diff options
| -rw-r--r-- | arch/arm/mach-s3c6400/include/mach/regs-clock.h | 16 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/Kconfig | 9 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/include/plat/pm.h | 12 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/pm.c | 6 | ||||
| -rw-r--r-- | arch/arm/plat-s3c64xx/Makefile | 5 | ||||
| -rw-r--r-- | arch/arm/plat-s3c64xx/include/plat/irqs.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-s3c64xx/include/plat/pm-core.h | 98 | ||||
| -rw-r--r-- | arch/arm/plat-s3c64xx/include/plat/regs-clock.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-s3c64xx/irq-eint.c | 3 | ||||
| -rw-r--r-- | arch/arm/plat-s3c64xx/pm.c | 186 | ||||
| -rw-r--r-- | arch/arm/plat-s3c64xx/sleep.S | 144 |
11 files changed, 479 insertions, 2 deletions
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h new file mode 100644 index 000000000000..a6c7f4eb3a1b --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/regs-clock.h @@ -0,0 +1,16 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - clock register compatibility with s3c24xx + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <plat/regs-clock.h> + diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 042d34a6f815..a4c5027421d3 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -71,6 +71,15 @@ config S3C2410_PM_DEBUG Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> for more information. +config S3C_PM_DEBUG_LED_SMDK + bool "SMDK LED suspend/resume debugging" + depends on PM && (MACH_SMDK6410) + help + Say Y here to enable the use of the SMDK LEDs on the baseboard + for debugging of the state of the suspend and resume process. + + Note, this currently only works for S3C64XX based SMDK boards. + config S3C2410_PM_CHECK bool "S3C2410 PM Suspend Memory CRC" depends on PM && CRC32 diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index 5f8707e2a09c..7a797192fcf3 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -127,6 +127,18 @@ extern void s3c_pm_dbg(const char *msg, ...); #define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt) #endif +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK +/** + * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs + * @set: set bits for the state of the LEDs + * @clear: clear bits for the state of the LEDs. + */ +extern void s3c_pm_debug_smdkled(u32 set, u32 clear); + +#else +static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { } +#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */ + /* suspend memory checking */ #ifdef CONFIG_S3C2410_PM_CHECK diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index 9957b539600f..8d97db2c7a0d 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -21,11 +21,10 @@ #include <asm/cacheflush.h> #include <mach/hardware.h> +#include <mach/map.h> #include <plat/regs-serial.h> #include <mach/regs-clock.h> -#include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-irq.h> #include <asm/irq.h> @@ -326,6 +325,9 @@ static int s3c_pm_enter(suspend_state_t state) S3C_PMDBG("%s: post sleep, preparing to return\n", __func__); + /* LEDs should now be 1110 */ + s3c_pm_debug_smdkled(1 << 1, 0); + s3c_pm_check_restore(); /* ok, let's return from sleep */ diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile index 2e6d79bf8f33..b2bc2a9ed46b 100644 --- a/arch/arm/plat-s3c64xx/Makefile +++ b/arch/arm/plat-s3c64xx/Makefile @@ -24,6 +24,11 @@ obj-y += gpiolib.o obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o +# PM support + +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += sleep.o + # Device setup obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index f865bf4d709e..743a70094d04 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -157,6 +157,7 @@ #define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE) #define IRQ_EINT(x) S3C_EINT(x) +#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0)) /* Next