diff options
| -rw-r--r-- | drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 12 | ||||
| -rw-r--r-- | drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 18 | ||||
| -rw-r--r-- | drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 12 |
3 files changed, 37 insertions, 5 deletions
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h index 8936cfbf10e0..c8409bc5d9c3 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h @@ -11,6 +11,7 @@ #ifndef RVU_H #define RVU_H +#include <linux/pci.h> #include "rvu_struct.h" #include "common.h" #include "mbox.h" @@ -18,6 +19,9 @@ /* PCI device IDs */ #define PCI_DEVID_OCTEONTX2_RVU_AF 0xA065 +/* Subsystem Device ID */ +#define PCI_SUBSYS_DEVID_96XX 0xB200 + /* PCI BAR nos */ #define PCI_AF_REG_BAR_NUM 0 #define PCI_PF_REG_BAR_NUM 2 @@ -255,6 +259,14 @@ static inline u64 rvupf_read64(struct rvu *rvu, u64 offset) return readq(rvu->pfreg_base + offset); } +static inline bool is_rvu_9xxx_A0(struct rvu *rvu) +{ + struct pci_dev *pdev = rvu->pdev; + + return (pdev->revision == 0x00) && + (pdev->subsystem_device == PCI_SUBSYS_DEVID_96XX); +} + /* Function Prototypes * RVU */ diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index e46db89e91f9..b7998f6be386 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -114,6 +114,12 @@ static void nix_rx_sync(struct rvu *rvu, int blkaddr) err = rvu_poll_reg(rvu, blkaddr, NIX_AF_RX_SW_SYNC, BIT_ULL(0), true); if (err) dev_err(rvu->dev, "NIX RX software sync failed\n"); + + /* As per a HW errata in 9xxx A0 silicon, HW may clear SW_SYNC[ENA] + * bit too early. Hence wait for 50us more. + */ + if (is_rvu_9xxx_A0(rvu)) + usleep_range(50, 60); } static bool is_valid_txschq(struct rvu *rvu, int blkaddr, @@ -2135,10 +2141,10 @@ static int nix_aq_init(struct rvu *rvu, struct rvu_block *block) /* Set admin queue endianness */ cfg = rvu_read64(rvu, block->addr, NIX_AF_CFG); #ifdef __BIG_ENDIAN - cfg |= BIT_ULL(1); + cfg |= BIT_ULL(8); rvu_write64(rvu, block->addr, NIX_AF_CFG, cfg); #else - cfg &= ~BIT_ULL(1); + cfg &= ~BIT_ULL(8); rvu_write64(rvu, block->addr, NIX_AF_CFG, cfg); #endif @@ -2175,6 +2181,14 @@ int rvu_nix_init(struct rvu *rvu) return 0; block = &hw->block[blkaddr]; + /* As per a HW errata in 9xxx A0 silicon, NIX may corrupt + * internal state when conditional clocks are turned off. + * Hence enable them. + */ + if (is_rvu_9xxx_A0(rvu)) + rvu_write64(rvu, blkaddr, NIX_AF_CFG, + rvu_read64(rvu, blkaddr, NIX_AF_CFG) | 0x5EULL); + /* Calibrate X2P bus to check if CGX/LBK links are fine */ err = nix_calibrate_x2p(rvu, blkaddr); if (err) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index d93397e27e05..6ea2b0e2df42 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -970,7 +970,7 @@ int rvu_npc_init(struct rvu *rvu) struct npc_pkind *pkind = &rvu->hw->pkind; u64 keyz = NPC_MCAM_KEY_X2; int blkaddr, entry, bank, err; - u64 cfg; + u64 cfg, nibble_ena; blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0); if (blkaddr < 0) { @@ -1019,10 +1019,16 @@ int rvu_npc_init(struct rvu *rvu) /* Set RX and TX side MCAM search key size. * LA..LD (ltype only) + Channel */ + nibble_ena = 0x49247; rvu_write64(rvu, blkaddr, NPC_AF_INTFX_KEX_CFG(NIX_INTF_RX), - ((keyz & 0x3) << 32) | 0x49247); + ((keyz & 0x3) << 32) | nibble_ena); + /* Due to an errata (35786) in A0 pass silicon, parse nibble enable + * configuration has to be identical for both Rx and Tx interfaces. + */ + if (!is_rvu_9xxx_A0(rvu)) + nibble_ena = (1ULL << 19) - 1; rvu_write64(rvu, blkaddr, NPC_AF_INTFX_KEX_CFG(NIX_INTF_TX), - ((keyz & 0x3) << 32) | ((1ULL << 19) - 1)); + ((keyz & 0x3) << 32) | nibble_ena); err = npc_mcam_rsrcs_init(rvu, blkaddr); if (err) |