diff options
1447 files changed, 46712 insertions, 18484 deletions
diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata new file mode 100644 index 000000000000..0a932155cbba --- /dev/null +++ b/Documentation/ABI/testing/sysfs-ata @@ -0,0 +1,99 @@ +What: /sys/class/ata_... +Date: August 2008 +Contact: Gwendal Grignou<gwendal@google.com> +Description: + +Provide a place in sysfs for storing the ATA topology of the system. This allows +retrieving various information about ATA objects. + +Files under /sys/class/ata_port +------------------------------- + + For each port, a directory ataX is created where X is the ata_port_id of + the port. The device parent is the ata host device. + +idle_irq (read) + + Number of IRQ received by the port while idle [some ata HBA only]. + +nr_pmp_links (read) + + If a SATA Port Multiplier (PM) is connected, number of link behind it. + +Files under /sys/class/ata_link +------------------------------- + + Behind each port, there is a ata_link. If there is a SATA PM in the + topology, 15 ata_link objects are created. + + If a link is behind a port, the directory name is linkX, where X is + ata_port_id of the port. + If a link is behind a PM, its name is linkX.Y where X is ata_port_id + of the parent port and Y the PM port. + +hw_sata_spd_limit + + Maximum speed supported by the connected SATA device. + +sata_spd_limit + + Maximum speed imposed by libata. + +sata_spd + + Current speed of the link [1.5, 3Gps,...]. + +Files under /sys/class/ata_device +--------------------------------- + + Behind each link, up to two ata device are created. + The name of the directory is devX[.Y].Z where: + - X is ata_port_id of the port where the device is connected, + - Y the port of the PM if any, and + - Z the device id: for PATA, there is usually 2 devices [0,1], + only 1 for SATA. + +class + Device class. Can be "ata" for disk, "atapi" for packet device, + "pmp" for PM, or "none" if no device was found behind the link. + +dma_mode + + Transfer modes supported by the device when in DMA mode. + Mostly used by PATA device. + +pio_mode + + Transfer modes supported by the device when in PIO mode. + Mostly used by PATA device. + +xfer_mode + + Current transfer mode. + +id + + Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17. + Only valid if the device is not a PM. + +gscr + + Cached result of the dump of PM GSCR register. + Valid registers are: + 0: SATA_PMP_GSCR_PROD_ID, + 1: SATA_PMP_GSCR_REV, + 2: SATA_PMP_GSCR_PORT_INFO, + 32: SATA_PMP_GSCR_ERROR, + 33: SATA_PMP_GSCR_ERROR_EN, + 64: SATA_PMP_GSCR_FEAT, + 96: SATA_PMP_GSCR_FEAT_EN, + 130: SATA_PMP_GSCR_SII_GPIO + Only valid if the device is a PM. + +spdn_cnt + + Number of time libata decided to lower the speed of link due to errors. + +ering + + Formatted output of the error ring of the device. diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power index 6123c523bfd7..7628cd1bc36a 100644 --- a/Documentation/ABI/testing/sysfs-devices-power +++ b/Documentation/ABI/testing/sysfs-devices-power @@ -77,3 +77,91 @@ Description: devices this attribute is set to "enabled" by bus type code or device drivers and in that cases it should be safe to leave the default value. + +What: /sys/devices/.../power/wakeup_count +Date: September 2010 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../wakeup_count attribute contains the number + of signaled wakeup events associated with the device. This + attribute is read-only. If the device is not enabled to wake up + the system from sleep states, this attribute is empty. + +What: /sys/devices/.../power/wakeup_active_count +Date: September 2010 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../wakeup_active_count attribute contains the + number of times the processing of wakeup events associated with + the device was completed (at the kernel level). This attribute + is read-only. If the device is not enabled to wake up the + system from sleep states, this attribute is empty. + +What: /sys/devices/.../power/wakeup_hit_count +Date: September 2010 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../wakeup_hit_count attribute contains the + number of times the processing of a wakeup event associated with + the device might prevent the system from entering a sleep state. + This attribute is read-only. If the device is not enabled to + wake up the system from sleep states, this attribute is empty. + +What: /sys/devices/.../power/wakeup_active +Date: September 2010 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../wakeup_active attribute contains either 1, + or 0, depending on whether or not a wakeup event associated with + the device is being processed (1). This attribute is read-only. + If the device is not enabled to wake up the system from sleep + states, this attribute is empty. + +What: /sys/devices/.../power/wakeup_total_time_ms +Date: September 2010 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../wakeup_total_time_ms attribute contains + the total time of processing wakeup events associated with the + device, in milliseconds. This attribute is read-only. If the + device is not enabled to wake up the system from sleep states, + this attribute is empty. + +What: /sys/devices/.../power/wakeup_max_time_ms +Date: September 2010 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../wakeup_max_time_ms attribute contains + the maximum time of processing a single wakeup event associated + with the device, in milliseconds. This attribute is read-only. + If the device is not enabled to wake up the system from sleep + states, this attribute is empty. + +What: /sys/devices/.../power/wakeup_last_time_ms +Date: September 2010 +Contact: Rafael J. Wysocki <rjw@sisk.pl> +Description: + The /sys/devices/.../wakeup_last_time_ms attribute contains + the value of the monotonic clock corresponding to the time of + signaling the last wakeup event associated with the device, in + milliseconds. This attribute is read-only. If the device is + not enabled to wake up the system from sleep states, this + attribute is empty. + +What: /sys/devices/.../power/autosuspend_delay_ms +Date: September 2010 +Contact: Alan Stern <stern@rowland.harvard.edu> +Description: + The /sys/devices/.../power/autosuspend_delay_ms attribute + contains the autosuspend delay value (in milliseconds). Some + drivers do not want their device to suspend as soon as it + becomes idle at run time; they want the device to remain + inactive for a certain minimum period of time first. That + period is called the autosuspend delay. Negative values will + prevent the device from being suspended at run time (similar + to writing "on" to the power/control attribute). Values >= + 1000 will cause the autosuspend timer expiration to be rounded + up to the nearest second. + + Not all drivers support this attribute. If it isn't supported, + attempts to read or write it will yield I/O errors. diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 2875f1f74a07..194ca446ac28 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -99,9 +99,38 @@ Description: dmesg -s 1000000 | grep 'hash matches' + If you do not get any matches (or they appear to be false + positives), it is possible that the last PM event point + referred to a device created by a loadable kernel module. In + this case cat /sys/power/pm_trace_dev_match (see below) after + your system is started up and the kernel modules are loaded. + CAUTION: Using it will cause your machine's real-time (CMOS) clock to be set to a random invalid time after a resume. +What; /sys/power/pm_trace_dev_match +Date: October 2010 +Contact: James Hogan <james@albanarts.com> +Description: + The /sys/power/pm_trace_dev_match file contains the name of the + device associated with the last PM event point saved in the RTC + across reboots when pm_trace has been used. More precisely it + contains the list of current devices (including those + registered by loadable kernel modules since boot) which match + the device hash in the RTC at boot, with a newline after each + one. + + The advantage of this file over the hash matches printed to the + kernel log (see /sys/power/pm_trace), is that it includes + devices created after boot by loadable kernel modules. + + Due to the small hash size necessary to fit in the RTC, it is + possible that more than one device matches the hash, in which + case further investigation is required to determine which + device is causing the problem. Note that genuine RTC clock + values (such as when pm_trace has not been used), can still + match a device and output it's name here. + What: /sys/power/pm_async Date: January 2009 Contact: Rafael J. Wysocki <rjw@sisk.pl> diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 7f5fc3ba9c91..ecf7d04bca26 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -6,6 +6,8 @@ Interrupts - ARM Interrupt subsystem documentation IXP2000 - Release Notes for Linux on Intel's IXP2000 Network Processor +msm + - MSM specific documentation Netwinder - Netwinder specific documentation Porting diff --git a/Documentation/arm/msm/gpiomux.txt b/Documentation/arm/msm/gpiomux.txt new file mode 100644 index 000000000000..67a81620adf6 --- /dev/null +++ b/Documentation/arm/msm/gpiomux.txt @@ -0,0 +1,176 @@ +This document provides an overview of the msm_gpiomux interface, which +is used to provide gpio pin multiplexing and configuration on mach-msm +targets. + +History +======= + +The first-generation API for gpio configuration & multiplexing on msm +is the function gpio_tlmm_config(). This function has a few notable +shortcomings, which led to its deprecation and replacement by gpiomux: + +The 'disable' parameter: Setting the second parameter to +gpio_tlmm_config to GPIO_CFG_DISABLE tells the peripheral +processor in charge of the subsystem to perform a look-up into a +low-power table and apply the low-power/sleep setting for the pin. +As the msm family evolved this became problematic. Not all pins +have sleep settings, not all peripheral processors will accept requests +to apply said sleep settings, and not all msm targets have their gpio +subsystems managed by a peripheral processor. In order to get consistent +behavior on all targets, drivers are forced to ignore this parameter, +rendering it useless. + +The 'direction' flag: for all mux-settings other than raw-gpio (0), +the output-enable bit of a gpio is hard-wired to a known +input (usually VDD or ground). For those settings, the direction flag +is meaningless at best, and deceptive at worst. In addition, using the +direction flag to change output-enable (OE) directly can cause trouble in +gpiolib, which has no visibility into gpio direction changes made +in this way. Direction control in gpio mode should be made through gpiolib. + +Key Features of gpiomux +======================= + +- A consistent interface across all generations of msm. Drivers can expect +the same results on every target. +- gpiomux plays nicely with gpiolib. Functions that should belong to gpiolib +are left to gpiolib and not duplicated here. gpiomux is written with the +intent that gpio_chips will call gpiomux reference-counting methods +from their request() and free() hooks, providing full integration. +- Tabular configuration. Instead of having to call gpio_tlmm_config +hundreds of times, gpio configuration is placed in a single table. +- Per-gpio sleep. Each gpio is individually reference counted, allowing only +those lines which are in use to be put in high-power states. +- 0 means 'do nothing': all flags are designed so that the default memset-zero +equates to a sensible default of 'no configuration', preventing users +from having to provide hundreds of 'no-op' configs for unused or +unwanted lines. + +Usage +===== + +To use gpiomux, provide configuration information for relevant gpio lines +in the msm_gpiomux_configs table. Since a 0 equates to "unconfigured", +only those lines to be managed by gpiomux need to be specified. Here +is a completely fictional example: + +struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { + [12] = { + .active = GPIOMUX_VALID | GPIOMUX_DRV_8MA | GPIOMUX_FUNC_1, + .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, + }, + [34] = { + .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, + }, +}; + +To indicate that a gpio is in use, call msm_gpiomux_get() to increase +its reference count. To decrease the reference count, call msm_gpiomux_put(). + +The effect of this configuration is as follows: + +When the system boots, gpios 12 and 34 will be initialized with their +'suspended' configurations. All other gpios, which were left unconfigured, +will not be touched. + +When msm_gpiomux_get() is called on gpio 12 to raise its reference count +above 0, its active configuration will be applied. Since no other gpio +line has a valid active configuration, msm_gpiomux_get() will have no +effect on any other line. + +When msm_gpiomux_put() is called on gpio 12 or 34 to drop their reference +count to 0, their suspended configurations will be applied. +Since no other gpio line has a valid suspended configuration, no other +gpio line will be effected by msm_gpiomux_put(). Since gpio 34 has no valid +active configuration, this is effectively a no-op for gpio 34 as well, +with one small caveat, see the section "About Output-Enable Settings". + +All of the GPIOMUX_VALID flags may seem like unnecessary overhead, but +they address some important issues. As unused entries (all those +except 12 and 34) are zero-filled, gpiomux needs a way to distinguish +the used fields from the unused. In addition, the all-zero pattern +is a valid configuration! Therefore, gpiomux defines an additional bit +which is used to indicate when a field is used. This has the pleasant +side-effect of allowing calls to msm_gpiomux_write to use '0' to indicate +that a value should not be changed: + + msm_gpiomux_write(0, GPIOMUX_VALID, 0); + +replaces the active configuration of gpio 0 with an all-zero configuration, +but leaves the suspended configuration as it was. + +Static Configurations +===================== + +To install a static configuration, which is applied at boot and does +not change after that, install a configuration with a suspended component +but no active component, as in the previous example: + + [34] = { + .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, + }, + +The suspended setting is applied during boot, and the lack of any valid +active setting prevents any other setting from being applied at runtime. +If other subsystems attempting to access the line is a concern, one could +*really* anchor the configuration down by calling msm_gpiomux_get on the +line at initialization to move the line into active mode. With the line +held, it will never be re-suspended, and with no valid active configuration, +no new configurations will be applied. + +But then, if having other subsystems grabbing for the line is truly a concern, +it should be reserved with gpio_request instead, which carries an implicit +msm_gpiomux_get. + +gpiomux and gpiolib +=================== + +It is expected that msm gpio_chips will call msm_gpiomux_get() and +msm_gpiomux_put() from their request and free hooks, like this fictional +example: + +static int request(struct gpio_chip *chip, unsigned offset) +{ + return msm_gpiomux_get(chip->base + offset); +} + +static void free(struct gpio_chip *chip, unsigned offset) +{ + msm_gpiomux_put(chip->base + offset); +} + + ...somewhere in a gpio_chip declaration... + .request = request, + .free = free, + +This provides important functionality: +- It guarantees that a gpio line will have its 'active' config applied + when the line is requested, and will not be suspended while the line + remains requested; and +- It guarantees that gpio-direction settings from gpiolib behave sensibly. + See "About Output-Enable Settings." + +This mechanism allows for "auto-request" of gpiomux lines via gpiolib +when it is suitable. Drivers wishing more exact control are, of course, +free to also use msm_gpiomux_set and msm_gpiomux_get. + +About Output-Enable Settings +============================ + +Some msm targets do not have the ability to query the current gpio +configuration setting. This means that changes made to the output-enable +(OE) bit by gpiolib cannot be consistently detected and preserved by gpiomux. +Therefore, when gpiomux applies a configuration setting, any direction +settings which may have been applied by gpiolib are lost and the default +input settings are re-applied. + +For this reason, drivers should not assume that gpio direction settings +continue to hold if they free and then re-request a gpio. This seems like +common sense - after all, anybody could have obtained the line in the +meantime - but it needs saying. + +This also means that calls to msm_gpiomux_write will reset the OE bit, +which means that if the gpio line is held by a client of gpiolib and +msm_gpiomux_write is called, the direction setting has been lost and +gpiolib's internal state has been broken. +Release gpio lines before reconfiguring them. diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 1f7ae144f6d8..5393e6611691 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -87,3 +87,10 @@ dir_resv_level= (*) By default, directory reservations will scale with file reservations - users should rarely need to change this value. If allocation reservations are turned off, this option will have no effect. +coherency=full (*) Disallow concurrent O_DIRECT writes, cluster inode + lock will be taken to force other nodes drop cache, + therefore full cluster coherency is guaranteed even + for O_DIRECT writes. +coherency=buffered Allow concurrent O_DIRECT writes without EX lock among + nodes, which gains high performance at risk of getting + stale data on other nodes. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 3a0009e03d14..02f21d9220ce 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2170,6 +2170,11 @@ and is between 256 and 4096 characters. It is defined in the file in <PAGE_SIZE> units (needed only for swap files). See Documentation/power/swsusp-and-swap-files.txt + hibernate= [HIBERNATION] + noresume Don't check if there's a hibernation image + present during boot. + nocompress Don't compress/decompress hibernation images. + retain_initrd [RAM] Keep initrd memory after extraction rhash_entries= [KNL,NET] diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt index 26c0f9c00545..dd04361dd361 100644 --- a/Documentation/pcmcia/driver-changes.txt +++ b/Documentation/pcmcia/driver-changes.txt @@ -1,4 +1,29 @@ This file details changes in 2.6 which affect PCMCIA card driver authors: +* pcmcia_loop_config() and autoconfiguration (as of 2.6.36) + If struct pcmcia_device *p_dev->config_flags is set accordingly, + pcmcia_loop_config() now sets up certain configuration values + automatically, though the driver may still override the settings + in the callback function. The following autoconfiguration options + are provided at the moment: + CONF_AUTO_CHECK_VCC : check for matching Vcc + CONF_AUTO_SET_VPP : set Vpp + CONF_AUTO_AUDIO : auto-enable audio line, if required + CONF_AUTO_SET_IO : set ioport resources (->resource[0,1]) + CONF_AUTO_SET_IOMEM : set first iomem resource (->resource[2]) + +* pcmcia_request_configuration -> pcmcia_enable_device (as of 2.6.36) + pcmcia_request_configuration() got renamed to pcmcia_enable_device(), + as it mirrors pcmcia_disable_device(). Configuration settings are now + stored in struct pcmcia_device, e.g. in the fields config_flags, + config_index, config_base, vpp. + +* pcmcia_request_window changes (as of 2.6.36) + Instead of win_req_t, drivers are now requested to fill out + struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four ioport + ranges. After a call to pcmcia_request_window(), the regions found there + are reserved and may be used immediately -- until pcmcia_release_window() + is called. + * pcmcia_request_io changes (as of 2.6.36) Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX index fb742c213c9e..45e9d4a91284 100644 --- a/Documentation/power/00-INDEX +++ b/Documentation/power/00-INDEX @@ -14,6 +14,8 @@ interface.txt - Power management user interface in /sys/power notifiers.txt - Registering suspend notifiers in device drivers +opp.txt + - Operating Performance Point library pci.txt - How the PCI Subsystem Does Power Management pm_qos_interface.txt diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt index e67211fe0ee2..c537834af005 100644 --- a/Documentation/power/interface.txt +++ b/Documentation/power/interface.txt @@ -57,7 +57,7 @@ smallest image possible. In particular, if "0" is written to this file, the suspend image will be as small as possible. Reading from this file will display the current image size limit, which -is set to 500 MB by default. +is set to 2/5 of available RAM by default. /sys/power/pm_trace controls the code which saves the last PM event point in the RTC across reboots, so that you can debug a machine that just hangs diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt new file mode 100644 index 000000000000..44d87ad3cea9 --- /dev/null +++ b/Documentation/power/opp.txt @@ -0,0 +1,375 @@ +*=============* +* OPP Library * +*=============* + +(C) 2009-2010 Nishanth Menon <nm@ti.com>, Texas Instruments Incorporated + +Contents +-------- +1. Introduction +2. Initial OPP List Registration +3. OPP Search Functions +4. OPP Availability Control Functions +5. OPP Data Retrieval Functions +6. Cpufreq Table Generation +7. Data Structures + +1. Introduction +=============== +Complex SoCs of today consists of a multiple sub-modules working in conjunction. +In an operational system executing varied use cases, not all modules in the SoC +need to function at their highest performing frequency all the time. To +facilitate this, sub-modules in a SoC are grouped into domains, allowing some +domains to run at lower voltage and frequency while other domains are loaded +more. The set of discrete tuples consisting of frequency and voltage pairs that +the device will support per domain are called Operating Performance Points or +OPPs. + +OPP library provides a set of helper functions to organize and query the OPP +information. The library is located in drivers/base/power/opp.c and the header +is located in include/linux/opp.h. OPP library can be enabled by enabling +CONFIG_PM_OPP from power management menuconfig menu. OPP library depends on +CONFIG_PM as certain SoCs such as Texas Instrument's OMAP framework allows to +optionally boot at a certain OPP without needing cpufreq. + +Typical usage of the OPP library is as follows: +(users) -> registers a set of default OPPs -> (library) +SoC framework -> modifies on required cases certain OPPs -> OPP layer + -> queries to search/retrieve information -> + +OPP layer expects each domain to be represented by a unique device pointer. SoC +framework registers a set of initial OPPs per device with the OPP layer. This +list is expected to be an optimally small number typically around 5 per device. +This initial list contains a set of OPPs that the framework expects to be safely +enabled by default in the system. + +Note on OPP Availability: +------------------------ +As the system proceeds to operate, SoC framework may choose to make certain +OPPs available or not available on each device based on various external +factors. Example usage: Thermal management or other exceptional situations where +SoC framework might choose to disable a higher frequency OPP to safely continue +operations until that OPP could be re-enabled if possible. + +OPP library facilitates this concept in it's implementation. The following +operational functions operate only on available opps: +opp_find_freq_{ceil, floor}, opp_get_voltage, opp_get_freq, opp_get_opp_count +and opp_init_cpufreq_table + +opp_find_freq_exact is meant to be used to find the opp pointer which can then +be used for opp_enable/disable functions to make an opp available as required. + +WARNING: Users of OPP library should refresh their availability count using +get_opp_count if opp_enable/disable functions are invoked for a device, the +exact mechanism to trigger these or the notification mechanism to other +dependent subsystems such as cpufreq are left to the discretion of the SoC +specific framework which uses the OPP library. Similar care needs to be taken +care to refresh the cpufreq table in cases of these operations. + +WARNING on OPP List locking mechanism: +------------------------------------------------- +OPP library uses RCU for exclusivity. RCU allows the query functions to operate +in multiple contexts and this synchronization mechanism is optimal for a read +intensive operations on data structure as the OPP library caters to. + +To ensure that the data retrieved are sane, the users such as SoC framework +should ensure that the section of code operating on OPP queries are locked +using RCU read locks. The opp_find_freq_{exact,ceil,floor}, +opp_get_{voltage, freq, opp_count} fall into this category. + +opp_{add,enable,disable} are updaters which use mutex and implement it's own +RCU locking mechanisms. opp_init_cpufreq_table acts as an updater and uses +mutex to implment RCU updater strategy. These functions should *NOT* be called +under RCU locks and other contexts that prevent blocking functions in RCU or +mutex operations from working. + +2. Initial OPP List Registration +================================ +The SoC implementation calls opp_add function iteratively to add OPPs per +device. It is expected that the SoC framework will register the OPP entries +optimally- typical numbers range to be less than 5. The list generated by +registering the OPPs is maintained by OPP library throughout the device +operation. The SoC framework can subsequently control the availability of the +OPPs dynamically using the opp_enable / disable functions. + +opp_add - Add a new OPP for a specific domain represented by the device pointer. + The OPP is defined using the frequency and voltage. Once added, the OPP + is assumed to be available and control of it's availability can be done + with the opp_enable/disable functions. OPP library internally stores + and manages this information in the opp struct. This function may be + used by SoC framework to define a optimal list as per the demands of + SoC usage environment. + + WARNING: Do not use this function in interrupt context. + + Example: + soc_pm_init() + { + /* Do things */ + r = opp_add(mpu_dev, 1000000, 900000); + if (!r) { + pr_err("%s: unable to register mpu opp(%d)\n", r); + goto no_cpufreq; + } + /* Do cpufreq things */ + no_cpufreq: + /* Do remaining things */ + } + +3. OPP Search Functions +======================= +High level framework such as cpufreq operates on frequencies. To map the +frequency back to the corresponding OPP, OPP library provides handy functions +to search the OPP list that OPP library internally manages. These search +functions return the matching pointer representing the opp if a match is +found, else returns error. These errors are expected to be handled by standard +error checks such as IS_ERR() and appropriate actions taken by the caller. + +opp_find_freq_exact - Search for an OPP based on an *exact* frequency and + availability. This function is especially useful to enable an OPP which + is not available by default. + Example: In a case when SoC framework detects a situation where a + higher frequency could be made available, it can use this function to + find the OPP prior to call the opp_enable to actually make it available. + rcu_read_lock(); + opp = opp_find_freq_exact(dev, 1000000000, false); + rcu_read_unlock(); + /* dont operate on the pointer.. just do a sanity check.. */ + if (IS_ERR(opp)) { + pr_err("frequency not disabled!\n"); + /* trigger appropriate actions.. */ + } else { + opp_enable(dev,1000000000); + } + + NOTE: This is the only search function that operates on OPPs which are + not available. + +opp_find_freq_floor - Search for an available OPP which is *at most* the + provided frequency. This function is useful while searching for a lesser + match OR operating on OPP information in the order of decreasing + frequency. + Example: To find the highest opp for a device: + freq = ULONG_MAX; + rcu_read_lock(); + opp_find_freq_floor(dev, &freq); + rcu_read_unlock(); + +opp_find_freq_ceil - Search for an available OPP which is *at least* the + provided frequency. This function is useful while searching for a + higher match OR operating on OPP information in the order of increasing + frequency. + Example 1: To find the lowest opp for a device: + freq = 0; + rcu_read_lock(); + opp_find_freq_ceil(dev, &freq); + rcu_read_unlock(); + Example 2: A simplified implementation of a SoC cpufreq_driver->target: + soc_cpufreq_target(..) + { + /* Do stuff like policy checks etc. */ + /* Find the best frequency match for the req */ + rcu_read_lock(); + opp = opp_find_freq_ceil(dev, &freq); + rcu_read_unlock(); + if (!IS_ERR(opp)) + soc_switch_to_freq_voltage(freq); + else + /* do something when we cant satisfy the req */ + /* do other stuff */ + } + +4. OPP Availability Control Functions +===================================== +A default OPP list registered with the OPP library may not cater to all possible +situation. The OPP library provides a set of functions to modify the +availability of a OPP within the OPP list. This allows SoC frameworks to have +fine grained dynamic control of which sets of OPPs are operationally available. +These functions are intended to *temporarily* remove an OPP in conditions such +as thermal considerations (e.g. don't use OPPx until the temperature drops). + +WARNING: Do not use these functions in interrupt context. + +opp_enable - Make a OPP available for operation. + Example: Lets say that 1GHz OPP is to be made available only if the + SoC temperature is lower than a certain threshold. The SoC framework + implementation might choose to do something as follows: + if (cur_temp < temp_low_thresh) { + /* Enable 1GHz if it was disabled */ + rcu_read_lock(); + opp = opp_find_freq_exact(dev, 1000000000, false); + rcu_read_unlock(); + /* just error check */ + if (!IS_ERR(opp)) + ret = opp_enable(dev, 1000000000); + else + goto try_something_else; + } + +opp_disable - Make an OPP to be not available for operation + Example: Lets say that 1GHz OPP is to be disabled if the temperature + exceeds a threshold value. The SoC framework implementation might + choose to do something as follows: + if (cur_temp > temp_high_thresh) { + /* Disable 1GHz if it was enabled */ + rcu_read_lock(); + opp = opp_find_freq_exact(dev, 1000000000, true); + rcu_read_unlock(); + /* just error check */ + if (!IS_ERR(opp)) + ret = opp_disable(dev, 1000000000); + else + goto try_something_else; + } + +5. OPP Data Retrieval Functions +=============================== +Since OPP library abstracts away the OPP information, a set of functions to pull +information from the OPP structure is necessary. Once an OPP pointer is +retrieved using the search functions, the following functions can be used by SoC +framework to retrieve the information represented inside the OPP layer. + +opp_get_voltage - Retrieve the voltage represented by the opp pointer. + Example: At a cpufreq transition to a different frequency, SoC + framework requires to set the voltage represented by the OPP using + the regulator framework to the Power Management chip providing the + voltage. + soc_switch_to_freq_voltage(freq) + { + /* do things */ + rcu_read_lock(); + opp = opp_find_freq_ceil(dev, &freq); + v = opp_get_voltage(opp); + rcu_read_unlock(); + if (v) + regulator_set_voltage(.., v); + /* do other things */ + } + +opp_get_freq - Retrieve the freq represented by the opp pointer. + Example: Lets say the SoC framework uses a couple of helper functions + we could pass opp pointers instead of doing additional parameters to + handle quiet a bit of data parameters. + soc_cpufreq_target(..) + { + /* do things.. */ + max_freq = ULONG_MAX; + rcu_read_lock(); + max_opp = opp_find_freq_floor(dev,&max_freq); + requested_opp = opp_find_freq_ceil(dev,&freq); + if (!IS_ERR(max_opp) && !IS_ERR(requested_opp)) + r = soc_test_validity(max_opp, requested_opp); + rcu_read_unlock(); + /* do other things */ + } + soc_test_validity(..) + { + if(opp_get_voltage(max_opp) < opp_get_voltage(requested_opp)) + return -EINVAL; + if(opp_get_freq(max_opp) < opp_get_freq(requested_opp)) + return -EINVAL; + /* do things.. */ + } + +opp_get_opp_count - Retrieve the number of available opps for a device + Example: Lets say a co-processor in the SoC needs to know the available + frequencies in a table, the main processor can notify as following: + soc_notify_coproc_available_frequencies() + { + /* Do things */ + rcu_read_lock(); + num_available = opp_get_opp_count(dev); + speeds = kzalloc(sizeof(u32) * num_available, GFP_KERNEL); + /* populate the table in increasing order */ + freq = 0; + while (!IS_ERR(opp = opp_find_freq_ceil(dev, &freq))) { + speeds[i] = freq; + freq++; + i++; + } + rcu_read_unlock(); + + soc_notify_coproc(AVAILABLE_FREQs, speeds, num_available); + /* Do other things */ + } + +6. Cpufreq Table Generation +=========================== +opp_init_cpufreq_table - cpufreq framework typically is initialized with + cpufreq_frequency_table_cpuinfo which is provided with the list of + frequencies that are available for operation. This function provides + a ready to use conversion routine to translate the OPP layer's internal + information about the available frequencies into a format readily + providable to cpufreq. + + WARNING: Do not use this function in interrupt context. + + Example: + soc_pm_init() + { + /* Do things */ + r = opp_init_cpufreq_table(dev, &freq_table); + if (!r) + cpufreq_frequency_table_cpuinfo(policy, freq_table); + /* Do other things */ + } + + NOTE: This function is available only if CONFIG_CPU_FREQ is enabled in + addition to CONFIG_PM as power management feature is required to + dynamically scale voltage and frequency in a system. + +7. Data Structures +================== +Typically an SoC contains multiple voltage domains which are variable. Each +domain is represented by a device pointer. The relationship to OPP can be +represented as follows: +SoC + |- device 1 + | |- opp 1 (availability, freq, voltage) + | |- opp 2 .. + ... ... + | `- opp n .. + |- device 2 + ... + `- device m + +OPP library maintains a internal list that the SoC framework populates and +accessed by various functions as described above. However, the structures +representing the actual OPPs and domains are internal to the OPP library itself +to allow for suitable abstraction reusable across systems. + +struct opp - The internal data structure of OPP library which is used to + represent an OPP. In addition to the freq, voltage, availability + information, it also contains internal book keeping information required + for the OPP library to operate on. Pointer to this structure is + provided back to the users such as SoC framework to be used as a + identifier for OPP in the interactions with OPP layer. + + WARNING: The struct opp pointer should not be parsed or modified by the + users. The defaults of for an instance is populated by opp_add, but the + availability of the OPP can be modified by opp_enable/disable functions. + +struct device - This is used to identify a domain to the OPP layer. The + nature of the device and it's implementation is left to the user of + OPP library such as the SoC framework. + +Overall, in a simplistic view, the data structure operations is represented as +following: + +Initialization / modification: + +-----+ /- opp_enable +opp_add --> | opp | <------- + | +-----+ \- opp_disable + \-------> domain_info(device) + +Search functions: + /-- opp_find_freq_ceil ---\ +-----+ +domain_info<---- opp_find_freq_exact -----> | opp | + \-- opp_find_freq_floor ---/ +-----+ + +Retrieval functions: ++-----+ /- opp_get_voltage +| opp | <--- ++-----+ \- opp_get_freq + +domain_info <- opp_get_opp_count diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 55b859b3bc72..489e9bacd165 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -1,6 +1,7 @@ Run-time Power Management Framework for I/O Devices (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. +(C) 2010 Alan Stern <stern@rowland.harvard.edu> 1. Introduction @@ -157,7 +158,8 @@ rules: to execute it, the other callbacks will not be executed for the same device. * A request to execute ->runtime_resume() will cancel any pending or - scheduled requests to execute the other callbacks for the same device. + scheduled requests to execute the other callbacks for the same device, + except for scheduled autosuspends. 3. Run-time PM Device Fields @@ -165,7 +167,7 @@ The following device run-time PM fields are present in 'struct dev_pm_info', as defined in include/linux/pm.h: struct timer_list suspend_timer; - - timer used for scheduling (delayed) suspend request + - timer used for scheduling (delayed) suspend and autosuspend requests unsigned long timer_expires; - timer expiration time, in jiffies (if this is different from zero, the @@ -230,6 +232,28 @@ defined in include/linux/pm.h: interface; it may only be modified with the help of the pm_runtime_allow() and pm_runtime_forbid() helper functions + unsigned int no_callbacks; + - indicates that the device does not use the run-time PM callbacks (see + Section 8); it may be modified only by the pm_runtime_no_callbacks() + helper function + + unsigned int use_autosuspend; + - indicates that the device's driver supports delayed autosuspend (see + Section 9); it may be modified only by the + pm_runtime{_dont}_use_autosuspend() helper functions + + unsigned int timer_autosuspends; + - indicates that the PM core should attempt to carry out an autosuspend + when the timer expires rather than a normal suspend + + int autosuspend_delay; + - the delay time (in milliseconds) to be used for autosuspend + + unsigned long last_busy; + - the time (in jiffies) when the pm_runtime_mark_last_busy() helper + function was last called for this device; used in calculating inactivity + periods for autosuspend + All of the above fields are members of the 'power' member of 'struct device'. 4. Run-time PM Device Helper Functions @@ -255,6 +279,12 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt to suspend the device again in future + int pm_runtime_autosuspend(struct device *dev); + - same as pm_runtime_suspend() except that the autosuspend delay is taken + into account; if pm_runtime_autosuspend_expiration() says the delay has + not yet expired then an autosuspend is scheduled for the appropriate time + and 0 is returned + int pm_runtime_resume(struct device *dev); - execute the subsystem-level resume callback for the device; returns 0 on success, 1 if the device's run-time PM status was already 'active' or @@ -267,6 +297,11 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: device (the request is represented by a work item in pm_wq); returns 0 on success or error code if the request has not been queued up + int pm_request_autosuspend(struct device *dev); + - schedule the execution of the subsystem-level suspend callback for the + device when the autosuspend delay has expired; if the delay has already + expired then the work item is queued up immediately + int pm_schedule_suspend(struct device *dev, unsigned int delay); - schedule the execution of the subsystem-level suspend callback for the device in future, where 'delay' is the time to wait before queuing up a @@ -298,12 +333,20 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: - decrement the device's usage counter int pm_runtime_put(struct device *dev); - - decrement the device's usage counter, run pm_request_idle(dev) and return - its result + - decrement the device's usage counter; if the result is 0 then run + pm_request_idle(dev) and return its result + + int pm_runtime_put_autosuspend(struct device *dev); + - decrement the device's usage counter; if the result is 0 then run + pm_request_autosuspend(dev) and return its result int pm_runtime_put_sync(struct device *dev); - - decrement the device's usage counter, run pm_runtime_idle(dev) and return - its result + - decrement the device's usage counter; if the result is 0 then run + pm_runtime_idle(dev) and return its result + + int pm_runtime_put_sync_autosuspend(struct device *dev); + - decrement the device's usage counter; if the result is 0 then run + pm_runtime_autosuspend(dev) and return its result void pm_runtime_enable(struct device *dev); - enable the run-time PM helper functions to run the device bus type's @@ -349,19 +392,51 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: counter (used by the /sys/devices/.../power/control interface to effectively prevent the device from being power managed at run time) + void pm_runtime_no_callbacks(struct device *dev); + - set the power.no_callbacks flag for the device and remove the run-time + PM attributes from /sys/devices/.../power (or prevent them from being + added when the device is registered) + + void pm_runtime_mark_last_busy(struct device *dev); + - set the power.last_busy field to the current time + + void pm_runtime_use_autosuspend(struct device *dev); + - set the power.use_autosuspend flag, enabling autosuspend delays + + void pm_runtime_dont_use_autosuspend(struct device *dev); + - clear the power.use_autosuspend flag, disabling autosuspend delays + + void pm_runtime_set_autosuspend_delay(struct device *dev, int delay); + - set the power.autosuspend_delay value to 'delay' (expressed in + milliseconds); if 'delay' is negative then run-time suspends are + prevented + + unsigned long pm_runtime_autosuspend_expiration(struct device *dev); + - calculate the time when the current autosuspend delay period will expire, + based on power.last_busy and power.autosuspend_delay; if the delay time + is 1000 ms or larger then the expiration time is rounded up to the + nearest second; returns 0 if the delay period has already expired or + power.use_autosuspend isn't set, otherwise returns the expiration time + in jiffies + It is safe to execute the following helper functions from interrupt context: pm_request_idle() +pm_request_autosuspend() pm_schedule_suspend() pm_request_resume() pm_runtime_get_noresume() pm_runtime_get() pm_runtime_put_noidle() pm_runtime_put() +pm_runtime_put_autosuspend() +pm_runtime_enable() pm_suspend_ignore_children() pm_runtime_set_active() pm_runtime_set_suspended() -pm_runtime_enable() +pm_runtime_suspended() +pm_runtime_mark_last_busy() +pm_runtime_autosuspend_expiration() 5. Run-time PM Initialization, Device Probing and Removal @@ -524,3 +599,141 @@ poweroff and run-time suspend callback, and similarly for system resume, thaw, restore, and run-time resume, can achieve this with the help of the UNIVERSAL_DEV_PM_OPS macro defined in include/linux/pm.h (possibly setting its last argument to NULL). + +8. "No-Callback" Devices + +Some "devices" are only logical sub-devices of their parent and cannot be +power-managed on their own. (The prototype example is a USB interface. Entire +USB devices can go into low-power mode or send wake-up requests, but neither is +possible for individual interfaces.) The drivers for these devices have no +need of run-time PM callbacks; if the callbacks did exist, ->runtime_suspend() +and ->runtime_resume() would always return 0 without doing anything else and +->runtime_idle() would always call pm_runtime_suspend(). + +Subsystems can tell the PM core about these devices by calling +pm_runtime_no_callbacks(). This should be done after the device structure is +initialized and before it is registered (although after device registration is +also okay). The routine will set the device's power.no_callbacks flag and +prevent the non-debugging run-time PM sysfs attributes from being created. + +When power.no_callbacks is set, the PM core will not invoke the +->runtime_idle(), ->runtime_suspend(), or ->runtime_resume() callbacks. +Instead it will assume that suspends and resumes always succeed and that idle +devices should be suspended. + +As a consequence, the PM core will never directly inform the device's subsystem +or driver about run-time power changes. Instead, the driver for the device's +parent must take responsibility for telling the device's driver when the +parent's power state changes. + +9. Autosuspend, or automatically-delayed suspends + +Changing a device's power state isn't free; it requires both time and energy. +A device should be put in a low-power state only when there's some reason to +think it will remain in that state for a substantial time. A common heuristic +says that a device which hasn't been used for a while is liable to remain +unused; following this advice, drivers should not allow devices to be suspended +at run-time until they have been inactive for some minimum period. Even when +the heuristic ends up being non-optimal, it will still prevent devices from +"bouncing" too rapidly between low-power and full-power states. + +The term "autosuspend" is an historical remnant. It doesn't mean that the +device is automatically suspended (the subsystem or driver still has to call +the appropriate PM routines); rather it means that run-time suspends will +automatically be delayed until the desired period of inactivity has elapsed. + +Inactivity is determined based on the power.last_busy field. Drivers should +call pm_runtime_mark_last_busy() to update this field after carrying out I/O, +typically just before calling pm_runtime_put_autosuspend(). The desired length +of the inactivity period is a matter of policy. Subsystems can set this length +initially by calling pm_runtime_set_autosuspend_delay(), but after device +registration the length should be controlled by user space, using the +/sys/devices/.../power/autosuspend_delay_ms attribute. + +In order to use autosuspend, subsystems or drivers must call +pm_runtime_use_autosuspend() (preferably before registering the device), and +thereafter they should use the various *_autosuspend() helper functions instead +of the non-autosuspend counterparts: + + Instead of: pm_runtime_suspend use: pm_runtime_autosuspend; + Instead of: pm_schedule_suspend use: pm_request_autosuspend; + Instead of: pm_runtime_put use: pm_runtime_put_autosuspend; + Instead of: pm_runtime_put_sync use: pm_runtime_put_sync_autosuspend. + +Drivers may also continue to use the non-autosuspend helper functions; they +will behave normally, not taking the autosuspend delay into account. +Similarly, if the power.use_autosuspend field isn't set then the autosuspend +helper functions will behave just like the non-autosuspend counterparts. + +The implementation is well suited for asynchronous use in interrupt contexts. +However such use inevitably involves races, because the PM core can't +synchronize ->runtime_suspend() callbacks with the arrival of I/O requests. +This synchronization must be handled by the driver, using its private lock. +Here is a schematic pseudo-code example: + + foo_read_or_write(struct foo_priv *foo, void *data) + { + lock(&foo->private_lock); + add_request_to_io_queue(foo, data); + if (foo->num_pending_requests++ == 0) + pm_runtime_get(&foo->dev); + if (!foo->is_suspended) + foo_process_next_request(foo); + unlock(&foo->private_lock); + } + + foo_io_completion(struct foo_priv *foo, void *req) + { + lock(&foo->private_lock); + if (--foo->num_pending_requests == 0) { + pm_runtime_mark_last_busy(&foo->dev); + pm_runtime_put_autosuspend(&foo->dev); + } else { + foo_process_next_request(foo); + } + unlock(&foo->private_lock); + /* Send req result back to the user ... */ + } + + int foo_runtime_suspend(struct device *dev) + { + struct foo_priv foo = container_of(dev, ...); + int ret = 0; + + lock(&foo->private_lock); + if (foo->num_pending_requests > 0) { + ret = -EBUSY; + } else { + /* ... suspend the device ... */ + foo->is_suspended = 1; + } + unlock(&foo->private_lock); + return ret; + } + + int foo_runtime_resume(struct device *dev) + { + struct foo_priv foo = container_of(dev, ...); + + lock(&foo->private_lock); + /* ... resume the device ... */ + foo->is_suspended = 0; + pm_runtime_mark_last_busy(&foo->dev); + if (foo->num_pending_requests > 0) + foo_process_requests(foo); + unlock(&foo->private_lock); + return 0; + } + +The important point is that after foo_io_completion() asks for an autosuspend, +the foo_runtime_suspend() callback may race with foo_read_or_write(). +Therefore foo_runtime_suspend() has to check whether there are any pending I/O +requests (while holding the private lock) before allowing the suspend to +proceed. + +In addition, the power.autosuspend_delay field can be changed by user space at +any time. If a driver cares about this, it can call +pm_runtime_autosuspend_expiration() from within the ->runtime_suspend() +callback while holding its private lock. If the function returns a nonzero +value then the delay has not yet expired and the callback should return +-EAGAIN. diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt index 514b94fc931e..1bdfa0443773 100644 --- a/Documentation/power/s2ram.txt +++ b/Documentation/power/s2ram.txt @@ -49,6 +49,13 @@ machine that doesn't boot) is: device (lspci and /sys/devices/pci* is your friend), and see if you can fix it, disable it, or trace into its resume function. + If no device matches the hash (or any matches appear to be false positives), + the culprit may be a device from a loadable kernel module that is not loaded + until after the hash is checked. You can check the hash against the current + devices again after more modules are loaded using sysfs: + + cat /sys/power/pm_trace_dev_match + For example, the above happens to be the VGA device on my EVO, which I used to run with "radeonfb" (it's an ATI Radeon mobility). It turns out that "radeonfb" simply cannot resume that device - it tries to set the diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index 9d60ab717a7b..ea718891a665 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -66,7 +66,8 @@ swsusp saves the state of the machine into active swaps and then reboots or powerdowns. You must explicitly specify the swap partition to resume from with ``resume='' kernel option. If signature is found it loads and restores saved state. If the option ``noresume'' is specified as a boot parameter, it skips -the resuming. +the resuming. If the option ``hibernate=nocompress'' is specified as a boot +parameter, it saves hibernation image without compression. In the meantime while the system is suspended you should not add/remove any of the hardware, write to the filesystems, etc. diff --git a/Documentation/powerpc/dts-bindings/fsl/spi.txt b/Documentation/powerpc/dts-bindings/fsl/spi.txt index 80510c018eea..777abd7399d5 100644 --- a/Documentation/powerpc/dts-bindings/fsl/spi.txt +++ b/Documentation/powerpc/dts-bindings/fsl/spi.txt @@ -1,7 +1,9 @@ * SPI (Serial Peripheral Interface) Required properties: -- cell-index : SPI controller index. +- cell-index : QE SPI subblock index. + 0: QE subblock SPI1 + 1: QE subblock SPI2 - compatible : should be "fsl,spi". - mode : the SPI operation mode, it can be "cpu" or "cpu-qe". - reg : Offset and length of the register set for the device @@ -29,3 +31,23 @@ Example: gpios = <&gpio 18 1 // device reg=<0> &gpio 19 1>; // device reg=<1> }; + + +* eSPI (Enhanced Serial Peripheral Interface) + +Required properties: +- compatible : should be "fsl,mpc8536-espi". +- reg : Offset and length of the register set for the device. +- interrupts : should contain eSPI interrupt, the device has one interrupt. +- fsl,espi-num-chipselects : the number of the chipselect signals. + +Example: + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2>; + interrupt-parent = <&mpic>; + fsl,espi-num-chipselects = <4>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 6f5b5b2b528d..b618b1e86c46 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -990,11 +990,23 @@ S: Supported F: arch/arm/mach-shmobile/ F: drivers/sh/ +ARM/TELECHIPS ARM ARCHITECTURE +M: "Hans J. Koch" <hjk@linutronix.de> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/plat-tcc/ +F: arch/arm/mach-tcc8k/ + ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +ARM/TETON BGA MACHINE SUPPORT +M: Mark F. Brown <mark.brown314@gmail.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained + ARM/THECUS N2100 MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -554,8 +554,15 @@ endif ifdef CONFIG_FRAME_POINTER KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls else +# Some targets (ARM with Thumb2, for example), can't be built with frame +# pointers. For those, we don't have FUNCTION_TRACER automatically +# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is +# incompatible with -fomit-frame-pointer with current GCC, so we don't use +# -fomit-frame-pointer with FUNCTION_TRACER. +ifndef CONFIG_FUNCTION_TRACER KBUILD_CFLAGS += -fomit-frame-pointer endif +endif ifdef CONFIG_DEBUG_INFO KBUILD_CFLAGS += -g diff --git a/arch/alpha/include/asm/irqflags.h b/arch/alpha/include/asm/irqflags.h new file mode 100644 index 000000000000..299bbc7e9d71 --- /dev/null +++ b/arch/alpha/include/asm/irqflags.h @@ -0,0 +1,67 @@ +#ifndef __ALPHA_IRQFLAGS_H +#define __ALPHA_IRQFLAGS_H + +#include <asm/system.h> + +#define IPL_MIN 0 +#define IPL_SW0 1 +#define IPL_SW1 2 +#define IPL_DEV0 3 +#define IPL_DEV1 4 +#define IPL_TIMER 5 +#define IPL_PERF 6 +#define IPL_POWERFAIL 6 +#define IPL_MCHECK 7 +#define IPL_MAX 7 + +#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK +#undef IPL_MIN +#define IPL_MIN __min_ipl +extern int __min_ipl; +#endif + +#define getipl() (rdps() & 7) +#define setipl(ipl) ((void) swpipl(ipl)) + +static inline unsigned long arch_local_save_flags(void) +{ + return rdps(); +} + +static inline void arch_local_irq_disable(void) +{ + setipl(IPL_MAX); + barrier(); +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags = swpipl(IPL_MAX); + barrier(); + return flags; +} + +static inline void arch_local_irq_enable(void) +{ + barrier(); + setipl(IPL_MIN); +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + barrier(); + setipl(flags); + barrier(); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return flags == IPL_MAX; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(getipl()); +} + +#endif /* __ALPHA_IRQFLAGS_H */ diff --git a/arch/alpha/include/asm/system.h b/arch/alpha/include/asm/system.h index 5aa40cca4f23..9f78e6934637 100644 --- a/arch/alpha/include/asm/system.h +++ b/arch/alpha/include/asm/system.h @@ -259,34 +259,6 @@ __CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long); __CALL_PAL_W1(wrusp, unsigned long); __CALL_PAL_W1(wrvptptr, unsigned long); -#define IPL_MIN 0 -#define IPL_SW0 1 -#define IPL_SW1 2 -#define IPL_DEV0 3 -#define IPL_DEV1 4 -#define IPL_TIMER 5 -#define IPL_PERF 6 -#define IPL_POWERFAIL 6 -#define IPL_MCHECK 7 -#define IPL_MAX 7 - -#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK -#undef IPL_MIN -#define IPL_MIN __min_ipl -extern int __min_ipl; -#endif - -#define getipl() (rdps() & 7) -#define setipl(ipl) ((void) swpipl(ipl)) - -#define local_irq_disable() do { setipl(IPL_MAX); barrier(); } while(0) -#define local_irq_enable() do { barrier(); setipl(IPL_MIN); } while(0) -#define local_save_flags(flags) ((flags) = rdps()) -#define local_irq_save(flags) do { (flags) = swpipl(IPL_MAX); barrier(); } while(0) -#define local_irq_restore(flags) do { barrier(); setipl(flags); barrier(); } while(0) - -#define irqs_disabled() (getipl() == IPL_MAX) - /* * TB routines.. */ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9103904b3dab..3849887157e7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -19,6 +19,8 @@ config ARM select HAVE_KPROBES if (!XIP_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) + select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) + select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) select HAVE_GENERIC_DMA_COHERENT select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZO @@ -27,6 +29,7 @@ config ARM select HAVE_PERF_EVENTS select PERF_USE_VMALLOC select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7)) help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -146,6 +149,9 @@ config ARCH_HAS_CPUFREQ and that the relevant menu configurations are displayed for it. +config ARCH_HAS_CPU_IDLE_WAIT + def_bool y + config GENERIC_HWEIGHT bool default y @@ -511,6 +517,7 @@ config ARCH_MMP select GENERIC_CLOCKEVENTS select TICK_ONESHOT select PLAT_PXA + select SPARSE_IRQ help Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. @@ -588,6 +595,7 @@ config ARCH_PXA select GENERIC_CLOCKEVENTS select TICK_ONESHOT select PLAT_PXA + select SPARSE_IRQ help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. @@ -679,8 +687,8 @@ config ARCH_S3C64XX help Samsung S3C64XX series based systems -config ARCH_S5P6440 - bool "Samsung S5P6440" +config ARCH_S5P64X0 + bool "Samsung S5P6440 S5P6450" select CPU_V6 select GENERIC_GPIO select HAVE_CLK @@ -689,7 +697,8 @@ config ARCH_S5P6440 select HAVE_S3C2410_I2C select HAVE_S3C_RTC help - Samsung S5P6440 CPU based systems + Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, + SMDK6450. config ARCH_S5P6442 bool "Samsung S5P6442" @@ -748,6 +757,15 @@ config ARCH_SHARK Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). +config ARCH_TCC_926 + bool "Telechips TCC ARM926-based systems" + select CPU_ARM926T + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_CLOCKEVENTS + help + Support for Telechips TCC ARM926-based systems. + config ARCH_LH7A40X bool "Sharp LH7A40X" select CPU_ARM922T @@ -916,6 +934,8 @@ source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-spear/Kconfig" +source "arch/arm/plat-tcc/Kconfig" + if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" @@ -929,7 +949,7 @@ if ARCH_S3C64XX source "arch/arm/mach-s3c64xx/Kconfig" endif -source "arch/arm/mach-s5p6440/Kconfig" +source "arch/arm/mach-s5p64x0/Kconfig" source "arch/arm/mach-s5p6442/Kconfig" @@ -1003,7 +1023,7 @@ endif config ARM_ERRATA_411920 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" - depends on CPU_V6 && !SMP + depends on CPU_V6 help Invalidation of the Instruction Cache operation can fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. @@ -1182,13 +1202,13 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ - ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) + depends on EXPERIMENTAL depends on GENERIC_CLOCKEVENTS + depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ + ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\ - ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 + select HAVE_ARM_SCU help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1206,6 +1226,19 @@ config SMP If you don't know what to do here, say N. +config SMP_ON_UP + bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on SMP && !XIP && !THUMB2_KERNEL + default y + help + SMP kernels contain instructions which fail on non-SMP processors. + Enabling this option allows the kernel to modify itself to make + these instructions safe. Disabling it allows about 1K of space + savings. + + If you don't know what to do here, say Y. + config HAVE_ARM_SCU bool depends on SMP @@ -1256,12 +1289,9 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ - REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ - ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) + depends on SMP default y - select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \ - ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS + select HAVE_ARM_TWD help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -1272,7 +1302,7 @@ source kernel/Kconfig.preempt config HZ int - default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \ + default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 @@ -1478,6 +1508,20 @@ config UACCESS_WITH_MEMCPY However, if the CPU data cache is using a write-allocate mode, this option is unlikely to provide any performance gain. +config SECCOMP + bool + prompt "Enable seccomp to safely compute untrusted bytecode" + ---help--- + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl(PR_SET_SECCOMP), it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" help diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 91344af75f39..2fd0b99afc4b 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -2,6 +2,20 @@ menu "Kernel hacking" source "lib/Kconfig.debug" +config STRICT_DEVMEM + bool "Filter access to /dev/mem" + depends on MMU + ---help--- + If this option is disabled, you allow userspace (root) access to all + of memory, including kernel and userspace memory. Accidental + access to this is obviously disastrous, but specific access can + be used by people debugging the kernel. + + If this option is switched on, the /dev/mem file only allows + userspace access to memory mapped peripherals. + + If in doubt, say Y. + # RMK wants arm kernels compiled with frame pointers or stack unwinding. # If you know what you are doing and are willing to live without stack # traces, you can get a slightly smaller kernel by setting this option to @@ -27,6 +41,11 @@ config ARM_UNWIND the performance is not affected. Currently, this feature only works with EABI compilers. If unsure say Y. +config OLD_MCOUNT + bool + depends on FUNCTION_TRACER && FRAME_POINTER + default y + config DEBUG_USER bool "Verbose user fault messages" help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 59c1ce858fc8..b87aed028eef 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx -machine-$(CONFIG_ARCH_S5P6440) := s5p6440 +machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 @@ -183,6 +183,7 @@ machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SHMOBILE) := shmobile machine-$(CONFIG_ARCH_STMP378X) := stmp378x machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx +machine-$(CONFIG_ARCH_TCC8K) := tcc8k machine-$(CONFIG_ARCH_TEGRA) := tegra machine-$(CONFIG_ARCH_U300) := u300 machine-$(CONFIG_ARCH_U8500) := ux500 @@ -202,6 +203,7 @@ plat-$(CONFIG_ARCH_MXC) := mxc plat-$(CONFIG_ARCH_OMAP) := omap plat-$(CONFIG_ARCH_S3C64XX) := samsung plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx +plat-$(CONFIG_ARCH_TCC_926) := tcc plat-$(CONFIG_PLAT_IOP) := iop plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion @@ -245,13 +247,14 @@ ifeq ($(FASTFPE),$(wildcard $(FASTFPE))) FASTFPE_OBJ :=$(FASTFPE)/ endif -# If we have a machine-specific directory, then include it in the build. -core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ -core-y += $(machdirs) $(platdirs) core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ +# If we have a machine-specific directory, then include it in the build. +core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ +core-y += $(machdirs) $(platdirs) + drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ libs-y := arch/arm/lib/ $(libs-y) diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 7dfa9a85bc0c..ada6359160eb 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -67,25 +67,11 @@ static inline unsigned int gic_irq(unsigned int irq) /* * Routines to acknowledge, disable and enable interrupts - * - * Linux assumes that when we're done with an interrupt we need to - * unmask it, in the same way we need to unmask an interrupt when - * we first enable it. - * - * The GIC has a separate notion of "end of interrupt" to re-enable - * an interrupt after handling, in order to support hardware - * prioritisation. - * - * We can make the GIC behave in the way that Linux expects by making - * our "acknowledge" routine disable the interrupt, then mark it as - * complete. */ static void gic_ack_irq(unsigned int irq) { - u32 mask = 1 << (irq % 32); spin_lock(&irq_controller_lock); - writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4); writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI); spin_unlock(&irq_controller_lock); } diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 5ebbab6242a7..8f0f86db3602 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -146,8 +146,7 @@ #define DESIGNER 0x41 #define REVISION 0x0 #define INTEG_CFG 0x0 -#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12) \ - | (REVISION << 20) | (INTEG_CFG << 24)) +#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12)) #define PCELL_ID_VAL 0xb105f00d @@ -1859,10 +1858,10 @@ int pl330_add(struct pl330_info *pi) regs = pi->base; /* Check if we can handle this DMAC */ - if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL + if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL || get_id(pi, PCELL_ID) != PCELL_ID_VAL) { dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n", - readl(regs + PERIPH_ID), readl(regs + PCELL_ID)); + get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID)); return -EINVAL; } diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 517d50ddbeb3..c0258a8c103b 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -678,7 +678,7 @@ out: * %-EBUSY physical address already marked in-use. * %0 successful. */ -static int +static int __devinit __sa1111_probe(struct device *me, struct resource *mem, int irq) { struct sa1111 *sachip; diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig index f1bac70d6ce9..9e90e6d79297 100644 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ b/arch/arm/configs/at91sam9g20ek_defconfig @@ -13,6 +13,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G20=y CONFIG_MACH_AT91SAM9G20EK=y +CONFIG_MACH_AT91SAM9G20EK_2MMC=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index ccc9c9959b82..2f7042813765 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -15,6 +15,7 @@ CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_ESATA_SHEEVAPLUG=y CONFIG_MACH_GURUPLUG=y +CONFIG_MACH_DOCKSTAR=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y CONFIG_MACH_OPENRD_BASE=y diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig index b2038b0e266f..813cfb366c18 100644 --- a/arch/arm/configs/mx27_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -21,8 +21,14 @@ CONFIG_ARCH_MX2=y CONFIG_MACH_MX27=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y +CONFIG_MACH_CPUIMX27=y +CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y +CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y CONFIG_MACH_MX27_3DS=y +CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_IMX27LITE=y +CONFIG_MACH_PCA100=y +CONFIG_MACH_MXT_TD60=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y @@ -76,7 +82,9 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=m # CONFIG_SERIO is not set +CONFIG_SERIAL_8250=m CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y # CONFIG_LEGACY_PTYS is not set @@ -85,19 +93,20 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y CONFIG_SPI=y -CONFIG_SPI_BITBANG=y +CONFIG_SPI_IMX=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_IMX=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=m +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_ULPI=y CONFIG_MMC=y CONFIG_MMC_MXC=y CONFIG_RTC_CLASS=y diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig deleted file mode 100644 index 2d29329749e4..000000000000 --- a/arch/arm/configs/mx31pdk_defconfig +++ /dev/null @@ -1,44 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_MXC=y -# CONFIG_MACH_MX31ADS is not set -CONFIG_MACH_MX31_3DS=y -CONFIG_AEABI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_LRO is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FIRMWARE_IN_KERNEL is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 161f907b611f..f0c339fd5d21 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -24,6 +24,7 @@ CONFIG_MACH_PCM043=y CONFIG_MACH_ARMADILLO5X0=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_EUKREA_CPUIMX35=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y @@ -108,7 +109,6 @@ CONFIG_MMC=y CONFIG_MMC_MXC=y CONFIG_DMADEVICES=y # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig index a665ecbbe2bc..163cfee7644c 100644 --- a/arch/arm/configs/mx51_defconfig +++ b/arch/arm/configs/mx51_defconfig @@ -15,6 +15,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_ARCH_MXC=y CONFIG_ARCH_MX5=y CONFIG_MACH_MX51_BABBAGE=y +CONFIG_MACH_MX51_3DS=y +CONFIG_MACH_EUKREA_CPUIMX51=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y @@ -69,7 +71,6 @@ CONFIG_REALTEK_PHY=y CONFIG_NATIONAL_PHY=y CONFIG_STE10XP=y CONFIG_LSI_ET1011C_PHY=y -CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y CONFIG_NET_ETHERNET=y @@ -100,7 +101,6 @@ CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_EHCI_HCD=y @@ -117,13 +117,11 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y -CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y -CONFIG_INOTIFY=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set @@ -136,6 +134,7 @@ CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=y +CONFIG_TMPFS=y CONFIG_CONFIGFS_FS=m CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -151,7 +150,6 @@ CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -159,7 +157,6 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_ARM_UNWIND is not set CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -CONFIG_KEYS=y CONFIG_SECURITYFS=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index 9312ef9f9bf4..5ca7a61f7c01 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -39,6 +39,7 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ARM_INTEGRATOR=y +CONFIG_ARM_CHARLCD=y CONFIG_NETDEVICES=y CONFIG_SMSC_PHY=y CONFIG_NET_ETHERNET=y @@ -52,10 +53,13 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_VERSATILE=y +CONFIG_SPI=y +CONFIG_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ARMCLCD=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set @@ -70,7 +74,13 @@ CONFIG_SND_ARMAACI=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y -CONFIG_INOTIFY=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PL031=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y @@ -80,6 +90,7 @@ CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index fb75192ee7e5..fcaa60328051 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -38,6 +38,7 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ARM_INTEGRATOR=y +CONFIG_ARM_CHARLCD=y CONFIG_NETDEVICES=y CONFIG_SMSC_PHY=y CONFIG_NET_ETHERNET=y @@ -51,10 +52,13 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_VERSATILE=y +CONFIG_SPI=y +CONFIG_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ARMCLCD=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set @@ -69,7 +73,13 @@ CONFIG_SND_ARMAACI=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y -CONFIG_INOTIFY=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PL031=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y @@ -79,6 +89,7 @@ CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p64x0_defconfig index 0b0266c6d326..2993ecd35145 100644 --- a/arch/arm/configs/s5p6440_defconfig +++ b/arch/arm/configs/s5p64x0_defconfig @@ -5,10 +5,11 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P6440=y +CONFIG_ARCH_S5P64X0=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDK6440=y +CONFIG_MACH_SMDK6450=y CONFIG_CPU_32v6K=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 46e5e0747269..c1c252cdca60 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -28,26 +28,9 @@ CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y CONFIG_PM=y # CONFIG_SUSPEND is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MISC_DEVICES is not set # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -58,7 +41,6 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y -CONFIG_POWER_SUPPLY=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_REGULATOR=y @@ -66,24 +48,10 @@ CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -CONFIG_SND_SOC=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -CONFIG_MMC_DEBUG=y CONFIG_MMC_ARMMMCI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set CONFIG_RTC_DRV_COH901331=y @@ -93,12 +61,11 @@ CONFIG_COH901318=y CONFIG_FUSE_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -# CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 6e8f05c8a1c8..062b58c029ab 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -154,16 +154,39 @@ .long 9999b,9001f; \ .popsection +#ifdef CONFIG_SMP +#define ALT_SMP(instr...) \ +9998: instr +#define ALT_UP(instr...) \ + .pushsection ".alt.smp.init", "a" ;\ + .long 9998b ;\ + instr ;\ + .popsection +#define ALT_UP_B(label) \ + .equ up_b_offset, label - 9998b ;\ + .pushsection ".alt.smp.init", "a" ;\ + .long 9998b ;\ + b . + up_b_offset ;\ + .popsection +#else +#define ALT_SMP(instr...) +#define ALT_UP(instr...) instr +#define ALT_UP_B(label) b label +#endif + /* * SMP data memory barrier */ .macro smp_dmb #ifdef CONFIG_SMP #if __LINUX_ARM_ARCH__ >= 7 - dmb + ALT_SMP(dmb) #elif __LINUX_ARM_ARCH__ == 6 - mcr p15, 0, r0, c7, c10, 5 @ dmb + ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb +#else +#error Incompatible SMP platform #endif + ALT_UP(nop) #endif .endm diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 4656a24058d2..3acd8fa25e34 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -137,10 +137,10 @@ #endif /* - * This flag is used to indicate that the page pointed to by a pte - * is dirty and requires cleaning before returning it to the user. + * This flag is used to indicate that the page pointed to by a pte is clean + * and does not require cleaning before returning it to the user. */ -#define PG_dcache_dirty PG_arch_1 +#define PG_dcache_clean PG_arch_1 /* * MM Cache Management @@ -156,6 +156,12 @@ * Please note that the implementation of these, and the required * effects are cache-type (VIVT/VIPT/PIPT) specific. * + * flush_icache_all() + * + * Unconditionally clean and invalidate the entire icache. + * Currently only needed for cache-v6.S and cache-v7.S, see + * __flush_icache_all for the generic implementation. + * * flush_kern_all() * * Unconditionally clean and invalidate the entire cache. @@ -206,6 +212,7 @@ */ struct cpu_cache_fns { + void (*flush_icache_all)(void); void (*flush_kern_all)(void); void (*flush_user_all)(void); void (*flush_user_range)(unsigned long, unsigned long, unsigned int); @@ -227,6 +234,7 @@ struct cpu_cache_fns { extern struct cpu_cache_fns cpu_cache; +#define __cpuc_flush_icache_all cpu_cache.flush_icache_all #define __cpuc_flush_kern_all cpu_cache.flush_kern_all #define __cpuc_flush_user_all cpu_cache.flush_user_all #define __cpuc_flush_user_range cpu_cache.flush_user_range @@ -246,6 +254,7 @@ extern struct cpu_cache_fns cpu_cache; #else +#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all) #define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) #define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all) #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) @@ -253,6 +262,7 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) #define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) +extern void __cpuc_flush_icache_all(void); extern void __cpuc_flush_kern_all(void); extern void __cpuc_flush_user_all(void); extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); @@ -291,6 +301,37 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *, /* * Convert calls to our calling convention. */ + +/* Invalidate I-cache */ +#define __flush_icache_all_generic() \ + asm("mcr p15, 0, %0, c7, c5, 0" \ + : : "r" (0)); + +/* Invalidate I-cache inner shareable */ +#define __flush_icache_all_v7_smp() \ + asm("mcr p15, 0, %0, c7, c1, 0" \ + : : "r" (0)); + +/* + * Optimized __flush_icache_all for the common cases. Note that UP ARMv7 + * will fall through to use __flush_icache_all_generic. + */ +#if (defined(CONFIG_CPU_V7) && defined(CONFIG_CPU_V6)) || \ + defined(CONFIG_SMP_ON_UP) +#define __flush_icache_preferred __cpuc_flush_icache_all +#elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP) +#define __flush_icache_preferred __flush_icache_all_v7_smp +#elif __LINUX_ARM_ARCH__ == 6 && defined(CONFIG_ARM_ERRATA_411920) +#define __flush_icache_preferred __cpuc_flush_icache_all +#else +#define __flush_icache_preferred __flush_icache_all_generic +#endif + +static inline void __flush_icache_all(void) +{ + __flush_icache_preferred(); +} + #define flush_cache_all() __cpuc_flush_kern_all() static inline void vivt_flush_cache_mm(struct mm_struct *mm) @@ -366,21 +407,6 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 extern void flush_dcache_page(struct page *); -static inline void __flush_icache_all(void) -{ -#ifdef CONFIG_ARM_ERRATA_411920 - extern void v6_icache_inval_all(void); - v6_icache_inval_all(); -#elif defined(CONFIG_SMP) && __LINUX_ARM_ARCH__ >= 7 - asm("mcr p15, 0, %0, c7, c1, 0 @ invalidate I-cache inner shareable\n" - : - : "r" (0)); -#else - asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" - : - : "r" (0)); -#endif -} static inline void flush_kernel_vmap_range(void *addr, int size) { if ((cache_is_vivt() || cache_is_vipt_aliasing())) @@ -405,9 +431,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma, #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE static inline void flush_kernel_dcache_page(struct page *page) { - /* highmem pages are always flushed upon kunmap already */ - if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page)) - __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } #define flush_dcache_mmap_lock(mapping) \ diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h index d3a4c2cb9f2f..c023db09fcc1 100644 --- a/arch/arm/include/asm/cachetype.h +++ b/arch/arm/include/asm/cachetype.h @@ -6,6 +6,7 @@ #define CACHEID_VIPT_ALIASING (1 << 2) #define CACHEID_VIPT (CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING) #define CACHEID_ASID_TAGGED (1 << 3) +#define CACHEID_VIPT_I_ALIASING (1 << 4) extern unsigned int cacheid; @@ -14,15 +15,18 @@ extern unsigned int cacheid; #define cache_is_vipt_nonaliasing() cacheid_is(CACHEID_VIPT_NONALIASING) #define cache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_ALIASING) #define icache_is_vivt_asid_tagged() cacheid_is(CACHEID_ASID_TAGGED) +#define icache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_I_ALIASING) /* * __LINUX_ARM_ARCH__ is the minimum supported CPU architecture * Mask out support which will never be present on newer CPUs. * - v6+ is never VIVT - * - v7+ VIPT never aliases + * - v7+ VIPT never aliases on D-side */ #if __LINUX_ARM_ARCH__ >= 7 -#define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING | CACHEID_ASID_TAGGED) +#define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING |\ + CACHEID_ASID_TAGGED |\ + CACHEID_VIPT_I_ALIASING) #elif __LINUX_ARM_ARCH__ >= 6 #define __CACHEID_ARCH_MIN (~CACHEID_VIVT) #else diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 5747a8baa413..8bb66bca2e3e 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -127,4 +127,8 @@ struct mm_struct; extern unsigned long arch_randomize_brk(struct mm_struct *mm); #define arch_randomize_brk arch_randomize_brk +extern int vectors_user_mapping(void); +#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping() +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES + #endif diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 103f7ee97313..f89515adac60 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -2,12 +2,30 @@ #define _ASM_ARM_FTRACE #ifdef CONFIG_FUNCTION_TRACER -#define MCOUNT_ADDR ((long)(mcount)) +#define MCOUNT_ADDR ((unsigned long)(__gnu_mcount_nc)) #define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ #ifndef __ASSEMBLY__ extern void mcount(void); extern void __gnu_mcount_nc(void); + +#ifdef CONFIG_DYNAMIC_FTRACE +struct dyn_arch_ftrace { +#ifdef CONFIG_OLD_MCOUNT + bool old_mcount; +#endif +}; + +static inline unsigned long ftrace_call_adjust(unsigned long addr) +{ + /* With Thumb-2, the recorded addresses have the lsb set */ + return addr & ~1; +} + +extern void ftrace_caller_old(void); +extern void ftrace_call_old(void); +#endif + #endif #endif diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h index 212e47828c79..7ecd793b8f5a 100644 --- a/arch/arm/include/asm/hardware/coresight.h +++ b/arch/arm/include/asm/hardware/coresight.h @@ -21,18 +21,6 @@ #define TRACER_RUNNING BIT(TRACER_RUNNING_BIT) #define TRACER_CYCLE_ACC BIT(TRACER_CYCLE_ACC_BIT) -struct tracectx { - unsigned int etb_bufsz; - void __iomem *etb_regs; - void __iomem *etm_regs; - unsigned long flags; - int ncmppairs; - int etm_portsz; - struct device *dev; - struct clk *emu_clk; - struct mutex mutex; -}; - #define TRACER_TIMEOUT 10000 #define etm_writel(t, v, x) \ @@ -112,10 +100,10 @@ struct tracectx { /* ETM status register, "ETM Architecture", 3.3.2 */ #define ETMR_STATUS (0x10) -#define ETMST_OVERFLOW (1 << 0) -#define ETMST_PROGBIT (1 << 1) -#define ETMST_STARTSTOP (1 << 2) -#define ETMST_TRIGGER (1 << 3) +#define ETMST_OVERFLOW BIT(0) +#define ETMST_PROGBIT BIT(1) +#define ETMST_STARTSTOP BIT(2) +#define ETMST_TRIGGER BIT(3) #define etm_progbit(t) (etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT) #define etm_started(t) (etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP) @@ -123,7 +111,7 @@ struct tracectx { #define ETMR_TRACEENCTRL2 0x1c #define ETMR_TRACEENCTRL 0x24 -#define ETMTE_INCLEXCL (1 << 24) +#define ETMTE_INCLEXCL BIT(24) #define ETMR_TRACEENEVT 0x20 #define ETMCTRL_OPTS (ETMCTRL_DO_CPRT | \ ETMCTRL_DATA_DO_ADDR | \ @@ -146,12 +134,12 @@ struct tracectx { #define ETBR_CTRL 0x20 #define ETBR_FORMATTERCTRL 0x304 #define ETBFF_ENFTC 1 -#define ETBFF_ENFCONT (1 << 1) -#define ETBFF_FONFLIN (1 << 4) -#define ETBFF_MANUAL_FLUSH (1 << 6) -#define ETBFF_TRIGIN (1 << 8) -#define ETBFF_TRIGEVT (1 << 9) -#define ETBFF_TRIGFL (1 << 10) +#define ETBFF_ENFCONT BIT(1) +#define ETBFF_FONFLIN BIT(4) +#define ETBFF_MANUAL_FLUSH BIT(6) +#define ETBFF_TRIGIN BIT(8) +#define ETBFF_TRIGEVT BIT(9) +#define ETBFF_TRIGFL BIT(10) #define etb_writel(t, v, x) \ (__raw_writel((v), (t)->etb_regs + (x))) diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h new file mode 100644 index 000000000000..4d8ae9d67abe --- /dev/null +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -0,0 +1,133 @@ +#ifndef _ARM_HW_BREAKPOINT_H +#define _ARM_HW_BREAKPOINT_H + +#ifdef __KERNEL__ + +struct task_struct; + +#ifdef CONFIG_HAVE_HW_BREAKPOINT + +struct arch_hw_breakpoint_ctrl { + u32 __reserved : 9, + mismatch : 1, + : 9, + len : 8, + type : 2, + privilege : 2, + enabled : 1; +}; + +struct arch_hw_breakpoint { + u32 address; + u32 trigger; + struct perf_event *suspended_wp; + struct arch_hw_breakpoint_ctrl ctrl; +}; + +static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl) +{ + return (ctrl.mismatch << 22) | (ctrl.len << 5) | (ctrl.type << 3) | + (ctrl.privilege << 1) | ctrl.enabled; +} + +static inline void decode_ctrl_reg(u32 reg, + struct arch_hw_breakpoint_ctrl *ctrl) +{ + ctrl->enabled = reg & 0x1; + reg >>= 1; + ctrl->privilege = reg & 0x3; + reg >>= 2; + ctrl->type = reg & 0x3; + reg >>= 2; + ctrl->len = reg & 0xff; + reg >>= 17; + ctrl->mismatch = reg & 0x1; +} + +/* Debug architecture numbers. */ +#define ARM_DEBUG_ARCH_RESERVED 0 /* In case of ptrace ABI updates. */ +#define ARM_DEBUG_ARCH_V6 1 +#define ARM_DEBUG_ARCH_V6_1 2 +#define ARM_DEBUG_ARCH_V7_ECP14 3 +#define ARM_DEBUG_ARCH_V7_MM 4 + +/* Breakpoint */ +#define ARM_BREAKPOINT_EXECUTE 0 + +/* Watchpoints */ +#define ARM_BREAKPOINT_LOAD 1 +#define ARM_BREAKPOINT_STORE 2 + +/* Privilege Levels */ +#define ARM_BREAKPOINT_PRIV 1 +#define ARM_BREAKPOINT_USER 2 + +/* Lengths */ +#define ARM_BREAKPOINT_LEN_1 0x1 +#define ARM_BREAKPOINT_LEN_2 0x3 +#define ARM_BREAKPOINT_LEN_4 0xf +#define ARM_BREAKPOINT_LEN_8 0xff + +/* Limits */ +#define ARM_MAX_BRP 16 +#define ARM_MAX_WRP 16 +#define ARM_MAX_HBP_SLOTS (ARM_MAX_BRP + ARM_MAX_WRP) + +/* DSCR method of entry bits. */ +#define ARM_DSCR_MOE(x) ((x >> 2) & 0xf) +#define ARM_ENTRY_BREAKPOINT 0x1 +#define ARM_ENTRY_ASYNC_WATCHPOINT 0x2 +#define ARM_ENTRY_SYNC_WATCHPOINT 0xa + +/* DSCR monitor/halting bits. */ +#define ARM_DSCR_HDBGEN (1 << 14) +#define ARM_DSCR_MDBGEN (1 << 15) + +/* opcode2 numbers for the co-processor instructions. */ +#define ARM_OP2_BVR 4 +#define ARM_OP2_BCR 5 +#define ARM_OP2_WVR 6 +#define ARM_OP2_WCR 7 + +/* Base register numbers for the debug registers. */ +#define ARM_BASE_BVR 64 +#define ARM_BASE_BCR 80 +#define ARM_BASE_WVR 96 +#define ARM_BASE_WCR 112 + +/* Accessor macros for the debug registers. */ +#define ARM_DBG_READ(M, OP2, VAL) do {\ + asm volatile("mrc p14, 0, %0, c0," #M ", " #OP2 : "=r" (VAL));\ +} while (0) + +#define ARM_DBG_WRITE(M, OP2, VAL) do {\ + asm volatile("mcr p14, 0, %0, c0," #M ", " #OP2 : : "r" (VAL));\ +} while (0) + +struct notifier_block; +struct perf_event; +struct pmu; + +extern struct pmu perf_ops_bp; +extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl, + int *gen_len, int *gen_type); +extern int arch_check_bp_in_kernelspace(struct perf_event *bp); +extern int arch_validate_hwbkpt_settings(struct perf_event *bp); +extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused, + unsigned long val, void *data); + +extern u8 arch_get_debug_arch(void); +extern u8 arch_get_max_wp_len(void); +extern void clear_ptrace_hw_breakpoint(struct task_struct *tsk); + +int arch_install_hw_breakpoint(struct perf_event *bp); +void arch_uninstall_hw_breakpoint(struct perf_event *bp); +void hw_breakpoint_pmu_read(struct perf_event *bp); +int hw_breakpoint_slots(int type); + +#else +static inline void clear_ptrace_hw_breakpoint(struct task_struct *tsk) {} + +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ +#endif /* __KERNEL__ */ +#endif /* _ARM_HW_BREAKPOINT_H */ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 1261b1f928d9..815efa2d4e07 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -294,6 +294,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); #define ARCH_HAS_VALID_PHYS_ADDR_RANGE extern int valid_phys_addr_range(unsigned long addr, size_t size); extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); +extern int devmem_is_allowed(unsigned long pfn); #endif /* diff --git a/arch/arm/include/asm/irqflags.h b/arch/arm/include/asm/irqflags.h index 6d09974e6646..1e6cca55c750 100644 --- a/arch/arm/include/asm/irqflags.h +++ b/arch/arm/include/asm/irqflags.h @@ -10,66 +10,85 @@ */ #if __LINUX_ARM_ARCH__ >= 6 -#define raw_local_irq_save(x) \ - ({ \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_save\n" \ - "cpsid i" \ - : "=r" (x) : : "memory", "cc"); \ - }) +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + + asm volatile( + " mrs %0, cpsr @ arch_local_irq_save\n" + " cpsid i" + : "=r" (flags) : : "memory", "cc"); + return flags; +} + +static inline void arch_local_irq_enable(void) +{ + asm volatile( + " cpsie i @ arch_local_irq_enable" + : + : + : "memory", "cc"); +} + +static inline void arch_local_irq_disable(void) +{ + asm volatile( + " cpsid i @ arch_local_irq_disable" + : + : + : "memory", "cc"); +} -#define raw_local_irq_enable() __asm__("cpsie i @ __sti" : : : "memory", "cc") -#define raw_local_irq_disable() __asm__("cpsid i @ __cli" : : : "memory", "cc") #define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc") #define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc") - #else /* * Save the current interrupt enable state & disable IRQs */ -#define raw_local_irq_save(x) \ - ({ \ - unsigned long temp; \ - (void) (&temp == &x); \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_save\n" \ -" orr %1, %0, #128\n" \ -" msr cpsr_c, %1" \ - : "=r" (x), "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags, temp; + + asm volatile( + " mrs %0, cpsr @ arch_local_irq_save\n" + " orr %1, %0, #128\n" + " msr cpsr_c, %1" + : "=r" (flags), "=r" (temp) + : + : "memory", "cc"); + return flags; +} + /* * Enable IRQs */ -#define raw_local_irq_enable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_enable\n" \ -" bic %0, %0, #128\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) +static inline void arch_local_irq_enable(void) +{ + unsigned long temp; + asm volatile( + " mrs %0, cpsr @ arch_local_irq_enable\n" + " bic %0, %0, #128\n" + " msr cpsr_c, %0" + : "=r" (temp) + : + : "memory", "cc"); +} /* * Disable IRQs */ -#define raw_local_irq_disable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_disable\n" \ -" orr %0, %0, #128\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) +static inline void arch_local_irq_disable(void) +{ + unsigned long temp; + asm volatile( + " mrs %0, cpsr @ arch_local_irq_disable\n" + " orr %0, %0, #128\n" + " msr cpsr_c, %0" + : "=r" (temp) + : + : "memory", "cc"); +} /* * Enable FIQs @@ -106,27 +125,31 @@ /* * Save the current interrupt enable state. */ -#define raw_local_save_flags(x) \ - ({ \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_save_flags" \ - : "=r" (x) : : "memory", "cc"); \ - }) +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + asm volatile( + " mrs %0, cpsr @ local_save_flags" + : "=r" (flags) : : "memory", "cc"); + return flags; +} /* * restore saved IRQ & FIQ state */ -#define raw_local_irq_restore(x) \ - __asm__ __volatile__( \ - "msr cpsr_c, %0 @ local_irq_restore\n" \ - : \ - : "r" (x) \ - : "memory", "cc") +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile( + " msr cpsr_c, %0 @ local_irq_restore" + : + : "r" (flags) + : "memory", "cc"); +} -#define raw_irqs_disabled_flags(flags) \ -({ \ - (int)((flags) & PSR_I_BIT); \ -}) +static inline int arch_irqs_disabled_flags(unsigned long flags) +{ + return flags & PSR_I_BIT; +} #endif #endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 8a0dd18ba642..d97a964207fa 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -16,18 +16,15 @@ struct sys_timer; struct machine_desc { /* - * Note! The first four elements are used + * Note! The first two elements are used * by assembler code in head.S, head-common.S */ unsigned int nr; /* architecture number */ - unsigned int nr_irqs; /* number of IRQs */ - unsigned int phys_io; /* start of physical io */ - unsigned int io_pg_offst; /* byte offset for io - * page tabe entry */ - const char *name; /* architecture name */ unsigned long boot_params; /* tagged list */ + unsigned int nr_irqs; /* number of IRQs */ + unsigned int video_start; /* start of video RAM */ unsigned int video_end; /* end of video RAM */ diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index a0b3cac0547c..71605d9f8e42 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -18,7 +18,6 @@ #include <asm/cacheflush.h> #include <asm/cachetype.h> #include <asm/proc-fns.h> -#include <asm-generic/mm_hooks.h> void __check_kvm_seq(struct mm_struct *mm); @@ -134,4 +133,32 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, #define deactivate_mm(tsk,mm) do { } while (0) #define activate_mm(prev,next) switch_mm(prev, next, NULL) +/* + * We are inserting a "fake" vma for the user-accessible vector page so + * gdb and friends can get to it through ptrace and /proc/<pid>/mem. + * But we also want to remove it before the generic code gets to see it + * during process exit or the unmapping of it would cause total havoc. + * (the macro is used as remove_vma() is static to mm/mmap.c) + */ +#define arch_exit_mmap(mm) \ +do { \ + struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \ + if (high_vma) { \ + BUG_ON(high_vma->vm_next); /* it should be last */ \ + if (high_vma->vm_prev) \ + high_vma->vm_prev->vm_next = NULL; \ + else \ + mm->mmap = NULL; \ + rb_erase(&high_vma->vm_rb, &mm->mm_rb); \ + mm->mmap_cache = NULL; \ + mm->map_count--; \ + remove_vma(high_vma); \ + } \ +} while (0) + +static inline void arch_dup_mmap(struct mm_struct *oldmm, + struct mm_struct *mm) +{ +} + #endif diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index e4dfa69abb68..cbb0bc295d2b 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -7,20 +7,27 @@ struct unwind_table; -struct mod_arch_specific -{ #ifdef CONFIG_ARM_UNWIND - Elf_Shdr *unw_sec_init; - Elf_Shdr *unw_sec_devinit; - Elf_Shdr *unw_sec_core; - Elf_Shdr *sec_init_text; - Elf_Shdr *sec_devinit_text; - Elf_Shdr *sec_core_text; - struct unwind_table *unwind_init; - struct unwind_table *unwind_devinit; - struct unwind_table *unwind_core; -#endif +struct arm_unwind_mapping { + Elf_Shdr *unw_sec; + Elf_Shdr *sec_text; + struct unwind_table *unwind; +}; +enum { + ARM_SEC_INIT, + ARM_SEC_DEVINIT, + ARM_SEC_CORE, + ARM_SEC_EXIT, + ARM_SEC_DEVEXIT, + ARM_SEC_MAX, +}; +struct mod_arch_specific { + struct arm_unwind_mapping map[ARM_SEC_MAX]; }; +#else +struct mod_arch_specific { +}; +#endif /* * Include the ARM architecture version. diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index e90b167ea848..a9672e8406a3 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -278,9 +278,24 @@ extern struct page *empty_zero_page; #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) -#define set_pte_at(mm,addr,ptep,pteval) do { \ - set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \ - } while (0) +#if __LINUX_ARM_ARCH__ < 6 +static inline void __sync_icache_dcache(pte_t pteval) +{ +} +#else +extern void __sync_icache_dcache(pte_t pteval); +#endif + +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval) +{ + if (addr >= TASK_SIZE) + set_pte_ext(ptep, pteval, 0); + else { + __sync_icache_dcache(pteval); + set_pte_ext(ptep, pteval, PTE_EXT_NG); + } +} /* * The following only work if pte_present() is true. @@ -290,8 +305,13 @@ extern struct page *empty_zero_page; #define pte_write(pte) (pte_val(pte) & L_PTE_WRITE) #define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) #define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (pte_val(pte) & L_PTE_EXEC) #define pte_special(pte) (0) +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 7bed3daf83b8..67357baaeeeb 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -19,6 +19,7 @@ #ifdef __KERNEL__ +#include <asm/hw_breakpoint.h> #include <asm/ptrace.h> #include <asm/types.h> @@ -41,6 +42,9 @@ struct debug_entry { struct debug_info { int nsaved; struct debug_entry bp[2]; +#ifdef CONFIG_HAVE_HW_BREAKPOINT + struct perf_event *hbp[ARM_MAX_HBP_SLOTS]; +#endif }; struct thread_struct { diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 7ce15eb15f72..783d50f32618 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -29,6 +29,8 @@ #define PTRACE_SETCRUNCHREGS 26 #define PTRACE_GETVFPREGS 27 #define PTRACE_SETVFPREGS 28 +#define PTRACE_GETHBPREGS 29 +#define PTRACE_SETHBPREGS 30 /* * PSR bits diff --git a/arch/arm/include/asm/seccomp.h b/arch/arm/include/asm/seccomp.h new file mode 100644 index 000000000000..52b156b341f5 --- /dev/null +++ b/arch/arm/include/asm/seccomp.h @@ -0,0 +1,11 @@ +#ifndef _ASM_ARM_SECCOMP_H +#define _ASM_ARM_SECCOMP_H + +#include <linux/unistd.h> + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_rt_sigreturn + +#endif /* _ASM_ARM_SECCOMP_H */ diff --git a/arch/arm/include/asm/smp_mpidr.h b/arch/arm/include/asm/smp_mpidr.h new file mode 100644 index 000000000000..6a9307d64900 --- /dev/null +++ b/arch/arm/include/asm/smp_mpidr.h @@ -0,0 +1,17 @@ +#ifndef ASMARM_SMP_MIDR_H +#define ASMARM_SMP_MIDR_H + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("\n" \ + "1: mrc p15, 0, %0, c0, c0, 5\n" \ + " .pushsection \".alt.smp.init\", \"a\"\n"\ + " .long 1b\n" \ + " mov %0, #0\n" \ + " .popsection" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +#endif diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index e6215305544a..f24c1b9e211d 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -7,15 +7,40 @@ #include <asm/cputype.h> +/* + * Return true if we are running on a SMP platform + */ +static inline bool is_smp(void) +{ +#ifndef CONFIG_SMP + return false; +#elif defined(CONFIG_SMP_ON_UP) + extern unsigned int smp_on_up; + return !!smp_on_up; +#else + return true; +#endif +} + /* all SMP configurations have the extended CPUID registers */ static inline int tlb_ops_need_broadcast(void) { + if (!is_smp()) + return 0; + return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2; } +#if !defined(CONFIG_SMP) || __LINUX_ARM_ARCH__ >= 7 +#define cache_ops_need_broadcast() 0 +#else static inline int cache_ops_need_broadcast(void) { + if (!is_smp()) + return 0; + return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1; } +#endif #endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 8ba1ccf82a02..1120f18a6b17 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -85,6 +85,10 @@ void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), int sig, int code, const char *name); +void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, + struct pt_regs *), + int sig, int code, const char *name); + #define xchg(ptr,x) \ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) @@ -325,6 +329,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size extern void disable_hlt(void); extern void enable_hlt(void); +void cpu_idle_wait(void); + #include <asm-generic/cmpxchg-local.h> #if __LINUX_ARM_ARCH__ < 6 diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 763e29fa8530..7b5cc8dae06e 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -144,6 +144,7 @@ extern void vfp_flush_hwstate(struct thread_info *); #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_FREEZE 19 #define TIF_RESTORE_SIGMASK 20 +#define TIF_SECCOMP 21 #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) @@ -153,6 +154,7 @@ extern void vfp_flush_hwstate(struct thread_info *); #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 33b546ae72d4..ce7378ea15a2 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -70,6 +70,10 @@ #undef _TLB #undef MULTI_TLB +#ifdef CONFIG_SMP_ON_UP +#define MULTI_TLB 1 +#endif + #define v3_tlb_flags (TLB_V3_FULL | TLB_V3_PAGE) #ifdef CONFIG_CPU_TLB_V3 @@ -185,17 +189,23 @@ # define v6wbi_always_flags (-1UL) #endif -#ifdef CONFIG_SMP -#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \ +#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \ TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID) -#else -#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ +#define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BTB | \ TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID) -#endif #ifdef CONFIG_CPU_TLB_V7 -# define v7wbi_possible_flags v7wbi_tlb_flags -# define v7wbi_always_flags v7wbi_tlb_flags + +# ifdef CONFIG_SMP_ON_UP +# define v7wbi_possible_flags (v7wbi_tlb_flags_smp | v7wbi_tlb_flags_up) +# define v7wbi_always_flags (v7wbi_tlb_flags_smp & v7wbi_tlb_flags_up) +# elif defined(CONFIG_SMP) +# define v7wbi_possible_flags v7wbi_tlb_flags_smp +# define v7wbi_always_flags v7wbi_tlb_flags_smp +# else +# define v7wbi_possible_flags v7wbi_tlb_flags_up +# define v7wbi_always_flags v7wbi_tlb_flags_up +# endif # ifdef _TLB # define MULTI_TLB 1 # else @@ -560,12 +570,20 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); #endif /* - * if PG_dcache_dirty is set for the page, we need to ensure that any + * If PG_dcache_clean is not set for the page, we need to ensure that any * cache entries for the kernels virtual memory range are written - * back to the page. + * back to the page. On ARMv6 and later, the cache coherency is handled via + * the set_pte_at() function. */ +#if __LINUX_ARM_ARCH__ < 6 extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep); +#else +static inline void update_mmu_cache(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} +#endif #endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 980b78e31328..5b9b268f4fbb 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARM_UNWIND) += unwind.o obj-$(CONFIG_HAVE_TCM) += tcm.