diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd/axp20x.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/axp20x.txt | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 9455503b0299..62091f6b025e 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -28,7 +28,6 @@ Required properties: * "x-powers,axp809" * "x-powers,axp813" - reg: The I2C slave address or RSB hardware address for the AXP chip -- interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin - interrupt-controller: The PMIC has its own internal IRQs - #interrupt-cells: Should be set to 1 @@ -43,7 +42,7 @@ Optional properties: regulator to drive the OTG VBus, rather then as an input pin which signals whether the board is driving OTG VBus or not. - (axp221 / axp223 / axp813 only) + (axp221 / axp223 / axp803/ axp813 only) - x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is wired for master mode. The default is slave mode. @@ -132,6 +131,7 @@ FLDO2 : LDO : fldoin-supply : shared supply LDO_IO0 : LDO : ips-supply : GPIO 0 LDO_IO1 : LDO : ips-supply : GPIO 1 RTC_LDO : LDO : ips-supply : always on +DRIVEVBUS : Enable output : drivevbus-supply : external regulator AXP806 regulators, type, and corresponding input supply names: |