diff options
| -rw-r--r-- | drivers/usb/host/ehci-q.c | 13 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 2 | ||||
| -rw-r--r-- | drivers/usb/typec/tcpm/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/usb/usbip/usbip_common.c | 3 | ||||
| -rw-r--r-- | drivers/usb/usbip/vhci_rx.c | 13 |
5 files changed, 26 insertions, 6 deletions
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index aa2f77f1506d..8a5c9b3ebe1e 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -27,6 +27,10 @@ /*-------------------------------------------------------------------------*/ +/* PID Codes that are used here, from EHCI specification, Table 3-16. */ +#define PID_CODE_IN 1 +#define PID_CODE_SETUP 2 + /* fill a qtd, returning how much of the buffer we were able to queue up */ static int @@ -190,7 +194,7 @@ static int qtd_copy_status ( int status = -EINPROGRESS; /* count IN/OUT bytes, not SETUP (even short packets) */ - if (likely (QTD_PID (token) != 2)) + if (likely(QTD_PID(token) != PID_CODE_SETUP)) urb->actual_length += length - QTD_LENGTH (token); /* don't modify error codes */ @@ -206,6 +210,13 @@ static int qtd_copy_status ( if (token & QTD_STS_BABBLE) { /* FIXME "must" disable babbling device's port too */ status = -EOVERFLOW; + /* + * When MMF is active and PID Code is IN, queue is halted. + * EHCI Specification, Table 4-13. + */ + } else if ((token & QTD_STS_MMF) && + (QTD_PID(token) == PID_CODE_IN)) { + status = -EPROTO; /* CERR nonzero + halt --> stall */ } else if (QTD_CERR(token)) { status = -EPIPE; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 2907fe4d78dd..4917c5b033fa 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -519,7 +519,6 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) retval = xhci_resume(xhci, hibernated); return retval; } -#endif /* CONFIG_PM */ static void xhci_pci_shutdown(struct usb_hcd *hcd) { @@ -532,6 +531,7 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd) if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) pci_set_power_state(pdev, PCI_D3hot); } +#endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig index 72481bbb2af3..5b986d6c801d 100644 --- a/drivers/usb/typec/tcpm/Kconfig +++ b/drivers/usb/typec/tcpm/Kconfig @@ -32,6 +32,7 @@ endif # TYPEC_TCPCI config TYPEC_FUSB302 tristate "Fairchild FUSB302 Type-C chip driver" depends on I2C + depends on EXTCON || !EXTCON help The Fairchild FUSB302 Type-C chip driver that works with Type-C Port Controller Manager to provide USB PD and USB diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c index 6532d68e8808..e4b96674c405 100644 --- a/drivers/usb/usbip/usbip_common.c +++ b/drivers/usb/usbip/usbip_common.c @@ -727,6 +727,9 @@ int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb) copy -= recv; ret += recv; + + if (!copy) + break; } if (ret != size) diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c index 33f8972ba842..00fc98741c5d 100644 --- a/drivers/usb/usbip/vhci_rx.c +++ b/drivers/usb/usbip/vhci_rx.c @@ -77,16 +77,21 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, usbip_pack_pdu(pdu, urb, USBIP_RET_SUBMIT, 0); /* recv transfer buffer */ - if (usbip_recv_xbuff(ud, urb) < 0) - return; + if (usbip_recv_xbuff(ud, urb) < 0) { + urb->status = -EPROTO; + goto error; + } /* recv iso_packet_descriptor */ - if (usbip_recv_iso(ud, urb) < 0) - return; + if (usbip_recv_iso(ud, urb) < 0) { + urb->status = -EPROTO; + goto error; + } /* restore the padding in iso packets */ usbip_pad_iso(ud, urb); +error: if (usbip_dbg_flag_vhci_rx) usbip_dump_urb(urb); |