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 8214bfebfaca..e5e1e5387678 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -165,6 +165,8 @@ EXPORT_SYMBOL(_find_next_bit_be); #endif #ifdef CONFIG_FUNCTION_TRACER +#ifdef CONFIG_OLD_MCOUNT EXPORT_SYMBOL(mcount); +#endif EXPORT_SYMBOL(__gnu_mcount_nc); #endif diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 85f2a019f77b..82da66172132 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -102,8 +102,6 @@ int main(void) DEFINE(SIZEOF_MACHINE_DESC, sizeof(struct machine_desc)); DEFINE(MACHINFO_TYPE, offsetof(struct machine_desc, nr)); DEFINE(MACHINFO_NAME, offsetof(struct machine_desc, name)); - DEFINE(MACHINFO_PHYSIO, offsetof(struct machine_desc, phys_io)); - DEFINE(MACHINFO_PGOFFIO, offsetof(struct machine_desc, io_pg_offst)); BLANK(); DEFINE(PROC_INFO_SZ, sizeof(struct proc_info_list)); DEFINE(PROCINFO_INITFUNC, offsetof(struct proc_info_list, __cpu_flush)); diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index a38b4879441d..a0f07521ca8a 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -22,11 +22,11 @@ #if defined(CONFIG_DEBUG_ICEDCC) @@ debug using ARM EmbeddedICE DCC channel -#if defined(CONFIG_CPU_V6) - - .macro addruart, rx, tmp + .macro addruart, rp, rv .endm +#if defined(CONFIG_CPU_V6) + .macro senduart, rd, rx mcr p14, 0, \rd, c0, c5, 0 .endm @@ -51,9 +51,6 @@ #elif defined(CONFIG_CPU_V7) - .macro addruart, rx, tmp - .endm - .macro senduart, rd, rx mcr p14, 0, \rd, c0, c5, 0 .endm @@ -71,9 +68,6 @@ wait: mrc p14, 0, pc, c0, c1, 0 #elif defined(CONFIG_CPU_XSCALE) - .macro addruart, rx, tmp - .endm - .macro senduart, rd, rx mcr p14, 0, \rd, c8, c0, 0 .endm @@ -98,9 +92,6 @@ wait: mrc p14, 0, pc, c0, c1, 0 #else - .macro addruart, rx, tmp - .endm - .macro senduart, rd, rx mcr p14, 0, \rd, c1, c0, 0 .endm @@ -130,6 +121,22 @@ wait: mrc p14, 0, pc, c0, c1, 0 #include <mach/debug-macro.S> #endif /* CONFIG_DEBUG_ICEDCC */ +#ifdef CONFIG_MMU + .macro addruart_current, rx, tmp1, tmp2 + addruart \tmp1, \tmp2 + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + moveq \rx, \tmp1 + movne \rx, \tmp2 + .endm + +#else /* !CONFIG_MMU */ + .macro addruart_current, rx, tmp1, tmp2 + addruart \rx, \tmp1 + .endm + +#endif /* CONFIG_MMU */ + /* * Useful debugging routines */ @@ -164,7 +171,7 @@ ENDPROC(printhex2) .ltorg ENTRY(printascii) - addruart r3, r1 + addruart_current r3, r1, r2 b 2f 1: waituart r2, r3 senduart r1, r3 @@ -180,7 +187,7 @@ ENTRY(printascii) ENDPROC(printascii) ENTRY(printch) - addruart r3, r1 + addruart_current r3, r1, r2 mov r1, r0 mov r0, #0 b 1b diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index bb8e93a76407..c09e3573c5de 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -46,7 +46,8 @@ * this macro assumes that irqstat (r6) and base (r5) are * preserved from get_irqnr_and_base above */ - test_for_ipi r0, r6, r5, lr + ALT_SMP(test_for_ipi r0, r6, r5, lr) + ALT_UP_B(9997f) movne r0, sp adrne lr, BSYM(1b) bne do_IPI @@ -57,6 +58,7 @@ adrne lr, BSYM(1b) bne do_local_timer #endif +9997: #endif .endm @@ -965,11 +967,8 @@ kuser_cmpxchg_fixup: beq 1b rsbs r0, r3, #0 /* beware -- each __kuser slot must be 8 instructions max */ -#ifdef CONFIG_SMP - b __kuser_memory_barrier -#else - usr_ret lr -#endif + ALT_SMP(b __kuser_memory_barrier) + ALT_UP(usr_ret lr) #endif diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 7885722bdf4e..8bfa98757cd2 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -129,30 +129,58 @@ ENDPROC(ret_from_fork) * clobber the ip register. This is OK because the ARM calling convention * allows it to be clobbered in subroutines and doesn't use it to hold * parameters.) + * + * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0" + * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see + * arch/arm/kernel/ftrace.c). */ + +#ifndef CONFIG_OLD_MCOUNT +#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4)) +#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0. +#endif +#endif + #ifdef CONFIG_DYNAMIC_FTRACE -ENTRY(mcount) +ENTRY(__gnu_mcount_nc) + mov ip, lr + ldmia sp!, {lr} + mov pc, ip +ENDPROC(__gnu_mcount_nc) + +ENTRY(ftrace_caller) stmdb sp!, {r0-r3, lr} mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE + ldr r1, [sp, #20] - .globl mcount_call -mcount_call: + .global ftrace_call +ftrace_call: bl ftrace_stub - ldr lr, [fp, #-4] @ restore lr - ldmia sp!, {r0-r3, pc} + ldmia sp!, {r0-r3, ip, lr} + mov pc, ip +ENDPROC(ftrace_caller) -ENTRY(ftrace_caller) +#ifdef CONFIG_OLD_MCOUNT +ENTRY(mcount) + stmdb sp!, {lr} + ldr lr, [fp, #-4] + ldmia sp!, {pc} +ENDPROC(mcount) + +ENTRY(ftrace_caller_old) stmdb sp!, {r0-r3, lr} ldr r1, [fp, #-4] mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE - .globl ftrace_call -ftrace_call: + .globl ftrace_call_old +ftrace_call_old: bl ftrace_stub ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} +ENDPROC(ftrace_caller_old) +#endif #else @@ -160,7 +188,7 @@ ENTRY(__gnu_mcount_nc) stmdb sp!, {r0-r3, lr} ldr r0, =ftrace_trace_function ldr r2, [r0] - adr r0, ftrace_stub + adr r0, .Lftrace_stub cmp r0, r2 bne gnu_trace ldmia sp!, {r0-r3, ip, lr} @@ -170,11 +198,19 @@ gnu_trace: ldr r1, [sp, #20] @ lr of instrumented routine mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE - mov lr, pc + adr lr, BSYM(1f) mov pc, r2 +1: ldmia sp!, {r0-r3, ip, lr} mov pc, ip +ENDPROC(__gnu_mcount_nc) +#ifdef CONFIG_OLD_MCOUNT +/* + * This is under an ifdef in order to force link-time errors for people trying + * to build with !FRAME_POINTER with a GCC which doesn't use the new-style + * mcount. + */ ENTRY(mcount) stmdb sp!, {r0-r3, lr} ldr r0, =ftrace_trace_function @@ -193,12 +229,15 @@ trace: mov pc, r2 ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} +ENDPROC(mcount) +#endif #endif /* CONFIG_DYNAMIC_FTRACE */ - .globl ftrace_stub -ftrace_stub: +ENTRY(ftrace_stub) +.Lftrace_stub: mov pc, lr +ENDPROC(ftrace_stub) #endif /* CONFIG_FUNCTION_TRACER */ @@ -295,7 +334,6 @@ ENTRY(vector_swi) get_thread_info tsk adr tbl, sys_call_table @ load syscall table pointer - ldr ip, [tsk, #TI_FLAGS] @ check for syscall tracing #if defined(CONFIG_OABI_COMPAT) /* @@ -312,8 +350,20 @@ ENTRY(vector_swi) eor scno, scno, #__NR_SYSCALL_BASE @ check OS number #endif + ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing stmdb sp!, {r4, r5} @ push fifth and sixth args - tst ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls? + +#ifdef CONFIG_SECCOMP + tst r10, #_TIF_SECCOMP + beq 1f + mov r0, scno + bl __secure_computing + add r0, sp, #S_R0 + S_OFF @ pointer to regs + ldmia r0, {r0 - r3} @ have to reload r0 - r3 +1: +#endif + + tst r10, #_TIF_SYSCALL_TRACE @ are we tracing syscalls? bne __sys_trace cmp scno, #NR_syscalls @ check upper syscall limit diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c index 33c7077174db..a48d51257988 100644 --- a/arch/arm/kernel/etm.c +++ b/arch/arm/kernel/etm.c @@ -30,6 +30,21 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Shishkin"); +/* + * ETM tracer state + */ +struct tracectx { + unsigned int etb_bufsz; + void __iomem *etb_regs; + void __iomem *etm_regs; + unsigned long flags; + int ncmppairs; + int etm_portsz; + struct device *dev; + struct clk *emu_clk; + struct mutex mutex; +}; + static struct tracectx tracer; static inline bool trace_isrunning(struct tracectx *t) diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index 0298286ad4ad..971ac8c36ea7 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -2,102 +2,194 @@ * Dynamic function tracing support. * * Copyright (C) 2008 Abhishek Sagar <sagar.abhishek@gmail.com> + * Copyright (C) 2010 Rabin Vincent <rabin@rab.in> * * For licencing details, see COPYING. * * Defines low-level handling of mcount calls when the kernel * is compiled with the -pg flag. When using dynamic ftrace, the - * mcount call-sites get patched lazily with NOP till they are - * enabled. All code mutation routines here take effect atomically. + * mcount call-sites get patched with NOP till they are enabled. + * All code mutation routines here are called under stop_machine(). */ #include <linux/ftrace.h> +#include <linux/uaccess.h> #include <asm/cacheflush.h> #include <asm/ftrace.h> -#define PC_OFFSET 8 -#define BL_OPCODE 0xeb000000 -#define BL_OFFSET_MASK 0x00ffffff +#ifdef CONFIG_THUMB2_KERNEL +#define NOP 0xeb04f85d /* pop.w {lr} */ +#else +#define NOP 0xe8bd4000 /* pop {lr} */ +#endif -static unsigned long bl_insn; -static const unsigned long NOP = 0xe1a00000; /* mov r0, r0 */ +#ifdef CONFIG_OLD_MCOUNT +#define OLD_MCOUNT_ADDR ((unsigned long) mcount) +#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old) -unsigned char *ftrace_nop_replace(void) +#define OLD_NOP 0xe1a00000 /* mov r0, r0 */ + +static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) { - return (char *)&NOP; + return rec->arch.old_mcount ? OLD_NOP : NOP; } +static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) +{ + if (!rec->arch.old_mcount) + return addr; + + if (addr == MCOUNT_ADDR) + addr = OLD_MCOUNT_ADDR; + else if (addr == FTRACE_ADDR) + addr = OLD_FTRACE_ADDR; + + return addr; +} +#else +static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) +{ + return NOP; +} + +static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) +{ + return addr; +} +#endif + /* construct a branch (BL) instruction to addr */ -unsigned char *ftrace_call_replace(unsigned long pc, unsigned long addr) +#ifdef CONFIG_THUMB2_KERNEL +static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) { + unsigned long s, j1, j2, i1, i2, imm10, imm11; + unsigned long first, second; long offset; - offset = (long)addr - (long)(pc + PC_OFFSET); + offset = (long)addr - (long)(pc + 4); + if (offset < -16777216 || offset > 16777214) { + WARN_ON_ONCE(1); + return 0; + } + + s = (offset >> 24) & 0x1; + i1 = (offset >> 23) & 0x1; + i2 = (offset >> 22) & 0x1; + imm10 = (offset >> 12) & 0x3ff; + imm11 = (offset >> 1) & 0x7ff; + + j1 = (!i1) ^ s; + j2 = (!i2) ^ s; + + first = 0xf000 | (s << 10) | imm10; + second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11; + + return (second << 16) | first; +} +#else +static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) +{ + long offset; + + offset = (long)addr - (long)(pc + 8); if (unlikely(offset < -33554432 || offset > 33554428)) { /* Can't generate branches that far (from ARM ARM). Ftrace * doesn't generate branches outside of kernel text. */ WARN_ON_ONCE(1); - return NULL; + return 0; } - offset = (offset >> 2) & BL_OFFSET_MASK; - bl_insn = BL_OPCODE | offset; - return (unsigned char *)&bl_insn; -} -int ftrace_modify_code(unsigned long pc, unsigned char *old_code, - unsigned char *new_code) -{ - unsigned long err = 0, replaced = 0, old, new; + offset = (offset >> 2) & 0x00ffffff; - old = *(unsigned long *)old_code; - new = *(unsigned long *)new_code; + return 0xeb000000 | offset; +} +#endif - __asm__ __volatile__ ( - "1: ldr %1, [%2] \n" - " cmp %1, %4 \n" - "2: streq %3, [%2] \n" - " cmpne %1, %3 \n" - " movne %0, #2 \n" - "3:\n" +static int ftrace_modify_code(unsigned long pc, unsigned long old, + unsigned long new) +{ + unsigned long replaced; - ".pushsection .fixup, \"ax\"\n" - "4: mov %0, #1 \n" - " b 3b \n" - ".popsection\n" + if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE)) + return -EFAULT; - ".pushsection __ex_table, \"a\"\n" - " .long 1b, 4b \n" - " .long 2b, 4b \n" - ".popsection\n" + if (replaced != old) + return -EINVAL; - : "=r"(err), "=r"(replaced) - : "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced) - : "memory"); + if (probe_kernel_write((void *)pc, &new, MCOUNT_INSN_SIZE)) + return -EPERM; - if (!err && (replaced == old)) - flush_icache_range(pc, pc + MCOUNT_INSN_SIZE); + flush_icache_range(pc, pc + MCOUNT_INSN_SIZE); - return err; + return 0; } int ftrace_update_ftrace_func(ftrace_func_t func) { - int ret; unsigned long pc, old; - unsigned char *new; + unsigned long new; + int ret; pc = (unsigned long)&ftrace_call; memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE); new = ftrace_call_replace(pc, (unsigned long)func); - ret = ftrace_modify_code(pc, (unsigned char *)&old, new); + + ret = ftrace_modify_code(pc, old, new); + +#ifdef CONFIG_OLD_MCOUNT + if (!ret) { + pc = (unsigned long)&ftrace_call_old; + memcpy(&old, &ftrace_call_old, MCOUNT_INSN_SIZE); + new = ftrace_call_replace(pc, (unsigned long)func); + + ret = ftrace_modify_code(pc, old, new); + } +#endif + + return ret; +} + +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned long new, old; + unsigned long ip = rec->ip; + + old = ftrace_nop_replace(rec); + new = ftrace_call_replace(ip, adjust_address(rec, addr)); + + return ftrace_modify_code(rec->ip, old, new); +} + +int ftrace_make_nop(struct module *mod, + struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned long ip = rec->ip; + unsigned long old; + unsigned long new; + int ret; + + old = ftrace_call_replace(ip, adjust_address(rec, addr)); + new = ftrace_nop_replace(rec); + ret = ftrace_modify_code(ip, old, new); + +#ifdef CONFIG_OLD_MCOUNT + if (ret == -EINVAL && addr == MCOUNT_ADDR) { + rec->arch.old_mcount = true; + + old = ftrace_call_replace(ip, adjust_address(rec, addr)); + new = ftrace_nop_replace(rec); + ret = ftrace_modify_code(ip, old, new); + } +#endif + return ret; } -/* run from ftrace_init with irqs disabled */ int __init ftrace_dyn_arch_init(void *data) { - ftrace_mcount_set(data); + *(unsigned long *)data = 0; + return 0; } diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index b9505aa267c0..bbecaac1e013 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -15,55 +15,6 @@ #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) #define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2) - .align 2 - .type __switch_data, %object -__switch_data: - .long __mmap_switched - .long __data_loc @ r4 - .long _data @ r5 - .long __bss_start @ r6 - .long _end @ r7 - .long processor_id @ r4 - .long __machine_arch_type @ r5 - .long __atags_pointer @ r6 - .long cr_alignment @ r7 - .long init_thread_union + THREAD_START_SP @ sp - -/* - * The following fragment of code is executed with the MMU on in MMU mode, - * and uses absolute addresses; this is not position independent. - * - * r0 = cp#15 control register - * r1 = machine ID - * r2 = atags pointer - * r9 = processor ID - */ -__mmap_switched: - adr r3, __switch_data + 4 - - ldmia r3!, {r4, r5, r6, r7} - cmp r4, r5 @ Copy data segment if needed -1: cmpne r5, r6 - ldrne fp, [r4], #4 - strne fp, [r5], #4 - bne 1b - - mov fp, #0 @ Clear BSS (and zero fp) -1: cmp r6, r7 - strcc fp, [r6],#4 - bcc 1b - - ARM( ldmia r3, {r4, r5, r6, r7, sp}) - THUMB( ldmia r3, {r4, r5, r6, r7} ) - THUMB( ldr sp, [r3, #16] ) - str r9, [r4] @ Save processor ID - str r1, [r5] @ Save machine type - str r2, [r6] @ Save atags pointer - bic r4, r0, #CR_A @ Clear 'A' bit - stmia r7, {r0, r4} @ Save control register values - b start_kernel -ENDPROC(__mmap_switched) - /* * Exception handling. Something went wrong and we can't proceed. We * ought to tell the user, but since we don't have any guarantee that @@ -73,21 +24,7 @@ ENDPROC(__mmap_switched) * and hope for the best (useful if bootloader fails to pass a proper * machine ID for example). */ -__error_p: -#ifdef CONFIG_DEBUG_LL - adr r0, str_p1 - bl printascii - mov r0, r9 - bl printhex8 - adr r0, str_p2 - bl printascii - b __error -str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x" -str_p2: .asciz ").\n" - .align -#endif -ENDPROC(__error_p) - + __HEAD __error_a: #ifdef CONFIG_DEBUG_LL mov r4, r1 @ preserve machine ID @@ -97,7 +34,7 @@ __error_a: bl printhex8 adr r0, str_a2 bl printascii - adr r3, 4f + adr r3, __lookup_machine_type_data ldmia r3, {r4, r5, r6} @ get machine desc list sub r4, r3, r4 @ get offset between virt&phys add r5, r5, r4 @ convert virt addresses to @@ -125,78 +62,6 @@ str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n" .align #endif -__error: -#ifdef CONFIG_ARCH_RPC -/* - * Turn the screen red on a error - RiscPC only. - */ - mov r0, #0x02000000 - mov r3, #0x11 - orr r3, r3, r3, lsl #8 - orr r3, r3, r3, lsl #16 - str r3, [r0], #4 - str r3, [r0], #4 - str r3, [r0], #4 - str r3, [r0], #4 -#endif -1: mov r0, r0 - b 1b -ENDPROC(__error) - - -/* - * Read processor ID register (CP#15, CR0), and look up in the linker-built - * supported processor list. Note that we can't use the absolute addresses - * for the __proc_info lists since we aren't running with the MMU on - * (and therefore, we are not in the correct address space). We have to - * calculate the offset. - * - * r9 = cpuid - * Returns: - * r3, r4, r6 corrupted - * r5 = proc_info pointer in physical address space - * r9 = cpuid (preserved) - */ -__lookup_processor_type: - adr r3, 3f - ldmia r3, {r5 - r7} - add r3, r3, #8 - sub r3, r3, r7 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space -1: ldmia r5, {r3, r4} @ value, mask - and r4, r4, r9 @ mask wanted bits - teq r3, r4 - beq 2f - add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list) - cmp r5, r6 - blo 1b - mov r5, #0 @ unknown processor -2: mov pc, lr -ENDPROC(__lookup_processor_type) - -/* - * This provides a C-API version of the above function. - */ -ENTRY(lookup_processor_type) - stmfd sp!, {r4 - r7, r9, lr} - mov r9, r0 - bl __lookup_processor_type - mov r0, r5 - ldmfd sp!, {r4 - r7, r9, pc} -ENDPROC(lookup_processor_type) - -/* - * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for - * more information about the __proc_info and __arch_info structures. - */ - .align 2 -3: .long __proc_info_begin - .long __proc_info_end -4: .long . - .long __arch_info_begin - .long __arch_info_end - /* * Lookup machine architecture in the linker-build list of architectures. * Note that we can't use the absolute addresses for the __arch_info @@ -209,7 +74,7 @@ ENDPROC(lookup_processor_type) * r5 = mach_info pointer in physical address space */ __lookup_machine_type: - adr r3, 4b + adr r3, __lookup_machine_type_data ldmia r3, {r4, r5, r6} sub r3, r3, r4 @ get offset between virt&phys add r5, r5, r3 @ convert virt addresses to @@ -225,15 +90,16 @@ __lookup_machine_type: ENDPROC(__lookup_machine_type) /* - * This provides a C-API version of the above function. + * Look in arch/arm/kernel/arch.[ch] for information about the + * __arch_info structures. */ -ENTRY(lookup_machine_type) - stmfd sp!, {r4 - r6, lr} - mov r1, r0 - bl __lookup_machine_type - mov r0, r5 - ldmfd sp!, {r4 - r6, pc} -ENDPROC(lookup_machine_type) + .align 2 + .type __lookup_machine_type_data, %object +__lookup_machine_type_data: + .long . + .long __arch_info_begin + .long __arch_info_end + .size __lookup_machine_type_data, . - __lookup_machine_type_data /* Determine validity of the r2 atags pointer. The heuristic requires * that the pointer be aligned, in the first 16k of physical RAM and @@ -265,3 +131,150 @@ __vet_atags: 1: mov r2, #0 mov pc, lr ENDPROC(__vet_atags) + +/* + * The following fragment of code is executed with the MMU on in MMU mode, + * and uses absolute addresses; this is not position independent. + * + * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags pointer + * r9 = processor ID + */ + __INIT +__mmap_switched: + adr r3, __mmap_switched_data + + ldmia r3!, {r4, r5, r6, r7} + cmp r4, r5 @ Copy data segment if needed +1: cmpne r5, r6 + ldrne fp, [r4], #4 + strne fp, [r5], #4 + bne 1b + + mov fp, #0 @ Clear BSS (and zero fp) +1: cmp r6, r7 + strcc fp, [r6],#4 + bcc 1b + + ARM( ldmia r3, {r4, r5, r6, r7, sp}) + THUMB( ldmia r3, {r4, r5, r6, r7} ) + THUMB( ldr sp, [r3, #16] ) + str r9, [r4] @ Save processor ID + str r1, [r5] @ Save machine type + str r2, [r6] @ Save atags pointer + bic r4, r0, #CR_A @ Clear 'A' bit + stmia r7, {r0, r4} @ Save control register values + b start_kernel +ENDPROC(__mmap_switched) + + .align 2 + .type __mmap_switched_data, %object +__mmap_switched_data: + .long __data_loc @ r4 + .long _sdata @ r5 + .long __bss_start @ r6 + .long _end @ r7 + .long processor_id @ r4 + .long __machine_arch_type @ r5 + .long __atags_pointer @ r6 + .long cr_alignment @ r7 + .long init_thread_union + THREAD_START_SP @ sp + .size __mmap_switched_data, . - __mmap_switched_data + +/* + * This provides a C-API version of __lookup_machine_type + */ +ENTRY(lookup_machine_type) + stmfd sp!, {r4 - r6, lr} + mov r1, r0 + bl __lookup_machine_type + mov r0, r5 + ldmfd sp!, {r4 - r6, pc} +ENDPROC(lookup_machine_type) + +/* + * This provides a C-API version of __lookup_processor_type + */ +ENTRY(lookup_processor_type) + stmfd sp!, {r4 - r6, r9, lr} + mov r9, r0 + bl __lookup_processor_type + mov r0, r5 + ldmfd sp!, {r4 - r6, r9, pc} +ENDPROC(lookup_processor_type) + +/* + * Read processor ID register (CP#15, CR0), and look up in the linker-built + * supported processor list. Note that we can't use the absolute addresses + * for the __proc_info lists since we aren't running with the MMU on + * (and therefore, we are not in the correct address space). We have to + * calculate the offset. + * + * r9 = cpuid + * Returns: + * r3, r4, r6 corrupted + * r5 = proc_info pointer in physical address space + * r9 = cpuid (preserved) + */ + __CPUINIT +__lookup_processor_type: + adr r3, __lookup_processor_type_data + ldmia r3, {r4 - r6} + sub r3, r3, r4 @ get offset between virt&phys + add r5, r5, r3 @ convert virt addresses to + add r6, r6, r3 @ physical address space +1: ldmia r5, {r3, r4} @ value, mask + and r4, r4, r9 @ mask wanted bits + teq r3, r4 + beq 2f + add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list) + cmp r5, r6 + blo 1b + mov r5, #0 @ unknown processor +2: mov pc, lr +ENDPROC(__lookup_processor_type) + +/* + * Look in <asm/procinfo.h> for information about the __proc_info structure. + */ + .align 2 + .type __lookup_processor_type_data, %object +__lookup_processor_type_data: + .long . + .long __proc_info_begin + .long __proc_info_end + .size __lookup_processor_type_data, . - __lookup_processor_type_data + +__error_p: +#ifdef CONFIG_DEBUG_LL + adr r0, str_p1 + bl printascii + mov r0, r9 + bl printhex8 + adr r0, str_p2 + bl printascii + b __error +str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x" +str_p2: .asciz ").\n" + .align +#endif +ENDPROC(__error_p) + +__error: +#ifdef CONFIG_ARCH_RPC +/* + * Turn the screen red on a error - RiscPC only. + */ + mov r0, #0x02000000 + mov r3, #0x11 + orr r3, r3, r3, lsl #8 + orr r3, r3, r3, lsl #16 + str r3, [r0], #4 + str r3, [r0], #4 + str r3, [r0], #4 + str r3, [r0], #4 +#endif +1: mov r0, r0 + b 1b +ENDPROC(__error) diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 573b803dc6bf..814ce1a73270 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -48,8 +48,6 @@ ENTRY(stext) movs r8, r5 @ invalid machine (r5=0)? beq __error_a @ yes, error 'a' - ldr r13, __switch_data @ address to jump to after - @ the initialization is done adr lr, BSYM(__after_proc_init) @ return (PIC) address ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) @@ -87,8 +85,7 @@ __after_proc_init: mcr p15, 0, r0, c1, c0, 0 @ write control reg #endif /* CONFIG_CPU_CP15 */ - mov r3, r13 - mov pc, r3 @ clear the BSS and jump + b __mmap_switched @ clear the BSS and jump @ to start_kernel ENDPROC(__after_proc_init) .ltorg diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index eb62bf947212..dd6b369ac69c 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -22,6 +22,10 @@ #include <asm/thread_info.h> #include <asm/system.h> +#ifdef CONFIG_DEBUG_LL +#include <mach/debug-macro.S> +#endif + #if (PHYS_OFFSET & 0x001fffff) #error "PHYS_OFFSET must be at an even 2MiB boundary!" #endif @@ -86,6 +90,9 @@ ENTRY(stext) movs r8, r5 @ invalid machine (r5=0)? beq __error_a @ yes, error 'a' bl __vet_atags +#ifdef CONFIG_SMP_ON_UP + bl __fixup_smp +#endif bl __create_page_tables /* @@ -95,113 +102,15 @@ ENTRY(stext) * above. On return, the CPU will be ready for the MMU to be * turned on, and r0 will hold the CPU control register value. */ - ldr r13, __switch_data @ address to jump to after + ldr r13, =__mmap_switched @ address to jump to after @ mmu has been enabled - adr lr, BSYM(__enable_mmu) @ return (PIC) address + adr lr, BSYM(1f) @ return (PIC) address ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) THUMB( mov pc, r12 ) +1: b __enable_mmu ENDPROC(stext) - -#if defined(CONFIG_SMP) -ENTRY(secondary_startup) - /* - * Common entry point for secondary CPUs. - * - * Ensure that we're in SVC mode, and IRQs are disabled. Lookup - * the processor type - there is no need to check the machine type - * as it has already been validated by the primary processor. - */ - setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 - mrc p15, 0, r9, c0, c0 @ get processor id - bl __lookup_processor_type - movs r10, r5 @ invalid processor? - moveq r0, #'p' @ yes, error 'p' - beq __error - - /* - * Use the page tables supplied from __cpu_up. - */ - adr r4, __secondary_data - ldmia r4, {r5, r7, r12} @ address to jump to after - sub r4, r4, r5 @ mmu has been enabled - ldr r4, [r7, r4] @ get secondary_data.pgdir - adr lr, BSYM(__enable_mmu) @ return address - mov r13, r12 @ __secondary_switched address - ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor - @ (return control reg) - THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) -ENDPROC(secondary_startup) - - /* - * r6 = &secondary_data - */ -ENTRY(__secondary_switched) - ldr sp, [r7, #4] @ get secondary_data.stack - mov fp, #0 - b secondary_start_kernel -ENDPROC(__secondary_switched) - - .type __secondary_data, %object -__secondary_data: - .long . - .long secondary_data - .long __secondary_switched -#endif /* defined(CONFIG_SMP) */ - - - -/* - * Setup common bits before finally enabling the MMU. Essentially - * this is just loading the page table pointer and domain access - * registers. - */ -__enable_mmu: -#ifdef CONFIG_ALIGNMENT_TRAP - orr r0, r0, #CR_A -#else - bic r0, r0, #CR_A -#endif -#ifdef CONFIG_CPU_DCACHE_DISABLE - bic r0, r0, #CR_C -#endif -#ifdef CONFIG_CPU_BPREDICT_DISABLE - bic r0, r0, #CR_Z -#endif -#ifdef CONFIG_CPU_ICACHE_DISABLE - bic r0, r0, #CR_I -#endif - mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_IO, DOMAIN_CLIENT)) - mcr p15, 0, r5, c3, c0, 0 @ load domain access register - mcr p15, 0, r4, c2, c0, 0 @ load page table pointer - b __turn_mmu_on -ENDPROC(__enable_mmu) - -/* - * Enable the MMU. This completely changes the structure of the visible - * memory space. You will not be able to trace execution through this. - * If you have an enquiry about this, *please* check the linux-arm-kernel - * mailing list archives BEFORE sending another post to the list. - * - * r0 = cp#15 control register - * r13 = *virtual* address to jump to upon completion - * - * other registers depend on the function called upon completion - */ - .align 5 -__turn_mmu_on: - mov r0, r0 - mcr p15, 0, r0, c1, c0, 0 @ write control reg - mrc p15, 0, r3, c0, c0, 0 @ read id reg - mov r3, r3 - mov r3, r13 - mov pc, r3 -ENDPROC(__turn_mmu_on) - + .ltorg /* * Setup the initial page tables. We only setup the barest @@ -213,7 +122,7 @@ ENDPROC(__turn_mmu_on) * r10 = procinfo * * Returns: - * r0, r3, r6, r7 corrupted + * r0, r3, r5-r7 corrupted * r4 = physical page table address */ __create_page_tables: @@ -235,20 +144,30 @@ __create_page_tables: ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags /* - * Create identity mapping for first MB of kernel to - * cater for the MMU enable. This identity mapping - * will be removed by paging_init(). We use our current program - * counter to determine corresponding section base address. + * Create identity mapping to cater for __enable_mmu. + * This identity mapping will be removed by paging_init(). */ - mov r6, pc - mov r6, r6, lsr #20 @ start of kernel section - orr r3, r7, r6, lsl #20 @ flags + kernel base - str r3, [r4, r6, lsl #2] @ identity mapping + adr r0, __enable_mmu_loc + ldmia r0, {r3, r5, r6} + sub r0, r0, r3 @ virt->phys offset + add r5, r5, r0 @ phys __enable_mmu + add r6, r6, r0 @ phys __enable_mmu_end + mov r5, r5, lsr #20 + mov r6, r6, lsr #20 + +1: orr r3, r7, r5, lsl #20 @ flags + kernel base + str r3, [r4, r5, lsl #2] @ identity mapping + teq r5, r6 + addne r5, r5, #1 @ next section + bne 1b /* * Now setup the pagetables for our kernel direct * mapped region. */ + mov r3, pc + mov r3, r3, lsr #20 + orr r3, r7, r3, lsl #20 add r0, r4, #(KERNEL_START & 0xff000000) >> 18 str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]! ldr r6, =(KERNEL_END - 1) @@ -289,24 +208,35 @@ __create_page_tables: str r6, [r0] #ifdef CONFIG_DEBUG_LL - ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags +#ifndef CONFIG_DEBUG_ICEDCC /* * Map in IO space for serial debugging. * This allows debug messages to be output * via a serial console before paging_init. */ - ldr r3, [r8, #MACHINFO_PGOFFIO] + addruart r7, r3 + + mov r3, r3, lsr #20 + mov r3, r3, lsl #2 + add r0, r4, r3 rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long) cmp r3, #0x0800 @ limit to 512MB movhi r3, #0x0800 add r6, r0, r3 - ldr r3, [r8, #MACHINFO_PHYSIO] - orr r3, r3, r7 + mov r3, r7, lsr #20 + ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags + orr r3, r7, r3, lsl #20 1: str r3, [r0], #4 add r3, r3, #1 << 20 teq r0, r6 bne 1b + +#else /* CONFIG_DEBUG_ICEDCC */ + /* we don't need any serial debugging mappings for ICEDCC */ + ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags +#endif /* !CONFIG_DEBUG_ICEDCC */ + #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS) /* * If we're using the NetWinder or CATS, we also need to map @@ -332,5 +262,168 @@ __create_page_tables: mov pc, lr ENDPROC(__create_page_tables) .ltorg +__enable_mmu_loc: + .long . + .long __enable_mmu + .long __enable_mmu_end + +#if defined(CONFIG_SMP) + __CPUINIT +ENTRY(secondary_startup) + /* + * Common entry point for secondary CPUs. + * + * Ensure that we're in SVC mode, and IRQs are disabled. Lookup + * the processor type - there is no need to check the machine type + * as it has already been validated by the primary processor. + */ + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 + mrc p15, 0, r9, c0, c0 @ get processor id + bl __lookup_processor_type + movs r10, r5 @ invalid processor? + moveq r0, #'p' @ yes, error 'p' + beq __error_p + + /* + * Use the page tables supplied from __cpu_up. + */ + adr r4, __secondary_data + ldmia r4, {r5, r7, r12} @ address to jump to after + sub r4, r4, r5 @ mmu has been enabled + ldr r4, [r7, r4] @ get secondary_data.pgdir + adr lr, BSYM(__enable_mmu) @ return address + mov r13, r12 @ __secondary_switched address + ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor + @ (return control reg) + THUMB( add r12, r10, #PROCINFO_INITFUNC ) + THUMB( mov pc, r12 ) +ENDPROC(secondary_startup) + + /* + * r6 = &secondary_data + */ +ENTRY(__secondary_switched) + ldr sp, [r7, #4] @ get secondary_data.stack + mov fp, #0 + b secondary_start_kernel +ENDPROC(__secondary_switched) + + .type __secondary_data, %object +__secondary_data: + .long . + .long secondary_data + .long __secondary_switched +#endif /* defined(CONFIG_SMP) */ + + + +/* + * Setup common bits before finally enabling the MMU. Essentially + * this is just loading the page table pointer and domain access + * registers. + * + * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags pointer + * r4 = page table pointer + * r9 = processor ID + * r13 = *virtual* address to jump to upon completion + */ +__enable_mmu: +#ifdef CONFIG_ALIGNMENT_TRAP + orr r0, r0, #CR_A +#else + bic r0, r0, #CR_A +#endif +#ifdef CONFIG_CPU_DCACHE_DISABLE + bic r0, r0, #CR_C +#endif +#ifdef CONFIG_CPU_BPREDICT_DISABLE + bic r0, r0, #CR_Z +#endif +#ifdef CONFIG_CPU_ICACHE_DISABLE + bic r0, r0, #CR_I +#endif + mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_IO, DOMAIN_CLIENT)) + mcr p15, 0, r5, c3, c0, 0 @ load domain access register + mcr p15, 0, r4, c2, c0, 0 @ load page table pointer + b __turn_mmu_on +ENDPROC(__enable_mmu) + +/* + * Enable the MMU. This completely changes the structure of the visible + * memory space. You will not be able to trace execution through this. + * If you have an enquiry about this, *please* check the linux-arm-kernel + * mailing list archives BEFORE sending another post to the list. + * + * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags pointer + * r9 = processor ID + * r13 = *virtual* address to jump to upon completion + * + * other registers depend on the function called upon completion + */ + .align 5 +__turn_mmu_on: + mov r0, r0 + mcr p15, 0, r0, c1, c0, 0 @ write control reg + mrc p15, 0, r3, c0, c0, 0 @ read id reg + mov r3, r3 + mov r3, r13 + mov pc, r3 +__enable_mmu_end: +ENDPROC(__turn_mmu_on) + + +#ifdef CONFIG_SMP_ON_UP +__fixup_smp: + mov r7, #0x00070000 + orr r6, r7, #0xff000000 @ mask 0xff070000 + orr r7, r7, #0x41000000 @ val 0x41070000 + and r0, r9, r6 + teq r0, r7 @ ARM CPU and ARMv6/v7? + bne __fixup_smp_on_up @ no, assume UP + + orr r6, r6, #0x0000ff00 + orr r6, r6, #0x000000f0 @ mask 0xff07fff0 + orr r7, r7, #0x0000b000 + orr r7, r7, #0x00000020 @ val 0x4107b020 + and r0, r9, r6 + teq r0, r7 @ ARM 11MPCore? + moveq pc, lr @ yes, assume SMP + + mrc p15, 0, r0, c0, c0, 5 @ read MPIDR + tst r0, #1 << 31 + movne pc, lr @ bit 31 => SMP + +__fixup_smp_on_up: + adr r0, 1f + ldmia r0, {r3, r6, r7} + sub r3, r0, r3 + add r6, r6, r3 + add r7, r7, r3 +2: cmp r6, r7 + ldmia r6!, {r0, r4} + strlo r4, [r0, r3] + blo 2b + mov pc, lr +ENDPROC(__fixup_smp) + +1: .word . + .word __smpalt_begin + .word __smpalt_end + + .pushsection .data + .globl smp_on_up +smp_on_up: + ALT_SMP(.long 1) + ALT_UP(.long 0) + .popsection + +#endif #include "head-common.S" diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c new file mode 100644 index 000000000000..54593b0c241b --- /dev/null +++ b/arch/arm/kernel/hw_breakpoint.c @@ -0,0 +1,849 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2009, 2010 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> + */ + +/* + * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility, + * using the CPU's debug registers. + */ +#define pr_fmt(fmt) "hw-breakpoint: " fmt + +#include <linux/errno.h> +#include <linux/perf_event.h> +#include <linux/hw_breakpoint.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> +#include <asm/cputype.h> +#include <asm/current.h> +#include <asm/hw_breakpoint.h> +#include <asm/kdebug.h> +#include <asm/system.h> +#include <asm/traps.h> + +/* Breakpoint currently in use for each BRP. */ +static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]); + +/* Watchpoint currently in use for each WRP. */ +static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]); + +/* Number of BRP/WRP registers on this CPU. */ +static int core_num_brps; +static int core_num_wrps; + +/* Debug architecture version. */ +static u8 debug_arch; + +/* Maximum supported watchpoint length. */ +static u8 max_watchpoint_len; + +/* Determine number of BRP registers available. */ +static int get_num_brps(void) +{ + u32 didr; + ARM_DBG_READ(c0, 0, didr); + return ((didr >> 24) & 0xf) + 1; +} + +/* Determine number of WRP registers available. */ +static int get_num_wrps(void) +{ + /* + * FIXME: When a watchpoint fires, the only way to work out which + * watchpoint it was is by disassembling the faulting instruction + * and working out the address of the memory access. + * + * Furthermore, we can only do this if the watchpoint was precise + * since imprecise watchpoints prevent us from calculating register + * based addresses. + * + * For the time being, we only report 1 watchpoint register so we + * always know which watchpoint fired. In the future we can either + * add a disassembler and address generation emulator, or we can + * insert a check to see if the DFAR is set on watchpoint exception + * entry [the ARM ARM states that the DFAR is UNKNOWN, but + * experience shows that it is set on some implementations]. + */ + +#if 0 + u32 didr, wrps; + ARM_DBG_READ(c0, 0, didr); + return ((didr >> 28) & 0xf) + 1; +#endif + + return 1; +} + +int hw_breakpoint_slots(int type) +{ + /* + * We can be called early, so don't rely on + * our static variables being initialised. + */ + switch (type) { + case TYPE_INST: + return get_num_brps(); + case TYPE_DATA: + return get_num_wrps(); + default: + pr_warning("unknown slot type: %d\n", type); + return 0; + } +} + +/* Determine debug architecture. */ +static u8 get_debug_arch(void) +{ + u32 didr; + + /* Do we implement the extended CPUID interface? */ + if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { + pr_warning("CPUID feature registers not supported. " + "Assuming v6 debug is present.\n"); + return ARM_DEBUG_ARCH_V6; + } + + ARM_DBG_READ(c0, 0, didr); + return (didr >> 16) & 0xf; +} + +/* Does this core support mismatch breakpoints? */ +static int core_has_mismatch_bps(void) +{ + return debug_arch >= ARM_DEBUG_ARCH_V7_ECP14 && core_num_brps > 1; +} + +u8 arch_get_debug_arch(void) +{ + return debug_arch; +} + +#define READ_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_READ(c ## M, OP2, VAL); \ + break + +#define WRITE_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_WRITE(c ## M, OP2, VAL);\ + break + +#define GEN_READ_WB_REG_CASES(OP2, VAL) \ + READ_WB_REG_CASE(OP2, 0, VAL); \ + READ_WB_REG_CASE(OP2, 1, VAL); \ + READ_WB_REG_CASE(OP2, 2, VAL); \ + READ_WB_REG_CASE(OP2, 3, VAL); \ + READ_WB_REG_CASE(OP2, 4, VAL); \ + READ_WB_REG_CASE(OP2, 5, VAL); \ + READ_WB_REG_CASE(OP2, 6, VAL); \ + READ_WB_REG_CASE(OP2, 7, VAL); \ + READ_WB_REG_CASE(OP2, 8, VAL); \ + READ_WB_REG_CASE(OP2, 9, VAL); \ + READ_WB_REG_CASE(OP2, 10, VAL); \ + READ_WB_REG_CASE(OP2, 11, VAL); \ + READ_WB_REG_CASE(OP2, 12, VAL); \ + READ_WB_REG_CASE(OP2, 13, VAL); \ + READ_WB_REG_CASE(OP2, 14, VAL); \ + READ_WB_REG_CASE(OP2, 15, VAL) + +#define GEN_WRITE_WB_REG_CASES(OP2, VAL) \ + WRITE_WB_REG_CASE(OP2, 0, VAL); \ + WRITE_WB_REG_CASE(OP2, 1, VAL); \ + WRITE_WB_REG_CASE(OP2, 2, VAL); \ + WRITE_WB_REG_CASE(OP2, 3, VAL); \ + WRITE_WB_REG_CASE(OP2, 4, VAL); \ + WRITE_WB_REG_CASE(OP2, 5, VAL); \ + WRITE_WB_REG_CASE(OP2, 6, VAL); \ + WRITE_WB_REG_CASE(OP2, 7, VAL); \ + WRITE_WB_REG_CASE(OP2, 8, VAL); \ + WRITE_WB_REG_CASE(OP2, 9, VAL); \ + WRITE_WB_REG_CASE(OP2, 10, VAL); \ + WRITE_WB_REG_CASE(OP2, 11, VAL); \ + WRITE_WB_REG_CASE(OP2, 12, VAL); \ + WRITE_WB_REG_CASE(OP2, 13, VAL); \ + WRITE_WB_REG_CASE(OP2, 14, VAL); \ + WRITE_WB_REG_CASE(OP2, 15, VAL) + +static u32 read_wb_reg(int n) +{ + u32 val = 0; + + switch (n) { + GEN_READ_WB_REG_CASES(ARM_OP2_BVR, val); + GEN_READ_WB_REG_CASES(ARM_OP2_BCR, val); + GEN_READ_WB_REG_CASES(ARM_OP2_WVR, val); + GEN_READ_WB_REG_CASES(ARM_OP2_WCR, val); + default: + pr_warning("attempt to read from unknown breakpoint " + "register %d\n", n); + } + + return val; +} + +static void write_wb_reg(int n, u32 val) +{ + switch (n) { + GEN_WRITE_WB_REG_CASES(ARM_OP2_BVR, val); + GEN_WRITE_WB_REG_CASES(ARM_OP2_BCR, val); + GEN_WRITE_WB_REG_CASES(ARM_OP2_WVR, val); + GEN_WRITE_WB_REG_CASES(ARM_OP2_WCR, val); + default: + pr_warning("attempt to write to unknown breakpoint " + "register %d\n", n); + } + isb(); +} + +/* + * In order to access the breakpoint/watchpoint control registers, + * we must be running in debug monitor mode. Unfortunately, we can + * be put into halting debug mode at any time by an external debugger + * but there is nothing we can do to prevent that. + */ +static int enable_monitor_mode(void) +{ + u32 dscr; + int ret = 0; + + ARM_DBG_READ(c1, 0, dscr); + + /* Ensure that halting mode is disabled. */ + if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, "halting debug mode enabled." + "Unable to access hardware resources.")) { + ret = -EPERM; + goto out; + } + + /* Write to the corresponding DSCR. */ + switch (debug_arch) { + case ARM_DEBUG_ARCH_V6: + case ARM_DEBUG_ARCH_V6_1: + ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN)); + break; + case ARM_DEBUG_ARCH_V7_ECP14: + ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN)); + break; + default: + ret = -ENODEV; + goto out; + } + + /* Check that the write made it through. */ + ARM_DBG_READ(c1, 0, dscr); + if (WARN_ONCE(!(dscr & ARM_DSCR_MDBGEN), + "failed to enable monitor mode.")) { + ret = -EPERM; + } + +out: + return ret; +} + +/* + * Check if 8-bit byte-address select is available. + * This clobbers WRP 0. + */ +static u8 get_max_wp_len(void) +{ + u32 ctrl_reg; + struct arch_hw_breakpoint_ctrl ctrl; + u8 size = 4; + + if (debug_arch < ARM_DEBUG_ARCH_V7_ECP14) + goto out; + + if (enable_monitor_mode()) + goto out; + + memset(&ctrl, 0, sizeof(ctrl)); + ctrl.len = ARM_BREAKPOINT_LEN_8; + ctrl_reg = encode_ctrl_reg(ctrl); + + write_wb_reg(ARM_BASE_WVR, 0); + write_wb_reg(ARM_BASE_WCR, ctrl_reg); + if ((read_wb_reg(ARM_BASE_WCR) & ctrl_reg) == ctrl_reg) + size = 8; + +out: + return size; +} + +u8 arch_get_max_wp_len(void) +{ + return max_watchpoint_len; +} + +/* + * Handler for reactivating a suspended watchpoint when the single + * step `mismatch' breakpoint is triggered. + */ +static void wp_single_step_handler(struct perf_event *bp, int unused, + struct perf_sample_data *data, + struct pt_regs *regs) +{ + perf_event_enable(counter_arch_bp(bp)->suspended_wp); + unregister_hw_breakpoint(bp); +} + +static int bp_is_single_step(struct perf_event *bp) +{ + return bp->overflow_handler == wp_single_step_handler; +} + +/* + * Install a perf counter breakpoint. + */ +int arch_install_hw_breakpoint(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + struct perf_event **slot, **slots; + int i, max_slots, ctrl_base, val_base, ret = 0; + + /* Ensure that we are in monitor mode and halting mode is disabled. */ + ret = enable_monitor_mode(); + if (ret) + goto out; + + if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) { + /* Breakpoint */ + ctrl_base = ARM_BASE_BCR; + val_base = ARM_BASE_BVR; + slots = __get_cpu_var(bp_on_reg); + max_slots = core_num_brps - 1; + + if (bp_is_single_step(bp)) { + info->ctrl.mismatch = 1; + i = max_slots; + slots[i] = bp; + goto setup; + } + } else { + /* Watchpoint */ + ctrl_base = ARM_BASE_WCR; + val_base = ARM_BASE_WVR; + slots = __get_cpu_var(wp_on_reg); + max_slots = core_num_wrps; + } + + for (i = 0; i < max_slots; ++i) { + slot = &slots[i]; + + if (!*slot) { + *slot = bp; + break; + } + } + + if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) { + ret = -EBUSY; + goto out; + } + +setup: + /* Setup the address register. */ + write_wb_reg(val_base + i, info->address); + + /* Setup the control register. */ + write_wb_reg(ctrl_base + i, encode_ctrl_reg(info->ctrl) | 0x1); + +out: + return ret; +} + +void arch_uninstall_hw_breakpoint(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + struct perf_event **slot, **slots; + int i, max_slots, base; + + if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) { + /* Breakpoint */ + base = ARM_BASE_BCR; + slots = __get_cpu_var(bp_on_reg); + max_slots = core_num_brps - 1; + + if (bp_is_single_step(bp)) { + i = max_slots; + slots[i] = NULL; + goto reset; + } + } else { + /* Watchpoint */ + base = ARM_BASE_WCR; + slots = __get_cpu_var(wp_on_reg); + max_slots = core_num_wrps; + } + + /* Remove the breakpoint. */ + for (i = 0; i < max_slots; ++i) { + slot = &slots[i]; + + if (*slot == bp) { + *slot = NULL; + break; + } + } + + if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) + return; + +reset: + /* Reset the control register. */ + write_wb_reg(base + i, 0); +} + +static int get_hbp_len(u8 hbp_len) +{ + unsigned int len_in_bytes = 0; + + switch (hbp_len) { + case ARM_BREAKPOINT_LEN_1: + len_in_bytes = 1; + break; + case ARM_BREAKPOINT_LEN_2: + len_in_bytes = 2; + break; + case ARM_BREAKPOINT_LEN_4: + len_in_bytes = 4; + break; + case ARM_BREAKPOINT_LEN_8: + len_in_bytes = 8; + break; + } + + return len_in_bytes; +} + +/* + * Check whether bp virtual address is in kernel space. + */ +int arch_check_bp_in_kernelspace(struct perf_event *bp) +{ + unsigned int len; + unsigned long va; + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + + va = info->address; + len = get_hbp_len(info->ctrl.len); + + return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE); +} + +/* + * Extract generic type and length encodings from an arch_hw_breakpoint_ctrl. + * Hopefully this will disappear when ptrace can bypass the conversion + * to generic breakpoint descriptions. + */ +int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl, + int *gen_len, int *gen_type) +{ + /* Type */ + switch (ctrl.type) { + case ARM_BREAKPOINT_EXECUTE: + *gen_type = HW_BREAKPOINT_X; + break; + case ARM_BREAKPOINT_LOAD: + *gen_type = HW_BREAKPOINT_R; + break; + case ARM_BREAKPOINT_STORE: + *gen_type = HW_BREAKPOINT_W; + break; + case ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE: + *gen_type = HW_BREAKPOINT_RW; + break; + default: + return -EINVAL; + } + + /* Len */ + switch (ctrl.len) { + case ARM_BREAKPOINT_LEN_1: + *gen_len = HW_BREAKPOINT_LEN_1; + break; + case ARM_BREAKPOINT_LEN_2: + *gen_len = HW_BREAKPOINT_LEN_2; + break; + case ARM_BREAKPOINT_LEN_4: + *gen_len = HW_BREAKPOINT_LEN_4; + break; + case ARM_BREAKPOINT_LEN_8: + *gen_len = HW_BREAKPOINT_LEN_8; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* + * Construct an arch_hw_breakpoint from a perf_event. + */ +static int arch_build_bp_info(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + + /* Type */ + switch (bp->attr.bp_type) { + case HW_BREAKPOINT_X: + info->ctrl.type = ARM_BREAKPOINT_EXECUTE; + break; + case HW_BREAKPOINT_R: + info->ctrl.type = ARM_BREAKPOINT_LOAD; + break; + case HW_BREAKPOINT_W: + info->ctrl.type = ARM_BREAKPOINT_STORE; + break; + case HW_BREAKPOINT_RW: + info->ctrl.type = ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE; + break; + default: + return -EINVAL; + } + + /* Len */ + switch (bp->attr.bp_len) { + case HW_BREAKPOINT_LEN_1: + info->ctrl.len = ARM_BREAKPOINT_LEN_1; + break; + case HW_BREAKPOINT_LEN_2: + info->ctrl.len = ARM_BREAKPOINT_LEN_2; + break; + case HW_BREAKPOINT_LEN_4: + info->ctrl.len = ARM_BREAKPOINT_LEN_4; + break; + case HW_BREAKPOINT_LEN_8: + info->ctrl.len = ARM_BREAKPOINT_LEN_8; + if ((info->ctrl.type != ARM_BREAKPOINT_EXECUTE) + && max_watchpoint_len >= 8) + break; + default: + return -EINVAL; + } + + /* Address */ + info->address = bp->attr.bp_addr; + + /* Privilege */ + info->ctrl.privilege = ARM_BREAKPOINT_USER; + if (arch_check_bp_in_kernelspace(bp) && !bp_is_single_step(bp)) + info->ctrl.privilege |= ARM_BREAKPOINT_PRIV; + + /* Enabled? */ + info->ctrl.enabled = !bp->attr.disabled; + + /* Mismatch */ + info->ctrl.mismatch = 0; + + return 0; +} + +/* + * Validate the arch-specific HW Breakpoint register settings. + */ +int arch_validate_hwbkpt_settings(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + int ret = 0; + u32 bytelen, max_len, offset, alignment_mask = 0x3; + + /* Build the arch_hw_breakpoint. */ + ret = arch_build_bp_info(bp); + if (ret) + goto out; + + /* Check address alignment. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_8) + alignment_mask = 0x7; + if (info->address & alignment_mask) { + /* + * Try to fix the alignment. This may result in a length + * that is too large, so we must check for that. + */ + bytelen = get_hbp_len(info->ctrl.len); + max_len = info->ctrl.type == ARM_BREAKPOINT_EXECUTE ? 4 : + max_watchpoint_len; + + if (max_len >= 8) + offset = info->address & 0x7; + else + offset = info->address & 0x3; + + if (bytelen > (1 << ((max_len - (offset + 1)) >> 1))) { + ret = -EFBIG; + goto out; + } + + info->ctrl.len <<= offset; + info->address &= ~offset; + + pr_debug("breakpoint alignment fixup: length = 0x%x, " + "address = 0x%x\n", info->ctrl.len, info->address); + } + + /* + * Currently we rely on an overflow handler to take + * care of single-stepping the breakpoint when it fires. + * In the case of userspace breakpoints on a core with V7 debug, + * we can use the mismatch feature as a poor-man's hardware single-step. + */ + if (WARN_ONCE(!bp->overflow_handler && + (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_bps()), + "overflow handler required but none found")) { + ret = -EINVAL; + goto out; + } +out: + return ret; +} + +static void update_mismatch_flag(int idx, int flag) +{ + struct perf_event *bp = __get_cpu_var(bp_on_reg[idx]); + struct arch_hw_breakpoint *info; + + if (bp == NULL) + return; + + info = counter_arch_bp(bp); + + /* Update the mismatch field to enter/exit `single-step' mode */ + if (!bp->overflow_handler && info->ctrl.mismatch != flag) { + info->ctrl.mismatch = flag; + write_wb_reg(ARM_BASE_BCR + idx, encode_ctrl_reg(info->ctrl) | 0x1); + } +} + +static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) +{ + int i; + struct perf_event *bp, **slots = __get_cpu_var(wp_on_reg); + struct arch_hw_breakpoint *info; + struct perf_event_attr attr; + + /* Without a disassembler, we can only handle 1 watchpoint. */ + BUG_ON(core_num_wrps > 1); + + hw_breakpoint_init(&attr); + attr.bp_addr = regs->ARM_pc & ~0x3; + attr.bp_len = HW_BREAKPOINT_LEN_4; + attr.bp_type = HW_BREAKPOINT_X; + + for (i = 0; i < core_num_wrps; ++i) { + rcu_read_lock(); + + if (slots[i] == NULL) { + rcu_read_unlock(); + continue; + } + + /* + * The DFAR is an unknown value. Since we only allow a + * single watchpoint, we can set the trigger to the lowest + * possible faulting address. + */ + info = counter_arch_bp(slots[i]); + info->trigger = slots[i]->attr.bp_addr; + pr_debug("watchpoint fired: address = 0x%x\n", info->trigger); + perf_bp_event(slots[i], regs); + + /* + * If no overflow handler is present, insert a temporary + * mismatch breakpoint so we can single-step over the + * watchpoint trigger. + */ + if (!slots[i]->overflow_handler) { + bp = register_user_hw_breakpoint(&attr, + wp_single_step_handler, + current); + counter_arch_bp(bp)->suspended_wp = slots[i]; + perf_event_disable(slots[i]); + } + + rcu_read_unlock(); + } +} + +static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs) +{ + int i; + int mismatch; + u32 ctrl_reg, val, addr; + struct perf_event *bp, **slots = __get_cpu_var(bp_on_reg); + struct arch_hw_breakpoint *info; + struct arch_hw_breakpoint_ctrl ctrl; + + /* The exception entry code places the amended lr in the PC. */ + addr = regs->ARM_pc; + + for (i = 0; i < core_num_brps; ++i) { + rcu_read_lock(); + + bp = slots[i]; + + if (bp == NULL) { + rcu_read_unlock(); + continue; + } + + mismatch = 0; + + /* Check if the breakpoint value matches. */ + val = read_wb_reg(ARM_BASE_BVR + i); + if (val != (addr & ~0x3)) + goto unlock; + + /* Possible match, check the byte address select to confirm. */ + ctrl_reg = read_wb_reg(ARM_BASE_BCR + i); + decode_ctrl_reg(ctrl_reg, &ctrl); + if ((1 << (addr & 0x3)) & ctrl.len) { + mismatch = 1; + info = counter_arch_bp(bp); + info->trigger = addr; + } + +unlock: + if ((mismatch && !info->ctrl.mismatch) || bp_is_single_step(bp)) { + pr_debug("breakpoint fired: address = 0x%x\n", addr); + perf_bp_event(bp, regs); + } + + update_mismatch_flag(i, mismatch); + rcu_read_unlock(); + } +} + +/* + * Called from either the Data Abort Handler [watchpoint] or the + * Prefetch Abort Handler [breakpoint]. + */ +static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + int ret = 1; /* Unhandled fault. */ + u32 dscr; + + /* We only handle watchpoints and hardware breakpoints. */ + ARM_DBG_READ(c1, 0, dscr); + + /* Perform perf callbacks. */ + switch (ARM_DSCR_MOE(dscr)) { + case ARM_ENTRY_BREAKPOINT: + breakpoint_handler(addr, regs); + break; + case ARM_ENTRY_ASYNC_WATCHPOINT: + WARN_ON("Asynchronous watchpoint exception taken. " + "Debugging results may be unreliable"); + case ARM_ENTRY_SYNC_WATCHPOINT: + watchpoint_handler(addr, regs); + break; + default: + goto out; + } + + ret = 0; +out: + return ret; +} + +/* + * One-time initialisation. + */ +static void __init reset_ctrl_regs(void *unused) +{ + int i; + + if (enable_monitor_mode()) + return; + + for (i = 0; i < core_num_brps; ++i) { + write_wb_reg(ARM_BASE_BCR + i, 0UL); + write_wb_reg(ARM_BASE_BVR + i, 0UL); + } + + for (i = 0; i < core_num_wrps; ++i) { + write_wb_reg(ARM_BASE_WCR + i, 0UL); + write_wb_reg(ARM_BASE_WVR + i, 0UL); + } +} + +static int __init arch_hw_breakpoint_init(void) +{ + int ret = 0; + u32 dscr; + + debug_arch = get_debug_arch(); + + if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) { + pr_info("debug architecture 0x%x unsupported.\n", debug_arch); + ret = -ENODEV; + goto out; + } + + /* Determine how many BRPs/WRPs are available. */ + core_num_brps = get_num_brps(); + core_num_wrps = get_num_wrps(); + + pr_info("found %d breakpoint and %d watchpoint registers.\n", + core_num_brps, core_num_wrps); + + if (core_has_mismatch_bps()) + pr_info("1 breakpoint reserved for watchpoint single-step.\n"); + + ARM_DBG_READ(c1, 0, dscr); + if (dscr & ARM_DSCR_HDBGEN) { + pr_warning("halting debug mode enabled. Assuming maximum " + "watchpoint size of 4 bytes."); + } else { + /* Work out the maximum supported watchpoint length. */ + max_watchpoint_len = get_max_wp_len(); + pr_info("maximum watchpoint size is %u bytes.\n", + max_watchpoint_len); + + /* + * Reset the breakpoint resources. We assume that a halting + * debugger will leave the world in a nice state for us. + */ + smp_call_function(reset_ctrl_regs, NULL, 1); + reset_ctrl_regs(NULL); + } + + /* Register debug fault handler. */ + hook_fault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT, + "watchpoint debug exception"); + hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT, + "breakpoint debug exception"); + +out: + return ret; +} +arch_initcall(arch_hw_breakpoint_init); + +void hw_breakpoint_pmu_read(struct perf_event *bp) +{ +} + +/* + * Dummy function to register with die_notifier. + */ +int hw_breakpoint_exceptions_notify(struct notifier_block *unused, + unsigned long val, void *data) +{ + return NOTIFY_DONE; +} diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 6b4605893f1e..d9bd786ce23d 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -69,20 +69,31 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, { #ifdef CONFIG_ARM_UNWIND Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + struct arm_unwind_mapping *maps = mod->arch.map; for (s = sechdrs; s < sechdrs_end; s++) { - if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0) - mod->arch.unw_sec_init = s; - else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0) - mod->arch.unw_sec_devinit = s; - else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0) - mod->arch.unw_sec_core = s; - else if (strcmp(".init.text", secstrings + s->sh_name) == 0) - mod->arch.sec_init_text = s; - else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0) - mod->arch.sec_devinit_text = s; - else if (strcmp(".text", secstrings + s->sh_name) == 0) - mod->arch.sec_core_text = s; + char const *secname = secstrings + s->sh_name; + + if (strcmp(".ARM.exidx.init.text", secname) == 0) + maps[ARM_SEC_INIT].unw_sec = s; + else if (strcmp(".ARM.exidx.devinit.text", secname) == 0) + maps[ARM_SEC_DEVINIT].unw_sec = s; + else if (strcmp(".ARM.exidx", secname) == 0) + maps[ARM_SEC_CORE].unw_sec = s; + else if (strcmp(".ARM.exidx.exit.text", secname) == 0) + maps[ARM_SEC_EXIT].unw_sec = s; + else if (strcmp(".ARM.exidx.devexit.text", secname) == 0) + maps[ARM_SEC_DEVEXIT].unw_sec = s; + else if (strcmp(".init.text", secname) == 0) + maps[ARM_SEC_INIT].sec_text = s; + else if (strcmp(".devinit.text", secname) == 0) + maps[ARM_SEC_DEVINIT].sec_text = s; + else if (strcmp(".text", secname) == 0) + maps[ARM_SEC_CORE].sec_text = s; + else if (strcmp(".exit.text", secname) == 0) + maps[ARM_SEC_EXIT].sec_text = s; + else if (strcmp(".devexit.text", secname) == 0) + maps[ARM_SEC_DEVEXIT].sec_text = s; } #endif return 0; @@ -292,31 +303,22 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, #ifdef CONFIG_ARM_UNWIND static void register_unwind_tables(struct module *mod) { - if (mod->arch.unw_sec_init && mod->arch.sec_init_text) - mod->arch.unwind_init = - unwind_table_add(mod->arch.unw_sec_init->sh_addr, - mod->arch.unw_sec_init->sh_size, - mod->arch.sec_init_text->sh_addr, - mod->arch.sec_init_text->sh_size); - if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text) - mod->arch.unwind_devinit = - unwind_table_add(mod->arch.unw_sec_devinit->sh_addr, - mod->arch.unw_sec_devinit->sh_size, - mod->arch.sec_devinit_text->sh_addr, - mod->arch.sec_devinit_text->sh_size); - if (mod->arch.unw_sec_core && mod->arch.sec_core_text) - mod->arch.unwind_core = - unwind_table_add(mod->arch.unw_sec_core->sh_addr, - mod->arch.unw_sec_core->sh_size, - mod->arch.sec_core_text->sh_addr, - mod->arch.sec_core_text->sh_size); + int i; + for (i = 0; i < ARM_SEC_MAX; ++i) { + struct arm_unwind_mapping *map = &mod->arch.map[i]; + if (map->unw_sec && map->sec_text) + map->unwind = unwind_table_add(map->unw_sec->sh_addr, + map->unw_sec->sh_size, + map->sec_text->sh_addr, + map->sec_text->sh_size); + } } static void unregister_unwind_tables(struct module *mod) { - unwind_table_del(mod->arch.unwind_init); - unwind_table_del(mod->arch.unwind_devinit); - unwind_table_del(mod->arch.unwind_core); + int i = ARM_SEC_MAX; + while (--i >= 0) + unwind_table_del(mod->arch.map[i].unwind); } #else static inline void register_unwind_tables(struct module *mod) { } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 401e38be1f78..e76fcaadce03 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -29,6 +29,7 @@ #include <linux/utsname.h> #include <linux/uaccess.h> #include <linux/random.h> +#include <linux/hw_breakpoint.h> #include <asm/cacheflush.h> #include <asm/leds.h> @@ -135,6 +136,25 @@ EXPORT_SYMBOL(pm_power_off); void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart; EXPORT_SYMBOL_GPL(arm_pm_restart); +static void do_nothing(void *unused) +{ +} + +/* + * cpu_idle_wait - Used to ensure that all the CPUs discard old value of + * pm_idle and update to new pm_idle value. Required while changing pm_idle + * handler on SMP systems. + * + * Caller must have changed pm_idle to the new value before the call. Old + * pm_idle value will not be used by any CPU after the return of this function. + */ +void cpu_idle_wait(void) +{ + smp_mb(); + /* kick all the CPUs so that they exit out of pm_idle */ + smp_call_function(do_nothing, NULL, 1); +} +EXPORT_SYMBOL_GPL(cpu_idle_wait); /* * This is our default idle handler. We need to disable @@ -317,6 +337,8 @@ void flush_thread(void) struct thread_info *thread = current_thread_info(); struct task_struct *tsk = current; + flush_ptrace_hw_breakpoint(tsk); + memset(thread->used_cp, 0, sizeof(thread->used_cp)); memset(&tsk->thread.debug, 0, sizeof(struct debug_info)); memset(&thread->fpstate, 0, sizeof(union fp_state)); @@ -345,6 +367,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, thread->cpu_context.sp = (unsigned long)childregs; thread->cpu_context.pc = (unsigned long)ret_from_fork; + clear_ptrace_hw_breakpoint(p); + if (clone_flags & CLONE_SETTLS) thread->tp_value = regs->ARM_r3; @@ -458,3 +482,24 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) unsigned long range_end = mm->brk + 0x02000000; return randomize_range(mm->brk, range_end, 0) ? : mm->brk; } + +/* + * The vectors page is always readable from user space for the + * atomic helpers and the signal restart code. Let's declare a mapping + * for it so it is visible through ptrace and /proc/<pid>/mem. + */ + +int vectors_user_mapping(void) +{ + struct mm_struct *mm = current->mm; + return install_special_mapping(mm, 0xffff0000, PAGE_SIZE, + VM_READ | VM_EXEC | + VM_MAYREAD | VM_MAYEXEC | + VM_ALWAYSDUMP | VM_RESERVED, + NULL); +} + +const char *arch_vma_name(struct vm_area_struct *vma) +{ + return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL; +} diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index f99d489822d5..e0cb6370ed14 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -19,6 +19,8 @@ #include <linux/init.h> #include <linux/signal.h> #include <linux/uaccess.h> +#include <linux/perf_event.h> +#include <linux/hw_breakpoint.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -847,6 +849,232 @@ static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data) } #endif +#ifdef CONFIG_HAVE_HW_BREAKPOINT +/* + * Convert a virtual register number into an index for a thread_info + * breakpoint array. Breakpoints are identified using positive numbers + * whilst watchpoints are negative. The registers are laid out as pairs + * of (address, control), each pair mapping to a unique hw_breakpoint struct. + * Register 0 is reserved for describing resource information. + */ +static int ptrace_hbp_num_to_idx(long num) +{ + if (num < 0) + num = (ARM_MAX_BRP << 1) - num; + return (num - 1) >> 1; +} + +/* + * Returns the virtual register number for the address of the + * breakpoint at index idx. + */ +static long ptrace_hbp_idx_to_num(int idx) +{ + long mid = ARM_MAX_BRP << 1; + long num = (idx << 1) + 1; + return num > mid ? mid - num : num; +} + +/* + * Handle hitting a HW-breakpoint. + */ +static void ptrace_hbptriggered(struct perf_event *bp, int unused, + struct perf_sample_data *data, + struct pt_regs *regs) +{ + struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp); + long num; + int i; + siginfo_t info; + + for (i = 0; i < ARM_MAX_HBP_SLOTS; ++i) + if (current->thread.debug.hbp[i] == bp) + break; + + num = (i == ARM_MAX_HBP_SLOTS) ? 0 : ptrace_hbp_idx_to_num(i); + + info.si_signo = SIGTRAP; + info.si_errno = (int)num; + info.si_code = TRAP_HWBKPT; + info.si_addr = (void __user *)(bkpt->trigger); + + force_sig_info(SIGTRAP, &info, current); +} + +/* + * Set ptrace breakpoint pointers to zero for this task. + * This is required in order to prevent child processes from unregistering + * breakpoints held by their parent. + */ +void clear_ptrace_hw_breakpoint(struct task_struct *tsk) +{ + memset(tsk->thread.debug.hbp, 0, sizeof(tsk->thread.debug.hbp)); +} + +/* + * Unregister breakpoints from this task and reset the pointers in + * the thread_struct. + */ +void flush_ptrace_hw_breakpoint(struct task_struct *tsk) +{ + int i; + struct thread_struct *t = &tsk->thread; + + for (i = 0; i < ARM_MAX_HBP_SLOTS; i++) { + if (t->debug.hbp[i]) { + unregister_hw_breakpoint(t->debug.hbp[i]); + t->debug.hbp[i] = NULL; + } + } +} + +static u32 ptrace_get_hbp_resource_info(void) +{ + u8 num_brps, num_wrps, debug_arch, wp_len; + u32 reg = 0; + + num_brps = hw_breakpoint_slots(TYPE_INST); + num_wrps = hw_breakpoint_slots(TYPE_DATA); + debug_arch = arch_get_debug_arch(); + wp_len = arch_get_max_wp_len(); + + reg |= debug_arch; + reg <<= 8; + reg |= wp_len; + reg <<= 8; + reg |= num_wrps; + reg <<= 8; + reg |= num_brps; + + return reg; +} + +static struct perf_event *ptrace_hbp_create(struct task_struct *tsk, int type) +{ + struct perf_event_attr attr; + + ptrace_breakpoint_init(&attr); + + /* Initialise fields to sane defaults. */ + attr.bp_addr = 0; + attr.bp_len = HW_BREAKPOINT_LEN_4; + attr.bp_type = type; + attr.disabled = 1; + + return register_user_hw_breakpoint(&attr, ptrace_hbptriggered, tsk); +} + +static int ptrace_gethbpregs(struct task_struct *tsk, long num, + unsigned long __user *data) +{ + u32 reg; + int idx, ret = 0; + struct perf_event *bp; + struct arch_hw_breakpoint_ctrl arch_ctrl; + + if (num == 0) { + reg = ptrace_get_hbp_resource_info(); + } else { + idx = ptrace_hbp_num_to_idx(num); + if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) { + ret = -EINVAL; + goto out; + } + + bp = tsk->thread.debug.hbp[idx]; + if (!bp) { + reg = 0; + goto put; + } + + arch_ctrl = counter_arch_bp(bp)->ctrl; + + /* + * Fix up the len because we may have adjusted it + * to compensate for an unaligned address. + */ + while (!(arch_ctrl.len & 0x1)) + arch_ctrl.len >>= 1; + + if (idx & 0x1) + reg = encode_ctrl_reg(arch_ctrl); + else + reg = bp->attr.bp_addr; + } + +put: + if (put_user(reg, data)) + ret = -EFAULT; + +out: + return ret; +} + +static int ptrace_sethbpregs(struct task_struct *tsk, long num, + unsigned long __user *data) +{ + int idx, gen_len, gen_type, implied_type, ret = 0; + u32 user_val; + struct perf_event *bp; + struct arch_hw_breakpoint_ctrl ctrl; + struct perf_event_attr attr; + + if (num == 0) + goto out; + else if (num < 0) + implied_type = HW_BREAKPOINT_RW; + else + implied_type = HW_BREAKPOINT_X; + + idx = ptrace_hbp_num_to_idx(num); + if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) { + ret = -EINVAL; + goto out; + } + + if (get_user(user_val, data)) { + ret = -EFAULT; + goto out; + } + + bp = tsk->thread.debug.hbp[idx]; + if (!bp) { + bp = ptrace_hbp_create(tsk, implied_type); + if (IS_ERR(bp)) { + ret = PTR_ERR(bp); + goto out; + } + tsk->thread.debug.hbp[idx] = bp; + } + + attr = bp->attr; + + if (num & 0x1) { + /* Address */ + attr.bp_addr = user_val; + } else { + /* Control */ + decode_ctrl_reg(user_val, &ctrl); + ret = arch_bp_generic_fields(ctrl, &gen_len, &gen_type); + if (ret) + goto out; + + if ((gen_type & implied_type) != gen_type) { + ret = -EINVAL; + goto out; + } + + attr.bp_len = gen_len; + attr.bp_type = gen_type; + attr.disabled = !ctrl.enabled; + } + + ret = modify_user_hw_breakpoint(bp, &attr); +out: + return ret; +} +#endif + long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; @@ -916,6 +1144,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; #endif +#ifdef CONFIG_HAVE_HW_BREAKPOINT + case PTRACE_GETHBPREGS: + ret = ptrace_gethbpregs(child, addr, + (unsigned long __user *)data); + break; + case PTRACE_SETHBPREGS: + ret = ptrace_sethbpregs(child, addr, + (unsigned long __user *)data); + break; +#endif + default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index d5231ae7355a..336f14e0e5c2 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -36,6 +36,7 @@ #include <asm/procinfo.h> #include <asm/sections.h> #include <asm/setup.h> +#include <asm/smp_plat.h> #include <asm/mach-types.h> #include <asm/cacheflush.h> #include <asm/cachetype.h> @@ -238,6 +239,35 @@ int cpu_architecture(void) return cpu_arch; } +static int cpu_has_aliasing_icache(unsigned int arch) +{ + int aliasing_icache; + unsigned int id_reg, num_sets, line_size; + + /* arch specifies the register format */ + switch (arch) { + case CPU_ARCH_ARMv7: + asm("mcr p15, 2, %0, c0, c0, 0 @ set CSSELR" + : /* No output operands */ + : "r" (1)); + isb(); + asm("mrc p15, 1, %0, c0, c0, 0 @ read CCSIDR" + : "=r" (id_reg)); + line_size = 4 << ((id_reg & 0x7) + 2); + num_sets = ((id_reg >> 13) & 0x7fff) + 1; + aliasing_icache = (line_size * num_sets) > PAGE_SIZE; + break; + case CPU_ARCH_ARMv6: + aliasing_icache = read_cpuid_cachetype() & (1 << 11); + break; + default: + /* I-cache aliases will be handled by D-cache aliasing code */ + aliasing_icache = 0; + } + + return aliasing_icache; +} + static void __init cacheid_init(void) { unsigned int cachetype = read_cpuid_cachetype(); @@ -249,10 +279,15 @@ static void __init cacheid_init(void) cacheid = CACHEID_VIPT_NONALIASING; if ((cachetype & (3 << 14)) == 1 << 14) cacheid |= CACHEID_ASID_TAGGED; - } else if (cachetype & (1 << 23)) + else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7)) + cacheid |= CACHEID_VIPT_I_ALIASING; + } else if (cachetype & (1 << 23)) { cacheid = CACHEID_VIPT_ALIASING; - else + } else { cacheid = CACHEID_VIPT_NONALIASING; + if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6)) + cacheid |= CACHEID_VIPT_I_ALIASING; + } } else { cacheid = CACHEID_VIVT; } @@ -263,7 +298,7 @@ static void __init cacheid_init(void) cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown", cache_is_vivt() ? "VIVT" : icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" : - cache_is_vipt_aliasing() ? "VIPT aliasing" : + icache_is_vipt_aliasing() ? "VIPT aliasing" : cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown"); } @@ -490,7 +525,7 @@ request_standard_resources(struct meminfo *mi, struct machine_desc *mdesc) kernel_code.start = virt_to_phys(_text); kernel_code.end = virt_to_phys(_etext - 1); - kernel_data.start = virt_to_phys(_data); + kernel_data.start = virt_to_phys(_sdata); kernel_data.end = virt_to_phys(_end - 1); for (i = 0; i < mi->nr_banks; i++) { @@ -825,7 +860,8 @@ void __init setup_arch(char **cmdline_p) request_standard_resources(&meminfo, mdesc); #ifdef CONFIG_SMP - smp_init_cpus(); + if (is_smp()) + smp_init_cpus(); #endif reserve_crashkernel(); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 40dc74f2b27f..8c1959590252 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -33,6 +33,7 @@ #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/processor.h> +#include <asm/sections.h> #include <asm/tlbflush.h> #include <asm/ptrace.h> #include <asm/localtimer.h> @@ -67,12 +68,47 @@ enum ipi_msg_type { IPI_CPU_STOP, }; +static inline void identity_mapping_add(pgd_t *pgd, unsigned long start, + unsigned long end) +{ + unsigned long addr, prot; + pmd_t *pmd; + + prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE; + if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) + prot |= PMD_BIT4; + + for (addr = start & PGDIR_MASK; addr < end;) { + pmd = pmd_offset(pgd + pgd_index(addr), addr); + pmd[0] = __pmd(addr | prot); + addr += SECTION_SIZE; + pmd[1] = __pmd(addr | prot); + addr += SECTION_SIZE; + flush_pmd_entry(pmd); + outer_clean_range(__pa(pmd), __pa(pmd + 1)); + } +} + +static inline void identity_mapping_del(pgd_t *pgd, unsigned long start, + unsigned long end) +{ + unsigned long addr; + pmd_t *pmd; + + for (addr = start & PGDIR_MASK; addr < end; addr += PGDIR_SIZE) { + pmd = pmd_offset(pgd + pgd_index(addr), addr); + pmd[0] = __pmd(0); + pmd[1] = __pmd(0); + clean_pmd_entry(pmd); + outer_clean_range(__pa(pmd), __pa(pmd + 1)); + } +} + int __cpuinit __cpu_up(unsigned int cpu) { struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu); struct task_struct *idle = ci->idle; pgd_t *pgd; - pmd_t *pmd; int ret; /* @@ -101,11 +137,16 @@ int __cpuinit __cpu_up(unsigned int cpu) * a 1:1 mapping for the physical address of the kernel. */ pgd = pgd_alloc(&init_mm); - pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET); - *pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) | - PMD_TYPE_SECT | PMD_SECT_AP_WRITE); - flush_pmd_entry(pmd); - outer_clean_range(__pa(pmd), __pa(pmd + 1)); + if (!pgd) + return -ENOMEM; + + if (PHYS_OFFSET != PAGE_OFFSET) { +#ifndef CONFIG_HOTPLUG_CPU + identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end)); +#endif + identity_mapping_add(pgd, __pa(_stext), __pa(_etext)); + identity_mapping_add(pgd, __pa(_sdata), __pa(_edata)); + } /* * We need to tell the secondary core where to find @@ -143,8 +184,14 @@ int __cpuinit __cpu_up(unsigned int cpu) secondary_data.stack = NULL; secondary_data.pgdir = 0; - *pmd = __pmd(0); - clean_pmd_entry(pmd); + if (PHYS_OFFSET != PAGE_OFFSET) { +#ifndef CONFIG_HOTPLUG_CPU + identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end)); +#endif + identity_mapping_del(pgd, __pa(_stext), __pa(_etext)); + identity_mapping_del(pgd, __pa(_sdata), __pa(_edata)); + } + pgd_free(&init_mm, pgd); if (ret) { @@ -567,7 +614,8 @@ void smp_send_stop(void) { cpumask_t mask = cpu_online_map; cpu_clear(smp_processor_id(), mask); - send_ipi_message(&mask, IPI_CPU_STOP); + if (!cpus_empty(mask)) + send_ipi_message(&mask, IPI_CPU_STOP); } /* diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index dd81a918c106..2a161765f6d5 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -146,6 +146,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr) addr < table->end_addr) { idx = search_index(addr, table->start, table->stop - 1); + /* Move-to-front to exploit common traces */ + list_move(&table->list, &unwind_tables); break; } } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index b16c07914b55..1953e3d21abf 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -8,6 +8,19 @@ #include <asm/memory.h> #include <asm/page.h> +#define PROC_INFO \ + VMLINUX_SYMBOL(__proc_info_begin) = .; \ + *(.proc.info.init) \ + VMLINUX_SYMBOL(__proc_info_end) = .; + +#ifdef CONFIG_HOTPLUG_CPU +#define ARM_CPU_DISCARD(x) +#define ARM_CPU_KEEP(x) x +#else +#define ARM_CPU_DISCARD(x) x +#define ARM_CPU_KEEP(x) +#endif + OUTPUT_ARCH(arm) ENTRY(stext) @@ -31,15 +44,18 @@ SECTIONS HEAD_TEXT INIT_TEXT _einittext = .; - __proc_info_begin = .; - *(.proc.info.init) - __proc_info_end = .; + ARM_CPU_DISCARD(PROC_INFO) __arch_info_begin = .; *(.arch.info.init) __arch_info_end = .; __tagtable_begin = .; *(.taglist.init) __tagtable_end = .; +#ifdef CONFIG_SMP_ON_UP + __smpalt_begin = .; + *(.alt.smp.init) + __smpalt_end = .; +#endif INIT_SETUP(16) @@ -68,10 +84,8 @@ SECTIONS /DISCARD/ : { *(.ARM.exidx.exit.text) *(.ARM.extab.exit.text) -#ifndef CONFIG_HOTPLUG_CPU - *(.ARM.exidx.cpuexit.text) - *(.ARM.extab.cpuexit.text) -#endif + ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) + ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -100,12 +114,11 @@ SECTIONS *(.glue_7) *(.glue_7t) *(.got) /* Global offset table */ + ARM_CPU_KEEP(PROC_INFO) } RO_DATA(PAGE_SIZE) - _etext = .; /* End of text and rodata section */ - #ifdef CONFIG_ARM_UNWIND /* * Stack unwinding tables @@ -123,6 +136,8 @@ SECTIONS } #endif + _etext = .; /* End of text and rodata section */ + #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ . = PAGE_OFFSET + TEXT_OFFSET; @@ -237,6 +252,12 @@ SECTIONS /* Default discards */ DISCARDS + +#ifndef CONFIG_SMP_ON_UP + /DISCARD/ : { + *(.alt.smp.init) + } +#endif } /* diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index 81a3ecc0d104..0eb3e3e5b2d1 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -95,8 +95,6 @@ static void __init aaed2000_map_io(void) MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") /* Maintainer: Nicolas Bellido Y Ortega */ - .phys_io = PIO_BASE, - .io_pg_offst = ((VIO_BASE) >> 18) & 0xfffc, .map_io = aaed2000_map_io, .init_irq = aaed2000_init_irq, .timer = &aaec2000_timer, diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S index a9cac368bfe6..bc7ad5561c4c 100644 --- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S +++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S @@ -10,12 +10,10 @@ */ #include "hardware.h" - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical - movne \rx, #io_p2v(0x80000000) @ virtual - orr \rx, \rx, #0x00000800 + .macro addruart, rp, rv + mov \rp, 0x00000800 + orr \rv, \rp, #io_p2v(0x80000000) @ virtual + orr \rp, \rp, #0x80000000 @ physical .