diff options
Diffstat (limited to 'Documentation/devicetree/bindings/leds')
| -rw-r--r-- | Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt | 154 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml | 208 |
2 files changed, 208 insertions, 154 deletions
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt deleted file mode 100644 index c06863badfbd..000000000000 --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt +++ /dev/null @@ -1,154 +0,0 @@ -Binding for Qualcomm Technologies, Inc. WLED driver - -WLED (White Light Emitting Diode) driver is used for controlling display -backlight that is part of PMIC on Qualcomm Technologies, Inc. reference -platforms. The PMIC is connected to the host processor via SPMI bus. - -- compatible - Usage: required - Value type: <string> - Definition: should be one of: - "qcom,pm8941-wled" - "qcom,pmi8998-wled" - "qcom,pm660l-wled" - -- reg - Usage: required - Value type: <prop encoded array> - Definition: Base address of the WLED modules. - -- default-brightness - Usage: optional - Value type: <u32> - Definition: brightness value on boot, value from: 0-4095. - Default: 2048 - -- label - Usage: required - Value type: <string> - Definition: The name of the backlight device - -- qcom,cs-out - Usage: optional - Value type: <bool> - Definition: enable current sink output. - This property is supported only for PM8941. - -- qcom,cabc - Usage: optional - Value type: <bool> - Definition: enable content adaptive backlight control. - -- qcom,ext-gen - Usage: optional - Value type: <bool> - Definition: use externally generated modulator signal to dim. - This property is supported only for PM8941. - -- qcom,current-limit - Usage: optional - Value type: <u32> - Definition: mA; per-string current limit; value from 0 to 25 with - 1 mA step. Default 20 mA. - This property is supported only for pm8941. - -- qcom,current-limit-microamp - Usage: optional - Value type: <u32> - Definition: uA; per-string current limit; value from 0 to 30000 with - 2500 uA step. Default 25 mA. - -- qcom,current-boost-limit - Usage: optional - Value type: <u32> - Definition: mA; boost current limit. - For pm8941: one of: 105, 385, 525, 805, 980, 1260, 1400, - 1680. Default: 805 mA. - For pmi8998: one of: 105, 280, 450, 620, 970, 1150, 1300, - 1500. Default: 970 mA. - -- qcom,switching-freq - Usage: optional - Value type: <u32> - Definition: kHz; switching frequency; one of: 600, 640, 685, 738, - 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, - 4800, 9600. - Default: for pm8941: 1600 kHz - for pmi8998: 800 kHz - -- qcom,ovp - Usage: optional - Value type: <u32> - Definition: V; Over-voltage protection limit; one of: - 27, 29, 32, 35. Default: 29V - This property is supported only for PM8941. - -- qcom,ovp-millivolt - Usage: optional - Value type: <u32> - Definition: mV; Over-voltage protection limit; - For pmi8998: one of 18100, 19600, 29600, 31100. - Default 29600 mV. - If this property is not specified for PM8941, it - falls back to "qcom,ovp" property. - -- qcom,num-strings - Usage: optional - Value type: <u32> - Definition: #; number of led strings attached; - value: For PM8941 from 1 to 3. Default: 2 - For PMI8998 from 1 to 4. - -- interrupts - Usage: optional - Value type: <prop encoded array> - Definition: Interrupts associated with WLED. This should be - "short" and "ovp" interrupts. Interrupts can be - specified as per the encoding listed under - Documentation/devicetree/bindings/spmi/ - qcom,spmi-pmic-arb.txt. - -- interrupt-names - Usage: optional - Value type: <string> - Definition: Interrupt names associated with the interrupts. - Must be "short" and "ovp". The short circuit detection - is not supported for PM8941. - -- qcom,enabled-strings - Usage: optional - Value tyoe: <u32 array> - Definition: Array of the WLED strings numbered from 0 to 3. Each - string of leds are operated individually. Specify the - list of strings used by the device. Any combination of - led strings can be used. - -- qcom,external-pfet - Usage: optional - Value type: <bool> - Definition: Specify if external PFET control for short circuit - protection is used. This property is supported only - for PMI8998. - -- qcom,auto-string-detection - Usage: optional - Value type: <bool> - Definition: Enables auto-detection of the WLED string configuration. - This feature is not supported for PM8941. - - -Example: - -pm8941-wled@d800 { - compatible = "qcom,pm8941-wled"; - reg = <0xd800>; - label = "backlight"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - qcom,enabled-strings = <0 1>; -}; diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml new file mode 100644 index 000000000000..b835443b3c2c --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for Qualcomm Technologies, Inc. WLED driver + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Kiran Gunda <kgunda@codeaurora.org> + +description: | + WLED (White Light Emitting Diode) driver is used for controlling display + backlight that is part of PMIC on Qualcomm Technologies, Inc. reference + platforms. The PMIC is connected to the host processor via SPMI bus. + +properties: + compatible: + enum: + - qcom,pm8941-wled + - qcom,pmi8998-wled + - qcom,pm660l-wled + + reg: + maxItems: 1 + + default-brightness: + description: | + brightness value on boot. + minimum: 0 + maximum: 4095 + default: 2048 + + label: true + + qcom,cs-out: + description: | + enable current sink output. + This property is supported only for WLED3. + type: boolean + + qcom,cabc: + description: | + enable content adaptive backlight control. + type: boolean + + qcom,ext-gen: + description: | + use externally generated modulator signal to dim. + This property is supported only for WLED3. + type: boolean + + qcom,current-limit: + description: | + mA; per-string current limit. + This property is supported only for WLED3. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + default: 20 + minimum: 0 + maximum: 25 + + qcom,current-limit-microamp: + description: | + uA; per-string current limit. + default: 25 + minimum: 0 + maximum: 30000 + multipleOf: 25 + + qcom,current-boost-limit: + description: | + mA; boost current limit. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,switching-freq: + description: | + kHz; switching frequency. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ] + + qcom,ovp: + description: | + V; Over-voltage protection limit. + This property is supported only for WLED3. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 27, 29, 32, 35 ] + - default: 29 + + qcom,ovp-millivolt: + description: | + Over-voltage protection limit. This property is for WLED4 only. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 18100, 19600, 29600, 31100 ] + - default: 29600 + + qcom,num-strings: + description: | + number of led strings attached. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,enabled-strings: + description: | + Array of the WLED strings numbered from 0 to 3. Each + string of leds are operated individually. Specify the + list of strings used by the device. Any combination of + led strings can be used. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + + qcom,external-pfet: + description: | + Specify if external PFET control for short circuit + protection is used. This property is supported only + for WLED4. + type: boolean + + qcom,auto-string-detection: + description: | + Enables auto-detection of the WLED string configuration. + This feature is not supported for WLED3. + type: boolean + + interrupts: + minItems: 1 + items: + - description: over voltage protection interrupt. + - description: short circuit interrupt. + + interrupt-names: + minItems: 1 + items: + - const: ovp + - const: short + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,pm8941-wled + + then: + properties: + qcom,current-boost-limit: + enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ] + default: 805 + + qcom,switching-freq: + default: 1600 + + qcom,num-strings: + enum: [ 1, 2, 3 ] + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + else: + properties: + qcom,current-boost-limit: + enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ] + default: 970 + + qcom,switching-freq: + default: 800 + + qcom,num-strings: + enum: [ 1, 2, 3, 4 ] + + interrupts: + minItems: 2 + + interrupt-names: + minItems: 2 + +required: + - compatible + - reg + - label + +additionalProperties: false + +examples: + - | + backlight@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800 0x100>; + label = "backlight"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; + qcom,enabled-strings = <0 1>; + }; |