the external interrupt groups. These are similar to the IRQ_EINT(x) * that they are sourced from the GPIO pins but with a different scheme for diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h new file mode 100644 index 000000000000..d347de3ba0dc --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/pm-core.h @@ -0,0 +1,98 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <plat/regs-gpio.h> + +static inline void s3c_pm_debug_init_uart(void) +{ + u32 tmp = __raw_readl(S3C_PCLK_GATE); + + /* As a note, since the S3C64XX UARTs generally have multiple + * clock sources, we simply enable PCLK at the moment and hope + * that the resume settings for the UART are suitable for the + * use with PCLK. + */ + + tmp |= S3C_CLKCON_PCLK_UART0; + tmp |= S3C_CLKCON_PCLK_UART1; + tmp |= S3C_CLKCON_PCLK_UART2; + tmp |= S3C_CLKCON_PCLK_UART3; + + __raw_writel(tmp, S3C_PCLK_GATE); + udelay(10); +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + /* VIC should have already been taken care of */ + + /* clear any pending EINT0 interrupts */ + __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND); +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ +} + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ +} + +/* make these defines, we currently do not have any need to change + * the IRQ wake controls depending on the CPU we are running on */ + +#define s3c_irqwake_eintallow ((1 << 28) - 1) +#define s3c_irqwake_intallow (0) + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + u32 ucon = __raw_readl(regs + S3C2410_UCON); + u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; + u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; + u32 new_ucon; + u32 delta; + + /* S3C64XX UART blocks only support level interrupts, so ensure that + * when we restore unused UART blocks we force the level interrupt + * settigs. */ + save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; + + /* We have a constraint on changing the clock type of the UART + * between UCLKx and PCLK, so ensure that when we restore UCON + * that the CLK field is correctly modified if the bootloader + * has changed anything. + */ + if (ucon_clk != save_clk) { + new_ucon = save->ucon; + delta = ucon_clk ^ save_clk; + + /* change from UCLKx => wrong PCLK, + * either UCLK can be tested for by a bit-test + * with UCLK0 */ + if (ucon_clk & S3C6400_UCON_UCLK0 && + !(save_clk & S3C6400_UCON_UCLK0) && + delta & S3C6400_UCON_PCLK2) { + new_ucon &= ~S3C6400_UCON_UCLK0; + } else if (delta == S3C6400_UCON_PCLK2) { + /* as an precaution, don't change from + * PCLK2 => PCLK or vice-versa */ + new_ucon ^= S3C6400_UCON_PCLK2; + } + + S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", + ucon, new_ucon, save->ucon); + save->ucon = new_ucon; + } +} diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h index b1082c163247..52836d41e333 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h @@ -32,6 +32,7 @@ #define S3C_HCLK_GATE S3C_CLKREG(0x30) #define S3C_PCLK_GATE S3C_CLKREG(0x34) #define S3C_SCLK_GATE S3C_CLKREG(0x38) +#define S3C_MEM0_GATE S3C_CLKREG(0x3C) /* CLKDIV0 */ #define S3C6400_CLKDIV0_MFC_MASK (0xf << 28) diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 47e5155bb13e..f81b7b818ba0 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/sysdev.h> #include <linux/gpio.h> #include <linux/irq.h> #include <linux/io.h> @@ -26,6 +27,7 @@ #include <mach/map.h> #include <plat/cpu.h> +#include <plat/pm.h> #define eint_offset(irq) ((irq) - IRQ_EINT(0)) #define eint_irq_to_bit(irq) (1 << eint_offset(irq)) @@ -134,6 +136,7 @@ static struct irq_chip s3c_irq_eint = { .mask_ack = s3c_irq_eint_maskack, .ack = s3c_irq_eint_ack, .set_type = s3c_irq_eint_set_type, + .set_wake = s3c_irqext_wake, }; /* s3c_irq_demux_eint diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c new file mode 100644 index 000000000000..98190aa364ae --- /dev/null +++ b/arch/arm/plat-s3c64xx/pm.c @@ -0,0 +1,186 @@ +/* linux/arch/arm/plat-s3c64xx/pm.