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h index 551f68f666bf..cff4e0a996ce 100644 --- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h +++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h @@ -11,6 +11,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 939bccd70569..851e8139ef9d 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -33,6 +33,7 @@ config ARCH_AT91SAM9260 select HAVE_AT91_USART3 select HAVE_AT91_USART4 select HAVE_AT91_USART5 + select HAVE_NET_MACB config ARCH_AT91SAM9261 bool "AT91SAM9261" @@ -51,6 +52,7 @@ config ARCH_AT91SAM9263 select CPU_ARM926T select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL + select HAVE_NET_MACB config ARCH_AT91SAM9RL bool "AT91SAM9RL" @@ -66,6 +68,7 @@ config ARCH_AT91SAM9G20 select HAVE_AT91_USART3 select HAVE_AT91_USART4 select HAVE_AT91_USART5 + select HAVE_NET_MACB config ARCH_AT91SAM9G45 bool "AT91SAM9G45" @@ -73,6 +76,7 @@ config ARCH_AT91SAM9G45 select GENERIC_CLOCKEVENTS select HAVE_AT91_USART3 select HAVE_FB_ATMEL + select HAVE_NET_MACB config ARCH_AT91CAP9 bool "AT91CAP9" @@ -248,6 +252,12 @@ config MACH_CPU9260 Select this if you are using a Eukrea Electromatique's CPU9260 Board <http://www.eukrea.com/> +config MACH_FLEXIBITY + bool "Flexibity Connect board" + help + Select this if you are using Flexibity Connect board + <http://www.flexibity.com> + endif # ---------------------------------------------------------- @@ -338,6 +348,7 @@ config MACH_AT91SAM9G20EK that embeds only one SD/MMC slot. config MACH_AT91SAM9G20EK_2MMC + depends on MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" select HAVE_NAND_ATMEL_BUSWIDTH_16 help @@ -383,8 +394,8 @@ if ARCH_AT91SAM9G45 comment "AT91SAM9G45 Board Type" -config MACH_AT91SAM9G45EKES - bool "Atmel AT91SAM9G45-EKES Evaluation Kit" +config MACH_AT91SAM9M10G45EK + bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index ca2ac003f41f..412b3a471a4b 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o +obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o # AT91SAM9261 board-specific support obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o @@ -61,7 +62,6 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o # AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o -obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o @@ -70,7 +70,7 @@ obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o # AT91SAM9G45 board-specific support -obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o +obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 9b27d167bff0..46bdc82d3fbf 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -92,8 +92,6 @@ static void __init onearm_board_init(void) MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = onearm_map_io, diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 50667bed7cc9..cba7f7771fee 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -218,8 +218,6 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = afeb9260_map_io, diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c index 5daff277f53e..3929f1c9e4e5 100644 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ b/arch/arm/mach-at91/board-at572d940hf_ek.c @@ -216,7 +216,7 @@ static struct atmel_nand_data __initdata eb_nand_data = { /* .rdy_pin = AT91_PIN_PC16, */ .enable_pin = AT91_PIN_PA15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, @@ -318,8 +318,6 @@ static void __init eb_board_init(void) MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") /* Maintainer: Atmel <costa.antonior@gmail.com> */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = eb_map_io, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 44eb9f764938..b54e3e6fceb6 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -198,8 +198,6 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = cam60_map_io, diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index d6940870e403..e7274440ead9 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -399,8 +399,6 @@ static void __init cap9adk_board_init(void) MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = cap9adk_map_io, diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index db1f9544d2e0..2e74a19874d1 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -162,8 +162,6 @@ static void __init carmeva_board_init(void) MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = carmeva_map_io, diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 4bc2e9f6ebb5..3838594578f3 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -375,8 +375,6 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260") MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = cpu9krea_map_io, diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index a28d99656190..2f4dd8cdd484 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -175,8 +175,6 @@ static void __init cpuat91_board_init(void) MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = cpuat91_map_io, diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index fea2529ebcf9..464839dc39bd 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -257,8 +257,6 @@ static void __init csb337_board_init(void) MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = csb337_map_io, diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index cfa3f04b2205..431688c61412 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -138,8 +138,6 @@ static void __init csb637_board_init(void) MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = csb637_map_io, diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index 0fd0f5bc77ea..e14f0e165680 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -225,8 +225,6 @@ static void __init dk_board_init(void) MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = dk_map_io, diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 528656761ff7..6cf6566ae346 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -120,8 +120,6 @@ static void __init eb9200_board_init(void) } MACHINE_START(ATEB9200, "Embest ATEB9200") - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = eb9200_map_io, diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 1d69908617f0..7b58c948a957 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -168,8 +168,6 @@ static void __init ecb_at91board_init(void) MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = ecb_at91map_io, diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 295a96609e71..a158a0ce458f 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -148,8 +148,6 @@ static void __init eco920_board_init(void) MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = eco920_map_io, diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c index 4cdfaac8e590..56e92c4bbc2a 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-ek.c @@ -191,8 +191,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = ek_map_io, diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c new file mode 100644 index 000000000000..c8a62dc8fa65 --- /dev/null +++ b/arch/arm/mach-at91/board-flexibity.c @@ -0,0 +1,162 @@ +/* + * linux/arch/arm/mach-at91/board-flexibity.c + * + * Copyright (C) 2010 Flexibity + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/input.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/board.h> + +#include "generic.h" + +static void __init flexibity_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init flexibity_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + +/* USB Host port */ +static struct at91_usbh_data __initdata flexibity_usbh_data = { + .ports = 2, +}; + +/* USB Device port */ +static struct at91_udc_data __initdata flexibity_udc_data = { + .vbus_pin = AT91_PIN_PC5, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + +/* SPI devices */ +static struct spi_board_info flexibity_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 1, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +}; + +/* MCI (SD/MMC) */ +static struct at91_mmc_data __initdata flexibity_mmc_data = { + .slot_b = 0, + .wire4 = 1, + .det_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, +}; + +/* LEDs */ +static struct gpio_led flexibity_leds[] = { + { + .name = "usb1:green", + .gpio = AT91_PIN_PA12, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb1:red", + .gpio = AT91_PIN_PA13, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb2:green", + .gpio = AT91_PIN_PB26, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb2:red", + .gpio = AT91_PIN_PB27, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb3:green", + .gpio = AT91_PIN_PC8, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb3:red", + .gpio = AT91_PIN_PC6, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb4:green", + .gpio = AT91_PIN_PB4, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb4:red", + .gpio = AT91_PIN_PB5, + .active_low = 1, + .default_trigger = "default-on", + } +}; + +static void __init flexibity_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&flexibity_usbh_data); + /* USB Device */ + at91_add_device_udc(&flexibity_udc_data); + /* SPI */ + at91_add_device_spi(flexibity_spi_devices, + ARRAY_SIZE(flexibity_spi_devices)); + /* MMC */ + at91_add_device_mmc(0, &flexibity_mmc_data); + /* LEDs */ + at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds)); +} + +MACHINE_START(FLEXIBITY, "Flexibity Connect") + /* Maintainer: Maxim Osipov */ + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = flexibity_map_io, + .init_irq = flexibity_init_irq, + .init_machine = flexibity_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index a87956c0a74f..c0ce79d431a0 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -99,8 +99,6 @@ static void __init kafa_board_init(void) MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = kafa_map_io, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index fe9b9913fa3c..a13d2063faff 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -136,8 +136,6 @@ static void __init kb9202_board_init(void) MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = kb9202_map_io, diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 7c1e382330fb..fe5f1d47e6e2 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -387,8 +387,6 @@ static void __init neocore926_board_init(void) MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = neocore926_map_io, diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 859727e7ea30..9d833bbc592d 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -156,8 +156,6 @@ static void __init picotux200_board_init(void) MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = picotux200_map_io, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 664938e8f661..69d15a875b66 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -268,8 +268,6 @@ static void __init ek_board_init(void) MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = ek_map_io, diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index b48346977534..25a26beaa728 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -212,8 +212,6 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = ek_map_io, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index ba9d501b5c50..de1816e0e1d9 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -356,8 +356,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = ek_map_io, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 65eb0943194f..14acc901e24c 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -623,8 +623,6 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") #endif /* Maintainer: Atmel */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = ek_map_io, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 2d867fb0630f..bfe490df58be 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -454,8 +454,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = ek_map_io, diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c deleted file mode 100644 index c49f5c003ee1..000000000000 --- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * Copyright (C) 2005 SAN People - * Copyright (C) 2008 Atmel - * Copyright (C) 2009 Rob Emanuele - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/at73c213.h> -#include <linux/clk.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/consumer.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at91sam9_smc.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init ek_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); - - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/* - * SPI devices. - */ -static struct spi_board_info ek_spi_devices[] = { -#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91)) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct at91_eth_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PB0, - .is_rmii = 1, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Bootstrap", - .offset = 0, - .size = 4 * SZ_1M, - }, - { - .name = "Partition 1", - .offset = MTDPART_OFS_NXTBLK, - .size = 60 * SZ_1M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - -/* det_pin is not connected */ -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 3, -}; - -static void __init ek_add_device_nand(void) -{ - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * MCI (SD/MMC) - * wp_pin is not connected - */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) -static struct mci_platform_data __initdata ek_mmc_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PC2, - .wp_pin = -ENODEV, - }, - .slot[1] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PC9, - .wp_pin = -ENODEV, - }, - -}; -#else -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, /* Only one slot so use slot B */ - .wire4 = 1, - .det_pin = AT91_PIN_PC9, -}; -#endif - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* "bottom" led, green, userled1 to be defined */ - .name = "ds5", - .gpio = AT91_PIN_PB8, - .active_low = 1, - .default_trigger = "none", - }, - { /* "power" led, yellow */ - .name = "ds1", - .gpio = AT91_PIN_PB9, - .default_trigger = "heartbeat", - } -}; - -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) -static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { - REGULATOR_SUPPLY("AVDD", "0-001b"), - REGULATOR_SUPPLY("HPVDD", "0-001b"), - REGULATOR_SUPPLY("DBVDD", "0-001b"), - REGULATOR_SUPPLY("DCVDD", "0-001b"), -}; - -static struct regulator_init_data ek_avdd_reg_init_data = { - .constraints = { - .name = "3V3", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .consumer_supplies = ek_audio_consumer_supplies, - .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies), -}; - -static struct fixed_voltage_config ek_vdd_pdata = { - .supply_name = "board-3V3", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 0, - .init_data = &ek_avdd_reg_init_data, -}; -static struct platform_device ek_voltage_regulator = { - .name = "reg-fixed-voltage", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_vdd_pdata, - }, -}; -static void __init ek_add_regulators(void) -{ - platform_device_register(&ek_voltage_regulator); -} -#else -static void __init ek_add_regulators(void) {} -#endif - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("24c512", 0x50), - }, -}; - - -static void __init ek_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* NAND */ - ek_add_device_nand(); - /* Ethernet */ - at91_add_device_eth(&ek_macb_data); - /* Regulators */ - ek_add_regulators(); - /* MMC */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) - at91_add_device_mci(0, &ek_mmc_data); -#else - at91_add_device_mmc(0, &ek_mmc_data); -#endif - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* PCK0 provides MCLK to the WM8731 */ - at91_set_B_periph(AT91_PIN_PC1, 0); - /* SSC (for WM8731) */ - at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); -} - -MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") - /* Maintainer: Rob Emanuele */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91sam926x_timer, - .map_io = ek_map_io, - .init_irq = ek_init_irq, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 6ea9808b8868..ca8198b3c168 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -47,6 +47,18 @@ #include "sam9_smc.h" #include "generic.h" +/* + * board revision encoding + * bit 0: + * 0 => 1 sd/mmc slot + * 1 => 2 sd/mmc slots connectors (board from revision C) + */ +#define HAVE_2MMC (1 << 0) +static int inline ek_have_2mmc(void) +{ + return machine_is_at91sam9g20ek_2mmc() || (system_rev & HAVE_2MMC); +} + static void __init ek_map_io(void) { @@ -94,7 +106,7 @@ static struct at91_udc_data __initdata ek_udc_data = { * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) +#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91)) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -121,6 +133,13 @@ static struct at91_eth_data __initdata ek_macb_data = { .is_rmii = 1, }; +static void __init ek_add_device_macb(void) +{ + if (ek_have_2mmc()) + ek_macb_data.phy_irq_pin = AT91_PIN_PB0; + + at91_add_device_eth(&ek_macb_data); +} /* * NAND flash @@ -198,13 +217,36 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) - * det_pin, wp_pin and vcc_pin are not connected + * wp_pin and vcc_pin are not connected */ +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) +static struct mci_platform_data __initdata ek_mmc_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC9, + }, + +}; +#else static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, + .slot_b = 1, /* Only one slot so use slot B */ .wire4 = 1, + .det_pin = AT91_PIN_PC9, }; +#endif +static void __init ek_add_device_mmc(void) +{ +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) + if (ek_have_2mmc()) { + ek_mmc_data.slot[0].bus_width = 4; + ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2; + } + at91_add_device_mci(0, &ek_mmc_data); +#else + at91_add_device_mmc(0, &ek_mmc_data); +#endif +} /* * LEDs @@ -223,6 +265,15 @@ static struct gpio_led ek_leds[] = { } }; +static void __init ek_add_device_gpio_leds(void) +{ + if (ek_have_2mmc()) { + ek_leds[0].gpio = AT91_PIN_PB8; + ek_leds[1].gpio = AT91_PIN_PB9; + } + + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); +} /* * GPIO Buttons @@ -336,15 +387,15 @@ static void __init ek_board_init(void) /* NAND */ ek_add_device_nand(); /* Ethernet */ - at91_add_device_eth(&ek_macb_data); + ek_add_device_macb(); /* Regulators */ ek_add_regulators(); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + ek_add_device_mmc(); /* I2C */ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + ek_add_device_gpio_leds(); /* Push Buttons */ ek_add_device_buttons(); /* PCK0 provides MCLK to the WM8731 */ @@ -355,8 +406,15 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = ek_map_io, + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END + +MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") + /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = ek_map_io, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ee800595594d..7913984f6de9 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -135,7 +135,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, @@ -399,10 +399,8 @@ static void __init ek_board_init(void) at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led)); } -MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES") +MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = ek_map_io, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 7ac20f3a2067..3bf3408e94c1 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -329,8 +329,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = ek_map_io, diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 2c08ae4ad3a1..0a99b3cedd7a 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -177,8 +177,6 @@ static void __init snapper9260_board_init(void) } MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = snapper9260_map_io, diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 87958274290f..5206eef4a67e 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -294,8 +294,6 @@ static void __init stamp9g20_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = portuxg20_map_io, @@ -305,8 +303,6 @@ MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = stamp9g20_map_io, diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 905d6ef76807..07784baeae84 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -228,8 +228,6 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = ek_map_io, diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index b6a3480383e5..b614508931fd 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -244,8 +244,6 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = ek_map_io, diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index e22bf051f835..89df00a9d2f7 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -594,8 +594,6 @@ static void __init yl9200_board_init(void) MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = yl9200_map_io, diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index d34cdb8abdca..063ac44a0204 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -52,4 +52,10 @@ #define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */ #define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */ +/* + * Support defines for the simple Power Controller module. + */ +#define AT91_PS_CR (AT91_PS + 0) /* PS Control register */ +#define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */ + #endif /* AT91X40_H */ diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index 9e750a1c1b5a..0f959faf74a9 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -14,11 +14,9 @@ #include <mach/hardware.h> #include <mach/at91_dbgu.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) - ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) + .macro addruart, rp, rv + ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) + ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h index ee8db152592e..36af14bc13bb 100644 --- a/arch/arm/mach-at91/include/mach/system.h +++ b/arch/arm/mach-at91/include/mach/system.h @@ -32,7 +32,11 @@ static inline void arch_idle(void) * Disable the processor clock. The processor will be automatically * re-enabled by an interrupt or by a reset. */ +#ifdef AT91_PS + at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU); +#else at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); +#endif #ifndef CONFIG_CPU_ARM920T /* * Set the processor (CP15) into 'Wait for Interrupt' mode. diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 2f139196d63d..73eb066d2329 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -167,8 +167,6 @@ static void __init bcmring_fixup(struct machine_desc *desc, MACHINE_START(BCMRING, "BCMRING") /* Maintainer: Broadcom Corporation */ - .phys_io = MM_IO_START, - .io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc, .fixup = bcmring_fixup, .map_io = bcmring_map_io, .init_irq = bcmring_init_irq, diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h index 35e2ead8395c..3db3a09fd398 100644 --- a/arch/arm/mach-bcmring/include/mach/vmalloc.h +++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h @@ -22,4 +22,4 @@ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles * larger physical memory designs better. */ -#define VMALLOC_END (PAGE_OFFSET + 0x30000000) +#define VMALLOC_END 0xf0000000 diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index 5f18eccdc725..4a74b2c959bd 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -64,8 +64,6 @@ void __init autcpu12_map_io(void) MACHINE_START(AUTCPU12, "autronix autcpu12") /* Maintainer: Thomas Gleixner */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, .boot_params = 0xc0020000, .map_io = autcpu12_map_io, .init_irq = clps711x_init_irq, diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index 71a80b5b8ad6..5a1689d48793 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -55,8 +55,6 @@ static void __init cdb89712_map_io(void) MACHINE_START(CDB89712, "Cirrus-CDB89712") /* Maintainer: Ray Lehtiniemi */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .map_io = cdb89712_map_io, .init_irq = clps711x_init_irq, diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c index 8ada20184978..16481cf3e931 100644 --- a/arch/arm/mach-clps711x/ceiva.c +++ b/arch/arm/mach-clps711x/ceiva.c @@ -56,8 +56,6 @@ static void __init ceiva_map_io(void) MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame") /* Maintainer: Rob Scott */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .map_io = ceiva_map_io, .init_irq = clps711x_init_irq, diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index 3c3bf45039ff..67b5abb4a60a 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -37,8 +37,6 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags, MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") /* Maintainer: Nobody */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .fixup = fixup_clep7312, .map_io = clps711x_map_io, diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c index 4a7a2322979a..98ca5b2e940d 100644 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ b/arch/arm/mach-clps711x/edb7211-arch.c @@ -57,8 +57,6 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags, MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") /* Maintainer: Jon McClintock */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */ .fixup = fixup_edb7211, .map_io = edb7211_map_io, diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index a696099aa4f8..b1cb479e71e9 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -75,8 +75,6 @@ fortunet_fixup(struct machine_desc *desc, struct tag *tags, MACHINE_START(FORTUNET, "ARM-FortuNet") /* Maintainer: FortuNet Inc. */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, .boot_params = 0x00000000, .fixup = fortunet_fixup, .map_io = clps711x_map_io, diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S index 072cc6b61ba3..507c6873b7ee 100644 --- a/arch/arm/mach-clps711x/include/mach/debug-macro.S +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -14,16 +14,14 @@ #include <mach/hardware.h> #include <asm/hardware/clps7111.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #CLPS7111_PHYS_BASE - movne \rx, #CLPS7111_VIRT_BASE + .macro addruart, rp, rv #ifndef CONFIG_DEBUG_CLPS711X_UART2 - add \rx, \rx, #0x0000 @ UART1 + mov \rp, #0x0000 @ UART1 #else - add \rx, \rx, #0x1000 @ UART2 + mov \rp, #0x1000 @ UART2 #endif + orr \rv, \rp, #CLPS7111_VIRT_BASE + orr \rp, \rp, #CLPS7111_PHYS_BASE .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h index ea6cc7beff28..30b3a287ed88 100644 --- a/arch/arm/mach-clps711x/include/mach/vmalloc.h +++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 0d94a30fd6fc..cefbce0480b9 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -89,8 +89,6 @@ static void __init p720t_map_io(void) MACHINE_START(P720T, "ARM-Prospector720T") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .fixup = fixup_p720t, .map_io = p720t_map_io, diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 9df8391fd78a..90fe9ab8591d 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -142,8 +142,6 @@ static void __init cns3420_map_io(void) } MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") - .phys_io = CNS3XXX_UART0_BASE, - .io_pg_offst = (CNS3XXX_UART0_BASE_VIRT >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = cns3420_map_io, .init_irq = cns3xxx_init_irq, diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S index d16ce7eb00e9..56d828634db5 100644 --- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S @@ -10,12 +10,10 @@ * published by the Free Software Foundation. */ - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf0000000 @ virtual base - orr \rx, \rx, #0x00009000 + .macro addruart,rp,rv + mov \rp, #0x00009000 + orr \rv, \rp, #0xf0000000 @ virtual base + orr \rp, \rp, #0x10000000 .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index c3994f341e49..7f3cdbfc0fbb 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -597,8 +597,6 @@ static void __init da830_evm_map_io(void) } MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DA8XX_DDR_BASE + 0x100), .map_io = da830_evm_map_io, .init_irq = cp_intc_init, diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index fdc2cc500fc6..b26f5cbfce3e 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -817,8 +817,6 @@ static void __init da850_evm_map_io(void) } MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DA8XX_DDR_BASE + 0x100), .map_io = da850_evm_map_io, .init_irq = cp_intc_init, diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index a3191015efee..6e7cad13352c 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -351,8 +351,6 @@ static __init void dm355_evm_init(void) } MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = dm355_evm_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index f1d8132cf0c3..543f9911b281 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -270,8 +270,6 @@ static __init void dm355_leopard_init(void) } MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = dm355_leopard_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 84acef1d0b3d..944a0cbaf5cb 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -613,8 +613,6 @@ static __init void dm365_evm_init(void) } MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = dm365_evm_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 34c8b418cd72..d59fba15ba8d 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -706,8 +706,6 @@ static __init void davinci_evm_init(void) MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software <source@mvista.com> */ - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DAVINCI_DDR_BASE + 0x100), .map_io = davinci_evm_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 4502f346b2b0..6890488fb92b 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -786,8 +786,6 @@ void __init dm646x_board_setup_refclk(struct clk *clk) } MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = davinci_map_io, .init_irq = davinci_irq_init, @@ -796,8 +794,6 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") MACHINE_END MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (0x80000100), .map_io = davinci_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 4c30e929bbf9..a4def889275c 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -275,8 +275,6 @@ static __init void davinci_ntosd2_init(void) MACHINE_START(NEUROS_OSD2, "Neuros OSD2") /* Maintainer: Neuros Technologies <neuros@groups.google.com> */ - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DAVINCI_DDR_BASE + 0x100), .map_io = davinci_ntosd2_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 23e664a1a802..9bdf8aafcc84 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -154,8 +154,6 @@ static __init void davinci_sffsdr_init(void) MACHINE_START(SFFSDR, "Lyrtech SFFSDR") /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */ - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DAVINCI_DDR_BASE + 0x100), .map_io = davinci_sffsdr_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index fe2a9d9c8bb7..b4de35b78904 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -164,8 +164,6 @@ console_initcall(tnetv107x_evm_console_init); #endif MACHINE_START(TNETV107X, "TNETV107X EVM") - .phys_io = TNETV107X_IO_BASE, - .io_pg_offst = (TNETV107X_IO_VIRT >> 18) & 0xfffc, .boot_params = (TNETV107X_DDR_BASE + 0x100), .map_io = tnetv107x_init, .init_irq = cp_intc_init, diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index f761dfdb8689..9f1befc5ac38 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -29,35 +29,39 @@ davinci_uart_phys: .word 0 davinci_uart_virt: .word 0 .popsection - .macro addruart, rx, tmp + .macro addruart, rp, rv /* Use davinci_uart_phys/virt if already configured */ -10: mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =__virt_to_phys(davinci_uart_phys) - ldrne \rx, =davinci_uart_virt - ldr \rx, [\rx] - cmp \rx, #0 @ is port configured? +10: mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =__virt_to_phys(davinci_uart_phys) + ldrne \rp, =davinci_uart_phys + add \rv, \rp, #4 @ davinci_uart_virt + ldr \rp, [\rp, #0] + ldr \rv, [\rv, #0] + cmp \rp, #0 @ is port configured? + cmpne \rv, #0 bne 99f @ already configured - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? + /* Check the debug UART address set in uncompress.h */ + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? /* Copy uart phys address from decompressor uart info */ - ldreq \tmp, =__virt_to_phys(davinci_uart_phys) - ldrne \tmp, =davinci_uart_phys - ldreq \rx, =DAVINCI_UART_INFO - ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO) - ldr \rx, [\rx, #0] - str \rx, [\tmp] + ldreq \rv, =__virt_to_phys(davinci_uart_phys) + ldrne \rv, =davinci_uart_phys + ldreq \rp, =DAVINCI_UART_INFO + ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rp, [\rp, #0] + str \rp, [\rv] /* Copy uart virt address from decompressor uart info */ - ldreq \tmp, =__virt_to_phys(davinci_uart_virt) - ldrne \tmp, =davinci_uart_virt - ldreq \rx, =DAVINCI_UART_INFO - ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO) - ldr \rx, [\rx, #4] - str \rx, [\tmp] + ldreq \rv, =__virt_to_phys(davinci_uart_virt) + ldrne \rv, =davinci_uart_virt + ldreq \rp, =DAVINCI_UART_INFO + ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rp, [\rp, #4] + str \rp, [\rv] b 10b 99: diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c index bef70460fbc6..95925aa76dd9 100644 --- a/arch/arm/mach-dove/dove-db-setup.c +++ b/arch/arm/mach-dove/dove-db-setup.c @@ -94,8 +94,6 @@ static void __init dove_db_init(void) } MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board") - .phys_io = DOVE_SB_REGS_PHYS_BASE, - .io_pg_offst = ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = dove_db_init, .map_io = dove_map_io, diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S index 1521d13f1d14..da8bf2bad3b1 100644 --- a/arch/arm/mach-dove/include/mach/debug-macro.S +++ b/arch/arm/mach-dove/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include <mach/bridge-regs.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =DOVE_SB_REGS_PHYS_BASE - ldrne \rx, =DOVE_SB_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =DOVE_SB_REGS_PHYS_BASE + ldr \rv, =DOVE_SB_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index c7bc7fbb11a6..5df4099fc14f 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -280,8 +280,6 @@ arch_initcall(ebsa110_init); MACHINE_START(EBSA110, "EBSA110") /* Maintainer: Russell King */ - .phys_io = 0xe0000000, - .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, .boot_params = 0x00000400, .reserve_lp0 = 1, .reserve_lp2 = 1, diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S index ebbd89f0e6c0..7ef5690fd08c 100644 --- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S +++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S @@ -11,9 +11,10 @@ * **/ - .macro addruart, rx, tmp - mov \rx, #0xf0000000 - orr \rx, \rx, #0x00000be0 + .macro addruart, rp, rv + mov \rp, #0xf0000000 + orr \rp, \rp, #0x00000be0 + mov \rp, \rv .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h index 9b44c19e95ec..60bde56fba4c 100644 --- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h +++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h @@ -7,4 +7,4 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#define VMALLOC_END (PAGE_OFFSET + 0x1f000000) +#define VMALLOC_END 0xdf000000 diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index f744f676783f..61b98ce4b673 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -33,8 +33,6 @@ static void __init adssphere_init_machine(void) MACHINE_START(ADSSPHERE, "ADS Sphere board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index c2ce9034ba87..4b0431652131 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -124,8 +124,6 @@ static void __init edb93xx_init_machine(void) #ifdef CONFIG_MACH_EDB9301 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, @@ -137,8 +135,6 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9302 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") /* Maintainer: George Kashperko <george@chas.com.ua> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, @@ -150,8 +146,6 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9302A MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, @@ -163,8 +157,6 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9307 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, @@ -176,8 +168,6 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9307A MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, @@ -189,8 +179,6 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9312 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, @@ -202,8 +190,6 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9315 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, @@ -215,8 +201,6 @@ MACHINE_END #ifdef CONFIG_MACH_EDB9315A MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index d97168c0ba33..9bd3152bff9a 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -33,8 +33,6 @@ static void __init gesbc9312_init_machine(void) MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S index 5cd22444e223..b25bc9076367 100644 --- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S @@ -11,12 +11,11 @@ */ #include <mach/ep93xx-regs.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base - ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base - orr \rx, \rx, #0x000c0000 + .macro addruart, rp, rv + ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base + ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base + orr \rp, \rp, #0x000c0000 + orr \rv, \rv, #0x000c0000 .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 2ba776320a82..7adea6258efe 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -77,8 +77,6 @@ static void __init micro9_init_machine(void) #ifdef CONFIG_MACH_MICRO9H MACHINE_START(MICRO9, "Contec Micro9-High") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, @@ -90,8 +88,6 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9M MACHINE_START(MICRO9M, "Contec Micro9-Mid") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, @@ -103,8 +99,6 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9L MACHINE_START(MICRO9L, "Contec Micro9-Lite") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, @@ -116,8 +110,6 @@ MACHINE_END #ifdef CONFIG_MACH_MICRO9S MACHINE_START(MICRO9S, "Contec Micro9-Slim") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 5dded5884133..f22ce8db7947 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -65,8 +65,6 @@ static void __init simone_init_machine(void) MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index a12c89301297..ac601fe2b448 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -163,8 +163,6 @@ static void __init snappercl15_init_machine(void) MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 93aeab8af705..c2d2cf40ead9 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -257,8 +257,6 @@ static void __init ts72xx_init_machine(void) MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ts72xx_map_io, .init_irq = ep93xx_init_irq, diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index 1b996b26d2e0..5b1a8db779be 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -86,8 +86,6 @@ fixup_cats(struct machine_desc *desc, struct tag *tags, MACHINE_START(CATS, "Chalice-CATS") /* Maintainer: Philip Blundell */ - .phys_io = DC21285_ARMCSR_BASE, - .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, .boot_params = 0x00000100, .soft_reboot = 1, .fixup = fixup_cats, diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index 30040fd588cc..2ef69ff44ba8 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -15,8 +15,6 @@ MACHINE_START(EBSA285, "EBSA285") /* Maintainer: Russell King */ - .phys_io = DC21285_ARMCSR_BASE, - .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, .boot_params = 0x00000100, .video_start = 0x000a0000, .video_end = 0x000bffff, diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 60dda1318f22..3c9e0c40c679 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -15,12 +15,10 @@ #ifndef CONFIG_DEBUG_DC21285_PORT /* For NetWinder debugging */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x7c000000 @ physical - movne \rx, #0xff000000 @ virtual - orr \rx, \rx, #0x000003f8 + .macro addruart, rp, rv + mov \rp, #0x000003f8 + orr \rv, \rp, #0x7c000000 @ physical + orr \rp, \rp, #0xff000000 @ virtual .endm #define UART_SHIFT 0 @@ -32,14 +30,14 @@ .equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_low, ARMCSR_BASE & 0x00ffffff - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x42000000 - movne \rx, #dc21285_high + .macro addruart, rp, rv .if dc21285_low - orrne \rx, \rx, #dc21285_low + mov \rp, #dc21285_low + .else + mov \rp, #0 .endif + orr \rv, \rp, #0x42000000 + orr \rp, \rp, #dc21285_high .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h index d0958d860a3c..0ffbb7c85e59 100644 --- a/arch/arm/mach-footbridge/include/mach/vmalloc.h +++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h @@ -7,4 +7,4 @@ */ -#define VMALLOC_END (PAGE_OFFSET + 0x30000000) +#define VMALLOC_END 0xf0000000 diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index ac7ffa6fc413..06e514f372d0 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -648,8 +648,6 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags, MACHINE_START(NETWINDER, "Rebel-NetWinder") /* Maintainer: Russell King/Rebel.com */ - .phys_io = DC21285_ARMCSR_BASE, - .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, .boot_params = 0x00000100, .video_start = 0x000a0000, .video_end = 0x000bffff, diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c index e2c9f0690b16..3285e91ca8c1 100644 --- a/arch/arm/mach-footbridge/personal.c +++ b/arch/arm/mach-footbridge/personal.c @@ -15,8 +15,6 @@ MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer") /* Maintainer: Jamey Hicks / George France */ - .phys_io = DC21285_ARMCSR_BASE, - .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c index 01f1d6daab44..2ba096de0034 100644 --- a/arch/arm/mach-gemini/board-nas4220b.c +++ b/arch/arm/mach-gemini/board-nas4220b.c @@ -101,8 +101,6 @@ static void __init ib4220b_init(void) } MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B") - .phys_io = 0x7fffc000, - .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, .boot_params = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c index e0de968e32a6..a9a0d8b01942 100644 --- a/arch/arm/mach-gemini/board-rut1xx.c +++ b/arch/arm/mach-gemini/board-rut1xx.c @@ -85,8 +85,6 @@ static void __init rut1xx_init(void) } MACHINE_START(RUT100, "Teltonika RUT100") - .phys_io = 0x7fffc000, - .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, .boot_params = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index 36538c15b3c4..8b88d50d4337 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -133,8 +133,6 @@ static void __init wbd111_init(void) } MACHINE_START(WBD111, "Wiliboard WBD-111") - .phys_io = 0x7fffc000, - .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, .boot_params = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index ece8b4c65110..1eebcecd1c33 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -133,8 +133,6 @@ static void __init wbd222_init(void) } MACHINE_START(WBD222, "Wiliboard WBD-222") - .phys_io = 0x7fffc000, - .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, .boot_params = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S index ad477047069d..f40e006d296e 100644 --- a/arch/arm/mach-gemini/include/mach/debug-macro.S +++ b/arch/arm/mach-gemini/include/mach/debug-macro.S @@ -11,11 +11,9 @@ */ #include <mach/hardware.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =GEMINI_UART_BASE @ physical - ldrne \rx, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual + .macro addruart, rp, rv + ldr \rp, =GEMINI_UART_BASE @ physical + ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c index 78be457dc324..79f0b896e446 100644 --- a/arch/arm/mach-h720x/h7201-eval.c +++ b/arch/arm/mach-h720x/h7201-eval.c @@ -30,8 +30,6 @@ MACHINE_START(H7201, "Hynix GMS30C7201") /* Maintainer: Robert Schwebel, Pengutronix */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, .boot_params = 0xc0001000, .map_io = h720x_map_io, .init_irq = h720x_init_irq, diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c index 8c0ba99d683f..cc28b1efe047 100644 --- a/arch/arm/mach-h720x/h7202-eval.c +++ b/arch/arm/mach-h720x/h7202-eval.c @@ -72,8 +72,6 @@ static void __init init_eval_h7202(void) MACHINE_START(H7202, "Hynix HMS30C7202") /* Maintainer: Robert Schwebel, Pengutronix */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, .boot_params = 0x40000100, .map_io = h720x_map_io, .init_irq = h7202_init_irq, diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S index 27cafd12f033..c2093e835720 100644 --- a/arch/arm/mach-h720x/include/mach/debug-macro.S +++ b/arch/arm/mach-h720x/include/mach/debug-macro.S @@ -16,12 +16,10 @@ .equ io_virt, IO_VIRT .equ io_phys, IO_PHYS - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #io_phys @ physical base address - movne \rx, #io_virt @ virtual address - add \rx, \rx, #0x00020000 @ UART1 + .macro addruart, rp, rv + mov \rp, #0x00020000 @ UART1 + add \rv, \rp, #io_virt @ virtual address + add \rp, \rp, #io_phys @ physical base address .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h index ff1460d6841b..a45915b88756 100644 --- a/arch/arm/mach-h720x/include/mach/vmalloc.h +++ b/arch/arm/mach-h720x/include/mach/vmalloc.h @@ -5,6 +5,6 @@ #ifndef __ARCH_ARM_VMALLOC_H #define __ARCH_ARM_VMALLOC_H -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 #endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 2f7e2728970d..197f9e241cff 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -147,8 +147,8 @@ choice default MACH_EUKREA_MBIMX27_BASEBOARD config MACH_EUKREA_MBIMX27_BASEBOARD - prompt "Eukrea MBIMX27 development board" - bool + bool "Eukrea MBIMX27 development board" + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SPI_IMX help @@ -164,6 +164,15 @@ config MACH_MX27_3DS Include support for MX27PDK platform. This includes specific configurations for the board and its peripherals. +config MACH_IMX27_VISSTRIM_M10 + bool "Vista Silicon i.MX27 Visstrim_m10" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for Visstrim_m10 platform and its different variants. + This includes specific configurations for the board and its + peripherals. + config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" select IMX_HAVE_PLATFORM_IMX_UART @@ -174,6 +183,7 @@ config MACH_IMX27LITE config MACH_PCA100 bool "Phytec phyCARD-s (pca100)" select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 46a9fdfbbd15..5582692bb176 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o +obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c index c05096c38301..daca30b2d5b1 100644 --- a/arch/arm/mach-imx/clock-imx1.c +++ b/arch/arm/mach-imx/clock-imx1.c @@ -592,7 +592,7 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, spi_clk) + _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk) _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK(NULL, "mshc", mshc_clk) diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c index bb419ef4d133..cf15ea516a72 100644 --- a/arch/arm/mach-imx/clock-imx21.c +++ b/arch/arm/mach-imx/clock-imx21.c @@ -1172,9 +1172,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "pwm", pwm_clk[0]) _REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0]) _REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1]) - _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0]) - _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1]) - _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) + _REGISTER_CLOCK("imx21-cspi.0", NULL, cspi_clk[0]) + _REGISTER_CLOCK("imx21-cspi.1", NULL, cspi_clk[1]) + _REGISTER_CLOCK("imx21-cspi.2", NULL, cspi_clk[2]) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0]) _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) _REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0]) diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index 5a1aa15c8a16..98a25bada783 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -594,27 +594,27 @@ DEFINE_CLOCK(uart2_clk1, 0, PCCR1, 30, NULL, NULL, &ipg_clk); DEFINE_CLOCK(uart1_clk1, 0, PCCR1, 31, NULL, NULL, &ipg_clk); /* Clocks we cannot directly gate, but drivers need their rates */ -DEFINE_CLOCK(cspi1_clk, 0, 0, 0, NULL, &cspi1_clk1, &per2_clk); -DEFINE_CLOCK(cspi2_clk, 1, 0, 0, NULL, &cspi2_clk1, &per2_clk); -DEFINE_CLOCK(cspi3_clk, 2, 0, 0, NULL, &cspi13_clk1, &per2_clk); -DEFINE_CLOCK(sdhc1_clk, 0, 0, 0, NULL, &sdhc1_clk1, &per2_clk); -DEFINE_CLOCK(sdhc2_clk, 1, 0, 0, NULL, &sdhc2_clk1, &per2_clk); -DEFINE_CLOCK(sdhc3_clk, 2, 0, 0, NULL, &sdhc3_clk1, &per2_clk); -DEFINE_CLOCK(pwm_clk, 0, 0, 0, NULL, &pwm_clk1, &per1_clk); -DEFINE_CLOCK(gpt1_clk, 0, 0, 0, NULL, &gpt1_clk1, &per1_clk); -DEFINE_CLOCK(gpt2_clk, 1, 0, 0, NULL, &gpt2_clk1, &per1_clk); -DEFINE_CLOCK(gpt3_clk, 2, 0, 0, NULL, &gpt3_clk1, &per1_clk); -DEFINE_CLOCK(gpt4_clk, 3, 0, 0, NULL, &gpt4_clk1, &per1_clk); -DEFINE_CLOCK(gpt5_clk, 4, 0, 0, NULL, &gpt5_clk1, &per1_clk); -DEFINE_CLOCK(gpt6_clk, 5, 0, 0, NULL, &gpt6_clk1, &per1_clk); -DEFINE_CLOCK(uart1_clk, 0, 0, 0, NULL, &uart1_clk1, &per1_clk); -DEFINE_CLOCK(uart2_clk, 1, 0, 0, NULL, &uart2_clk1, &per1_clk); -DEFINE_CLOCK(uart3_clk, 2, 0, 0, NULL, &uart3_clk1, &per1_clk); -DEFINE_CLOCK(uart4_clk, 3, 0, 0, NULL, &uart4_clk1, &per1_clk); -DEFINE_CLOCK(uart5_clk, 4, 0, 0, NULL, &uart5_clk1, &per1_clk); -DEFINE_CLOCK(uart6_clk, 5, 0, 0, NULL, &uart6_clk1, &per1_clk); -DEFINE_CLOCK1(lcdc_clk, 0, 0, 0, parent, &lcdc_clk1, &per3_clk); -DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk); +DEFINE_CLOCK(cspi1_clk, 0, NULL, 0, NULL, &cspi1_clk1, &per2_clk); +DEFINE_CLOCK(cspi2_clk, 1, NULL, 0, NULL, &cspi2_clk1, &per2_clk); +DEFINE_CLOCK(cspi3_clk, 2, NULL, 0, NULL, &cspi13_clk1, &per2_clk); +DEFINE_CLOCK(sdhc1_clk, 0, NULL, 0, NULL, &sdhc1_clk1, &per2_clk); +DEFINE_CLOCK(sdhc2_clk, 1, NULL, 0, NULL, &sdhc2_clk1, &per2_clk); +DEFINE_CLOCK(sdhc3_clk, 2, NULL, 0, NULL, &sdhc3_clk1, &per2_clk); +DEFINE_CLOCK(pwm_clk, 0, NULL, 0, NULL, &pwm_clk1, &per1_clk); +DEFINE_CLOCK(gpt1_clk, 0, NULL, 0, NULL, &gpt1_clk1, &per1_clk); +DEFINE_CLOCK(gpt2_clk, 1, NULL, 0, NULL, &gpt2_clk1, &per1_clk); +DEFINE_CLOCK(gpt3_clk, 2, NULL, 0, NULL, &gpt3_clk1, &per1_clk); +DEFINE_CLOCK(gpt4_clk, 3, NULL, 0, NULL, &gpt4_clk1, &per1_clk); +DEFINE_CLOCK(gpt5_clk, 4, NULL, 0, NULL, &gpt5_clk1, &per1_clk); +DEFINE_CLOCK(gpt6_clk, 5, NULL, 0, NULL, &gpt6_clk1, &per1_clk); +DEFINE_CLOCK(uart1_clk, 0, NULL, 0, NULL, &uart1_clk1, &per1_clk); +DEFINE_CLOCK(uart2_clk, 1, NULL, 0, NULL, &uart2_clk1, &per1_clk); +DEFINE_CLOCK(uart3_clk, 2, NULL, 0, NULL, &uart3_clk1, &per1_clk); +DEFINE_CLOCK(uart4_clk, 3, NULL, 0, NULL, &uart4_clk1, &per1_clk); +DEFINE_CLOCK(uart5_clk, 4, NULL, 0, NULL, &uart5_clk1, &per1_clk); +DEFINE_CLOCK(uart6_clk, 5, NULL, 0, NULL, &uart6_clk1, &per1_clk); +DEFINE_CLOCK1(lcdc_clk, 0, NULL, 0, parent, &lcdc_clk1, &per3_clk); +DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -640,9 +640,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) - _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) + _REGISTER_CLOCK("imx27-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx27-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx27-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk) diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h index a8d94f078196..81979486218e 100644 --- a/arch/arm/mach-imx/devices-imx1.h +++ b/arch/arm/mach-imx/devices-imx1.h @@ -9,10 +9,12 @@ #include <mach/mx1.h> #include <mach/devices-common.h> -#define imx1_add_i2c_imx(pdata) \ - imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata) +extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst; +#define imx1_add_imx_i2c(pdata) \ + imx_add_imx_i2c(&imx1_imx_i2c_data, pdata) -#define imx1_add_imx_uart0(pdata) \ - imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata) -#define imx1_add_imx_uart1(pdata) \ - imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata) +extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst; +#define imx1_add_imx_uart(id, pdata) \ + imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata) +#define imx1_add_imx_uart0(pdata) imx1_add_imx_uart(0, pdata) +#define imx1_add_imx_uart1(pdata) imx1_add_imx_uart(1, pdata) diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index 42788e99d127..d189039749b0 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -9,22 +9,28 @@ #include <mach/mx21.h> #include <mach/devices-common.h> -#define imx21_add_i2c_imx(pdata) \ - imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata) +extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst; +#define imx21_add_imx_i2c(pdata) \ + imx_add_imx_i2c(&imx21_imx_i2c_data, pdata) -#define imx21_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata) -#define imx21_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata) -#define imx21_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata) -#define imx21_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata) +extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst; +#define imx21_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata) +extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst; +#define imx21_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata) +#define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata) +#define imx21_add_imx_uart1(pdata) imx21_add_imx_uart(1, pdata) +#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata) +#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata) + +extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst; #define imx21_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx21_mxc_nand_data, pdata) -#define imx21_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata) -#define imx21_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata) +extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst; +#define imx21_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx21_cspi_data[id], pdata) +#define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata) +#define imx21_add_spi_imx1(pdata) imx21_add_cspi(1, pdata) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 65e7bb7ec2e8..7011690364f2 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -9,30 +9,35 @@ #include <mach/mx27.h> #include <mach/devices-common.h> -#define imx27_add_i2c_imx0(pdata) \ - imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata) -#define imx27_add_i2c_imx1(pdata) \ - imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata) +extern const struct imx_fec_data imx27_fec_data __initconst; +#define imx27_add_fec(pdata) \ + imx_add_fec(&imx27_fec_data, pdata) -#define imx27_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata) -#define imx27_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata) -#define imx27_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata) -#define imx27_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata) -#define imx27_add_imx_uart4(pdata) \ - imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata) -#define imx27_add_imx_uart5(pdata) \ - imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata) +extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst; +#define imx27_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata) +extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst; +#define imx27_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata) + +extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst; +#define imx27_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata) +#define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata) +#define imx27_add_imx_uart1(pdata) imx27_add_imx_uart(1, pdata) +#define imx27_add_imx_uart2(pdata) imx27_add_imx_uart(2, pdata) +#define imx27_add_imx_uart3(pdata) imx27_add_imx_uart(3, pdata) +#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata) +#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata) + +extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst; #define imx27_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx27_mxc_nand_data, pdata) -#define imx27_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata) -#define imx27_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata) -#define imx27_add_spi_imx2(pdata) \ - imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata) +extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst; +#define imx27_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx27_cspi_data[id], pdata) +#define imx27_add_spi_imx0(pdata) imx27_add_cspi(0, pdata) +#define imx27_add_spi_imx1(pdata) imx27_add_cspi(1, pdata) +#define imx27_add_spi_imx2(pdata) imx27_add_cspi(2, pdata) diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c index 9c271a752b84..fba5047de8b1 100644 --- a/arch/arm/mach-imx/devices.c +++ b/arch/arm/mach-imx/devices.c @@ -314,27 +314,6 @@ struct platform_device mxc_fb_device = { }, }; -#ifdef CONFIG_MACH_MX27 -static struct resource mxc_fec_resources[] = { - { - .start = MX27_FEC_BASE_ADDR, - .end = MX27_FEC_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_FEC, - .end = MX27_INT_FEC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_fec_device = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_fec_resources), - .resource = mxc_fec_resources, -}; -#endif - static struct resource mxc_pwm_resources[] = { { .start = MX2x_PWM_BASE_ADDR, @@ -480,41 +459,6 @@ struct platform_device mxc_usbh2 = { }; #endif -#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix) \ - { \ - .name = _name, \ - .start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ - .end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ - .flags = IORESOURCE_DMA, \ - } - -#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq) \ - static struct resource imx_ssi_resources ## n[] = { \ - { \ - .start = MX2x_SSI ## ssin ## _BASE_ADDR, \ - .end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = MX2x_INT_SSI1, \ - .end = MX2x_INT_SSI1, \ - .flags = IORESOURCE_IRQ, \ - }, \ - DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0), \ - DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0), \ - DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1), \ - DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1), \ - }; \ - \ - struct platform_device imx_ssi_device ## n = { \ - .name = "imx-ssi", \ - .id = n, \ - .num_resources = ARRAY_SIZE(imx_ssi_resources ## n), \ - .resource = imx_ssi_resources ## n, \ - } - -DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); -DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); - /* GPIO port description */ #define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \ { \ diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h index efd4527506a5..807f02a031c9 100644 --- a/arch/arm/mach-imx/devices.h +++ b/arch/arm/mach-imx/devices.h @@ -16,7 +16,6 @@ extern struct platform_device mxc_gpt5; extern struct platform_device mxc_wdt; extern struct platform_device mxc_w1_master_device; extern struct platform_device mxc_fb_device; -extern struct platform_device mxc_fec_device; extern struct platform_device mxc_pwm_device; extern struct platform_device mxc_sdhc_device0; extern struct platform_device mxc_sdhc_device1; @@ -26,7 +25,5 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mx21_usbhc_device; -extern struct platform_device imx_ssi_device0; -extern struct platform_device imx_ssi_device1; extern struct platform_device imx_kpp_device; #endif diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 4edc5f439201..026263c665ca 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -36,13 +36,12 @@ #include <mach/hardware.h> #include <mach/mmc.h> #include <mach/spi.h> -#include <mach/ssi.h> #include <mach/audmux.h> #include "devices-imx27.h" #include "devices.h" -static int eukrea_mbimx27_pins[] = { +static const int eukrea_mbimx27_pins[] __initconst = { /* UART2 */ PE3_PF_UART2_CTS, PE4_PF_UART2_RTS, @@ -311,7 +310,8 @@ static struct imxmmc_platform_data sdhc_pdata = { .dat3_card_detect = 1, }; -struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata = { +static const +struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = { .flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE, }; @@ -357,7 +357,7 @@ void __init eukrea_mbimx27_baseboard_init(void) i2c_register_board_info(0, eukrea_mbimx27_i2c_devices, ARRAY_SIZE(eukrea_mbimx27_i2c_devices)); - mxc_register_device(&imx_ssi_device0, &eukrea_mbimx27_ssi_pdata); + imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata); #if defined(CONFIG_TOUCHSCREEN_ADS7846) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 6830afd1d2ba..745ee60fb068 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -46,7 +46,7 @@ #include "devices-imx27.h" #include "devices.h" -static int eukrea_cpuimx27_pins[] = { +static const int eukrea_cpuimx27_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -157,7 +157,6 @@ cpuimx27_nand_board_info __initconst = { static struct platform_device *platform_devices[] __initdata = { &eukrea_cpuimx27_nor_mtd_device, - &mxc_fec_device, &mxc_wdt, &mxc_w1_master_device, }; @@ -259,8 +258,9 @@ static void __init eukrea_cpuimx27_init(void) i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); - imx27_add_i2c_imx0(&cpuimx27_i2c1_data); + imx27_add_imx_i2c(0, &cpuimx27_i2c1_data); + imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) @@ -307,8 +307,6 @@ static struct sys_timer eukrea_cpuimx27_timer = { }; MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") - .phys_io = MX27_AIPI_BASE_ADDR, - .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c new file mode 100644 index 000000000000..59716fab586d --- /dev/null +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -0,0 +1,261 @@ +/* + * mach-imx27_visstrim_m10.c + * + * Copyright 2010 Javier Martin <javier.martin@vista-silicon.com> + * + * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/i2c/pca953x.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/common.h> +#include <mach/mmc.h> +#include <mach/iomux.h> +#include <mach/mxc_ehci.h> + +#include "devices-imx27.h" +#include "devices.h" + +#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) +#define SDHC1_IRQ IRQ_GPIOB(25) + +static const int visstrim_m10_pins[] __initconst = { + /* UART1 (console) */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* SDHC1 */ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + /* Both I2Cs */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* USB OTG */ + OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, + PC9_PF_USBOTG_DATA0, + PC11_PF_USBOTG_DATA1, + PC10_PF_USBOTG_DATA2, + PC13_PF_USBOTG_DATA3, + PC12_PF_USBOTG_DATA4, + PC7_PF_USBOTG_DATA5, + PC8_PF_USBOTG_DATA6, + PE25_PF_USBOTG_DATA7, + PE24_PF_USBOTG_CLK, + PE2_PF_USBOTG_DIR, + PE0_PF_USBOTG_NXT, + PE1_PF_USBOTG_STP, + PB23_PF_USB_PWR, + PB24_PF_USB_OC, +}; + +/* GPIOs used as events for applications */ +static struct gpio_keys_button visstrim_gpio_keys[] = { + { + .type = EV_KEY, + .code = KEY_RESTART, + .gpio = (GPIO_PORTC + 15), + .desc = "Default config", + .active_low = 0, + .wakeup = 1, + }, + { + .type = EV_KEY, + .code = KEY_RECORD, + .gpio = (GPIO_PORTF + 14), + .desc = "Record", + .active_low = 0, + .wakeup = 1, + }, + { + .type = EV_KEY, + .code = KEY_STOP, + .gpio = (GPIO_PORTF + 13), + .desc = "Stop", + .active_low = 0, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = { + .buttons = visstrim_gpio_keys, + .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), +}; + +static struct platform_device visstrim_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &visstrim_gpio_keys_platform_data, + }, +}; + +/* Visstrim_SM10 has a microSD slot connected to sdhc1 */ +static int visstrim_m10_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + + ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING, + "mmc-detect", data); + return ret; +} + +static void visstrim_m10_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(SDHC1_IRQ, data); +} + +static struct imxmmc_platform_data visstrim_m10_sdhc_pdata = { + .init = visstrim_m10_sdhc1_init, + .exit = visstrim_m10_sdhc1_exit, +}; + +/* Visstrim_SM10 NOR flash */ +static struct physmap_flash_data visstrim_m10_flash_data = { + .width = 2, +}; + +static struct resource visstrim_m10_flash_resource = { + .start = 0xc0000000, + .end = 0xc0000000 + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device visstrim_m10_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &visstrim_m10_flash_data, + }, + .num_resources = 1, + .resource = &visstrim_m10_flash_resource, +}; + +static struct platform_device *platform_devices[] __initdata = { + &visstrim_gpio_keys_device, + &visstrim_m10_nor_mtd_device, +}; + +/* Visstrim_M10 uses UART0 as console */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* I2C */ +static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = { + .bitrate = 100000, +}; + +static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { + .gpio_base = 240, /* After MX27 internal GPIOs */ + .invert = 0, +}; + +static struct i2c_board_info visstrim_m10_i2c_devices[] = { + { + I2C_BOARD_INFO("pca9555", 0x20), + .platform_data = &visstrim_m10_pca9555_pdata, + }, +}; + +/* USB OTG */ +static int otg_phy_init(struct platform_device *pdev) +{ + gpio_set_value(OTG_PHY_CS_GPIO, 0); + return 0; +} + +static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = { + .init = otg_phy_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED, +}; + +static void __init visstrim_m10_board_init(void) +{ + int ret; + + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, + ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); + if (ret) + pr_err("Failed to setup pins (%d)\n", ret); + + imx27_add_imx_uart0(&uart_pdata); + + i2c_register_board_info(0, visstrim_m10_i2c_devices, + ARRAY_SIZE(visstrim_m10_i2c_devices)); + imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); + imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); + mxc_register_device(&mxc_sdhc_device0, &visstrim_m10_sdhc_pdata); + mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata); + imx27_add_fec(NULL); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init visstrim_m10_timer_init(void) +{ + mx27_clocks_init((unsigned long)25000000); +} + +static struct sys_timer visstrim_m10_timer = { + .init = visstrim_m10_timer_init, +}; + +MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mx27_init_irq, + .init_machine = visstrim_m10_board_init, + .timer = &visstrim_m10_timer, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 22a2b5d91213..bbdbc75127d3 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -27,7 +27,7 @@ #include "devices-imx27.h" #include "devices.h" -static unsigned int mx27lite_pins[] = { +static const int mx27lite_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -58,16 +58,12 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct platform_device *platform_devices[] __initdata = { - &mxc_fec_device, -}; - static void __init mx27lite_init(void) { mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), "imx27lite"); imx27_add_imx_uart0(&uart_pdata); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx27_add_fec(NULL); } static void __init mx27lite_timer_init(void) @@ -80,8 +76,6 @@ static struct sys_timer mx27lite_timer = { }; MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") - .phys_io = MX27_AIPI_BASE_ADDR, - .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 77a760cfadc0..6187ce9ba7d5 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -32,7 +32,7 @@ #include "devices-imx1.h" #include "devices.h" -static int mx1ads_pins[] = { +static const int mx1ads_pins[] __initconst = { /* UART1 */ PC9_PF_UART1_CTS, PC10_PF_UART1_RTS, @@ -131,7 +131,7 @@ static void __init mx1ads_init(void) i2c_register_board_info(0, mx1ads_i2c_devices, ARRAY_SIZE(mx1ads_i2c_devices)); - imx1_add_i2c_imx(&mx1ads_i2c_data); + imx1_add_imx_i2c(&mx1ads_i2c_data); } static void __init mx1ads_timer_init(void) @@ -145,8 +145,6 @@ struct sys_timer mx1ads_timer = { MACHINE_START(MX1ADS, "Freescale MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ - .phys_io = MX1_IO_BASE_ADDR, - .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX1_PHYS_OFFSET + 0x100, .map_io = mx1_map_io, .init_irq = mx1_init_irq, @@ -155,8 +153,6 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") MACHINE_END MACHINE_START(MXLADS, "Freescale MXLADS") - .phys_io = MX1_IO_BASE_ADDR, - .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX1_PHYS_OFFSET + 0x100, .map_io = mx1_map_io, .init_irq = mx1_init_irq, diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 96d7f8189f32..e1282e9f50ff 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -67,7 +67,7 @@ #define MX21ADS_IO_LED4_ON 0x4000 #define MX21ADS_IO_LED3_ON 0x8000 -static unsigned int mx21ads_pins[] = { +static const int mx21ads_pins[] __initconst = { /* CS8900A */ (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11), @@ -314,8 +314,6 @@ static struct sys_timer mx21ads_timer = { MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .phys_io = MX21_AIPI_BASE_ADDR, - .io_pg_offst = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX21_PHYS_OFFSET + 0x100, .map_io = mx21ads_map_io, .init_irq = mx21_init_irq, diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index e66ffaa1c26c..b8bbd31aa850 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -33,7 +33,7 @@ #include "devices-imx27.h" #include "devices.h" -static unsigned int mx27pdk_pins[] = { +static const int mx27pdk_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -64,10 +64,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct platform_device *platform_devices[] __initdata = { - &mxc_fec_device, -}; - /* * Matrix keyboard */ @@ -94,7 +90,7 @@ static void __init mx27pdk_init(void) mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); imx27_add_imx_uart0(&uart_pdata); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx27_add_fec(NULL); mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data); } @@ -109,8 +105,6 @@ static struct sys_timer mx27pdk_timer = { MACHINE_START(MX27_3DS, "Freescale MX27PDK") /* maintainer: Freescale Semiconductor, Inc. */ - .phys_io = MX27_AIPI_BASE_ADDR, - .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 9c77da98a10e..a1e4bc573afc 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -66,7 +66,7 @@ /* to determine the correct external crystal reference */ #define CKIH_27MHZ_BIT_SET (1 << 3) -static unsigned int mx27ads_pins[] = { +static const int mx27ads_pins[] __initconst = { /* UART0 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -284,7 +284,6 @@ static struct imxmmc_platform_data sdhc2_pdata = { static struct platform_device *platform_devices[] __initdata = { &mx27ads_nor_mtd_device, - &mxc_fec_device, &mxc_w1_master_device, }; @@ -308,11 +307,12 @@ static void __init mx27ads_board_init(void) /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, mx27ads_i2c_devices, ARRAY_SIZE(mx27ads_i2c_devices)); - imx27_add_i2c_imx1(&mx27ads_i2c1_data); + imx27_add_imx_i2c(1, &mx27ads_i2c1_data); mxc_register_device(&mxc_fb_device, &mx27ads_fb_data); mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata); + imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } @@ -347,8 +347,6 @@ static void __init mx27ads_map_io(void) MACHINE_START(MX27ADS, "Freescale i.MX27ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .phys_io = MX27_AIPI_BASE_ADDR, - .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27ads_map_io, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index a3a1e452d4c5..38d3a4ae17c7 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -37,7 +37,7 @@ #include "devices-imx27.h" #include "devices.h" -static unsigned int mxt_td60_pins[] __initdata = { +static const int mxt_td60_pins[] __initconst = { /* UART0 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -231,10 +231,6 @@ static struct imxmmc_platform_data sdhc1_pdata = { .exit = mxt_td60_sdhc1_exit, }; -static struct platform_device *platform_devices[] __initdata = { - &mxc_fec_device, -}; - static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -255,12 +251,11 @@ static void __init mxt_td60_board_init(void) i2c_register_board_info(1, mxt_td60_i2c2_devices, ARRAY_SIZE(mxt_td60_i2c2_devices)); - imx27_add_i2c_imx0(&mxt_td60_i2c0_data); - imx27_add_i2c_imx1(&mxt_td60_i2c1_data); + imx27_add_imx_i2c(0, &mxt_td60_i2c0_data); + imx27_add_imx_i2c(1, &mxt_td60_i2c1_data); mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data); mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx27_add_fec(NULL); } static void __init mxt_td60_timer_init(void) @@ -274,8 +269,6 @@ static struct sys_timer mxt_td60_timer = { MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") /* maintainer: Maxtrack Industrial */ - .phys_io = MX27_AIPI_BASE_ADDR, - .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 23c9e1f37b9c..8c720d44602a 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -38,7 +38,6 @@ #include <mach/iomux-mx27.h> #include <asm/mach/time.h> #include <mach/audmux.h> -#include <mach/ssi.h> #include <mach/mxc_nand.h> #include <mach/irqs.h> #include <mach/mmc.h> @@ -55,7 +54,7 @@ #define SPI1_SS1 (GPIO_PORTD + 27) #define SD2_CD (GPIO_PORTC + 29) -static int pca100_pins[] = { +static const int pca100_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -174,7 +173,6 @@ pca100_nand_board_info __initconst = { static struct platform_device *platform_devices[] __initdata = { &mxc_w1_master_device, - &mxc_fec_device, &mxc_wdt, }; @@ -193,11 +191,9 @@ static struct i2c_board_info pca100_i2c_devices[] = { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, }, { - I2C_BOARD_INFO("rtc-pcf8563", 0x51), - .type = "pcf8563" + I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("lm75", 0x4a), - .type = "lm75" } }; @@ -252,7 +248,7 @@ static void pca100_ac97_cold_reset(struct snd_ac97 *ac97) msleep(2); } -static struct imx_ssi_platform_data pca100_ssi_pdata = { +static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = { .ac97_reset = pca100_ac97_cold_reset, .ac97_warm_reset = pca100_ac97_warm_reset, .flags = IMX_SSI_USE_AC97, @@ -389,7 +385,7 @@ static void __init pca100_init(void) if (ret) printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); - mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata); + imx27_add_imx_ssi(0, &pca100_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); @@ -401,7 +397,7 @@ static void __init pca100_init(void) i2c_register_board_info(1, pca100_i2c_devices, ARRAY_SIZE(pca100_i2c_devices)); - imx27_add_i2c_imx1(&pca100_i2c1_data); + imx27_add_imx_i2c(1, &pca100_i2c1_data); #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); @@ -436,6 +432,7 @@ static void __init pca100_init(void) mxc_register_device(&mxc_fb_device, &pca100_fb_data); + imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } @@ -449,8 +446,6 @@ static struct sys_timer pca100_timer = { }; MACHINE_START(PCA100, "phyCARD-i.MX27") - .phys_io = MX27_AIPI_BASE_ADDR, - .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 9212e8f37001..49a97ce07426 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -43,7 +43,7 @@ #include "devices-imx27.h" #include "devices.h" -static int pcm038_pins[] = { +static const int pcm038_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -173,7 +173,6 @@ pcm038_nand_board_info __initconst = { static struct platform_device *platform_devices[] __initdata = { &pcm038_nor_mtd_device, &mxc_w1_master_device, - &mxc_fec_device, &pcm038_sram_mtd_device, &mxc_wdt, }; @@ -257,7 +256,7 @@ static struct regulator_init_data cam_data = { .consumer_supplies = cam_consumers, }; -struct mc13783_regulator_init_data pcm038_regulators[] = { +static struct mc13783_regulator_init_data pcm038_regulators[] = { { .id = MC13783_REGU_VCAM, .init_data = &cam_data, @@ -309,7 +308,7 @@ static void __init pcm038_init(void) i2c_register_board_info(1, pcm038_i2c_devices, ARRAY_SIZE(pcm038_i2c_devices)); - imx27_add_i2c_imx1(&pcm038_i2c1_data); + imx27_add_imx_i2c(1, &pcm038_i2c1_data); /* PE18 for user-LED D40 */ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); @@ -325,6 +324,7 @@ static void __init pcm038_init(void) mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #ifdef CONFIG_MACH_PCM970_BASEBOARD @@ -342,8 +342,6 @@ static struct sys_timer pcm038_timer = { }; MACHINE_START(PCM038, "phyCORE-i.MX27") - .phys_io = MX27_AIPI_BASE_ADDR, - .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index 88bf0d1e26e6..1fbdd3faa7ab 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -95,7 +95,7 @@ static struct platform_device dm9000x_device = { } }; -static int mxc_uart1_pins[] = { +static const int mxc_uart1_pins[] = { PC9_PF_UART1_CTS, PC10_PF_UART1_RTS, PC11_PF_UART1_TXD, @@ -147,8 +147,6 @@ static struct sys_timer scb9328_timer = { MACHINE_START(SCB9328, "Synertronixx scb9328") /* Sascha Hauer */ - .phys_io = 0x00200000, - .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, .boot_params = 0x08000100, .map_io = mx1_map_io, .init_irq = mx1_init_irq, diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c index f490a406d57e..9110d9cca7a2 100644 --- a/arch/arm/mach-imx/pcm970-baseboard.c +++ b/arch/arm/mach-imx/pcm970-baseboard.c @@ -31,7 +31,7 @@ #include "devices.h" -static int pcm970_pins[] = { +static const int pcm970_pins[] __initconst = { /* SDHC */ PB4_PF_SD2_D0, PB5_PF_SD2_D1, @@ -200,7 +200,7 @@ static struct resource pcm970_sja1000_resources[] = { }, }; -struct sja1000_platform_data pcm970_sja1000_platform_data = { +static struct sja1000_platform_data pcm970_sja1000_platform_data = { .osc_freq = 16000000, .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL, .cdr = CDR_CBP, diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S index 87a6888ae011..a1f598fd3a56 100644 --- a/arch/arm/mach-integrator/include/mach/debug-macro.S +++ b/arch/arm/mach-integrator/include/mach/debug-macro.S @@ -11,12 +11,10 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x16000000 @ physical base address - movne \rx, #0xf0000000 @ virtual base - addne \rx, \rx, #0x16000000 >> 4 + .macro addruart, rp, rv + mov \rp, #0x16000000 @ physical base address + mov \rv, #0xf0000000 @ virtual base + add \rv, \rv, #0x16000000 >> 4 .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h index e87ab0b37bdd..e056e7cf5645 100644 --- a/arch/arm/mach-integrator/include/mach/vmalloc.h +++ b/arch/arm/mach-integrator/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 6ab5a03ab9d8..548208f11179 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -500,8 +500,6 @@ static struct sys_timer ap_timer = { MACHINE_START(INTEGRATOR, "ARM-Integrator") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = 0x16000000, - .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = ap_map_io, .reserve = integrator_reserve, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 05db40e3c4f7..6258c90d020c 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -599,8 +599,6 @@ static struct sys_timer cp_timer = { MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = 0x16000000, - .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = intcp_map_io, .reserve = integrator_reserve, diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S index c9d6ba46963d..e664466d51bf 100644 --- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S +++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S @@ -11,15 +11,13 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - moveq \rx, #0xff000000 @ physical - orreq \rx, \rx, #0x00d80000 - movne \rx, #0xfe000000 @ virtual - orrne \rx, \rx, #0x00e80000 - orr \rx, \rx, #0x00002300 - orr \rx, \rx, #0x00000040 + .macro addruart, rp, rv + mov \rp, #0x00002300 + orr \rp, \rp, #0x00000040 + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00e80000 + orr \rp, \rp, #0xff000000 @ physical + orr \rp, \rp, #0x00d80000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index f91f3154577d..9b5a63f5d07d 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -91,8 +91,6 @@ static struct sys_timer iq81340mc_timer = { MACHINE_START(IQ81340MC, "Intel IQ81340MC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ - .phys_io = IOP13XX_PMMR_PHYS_MEM_BASE, - .io_pg_offst = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index ddb7a3435de9..df3492a9c280 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -93,8 +93,6 @@ static struct sys_timer iq81340sc_timer = { MACHINE_START(IQ81340SC, "Intel IQ81340SC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ - .phys_io = IOP13XX_PMMR_PHYS_MEM_BASE, - .io_pg_offst = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index 2bef9b6e1cc9..779f924af302 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -203,8 +203,6 @@ static void __init em7210_init_machine(void) } MACHINE_START(EM7210, "Lanner EM7210") - .phys_io = IQ31244_UART, - .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = em7210_map_io, .init_irq = iop32x_init_irq, diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 10384fc37cb2..c6b6f9c5650d 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -207,8 +207,6 @@ static void __init glantank_init_machine(void) MACHINE_START(GLANTANK, "GLAN Tank") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = GLANTANK_UART, - .io_pg_offst = ((GLANTANK_UART) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = glantank_map_io, .init_irq = iop32x_init_irq, diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S index 736afe1edd1f..ff9e76c09f35 100644 --- a/arch/arm/mach-iop32x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S @@ -11,9 +11,10 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mov \rx, #0xfe000000 @ physical as well as virtual - orr \rx, \rx, #0x00800000 @ location of the UART + .macro addruart, rp, rv + mov \rp, #0xfe000000 @ physical as well as virtual + orr \rp, \rp, #0x00800000 @ location of the UART + mov \rv, \rp .endm #define UART_SHIFT 0 diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index d6ac85ff109d..fde962c057f0 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -313,8 +313,6 @@ __setup("force_ep80219", force_ep80219_setup); MACHINE_START(IQ31244, "Intel IQ31244") /* Maintainer: Intel Corp. */ - .phys_io = IQ31244_UART, - .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = iq31244_map_io, .init_irq = iop32x_init_irq, @@ -329,8 +327,6 @@ MACHINE_END */ MACHINE_START(EP80219, "Intel EP80219") /* Maintainer: Intel Corp. */ - .phys_io = IQ31244_UART, - .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = iq31244_map_io, .init_irq = iop32x_init_irq, diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index c6a0e4ee9d91..3a95950e8737 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -186,8 +186,6 @@ static void __init iq80321_init_machine(void) MACHINE_START(IQ80321, "Intel IQ80321") /* Maintainer: Intel Corp. */ - .phys_io = IQ80321_UART, - .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = iq80321_map_io, .init_irq = iop32x_init_irq, diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index f108a31afc2b..626aa375915d 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -327,8 +327,6 @@ static void __init n2100_init_machine(void) MACHINE_START(N2100, "Thecus N2100") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = N2100_UART, - .io_pg_offst = ((N2100_UART) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = n2100_map_io, .init_irq = iop32x_init_irq, diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S index addb2da78422..40c500dd1fac 100644 --- a/arch/arm/mach-iop33x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S @@ -11,13 +11,11 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - moveq \rx, #0xff000000 @ physical - movne \rx, #0xfe000000 @ virtual - orr \rx, \rx, #0x00ff0000 - orr \rx, \rx, #0x0000f700 + .macro addruart, rp, rv + mov \rp, #0x00ff0000 + orr \rp, \rp, #0x0000f700 + orr \rv, #0xfe000000 @ virtual + orr \rp, #0xff000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index c6ff5523b380..c565f8d1e3a4 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -141,8 +141,6 @@ static void __init iq80331_init_machine(void) MACHINE_START(IQ80331, "Intel IQ80331") /* Maintainer: Intel Corp. */ - .phys_io = 0xfefff000, - .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = iop3xx_map_io, .init_irq = iop33x_init_irq, diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index fbf551409394..36a9efb254c2 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -141,8 +141,6 @@ static void __init iq80332_init_machine(void) MACHINE_START(IQ80332, "Intel IQ80332") /* Maintainer: Intel Corp. */ - .phys_io = 0xfefff000, - .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = iop3xx_map_io, .init_irq = iop33x_init_irq, diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 1a557e0d055b..88663ab1d2ad 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -253,8 +253,6 @@ static void __init enp2611_init_machine(void) MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = IXP2000_UART_PHYS_BASE, - .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = enp2611_map_io, .init_irq = ixp2000_init_irq, diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S index 6a827681680f..0ef533b20972 100644 --- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S @@ -11,16 +11,14 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xc0000000 @ Physical base - movne \rx, #0xfe000000 @ virtual base - orrne \rx, \rx, #0x00f00000 - orr \rx, \rx, #0x00030000 + .macro addruart, rp, rv + mov \rp, #0x00030000 #ifdef __ARMEB__ - orr \rx, \rx, #0x00000003 + orr \rp, \rp, #0x00000003 #endif + orr \rv, \rp, #0xfe000000 @ virtual base + orr \rv, \rv, #0x00f00000 + orr \rp, \rp, #0xc0000000 @ Physical base .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index 55e5c69352ad..dfffc1e817fa 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -170,8 +170,6 @@ void __init ixdp2400_init_irq(void) MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP2000_UART_PHYS_BASE, - .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = ixdp2x00_map_io, .init_irq = ixdp2400_init_irq, diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index 237b61a85e9a..cd4c9bcff2b5 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -285,8 +285,6 @@ void __init ixdp2800_init_irq(void) MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP2000_UART_PHYS_BASE, - .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = ixdp2x00_map_io, .init_irq = ixdp2800_init_irq, diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 0369ec4242a6..6c121bdbe311 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -416,8 +416,6 @@ static void __init ixdp2x01_init_machine(void) #ifdef CONFIG_ARCH_IXDP2401 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP2000_UART_PHYS_BASE, - .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = ixdp2x01_map_io, .init_irq = ixdp2x01_init_irq, @@ -429,8 +427,6 @@ MACHINE_END #ifdef CONFIG_ARCH_IXDP2801 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP2000_UART_PHYS_BASE, - .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = ixdp2x01_map_io, .init_irq = ixdp2x01_init_irq, @@ -444,8 +440,6 @@ MACHINE_END */ MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP2000_UART_PHYS_BASE, - .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = ixdp2x01_map_io, .init_irq = ixdp2x01_init_irq, diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c index 1c06bfc5a7ef..e25e5fe183ba 100644 --- a/arch/arm/mach-ixp23xx/espresso.c +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -85,8 +85,6 @@ static void __init espresso_init(void) MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso") /* Maintainer: Lennert Buytenhek */ - .phys_io = IXP23XX_PERIPHERAL_PHYS, - .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, .map_io = ixp23xx_map_io, .init_irq = ixp23xx_init_irq, .timer = &ixp23xx_timer, diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S index a82e375465e2..f7c6eef7fa22 100644 --- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S @@ -12,13 +12,12 @@ */ #include <mach/ixp23xx.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical - ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual + .macro addruart, rp, rv + ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical + ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual #ifdef __ARMEB__ - orr \rx, \rx, #0x00000003 + orr \rp, \rp, #0x00000003 + orr \rv, \rv, #0x00000003 #endif .endm diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index f1b124a709ab..664e39c2a903 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -328,8 +328,6 @@ static void __init ixdp2351_init(void) MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP23XX_PERIPHERAL_PHYS, - .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, .map_io = ixdp2351_map_io, .init_irq = ixdp2351_init_irq, .timer = &ixp23xx_timer, diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index 6d38d769761c..76c61ba73218 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -171,8 +171,6 @@ static void __init roadrunner_init(void) MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform") /* Maintainer: Deepak Saxena */ - .phys_io = IXP23XX_PERIPHERAL_PHYS, - .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, .map_io = ixp23xx_map_io, .init_irq = ixp23xx_init_irq, .timer = &ixp23xx_timer, diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index d8bc86d76f1d..73745ff102d5 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -164,8 +164,6 @@ static void __init avila_init(void) MACHINE_START(AVILA, "Gateworks Avila Network Platform") /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, @@ -181,8 +179,6 @@ MACHINE_END #ifdef CONFIG_MACH_LOFT MACHINE_START(LOFT, "Giant Shoulder Inc Loft board") /* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 31a47f6a8939..355e3de38733 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -109,8 +109,6 @@ static void __init coyote_init(void) #ifdef CONFIG_ARCH_ADI_COYOTE MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, @@ -126,8 +124,6 @@ MACHINE_END #ifdef CONFIG_MACH_IXDPG425 MACHINE_START(IXDPG425, "Intel IXDPG425") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 7c1fa54a6145..d398229cfaa5 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -279,8 +279,6 @@ static void __init dsmg600_init(void) MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") /* Maintainer: www.nslu2-linux.org */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, .boot_params = 0x00000100, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index e7f4befba422..727ee39ce11c 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -270,8 +270,6 @@ static void __init fsg_init(void) MACHINE_START(FSG, "Freecom FSG-3") /* Maintainer: www.nslu2-linux.org */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index 2583b2a13174..9dc0b4eaa65a 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -96,8 +96,6 @@ static void __init gateway7001_init(void) #ifdef CONFIG_MACH_GATEWAY7001 MACHINE_START(GATEWAY7001, "Gateway 7001 AP") /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index 1c28048209c1..d0e4861ac03d 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -496,8 +496,6 @@ subsys_initcall(gmlr_pci_init); MACHINE_START(GORAMO_MLR, "MultiLink") /* Maintainer: Krzysztof Halasa */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index c67586b79400..77abead36227 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -164,8 +164,6 @@ static void __init gtwx5715_init(void) MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") /* Maintainer: George Joseph */ - .phys_io = IXP4XX_UART2_BASE_PHYS, - .