summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c33
1 files changed, 27 insertions, 6 deletions
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index b31ca4cef365..8f159db4d08a 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
@@ -32,6 +33,7 @@
#define DNS323_GPIO_LED_RIGHT_AMBER 1
#define DNS323_GPIO_LED_LEFT_AMBER 2
+#define DNS323_GPIO_SYSTEM_UP 3
#define DNS323_GPIO_LED_POWER 5
#define DNS323_GPIO_OVERTEMP 6
#define DNS323_GPIO_RTC 7
@@ -239,7 +241,7 @@ static struct gpio_led dns323_leds[] = {
{
.name = "power:blue",
.gpio = DNS323_GPIO_LED_POWER,
- .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "right:amber",
.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -334,7 +336,7 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
{ 0, MPP_UNUSED },
{ 1, MPP_GPIO }, /* right amber LED (sata ch0) */
{ 2, MPP_GPIO }, /* left amber LED (sata ch1) */
- { 3, MPP_UNUSED },
+ { 3, MPP_GPIO }, /* system up flag */
{ 4, MPP_GPIO }, /* power button LED */
{ 5, MPP_GPIO }, /* power button LED */
{ 6, MPP_GPIO }, /* GMT G751-2f overtemp */
@@ -372,13 +374,23 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = {
},
};
-/* DNS-323 specific power off method */
-static void dns323_power_off(void)
+/* DNS-323 rev. A specific power off method */
+static void dns323a_power_off(void)
{
pr_info("%s: triggering power-off...\n", __func__);
gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
}
+/* DNS-323 rev B specific power off method */
+static void dns323b_power_off(void)
+{
+ pr_info("%s: triggering power-off...\n", __func__);
+ /* Pin has to be changed to 1 and back to 0 to do actual power off. */
+ gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+ mdelay(100);
+ gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
+}
+
static void __init dns323_init(void)
{
/* Setup basic Orion functions. Need to be called early. */
@@ -424,11 +436,20 @@ static void __init dns323_init(void)
if (dns323_dev_id() == MV88F5182_DEV_ID)
orion5x_sata_init(&dns323_sata_data);
- /* register dns323 specific power-off method */
+ /* The 5182 has flag to indicate the system is up. Without this flag
+ * set, power LED will flash and cannot be controlled via leds-gpio.
+ */
+ if (dns323_dev_id() == MV88F5182_DEV_ID)
+ gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
+
+ /* Register dns323 specific power-off method */
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS323: failed to setup power-off GPIO\n");
- pm_power_off = dns323_power_off;
+ if (dns323_dev_id() == MV88F5182_DEV_ID)
+ pm_power_off = dns323b_power_off;
+ else
+ pm_power_off = dns323a_power_off;
}
/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */