summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/e1000/e1000.h5
-rw-r--r--drivers/net/e1000/e1000_ethtool.c8
-rw-r--r--drivers/net/e1000/e1000_hw.h1
-rw-r--r--drivers/net/e1000/e1000_main.c76
-rw-r--r--drivers/net/e1000/e1000_param.c4
5 files changed, 55 insertions, 39 deletions
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 4dd1326dd04f..5940f7a223bc 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -268,6 +268,7 @@ struct e1000_adapter {
#ifdef CONFIG_E1000_MQ
struct e1000_tx_ring **cpu_tx_ring; /* per-cpu */
#endif
+ unsigned long tx_queue_len;
uint32_t txd_cmd;
uint32_t tx_int_delay;
uint32_t tx_abs_int_delay;
@@ -303,7 +304,8 @@ struct e1000_adapter {
struct call_async_data_struct rx_sched_call_data;
int cpu_for_queue[4];
#endif
- int num_queues;
+ int num_tx_queues;
+ int num_rx_queues;
uint64_t hw_csum_err;
uint64_t hw_csum_good;
@@ -336,6 +338,7 @@ struct e1000_adapter {
struct e1000_rx_ring test_rx_ring;
+ u32 *config_space;
int msg_enable;
#ifdef CONFIG_PCI_MSI
boolean_t have_msi;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 54ae8805e79f..fa9a4659369a 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -614,8 +614,8 @@ e1000_set_ringparam(struct net_device *netdev,
struct e1000_rx_ring *rxdr, *rx_old, *rx_new;
int i, err, tx_ring_size, rx_ring_size;
- tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_queues;
- rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_queues;
+ tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
+ rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
if (netif_running(adapter->netdev))
e1000_down(adapter);
@@ -654,10 +654,10 @@ e1000_set_ringparam(struct net_device *netdev,
E1000_MAX_TXD : E1000_MAX_82544_TXD));
E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
- for (i = 0; i < adapter->num_queues; i++) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
txdr[i].count = txdr->count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
rxdr[i].count = rxdr->count;
- }
if(netif_running(adapter->netdev)) {
/* Try to get new resources before deleting old */
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 7caa35748cea..1ddfd56fc5df 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -1497,6 +1497,7 @@ struct e1000_hw {
#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 5f848b3a3a4d..540c8561fc24 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -411,8 +411,9 @@ e1000_up(struct e1000_adapter *adapter)
e1000_configure_tx(adapter);
e1000_setup_rctl(adapter);
e1000_configure_rx(adapter);
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_rx_queues; i++) {
adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i]);
+ }
#ifdef CONFIG_PCI_MSI
if(adapter->hw.mac_type > e1000_82547_rev_2) {
@@ -867,7 +868,7 @@ e1000_remove(struct pci_dev *pdev)
unregister_netdev(netdev);
#ifdef CONFIG_E1000_NAPI
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_rx_queues; i++)
__dev_put(&adapter->polling_netdev[i]);
#endif
@@ -972,15 +973,25 @@ e1000_sw_init(struct e1000_adapter *adapter)
switch (hw->mac_type) {
case e1000_82571:
case e1000_82572:
- adapter->num_queues = 2;
+ /* These controllers support 2 tx queues, but with a single
+ * qdisc implementation, multiple tx queues aren't quite as
+ * interesting. If we can find a logical way of mapping
+ * flows to a queue, then perhaps we can up the num_tx_queue
+ * count back to its default. Until then, we run the risk of
+ * terrible performance due to SACK overload. */
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 2;
break;
default:
- adapter->num_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
break;
}
- adapter->num_queues = min(adapter->num_queues, num_online_cpus());
+ adapter->num_rx_queues = min(adapter->num_rx_queues, num_online_cpus());
+ adapter->num_tx_queues = min(adapter->num_tx_queues, num_online_cpus());
#else
- adapter->num_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
#endif
if (e1000_alloc_queues(adapter)) {
@@ -989,7 +1000,7 @@ e1000_sw_init(struct e1000_adapter *adapter)
}
#ifdef CONFIG_E1000_NAPI
- for (i = 0; i < adapter->num_queues; i++) {
+ for (i = 0; i < adapter->num_rx_queues; i++) {
adapter->polling_netdev[i].priv = adapter;
adapter->polling_netdev[i].poll = &e1000_clean;
adapter->polling_netdev[i].weight = 64;
@@ -1022,13 +1033,13 @@ e1000_alloc_queues(struct e1000_adapter *adapter)
{
int size;
- size = sizeof(struct e1000_tx_ring) * adapter->num_queues;
+ size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
adapter->tx_ring = kmalloc(size, GFP_KERNEL);
if (!adapter->tx_ring)
return -ENOMEM;
memset(adapter->tx_ring, 0, size);
- size = sizeof(struct e1000_rx_ring) * adapter->num_queues;
+ size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
adapter->rx_ring = kmalloc(size, GFP_KERNEL);
if (!adapter->rx_ring) {
kfree(adapter->tx_ring);
@@ -1037,7 +1048,7 @@ e1000_alloc_queues(struct e1000_adapter *adapter)
memset(adapter->rx_ring, 0, size);
#ifdef CONFIG_E1000_NAPI
- size = sizeof(struct net_device) * adapter->num_queues;
+ size = sizeof(struct net_device) * adapter->num_rx_queues;
adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
if (!adapter->polling_netdev) {
kfree(adapter->tx_ring);
@@ -1066,12 +1077,12 @@ e1000_setup_queue_mapping(struct e1000_adapter *adapter)
lock_cpu_hotplug();
i = 0;
for_each_online_cpu(cpu) {
- *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_queues];
+ *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_tx_queues];
/* This is incomplete because we'd like to assign separate
* physical cpus to these netdev polling structures and
* avoid saturating a subset of cpus.