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index 3fc66d6d00a0..b974a49c0aff 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -10,16 +10,16 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xc8000000 - movne \rx, #0xff000000 - orrne \rx, \rx, #0x00b00000 + .macro addruart, rp, rv #ifdef __ARMEB__ - add \rx,\rx,#3 @ Uart regs are at off set of 3 if - @ byte writes used - Big Endian. + mov \rp, #3 @ Uart regs are at off set of 3 if + @ byte writes used - Big Endian. +#else + mov \rp, #0 #endif + orr \rv, \rp, #0xff000000 @ virtual + orr \rv, \rv, #0x00b00000 + orr \rp, \rp, #0xc8000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index ea9ee4ed0a3e..140783386785 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -257,8 +257,6 @@ static void __init ixdp425_init(void) #ifdef CONFIG_ARCH_IXDP425 MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, @@ -270,8 +268,6 @@ MACHINE_END #ifdef CONFIG_MACH_IXDP465 MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, @@ -283,8 +279,6 @@ MACHINE_END #ifdef CONFIG_ARCH_PRPMC1100 MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, @@ -296,8 +290,6 @@ MACHINE_END #ifdef CONFIG_MACH_KIXRP435 MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index e3ee880aa1e6..f18fee748878 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -314,8 +314,6 @@ static void __init nas100d_init(void) MACHINE_START(NAS100D, "Iomega NAS 100d") /* Maintainer: www.nslu2-linux.org */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, .boot_params = 0x00000100, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index c14e0034be4b..f79b62eb7614 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -300,8 +300,6 @@ static void __init nslu2_init(void) MACHINE_START(NSLU2, "Linksys NSLU2") /* Maintainer: www.nslu2-linux.org */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, .boot_params = 0x00000100, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index 465cc5cce687..4e72cfdd3c46 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -236,8 +236,6 @@ static void __init vulcan_init(void) MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") /* Maintainer: Marc Zyngier <maz@misterjones.org> */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index 4dd74863daa9..5d148c7bc4fb 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -97,8 +97,6 @@ static void __init wg302v2_init(void) #ifdef CONFIG_MACH_WG302V2 MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index cc25501b57fa..34106335c728 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -58,6 +58,12 @@ config MACH_TS41X QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS devices. +config MACH_DOCKSTAR + bool "Seagate FreeAgent DockStar" + help + Say 'Y' here if you want your kernel to support the + Seagate FreeAgent DockStar. + config MACH_OPENRD bool @@ -100,6 +106,12 @@ config MACH_NETSPACE_MAX_V2 Say 'Y' here if you want your kernel to support the LaCie Network Space Max v2 NAS. +config MACH_D2NET_V2 + bool "LaCie d2 Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie d2 Network v2 NAS. + config MACH_NET2BIG_V2 bool "LaCie 2Big Network v2 NAS Board" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 295d7baa6ae1..5dcaa81a2ec3 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -7,14 +7,16 @@ obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o +obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o -obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o -obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o -obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o -obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o +obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c new file mode 100644 index 000000000000..4aa86e4a152c --- /dev/null +++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c @@ -0,0 +1,229 @@ +/* + * arch/arm/mach-kirkwood/d2net_v2-setup.c + * + * LaCie d2 Network Space v2 Board Setup + * + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include <mach/leds-ns2.h> +#include "common.h" +#include "mpp.h" +#include "lacie_v2-common.h" + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data d2net_v2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data d2net_v2_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define D2NET_V2_GPIO_PUSH_BUTTON 34 +#define D2NET_V2_GPIO_POWER_SWITCH_ON 13 +#define D2NET_V2_GPIO_POWER_SWITCH_OFF 15 + +#define D2NET_V2_SWITCH_POWER_ON 0x1 +#define D2NET_V2_SWITCH_POWER_OFF 0x2 + +static struct gpio_keys_button d2net_v2_buttons[] = { + [0] = { + .type = EV_SW, + .code = D2NET_V2_SWITCH_POWER_ON, + .gpio = D2NET_V2_GPIO_POWER_SWITCH_ON, + .desc = "Back power switch (on|auto)", + .active_low = 0, + }, + [1] = { + .type = EV_SW, + .code = D2NET_V2_SWITCH_POWER_OFF, + .gpio = D2NET_V2_GPIO_POWER_SWITCH_OFF, + .desc = "Back power switch (auto|off)", + .active_low = 0, + }, + [2] = { + .code = KEY_POWER, + .gpio = D2NET_V2_GPIO_PUSH_BUTTON, + .desc = "Front Push Button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data d2net_v2_button_data = { + .buttons = d2net_v2_buttons, + .nbuttons = ARRAY_SIZE(d2net_v2_buttons), +}; + +static struct platform_device d2net_v2_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &d2net_v2_button_data, + }, +}; + +/***************************************************************************** + * GPIO LEDs + ****************************************************************************/ + +#define D2NET_V2_GPIO_RED_LED 12 + +static struct gpio_led d2net_v2_gpio_led_pins[] = { + { + .name = "d2net_v2:red:fail", + .gpio = D2NET_V2_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data d2net_v2_gpio_leds_data = { + .num_leds = ARRAY_SIZE(d2net_v2_gpio_led_pins), + .leds = d2net_v2_gpio_led_pins, +}; + +static struct platform_device d2net_v2_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &d2net_v2_gpio_leds_data, + }, +}; + +/***************************************************************************** + * Dual-GPIO CPLD LEDs + ****************************************************************************/ + +#define D2NET_V2_GPIO_BLUE_LED_SLOW 29 +#define D2NET_V2_GPIO_BLUE_LED_CMD 30 + +static struct ns2_led d2net_v2_led_pins[] = { + { + .name = "d2net_v2:blue:sata", + .cmd = D2NET_V2_GPIO_BLUE_LED_CMD, + .slow = D2NET_V2_GPIO_BLUE_LED_SLOW, + }, +}; + +static struct ns2_led_platform_data d2net_v2_leds_data = { + .num_leds = ARRAY_SIZE(d2net_v2_led_pins), + .leds = d2net_v2_led_pins, +}; + +static struct platform_device d2net_v2_leds = { + .name = "leds-ns2", + .id = -1, + .dev = { + .platform_data = &d2net_v2_leds_data, + }, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static unsigned int d2net_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Request power-off */ + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP13_GPIO, /* Rear power switch (on|auto) */ + MPP14_GPIO, /* USB fuse */ + MPP15_GPIO, /* Rear power switch (auto|off) */ + MPP16_GPIO, /* SATA 0 power */ + MPP21_SATA0_ACTn, + MPP24_GPIO, /* USB mode select */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP34_GPIO, /* Power button (1 = Released, 0 = Pushed) */ + MPP35_GPIO, /* Inhibit power-off */ + 0 +}; + +#define D2NET_V2_GPIO_POWER_OFF 7 + +static void d2net_v2_power_off(void) +{ + gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1); +} + +static void __init d2net_v2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(d2net_v2_mpp_config); + + lacie_v2_hdd_power_init(1); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&d2net_v2_ge00_data); + kirkwood_sata_init(&d2net_v2_sata_data); + kirkwood_uart0_init(); + lacie_v2_register_flash(); + lacie_v2_register_i2c_devices(); + + platform_device_register(&d2net_v2_leds); + platform_device_register(&d2net_v2_gpio_leds); + platform_device_register(&d2net_v2_gpio_buttons); + + if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = d2net_v2_power_off; + else + pr_err("d2net_v2: failed to configure power-off GPIO\n"); +} + +MACHINE_START(D2NET_V2, "LaCie d2 Network v2") + .boot_params = 0x00000100, + .init_machine = d2net_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &lacie_v2_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index 16f6691e7c68..9ea71182d31a 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -97,8 +97,6 @@ subsys_initcall(db88f6281_pci_init); MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = db88f6281_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c new file mode 100644 index 000000000000..433ea368c060 --- /dev/null +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -0,0 +1,110 @@ +/* + * arch/arm/mach-kirkwood/dockstar-setup.c + * + * Seagate FreeAgent DockStar Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mtd/partitions.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mtd_partition dockstar_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data dockstar_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct gpio_led dockstar_led_pins[] = { + { + .name = "dockstar:green:health", + .default_trigger = "default-on", + .gpio = 46, + .active_low = 1, + }, + { + .name = "dockstar:orange:misc", + .default_trigger = "none", + .gpio = 47, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dockstar_led_data = { + .leds = dockstar_led_pins, + .num_leds = ARRAY_SIZE(dockstar_led_pins), +}; + +static struct platform_device dockstar_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dockstar_led_data, + } +}; + +static unsigned int dockstar_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP46_GPIO, /* LED green */ + MPP47_GPIO, /* LED orange */ + 0 +}; + +static void __init dockstar_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(dockstar_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&dockstar_ge00_data); + + platform_device_register(&dockstar_leds); +} + +MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") + .boot_params = 0x00000100, + .init_machine = dockstar_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 54d07c89d4ff..8f47dc0a2fef 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -121,8 +121,6 @@ static void __init guruplug_init(void) MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") /* Maintainer: Siddarth Gore <gores@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = guruplug_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index d0606774dea7..db06ae437d08 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include <mach/bridge-regs.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE - ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =KIRKWOOD_REGS_PHYS_BASE + ldr \rv, =KIRKWOOD_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h new file mode 100644 index 000000000000..24b536ebdf13 --- /dev/null +++ b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h @@ -0,0 +1,55 @@ +/* + * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h + * + * Platform data structure for netxbig LED driver + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_LEDS_NETXBIG_H +#define __MACH_LEDS_NETXBIG_H + +struct netxbig_gpio_ext { + unsigned *addr; + int num_addr; + unsigned *data; + int num_data; + unsigned enable; +}; + +enum netxbig_led_mode { + NETXBIG_LED_OFF, + NETXBIG_LED_ON, + NETXBIG_LED_SATA, + NETXBIG_LED_TIMER1, + NETXBIG_LED_TIMER2, + NETXBIG_LED_MODE_NUM, +}; + +#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM + +struct netxbig_led_timer { + unsigned long delay_on; + unsigned long delay_off; + enum netxbig_led_mode mode; +}; + +struct netxbig_led { + const char *name; + const char *default_trigger; + int mode_addr; + int *mode_val; + int bright_addr; +}; + +struct netxbig_led_platform_data { + struct netxbig_gpio_ext *gpio_ext; + struct netxbig_led_timer *timer; + int num_timer; + struct netxbig_led *leds; + int num_leds; +}; + +#endif /* __MACH_LEDS_NETXBIG_H */ diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c new file mode 100644 index 000000000000..d3ea1b6c8a02 --- /dev/null +++ b/arch/arm/mach-kirkwood/lacie_v2-common.c @@ -0,0 +1,127 @@ +/* + * arch/arm/mach-kirkwood/lacie_v2-common.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/gpio.h> +#include <asm/mach/time.h> +#include <mach/kirkwood.h> +#include <mach/irqs.h> +#include <plat/time.h> +#include "common.h" + +/***************************************************************************** + * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) + ****************************************************************************/ + +static struct mtd_partition lacie_v2_flash_parts[] = { + { + .name = "u-boot", + .size = MTDPART_SIZ_FULL, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, +}; + +static const struct flash_platform_data lacie_v2_flash = { + .type = "mx25l4005a", + .name = "spi_flash", + .parts = lacie_v2_flash_parts, + .nr_parts = ARRAY_SIZE(lacie_v2_flash_parts), +}; + +static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &lacie_v2_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +void __init lacie_v2_register_flash(void) +{ + spi_register_board_info(lacie_v2_spi_slave_info, + ARRAY_SIZE(lacie_v2_spi_slave_info)); + kirkwood_spi_init(); +} + +/***************************************************************************** + * I2C devices + ****************************************************************************/ + +static struct at24_platform_data at24c04 = { + .byte_len = SZ_4K / 8, + .page_size = 16, +}; + +/* + * i2c addr | chip | description + * 0x50 | HT24LC04 | eeprom (512B) + */ + +static struct i2c_board_info __initdata lacie_v2_i2c_info[] = { + { + I2C_BOARD_INFO("24c04", 0x50), + .platform_data = &at24c04, + } +}; + +void __init lacie_v2_register_i2c_devices(void) +{ + kirkwood_i2c_init(); + i2c_register_board_info(0, lacie_v2_i2c_info, + ARRAY_SIZE(lacie_v2_i2c_info)); +} + +/***************************************************************************** + * Hard Disk power + ****************************************************************************/ + +static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 }; + +void __init lacie_v2_hdd_power_init(int hdd_num) +{ + int i; + int err; + + /* Power up all hard disks. */ + for (i = 0; i < hdd_num; i++) { + err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL); + if (err == 0) { + err = gpio_direction_output( + lacie_v2_gpio_hdd_power[i], 1); + /* Free the HDD power GPIOs. This allow user-space to + * configure them via the gpiolib sysfs interface. */ + gpio_free(lacie_v2_gpio_hdd_power[i]); + } + if (err) + pr_err("Failed to power up HDD%d\n", i + 1); + } +} + +/***************************************************************************** + * Timer + ****************************************************************************/ + +static void lacie_v2_timer_init(void) +{ + kirkwood_tclk = 166666667; + orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); +} + +struct sys_timer lacie_v2_timer = { + .init = lacie_v2_timer_init, +}; diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h new file mode 100644 index 000000000000..af521315b87b --- /dev/null +++ b/arch/arm/mach-kirkwood/lacie_v2-common.h @@ -0,0 +1,18 @@ +/* + * arch/arm/mach-kirkwood/lacie_v2-common.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H +#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H + +void lacie_v2_register_flash(void); +void lacie_v2_register_i2c_devices(void); +void lacie_v2_hdd_power_init(int hdd_num); + +extern struct sys_timer lacie_v2_timer; + +#endif diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index c6b92b42eb4e..1e5266f57e2a 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -163,8 +163,6 @@ subsys_initcall(mv88f6281gtw_ge_pci_init); MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = mv88f6281gtw_ge_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index d26bf324738b..5e286441b8f4 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -24,56 +24,19 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/i2c.h> -#include <linux/i2c/at24.h> #include <linux/input.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> #include <mach/kirkwood.h> #include <mach/leds-ns2.h> -#include <plat/time.h> #include "common.h" #include "mpp.h" - -/***************************************************************************** - * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) - ****************************************************************************/ - -static struct mtd_partition netspace_v2_flash_parts[] = { - { - .name = "u-boot", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, -}; - -static const struct flash_platform_data netspace_v2_flash = { - .type = "mx25l4005a", - .name = "spi_flash", - .parts = netspace_v2_flash_parts, - .nr_parts = ARRAY_SIZE(netspace_v2_flash_parts), -}; - -static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &netspace_v2_flash, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; +#include "lacie_v2-common.h" /***************************************************************************** * Ethernet @@ -84,27 +47,6 @@ static struct mv643xx_eth_platform_data netspace_v2_ge00_data = { }; /***************************************************************************** - * I2C devices - ****************************************************************************/ - -static struct at24_platform_data at24c04 = { - .byte_len = SZ_4K / 8, - .page_size = 16, -}; - -/* - * i2c addr | chip | description - * 0x50 | HT24LC04 | eeprom (512B) - */ - -static struct i2c_board_info __initdata netspace_v2_i2c_info[] = { - { - I2C_BOARD_INFO("24c04", 0x50), - .platform_data = &at24c04, - } -}; - -/***************************************************************************** * SATA ****************************************************************************/ @@ -112,35 +54,6 @@ static struct mv_sata_platform_data netspace_v2_sata_data = { .n_ports = 2, }; -#define NETSPACE_V2_GPIO_SATA0_POWER 16 -#define NETSPACE_V2_GPIO_SATA1_POWER 17 - -static void __init netspace_v2_sata_power_init(void) -{ - int err; - - err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power"); - if (err == 0) { - err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1); - if (err) - gpio_free(NETSPACE_V2_GPIO_SATA0_POWER); - } - if (err) - pr_err("netspace_v2: failed to setup SATA0 power\n"); - - if (machine_is_netspace_max_v2()) { - err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power"); - if (err == 0) { - err = gpio_direction_output( - NETSPACE_V2_GPIO_SATA1_POWER, 1); - if (err) - gpio_free(NETSPACE_V2_GPIO_SATA1_POWER); - } - if (err) - pr_err("netspace_v2: failed to setup SATA1 power\n"); - } -} - /***************************************************************************** * GPIO keys ****************************************************************************/ @@ -224,20 +137,6 @@ static struct platform_device netspace_v2_leds = { }; /***************************************************************************** - * Timer - ****************************************************************************/ - -static void netspace_v2_timer_init(void) -{ - kirkwood_tclk = 166666667; - orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); -} - -struct sys_timer netspace_v2_timer = { - .init = netspace_v2_timer_init, -}; - -/***************************************************************************** * General Setup ****************************************************************************/ @@ -291,18 +190,17 @@ static void __init netspace_v2_init(void) kirkwood_init(); kirkwood_mpp_conf(netspace_v2_mpp_config); - netspace_v2_sata_power_init(); + if (machine_is_netspace_max_v2()) + lacie_v2_hdd_power_init(2); + else + lacie_v2_hdd_power_init(1); kirkwood_ehci_init(); kirkwood_ge00_init(&netspace_v2_ge00_data); kirkwood_sata_init(&netspace_v2_sata_data); kirkwood_uart0_init(); - spi_register_board_info(netspace_v2_spi_slave_info, - ARRAY_SIZE(netspace_v2_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_i2c_init(); - i2c_register_board_info(0, netspace_v2_i2c_info, - ARRAY_SIZE(netspace_v2_i2c_info)); + lacie_v2_register_flash(); + lacie_v2_register_i2c_devices(); platform_device_register(&netspace_v2_leds); platform_device_register(&netspace_v2_gpio_leds); @@ -317,36 +215,30 @@ static void __init netspace_v2_init(void) #ifdef CONFIG_MACH_NETSPACE_V2 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &netspace_v2_timer, + .timer = &lacie_v2_timer, MACHINE_END #endif #ifdef CONFIG_MACH_INETSPACE_V2 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &netspace_v2_timer, + .timer = &lacie_v2_timer, MACHINE_END #endif #ifdef CONFIG_MACH_NETSPACE_MAX_V2 MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &netspace_v2_timer, + .timer = &lacie_v2_timer, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index 2bd14c5079de..a1b45d501aef 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -23,55 +23,19 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/i2c.h> -#include <linux/i2c/at24.h> #include <linux/input.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> #include <mach/kirkwood.h> -#include <plat/time.h> +#include <mach/leds-netxbig.h> #include "common.h" #include "mpp.h" - -/***************************************************************************** - * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) - ****************************************************************************/ - -static struct mtd_partition netxbig_v2_flash_parts[] = { - { - .name = "u-boot", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, -}; - -static const struct flash_platform_data netxbig_v2_flash = { - .type = "mx25l4005a", - .name = "spi_flash", - .parts = netxbig_v2_flash_parts, - .nr_parts = ARRAY_SIZE(netxbig_v2_flash_parts), -}; - -static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &netxbig_v2_flash, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; +#include "lacie_v2-common.h" /***************************************************************************** * Ethernet @@ -86,27 +50,6 @@ static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = { }; /***************************************************************************** - * I2C devices - ****************************************************************************/ - -static struct at24_platform_data at24c04 = { - .byte_len = SZ_4K / 8, - .page_size = 16, -}; - -/* - * i2c addr | chip | description - * 0x50 | HT24LC04 | eeprom (512B) - */ - -static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = { - { - I2C_BOARD_INFO("24c04", 0x50), - .platform_data = &at24c04, - } -}; - -/***************************************************************************** * SATA ****************************************************************************/ @@ -114,34 +57,6 @@ static struct mv_sata_platform_data netxbig_v2_sata_data = { .n_ports = 2, }; -static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 }; - -static void __init netxbig_v2_sata_power_init(void) -{ - int i; - int err; - int hdd_nb; - - if (machine_is_net2big_v2()) - hdd_nb = 2; - else - hdd_nb = 5; - - /* Power up all hard disks. */ - for (i = 0; i < hdd_nb; i++) { - err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL); - if (err == 0) { - err = gpio_direction_output( - netxbig_v2_gpio_hdd_power[i], 1); - /* Free the HDD power GPIOs. This allow user-space to - * configure them via the gpiolib sysfs interface. */ - gpio_free(netxbig_v2_gpio_hdd_power[i]); - } - if (err) - pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1); - } -} - /***************************************************************************** * GPIO keys ****************************************************************************/ @@ -190,7 +105,7 @@ static struct platform_device netxbig_v2_gpio_buttons = { }; /***************************************************************************** - * GPIO LEDs + * GPIO extension LEDs ****************************************************************************/ /* @@ -200,19 +115,32 @@ static struct platform_device netxbig_v2_gpio_buttons = { * - address register : bit [0-2] -> GPIO [47-49] * - data register : bit [0-2] -> GPIO [44-46] * - enable register : GPIO 29 - * + */ + +static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 }; +static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 }; + +static struct netxbig_gpio_ext netxbig_v2_gpio_ext = { + .addr = netxbig_v2_gpio_ext_addr, + .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr), + .data = netxbig_v2_gpio_ext_data, + .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data), + .enable = 29, +}; + +/* * Address register selection: * * addr | register * ---------------------------- * 0 | front LED * 1 | front LED brightness - * 2 | HDD LED brightness - * 3 | HDD1 LED - * 4 | HDD2 LED - * 5 | HDD3 LED - * 6 | HDD4 LED - * 7 | HDD5 LED + * 2 | SATA LED brightness + * 3 | SATA0 LED + * 4 | SATA1 LED + * 5 | SATA2 LED + * 6 | SATA3 LED + * 7 | SATA4 LED * * Data register configuration: * @@ -233,30 +161,107 @@ static struct platform_device netxbig_v2_gpio_buttons = { * 6 | blink blue on=1 sec and red on=1 sec * 7 | blink blue on=0.5 sec and blue off=2.5 sec * - * data | HDD LED mode + * data | SATA LED mode * ------------------------------------------------- - * 0 | fix blue on + * 0 | fix off * 1 | SATA activity blink * 2 | fix red on * 3 | blink blue on=1 sec and blue off=1 sec * 4 | blink red on=1 sec and red off=1 sec * 5 | blink blue on=2.5 sec and red on=0.5 sec * 6 | blink blue on=1 sec and red on=1 sec - * 7 | blink blue on=0.5 sec and blue off=2.5 sec + * 7 | fix blue on */ -/***************************************************************************** - * Timer - ****************************************************************************/ +static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = { + [NETXBIG_LED_OFF] = 0, + [NETXBIG_LED_ON] = 2, + [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, + [NETXBIG_LED_TIMER1] = 4, + [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, +}; -static void netxbig_v2_timer_init(void) -{ - kirkwood_tclk = 166666667; - orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); -} +static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = { + [NETXBIG_LED_OFF] = 0, + [NETXBIG_LED_ON] = 1, + [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, + [NETXBIG_LED_TIMER1] = 3, + [NETXBIG_LED_TIMER2] = 7, +}; + +static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = { + [NETXBIG_LED_OFF] = 0, + [NETXBIG_LED_ON] = 7, + [NETXBIG_LED_SATA] = 1, + [NETXBIG_LED_TIMER1] = 3, + [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, +}; + +static struct netxbig_led_timer netxbig_v2_led_timer[] = { + [0] = { + .delay_on = 500, + .delay_off = 500, + .mode = NETXBIG_LED_TIMER1, + }, + [1] = { + .delay_on = 500, + .delay_off = 1000, + .mode = NETXBIG_LED_TIMER2, + }, +}; + +#define NETXBIG_LED(_name, maddr, mval, baddr) \ + { .name = _name, \ + .mode_addr = maddr, \ + .mode_val = mval, \ + .bright_addr = baddr } + +static struct netxbig_led net2big_v2_leds_ctrl[] = { + NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), + NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1), + NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), + NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), +}; + +static struct netxbig_led_platform_data net2big_v2_leds_data = { + .gpio_ext = &netxbig_v2_gpio_ext, + .timer = netxbig_v2_led_timer, + .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), + .leds = net2big_v2_leds_ctrl, + .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl), +}; + +static struct netxbig_led net5big_v2_leds_ctrl[] = { + NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), + NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1), + NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2), +}; -struct sys_timer netxbig_v2_timer = { - .init = netxbig_v2_timer_init, +static struct netxbig_led_platform_data net5big_v2_leds_data = { + .gpio_ext = &netxbig_v2_gpio_ext, + .timer = netxbig_v2_led_timer, + .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), + .leds = net5big_v2_leds_ctrl, + .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl), +}; + +static struct platform_device netxbig_v2_leds = { + .name = "leds-netxbig", + .id = -1, + .dev = { + .platform_data = &net2big_v2_leds_data, + }, }; /***************************************************************************** @@ -284,18 +289,18 @@ static unsigned int net2big_v2_mpp_config[] __initdata = { MPP24_GPIO, /* USB mode select */ MPP26_GPIO, /* USB device vbus */ MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* CPLD extension ALE */ + MPP29_GPIO, /* GPIO extension ALE */ MPP34_GPIO, /* Rear Push button */ MPP35_GPIO, /* Inhibit switch power-off */ MPP36_GPIO, /* SATA HDD1 presence */ MPP37_GPIO, /* SATA HDD2 presence */ MPP40_GPIO, /* eSATA presence */ - MPP44_GPIO, /* CPLD extension (data 0) */ - MPP45_GPIO, /* CPLD extension (data 1) */ - MPP46_GPIO, /* CPLD extension (data 2) */ - MPP47_GPIO, /* CPLD extension (addr 0) */ - MPP48_GPIO, /* CPLD extension (addr 1) */ - MPP49_GPIO, /* CPLD extension (addr 2) */ + MPP44_GPIO, /* GPIO extension (data 0) */ + MPP45_GPIO, /* GPIO extension (data 1) */ + MPP46_GPIO, /* GPIO extension (data 2) */ + MPP47_GPIO, /* GPIO extension (addr 0) */ + MPP48_GPIO, /* GPIO extension (addr 1) */ + MPP49_GPIO, /* GPIO extension (addr 2) */ 0 }; @@ -324,7 +329,7 @@ static unsigned int net5big_v2_mpp_config[] __initdata = { MPP26_GE1_RXD2, MPP27_GE1_RXD3, MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* CPLD extension ALE */ + MPP29_GPIO, /* GPIO extension ALE */ MPP30_GE1_RXCTL, MPP31_GE1_RXCLK, MPP32_GE1_TCLKOUT, @@ -339,12 +344,12 @@ static unsigned int net5big_v2_mpp_config[] __initdata = { MPP41_GPIO, /* SATA HDD3 power */ MPP42_GPIO, /* SATA HDD4 power */ MPP43_GPIO, /* SATA HDD5 power */ - MPP44_GPIO, /* CPLD extension (data 0) */ - MPP45_GPIO, /* CPLD extension (data 1) */ - MPP46_GPIO, /* CPLD extension (data 2) */ - MPP47_GPIO, /* CPLD extension (addr 0) */ - MPP48_GPIO, /* CPLD extension (addr 1) */ - MPP49_GPIO, /* CPLD extension (addr 2) */ + MPP44_GPIO, /* GPIO extension (data 0) */ + MPP45_GPIO, /* GPIO extension (data 1) */ + MPP46_GPIO, /* GPIO extension (data 2) */ + MPP47_GPIO, /* GPIO extension (addr 0) */ + MPP48_GPIO, /* GPIO extension (addr 1) */ + MPP49_GPIO, /* GPIO extension (addr 2) */ 0 }; @@ -366,7 +371,10 @@ static void __init netxbig_v2_init(void) else kirkwood_mpp_conf(net5big_v2_mpp_config); - netxbig_v2_sata_power_init(); + if (machine_is_net2big_v2()) + lacie_v2_hdd_power_init(2); + else + lacie_v2_hdd_power_init(5); kirkwood_ehci_init(); kirkwood_ge00_init(&netxbig_v2_ge00_data); @@ -374,13 +382,12 @@ static void __init netxbig_v2_init(void) kirkwood_ge01_init(&netxbig_v2_ge01_data); kirkwood_sata_init(&netxbig_v2_sata_data); kirkwood_uart0_init(); - spi_register_board_info(netxbig_v2_spi_slave_info, - ARRAY_SIZE(netxbig_v2_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_i2c_init(); - i2c_register_board_info(0, netxbig_v2_i2c_info, - ARRAY_SIZE(netxbig_v2_i2c_info)); + lacie_v2_register_flash(); + lacie_v2_register_i2c_devices(); + if (machine_is_net5big_v2()) + netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data; + platform_device_register(&netxbig_v2_leds); platform_device_register(&netxbig_v2_gpio_buttons); if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 && @@ -392,24 +399,20 @@ static void __init netxbig_v2_init(void) #ifdef CONFIG_MACH_NET2BIG_V2 MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &netxbig_v2_timer, + .timer = &lacie_v2_timer, MACHINE_END #endif #ifdef CONFIG_MACH_NET5BIG_V2 MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &netxbig_v2_timer, + .timer = &lacie_v2_timer, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index fd06be618815..c9d77fad10ab 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -16,6 +16,7 @@ #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/i2c.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> @@ -57,7 +58,22 @@ static struct mvsdio_platform_data openrd_mvsdio_data = { }; static unsigned int openrd_mpp_config[] __initdata = { + MPP12_SD_CLK, + MPP13_SD_CMD, + MPP14_SD_D0, + MPP15_SD_D1, + MPP16_SD_D2, + MPP17_SD_D3, + MPP28_GPIO, MPP29_GPIO, + MPP34_GPIO, + 0 +}; + +/* Configure MPP for UART1 */ +static unsigned int openrd_uart1_mpp_config[] __initdata = { + MPP13_UART1_TXD, + MPP14_UART1_RXD, 0 }; @@ -67,6 +83,68 @@ static struct i2c_board_info i2c_board_info[] __initdata = { }, }; +static int __initdata uart1; + +static int __init sd_uart_selection(char *str) +{ + uart1 = -EINVAL; + + /* Default is SD. Change if required, for UART */ + if (!str) + return 0; + + if (!strncmp(str, "232", 3)) { + uart1 = 232; + } else if (!strncmp(str, "485", 3)) { + /* OpenRD-Base doesn't have RS485. Treat is as an + * unknown argument & just have default setting - + * which is SD */ + if (machine_is_openrd_base()) { + uart1 = -ENODEV; + return 1; + } + + uart1 = 485; + } + return 1; +} +/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */ +__setup("kw_openrd_init_uart1=", sd_uart_selection); + +static int __init uart1_mpp_config(void) +{ + kirkwood_mpp_conf(openrd_uart1_mpp_config); + + if (gpio_request(34, "SD_UART1_SEL")) { + printk(KERN_ERR "GPIO request failed for SD/UART1 selection" + ", gpio: 34\n"); + return -EIO; + } + + if (gpio_request(28, "RS232_RS485_SEL")) { + printk(KERN_ERR "GPIO request failed for RS232/RS485 selection" + ", gpio# 28\n"); + gpio_free(34); + return -EIO; + } + + /* Select UART1 + * Pin # 34: 0 => UART1, 1 => SD */ + gpio_direction_output(34, 0); + + /* Select RS232 OR RS485 + * Pin # 28: 0 => RS232, 1 => RS485 */ + if (uart1 == 232) + gpio_direction_output(28, 0); + else + gpio_direction_output(28, 1); + + gpio_free(34); + gpio_free(28); + + return 0; +} + static void __init openrd_init(void) { /* @@ -90,7 +168,6 @@ static void __init openrd_init(void) kirkwood_ge01_init(&openrd_ge01_data); kirkwood_sata_init(&openrd_sata_data); - kirkwood_sdio_init(&openrd_mvsdio_data); kirkwood_i2c_init(); @@ -99,6 +176,28 @@ static void __init openrd_init(void) ARRAY_SIZE(i2c_board_info)); kirkwood_audio_init(); } + + if (uart1 <= 0) { + if (uart1 < 0) + printk(KERN_ERR "Invalid kernel parameter to select " + "UART1. Defaulting to SD. ERROR CODE: %d\n", + uart1); + + /* Select SD + * Pin # 34: 0 => UART1, 1 => SD */ + if (gpio_request(34, "SD_UART1_SEL")) { + printk(KERN_ERR "GPIO request failed for SD/UART1 " + "selection, gpio: 34\n"); + } else { + + gpio_direction_output(34, 1); + gpio_free(34); + kirkwood_sdio_init(&openrd_mvsdio_data); + } + } else { + if (!uart1_mpp_config()) + kirkwood_uart1_init(); + } } static int __init openrd_pci_init(void) @@ -115,8 +214,6 @@ subsys_initcall(openrd_pci_init); #ifdef CONFIG_MACH_OPENRD_BASE MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = openrd_init, .map_io = kirkwood_map_io, @@ -128,8 +225,6 @@ MACHINE_END #ifdef CONFIG_MACH_OPENRD_CLIENT MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = openrd_init, .map_io = kirkwood_map_io, @@ -141,8 +236,6 @@ MACHINE_END #ifdef CONFIG_MACH_OPENRD_ULTIMATE MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = openrd_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index c34718c2cfe5..0049614cd324 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -79,8 +79,6 @@ subsys_initcall(rd88f6192_pci_init); MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = rd88f6192_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 3d1477135e12..0998a08cf42d 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -115,8 +115,6 @@ subsys_initcall(rd88f6281_pci_init); MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = rd88f6281_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index a00879d34d54..d2eec35dfe0f 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -131,8 +131,6 @@ static void __init sheevaplug_init(void) #ifdef CONFIG_MACH_SHEEVAPLUG MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") /* Maintainer: shadi Ammouri <shadi@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, @@ -143,8 +141,6 @@ MACHINE_END #ifdef CONFIG_MACH_ESATA_SHEEVAPLUG MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index d01bf89cedbe..ce50e61aac9f 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -184,8 +184,6 @@ subsys_initcall(hp_t5325_pci_init); MACHINE_START(T5325, "HP t5325 Thin Client") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = hp_t5325_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index a5bd7fde04a9..6710bd7773b8 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -120,8 +120,6 @@ subsys_initcall(ts219_pci_init); MACHINE_START(TS219, "QNAP TS-119/TS-219") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = qnap_ts219_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 2e14afef07a2..8be09a0ce4ac 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -149,8 +149,6 @@ subsys_initcall(ts41x_pci_init); MACHINE_START(TS41X, "QNAP TS-41x") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = qnap_ts41x_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index 9e3e5a640ad2..3ca4f8e6f54f 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -223,8 +223,6 @@ static void __init acs5k_init(void) MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board") /* Maintainer: Simtec Electronics. */ - .phys_io = KS8695_IO_PA, - .io_pg_offst = (KS8695_IO_VA >> 18) & 0xfffc, .boot_params = KS8695_SDRAM_PA + 0x100, .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index 521ff0789f39..ada92b6bed24 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -121,8 +121,6 @@ static void __init dsm320_init(void) MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player") /* Maintainer: Simtec Electronics. */ - .phys_io = KS8695_IO_PA, - .io_pg_offst = (KS8695_IO_VA >> 18) & 0xfffc, .boot_params = KS8695_SDRAM_PA + 0x100, .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index 8ceaf5ac6e2c..c7ad09bd6ea2 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -53,8 +53,6 @@ static void __init micrel_init(void) MACHINE_START(KS8695, "KS8695 Centaur Development Board") /* Maintainer: Micrel Semiconductor Inc. */ - .phys_io = KS8695_IO_PA, - .io_pg_offst = (KS8695_IO_VA >> 18) & 0xfffc, .boot_params = KS8695_SDRAM_PA + 0x100, .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S index cf2095da2372..bf516adf1925 100644 --- a/arch/arm/mach-ks8695/include/mach/debug-macro.S +++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S @@ -14,11 +14,9 @@ #include <mach/hardware.h> #include <mach/regs-uart.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =KS8695_UART_PA @ physical base address - ldrne \rx, =KS8695_UART_VA @ virtual base address + .macro addruart, rp, rv + ldr \rp, =KS8695_UART_PA @ physical base address + ldr \rv, =KS8695_UART_VA @ virtual base address .endm .macro senduart, rd, rx diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S new file mode 100644 index 000000000000..b0a2db77d392 --- /dev/null +++ b/arch/arm/mach-l7200/include/mach/debug-macro.S @@ -0,0 +1,38 @@ +/* arch/arm/mach-l7200/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .equ io_virt, IO_BASE + .equ io_phys, IO_START + + .macro addruart, rp, rv + mov \rp, #0x00044000 @ UART1 +@ mov \rp, #0x00045000 @ UART2 + add \rv, \rp, #io_virt @ virtual address + add \rp, \rp, #io_phys @ physical base address + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x0] @ UARTDR + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full + bne 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy + bne 1001b + .endm diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c index 3d7bd50b9095..9088c16662e8 100644 --- a/arch/arm/mach-lh7a40x/arch-kev7a400.c +++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c @@ -111,8 +111,6 @@ void __init lh7a40x_init_board_irq (void) MACHINE_START (KEV7A400, "Sharp KEV7a400") /* Maintainer: Marc Singer */ - .phys_io = 0x80000000, - .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, .boot_params = 0xc0000100, .map_io = kev7a400_map_io, .init_irq = lh7a400_init_irq, diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c index cb15e5d32120..7315a569aea1 100644 --- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c @@ -398,8 +398,6 @@ lpd7a40x_map_io(void) MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10") /* Maintainer: Marc Singer */ - .phys_io = 0x80000000, - .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, .boot_params = 0xc0000100, .map_io = lpd7a40x_map_io, .init_irq = lh7a400_init_irq, @@ -413,8 +411,6 @@ MACHINE_END MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10") /* Maintainer: Marc Singer */ - .phys_io = 0x80000000, - .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, .boot_params = 0xc0000100, .map_io = lpd7a40x_map_io, .init_irq = lh7a404_init_irq, diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S index c0dcbbba22ba..cff33625276f 100644 --- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S +++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S @@ -14,12 +14,10 @@ @ It is not known if this will be appropriate for every 40x @ board. - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - mov \rx, #0x00000700 @ offset from base - orreq \rx, \rx, #0x80000000 @ physical base - orrne \rx, \rx, #0xf8000000 @ virtual base + .macro addruart, rp, rv + mov \rp, #0x00000700 @ offset from base + orr \rv, \rp, #0xf8000000 @ virtual base + orr \rp, \rp, #0x80000000 @ physical base .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S index 3136c913a92c..cc90d99ac76c 100644 --- a/arch/arm/mach-loki/include/mach/debug-macro.S +++ b/arch/arm/mach-loki/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include <mach/loki.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =LOKI_REGS_PHYS_BASE - ldrne \rx, =LOKI_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =LOKI_REGS_PHYS_BASE + ldr \rv, =LOKI_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c index 85f9c1296aa0..a1e75e7fc500 100644 --- a/arch/arm/mach-loki/lb88rc8480-setup.c +++ b/arch/arm/mach-loki/lb88rc8480-setup.c @@ -90,8 +90,6 @@ static void __init lb88rc8480_init(void) MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board") /* Maintainer: Ke Wei <kewei@marvell.com> */ - .phys_io = LOKI_REGS_PHYS_BASE, - .io_pg_offst = ((LOKI_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = lb88rc8480_init, .map_io = loki_map_io, diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S index 621744d6b152..629e744aeb9e 100644 --- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S +++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S @@ -20,11 +20,9 @@ * Debug output is hardcoded to standard UART 5 */ - .macro addruart,rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =0x40090000 - ldrne \rx, =0xF4090000 + .macro addruart, rp, rv + ldreq \rp, =0x40090000 + ldrne \rv, =0xF4090000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index bc9a42da2145..7993b096778e 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -172,18 +172,12 @@ static void phy3250_spi_cs_set(u32 control) } static struct pl022_config_chip spi0_chip_info = { - .lbm = LOOPBACK_DISABLED, .com_mode = INTERRUPT_TRANSFER, .iface = SSP_INTERFACE_MOTOROLA_SPI, .hierarchy = SSP_MASTER, .slave_tx_disable = 0, - .endian_tx = SSP_TX_LSB, - .endian_rx = SSP_RX_LSB, - .data_size = SSP_DATA_BITS_8, .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_FIRST_EDGE, - .clk_pol = SSP_CLK_POL_IDLE_LOW, .ctrl_len = SSP_BITS_8, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, @@ -239,6 +233,7 @@ static int __init phy3250_spi_board_register(void) .max_speed_hz = 5000000, .bus_num = 0, .chip_select = 0, + .mode = SPI_MODE_0, .platform_data = &eeprom, .controller_data = &spi0_chip_info, }, @@ -387,8 +382,6 @@ arch_initcall(lpc32xx_display_uid); MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller") /* Maintainer: Kevin Wells, NXP Semiconductors */ - .phys_io = LPC32XX_UART5_BASE, - .io_pg_offst = ((IO_ADDRESS(LPC32XX_UART5_BASE))>>18) & 0xfffc, .boot_params = 0x80000100, .map_io = lpc32xx_map_io, .init_irq = lpc32xx_init_irq, diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 6ab843eaa35b..0711d3b620ad 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -57,6 +57,13 @@ config MACH_MARVELL_JASPER PXA910-based development board. Since MMP2 is compatible to ARMv6 architecture. +config MACH_TETON_BGA + bool "Marvell's PXA168 Teton BGA Development Board" + select CPU_PXA168 + help + Say 'Y' here if you want to support the Marvell PXA168-based + Teton BGA Development Board. + endmenu config CPU_PXA168 diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 8b66d06739c4..751cdbf733c8 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o +obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 0629394a5fb9..06b5fa853c93 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -16,6 +16,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/interrupt.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -23,6 +24,9 @@ #include <mach/mfp-pxa168.h> #include <mach/pxa168.h> #include <mach/gpio.h> +#include <video/pxa168fb.h> +#include <linux/input.h> +#include <plat/pxa27x_keypad.h> #include "common.h" @@ -66,6 +70,43 @@ static unsigned long common_pin_config[] __initdata = { GPIO115_I2S_BCLK, GPIO116_I2S_RXD, GPIO117_I2S_TXD, + + /* LCD */ + GPIO56_LCD_FCLK_RD, + GPIO57_LCD_LCLK_A0, + GPIO58_LCD_PCLK_WR, + GPIO59_LCD_DENA_BIAS, + GPIO60_LCD_DD0, + GPIO61_LCD_DD1, + GPIO62_LCD_DD2, + GPIO63_LCD_DD3, + GPIO64_LCD_DD4, + GPIO65_LCD_DD5, + GPIO66_LCD_DD6, + GPIO67_LCD_DD7, + GPIO68_LCD_DD8, + GPIO69_LCD_DD9, + GPIO70_LCD_DD10, + GPIO71_LCD_DD11, + GPIO72_LCD_DD12, + GPIO73_LCD_DD13, + GPIO74_LCD_DD14, + GPIO75_LCD_DD15, + GPIO76_LCD_DD16, + GPIO77_LCD_DD17, + GPIO78_LCD_DD18, + GPIO79_LCD_DD19, + GPIO80_LCD_DD20, + GPIO81_LCD_DD21, + GPIO82_LCD_DD22, + GPIO83_LCD_DD23, + + /* Keypad */ + GPIO109_KP_MKIN1, + GPIO110_KP_MKIN0, + GPIO111_KP_MKOUT7, + GPIO112_KP_MKOUT6, + GPIO121_KP_MKIN4, }; static struct smc91x_platdata smc91x_info = { @@ -134,6 +175,51 @@ static struct i2c_board_info aspenite_i2c_info[] __initdata = { { I2C_BOARD_INFO("wm8753", 0x1b), }, }; +static struct fb_videomode video_modes[] = { + [0] = { + .pixclock = 30120, + .refresh = 60, + .xres = 800, + .yres = 480, + .hsync_len = 1, + .left_margin = 215, + .right_margin = 40, + .vsync_len = 1, + .upper_margin = 34, + .lower_margin = 10, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + }, +}; + +struct pxa168fb_mach_info aspenite_lcd_info = { + .id = "Graphic Frame", + .modes = video_modes, + .num_modes = ARRAY_SIZE(video_modes), + .pix_fmt = PIX_FMT_RGB565, + .io_pin_allocation_mode = PIN_MODE_DUMB_24, + .dumb_mode = DUMB_MODE_RGB888, + .active = 1, + .panel_rbswap = 0, + .invert_pixclock = 0, +}; + +static unsigned int aspenite_matrix_key_map[] = { + KEY(0, 6, KEY_UP), /* SW 4 */ + KEY(0, 7, KEY_DOWN), /* SW 5 */ + KEY(1, 6, KEY_LEFT), /* SW 6 */ + KEY(1, 7, KEY_RIGHT), /* SW 7 */ + KEY(4, 6, KEY_ENTER), /* SW 8 */ + KEY(4, 7, KEY_ESC), /* SW 9 */ +}; + +static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = { + .matrix_key_rows = 5, + .matrix_key_cols = 8, + .matrix_key_map = aspenite_matrix_key_map, + .matrix_key_map_size = ARRAY_SIZE(aspenite_matrix_key_map), + .debounce_interval = 30, +}; + static void __init common_init(void) { mfp_config(ARRAY_AND_SIZE(common_pin_config)); @@ -143,24 +229,24 @@ static void __init common_init(void) pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info)); pxa168_add_ssp(1); pxa168_add_nand(&aspenite_nand_info); + pxa168_add_fb(&aspenite_lcd_info); + pxa168_add_keypad(&aspenite_keypad_info); /* off-chip devices */ platform_device_register(&smc91x_device); } MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") - .phys_io = APB_PHYS_BASE, - .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, .map_io = mmp_map_io, + .nr_irqs = IRQ_BOARD_START, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, MACHINE_END MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") - .phys_io = APB_PHYS_BASE, - .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, .map_io = mmp_map_io, + .nr_irqs = IRQ_BOARD_START, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, .init_machine = common_init, diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 69bcba11f53f..39f0878d64a0 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -41,8 +41,6 @@ static void __init avengers_lite_init(void) } MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform") - .phys_io = APB_PHYS_BASE, - .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, .map_io = mmp_map_io, .init_irq = pxa168_init_irq, .timer = &pxa168_timer, diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 3b29fa7e9b08..0ec0ca80bb3e 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -10,13 +10,20 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/module.h> #include <asm/page.h> #include <asm/mach/map.h> #include <mach/addr-map.h> +#include <mach/cputype.h> #include "common.h" +#define MMP_CHIPID (AXI_VIRT_BASE + 0x82c00) + +unsigned int mmp_chip_id; +EXPORT_SYMBOL(mmp_chip_id); + static struct map_desc standard_io_desc[] __initdata = { { .pfn = __phys_to_pfn(APB_PHYS_BASE), @@ -34,4 +41,7 @@ static struct map_desc standard_io_desc[] __initdata = { void __init mmp_map_io(void) { iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); + + /* this is early, initialize mmp_chip_id here */ + mmp_chip_id = __raw_readl(MMP_CHIPID); } diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index e4312d238eae..bdeb6db4d49a 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -16,6 +16,7 @@ #include <linux/smc91x.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/interrupt.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -25,6 +26,8 @@ #include "common.h" +#define FLINT_NR_IRQS (IRQ_BOARD_START + 48) + static unsigned long flint_pin_config[] __initdata = { /* UART1 */ GPIO45_UART1_RXD, @@ -113,9 +116,8 @@ static void __init flint_init(void) } MACHINE_START(FLINT, "Flint Development Platform") - .phys_io = APB_PHYS_BASE, - .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, .map_io = mmp_map_io, + .nr_irqs = FLINT_NR_IRQS, .init_irq = mmp2_init_irq, .timer = &mmp2_timer, .init_machine = flint_init, diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h index 83b18721d933..f43a68b213f1 100644 --- a/arch/arm/mach-mmp/include/mach/cputype.h +++ b/arch/arm/mach-mmp/include/mach/cputype.h @@ -4,36 +4,51 @@ #include <asm/cputype.h> /* - * CPU Stepping OLD_ID CPU_ID CHIP_ID + * CPU Stepping CPU_ID CHIP_ID * - * PXA168 A0 0x41159263 0x56158400 0x00A0A333 - * PXA910 Y0 0x41159262 0x56158000 0x00F0C910 - * MMP2 Z0 0x560f5811 + * PXA168 S0 0x56158400 0x0000C910 + * PXA168 A0 0x56158400 0x00A0A168 + * PXA910 Y1 0x56158400 0x00F2C920 + * PXA910 A0 0x56158400 0x00F2C910 + * PXA910 A1 0x56158400 0x00A0C910 + * PXA920 Y0 0x56158400 0x00F2C920 + * PXA920 A0 0x56158400 0x00A0C920 + * PXA920 A1 0x56158400 0x00A1C920 + * MMP2 Z0 0x560f5811 0x00F00410 + * MMP2 Z1 0x560f5811 0x00E00410 + * MMP2 A0 0x560f5811 0x00A0A610 */ +extern unsigned int mmp_chip_id; + #ifdef CONFIG_CPU_PXA168 -# define __cpu_is_pxa168(id) \ - ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; }) +static inline int cpu_is_pxa168(void) +{ + return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && + ((mmp_chip_id & 0xfff) == 0x168); +} #else -# define __cpu_is_pxa168(id) (0) +#define cpu_is_pxa168() (0) #endif +/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */ #ifdef CONFIG_CPU_PXA910 -# define __cpu_is_pxa910(id) \ - ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; }) +static inline int cpu_is_pxa910(void) +{ + return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && + (((mmp_chip_id & 0xfff) == 0x910) || + ((mmp_chip_id & 0xfff) == 0x920)); +} #else -# define __cpu_is_pxa910(id) (0) +#define cpu_is_pxa910() (0) #endif #ifdef CONFIG_CPU_MMP2 -# define __cpu_is_mmp2(id) \ - ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x58; }) +static inline int cpu_is_mmp2(void) +{ + return (((cpu_readid_id() >> 8) & 0xff) == 0x58); #else -# define __cpu_is_mmp2(id) (0) +#define cpu_is_mmp2() (0) #endif -#define cpu_is_pxa168() ({ __cpu_is_pxa168(read_cpuid_id()); }) -#define cpu_is_pxa910() ({ __cpu_is_pxa910(read_cpuid_id()); }) -#define cpu_is_mmp2() ({ __cpu_is_mmp2(read_cpuid_id()); }) - #endif /* __ASM_MACH_CPUTYPE_H */ diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S index 76deff238e1c..7e2ebd3efc7c 100644 --- a/arch/arm/mach-mmp/include/mach/debug-macro.S +++ b/arch/arm/mach-mmp/include/mach/debug-macro.S @@ -11,12 +11,11 @@ #include <mach/addr-map.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =APB_PHYS_BASE @ physical - ldrne \rx, =APB_VIRT_BASE @ virtual - orr \rx, \rx, #0x00017000 + .macro addruart, rp, rv + ldr \rp, =APB_PHYS_BASE @ physical + ldr \rv, =APB_VIRT_BASE @ virtual + orr \rp, \rp, #0x00017000 + orr \rv, \rv, #0x00017000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index b379cdec4d38..a09d328e2ddd 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -222,10 +222,8 @@ #define IRQ_GPIO_NUM 192 #define IRQ_GPIO(x) (IRQ_GPIO_START + (x)) -/* Board IRQ - 64 by default, increase if not enough */ #define IRQ_BOARD_START (IRQ_GPIO_START + IRQ_GPIO_NUM) -#define IRQ_BOARD_END (IRQ_BOARD_START + 64) -#define NR_IRQS (IRQ_BOARD_END) +#define NR_IRQS (IRQ_BOARD_START) #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index ded43c455ec3..4621067c7720 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -289,4 +289,11 @@ #define GPIO86_PWM1_OUT MFP_CFG(GPIO86, AF2) #define GPIO86_PWM2_OUT MFP_CFG(GPIO86, AF3) +/* Keypad */ +#define GPIO109_KP_MKIN1 MFP_CFG(GPIO109, AF7) +#define GPIO110_KP_MKIN0 MFP_CFG(GPIO110, AF7) +#define GPIO111_KP_MKOUT7 MFP_CFG(GPIO111, AF7) +#define GPIO112_KP_MKOUT6 MFP_CFG(GPIO112, AF7) +#define GPIO121_KP_MKIN4 MFP_CFG(GPIO121, AF7) + #endif /* __ASM_MACH_MFP_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 27e1bc758623..1801e4206232 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -5,11 +5,15 @@ struct sys_timer; extern struct sys_timer pxa168_timer; extern void __init pxa168_init_irq(void); +extern void pxa168_clear_keypad_wakeup(void); #include <linux/i2c.h> #include <mach/devices.h> #include <plat/i2c.h> #include <plat/pxa3xx_nand.h> +#include <video/pxa168fb.h> +#include <plat/pxa27x_keypad.h> +#include <mach/cputype.h> extern struct pxa_device_desc pxa168_device_uart1; extern struct pxa_device_desc pxa168_device_uart2; @@ -25,6 +29,8 @@ extern struct pxa_device_desc pxa168_device_ssp3; extern struct pxa_device_desc pxa168_device_ssp4; extern struct pxa_device_desc pxa168_device_ssp5; extern struct pxa_device_desc pxa168_device_nand; +extern struct pxa_device_desc pxa168_device_fb; +extern struct pxa_device_desc pxa168_device_keypad; static inline int pxa168_add_uart(int id) { @@ -97,4 +103,18 @@ static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info) { return pxa_register_device(&pxa168_device_nand, info, sizeof(*info)); } + +static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi) +{ + return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi)); +} + +static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data) +{ + if (cpu_is_pxa168()) + data->clear_wakeup_event = pxa168_clear_keypad_wakeup; + + return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data)); +} + #endif /* __ASM_MACH_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h index 919030514120..ac4702357a6e 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apmu.h +++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h @@ -33,4 +33,16 @@ #define APMU_FNRST_DIS (1 << 1) #define APMU_AXIRST_DIS (1 << 0) +/* Wake Clear Register */ +#define APMU_WAKE_CLR APMU_REG(0x07c) + +#define APMU_PXA168_KP_WAKE_CLR (1 << 7) +#define APMU_PXA168_CFI_WAKE_CLR (1 << 6) +#define APMU_PXA168_XD_WAKE_CLR (1 << 5) +#define APMU_PXA168_MSP_WAKE_CLR (1 << 4) +#define APMU_PXA168_SD4_WAKE_CLR (1 << 3) +#define APMU_PXA168_SD3_WAKE_CLR (1 << 2) +#define APMU_PXA168_SD2_WAKE_CLR (1 << 1) +#define APMU_PXA168_SD1_WAKE_CLR (1 << 0) + #endif /* __ASM_MACH_REGS_APMU_H */ diff --git a/arch/arm/mach-mmp/include/mach/teton_bga.h b/arch/arm/mach-mmp/include/mach/teton_bga.h new file mode 100644 index 000000000000..61a539b2cc98 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/teton_bga.h @@ -0,0 +1,27 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/teton_bga.h + * + * Support for the Marvell PXA168 Teton BGA Development Platform. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#ifndef __ASM_MACH_TETON_BGA_H +#define __ASM_MACH_TETON_BGA_H + +/* GPIOs */ +#define MMC_PWENA_GPIO 27 +#define USBHPENB_GPIO 55 +#define RTC_INT_GPIO 78 +#define LCD_VBLK_EN_GPIO 79 +#define LCD_DVDD_EN_GPIO 80 +#define RST_WIFI_GPIO 81 +#define CF_PWEN_GPIO 82 +#define USB_OC_GPIO 83 +#define PWM_GPIO 84 +#define USBHPENA_GPIO 85 +#define TS_INT_GPIO 86 +#define CIR_GPIO 108 + +#endif /* __ASM_MACH_TETON_BGA_H */ diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 80c3e7ab1e17..2a684fa50773 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -18,16 +18,18 @@ #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/mfd/max8925.h> +#include <linux/interrupt.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> #include <mach/mfp-mmp2.h> #include <mach/mmp2.h> -#include <mach/irqs.h> #include "common.h" +#define JASPER_NR_IRQS (IRQ_BOARD_START + 48) + static unsigned long jasper_pin_config[] __initdata = { /* UART1 */ GPIO29_UART1_RXD, @@ -134,9 +136,8 @@ static void __init jasper_init(void) } MACHINE_START(MARVELL_JASPER, "Jasper Development Platform") - .phys_io = APB_PHYS_BASE, - .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, .map_io = mmp_map_io, + .nr_irqs = JASPER_NR_IRQS, .init_irq = mmp2_init_irq, .timer = &mmp2_timer, .init_machine = jasper_init, diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 652ae660634c..72b4e7631583 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -77,8 +77,10 @@ static APBC_CLK(ssp2, PXA168_SSP2, 4, 0); static APBC_CLK(ssp3, PXA168_SSP3, 4, 0); static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); +static APBC_CLK(keypad, PXA168_KPC, 0, 32000); static APMU_CLK(nand, NAND, 0x01db, 208000000); +static APMU_CLK(lcd, LCD, 0x7f, 312000000); /* device and clock bindings */ static struct clk_lookup pxa168_clkregs[] = { @@ -96,6 +98,8 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL), INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), + INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), }; static int __init pxa168_init(void) @@ -132,6 +136,16 @@ struct sys_timer pxa168_timer = { .init = pxa168_timer_init, }; +void pxa168_clear_keypad_wakeup(void) +{ + uint32_t val; + uint32_t mask = APMU_PXA168_KP_WAKE_CLR; + + /* wake event clear is needed in order to clear keypad interrupt */ + val = __raw_readl(APMU_WAKE_CLR); + __raw_writel(val | mask, APMU_WAKE_CLR); +} + /* on-chip devices */ PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22); PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24); @@ -147,3 +161,5 @@ PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55); PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57); PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59); PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); +PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8); +PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c); diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index e81db7428215..c296b75c4453 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -99,8 +99,6 @@ static void __init tavorevb_init(void) } MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)") - .phys_io = APB_PHYS_BASE, - .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, .map_io = mmp_map_io, .init_irq = pxa910_init_irq, .timer = &pxa910_timer, diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c new file mode 100644 index 000000000000..bbe4727b96cc --- /dev/null +++ b/arch/arm/mach-mmp/teton_bga.c @@ -0,0 +1,89 @@ +/* + * linux/arch/arm/mach-mmp/teton_bga.c + * + * Support for the Marvell PXA168 Teton BGA Development Platform. + * + * Author: Mark F. Brown <mark.brown314@gmail.com> + * + * This code is based on aspenite.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <plat/pxa27x_keypad.h> +#include <linux/i2c.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/addr-map.h> +#include <mach/mfp-pxa168.h> +#include <mach/pxa168.h> +#include <mach/teton_bga.h> + +#include "common.h" + +static unsigned long teton_bga_pin_config[] __initdata = { + /* UART1 */ + GPIO107_UART1_TXD, + GPIO108_UART1_RXD, + + /* Keypad */ + GPIO109_KP_MKIN1, + GPIO110_KP_MKIN0, + GPIO111_KP_MKOUT7, + GPIO112_KP_MKOUT6, + + /* I2C Bus */ + GPIO105_CI2C_SDA, + GPIO106_CI2C_SCL, + + /* RTC */ + GPIO78_GPIO, +}; + +static unsigned int teton_bga_matrix_key_map[] = { + KEY(0, 6, KEY_ESC), + KEY(0, 7, KEY_ENTER), + KEY(1, 6, KEY_LEFT), + KEY(1, 7, KEY_RIGHT), +}; + +static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = { + .matrix_key_rows = 2, + .matrix_key_cols = 8, + .matrix_key_map = teton_bga_matrix_key_map, + .matrix_key_map_size = ARRAY_SIZE(teton_bga_matrix_key_map), + .debounce_interval = 30, +}; + +static struct i2c_board_info teton_bga_i2c_info[] __initdata = { + { + I2C_BOARD_INFO("ds1337", 0x68), + .irq = gpio_to_irq(RTC_INT_GPIO) + }, +}; + +static void __init teton_bga_init(void) +{ + mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config)); + + /* on-chip devices */ + pxa168_add_uart(1); + pxa168_add_keypad(&teton_bga_keypad_info); + pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info)); +} + +MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform") + .map_io = mmp_map_io, + .nr_irqs = IRQ_BOARD_START, + .init_irq = pxa168_init_irq, + .timer = &pxa168_timer, + .init_machine = teton_bga_init, +MACHINE_END diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index ee65e05f0cf1..e411039ea59e 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -14,6 +14,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/onenand.h> +#include <linux/interrupt.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -24,6 +25,8 @@ #include "common.h" +#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 24) + static unsigned long ttc_dkb_pin_config[] __initdata = { /* UART2 */ GPIO47_UART2_RXD, @@ -122,9 +125,8 @@ static void __init ttc_dkb_init(void) } MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform") - .phys_io = APB_PHYS_BASE, - .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, .map_io = mmp_map_io, + .nr_irqs = TTCDKB_NR_IRQS, .init_irq = pxa910_init_irq, .timer = &pxa910_timer, .init_machine = ttc_dkb_init, diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 47264a76eeb3..3115a29dec4e 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -10,6 +10,8 @@ config ARCH_MSM7X00A select MSM_SMD select MSM_SMD_PKG3 select CPU_V6 + select MSM_PROC_COMM + select HAS_MSM_DEBUG_UART_PHYS config ARCH_MSM7X30 bool "MSM7x30" @@ -18,6 +20,9 @@ config ARCH_MSM7X30 select MSM_VIC select CPU_V7 select MSM_REMOTE_SPINLOCK_DEKKERS + select MSM_GPIOMUX + select MSM_PROC_COMM + select HAS_MSM_DEBUG_UART_PHYS config ARCH_QSD8X50 bool "QSD8X50" @@ -26,6 +31,19 @@ config ARCH_QSD8X50 select MSM_VIC select CPU_V7 select MSM_REMOTE_SPINLOCK_LDREX + select MSM_GPIOMUX + select MSM_PROC_COMM + select HAS_MSM_DEBUG_UART_PHYS + +config ARCH_MSM8X60 + bool "MSM8X60" + select ARM_GIC + select CPU_V7 + select MSM_V2_TLMM + select MSM_GPIOMUX + select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \ + && !MACH_MSM8X60_FFA) + endchoice config MSM_SOC_REV_A @@ -36,6 +54,9 @@ config ARCH_MSM_ARM11 config ARCH_MSM_SCORPION bool +config HAS_MSM_DEBUG_UART_PHYS + bool + config MSM_VIC bool @@ -74,6 +95,30 @@ config MACH_QSD8X50A_ST1_5 help Support for the Qualcomm ST1.5. +config MACH_MSM8X60_RUMI3 + depends on ARCH_MSM8X60 + bool "MSM8x60 RUMI3" + help + Support for the Qualcomm MSM8x60 RUMI3 emulator. + +config MACH_MSM8X60_SURF + depends on ARCH_MSM8X60 + bool "MSM8x60 SURF" + help + Support for the Qualcomm MSM8x60 SURF eval board. + +config MACH_MSM8X60_SIM + depends on ARCH_MSM8X60 + bool "MSM8x60 Simulator" + help + Support for the Qualcomm MSM8x60 simulator. + +config MACH_MSM8X60_FFA + depends on ARCH_MSM8X60 + bool "MSM8x60 FFA" + help + Support for the Qualcomm MSM8x60 FFA eval board. + endmenu config MSM_DEBUG_UART @@ -82,6 +127,7 @@ config MSM_DEBUG_UART default 2 if MSM_DEBUG_UART2 default 3 if MSM_DEBUG_UART3 +if HAS_MSM_DEBUG_UART_PHYS choice prompt "Debug UART" @@ -99,11 +145,20 @@ choice config MSM_DEBUG_UART3 bool "UART3" endchoice +endif config MSM_SMD_PKG3 bool +config MSM_PROC_COMM + bool + config MSM_SMD bool +config MSM_GPIOMUX + bool + +config MSM_V2_TLMM + bool endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 704610648a25..b5a7b07a44f5 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,16 +1,20 @@ -obj-y += proc_comm.o -obj-y += io.o idle.o timer.o dma.o -obj-y += vreg.o +obj-y += io.o idle.o timer.o +ifndef CONFIG_ARCH_MSM8X60 obj-y += acpuclock-arm11.o -obj-y += clock.o clock-pcom.o -obj-y += gpio.o +obj-y += dma.o +endif ifdef CONFIG_MSM_VIC obj-y += irq-vic.o else +ifndef CONFIG_ARCH_MSM8X60 obj-y += irq.o endif +endif +obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o devices-msm8x60-iommu.o +obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o +obj-$(CONFIG_MSM_PROC_COMM) += clock.o obj-$(CONFIG_ARCH_QSD8X50) += sirc.o obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o @@ -19,4 +23,11 @@ obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o d obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o +obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o +obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o +obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o +obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o +ifndef CONFIG_MSM_V2_TLMM +obj-y += gpio.o +endif diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 7bd72e8f127e..59edecbe126c 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -95,8 +95,6 @@ static void __init halibut_map_io(void) MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = 0x10000100, .fixup = halibut_fixup, diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index bcbefdfe7b5e..ef3ebf2f763b 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -75,8 +75,6 @@ extern struct sys_timer msm_timer; MACHINE_START(MAHIMAHI, "mahimahi") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = 0x20000100, .fixup = mahimahi_fixup, diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c index db9381b85bf0..e7a76eff57d9 100644 --- a/arch/arm/mach-msm/board-msm7x27.c +++ b/arch/arm/mach-msm/board-msm7x27.c @@ -131,8 +131,6 @@ static void __init msm7x2x_map_io(void) MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, @@ -143,8 +141,6 @@ MACHINE_END MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, @@ -155,8 +151,6 @@ MACHINE_END MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, @@ -167,8 +161,6 @@ MACHINE_END MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index e32981928c77..05241df3f9b6 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -39,27 +39,11 @@ extern struct sys_timer msm_timer; -#ifdef CONFIG_SERIAL_MSM_CONSOLE -static struct msm_gpio uart2_config_data[] = { - { GPIO_CFG(49, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_RFR"}, - { GPIO_CFG(50, 2, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_CTS"}, - { GPIO_CFG(51, 2, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"}, - { GPIO_CFG(52, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"}, -}; - -static void msm7x30_init_uart2(void) -{ - msm_gpios_request_enable(uart2_config_data, - ARRAY_SIZE(uart2_config_data)); - -} -#endif - static struct platform_device *devices[] __initdata = { #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) &msm_device_uart2, #endif - + &msm_device_smd, }; static void __init msm7x30_init_irq(void) @@ -70,10 +54,6 @@ static void __init msm7x30_init_irq(void) static void __init msm7x30_init(void) { platform_add_devices(devices, ARRAY_SIZE(devices)); -#ifdef CONFIG_SERIAL_MSM_CONSOLE - msm7x30_init_uart2(); -#endif - } static void __init msm7x30_map_io(void) @@ -84,8 +64,6 @@ static void __init msm7x30_map_io(void) MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, @@ -96,8 +74,6 @@ MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, @@ -108,8 +84,6 @@ MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c new file mode 100644 index 000000000000..7486a681cc71 --- /dev/null +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -0,0 +1,100 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/irq.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/hardware/gic.h> + +#include <mach/board.h> +#include <mach/msm_iomap.h> + +void __iomem *gic_cpu_base_addr; + +unsigned long clk_get_max_axi_khz(void) +{ + return 0; +} + +static void __init msm8x60_map_io(void) +{ + msm_map_msm8x60_io(); +} + +static void __init msm8x60_init_irq(void) +{ + unsigned int i; + + gic_dist_init(0, MSM_QGIC_DIST_BASE, GIC_PPI_START); + gic_cpu_base_addr = (void *)MSM_QGIC_CPU_BASE; + gic_cpu_init(0, MSM_QGIC_CPU_BASE); + + /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ + writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); + + /* RUMI does not adhere to GIC spec by enabling STIs by default. + * Enable/clear is supposed to be RO for STIs, but is RW on RUMI. + */ + if (!machine_is_msm8x60_sim()) + writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET); + + /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet + * as they are configured as level, which does not play nice with + * handle_percpu_irq. + */ + for (i = GIC_PPI_START; i < GIC_SPI_START; i++) { + if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE) + set_irq_handler(i, handle_percpu_irq); + } +} + +static void __init msm8x60_init(void) +{ +} + +MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") + .map_io = msm8x60_map_io, + .init_irq = msm8x60_init_irq, + .init_machine = msm8x60_init, + .timer = &msm_timer, +MACHINE_END + +MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") + .map_io = msm8x60_map_io, + .init_irq = msm8x60_init_irq, + .init_machine = msm8x60_init, + .timer = &msm_timer, +MACHINE_END + +MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") + .map_io = msm8x60_map_io, + .init_irq = msm8x60_init_irq, + .init_machine = msm8x60_init, + .timer = &msm_timer, +MACHINE_END + +MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") + .map_io = msm8x60_map_io, + .init_irq = msm8x60_init_irq, + .init_machine = msm8x60_init, + .timer = &msm_timer, +MACHINE_END diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index e3cc80792d6c..ed2af4ad97ed 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -35,20 +35,49 @@ extern struct sys_timer msm_timer; -static struct msm_gpio uart3_config_data[] = { - { GPIO_CFG(86, 1, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"}, - { GPIO_CFG(87, 1, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"}, +static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300; +static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156; + +/* Leave smc91x resources empty here, as we'll fill them in + * at run-time: they vary from board to board, and the true + * configuration won't be known until boot. + */ +static struct resource smc91x_resources[] __initdata = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + }, }; -static struct platform_device *devices[] __initdata = { - &msm_device_uart3, +static struct platform_device smc91x_device __initdata = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, }; -static void msm8x50_init_uart3(void) +static int __init msm_init_smc91x(void) { - msm_gpios_request_enable(uart3_config_data, - ARRAY_SIZE(uart3_config_data)); + if (machine_is_qsd8x50_surf()) { + smc91x_resources[0].start = qsd8x50_surf_smc91x_base; + smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff; + smc91x_resources[1].start = + gpio_to_irq(qsd8x50_surf_smc91x_gpio); + smc91x_resources[1].end = + gpio_to_irq(qsd8x50_surf_smc91x_gpio); + platform_device_register(&smc91x_device); + } + + return 0; } +module_init(msm_init_smc91x); + +static struct platform_device *devices[] __initdata = { + &msm_device_uart3, + &msm_device_smd, +}; static void __init qsd8x50_map_io(void) { @@ -64,14 +93,11 @@ static void __init qsd8x50_init_irq(void) static void __init qsd8x50_init(void) { - msm8x50_init_uart3(); platform_add_devices(devices, ARRAY_SIZE(devices)); } MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, @@ -82,8 +108,6 @@ MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 2bc1b9d5623e..8919ffb17196 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -106,8 +106,6 @@ static void __init sapphire_map_io(void) MACHINE_START(SAPPHIRE, "sapphire") /* Maintainer: Brian Swetland <swetland@google.com> */ #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .fixup = sapphire_fixup, diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 469e0be3499d..73f146066542 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -93,8 +93,6 @@ static void __init trout_map_io(void) MACHINE_START(TROUT, "HTC Dream") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = 0x10000100, .fixup = trout_fixup, diff --git a/arch/arm/mach-msm/clock-dummy.c b/arch/arm/mach-msm/clock-dummy.c new file mode 100644 index 000000000000..1250d22082ee --- /dev/null +++ b/arch/arm/mach-msm/clock-dummy.c @@ -0,0 +1,54 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + */ +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/module.h> + +struct clk *clk_get(struct device *dev, const char *id) +{ + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return -ENOENT; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_get_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + return -ENOENT; +} +EXPORT_SYMBOL(clk_set_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index b449e8ad2904..7fcf2e3b7698 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -51,6 +51,11 @@ struct platform_device msm_device_uart2 = { .resource = resources_uart2, }; +struct platform_device msm_device_smd = { + .name = "msm_smd", + .id = -1, +}; + struct clk msm_clocks_7x30[] = { CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0), diff --git a/arch/arm/mach-msm/devices-msm8x60-iommu.c b/arch/arm/mach-msm/devices-msm8x60-iommu.c new file mode 100644 index 000000000000..89b9d4437e92 --- /dev/null +++ b/arch/arm/mach-msm/devices-msm8x60-iommu.c @@ -0,0 +1,883 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/bootmem.h> + +#include <mach/msm_iomap-8x60.h> +#include <mach/irqs-8x60.h> +#include <mach/iommu.h> + +static struct resource msm_iommu_jpegd_resources[] = { + { + .start = MSM_IOMMU_JPEGD_PHYS, + .end = MSM_IOMMU_JPEGD_PHYS + MSM_IOMMU_JPEGD_SIZE - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ, + .end = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_JPEGD_CB_SC_SECURE_IRQ, + .end = SMMU_JPEGD_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_vpe_resources[] = { + { + .start = MSM_IOMMU_VPE_PHYS, + .end = MSM_IOMMU_VPE_PHYS + MSM_IOMMU_VPE_SIZE - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_VPE_CB_SC_NON_SECURE_IRQ, + .end = SMMU_VPE_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_VPE_CB_SC_SECURE_IRQ, + .end = SMMU_VPE_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_mdp0_resources[] = { + { + .start = MSM_IOMMU_MDP0_PHYS, + .end = MSM_IOMMU_MDP0_PHYS + MSM_IOMMU_MDP0_SIZE - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_MDP0_CB_SC_NON_SECURE_IRQ, + .end = SMMU_MDP0_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_MDP0_CB_SC_SECURE_IRQ, + .end = SMMU_MDP0_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_mdp1_resources[] = { + { + .start = MSM_IOMMU_MDP1_PHYS, + .end = MSM_IOMMU_MDP1_PHYS + MSM_IOMMU_MDP1_SIZE - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_MDP1_CB_SC_NON_SECURE_IRQ, + .end = SMMU_MDP1_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_MDP1_CB_SC_SECURE_IRQ, + .end = SMMU_MDP1_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_rot_resources[] = { + { + .start = MSM_IOMMU_ROT_PHYS, + .end = MSM_IOMMU_ROT_PHYS + MSM_IOMMU_ROT_SIZE - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_ROT_CB_SC_NON_SECURE_IRQ, + .end = SMMU_ROT_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_ROT_CB_SC_SECURE_IRQ, + .end = SMMU_ROT_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_ijpeg_resources[] = { + { + .start = MSM_IOMMU_IJPEG_PHYS, + .end = MSM_IOMMU_IJPEG_PHYS + MSM_IOMMU_IJPEG_SIZE - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ, + .end = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_IJPEG_CB_SC_SECURE_IRQ, + .end = SMMU_IJPEG_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_vfe_resources[] = { + { + .start = MSM_IOMMU_VFE_PHYS, + .end = MSM_IOMMU_VFE_PHYS + MSM_IOMMU_VFE_SIZE - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_VFE_CB_SC_NON_SECURE_IRQ, + .end = SMMU_VFE_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_VFE_CB_SC_SECURE_IRQ, + .end = SMMU_VFE_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_vcodec_a_resources[] = { + { + .start = MSM_IOMMU_VCODEC_A_PHYS, + .end = MSM_IOMMU_VCODEC_A_PHYS + MSM_IOMMU_VCODEC_A_SIZE - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ, + .end = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_VCODEC_A_CB_SC_SECURE_IRQ, + .end = SMMU_VCODEC_A_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_vcodec_b_resources[] = { + { + .start = MSM_IOMMU_VCODEC_B_PHYS, + .end = MSM_IOMMU_VCODEC_B_PHYS + MSM_IOMMU_VCODEC_B_SIZE - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ, + .end = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_VCODEC_B_CB_SC_SECURE_IRQ, + .end = SMMU_VCODEC_B_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_gfx3d_resources[] = { + { + .start = MSM_IOMMU_GFX3D_PHYS, + .end = MSM_IOMMU_GFX3D_PHYS + MSM_IOMMU_GFX3D_SIZE - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ, + .end = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_GFX3D_CB_SC_SECURE_IRQ, + .end = SMMU_GFX3D_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_gfx2d0_resources[] = { + { + .start = MSM_IOMMU_GFX2D0_PHYS, + .end = MSM_IOMMU_GFX2D0_PHYS + MSM_IOMMU_GFX2D0_SIZE - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ, + .end = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_GFX2D0_CB_SC_SECURE_IRQ, + .end = SMMU_GFX2D0_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device msm_root_iommu_dev = { + .name = "msm_iommu", + .id = -1, +}; + +static struct msm_iommu_dev jpegd_smmu = { + .name = "jpegd", + .clk_rate = -1 +}; + +static struct msm_iommu_dev vpe_smmu = { + .name = "vpe" +}; + +static struct msm_iommu_dev mdp0_smmu = { + .name = "mdp0" +}; + +static struct msm_iommu_dev mdp1_smmu = { + .name = "mdp1" +}; + +static struct msm_iommu_dev rot_smmu = { + .name = "rot" +}; + +static struct msm_iommu_dev ijpeg_smmu = { + .name = "ijpeg" +}; + +static struct msm_iommu_dev vfe_smmu = { + .name = "vfe", + .clk_rate = -1 +}; + +static struct msm_iommu_dev vcodec_a_smmu = { + .name = "vcodec_a" +}; + +static struct msm_iommu_dev vcodec_b_smmu = { + .name = "vcodec_b" +}; + +static struct msm_iommu_dev gfx3d_smmu = { + .name = "gfx3d", + .clk_rate = 27000000 +}; + +static struct msm_iommu_dev gfx2d0_smmu = { + .name = "gfx2d0", + .clk_rate = 27000000 +}; + +static struct platform_device msm_device_smmu_jpegd = { + .name = "msm_iommu", + .id = 0, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_jpegd_resources), + .resource = msm_iommu_jpegd_resources, +}; + +static struct platform_device msm_device_smmu_vpe = { + .name = "msm_iommu", + .id = 1, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_vpe_resources), + .resource = msm_iommu_vpe_resources, +}; + +static struct platform_device msm_device_smmu_mdp0 = { + .name = "msm_iommu", + .id = 2, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_mdp0_resources), + .resource = msm_iommu_mdp0_resources, +}; + +static struct platform_device msm_device_smmu_mdp1 = { + .name = "msm_iommu", + .id = 3, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_mdp1_resources), + .resource = msm_iommu_mdp1_resources, +}; + +static struct platform_device msm_device_smmu_rot = { + .name = "msm_iommu", + .id = 4, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_rot_resources), + .resource = msm_iommu_rot_resources, +}; + +static struct platform_device msm_device_smmu_ijpeg = { + .name = "msm_iommu", + .id = 5, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_ijpeg_resources), + .resource = msm_iommu_ijpeg_resources, +}; + +static struct platform_device msm_device_smmu_vfe = { + .name = "msm_iommu", + .id = 6, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_vfe_resources), + .resource = msm_iommu_vfe_resources, +}; + +static struct platform_device msm_device_smmu_vcodec_a = { + .name = "msm_iommu", + .id = 7, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_vcodec_a_resources), + .resource = msm_iommu_vcodec_a_resources, +}; + +static struct platform_device msm_device_smmu_vcodec_b = { + .name = "msm_iommu", + .id = 8, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_vcodec_b_resources), + .resource = msm_iommu_vcodec_b_resources, +}; + +static struct platform_device msm_device_smmu_gfx3d = { + .name = "msm_iommu", + .id = 9, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_gfx3d_resources), + .resource = msm_iommu_gfx3d_resources, +}; + +static struct platform_device msm_device_smmu_gfx2d0 = { + .name = "msm_iommu", + .id = 10, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_gfx2d0_resources), + .resource = msm_iommu_gfx2d0_resources, +}; + +static struct msm_iommu_ctx_dev jpegd_src_ctx = { + .name = "jpegd_src", + .num = 0, + .mids = {0, -1} +}; + +static struct msm_iommu_ctx_dev jpegd_dst_ctx = { + .name = "jpegd_dst", + .num = 1, + .mids = {1, -1} +}; + +static struct msm_iommu_ctx_dev vpe_src_ctx = { + .name = "vpe_src", + .num = 0, + .mids = {0, -1} +}; + +static struct msm_iommu_ctx_dev vpe_dst_ctx = { + .name = "vpe_dst", + .num = 1, + .mids = {1, -1} +}; + +static struct msm_iommu_ctx_dev mdp_vg1_ctx = { + .name = "mdp_vg1", + .num = 0, + .mids = {0, 2, -1} +}; + +static struct msm_iommu_ctx_dev mdp_rgb1_ctx = { + .name = "mdp_rgb1", + .num = 1, + .mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1} +}; + +static struct msm_iommu_ctx_dev mdp_vg2_ctx = { + .name = "mdp_vg2", + .num = 0, + .mids = {0, 2, -1} +}; + +static struct msm_iommu_ctx_dev mdp_rgb2_ctx = { + .name = "mdp_rgb2", + .num = 1, + .mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1} +}; + +static struct msm_iommu_ctx_dev rot_src_ctx = { + .name = "rot_src", + .num = 0, + .mids = {0, -1} +}; + +static struct msm_iommu_ctx_dev rot_dst_ctx = { + .name = "rot_dst", + .num = 1, + .mids = {1, -1} +}; + +static struct msm_iommu_ctx_dev ijpeg_src_ctx = { + .name = "ijpeg_src", + .num = 0, + .mids = {0, -1} +}; + +static struct msm_iommu_ctx_dev ijpeg_dst_ctx = { + .name = "ijpeg_dst", + .num = 1, + .mids = {1, -1} +}; + +static struct msm_iommu_ctx_dev vfe_imgwr_ctx = { + .name = "vfe_imgwr", + .num = 0, + .mids = {2, 3, 4, 5, 6, 7, 8, -1} +}; + +static struct msm_iommu_ctx_dev vfe_misc_ctx = { + .name = "vfe_misc", + .num = 1, + .mids = {0, 1, 9, -1} +}; + +static struct msm_iommu_ctx_dev vcodec_a_stream_ctx = { + .name = "vcodec_a_stream", + .num = 0, + .mids = {2, 5, -1} +}; + +static struct msm_iommu_ctx_dev vcodec_a_mm1_ctx = { + .name = "vcodec_a_mm1", + .num = 1, + .mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1} +}; + +static struct msm_iommu_ctx_dev vcodec_b_mm2_ctx = { + .name = "vcodec_b_mm2", + .num = 0, + .mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1} +}; + +static struct msm_iommu_ctx_dev gfx3d_rbpa_ctx = { + .name = "gfx3d_rbpa", + .num = 0, + .mids = {-1} +}; + +static struct msm_iommu_ctx_dev gfx3d_cpvgttc_ctx = { + .name = "gfx3d_cpvgttc", + .num = 1, + .mids = {0, 1, 2, 3, 4, 5, 6, 7, -1} +}; + +static struct msm_iommu_ctx_dev gfx3d_smmu_ctx = { + .name = "gfx3d_smmu", + .num = 2, + .mids = {8, 9, 10, 11, 12, -1} +}; + +static struct msm_iommu_ctx_dev gfx2d0_pixv1_ctx = { + .name = "gfx2d0_pixv1_smmu", + .num = 0, + .mids = {0, 3, 4, -1} +}; + +static struct msm_iommu_ctx_dev gfx2d0_texv3_ctx = { + .name = "gfx2d0_texv3_smmu", + .num = 1, + .mids = {1, 6, 7, -1} +}; + +static struct platform_device msm_device_jpegd_src_ctx = { + .name = "msm_iommu_ctx", + .id = 0, + .dev = { + .parent = &msm_device_smmu_jpegd.dev, + }, +}; + +static struct platform_device msm_device_jpegd_dst_ctx = { + .name = "msm_iommu_ctx", + .id = 1, + .dev = { + .parent = &msm_device_smmu_jpegd.dev, + }, +}; + +static struct platform_device msm_device_vpe_src_ctx = { + .name = "msm_iommu_ctx", + .id = 2, + .dev = { + .parent = &msm_device_smmu_vpe.dev, + }, +}; + +static struct platform_device msm_device_vpe_dst_ctx = { + .name = "msm_iommu_ctx", + .id = 3, + .dev = { + .parent = &msm_device_smmu_vpe.dev, + }, +}; + +static struct platform_device msm_device_mdp_vg1_ctx = { + .name = "msm_iommu_ctx", + .id = 4, + .dev = { + .parent = &msm_device_smmu_mdp0.dev, + }, +}; + +static struct platform_device msm_device_mdp_rgb1_ctx = { + .name = "msm_iommu_ctx", + .id = 5, + .dev = { + .parent = &msm_device_smmu_mdp0.dev, + }, +}; + +static struct platform_device msm_device_mdp_vg2_ctx = { + .name = "msm_iommu_ctx", + .id = 6, + .dev = { + .parent = &msm_device_smmu_mdp1.dev, + }, +}; + +static struct platform_device msm_device_mdp_rgb2_ctx = { + .name = "msm_iommu_ctx", + .id = 7, + .dev = { + .parent = &msm_device_smmu_mdp1.dev, + }, +}; + +static struct platform_device msm_device_rot_src_ctx = { + .name = "msm_iommu_ctx", + .id = 8, + .dev = { + .parent = &msm_device_smmu_rot.dev, + }, +}; + +static struct platform_device msm_device_rot_dst_ctx = { + .name = "msm_iommu_ctx", + .id = 9, + .dev = { + .parent = &msm_device_smmu_rot.dev, + }, +}; + +static struct platform_device msm_device_ijpeg_src_ctx = { + .name = "msm_iommu_ctx", + .id = 10, + .dev = { + .parent = &msm_device_smmu_ijpeg.dev, + }, +}; + +static struct platform_device msm_device_ijpeg_dst_ctx = { + .name = "msm_iommu_ctx", + .id = 11, + .dev = { + .parent = &msm_device_smmu_ijpeg.dev, + }, +}; + +static struct platform_device msm_device_vfe_imgwr_ctx = { + .name = "msm_iommu_ctx", + .id = 12, + .dev = { + .parent = &msm_device_smmu_vfe.dev, + }, +}; + +static struct platform_device msm_device_vfe_misc_ctx = { + .name = "msm_iommu_ctx", + .id = 13, + .dev = { + .parent = &msm_device_smmu_vfe.dev, + }, +}; + +static struct platform_device msm_device_vcodec_a_stream_ctx = { + .name = "msm_iommu_ctx", + .id = 14, + .dev = { + .parent = &msm_device_smmu_vcodec_a.dev, + }, +}; + +static struct platform_device msm_device_vcodec_a_mm1_ctx = { + .name = "msm_iommu_ctx", + .id = 15, + .dev = { + .parent = &msm_device_smmu_vcodec_a.dev, + }, +}; + +static struct platform_device msm_device_vcodec_b_mm2_ctx = { + .name = "msm_iommu_ctx", + .id = 16, + .dev = { + .parent = &msm_device_smmu_vcodec_b.dev, + }, +}; + +static struct platform_device msm_device_gfx3d_rbpa_ctx = { + .name = "msm_iommu_ctx", + .id = 17, + .dev = { + .parent = &msm_device_smmu_gfx3d.dev, + }, +}; + +static struct platform_device msm_device_gfx3d_cpvgttc_ctx = { + .name = "msm_iommu_ctx", + .id = 18, + .dev = { + .parent = &msm_device_smmu_gfx3d.dev, + }, +}; + +static struct platform_device msm_device_gfx3d_smmu_ctx = { + .name = "msm_iommu_ctx", + .id = 19, + .dev = { + .parent = &msm_device_smmu_gfx3d.dev, + }, +}; + +static struct platform_device msm_device_gfx2d0_pixv1_ctx = { + .name = "msm_iommu_ctx", + .id = 20, + .dev = { + .parent = &msm_device_smmu_gfx2d0.dev, + }, +}; + +static struct platform_device msm_device_gfx2d0_texv3_ctx = { + .name = "msm_iommu_ctx", + .id = 21, + .dev = { + .parent = &msm_device_smmu_gfx2d0.dev, + }, +}; + +static struct platform_device *msm_iommu_devs[] = { + &msm_device_smmu_jpegd, + &msm_device_smmu_vpe, + &msm_device_smmu_mdp0, + &msm_device_smmu_mdp1, + &msm_device_smmu_rot, + &msm_device_smmu_ijpeg, + &msm_device_smmu_vfe, + &msm_device_smmu_vcodec_a, + &msm_device_smmu_vcodec_b, + &msm_device_smmu_gfx3d, + &msm_device_smmu_gfx2d0, +}; + +static struct msm_iommu_dev *msm_iommu_data[] = { + &jpegd_smmu, + &vpe_smmu, + &mdp0_smmu, + &mdp1_smmu, + &rot_smmu, + &ijpeg_smmu, + &vfe_smmu, + &vcodec_a_smmu, + &vcodec_b_smmu, + &gfx3d_smmu, + &gfx2d0_smmu, +}; + +static struct platform_device *msm_iommu_ctx_devs[] = { + &msm_device_jpegd_src_ctx, + &msm_device_jpegd_dst_ctx, + &msm_device_vpe_src_ctx, + &msm_device_vpe_dst_ctx, + &msm_device_mdp_vg1_ctx, + &msm_device_mdp_rgb1_ctx, + &msm_device_mdp_vg2_ctx, + &msm_device_mdp_rgb2_ctx, + &msm_device_rot_src_ctx, + &msm_device_rot_dst_ctx, + &msm_device_ijpeg_src_ctx, + &msm_device_ijpeg_dst_ctx, + &msm_device_vfe_imgwr_ctx, + &msm_device_vfe_misc_ctx, + &msm_device_vcodec_a_stream_ctx, + &msm_device_vcodec_a_mm1_ctx, + &msm_device_vcodec_b_mm2_ctx, + &msm_device_gfx3d_rbpa_ctx, + &msm_device_gfx3d_cpvgttc_ctx, + &msm_device_gfx3d_smmu_ctx, + &msm_device_gfx2d0_pixv1_ctx, + &msm_device_gfx2d0_texv3_ctx, +}; + +static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = { + &jpegd_src_ctx, + &jpegd_dst_ctx, + &vpe_src_ctx, + &vpe_dst_ctx, + &mdp_vg1_ctx, + &mdp_rgb1_ctx, + &mdp_vg2_ctx, + &mdp_rgb2_ctx, + &rot_src_ctx, + &rot_dst_ctx, + &ijpeg_src_ctx, + &ijpeg_dst_ctx, + &vfe_imgwr_ctx, + &vfe_misc_ctx, + &vcodec_a_stream_ctx, + &vcodec_a_mm1_ctx, + &vcodec_b_mm2_ctx, + &gfx3d_rbpa_ctx, + &gfx3d_cpvgttc_ctx, + &gfx3d_smmu_ctx, + &gfx2d0_pixv1_ctx, + &gfx2d0_texv3_ctx, +}; + +static int msm8x60_iommu_init(void) +{ + int ret, i; + + ret = platform_device_register(&msm_root_iommu_dev); + if (ret != 0) { + pr_err("Failed to register root IOMMU device!