diff options
| -rw-r--r-- | drivers/net/phy/broadcom.c | 16 | ||||
| -rw-r--r-- | include/linux/brcmphy.h | 4 |
2 files changed, 18 insertions, 2 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index f9c25912eb98..e86ea105c802 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -54,6 +54,8 @@ static int bcm54210e_config_init(struct phy_device *phydev) static int bcm54612e_config_init(struct phy_device *phydev) { + int reg; + /* Clear TX internal delay unless requested. */ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) { @@ -65,8 +67,6 @@ static int bcm54612e_config_init(struct phy_device *phydev) /* Clear RX internal delay unless requested. */ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) { - u16 reg; - reg = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); /* Disable RXD to RXC delay (default set) */ @@ -77,6 +77,18 @@ static int bcm54612e_config_init(struct phy_device *phydev) MII_BCM54XX_AUXCTL_MISC_WREN | reg); } + /* Enable CLK125 MUX on LED4 if ref clock is enabled. */ + if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) { + int err; + + reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0); + err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0, + BCM54612E_LED4_CLK125OUT_EN | reg); + + if (err < 0) + return err; + } + return 0; } diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index b324e01ccf2d..daa9234a9baf 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -85,6 +85,7 @@ #define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ #define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ #define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ +#define MII_BCM54XX_EXP_SEL_ETC 0x0d00 /* Expansion register spare + 2k mem */ #define MII_BCM54XX_AUX_CTL 0x18 /* Auxiliary control register */ #define MII_BCM54XX_ISR 0x1a /* BCM54xx interrupt status register */ @@ -219,6 +220,9 @@ #define BCM54810_SHD_CLK_CTL 0x3 #define BCM54810_SHD_CLK_CTL_GTXCLK_EN (1 << 9) +/* BCM54612E Registers */ +#define BCM54612E_EXP_SPARE0 (MII_BCM54XX_EXP_SEL_ETC + 0x34) +#define BCM54612E_LED4_CLK125OUT_EN (1 << 1) /*****************************************************************************/ /* Fast Ethernet Transceiver definitions. */ |