summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/clock/st
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/clock/st')
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt49
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt20
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt35
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt36
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt61
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen.txt54
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,flexgen.txt4
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,quadfs.txt31
8 files changed, 47 insertions, 243 deletions
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
deleted file mode 100644
index 6247652044a0..000000000000
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Binding for a ST divider and multiplexer clock driver.
-
-This binding uses the common clock binding[1].
-Base address is located to the parent node. See clock binding[2]
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
-
-Required properties:
-
-- compatible : shall be:
- "st,clkgena-divmux-c65-hs", "st,clkgena-divmux"
- "st,clkgena-divmux-c65-ls", "st,clkgena-divmux"
- "st,clkgena-divmux-c32-odf0", "st,clkgena-divmux"
- "st,clkgena-divmux-c32-odf1", "st,clkgena-divmux"
- "st,clkgena-divmux-c32-odf2", "st,clkgena-divmux"
- "st,clkgena-divmux-c32-odf3", "st,clkgena-divmux"
-
-- #clock-cells : From common clock binding; shall be set to 1.
-
-- clocks : From common clock binding
-
-- clock-output-names : From common clock binding.
-
-Example:
-
- clockgen-a@fd345000 {
- reg = <0xfd345000 0xb50>;
-
- clk_m_a1_div1: clk-m-a1-div1 {
- #clock-cells = <1>;
- compatible = "st,clkgena-divmux-c32-odf1",
- "st,clkgena-divmux";
-
- clocks = <&clk_m_a1_osc_prediv>,
- <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
- <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
-
- clock-output-names = "clk-m-rx-icn-ts",
- "clk-m-rx-icn-vdp-0",
- "", /* unused */
- "clk-m-prv-t1-bus",
- "clk-m-icn-reg-12",
- "clk-m-icn-reg-10",
- "", /* unused */
- "clk-m-icn-st231";
- };
- };
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
index f1fa91c68768..9a46cb1d7a04 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -10,14 +10,7 @@ This binding uses the common clock binding[1].
Required properties:
- compatible : shall be:
- "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux"
- "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux"
- "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux"
- "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux"
- "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux"
- "st,stih415-clkgen-a9-mux", "st,clkgen-mux"
- "st,stih416-clkgen-a9-mux", "st,clkgen-mux"
- "st,stih407-clkgen-a9-mux", "st,clkgen-mux"
+ "st,stih407-clkgen-a9-mux"
- #clock-cells : from common clock binding; shall be set to 0.
@@ -27,10 +20,13 @@ Required properties:
Example:
- clk_m_hva: clk-m-hva@fd690868 {
+ clk_m_a9: clk-m-a9@92b0000 {
#clock-cells = <0>;
- compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
- reg = <0xfd690868 4>;
+ compatible = "st,stih407-clkgen-a9-mux";
+ reg = <0x92b0000 0x10000>;
- clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>;
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index 844b3a0976bf..f207053e0550 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -9,24 +9,10 @@ Base address is located to the parent node. See clock binding[2]
Required properties:
- compatible : shall be:
- "st,clkgena-prediv-c65", "st,clkgena-prediv"
- "st,clkgena-prediv-c32", "st,clkgena-prediv"
-
- "st,clkgena-plls-c65"
- "st,plls-c32-a1x-0", "st,clkgen-plls-c32"
- "st,plls-c32-a1x-1", "st,clkgen-plls-c32"
- "st,stih415-plls-c32-a9", "st,clkgen-plls-c32"
- "st,stih415-plls-c32-ddr", "st,clkgen-plls-c32"
- "st,stih416-plls-c32-a9", "st,clkgen-plls-c32"
- "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"
- "st,stih407-plls-c32-a0", "st,clkgen-plls-c32"
- "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"
- "sst,plls-c32-cx_0", "st,clkgen-plls-c32"
- "sst,plls-c32-cx_1", "st,clkgen-plls-c32"
- "st,stih418-plls-c28-a9", "st,clkgen-plls-c32"
-
- "st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32"
- "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"
+ "st,clkgen-pll0"
+ "st,clkgen-pll1"
+ "st,stih407-clkgen-plla9"
+ "st,stih418-clkgen-plla9"
- #clock-cells : From common clock binding; shall be set to 1.