\n"); + goto failure; + } + + for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); i++) { + ret = platform_device_add_data(msm_iommu_devs[i], + msm_iommu_data[i], + sizeof(struct msm_iommu_dev)); + if (ret != 0) { + pr_err("platform_device_add_data failed, " + "i = %d\n", i); + goto failure_unwind; + } + + ret = platform_device_register(msm_iommu_devs[i]); + + if (ret != 0) { + pr_err("platform_device_register smmu failed, " + "i = %d\n", i); + goto failure_unwind; + } + } + + for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) { + ret = platform_device_add_data(msm_iommu_ctx_devs[i], + msm_iommu_ctx_data[i], + sizeof(*msm_iommu_ctx_devs[i])); + if (ret != 0) { + pr_err("platform_device_add_data smmu failed, " + "i = %d\n", i); + goto failure_unwind2; + } + + ret = platform_device_register(msm_iommu_ctx_devs[i]); + if (ret != 0) { + pr_err("platform_device_register ctx failed, " + "i = %d\n", i); + goto failure_unwind2; + } + } + return 0; + +failure_unwind2: + while (--i >= 0) + platform_device_unregister(msm_iommu_ctx_devs[i]); +failure_unwind: + while (--i >= 0) + platform_device_unregister(msm_iommu_devs[i]); + + platform_device_unregister(&msm_root_iommu_dev); +failure: + return ret; +} + +static void msm8x60_iommu_exit(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) + platform_device_unregister(msm_iommu_ctx_devs[i]); + + for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); ++i) + platform_device_unregister(msm_iommu_devs[i]); + + platform_device_unregister(&msm_root_iommu_dev); +} + +subsys_initcall(msm8x60_iommu_init); +module_exit(msm8x60_iommu_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>"); diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index 4d4a50785e34..6fe67c5d1ae0 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -48,6 +48,11 @@ struct platform_device msm_device_uart3 = { .resource = resources_uart3, }; +struct platform_device msm_device_smd = { + .name = "msm_smd", + .id = -1, +}; + struct clk msm_clocks_8x50[] = { CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN), diff --git a/arch/arm/mach-msm/gpio.c b/arch/arm/mach-msm/gpio.c index bc32c845c7b0..33051b509e88 100644 --- a/arch/arm/mach-msm/gpio.c +++ b/arch/arm/mach-msm/gpio.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-msm/gpio.c * * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009, Code Aurora Forum. All rights reserved. + * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -14,72 +14,363 @@ * */ +#include <linux/bitops.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> #include <linux/module.h> -#include <mach/gpio.h> -#include "proc_comm.h" - -int gpio_tlmm_config(unsigned config, unsigned disable) -{ - return msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, &disable); -} -EXPORT_SYMBOL(gpio_tlmm_config); - -int msm_gpios_enable(const struct msm_gpio *table, int size) -{ - int rc; - int i; - const struct msm_gpio *g; - for (i = 0; i < size; i++) { - g = table + i; - rc = gpio_tlmm_config(g->gpio_cfg, GPIO_ENABLE); - if (rc) { - pr_err("gpio_tlmm_config(0x%08x, GPIO_ENABLE)" - " <%s> failed: %d\n", - g->gpio_cfg, g->label ?: "?", rc); - pr_err("pin %d func %d dir %d pull %d drvstr %d\n", - GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg), - GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg), - GPIO_DRVSTR(g->gpio_cfg)); - goto err; - } +#include "gpio_hw.h" +#include "gpiomux.h" + +#define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0) + +#define MSM_GPIO_BANK(bank, first, last) \ + { \ + .regs = { \ + .out = MSM_GPIO_OUT_##bank, \ + .in = MSM_GPIO_IN_##bank, \ + .int_status = MSM_GPIO_INT_STATUS_##bank, \ + .int_clear = MSM_GPIO_INT_CLEAR_##bank, \ + .int_en = MSM_GPIO_INT_EN_##bank, \ + .int_edge = MSM_GPIO_INT_EDGE_##bank, \ + .int_pos = MSM_GPIO_INT_POS_##bank, \ + .oe = MSM_GPIO_OE_##bank, \ + }, \ + .chip = { \ + .base = (first), \ + .ngpio = (last) - (first) + 1, \ + .get = msm_gpio_get, \ + .set = msm_gpio_set, \ + .direction_input = msm_gpio_direction_input, \ + .direction_output = msm_gpio_direction_output, \ + .to_irq = msm_gpio_to_irq, \ + .request = msm_gpio_request, \ + .free = msm_gpio_free, \ + } \ } + +#define MSM_GPIO_BROKEN_INT_CLEAR 1 + +struct msm_gpio_regs { + void __iomem *out; + void __iomem *in; + void __iomem *int_status; + void __iomem *int_clear; + void __iomem *int_en; + void __iomem *int_edge; + void __iomem *int_pos; + void __iomem *oe; +}; + +struct msm_gpio_chip { + spinlock_t lock; + struct gpio_chip chip; + struct msm_gpio_regs regs; +#if MSM_GPIO_BROKEN_INT_CLEAR + unsigned int_status_copy; +#endif + unsigned int both_edge_detect; + unsigned int int_enable[2]; /* 0: awake, 1: sleep */ +}; + +static int msm_gpio_write(struct msm_gpio_chip *msm_chip, + unsigned offset, unsigned on) +{ + unsigned mask = BIT(offset); + unsigned val; + + val = readl(msm_chip->regs.out); + if (on) + writel(val | mask, msm_chip->regs.out); + else + writel(val & ~mask, msm_chip->regs.out); return 0; -err: - msm_gpios_disable(table, i); - return rc; -} -EXPORT_SYMBOL(msm_gpios_enable); - -void msm_gpios_disable(const struct msm_gpio *table, int size) -{ - int rc; - int i; - const struct msm_gpio *g; - for (i = size-1; i >= 0; i--) { - g = table + i; - rc = gpio_tlmm_config(g->gpio_cfg, GPIO_DISABLE); - if (rc) { - pr_err("gpio_tlmm_config(0x%08x, GPIO_DISABLE)" - " <%s> failed: %d\n", - g->gpio_cfg, g->label ?: "?", rc); - pr_err("pin %d func %d dir %d pull %d drvstr %d\n", - GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg), - GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg), - GPIO_DRVSTR(g->gpio_cfg)); - } +} + +static void msm_gpio_update_both_edge_detect(struct msm_gpio_chip *msm_chip) +{ + int loop_limit = 100; + unsigned pol, val, val2, intstat; + do { + val = readl(msm_chip->regs.in); + pol = readl(msm_chip->regs.int_pos); + pol = (pol & ~msm_chip->both_edge_detect) | + (~val & msm_chip->both_edge_detect); + writel(pol, msm_chip->regs.int_pos); + intstat = readl(msm_chip->regs.int_status); + val2 = readl(msm_chip->regs.in); + if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0) + return; + } while (loop_limit-- > 0); + printk(KERN_ERR "msm_gpio_update_both_edge_detect, " + "failed to reach stable state %x != %x\n", val, val2); +} + +static int msm_gpio_clear_detect_status(struct msm_gpio_chip *msm_chip, + unsigned offset) +{ + unsigned bit = BIT(offset); + +#if MSM_GPIO_BROKEN_INT_CLEAR + /* Save interrupts that already triggered before we loose them. */ + /* Any interrupt that triggers between the read of int_status */ + /* and the write to int_clear will still be lost though. */ + msm_chip->int_status_copy |= readl(msm_chip->regs.int_status); + msm_chip->int_status_copy &= ~bit; +#endif + writel(bit, msm_chip->regs.int_clear); + msm_gpio_update_both_edge_detect(msm_chip); + return 0; +} + +static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct msm_gpio_chip *msm_chip; + unsigned long irq_flags; + + msm_chip = container_of(chip, struct msm_gpio_chip, chip); + spin_lock_irqsave(&msm_chip->lock, irq_flags); + writel(readl(msm_chip->regs.oe) & ~BIT(offset), msm_chip->regs.oe); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); + return 0; +} + +static int +msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) +{ + struct msm_gpio_chip *msm_chip; + unsigned long irq_flags; + + msm_chip = container_of(chip, struct msm_gpio_chip, chip); + spin_lock_irqsave(&msm_chip->lock, irq_flags); + msm_gpio_write(msm_chip, offset, value); + writel(readl(msm_chip->regs.oe) | BIT(offset), msm_chip->regs.oe); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); + return 0; +} + +static int msm_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct msm_gpio_chip *msm_chip; + + msm_chip = container_of(chip, struct msm_gpio_chip, chip); + return (readl(msm_chip->regs.in) & (1U << offset)) ? 1 : 0; +} + +static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct msm_gpio_chip *msm_chip; + unsigned long irq_flags; + + msm_chip = container_of(chip, struct msm_gpio_chip, chip); + spin_lock_irqsave(&msm_chip->lock, irq_flags); + msm_gpio_write(msm_chip, offset, value); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); +} + +static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return MSM_GPIO_TO_INT(chip->base + offset); +} + +#ifdef CONFIG_MSM_GPIOMUX +static int msm_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return msm_gpiomux_get(chip->base + offset); +} + +static void msm_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + msm_gpiomux_put(chip->base + offset); +} +#else +#define msm_gpio_request NULL +#define msm_gpio_free NULL +#endif + +struct msm_gpio_chip msm_gpio_chips[] = { +#if defined(CONFIG_ARCH_MSM7X00A) + MSM_GPIO_BANK(0, 0, 15), + MSM_GPIO_BANK(1, 16, 42), + MSM_GPIO_BANK(2, 43, 67), + MSM_GPIO_BANK(3, 68, 94), + MSM_GPIO_BANK(4, 95, 106), + MSM_GPIO_BANK(5, 107, 121), +#elif defined(CONFIG_ARCH_MSM7X25) || defined(CONFIG_ARCH_MSM7X27) + MSM_GPIO_BANK(0, 0, 15), + MSM_GPIO_BANK(1, 16, 42), + MSM_GPIO_BANK(2, 43, 67), + MSM_GPIO_BANK(3, 68, 94), + MSM_GPIO_BANK(4, 95, 106), + MSM_GPIO_BANK(5, 107, 132), +#elif defined(CONFIG_ARCH_MSM7X30) + MSM_GPIO_BANK(0, 0, 15), + MSM_GPIO_BANK(1, 16, 43), + MSM_GPIO_BANK(2, 44, 67), + MSM_GPIO_BANK(3, 68, 94), + MSM_GPIO_BANK(4, 95, 106), + MSM_GPIO_BANK(5, 107, 133), + MSM_GPIO_BANK(6, 134, 150), + MSM_GPIO_BANK(7, 151, 181), +#elif defined(CONFIG_ARCH_QSD8X50) + MSM_GPIO_BANK(0, 0, 15), + MSM_GPIO_BANK(1, 16, 42), + MSM_GPIO_BANK(2, 43, 67), + MSM_GPIO_BANK(3, 68, 94), + MSM_GPIO_BANK(4, 95, 103), + MSM_GPIO_BANK(5, 104, 121), + MSM_GPIO_BANK(6, 122, 152), + MSM_GPIO_BANK(7, 153, 164), +#endif +}; + +static void msm_gpio_irq_ack(unsigned int irq) +{ + unsigned long irq_flags; + struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq); + spin_lock_irqsave(&msm_chip->lock, irq_flags); + msm_gpio_clear_detect_status(msm_chip, + irq - gpio_to_irq(msm_chip->chip.base)); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); +} + +static void msm_gpio_irq_mask(unsigned int irq) +{ + unsigned long irq_flags; + struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq); + unsigned offset = irq - gpio_to_irq(msm_chip->chip.base); + + spin_lock_irqsave(&msm_chip->lock, irq_flags); + /* level triggered interrupts are also latched */ + if (!(readl(msm_chip->regs.int_edge) & BIT(offset))) + msm_gpio_clear_detect_status(msm_chip, offset); + msm_chip->int_enable[0] &= ~BIT(offset); + writel(msm_chip->int_enable[0], msm_chip->regs.int_en); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); +} + +static void msm_gpio_irq_unmask(unsigned int irq) +{ + unsigned long irq_flags; + struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq); + unsigned offset = irq - gpio_to_irq(msm_chip->chip.base); + + spin_lock_irqsave(&msm_chip->lock, irq_flags); + /* level triggered interrupts are also latched */ + if (!(readl(msm_chip->regs.int_edge) & BIT(offset))) + msm_gpio_clear_detect_status(msm_chip, offset); + msm_chip->int_enable[0] |= BIT(offset); + writel(msm_chip->int_enable[0], msm_chip->regs.int_en); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); +} + +static int msm_gpio_irq_set_wake(unsigned int irq, unsigned int on) +{ + unsigned long irq_flags; + struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq); + unsigned offset = irq - gpio_to_irq(msm_chip->chip.base); + + spin_lock_irqsave(&msm_chip->lock, irq_flags); + + if (on) + msm_chip->int_enable[1] |= BIT(offset); + else + msm_chip->int_enable[1] &= ~BIT(offset); + + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); + return 0; +} + +static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type) +{ + unsigned long irq_flags; + struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq); + unsigned offset = irq - gpio_to_irq(msm_chip->chip.base); + unsigned val, mask = BIT(offset); + + spin_lock_irqsave(&msm_chip->lock, irq_flags); + val = readl(msm_chip->regs.int_edge); + if (flow_type & IRQ_TYPE_EDGE_BOTH) { + writel(val | mask, msm_chip->regs.int_edge); + irq_desc[irq].handle_irq = handle_edge_irq; + } else { + writel(val & ~mask, msm_chip->regs.int_edge); + irq_desc[irq].handle_irq = handle_level_irq; + } + if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { + msm_chip->both_edge_detect |= mask; + msm_gpio_update_both_edge_detect(msm_chip); + } else { + msm_chip->both_edge_detect &= ~mask; + val = readl(msm_chip->regs.int_pos); + if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) + writel(val | mask, msm_chip->regs.int_pos); + else + writel(val & ~mask, msm_chip->regs.int_pos); } + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); + return 0; } -EXPORT_SYMBOL(msm_gpios_disable); -int msm_gpios_request_enable(const struct msm_gpio *table, int size) +static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { - int rc = msm_gpios_enable(table, size); - return rc; + int i, j, mask; + unsigned val; + + for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) { + struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i]; + val = readl(msm_chip->regs.int_status); + val &= msm_chip->int_enable[0]; + while (val) { + mask = val & -val; + j = fls(mask) - 1; + /* printk("%s %08x %08x bit %d gpio %d irq %d\n", + __func__, v, m, j, msm_chip->chip.start + j, + FIRST_GPIO_IRQ + msm_chip->chip.start + j); */ + val &= ~mask; + generic_handle_irq(FIRST_GPIO_IRQ + + msm_chip->chip.base + j); + } + } + desc->chip->ack(irq); } -EXPORT_SYMBOL(msm_gpios_request_enable); -void msm_gpios_disable_free(const struct msm_gpio *table, int size) +static struct irq_chip msm_gpio_irq_chip = { + .name = "msmgpio", + .ack = msm_gpio_irq_ack, + .mask = msm_gpio_irq_mask, + .unmask = msm_gpio_irq_unmask, + .set_wake = msm_gpio_irq_set_wake, + .set_type = msm_gpio_irq_set_type, +}; + +static int __init msm_init_gpio(void) { - msm_gpios_disable(table, size); + int i, j = 0; + + for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) { + if (i - FIRST_GPIO_IRQ >= + msm_gpio_chips[j].chip.base + + msm_gpio_chips[j].chip.ngpio) + j++; + set_irq_chip_data(i, &msm_gpio_chips[j]); + set_irq_chip(i, &msm_gpio_irq_chip); + set_irq_handler(i, handle_edge_irq); + set_irq_flags(i, IRQF_VALID); + } + + for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) { + spin_lock_init(&msm_gpio_chips[i].lock); + writel(0, msm_gpio_chips[i].regs.int_en); + gpiochip_add(&msm_gpio_chips[i].chip); + } + + set_irq_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler); + set_irq_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler); + set_irq_wake(INT_GPIO_GROUP1, 1); + set_irq_wake(INT_GPIO_GROUP2, 2); + return 0; } -EXPORT_SYMBOL(msm_gpios_disable_free); + +postcore_initcall(msm_init_gpio); diff --git a/arch/arm/mach-msm/gpio_hw.h b/arch/arm/mach-msm/gpio_hw.h new file mode 100644 index 000000000000..6b5066038baa --- /dev/null +++ b/arch/arm/mach-msm/gpio_hw.h @@ -0,0 +1,278 @@ +/* arch/arm/mach-msm/gpio_hw.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H +#define __ARCH_ARM_MACH_MSM_GPIO_HW_H + +#include <mach/msm_iomap.h> + +/* see 80-VA736-2 Rev C pp 695-751 +** +** These are actually the *shadow* gpio registers, since the +** real ones (which allow full access) are only available to the +** ARM9 side of the world. +** +** Since the _BASE need to be page-aligned when we're mapping them +** to virtual addresses, adjust for the additional offset in these +** macros. +*/ + +#if defined(CONFIG_ARCH_MSM7X30) +#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off)) +#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off)) +#else +#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off)) +#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off)) +#endif + +#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X25) ||\ + defined(CONFIG_ARCH_MSM7X27) + +/* output value */ +#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ +#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */ +#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */ +#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ +#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */ +#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 107-121 */ + +/* same pin map as above, output enable */ +#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10) +#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) +#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14) +#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18) +#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C) +#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54) + +/* same pin map as above, input read */ +#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34) +#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) +#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38) +#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C) +#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40) +#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44) + +/* same pin map as above, 1=edge 0=level interrup */ +#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60) +#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) +#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64) +#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68) +#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C) +#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0) + +/* same pin map as above, 1=positive 0=negative */ +#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70) +#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) +#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74) +#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78) +#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C) +#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC) + +/* same pin map as above, interrupt enable */ +#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80) +#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) +#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84) +#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88) +#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C) +#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8) + +/* same pin map as above, write 1 to clear interrupt */ +#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90) +#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) +#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94) +#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98) +#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C) +#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4) + +/* same pin map as above, 1=interrupt pending */ +#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0) +#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) +#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4) +#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8) +#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC) +#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0) + +#endif + +#if defined(CONFIG_ARCH_QSD8X50) +/* output value */ +#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ +#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */ +#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */ +#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ +#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 103-95 */ +#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x10) /* gpio 121-104 */ +#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0x14) /* gpio 152-122 */ +#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x18) /* gpio 164-153 */ + +/* same pin map as above, output enable */ +#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x20) +#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) +#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x24) +#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x28) +#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x2C) +#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x30) +#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0x34) +#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x38) + +/* same pin map as above, input read */ +#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x50) +#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) +#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x54) +#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x58) +#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x5C) +#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x60) +#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0x64) +#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x68) + +/* same pin map as above, 1=edge 0=level interrup */ +#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x70) +#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) +#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x74) +#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x78) +#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x7C) +#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0x80) +#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0x84) +#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x88) + +/* same pin map as above, 1=positive 0=negative */ +#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x90) +#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) +#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x94) +#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x98) +#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x9C) +#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xA0) +#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xA4) +#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0xA8) + +/* same pin map as above, interrupt enable */ +#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0xB0) +#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) +#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0xB4) +#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0xB8) +#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0xBC) +#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xC0) +#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xC4) +#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0xC8) + +/* same pin map as above, write 1 to clear interrupt */ +#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0xD0) +#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) +#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0xD4) +#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0xD8) +#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0xDC) +#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xE0) +#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xE4) +#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0xE8) + +/* same pin map as above, 1=interrupt pending */ +#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xF0) +#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) +#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xF4) +#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xF8) +#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xFC) +#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0x100) +#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0x104) +#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x108) + +#endif + +#if defined(CONFIG_ARCH_MSM7X30) + +/* output value */ +#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ +#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 43-16 */ +#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-44 */ +#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ +#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */ +#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 133-107 */ +#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0xC4) /* gpio 150-134 */ +#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x214) /* gpio 181-151 */ + +/* same pin map as above, output enable */ +#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10) +#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) +#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14) +#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18) +#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C) +#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54) +#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0xC8) +#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x218) + +/* same pin map as above, input read */ +#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34) +#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) +#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38) +#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C) +#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40) +#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44) +#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0xCC) +#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x21C) + +/* same pin map as above, 1=edge 0=level interrup */ +#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60) +#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) +#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64) +#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68) +#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C) +#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0) +#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0xD0) +#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x240) + +/* same pin map as above, 1=positive 0=negative */ +#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70) +#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) +#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74) +#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78) +#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C) +#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC) +#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xD4) +#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0x228) + +/* same pin map as above, interrupt enable */ +#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80) +#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) +#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84) +#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88) +#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C) +#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8) +#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xD8) +#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0x22C) + +/* same pin map as above, write 1 to clear interrupt */ +#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90) +#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) +#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94) +#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98) +#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C) +#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4) +#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xDC) +#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0x230) + +/* same pin map as above, 1=interrupt pending */ +#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0) +#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) +#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4) +#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8) +#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC) +#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0) +#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0xE0) +#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x234) + +#endif + +#endif diff --git a/arch/arm/mach-msm/gpiomux-7x30.c b/arch/arm/mach-msm/gpiomux-7x30.c new file mode 100644 index 000000000000..6ce41c5241a5 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-7x30.c @@ -0,0 +1,38 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include "gpiomux.h" + +struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { +#ifdef CONFIG_SERIAL_MSM_CONSOLE + [49] = { /* UART2 RFR */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [50] = { /* UART2 CTS */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [51] = { /* UART2 RX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [52] = { /* UART2 TX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, +#endif +}; diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c new file mode 100644 index 000000000000..4406e0f4ae95 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-8x50.c @@ -0,0 +1,28 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include "gpiomux.h" + +struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { + [86] = { /* UART3 RX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_1 | GPIOMUX_VALID, + }, + [87] = { /* UART3 TX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_1 | GPIOMUX_VALID, + }, +}; diff --git a/arch/arm/mach-msm/gpiomux-8x60.c b/arch/arm/mach-msm/gpiomux-8x60.c new file mode 100644 index 000000000000..7b380b31bd0e --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-8x60.c @@ -0,0 +1,19 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include "gpiomux.h" + +struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {}; diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c new file mode 100644 index 000000000000..27de2abd7144 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-v1.c @@ -0,0 +1,33 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include <linux/kernel.h> +#include "gpiomux.h" +#include "proc_comm.h" + +void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) +{ + unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) | + ((gpio & 0x3ff) << 4); + unsigned tlmm_disable = 0; + int rc; + + rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, + &tlmm_config, &tlmm_disable); + if (rc) + pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n", + __func__, rc, tlmm_config, tlmm_disable); +} diff --git a/arch/arm/mach-msm/gpiomux-v1.h b/arch/arm/mach-msm/gpiomux-v1.h new file mode 100644 index 000000000000..71d86feba450 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-v1.h @@ -0,0 +1,67 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H +#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H + +#if defined(CONFIG_ARCH_MSM7X30) +#define GPIOMUX_NGPIOS 182 +#elif defined(CONFIG_ARCH_QSD8X50) +#define GPIOMUX_NGPIOS 165 +#else +#define GPIOMUX_NGPIOS 133 +#endif + +typedef u32 gpiomux_config_t; + +enum { + GPIOMUX_DRV_2MA = 0UL << 17, + GPIOMUX_DRV_4MA = 1UL << 17, + GPIOMUX_DRV_6MA = 2UL << 17, + GPIOMUX_DRV_8MA = 3UL << 17, + GPIOMUX_DRV_10MA = 4UL << 17, + GPIOMUX_DRV_12MA = 5UL << 17, + GPIOMUX_DRV_14MA = 6UL << 17, + GPIOMUX_DRV_16MA = 7UL << 17, +}; + +enum { + GPIOMUX_FUNC_GPIO = 0UL, + GPIOMUX_FUNC_1 = 1UL, + GPIOMUX_FUNC_2 = 2UL, + GPIOMUX_FUNC_3 = 3UL, + GPIOMUX_FUNC_4 = 4UL, + GPIOMUX_FUNC_5 = 5UL, + GPIOMUX_FUNC_6 = 6UL, + GPIOMUX_FUNC_7 = 7UL, + GPIOMUX_FUNC_8 = 8UL, + GPIOMUX_FUNC_9 = 9UL, + GPIOMUX_FUNC_A = 10UL, + GPIOMUX_FUNC_B = 11UL, + GPIOMUX_FUNC_C = 12UL, + GPIOMUX_FUNC_D = 13UL, + GPIOMUX_FUNC_E = 14UL, + GPIOMUX_FUNC_F = 15UL, +}; + +enum { + GPIOMUX_PULL_NONE = 0UL << 15, + GPIOMUX_PULL_DOWN = 1UL << 15, + GPIOMUX_PULL_KEEPER = 2UL << 15, + GPIOMUX_PULL_UP = 3UL << 15, +}; + +#endif diff --git a/arch/arm/mach-msm/gpiomux-v2.c b/arch/arm/mach-msm/gpiomux-v2.c new file mode 100644 index 000000000000..273396d2b127 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-v2.c @@ -0,0 +1,25 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include <linux/io.h> +#include <mach/msm_iomap.h> +#include "gpiomux.h" + +void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) +{ + writel(val & ~GPIOMUX_CTL_MASK, + MSM_TLMM_BASE + 0x1000 + (0x10 * gpio)); +} diff --git a/arch/arm/mach-msm/gpiomux-v2.h b/arch/arm/mach-msm/gpiomux-v2.h new file mode 100644 index 000000000000..3bf10e7f0381 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-v2.h @@ -0,0 +1,61 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H +#define __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H + +#define GPIOMUX_NGPIOS 173 + +typedef u16 gpiomux_config_t; + +enum { + GPIOMUX_DRV_2MA = 0UL << 6, + GPIOMUX_DRV_4MA = 1UL << 6, + GPIOMUX_DRV_6MA = 2UL << 6, + GPIOMUX_DRV_8MA = 3UL << 6, + GPIOMUX_DRV_10MA = 4UL << 6, + GPIOMUX_DRV_12MA = 5UL << 6, + GPIOMUX_DRV_14MA = 6UL << 6, + GPIOMUX_DRV_16MA = 7UL << 6, +}; + +enum { + GPIOMUX_FUNC_GPIO = 0UL << 2, + GPIOMUX_FUNC_1 = 1UL << 2, + GPIOMUX_FUNC_2 = 2UL << 2, + GPIOMUX_FUNC_3 = 3UL << 2, + GPIOMUX_FUNC_4 = 4UL << 2, + GPIOMUX_FUNC_5 = 5UL << 2, + GPIOMUX_FUNC_6 = 6UL << 2, + GPIOMUX_FUNC_7 = 7UL << 2, + GPIOMUX_FUNC_8 = 8UL << 2, + GPIOMUX_FUNC_9 = 9UL << 2, + GPIOMUX_FUNC_A = 10UL << 2, + GPIOMUX_FUNC_B = 11UL << 2, + GPIOMUX_FUNC_C = 12UL << 2, + GPIOMUX_FUNC_D = 13UL << 2, + GPIOMUX_FUNC_E = 14UL << 2, + GPIOMUX_FUNC_F = 15UL << 2, +}; + +enum { + GPIOMUX_PULL_NONE = 0UL, + GPIOMUX_PULL_DOWN = 1UL, + GPIOMUX_PULL_KEEPER = 2UL, + GPIOMUX_PULL_UP = 3UL, +}; + +#endif diff --git a/arch/arm/mach-msm/gpiomux.c b/arch/arm/mach-msm/gpiomux.c new file mode 100644 index 000000000000..53af21abd155 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux.c @@ -0,0 +1,96 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include <linux/module.h> +#include <linux/spinlock.h> +#include "gpiomux.h" + +static DEFINE_SPINLOCK(gpiomux_lock); + +int msm_gpiomux_write(unsigned gpio, + gpiomux_config_t active, + gpiomux_config_t suspended) +{ + struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; + unsigned long irq_flags; + gpiomux_config_t setting; + + if (gpio >= GPIOMUX_NGPIOS) + return -EINVAL; + + spin_lock_irqsave(&gpiomux_lock, irq_flags); + + if (active & GPIOMUX_VALID) + cfg->active = active; + + if (suspended & GPIOMUX_VALID) + cfg->suspended = suspended; + + setting = cfg->ref ? active : suspended; + if (setting & GPIOMUX_VALID) + __msm_gpiomux_write(gpio, setting); + + spin_unlock_irqrestore(&gpiomux_lock, irq_flags); + return 0; +} +EXPORT_SYMBOL(msm_gpiomux_write); + +int msm_gpiomux_get(unsigned gpio) +{ + struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; + unsigned long irq_flags; + + if (gpio >= GPIOMUX_NGPIOS) + return -EINVAL; + + spin_lock_irqsave(&gpiomux_lock, irq_flags); + if (cfg->ref++ == 0 && cfg->active & GPIOMUX_VALID) + __msm_gpiomux_write(gpio, cfg->active); + spin_unlock_irqrestore(&gpiomux_lock, irq_flags); + return 0; +} +EXPORT_SYMBOL(msm_gpiomux_get); + +int msm_gpiomux_put(unsigned gpio) +{ + struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; + unsigned long irq_flags; + + if (gpio >= GPIOMUX_NGPIOS) + return -EINVAL; + + spin_lock_irqsave(&gpiomux_lock, irq_flags); + BUG_ON(cfg->ref == 0); + if (--cfg->ref == 0 && cfg->suspended & GPIOMUX_VALID) + __msm_gpiomux_write(gpio, cfg->suspended); + spin_unlock_irqrestore(&gpiomux_lock, irq_flags); + return 0; +} +EXPORT_SYMBOL(msm_gpiomux_put); + +static int __init gpiomux_init(void) +{ + unsigned n; + + for (n = 0; n < GPIOMUX_NGPIOS; ++n) { + msm_gpiomux_configs[n].ref = 0; + if (!(msm_gpiomux_configs[n].suspended & GPIOMUX_VALID)) + continue; + __msm_gpiomux_write(n, msm_gpiomux_configs[n].suspended); + } + return 0; +} +postcore_initcall(gpiomux_init); diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h new file mode 100644 index 000000000000..b178d9cb742f --- /dev/null +++ b/arch/arm/mach-msm/gpiomux.h @@ -0,0 +1,114 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H +#define __ARCH_ARM_MACH_MSM_GPIOMUX_H + +#include <linux/bitops.h> +#include <linux/errno.h> + +#if defined(CONFIG_MSM_V2_TLMM) +#include "gpiomux-v2.h" +#else +#include "gpiomux-v1.h" +#endif + +/** + * struct msm_gpiomux_config: gpiomux settings for one gpio line. + * + * A complete gpiomux config is the bitwise-or of a drive-strength, + * function, and pull. For functions other than GPIO, the OE + * is hard-wired according to the function. For GPIO mode, + * OE is controlled by gpiolib. + * + * Available settings differ by target; see the gpiomux header + * specific to your target arch for available configurations. + * + * @active: The configuration to be installed when the line is + * active, or its reference count is > 0. + * @suspended: The configuration to be installed when the line + * is suspended, or its reference count is 0. + * @ref: The reference count of the line. For internal use of + * the gpiomux framework only. + */ +struct msm_gpiomux_config { + gpiomux_config_t active; + gpiomux_config_t suspended; + unsigned ref; +}; + +/** + * @GPIOMUX_VALID: If set, the config field contains 'good data'. + * The absence of this bit will prevent the gpiomux + * system from applying the configuration under all + * circumstances. + */ +enum { + GPIOMUX_VALID = BIT(sizeof(gpiomux_config_t) * BITS_PER_BYTE - 1), + GPIOMUX_CTL_MASK = GPIOMUX_VALID, +}; + +#ifdef CONFIG_MSM_GPIOMUX + +/* Each architecture must provide its own instance of this table. + * To avoid having gpiomux manage any given gpio, one or both of + * the entries can avoid setting GPIOMUX_VALID - the absence + * of that flag will prevent the configuration from being applied + * during state transitions. + */ +extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; + +/* Increment a gpio's reference count, possibly activating the line. */ +int __must_check msm_gpiomux_get(unsigned gpio); + +/* Decrement a gpio's reference count, possibly suspending the line. */ +int msm_gpiomux_put(unsigned gpio); + +/* Install a new configuration to the gpio line. To avoid overwriting + * a configuration, leave the VALID bit out. + */ +int msm_gpiomux_write(unsigned gpio, + gpiomux_config_t active, + gpiomux_config_t suspended); + +/* Architecture-internal function for use by the framework only. + * This function can assume the following: + * - the gpio value has passed a bounds-check + * - the gpiomux spinlock has been obtained + * + * This function is not for public consumption. External users + * should use msm_gpiomux_write. + */ +void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val); +#else +static inline int __must_check msm_gpiomux_get(unsigned gpio) +{ + return -ENOSYS; +} + +static inline int msm_gpiomux_put(unsigned gpio) +{ + return -ENOSYS; +} + +static inline int msm_gpiomux_write(unsigned gpio, + gpiomux_config_t active, + gpiomux_config_t suspended) +{ + return -ENOSYS; +} +#endif +#endif diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 5a79bcf50413..6abf4a6eadc1 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -33,6 +33,8 @@ struct msm_acpu_clock_platform_data struct clk; +extern struct sys_timer msm_timer; + /* common init routines for use by arch/arm/mach-msm/board-*.c */ void __init msm_add_devices(void); diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 528750f307e9..fbd5d90dcc8c 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -19,13 +19,10 @@ #include <mach/hardware.h> #include <mach/msm_iomap.h> -#ifdef CONFIG_MSM_DEBUG_UART - .macro addruart, rx, tmp - @ see if the MMU is enabled and select appropriate base address - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, =MSM_DEBUG_UART_PHYS - ldrne \rx, =MSM_DEBUG_UART_BASE +#ifdef CONFIG_HAS_MSM_DEBUG_UART_PHYS + .macro addruart, rp, rv + ldr \rp, =MSM_DEBUG_UART_PHYS + ldr \rv, =MSM_DEBUG_UART_BASE .endm .macro senduart,rd,rx @@ -39,16 +36,7 @@ tst \rd, #0x04 beq 1001b .endm -#else - .macro addruart, rx, tmp - .endm - - .macro senduart,rd,rx - .endm - - .macro waituart,rd,rx - .endm -#endif .macro busyuart,rd,rx .endm +#endif diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h index 00f9bbfadbe6..05583f569524 100644 --- a/arch/arm/mach-msm/include/mach/dma.h +++ b/arch/arm/mach-msm/include/mach/dma.h @@ -32,10 +32,18 @@ struct msm_dmov_cmd { void *data; }; +#ifndef CONFIG_ARCH_MSM8X60 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd); void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful); int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr); - +#else +static inline +void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { } +static inline +void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { } +static inline +int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; } +#endif #define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S new file mode 100644 index 000000000000..4dc99aa65d07 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S @@ -0,0 +1,88 @@ +/* + * Low-level IRQ helper macros + * + * Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/hardware.h> +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Migrated the code from ARM MP port to be more consistant + * with interrupt processing , the following still holds true + * however, all interrupts are treated the same regardless of + * if they are local IPI or PPI + * + * Interrupts 0-15 are IPI + * 16-31 are PPI + * (16-18 are the timers) + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * A simple read from the controller will tell us the number of the + * highest priority enabled interrupt. We then just need to check + * whether it is in the valid range for an IRQ (0-1020 inclusive). + * + * Base ARM code assumes that the local (private) peripheral interrupts + * are not valid, we treat them differently, in that the privates are + * handled like normal shared interrupts with the exception that only + * one processor can register the interrupt and the handler must be + * the same for all processors. + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU, + 9-0 =int # */ + + bic \irqnr, \irqstat, #0x1c00 @mask src + cmp \irqnr, #15 + ldr \tmp, =1021 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #16 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/mach-msm/include/mach/entry-macro-vic.S b/arch/arm/mach-msm/include/mach/entry-macro-vic.S new file mode 100644 index 000000000000..70563ed11b36 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/entry-macro-vic.S @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <mach/msm_iomap.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + @ enable imprecise aborts + cpsie a + mov \base, #MSM_VIC_BASE + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + @ 0xD0 has irq# or old irq# if the irq has been handled + @ 0xD4 has irq# or -1 if none pending *but* if you just + @ read 0xD4 you never get the first irq for some reason + ldr \irqnr, [\base, #0xD0] + ldr \irqnr, [\base, #0xD4] + cmp \irqnr, #0xffffffff + .endm diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S index d2259486bcb1..b16f082eeb6f 100644 --- a/arch/arm/mach-msm/include/mach/entry-macro.S +++ b/arch/arm/mach-msm/include/mach/entry-macro.S @@ -1,38 +1,23 @@ -/* arch/arm/mach-msm7200/include/mach/entry-macro.S +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * */ -#include <mach/msm_iomap.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - @ enable imprecise aborts - cpsie a - mov \base, #MSM_VIC_BASE - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ 0xD0 has irq# or old irq# if the irq has been handled - @ 0xD4 has irq# or -1 if none pending *but* if you just - @ read 0xD4 you never get the first irq for some reason - ldr \irqnr, [\base, #0xD0] - ldr \irqnr, [\base, #0xD4] - cmp \irqnr, #0xffffffff - .endm +#if defined(CONFIG_ARM_GIC) +#include <mach/entry-macro-qgic.S> +#else +#include <mach/entry-macro-vic.S> +#endif diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h index 83e47c0d5c2e..36ad50d3bfaa 100644 --- a/arch/arm/mach-msm/include/mach/gpio.h +++ b/arch/arm/mach-msm/include/mach/gpio.h @@ -23,127 +23,4 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq -/** - * struct msm_gpio - GPIO pin description - * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config() - * @label - textual label - * - * Usually, GPIO's are operated by sets. - * This struct accumulate all GPIO information in single source - * and facilitete group operations provided by msm_gpios_xxx() - */ -struct msm_gpio { - u32 gpio_cfg; - const char *label; -}; - -/** - * msm_gpios_request_enable() - request and enable set of GPIOs - * - * Request and configure set of GPIO's - * In case of error, all operations rolled back. - * Return error code. - * - * @table: GPIO table - * @size: number of entries in @table - */ -int msm_gpios_request_enable(const struct msm_gpio *table, int size); - -/** - * msm_gpios_disable_free() - disable and free set of GPIOs - * - * @table: GPIO table - * @size: number of entries in @table - */ -void msm_gpios_disable_free(const struct msm_gpio *table, int size); - -/** - * msm_gpios_request() - request set of GPIOs - * In case of error, all operations rolled back. - * Return error code. - * - * @table: GPIO table - * @size: number of entries in @table - */ -int msm_gpios_request(const struct msm_gpio *table, int size); - -/** - * msm_gpios_free() - free set of GPIOs - * - * @table: GPIO table - * @size: number of entries in @table - */ -void msm_gpios_free(const struct msm_gpio *table, int size); - -/** - * msm_gpios_enable() - enable set of GPIOs - * In case of error, all operations rolled back. - * Return error code. - * - * @table: GPIO table - * @size: number of entries in @table - */ -int msm_gpios_enable(const struct msm_gpio *table, int size); - -/** - * msm_gpios_disable() - disable set of GPIOs - * - * @table: GPIO table - * @size: number of entries in @table - */ -void msm_gpios_disable(const struct msm_gpio *table, int size); - -/* GPIO TLMM (Top Level Multiplexing) Definitions */ - -/* GPIO TLMM: Function -- GPIO specific */ - -/* GPIO TLMM: Direction */ -enum { - GPIO_INPUT, - GPIO_OUTPUT, -}; - -/* GPIO TLMM: Pullup/Pulldown */ -enum { - GPIO_NO_PULL, - GPIO_PULL_DOWN, - GPIO_KEEPER, - GPIO_PULL_UP, -}; - -/* GPIO TLMM: Drive Strength */ -enum { - GPIO_2MA, - GPIO_4MA, - GPIO_6MA, - GPIO_8MA, - GPIO_10MA, - GPIO_12MA, - GPIO_14MA, - GPIO_16MA, -}; - -enum { - GPIO_ENABLE, - GPIO_DISABLE, -}; - -#define GPIO_CFG(gpio, func, dir, pull, drvstr) \ - ((((gpio) & 0x3FF) << 4) | \ - ((func) & 0xf) | \ - (((dir) & 0x1) << 14) | \ - (((pull) & 0x3) << 15) | \ - (((drvstr) & 0xF) << 17)) - -/** - * extract GPIO pin from bit-field used for gpio_tlmm_config - */ -#define GPIO_PIN(gpio_cfg) (((gpio_cfg) >> 4) & 0x3ff) -#define GPIO_FUNC(gpio_cfg) (((gpio_cfg) >> 0) & 0xf) -#define GPIO_DIR(gpio_cfg) (((gpio_cfg) >> 14) & 0x1) -#define GPIO_PULL(gpio_cfg) (((gpio_cfg) >> 15) & 0x3) -#define GPIO_DRVSTR(gpio_cfg) (((gpio_cfg) >> 17) & 0xf) - -int gpio_tlmm_config(unsigned config, unsigned disable); - #endif /* __ASM_ARCH_MSM_GPIO_H */ diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h index c35b29f9ac0f..7386e732baad 100644 --- a/arch/arm/mach-msm/include/mach/io.h +++ b/arch/arm/mach-msm/include/mach/io.h @@ -28,6 +28,7 @@ void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int m void msm_map_qsd8x50_io(void); void msm_map_msm7x30_io(void); +void msm_map_msm8x60_io(void); extern unsigned int msm_shared_ram_phys; diff --git a/arch/arm/mach-msm/include/mach/iommu.h b/arch/arm/mach-msm/include/mach/iommu.h new file mode 100644 index 000000000000..218ef5732a24 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/iommu.h @@ -0,0 +1,103 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef MSM_IOMMU_H +#define MSM_IOMMU_H + +#include <linux/interrupt.h> + +/* Maximum number of Machine IDs that we are allowing to be mapped to the same + * context bank. The number of MIDs mapped to the same CB does not affect + * performance, but there is a practical limit on how many distinct MIDs may + * be present. These mappings are typically determined at design time and are + * not expected to change at run time. + */ +#define MAX_NUM_MIDS 16 + +/** + * struct msm_iommu_dev - a single IOMMU hardware instance + * name Human-readable name given to this IOMMU HW instance + * clk_rate Rate to set for this IOMMU's clock, if applicable to this + * particular IOMMU. 0 means don't set a rate. + * -1 means it is an AXI clock with no valid rate + * + */ +struct msm_iommu_dev { + const char *name; + int clk_rate; +}; + +/** + * struct msm_iommu_ctx_dev - an IOMMU context bank instance + * name Human-readable name given to this context bank + * num Index of this context bank within the hardware + * mids List of Machine IDs that are to be mapped into this context + * bank, terminated by -1. The MID is a set of signals on the + * AXI bus that identifies the function associated with a specific + * memory request. (See ARM spec). + */ +struct msm_iommu_ctx_dev { + const char *name; + int num; + int mids[MAX_NUM_MIDS]; +}; + + +/** + * struct msm_iommu_drvdata - A single IOMMU hardware instance + * @base: IOMMU config port base address (VA) + * @irq: Interrupt number + * + * A msm_iommu_drvdata holds the global driver data about a single piece + * of an IOMMU hardware instance. + */ +struct msm_iommu_drvdata { + void __iomem *base; + int irq; +}; + +/** + * struct msm_iommu_ctx_drvdata - an IOMMU context bank instance + * @num: Hardware context number of this context + * @pdev: Platform device associated wit this HW instance + * @attached_elm: List element for domains to track which devices are + * attached to them + * + * A msm_iommu_ctx_drvdata holds the driver data for a single context bank + * within each IOMMU hardware instance + */ +struct msm_iommu_ctx_drvdata { + int num; + struct platform_device *pdev; + struct list_head attached_elm; +}; + +/* + * Look up an IOMMU context device by its context name. NULL if none found. + * Useful for testing and drivers that do not yet fully have IOMMU stuff in + * their platform devices. + */ +struct device *msm_iommu_get_ctx(const char *ctx_name); + +/* + * Interrupt handler for the IOMMU context fault interrupt. Hooking the + * interrupt is not supported in the API yet, but this will print an error + * message and dump useful IOMMU registers. + */ +irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id); + +#endif diff --git a/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h new file mode 100644 index 000000000000..f9386d3a2f77 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h @@ -0,0 +1,1871 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H +#define __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H + +#define CTX_SHIFT 12 + +#define GET_GLOBAL_REG(reg, base) (readl((base) + (reg))) +#define GET_CTX_REG(reg, base, ctx) \ + (readl((base) + (reg) + ((ctx) << CTX_SHIFT))) + +#define SET_GLOBAL_REG(reg, base, val) writel((val), ((base) + (reg))) + +#define SET_CTX_REG(reg, base, ctx, val) \ + writel((val), ((base) + (reg) + ((ctx) << CTX_SHIFT))) + +/* Wrappers for numbered registers */ +#define SET_GLOBAL_REG_N(b, n, r, v) SET_GLOBAL_REG(b, ((r) + (n << 2)), (v)) +#define GET_GLOBAL_REG_N(b, n, r) GET_GLOBAL_REG(b, ((r) + (n << 2))) + +/* Field wrappers */ +#define GET_GLOBAL_FIELD(b, r, F) GET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT) +#define GET_CONTEXT_FIELD(b, c, r, F) \ + GET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT) + +#define SET_GLOBAL_FIELD(b, r, F, v) \ + SET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT, (v)) +#define SET_CONTEXT_FIELD(b, c, r, F, v) \ + SET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT, (v)) + +#define GET_FIELD(addr, mask, shift) ((readl(addr) >> (shift)) & (mask)) + +#define SET_FIELD(addr, mask, shift, v) \ +do { \ + int t = readl(addr); \ + writel((t & ~((mask) << (shift))) + (((v) & (mask)) << (shift)), addr);\ +} while (0) + + +#define NUM_FL_PTE 4096 +#define NUM_SL_PTE 256 + +/* First-level page table bits */ +#define FL_BASE_MASK 0xFFFFFC00 +#define FL_TYPE_TABLE (1 << 0) +#define FL_TYPE_SECT (2 << 0) +#define FL_SUPERSECTION (1 << 18) +#define FL_AP_WRITE (1 << 10) +#define FL_AP_READ (1 << 11) +#define FL_SHARED (1 << 16) +#define FL_OFFSET(va) (((va) & 0xFFF00000) >> 20) + +/* Second-level page table bits */ +#define SL_BASE_MASK_LARGE 0xFFFF0000 +#define SL_BASE_MASK_SMALL 0xFFFFF000 +#define SL_TYPE_LARGE (1 << 0) +#define SL_TYPE_SMALL (2 << 0) +#define SL_AP0 (1 << 4) +#define SL_AP1 (2 << 4) +#define SL_SHARED (1 << 10) +#define SL_OFFSET(va) (((va) & 0xFF000) >> 12) + +/* Global register setters / getters */ +#define SET_M2VCBR_N(b, N, v) SET_GLOBAL_REG_N(M2VCBR_N, N, (b), (v)) +#define SET_CBACR_N(b, N, v) SET_GLOBAL_REG_N(CBACR_N, N, (b), (v)) +#define SET_TLBRSW(b, v) SET_GLOBAL_REG(TLBRSW, (b), (v)) +#define SET_TLBTR0(b, v) SET_GLOBAL_REG(TLBTR0, (b), (v)) +#define SET_TLBTR1(b, v) SET_GLOBAL_REG(TLBTR1, (b), (v)) +#define SET_TLBTR2(b, v) SET_GLOBAL_REG(TLBTR2, (b), (v)) +#define SET_TESTBUSCR(b, v) SET_GLOBAL_REG(TESTBUSCR, (b), (v)) +#define SET_GLOBAL_TLBIALL(b, v) SET_GLOBAL_REG(GLOBAL_TLBIALL, (b), (v)) +#define SET_TLBIVMID(b, v) SET_GLOBAL_REG(TLBIVMID, (b), (v)) +#define SET_CR(b, v) SET_GLOBAL_REG(CR, (b), (v)) +#define SET_EAR(b, v) SET_GLOBAL_REG(EAR, (b), (v)) +#define SET_ESR(b, v) SET_GLOBAL_REG(ESR, (b), (v)) +#define SET_ESRRESTORE(b, v) SET_GLOBAL_REG(ESRRESTORE, (b), (v)) +#define SET_ESYNR0(b, v) SET_GLOBAL_REG(ESYNR0, (b), (v)) +#define SET_ESYNR1(b, v) SET_GLOBAL_REG(ESYNR1, (b), (v)) +#define SET_RPU_ACR(b, v) SET_GLOBAL_REG(RPU_ACR, (b), (v)) + +#define GET_M2VCBR_N(b, N) GET_GLOBAL_REG_N(M2VCBR_N, N, (b)) +#define GET_CBACR_N(b, N) GET_GLOBAL_REG_N(CBACR_N, N, (b)) +#define GET_TLBTR0(b) GET_GLOBAL_REG(TLBTR0, (b)) +#define GET_TLBTR1(b) GET_GLOBAL_REG(TLBTR1, (b)) +#define GET_TLBTR2(b) GET_GLOBAL_REG(TLBTR2, (b)) +#define GET_TESTBUSCR(b) GET_GLOBAL_REG(TESTBUSCR, (b)) +#define GET_GLOBAL_TLBIALL(b) GET_GLOBAL_REG(GLOBAL_TLBIALL, (b)) +#define GET_TLBIVMID(b) GET_GLOBAL_REG(TLBIVMID, (b)) +#define GET_CR(b) GET_GLOBAL_REG(CR, (b)) +#define GET_EAR(b) GET_GLOBAL_REG(EAR, (b)) +#define GET_ESR(b) GET_GLOBAL_REG(ESR, (b)) +#define GET_ESRRESTORE(b) GET_GLOBAL_REG(ESRRESTORE, (b)) +#define GET_ESYNR0(b) GET_GLOBAL_REG(ESYNR0, (b)) +#define GET_ESYNR1(b) GET_GLOBAL_REG(ESYNR1, (b)) +#define GET_REV(b) GET_GLOBAL_REG(REV, (b)) +#define GET_IDR(b) GET_GLOBAL_REG(IDR, (b)) +#define GET_RPU_ACR(b) GET_GLOBAL_REG(RPU_ACR, (b)) + + +/* Context register setters/getters */ +#define SET_SCTLR(b, c, v) SET_CTX_REG(SCTLR, (b), (c), (v)) +#define SET_ACTLR(b, c, v) SET_CTX_REG(ACTLR, (b), (c), (v)) +#define SET_CONTEXTIDR(b, c, v) SET_CTX_REG(CONTEXTIDR, (b), (c), (v)) +#define SET_TTBR0(b, c, v) SET_CTX_REG(TTBR0, (b), (c), (v)) +#define SET_TTBR1(b, c, v) SET_CTX_REG(TTBR1, (b), (c), (v)) +#define SET_TTBCR(b, c, v) SET_CTX_REG(TTBCR, (b), (c), (v)) +#define SET_PAR(b, c, v) SET_CTX_REG(PAR, (b), (c), (v)) +#define SET_FSR(b, c, v) SET_CTX_REG(FSR, (b), (c), (v)) +#define SET_FSRRESTORE(b, c, v) SET_CTX_REG(FSRRESTORE, (b), (c), (v)) +#define SET_FAR(b, c, v) SET_CTX_REG(FAR, (b), (c), (v)) +#define SET_FSYNR0(b, c, v) SET_CTX_REG(FSYNR0, (b), (c), (v)) +#define SET_FSYNR1(b, c, v) SET_CTX_REG(FSYNR1, (b), (c), (v)) +#define SET_PRRR(b, c, v) SET_CTX_REG(PRRR, (b), (c), (v)) +#define SET_NMRR(b, c, v) SET_CTX_REG(NMRR, (b), (c), (v)) +#define SET_TLBLKCR(b, c, v) SET_CTX_REG(TLBLCKR, (b), (c), (v)) +#define SET_V2PSR(b, c, v) SET_CTX_REG(V2PSR, (b), (c), (v)) +#define SET_TLBFLPTER(b, c, v) SET_CTX_REG(TLBFLPTER, (b), (c), (v)) +#define SET_TLBSLPTER(b, c, v) SET_CTX_REG(TLBSLPTER, (b), (c), (v)) +#define SET_BFBCR(b, c, v) SET_CTX_REG(BFBCR, (b), (c), (v)) +#define SET_CTX_TLBIALL(b, c, v) SET_CTX_REG(CTX_TLBIALL, (b), (c), (v)) +#define SET_TLBIASID(b, c, v) SET_CTX_REG(TLBIASID, (b), (c), (v)) +#define SET_TLBIVA(b, c, v) SET_CTX_REG(TLBIVA, (b), (c), (v)) +#define SET_TLBIVAA(b, c, v) SET_CTX_REG(TLBIVAA, (b), (c), (v)) +#define SET_V2PPR(b, c, v) SET_CTX_REG(V2PPR, (b), (c), (v)) +#define SET_V2PPW(b, c, v) SET_CTX_REG(V2PPW, (b), (c), (v)) +#define SET_V2PUR(b, c, v) SET_CTX_REG(V2PUR, (b), (c), (v)) +#define SET_V2PUW(b, c, v) SET_CTX_REG(V2PUW, (b), (c), (v)) +#define SET_RESUME(b, c, v) SET_CTX_REG(RESUME, (b), (c), (v)) + +#define GET_SCTLR(b, c) GET_CTX_REG(SCTLR, (b), (c)) +#define GET_ACTLR(b, c) GET_CTX_REG(ACTLR, (b), (c)) +#define GET_CONTEXTIDR(b, c) GET_CTX_REG(CONTEXTIDR, (b), (c)) +#define GET_TTBR0(b, c) GET_CTX_REG(TTBR0, (b), (c)) +#define GET_TTBR1(b, c) GET_CTX_REG(TTBR1, (b), (c)) +#define GET_TTBCR(b, c) GET_CTX_REG(TTBCR, (b), (c)) +#define GET_PAR(b, c) GET_CTX_REG(PAR, (b), (c)) +#define GET_FSR(b, c) GET_CTX_REG(FSR, (b), (c)) +#define GET_FSRRESTORE(b, c) GET_CTX_REG(FSRRESTORE, (b), (c)) +#define GET_FAR(b, c) GET_CTX_REG(FAR, (b), (c)) +#define GET_FSYNR0(b, c) GET_CTX_REG(FSYNR0, (b), (c)) +#define GET_FSYNR1(b, c) GET_CTX_REG(FSYNR1, (b), (c)) +#define GET_PRRR(b, c) GET_CTX_REG(PRRR, (b), (c)) +#define GET_NMRR(b, c) GET_CTX_REG(NMRR, (b), (c)) +#define GET_TLBLCKR(b, c) GET_CTX_REG(TLBLCKR, (b), (c)) +#define GET_V2PSR(b, c) GET_CTX_REG(V2PSR, (b), (c)) +#define GET_TLBFLPTER(b, c) GET_CTX_REG(TLBFLPTER, (b), (c)) +#define GET_TLBSLPTER(b, c) GET_CTX_REG(TLBSLPTER, (b), (c)) +#define GET_BFBCR(b, c) GET_CTX_REG(BFBCR, (b), (c)) +#define GET_CTX_TLBIALL(b, c) GET_CTX_REG(CTX_TLBIALL, (b), (c)) +#define GET_TLBIASID(b, c) GET_CTX_REG(TLBIASID, (b), (c)) +#define GET_TLBIVA(b, c) GET_CTX_REG(TLBIVA, (b), (c)) +#define GET_TLBIVAA(b, c) GET_CTX_REG(TLBIVAA, (b), (c)) +#define GET_V2PPR(b, c) GET_CTX_REG(V2PPR, (b), (c)) +#define GET_V2PPW(b, c) GET_CTX_REG(V2PPW, (b), (c)) +#define GET_V2PUR(b, c) GET_CTX_REG(V2PUR, (b), (c)) +#define GET_V2PUW(b, c) GET_CTX_REG(V2PUW, (b), (c)) +#define GET_RESUME(b, c) GET_CTX_REG(RESUME, (b), (c)) + + +/* Global field setters / getters */ +/* Global Field Setters: */ +/* CBACR_N */ +#define SET_RWVMID(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID, v) +#define SET_RWE(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE, v) +#define SET_RWGE(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE, v) +#define SET_CBVMID(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID, v) +#define SET_IRPTNDX(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX, v) + + +/* M2VCBR_N */ +#define SET_VMID(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID, v) +#define SET_CBNDX(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX, v) +#define SET_BYPASSD(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD, v) +#define SET_BPRCOSH(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH, v) +#define SET_BPRCISH(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH, v) +#define SET_BPRCNSH(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH, v) +#define SET_BPSHCFG(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG, v) +#define SET_NSCFG(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG, v) +#define SET_BPMTCFG(b, n, v) SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG, v) +#define SET_BPMEMTYPE(b, n, v) \ + SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE, v) + + +/* CR */ +#define SET_RPUE(b, v) SET_GLOBAL_FIELD(b, CR, RPUE, v) +#define SET_RPUERE(b, v) SET_GLOBAL_FIELD(b, CR, RPUERE, v) +#define SET_RPUEIE(b, v) SET_GLOBAL_FIELD(b, CR, RPUEIE, v) +#define SET_DCDEE(b, v) SET_GLOBAL_FIELD(b, CR, DCDEE, v) +#define SET_CLIENTPD(b, v) SET_GLOBAL_FIELD(b, CR, CLIENTPD, v) +#define SET_STALLD(b, v) SET_GLOBAL_FIELD(b, CR, STALLD, v) +#define SET_TLBLKCRWE(b, v) SET_GLOBAL_FIELD(b, CR, TLBLKCRWE, v) +#define SET_CR_TLBIALLCFG(b, v) SET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG, v) +#define SET_TLBIVMIDCFG(b, v) SET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG, v) +#define SET_CR_HUME(b, v) SET_GLOBAL_FIELD(b, CR, CR_HUME, v) + + +/* ESR */ +#define SET_CFG(b, v) SET_GLOBAL_FIELD(b, ESR, CFG, v) +#define SET_BYPASS(b, v) SET_GLOBAL_FIELD(b, ESR, BYPASS, v) +#define SET_ESR_MULTI(b, v) SET_GLOBAL_FIELD(b, ESR, ESR_MULTI, v) + + +/* ESYNR0 */ +#define SET_ESYNR0_AMID(b, v) SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID, v) +#define SET_ESYNR0_APID(b, v) SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID, v) +#define SET_ESYNR0_ABID(b, v) SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID, v) +#define SET_ESYNR0_AVMID(b, v) SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID, v) +#define SET_ESYNR0_ATID(b, v) SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID, v) + + +/* ESYNR1 */ +#define SET_ESYNR1_AMEMTYPE(b, v) \ + SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE, v) +#define SET_ESYNR1_ASHARED(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED, v) +#define SET_ESYNR1_AINNERSHARED(b, v) \ + SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED, v) +#define SET_ESYNR1_APRIV(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV, v) +#define SET_ESYNR1_APROTNS(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS, v) +#define SET_ESYNR1_AINST(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST, v) +#define SET_ESYNR1_AWRITE(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE, v) +#define SET_ESYNR1_ABURST(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST, v) +#define SET_ESYNR1_ALEN(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN, v) +#define SET_ESYNR1_ASIZE(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE, v) +#define SET_ESYNR1_ALOCK(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK, v) +#define SET_ESYNR1_AOOO(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO, v) +#define SET_ESYNR1_AFULL(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL, v) +#define SET_ESYNR1_AC(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC, v) +#define SET_ESYNR1_DCD(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD, v) + + +/* TESTBUSCR */ +#define SET_TBE(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, TBE, v) +#define SET_SPDMBE(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE, v) +#define SET_WGSEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL, v) +#define SET_TBLSEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL, v) +#define SET_TBHSEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL, v) +#define SET_SPDM0SEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL, v) +#define SET_SPDM1SEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL, v) +#define SET_SPDM2SEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL, v) +#define SET_SPDM3SEL(b, v) SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL, v) + + +/* TLBIVMID */ +#define SET_TLBIVMID_VMID(b, v) SET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID, v) + + +/* TLBRSW */ +#define SET_TLBRSW_INDEX(b, v) SET_GLOBAL_FIELD(b, TLBRSW, TLBRSW_INDEX, v) +#define SET_TLBBFBS(b, v) SET_GLOBAL_FIELD(b, TLBRSW, TLBBFBS, v) + + +/* TLBTR0 */ +#define SET_PR(b, v) SET_GLOBAL_FIELD(b, TLBTR0, PR, v) +#define SET_PW(b, v) SET_GLOBAL_FIELD(b, TLBTR0, PW, v) +#define SET_UR(b, v) SET_GLOBAL_FIELD(b, TLBTR0, UR, v) +#define SET_UW(b, v) SET_GLOBAL_FIELD(b, TLBTR0, UW, v) +#define SET_XN(b, v) SET_GLOBAL_FIELD(b, TLBTR0, XN, v) +#define SET_NSDESC(b, v) SET_GLOBAL_FIELD(b, TLBTR0, NSDESC, v) +#define SET_ISH(b, v) SET_GLOBAL_FIELD(b, TLBTR0, ISH, v) +#define SET_SH(b, v) SET_GLOBAL_FIELD(b, TLBTR0, SH, v) +#define SET_MT(b, v) SET_GLOBAL_FIELD(b, TLBTR0, MT, v) +#define SET_DPSIZR(b, v) SET_GLOBAL_FIELD(b, TLBTR0, DPSIZR, v) +#define SET_DPSIZC(b, v) SET_GLOBAL_FIELD(b, TLBTR0, DPSIZC, v) + + +/* TLBTR1 */ +#define SET_TLBTR1_VMID(b, v) SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID, v) +#define SET_TLBTR1_PA(b, v) SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA, v) + + +/* TLBTR2 */ +#define SET_TLBTR2_ASID(b, v) SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID, v) +#define SET_TLBTR2_V(b, v) SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V, v) +#define SET_TLBTR2_NSTID(b, v) SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID, v) +#define SET_TLBTR2_NV(b, v) SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV, v) +#define SET_TLBTR2_VA(b, v) SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA, v) + + +/* Global Field Getters */ +/* CBACR_N */ +#define GET_RWVMID(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID) +#define GET_RWE(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE) +#define GET_RWGE(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE) +#define GET_CBVMID(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID) +#define GET_IRPTNDX(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX) + + +/* M2VCBR_N */ +#define GET_VMID(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID) +#define GET_CBNDX(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX) +#define GET_BYPASSD(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD) +#define GET_BPRCOSH(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH) +#define GET_BPRCISH(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH) +#define GET_BPRCNSH(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH) +#define GET_BPSHCFG(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG) +#define GET_NSCFG(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG) +#define GET_BPMTCFG(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG) +#define GET_BPMEMTYPE(b, n) GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE) + + +/* CR */ +#define GET_RPUE(b) GET_GLOBAL_FIELD(b, CR, RPUE) +#define GET_RPUERE(b) GET_GLOBAL_FIELD(b, CR, RPUERE) +#define GET_RPUEIE(b) GET_GLOBAL_FIELD(b, CR, RPUEIE) +#define GET_DCDEE(b) GET_GLOBAL_FIELD(b, CR, DCDEE) +#define GET_CLIENTPD(b) GET_GLOBAL_FIELD(b, CR, CLIENTPD) +#define GET_STALLD(b) GET_GLOBAL_FIELD(b, CR, STALLD) +#define GET_TLBLKCRWE(b) GET_GLOBAL_FIELD(b, CR, TLBLKCRWE) +#define GET_CR_TLBIALLCFG(b) GET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG) +#define GET_TLBIVMIDCFG(b) GET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG) +#define GET_CR_HUME(b) GET_GLOBAL_FIELD(b, CR, CR_HUME) + + +/* ESR */ +#define GET_CFG(b) GET_GLOBAL_FIELD(b, ESR, CFG) +#define GET_BYPASS(b) GET_GLOBAL_FIELD(b, ESR, BYPASS) +#define GET_ESR_MULTI(b) GET_GLOBAL_FIELD(b, ESR, ESR_MULTI) + + +/* ESYNR0 */ +#define GET_ESYNR0_AMID(b) GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID) +#define GET_ESYNR0_APID(b) GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID) +#define GET_ESYNR0_ABID(b) GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID) +#define GET_ESYNR0_AVMID(b) GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID) +#define GET_ESYNR0_ATID(b) GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID) + + +/* ESYNR1 */ +#define GET_ESYNR1_AMEMTYPE(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE) +#define GET_ESYNR1_ASHARED(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED) +#define GET_ESYNR1_AINNERSHARED(b) \ + GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED) +#define GET_ESYNR1_APRIV(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV) +#define GET_ESYNR1_APROTNS(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS) +#define GET_ESYNR1_AINST(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST) +#define GET_ESYNR1_AWRITE(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE) +#define GET_ESYNR1_ABURST(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST) +#define GET_ESYNR1_ALEN(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN) +#define GET_ESYNR1_ASIZE(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE) +#define GET_ESYNR1_ALOCK(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK) +#define GET_ESYNR1_AOOO(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO) +#define GET_ESYNR1_AFULL(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL) +#define GET_ESYNR1_AC(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC) +#define GET_ESYNR1_DCD(b) GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD) + + +/* IDR */ +#define GET_NM2VCBMT(b) GET_GLOBAL_FIELD(b, IDR, NM2VCBMT) +#define GET_HTW(b) GET_GLOBAL_FIELD(b, IDR, HTW) +#define GET_HUM(b) GET_GLOBAL_FIELD(b, IDR, HUM) +#define GET_TLBSIZE(b) GET_GLOBAL_FIELD(b, IDR, TLBSIZE) +#define GET_NCB(b) GET_GLOBAL_FIELD(b, IDR, NCB) +#define GET_NIRPT(b) GET_GLOBAL_FIELD(b, IDR, NIRPT) + + +/* REV */ +#define GET_MAJOR(b) GET_GLOBAL_FIELD(b, REV, MAJOR) +#define GET_MINOR(b) GET_GLOBAL_FIELD(b, REV, MINOR) + + +/* TESTBUSCR */ +#define GET_TBE(b) GET_GLOBAL_FIELD(b, TESTBUSCR, TBE) +#define GET_SPDMBE(b) GET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE) +#define GET_WGSEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL) +#define GET_TBLSEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL) +#define GET_TBHSEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL) +#define GET_SPDM0SEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL) +#define GET_SPDM1SEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL) +#define GET_SPDM2SEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL) +#define GET_SPDM3SEL(b) GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL) + + +/* TLBIVMID */ +#define GET_TLBIVMID_VMID(b) GET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID) + + +/* TLBTR0 */ +#define GET_PR(b) GET_GLOBAL_FIELD(b, TLBTR0, PR) +#define GET_PW(b) GET_GLOBAL_FIELD(b, TLBTR0, PW) +#define GET_UR(b) GET_GLOBAL_FIELD(b, TLBTR0, UR) +#define GET_UW(b) GET_GLOBAL_FIELD(b, TLBTR0, UW) +#define GET_XN(b) GET_GLOBAL_FIELD(b, TLBTR0, XN) +#define GET_NSDESC(b) GET_GLOBAL_FIELD(b, TLBTR0, NSDESC) +#define GET_ISH(b) GET_GLOBAL_FIELD(b, TLBTR0, ISH) +#define GET_SH(b) GET_GLOBAL_FIELD(b, TLBTR0, SH) +#define GET_MT(b) GET_GLOBAL_FIELD(b, TLBTR0, MT) +#define GET_DPSIZR(b) GET_GLOBAL_FIELD(b, TLBTR0, DPSIZR) +#define GET_DPSIZC(b) GET_GLOBAL_FIELD(b, TLBTR0, DPSIZC) + + +/* TLBTR1 */ +#define GET_TLBTR1_VMID(b) GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID) +#define GET_TLBTR1_PA(b) GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA) + + +/* TLBTR2 */ +#define GET_TLBTR2_ASID(b) GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID) +#define GET_TLBTR2_V(b) GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V) +#define GET_TLBTR2_NSTID(b) GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID) +#define GET_TLBTR2_NV(b) GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV) +#define GET_TLBTR2_VA(b) GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA) + + +/* Context Register setters / getters */ +/* Context Register setters */ +/* ACTLR */ +#define SET_CFERE(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, CFERE, v) +#define SET_CFEIE(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, CFEIE, v) +#define SET_PTSHCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG, v) +#define SET_RCOSH(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, RCOSH, v) +#define SET_RCISH(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, RCISH, v) +#define SET_RCNSH(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, RCNSH, v) +#define SET_PRIVCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG, v) +#define SET_DNA(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, DNA, v) +#define SET_DNLV2PA(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA, v) +#define SET_TLBMCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG, v) +#define SET_CFCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, CFCFG, v) +#define SET_TIPCF(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, TIPCF, v) +#define SET_V2PCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG, v) +#define SET_HUME(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, HUME, v) +#define SET_PTMTCFG(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG, v) +#define SET_PTMEMTYPE(b, c, v) SET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE, v) + + +/* BFBCR */ +#define SET_BFBDFE(b, c, v) SET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE, v) +#define SET_BFBSFE(b, c, v) SET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE, v) +#define SET_SFVS(b, c, v) SET_CONTEXT_FIELD(b, c, BFBCR, SFVS, v) +#define SET_FLVIC(b, c, v) SET_CONTEXT_FIELD(b, c, BFBCR, FLVIC, v) +#define SET_SLVIC(b, c, v) SET_CONTEXT_FIELD(b, c, BFBCR, SLVIC, v) + + +/* CONTEXTIDR */ +#define SET_CONTEXTIDR_ASID(b, c, v) \ + SET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID, v) +#define SET_CONTEXTIDR_PROCID(b, c, v) \ + SET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID, v) + + +/* FSR */ +#define SET_TF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, TF, v) +#define SET_AFF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, AFF, v) +#define SET_APF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, APF, v) +#define SET_TLBMF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, TLBMF, v) +#define SET_HTWDEEF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, HTWDEEF, v) +#define SET_HTWSEEF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, HTWSEEF, v) +#define SET_MHF(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, MHF, v) +#define SET_SL(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, SL, v) +#define SET_SS(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, SS, v) +#define SET_MULTI(b, c, v) SET_CONTEXT_FIELD(b, c, FSR, MULTI, v) + + +/* FSYNR0 */ +#define SET_AMID(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR0, AMID, v) +#define SET_APID(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR0, APID, v) +#define SET_ABID(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR0, ABID, v) +#define SET_ATID(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR0, ATID, v) + + +/* FSYNR1 */ +#define SET_AMEMTYPE(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE, v) +#define SET_ASHARED(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED, v) +#define SET_AINNERSHARED(b, c, v) \ + SET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED, v) +#define SET_APRIV(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, APRIV, v) +#define SET_APROTNS(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS, v) +#define SET_AINST(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, AINST, v) +#define SET_AWRITE(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE, v) +#define SET_ABURST(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, ABURST, v) +#define SET_ALEN(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, ALEN, v) +#define SET_FSYNR1_ASIZE(b, c, v) \ + SET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE, v) +#define SET_ALOCK(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK, v) +#define SET_AFULL(b, c, v) SET_CONTEXT_FIELD(b, c, FSYNR1, AFULL, v) + + +/* NMRR */ +#define SET_ICPC0(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC0, v) +#define SET_ICPC1(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC1, v) +#define SET_ICPC2(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC2, v) +#define SET_ICPC3(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC3, v) +#define SET_ICPC4(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC4, v) +#define SET_ICPC5(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC5, v) +#define SET_ICPC6(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC6, v) +#define SET_ICPC7(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, ICPC7, v) +#define SET_OCPC0(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC0, v) +#define SET_OCPC1(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC1, v) +#define SET_OCPC2(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC2, v) +#define SET_OCPC3(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC3, v) +#define SET_OCPC4(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC4, v) +#define SET_OCPC5(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC5, v) +#define SET_OCPC6(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC6, v) +#define SET_OCPC7(b, c, v) SET_CONTEXT_FIELD(b, c, NMRR, OCPC7, v) + + +/* PAR */ +#define SET_FAULT(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT, v) + +#define SET_FAULT_TF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_TF, v) +#define SET_FAULT_AFF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF, v) +#define SET_FAULT_APF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_APF, v) +#define SET_FAULT_TLBMF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF, v) +#define SET_FAULT_HTWDEEF(b, c, v) \ + SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF, v) +#define SET_FAULT_HTWSEEF(b, c, v) \ + SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF, v) +#define SET_FAULT_MHF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF, v) +#define SET_FAULT_SL(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_SL, v) +#define SET_FAULT_SS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_SS, v) + +#define SET_NOFAULT_SS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SS, v) +#define SET_NOFAULT_MT(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_MT, v) +#define SET_NOFAULT_SH(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SH, v) +#define SET_NOFAULT_NS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NS, v) +#define SET_NOFAULT_NOS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NOS, v) +#define SET_NPFAULT_PA(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NPFAULT_PA, v) + + +/* PRRR */ +#define SET_MTC0(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC0, v) +#define SET_MTC1(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC1, v) +#define SET_MTC2(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC2, v) +#define SET_MTC3(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC3, v) +#define SET_MTC4(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC4, v) +#define SET_MTC5(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC5, v) +#define SET_MTC6(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC6, v) +#define SET_MTC7(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, MTC7, v) +#define SET_SHDSH0(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, SHDSH0, v) +#define SET_SHDSH1(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, SHDSH1, v) +#define SET_SHNMSH0(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0, v) +#define SET_SHNMSH1(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1, v) +#define SET_NOS0(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS0, v) +#define SET_NOS1(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS1, v) +#define SET_NOS2(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS2, v) +#define SET_NOS3(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS3, v) +#define SET_NOS4(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS4, v) +#define SET_NOS5(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS5, v) +#define SET_NOS6(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS6, v) +#define SET_NOS7(b, c, v) SET_CONTEXT_FIELD(b, c, PRRR, NOS7, v) + + +/* RESUME */ +#define SET_TNR(b, c, v) SET_CONTEXT_FIELD(b, c, RESUME, TNR, v) + + +/* SCTLR */ +#define SET_M(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, M, v) +#define SET_TRE(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, TRE, v) +#define SET_AFE(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, AFE, v) +#define SET_HAF(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, HAF, v) +#define SET_BE(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, BE, v) +#define SET_AFFD(b, c, v) SET_CONTEXT_FIELD(b, c, SCTLR, AFFD, v) + + +/* TLBLKCR */ +#define SET_LKE(b, c, v) SET_CONTEXT_FIELD(b, c, TLBLKCR, LKE, v) +#define SET_TLBLKCR_TLBIALLCFG(b, c, v) \ + SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG, v) +#define SET_TLBIASIDCFG(b, c, v) \ + SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG, v) +#define SET_TLBIVAACFG(b, c, v) SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG, v) +#define SET_FLOOR(b, c, v) SET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR, v) +#define SET_VICTIM(b, c, v) SET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM, v) + + +/* TTBCR */ +#define SET_N(b, c, v) SET_CONTEXT_FIELD(b, c, TTBCR, N, v) +#define SET_PD0(b, c, v) SET_CONTEXT_FIELD(b, c, TTBCR, PD0, v) +#define SET_PD1(b, c, v) SET_CONTEXT_FIELD(b, c, TTBCR, PD1, v) + + +/* TTBR0 */ +#define SET_TTBR0_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH, v) +#define SET_TTBR0_SH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH, v) +#define SET_TTBR0_ORGN(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN, v) +#define SET_TTBR0_NOS(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS, v) +#define SET_TTBR0_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL, v) +#define SET_TTBR0_PA(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA, v) + + +/* TTBR1 */ +#define SET_TTBR1_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH, v) +#define SET_TTBR1_SH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH, v) +#define SET_TTBR1_ORGN(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN, v) +#define SET_TTBR1_NOS(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS, v) +#define SET_TTBR1_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL, v) +#define SET_TTBR1_PA(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA, v) + + +/* V2PSR */ +#define SET_HIT(b, c, v) SET_CONTEXT_FIELD(b, c, V2PSR, HIT, v) +#define SET_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PSR, INDEX, v) + + +/* V2Pxx UW UR PW PR */ +#define SET_V2PUW_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_INDEX, v) +#define SET_V2PUW_VA(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_VA, v) + +#define SET_V2PUR_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_INDEX, v) +#define SET_V2PUR_VA(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_VA, v) + +#define SET_V2PPW_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_INDEX, v) +#define SET_V2PPW_VA(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_VA, v) + +#define SET_V2PPR_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_INDEX, v) +#define SET_V2PPR_VA(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_VA, v) + + +/* Context Register getters */ +/* ACTLR */ +#define GET_CFERE(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, CFERE) +#define GET_CFEIE(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, CFEIE) +#define GET_PTSHCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG) +#define GET_RCOSH(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, RCOSH) +#define GET_RCISH(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, RCISH) +#define GET_RCNSH(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, RCNSH) +#define GET_PRIVCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG) +#define GET_DNA(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, DNA) +#define GET_DNLV2PA(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA) +#define GET_TLBMCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG) +#define GET_CFCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, CFCFG) +#define GET_TIPCF(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, TIPCF) +#define GET_V2PCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG) +#define GET_HUME(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, HUME) +#define GET_PTMTCFG(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG) +#define GET_PTMEMTYPE(b, c) GET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE) + +/* BFBCR */ +#define GET_BFBDFE(b, c) GET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE) +#define GET_BFBSFE(b, c) GET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE) +#define GET_SFVS(b, c) GET_CONTEXT_FIELD(b, c, BFBCR, SFVS) +#define GET_FLVIC(b, c) GET_CONTEXT_FIELD(b, c, BFBCR, FLVIC) +#define GET_SLVIC(b, c) GET_CONTEXT_FIELD(b, c, BFBCR, SLVIC) + + +/* CONTEXTIDR */ +#define GET_CONTEXTIDR_ASID(b, c) \ + GET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID) +#define GET_CONTEXTIDR_PROCID(b, c) GET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID) + + +/* FSR */ +#define GET_TF(b, c) GET_CONTEXT_FIELD(b, c, FSR, TF) +#define GET_AFF(b, c) GET_CONTEXT_FIELD(b, c, FSR, AFF) +#define GET_APF(b, c) GET_CONTEXT_FIELD(b, c, FSR, APF) +#define GET_TLBMF(b, c) GET_CONTEXT_FIELD(b, c, FSR, TLBMF) +#define GET_HTWDEEF(b, c) GET_CONTEXT_FIELD(b, c, FSR, HTWDEEF) +#define GET_HTWSEEF(b, c) GET_CONTEXT_FIELD(b, c, FSR, HTWSEEF) +#define GET_MHF(b, c) GET_CONTEXT_FIELD(b, c, FSR, MHF) +#define GET_SL(b, c) GET_CONTEXT_FIELD(b, c, FSR, SL) +#define GET_SS(b, c) GET_CONTEXT_FIELD(b, c, FSR, SS) +#define GET_MULTI(b, c) GET_CONTEXT_FIELD(b, c, FSR, MULTI) + + +/* FSYNR0 */ +#define GET_AMID(b, c) GET_CONTEXT_FIELD(b, c, FSYNR0, AMID) +#define GET_APID(b, c) GET_CONTEXT_FIELD(b, c, FSYNR0, APID) +#define GET_ABID(b, c) GET_CONTEXT_FIELD(b, c, FSYNR0, ABID) +#define GET_ATID(b, c) GET_CONTEXT_FIELD(b, c, FSYNR0, ATID) + + +/* FSYNR1 */ +#define GET_AMEMTYPE(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE) +#define GET_ASHARED(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED) +#define GET_AINNERSHARED(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED) +#define GET_APRIV(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, APRIV) +#define GET_APROTNS(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS) +#define GET_AINST(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, AINST) +#define GET_AWRITE(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE) +#define GET_ABURST(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, ABURST) +#define GET_ALEN(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, ALEN) +#define GET_FSYNR1_ASIZE(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE) +#define GET_ALOCK(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK) +#define GET_AFULL(b, c) GET_CONTEXT_FIELD(b, c, FSYNR1, AFULL) + + +/* NMRR */ +#define GET_ICPC0(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC0) +#define GET_ICPC1(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC1) +#define GET_ICPC2(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC2) +#define