summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/mips/Kconfig1
-rw-r--r--arch/mips/pci/Makefile2
-rw-r--r--arch/mips/pci/pci-bcm1480.c21
-rw-r--r--arch/mips/pci/pci-bcm1480ht.c224
-rw-r--r--arch/mips/pci/pci.c17
-rw-r--r--include/asm-mips/pci.h5
6 files changed, 253 insertions, 17 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index df5094dac6c7..3c438631fd7c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -554,6 +554,7 @@ config SIBYTE_BIGSUR
select SWAP_IO_SPACE
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select PCI_DOMAINS
config SIBYTE_SWARM
bool "Support for Sibyte BCM91250A-SWARM"
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index cd697f6c9984..7b7468304022 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -46,7 +46,7 @@ obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
-obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o
+obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index 12bb74454137..4905d8593d6d 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -56,13 +56,11 @@
static void *cfg_space;
#define PCI_BUS_ENABLED 1
-#define LDT_BUS_ENABLED 2
-#define PCI_DEVICE_MODE 4
+#define PCI_DEVICE_MODE 2
static int bcm1480_bus_status = 0;
#define PCI_BRIDGE_DEVICE 0
-#define LDT_BRIDGE_DEVICE 1
/*
* Read/write 32-bit values in config space.
@@ -95,10 +93,13 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
*/
static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
{
+ u32 devno;
+
if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
return 0;
if (bus->number == 0) {
+ devno = PCI_SLOT(devfn);
if (bcm1480_bus_status & PCI_DEVICE_MODE)
return 0;
else
@@ -175,15 +176,15 @@ struct pci_ops bcm1480_pci_ops = {
static struct resource bcm1480_mem_resource = {
.name = "BCM1480 PCI MEM",
- .start = 0x40000000UL,
- .end = 0x5fffffffUL,
+ .start = 0x30000000UL,
+ .end = 0x3fffffffUL,
.flags = IORESOURCE_MEM,
};
static struct resource bcm1480_io_resource = {
.name = "BCM1480 PCI I/O",
- .start = 0x00000000UL,
- .end = 0x01ffffffUL,
+ .start = 0x2c000000UL,
+ .end = 0x2dffffffUL,
.flags = IORESOURCE_IO,
};
@@ -207,9 +208,9 @@ static int __init bcm1480_pcibios_init(void)
PCIBIOS_MIN_IO = 0x00008000UL;
PCIBIOS_MIN_MEM = 0x01000000UL;
- /* Set I/O resource limits. */
- ioport_resource.end = 0x01ffffffUL; /* 32MB accessible by bcm1480 */
- iomem_resource.end = 0xffffffffUL; /* no HT support yet */
+ /* Set I/O resource limits. - unlimited for now to accomodate HT */
+ ioport_resource.end = 0xffffffffUL;
+ iomem_resource.end = 0xffffffffUL;
cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
new file mode 100644
index 000000000000..aca4a2e7a1c6
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * BCM1480/1455-specific HT support (looking like PCI)
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware. We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap. In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory. Hopefully neither of these should be a huge
+ * problem.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where)
+
+static void *ht_cfg_space;
+
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
+
+static int bcm1480ht_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE 0
+#define HT_BRIDGE_DEVICE 1
+
+/*
+ * HT's level-sensitive interrupts require EOI, which is generated
+ * through a 4MB memory-mapped region
+ */
+unsigned long ht_eoi_space;
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+ return *(u32 *)(ht_cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+ *(u32 *)(ht_cfg_space + (addr & ~3)) = data;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge. Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
+{
+ u32 devno;
+
+ if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+ return 0;
+
+ if (bus->number == 0) {
+ devno = PCI_SLOT(devfn);
+ if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
+ return 0;
+ }
+ return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space. Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (bcm1480ht_can_access(bus, devfn))
+ data = READCFG32(CFGADDR(bus, devfn, where));
+ else
+ data = 0xFFFFFFFF;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 cfgaddr = CFGADDR(bus, devfn, where);
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (!bcm1480ht_can_access(bus, devfn))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = READCFG32(cfgaddr);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ WRITECFG32(cfgaddr, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_get_busno(void)
+{
+ return 0;
+}
+
+struct pci_ops bcm1480ht_pci_ops = {
+ .read = bcm1480ht_pcibios_read,
+ .write = bcm1480ht_pcibios_write,
+};
+
+static struct resource bcm1480ht_mem_resource = {
+ .name = "BCM1480 HT MEM",
+ .start = 0x40000000UL,
+ .end = 0x5fffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm1480ht_io_resource = {
+ .name = "BCM1480 HT I/O",
+ .start = 0x00000000UL,
+ .end = 0x01ffffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480ht_controller = {
+ .pci_ops = &bcm1480ht_pci_ops,
+ .mem_resource = &bcm1480ht_mem_resource,
+ .io_resource = &bcm1480ht_io_resource,
+ .index = 1,
+ .get_busno = bcm1480ht_pcibios_get_busno,
+};
+
+static int __init bcm1480ht_pcibios_init(void)
+{
+ uint32_t cmdreg;
+
+ ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
+
+ /*
+ * See if the PCI bus has been configured by the firmware.
+ */
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+ PCI_COMMAND));
+ if (!(cmdreg & PCI_COMMAND_MASTER)) {
+ printk("HT: Skipping HT probe. Bus is not initialized.\n");
+ iounmap(ht_cfg_space);
+ return 1; /* XXX */
+ }
+ bcm1480ht_bus_status |= PCI_BUS_ENABLED;
+
+ ht_eoi_space = (unsigned long)
+ ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
+ 4 * 1024 * 1024);
+
+ register_pci_controller(&bcm1480ht_controller);
+
+ return 0;
+}
+
+arch_initcall(bcm1480ht_pcibios_init);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 170c6650f961..21402ffd7c98 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -127,15 +127,20 @@ static int __init pcibios_init(void)
if (!hose->iommu)
PCI_DMA_BUS_IS_PHYS = 1;
+ if (hose->get_busno && pci_probe_only)
+ next_busno = (*hose->get_busno)();
+
bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
hose->bus = bus;
hose->need_domain_info = need_domain_info;
- next_busno = bus->subordinate + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
+ if (bus) {
+ next_busno = bus->subordinate + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224) {
+ next_busno = 0;
+ need_domain_info = 1;
+ }
}
continue;
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index 87ced6a5b5dd..6c9ad8171a77 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -40,6 +40,11 @@ struct pci_controller {
unsigned int need_domain_info;
int iommu;
+
+ /* Optional access methods for reading/writing the bus number
+ of the PCI controller */
+ int (*get_busno)(void);
+ void (*set_busno)(int busno);
};
/*