@@ -36,17 +22,16 @@ Required properties:
Example:
- clockgen-a@fee62000 {
- reg = <0xfee62000 0xb48>;
+ clockgen-a9@92b0000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x92b0000 0xffff>;
- clk_s_a0_pll: clk-s-a0-pll {
+ clockgen_a9_pll: clockgen-a9-pll {
#clock-cells = <1>;
- compatible = "st,clkgena-plls-c65";
+ compatible = "st,stih407-clkgen-plla9";
clocks = <&clk_sysin>;
- clock-output-names = "clk-s-a0-pll0-hs",
- "clk-s-a0-pll0-ls",
- "clk-s-a0-pll1";
+ clock-output-names = "clockgen-a9-pll-odf";
};
};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
deleted file mode 100644
index 604766c2619e..000000000000
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Binding for a ST pre-divider clock driver.
-
-This binding uses the common clock binding[1].
-Base address is located to the parent node. See clock binding[2]
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
-
-Required properties:
-
-- compatible : shall be:
- "st,clkgena-prediv-c65", "st,clkgena-prediv"
- "st,clkgena-prediv-c32", "st,clkgena-prediv"
-
-- #clock-cells : From common clock binding; shall be set to 0.
-
-- clocks : From common clock binding
-
-- clock-output-names : From common clock binding.
-
-Example:
-
- clockgen-a@fd345000 {
- reg = <0xfd345000 0xb50>;
-
- clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
- #clock-cells = <0>;
- compatible = "st,clkgena-prediv-c32",
- "st,clkgena-prediv";
-
- clocks = <&clk_sysin>;
-
- clock-output-names = "clk-m-a2-osc-prediv";
- };
- };
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
deleted file mode 100644
index 109b3eddcb17..000000000000
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Binding for a type of STMicroelectronics clock crossbar (VCC).
-
-The crossbar can take up to 4 input clocks and control up to 16
-output clocks. Not all inputs or outputs have to be in use in a
-particular instantiation. Each output can be individually enabled,
-select any of the input clocks and apply a divide (by 1,2,4 or 8) to
-that selected clock.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-
-- compatible : shall be:
- "st,stih416-clkgenc", "st,vcc"
- "st,stih416-clkgenf", "st,vcc"
-
-- #clock-cells : from common clock binding; shall be set to 1.
-
-- reg : A Base address and length of the register set.
-
-- clocks : from common clock binding
-
-- clock-output-names : From common clock binding. The block has 16
- clock outputs but not all of them in a specific instance
- have to be used in the SoC. If a clock name is left as
- an empty string then no clock will be created for the
- output associated with that string index. If fewer than
- 16 strings are provided then no clocks will be created
- for the remaining outputs.
-
-Example:
-
- clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac {
- #clock-cells = <1>;
- compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
- reg = <0xfe8308ac 12>;
-
- clocks = <&clk_s_vcc_hd>,
- <&clockgen_c 1>,
- <&clk_s_tmds_fromphy>,
- <&clockgen_c 2>;
-
- clock-output-names = "clk-s-pix-hdmi",
- "clk-s-pix-dvo",
- "clk-s-out-dvo",
- "clk-s-pix-hd",
- "clk-s-hddac",
- "clk-s-denc",
- "clk-s-sddac",
- "clk-s-pix-main",
- "clk-s-pix-aux",
- "clk-s-stfe-frc-0",
- "clk-s-ref-mcru",
- "clk-s-slave-mcru",
- "clk-s-tmds-hdmi",
- "clk-s-hdmi-reject-pll",
- "clk-s-thsens";
- };
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index b18bf86f926f..c35390f60545 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -13,14 +13,6 @@ address is common of all subnode.