GET_ICPC3(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC3) +#define GET_ICPC4(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC4) +#define GET_ICPC5(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC5) +#define GET_ICPC6(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC6) +#define GET_ICPC7(b, c) GET_CONTEXT_FIELD(b, c, NMRR, ICPC7) +#define GET_OCPC0(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC0) +#define GET_OCPC1(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC1) +#define GET_OCPC2(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC2) +#define GET_OCPC3(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC3) +#define GET_OCPC4(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC4) +#define GET_OCPC5(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC5) +#define GET_OCPC6(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC6) +#define GET_OCPC7(b, c) GET_CONTEXT_FIELD(b, c, NMRR, OCPC7) + + +/* PAR */ +#define GET_FAULT(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT) + +#define GET_FAULT_TF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_TF) +#define GET_FAULT_AFF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF) +#define GET_FAULT_APF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_APF) +#define GET_FAULT_TLBMF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF) +#define GET_FAULT_HTWDEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF) +#define GET_FAULT_HTWSEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF) +#define GET_FAULT_MHF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF) +#define GET_FAULT_SL(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_SL) +#define GET_FAULT_SS(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_SS) + +#define GET_NOFAULT_SS(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SS) +#define GET_NOFAULT_MT(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_MT) +#define GET_NOFAULT_SH(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SH) +#define GET_NOFAULT_NS(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NS) +#define GET_NOFAULT_NOS(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NOS) +#define GET_NPFAULT_PA(b, c) GET_CONTEXT_FIELD(b, c, PAR, PAR_NPFAULT_PA) + + +/* PRRR */ +#define GET_MTC0(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC0) +#define GET_MTC1(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC1) +#define GET_MTC2(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC2) +#define GET_MTC3(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC3) +#define GET_MTC4(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC4) +#define GET_MTC5(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC5) +#define GET_MTC6(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC6) +#define GET_MTC7(b, c) GET_CONTEXT_FIELD(b, c, PRRR, MTC7) +#define GET_SHDSH0(b, c) GET_CONTEXT_FIELD(b, c, PRRR, SHDSH0) +#define GET_SHDSH1(b, c) GET_CONTEXT_FIELD(b, c, PRRR, SHDSH1) +#define GET_SHNMSH0(b, c) GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0) +#define GET_SHNMSH1(b, c) GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1) +#define GET_NOS0(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS0) +#define GET_NOS1(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS1) +#define GET_NOS2(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS2) +#define GET_NOS3(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS3) +#define GET_NOS4(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS4) +#define GET_NOS5(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS5) +#define GET_NOS6(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS6) +#define GET_NOS7(b, c) GET_CONTEXT_FIELD(b, c, PRRR, NOS7) + + +/* RESUME */ +#define GET_TNR(b, c) GET_CONTEXT_FIELD(b, c, RESUME, TNR) + + +/* SCTLR */ +#define GET_M(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, M) +#define GET_TRE(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, TRE) +#define GET_AFE(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, AFE) +#define GET_HAF(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, HAF) +#define GET_BE(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, BE) +#define GET_AFFD(b, c) GET_CONTEXT_FIELD(b, c, SCTLR, AFFD) + + +/* TLBLKCR */ +#define GET_LKE(b, c) GET_CONTEXT_FIELD(b, c, TLBLKCR, LKE) +#define GET_TLBLCKR_TLBIALLCFG(b, c) \ + GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG) +#define GET_TLBIASIDCFG(b, c) GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG) +#define GET_TLBIVAACFG(b, c) GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG) +#define GET_FLOOR(b, c) GET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR) +#define GET_VICTIM(b, c) GET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM) + + +/* TTBCR */ +#define GET_N(b, c) GET_CONTEXT_FIELD(b, c, TTBCR, N) +#define GET_PD0(b, c) GET_CONTEXT_FIELD(b, c, TTBCR, PD0) +#define GET_PD1(b, c) GET_CONTEXT_FIELD(b, c, TTBCR, PD1) + + +/* TTBR0 */ +#define GET_TTBR0_IRGNH(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH) +#define GET_TTBR0_SH(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH) +#define GET_TTBR0_ORGN(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN) +#define GET_TTBR0_NOS(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS) +#define GET_TTBR0_IRGNL(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL) +#define GET_TTBR0_PA(b, c) GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA) + + +/* TTBR1 */ +#define GET_TTBR1_IRGNH(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH) +#define GET_TTBR1_SH(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH) +#define GET_TTBR1_ORGN(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN) +#define GET_TTBR1_NOS(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS) +#define GET_TTBR1_IRGNL(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL) +#define GET_TTBR1_PA(b, c) GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA) + + +/* V2PSR */ +#define GET_HIT(b, c) GET_CONTEXT_FIELD(b, c, V2PSR, HIT) +#define GET_INDEX(b, c) GET_CONTEXT_FIELD(b, c, V2PSR, INDEX) + + +/* V2Pxx UW UR PW PR */ +#define GET_V2PUW_INDEX(b, c) GET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_INDEX) +#define GET_V2PUW_VA(b, c) GET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_VA) + +#define GET_V2PUR_INDEX(b, c) GET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_INDEX) +#define GET_V2PUR_VA(b, c) GET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_VA) + +#define GET_V2PPW_INDEX(b, c) GET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_INDEX) +#define GET_V2PPW_VA(b, c) GET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_VA) + +#define GET_V2PPR_INDEX(b, c) GET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_INDEX) +#define GET_V2PPR_VA(b, c) GET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_VA) + + +/* Global Registers */ +#define M2VCBR_N (0xFF000) +#define CBACR_N (0xFF800) +#define TLBRSW (0xFFE00) +#define TLBTR0 (0xFFE80) +#define TLBTR1 (0xFFE84) +#define TLBTR2 (0xFFE88) +#define TESTBUSCR (0xFFE8C) +#define GLOBAL_TLBIALL (0xFFF00) +#define TLBIVMID (0xFFF04) +#define CR (0xFFF80) +#define EAR (0xFFF84) +#define ESR (0xFFF88) +#define ESRRESTORE (0xFFF8C) +#define ESYNR0 (0xFFF90) +#define ESYNR1 (0xFFF94) +#define REV (0xFFFF4) +#define IDR (0xFFFF8) +#define RPU_ACR (0xFFFFC) + + +/* Context Bank Registers */ +#define SCTLR (0x000) +#define ACTLR (0x004) +#define CONTEXTIDR (0x008) +#define TTBR0 (0x010) +#define TTBR1 (0x014) +#define TTBCR (0x018) +#define PAR (0x01C) +#define FSR (0x020) +#define FSRRESTORE (0x024) +#define FAR (0x028) +#define FSYNR0 (0x02C) +#define FSYNR1 (0x030) +#define PRRR (0x034) +#define NMRR (0x038) +#define TLBLCKR (0x03C) +#define V2PSR (0x040) +#define TLBFLPTER (0x044) +#define TLBSLPTER (0x048) +#define BFBCR (0x04C) +#define CTX_TLBIALL (0x800) +#define TLBIASID (0x804) +#define TLBIVA (0x808) +#define TLBIVAA (0x80C) +#define V2PPR (0x810) +#define V2PPW (0x814) +#define V2PUR (0x818) +#define V2PUW (0x81C) +#define RESUME (0x820) + + +/* Global Register Fields */ +/* CBACRn */ +#define RWVMID (RWVMID_MASK << RWVMID_SHIFT) +#define RWE (RWE_MASK << RWE_SHIFT) +#define RWGE (RWGE_MASK << RWGE_SHIFT) +#define CBVMID (CBVMID_MASK << CBVMID_SHIFT) +#define IRPTNDX (IRPTNDX_MASK << IRPTNDX_SHIFT) + + +/* CR */ +#define RPUE (RPUE_MASK << RPUE_SHIFT) +#define RPUERE (RPUERE_MASK << RPUERE_SHIFT) +#define RPUEIE (RPUEIE_MASK << RPUEIE_SHIFT) +#define DCDEE (DCDEE_MASK << DCDEE_SHIFT) +#define CLIENTPD (CLIENTPD_MASK << CLIENTPD_SHIFT) +#define STALLD (STALLD_MASK << STALLD_SHIFT) +#define TLBLKCRWE (TLBLKCRWE_MASK << TLBLKCRWE_SHIFT) +#define CR_TLBIALLCFG (CR_TLBIALLCFG_MASK << CR_TLBIALLCFG_SHIFT) +#define TLBIVMIDCFG (TLBIVMIDCFG_MASK << TLBIVMIDCFG_SHIFT) +#define CR_HUME (CR_HUME_MASK << CR_HUME_SHIFT) + + +/* ESR */ +#define CFG (CFG_MASK << CFG_SHIFT) +#define BYPASS (BYPASS_MASK << BYPASS_SHIFT) +#define ESR_MULTI (ESR_MULTI_MASK << ESR_MULTI_SHIFT) + + +/* ESYNR0 */ +#define ESYNR0_AMID (ESYNR0_AMID_MASK << ESYNR0_AMID_SHIFT) +#define ESYNR0_APID (ESYNR0_APID_MASK << ESYNR0_APID_SHIFT) +#define ESYNR0_ABID (ESYNR0_ABID_MASK << ESYNR0_ABID_SHIFT) +#define ESYNR0_AVMID (ESYNR0_AVMID_MASK << ESYNR0_AVMID_SHIFT) +#define ESYNR0_ATID (ESYNR0_ATID_MASK << ESYNR0_ATID_SHIFT) + + +/* ESYNR1 */ +#define ESYNR1_AMEMTYPE (ESYNR1_AMEMTYPE_MASK << ESYNR1_AMEMTYPE_SHIFT) +#define ESYNR1_ASHARED (ESYNR1_ASHARED_MASK << ESYNR1_ASHARED_SHIFT) +#define ESYNR1_AINNERSHARED (ESYNR1_AINNERSHARED_MASK<< \ + ESYNR1_AINNERSHARED_SHIFT) +#define ESYNR1_APRIV (ESYNR1_APRIV_MASK << ESYNR1_APRIV_SHIFT) +#define ESYNR1_APROTNS (ESYNR1_APROTNS_MASK << ESYNR1_APROTNS_SHIFT) +#define ESYNR1_AINST (ESYNR1_AINST_MASK << ESYNR1_AINST_SHIFT) +#define ESYNR1_AWRITE (ESYNR1_AWRITE_MASK << ESYNR1_AWRITE_SHIFT) +#define ESYNR1_ABURST (ESYNR1_ABURST_MASK << ESYNR1_ABURST_SHIFT) +#define ESYNR1_ALEN (ESYNR1_ALEN_MASK << ESYNR1_ALEN_SHIFT) +#define ESYNR1_ASIZE (ESYNR1_ASIZE_MASK << ESYNR1_ASIZE_SHIFT) +#define ESYNR1_ALOCK (ESYNR1_ALOCK_MASK << ESYNR1_ALOCK_SHIFT) +#define ESYNR1_AOOO (ESYNR1_AOOO_MASK << ESYNR1_AOOO_SHIFT) +#define ESYNR1_AFULL (ESYNR1_AFULL_MASK << ESYNR1_AFULL_SHIFT) +#define ESYNR1_AC (ESYNR1_AC_MASK << ESYNR1_AC_SHIFT) +#define ESYNR1_DCD (ESYNR1_DCD_MASK << ESYNR1_DCD_SHIFT) + + +/* IDR */ +#define NM2VCBMT (NM2VCBMT_MASK << NM2VCBMT_SHIFT) +#define HTW (HTW_MASK << HTW_SHIFT) +#define HUM (HUM_MASK << HUM_SHIFT) +#define TLBSIZE (TLBSIZE_MASK << TLBSIZE_SHIFT) +#define NCB (NCB_MASK << NCB_SHIFT) +#define NIRPT (NIRPT_MASK << NIRPT_SHIFT) + + +/* M2VCBRn */ +#define VMID (VMID_MASK << VMID_SHIFT) +#define CBNDX (CBNDX_MASK << CBNDX_SHIFT) +#define BYPASSD (BYPASSD_MASK << BYPASSD_SHIFT) +#define BPRCOSH (BPRCOSH_MASK << BPRCOSH_SHIFT) +#define BPRCISH (BPRCISH_MASK << BPRCISH_SHIFT) +#define BPRCNSH (BPRCNSH_MASK << BPRCNSH_SHIFT) +#define BPSHCFG (BPSHCFG_MASK << BPSHCFG_SHIFT) +#define NSCFG (NSCFG_MASK << NSCFG_SHIFT) +#define BPMTCFG (BPMTCFG_MASK << BPMTCFG_SHIFT) +#define BPMEMTYPE (BPMEMTYPE_MASK << BPMEMTYPE_SHIFT) + + +/* REV */ +#define IDR_MINOR (MINOR_MASK << MINOR_SHIFT) +#define IDR_MAJOR (MAJOR_MASK << MAJOR_SHIFT) + + +/* TESTBUSCR */ +#define TBE (TBE_MASK << TBE_SHIFT) +#define SPDMBE (SPDMBE_MASK << SPDMBE_SHIFT) +#define WGSEL (WGSEL_MASK << WGSEL_SHIFT) +#define TBLSEL (TBLSEL_MASK << TBLSEL_SHIFT) +#define TBHSEL (TBHSEL_MASK << TBHSEL_SHIFT) +#define SPDM0SEL (SPDM0SEL_MASK << SPDM0SEL_SHIFT) +#define SPDM1SEL (SPDM1SEL_MASK << SPDM1SEL_SHIFT) +#define SPDM2SEL (SPDM2SEL_MASK << SPDM2SEL_SHIFT) +#define SPDM3SEL (SPDM3SEL_MASK << SPDM3SEL_SHIFT) + + +/* TLBIVMID */ +#define TLBIVMID_VMID (TLBIVMID_VMID_MASK << TLBIVMID_VMID_SHIFT) + + +/* TLBRSW */ +#define TLBRSW_INDEX (TLBRSW_INDEX_MASK << TLBRSW_INDEX_SHIFT) +#define TLBBFBS (TLBBFBS_MASK << TLBBFBS_SHIFT) + + +/* TLBTR0 */ +#define PR (PR_MASK << PR_SHIFT) +#define PW (PW_MASK << PW_SHIFT) +#define UR (UR_MASK << UR_SHIFT) +#define UW (UW_MASK << UW_SHIFT) +#define XN (XN_MASK << XN_SHIFT) +#define NSDESC (NSDESC_MASK << NSDESC_SHIFT) +#define ISH (ISH_MASK << ISH_SHIFT) +#define SH (SH_MASK << SH_SHIFT) +#define MT (MT_MASK << MT_SHIFT) +#define DPSIZR (DPSIZR_MASK << DPSIZR_SHIFT) +#define DPSIZC (DPSIZC_MASK << DPSIZC_SHIFT) + + +/* TLBTR1 */ +#define TLBTR1_VMID (TLBTR1_VMID_MASK << TLBTR1_VMID_SHIFT) +#define TLBTR1_PA (TLBTR1_PA_MASK << TLBTR1_PA_SHIFT) + + +/* TLBTR2 */ +#define TLBTR2_ASID (TLBTR2_ASID_MASK << TLBTR2_ASID_SHIFT) +#define TLBTR2_V (TLBTR2_V_MASK << TLBTR2_V_SHIFT) +#define TLBTR2_NSTID (TLBTR2_NSTID_MASK << TLBTR2_NSTID_SHIFT) +#define TLBTR2_NV (TLBTR2_NV_MASK << TLBTR2_NV_SHIFT) +#define TLBTR2_VA (TLBTR2_VA_MASK << TLBTR2_VA_SHIFT) + + +/* Context Register Fields */ +/* ACTLR */ +#define CFERE (CFERE_MASK << CFERE_SHIFT) +#define CFEIE (CFEIE_MASK << CFEIE_SHIFT) +#define PTSHCFG (PTSHCFG_MASK << PTSHCFG_SHIFT) +#define RCOSH (RCOSH_MASK << RCOSH_SHIFT) +#define RCISH (RCISH_MASK << RCISH_SHIFT) +#define RCNSH (RCNSH_MASK << RCNSH_SHIFT) +#define PRIVCFG (PRIVCFG_MASK << PRIVCFG_SHIFT) +#define DNA (DNA_MASK << DNA_SHIFT) +#define DNLV2PA (DNLV2PA_MASK << DNLV2PA_SHIFT) +#define TLBMCFG (TLBMCFG_MASK << TLBMCFG_SHIFT) +#define CFCFG (CFCFG_MASK << CFCFG_SHIFT) +#define TIPCF (TIPCF_MASK << TIPCF_SHIFT) +#define V2PCFG (V2PCFG_MASK << V2PCFG_SHIFT) +#define HUME (HUME_MASK << HUME_SHIFT) +#define PTMTCFG (PTMTCFG_MASK << PTMTCFG_SHIFT) +#define PTMEMTYPE (PTMEMTYPE_MASK << PTMEMTYPE_SHIFT) + + +/* BFBCR */ +#define BFBDFE (BFBDFE_MASK << BFBDFE_SHIFT) +#define BFBSFE (BFBSFE_MASK << BFBSFE_SHIFT) +#define SFVS (SFVS_MASK << SFVS_SHIFT) +#define FLVIC (FLVIC_MASK << FLVIC_SHIFT) +#define SLVIC (SLVIC_MASK << SLVIC_SHIFT) + + +/* CONTEXTIDR */ +#define CONTEXTIDR_ASID (CONTEXTIDR_ASID_MASK << CONTEXTIDR_ASID_SHIFT) +#define PROCID (PROCID_MASK << PROCID_SHIFT) + + +/* FSR */ +#define TF (TF_MASK << TF_SHIFT) +#define AFF (AFF_MASK << AFF_SHIFT) +#define APF (APF_MASK << APF_SHIFT) +#define TLBMF (TLBMF_MASK << TLBMF_SHIFT) +#define HTWDEEF (HTWDEEF_MASK << HTWDEEF_SHIFT) +#define HTWSEEF (HTWSEEF_MASK << HTWSEEF_SHIFT) +#define MHF (MHF_MASK << MHF_SHIFT) +#define SL (SL_MASK << SL_SHIFT) +#define SS (SS_MASK << SS_SHIFT) +#define MULTI (MULTI_MASK << MULTI_SHIFT) + + +/* FSYNR0 */ +#define AMID (AMID_MASK << AMID_SHIFT) +#define APID (APID_MASK << APID_SHIFT) +#define ABID (ABID_MASK << ABID_SHIFT) +#define ATID (ATID_MASK << ATID_SHIFT) + + +/* FSYNR1 */ +#define AMEMTYPE (AMEMTYPE_MASK << AMEMTYPE_SHIFT) +#define ASHARED (ASHARED_MASK << ASHARED_SHIFT) +#define AINNERSHARED (AINNERSHARED_MASK << AINNERSHARED_SHIFT) +#define APRIV (APRIV_MASK << APRIV_SHIFT) +#define APROTNS (APROTNS_MASK << APROTNS_SHIFT) +#define AINST (AINST_MASK << AINST_SHIFT) +#define AWRITE (AWRITE_MASK << AWRITE_SHIFT) +#define ABURST (ABURST_MASK << ABURST_SHIFT) +#define ALEN (ALEN_MASK << ALEN_SHIFT) +#define FSYNR1_ASIZE (FSYNR1_ASIZE_MASK << FSYNR1_ASIZE_SHIFT) +#define ALOCK (ALOCK_MASK << ALOCK_SHIFT) +#define AFULL (AFULL_MASK << AFULL_SHIFT) + + +/* NMRR */ +#define ICPC0 (ICPC0_MASK << ICPC0_SHIFT) +#define ICPC1 (ICPC1_MASK << ICPC1_SHIFT) +#define ICPC2 (ICPC2_MASK << ICPC2_SHIFT) +#define ICPC3 (ICPC3_MASK << ICPC3_SHIFT) +#define ICPC4 (ICPC4_MASK << ICPC4_SHIFT) +#define ICPC5 (ICPC5_MASK << ICPC5_SHIFT) +#define ICPC6 (ICPC6_MASK << ICPC6_SHIFT) +#define ICPC7 (ICPC7_MASK << ICPC7_SHIFT) +#define OCPC0 (OCPC0_MASK << OCPC0_SHIFT) +#define OCPC1 (OCPC1_MASK << OCPC1_SHIFT) +#define OCPC2 (OCPC2_MASK << OCPC2_SHIFT) +#define OCPC3 (OCPC3_MASK << OCPC3_SHIFT) +#define OCPC4 (OCPC4_MASK << OCPC4_SHIFT) +#define OCPC5 (OCPC5_MASK << OCPC5_SHIFT) +#define OCPC6 (OCPC6_MASK << OCPC6_SHIFT) +#define OCPC7 (OCPC7_MASK << OCPC7_SHIFT) + + +/* PAR */ +#define FAULT (FAULT_MASK << FAULT_SHIFT) +/* If a fault is present, these are the +same as the fault fields in the FAR */ +#define FAULT_TF (FAULT_TF_MASK << FAULT_TF_SHIFT) +#define FAULT_AFF (FAULT_AFF_MASK << FAULT_AFF_SHIFT) +#define FAULT_APF (FAULT_APF_MASK << FAULT_APF_SHIFT) +#define FAULT_TLBMF (FAULT_TLBMF_MASK << FAULT_TLBMF_SHIFT) +#define FAULT_HTWDEEF (FAULT_HTWDEEF_MASK << FAULT_HTWDEEF_SHIFT) +#define FAULT_HTWSEEF (FAULT_HTWSEEF_MASK << FAULT_HTWSEEF_SHIFT) +#define FAULT_MHF (FAULT_MHF_MASK << FAULT_MHF_SHIFT) +#define FAULT_SL (FAULT_SL_MASK << FAULT_SL_SHIFT) +#define FAULT_SS (FAULT_SS_MASK << FAULT_SS_SHIFT) + +/* If NO fault is present, the following fields are in effect */ +/* (FAULT remains as before) */ +#define PAR_NOFAULT_SS (PAR_NOFAULT_SS_MASK << PAR_NOFAULT_SS_SHIFT) +#define PAR_NOFAULT_MT (PAR_NOFAULT_MT_MASK << PAR_NOFAULT_MT_SHIFT) +#define PAR_NOFAULT_SH (PAR_NOFAULT_SH_MASK << PAR_NOFAULT_SH_SHIFT) +#define PAR_NOFAULT_NS (PAR_NOFAULT_NS_MASK << PAR_NOFAULT_NS_SHIFT) +#define PAR_NOFAULT_NOS (PAR_NOFAULT_NOS_MASK << PAR_NOFAULT_NOS_SHIFT) +#define PAR_NPFAULT_PA (PAR_NPFAULT_PA_MASK << PAR_NPFAULT_PA_SHIFT) + + +/* PRRR */ +#define MTC0 (MTC0_MASK << MTC0_SHIFT) +#define MTC1 (MTC1_MASK << MTC1_SHIFT) +#define MTC2 (MTC2_MASK << MTC2_SHIFT) +#define MTC3 (MTC3_MASK << MTC3_SHIFT) +#define MTC4 (MTC4_MASK << MTC4_SHIFT) +#define MTC5 (MTC5_MASK << MTC5_SHIFT) +#define MTC6 (MTC6_MASK << MTC6_SHIFT) +#define MTC7 (MTC7_MASK << MTC7_SHIFT) +#define SHDSH0 (SHDSH0_MASK << SHDSH0_SHIFT) +#define SHDSH1 (SHDSH1_MASK << SHDSH1_SHIFT) +#define SHNMSH0 (SHNMSH0_MASK << SHNMSH0_SHIFT) +#define SHNMSH1 (SHNMSH1_MASK << SHNMSH1_SHIFT) +#define NOS0 (NOS0_MASK << NOS0_SHIFT) +#define NOS1 (NOS1_MASK << NOS1_SHIFT) +#define NOS2 (NOS2_MASK << NOS2_SHIFT) +#define NOS3 (NOS3_MASK << NOS3_SHIFT) +#define NOS4 (NOS4_MASK << NOS4_SHIFT) +#define NOS5 (NOS5_MASK << NOS5_SHIFT) +#define NOS6 (NOS6_MASK << NOS6_SHIFT) +#define NOS7 (NOS7_MASK << NOS7_SHIFT) + + +/* RESUME */ +#define TNR (TNR_MASK << TNR_SHIFT) + + +/* SCTLR */ +#define M (M_MASK << M_SHIFT) +#define TRE (TRE_MASK << TRE_SHIFT) +#define AFE (AFE_MASK << AFE_SHIFT) +#define HAF (HAF_MASK << HAF_SHIFT) +#define BE (BE_MASK << BE_SHIFT) +#define AFFD (AFFD_MASK << AFFD_SHIFT) + + +/* TLBIASID */ +#define TLBIASID_ASID (TLBIASID_ASID_MASK << TLBIASID_ASID_SHIFT) + + +/* TLBIVA */ +#define TLBIVA_ASID (TLBIVA_ASID_MASK << TLBIVA_ASID_SHIFT) +#define TLBIVA_VA (TLBIVA_VA_MASK << TLBIVA_VA_SHIFT) + + +/* TLBIVAA */ +#define TLBIVAA_VA (TLBIVAA_VA_MASK << TLBIVAA_VA_SHIFT) + + +/* TLBLCKR */ +#define LKE (LKE_MASK << LKE_SHIFT) +#define TLBLCKR_TLBIALLCFG (TLBLCKR_TLBIALLCFG_MASK<<TLBLCKR_TLBIALLCFG_SHIFT) +#define TLBIASIDCFG (TLBIASIDCFG_MASK << TLBIASIDCFG_SHIFT) +#define TLBIVAACFG (TLBIVAACFG_MASK << TLBIVAACFG_SHIFT) +#define FLOOR (FLOOR_MASK << FLOOR_SHIFT) +#define VICTIM (VICTIM_MASK << VICTIM_SHIFT) + + +/* TTBCR */ +#define N (N_MASK << N_SHIFT) +#define PD0 (PD0_MASK << PD0_SHIFT) +#define PD1 (PD1_MASK << PD1_SHIFT) + + +/* TTBR0 */ +#define TTBR0_IRGNH (TTBR0_IRGNH_MASK << TTBR0_IRGNH_SHIFT) +#define TTBR0_SH (TTBR0_SH_MASK << TTBR0_SH_SHIFT) +#define TTBR0_ORGN (TTBR0_ORGN_MASK << TTBR0_ORGN_SHIFT) +#define TTBR0_NOS (TTBR0_NOS_MASK << TTBR0_NOS_SHIFT) +#define TTBR0_IRGNL (TTBR0_IRGNL_MASK << TTBR0_IRGNL_SHIFT) +#define TTBR0_PA (TTBR0_PA_MASK << TTBR0_PA_SHIFT) + + +/* TTBR1 */ +#define TTBR1_IRGNH (TTBR1_IRGNH_MASK << TTBR1_IRGNH_SHIFT) +#define TTBR1_SH (TTBR1_SH_MASK << TTBR1_SH_SHIFT) +#define TTBR1_ORGN (TTBR1_ORGN_MASK << TTBR1_ORGN_SHIFT) +#define TTBR1_NOS (TTBR1_NOS_MASK << TTBR1_NOS_SHIFT) +#define TTBR1_IRGNL (TTBR1_IRGNL_MASK << TTBR1_IRGNL_SHIFT) +#define TTBR1_PA (TTBR1_PA_MASK << TTBR1_PA_SHIFT) + + +/* V2PSR */ +#define HIT (HIT_MASK << HIT_SHIFT) +#define INDEX (INDEX_MASK << INDEX_SHIFT) + + +/* V2Pxx */ +#define V2Pxx_INDEX (V2Pxx_INDEX_MASK << V2Pxx_INDEX_SHIFT) +#define V2Pxx_VA (V2Pxx_VA_MASK << V2Pxx_VA_SHIFT) + + +/* Global Register Masks */ +/* CBACRn */ +#define RWVMID_MASK 0x1F +#define RWE_MASK 0x01 +#define RWGE_MASK 0x01 +#define CBVMID_MASK 0x1F +#define IRPTNDX_MASK 0xFF + + +/* CR */ +#define RPUE_MASK 0x01 +#define RPUERE_MASK 0x01 +#define RPUEIE_MASK 0x01 +#define DCDEE_MASK 0x01 +#define CLIENTPD_MASK 0x01 +#define STALLD_MASK 0x01 +#define TLBLKCRWE_MASK 0x01 +#define CR_TLBIALLCFG_MASK 0x01 +#define TLBIVMIDCFG_MASK 0x01 +#define CR_HUME_MASK 0x01 + + +/* ESR */ +#define CFG_MASK 0x01 +#define BYPASS_MASK 0x01 +#define ESR_MULTI_MASK 0x01 + + +/* ESYNR0 */ +#define ESYNR0_AMID_MASK 0xFF +#define ESYNR0_APID_MASK 0x1F +#define ESYNR0_ABID_MASK 0x07 +#define ESYNR0_AVMID_MASK 0x1F +#define ESYNR0_ATID_MASK 0xFF + + +/* ESYNR1 */ +#define ESYNR1_AMEMTYPE_MASK 0x07 +#define ESYNR1_ASHARED_MASK 0x01 +#define ESYNR1_AINNERSHARED_MASK 0x01 +#define ESYNR1_APRIV_MASK 0x01 +#define ESYNR1_APROTNS_MASK 0x01 +#define ESYNR1_AINST_MASK 0x01 +#define ESYNR1_AWRITE_MASK 0x01 +#define ESYNR1_ABURST_MASK 0x01 +#define ESYNR1_ALEN_MASK 0x0F +#define ESYNR1_ASIZE_MASK 0x01 +#define ESYNR1_ALOCK_MASK 0x03 +#define ESYNR1_AOOO_MASK 0x01 +#define ESYNR1_AFULL_MASK 0x01 +#define ESYNR1_AC_MASK 0x01 +#define ESYNR1_DCD_MASK 0x01 + + +/* IDR */ +#define NM2VCBMT_MASK 0x1FF +#define HTW_MASK 0x01 +#define HUM_MASK 0x01 +#define TLBSIZE_MASK 0x0F +#define NCB_MASK 0xFF +#define NIRPT_MASK 0xFF + + +/* M2VCBRn */ +#define VMID_MASK 0x1F +#define CBNDX_MASK 0xFF +#define BYPASSD_MASK 0x01 +#define BPRCOSH_MASK 0x01 +#define BPRCISH_MASK 0x01 +#define BPRCNSH_MASK 0x01 +#define BPSHCFG_MASK 0x03 +#define NSCFG_MASK 0x03 +#define BPMTCFG_MASK 0x01 +#define BPMEMTYPE_MASK 0x07 + + +/* REV */ +#define MINOR_MASK 0x0F +#define MAJOR_MASK 0x0F + + +/* TESTBUSCR */ +#define TBE_MASK 0x01 +#define SPDMBE_MASK 0x01 +#define WGSEL_MASK 0x03 +#define TBLSEL_MASK 0x03 +#define TBHSEL_MASK 0x03 +#define SPDM0SEL_MASK 0x0F +#define SPDM1SEL_MASK 0x0F +#define SPDM2SEL_MASK 0x0F +#define SPDM3SEL_MASK 0x0F + + +/* TLBIMID */ +#define TLBIVMID_VMID_MASK 0x1F + + +/* TLBRSW */ +#define TLBRSW_INDEX_MASK 0xFF +#define TLBBFBS_MASK 0x03 + + +/* TLBTR0 */ +#define PR_MASK 0x01 +#define PW_MASK 0x01 +#define UR_MASK 0x01 +#define UW_MASK 0x01 +#define XN_MASK 0x01 +#define NSDESC_MASK 0x01 +#define ISH_MASK 0x01 +#define SH_MASK 0x01 +#define MT_MASK 0x07 +#define DPSIZR_MASK 0x07 +#define DPSIZC_MASK 0x07 + + +/* TLBTR1 */ +#define TLBTR1_VMID_MASK 0x1F +#define TLBTR1_PA_MASK 0x000FFFFF + + +/* TLBTR2 */ +#define TLBTR2_ASID_MASK 0xFF +#define TLBTR2_V_MASK 0x01 +#define TLBTR2_NSTID_MASK 0x01 +#define TLBTR2_NV_MASK 0x01 +#define TLBTR2_VA_MASK 0x000FFFFF + + +/* Global Register Shifts */ +/* CBACRn */ +#define RWVMID_SHIFT 0 +#define RWE_SHIFT 8 +#define RWGE_SHIFT 9 +#define CBVMID_SHIFT 16 +#define IRPTNDX_SHIFT 24 + + +/* CR */ +#define RPUE_SHIFT 0 +#define RPUERE_SHIFT 1 +#define RPUEIE_SHIFT 2 +#define DCDEE_SHIFT 3 +#define CLIENTPD_SHIFT 4 +#define STALLD_SHIFT 5 +#define TLBLKCRWE_SHIFT 6 +#define CR_TLBIALLCFG_SHIFT 7 +#define TLBIVMIDCFG_SHIFT 8 +#define CR_HUME_SHIFT 9 + + +/* ESR */ +#define CFG_SHIFT 0 +#define BYPASS_SHIFT 1 +#define ESR_MULTI_SHIFT 31 + + +/* ESYNR0 */ +#define ESYNR0_AMID_SHIFT 0 +#define ESYNR0_APID_SHIFT 8 +#define ESYNR0_ABID_SHIFT 13 +#define ESYNR0_AVMID_SHIFT 16 +#define ESYNR0_ATID_SHIFT 24 + + +/* ESYNR1 */ +#define ESYNR1_AMEMTYPE_SHIFT 0 +#define ESYNR1_ASHARED_SHIFT 3 +#define ESYNR1_AINNERSHARED_SHIFT 4 +#define ESYNR1_APRIV_SHIFT 5 +#define ESYNR1_APROTNS_SHIFT 6 +#define ESYNR1_AINST_SHIFT 7 +#define ESYNR1_AWRITE_SHIFT 8 +#define ESYNR1_ABURST_SHIFT 10 +#define ESYNR1_ALEN_SHIFT 12 +#define ESYNR1_ASIZE_SHIFT 16 +#define ESYNR1_ALOCK_SHIFT 20 +#define ESYNR1_AOOO_SHIFT 22 +#define ESYNR1_AFULL_SHIFT 24 +#define ESYNR1_AC_SHIFT 30 +#define ESYNR1_DCD_SHIFT 31 + + +/* IDR */ +#define NM2VCBMT_SHIFT 0 +#define HTW_SHIFT 9 +#define HUM_SHIFT 10 +#define TLBSIZE_SHIFT 12 +#define NCB_SHIFT 16 +#define NIRPT_SHIFT 24 + + +/* M2VCBRn */ +#define VMID_SHIFT 0 +#define CBNDX_SHIFT 8 +#define BYPASSD_SHIFT 16 +#define BPRCOSH_SHIFT 17 +#define BPRCISH_SHIFT 18 +#define BPRCNSH_SHIFT 19 +#define BPSHCFG_SHIFT 20 +#define NSCFG_SHIFT 22 +#define BPMTCFG_SHIFT 24 +#define BPMEMTYPE_SHIFT 25 + + +/* REV */ +#define MINOR_SHIFT 0 +#define MAJOR_SHIFT 4 + + +/* TESTBUSCR */ +#define TBE_SHIFT 0 +#define SPDMBE_SHIFT 1 +#define WGSEL_SHIFT 8 +#define TBLSEL_SHIFT 12 +#define TBHSEL_SHIFT 14 +#define SPDM0SEL_SHIFT 16 +#define SPDM1SEL_SHIFT 20 +#define SPDM2SEL_SHIFT 24 +#define SPDM3SEL_SHIFT 28 + + +/* TLBIMID */ +#define TLBIVMID_VMID_SHIFT 0 + + +/* TLBRSW */ +#define TLBRSW_INDEX_SHIFT 0 +#define TLBBFBS_SHIFT 8 + + +/* TLBTR0 */ +#define PR_SHIFT 0 +#define PW_SHIFT 1 +#define UR_SHIFT 2 +#define UW_SHIFT 3 +#define XN_SHIFT 4 +#define NSDESC_SHIFT 6 +#define ISH_SHIFT 7 +#define SH_SHIFT 8 +#define MT_SHIFT 9 +#define DPSIZR_SHIFT 16 +#define DPSIZC_SHIFT 20 + + +/* TLBTR1 */ +#define TLBTR1_VMID_SHIFT 0 +#define TLBTR1_PA_SHIFT 12 + + +/* TLBTR2 */ +#define TLBTR2_ASID_SHIFT 0 +#define TLBTR2_V_SHIFT 8 +#define TLBTR2_NSTID_SHIFT 9 +#define TLBTR2_NV_SHIFT 10 +#define TLBTR2_VA_SHIFT 12 + + +/* Context Register Masks */ +/* ACTLR */ +#define CFERE_MASK 0x01 +#define CFEIE_MASK 0x01 +#define PTSHCFG_MASK 0x03 +#define RCOSH_MASK 0x01 +#define RCISH_MASK 0x01 +#define RCNSH_MASK 0x01 +#define PRIVCFG_MASK 0x03 +#define DNA_MASK 0x01 +#define DNLV2PA_MASK 0x01 +#define TLBMCFG_MASK 0x03 +#define CFCFG_MASK 0x01 +#define TIPCF_MASK 0x01 +#define V2PCFG_MASK 0x03 +#define HUME_MASK 0x01 +#define PTMTCFG_MASK 0x01 +#define PTMEMTYPE_MASK 0x07 + + +/* BFBCR */ +#define BFBDFE_MASK 0x01 +#define BFBSFE_MASK 0x01 +#define SFVS_MASK 0x01 +#define FLVIC_MASK 0x0F +#define SLVIC_MASK 0x0F + + +/* CONTEXTIDR */ +#define CONTEXTIDR_ASID_MASK 0xFF +#define PROCID_MASK 0x00FFFFFF + + +/* FSR */ +#define TF_MASK 0x01 +#define AFF_MASK 0x01 +#define APF_MASK 0x01 +#define TLBMF_MASK 0x01 +#define HTWDEEF_MASK 0x01 +#define HTWSEEF_MASK 0x01 +#define MHF_MASK 0x01 +#define SL_MASK 0x01 +#define SS_MASK 0x01 +#define MULTI_MASK 0x01 + + +/* FSYNR0 */ +#define AMID_MASK 0xFF +#define APID_MASK 0x1F +#define ABID_MASK 0x07 +#define ATID_MASK 0xFF + + +/* FSYNR1 */ +#define AMEMTYPE_MASK 0x07 +#define ASHARED_MASK 0x01 +#define AINNERSHARED_MASK 0x01 +#define APRIV_MASK 0x01 +#define APROTNS_MASK 0x01 +#define AINST_MASK 0x01 +#define AWRITE_MASK 0x01 +#define ABURST_MASK 0x01 +#define ALEN_MASK 0x0F +#define FSYNR1_ASIZE_MASK 0x07 +#define ALOCK_MASK 0x03 +#define AFULL_MASK 0x01 + + +/* NMRR */ +#define ICPC0_MASK 0x03 +#define ICPC1_MASK 0x03 +#define ICPC2_MASK 0x03 +#define ICPC3_MASK 0x03 +#define ICPC4_MASK 0x03 +#define ICPC5_MASK 0x03 +#define ICPC6_MASK 0x03 +#define ICPC7_MASK 0x03 +#define OCPC0_MASK 0x03 +#define OCPC1_MASK 0x03 +#define OCPC2_MASK 0x03 +#define OCPC3_MASK 0x03 +#define OCPC4_MASK 0x03 +#define OCPC5_MASK 0x03 +#define OCPC6_MASK 0x03 +#define OCPC7_MASK 0x03 + + +/* PAR */ +#define FAULT_MASK 0x01 +/* If a fault is present, these are the +same as the fault fields in the FAR */ +#define FAULT_TF_MASK 0x01 +#define FAULT_AFF_MASK 0x01 +#define FAULT_APF_MASK 0x01 +#define FAULT_TLBMF_MASK 0x01 +#define FAULT_HTWDEEF_MASK 0x01 +#define FAULT_HTWSEEF_MASK 0x01 +#define FAULT_MHF_MASK 0x01 +#define FAULT_SL_MASK 0x01 +#define FAULT_SS_MASK 0x01 + +/* If NO fault is present, the following + * fields are in effect + * (FAULT remains as before) */ +#define PAR_NOFAULT_SS_MASK 0x01 +#define PAR_NOFAULT_MT_MASK 0x07 +#define PAR_NOFAULT_SH_MASK 0x01 +#define PAR_NOFAULT_NS_MASK 0x01 +#define PAR_NOFAULT_NOS_MASK 0x01 +#define PAR_NPFAULT_PA_MASK 0x000FFFFF + + +/* PRRR */ +#define MTC0_MASK 0x03 +#define MTC1_MASK 0x03 +#define MTC2_MASK 0x03 +#define MTC3_MASK 0x03 +#define MTC4_MASK 0x03 +#define MTC5_MASK 0x03 +#define MTC6_MASK 0x03 +#define MTC7_MASK 0x03 +#define SHDSH0_MASK 0x01 +#define SHDSH1_MASK 0x01 +#define SHNMSH0_MASK 0x01 +#define SHNMSH1_MASK 0x01 +#define NOS0_MASK 0x01 +#define NOS1_MASK 0x01 +#define NOS2_MASK 0x01 +#define NOS3_MASK 0x01 +#define NOS4_MASK 0x01 +#define NOS5_MASK 0x01 +#define NOS6_MASK 0x01 +#define NOS7_MASK 0x01 + + +/* RESUME */ +#define TNR_MASK 0x01 + + +/* SCTLR */ +#define M_MASK 0x01 +#define TRE_MASK 0x01 +#define AFE_MASK 0x01 +#define HAF_MASK 0x01 +#define BE_MASK 0x01 +#define AFFD_MASK 0x01 + + +/* TLBIASID */ +#define TLBIASID_ASID_MASK 0xFF + + +/* TLBIVA */ +#define TLBIVA_ASID_MASK 0xFF +#define TLBIVA_VA_MASK 0x000FFFFF + + +/* TLBIVAA */ +#define TLBIVAA_VA_MASK 0x000FFFFF + + +/* TLBLCKR */ +#define LKE_MASK 0x01 +#define TLBLCKR_TLBIALLCFG_MASK 0x01 +#define TLBIASIDCFG_MASK 0x01 +#define TLBIVAACFG_MASK 0x01 +#define FLOOR_MASK 0xFF +#define VICTIM_MASK 0xFF + + +/* TTBCR */ +#define N_MASK 0x07 +#define PD0_MASK 0x01 +#define PD1_MASK 0x01 + + +/* TTBR0 */ +#define TTBR0_IRGNH_MASK 0x01 +#define TTBR0_SH_MASK 0x01 +#define TTBR0_ORGN_MASK 0x03 +#define TTBR0_NOS_MASK 0x01 +#define TTBR0_IRGNL_MASK 0x01 +#define TTBR0_PA_MASK 0x0003FFFF + + +/* TTBR1 */ +#define TTBR1_IRGNH_MASK 0x01 +#define TTBR1_SH_MASK 0x01 +#define TTBR1_ORGN_MASK 0x03 +#define TTBR1_NOS_MASK 0x01 +#define TTBR1_IRGNL_MASK 0x01 +#define TTBR1_PA_MASK 0x0003FFFF + + +/* V2PSR */ +#define HIT_MASK 0x01 +#define INDEX_MASK 0xFF + + +/* V2Pxx */ +#define V2Pxx_INDEX_MASK 0xFF +#define V2Pxx_VA_MASK 0x000FFFFF + + +/* Context Register Shifts */ +/* ACTLR */ +#define CFERE_SHIFT 0 +#define CFEIE_SHIFT 1 +#define PTSHCFG_SHIFT 2 +#define RCOSH_SHIFT 4 +#define RCISH_SHIFT 5 +#define RCNSH_SHIFT 6 +#define PRIVCFG_SHIFT 8 +#define DNA_SHIFT 10 +#define DNLV2PA_SHIFT 11 +#define TLBMCFG_SHIFT 12 +#define CFCFG_SHIFT 14 +#define TIPCF_SHIFT 15 +#define V2PCFG_SHIFT 16 +#define HUME_SHIFT 18 +#define PTMTCFG_SHIFT 20 +#define PTMEMTYPE_SHIFT 21 + + +/* BFBCR */ +#define BFBDFE_SHIFT 0 +#define BFBSFE_SHIFT 1 +#define SFVS_SHIFT 2 +#define FLVIC_SHIFT 4 +#define SLVIC_SHIFT 8 + + +/* CONTEXTIDR */ +#define CONTEXTIDR_ASID_SHIFT 0 +#define PROCID_SHIFT 8 + + +/* FSR */ +#define TF_SHIFT 1 +#define AFF_SHIFT 2 +#define APF_SHIFT 3 +#define TLBMF_SHIFT 4 +#define HTWDEEF_SHIFT 5 +#define HTWSEEF_SHIFT 6 +#define MHF_SHIFT 7 +#define SL_SHIFT 16 +#define SS_SHIFT 30 +#define MULTI_SHIFT 31 + + +/* FSYNR0 */ +#define AMID_SHIFT 0 +#define APID_SHIFT 8 +#define ABID_SHIFT 13 +#define ATID_SHIFT 24 + + +/* FSYNR1 */ +#define AMEMTYPE_SHIFT 0 +#define ASHARED_SHIFT 3 +#define AINNERSHARED_SHIFT 4 +#define APRIV_SHIFT 5 +#define APROTNS_SHIFT 6 +#define AINST_SHIFT 7 +#define AWRITE_SHIFT 8 +#define ABURST_SHIFT 10 +#define ALEN_SHIFT 12 +#define FSYNR1_ASIZE_SHIFT 16 +#define ALOCK_SHIFT 20 +#define AFULL_SHIFT 24 + + +/* NMRR */ +#define ICPC0_SHIFT 0 +#define ICPC1_SHIFT 2 +#define ICPC2_SHIFT 4 +#define ICPC3_SHIFT 6 +#define ICPC4_SHIFT 8 +#define ICPC5_SHIFT 10 +#define ICPC6_SHIFT 12 +#define ICPC7_SHIFT 14 +#define OCPC0_SHIFT 16 +#define OCPC1_SHIFT 18 +#define OCPC2_SHIFT 20 +#define OCPC3_SHIFT 22 +#define OCPC4_SHIFT 24 +#define OCPC5_SHIFT 26 +#define OCPC6_SHIFT 28 +#define OCPC7_SHIFT 30 + + +/* PAR */ +#define FAULT_SHIFT 0 +/* If a fault is present, these are the +same as the fault fields in the FAR */ +#define FAULT_TF_SHIFT 1 +#define FAULT_AFF_SHIFT 2 +#define FAULT_APF_SHIFT 3 +#define FAULT_TLBMF_SHIFT 4 +#define FAULT_HTWDEEF_SHIFT 5 +#define FAULT_HTWSEEF_SHIFT 6 +#define FAULT_MHF_SHIFT 7 +#define FAULT_SL_SHIFT 16 +#define FAULT_SS_SHIFT 30 + +/* If NO fault is present, the following + * fields are in effect + * (FAULT remains as before) */ +#define PAR_NOFAULT_SS_SHIFT 1 +#define PAR_NOFAULT_MT_SHIFT 4 +#define PAR_NOFAULT_SH_SHIFT 7 +#define PAR_NOFAULT_NS_SHIFT 9 +#define PAR_NOFAULT_NOS_SHIFT 10 +#define PAR_NPFAULT_PA_SHIFT 12 + + +/* PRRR */ +#define MTC0_SHIFT 0 +#define MTC1_SHIFT 2 +#define MTC2_SHIFT 4 +#define MTC3_SHIFT 6 +#define MTC4_SHIFT 8 +#define MTC5_SHIFT 10 +#define MTC6_SHIFT 12 +#define MTC7_SHIFT 14 +#define SHDSH0_SHIFT 16 +#define SHDSH1_SHIFT 17 +#define SHNMSH0_SHIFT 18 +#define SHNMSH1_SHIFT 19 +#define NOS0_SHIFT 24 +#define NOS1_SHIFT 25 +#define NOS2_SHIFT 26 +#define NOS3_SHIFT 27 +#define NOS4_SHIFT 28 +#define NOS5_SHIFT 29 +#define NOS6_SHIFT 30 +#define NOS7_SHIFT 31 + + +/* RESUME */ +#define TNR_SHIFT 0 + + +/* SCTLR */ +#define M_SHIFT 0 +#define TRE_SHIFT 1 +#define AFE_SHIFT 2 +#define HAF_SHIFT 3 +#define BE_SHIFT 4 +#define AFFD_SHIFT 5 + + +/* TLBIASID */ +#define TLBIASID_ASID_SHIFT 0 + + +/* TLBIVA */ +#define TLBIVA_ASID_SHIFT 0 +#define TLBIVA_VA_SHIFT 12 + + +/* TLBIVAA */ +#define TLBIVAA_VA_SHIFT 12 + + +/* TLBLCKR */ +#define LKE_SHIFT 0 +#define TLBLCKR_TLBIALLCFG_SHIFT 1 +#define TLBIASIDCFG_SHIFT 2 +#define TLBIVAACFG_SHIFT 3 +#define FLOOR_SHIFT 8 +#define VICTIM_SHIFT 8 + + +/* TTBCR */ +#define N_SHIFT 3 +#define PD0_SHIFT 4 +#define PD1_SHIFT 5 + + +/* TTBR0 */ +#define TTBR0_IRGNH_SHIFT 0 +#define TTBR0_SH_SHIFT 1 +#define TTBR0_ORGN_SHIFT 3 +#define TTBR0_NOS_SHIFT 5 +#define TTBR0_IRGNL_SHIFT 6 +#define TTBR0_PA_SHIFT 14 + + +/* TTBR1 */ +#define TTBR1_IRGNH_SHIFT 0 +#define TTBR1_SH_SHIFT 1 +#define TTBR1_ORGN_SHIFT 3 +#define TTBR1_NOS_SHIFT 5 +#define TTBR1_IRGNL_SHIFT 6 +#define TTBR1_PA_SHIFT 14 + + +/* V2PSR */ +#define HIT_SHIFT 0 +#define INDEX_SHIFT 8 + + +/* V2Pxx */ +#define V2Pxx_INDEX_SHIFT 0 +#define V2Pxx_VA_SHIFT 12 + +#endif diff --git a/arch/arm/mach-msm/include/mach/irqs-8x60.h b/arch/arm/mach-msm/include/mach/irqs-8x60.h new file mode 100644 index 000000000000..36074cfc9ad2 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/irqs-8x60.h @@ -0,0 +1,253 @@ +/* Copyright (c) 2010 Code Aurora Forum. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_IRQS_8X60_H +#define __ASM_ARCH_MSM_IRQS_8X60_H + +/* MSM ACPU Interrupt Numbers */ + +/* 0-15: STI/SGI (software triggered/generated interrupts) + * 16-31: PPI (private peripheral interrupts) + * 32+: SPI (shared peripheral interrupts) + */ + +#define GIC_PPI_START 16 +#define GIC_SPI_START 32 + +#define INT_DEBUG_TIMER_EXP (GIC_PPI_START + 0) +#define INT_GP_TIMER_EXP (GIC_PPI_START + 1) +#define INT_GP_TIMER2_EXP (GIC_PPI_START + 2) +#define WDT0_ACCSCSSNBARK_INT (GIC_PPI_START + 3) +#define WDT1_ACCSCSSNBARK_INT (GIC_PPI_START + 4) +#define AVS_SVICINT (GIC_PPI_START + 5) +#define AVS_SVICINTSWDONE (GIC_PPI_START + 6) +#define CPU_DBGCPUXCOMMRXFULL (GIC_PPI_START + 7) +#define CPU_DBGCPUXCOMMTXEMPTY (GIC_PPI_START + 8) +#define CPU_SICCPUXPERFMONIRPTREQ (GIC_PPI_START + 9) +#define SC_AVSCPUXDOWN (GIC_PPI_START + 10) +#define SC_AVSCPUXUP (GIC_PPI_START + 11) +#define SC_SICCPUXACGIRPTREQ (GIC_PPI_START + 12) +/* PPI 13 to 15 are unused */ + + +#define SC_SICMPUIRPTREQ (GIC_SPI_START + 0) +#define SC_SICL2IRPTREQ (GIC_SPI_START + 1) +#define SC_SICL2ACGIRPTREQ (GIC_SPI_START + 2) +#define NC (GIC_SPI_START + 3) +#define TLMM_SCSS_DIR_CONN_IRQ_0 (GIC_SPI_START + 4) +#define TLMM_SCSS_DIR_CONN_IRQ_1 (GIC_SPI_START + 5) +#define TLMM_SCSS_DIR_CONN_IRQ_2 (GIC_SPI_START + 6) +#define TLMM_SCSS_DIR_CONN_IRQ_3 (GIC_SPI_START + 7) +#define TLMM_SCSS_DIR_CONN_IRQ_4 (GIC_SPI_START + 8) +#define TLMM_SCSS_DIR_CONN_IRQ_5 (GIC_SPI_START + 9) +#define TLMM_SCSS_DIR_CONN_IRQ_6 (GIC_SPI_START + 10) +#define TLMM_SCSS_DIR_CONN_IRQ_7 (GIC_SPI_START + 11) +#define TLMM_SCSS_DIR_CONN_IRQ_8 (GIC_SPI_START + 12) +#define TLMM_SCSS_DIR_CONN_IRQ_9 (GIC_SPI_START + 13) +#define PM8058_SEC_IRQ_N (GIC_SPI_START + 14) +#define PM8901_SEC_IRQ_N (GIC_SPI_START + 15) +#define TLMM_SCSS_SUMMARY_IRQ (GIC_SPI_START + 16) +#define SPDM_RT_1_IRQ (GIC_SPI_START + 17) +#define SPDM_DIAG_IRQ (GIC_SPI_START + 18) +#define RPM_SCSS_CPU0_GP_HIGH_IRQ (GIC_SPI_START + 19) +#define RPM_SCSS_CPU0_GP_MEDIUM_IRQ (GIC_SPI_START + 20) +#define RPM_SCSS_CPU0_GP_LOW_IRQ (GIC_SPI_START + 21) +#define RPM_SCSS_CPU0_WAKE_UP_IRQ (GIC_SPI_START + 22) +#define RPM_SCSS_CPU1_GP_HIGH_IRQ (GIC_SPI_START + 23) +#define RPM_SCSS_CPU1_GP_MEDIUM_IRQ (GIC_SPI_START + 24) +#define RPM_SCSS_CPU1_GP_LOW_IRQ (GIC_SPI_START + 25) +#define RPM_SCSS_CPU1_WAKE_UP_IRQ (GIC_SPI_START + 26) +#define SSBI2_2_SC_CPU0_SECURE_INT (GIC_SPI_START + 27) +#define SSBI2_2_SC_CPU0_NON_SECURE_INT (GIC_SPI_START + 28) +#define SSBI2_1_SC_CPU0_SECURE_INT (GIC_SPI_START + 29) +#define SSBI2_1_SC_CPU0_NON_SECURE_INT (GIC_SPI_START + 30) +#define MSMC_SC_SEC_CE_IRQ (GIC_SPI_START + 31) +#define MSMC_SC_PRI_CE_IRQ (GIC_SPI_START + 32) +#define MARM_FIQ (GIC_SPI_START + 33) +#define MARM_IRQ (GIC_SPI_START + 34) +#define MARM_L2CC_IRQ (GIC_SPI_START + 35) +#define MARM_WDOG_EXPIRED (GIC_SPI_START + 36) +#define MARM_SCSS_GP_IRQ_0 (GIC_SPI_START + 37) +#define MARM_SCSS_GP_IRQ_1 (GIC_SPI_START + 38) +#define MARM_SCSS_GP_IRQ_2 (GIC_SPI_START + 39) +#define MARM_SCSS_GP_IRQ_3 (GIC_SPI_START + 40) +#define MARM_SCSS_GP_IRQ_4 (GIC_SPI_START + 41) +#define MARM_SCSS_GP_IRQ_5 (GIC_SPI_START + 42) +#define MARM_SCSS_GP_IRQ_6 (GIC_SPI_START + 43) +#define MARM_SCSS_GP_IRQ_7 (GIC_SPI_START + 44) +#define MARM_SCSS_GP_IRQ_8 (GIC_SPI_START + 45) +#define MARM_SCSS_GP_IRQ_9 (GIC_SPI_START + 46) +#define VPE_IRQ (GIC_SPI_START + 47) +#define VFE_IRQ (GIC_SPI_START + 48) +#define VCODEC_IRQ (GIC_SPI_START + 49) +#define TV_ENC_IRQ (GIC_SPI_START + 50) +#define SMMU_VPE_CB_SC_SECURE_IRQ (GIC_SPI_START + 51) +#define SMMU_VPE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 52) +#define SMMU_VFE_CB_SC_SECURE_IRQ (GIC_SPI_START + 53) +#define SMMU_VFE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 54) +#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ (GIC_SPI_START + 55) +#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 56) +#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ (GIC_SPI_START + 57) +#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 58) +#define SMMU_ROT_CB_SC_SECURE_IRQ (GIC_SPI_START + 59) +#define SMMU_ROT_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 60) +#define SMMU_MDP1_CB_SC_SECURE_IRQ (GIC_SPI_START + 61) +#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 62) +#define SMMU_MDP0_CB_SC_SECURE_IRQ (GIC_SPI_START + 63) +#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 64) +#define SMMU_JPEGD_CB_SC_SECURE_IRQ (GIC_SPI_START + 65) +#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 66) +#define SMMU_IJPEG_CB_SC_SECURE_IRQ (GIC_SPI_START + 67) +#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 68) +#define SMMU_GFX3D_CB_SC_SECURE_IRQ (GIC_SPI_START + 69) +#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 70) +#define SMMU_GFX2D0_CB_SC_SECURE_IRQ (GIC_SPI_START + 71) +#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 72) +#define ROT_IRQ (GIC_SPI_START + 73) +#define MMSS_FABRIC_IRQ (GIC_SPI_START + 74) +#define MDP_IRQ (GIC_SPI_START + 75) +#define JPEGD_IRQ (GIC_SPI_START + 76) +#define JPEG_IRQ (GIC_SPI_START + 77) +#define MMSS_IMEM_IRQ (GIC_SPI_START + 78) +#define HDMI_IRQ (GIC_SPI_START + 79) +#define GFX3D_IRQ (GIC_SPI_START + 80) +#define GFX2D0_IRQ (GIC_SPI_START + 81) +#define DSI_IRQ (GIC_SPI_START + 82) +#define CSI_1_IRQ (GIC_SPI_START + 83) +#define CSI_0_IRQ (GIC_SPI_START + 84) +#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ (GIC_SPI_START + 85) +#define LPASS_SCSS_MIDI_IRQ (GIC_SPI_START + 86) +#define LPASS_Q6SS_WDOG_EXPIRED (GIC_SPI_START + 87) +#define LPASS_SCSS_GP_LOW_IRQ (GIC_SPI_START + 88) +#define LPASS_SCSS_GP_MEDIUM_IRQ (GIC_SPI_START + 89) +#define LPASS_SCSS_GP_HIGH_IRQ (GIC_SPI_START + 90) +#define TOP_IMEM_IRQ (GIC_SPI_START + 91) +#define FABRIC_SYS_IRQ (GIC_SPI_START + 92) +#define FABRIC_APPS_IRQ (GIC_SPI_START + 93) +#define USB1_HS_BAM_IRQ (GIC_SPI_START + 94) +#define SDC4_BAM_IRQ (GIC_SPI_START + 95) +#define SDC3_BAM_IRQ (GIC_SPI_START + 96) +#define SDC2_BAM_IRQ (GIC_SPI_START + 97) +#define SDC1_BAM_IRQ (GIC_SPI_START + 98) +#define FABRIC_SPS_IRQ (GIC_SPI_START + 99) +#define USB1_HS_IRQ (GIC_SPI_START + 100) +#define SDC4_IRQ_0 (GIC_SPI_START + 101) +#define SDC3_IRQ_0 (GIC_SPI_START + 102) +#define SDC2_IRQ_0 (GIC_SPI_START + 103) +#define SDC1_IRQ_0 (GIC_SPI_START + 104) +#define SPS_BAM_DMA_IRQ (GIC_SPI_START + 105) +#define SPS_SEC_VIOL_IRQ (GIC_SPI_START + 106) +#define SPS_MTI_0 (GIC_SPI_START + 107) +#define SPS_MTI_1 (GIC_SPI_START + 108) +#define SPS_MTI_2 (GIC_SPI_START + 109) +#define SPS_MTI_3 (GIC_SPI_START + 110) +#define SPS_MTI_4 (GIC_SPI_START + 111) +#define SPS_MTI_5 (GIC_SPI_START + 112) +#define SPS_MTI_6 (GIC_SPI_START + 113) +#define SPS_MTI_7 (GIC_SPI_START + 114) +#define SPS_MTI_8 (GIC_SPI_START + 115) +#define SPS_MTI_9 (GIC_SPI_START + 116) +#define SPS_MTI_10 (GIC_SPI_START + 117) +#define SPS_MTI_11 (GIC_SPI_START + 118) +#define SPS_MTI_12 (GIC_SPI_START + 119) +#define SPS_MTI_13 (GIC_SPI_START + 120) +#define SPS_MTI_14 (GIC_SPI_START + 121) +#define SPS_MTI_15 (GIC_SPI_START + 122) +#define SPS_MTI_16 (GIC_SPI_START + 123) +#define SPS_MTI_17 (GIC_SPI_START + 124) +#define SPS_MTI_18 (GIC_SPI_START + 125) +#define SPS_MTI_19 (GIC_SPI_START + 126) +#define SPS_MTI_20 (GIC_SPI_START + 127) +#define SPS_MTI_21 (GIC_SPI_START + 128) +#define SPS_MTI_22 (GIC_SPI_START + 129) +#define SPS_MTI_23 (GIC_SPI_START + 130) +#define SPS_MTI_24 (GIC_SPI_START + 131) +#define SPS_MTI_25 (GIC_SPI_START + 132) +#define SPS_MTI_26 (GIC_SPI_START + 133) +#define SPS_MTI_27 (GIC_SPI_START + 134) +#define SPS_MTI_28 (GIC_SPI_START + 135) +#define SPS_MTI_29 (GIC_SPI_START + 136) +#define SPS_MTI_30 (GIC_SPI_START + 137) +#define SPS_MTI_31 (GIC_SPI_START + 138) +#define UXMC_EBI2_WR_ER_DONE_IRQ (GIC_SPI_START + 139) +#define UXMC_EBI2_OP_DONE_IRQ (GIC_SPI_START + 140) +#define USB2_IRQ (GIC_SPI_START + 141) +#define USB1_IRQ (GIC_SPI_START + 142) +#define TSSC_SSBI_IRQ (GIC_SPI_START + 143) +#define TSSC_SAMPLE_IRQ (GIC_SPI_START + 144) +#define TSSC_PENUP_IRQ (GIC_SPI_START + 145) +#define INT_UART1DM_IRQ (GIC_SPI_START + 146) +#define GSBI1_QUP_IRQ (GIC_SPI_START + 147) +#define INT_UART2DM_IRQ (GIC_SPI_START + 148) +#define GSBI2_QUP_IRQ (GIC_SPI_START + 149) +#define INT_UART3DM_IRQ (GIC_SPI_START + 150) +#define GSBI3_QUP_IRQ (GIC_SPI_START + 151) +#define INT_UART4DM_IRQ (GIC_SPI_START + 152) +#define GSBI4_QUP_IRQ (GIC_SPI_START + 153) +#define INT_UART5DM_IRQ (GIC_SPI_START + 154) +#define GSBI5_QUP_IRQ (GIC_SPI_START + 155) +#define INT_UART6DM_IRQ (GIC_SPI_START + 156) +#define GSBI6_QUP_IRQ (GIC_SPI_START + 157) +#define INT_UART7DM_IRQ (GIC_SPI_START + 158) +#define GSBI7_QUP_IRQ (GIC_SPI_START + 159) +#define INT_UART8DM_IRQ (GIC_SPI_START + 160) +#define GSBI8_QUP_IRQ (GIC_SPI_START + 161) +#define TSIF_TSPP_IRQ (GIC_SPI_START + 162) +#define TSIF_BAM_IRQ (GIC_SPI_START + 163) +#define TSIF2_IRQ (GIC_SPI_START + 164) +#define TSIF1_IRQ (GIC_SPI_START + 165) +#define INT_ADM1_MASTER (GIC_SPI_START + 166) +#define INT_ADM1_AARM (GIC_SPI_START + 167) +#define INT_ADM1_SD2 (GIC_SPI_START + 168) +#define INT_ADM1_SD3 (GIC_SPI_START + 169) +#define INT_ADM0_MASTER (GIC_SPI_START + 170) +#define INT_ADM0_AARM (GIC_SPI_START + 171) +#define INT_ADM0_SD2 (GIC_SPI_START + 172) +#define INT_ADM0_SD3 (GIC_SPI_START + 173) +#define CC_SCSS_WDT1CPU1BITEEXPIRED (GIC_SPI_START + 174) +#define CC_SCSS_WDT1CPU0BITEEXPIRED (GIC_SPI_START + 175) +#define CC_SCSS_WDT0CPU1BITEEXPIRED (GIC_SPI_START + 176) +#define CC_SCSS_WDT0CPU0BITEEXPIRED (GIC_SPI_START + 177) +#define TSENS_UPPER_LOWER_INT (GIC_SPI_START + 178) +#define SSBI2_2_SC_CPU1_SECURE_INT (GIC_SPI_START + 179) +#define SSBI2_2_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 180) +#define SSBI2_1_SC_CPU1_SECURE_INT (GIC_SPI_START + 181) +#define SSBI2_1_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 182) +#define XPU_SUMMARY_IRQ (GIC_SPI_START + 183) +#define BUS_EXCEPTION_SUMMARY_IRQ (GIC_SPI_START + 184) +#define HSDDRX_SMICH0_IRQ (GIC_SPI_START + 185) +#define HSDDRX_EBI1_IRQ (GIC_SPI_START + 186) +#define SDC5_BAM_IRQ (GIC_SPI_START + 187) +#define SDC5_IRQ_0 (GIC_SPI_START + 188) +#define INT_UART9DM_IRQ (GIC_SPI_START + 189) +#define GSBI9_QUP_IRQ (GIC_SPI_START + 190) +#define INT_UART10DM_IRQ (GIC_SPI_START + 191) +#define GSBI10_QUP_IRQ (GIC_SPI_START + 192) +#define INT_UART11DM_IRQ (GIC_SPI_START + 193) +#define GSBI11_QUP_IRQ (GIC_SPI_START + 194) +#define INT_UART12DM_IRQ (GIC_SPI_START + 195) +#define GSBI12_QUP_IRQ (GIC_SPI_START + 196) +/*SPI 197 to 216 arent used in 8x60*/ +#define SMPSS_SPARE_1 (GIC_SPI_START + 217) +#define SMPSS_SPARE_2 (GIC_SPI_START + 218) +#define SMPSS_SPARE_3 (GIC_SPI_START + 219) +#define SMPSS_SPARE_4 (GIC_SPI_START + 220) +#define SMPSS_SPARE_5 (GIC_SPI_START + 221) +#define SMPSS_SPARE_6 (GIC_SPI_START + 222) +#define SMPSS_SPARE_7 (GIC_SPI_START + 223) + +#define NR_GPIO_IRQS 173 +#define NR_MSM_IRQS 256 +#define NR_BOARD_IRQS 0 + +#endif diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h index 164d355c96ea..8679a4564744 100644 --- a/arch/arm/mach-msm/include/mach/irqs.h +++ b/arch/arm/mach-msm/include/mach/irqs.h @@ -24,6 +24,8 @@ #elif defined(CONFIG_ARCH_QSD8X50) #include "irqs-8x50.h" #include "sirc.h" +#elif defined(CONFIG_ARCH_MSM8X60) +#include "irqs-8x60.h" #elif defined(CONFIG_ARCH_MSM_ARM11) #include "irqs-7x00.h" #else diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h index 50c7847e6002..070e17d237f1 100644 --- a/arch/arm/mach-msm/include/mach/memory.h +++ b/arch/arm/mach-msm/include/mach/memory.h @@ -23,6 +23,8 @@ #define PHYS_OFFSET UL(0x20000000) #elif defined(CONFIG_ARCH_MSM7X30) #define PHYS_OFFSET UL(0x00200000) +#elif defined(CONFIG_ARCH_MSM8X60) +#define PHYS_OFFSET UL(0x40200000) #else #define PHYS_OFFSET UL(0x10000000) #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h new file mode 100644 index 000000000000..45bab50e3ee6 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * The MSM peripherals are spread all over across 768MB of physical + * space, which makes just having a simple IO_ADDRESS macro to slide + * them into the right virtual location rough. Instead, we will + * provide a master phys->virt mapping for peripherals here. + * + */ + +#ifndef __ASM_ARCH_MSM_IOMAP_8X60_H +#define __ASM_ARCH_MSM_IOMAP_8X60_H + +/* Physical base address and size of peripherals. + * Ordered by the virtual base addresses they will be mapped at. + * + * MSM_VIC_BASE must be an value that can be loaded via a "mov" + * instruction, otherwise entry-macro.S will not compile. + * + * If you add or remove entries here, you'll want to edit the + * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your + * changes. + * + */ + +#define MSM_QGIC_DIST_BASE IOMEM(0xF0000000) +#define MSM_QGIC_DIST_PHYS 0x02080000 +#define MSM_QGIC_DIST_SIZE SZ_4K + +#define MSM_QGIC_CPU_BASE IOMEM(0xF0001000) +#define MSM_QGIC_CPU_PHYS 0x02081000 +#define MSM_QGIC_CPU_SIZE SZ_4K + +#define MSM_ACC_BASE IOMEM(0xF0002000) +#define MSM_ACC_PHYS 0x02001000 +#define MSM_ACC_SIZE SZ_4K + +#define MSM_GCC_BASE IOMEM(0xF0003000) +#define MSM_GCC_PHYS 0x02082000 +#define MSM_GCC_SIZE SZ_4K + +#define MSM_TLMM_BASE IOMEM(0xF0004000) +#define MSM_TLMM_PHYS 0x00800000 +#define MSM_TLMM_SIZE SZ_16K + +#define MSM_SHARED_RAM_BASE IOMEM(0xF0100000) +#define MSM_SHARED_RAM_SIZE SZ_1M + +#define MSM_TMR_BASE IOMEM(0xF0200000) +#define MSM_TMR_PHYS 0x02000000 +#define MSM_TMR_SIZE (SZ_1M) + +#define MSM_GPT_BASE (MSM_TMR_BASE + 0x4) +#define MSM_DGT_BASE (MSM_TMR_BASE + 0x24) + +#define MSM_IOMMU_JPEGD_PHYS 0x07300000 +#define MSM_IOMMU_JPEGD_SIZE SZ_1M + +#define MSM_IOMMU_VPE_PHYS 0x07400000 +#define MSM_IOMMU_VPE_SIZE SZ_1M + +#define MSM_IOMMU_MDP0_PHYS 0x07500000 +#define MSM_IOMMU_MDP0_SIZE SZ_1M + +#define MSM_IOMMU_MDP1_PHYS 0x07600000 +#define MSM_IOMMU_MDP1_SIZE SZ_1M + +#define MSM_IOMMU_ROT_PHYS 0x07700000 +#define MSM_IOMMU_ROT_SIZE SZ_1M + +#define MSM_IOMMU_IJPEG_PHYS 0x07800000 +#define MSM_IOMMU_IJPEG_SIZE SZ_1M + +#define MSM_IOMMU_VFE_PHYS 0x07900000 +#define MSM_IOMMU_VFE_SIZE SZ_1M + +#define MSM_IOMMU_VCODEC_A_PHYS 0x07A00000 +#define MSM_IOMMU_VCODEC_A_SIZE SZ_1M + +#define MSM_IOMMU_VCODEC_B_PHYS 0x07B00000 +#define MSM_IOMMU_VCODEC_B_SIZE SZ_1M + +#define MSM_IOMMU_GFX3D_PHYS 0x07C00000 +#define MSM_IOMMU_GFX3D_SIZE SZ_1M + +#define MSM_IOMMU_GFX2D0_PHYS 0x07D00000 +#define MSM_IOMMU_GFX2D0_SIZE SZ_1M + +#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index e6b1821cc4ea..8e24dd812139 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -47,8 +47,12 @@ #include "msm_iomap-7x30.h" #elif defined(CONFIG_ARCH_QSD8X50) #include "msm_iomap-8x50.h" +#elif defined(CONFIG_ARCH_MSM8X60) +#include "msm_iomap-8x60.h" #else #include "msm_iomap-7x00.h" #endif + + #endif diff --git a/arch/arm/mach-msm/include/mach/smp.h b/arch/arm/mach-msm/include/mach/smp.h new file mode 100644 index 000000000000..3ff7bf5e679e --- /dev/null +++ b/arch/arm/mach-msm/include/mach/smp.h @@ -0,0 +1,39 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Code Aurora nor + * the names of its contributors may be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; + * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef __ASM_ARCH_MSM_SMP_H +#define __ASM_ARCH_MSM_SMP_H + +#include <asm/hardware/gic.h> + +static inline void smp_cross_call(const struct cpumask *mask) +{ + gic_raise_softirq(mask, 1); +} + +#endif diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h index 05f81fd8623c..31a32ad062dc 100644 --- a/arch/arm/mach-msm/include/mach/vmalloc.h +++ b/arch/arm/mach-msm/include/mach/vmalloc.h @@ -16,7 +16,7 @@ #ifndef __ASM_ARCH_MSM_VMALLOC_H #define __ASM_ARCH_MSM_VMALLOC_H -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 #endif diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 1c05060b5f3b..d36b61074146 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -100,6 +100,21 @@ void __init msm_map_qsd8x50_io(void) } #endif /* CONFIG_ARCH_QSD8X50 */ +#ifdef CONFIG_ARCH_MSM8X60 +static struct map_desc msm8x60_io_desc[] __initdata = { + MSM_DEVICE(QGIC_DIST), + MSM_DEVICE(QGIC_CPU), + MSM_DEVICE(TMR), + MSM_DEVICE(ACC), + MSM_DEVICE(GCC), +}; + +void __init msm_map_msm8x60_io(void) +{ + iotable_init(msm8x60_io_desc, ARRAY_SIZE(msm8x60_io_desc)); +} +#endif /* CONFIG_ARCH_MSM8X60 */ + #ifdef CONFIG_ARCH_MSM7X30 static struct map_desc msm7x30_io_desc[] __initdata = { MSM_DEVICE(VIC), diff --git a/arch/arm/mach-msm/iommu.c b/arch/arm/mach-msm/iommu.c new file mode 100644 index 000000000000..f71747db3bee --- /dev/null +++ b/arch/arm/mach-msm/iommu.c @@ -0,0 +1,597 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/iommu.h> + +#include <asm/cacheflush.h> +#include <asm/sizes.h> + +#include <mach/iommu_hw-8xxx.h> +#include <mach/iommu.h> + +DEFINE_SPINLOCK(msm_iommu_lock); + +struct msm_priv { + unsigned long *pgtable; + struct list_head list_attached; +}; + +static void __flush_iotlb(struct iommu_domain *domain) +{ + struct msm_priv *priv = domain->priv; + struct msm_iommu_drvdata *iommu_drvdata; + struct msm_iommu_ctx_drvdata *ctx_drvdata; + +#ifndef CONFIG_IOMMU_PGTABLES_L2 + unsigned long *fl_table = priv->pgtable; + int i; + + dmac_flush_range(fl_table, fl_table + SZ_16K); + + for (i = 0; i < NUM_FL_PTE; i++) + if ((fl_table[i] & 0x03) == FL_TYPE_TABLE) { + void *sl_table = __va(fl_table[i] & FL_BASE_MASK); + dmac_flush_range(sl_table, sl_table + SZ_4K); + } +#endif + + list_for_each_entry(ctx_drvdata, &priv->list_attached, attached_elm) { + if (!ctx_drvdata->pdev || !ctx_drvdata->pdev->dev.parent) + BUG(); + + iommu_drvdata = dev_get_drvdata(ctx_drvdata->pdev->dev.parent); + SET_CTX_TLBIALL(iommu_drvdata->base, ctx_drvdata->num, 0); + } +} + +static void __reset_context(void __iomem *base, int ctx) +{ + SET_BPRCOSH(base, ctx, 0); + SET_BPRCISH(base, ctx, 0); + SET_BPRCNSH(base, ctx, 0); + SET_BPSHCFG(base, ctx, 0); + SET_BPMTCFG(base, ctx, 0); + SET_ACTLR(base, ctx, 0); + SET_SCTLR(base, ctx, 0); + SET_FSRRESTORE(base, ctx, 0); + SET_TTBR0(base, ctx, 0); + SET_TTBR1(base, ctx, 0); + SET_TTBCR(base, ctx, 0); + SET_BFBCR(base, ctx, 0); + SET_PAR(base, ctx, 0); + SET_FAR(base, ctx, 0); + SET_CTX_TLBIALL(base, ctx, 0); + SET_TLBFLPTER(base, ctx, 0); + SET_TLBSLPTER(base, ctx, 0); + SET_TLBLKCR(base, ctx, 0); + SET_PRRR(base, ctx, 0); + SET_NMRR(base, ctx, 0); + SET_CONTEXTIDR(base, ctx, 0); +} + +static void __program_context(void __iomem *base, int ctx, phys_addr_t pgtable) +{ + __reset_context(base, ctx); + + /* Set up HTW mode */ + /* TLB miss configuration: perform HTW on miss */ + SET_TLBMCFG(base, ctx, 0x3); + + /* V2P configuration: HTW for access */ + SET_V2PCFG(base, ctx, 0x3); + + SET_TTBCR(base, ctx, 0); + SET_TTBR0_PA(base, ctx, (pgtable >> 14)); + + /* Invalidate the TLB for this context */ + SET_CTX_TLBIALL(base, ctx, 0); + + /* Set interrupt number to "secure" interrupt */ + SET_IRPTNDX(base, ctx, 0); + + /* Enable context fault interrupt */ + SET_CFEIE(base, ctx, 1); + + /* Stall access on a context fault and let the handler deal with it */ + SET_CFCFG(base, ctx, 1); + + /* Redirect all cacheable requests to L2 slave port. */ + SET_RCISH(base, ctx, 1); + SET_RCOSH(base, ctx, 1); + SET_RCNSH(base, ctx, 1); + + /* Turn on TEX Remap */ + SET_TRE(base, ctx, 1); + + /* Do not configure PRRR / NMRR on the IOMMU for now. We will assume + * TEX class 0 for everything until attributes are properly worked out + */ + SET_PRRR(base, ctx, 0); + SET_NMRR(base, ctx, 0); + + /* Turn on BFB prefetch */ + SET_BFBDFE(base, ctx, 1); + +#ifdef CONFIG_IOMMU_PGTABLES_L2 + /* Configure page tables as inner-cacheable and shareable to reduce + * the TLB miss penalty. + */ + SET_TTBR0_SH(base, ctx, 1); + SET_TTBR1_SH(base, ctx, 1); + + SET_TTBR0_NOS(base, ctx, 1); + SET_TTBR1_NOS(base, ctx, 1); + + SET_TTBR0_IRGNH(base, ctx, 0); /* WB, WA */ + SET_TTBR0_IRGNL(base, ctx, 1); + + SET_TTBR1_IRGNH(base, ctx, 0); /* WB, WA */ + SET_TTBR1_IRGNL(base, ctx, 1); + + SET_TTBR0_ORGN(base, ctx, 1); /* WB, WA */ + SET_TTBR1_ORGN(base, ctx, 1); /* WB, WA */ +#endif + + /* Enable the MMU */ + SET_M(base, ctx, 1); +} + +static int msm_iommu_domain_init(struct iommu_domain *domain) +{ + struct msm_priv *priv = kzalloc(sizeof(*priv), GFP_KERNEL); + + if (!priv) + goto fail_nomem; + + INIT_LIST_HEAD(&priv->list_attached); + priv->pgtable = (unsigned long *)__get_free_pages(GFP_KERNEL, + get_order(SZ_16K)); + + if (!priv->pgtable) + goto fail_nomem; + + memset(priv->pgtable, 0, SZ_16K); + domain->priv = priv; + return 0; + +fail_nomem: + kfree(priv); + return -ENOMEM; +} + +static void msm_iommu_domain_destroy(struct iommu_domain *domain) +{ + struct msm_priv *priv; + unsigned long flags; + unsigned long *fl_table; + int i; + + spin_lock_irqsave(&msm_iommu_lock, flags); + priv = domain->priv; + domain->priv = NULL; + + if (priv) { + fl_table = priv->pgtable; + + for (i = 0; i < NUM_FL_PTE; i++) + if ((fl_table[i] & 0x03) == FL_TYPE_TABLE) + free_page((unsigned long) __va(((fl_table[i]) & + FL_BASE_MASK))); + + free_pages((unsigned long)priv->pgtable, get_order(SZ_16K)); + priv->pgtable = NULL; + } + + kfree(priv); + spin_unlock_irqrestore(&msm_iommu_lock, flags); +} + +static int msm_iommu_attach_dev(struct iommu_domain *domain, struct device *dev) +{ + struct msm_priv *priv; + struct msm_iommu_ctx_dev *ctx_dev; + struct msm_iommu_drvdata *iommu_drvdata; + struct msm_iommu_ctx_drvdata *ctx_drvdata; + struct msm_iommu_ctx_drvdata *tmp_drvdata; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&msm_iommu_lock, flags); + + priv = domain->priv; + + if (!priv || !dev) { + ret = -EINVAL; + goto fail; + } + + iommu_drvdata = dev_get_drvdata(dev->parent); + ctx_drvdata = dev_get_drvdata(dev); + ctx_dev = dev->platform_data; + + if (!iommu_drvdata || !ctx_drvdata || !ctx_dev) { + ret = -EINVAL; + goto fail; + } + + list_for_each_entry(tmp_drvdata, &priv->list_attached, attached_elm) + if (tmp_drvdata == ctx_drvdata) { + ret = -EBUSY; + goto fail; + } + + __program_context(iommu_drvdata->base, ctx_dev->num, + __pa(priv->pgtable)); + + list_add(&(ctx_drvdata->attached_elm), &priv->list_attached); + __flush_iotlb(domain); + +fail: + spin_unlock_irqrestore(&msm_iommu_lock, flags); + return ret; +} + +static void msm_iommu_detach_dev(struct iommu_domain *domain, + struct device *dev) +{ + struct msm_priv *priv; + struct msm_iommu_ctx_dev *ctx_dev; + struct msm_iommu_drvdata *iommu_drvdata; + struct msm_iommu_ctx_drvdata *ctx_drvdata; + unsigned long flags; + + spin_lock_irqsave(&msm_iommu_lock, flags); + priv = domain->priv; + + if (!priv || !dev) + goto fail; + + iommu_drvdata = dev_get_drvdata(dev->parent); + ctx_drvdata = dev_get_drvdata(dev); + ctx_dev = dev->platform_data; + + if (!iommu_drvdata || !ctx_drvdata || !ctx_dev) + goto fail; + + __flush_iotlb(domain); + __reset_context(iommu_drvdata->base, ctx_dev->num); + list_del_init(&ctx_drvdata->attached_elm); + +fail: + spin_unlock_irqrestore(&msm_iommu_lock, flags); +} + +static int msm_iommu_map(struct iommu_domain *domain, unsigned long va, + phys_addr_t pa, int order, int prot) +{ + struct msm_priv *priv; + unsigned long flags; + unsigned long *fl_table; + unsigned long *fl_pte; + unsigned long fl_offset; + unsigned long *sl_table; + unsigned long *sl_pte; + unsigned long sl_offset; + size_t len = 0x1000UL << order; + int ret = 0; + + spin_lock_irqsave(&msm_iommu_lock, flags); + priv = domain->priv; + + if (!priv) { + ret = -EINVAL; + goto fail; + } + + fl_table = priv->pgtable; + + if (len != SZ_16M && len != SZ_1M && + len != SZ_64K && len != SZ_4K) { + pr_debug("Bad size: %d\n", len); + ret = -EINVAL; + goto fail; + } + + if (!fl_table) { + pr_debug("Null page table\n"); + ret = -EINVAL; + goto fail; + } + + fl_offset = FL_OFFSET(va); /* Upper 12 bits */ + fl_pte = fl_table + fl_offset; /* int pointers, 4 bytes */ + + if (len == SZ_16M) { + int i = 0; + for (i = 0; i < 16; i++) + *(fl_pte+i) = (pa & 0xFF000000) | FL_SUPERSECTION | + FL_AP_READ | FL_AP_WRITE | FL_TYPE_SECT | + FL_SHARED; + } + + if (len == SZ_1M) + *fl_pte = (pa & 0xFFF00000) | FL_AP_READ | FL_AP_WRITE | + FL_TYPE_SECT | FL_SHARED; + + /* Need a 2nd level table */ + if ((len == SZ_4K || len == SZ_64K) && (*fl_pte) == 0) { + unsigned long *sl; + sl = (unsigned long *) __get_free_pages(GFP_KERNEL, + get_order(SZ_4K)); + + if (!sl) { + pr_debug("Could not allocate second level table\n"); + ret = -ENOMEM; + goto fail; + } + + memset(sl, 0, SZ_4K); + *fl_pte = ((((int)__pa(sl)) & FL_BASE_MASK) | FL_TYPE_TABLE); + } + + sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK)); + sl_offset = SL_OFFSET(va); + sl_pte = sl_table + sl_offset; + + + if (len == SZ_4K) + *sl_pte = (pa & SL_BASE_MASK_SMALL) | SL_AP0 | SL_AP1 | + SL_SHARED | SL_TYPE_SMALL; + + if (len == SZ_64K) { + int i; + + for (i = 0; i < 16; i++) + *(sl_pte+i) = (pa & SL_BASE_MASK_LARGE) | SL_AP0 | + SL_AP1 | SL_SHARED | SL_TYPE_LARGE; + } + + __flush_iotlb(domain); +fail: + spin_unlock_irqrestore(&msm_iommu_lock, flags); + return ret; +} + +static int msm_iommu_unmap(struct iommu_domain *domain, unsigned long va, + int order) +{ + struct msm_priv *priv; + unsigned long flags; + unsigned long *fl_table; + unsigned long *fl_pte; + unsigned long fl_offset; + unsigned long *sl_table; + unsigned long *sl_pte; + unsigned long sl_offset; + size_t len = 0x1000UL << order; + int i, ret = 0; + + spin_lock_irqsave(&msm_iommu_lock, flags); + + priv = domain->priv; + + if (!priv) { + ret = -ENODEV; + goto fail; + } + + fl_table = priv->pgtable; + + if (len != SZ_16M && len != SZ_1M && + len != SZ_64K && len != SZ_4K) { + pr_debug("Bad length: %d\n", len); + ret = -EINVAL; + goto fail; + } + + if (!fl_table) { + pr_debug("Null page table\n"); + ret = -EINVAL; + goto fail; + } + + fl_offset = FL_OFFSET(va); /* Upper 12 bits */ + fl_pte = fl_table + fl_offset; /* int pointers, 4 bytes */ + + if (*fl_pte == 0) { + pr_debug("First level PTE is 0\n"); + ret = -ENODEV; + goto fail; + } + + /* Unmap supersection */ + if (len == SZ_16M) + for (i = 0; i < 16; i++) + *(fl_pte+i) = 0; + + if (len == SZ_1M) + *fl_pte = 0; + + sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK)); + sl_offset = SL_OFFSET(va); + sl_pte = sl_table + sl_offset; + + if (len == SZ_64K) { + for (i = 0; i < 16; i++) + *(sl_pte+i) = 0; + } + + if (len == SZ_4K) + *sl_pte = 0; + + if (len == SZ_4K || len == SZ_64K) { + int used = 0; + + for (i = 0; i < NUM_SL_PTE; i++) + if (sl_table[i]) + used = 1; + if (!used) { + free_page((unsigned long)sl_table); + *fl_pte = 0; + } + } + + __flush_iotlb(domain); +fail: + spin_unlock_irqrestore(&msm_iommu_lock, flags); + return ret; +} + +static phys_addr_t msm_iommu_iova_to_phys(struct iommu_domain *domain, + unsigned long va) +{ + struct msm_priv *priv; + struct msm_iommu_drvdata *iommu_drvdata; + struct msm_iommu_ctx_drvdata *ctx_drvdata; + unsigned int par; + unsigned long flags; + void __iomem *base; + phys_addr_t ret = 0; + int ctx; + + spin_lock_irqsave(&msm_iommu_lock, flags); + + priv = domain->priv; + if (list_empty(&priv->list_attached)) + goto fail; + + ctx_drvdata = list_entry(priv->list_attached.next, + struct msm_iommu_ctx_drvdata, attached_elm); + iommu_drvdata = dev_get_drvdata(ctx_drvdata->pdev->dev.parent); + + base = iommu_drvdata->base; + ctx = ctx_drvdata->num; + + /* Invalidate context TLB */ + SET_CTX_TLBIALL(base, ctx, 0); + SET_V2PPR_VA(base, ctx, va >> V2Pxx_VA_SHIFT); + + if (GET_FAULT(base, ctx)) + goto fail; + + par = GET_PAR(base, ctx); + + /* We are dealing with a supersection */ + if (GET_NOFAULT_SS(base, ctx)) + ret = (par & 0xFF000000) | (va & 0x00FFFFFF); + else /* Upper 20 bits from PAR, lower 12 from VA */ + ret = (par & 0xFFFFF000) | (va & 0x00000FFF); + +fail: + spin_unlock_irqrestore(&msm_iommu_lock, flags); + return ret; +} + +static int msm_iommu_domain_has_cap(struct iommu_domain *domain, + unsigned long cap) +{ + return 0; +} + +static void print_ctx_regs(void __iomem *base, int ctx) +{ + unsigned int fsr = GET_FSR(base, ctx); + pr_err("FAR = %08x PAR = %08x\n", + GET_FAR(base, ctx), GET_PAR(base, ctx)); + pr_err("FSR = %08x [%s%s%s%s%s%s%s%s%s%s]\n", fsr, + (fsr & 0x02) ? "TF " : "", + (fsr & 0x04) ? "AFF " : "", + (fsr & 0x08) ? "APF " : "", + (fsr & 0x10) ? "TLBMF " : "", + (fsr & 0x20) ? "HTWDEEF " : "", + (fsr & 0x40) ? "HTWSEEF " : "", + (fsr & 0x80) ? "MHF " : "", + (fsr & 0x10000) ? "SL " : "", + (fsr & 0x40000000) ? "SS " : "", + (fsr & 0x80000000) ? "MULTI " : ""); + + pr_err("FSYNR0 = %08x FSYNR1 = %08x\n", + GET_FSYNR0(base, ctx), GET_FSYNR1(base, ctx)); + pr_err("TTBR0 = %08x TTBR1 = %08x\n", + GET_TTBR0(base, ctx), GET_TTBR1(base, ctx)); + pr_err("SCTLR = %08x ACTLR = %08x\n", + GET_SCTLR(base, ctx), GET_ACTLR(base, ctx)); + pr_err("PRRR = %08x NMRR = %08x\n", + GET_PRRR(base, ctx), GET_NMRR(base, ctx)); +} + +irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id) +{ + struct msm_iommu_drvdata *drvdata = dev_id; + void __iomem *base; + unsigned int fsr = 0; + int ncb = 0, i = 0; + + spin_lock(&msm_iommu_lock); + + if (!drvdata) { + pr_err("Invalid device ID in context interrupt handler\n"); + goto fail; + } + + base = drvdata->base; + + pr_err("===== WOAH! =====\n"); + pr_err("Unexpected IOMMU page fault!\n"); + pr_err("base = %08x\n", (unsigned int) base); + + ncb = GET_NCB(base)+1; + for (i = 0; i < ncb; i++) { + fsr = GET_FSR(base, i); + if (fsr) { + pr_err("Fault occurred in context %d.\n", i); + pr_err("Interesting registers:\n"); + print_ctx_regs(base, i); + SET_FSR(base, i, 0x4000000F); + } + } +fail: + spin_unlock(&msm_iommu_lock); + return 0; +} + +static struct iommu_ops msm_iommu_ops = { + .domain_init = msm_iommu_domain_init, + .domain_destroy = msm_iommu_domain_destroy, + .attach_dev = msm_iommu_attach_dev, + .detach_dev = msm_iommu_detach_dev, + .map = msm_iommu_map, + .unmap = msm_iommu_unmap, + .iova_to_phys = msm_iommu_iova_to_phys, + .domain_has_cap = msm_iommu_domain_has_cap +}; + +static int msm_iommu_init(void) +{ + register_iommu(&msm_iommu_ops); + return 0; +} + +subsys_initcall(msm_iommu_init); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>"); diff --git a/arch/arm/mach-msm/iommu_dev.c b/arch/arm/mach-msm/iommu_dev.c new file mode 100644 index 000000000000..c33ae786c41f --- /dev/null +++ b/arch/arm/mach-msm/iommu_dev.c @@ -0,0 +1,374 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/iommu.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/slab.h> + +#include <mach/iommu_hw-8xxx.h> +#include <mach/iommu.h> + +struct iommu_ctx_iter_data { + /* input */ + const char *name; + + /* output */ + struct device *dev; +}; + +static struct platform_device *msm_iommu_root_dev; + +static int each_iommu_ctx(struct device *dev, void *data) +{ + struct iommu_ctx_iter_data *res = data; + struct msm_iommu_ctx_dev *c = dev->platform_data; + + if (!res || !c || !c->name || !res->name) + return -EINVAL; + + if (!strcmp(res->name, c->name)) { + res->dev = dev; + return 1; + } + return 0; +} + +static int each_iommu(struct device *dev, void *data) +{ + return device_for_each_child(dev, data, each_iommu_ctx); +} + +struct device *msm_iommu_get_ctx(const char *ctx_name) +{ + struct iommu_ctx_iter_data r; + int found; + + if (!msm_iommu_root_dev) { + pr_err("No root IOMMU device.\n"); + goto fail; + } + + r.name = ctx_name; + found = device_for_each_child(&msm_iommu_root_dev->dev, &r, each_iommu); + + if (!found) { + pr_err("Could not find context <%s>\n", ctx_name); + goto fail; + } + + return r.dev; +fail: + return NULL; +} +EXPORT_SYMBOL(msm_iommu_get_ctx); + +static void msm_iommu_reset(void __iomem *base) +{ + int ctx, ncb; + + SET_RPUE(base, 0); + SET_RPUEIE(base, 0); + SET_ESRRESTORE(base, 0); + SET_TBE(base, 0); + SET_CR(base, 0); + SET_SPDMBE(base, 0); + SET_TESTBUSCR(base, 0); + SET_TLBRSW(base, 0); + SET_GLOBAL_TLBIALL(base, 0); + SET_RPU_ACR(base, 0); + SET_TLBLKCRWE(base, 1); + ncb = GET_NCB(base)+1; + + for (ctx = 0; ctx < ncb; ctx++) { + SET_BPRCOSH(base, ctx, 0); + SET_BPRCISH(base, ctx, 0); + SET_BPRCNSH(base, ctx, 0); + SET_BPSHCFG(base, ctx, 0); + SET_BPMTCFG(base, ctx, 0); + SET_ACTLR(base, ctx, 0); + SET_SCTLR(base, ctx, 0); + SET_FSRRESTORE(base, ctx, 0); + SET_TTBR0(base, ctx, 0); + SET_TTBR1(base, ctx, 0); + SET_TTBCR(base, ctx, 0); + SET_BFBCR(base, ctx, 0); + SET_PAR(base, ctx, 0); + SET_FAR(base, ctx, 0); + SET_CTX_TLBIALL(base, ctx, 0); + SET_TLBFLPTER(base, ctx, 0); + SET_TLBSLPTER(base, ctx, 0); + SET_TLBLKCR(base, ctx, 0); + SET_PRRR(base, ctx, 0); + SET_NMRR(base, ctx, 0); + SET_CONTEXTIDR(base, ctx, 0); + } +} + +static int msm_iommu_probe(struct platform_device *pdev) +{ + struct resource *r; + struct clk *iommu_clk; + struct msm_iommu_drvdata *drvdata; + struct msm_iommu_dev *iommu_dev = pdev->dev.platform_data; + void __iomem *regs_base; + resource_size_t len; + int ret = 0, ncb, nm2v, irq; + + if (pdev->id != -1) { + drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); + + if (!drvdata) { + ret = -ENOMEM; + goto fail; + } + + if (!iommu_dev) { + ret = -ENODEV; + goto fail; + } + + if (iommu_dev->clk_rate != 0) { + iommu_clk = clk_get(&pdev->dev, "iommu_clk"); + + if (IS_ERR(iommu_clk)) { + ret = -ENODEV; + goto fail; + } + + if (iommu_dev->clk_rate > 0) { + ret = clk_set_rate(iommu_clk, + iommu_dev->clk_rate); + if (ret) { + clk_put(iommu_clk); + goto fail; + } + } + + ret = clk_enable(iommu_clk); + if (ret) { + clk_put(iommu_clk); + goto fail; + } + clk_put(iommu_clk); + } + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "physbase"); + if (!r) { + ret = -ENODEV; + goto fail; + } + + len = r->end - r->start + 1; + + r = request_mem_region(r->start, len, r->name); + if (!r) { + pr_err("Could not request memory region: " + "start=%p, len=%d\n", (void *) r->start, len); + ret = -EBUSY; + goto fail; + } + + regs_base = ioremap(r->start, len); + + if (!regs_base) { + pr_err("Could not ioremap: start=%p, len=%d\n", + (void *) r->start, len); + ret = -EBUSY; + goto fail; + } + + irq = platform_get_irq_byname(pdev, "secure_irq"); + if (irq < 0) { + ret = -ENODEV; + goto fail; + } + + mb(); + + if (GET_IDR(regs_base) == 0) { + pr_err("Invalid IDR value detected\n"); + ret = -ENODEV; + goto fail; + } + + ret = request_irq(irq, msm_iommu_fault_handler, 0, + "msm_iommu_secure_irpt_handler", drvdata); + if (ret) { + pr_err("Request IRQ %d failed with ret=%d\n", irq, ret); + goto fail; + } + + msm_iommu_reset(regs_base); + drvdata->base = regs_base; + drvdata->irq = irq; + + nm2v = GET_NM2VCBMT((unsigned long) regs_base); + ncb = GET_NCB((unsigned long) regs_base); + + pr_info("device %s mapped at %p, irq %d with %d ctx banks\n", + iommu_dev->name, regs_base, irq, ncb+1); + + platform_set_drvdata(pdev, drvdata); + } else + msm_iommu_root_dev = pdev; + + return 0; + +fail: + kfree(drvdata); + return ret; +} + +static int msm_iommu_remove(struct platform_device *pdev) +{ + struct msm_iommu_drvdata *drv = NULL; + + drv = platform_get_drvdata(pdev); + if (drv) { + memset(drv, 0, sizeof(struct msm_iommu_drvdata)); + kfree(drv); + platform_set_drvdata(pdev, NULL); + } + return 0; +} + +static int msm_iommu_ctx_probe(struct platform_device *pdev) +{ + struct msm_iommu_ctx_dev *c = pdev->dev.platform_data; + struct msm_iommu_drvdata *drvdata; + struct msm_iommu_ctx_drvdata *ctx_drvdata = NULL; + int i, ret = 0; + if (!c || !pdev->dev.parent) { + ret = -EINVAL; + goto fail; + } + + drvdata = dev_get_drvdata(pdev->dev.parent); + + if (!drvdata) { + ret = -ENODEV; + goto fail; + } + + ctx_drvdata = kzalloc(sizeof(*ctx_drvdata), GFP_KERNEL); + if (!ctx_drvdata) { + ret = -ENOMEM; + goto fail; + } + ctx_drvdata->num = c->num; + ctx_drvdata->pdev = pdev; + + INIT_LIST_HEAD(&ctx_drvdata->attached_elm); + platform_set_drvdata(pdev, ctx_drvdata); + + /* Program the M2V tables for this context */ + for (i = 0; i < MAX_NUM_MIDS; i++) { + int mid = c->mids[i]; + if (mid == -1) + break; + + SET_M2VCBR_N(drvdata->base, mid, 0); + SET_CBACR_N(drvdata->base, c->num, 0); + + /* Set VMID = MID */ + SET_VMID(drvdata->base, mid, mid); + + /* Set the context number for that MID to this context */ + SET_CBNDX(drvdata->base, mid, c->num); + + /* Set MID associated with this context bank */ + SET_CBVMID(drvdata->base, c->num, mid); + + /* Set security bit override to be Non-secure */ + SET_NSCFG(drvdata->base, mid, 3); + } + + pr_info("context device %s with bank index %d\n", c->name, c->num); + + return 0; +fail: + kfree(ctx_drvdata); + return ret; +} + +static int msm_iommu_ctx_remove(struct platform_device *pdev) +{ + struct msm_iommu_ctx_drvdata *drv = NULL; + drv = platform_get_drvdata(pdev); + if (drv) { + memset(drv, 0, sizeof(struct msm_iommu_ctx_drvdata)); + kfree(drv); + platform_set_drvdata(pdev, NULL); + } + return 0; +} + +static struct platform_driver msm_iommu_driver = { + .driver = { + .name = "msm_iommu", + }, + .probe = msm_iommu_probe, + .remove = msm_iommu_remove, +}; + +static struct platform_driver msm_iommu_ctx_driver = { + .driver = { + .name = "msm_iommu_ctx", + }, + .probe = msm_iommu_ctx_probe, + .remove = msm_iommu_ctx_remove, +}; + +static int msm_iommu_driver_init(void) +{ + int ret; + ret = platform_driver_register(&msm_iommu_driver); + if (ret != 0) { + pr_err("Failed to register IOMMU driver\n"); + goto error; + } + + ret = platform_driver_register(&msm_iommu_ctx_driver); + if (ret != 0) { + pr_err("Failed to register IOMMU context driver\n"); + goto error; + } + +error: + return ret; +} + +static void msm_iommu_driver_exit(void) +{ + platform_driver_unregister(&msm_iommu_ctx_driver); + platform_driver_unregister(&msm_iommu_driver); +} + +subsys_initcall(msm_iommu_driver_init); +module_exit(msm_iommu_driver_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>"); diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index dec5ca622d7d..7689848ec680 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -28,7 +28,6 @@ #ifndef MSM_DGT_BASE #define MSM_DGT_BASE (MSM_GPT_BASE + 0x10) #endif -#define MSM_DGT_SHIFT (5) #define TIMER_MATCH_VAL 0x0000 #define TIMER_COUNT_VAL 0x0004 @@ -36,12 +35,28 @@ #define TIMER_ENABLE_CLR_ON_MATCH_EN 2 #define TIMER_ENABLE_EN 1 #define TIMER_CLEAR 0x000C - +#define DGT_CLK_CTL 0x0034 +enum { + DGT_CLK_CTL_DIV_1 = 0, + DGT_CLK_CTL_DIV_2 = 1, + DGT_CLK_CTL_DIV_3 = 2, + DGT_CLK_CTL_DIV_4 = 3, +}; #define CSR_PROTECTION 0x0020 #define CSR_PROTECTION_EN 1 #define GPT_HZ 32768 + +#if defined(CONFIG_ARCH_QSD8X50) +#define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */ +#define MSM_DGT_SHIFT (0) +#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) +#define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */ +#define MSM_DGT_SHIFT (0) +#else #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */ +#define MSM_DGT_SHIFT (5) +#endif struct msm_clock { struct clock_event_device clockevent; @@ -170,6 +185,10 @@ static void __init msm_timer_init(void) int i; int res; +#ifdef CONFIG_ARCH_MSM8X60 + writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL); +#endif + for (i = 0; i < ARRAY_SIZE(msm_clocks); i++) { struct msm_clock *clock = &msm_clocks[i]; struct clock_event_device *ce = &clock->clockevent; diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c index 61e5e583603b..29e390e89ff4 100644 --- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c +++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c @@ -145,8 +145,6 @@ subsys_initcall(wxl_pci_init); MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */ - .phys_io = MV78XX0_REGS_PHYS_BASE, - .io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = wxl_init, .map_io = mv78xx0_map_io, diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c index efdabe04c69e..207c95e403b9 100644 --- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -93,8 +93,6 @@ subsys_initcall(db78x00_pci_init); MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .phys_io = MV78XX0_REGS_PHYS_BASE, - .io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = db78x00_init, .map_io = mv78xx0_map_io, diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S index cd81689c4621..04891428e48b 100644 --- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S +++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include <mach/mv78xx0.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =MV78XX0_REGS_PHYS_BASE - ldrne \rx, =MV78XX0_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =MV78XX0_REGS_PHYS_BASE + ldr \rv, =MV78XX0_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c index e136b7a03355..3511ad4d973b 100644 --- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c +++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c @@ -78,8 +78,6 @@ subsys_initcall(rd78x00_pci_init); MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .phys_io = MV78XX0_REGS_PHYS_BASE, - .io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = rd78x00_masa_init, .map_io = mv78xx0_map_io, diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig index c71a7bc19284..aa57e35ce3cd 100644 --- a/arch/arm/mach-mx25/Kconfig +++ b/arch/arm/mach-mx25/Kconfig @@ -12,6 +12,8 @@ config MACH_EUKREA_CPUIMX25 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_ESDHC select MXC_ULPI if USB_ULPI choice @@ -20,8 +22,8 @@ choice default MACH_EUKREA_MBIMXSD25_BASEBOARD config MACH_EUKREA_MBIMXSD25_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool + bool "Eukrea MBIMXSD development board" + select IMX_HAVE_PLATFORM_IMX_SSI help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 40c7cc41cee3..9e4a5578c2fb 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -72,7 +72,7 @@ unsigned long get_rate_arm(struct clk *clk) unsigned long rate = get_rate_mpll(); if (cctl & (1 << 14)) - rate = (rate * 3) >> 1; + rate = (rate * 3) >> 2; return rate / ((cctl >> 30) + 1); } @@ -99,7 +99,7 @@ static unsigned long get_rate_per(int per) if (readl(CRM_BASE + 0x64) & (1 << per)) fref = get_rate_upll(); else - fref = get_rate_ipg(NULL); + fref = get_rate_ahb(NULL); return fref / (val + 1); } @@ -139,6 +139,16 @@ static unsigned long get_rate_lcdc(struct clk *clk) return get_rate_per(7); } +static unsigned long get_rate_esdhc1(struct clk *clk) +{ + return get_rate_per(3); +} + +static unsigned long get_rate_esdhc2(struct clk *clk) +{ + return get_rate_per(4); +} + static unsigned long get_rate_csi(struct clk *clk) { return get_rate_per(0); @@ -213,6 +223,12 @@ DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1, NULL, NULL); +DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0, 3, get_rate_esdhc1, NULL, + &esdhc1_ahb_clk); +DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2, NULL, NULL); +DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0, 4, get_rate_esdhc2, NULL, + &esdhc2_ahb_clk); DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL); DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL); DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk); @@ -238,10 +254,14 @@ DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk); DEFINE_CLOCK(wdt_clk, 0, CCM_CGCR2, 19, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(ssi1_clk, 0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk); DEFINE_CLOCK(ssi2_clk, 1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk); +DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGCR1, 13, get_rate_esdhc1, NULL, + &esdhc1_per_clk); +DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGCR1, 14, get_rate_esdhc2, NULL, + &esdhc2_per_clk); DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL); DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk); DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL); -DEFINE_CLOCK(can2_clk, 0, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -261,9 +281,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) - _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) + _REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk) _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk) _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk) @@ -279,6 +299,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h index d86a7c3ca8b0..93afa10b13cf 100644 --- a/arch/arm/mach-mx25/devices-imx25.h +++ b/arch/arm/mach-mx25/devices-imx25.h @@ -9,35 +9,46 @@ #include <mach/mx25.h> #include <mach/devices-common.h> +extern const struct imx_fec_data imx25_fec_data __initconst; +#define imx25_add_fec(pdata) \ + imx_add_fec(&imx25_fec_data, pdata) + #define imx25_add_flexcan0(pdata) \ imx_add_flexcan(0, MX25_CAN1_BASE_ADDR, SZ_16K, MX25_INT_CAN1, pdata) #define imx25_add_flexcan1(pdata) \ imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata) -#define imx25_add_imx_i2c0(pdata) \ - imx_add_imx_i2c(0, MX25_I2C1_BASE_ADDR, SZ_16K, MX25_INT_I2C1, pdata) -#define imx25_add_imx_i2c1(pdata) \ - imx_add_imx_i2c(1, MX25_I2C2_BASE_ADDR, SZ_16K, MX25_INT_I2C2, pdata) -#define imx25_add_imx_i2c2(pdata) \ - imx_add_imx_i2c(2, MX25_I2C3_BASE_ADDR, SZ_16K, MX25_INT_I2C3, pdata) - -#define imx25_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX25_UART1_BASE_ADDR, SZ_16K, MX25_INT_UART1, pdata) -#define imx25_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX25_UART2_BASE_ADDR, SZ_16K, MX25_INT_UART2, pdata) -#define imx25_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX25_UART3_BASE_ADDR, SZ_16K, MX25_INT_UART3, pdata) -#define imx25_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX25_UART4_BASE_ADDR, SZ_16K, MX25_INT_UART4, pdata) -#define imx25_add_imx_uart4(pdata) \ - imx_add_imx_uart_1irq(4, MX25_UART5_BASE_ADDR, SZ_16K, MX25_INT_UART5, pdata) +extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst; +#define imx25_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata) +#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata) +#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata) +#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata) + +extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst; +#define imx25_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata) + +extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst; +#define imx25_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata) +#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata) +#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata) +#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata) +#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata) +#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata) +extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst; #define imx25_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v21(MX25_NFC_BASE_ADDR, MX25_INT_NANDFC, pdata) - -#define imx25_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX25_CSPI1_BASE_ADDR, SZ_16K, MX25_INT_CSPI1, pdata) -#define imx25_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX25_CSPI2_BASE_ADDR, SZ_16K, MX25_INT_CSPI2, pdata) -#define imx25_add_spi_imx2(pdata) \ - imx_add_spi_imx(2, MX25_CSPI3_BASE_ADDR, SZ_16K, MX25_INT_CSPI3, pdata) + imx_add_mxc_nand(&imx25_mxc_nand_data, pdata) + +extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst; +#define imx25_add_spi_imx(id, pdata) \ + imx_add_spi_imx(&imx25_spi_imx_data[id], pdata) +#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) +#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) +#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) + +extern const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst; +#define imx25_add_esdhc(id, pdata) \ + imx_add_esdhc(&imx25_esdhc_data[id], pdata) diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 3468eb15b236..1d0eb3e85941 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -208,26 +208,6 @@ int __init imx25_register_gpios(void) return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); } -static struct resource mx25_fec_resources[] = { - { - .start = MX25_FEC_BASE_ADDR, - .end = MX25_FEC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - { - .start = MX25_INT_FEC, - .end = MX25_INT_FEC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mx25_fec_device = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(mx25_fec_resources), - .resource = mx25_fec_resources, -}; - static struct resource mx25_rtc_resources[] = { { .start = MX25_DRYICE_BASE_ADDR, @@ -305,44 +285,6 @@ struct platform_device mx25_kpp_device = { .resource = mx25_kpp_resources, }; -static struct resource imx_ssi_resources0[] = { - { - .start = MX25_SSI1_BASE_ADDR, - .end = MX25_SSI1_BASE_ADDR + 0x3fff, - .flags = IORESOURCE_MEM, - }, { - .start = MX25_INT_SSI1, - .end = MX25_INT_SSI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource imx_ssi_resources1[] = { - { - .start = MX25_SSI2_BASE_ADDR, - .end = MX25_SSI2_BASE_ADDR + 0x3fff, - .flags = IORESOURCE_MEM - }, { - .start = MX25_INT_SSI2, - .end = MX25_INT_SSI2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_ssi_device0 = { - .name = "imx-ssi", - .id = 0, - .num_resources = ARRAY_SIZE(imx_ssi_resources0), - .resource = imx_ssi_resources0, -}; - -struct platform_device imx_ssi_device1 = { - .name = "imx-ssi", - .id = 1, - .num_resources = ARRAY_SIZE(imx_ssi_resources1), - .resource = imx_ssi_resources1, -}; - static struct resource mx25_csi_resources[] = { { .start = MX25_CSI_BASE_ADDR, diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index 4aceb68e35a7..7b70a43c3a4b 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -6,11 +6,8 @@ extern struct platform_device mxc_pwm_device1; extern struct platform_device mxc_pwm_device2; extern struct platform_device mxc_pwm_device3; extern struct platform_device mxc_keypad_device; -extern struct platform_device mx25_fec_device; extern struct platform_device mx25_rtc_device; extern struct platform_device mx25_fb_device; extern struct platform_device mxc_wdt; extern struct platform_device mx25_kpp_device; -extern struct platform_device imx_ssi_device0; -extern struct platform_device imx_ssi_device1; extern struct platform_device mx25_csi_device; diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c index 4aaadc753d3e..e765ac5d9a08 100644 --- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c @@ -34,7 +34,6 @@ #include <mach/mx25.h> #include <mach/imx-uart.h> #include <mach/imxfb.h> -#include <mach/ssi.h> #include <mach/audmux.h> #include "devices-imx25.h" @@ -90,6 +89,9 @@ static struct pad_desc eukrea_mbimxsd_pads[] = { MX25_PAD_KPP_COL2__AUD5_TXC, MX25_PAD_KPP_COL1__AUD5_RXD, MX25_PAD_KPP_COL0__AUD5_TXD, + /* CAN */ + MX25_PAD_GPIO_D__CAN2_RX, + MX25_PAD_GPIO_C__CAN2_TX, }; #define GPIO_LED1 83 @@ -114,6 +116,38 @@ static struct imx_fb_videomode eukrea_mximxsd_modes[] = { }, .bpp = 16, .pcr = 0xCAD08B80, + }, { + .mode = { + .name = "DVI-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 32000, + .hsync_len = 7, + .left_margin = 100, + .right_margin = 100, + .vsync_len = 7, + .upper_margin = 7, + .lower_margin = 100, + }, + .pcr = 0xFA208B80, + .bpp = 16, + }, { + .mode = { + .name = "DVI-SVGA", + .refresh = 60, + .xres = 800, + .yres = 600, + .pixclock = 25000, + .hsync_len = 7, + .left_margin = 75, + .right_margin = 75, + .vsync_len = 7, + .upper_margin = 7, + .lower_margin = 75, + }, + .pcr = 0xFA208B80, + .bpp = 16, }, }; @@ -205,7 +239,8 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { }, }; -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { +static const +struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, }; @@ -239,7 +274,10 @@ void __init eukrea_mbimxsd25_baseboard_init(void) imx25_add_imx_uart1(&uart_pdata); mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata); - mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata); + imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); + + imx25_add_flexcan1(NULL); + imx25_add_esdhc(0, NULL); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c index e064bb3d6919..f6f9ad60c25e 100644 --- a/arch/arm/mach-mx25/mach-cpuimx25.c +++ b/arch/arm/mach-mx25/mach-cpuimx25.c @@ -23,7 +23,6 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/gpio.h> -#include <linux/fec.h> #include <linux/platform_device.