summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/core/driver.c23
-rw-r--r--drivers/usb/core/hub.c43
-rw-r--r--drivers/usb/core/message.c41
-rw-r--r--include/linux/usb.h8
4 files changed, 113 insertions, 2 deletions
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 23b3c7e79d4b..7e26fb3c2759 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -184,6 +184,20 @@ static int usb_unbind_device(struct device *dev)
return 0;
}
+/*
+ * Cancel any pending scheduled resets
+ *
+ * [see usb_queue_reset_device()]
+ *
+ * Called after unconfiguring / when releasing interfaces. See
+ * comments in __usb_queue_reset_device() regarding
+ * udev->reset_running.
+ */
+static void usb_cancel_queued_reset(struct usb_interface *iface)
+{
+ if (iface->reset_running == 0)
+ cancel_work_sync(&iface->reset_ws);
+}
/* called from driver core with dev locked */
static int usb_probe_interface(struct device *dev)
@@ -242,6 +256,7 @@ static int usb_probe_interface(struct device *dev)
mark_quiesced(intf);
intf->needs_remote_wakeup = 0;
intf->condition = USB_INTERFACE_UNBOUND;
+ usb_cancel_queued_reset(intf);
} else
intf->condition = USB_INTERFACE_BOUND;
@@ -272,6 +287,7 @@ static int usb_unbind_interface(struct device *dev)
usb_disable_interface(udev, intf);
driver->disconnect(intf);
+ usb_cancel_queued_reset(intf);
/* Reset other interface state.
* We cannot do a Set-Interface if the device is suspended or
@@ -380,8 +396,10 @@ void usb_driver_release_interface(struct usb_driver *driver,
if (device_is_registered(dev)) {
iface->condition = USB_INTERFACE_UNBINDING;
device_release_driver(dev);
+ } else {
+ iface->condition = USB_INTERFACE_UNBOUND;
+ usb_cancel_queued_reset(iface);
}
-
dev->driver = NULL;
usb_set_intfdata(iface, NULL);
@@ -942,7 +960,8 @@ static int usb_suspend_interface(struct usb_device *udev,
if (udev->state == USB_STATE_NOTATTACHED || !is_active(intf))
goto done;
- if (intf->condition == USB_INTERFACE_UNBOUND) /* This can't happen */
+ /* This can happen; see usb_driver_release_interface() */
+ if (intf->condition == USB_INTERFACE_UNBOUND)
goto done;
driver = to_usb_driver(intf->dev.driver);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 95fb3104ba4f..e65881899c8f 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3518,3 +3518,46 @@ int usb_reset_device(struct usb_device *udev)
return ret;
}
EXPORT_SYMBOL_GPL(usb_reset_device);
+
+
+/**
+ * usb_queue_reset_device - Reset a USB device from an atomic context
+ * @iface: USB interface belonging to the device to reset
+ *
+ * This function can be used to reset a USB device from an atomic
+ * context, where usb_reset_device() won't work (as it blocks).
+ *
+ * Doing a reset via this method is functionally equivalent to calling
+ * usb_reset_device(), except for the fact that it is delayed to a
+ * workqueue. This means that any drivers bound to other interfaces
+ * might be unbound, as well as users from usbfs in user space.
+ *
+ * Corner cases:
+ *
+ * - Scheduling two resets at the same time from two different drivers
+ * attached to two different interfaces of the same device is
+ * possible; depending on how the driver attached to each interface
+ * handles ->pre_reset(), the second reset might happen or not.
+ *
+ * - If a driver is unbound and it had a pending reset, the reset will
+ * be cancelled.
+ *
+ * - This function can be called during .probe() or .disconnect()
+ * times. On return from .disconnect(), any pending resets will be
+ * cancelled.
+ *
+ * There is no no need to lock/unlock the @reset_ws as schedule_work()
+ * does its own.
