diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
| -rw-r--r-- | Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt | 29 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt | 3 |
2 files changed, 28 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt index 7e675dafc256..3a76d8faaaed 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt @@ -4,17 +4,27 @@ This node provides properties for configuring the MediaTek mt76xx wireless device. The node is expected to be specified as a child node of the PCI controller to which the wireless chip is connected. -Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC. -For SoC, use the compatible string "mediatek,mt7628-wmac" and the following -properties: +Alternatively, it can specify the wireless part of the MT7628/MT7688 or +MT7622 SoC. For SoC, use the following compatible strings: + +compatible: +- "mediatek,mt7628-wmac" for MT7628/MT7688 +- "mediatek,mt7622-wmac" for MT7622 +properties: - reg: Address and length of the register set for the device. - interrupts: Main device interrupt +MT7622 specific properties: +- power-domains: phandle to the power domain that the WMAC is part of +- mediatek,infracfg: phandle to the infrastructure bus fabric syscon node + Optional properties: - ieee80211-freq-limit: See ieee80211.txt - mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data +- big-endian: if the radio eeprom partition is written in big-endian, specify + this property The MAC address can as well be set with corresponding optional properties defined in net/ethernet.txt. @@ -31,6 +41,7 @@ Optional nodes: reg = <0x0000 0 0 0 0>; ieee80211-freq-limit = <5000000 6000000>; mediatek,mtd-eeprom = <&factory 0x8000>; + big-endian; led { led-sources = <2>; @@ -50,3 +61,15 @@ wmac: wmac@10300000 { mediatek,mtd-eeprom = <&factory 0x0000>; }; + +MT7622 example: + +wmac: wmac@18000000 { + compatible = "mediatek,mt7622-wmac"; + reg = <0 0x18000000 0 0x100000>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>; + + mediatek,infracfg = <&infracfg>; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; +}; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt index f38950560982..88fd28d15eac 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt @@ -9,11 +9,12 @@ Required properties: - spi-max-frequency : Maximum SPI clocking speed of device in Hz - interrupts : Should contain interrupt line - vio-supply : phandle to regulator providing VIO -- ti,power-gpio : GPIO connected to chip's PMEN pin Optional properties: - ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which provides configuration data (calibration, MAC, ...) +- ti,power-gpio : GPIO connected to chip's PMEN pin if operated in + SPI mode - Please consult Documentation/devicetree/bindings/spi/spi-bus.txt for optional SPI connection related properties, |