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -41,7 +40,6 @@ #include <mach/mxc_nand.h> #include <mach/imxfb.h> #include <mach/mxc_ehci.h> -#include <mach/ulpi.h> #include <mach/iomux-mx25.h> #include "devices-imx25.h" @@ -67,7 +65,7 @@ static struct pad_desc eukrea_cpuimx25_pads[] = { MX25_PAD_I2C1_DAT__I2C1_DAT, }; -static struct fec_platform_data mx25_fec_pdata = { +static const struct fec_platform_data mx25_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; @@ -129,24 +127,19 @@ static void __init eukrea_cpuimx25_init(void) imx25_add_imx_uart0(&uart_pdata); imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); mxc_register_device(&mx25_rtc_device, NULL); - mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); + imx25_add_fec(&mx25_fec_pdata); i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data); -#if defined(CONFIG_USB_ULPI) - if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - + if (otg_mode_host) mxc_register_device(&mxc_otg, &otg_pdata); - } - mxc_register_device(&mxc_usbh2, &usbh2_pdata); -#endif - if (!otg_mode_host) + else mxc_register_device(&otg_udc_device, &otg_device_pdata); + mxc_register_device(&mxc_usbh2, &usbh2_pdata); + #ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD eukrea_mbimxsd25_baseboard_init(); #endif @@ -163,8 +156,6 @@ static struct sys_timer eukrea_cpuimx25_timer = { MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ - .phys_io = MX25_AIPS1_BASE_ADDR, - .io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX25_PHYS_OFFSET + 0x100, .map_io = mx25_map_io, .init_irq = mx25_init_irq, diff --git a/arch/arm/mach-mx25/mach-mx25_3ds.c b/arch/arm/mach-mx25/mach-mx25_3ds.c index 62bc21f11a71..80805107a73e 100644 --- a/arch/arm/mach-mx25/mach-mx25_3ds.c +++ b/arch/arm/mach-mx25/mach-mx25_3ds.c @@ -28,7 +28,6 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/gpio.h> -#include <linux/fec.h> #include <linux/platform_device.h> #include <linux/input/matrix_keypad.h> @@ -99,7 +98,7 @@ static struct pad_desc mx25pdk_pads[] = { MX25_PAD_KPP_COL3__KPP_COL3, }; -static struct fec_platform_data mx25_fec_pdata = { +static const struct fec_platform_data mx25_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; @@ -192,7 +191,7 @@ static void __init mx25pdk_init(void) mxc_register_device(&mxc_wdt, NULL); mx25pdk_fec_reset(); - mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); + imx25_add_fec(&mx25_fec_pdata); mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data); } @@ -207,8 +206,6 @@ static struct sys_timer mx25pdk_timer = { MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .phys_io = MX25_AIPS1_BASE_ADDR, - .io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX25_PHYS_OFFSET + 0x100, .map_io = mx25_map_io, .init_irq = mx25_init_irq, diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 85beece802aa..096fd33f8ab9 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -9,6 +9,7 @@ config ARCH_MX35 bool select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 + select HAVE_EPIT comment "MX3 platforms:" @@ -16,6 +17,7 @@ config MACH_MX31ADS bool "Support MX31ADS platforms" select ARCH_MX31 select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART default y help @@ -117,9 +119,11 @@ config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" select ARCH_MX35 select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_ESDHC select MXC_ULPI if USB_ULPI help Include support for Phytec pcm043 platform. This includes @@ -140,6 +144,7 @@ config MACH_MX35_3DS bool "Support MX35PDK platform" select ARCH_MX35 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND default n help Include support for MX35PDK platform. This includes specific @@ -159,6 +164,8 @@ config MACH_EUKREA_CPUIMX35 select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_ESDHC select MXC_ULPI if USB_ULPI help Include support for Eukrea CPUIMX35 platform. This includes @@ -170,8 +177,8 @@ choice default MACH_EUKREA_MBIMXSD35_BASEBOARD config MACH_EUKREA_MBIMXSD35_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool + bool "Eukrea MBIMXSD development board" + select IMX_HAVE_PLATFORM_IMX_SSI help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 2bd7beceb991..8a182d0a3fcf 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -7,7 +7,6 @@ obj-y := mm.o devices.o cpu.o CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS -CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o obj-$(CONFIG_ARCH_MX35) += clock-imx35.o obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c index 9a9eb6de6127..109e98f323e0 100644 --- a/arch/arm/mach-mx3/clock-imx31.c +++ b/arch/arm/mach-mx3/clock-imx31.c @@ -477,7 +477,7 @@ DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk); DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk); DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk); DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk); +DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk); DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk); DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk); DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk); @@ -525,9 +525,9 @@ DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "emi", emi_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) - _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) + _REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK(NULL, "pwm", pwm_clk) _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) @@ -564,7 +564,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "rng", rng_clk) - _REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1) + _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1) _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2) _REGISTER_CLOCK(NULL, "mstick", mstick1_clk) _REGISTER_CLOCK(NULL, "mstick", mstick2_clk) diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 7a62e744a8b0..61e4a318980a 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -364,8 +364,8 @@ DEFINE_CLOCK(cspi2_clk, 1, CCM_CGR0, 12, get_rate_ipg, NULL); DEFINE_CLOCK(ect_clk, 0, CCM_CGR0, 14, get_rate_ipg, NULL); DEFINE_CLOCK(edio_clk, 0, CCM_CGR0, 16, NULL, NULL); DEFINE_CLOCK(emi_clk, 0, CCM_CGR0, 18, get_rate_ipg, NULL); -DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg_per, NULL); -DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg_per, NULL); +DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg, NULL); +DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg, NULL); DEFINE_CLOCK(esai_clk, 0, CCM_CGR0, 24, NULL, NULL); DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL); DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL); @@ -451,17 +451,17 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk) _REGISTER_CLOCK(NULL, "ect", ect_clk) _REGISTER_CLOCK(NULL, "edio", edio_clk) _REGISTER_CLOCK(NULL, "emi", emi_clk) - _REGISTER_CLOCK(NULL, "epit", epit1_clk) - _REGISTER_CLOCK(NULL, "epit", epit2_clk) + _REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk) + _REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk) _REGISTER_CLOCK(NULL, "esai", esai_clk) - _REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk) - _REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk) - _REGISTER_CLOCK(NULL, "sdhc", esdhc3_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "gpio", gpio1_clk) _REGISTER_CLOCK(NULL, "gpio", gpio2_clk) @@ -482,7 +482,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "rtc", rtc_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "scc", scc_clk) - _REGISTER_CLOCK(NULL, "sdma", sdma_clk) + _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) _REGISTER_CLOCK(NULL, "spba", spba_clk) _REGISTER_CLOCK(NULL, "spdif", spdif_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) @@ -535,8 +535,16 @@ int __init mx35_clocks_init() __raw_writel(cgr2, CCM_BASE + CCM_CGR2); __raw_writel(cgr3, CCM_BASE + CCM_CGR3); + clk_enable(&iim_clk); + mx35_read_cpu_rev(); + +#ifdef CONFIG_MXC_USE_EPIT + epit_timer_init(&epit1_clk, + MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); +#else mxc_timer_init(&gpt_clk, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); +#endif return 0; } diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c index 861afe0fe3ad..d00a75457812 100644 --- a/arch/arm/mach-mx3/cpu.c +++ b/arch/arm/mach-mx3/cpu.c @@ -25,15 +25,15 @@ struct mx3_cpu_type { }; static struct mx3_cpu_type mx31_cpu_type[] __initdata = { - { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = CHIP_REV_1_0 }, - { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = CHIP_REV_1_1 }, - { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = CHIP_REV_1_1 }, - { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = CHIP_REV_1_1 }, - { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = CHIP_REV_1_1 }, - { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = CHIP_REV_1_2 }, - { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = CHIP_REV_1_2 }, - { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = CHIP_REV_2_0 }, - { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = CHIP_REV_2_0 }, + { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = MX3x_CHIP_REV_1_0 }, + { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 }, + { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 }, + { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 }, + { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 }, + { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 }, + { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 }, + { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 }, + { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 }, }; void __init mx31_read_cpu_rev(void) @@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void) u32 i, srev; /* read SREV register from IIM module */ - srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV)); + srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) if (srev == mx31_cpu_type[i].srev) { @@ -55,3 +55,30 @@ void __init mx31_read_cpu_rev(void) printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev); } + +unsigned int mx35_cpu_rev; +EXPORT_SYMBOL(mx35_cpu_rev); + +void __init mx35_read_cpu_rev(void) +{ + u32 rev; + char *srev = "unknown"; + + rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); + switch (rev) { + case 0x00: + mx35_cpu_rev = MX3x_CHIP_REV_1_0; + srev = "1.0"; + break; + case 0x10: + mx35_cpu_rev = MX3x_CHIP_REV_2_0; + srev = "2.0"; + break; + case 0x11: + mx35_cpu_rev = MX3x_CHIP_REV_2_1; + srev = "2.1"; + break; + } + + printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev); +} diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h index 3b1a44a20585..de9598590eba 100644 --- a/arch/arm/mach-mx3/devices-imx31.h +++ b/arch/arm/mach-mx3/devices-imx31.h @@ -9,30 +9,33 @@ #include <mach/mx31.h> #include <mach/devices-common.h> -#define imx31_add_imx_i2c0(pdata) \ - imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata) -#define imx31_add_imx_i2c1(pdata) \ - imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata) -#define imx31_add_imx_i2c2(pdata) \ - imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata) +extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst; +#define imx31_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata) +#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata) +#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata) +#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata) -#define imx31_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata) -#define imx31_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata) -#define imx31_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata) -#define imx31_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata) -#define imx31_add_imx_uart4(pdata) \ - imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata) +extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst; +#define imx31_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata) +extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst; +#define imx31_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata) +#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata) +#define imx31_add_imx_uart1(pdata) imx31_add_imx_uart(1, pdata) +#define imx31_add_imx_uart2(pdata) imx31_add_imx_uart(2, pdata) +#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata) +#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) + +extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst; #define imx31_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) -#define imx31_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata) -#define imx31_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata) -#define imx31_add_spi_imx2(pdata) \ - imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata) +extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst; +#define imx31_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx31_cspi_data[id], pdata) +#define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata) +#define imx31_add_spi_imx1(pdata) imx31_add_cspi(1, pdata) +#define imx31_add_spi_imx2(pdata) imx31_add_cspi(2, pdata) diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h index f6a431a4c3d2..5eb917b638d0 100644 --- a/arch/arm/mach-mx3/devices-imx35.h +++ b/arch/arm/mach-mx3/devices-imx35.h @@ -9,29 +9,43 @@ #include <mach/mx35.h> #include <mach/devices-common.h> +extern const struct imx_fec_data imx35_fec_data __initconst; +#define imx35_add_fec(pdata) \ + imx_add_fec(&imx35_fec_data, pdata) + #define imx35_add_flexcan0(pdata) \ imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata) #define imx35_add_flexcan1(pdata) \ imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata) -#define imx35_add_imx_i2c0(pdata) \ - imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata) -#define imx35_add_imx_i2c1(pdata) \ - imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata) -#define imx35_add_imx_i2c2(pdata) \ - imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata) +extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst; +#define imx35_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata) +#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata) +#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata) +#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata) + +extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst; +#define imx35_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata) -#define imx35_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata) -#define imx35_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata) -#define imx35_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata) +extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst; +#define imx35_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata) +#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata) +#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata) +#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) +extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst; #define imx35_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) + +extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst; +#define imx35_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx35_cspi_data[id], pdata) +#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata) +#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata) -#define imx35_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata) -#define imx35_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata) +extern const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst; +#define imx35_add_esdhc(id, pdata) \ + imx_add_esdhc(&imx35_esdhc_data[id], pdata) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index a4fd1a26fc91..f4dff11aaee7 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -281,65 +281,6 @@ struct platform_device mxc_usbh2 = { .num_resources = ARRAY_SIZE(mxc_usbh2_resources), }; -#if defined(CONFIG_ARCH_MX35) -static struct resource mxc_fec_resources[] = { - { - .start = MXC_FEC_BASE_ADDR, - .end = MXC_FEC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_FEC, - .end = MXC_INT_FEC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_fec_device = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_fec_resources), - .resource = mxc_fec_resources, -}; -#endif - -static struct resource imx_ssi_resources0[] = { - { - .start = SSI1_BASE_ADDR, - .end = SSI1_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_SSI1, - .end = MX31_INT_SSI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource imx_ssi_resources1[] = { - { - .start = SSI2_BASE_ADDR, - .end = SSI2_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM - }, { - .start = MX31_INT_SSI2, - .end = MX31_INT_SSI2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_ssi_device0 = { - .name = "imx-ssi", - .id = 0, - .num_resources = ARRAY_SIZE(imx_ssi_resources0), - .resource = imx_ssi_resources0, -}; - -struct platform_device imx_ssi_device1 = { - .name = "imx-ssi", - .id = 1, - .num_resources = ARRAY_SIZE(imx_ssi_resources1), - .resource = imx_ssi_resources1, -}; - static struct resource imx_wdt_resources[] = { { .flags = IORESOURCE_MEM, @@ -410,10 +351,6 @@ static int __init mx3_devices_init(void) mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff; mxc_usbh1_resources[1].start = MXC_INT_USBHS; mxc_usbh1_resources[1].end = MXC_INT_USBHS; - imx_ssi_resources0[1].start = MX35_INT_SSI1; - imx_ssi_resources0[1].end = MX35_INT_SSI1; - imx_ssi_resources1[1].start = MX35_INT_SSI2; - imx_ssi_resources1[1].end = MX35_INT_SSI2; imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; } diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index e5535234839f..585f814473d5 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -2,7 +2,6 @@ extern struct platform_device mxc_w1_master_device; extern struct platform_device mx3_ipu; extern struct platform_device mx3_fb; extern struct platform_device mx3_camera; -extern struct platform_device mxc_fec_device; extern struct platform_device mxcsdhc_device0; extern struct platform_device mxcsdhc_device1; extern struct platform_device mxc_otg_udc_device; @@ -10,9 +9,6 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_rnga_device; -extern struct platform_device imx_ssi_device0; -extern struct platform_device imx_ssi_device1; -extern struct platform_device imx_ssi_device1; extern struct platform_device imx_wdt_device0; extern struct platform_device imx_rtc_device0; extern struct platform_device imx_kpp_device; diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c index f8f15e3ac7a0..1abc10d52922 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -43,14 +43,13 @@ #include <mach/ipu.h> #include <mach/mx3fb.h> #include <mach/audmux.h> -#include <mach/ssi.h> #include "devices-imx35.h" #include "devices.h" static const struct fb_videomode fb_modedb[] = { { - .name = "CMO_QVGA", + .name = "CMO-QVGA", .refresh = 60, .xres = 320, .yres = 240, @@ -65,6 +64,40 @@ static const struct fb_videomode fb_modedb[] = { .vmode = FB_VMODE_NONINTERLACED, .flag = 0, }, + { + .name = "DVI-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 32000, + .left_margin = 100, + .right_margin = 100, + .upper_margin = 7, + .lower_margin = 100, + .hsync_len = 7, + .vsync_len = 7, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT | + FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, + { + .name = "DVI-SVGA", + .refresh = 60, + .xres = 800, + .yres = 600, + .pixclock = 25000, + .left_margin = 75, + .right_margin = 75, + .upper_margin = 7, + .lower_margin = 75, + .hsync_len = 7, + .vsync_len = 7, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT | + FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, }; static struct ipu_platform_data mx3_ipu_data = { @@ -73,7 +106,7 @@ static struct ipu_platform_data mx3_ipu_data = { static struct mx3fb_platform_data mx3fb_pdata = { .dma_dev = &mx3_ipu.dev, - .name = "CMO_QVGA", + .name = "CMO-QVGA", .mode = fb_modedb, .num_modes = ARRAY_SIZE(fb_modedb), }; @@ -120,6 +153,16 @@ static struct pad_desc eukrea_mbimxsd_pads[] = { MX35_PAD_STXD4__AUDMUX_AUD4_TXD, MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, MX35_PAD_SCK4__AUDMUX_AUD4_TXC, + /* CAN2 */ + MX35_PAD_TX5_RX0__CAN2_TXCAN, + MX35_PAD_TX4_RX1__CAN2_RXCAN, + /* SDCARD */ + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, }; #define GPIO_LED1 (2 * 32 + 29) @@ -206,7 +249,8 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { }, }; -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { +static const +struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, }; @@ -242,7 +286,10 @@ void __init eukrea_mbimxsd35_baseboard_init(void) mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); - mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata); + imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); + + imx35_add_flexcan1(NULL); + imx35_add_esdhc(0, NULL); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); @@ -254,7 +301,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void) gpio_request(GPIO_LCDPWR, "LCDPWR"); gpio_direction_output(GPIO_LCDPWR, 1); - gpio_free(GPIO_SWITCH1); + gpio_free(GPIO_LCDPWR); i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 68879c996a55..aaa30fe18f85 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -571,8 +571,6 @@ static struct sys_timer armadillo5x0_timer = { MACHINE_START(ARMADILLO5X0, "Armadillo-500") /* Maintainer: Alberto Panizzo */ - .phys_io = MX31_AIPS1_BASE_ADDR, - .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 2a4f8b781ba4..8533bf04284a 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -31,6 +31,7 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <linux/fsl_devices.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -43,7 +44,6 @@ #include <mach/iomux-mx35.h> #include <mach/mxc_nand.h> #include <mach/mxc_ehci.h> -#include <mach/ulpi.h> #include "devices-imx35.h" #include "devices.h" @@ -53,39 +53,16 @@ static const struct imxuart_platform_data uart_pdata __initconst = { }; static const struct imxi2c_platform_data -eukrea_cpuimx35_i2c0_data __initconst = { - .bitrate = 50000, + eukrea_cpuimx35_i2c0_data __initconst = { + .bitrate = 100000, }; -#define TSC2007_IRQGPIO (2 * 32 + 2) -static int ts_get_pendown_state(void) -{ - int val = 0; - gpio_free(TSC2007_IRQGPIO); - gpio_request(TSC2007_IRQGPIO, NULL); - gpio_direction_input(TSC2007_IRQGPIO); - - val = gpio_get_value(TSC2007_IRQGPIO); - - gpio_free(TSC2007_IRQGPIO); - gpio_request(TSC2007_IRQGPIO, NULL); - - return val ? 0 : 1; -} - -static int ts_init(void) -{ - gpio_request(TSC2007_IRQGPIO, NULL); - return 0; -} - static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, - .get_pendown_state = ts_get_pendown_state, - .init_platform_hw = ts_init, }; +#define TSC2007_IRQGPIO (2 * 32 + 2) static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { { I2C_BOARD_INFO("pcf8563", 0x51), @@ -98,7 +75,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { }; static struct platform_device *devices[] __initdata = { - &mxc_fec_device, &imx_wdt_device0, }; @@ -135,18 +111,18 @@ static struct pad_desc eukrea_cpuimx35_pads[] = { }; static const struct mxc_nand_platform_data -eukrea_cpuimx35_nand_board_info __initconst = { + eukrea_cpuimx35_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, .flash_bbt = 1, }; -static struct mxc_usbh_platform_data otg_pdata = { +static struct mxc_usbh_platform_data __maybe_unused otg_pdata = { .portsc = MXC_EHCI_MODE_UTMI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data usbh1_pdata = { +static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN, @@ -180,6 +156,7 @@ static void __init mxc_board_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, ARRAY_SIZE(eukrea_cpuimx35_pads)); + imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx_uart0(&uart_pdata); @@ -189,18 +166,13 @@ static void __init mxc_board_init(void) ARRAY_SIZE(eukrea_cpuimx35_i2c_devices)); imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data); -#if defined(CONFIG_USB_ULPI) - if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - + if (otg_mode_host) mxc_register_device(&mxc_otg_host, &otg_pdata); - } - mxc_register_device(&mxc_usbh1, &usbh1_pdata); -#endif - if (!otg_mode_host) + else mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + mxc_register_device(&mxc_usbh1, &usbh1_pdata); + #ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD eukrea_mbimxsd35_baseboard_init(); #endif @@ -217,8 +189,6 @@ struct sys_timer eukrea_cpuimx35_timer = { MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ - .phys_io = MX35_AIPS1_BASE_ADDR, - .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, .init_irq = mx35_init_irq, diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c index 5b23e416d6c7..042cd5655e17 100644 --- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c +++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c @@ -274,8 +274,6 @@ static struct sys_timer kzm_timer = { * initialize __mach_desc_KZM_ARM11_01 data structure. */ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") - .phys_io = MX31_AIPS1_BASE_ADDR, - .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = kzm_map_io, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 6fe69e124d30..5c1d0e86c91e 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -301,8 +301,6 @@ static struct sys_timer mx31_3ds_timer = { */ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .phys_io = MX31_AIPS1_BASE_ADDR, - .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_3ds_map_io, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 94b3e7c42404..b993b9bf6179 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -22,13 +22,13 @@ #include <linux/i2c.h> #include <linux/irq.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> +#include <mach/board-mx31ads.h> #include <mach/iomux-mx3.h> #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 @@ -40,10 +40,6 @@ #include "devices-imx31.h" #include "devices.h" -/* Base address of PBC controller */ -#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT -/* Offsets for the PBC Controller register */ - /* PBC Board interrupt status register */ #define PBC_INTSTATUS 0x000016 @@ -67,7 +63,6 @@ #define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) #define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) #define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) #define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) @@ -517,7 +512,7 @@ static unsigned int ssi_pins[] = { static void mxc_init_audio(void) { - mxc_register_device(&imx_ssi_device0, NULL); + imx31_add_imx_ssi(0, NULL); mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); } @@ -574,8 +569,6 @@ static struct sys_timer mx31ads_timer = { */ MACHINE_START(MX31ADS, "Freescale MX31ADS") /* Maintainer: Freescale Semiconductor, Inc. */ - .phys_io = MX31_AIPS1_BASE_ADDR, - .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31ads_map_io, .init_irq = mx31ads_init_irq, diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index 7c37daabb757..42f47faa6fd6 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -348,8 +348,6 @@ static struct sys_timer mx31lilly_timer = { }; MACHINE_START(LILLY1131, "INCO startec LILLY-1131") - .phys_io = MX31_AIPS1_BASE_ADDR, - .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index f66a9576d8c2..b93895814cdf 100644 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -282,8 +282,6 @@ struct sys_timer mx31lite_timer = { MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") /* Maintainer: Freescale Semiconductor, Inc. */ - .phys_io = MX31_AIPS1_BASE_ADDR, - .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31lite_map_io, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index 7a075e8bf2d4..eb5f426df224 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -560,8 +560,6 @@ struct sys_timer mx31moboard_timer = { MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") /* Maintainer: Valentin Longchamp, EPFL Mobots group */ - .phys_io = MX31_AIPS1_BASE_ADDR, - .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index 1c30d7212f17..05f628d90725 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -1,5 +1,6 @@ /* * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix * * Author: Fabio Estevam <fabio.estevam@freescale.com> * @@ -27,6 +28,8 @@ #include <linux/gpio.h> #include <linux/fsl_devices.h> +#include <linux/mtd/physmap.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -35,6 +38,7 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> +#include <mach/mxc_ehci.h> #include "devices-imx35.h" #include "devices.h" @@ -43,8 +47,34 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static struct physmap_flash_data mx35pdk_flash_data = { + .width = 2, +}; + +static struct resource mx35pdk_flash_resource = { + .start = MX35_CS0_BASE_ADDR, + .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mx35pdk_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx35pdk_flash_data, + }, + .resource = &mx35pdk_flash_resource, + .num_resources = 1, +}; + +static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + static struct platform_device *devices[] __initdata = { - &mxc_fec_device, + &mx35pdk_flash, }; static struct pad_desc mx35pdk_pads[] = { @@ -75,14 +105,24 @@ static struct pad_desc mx35pdk_pads[] = { /* USBOTG */ MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, + /* USBH1 */ + MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, + MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, }; /* OTG config */ -static struct fsl_usb2_platform_data usb_pdata = { +static struct fsl_usb2_platform_data usb_otg_pdata = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI_WIDE, }; +/* USB HOST config */ +static struct mxc_usbh_platform_data usb_host_pdata = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY, +}; + /* * Board specific initialization. */ @@ -90,11 +130,16 @@ static void __init mxc_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); + imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx_uart0(&uart_pdata); - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata); + + mxc_register_device(&mxc_usbh1, &usb_host_pdata); + + imx35_add_mxc_nand(&mx35pdk_nand_board_info); } static void __init mx35pdk_timer_init(void) @@ -108,8 +153,6 @@ struct sys_timer mx35pdk_timer = { MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ - .phys_io = MX35_AIPS1_BASE_ADDR, - .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, .init_irq = mx35_init_irq, diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 214de11b20b9..86e86c1300d5 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -680,8 +680,6 @@ struct sys_timer pcm037_timer = { MACHINE_START(PCM037, "Phytec Phycore pcm037") /* Maintainer: Pengutronix */ - .phys_io = MX31_AIPS1_BASE_ADDR, - .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c index c8b98218efee..99e0894e07db 100644 --- a/arch/arm/mach-mx3/mach-pcm037_eet.c +++ b/arch/arm/mach-mx3/mach-pcm037_eet.c @@ -19,6 +19,7 @@ #include "pcm037.h" #include "devices.h" +#include "devices-imx31.h" static unsigned int pcm037_eet_pins[] = { /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ @@ -181,7 +182,7 @@ static int eet_init_devices(void) /* SPI */ spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) - imx35_add_spi_imx0(&pcm037_spi1_pdata); + imx31_add_spi_imx0(&pcm037_spi1_pdata); #endif platform_device_register(&pcm037_gpio_keys_device); diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index 28886f0e62f9..4e1de87995d4 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -42,7 +42,6 @@ #include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include <mach/audmux.h> -#include <mach/ssi.h> #include "devices-imx35.h" #include "devices.h" @@ -141,7 +140,6 @@ static struct i2c_board_info pcm043_i2c_devices[] = { static struct platform_device *devices[] __initdata = { &pcm043_flash, - &mxc_fec_device, &imx_wdt_device0, }; @@ -217,6 +215,13 @@ static struct pad_desc pcm043_pads[] = { /* CAN2 */ MX35_PAD_TX5_RX0__CAN2_TXCAN, MX35_PAD_TX4_RX1__CAN2_RXCAN, + /* esdhc */ + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, }; #define AC97_GPIO_TXFS (1 * 32 + 31) @@ -293,7 +298,7 @@ err1: mdelay(1); } -static struct imx_ssi_platform_data pcm043_ssi_pdata = { +static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = { .ac97_reset = pcm043_ac97_cold_reset, .ac97_warm_reset = pcm043_ac97_warm_reset, .flags = IMX_SSI_USE_AC97, @@ -357,11 +362,12 @@ static void __init mxc_board_init(void) MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */ MXC_AUDMUX_V2_PDCR_RXDSEL(3)); + imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&pcm037_nand_board_info); - mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata); + imx35_add_imx_ssi(0, &pcm043_ssi_pdata); imx35_add_imx_uart1(&uart_pdata); @@ -389,6 +395,7 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); imx35_add_flexcan1(NULL); + imx35_add_esdhc(0, NULL); } static void __init pcm043_timer_init(void) @@ -402,8 +409,6 @@ struct sys_timer pcm043_timer = { MACHINE_START(PCM043, "Phytec Phycore pcm043") /* Maintainer: Pengutronix */ - .phys_io = MX35_AIPS1_BASE_ADDR, - .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, .init_irq = mx35_init_irq, diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c index c8c380eef74c..fd1050c40964 100644 --- a/arch/arm/mach-mx3/mach-qong.c +++ b/arch/arm/mach-mx3/mach-qong.c @@ -270,8 +270,6 @@ static struct sys_timer qong_timer = { MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") /* Maintainer: DENX Software Engineering GmbH */ - .phys_io = MX31_AIPS1_BASE_ADDR, - .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 20e48c0195c4..b4ffc531a82c 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -110,6 +110,24 @@ void __init mx35_init_irq(void) static int mxc_init_l2x0(void) { void __iomem *l2x0_base; + void __iomem *clkctl_base; +/* + * First of all, we must repair broken chip settings. There are some + * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These + * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. + * Workaraound is to setup the correct register setting prior enabling the + * L2 cache. This should not hurt already working CPUs, as they are using the + * same value + */ +#define L2_MEM_VAL 0x10 + + clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); + if (clkctl_base != NULL) { + writel(0x00000515, clkctl_base + L2_MEM_VAL); + iounmap(clkctl_base); + } else { + pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); + } l2x0_base = ioremap(L2CC_BASE_ADDR, 4096); if (IS_ERR(l2x0_base)) { diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 0848db5dd364..a2df9ac37996 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -5,11 +5,14 @@ config ARCH_MX51 default y select MXC_TZIC select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 comment "MX5 platforms:" config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its @@ -17,6 +20,8 @@ config MACH_MX51_BABBAGE config MACH_MX51_3DS bool "Support MX51PDK (3DS)" + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD help Include support for MX51PDK (3DS) platform. This includes specific @@ -24,6 +29,10 @@ config MACH_MX51_3DS config MACH_EUKREA_CPUIMX51 bool "Support Eukrea CPUIMX51 module" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX help Include support for Eukrea CPUIMX51 platform. This includes specific configurations for the module and its peripherals. @@ -36,10 +45,43 @@ choice config MACH_EUKREA_MBIMX51_BASEBOARD prompt "Eukrea MBIMX51 development board" bool + select IMX_HAVE_PLATFORM_ESDHC help This adds board specific devices that can be found on Eukrea's MBIMX51 evaluation board. endchoice +config MACH_EUKREA_CPUIMX51SD + bool "Support Eukrea CPUIMX51SD module" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_SPI_IMX + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + help + Include support for Eukrea CPUIMX51SD platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51SD + default MACH_EUKREA_MBIMXSD51_BASEBOARD + +config MACH_EUKREA_MBIMXSD51_BASEBOARD + prompt "Eukrea MBIMXSD development board" + bool + select IMX_HAVE_PLATFORM_ESDHC + help + This adds board specific devices that can be found on Eukrea's + MBIMXSD evaluation board. + +endchoice + +config MACH_MX51_EFIKAMX + bool "Support MX51 Genesi Efika MX nettop" + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for Genesi Efika MX nettop. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 86c66e7f52f3..1769c161a60d 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -9,3 +9,6 @@ obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o +obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o +obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 623607a20f57..6a9792fd0a76 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -28,9 +28,7 @@ #include <mach/eukrea-baseboards.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx51.h> -#include <mach/i2c.h> #include <mach/mxc_ehci.h> #include <asm/irq.h> @@ -39,6 +37,7 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "devices-imx51.h" #include "devices.h" #define CPUIMX51_USBH1_STP (0*32 + 27) @@ -109,7 +108,6 @@ static struct platform_device serial_device = { #endif static struct platform_device *devices[] __initdata = { - &mxc_fec_device, #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) &serial_device, #endif @@ -148,11 +146,19 @@ static struct pad_desc eukrea_cpuimx51_pads[] = { MX51_PAD_USBH1_STP__USBH1_STP, }; -static struct imxuart_platform_data uart_pdata = { +static const struct mxc_nand_platform_data + eukrea_cpuimx51_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct imxi2c_platform_data eukrea_cpuimx51_i2c_data = { +static const +struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = { .bitrate = 100000, }; @@ -239,7 +245,9 @@ static void __init eukrea_cpuimx51_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, ARRAY_SIZE(eukrea_cpuimx51_pads)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info); + gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq"); gpio_direction_input(CPUIMX51_QUARTA_GPIO); gpio_free(CPUIMX51_QUARTA_GPIO); @@ -253,9 +261,10 @@ static void __init eukrea_cpuimx51_init(void) gpio_direction_input(CPUIMX51_QUARTD_GPIO); gpio_free(CPUIMX51_QUARTD_GPIO); + imx51_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_i2c_device1, &eukrea_cpuimx51_i2c_data); + imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data); i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices, ARRAY_SIZE(eukrea_cpuimx51_i2c_devices)); @@ -283,8 +292,6 @@ static struct sys_timer mxc_timer = { MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") /* Maintainer: Eric Bénard <eric@eukrea.com> */ - .phys_io = MX51_AIPS1_BASE_ADDR, - .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx51_map_io, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c new file mode 100644 index 000000000000..4b3a6119c5fb --- /dev/null +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -0,0 +1,331 @@ +/* + * + * Copyright (C) 2010 Eric Bénard <eric@eukrea.com> + * + * based on board-mx51_babbage.c which is + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/i2c/tsc2007.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/fsl_devices.h> +#include <linux/i2c-gpio.h> +#include <linux/spi/spi.h> +#include <linux/can/platform/mcp251x.h> + +#include <mach/eukrea-baseboards.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-mx51.h> +#include <mach/mxc_ehci.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "devices-imx51.h" +#include "devices.h" + +#define USBH1_RST (1*32 + 28) +#define ETH_RST (1*32 + 31) +#define TSC2007_IRQGPIO (2*32 + 12) +#define CAN_IRQGPIO (0*32 + 1) +#define CAN_RST (3*32 + 15) +#define CAN_NCS (3*32 + 24) +#define CAN_RXOBF (0*32 + 4) +#define CAN_RX1BF (0*32 + 6) +#define CAN_TXORTS (0*32 + 7) +#define CAN_TX1RTS (0*32 + 8) +#define CAN_TX2RTS (0*32 + 9) +#define I2C_SCL (3*32 + 16) +#define I2C_SDA (3*32 + 17) + +/* USB_CTRL_1 */ +#define MX51_USB_CTRL_1_OFFSET 0x10 +#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) + +#define MX51_USB_PLLDIV_12_MHZ 0x00 +#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 +#define MX51_USB_PLL_DIV_24_MHZ 0x02 + +#define CPUIMX51SD_GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, \ + MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP) + +static struct pad_desc eukrea_cpuimx51sd_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, + + /* USB HOST1 */ + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + MX51_PAD_USBH1_STP__USBH1_STP, + MX51_PAD_EIM_CS3__GPIO_2_28, /* PHY nRESET */ + + /* FEC */ + MX51_PAD_EIM_DTACK__GPIO_2_31, /* PHY nRESET */ + + /* HSI2C */ + MX51_PAD_I2C1_CLK__GPIO_4_16, + MX51_PAD_I2C1_DAT__GPIO_4_17, + + /* CAN */ + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, + MX51_PAD_CSPI1_MISO__ECSPI1_MISO, + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, + MX51_PAD_CSPI1_SS0__GPIO_4_24, /* nCS */ + MX51_PAD_CSI2_PIXCLK__GPIO_4_15, /* nReset */ + MX51_PAD_GPIO_1_1__GPIO_1_1, /* IRQ */ + MX51_PAD_GPIO_1_4__GPIO_1_4, /* Control signals */ + MX51_PAD_GPIO_1_6__GPIO_1_6, + MX51_PAD_GPIO_1_7__GPIO_1_7, + MX51_PAD_GPIO_1_8__GPIO_1_8, + MX51_PAD_GPIO_1_9__GPIO_1_9, + + /* Touchscreen */ + CPUIMX51SD_GPIO_3_12, /* IRQ */ +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static int ts_get_pendown_state(void) +{ + return gpio_get_value(TSC2007_IRQGPIO) ? 0 : 1; +} + +static struct tsc2007_platform_data tsc2007_info = { + .model = 2007, + .x_plate_ohms = 180, + .get_pendown_state = ts_get_pendown_state, +}; + +static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, { + I2C_BOARD_INFO("tsc2007", 0x49), + .type = "tsc2007", + .platform_data = &tsc2007_info, + .irq = gpio_to_irq(TSC2007_IRQGPIO), + }, +}; + +static const struct mxc_nand_platform_data + eukrea_cpuimx51sd_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + +/* This function is board specific as the bit mask for the plldiv will also +be different for other Freescale SoCs, thus a common bitmask is not +possible and cannot get place in /plat-mxc/ehci.c.*/ +static int initialize_otg_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + void __iomem *usbother_base; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + /* Set the PHY clock to 19.2MHz */ + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; + v |= MX51_USB_PLL_DIV_19_2_MHZ; + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + iounmap(usb_base); + return 0; +} + +static int initialize_usbh1_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + void __iomem *usbother_base; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + /* The clock for the USBH1 ULPI port will come from the PHY. */ + v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); + __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, + usbother_base + MX51_USB_CTRL_1_OFFSET); + iounmap(usb_base); + return 0; +} + +static struct mxc_usbh_platform_data dr_utmi_config = { + .init = initialize_otg_port, + .portsc = MXC_EHCI_UTMI_16BIT, + .flags = MXC_EHCI_INTERNAL_PHY, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI_WIDE, +}; + +static struct mxc_usbh_platform_data usbh1_config = { + .init = initialize_usbh1_port, + .portsc = MXC_EHCI_MODE_ULPI, + .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), +}; + +static int otg_mode_host; + +static int __init eukrea_cpuimx51sd_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode); + +static struct i2c_gpio_platform_data pdata = { + .sda_pin = I2C_SDA, + .sda_is_open_drain = 0, + .scl_pin = I2C_SCL, + .scl_is_open_drain = 0, + .udelay = 2, +}; + +static struct platform_device hsi2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev.platform_data = &pdata, +}; + +static struct mcp251x_platform_data mcp251x_info = { + .oscillator_frequency = 24E6, +}; + +static struct spi_board_info cpuimx51sd_spi_device[] = { + { + .modalias = "mcp2515", + .max_speed_hz = 6500000, + .bus_num = 0, + .mode = SPI_MODE_0, + .chip_select = 0, + .platform_data = &mcp251x_info, + .irq = gpio_to_irq(0 * 32 + 1) + }, +}; + +static int cpuimx51sd_spi1_cs[] = { + CAN_NCS, +}; + +static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = { + .chipselect = cpuimx51sd_spi1_cs, + .num_chipselect = ARRAY_SIZE(cpuimx51sd_spi1_cs), +}; + +static struct platform_device *platform_devices[] __initdata = { + &hsi2c_gpio_device, +}; + +static void __init eukrea_cpuimx51sd_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, + ARRAY_SIZE(eukrea_cpuimx51sd_pads)); + + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); + + gpio_request(ETH_RST, "eth_rst"); + gpio_set_value(ETH_RST, 1); + imx51_add_fec(NULL); + + gpio_request(CAN_IRQGPIO, "can_irq"); + gpio_direction_input(CAN_IRQGPIO); + gpio_free(CAN_IRQGPIO); + gpio_request(CAN_NCS, "can_ncs"); + gpio_direction_output(CAN_NCS, 1); + gpio_free(CAN_NCS); + gpio_request(CAN_RST, "can_rst"); + gpio_direction_output(CAN_RST, 0); + msleep(20); + gpio_set_value(CAN_RST, 1); + imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata); + spi_register_board_info(cpuimx51sd_spi_device, + ARRAY_SIZE(cpuimx51sd_spi_device)); + + gpio_request(TSC2007_IRQGPIO, "tsc2007_irq"); + gpio_direction_input(TSC2007_IRQGPIO); + gpio_free(TSC2007_IRQGPIO); + + i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices, + ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices)); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + if (otg_mode_host) + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + else { + initialize_otg_port(NULL); + mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata); + } + + gpio_request(USBH1_RST, "usb_rst"); + gpio_direction_output(USBH1_RST, 0); + msleep(20); + gpio_set_value(USBH1_RST, 1); + mxc_register_device(&mxc_usbh1_device, &usbh1_config); + +#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD + eukrea_mbimxsd51_baseboard_init(); +#endif +} + +static void __init eukrea_cpuimx51sd_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer mxc_timer = { + .init = eukrea_cpuimx51sd_timer_init, +}; + +MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") + /* Maintainer: Eric Bénard <eric@eukrea.com> */ + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx51_map_io, + .init_irq = mx51_init_irq, + .init_machine = eukrea_cpuimx51sd_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index f95c2fd94667..79ce8dcf3cda 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -13,6 +13,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -21,12 +22,13 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx51.h> -#include <mach/imx-uart.h> #include <mach/3ds_debugboard.h> +#include "devices-imx51.h" #include "devices.h" #define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6) +#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28) static struct pad_desc mx51_3ds_pads[] = { /* UART1 */ @@ -61,19 +63,25 @@ static struct pad_desc mx51_3ds_pads[] = { MX51_PAD_KEY_COL3__KEY_COL3, MX51_PAD_KEY_COL4__KEY_COL4, MX51_PAD_KEY_COL5__KEY_COL5, + + /* eCSPI2 */ + MX51_PAD_NANDF_RB2__ECSPI2_SCLK, + MX51_PAD_NANDF_RB3__ECSPI2_MISO, + MX51_PAD_NANDF_D15__ECSPI2_MOSI, + MX51_PAD_NANDF_D12__GPIO_3_28, }; /* Serial ports */ #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static inline void mxc_init_imx_uart(void) { - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); } #else /* !SERIAL_IMX */ static inline void mxc_init_imx_uart(void) @@ -127,6 +135,26 @@ static inline void mxc_init_keypad(void) } #endif +static int mx51_3ds_spi2_cs[] = { + MXC_SPI_CS(0), + MX51_3DS_ECSPI2_CS, +}; + +static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = { + .chipselect = mx51_3ds_spi2_cs, + .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs), +}; + +static struct spi_board_info mx51_3ds_spi_nor_device[] = { + { + .modalias = "m25p80", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 1, + .mode = SPI_MODE_0, + .platform_data = NULL,}, +}; + /* * Board specific initialization. */ @@ -136,6 +164,10 @@ static void __init mxc_board_init(void) ARRAY_SIZE(mx51_3ds_pads)); mxc_init_imx_uart(); + imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata); + spi_register_board_info(mx51_3ds_spi_nor_device, + ARRAY_SIZE(mx51_3ds_spi_nor_device)); + if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT)) printk(KERN_WARNING "Init of the debugboard failed, all " "devices on the board are unusable.\n"); @@ -154,8 +186,6 @@ static struct sys_timer mxc_timer = { MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") /* Maintainer: Freescale Semiconductor, Inc. */ - .phys_io = MX51_AIPS1_BASE_ADDR, - .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, .map_io = mx51_map_io, .init_irq = mx51_init_irq, diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 6e384d92e625..0821fe9b3b27 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -17,12 +17,11 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/fsl_devices.h> +#include <linux/fec.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx51.h> -#include <mach/i2c.h> #include <mach/mxc_ehci.h> #include <asm/irq.h> @@ -31,11 +30,13 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "devices-imx51.h" #include "devices.h" #define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ #define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */ -#define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */ +#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */ +#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */ /* USB_CTRL_1 */ #define MX51_USB_CTRL_1_OFFSET 0x10 @@ -45,10 +46,6 @@ #define MX51_USB_PLL_DIV_19_2_MHZ 0x01 #define MX51_USB_PLL_DIV_24_MHZ 0x02 -static struct platform_device *devices[] __initdata = { - &mxc_fec_device, -}; - static struct pad_desc mx51babbage_pads[] = { /* UART1 */ MX51_PAD_UART1_RXD__UART1_RXD, @@ -93,19 +90,41 @@ static struct pad_desc mx51babbage_pads[] = { /* USB HUB reset line*/ MX51_PAD_GPIO_1_7__GPIO_1_7, + + /* FEC */ + MX51_PAD_EIM_EB2__FEC_MDIO, + MX51_PAD_EIM_EB3__FEC_RDAT1, + MX51_PAD_EIM_CS2__FEC_RDAT2, + MX51_PAD_EIM_CS3__FEC_RDAT3, + MX51_PAD_EIM_CS4__FEC_RX_ER, + MX51_PAD_EIM_CS5__FEC_CRS, + MX51_PAD_NANDF_RB2__FEC_COL, + MX51_PAD_NANDF_RB3__FEC_RXCLK, + MX51_PAD_NANDF_RB6__FEC_RDAT0, + MX51_PAD_NANDF_RB7__FEC_TDAT0, + MX51_PAD_NANDF_CS2__FEC_TX_ER, + MX51_PAD_NANDF_CS3__FEC_MDC, + MX51_PAD_NANDF_CS4__FEC_TDAT1, + MX51_PAD_NANDF_CS5__FEC_TDAT2, + MX51_PAD_NANDF_CS6__FEC_TDAT3, + MX51_PAD_NANDF_CS7__FEC_TX_EN, + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, + + /* FEC PHY reset line */ + MX51_PAD_EIM_A20__GPIO_2_14, }; /* Serial ports */ #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static inline void mxc_init_imx_uart(void) { - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); } #else /* !SERIAL_IMX */ static inline void mxc_init_imx_uart(void) @@ -113,7 +132,7 @@ static inline void mxc_init_imx_uart(void) } #endif /* SERIAL_IMX */ -static struct imxi2c_platform_data babbage_i2c_data = { +static const struct imxi2c_platform_data babbage_i2c_data __initconst = { .bitrate = 100000, }; @@ -171,6 +190,22 @@ static inline void babbage_usbhub_reset(void) gpio_set_value(BABBAGE_USB_HUB_RESET, 1); } +static inline void babbage_fec_reset(void) +{ + int ret; + + /* reset FEC PHY */ + ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset"); + if (ret) { + printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); + return; + } + gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 0); + msleep(1); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 1); +} + /* This function is board specific as the bit mask for the plldiv will also be different for other Freescale SoCs, thus a common bitmask is not possible and cannot get place in /plat-mxc/ehci.c.*/ @@ -178,7 +213,7 @@ static int initialize_otg_port(struct platform_device *pdev) { u32 v; void __iomem *usb_base; - u32 usbother_base; + void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -196,7 +231,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) { u32 v; void __iomem *usb_base; - u32 usbother_base; + void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -250,10 +285,11 @@ static void __init mxc_board_init(void) mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, ARRAY_SIZE(mx51babbage_pads)); mxc_init_imx_uart(); - platform_add_devices(devices, ARRAY_SIZE(devices)); + babbage_fec_reset(); + imx51_add_fec(NULL); - mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data); - mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data); + imx51_add_imx_i2c(0, &babbage_i2c_data); + imx51_add_imx_i2c(1, &babbage_i2c_data); mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data); if (otg_mode_host) @@ -281,9 +317,7 @@ static struct sys_timer mxc_timer = { MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ - .phys_io = MX51_AIPS1_BASE_ADDR, - .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, .init_irq = mx51_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c new file mode 100644 index 000000000000..6e623bda3ee7 --- /dev/null +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -0,0 +1,119 @@ +/* + * Copyright (C) 2010 Linaro Limited + * + * based on code from the following + * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. + * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/fsl_devices.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-mx51.h> +#include <mach/i2c.h> +#include <mach/mxc_ehci.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "devices-imx51.h" +#include "devices.h" + +#define MX51_USB_PLL_DIV_24_MHZ 0x01 + +static struct pad_desc mx51efikamx_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, +}; + +/* Serial ports */ +#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +static const struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static inline void mxc_init_imx_uart(void) +{ + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); +} +#else /* !SERIAL_IMX */ +static inline void mxc_init_imx_uart(void) +{ +} +#endif /* SERIAL_IMX */ + +/* This function is board specific as the bit mask for the plldiv will also + * be different for other Freescale SoCs, thus a common bitmask is not + * possible and cannot get place in /plat-mxc/ehci.c. + */ +static int initialize_otg_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + void __iomem *usbother_base; + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); + + /* Set the PHY clock to 19.2MHz */ + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; + v |= MX51_USB_PLL_DIV_24_MHZ; + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + iounmap(usb_base); + return 0; +} + +static struct mxc_usbh_platform_data dr_utmi_config = { + .init = initialize_otg_port, + .portsc = MXC_EHCI_UTMI_16BIT, + .flags = MXC_EHCI_INTERNAL_PHY, +}; + +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, + ARRAY_SIZE(mx51efikamx_pads)); + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + mxc_init_imx_uart(); +} + +static void __init mx51_efikamx_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 24576000); +} + +static struct sys_timer mxc_timer = { + .init = mx51_efikamx_timer_init, +}; + +MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") + /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */ + .boot_params = MX51_PHYS_OFFSET + 0x100, + .map_io = mx51_map_io, + .init_irq = mx51_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 57c10a9926cc..f2aae92cf0e2 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -41,34 +41,66 @@ static struct clk usboh3_clk; #define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */ -static int _clk_ccgr_enable(struct clk *clk) +/* calculate best pre and post dividers to get the required divider */ +static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post, + u32 max_pre, u32 max_post) { - u32 reg; + if (div >= max_pre * max_post) { + *pre = max_pre; + *post = max_post; + } else if (div >= max_pre) { + u32 min_pre, temp_pre, old_err, err; + min_pre = DIV_ROUND_UP(div, max_post); + old_err = max_pre; + for (temp_pre = max_pre; temp_pre >= min_pre; temp_pre--) { + err = div % temp_pre; + if (err == 0) { + *pre = temp_pre; + break; + } + err = temp_pre - err; + if (err < old_err) { + old_err = err; + *pre = temp_pre; + } + } + *post = DIV_ROUND_UP(div, *pre); + } else { + *pre = div; + *post = 1; + } +} + +static void _clk_ccgr_setclk(struct clk *clk, unsigned mode) +{ + u32 reg = __raw_readl(clk->enable_reg); + + reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); + reg |= mode << clk->enable_shift; - reg = __raw_readl(clk->enable_reg); - reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift; __raw_writel(reg, clk->enable_reg); +} +static int _clk_ccgr_enable(struct clk *clk) +{ + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON); return 0; } static void _clk_ccgr_disable(struct clk *clk) { - u32 reg; - reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF); +} +static int _clk_ccgr_enable_inrun(struct clk *clk) +{ + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE); + return 0; } static void _clk_ccgr_disable_inwait(struct clk *clk) { - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); - reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE); } /* @@ -542,60 +574,60 @@ static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent) return 0; } -static unsigned long clk_uart_get_rate(struct clk *clk) -{ - u32 reg, prediv, podf; - unsigned long parent_rate; +#define clk_nfc_set_parent NULL - parent_rate = clk_get_rate(clk->parent); - - reg = __raw_readl(MXC_CCM_CSCDR1); - prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >> - MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1; - podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >> - MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1; +static unsigned long clk_nfc_get_rate(struct clk *clk) +{ + unsigned long rate; + u32 reg, div; - return parent_rate / (prediv * podf); + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >> + MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1; + rate = clk_get_rate(clk->parent) / div; + WARN_ON(rate == 0); + return rate; } -static int _clk_uart_set_parent(struct clk *clk, struct clk *parent) +static unsigned long clk_nfc_round_rate(struct clk *clk, + unsigned long rate) { - u32 reg, mux; + u32 div; + unsigned long parent_rate = clk_get_rate(clk->parent); - mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, - &lp_apm_clk); - reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK; - reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET; - __raw_writel(reg, MXC_CCM_CSCMR1); + if (!rate) + return -EINVAL; - return 0; -} + div = parent_rate / rate; -static unsigned long clk_usboh3_get_rate(struct clk *clk) -{ - u32 reg, prediv, podf; - unsigned long parent_rate; + if (parent_rate % rate) + div++; - parent_rate = clk_get_rate(clk->parent); + if (div > 8) + return -EINVAL; - reg = __raw_readl(MXC_CCM_CSCDR1); - prediv = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK) >> - MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET) + 1; - podf = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK) >> - MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET) + 1; + return parent_rate / div; - return parent_rate / (prediv * podf); } -static int _clk_usboh3_set_parent(struct clk *clk, struct clk *parent) +static int clk_nfc_set_rate(struct clk *clk, unsigned long rate) { - u32 reg, mux; + u32 reg, div; + + div = clk_get_rate(clk->parent) / rate; + if (div == 0) + div++; + if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8)) + return -EINVAL; + + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK; + reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_CBCDR); - mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, - &lp_apm_clk); - reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK; - reg |= mux << MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET; - __raw_writel(reg, MXC_CCM_CSCMR1); + while (__raw_readl(MXC_CCM_CDHIPR) & + MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){ + } return 0; } @@ -620,6 +652,17 @@ static unsigned long get_ckih2_reference_clock_rate(struct clk *clk) return ckih2_reference; } +static unsigned long clk_emi_slow_get_rate(struct clk *clk) +{ + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >> + MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1; + + return clk_get_rate(clk->parent) / div; +} + /* External high frequency clock */ static struct clk ckih_clk = { .get_rate = get_high_reference_clock_rate, @@ -715,18 +758,6 @@ static struct clk ipg_perclk = { .set_parent = _clk_ipg_per_set_parent, }; -static struct clk uart_root_clk = { - .parent = &pll2_sw_clk, - .get_rate = clk_uart_get_rate, - .set_parent = _clk_uart_set_parent, -}; - -static struct clk usboh3_clk = { - .parent = &pll2_sw_clk, - .get_rate = clk_usboh3_get_rate, - .set_parent = _clk_usboh3_set_parent, -}; - static struct clk ahb_max_clk = { .parent = &ahb_clk, .enable_reg = MXC_CCM_CCGR0, @@ -762,45 +793,183 @@ static struct clk kpp_clk = { .id = 0, }; -#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ +static struct clk emi_slow_clk = { + .parent = &pll2_sw_clk, + .enable_reg = MXC_CCM_CCGR5, + .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable_inwait, + .get_rate = clk_emi_slow_get_rate, +}; + +#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s) \ static struct clk name = { \ .id = i, \ .enable_reg = er, \ .enable_shift = es, \ - .get_rate = gr, \ - .set_rate = sr, \ + .get_rate = pfx##_get_rate, \ + .set_rate = pfx##_set_rate, \ + .round_rate = pfx##_round_rate, \ + .set_parent = pfx##_set_parent, \ .enable = _clk_ccgr_enable, \ .disable = _clk_ccgr_disable, \ .parent = p, \ .secondary = s, \ } -/* DEFINE_CLOCK(name, id, enable_reg, enable_shift, - get_rate, set_rate, parent, secondary); */ +#define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = pfx##_get_rate, \ + .set_rate = pfx##_set_rate, \ + .set_parent = pfx##_set_parent, \ + .enable = _clk_max_enable, \ + .disable = _clk_max_disable, \ + .parent = p, \ + .secondary = s, \ + } + +#define CLK_GET_RATE(name, nr, bitsname) \ +static unsigned long clk_##name##_get_rate(struct clk *clk) \ +{ \ + u32 reg, pred, podf; \ + \ + reg = __raw_readl(MXC_CCM_CSCDR##nr); \ + pred = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK) \ + >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \ + podf = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK) \ + >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \ + \ + return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), \ + (pred + 1) * (podf + 1)); \ +} + +#define CLK_SET_PARENT(name, nr, bitsname) \ +static int clk_##name##_set_parent(struct clk *clk, struct clk *parent) \ +{ \ + u32 reg, mux; \ + \ + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, \ + &pll3_sw_clk, &lp_apm_clk); \ + reg = __raw_readl(MXC_CCM_CSCMR##nr) & \ + ~MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_MASK; \ + reg |= mux << MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_OFFSET; \ + __raw_writel(reg, MXC_CCM_CSCMR##nr); \ + \ + return 0; \ +} + +#define CLK_SET_RATE(name, nr, bitsname) \ +static int clk_##name##_set_rate(struct clk *clk, unsigned long rate) \ +{ \ + u32 reg, div, parent_rate; \ + u32 pre = 0, post = 0; \ + \ + parent_rate = clk_get_rate(clk->parent); \ + div = parent_rate / rate; \ + \ + if ((parent_rate / div) != rate) \ + return -EINVAL; \ + \ + __calc_pre_post_dividers(div, &pre, &post, \ + (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK >> \ + MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET) + 1, \ + (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK >> \ + MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET) + 1);\ + \ + /* Set sdhc1 clock divider */ \ + reg = __raw_readl(MXC_CCM_CSCDR##nr) & \ + ~(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK \ + | MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK); \ + reg |= (post - 1) << \ + MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \ + reg |= (pre - 1) << \ + MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \ + __raw_writel(reg, MXC_CCM_CSCDR##nr); \ + \ + return 0; \ +} + +/* UART */ +CLK_GET_RATE(uart, 1, UART) +CLK_SET_PARENT(uart, 1, UART) + +static struct clk uart_root_clk = { + .parent = &pll2_sw_clk, + .get_rate = clk_uart_get_rate, + .set_parent = clk_uart_set_parent, +}; + +/* USBOH3 */ +CLK_GET_RATE(usboh3, 1, USBOH3) +CLK_SET_PARENT(usboh3, 1, USBOH3) + +static struct clk usboh3_clk = { + .parent = &pll2_sw_clk, + .get_rate = clk_usboh3_get_rate, + .set_parent = clk_usboh3_set_parent, +}; + +/* eCSPI */ +CLK_GET_RATE(ecspi, 2, CSPI) +CLK_SET_PARENT(ecspi, 1, CSPI) + +static struct clk ecspi_main_clk = { + .parent = &pll3_sw_clk, + .get_rate = clk_ecspi_get_rate, + .set_parent = clk_ecspi_set_parent, +}; + +/* eSDHC */ +CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1) +CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1) +CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1) + +CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2) +CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2) +CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2) + +#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = gr, \ + .set_rate = sr, \ + .enable = e, \ + .disable = d, \ + .parent = p, \ + .secondary = s, \ + } + +#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ + DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s) /* Shared peripheral bus arbiter */ DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET, NULL, NULL, &ipg_clk, NULL); /* UART */ -DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, - NULL, NULL, &uart_root_clk, NULL); -DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, - NULL, NULL, &uart_root_clk, NULL); -DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, - NULL, NULL, &uart_root_clk, NULL); DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &ipg_clk, &aips_tz1_clk); DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, &ipg_clk, &aips_tz1_clk); DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, NULL, NULL, &ipg_clk, &spba_clk); +DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, + NULL, NULL, &uart_root_clk, &uart1_ipg_clk); +DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, + NULL, NULL, &uart_root_clk, &uart2_ipg_clk); +DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, + NULL, NULL, &uart_root_clk, &uart3_ipg_clk); /* GPT */ -DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, - NULL, NULL, &ipg_clk, NULL); DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &ipg_clk, &gpt_ipg_clk); /* I2C */ DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET, @@ -814,6 +983,52 @@ DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, NULL, NULL, &ipg_clk, NULL); +/* NFC */ +DEFINE_CLOCK_CCGR(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET, + clk_nfc, &emi_slow_clk, NULL); + +/* SSI */ +DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET, + NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk); +DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET, + NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk); + +/* eCSPI */ +DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable, + &ipg_clk, &spba_clk); +DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET, + NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk); +DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable, + &ipg_clk, &aips_tz2_clk); +DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET, + NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk); + +/* CSPI */ +DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &ipg_clk, &aips_tz2_clk); +DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET, + NULL, NULL, &ipg_clk, &cspi_ipg_clk); + +/* SDMA */ +DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET, + NULL, NULL, &ahb_clk, NULL); + +/* eSDHC */ +DEFINE_CLOCK_FULL(esdhc1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG0_OFFSET, + NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL); +DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET, + clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk); +DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET, + NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL); +DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET, + clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk); + #define _REGISTER_CLOCK(d, n, c) \ { \ .dev_id = d, \ @@ -837,6 +1052,18 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk) + _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + _REGISTER_CLOCK(NULL, "ckih", ckih_clk) + _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk) + _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk) + _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) + _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) + _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) }; static void clk_tree_init(void) @@ -880,6 +1107,14 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc, /* set the usboh3_clk parent to pll2_sw_clk */ clk_set_parent(&usboh3_clk, &pll2_sw_clk); + /* Set SDHC parents to be PLL2 */ + clk_set_parent(&esdhc1_clk, &pll2_sw_clk); + clk_set_parent(&esdhc2_clk, &pll2_sw_clk); + + /* set SDHC root clock as 166.25MHZ*/ + clk_set_rate(&esdhc1_clk, 166250000); + clk_set_rate(&esdhc2_clk, 166250000); + /* System timer */ mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_MXC_INT_GPT); diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index 2d37785e3857..eaacb6e9b5d0 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -70,6 +70,25 @@ int mx51_revision(void) } EXPORT_SYMBOL(mx51_revision); +#ifdef CONFIG_NEON + +/* + * All versions of the silicon before Rev. 3 have broken NEON implementations. + * Dependent on link order - so the assumption is that vfp_init is called + * before us. + */ +static int __init mx51_neon_fixup(void) +{ + if (mx51_revision() < MX51_CHIP_REV_3_0 && (elf_hwcap & HWCAP_NEON)) { + elf_hwcap &= ~HWCAP_NEON; + pr_info("Turning off NEON support, detected broken NEON implementation\n"); + } + return 0; +} + +late_initcall(mx51_neon_fixup); +#endif + static int __init post_cpu_init(void) { unsigned int reg; diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h new file mode 100644 index 000000000000..5cc910e60538 --- /dev/null +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx51.h> +#include <mach/devices-common.h> + +extern const struct imx_fec_data imx51_fec_data __initconst; +#define imx51_add_fec(pdata) \ + imx_add_fec(&imx51_fec_data, pdata) + +extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst; +#define imx51_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata) + +extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst; +#define imx51_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata) + +extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst; +#define imx51_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata) + +extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst; +#define imx51_add_mxc_nand(pdata) \ + imx_add_mxc_nand(&imx51_mxc_nand_data, pdata) + +extern const struct imx_spi_imx_data imx51_cspi_data __initconst; +#define imx51_add_cspi(pdata) \ + imx_add_spi_imx(&imx51_cspi_data, pdata) + +extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst; +#define imx51_add_ecspi(id, pdata) \ + imx_add_spi_imx(&imx51_ecspi_data[id], pdata) + +extern const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst; +#define imx51_add_esdhc(id, pdata) \ + imx_add_esdhc(&imx51_esdhc_data[id], pdata) diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 1920ff4963b2..4c7be87a7c9d 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -17,120 +17,6 @@ #include <mach/imx-uart.h> #include <mach/irqs.h> -static struct resource uart0[] = { - { - .start = MX51_UART1_BASE_ADDR, - .end = MX51_UART1_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART1, - .end = MX51_MXC_INT_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = MX51_UART2_BASE_ADDR, - .end = MX51_UART2_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART2, - .end = MX51_MXC_INT_UART2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = MX51_UART3_BASE_ADDR, - .end = MX51_UART3_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART3, - .end = MX51_MXC_INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - -static struct resource mxc_fec_resources[] = { - { - .start = MX51_MXC_FEC_BASE_ADDR, - .end = MX51_MXC_FEC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_FEC, - .end = MX51_MXC_INT_FEC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_fec_device = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_fec_resources), - .resource = mxc_fec_resources, -}; - -static struct resource mxc_i2c0_resources[] = { - { - .start = MX51_I2C1_BASE_ADDR, - .end = MX51_I2C1_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_I2C1, - .end = MX51_MXC_INT_I2C1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device0 = { - .name = "imx-i2c", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_i2c0_resources), - .resource = mxc_i2c0_resources, -}; - -static struct resource mxc_i2c1_resources[] = { - { - .start = MX51_I2C2_BASE_ADDR, - .end = MX51_I2C2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_I2C2, - .end = MX51_MXC_INT_I2C2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device1 = { - .name = "imx-i2c", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_i2c1_resources), - .resource = mxc_i2c1_resources, -}; - static struct resource mxc_hsi2c_resources[] = { { .start = MX51_HSI2C_DMA_BASE_ADDR, diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h index e509cfaad1d4..af1d07c0bbc1 100644 --- a/arch/arm/mach-mx5/devices.h +++ b/arch/arm/mach-mx5/devices.h @@ -1,12 +1,6 @@ -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; -extern struct platform_device mxc_fec_device; extern struct platform_device mxc_usbdr_host_device; extern struct platform_device mxc_usbh1_device; extern struct platform_device mxc_usbdr_udc_device; extern struct platform_device mxc_wdt; -extern struct platform_device mxc_i2c_device0; -extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_hsi2c_device; extern struct platform_device mxc_keypad_device; diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c index ffa93d1d6ef8..a2e6e8c39d25 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c @@ -30,6 +30,7 @@ #include <asm/mach/arch.h> +#include "devices-imx51.h" #include "devices.h" #define MBIMX51_TSC2007_GPIO (2*32 + 30) @@ -112,9 +113,25 @@ static struct pad_desc mbimx51_pads[] = { MX51_PAD_KEY_COL1__KEY_COL1, MX51_PAD_KEY_COL2__KEY_COL2, MX51_PAD_KEY_COL3__KEY_COL3, + + /* SD 1 */ + MX51_PAD_SD1_CMD__SD1_CMD, + MX51_PAD_SD1_CLK__SD1_CLK, + MX51_PAD_SD1_DATA0__SD1_DATA0, + MX51_PAD_SD1_DATA1__SD1_DATA1, + MX51_PAD_SD1_DATA2__SD1_DATA2, + MX51_PAD_SD1_DATA3__SD1_DATA3, + + /* SD 2 */ + MX51_PAD_SD2_CMD__SD2_CMD, + MX51_PAD_SD2_CLK__SD2_CLK, + MX51_PAD_SD2_DATA0__SD2_DATA0, + MX51_PAD_SD2_DATA1__SD2_DATA1, + MX51_PAD_SD2_DATA2__SD2_DATA2, + MX51_PAD_SD2_DATA3__SD2_DATA3, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -158,9 +175,11 @@ struct tsc2007_platform_data tsc2007_data = { static struct i2c_board_info mbimx51_i2c_devices[] = { { - I2C_BOARD_INFO("tsc2007", 0x48), + I2C_BOARD_INFO("tsc2007", 0x49), .irq = MBIMX51_TSC2007_IRQ, .platform_data = &tsc2007_data, + }, { + I2C_BOARD_INFO("tlv320aic23", 0x1a), }, }; @@ -172,8 +191,8 @@ void __init eukrea_mbimx51_baseboard_init(void) mxc_iomux_v3_setup_multiple_pads(mbimx51_pads, ARRAY_SIZE(mbimx51_pads)); - mxc_register_device(&mxc_uart_device1, NULL); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(1, NULL); + imx51_add_imx_uart(2, &uart_pdata); gpio_request(MBIMX51_LED0, "LED0"); gpio_direction_output(MBIMX51_LED0, 1); @@ -197,4 +216,7 @@ void __init eukrea_mbimx51_baseboard_init(void) set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING); i2c_register_board_info(1, mbimx51_i2c_devices, ARRAY_SIZE(mbimx51_i2c_devices)); + + imx51_add_esdhc(0, NULL); + imx51_add_esdhc(1, NULL); } diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c new file mode 100644 index 000000000000..2b48f5190830 --- /dev/null +++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2010 Eric Benard - eric@eukrea.com + * + * Based on pcm970-baseboard.c which is : + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/types.h> +#include <linux/init.h> + +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/leds.h> +#include <linux/platform_device.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/i2c.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx51.h> +#include <mach/audmux.h> + +#include "devices-imx51.h" +#include "devices.h" + +#define MBIMXSD_GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, \ + MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP) + +static struct pad_desc eukrea_mbimxsd_pads[] = { + /* LED */ + MX51_PAD_NANDF_D10__GPIO_3_30, + /* SWITCH */ + MBIMXSD_GPIO_3_31, + /* UART2 */ + MX51_PAD_UART2_RXD__UART2_RXD, + MX51_PAD_UART2_TXD__UART2_TXD, + /* UART 3 */ + MX51_PAD_UART3_RXD__UART3_RXD, + MX51_PAD_UART3_TXD__UART3_TXD, + MX51_PAD_KEY_COL4__UART3_RTS, + MX51_PAD_KEY_COL5__UART3_CTS, + /* SD */ + MX51_PAD_SD1_CMD__SD1_CMD, + MX51_PAD_SD1_CLK__SD1_CLK, + MX51_PAD_SD1_DATA0__SD1_DATA0, + MX51_PAD_SD1_DATA1__SD1_DATA1, + MX51_PAD_SD1_DATA2__SD1_DATA2, + MX51_PAD_SD1_DATA3__SD1_DATA3, +}; + +#define GPIO_LED1 (2 * 32 + 30) +#define GPIO_SWITCH1 (2 * 32 + 31) + +static struct gpio_led eukrea_mbimxsd_leds[] = { + { + .name = "led1", + .default_trigger = "heartbeat", + .active_low = 1, + .gpio = GPIO_LED1, + }, +}; + +static struct gpio_led_platform_data eukrea_mbimxsd_led_info = { + .leds = eukrea_mbimxsd_leds, + .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), +}; + +static struct platform_device eukrea_mbimxsd_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &eukrea_mbimxsd_led_info, + }, +}; + +static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { + { + .gpio = GPIO_SWITCH1, + .code = BTN_0, + .desc = "BP1", + .active_low = 1, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = { + .buttons = eukrea_mbimxsd_gpio_buttons, + .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), +}; + +static struct platform_device eukrea_mbimxsd_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &eukrea_mbimxsd_button_data, + } +}; + +static struct platform_device *platform_devices[] __initdata = { + &eukrea_mbimxsd_leds_gpio, + &eukrea_mbimxsd_button_device, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { + { + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, +}; + +/* + * system init for baseboard usage. Will be called by cpuimx51sd init. + * + * Add platform devices present on this baseboard and init + * them from CPU side as far as required to use them later on + */ +void __init eukrea_mbimxsd51_baseboard_init(void) +{ + if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, + ARRAY_SIZE(eukrea_mbimxsd_pads))) + printk(KERN_ERR "error setting mbimxsd pads !\n"); + + imx51_add_imx_uart(1, NULL); + imx51_add_imx_uart(2, &uart_pdata); + + imx51_add_esdhc(0, NULL); + + gpio_request(GPIO_LED1, "LED1"); + gpio_direction_output(GPIO_LED1, 1); + gpio_free(GPIO_LED1); + + gpio_request(GPIO_SWITCH1, "SWITCH1"); + gpio_direction_input(GPIO_SWITCH1); + gpio_free(GPIO_SWITCH1); + + i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, + ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c index 69816ba82930..395d83be8c98 100644 --- a/arch/arm/mach-mxc91231/magx-zn5.c +++ b/arch/arm/mach-mxc91231/magx-zn5.c @@ -53,8 +53,6 @@ struct sys_timer zn5_timer = { }; MACHINE_START(MAGX_ZN5, "Motorola Zn5") - .phys_io = MXC91231_AIPS1_BASE_ADDR, - .io_pg_offst = ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MXC91231_PHYS_OFFSET + 0x100, .map_io = mxc91231_map_io, .init_irq = mxc91231_init_irq, diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S index e96339e71d88..56a915228180 100644 --- a/arch/arm/mach-netx/include/mach/debug-macro.S +++ b/arch/arm/mach-netx/include/mach/debug-macro.S @@ -13,12 +13,10 @@ #include "hardware.h" - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x00100000 @ physical - movne \rx, #io_p2v(0x00100000) @ virtual - orr \rx, \rx, #0x00000a00 + .macro addruart, rp, rv + mov \rp, #0x00000a00 + orr \rv, \rp, #io_p2v(0x00100000) @ virtual + orr \rp, \rp, #0x00100000 @ physical .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h index 25d5cc676e0f..7cca3574308f 100644 --- a/arch/arm/mach-netx/include/mach/vmalloc.h +++ b/arch/arm/mach-netx/include/mach/vmalloc.h @@ -16,4 +16,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c index c9b174bc8ccf..ca8b203a3c99 100644 --- a/arch/arm/mach-netx/nxdb500.c +++ b/arch/arm/mach-netx/nxdb500.c @@ -200,8 +200,6 @@ static void __init nxdb500_init(void) } MACHINE_START(NXDB500, "Hilscher nxdb500") - .phys_io = 0x00100000, - .io_pg_offst = (io_p2v(0x00100000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = netx_map_io, .init_irq = netx_init_irq, diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c index 15b54c62d60f..d775cbe07278 100644 --- a/arch/arm/mach-netx/nxdkn.c +++ b/arch/arm/mach-netx/nxdkn.c @@ -93,8 +93,6 @@ static void __init nxdkn_init(void) } MACHINE_START(NXDKN, "Hilscher nxdkn") - .phys_io = 0x00100000, - .io_pg_offst = (io_p2v(0x00100000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = netx_map_io, .init_irq = netx_init_irq, diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c index 1061c01ff679..de369cd1dcbe 100644 --- a/arch/arm/mach-netx/nxeb500hmi.c +++ b/arch/arm/mach-netx/nxeb500hmi.c @@ -177,8 +177,6 @@ static void __init nxeb500hmi_init(void) } MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi") - .phys_io = 0x00100000, - .io_pg_offst = (io_p2v(0x00100000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = netx_map_io, .init_irq = netx_init_irq, diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 841d459ad59d..139930350d93 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -276,8 +276,6 @@ static void __init nhk8815_platform_init(void) MACHINE_START(NOMADIK, "NHK8815") /* Maintainer: ST MicroElectronics */ - .phys_io = NOMADIK_UART0_BASE, - .io_pg_offst = (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc, .boot_params = 0x100, .map_io = cpu8815_map_io, .init_irq = cpu8815_init_irq, diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S index 4f92acfba954..e7151b4b8889 100644 --- a/arch/arm/mach-nomadik/include/mach/debug-macro.S +++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S @@ -10,13 +10,11 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 @ physical base address - movne \rx, #0xf0000000 @ virtual base - add \rx, \rx, #0x00100000 - add \rx, \rx, #0x000fb000 + .macro addruart, rp, rv + mov \rp, #0x00100000 + add \rp, \rp, #0x000fb000 + add \rv, \rp, #0xf0000000 @ virtual base + add \rp, \rp, #0x10000000 @ physical base address .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S index 5c934bdb7158..5a2acbdc3d67 100644 --- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S +++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S @@ -12,11 +12,9 @@ #include <mach/regs-board-a9m9750dev.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0) - ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0)) + .macro addruart, rp, rv + ldr \rp, =NS9XXX_CSxSTAT_PHYS(0) + ldr \rv, =io_p2v(NS9XXX_CSxSTAT_PHYS(0)) .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c index 9f79266f08e2..d70257042480 100644 --- a/arch/arm/mach-nuc93x/mach-nuc932evb.c +++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c @@ -35,8 +35,6 @@ static void __init nuc932evb_init(void) MACHINE_START(NUC932EVB, "NUC932EVB") /* Maintainer: Wan ZongShun */ - .phys_io = NUC93X_PA_UART, - .io_pg_offst = (((u32)NUC93X_VA_UART) >> 18) & 0xfffc, .boot_params = 0, .map_io = nuc932evb_map_io, .init_irq = nuc93x_init_irq, diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 41992ab71961..73c86392fcd3 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -297,8 +297,6 @@ static void __init ams_delta_map_io(void) MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") /* Maintainer: Jonathan McDowell <noodles@earth.li> */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = ams_delta_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 180ce79e5eac..149fdd32e127 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -386,8 +386,6 @@ static void __init omap_fsample_map_io(void) MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") /* Maintainer: Brian Swetland <swetland@google.com> */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_fsample_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 93b9ab8fc3be..23f4ab9e2651 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -94,8 +94,6 @@ static void __init omap_generic_map_io(void) MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") /* Maintainer: Tony Lindgren <tony@atomide.com> */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_generic_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index d2cda58bcc48..197adb49dc5a 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -458,8 +458,6 @@ static void __init h2_map_io(void) MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak <imre.deak@nokia.com> */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = h2_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index c2ef4ff846c7..9126e3e37b4a 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -446,8 +446,6 @@ static void __init h3_map_io(void) MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = h3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 311899ff5ffc..86afb2952225 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -300,8 +300,6 @@ static void __init htcherald_init_irq(void) MACHINE_START(HERALD, "HTC Herald") /* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */ /* Maintainer: wing-linux.sourceforge.net */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = htcherald_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 3daf87ad2576..dc2b86fd66c1 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -459,8 +459,6 @@ static void __init innovator_map_io(void) MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") /* Maintainer: MontaVista Software, Inc. */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = innovator_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 51a4539aecf5..aa8375b2a0a3 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -262,8 +262,6 @@ static void __init omap_nokia770_map_io(void) } MACHINE_START(NOKIA770, "Nokia 770") - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_nokia770_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 679740cc1e90..e9dd79149a8e 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -580,8 +580,6 @@ static void __init osk_map_io(void) MACHINE_START(OMAP_OSK, "TI-OSK") /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = osk_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 782bb257a85d..f32738b1eb6b 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -285,8 +285,6 @@ static void __init omap_palmte_map_io(void) } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_palmte_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 0b35ef54a64f..ed1400a67f75 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -317,8 +317,6 @@ static void __init omap_palmtt_map_io(void) } MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_palmtt_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 66362903b6e2..d7a245cef9a4 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -338,8 +338,6 @@ omap_palmz71_map_io(void) } MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_palmz71_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 34ab354758b0..a8d16a255c18 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -347,8 +347,6 @@ static void __init omap_perseus2_map_io(void) MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") /* Maintainer: Kevin Hilman <kjh@hilman.org> */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_perseus2_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 2eb148b8de93..d25f59e5a773 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -419,8 +419,6 @@ static void __init omap_sx1_map_io(void) } MACHINE_START(SX1, "OMAP310 based Siemens SX1") - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_sx1_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 6b3cf14bc757..f5992c239bcd 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -283,8 +283,6 @@ EXPORT_SYMBOL(voiceblue_wdt_ping); MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") /* Maintainer: Ladislav Michl <michl@2n.cz> */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = voiceblue_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 671408eb4ab4..6a0fa0462365 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -28,56 +28,58 @@ omap_uart_virt: .word 0x0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rx, tmp + .macro addruart, rp, rv /* Use omap_uart_phys/virt if already configured */ -9: mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address - ldrne \rx, =omap_uart_virt @ virtual base - ldr \rx, [\rx, #0] - cmp \rx, #0 @ is port configured? +9: mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rp, =omap_uart_phys @ MMU enabled + add \rv, \rp, #4 @ omap_uart_virt + ldr \rp, [\rp, #0] + ldr \rv, [\rv, #0] + cmp \rp, #0 @ is port configured? + cmpne \rv, #0 bne 99f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =OMAP_UART_INFO - ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) - ldr \rx, [\rx, #0] + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =OMAP_UART_INFO @ MMU not enabled + ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled + ldr \rp, [\rp, #0] /* Select the UART to use based on the UART1 scratchpad value */ -10: cmp \rx, #0 @ no port configured? +10: cmp \rp, #0 @ no port configured? beq 11f @ if none, try to use UART1 - cmp \rx, #OMAP1UART1 + cmp \rp, #OMAP1UART1 beq 11f @ configure OMAP1UART1 - cmp \rx, #OMAP1UART2 + cmp \rp, #OMAP1UART2 beq 12f @ configure OMAP1UART2 - cmp \rx, #OMAP1UART3 + cmp \rp, #OMAP1UART3 beq 13f @ configure OMAP2UART3 /* Configure the UART offset from the phys/virt base */ -11: mov \rx, #0x00fb0000 @ OMAP1UART1 +11: mov \rp, #0x00fb0000 @ OMAP1UART1 b 98f -12: mov \rx, #0x00fb0000 @ OMAP1UART1 - orr \rx, \rx, #0x00000800 @ OMAP1UART2 +12: mov \rp, #0x00fb0000 @ OMAP1UART1 + orr \rp, \rp, #0x00000800 @ OMAP1UART2 b 98f -13: mov \rx, #0x00fb0000 @ OMAP1UART1 - orr \rx, \rx, #0x00000800 @ OMAP1UART2 - orr \rx, \rx, #0x00009000 @ OMAP1UART3 +13: mov \rp, #0x00fb0000 @ OMAP1UART1 + orr \rp, \rp, #0x00000800 @ OMAP1UART2 + orr \rp, \rp, #0x00009000 @ OMAP1UART3 /* Store both phys and virt address for the uart */ -98: add \rx, \rx, #0xff000000 @ phys base - mrc p15, 0, \tmp, c1, c0 - tst \tmp, #1 @ MMU enabled? - ldreq \tmp, =__virt_to_phys(omap_uart_phys) - ldrne \tmp, =omap_uart_phys - str \rx, [\tmp, #0] - sub \rx, \rx, #0xff000000 @ phys base - add \rx, \rx, #0xfe000000 @ virt base - ldreq \tmp, =__virt_to_phys(omap_uart_virt) - ldrne \tmp, =omap_uart_virt - str \rx, [\tmp, #0] +98: add \rp, \rp, #0xff000000 @ phys base + mrc p15, 0, \rv, c1, c0 + tst \rv, #1 @ MMU enabled? + ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rv, =omap_uart_phys @ MMU enabled + str \rp, [\rv, #0] + sub \rp, \rp, #0xff000000 @ phys base + add \rp, \rp, #0xfe000000 @ virt base + add \rv, \rv, #4 @ omap_uart_lsr + str \rp, [\rv, #0] b 9b 99: .endm diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h index 1b2af14df151..b001f67d695b 100644 --- a/arch/arm/mach-omap1/include/mach/vmalloc.h +++ b/arch/arm/mach-omap1/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) +#define VMALLOC_END 0xd8000000 diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 8538e4131d27..b857ce484510 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -253,8 +253,6 @@ static void __init omap_2430sdp_map_io(void) MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_2430sdp_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 67b95b5f1a2f..a5b095cf2adc 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -817,8 +817,6 @@ static void __init omap_3430sdp_init(void) MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index b359c3f7bb39..fd27ac0860b0 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -217,8 +217,6 @@ static void __init omap_sdp_init(void) } MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 9447644774c2..0b6a65f3a10a 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -458,8 +458,6 @@ static void __init omap_4430sdp_map_io(void) MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_4430sdp_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4d0f58592864..f85c8da17e8b 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -462,8 +462,6 @@ static void __init am3517_evm_init(void) } MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index c6421a72514a..68f07f5f441a 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -356,8 +356,6 @@ static void __init omap_apollon_map_io(void) MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_apollon_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e10bc109415c..934d9380c372 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -809,8 +809,6 @@ static void __init cm_t35_init(void) } MACHINE_START(CM_T35, "Compulab CM-T35") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index a07086d6a0b2..2205c20a4cdb 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -800,8 +800,6 @@ static void __init devkit8000_init(void) } MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 3482b99e8c86..69064b1c6a75 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -54,8 +54,6 @@ static void __init omap_generic_map_io(void) MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_generic_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index e09bd686389f..cc39fc866524 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -376,8 +376,6 @@ static void __init omap_h4_map_io(void) MACHINE_START(OMAP_H4, "OMAP2420 H4 board") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_h4_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 175f04339761..b62a68ba069b 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -533,8 +533,6 @@ static void __init igep2_init(void) } MACHINE_START(IGEP0020, "IGEP v2 board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 00d9b13b01c5..f28fd77bceb3 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -442,8 +442,6 @@ static void __init omap_ldp_init(void) } MACHINE_START(OMAP_LDP, "OMAP LDP board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index a3e2b49aa39f..3f7966873507 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -674,8 +674,6 @@ static void __init n8x0_init_machine(void) } MACHINE_START(NOKIA_N800, "Nokia N800") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .reserve = omap_reserve, @@ -685,8 +683,6 @@ MACHINE_START(NOKIA_N800, "Nokia N800") MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .reserve = omap_reserve, @@ -696,8 +692,6 @@ MACHINE_START(NOKIA_N810, "Nokia N810") MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 87969c7df652..9d9f5b881ee8 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -487,8 +487,6 @@ static void __init omap3_beagle_init(void) MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index f76d9c0a47a1..8936e4fba334 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -714,8 +714,6 @@ static void __init omap3_evm_init(void) MACHINE_START(OMAP3EVM, "OMAP3 EVM") /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index dd3af2be13be..b7d6df4e3cf9 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -717,8 +717,6 @@ static void __init omap3pandora_init(void) } MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index bcd01d278c65..bc5ac83bd4cf 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -654,8 +654,6 @@ static void __init omap3_stalker_init(void) MACHINE_START(SBC3530, "OMAP3 STALKER") /* Maintainer: Jason Lam -lzg@ema-tech.com */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .init_irq = omap3_stalker_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 663c62d271e8..0e99ce584dbf 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -538,8 +538,6 @@ static void __init omap3_touchbook_init(void) MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index c03d1d56db56..db69bcadf4c7 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -294,8 +294,6 @@ static void __init omap4_panda_map_io(void) MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") /* Maintainer: David Anders - Texas Instruments Inc */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap4_panda_map_io, .init_irq = omap4_panda_init_irq, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 4c4843618350..5e528ca015a1 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -501,8 +501,6 @@ static void __init overo_init(void) } MACHINE_START(OVERO, "Gumstix Overo") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index a58e8cb1a7fc..36f2cf4efd57 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -150,8 +150,6 @@ static void __init rx51_map_io(void) MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = rx51_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 3ad9ecf7f5e2..24bbd0def64f 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -141,8 +141,6 @@ static void __init omap_zoom2_init(void) } MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") - .phys_io = ZOOM_UART_BASE, - .