diff options
| -rw-r--r-- | tools/testing/selftests/netfilter/Makefile | 2 | ||||
| -rwxr-xr-x | tools/testing/selftests/netfilter/conntrack_icmp_related.sh | 283 |
2 files changed, 284 insertions, 1 deletions
diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index c9ff2b47bd1c..a37cb1192c6a 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for netfilter selftests -TEST_PROGS := nft_trans_stress.sh nft_nat.sh +TEST_PROGS := nft_trans_stress.sh nft_nat.sh conntrack_icmp_related.sh include ../lib.mk diff --git a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh new file mode 100755 index 000000000000..b48e1833bc89 --- /dev/null +++ b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh @@ -0,0 +1,283 @@ +#!/bin/bash +# +# check that ICMP df-needed/pkttoobig icmp are set are set as related +# state +# +# Setup is: +# +# nsclient1 -> nsrouter1 -> nsrouter2 -> nsclient2 +# MTU 1500, except for nsrouter2 <-> nsclient2 link (1280). +# ping nsclient2 from nsclient1, checking that conntrack did set RELATED +# 'fragmentation needed' icmp packet. +# +# In addition, nsrouter1 will perform IP masquerading, i.e. also +# check the icmp errors are propagated to the correct host as per +# nat of "established" icmp-echo "connection". + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +cleanup() { + for i in 1 2;do ip netns del nsclient$i;done + for i in 1 2;do ip netns del nsrouter$i;done +} + +ipv4() { + echo -n 192.168.$1.2 +} + +ipv6 () { + echo -n dead:$1::2 +} + +check_counter() +{ + ns=$1 + name=$2 + expect=$3 + local lret=0 + + cnt=$(ip netns exec $ns nft list counter inet filter "$name" | grep -q "$expect") + if [ $? -ne 0 ]; then + echo "ERROR: counter $name in $ns has unexpected value (expected $expect)" 1>&2 + ip netns exec $ns nft list counter inet filter "$name" 1>&2 + lret=1 + fi + + return $lret +} + +check_unknown() +{ + expect="packets 0 bytes 0" + for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do + check_counter $n "unknown" "$expect" + if [ $? -ne 0 ] ;then + return 1 + fi + done + + return 0 +} + +for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do + ip netns add $n + ip -net $n link set lo up +done + +DEV=veth0 +ip link add $DEV netns nsclient1 type veth peer name eth1 netns nsrouter1 +DEV=veth0 +ip link add $DEV netns nsclient2 type veth peer name eth1 netns nsrouter2 + +DEV=veth0 +ip link add $DEV netns nsrouter1 type veth peer name eth2 netns nsrouter2 + +DEV=veth0 +for i in 1 2; do + ip -net nsclient$i link set $DEV up + ip -net nsclient$i addr add $(ipv4 $i)/24 dev $DEV + ip -net nsclient$i addr add $(ipv6 $i)/64 dev $DEV +done + +ip -net nsrouter1 link set eth1 up +ip -net nsrouter1 link set veth0 up + +ip -net nsrouter2 link set eth1 up +ip -net nsrouter2 link set eth2 up + +ip -net nsclient1 route add default via 192.168.1.1 +ip -net nsclient1 -6 route add default via dead:1::1 + +ip -net nsclient2 route add default via 192.168.2.1 +ip -net nsclient2 route add default via dead:2::1 + +i=3 +ip -net nsrouter1 addr add 192.168.1.1/24 dev eth1 +ip -net nsrouter1 addr add 192.168.3.1/24 dev veth0 +ip -net nsrouter1 addr add dead:1::1/64 dev eth1 +ip -net nsrouter1 addr add dead:3::1/64 dev veth0 +ip -net nsrouter1 route add default via 192.168.3.10 +ip -net nsrouter1 -6 route add default via dead:3::10 + +ip -net nsrouter2 addr add 192.168.2.1/24 dev eth1 +ip -net nsrouter2 addr add 192.168.3.10/24 dev eth2 +ip -net nsrouter2 addr add dead:2::1/64 dev eth1 +ip -net nsrouter2 addr add dead:3::10/64 dev eth2 +ip -net nsrouter2 route add default via 192.168.3.1 +ip -net nsrouter2 route add default via dead:3::1 + +sleep 2 +for i in 4 6; do + ip netns exec nsrouter1 sysctl -q net.ipv$i.conf.all.forwarding=1 + ip netns exec nsrouter2 sysctl -q net.ipv$i.conf.all.forwarding=1 +done + +for netns in nsrouter1 nsrouter2; do +ip netns exec $netns nft -f - <<EOF +table inet filter { + counter unknown { } + counter related { } + chain forward { + type filter hook forward priority 0; policy accept; + meta l4proto icmpv6 icmpv6 type "packet-too-big" ct state "related" counter name "related" accept + meta l4proto icmp icmp type "destination-unreachable" ct state "related" counter name "related" accept + meta l4proto { icmp, icmpv6 } ct state new,established accept + counter name "unknown" drop + } +} +EOF +done + +ip netns exec nsclient1 nft -f - <<EOF +table inet filter { + counter unknown { } + counter related { } + chain input { + type filter hook input priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "related" counter name "related" accept + counter name "unknown" drop + } +} +EOF + +ip netns exec nsclient2 nft -f - <<EOF +table inet filter { + counter unknown { } + counter new { } + counter established { } + + chain input { + type filter hook input priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" accept + meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" accept + counter name "unknown" drop + } + chain output { + type filter hook output priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" + meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" + counter name "unknown" drop + } +} +EOF + + +# make sure NAT core rewrites adress of icmp error if nat is used according to +# conntrack nat information (icmp error will be directed at nsrouter1 address, +# but it needs to be routed to nsclient1 address). +ip netns exec nsrouter1 nft -f - <<EOF +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + ip protocol icmp oifname "veth0" counter masquerade + } +} +table ip6 nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + ip6 nexthdr icmpv6 oifname "veth0" counter masquerade + } +} +EOF + +ip netns exec nsrouter2 ip link set eth1 mtu 1280 +ip netns exec nsclient2 ip link set veth0 mtu 1280 +sleep 1 + +ip netns exec nsclient1 ping -c 1 -s 1000 -q -M do 192.168.2.2 >/dev/null +if [ $? -ne 0 ]; then + echo "ERROR: netns ip routing/connectivity broken" 1>&2 + cleanup + exit 1 +fi +ip netns exec nsclient1 ping6 -q -c 1 -s 1000 dead:2::2 >/dev/null +if [ $? -ne 0 ]; then + echo "ERROR: netns ipv6 routing/connectivity broken" 1>&2 + cleanup + exit 1 +fi + +check_unknown +if [ $? -ne 0 ]; then + ret=1 +fi + +expect="packets 0 bytes 0" +for netns in nsrouter1 nsrouter2 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +expect="packets 2 bytes 2076" +check_counter nsclient2 "new" "$expect" +if [ $? -ne 0 ]; then + ret=1 +fi + +ip netns exec nsclient1 ping -q -c 1 -s 1300 -M do 192.168.2.2 > /dev/null +if [ $? -eq 0 ]; then + echo "ERROR: ping should have failed with PMTU too big error" 1>&2 + ret=1 +fi + +# nsrouter2 should have generated the icmp error, so +# related counter should be 0 (its in forward). +expect="packets 0 bytes 0" +check_counter "nsrouter2" "related" "$expect" +if [ $? -ne 0 ]; then + ret=1 +fi + +# but nsrouter1 should have seen it, same for nsclient1. +expect="packets 1 bytes 576" +for netns in nsrouter1 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +ip netns exec nsclient1 ping6 -c 1 -s 1300 dead:2::2 > /dev/null +if [ $? -eq 0 ]; then + echo "ERROR: ping6 should have failed with PMTU too big error" 1>&2 + ret=1 +fi + +expect="packets 2 bytes 1856" +for netns in nsrouter1 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +if [ $ret -eq 0 ];then + echo "PASS: icmp mtu error had RELATED state" +else + echo "ERROR: icmp error RELATED state test has failed" +fi + +cleanup +exit $ret |