+ *
+ * NOTE: We don't do any reference count tracking because it is not
+ * needed. The lifecycle of the work_struct is tied to the
+ * usb_interface. Before destroying the interface we cancel the
+ * work_struct, so the fact that work_struct is queued and or
+ * running means the interface (and thus, the device) exist and
+ * are referenced.
+ */
+void usb_queue_reset_device(struct usb_interface *iface)
+{
+ schedule_work(&iface->reset_ws);
+}
+EXPORT_SYMBOL_GPL(usb_queue_reset_device);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index cc47d36798b1..aadf29f09c45 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1441,6 +1441,46 @@ static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev,
return retval;
}
+
+/*
+ * Internal function to queue a device reset
+ *
+ * This is initialized into the workstruct in 'struct
+ * usb_device->reset_ws' that is launched by
+ * message.c:usb_set_configuration() when initializing each 'struct
+ * usb_interface'.
+ *
+ * It is safe to get the USB device without reference counts because
+ * the life cycle of @iface is bound to the life cycle of @udev. Then,
+ * this function will be ran only if @iface is alive (and before
+ * freeing it any scheduled instances of it will have been cancelled).
+ *
+ * We need to set a flag (usb_dev->reset_running) because when we call
+ * the reset, the interfaces might be unbound. The current interface
+ * cannot try to remove the queued work as it would cause a deadlock
+ * (you cannot remove your work from within your executing
+ * workqueue). This flag lets it know, so that
+ * usb_cancel_queued_reset() doesn't try to do it.
+ *
+ * See usb_queue_reset_device() for more details
+ */
+void __usb_queue_reset_device(struct work_struct *ws)
+{
+ int rc;
+ struct usb_interface *iface =
+ container_of(ws, struct usb_interface, reset_ws);
+ struct usb_device *udev = interface_to_usbdev(iface);
+
+ rc = usb_lock_device_for_reset(udev, iface);
+ if (rc >= 0) {
+ iface->reset_running = 1;
+ usb_reset_device(udev);
+ iface->reset_running = 0;
+ usb_unlock_device(udev);
+ }
+}
+
+
/*
* usb_set_configuration - Makes a particular device setting be current
* @dev: the device whose configuration is being updated
@@ -1611,6 +1651,7 @@ free_interfaces:
intf->dev.type = &usb_if_device_type;
intf->dev.groups = usb_interface_groups;
intf->dev.dma_mask = dev->dev.dma_mask;
+ INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
device_initialize(&intf->dev);
mark_quiesced(intf);
dev_set_name(&intf->dev, "%d-%s:%d.%d",
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 859a88e6ce9c..c8e55aa979de 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -120,6 +120,11 @@ enum usb_interface_condition {
* to the sysfs representation for that device.
* @pm_usage_cnt: PM usage counter for this interface; autosuspend is not
* allowed unless the counter is 0.
+ * @reset_ws: Used for scheduling resets from atomic context.
+ * @reset_running: set to 1 if the interface is currently running a
+ * queued reset so that usb_cancel_queued_reset() doesn't try to
+ * remove from the workqueue when running inside the worker
+ * thread. See __usb_queue_reset_device().
*
* USB device drivers attach to interfaces on a physical device. Each
* interface encapsulates a single high level function, such as feeding
@@ -168,10 +173,12 @@ struct usb_interface {
unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */
unsigned needs_binding:1; /* needs delayed unbind/rebind */
+ unsigned reset_running:1;
struct device dev; /* interface specific device info */
struct device *usb_dev;
int pm_usage_cnt; /* usage counter for autosuspend */
+ struct work_struct reset_ws; /* for resets in atomic context */
};
#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
#define interface_to_usbdev(intf) \
@@ -507,6 +514,7 @@ extern int usb_lock_device_for_reset(struct usb_device *udev,
/* USB port reset for device reinitialization */
extern int usb_reset_device(struct usb_device *dev);
+extern void usb_queue_reset_device(struct usb_interface *dev);
extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);