diff options
| -rw-r--r-- | kernel/Makefile | 1 | ||||
| -rw-r--r-- | kernel/watchdog.c | 241 | ||||
| -rw-r--r-- | kernel/watchdog_hld.c | 227 |
3 files changed, 239 insertions, 230 deletions
diff --git a/kernel/Makefile b/kernel/Makefile index eb26e12c6c2a..314e7d62f5f0 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -84,6 +84,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_KGDB) += debug/ obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o +obj-$(CONFIG_HARDLOCKUP_DETECTOR) += watchdog_hld.o obj-$(CONFIG_SECCOMP) += seccomp.o obj-$(CONFIG_RELAY) += relay.o obj-$(CONFIG_SYSCTL) += utsname_sysctl.o diff --git a/kernel/watchdog.c b/kernel/watchdog.c index d21049496e26..d4b0fa01cae3 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -24,7 +24,6 @@ #include <asm/irq_regs.h> #include <linux/kvm_para.h> -#include <linux/perf_event.h> #include <linux/kthread.h> static DEFINE_MUTEX(watchdog_proc_mutex); @@ -80,50 +79,9 @@ static DEFINE_PER_CPU(bool, soft_watchdog_warn); static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts); static DEFINE_PER_CPU(unsigned long, soft_lockup_hrtimer_cnt); static DEFINE_PER_CPU(struct task_struct *, softlockup_task_ptr_saved); -#ifdef CONFIG_HARDLOCKUP_DETECTOR -static DEFINE_PER_CPU(bool, hard_watchdog_warn); -static DEFINE_PER_CPU(bool, watchdog_nmi_touch); static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts_saved); -static DEFINE_PER_CPU(struct perf_event *, watchdog_ev); -#endif static unsigned long soft_lockup_nmi_warn; -/* boot commands */ -/* - * Should we panic when a soft-lockup or hard-lockup occurs: - */ -#ifdef CONFIG_HARDLOCKUP_DETECTOR -unsigned int __read_mostly hardlockup_panic = - CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE; -static unsigned long hardlockup_allcpu_dumped; -/* - * We may not want to enable hard lockup detection by default in all cases, - * for example when running the kernel as a guest on a hypervisor. In these - * cases this function can be called to disable hard lockup detection. This - * function should only be executed once by the boot processor before the - * kernel command line parameters are parsed, because otherwise it is not - * possible to override this in hardlockup_panic_setup(). - */ -void hardlockup_detector_disable(void) -{ - watchdog_enabled &= ~NMI_WATCHDOG_ENABLED; -} - -static int __init hardlockup_panic_setup(char *str) -{ - if (!strncmp(str, "panic", 5)) - hardlockup_panic = 1; - else if (!strncmp(str, "nopanic", 7)) - hardlockup_panic = 0; - else if (!strncmp(str, "0", 1)) - watchdog_enabled &= ~NMI_WATCHDOG_ENABLED; - else if (!strncmp(str, "1", 1)) - watchdog_enabled |= NMI_WATCHDOG_ENABLED; - return 1; -} -__setup("nmi_watchdog=", hardlockup_panic_setup); -#endif - unsigned int __read_mostly softlockup_panic = CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE; @@ -244,30 +202,12 @@ void touch_all_softlockup_watchdogs(void) wq_watchdog_touch(-1); } -#ifdef CONFIG_HARDLOCKUP_DETECTOR -void touch_nmi_watchdog(void) -{ - /* - * Using __raw here because some code paths have - * preemption enabled. If preemption is enabled - * then interrupts should be enabled too, in which - * case we shouldn't have to worry about the watchdog - * going off. - */ - raw_cpu_write(watchdog_nmi_touch, true); - touch_softlockup_watchdog(); -} -EXPORT_SYMBOL(touch_nmi_watchdog); - -#endif - void touch_softlockup_watchdog_sync(void) { __this_cpu_write(softlockup_touch_sync, true); __this_cpu_write(watchdog_touch_ts, 0); } -#ifdef CONFIG_HARDLOCKUP_DETECTOR /* watchdog detector functions */ bool is_hardlockup(void) { @@ -279,7 +219,6 @@ bool is_hardlockup(void) __this_cpu_write(hrtimer_interrupts_saved, hrint); return false; } -#endif static int is_softlockup(unsigned long touch_ts) { @@ -293,77 +232,22 @@ static int is_softlockup(unsigned long touch_ts) return 0; } -#ifdef CONFIG_HARDLOCKUP_DETECTOR - -static struct perf_event_attr wd_hw_attr = { - .type = PERF_TYPE_HARDWARE, - .config = PERF_COUNT_HW_CPU_CYCLES, - .size = sizeof(struct perf_event_attr), - .pinned = 1, - .disabled = 1, -}; - -/* Callback function for perf event subsystem */ -static void watchdog_overflow_callback(struct perf_event *event, - struct perf_sample_data *data, - struct pt_regs *regs) -{ - /* Ensure the watchdog never gets throttled */ - event->hw.interrupts = 0; - - if (__this_cpu_read(watchdog_nmi_touch) == true) { - __this_cpu_write(watchdog_nmi_touch, false); - return; - } - - /* check for a hardlockup - * This is done by making sure our timer interrupt - * is incrementing. The timer interrupt should have - * fired multiple times before we overflow'd. If it hasn't - * then this is a good indication the cpu is stuck - */ - if (is_hardlockup()) { - int this_cpu = smp_processor_id(); - - /* only print hardlockups once */ - if (__this_cpu_read(hard_watchdog_warn) == true) - return; - - pr_emerg("Watchdog detected hard LOCKUP on cpu %d", this_cpu); - print_modules(); - print_irqtrace_events(current); - if (regs) - show_regs(regs); - else - dump_stack(); - - /* - * Perform all-CPU dump only once to avoid multiple hardlockups - * generating interleaving traces - */ - if (sysctl_hardlockup_all_cpu_backtrace && - !test_and_set_bit(0, &hardlockup_allcpu_dumped)) - trigger_allbutself_cpu_backtrace(); - - if (hardlockup_panic) - nmi_panic(regs, "Hard LOCKUP"); - - __this_cpu_write(hard_watchdog_warn, true); - return; - } - - __this_cpu_write(hard_watchdog_warn, false); - return; -} -#endif /* CONFIG_HARDLOCKUP_DETECTOR */ - static void watchdog_interrupt_count(void) { __this_cpu_inc(hrtimer_interrupts); } -static int watchdog_nmi_enable(unsigned int cpu); -static void watchdog_nmi_disable(unsigned int cpu); +/* + * These two functions are mostly architecture specific + * defining them as weak here. + */ +int __weak watchdog_nmi_enable(unsigned int cpu) +{ + return 0; +} +void __weak watchdog_nmi_disable(unsigned int cpu) +{ +} static int watchdog_enable_all_cpus(void); static void watchdog_disable_all_cpus(void); @@ -556,109 +440,6 @@ static void watchdog(unsigned int cpu) watchdog_nmi_disable(cpu); } -#ifdef CONFIG_HARDLOCKUP_DETECTOR -/* - * People like the simple clean cpu node info on boot. - * Reduce the watchdog noise by only printing messages - * that are different from what cpu0 displayed. - */ -static unsigned long cpu0_err; - -static int watchdog_nmi_enable(unsigned int cpu) -{ - struct perf_event_attr *wd_attr; - struct perf_event *event = per_cpu(watchdog_ev, cpu); - - /* nothing to do if the hard lockup detector is disabled */ - if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED)) - goto out; - - /* is it already setup and enabled? */ - if (event && event->state > PERF_EVENT_STATE_OFF) - goto out; - - /* it is setup but not enabled */ - if (event != NULL) - goto out_enable; - - wd_attr = &wd_hw_attr; - wd_attr->sample_period = hw_nmi_get_sample_period(watchdog_thresh); - - /* Try to register using hardware perf events */ - event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL); - - /* save cpu0 error for future comparision */ - if (cpu == 0 && IS_ERR(event)) - cpu0_err = PTR_ERR(event); - - if (!IS_ERR(event)) { - /* only print for cpu0 or different than cpu0 */ - if (cpu == 0 || cpu0_err) - pr_info("enabled on all CPUs, permanently consumes one hw-PMU counter.\n"); - goto out_save; - } - - /* - * Disable the hard lockup detector if _any_ CPU fails to set up - * set up the hardware perf event. The watchdog() function checks - * the NMI_WATCHDOG_ENABLED bit periodically. - * - * The barriers are for syncing up watchdog_enabled across all the - * cpus, as clear_bit() does not use barriers. - */ - smp_mb__before_atomic(); - clear_bit(NMI_WATCHDOG_ENABLED_BIT, &watchdog_enabled); - smp_mb__after_atomic(); - - /* skip displaying the same error again */ - if (cpu > 0 && (PTR_ERR(event) == cpu0_err)) - return PTR_ERR(event); - - /* vary the KERN level based on the returned errno */ - if (PTR_ERR(event) == -EOPNOTSUPP) - pr_info("disabled (cpu%i): not supported (no LAPIC?)