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX CPU PM support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +#include <mach/map.h> + +#include <plat/pm.h> +#include <plat/regs-sys.h> +#include <plat/regs-gpio.h> +#include <plat/regs-clock.h> +#include <plat/regs-syscon-power.h> +#include <plat/regs-gpio-memport.h> + +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK +#include <plat/gpio-bank-n.h> + +void s3c_pm_debug_smdkled(u32 set, u32 clear) +{ + unsigned long flags; + u32 reg; + + local_irq_save(flags); + reg = __raw_readl(S3C64XX_GPNCON); + reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | + S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)); + reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | + S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15); + __raw_writel(reg, S3C64XX_GPNCON); + + reg = __raw_readl(S3C64XX_GPNDAT); + reg &= ~(clear << 12); + reg |= set << 12; + __raw_writel(reg, S3C64XX_GPNDAT); + + local_irq_restore(flags); +} +#endif + +static struct sleep_save core_save[] = { + SAVE_ITEM(S3C_APLL_LOCK), + SAVE_ITEM(S3C_MPLL_LOCK), + SAVE_ITEM(S3C_EPLL_LOCK), + SAVE_ITEM(S3C_CLK_SRC), + SAVE_ITEM(S3C_CLK_DIV0), + SAVE_ITEM(S3C_CLK_DIV1), + SAVE_ITEM(S3C_CLK_DIV2), + SAVE_ITEM(S3C_CLK_OUT), + SAVE_ITEM(S3C_HCLK_GATE), + SAVE_ITEM(S3C_PCLK_GATE), + SAVE_ITEM(S3C_SCLK_GATE), + SAVE_ITEM(S3C_MEM0_GATE), + + SAVE_ITEM(S3C_EPLL_CON1), + SAVE_ITEM(S3C_EPLL_CON0), + + SAVE_ITEM(S3C64XX_MEM0DRVCON), + SAVE_ITEM(S3C64XX_MEM1DRVCON), + +#ifndef CONFIG_CPU_FREQ + SAVE_ITEM(S3C_APLL_CON), + SAVE_ITEM(S3C_MPLL_CON), +#endif +}; + +static struct sleep_save misc_save[] = { + SAVE_ITEM(S3C64XX_AHB_CON0), + SAVE_ITEM(S3C64XX_AHB_CON1), + SAVE_ITEM(S3C64XX_AHB_CON2), + + SAVE_ITEM(S3C64XX_SPCON), + + SAVE_ITEM(S3C64XX_MEM0CONSTOP), + SAVE_ITEM(S3C64XX_MEM1CONSTOP), + SAVE_ITEM(S3C64XX_MEM0CONSLP0), + SAVE_ITEM(S3C64XX_MEM0CONSLP1), + SAVE_ITEM(S3C64XX_MEM1CONSLP), +}; + +void s3c_pm_configure_extint(void) +{ + __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK); +} + +void s3c_pm_save_gpios(void) +{ + /* currently, unless the bootloader does something really stupid + * the gpio blocks should be maintained over their sleep. + */ +} + +void s3c_pm_restore_gpios(void) +{ +} + +void s3c_pm_restore_core(void) +{ + __raw_writel(0, S3C64XX_EINT_MASK); + + s3c_pm_debug_smdkled(1 << 2, 0); + + s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); + s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); +} + +void s3c_pm_save_core(void) +{ + s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); + s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); +} + +/* since both s3c6400 and s3c6410 share the same sleep pm calls, we + * put the per-cpu code in here until any new cpu comes along and changes + * this. + */ + +#include <plat/regs-gpio.h> + +static void s3c64xx_cpu_suspend(void) +{ + unsigned long tmp; + + /* set our standby method to sleep */ + + tmp = __raw_readl(S3C64XX_PWR_CFG); + tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK; + tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP; + __raw_writel(tmp, S3C64XX_PWR_CFG); + + /* clear any old wakeup */ + + __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), + S3C64XX_WAKEUP_STAT); + + /* set the LED state to 0110 over sleep */ + s3c_pm_debug_smdkled(3 << 1, 0xf); + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 5\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp)); + + /* we should never get past here */ + + panic("sleep resumed to originator?"); +} + +static void s3c64xx_pm_prepare(void) +{ + /* store address of resume. */ + __raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0); + + /* ensure previous wakeup state is cleared before sleeping */ + __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT); +} + +static