Any property defined as part of the core regulator binding can also be used. Continuous Voltage With Enable GPIO Example: pwm_regulator { - compatible = "pwm-regulator; + compatible = "pwm-regulator"; pwms = <&pwm1 0 8448 0>; enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; regulator-min-microvolt = <1016000>; @@ -76,7 +76,7 @@ Continuous Voltage With Enable GPIO Example: Voltage Table Example: pwm_regulator { - compatible = "pwm-regulator; + compatible = "pwm-regulator"; pwms = <&pwm1 0 8448 0>; regulator-min-microvolt = <1016000>; regulator-max-microvolt = <1114000>; diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index e6bbfccd56c3..5020524cddeb 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -6,25 +6,25 @@ System reset Required properties: - compatible: should be one of the following: - "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC. - "socionext,uniphier-ld4-reset" - for PH1-LD4 SoC. - "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC. - "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC. - "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC. - "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC. - "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC. - "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC. + "socionext,uniphier-sld3-reset" - for sLD3 SoC. + "socionext,uniphier-ld4-reset" - for LD4 SoC. + "socionext,uniphier-pro4-reset" - for Pro4 SoC. + "socionext,uniphier-sld8-reset" - for sLD8 SoC. + "socionext,uniphier-pro5-reset" - for Pro5 SoC. + "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC. + "socionext,uniphier-ld11-reset" - for LD11 SoC. + "socionext,uniphier-ld20-reset" - for LD20 SoC. - #reset-cells: should be 1. Example: sysctrl@61840000 { - compatible = "socionext,uniphier-ld20-sysctrl", + compatible = "socionext,uniphier-ld11-sysctrl", "simple-mfd", "syscon"; reg = <0x61840000 0x4000>; reset { - compatible = "socionext,uniphier-ld20-reset"; + compatible = "socionext,uniphier-ld11-reset"; #reset-cells = <1>; }; @@ -32,30 +32,30 @@ Example: }; -Media I/O (MIO) reset ---------------------- +Media I/O (MIO) reset, SD reset +------------------------------- Required properties: - compatible: should be one of the following: - "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC. - "socionext,uniphier-ld4-mio-reset" - for PH1-LD4 SoC. - "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC. - "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC. - "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC. - "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC. - "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC. - "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC. + "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC. + "socionext,uniphier-ld4-mio-reset" - for LD4 SoC. + "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC. + "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC. + "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC. + "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC. + "socionext,uniphier-ld11-mio-reset" - for LD11 SoC. + "socionext,uniphier-ld20-sd-reset" - for LD20 SoC. - #reset-cells: should be 1. Example: mioctrl@59810000 { - compatible = "socionext,uniphier-ld20-mioctrl", + compatible = "socionext,uniphier-ld11-mioctrl", "simple-mfd", "syscon"; reg = <0x59810000 0x800>; reset { - compatible = "socionext,uniphier-ld20-mio-reset"; + compatible = "socionext,uniphier-ld11-mio-reset"; #reset-cells = <1>; }; @@ -68,24 +68,24 @@ Peripheral reset Required properties: - compatible: should be one of the following: - "socionext,uniphier-ld4-peri-reset" - for PH1-LD4 SoC. - "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC. - "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC. - "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC. - "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC. - "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC. - "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC. + "socionext,uniphier-ld4-peri-reset" - for LD4 SoC. + "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC. + "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC. + "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC. + "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC. + "socionext,uniphier-ld11-peri-reset" - for LD11 SoC. + "socionext,uniphier-ld20-peri-reset" - for LD20 SoC. - #reset-cells: should be 1. Example: perictrl@59820000 { - compatible = "socionext,uniphier-ld20-perictrl", + compatible = "socionext,uniphier-ld11-perictrl", "simple-mfd", "syscon"; reg = <0x59820000 0x200>; reset { - compatible = "socionext,uniphier-ld20-peri-reset"; + compatible = "socionext,uniphier-ld11-peri-reset"; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.txt b/Documentation/devicetree/bindings/serial/cdns,uart.txt index a3eb154c32ca..227bb770b027 100644 --- a/Documentation/devicetree/bindings/serial/cdns,uart.txt +++ b/Documentation/devicetree/bindings/serial/cdns,uart.txt @@ -1,7 +1,9 @@ Binding for Cadence UART Controller Required properties: -- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps" +- compatible : + Use "xlnx,xuartps","cdns,uart-r1p8" for Zynq-7xxx SoC. + Use "xlnx,zynqmp-uart","cdns,uart-r1p12" for Zynq Ultrascale+ MPSoC. - reg: Should contain UART controller registers location and length. - interrupts: Should contain UART controller interrupts. - clocks: Must contain phandles to the UART clocks diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 1e4000d83aee..8d27d1a603e7 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -9,6 +9,14 @@ Required properties: - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART. - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART. - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART. + - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART. + - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART. + - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART. + - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART. + - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART. + - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART. + - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART. + - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt index fd40c852d7c7..462b04e8209f 100644 --- a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt +++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt @@ -12,7 +12,7 @@ Required properties: Optional properties: - ti,dmic: phandle for the OMAP dmic node if the machine have it connected -- ti,jack_detection: Need to be present if the board capable to detect jack +- ti,jack-detection: Need to be present if the board capable to detect jack insertion, removal. Available audio endpoints for the audio-routing table: diff --git a/Documentation/devicetree/bindings/timer/jcore,pit.txt b/Documentation/devicetree/bindings/timer/jcore,pit.txt new file mode 100644 index 000000000000..af5dd35469d7 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/jcore,pit.txt @@ -0,0 +1,24 @@ +J-Core Programmable Interval Timer and Clocksource + +Required properties: + +- compatible: Must be "jcore,pit". + +- reg: Memory region(s) for timer/clocksource registers. For SMP, + there should be one region per cpu, indexed by the sequential, + zero-based hardware cpu number. + +- interrupts: An interrupt to assign for the timer. The actual pit + core is integrated with the aic and allows the timer interrupt + assignment to be programmed by software, but this property is + required in order to reserve an interrupt number that doesn't + conflict with other devices. + + +Example: + +timer@200 { + compatible = "jcore,pit"; + reg = < 0x200 0x30 0x500 0x30 >; + interrupts = < 0x48 >; +}; diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 455f2c310a1b..2c30a5479069 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -28,10 +28,7 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties - g-use-dma: enable dma usage in gadget driver. - g-rx-fifo-size: size of rx fifo size in gadget mode. - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. - -Deprecated properties: -- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) - in gadget mode. +- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. Example: |