summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/ixgbe/ixgbe_82599.c78
-rw-r--r--drivers/net/ixgbe/ixgbe_main.c11
-rw-r--r--drivers/net/ixgbe/ixgbe_type.h1
3 files changed, 54 insertions, 36 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 1f30e163bd9c..b405a00817c6 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -39,6 +39,7 @@
#define IXGBE_82599_MC_TBL_SIZE 128
#define IXGBE_82599_VFT_TBL_SIZE 128
+void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
@@ -68,7 +69,9 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
if (hw->phy.multispeed_fiber) {
/* Set up dual speed SFP+ support */
mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
} else {
+ mac->ops.flap_tx_laser = NULL;
if ((mac->ops.get_media_type(hw) ==
ixgbe_media_type_backplane) &&
(hw->phy.smart_speed == ixgbe_smart_speed_auto ||
@@ -413,6 +416,41 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
}
/**
+ * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * When the driver changes the link speeds that it can support,
+ * it sets autotry_restart to true to indicate that we need to
+ * initiate a new autotry session with the link partner. To do
+ * so, we set the speed then disable and re-enable the tx laser, to
+ * alert the link partner that it also needs to restart autotry on its
+ * end. This is consistent with true clause 37 autoneg, which also
+ * involves a loss of signal.
+ **/
+void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ hw_dbg(hw, "ixgbe_flap_tx_laser_multispeed_fiber\n");
+
+ if (hw->mac.autotry_restart) {
+ /* Disable tx laser; allow 100us to go dark per spec */
+ esdp_reg |= IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(100);
+
+ /* Enable tx laser; allow 100ms to light up */
+ esdp_reg &= ~IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ msleep(100);
+
+ hw->mac.autotry_restart = false;
+ }
+}
+
+/**
* ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
* @hw: pointer to hardware structure
* @speed: new link speed
@@ -440,16 +478,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
speed &= phy_link_speed;
/*
- * When the driver changes the link speeds that it can support,
- * it sets autotry_restart to true to indicate that we need to
- * initiate a new autotry session with the link partner. To do
- * so, we set the speed then disable and re-enable the tx laser, to
- * alert the link partner that it also needs to restart autotry on its
- * end. This is consistent with true clause 37 autoneg, which also
- * involves a loss of signal.
- */
-
- /*
* Try each speed one by one, highest priority first. We do this in
* software because 10gb fiber doesn't support speed autonegotiation.
*/
@@ -466,6 +494,7 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
/* Set the module link speed */
esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
/* Allow module to change analog characteristics (1G->10G) */
msleep(40);
@@ -478,19 +507,7 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
return status;
/* Flap the tx laser if it has not already been done */
- if (hw->mac.autotry_restart) {
- /* Disable tx laser; allow 100us to go dark per spec */
- esdp_reg |= IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- udelay(100);
-
- /* Enable tx laser; allow 2ms to light up per spec */
- esdp_reg &= ~IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- msleep(2);
-
- hw->mac.autotry_restart = false;
- }
+ hw->mac.ops.flap_tx_laser(hw);
/*
* Wait for the controller to acquire link. Per IEEE 802.3ap,
@@ -525,6 +542,7 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
esdp_reg &= ~IXGBE_ESDP_SDP5;
esdp_reg |= IXGBE_ESDP_SDP5_DIR;
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
/* Allow module to change analog characteristics (10G->1G) */
msleep(40);
@@ -537,19 +555,7 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
return status;
/* Flap the tx laser if it has not already been done */
- if (hw->mac.autotry_restart) {
- /* Disable tx laser; allow 100us to go dark per spec */
- esdp_reg |= IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- udelay(100);
-
- /* Enable tx laser; allow 2ms to light up per spec */
- esdp_reg &= ~IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- msleep(2);
-
- hw->mac.autotry_restart = false;
- }
+ hw->mac.ops.flap_tx_laser(hw);
/* Wait for the link partner to also set speed */
msleep(100);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 684af371462d..b858a1a79d0e 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -5018,6 +5018,7 @@ static void ixgbe_multispeed_fiber_task(struct work_struct *work)
autoneg = hw->phy.autoneg_advertised;
if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
+ hw->mac.autotry_restart = false;
if (hw->mac.ops.setup_link)
hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
@@ -6380,6 +6381,16 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
del_timer_sync(&adapter->sfp_timer);
cancel_work_sync(&adapter->watchdog_task);
cancel_work_sync(&adapter->sfp_task);
+ if (adapter->hw.phy.multispeed_fiber) {
+ struct ixgbe_hw *hw = &adapter->hw;
+ /*
+ * Restart clause 37 autoneg, disable and re-enable
+ * the tx laser, to clear & alert the link partner
+ * that it needs to restart autotry
+ */
+ hw->mac.autotry_restart = true;
+ hw->mac.ops.flap_tx_laser(hw);
+ }
cancel_work_sync(&adapter->multispeed_fiber_task);
cancel_work_sync(&adapter->sfp_config_module_task);
if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 2be907466593..0ed5ab37cc53 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -2397,6 +2397,7 @@ struct ixgbe_mac_operations {
s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
/* Link */
+ void (*flap_tx_laser)(struct ixgbe_hw *);
s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 18:54:58 +0000