\n", cpu); - else if (PTR_ERR(event) == -ENOENT) - pr_warn("disabled (cpu%i): hardware events not enabled\n", - cpu); - else - pr_err("disabled (cpu%i): unable to create perf event: %ld\n", - cpu, PTR_ERR(event)); - - pr_info("Shutting down hard lockup detector on all cpus\n"); - - return PTR_ERR(event); - - /* success path */ -out_save: - per_cpu(watchdog_ev, cpu) = event; -out_enable: - perf_event_enable(per_cpu(watchdog_ev, cpu)); -out: - return 0; -} - -static void watchdog_nmi_disable(unsigned int cpu) -{ - struct perf_event *event = per_cpu(watchdog_ev, cpu); - - if (event) { - perf_event_disable(event); - per_cpu(watchdog_ev, cpu) = NULL; - - /* should be in cleanup, but blocks oprofile */ - perf_event_release_kernel(event); - } - if (cpu == 0) { - /* watchdog_nmi_enable() expects this to be zero initially. */ - cpu0_err = 0; - } -} - -#else -static int watchdog_nmi_enable(unsigned int cpu) { return 0; } -static void watchdog_nmi_disable(unsigned int cpu) { return; } -#endif /* CONFIG_HARDLOCKUP_DETECTOR */ - static struct smp_hotplug_thread watchdog_threads = { .store = &softlockup_watchdog, .thread_should_run = watchdog_should_run, diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c new file mode 100644 index 000000000000..84016c8aee6b --- /dev/null +++ b/kernel/watchdog_hld.c @@ -0,0 +1,227 @@ +/* + * Detect hard lockups on a system + * + * started by Don Zickus, Copyright (C) 2010 Red Hat, Inc. + * + * Note: Most of this code is borrowed heavily from the original softlockup + * detector, so thanks to Ingo for the initial implementation. + * Some chunks also taken from the old x86-specific nmi watchdog code, thanks + * to those contributors as well. + */ + +#define pr_fmt(fmt) "NMI watchdog: " fmt + +#include <linux/nmi.h> +#include <linux/module.h> +#include <asm/irq_regs.h> +#include <linux/perf_event.h> + +static DEFINE_PER_CPU(bool, hard_watchdog_warn); +static DEFINE_PER_CPU(bool, watchdog_nmi_touch); +static DEFINE_PER_CPU(struct perf_event *, watchdog_ev); + +/* boot commands */ +/* + * Should we panic when a soft-lockup or hard-lockup occurs: + */ +unsigned int __read_mostly hardlockup_panic = + CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE; +static unsigned long hardlockup_allcpu_dumped; +/* + * We may not want to enable hard lockup detection by default in all cases, + * for example when running the kernel as a guest on a hypervisor. In these + * cases this function can be called to disable hard lockup detection. This + * function should only be executed once by the boot processor before the + * kernel command line parameters are parsed, because otherwise it is not + * possible to override this in hardlockup_panic_setup(). + */ +void hardlockup_detector_disable(void) +{ + watchdog_enabled &= ~NMI_WATCHDOG_ENABLED; +} + +static int __init hardlockup_panic_setup(char *str) +{ + if (!strncmp(str, "panic", 5)) + hardlockup_panic = 1; + else if (!strncmp(str, "nopanic", 7)) + hardlockup_panic = 0; + else if (!strncmp(str, "0", 1)) + watchdog_enabled &= ~NMI_WATCHDOG_ENABLED; + else if (!strncmp(str, "1", 1)) + watchdog_enabled |= NMI_WATCHDOG_ENABLED; + return 1; +} +__setup("nmi_watchdog=", hardlockup_panic_setup); + +void touch_nmi_watchdog(void) +{ + /* + * Using __raw here because some code paths have + * preemption enabled. If preemption is enabled + * then interrupts should be enabled too, in which + * case we shouldn't have to worry about the watchdog + * going off. + */ + raw_cpu_write(watchdog_nmi_touch, true); + touch_softlockup_watchdog(); +} +EXPORT_SYMBOL(touch_nmi_watchdog); + +static struct perf_event_attr wd_hw_attr = { + .type = PERF_TYPE_HARDWARE, + .config = PERF_COUNT_HW_CPU_CYCLES, + .size = sizeof(struct perf_event_attr), + .pinned = 1, + .disabled = 1, +}; + +/* Callback function for perf event subsystem */ +static void watchdog_overflow_callback(struct perf_event *event, + struct perf_sample_data *data, + struct pt_regs *regs) +{ + /* Ensure the watchdog never gets throttled */ + event->hw.interrupts = 0; + + if (__this_cpu_read(watchdog_nmi_touch) == true) { + __this_cpu_write(watchdog_nmi_touch, false); + return; + } + + /* check for a hardlockup + * This is done by making sure our timer interrupt + * is incrementing. The timer interrupt should have + * fired multiple times before we overflow'd. If it hasn't + * then this is a good indication the cpu is stuck + */ + if (is_hardlockup()) { + int this_cpu = smp_processor_id(); + + /* only print hardlockups once */ + if (__this_cpu_read(hard_watchdog_warn) == true) + return; + + pr_emerg("Watchdog detected hard LOCKUP on cpu %d", this_cpu); + print_modules(); + print_irqtrace_events(current); + if (regs) + show_regs(regs); + else + dump_stack(); + + /* + * Perform all-CPU dump only once to avoid multiple hardlockups + * generating interleaving traces + */ + if (sysctl_hardlockup_all_cpu_backtrace && + !test_and_set_bit(0, &hardlockup_allcpu_dumped)) + trigger_allbutself_cpu_backtrace(); + + if (hardlockup_panic) + nmi_panic(regs, "Hard LOCKUP"); + + __this_cpu_write(hard_watchdog_warn, true); + return; + } + + __this_cpu_write(hard_watchdog_warn, false); + return; +} + +/* + * People like the simple clean cpu node info on boot. + * Reduce the watchdog noise by only printing messages + * that are different from what cpu0 displayed. + */ +static unsigned long cpu0_err; + +int watchdog_nmi_enable(unsigned int cpu) +{ + struct perf_event_attr *wd_attr; + struct perf_event *event = per_cpu(watchdog_ev, cpu); + + /* nothing to do if the hard lockup detector is disabled */ + if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED)) + goto out; + + /* is it already setup and enabled? */ + if (event && event->state > PERF_EVENT_STATE_OFF) + goto out; + + /* it is setup but not enabled */ + if (event != NULL) + goto out_enable; + + wd_attr = &wd_hw_attr; + wd_attr->sample_period = hw_nmi_get_sample_period(watchdog_thresh); + + /* Try to register using hardware perf events */ + event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL); + + /* save cpu0 error for future comparision */ + if (cpu == 0 && IS_ERR(event)) + cpu0_err = PTR_ERR(event); + + if (!IS_ERR(event)) { + /* only print for cpu0 or different than cpu0 */ + if (cpu == 0 || cpu0_err) + pr_info("enabled on all CPUs, permanently consumes one hw-PMU counter.\n"); + goto out_save; + } + + /* + * Disable the hard lockup detector if _any_ CPU fails to set up + * set up the hardware perf event. The watchdog() function checks + * the NMI_WATCHDOG_ENABLED bit periodically. + * + * The barriers are for syncing up watchdog_enabled across all the + * cpus, as clear_bit() does not use barriers. + */ + smp_mb__before_atomic(); + clear_bit(NMI_WATCHDOG_ENABLED_BIT, &watchdog_enabled); + smp_mb__after_atomic(); + + /* skip displaying the same error again */ + if (cpu > 0 && (PTR_ERR(event) == cpu0_err)) + return PTR_ERR(event); + + /* vary the KERN level based on the returned errno */ + if (PTR_ERR(event) == -EOPNOTSUPP) + pr_info("disabled (cpu%i): not supported (no LAPIC?)\n", cpu); + else if (PTR_ERR(event) == -ENOENT) + pr_warn("disabled (cpu%i): hardware events not enabled\n", + cpu); + else + pr_err("disabled (cpu%i): unable to create perf event: %ld\n", + cpu, PTR_ERR(event)); + + pr_info("Shutting down hard lockup detector on all cpus\n"); + + return PTR_ERR(event); + + /* success path */ +out_save: + per_cpu(watchdog_ev, cpu) = event; +out_enable: + perf_event_enable(per_cpu(watchdog_ev, cpu)); +out: + return 0; +} + +void watchdog_nmi_disable(unsigned int cpu) +{ + struct perf_event *event = per_cpu(watchdog_ev, cpu); + + if (event) { + perf_event_disable(event); + per_cpu(watchdog_ev, cpu) = NULL; + + /* should be in cleanup, but blocks oprofile */ + perf_event_release_kernel(event); + } + if (cpu == 0) { + /* watchdog_nmi_enable() expects this to be zero initially. */ + cpu0_err = 0; + } +} |