...
};
- prediv_node {
- ...
- };
-
- divmux_node {
- ...
- };
-
quadfs_node {
...
};
@@ -29,10 +21,6 @@ address is common of all subnode.
...
};
- vcc_node {
- ...
- };
-
flexgen_node {
...
};
@@ -43,11 +31,8 @@ This binding uses the common clock binding[1].
Each subnode should use the binding described in [2]..[7]
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
-[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
-[6] Documentation/devicetree/bindings/clock/st,vcc.txt
[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
@@ -57,44 +42,27 @@ Required properties:
Example:
- clockgen-a@fee62000 {
-
- reg = <0xfee62000 0xb48>;
+ clockgen-a@090ff000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x90ff000 0x1000>;
clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
- compatible = "st,clkgena-plls-c65";
-
- clocks = <&clk-sysin>;
-
- clock-output-names = "clk-s-a0-pll0-hs",
- "clk-s-a0-pll0-ls",
- "clk-s-a0-pll1";
- };
-
- clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
- #clock-cells = <0>;
- compatible = "st,clkgena-prediv-c65",
- "st,clkgena-prediv";
+ compatible = "st,clkgen-pll0";
clocks = <&clk_sysin>;
- clock-output-names = "clk-s-a0-osc-prediv";
+ clock-output-names = "clk-s-a0-pll-ofd-0";
};
- clk_s_a0_hs: clk-s-a0-hs {
+ clk_s_a0_flexgen: clk-s-a0-flexgen {
+ compatible = "st,flexgen";
+
#clock-cells = <1>;
- compatible = "st,clkgena-divmux-c65-hs",
- "st,clkgena-divmux";
- clocks = <&clk-s_a0_osc_prediv>,
- <&clk-s_a0_pll 0>, /* pll0 hs */
- <&clk-s_a0_pll 2>; /* pll1 */
+ clocks = <&clk_s_a0_pll 0>,
+ <&clk_sysin>;
- clock-output-names = "clk-s-fdma-0",
- "clk-s-fdma-1",
- ""; /* clk-s-jit-sense */
- /* fourth output unused */
+ clock-output-names = "clk-ic-lmi0";
};
};
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
index b7ee5c7e0f75..7ff77fc57dff 100644
--- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -60,6 +60,10 @@ This binding uses the common clock binding[2].
Required properties:
- compatible : shall be:
"st,flexgen"
+ "st,flexgen-audio", "st,flexgen" (enable clock propagation on parent for
+ audio use case)
+ "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
+ and activate synchronous mode)
- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
outputs).
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
index cedeb9cc8208..d93d49342e60 100644
--- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -11,12 +11,8 @@ This binding uses the common clock binding[1].
Required properties:
- compatible : shall be:
- "st,stih416-quadfs216", "st,quadfs"
- "st,stih416-quadfs432", "st,quadfs"
- "st,stih416-quadfs660-E", "st,quadfs"
- "st,stih416-quadfs660-F", "st,quadfs"
- "st,stih407-quadfs660-C", "st,quadfs"
- "st,stih407-quadfs660-D", "st,quadfs"
+ "st,quadfs"
+ "st,quadfs-pll"
- #clock-cells : from common clock binding; shall be set to 1.
@@ -35,14 +31,15 @@ Required properties:
Example:
- clockgen_e: clockgen-e@fd3208bc {
- #clock-cells = <1>;
- compatible = "st,stih416-quadfs660-E", "st,quadfs";
- reg = <0xfd3208bc 0xB0>;
-
- clocks = <&clk_sysin>;
- clock-output-names = "clk-m-pix-mdtp-0",
- "clk-m-pix-mdtp-1",
- "clk-m-pix-mdtp-2",
- "clk-m-mpelpc";
- };
+ clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-pll";
+ reg = <0x9103000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-fs0-ch0",
+ "clk-s-c0-fs0-ch1",
+ "clk-s-c0-fs0-ch2",
+ "clk-s-c0-fs0-ch3";
+ };