*/
- if (i < adapter->num_queues) {
+ if (i < adapter->num_rx_queues) {
*per_cpu_ptr(adapter->cpu_netdev, cpu) = &adapter->polling_netdev[i];
adapter->cpu_for_queue[i] = cpu;
} else
@@ -1291,7 +1302,7 @@ e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
{
int i, err = 0;
- for (i = 0; i < adapter->num_queues; i++) {
+ for (i = 0; i < adapter->num_tx_queues; i++) {
err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
if (err) {
DPRINTK(PROBE, ERR,
@@ -1319,7 +1330,7 @@ e1000_configure_tx(struct e1000_adapter *adapter)
/* Setup the HW Tx Head and Tail descriptor pointers */
- switch (adapter->num_queues) {
+ switch (adapter->num_tx_queues) {
case 2:
tdba = adapter->tx_ring[1].dma;
tdlen = adapter->tx_ring[1].count *
@@ -1537,7 +1548,7 @@ e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
{
int i, err = 0;
- for (i = 0; i < adapter->num_queues; i++) {
+ for (i = 0; i < adapter->num_rx_queues; i++) {
err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
if (err) {
DPRINTK(PROBE, ERR,
@@ -1709,7 +1720,7 @@ e1000_configure_rx(struct e1000_adapter *adapter)
/* Setup the HW Rx Head and Tail Descriptor Pointers and
* the Base and Length of the Rx Descriptor Ring */
- switch (adapter->num_queues) {
+ switch (adapter->num_rx_queues) {
#ifdef CONFIG_E1000_MQ
case 2:
rdba = adapter->rx_ring[1].dma;
@@ -1736,7 +1747,7 @@ e1000_configure_rx(struct e1000_adapter *adapter)
}
#ifdef CONFIG_E1000_MQ
- if (adapter->num_queues > 1) {
+ if (adapter->num_rx_queues > 1) {
uint32_t random[10];
get_random_bytes(&random[0], 40);
@@ -1746,7 +1757,7 @@ e1000_configure_rx(struct e1000_adapter *adapter)
E1000_WRITE_REG(hw, RSSIM, 0);
}
- switch (adapter->num_queues) {
+ switch (adapter->num_rx_queues) {
case 2:
default:
reta = 0x00800080;
@@ -1838,7 +1849,7 @@ e1000_free_all_tx_resources(struct e1000_adapter *adapter)
{
int i;
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_tx_queues; i++)
e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
}
@@ -1905,7 +1916,7 @@ e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
{
int i;
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_tx_queues; i++)
e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
}
@@ -1949,7 +1960,7 @@ e1000_free_all_rx_resources(struct e1000_adapter *adapter)
{
int i;
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_rx_queues; i++)
e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
}
@@ -2025,7 +2036,7 @@ e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
{
int i;
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_rx_queues; i++)
e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
}
@@ -2325,7 +2336,10 @@ e1000_watchdog_task(struct e1000_adapter *adapter)
e1000_update_adaptive(&adapter->hw);
- if (adapter->num_queues == 1 && !netif_carrier_ok(netdev)) {
+#ifdef CONFIG_E1000_MQ
+ txdr = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id());
+#endif
+ if (!netif_carrier_ok(netdev)) {
if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
/* We've lost link, so the controller stops DMA,
* but we've got queued Tx work that's never going
@@ -3197,14 +3211,12 @@ e1000_intr(int irq, void *data, struct pt_regs *regs)
E1000_WRITE_FLUSH(hw);
#ifdef CONFIG_E1000_MQ
if (atomic_read(&adapter->rx_sched_call_data.count) == 0) {
- cpu_set(adapter->cpu_for_queue[0],
- adapter->rx_sched_call_data.cpumask);
- for (i = 1; i < adapter->num_queues; i++) {
- cpu_set(adapter->cpu_for_queue[i],
- adapter->rx_sched_call_data.cpumask);
- atomic_inc(&adapter->irq_sem);
- }
- atomic_set(&adapter->rx_sched_call_data.count, i);
+ /* We must setup the cpumask once count == 0 since
+ * each cpu bit is cleared when the work is done. */
+ adapter->rx_sched_call_data.cpumask = adapter->cpumask;
+ atomic_add(adapter->num_rx_queues - 1, &adapter->irq_sem);
+ atomic_set(&adapter->rx_sched_call_data.count,
+ adapter->num_rx_queues);
smp_call_async_mask(&adapter->rx_sched_call_data);
} else {
printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count));
@@ -3267,7 +3279,7 @@ e1000_clean(struct net_device *poll_dev, int *budget)
while (poll_dev != &adapter->polling_netdev[i]) {
i++;
- if (unlikely(i == adapter->num_queues))
+ if (unlikely(i == adapter->num_rx_queues))
BUG();
}
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 852841f12fb9..b0be7d69af34 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -320,7 +320,7 @@ e1000_check_options(struct e1000_adapter *adapter)
} else {
tx_ring->count = opt.def;
}
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_tx_queues; i++)
tx_ring[i].count = tx_ring->count;
}
{ /* Receive Descriptor Count */
@@ -346,7 +346,7 @@ e1000_check_options(struct e1000_adapter *adapter)
} else {
rx_ring->count = opt.def;
}
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_rx_queues; i++)
rx_ring[i].count = rx_ring->count;
}
{ /* Checksum Offload Enable/Disable */