diff options
| -rw-r--r-- | arch/m68k/include/asm/coldfire.h | 15 | ||||
| -rw-r--r-- | arch/m68knommu/Kconfig | 40 |
2 files changed, 49 insertions, 6 deletions
diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h index f06a0a439129..98d1d25101f2 100644 --- a/arch/m68k/include/asm/coldfire.h +++ b/arch/m68k/include/asm/coldfire.h @@ -33,14 +33,17 @@ * the base address. Some have an IPSBAR register instead, and it * has slightly different rules on its size and alignment. Some * parts have fixed addresses and the internal peripherals cannot - * be relocated in the address space. + * be relocated in the CPU address space. * - * This is generally setup by the boards start up code. + * The value of MBAR or IPSBAR is config time selectable, we no + * longer hard define it here. No MBAR or IPSBAR will be defined if + * this part has a fixed peripheral address map. */ -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MCF_IPSBAR 0x40000000 -#else -#define MCF_MBAR 0x10000000 +#ifdef CONFIG_MBAR +#define MCF_MBAR CONFIG_MBAR +#endif +#ifdef CONFIG_IPSBAR +#define MCF_IPSBAR CONFIG_IPSBAR #endif /****************************************************************************/ diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 04c7d348fbe7..b597ce07142b 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -79,6 +79,12 @@ config HAVE_CACHE_SPLIT config HAVE_CACHE_CB bool +config HAVE_MBAR + bool + +config HAVE_IPSBAR + bool + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -112,12 +118,14 @@ config M68360 config M5206 bool "MCF5206" select COLDFIRE_SW_A7 + select HAVE_MBAR help Motorola ColdFire 5206 processor support. config M5206e bool "MCF5206e" select COLDFIRE_SW_A7 + select HAVE_MBAR help Motorola ColdFire 5206e processor support. @@ -132,30 +140,35 @@ config M523x bool "MCF523x" select GENERIC_CLOCKEVENTS select HAVE_CACHE_SPLIT + select HAVE_IPSBAR help Freescale Coldfire 5230/1/2/4/5 processor support config M5249 bool "MCF5249" select COLDFIRE_SW_A7 + select HAVE_MBAR help Motorola ColdFire 5249 processor support. config M5271 bool "MCF5271" select HAVE_CACHE_SPLIT + select HAVE_IPSBAR help Freescale (Motorola) ColdFire 5270/5271 processor support. config M5272 bool "MCF5272" select COLDFIRE_SW_A7 + select HAVE_MBAR help Motorola ColdFire 5272 processor support. config M5275 bool "MCF5275" select HAVE_CACHE_SPLIT + select HAVE_IPSBAR help Freescale (Motorola) ColdFire 5274/5275 processor support. @@ -163,6 +176,7 @@ config M528x bool "MCF528x" select GENERIC_CLOCKEVENTS select HAVE_CACHE_SPLIT + select HAVE_IPSBAR help Motorola ColdFire 5280/5282 processor support. @@ -170,6 +184,7 @@ config M5307 bool "MCF5307" select COLDFIRE_SW_A7 select HAVE_CACHE_CB + select HAVE_MBAR help Motorola ColdFire 5307 processor support. @@ -183,18 +198,21 @@ config M5407 bool "MCF5407" select COLDFIRE_SW_A7 select HAVE_CACHE_CB + select HAVE_MBAR help Motorola ColdFire 5407 processor support. config M547x bool "MCF547x" select HAVE_CACHE_CB + select HAVE_MBAR help Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support. config M548x bool "MCF548x" select HAVE_CACHE_CB + select HAVE_MBAR help Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. @@ -650,6 +668,28 @@ config VECTORBASE platforms this address is programmed into the VBR register, thus actually setting the address to use. +config MBAR + hex "Address of the MBAR (internal peripherals)" + default "0x10000000" + depends on HAVE_MBAR + help + Define the address of the internal system peripherals. This value + is set in the processors MBAR register. This is generally setup by + the boot loader, and will not be written by the kernel. By far most + ColdFire boards use the default 0x10000000 value, so if unsure then + use this. + +config IPSBAR + hex "Address of the IPSBAR (internal peripherals)" + default "0x40000000" + depends on HAVE_IPSBAR + help + Define the address of the internal system peripherals. This value + is set in the processors IPSBAR register. This is generally setup by + the boot loader, and will not be written by the kernel. By far most + ColdFire boards use the default 0x40000000 value, so if unsure then + use this. + config KERNELBASE hex "Address of the base of kernel code" default "0x400" |