int s3c64xx_pm_init(void) +{ + pm_cpu_prep = s3c64xx_pm_prepare; + pm_cpu_sleep = s3c64xx_cpu_suspend; + pm_uart_udivslot = 1; + return 0; +} + +arch_initcall(s3c64xx_pm_init); diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/plat-s3c64xx/sleep.S new file mode 100644 index 000000000000..8e71fe90a373 --- /dev/null +++ b/arch/arm/plat-s3c64xx/sleep.S @@ -0,0 +1,144 @@ +/* linux/0arch/arm/plat-s3c64xx/sleep.S + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX CPU sleep code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/map.h> + +#undef S3C64XX_VA_GPIO +#define S3C64XX_VA_GPIO (0x0) + +#include <plat/regs-gpio.h> +#include <plat/gpio-bank-n.h> + +#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT)) + + .text + + /* s3c_cpu_save + * + * Save enough processor state to allow the restart of the pm.c + * code after resume. + * + * entry: + * r0 = pointer to the save block + */ + +ENTRY(s3c_cpu_save) + stmfd sp!, { r4 - r12, lr } + + mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control + mrc p15, 0, r9, c1, c0, 0 @ Control register + mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls + + stmia r0, { r4 - r13 } @ Save CP registers and SP + + @@ save our state to ram + bl s3c_pm_cb_flushcache + + @@ call final suspend code + ldr r0, =pm_cpu_sleep + ldr pc, [r0] + + @@ return to the caller, after the MMU is turned on. + @@ restore the last bits of the stack and return. +resume_with_mmu: + ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save + + .data + + /* the next bit is code, but it requires easy access to the + * s3c_sleep_save_phys data before the MMU is switched on, so + * we store the code that needs this variable in the .data where + * the value can be written to (the .text segment is RO). + */ + + .global s3c_sleep_save_phys +s3c_sleep_save_phys: + .word 0 + + /* Sleep magic, the word before the resume entry point so that the + * bootloader can check for a resumeable image. */ + + .word 0x2bedf00d + + /* s3c_cpu_reusme + * + * This is the entry point, stored by whatever method the bootloader + * requires to get the kernel runnign again. This code expects to be + * entered with no caches live and the MMU disabled. It will then + * restore the MMU and other basic CP registers saved and restart + * the kernel C code to finish the resume code. + */ + +ENTRY(s3c_cpu_resume) + msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE + ldr r2, =LL_UART /* for debug */ + +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + /* Initialise the GPIO state if we are debugging via the SMDK LEDs, + * as the uboot version supplied resets these to inputs during the + * resume checks. + */ + + ldr r3, =S3C64XX_PA_GPIO + ldr r0, [ r3, #S3C64XX_GPNCON ] + bic r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \ + S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)) + orr r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \ + S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15)) + str r0, [ r3, #S3C64XX_GPNCON ] + + ldr r0, [ r3, #S3C64XX_GPNDAT ] + bic r0, r0, #0xf << 12 @ GPN12..15 + orr r0, r0, #1 << 15 @ GPN15 + str r0, [ r3, #S3C64XX_GPNDAT ] +#endif + + /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches + * are thoroughly cleaned just in case the bootloader didn't do it + * for us. */ + mov r0, #0 + mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + @@mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs + @@mcr p15, 0, r0, c7, c7, 0 @ Invalidate I + D caches + + ldr r0, s3c_sleep_save_phys + ldmia r0, { r4 - r13 } + + mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + + mov r0, #0 @ restore copro access controls + mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls + mcr p15, 0, r0, c7, c5, 4 + + ldr r2, =resume_with_mmu + mcr p15, 0, r9, c1, c0, 0 /* turn mmu back on */ + nop + mov pc, r2 /* jump back */ + + .end |