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 6ca0b8341615..b2bb3ff971ac 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -123,8 +123,6 @@ static void __init omap_zoom_init(void) } MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") - .phys_io = ZOOM_UART_BASE, - .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 09331bbbda52..6a4d4136002e 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -31,95 +31,94 @@ omap_uart_lsr: .word 0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rx, tmp + .macro addruart, rp, rv /* Use omap_uart_phys/virt if already configured */ -10: mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address - ldrne \rx, =omap_uart_virt @ virtual base address - ldr \rx, [\rx, #0] - cmp \rx, #0 @ is port configured? +10: mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rp, =omap_uart_phys @ MMU enabled + add \rv, \rp, #4 @ omap_uart_virt + ldr \rp, [\rp, #0] + ldr \rv, [\rv, #0] + cmp \rp, #0 @ is port configured? + cmpne \rv, #0 bne 99f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =OMAP_UART_INFO - ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) - ldr \rx, [\rx, #0] + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =OMAP_UART_INFO @ MMU not enabled + ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled + ldr \rp, [\rp, #0] /* Select the UART to use based on the UART1 scratchpad value */ - cmp \rx, #0 @ no port configured? + cmp \rp, #0 @ no port configured? beq 21f @ if none, try to use UART1 - cmp \rx, #OMAP2UART1 @ OMAP2/3/4UART1 + cmp \rp, #OMAP2UART1 @ OMAP2/3/4UART1 beq 21f @ configure OMAP2/3/4UART1 - cmp \rx, #OMAP2UART2 @ OMAP2/3/4UART2 + cmp \rp, #OMAP2UART2 @ OMAP2/3/4UART2 beq 22f @ configure OMAP2/3/4UART2 - cmp \rx, #OMAP2UART3 @ only on 24xx + cmp \rp, #OMAP2UART3 @ only on 24xx beq 23f @ configure OMAP2UART3 - cmp \rx, #OMAP3UART3 @ only on 34xx + cmp \rp, #OMAP3UART3 @ only on 34xx beq 33f @ configure OMAP3UART3 - cmp \rx, #OMAP4UART3 @ only on 44xx + cmp \rp, #OMAP4UART3 @ only on 44xx beq 43f @ configure OMAP4UART3 - cmp \rx, #OMAP3UART4 @ only on 36xx + cmp \rp, #OMAP3UART4 @ only on 36xx beq 34f @ configure OMAP3UART4 - cmp \rx, #OMAP4UART4 @ only on 44xx + cmp \rp, #OMAP4UART4 @ only on 44xx beq 44f @ configure OMAP4UART4 - cmp \rx, #ZOOM_UART @ only on zoom2/3 + cmp \rp, #ZOOM_UART @ only on zoom2/3 beq 95f @ configure ZOOM_UART /* Configure the UART offset from the phys/virt base */ -21: mov \rx, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4 +21: mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4 b 98f -22: mov \rx, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4 +22: mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4 b 98f -23: mov \rx, #UART_OFFSET(OMAP2_UART3_BASE) +23: mov \rp, #UART_OFFSET(OMAP2_UART3_BASE) b 98f -33: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE) - add \rx, \rx, #0x00fb0000 - add \rx, \rx, #0x00006000 @ OMAP3_UART3_BASE +33: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) + add \rp, \rp, #0x00fb0000 + add \rp, \rp, #0x00006000 @ OMAP3_UART3_BASE b 98f -34: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE) - add \rx, \rx, #0x00fb0000 - add \rx, \rx, #0x00028000 @ OMAP3_UART4_BASE +34: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) + add \rp, \rp, #0x00fb0000 + add \rp, \rp, #0x00028000 @ OMAP3_UART4_BASE b 98f -43: mov \rx, #UART_OFFSET(OMAP4_UART3_BASE) +43: mov \rp, #UART_OFFSET(OMAP4_UART3_BASE) b 98f -44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE) +44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE) b 98f -95: ldr \rx, =ZOOM_UART_BASE - mrc p15, 0, \tmp, c1, c0 - tst \tmp, #1 @ MMU enabled? - ldreq \tmp, =__virt_to_phys(omap_uart_phys) - ldrne \tmp, =omap_uart_phys - str \rx, [\tmp, #0] - ldr \rx, =ZOOM_UART_VIRT - ldreq \tmp, =__virt_to_phys(omap_uart_virt) - ldrne \tmp, =omap_uart_virt - str \rx, [\tmp, #0] - mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT) - ldreq \tmp, =__virt_to_phys(omap_uart_lsr) - ldrne \tmp, =omap_uart_lsr - str \rx, [\tmp, #0] +95: ldr \rp, =ZOOM_UART_BASE + mrc p15, 0, \rv, c1, c0 + tst \rv, #1 @ MMU enabled? + ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rv, =omap_uart_phys @ MMU enabled + str \rp, [\rv, #0] + ldr \rp, =ZOOM_UART_VIRT + add \rv, \rv, #4 @ omap_uart_virt + str \rp, [\rv, #0] + mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT) + add \rv, \rv, #4 @ omap_uart_lsr + str \rp, [\rv, #0] b 10b /* Store both phys and virt address for the uart */ -98: add \rx, \rx, #0x48000000 @ phys base - mrc p15, 0, \tmp, c1, c0 - tst \tmp, #1 @ MMU enabled? - ldreq \tmp, =__virt_to_phys(omap_uart_phys) - ldrne \tmp, =omap_uart_phys - str \rx, [\tmp, #0] - sub \rx, \rx, #0x48000000 @ phys base - add \rx, \rx, #0xfa000000 @ virt base - ldreq \tmp, =__virt_to_phys(omap_uart_virt) - ldrne \tmp, =omap_uart_virt - str \rx, [\tmp, #0] - mov \rx, #(UART_LSR << OMAP_PORT_SHIFT) - ldreq \tmp, =__virt_to_phys(omap_uart_lsr) - ldrne \tmp, =omap_uart_lsr - str \rx, [\tmp, #0] +98: add \rp, \rp, #0x48000000 @ phys base + mrc p15, 0, \rv, c1, c0 + tst \rv, #1 @ MMU enabled? + ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rv, =omap_uart_phys @ MMU enabled + str \rp, [\rv, #0] + sub \rp, \rp, #0x48000000 @ phys base + add \rp, \rp, #0xfa000000 @ virt base + add \rv, \rv, #4 @ omap_uart_virt + str \rp, [\rv, #0] + mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) + add \rv, \rv, #4 @ omap_uart_lsr + str \rp, [\rv, #0] b 10b 99: @@ -131,9 +130,9 @@ omap_uart_lsr: .word 0 .macro busyuart,rd,rx 1001: mrc p15, 0, \rd, c1, c0 - tst \rd, #1 @ MMU enabled? - ldreq \rd, =__virt_to_phys(omap_uart_lsr) - ldrne \rd, =omap_uart_lsr + tst \rd, #1 @ MMU enabled? + ldreq \rd, =__virt_to_phys(omap_uart_lsr) @ MMU not enabled + ldrne \rd, =omap_uart_lsr @ MMU enabled ldr \rd, [\rd, #0] ldrb \rd, [\rx, \rd] and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h index 9ce9b6e8ad23..4da31e997efe 100644 --- a/arch/arm/mach-omap2/include/mach/vmalloc.h +++ b/arch/arm/mach-omap2/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x38000000) +#define VMALLOC_END 0xf8000000 diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index 7130904ad999..b1c451f5ee27 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -336,8 +336,6 @@ static void __init d2net_init(void) #ifdef CONFIG_MACH_D2NET MACHINE_START(D2NET, "LaCie d2 Network") - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = d2net_init, .map_io = orion5x_map_io, @@ -349,8 +347,6 @@ MACHINE_END #ifdef CONFIG_MACH_BIGDISK MACHINE_START(BIGDISK, "LaCie Big Disk Network") - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = d2net_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index d318bea2af91..df1083f5b6eb 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -358,8 +358,6 @@ static void __init db88f5281_init(void) MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = db88f5281_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index a47100d46a4e..3a7bc0e36982 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -730,8 +730,6 @@ static void __init dns323_init(void) /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ MACHINE_START(DNS323, "D-Link DNS-323") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = dns323_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index b24ee0c2cd61..ba98459f44b0 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -251,8 +251,6 @@ static void __init edmini_v2_init(void) /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2") /* Maintainer: Christopher Moore <moore@free.fr> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = edmini_v2_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S index 91e0e39bb23f..5e3bf5b68aec 100644 --- a/arch/arm/mach-orion5x/include/mach/debug-macro.S +++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S @@ -10,12 +10,11 @@ #include <mach/orion5x.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =ORION5X_REGS_PHYS_BASE - ldrne \rx, =ORION5X_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =ORION5X_REGS_PHYS_BASE + ldr \rv, =ORION5X_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index dfbb68df7b09..4be9aa08de69 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -379,8 +379,6 @@ static void __init kurobox_pro_init(void) #ifdef CONFIG_MACH_KUROBOX_PRO MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, @@ -393,8 +391,6 @@ MACHINE_END #ifdef CONFIG_MACH_LINKSTATION_PRO MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = kurobox_pro_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index 8e569be6e2c7..437364b7168e 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -265,8 +265,6 @@ static void __init ls_hgl_init(void) MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL") /* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = ls_hgl_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index c704f056de1e..ab9b0cf0a90b 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -267,8 +267,6 @@ static void __init lsmini_init(void) #ifdef CONFIG_MACH_LINKSTATION_MINI MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini") /* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = lsmini_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 61c086b66723..2f0e16cd7e81 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -261,8 +261,6 @@ static void __init mss2_init(void) MACHINE_START(MSS2, "Maxtor Shared Storage II") /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = mss2_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index 97c9ccb2ac60..b3d90f25de9f 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -229,8 +229,6 @@ static void __init mv2120_init(void) /* Warning: HP uses a wrong mach-type (=526) in their bootloader */ MACHINE_START(MV2120, "HP Media Vault mv2120") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = mv2120_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index 7bd6283476f9..d6665b31665f 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -419,8 +419,6 @@ static void __init net2big_init(void) /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ MACHINE_START(NET2BIG, "LaCie 2Big Network") - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = net2big_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 9c1ca41730ba..f4c26fd731f4 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -169,8 +169,6 @@ subsys_initcall(rd88f5181l_fxo_pci_init); MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design") /* Maintainer: Nicolas Pitre <nico@marvell.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = rd88f5181l_fxo_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index ee1399ff0ced..b5942909bab0 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -181,8 +181,6 @@ subsys_initcall(rd88f5181l_ge_pci_init); MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = rd88f5181l_ge_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index a04f9e4b633a..165ed87029b2 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -305,8 +305,6 @@ static void __init rd88f5182_init(void) MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = rd88f5182_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index 7737cf9a8f50..02ff45f3e2e3 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -123,8 +123,6 @@ subsys_initcall(rd88f6183ap_ge_pci_init); MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = rd88f6183ap_ge_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 0b101d7d41c2..4403fae5ab0e 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -358,8 +358,6 @@ static void __init tsp2_init(void) MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live") /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = tsp2_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 9d6890514199..1e196129d763 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -322,8 +322,6 @@ static void __init qnap_ts209_init(void) MACHINE_START(TS209, "QNAP TS-109/TS-209") /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = qnap_ts209_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index d85588ac7ef8..428af2046e36 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -311,8 +311,6 @@ static void __init qnap_ts409_init(void) MACHINE_START(TS409, "QNAP TS-409") /* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = qnap_ts409_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 696b1a97f9e2..16f1bd5324be 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -550,8 +550,6 @@ static void __init ts78xx_init(void) MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") /* Maintainer: Alexander Clouter <alex@digriz.org.uk> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = ts78xx_init, .map_io = ts78xx_map_io, diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 69208217b220..7994d6ec08a8 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -172,8 +172,6 @@ subsys_initcall(wnr854t_pci_init); MACHINE_START(WNR854T, "Netgear WNR854T") /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = wnr854t_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index f9f222ebb7ed..a5989b7eb53e 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -260,8 +260,6 @@ subsys_initcall(wrt350n_v2_pci_init); MACHINE_START(WRT350N_V2, "Linksys WRT350N v2") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .phys_io = ORION5X_REGS_PHYS_BASE, - .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = wrt350n_v2_init, .map_io = orion5x_map_io, diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c index 45734bb880a8..63399755f199 100644 --- a/arch/arm/mach-pnx4008/core.c +++ b/arch/arm/mach-pnx4008/core.c @@ -264,8 +264,6 @@ extern struct sys_timer pnx4008_timer; MACHINE_START(PNX4008, "Philips PNX4008") /* Maintainer: MontaVista Software Inc. */ - .phys_io = 0x40090000, - .io_pg_offst = (0xf4090000 >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = pnx4008_map_io, .init_irq = pnx4008_init_irq, diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S index 6ca8bd30bf46..931afebaf064 100644 --- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S +++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S @@ -11,12 +11,10 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - mov \rx, #0x00090000 - addeq \rx, \rx, #0x40000000 - addne \rx, \rx, #0xf4000000 + .macro addruart, rp, rv + mov \rp, #0x00090000 + add \rv, \rp, #0xf4000000 @ virtual + add \rp, \rp, #0x40000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h index 2ad398378aed..31b65ee07b0b 100644 --- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h +++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * The vmalloc() routines leaves a hole of 4kB between each vmalloced * area for the same reason. ;) */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 7aefb9074852..dd235ecc9d6c 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -8,19 +8,16 @@ config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform (aka Lubbock)" select PXA25x select SA1111 - select PXA_HAVE_BOARD_IRQS config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_ZYLONITE bool select PXA3xx select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_ZYLONITE300 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" @@ -44,6 +41,10 @@ config MACH_TAVOREVB select PXA3xx select CPU_PXA930 +config MACH_TAVOREVB3 + bool "PXA95x Development Platform (aka TavorEVB III)" + select CPU_PXA950 + config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx @@ -61,7 +62,6 @@ config ARCH_VIPER select ISA select I2C_GPIO select HAVE_PWM - select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS select ARCOM_PCMCIA @@ -69,7 +69,6 @@ config MACH_ARCOM_ZEUS bool "Arcom/Eurotech ZEUS SBC" select PXA27x select ISA - select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS select ARCOM_PCMCIA @@ -77,7 +76,6 @@ config MACH_BALLOON3 bool "Balloon 3 board" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_CSB726 bool "Enable Cogent CSB726 System On a Module" @@ -140,13 +138,11 @@ config MACH_INTELMOTE2 bool "Intel Mote 2 Platform" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_STARGATE2 bool "Intel Stargate 2 Platform" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_XCEP bool "Iskratel Electronics XCEP" @@ -206,13 +202,11 @@ config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" @@ -247,7 +241,6 @@ config MACH_COLIBRI_PXA270_INCOME depends on MACH_COLIBRI select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" @@ -274,7 +267,6 @@ config MACH_H4700 select PXA27x select IWMMXT select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_H5000 bool "HP iPAQ h5000" @@ -289,7 +281,6 @@ config MACH_MAGICIAN select PXA27x select IWMMXT select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_MIOA701 bool "Mitac Mio A701 Support" @@ -307,7 +298,6 @@ config PXA_EZX select PXA27x select IWMMXT select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_EZX_A780 bool "Motorola EZX A780" @@ -478,7 +468,6 @@ config MACH_POODLE depends on PXA_SHARPSL select PXA25x select SHARP_LOCOMO - select PXA_HAVE_BOARD_IRQS config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" @@ -523,7 +512,6 @@ config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" depends on PXA_SHARPSL select PXA25x - select PXA_HAVE_BOARD_IRQS config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" @@ -552,7 +540,6 @@ config MACH_ICONTROL config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x - select PXA_HAVE_BOARD_IRQS config MACH_E330 bool "Toshiba e330" @@ -606,7 +593,6 @@ config MACH_ZIPIT2 bool "Zipit Z2 Handheld" select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS endmenu @@ -643,6 +629,7 @@ config CPU_PXA300 config CPU_PXA310 bool select CPU_PXA300 + select PXA310_ULPI if USB_ULPI help PXA310 (codename Monahans-LV) @@ -692,10 +679,10 @@ config SHARPSL_PM_MAX1111 select HWMON select SENSORS_MAX1111 -config PXA_HAVE_BOARD_IRQS +config PXA_HAVE_ISA_IRQS bool -config PXA_HAVE_ISA_IRQS +config PXA310_ULPI bool endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 85c7fb324dbb..e2f89c2c6f49 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -18,7 +18,7 @@ endif # SoC-specific code obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o -obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o +obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA930) += pxa930.o @@ -32,6 +32,7 @@ obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o obj-$(CONFIG_MACH_LITTLETON) += littleton.o obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o +obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o obj-$(CONFIG_MACH_SAAR) += saar.o # 3rd Party Dev Platforms diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 9041340fee1d..21e188901935 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -68,42 +68,6 @@ static unsigned long balloon3_pin_config[] __initdata = { /* Reset, configured as GPIO wakeup source */ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, - - /* LEDs */ - GPIO9_GPIO, /* NAND activity LED */ - GPIO10_GPIO, /* Heartbeat LED */ - - /* AC97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - GPIO113_AC97_nRESET, - GPIO95_GPIO, - - /* MMC */ - GPIO32_MMC_CLK, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - GPIO112_MMC_CMD, - - /* USB Host */ - GPIO88_USBH1_PWR, - GPIO89_USBH1_PEN, - - /* PC Card */ - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO85_nPCE_1, - GPIO54_nPCE_2, - GPIO79_PSKTSEL, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, }; /****************************************************************************** @@ -132,6 +96,34 @@ int __init parse_balloon3_features(char *arg) early_param("balloon3_features", parse_balloon3_features); /****************************************************************************** + * Compact Flash slot + ******************************************************************************/ +#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE) +static unsigned long balloon3_cf_pin_config[] __initdata = { + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, +}; + +static void __init balloon3_cf_init(void) +{ + if (!balloon3_has(BALLOON3_FEATURE_CF)) + return; + + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config)); +} +#else +static inline void balloon3_cf_init(void) {} +#endif + +/****************************************************************************** * NOR Flash ******************************************************************************/ #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) @@ -179,6 +171,15 @@ static inline void balloon3_nor_init(void) {} ******************************************************************************/ #if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) +static unsigned long balloon3_ac97_pin_config[] __initdata = { + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO113_AC97_nRESET, + GPIO95_GPIO, +}; + static struct ucb1400_pdata vpac270_ucb1400_pdata = { .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ), }; @@ -197,6 +198,7 @@ static void __init balloon3_ts_init(void) if (!balloon3_has(BALLOON3_FEATURE_AUDIO)) return; + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config)); pxa_set_ac97_info(NULL); platform_device_register(&balloon3_ucb1400_device); } @@ -208,6 +210,11 @@ static inline void balloon3_ts_init(void) {} * Framebuffer ******************************************************************************/ #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static unsigned long balloon3_lcd_pin_config[] __initdata = { + GPIOxx_LCD_TFT_16BPP, + GPIO99_GPIO, +}; + static struct pxafb_mode_info balloon3_lcd_modes[] = { { .pixclock = 38000, @@ -242,6 +249,8 @@ static void __init balloon3_lcd_init(void) if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY)) return; + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config)); + ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON"); if (ret) { pr_err("Requesting BKL-ON GPIO failed!\n"); @@ -271,6 +280,15 @@ static inline void balloon3_lcd_init(void) {} * SD/MMC card controller ******************************************************************************/ #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static unsigned long balloon3_mmc_pin_config[] __initdata = { + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, +}; + static struct pxamci_platform_data balloon3_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .gpio_card_detect = -1, @@ -281,6 +299,7 @@ static struct pxamci_platform_data balloon3_mci_platform_data = { static void __init balloon3_mmc_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config)); pxa_set_mci_info(&balloon3_mci_platform_data); } #else @@ -339,6 +358,11 @@ static inline void balloon3_irda_init(void) {} * USB Host ******************************************************************************/ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static unsigned long balloon3_uhc_pin_config[] __initdata = { + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, +}; + static struct pxaohci_platform_data balloon3_ohci_info = { .port_mode = PMM_PERPORT_MODE, .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, @@ -348,6 +372,7 @@ static void __init balloon3_uhc_init(void) { if (!balloon3_has(BALLOON3_FEATURE_OHCI)) return; + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config)); pxa_set_ohci_info(&balloon3_ohci_info); } #else @@ -358,6 +383,11 @@ static inline void balloon3_uhc_init(void) {} * LEDs ******************************************************************************/ #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static unsigned long balloon3_led_pin_config[] __initdata = { + GPIO9_GPIO, /* NAND activity LED */ + GPIO10_GPIO, /* Heartbeat LED */ +}; + struct gpio_led balloon3_gpio_leds[] = { { .name = "balloon3:green:idle", @@ -436,6 +466,7 @@ static struct platform_device balloon3_pcf_leds = { static void __init balloon3_leds_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config)); platform_device_register(&balloon3_leds); platform_device_register(&balloon3_pcf_leds); } @@ -757,6 +788,7 @@ static void __init balloon3_init(void) balloon3_ts_init(); balloon3_udc_init(); balloon3_uhc_init(); + balloon3_cf_init(); } static struct map_desc balloon3_io_desc[] __initdata = { @@ -776,9 +808,8 @@ static void __init balloon3_map_io(void) MACHINE_START(BALLOON3, "Balloon3") /* Maintainer: Nick Bane. */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = balloon3_map_io, + .nr_irqs = BALLOON3_NR_IRQS, .init_irq = balloon3_init_irq, .timer = &pxa_timer, .init_machine = balloon3_init, diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index aae544631a8b..4bd7a3cda48c 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -148,9 +148,7 @@ static void __init capc7117_init(void) MACHINE_START(CAPC7117, "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM") - .phys_io = 0x40000000, .boot_params = 0xa0000100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa3xx_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index bff6e78f033d..ac5598ce9724 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -33,6 +33,9 @@ extern void cmx255_init(void); extern void cmx270_init(void); +/* reserve IRQs for IT8152 */ +#define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40) + /* virtual addresses for statically mapped regions */ #define CMX2XX_VIRT_BASE (0xe8000000) #define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE) @@ -511,9 +514,8 @@ static void __init cmx2xx_map_io(void) MACHINE_START(ARMCORE, "Compulab CM-X2XX") .boot_params = 0xa0000100, - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = cmx2xx_map_io, + .nr_irqs = CMX2XX_NR_IRQS, .init_irq = cmx2xx_init_irq, .timer = &pxa_timer, .init_machine = cmx2xx_init, diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index c70e6c2f4e7c..922b1075b9de 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <linux/gpio.h> #include <linux/dm9000.h> @@ -50,6 +51,7 @@ #include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <mach/audio.h> +#include <mach/pxa3xx-u2d.h> #include <asm/mach/map.h> @@ -68,6 +70,8 @@ #define GPIO97_RTC_RD (97) #define GPIO98_RTC_IO (98) +#define GPIO_ULPI_PHY_RST (127) + static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = { /* LCD */ GPIO54_LCD_LDD_0, @@ -472,6 +476,78 @@ static void __init cm_x300_init_mmc(void) static inline void cm_x300_init_mmc(void) {} #endif +#if defined(CONFIG_PXA310_ULPI) +static struct clk *pout_clk; + +static int cm_x300_ulpi_phy_reset(void) +{ + int err; + + /* reset the PHY */ + err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset"); + if (err) { + pr_err("%s: failed to request ULPI reset GPIO: %d\n", + __func__, err); + return err; + } + + gpio_direction_output(GPIO_ULPI_PHY_RST, 0); + msleep(10); + gpio_set_value(GPIO_ULPI_PHY_RST, 1); + msleep(10); + + gpio_free(GPIO_ULPI_PHY_RST); + + return 0; +} + +static inline int cm_x300_u2d_init(struct device *dev) +{ + int err = 0; + + if (cpu_is_pxa310()) { + /* CLK_POUT is connected to the ULPI PHY */ + pout_clk = clk_get(NULL, "CLK_POUT"); + if (IS_ERR(pout_clk)) { + err = PTR_ERR(pout_clk); + pr_err("%s: failed to get CLK_POUT: %d\n", + __func__, err); + return err; + } + clk_enable(pout_clk); + + err = cm_x300_ulpi_phy_reset(); + if (err) { + clk_disable(pout_clk); + clk_put(pout_clk); + } + } + + return err; +} + +static void cm_x300_u2d_exit(struct device *dev) +{ + if (cpu_is_pxa310()) { + clk_disable(pout_clk); + clk_put(pout_clk); + } +} + +static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = { + .ulpi_mode = ULPI_SER_6PIN, + .init = cm_x300_u2d_init, + .exit = cm_x300_u2d_exit, +}; + +static void cm_x300_init_u2d(void) +{ + pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data); +} +#else +static inline void cm_x300_init_u2d(void) {} +#endif + #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static int cm_x300_ohci_init(struct device *dev) { @@ -754,6 +830,7 @@ static void __init cm_x300_init(void) cm_x300_init_da9030(); cm_x300_init_dm9000(); cm_x300_init_lcd(); + cm_x300_init_u2d(); cm_x300_init_ohci(); cm_x300_init_mmc(); cm_x300_init_nand(); @@ -779,9 +856,7 @@ static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, } MACHINE_START(CM_X300, "CM-X300 module") - .phys_io = 0x40000000, .boot_params = 0xa0000100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa3xx_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 98673ac6efd0..bc045100ec15 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -207,8 +207,6 @@ static void __init colibri_pxa270_income_init(void) } MACHINE_START(COLIBRI, "Toradex Colibri PXA270") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = COLIBRI_SDRAM_BASE + 0x100, .init_machine = colibri_pxa270_init, .map_io = pxa_map_io, @@ -217,8 +215,6 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") MACHINE_END MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .init_machine = colibri_pxa270_income_init, .map_io = pxa_map_io, diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 40b6ac2de876..a70b256591e6 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -186,8 +186,6 @@ void __init colibri_pxa300_init(void) } MACHINE_START(COLIBRI300, "Toradex Colibri PXA300") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = COLIBRI_SDRAM_BASE + 0x100, .init_machine = colibri_pxa300_init, .map_io = pxa_map_io, diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 99e850d84710..ca5f29e2e9cd 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -255,8 +255,6 @@ void __init colibri_pxa320_init(void) } MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = COLIBRI_SDRAM_BASE + 0x100, .init_machine = colibri_pxa320_init, .map_io = pxa_map_io, diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 3fb0fc099080..821229acabe6 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -720,8 +720,6 @@ static void __init fixup_corgi(struct machine_desc *desc, #ifdef CONFIG_MACH_CORGI MACHINE_START(CORGI, "SHARP Corgi") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = pxa_map_io, .init_irq = pxa25x_init_irq, @@ -732,8 +730,6 @@ MACHINE_END #ifdef CONFIG_MACH_SHEPHERD MACHINE_START(SHEPHERD, "SHARP Shepherd") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = pxa_map_io, .init_irq = pxa25x_init_irq, @@ -744,8 +740,6 @@ MACHINE_END #ifdef CONFIG_MACH_HUSKY MACHINE_START(HUSKY, "SHARP Husky") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = pxa_map_io, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 0a0d0fe99220..88fbec05ec50 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -159,7 +159,7 @@ static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy) static unsigned int pxa3xx_cpufreq_get(unsigned int cpu) { - return get_clk_frequency_khz(0); + return pxa3xx_get_clk_frequency_khz(0); } static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, @@ -212,7 +212,8 @@ static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) policy->cpuinfo.min_freq = 104000; policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000; policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ - policy->cur = policy->min = policy->max = get_clk_frequency_khz(0); + policy->max = pxa3xx_get_clk_frequency_khz(0); + policy->cur = policy->min = policy->max; if (cpu_is_pxa300() || cpu_is_pxa310()) ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs)); diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 91fd4fea6a54..57cacaff194d 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -272,9 +272,7 @@ static void __init csb726_init(void) } MACHINE_START(CSB726, "Cogent CSB726") - .phys_io = 0x40000000, .boot_params = 0xa0000100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .init_machine = csb726_init, diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 65447dc736c2..08b410343870 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -6,11 +6,12 @@ #include <asm/pmu.h> #include <mach/udc.h> +#include <mach/pxa3xx-u2d.h> #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <mach/pxa2xx_spi.h> #include <mach/camera.h> #include <mach/audio.h> @@ -134,6 +135,33 @@ struct platform_device pxa27x_device_udc = { } }; +#ifdef CONFIG_PXA3xx +static struct resource pxa3xx_u2d_resources[] = { + [0] = { + .start = 0x54100000, + .end = 0x54100fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USB2, + .end = IRQ_USB2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa3xx_device_u2d = { + .name = "pxa3xx-u2d", + .id = -1, + .resource = pxa3xx_u2d_resources, + .num_resources = ARRAY_SIZE(pxa3xx_u2d_resources), +}; + +void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info) +{ + pxa_register_device(&pxa3xx_device_u2d, info); +} +#endif /* CONFIG_PXA3xx */ + static struct resource pxafb_resources[] = { [0] = { .start = 0x44000000, diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 50353ea49ba4..715e8bd02e24 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -4,6 +4,7 @@ extern struct platform_device pxa3xx_device_mci2; extern struct platform_device pxa3xx_device_mci3; extern struct platform_device pxa25x_device_udc; extern struct platform_device pxa27x_device_udc; +extern struct platform_device pxa3xx_device_u2d; extern struct platform_device pxa_device_fb; extern struct platform_device pxa_device_ffuart; extern struct platform_device pxa_device_btuart; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 0517c17978f3..ab48bb81b570 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -43,7 +43,7 @@ #include <mach/pxafb.h> #include <mach/ohci.h> #include <mach/mmc.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <plat/i2c.h> #include <mach/camera.h> #include <mach/pxa2xx_spi.h> @@ -1301,8 +1301,6 @@ static void __init em_x270_init(void) MACHINE_START(EM_X270, "Compulab EM-X270") .boot_params = 0xa0000100, - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, @@ -1311,8 +1309,6 @@ MACHINE_END MACHINE_START(EXEDA, "Compulab eXeda") .boot_params = 0xa0000100, - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 349212a1cbd3..b25690ccadc4 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -29,6 +29,7 @@ #include <mach/pxa25x.h> #include <mach/eseries-gpio.h> +#include <mach/eseries-irq.h> #include <mach/audio.h> #include <mach/pxafb.h> #include <mach/udc.h> @@ -179,10 +180,9 @@ static void __init e330_init(void) MACHINE_START(E330, "Toshiba e330") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e330_init, @@ -229,10 +229,9 @@ static void __init e350_init(void) MACHINE_START(E350, "Toshiba e350") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e350_init, @@ -352,10 +351,9 @@ static void __init e400_init(void) MACHINE_START(E400, "Toshiba e400") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e400_init, @@ -541,10 +539,9 @@ static void __init e740_init(void) MACHINE_START(E740, "Toshiba e740") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e740_init, @@ -733,10 +730,9 @@ static void __init e750_init(void) MACHINE_START(E750, "Toshiba e750") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e750_init, @@ -929,10 +925,9 @@ static void __init e800_init(void) MACHINE_START(E800, "Toshiba e800") /* Maintainer: Ian Molton (spyro@f2s.com) */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e800_init, diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 626c82b13970..80a9352d43f3 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -32,12 +32,14 @@ #include <mach/ohci.h> #include <plat/i2c.h> #include <mach/hardware.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <mach/camera.h> #include "devices.h" #include "generic.h" +#define EZX_NR_IRQS (IRQ_BOARD_START + 24) + #define GPIO12_A780_FLIP_LID 12 #define GPIO15_A1200_FLIP_LID 15 #define GPIO15_A910_FLIP_LID 15 @@ -796,10 +798,9 @@ static void __init a780_init(void) } MACHINE_START(EZX_A780, "Motorola EZX A780") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = a780_init, @@ -862,10 +863,9 @@ static void __init e680_init(void) } MACHINE_START(EZX_E680, "Motorola EZX E680") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = e680_init, @@ -928,10 +928,9 @@ static void __init a1200_init(void) } MACHINE_START(EZX_A1200, "Motorola EZX A1200") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = a1200_init, @@ -1120,10 +1119,9 @@ static void __init a910_init(void) } MACHINE_START(EZX_A910, "Motorola EZX A910") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = a910_init, @@ -1186,10 +1184,9 @@ static void __init e6_init(void) } MACHINE_START(EZX_E6, "Motorola EZX E6") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = e6_init, @@ -1226,10 +1223,9 @@ static void __init e2_init(void) } MACHINE_START(EZX_E2, "Motorola EZX E2") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = e2_init, diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index baabb3ce088e..6451e9c3a93f 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -66,8 +66,7 @@ unsigned int get_clk_frequency_khz(int info) return pxa25x_get_clk_frequency_khz(info); else if (cpu_is_pxa27x()) return pxa27x_get_clk_frequency_khz(info); - else - return pxa3xx_get_clk_frequency_khz(info); + return 0; } EXPORT_SYMBOL(get_clk_frequency_khz); @@ -80,8 +79,7 @@ unsigned int get_memclk_frequency_10khz(void) return pxa25x_get_memclk_frequency_10khz(); else if (cpu_is_pxa27x()) return pxa27x_get_memclk_frequency_10khz(); - else - return pxa3xx_get_memclk_frequency_10khz(); + return 0; } EXPORT_SYMBOL(get_memclk_frequency_10khz); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index c6305c5b8a72..4b1ad2769ed7 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -54,11 +54,9 @@ static inline void pxa2xx_clear_reset_status(unsigned int mask) {} #ifdef CONFIG_PXA3xx extern unsigned pxa3xx_get_clk_frequency_khz(int); -extern unsigned pxa3xx_get_memclk_frequency_10khz(void); extern void pxa3xx_clear_reset_status(unsigned int); #else #define pxa3xx_get_clk_frequency_khz(x) (0) -#define pxa3xx_get_memclk_frequency_10khz() (0) static inline void pxa3xx_clear_reset_status(unsigned int mask) {} #endif diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 96c345129135..1e2a9a13aec1 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -224,9 +224,7 @@ static void __init gumstix_init(void) } MACHINE_START(GUMSTIX, "Gumstix") - .phys_io = 0x40000000, .boot_params = 0xa0000100, /* match u-boot bi_boot_params */ - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa25x_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index c1cab0871c99..7057a1f46db4 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -201,8 +201,6 @@ static void __init h5000_init(void) } MACHINE_START(H5400, "HP iPAQ H5000") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index f9a2e4b0f090..01b7f07ebad2 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -159,8 +159,6 @@ static void __init himalaya_init(void) MACHINE_START(HIMALAYA, "HTC Himalaya") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 848c861dd23f..76d93a25bab6 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -870,10 +870,9 @@ static void __init hx4700_init(void) } MACHINE_START(H4700, "HP iPAQ HX4700") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = HX4700_NR_IRQS, .init_irq = pxa27x_init_irq, .init_machine = hx4700_init, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 5ccb0ceff6c4..d51ee3d25e70 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -191,9 +191,7 @@ static void __init icontrol_init(void) } MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") - .phys_io = 0x40000000, .boot_params = 0xa0000100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa3xx_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index bc78c4dc0c66..e773dceeabc6 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -194,8 +194,6 @@ static void __init idp_map_io(void) MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") /* Maintainer: Vibren Technologies */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = idp_map_io, .init_irq = pxa25x_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index eec92e6fd7cf..561562b4360b 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -174,6 +174,8 @@ enum balloon3_features { #define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ) #define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD) +#define BALLOON3_NR_IRQS (IRQ_BOARD_START + 4) + extern int balloon3_has(enum balloon3_features feature); #endif diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S index 01cf81393fe2..7d5c75125d65 100644 --- a/arch/arm/mach-pxa/include/mach/debug-macro.S +++ b/arch/arm/mach-pxa/include/mach/debug-macro.S @@ -13,12 +13,10 @@ #include "hardware.h" - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x40000000 @ physical - movne \rx, #io_p2v(0x40000000) @ virtual - orr \rx, \rx, #0x00100000 + .macro addruart, rp, rv + mov \rp, #0x00100000 + orr \rv, \rp, #io_p2v(0x40000000) @ virtual + orr \rp, \rp, #0x40000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h index f2a93d5e31d3..de292b269c63 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-irq.h +++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h @@ -25,3 +25,4 @@ #define TMIO_SD_IRQ IRQ_TMIO(1) #define TMIO_USB_IRQ IRQ_TMIO(2) +#define ESERIES_NR_IRQS (IRQ_BOARD_START + 16) diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h index 9eaeed1f87f1..37408449ec25 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/include/mach/hx4700.h @@ -17,6 +17,7 @@ #define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) +#define HX4700_NR_IRQS (IRQ_BOARD_START + 70) /* * PXA GPIOs diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index ffc8314520f2..d372caa75dc7 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -117,48 +117,12 @@ /* * The following interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use - * these. There will be 16 IRQs by default. If it is not enough, - * IRQ_BOARD_END is allowed be customized for each board, but keep - * the numbers within sensible limits and in descending order, so - * when multiple config options are selected, the maximum will be - * used. + * these. + * By default, no board IRQ is reserved. It should be finished in + * custom board since sparse IRQ is already enabled. */ #define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) -#if defined(CONFIG_MACH_H4700) -#define IRQ_BOARD_END (IRQ_BOARD_START + 70) -#elif defined(CONFIG_MACH_ZYLONITE) -#define IRQ_BOARD_END (IRQ_BOARD_START + 32) -#elif defined(CONFIG_PXA_EZX) -#define IRQ_BOARD_END (IRQ_BOARD_START + 23) -#else -#define IRQ_BOARD_END (IRQ_BOARD_START + 16) -#endif - -/* - * Figure out the MAX IRQ number. - * - * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. - * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 - * Otherwise, we have the standard IRQs only. - */ -#ifdef CONFIG_SA1111 -#define NR_IRQS (IRQ_BOARD_END + 55) -#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS) -#define NR_IRQS (IRQ_BOARD_END) -#else #define NR_IRQS (IRQ_BOARD_START) -#endif - -/* add IT8152 IRQs beyond BOARD_END */ -#ifdef CONFIG_PCI_HOST_ITE8152 -#define IT8152_LAST_IRQ (IRQ_BOARD_END + 40) - -#if NR_IRQS < (IT8152_LAST_IRQ+1) -#undef NR_IRQS -#define NR_IRQS (IT8152_LAST_IRQ+1) -#endif - -#endif /* CONFIG_PCI_HOST_ITE8152 */ #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h index 6c9b21c51322..2a5726c15e0e 100644 --- a/arch/arm/mach-pxa/include/mach/littleton.h +++ b/arch/arm/mach-pxa/include/mach/littleton.h @@ -10,4 +10,6 @@ #define EXT0_GPIO_BASE (NR_BUILTIN_GPIO) #define EXT0_GPIO(x) (EXT0_GPIO_BASE + (x)) +#define LITTLETON_NR_IRQS (IRQ_BOARD_START + 8) + #endif /* __ASM_ARCH_LITTLETON_H */ diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h index 0e6440c81683..cd070092b6eb 100644 --- a/arch/arm/mach-pxa/include/mach/lpd270.h +++ b/arch/arm/mach-pxa/include/mach/lpd270.h @@ -38,5 +38,6 @@ #define LPD270_USBC_IRQ LPD270_IRQ(2) #define LPD270_ETHERNET_IRQ LPD270_IRQ(3) #define LPD270_AC97_IRQ LPD270_IRQ(4) +#define LPD270_NR_IRQS (IRQ_BOARD_START + 5) #endif diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index a0d4247f08fc..2a086e8373eb 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -45,6 +45,9 @@ #define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ #define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) +#define LUBBOCK_SA1111_IRQ_BASE (IRQ_BOARD_START + 16) +#define LUBBOCK_NR_IRQS (IRQ_BOARD_START + 16 + 55) + #ifndef __ASSEMBLY__ extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set); #endif diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 20ef37d4a9a7..0a2efcf7947c 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -71,6 +71,8 @@ #define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) #define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3) +#define MAGICIAN_NR_IRQS (IRQ_BOARD_START + 8) + /* * CPLD EGPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h index 86e623abd64d..4c2d11cd824d 100644 --- a/arch/arm/mach-pxa/include/mach/mainstone.h +++ b/arch/arm/mach-pxa/include/mach/mainstone.h @@ -134,4 +134,6 @@ #define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) #define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) +#define MAINSTONE_NR_IRQS (IRQ_BOARD_START + 16) + #endif diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h index 0d119d3b9221..04f7c97044f3 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h @@ -69,6 +69,7 @@ #define nBE0_GPIO_60 MFP_CFG(nBE0, AF0) #define nBE1_GPIO_61 MFP_CFG(nBE1, AF0) #define RDY_GPIO_62 MFP_CFG(RDY, AF0) +#define PMIC_INT_GPIO83 MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH) /* Chip Select */ #define DF_nCS0_nCS2 MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH) @@ -92,6 +93,9 @@ #define GPIO63_CI2C_SCL MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH) #define GPIO64_CI2C_SDA MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH) +#define GPIO73_CI2C_SCL MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH) +#define GPIO74_CI2C_SDA MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH) + #define GPIO77_CI2C_SCL MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH) #define GPIO78_CI2C_SDA MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH) @@ -345,6 +349,9 @@ #define GPIO69_UART1_CTS MFP_CFG(GPIO69, AF2) #define GPIO70_UART1_RTS MFP_CFG(GPIO70, AF2) +#define GPIO53_UART1_TXD MFP_CFG(GPIO53, AF2) +#define GPIO54_UART1_RXD MFP_CFG(GPIO54, AF2) + /* UART2 - BTUART */ #define GPIO91_UART2_RXD MFP_CFG(GPIO91, AF1) #define GPIO92_UART2_TXD MFP_CFG(GPIO92, AF1) diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h index 04083263167e..4bac588478a8 100644 --- a/arch/arm/mach-pxa/include/mach/pcm027.h +++ b/arch/arm/mach-pxa/include/mach/pcm027.h @@ -30,6 +30,8 @@ #define PCM027_MMCDET_IRQ PCM027_IRQ(2) #define PCM027_PM_5V_IRQ PCM027_IRQ(3) +#define PCM027_NR_IRQS (IRQ_BOARD_START + 32) + /* I2C RTC */ #define PCM027_RTC_IRQ_GPIO 0 #define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h index 0b3e6d051c64..83d1cfd00fc9 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -85,6 +85,8 @@ #define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12) #define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13) +#define POODLE_NR_IRQS (IRQ_BOARD_START + 4) /* 4 for LoCoMo */ + extern struct platform_device poodle_locomo_device; #endif /* __ASM_ARCH_POODLE_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h new file mode 100644 index 000000000000..9d82cb65ea56 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h @@ -0,0 +1,35 @@ +/* + * PXA3xx U2D header + * + * Copyright (C) 2010 CompuLab Ltd. + * + * Igor Grinberg <grinberg@compulab.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __PXA310_U2D__ +#define __PXA310_U2D__ + +#include <linux/usb/ulpi.h> + +struct pxa3xx_u2d_platform_data { + +#define ULPI_SER_6PIN (1 << 0) +#define ULPI_SER_3PIN (1 << 1) + unsigned int ulpi_mode; + + int (*init)(struct device *); + void (*exit)(struct device *); +}; + + +/* Start PXA3xx U2D host */ +int pxa3xx_u2d_start_hc(struct usb_bus *host); +/* Stop PXA3xx U2D host */ +void pxa3xx_u2d_stop_hc(struct usb_bus *host); + +extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info); + +#endif /* __PXA310_U2D__ */ diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 1bbd1f2e4beb..1272c4b56ceb 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -20,6 +20,7 @@ /* Jacket Scoop */ #define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000) +#define TOSA_NR_IRQS (IRQ_BOARD_START + TC6393XB_NR_IRQS) /* * SCOOP2 internal GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index 6e119976003e..faa408ab7ad7 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -15,6 +15,8 @@ #ifndef _MACH_ZEUS_H #define _MACH_ZEUS_H +#define ZEUS_NR_IRQS (IRQ_BOARD_START + 48) + /* Physical addresses */ #define ZEUS_FLASH_PHYS PXA_CS0_PHYS #define ZEUS_ETH0_PHYS PXA_CS1_PHYS diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h index 9edf645368d6..ea24998b923c 100644 --- a/arch/arm/mach-pxa/include/mach/zylonite.h +++ b/arch/arm/mach-pxa/include/mach/zylonite.h @@ -5,6 +5,8 @@ #define EXT_GPIO(x) (128 + (x)) +#define ZYLONITE_NR_IRQS (IRQ_BOARD_START + 32) + /* the following variables are processor specific and initialized * by the corresponding zylonite_pxa3xx_init() */ diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 9b9046185b00..41aa89e35772 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -43,7 +43,7 @@ #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/pxa2xx_spi.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <mach/littleton.h> #include <plat/i2c.h> #include <plat/pxa3xx_nand.h> @@ -437,10 +437,9 @@ static void __init littleton_init(void) } MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)") - .phys_io = 0x40000000, .boot_params = 0xa0000100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, + .nr_irqs = LITTLETON_NR_IRQS, .init_irq = pxa3xx_init_irq, .timer = &pxa_timer, .init_machine = littleton_init, diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index d279507fc748..623af0232a54 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -505,10 +505,9 @@ static void __init lpd270_map_io(void) MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") /* Maintainer: Peter Barada */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = lpd270_map_io, + .nr_irqs = LPD270_NR_IRQS, .init_irq = lpd270_init_irq, .timer = &pxa_timer, .init_machine = lpd270_init, diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 330c3282856e..1499493cd070 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -229,7 +229,7 @@ static struct resource sa1111_resources[] = { }; static struct sa1111_platform_data sa1111_info = { - .irq_base = IRQ_BOARD_END, + .irq_base = LUBBOCK_SA1111_IRQ_BASE, }; static struct platform_device sa1111_device = { @@ -557,9 +557,8 @@ static void __init lubbock_map_io(void) MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") /* Maintainer: MontaVista Software Inc. */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = lubbock_map_io, + .nr_irqs = LUBBOCK_NR_IRQS, .init_irq = lubbock_init_irq, .timer = &pxa_timer, .init_machine = lubbock_init, diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index e81dd0c8e40d..90663760307a 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -764,10 +764,9 @@ static void __init magician_init(void) MACHINE_START(MAGICIAN, "HTC Magician") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = MAGICIAN_NR_IRQS, .init_irq = pxa27x_init_irq, .init_machine = magician_init, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 5543c64da9ef..a980a5c93e49 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -50,7 +50,7 @@ #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include "generic.h" #include "devices.h" @@ -624,10 +624,9 @@ static void __init mainstone_map_io(void) MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") /* Maintainer: MontaVista Software Inc. */ - .phys_io = 0x40000000, .boot_params = 0xa0000100, /* BLOB boot parameter setting */ - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = mainstone_map_io, + .nr_irqs = MAINSTONE_NR_IRQS, .init_irq = mainstone_init_irq, .timer = &pxa_timer, .init_machine = mainstone_init, diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index dc66942ef9ab..0c31fabfc7fd 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -45,7 +45,7 @@ #include <mach/pxa27x.h> #include <mach/regs-rtc.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/udc.h> @@ -819,8 +819,6 @@ static void mioa701_machine_exit(void) } MACHINE_START(MIOA701, "MIO A701") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = &pxa_map_io, .init_irq = &pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 6d4503927a76..116167aaba68 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -92,9 +92,7 @@ static void __init mp900c_init(void) /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */ MACHINE_START(NEC_MP900, "MobilePro900/C") - .phys_io = 0x40000000, .boot_params = 0xa0220100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .timer = &pxa_timer, .map_io = pxa_map_io, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 91038eeafe44..ce092c521e6d 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -39,7 +39,7 @@ #include <mach/mmc.h> #include <mach/pxafb.h> #include <mach/irda.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <mach/palmasoc.h> #include <mach/palm27x.h> @@ -343,8 +343,6 @@ static void __init palmld_init(void) } MACHINE_START(PALMLD, "Palm LifeDrive") - .phys_io = PALMLD_PHYS_IO_START, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = palmld_map_io, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 1c281995f658..862da812cd10 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -39,7 +39,7 @@ #include <mach/mmc.h> #include <mach/pxafb.h> #include <mach/irda.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <mach/udc.h> #include <mach/palmasoc.h> #include <mach/palm27x.h> @@ -202,8 +202,6 @@ static void __init palmt5_init(void) } MACHINE_START(PALMT5, "Palm Tungsten|T5") - .phys_io = PALMT5_PHYS_IO_START, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, .reserve = palmt5_reserve, diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index ce1104d1bc17..2131d5860919 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -412,9 +412,7 @@ static void __init palmtc_init(void) }; MACHINE_START(PALMTC, "Palm Tungsten|C") - .phys_io = 0x40000000, .boot_params = 0xa0000100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa25x_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 93c11a0438d5..a9dae7bc35d9 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -373,8 +373,6 @@ static void __init palmte2_init(void) } MACHINE_START(PALMTE2, "Palm Tungsten|E2") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 52defd5e42e5..00e2d7ba84ed 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -39,7 +39,7 @@ #include <mach/mmc.h> #include <mach/pxafb.h> #include <mach/irda.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <mach/udc.h> #include <mach/ohci.h> #include <mach/pxa2xx-regs.h> @@ -441,8 +441,6 @@ static void __init centro_init(void) } MACHINE_START(TREO680, "Palm Treo 680") - .phys_io = TREO_PHYS_IO_START, - .io_pg_offst = io_p2v(0x40000000), .boot_params = 0xa0000100, .map_io = pxa_map_io, .reserve = treo_reserve, @@ -452,8 +450,6 @@ MACHINE_START(TREO680, "Palm Treo 680") MACHINE_END MACHINE_START(CENTRO, "Palm Centro 685") - .phys_io = TREO_PHYS_IO_START, - .io_pg_offst = io_p2v(0x40000000), .boot_params = 0xa0000100, .map_io = pxa_map_io, .reserve = treo_reserve, diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 144dc2b6911f..d2060a1d1d68 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -43,7 +43,7 @@ #include <mach/mmc.h> #include <mach/pxafb.h> #include <mach/irda.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <mach/udc.h> #include <mach/palmasoc.h> #include <mach/palm27x.h> @@ -363,8 +363,6 @@ static void __init palmtx_init(void) } MACHINE_START(PALMTX, "Palm T|X") - .phys_io = PALMTX_PHYS_IO_START, - .io_pg_offst = io_p2v(0x40000000), .boot_params = 0xa0000100, .map_io = palmtx_map_io, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 87e4b1044e0b..af6203fbca9c 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -41,7 +41,7 @@ #include <mach/mmc.h> #include <mach/pxafb.h> #include <mach/irda.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <mach/udc.h> #include <mach/palmasoc.h> #include <mach/palm27x.h> @@ -279,8 +279,6 @@ static void __init palmz72_init(void) } MACHINE_START(PALMZ72, "Palm Zire72") - .phys_io = 0x40000000, - .io_pg_offst = io_p2v(0x40000000), .boot_params = 0xa0000100, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 2190af066470..c77e8f30a439 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -259,9 +259,8 @@ static void __init pcm027_map_io(void) MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") /* Maintainer: Pengutronix */ .boot_params = 0xa0000100, - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pcm027_map_io, + .nr_irqs = PCM027_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = pcm027_init, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 55e8fcde0141..93a191c889df 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -465,10 +465,9 @@ static void __init fixup_poodle(struct machine_desc *desc, } MACHINE_START(POODLE, "SHARP Poodle") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_poodle, .map_io = pxa_map_io, + .nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */ .init_irq = pxa25x_init_irq, .timer = &pxa_timer, .init_machine = poodle_init, diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c new file mode 100644 index 000000000000..ce7168b233e2 --- /dev/null +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -0,0 +1,400 @@ +/* + * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c + * + * code specific to pxa3xx aka Monahans + * + * Copyright (C) 2010 CompuLab Ltd. + * + * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il> + * initial version: pxa310 USB Host mode support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/usb.h> +#include <linux/usb/otg.h> + +#include <mach/hardware.h> +#include <mach/regs-u2d.h> +#include <mach/pxa3xx-u2d.h> + +struct pxa3xx_u2d_ulpi { + struct clk *clk; + void __iomem *mmio_base; + + struct otg_transceiver *otg; + unsigned int ulpi_mode; +}; + +static struct pxa3xx_u2d_ulpi *u2d; + +static inline u32 u2d_readl(u32 reg) +{ + return __raw_readl(u2d->mmio_base + reg); +} + +static inline void u2d_writel(u32 reg, u32 val) +{ + __raw_writel(val, u2d->mmio_base + reg); +} + +#if defined(CONFIG_PXA310_ULPI) +enum u2d_ulpi_phy_mode { + SYNCH = 0, + CARKIT = (1 << 0), + SER_3PIN = (1 << 1), + SER_6PIN = (1 << 2), + LOWPOWER = (1 << 3), +}; + +static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void) +{ + return (u2d_readl(U2DOTGUSR) >> 28) & 0xF; +} + +static int pxa310_ulpi_poll(void) +{ + int timeout = 50000; + + while (timeout--) { + if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN)) + return 0; + + cpu_relax(); + } + + pr_warning("%s: ULPI access timed out!\n", __func__); + + return -ETIMEDOUT; +} + +static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg) +{ + int err; + + if (pxa310_ulpi_get_phymode() != SYNCH) { + pr_warning("%s: PHY is not in SYNCH mode!\n", __func__); + return -EBUSY; + } + + u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16)); + msleep(5); + + err = pxa310_ulpi_poll(); + if (err) + return err; + + return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA; +} + +static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg) +{ + if (pxa310_ulpi_get_phymode() != SYNCH) { + pr_warning("%s: PHY is not in SYNCH mode!\n", __func__); + return -EBUSY; + } + + u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8)); + msleep(5); + + return pxa310_ulpi_poll(); +} + +struct otg_io_access_ops pxa310_ulpi_access_ops = { + .read = pxa310_ulpi_read, + .write = pxa310_ulpi_write, +}; + +static void pxa310_otg_transceiver_rtsm(void) +{ + u32 u2dotgcr; + + /* put PHY to sync mode */ + u2dotgcr = u2d_readl(U2DOTGCR); + u2dotgcr |= U2DOTGCR_RTSM | U2DOTGCR_UTMID; + u2d_writel(U2DOTGCR, u2dotgcr); + msleep(10); + + /* setup OTG sync mode */ + u2dotgcr = u2d_readl(U2DOTGCR); + u2dotgcr |= U2DOTGCR_ULAF; + u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF); + u2d_writel(U2DOTGCR, u2dotgcr); +} + +static int pxa310_start_otg_host_transcvr(struct usb_bus *host) +{ + int err; + + pxa310_otg_transceiver_rtsm(); + + err = otg_init(u2d->otg); + if (err) { + pr_err("OTG transceiver init failed"); + return err; + } + + err = otg_set_vbus(u2d->otg, 1); + if (err) { + pr_err("OTG transceiver VBUS set failed"); + return err; + } + + err = otg_set_host(u2d->otg, host); + if (err) + pr_err("OTG transceiver Host mode set failed"); + + return err; +} + +static int pxa310_start_otg_hc(struct usb_bus *host) +{ + u32 u2dotgcr; + int err; + + /* disable USB device controller */ + u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE); + u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID); + u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F); + + err = pxa310_start_otg_host_transcvr(host); + if (err) + return err; + + /* set xceiver mode */ + if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL) + u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS); + else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL) + u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS); + + /* start OTG host controller */ + u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF; + u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF)); + + return 0; +} + +static void pxa310_stop_otg_hc(void) +{ + pxa310_otg_transceiver_rtsm(); + + otg_set_host(u2d->otg, NULL); + otg_set_vbus(u2d->otg, 0); + otg_shutdown(u2d->otg); +} + +static void pxa310_u2d_setup_otg_hc(void) +{ + u32 u2dotgcr; + + u2dotgcr = u2d_readl(U2DOTGCR); + u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID; + u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF); + u2d_writel(U2DOTGCR, u2dotgcr); + msleep(5); + u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE); + msleep(5); + u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F); +} + +static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata) +{ + unsigned int ulpi_mode = ULPI_OTG_DRVVBUS; + + if (pdata) { + if (pdata->ulpi_mode & ULPI_SER_6PIN) + ulpi_mode |= ULPI_IC_6PIN_SERIAL; + else if (pdata->ulpi_mode & ULPI_SER_3PIN) + ulpi_mode |= ULPI_IC_3PIN_SERIAL; + } + + u2d->ulpi_mode = ulpi_mode; + + u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode); + if (!u2d->otg) + return -ENOMEM; + + u2d->otg->io_priv = u2d->mmio_base; + + return 0; +} + +static void pxa310_otg_exit(void) +{ + kfree(u2d->otg); +} +#else +static inline void pxa310_u2d_setup_otg_hc(void) {} +static inline int pxa310_start_otg_hc(struct usb_bus *host) +{ + return 0; +} +static inline void pxa310_stop_otg_hc(void) {} +static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata) +{ + return 0; +} +static inline void pxa310_otg_exit(void) {} +#endif /* CONFIG_PXA310_ULPI */ + +int pxa3xx_u2d_start_hc(struct usb_bus *host) +{ + int err = 0; + + /* In case the PXA3xx ULPI isn't used, do nothing. */ + if (!u2d) + return 0; + + clk_enable(u2d->clk); + + if (cpu_is_pxa310()) { + pxa310_u2d_setup_otg_hc(); + err = pxa310_start_otg_hc(host); + } + + return err; +} + +void pxa3xx_u2d_stop_hc(struct usb_bus *host) +{ + /* In case the PXA3xx ULPI isn't used, do nothing. */ + if (!u2d) + return; + + if (cpu_is_pxa310()) + pxa310_stop_otg_hc(); + + clk_disable(u2d->clk); +} + +static int pxa3xx_u2d_probe(struct platform_device *pdev) +{ + struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data; + struct resource *r; + int err; + + u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL); + if (!u2d) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + u2d->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(u2d->clk)) { + dev_err(&pdev->dev, "failed to get u2d clock\n"); + err = PTR_ERR(u2d->clk); + goto err_free_mem; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no IO memory resource defined\n"); + err = -ENODEV; + goto err_put_clk; + } + + r = request_mem_region(r->start, resource_size(r), pdev->name); + if (!r) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + err = -EBUSY; + goto err_put_clk; + } + + u2d->mmio_base = ioremap(r->start, resource_size(r)); + if (!u2d->mmio_base) { + dev_err(&pdev->dev, "ioremap() failed\n"); + err = -ENODEV; + goto err_free_res; + } + + if (pdata->init) { + err = pdata->init(&pdev->dev); + if (err) + goto err_free_io; + } + + /* Only PXA310 U2D has OTG functionality */ + if (cpu_is_pxa310()) { + err = pxa310_otg_init(pdata); + if (err) + goto err_free_plat; + } + + platform_set_drvdata(pdev, &u2d); + + return 0; + +err_free_plat: + if (pdata->exit) + pdata->exit(&pdev->dev); +err_free_io: + iounmap(u2d->mmio_base); +err_free_res: + release_mem_region(r->start, resource_size(r)); +err_put_clk: + clk_put(u2d->clk); +err_free_mem: + kfree(u2d); + return err; +} + +static int pxa3xx_u2d_remove(struct platform_device *pdev) +{ + struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data; + struct resource *r; + + if (cpu_is_pxa310()) { + pxa310_stop_otg_hc(); + pxa310_otg_exit(); + } + + if (pdata->exit) + pdata->exit(&pdev->dev); + + platform_set_drvdata(pdev, NULL); + iounmap(u2d->mmio_base); + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(r->start, resource_size(r)); + + clk_put(u2d->clk); + + kfree(u2d); + + return 0; +} + +static struct platform_driver pxa3xx_u2d_ulpi_driver = { + .driver = { + .name = "pxa3xx-u2d", + .owner = THIS_MODULE, + }, + .probe = pxa3xx_u2d_probe, + .remove = pxa3xx_u2d_remove, +}; + +static int pxa3xx_u2d_ulpi_init(void) +{ + return platform_driver_register(&pxa3xx_u2d_ulpi_driver); +} +module_init(pxa3xx_u2d_ulpi_init); + +static void __exit pxa3xx_u2d_ulpi_exit(void) +{ + platform_driver_unregister(&pxa3xx_u2d_ulpi_driver); +} +module_exit(pxa3xx_u2d_ulpi_exit); + +MODULE_DESCRIPTION("PXA3xx U2D ULPI driver"); +MODULE_AUTHOR("Igor Grinberg"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index fa0014847c71..c85c3a7abd31 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -98,23 +98,6 @@ unsigned int pxa3xx_get_clk_frequency_khz(int info) return CLK / 1000; } -/* - * Return the current static memory controller clock frequency - * in units of 10kHz - */ -unsigned int pxa3xx_get_memclk_frequency_10khz(void) -{ - unsigned long acsr; - unsigned int smcfs, clk = 0; - - acsr = ACSR; - - smcfs = (acsr >> 23) & 0x7; - clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK; - - return (clk / 10000); -} - void pxa3xx_clear_reset_status(unsigned int mask) { /* RESET_STATUS_* has a 1:1 mapping with ARSR */ @@ -265,7 +248,7 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL), INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL), INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL), - INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"), + INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL), INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL), INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL), diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index 064292008288..7d29dd3af79d 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -192,7 +192,7 @@ static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = { static int __init pxa930_init(void) { - if (cpu_is_pxa930() || cpu_is_pxa935()) { + if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) { mfp_init_base(io_p2v(MFPR_BASE)); mfp_init_addr(pxa930_mfp_addr_map); } diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 67e04f4e07c1..4121d03ea2c3 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -1083,8 +1083,6 @@ static void __init raumfeld_speaker_init(void) #ifdef CONFIG_MACH_RAUMFELD_RC MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = RAUMFELD_SDRAM_BASE + 0x100, .init_machine = raumfeld_controller_init, .map_io = pxa_map_io, @@ -1095,8 +1093,6 @@ MACHINE_END #ifdef CONFIG_MACH_RAUMFELD_CONNECTOR MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = RAUMFELD_SDRAM_BASE + 0x100, .init_machine = raumfeld_connector_init, .map_io = pxa_map_io, @@ -1107,8 +1103,6 @@ MACHINE_END #ifdef CONFIG_MACH_RAUMFELD_SPEAKER MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = RAUMFELD_SDRAM_BASE + 0x100, .init_machine = raumfeld_speaker_init, .map_io = pxa_map_io, diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 115b6f234bdd..4b521e045d75 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -596,9 +596,7 @@ static void __init saar_init(void) MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)") /* Maintainer: Eric Miao <eric.miao@marvell.com> */ - .phys_io = 0x40000000, .boot_params = 0xa0000100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa3xx_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 1cd99cb87bb1..f736119f1ebf 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -979,8 +979,6 @@ static void __init spitz_fixup(struct machine_desc *desc, #ifdef CONFIG_MACH_SPITZ MACHINE_START(SPITZ, "SHARP Spitz") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = spitz_fixup, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, @@ -991,8 +989,6 @@ MACHINE_END #ifdef CONFIG_MACH_BORZOI MACHINE_START(BORZOI, "SHARP Borzoi") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = spitz_fixup, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, @@ -1003,8 +999,6 @@ MACHINE_END #ifdef CONFIG_MACH_AKITA MACHINE_START(AKITA, "SHARP Akita") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = spitz_fixup, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index a654d1e6b38a..738adc1773fd 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -56,6 +56,8 @@ #include "devices.h" #include "generic.h" +#define STARGATE_NR_IRQS (IRQ_BOARD_START + 8) + /* Bluetooth */ #define SG2_BT_RESET 81 @@ -996,8 +998,6 @@ static void __init stargate2_init(void) #ifdef CONFIG_MACH_INTELMOTE2 MACHINE_START(INTELMOTE2, "IMOTE 2") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, @@ -1008,9 +1008,8 @@ MACHINE_END #ifdef CONFIG_MACH_STARGATE2 MACHINE_START(STARGATE2, "Stargate 2") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, + .nr_irqs = STARGATE_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = stargate2_init, diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index f02dcb5b4e97..2ea7545273ad 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -25,7 +25,7 @@ #include <mach/pxa930.h> #include <mach/pxafb.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include "devices.h" #include "generic.h" @@ -489,9 +489,7 @@ static void __init tavorevb_init(void) MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)") /* Maintainer: Eric Miao <eric.miao@marvell.com> */ - .phys_io = 0x40000000, .boot_params = 0xa0000100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa3xx_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c new file mode 100644 index 000000000000..dc3011697bbf --- /dev/null +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -0,0 +1,135 @@ +/* + * linux/arch/arm/mach-pxa/tavorevb3.c + * + * Support for the Marvell EVB3 Development Platform. + * + * Copyright: (C) Copyright 2008-2010 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/mfd/88pm860x.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pxa930.h> + +#include <plat/i2c.h> + +#include "devices.h" +#include "generic.h" + +#define TAVOREVB3_NR_IRQS (IRQ_BOARD_START + 24) + +static mfp_cfg_t evb3_mfp_cfg[] __initdata = { + /* UART */ + GPIO53_UART1_TXD, + GPIO54_UART1_RXD, + + /* PMIC */ + PMIC_INT_GPIO83, +}; + +#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) +static struct pm860x_touch_pdata evb3_touch = { + .gpadc_prebias = 1, + .slot_cycle = 1, + .tsi_prebias = 6, + .pen_prebias = 16, + .pen_prechg = 2, + .res_x = 300, +}; + +static struct pm860x_backlight_pdata evb3_backlight[] = { + { + .id = PM8606_ID_BACKLIGHT, + .iset = PM8606_WLED_CURRENT(24), + .flags = PM8606_BACKLIGHT1, + }, + {}, +}; + +static struct pm860x_led_pdata evb3_led[] = { + { + .id = PM8606_ID_LED, + .iset = PM8606_LED_CURRENT(12), + .flags = PM8606_LED1_RED, + }, { + .id = PM8606_ID_LED, + .iset = PM8606_LED_CURRENT(12), + .flags = PM8606_LED1_GREEN, + }, { + .id = PM8606_ID_LED, + .iset = PM8606_LED_CURRENT(12), + .flags = PM8606_LED1_BLUE, + }, { + .id = PM8606_ID_LED, + .iset = PM8606_LED_CURRENT(12), + .flags = PM8606_LED2_RED, + }, { + .id = PM8606_ID_LED, + .iset = PM8606_LED_CURRENT(12), + .flags = PM8606_LED2_GREEN, + }, { + .id = PM8606_ID_LED, + .iset = PM8606_LED_CURRENT(12), + .flags = PM8606_LED2_BLUE, + }, +}; + +static struct pm860x_platform_data evb3_pm8607_info = { + .touch = &evb3_touch, + .backlight = &evb3_backlight[0], + .led = &evb3_led[0], + .companion_addr = 0x10, + .irq_mode = 0, + .irq_base = IRQ_BOARD_START, + + .i2c_port = GI2C_PORT, +}; + +static struct i2c_board_info evb3_i2c_info[] = { + { + .type = "88PM860x", + .addr = 0x34, + .platform_data = &evb3_pm8607_info, + .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)), + }, +}; + +static void __init evb3_init_i2c(void) +{ + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info)); +} +#else +static inline void evb3_init_i2c(void) {} +#endif + +static void __init evb3_init(void) +{ + /* initialize MFP configurations */ + pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg)); + + pxa_set_ffuart_info(NULL); + + evb3_init_i2c(); +} + +MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)") + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .nr_irqs = TAVOREVB3_NR_IRQS, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, + .init_machine = evb3_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 83cc3a18c2e9..0ee1df49606d 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -952,10 +952,9 @@ static void __init fixup_tosa(struct machine_desc *desc, } MACHINE_START(TOSA, "SHARP Tosa") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_tosa, .map_io = pxa_map_io, + .nr_irqs = TOSA_NR_IRQS, .init_irq = pxa25x_init_irq, .init_machine = tosa_init, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 0acff172ef22..565d062f51d5 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -555,8 +555,6 @@ static void __init trizeps4_map_io(void) MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") /* MAINTAINER("Jürgen Schindele") */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, .init_machine = trizeps4_init, .map_io = trizeps4_map_io, @@ -566,8 +564,6 @@ MACHINE_END MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") /* MAINTAINER("Jürgen Schindele") */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, .init_machine = trizeps4_init, .map_io = trizeps4_map_io, diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index e90114a7e246..438fc9a5ed59 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -992,8 +992,6 @@ static void __init viper_map_io(void) MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC") /* Maintainer: Marc Zyngier <maz@misterjones.org> */ - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = viper_map_io, .init_irq = viper_init_irq, diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 37d6173bbb66..f45ac0961778 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -718,8 +718,6 @@ static void __init vpac270_init(void) } MACHINE_START(VPAC270, "Voipac PXA270") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index d3b4e3f2e033..3260ce73d327 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -181,8 +181,6 @@ static void __init xcep_init(void) } MACHINE_START(XCEP, "Iskratel XCEP") - .phys_io = 0x40000000, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .init_machine = xcep_init, .map_io = pxa_map_io, diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index f0d02288b4ca..fefde9848d82 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -37,7 +37,7 @@ #include <mach/z2.h> #include <mach/pxafb.h> #include <mach/mmc.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <mach/pxa2xx_spi.h> #include <plat/i2c.h> @@ -703,9 +703,7 @@ static void __init z2_init(void) } MACHINE_START(ZIPIT2, "Zipit Z2") - .phys_io = 0x40000000, .boot_params = 0xa0000100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 03b9cb910e08..dea46a2d089b 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -900,10 +900,9 @@ static void __init zeus_map_io(void) MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS") /* Maintainer: Marc Zyngier <maz@misterjones.org> */ - .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc), .boot_params = 0xa0000100, .map_io = zeus_map_io, + .nr_irqs = ZEUS_NR_IRQS, .init_irq = zeus_init_irq, .timer = &pxa_timer, .init_machine = zeus_init, diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index c479cbecf784..f25fb6245bd7 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -30,7 +30,7 @@ #include <mach/zylonite.h> #include <mach/mmc.h> #include <mach/ohci.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> #include <plat/pxa3xx_nand.h> #include "devices.h" @@ -411,10 +411,9 @@ static void __init zylonite_init(void) } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") - .phys_io = 0x40000000, .boot_params = 0xa0000100, - .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, + .nr_irqs = ZYLONITE_NR_IRQS, .init_irq = pxa3xx_init_irq, .timer = &pxa_timer, .init_machine = zylonite_init, diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 2fa38df28414..07c08151dfe6 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -259,6 +259,7 @@ struct mmci_platform_data realview_mmc0_plat_data = { .status = realview_mmc_status, .gpio_wp = 17, .gpio_cd = 16, + .cd_invert = true, }; struct mmci_platform_data realview_mmc1_plat_data = { @@ -266,6 +267,7 @@ struct mmci_platform_data realview_mmc1_plat_data = { .status = realview_mmc_status, .gpio_wp = 19, .gpio_cd = 18, + .cd_invert = true, }; /* diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index 86622289b74e..90b687cbe04e 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -33,12 +33,10 @@ #error "Unknown RealView platform" #endif - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xfb000000 @ virtual base - orr \rx, \rx, #DEBUG_LL_UART_OFFSET + .macro addruart, rp, rv + mov \rp, #DEBUG_LL_UART_OFFSET + orr \rv, \rp, #0xfb000000 @ virtual base + orr \rp, \rp, #0x10000000 @ physical base .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h index dd53892d44a7..d3cd265cb058 100644 --- a/arch/arm/mach-realview/include/mach/smp.h +++ b/arch/arm/mach-realview/include/mach/smp.h @@ -1,16 +1,8 @@ #ifndef ASMARM_ARCH_SMP_H #define ASMARM_ARCH_SMP_H - #include <asm/hardware/gic.h> - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) +#include <asm/smp_mpidr.h> /* * We use IRQ1 as the IPI diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 991c1f8390e2..f2697106f809 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -486,8 +486,6 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_EB_UART0_BASE & SECTION_MASK, - .io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_eb_map_io, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index d2be12eb829e..a4125619d71b 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -378,8 +378,6 @@ static void __init realview_pb1176_init(void) MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PB1176_UART0_BASE & SECTION_MASK, - .io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index d591bc00b86e..117b95b2ca15 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -381,8 +381,6 @@ static void __init realview_pb11mp_init(void) MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PB11MP_UART0_BASE & SECTION_MASK, - .io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 6c37621217bc..929b8dc12e81 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -331,8 +331,6 @@ static void __init realview_pba8_init(void) MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PBA8_UART0_BASE & SECTION_MASK, - .io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pba8_map_io, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 9428eff0b116..b9f9e20031a7 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -417,8 +417,6 @@ static void __init realview_pbx_init(void) MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PBX_UART0_BASE & SECTION_MASK, - .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S index 6fc8d66395dc..85effffdc2b2 100644 --- a/arch/arm/mach-rpc/include/mach/debug-macro.S +++ b/arch/arm/mach-rpc/include/mach/debug-macro.S @@ -11,13 +11,11 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x03000000 - movne \rx, #0xe0000000 - orr \rx, \rx, #0x00010000 - orr \rx, \rx, #0x00000fe0 + .macro addruart, rp, rv + mov \rp, #0x00010000 + orr \rp, \rp, #0x00000fe0 + orr \rv, \rp, #0xe0000000 @ virtual + orr \rp, \rp, #0x03000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h index 9a96fd69e705..3bcd86fadb81 100644 --- a/arch/arm/mach-rpc/include/mach/vmalloc.h +++ b/arch/arm/mach-rpc/include/mach/vmalloc.h @@ -7,4 +7,4 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#define VMALLOC_END (PAGE_OFFSET + 0x1c000000) +#define VMALLOC_END 0xdc000000 diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index c7fc01e9d1f6..580b3c73d2c7 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -218,8 +218,6 @@ extern struct sys_timer ioc_timer; MACHINE_START(RISCPC, "Acorn-RiscPC") /* Maintainer: Russell King */ - .phys_io = 0x03000000, - .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, .boot_params = 0x10000100, .reserve_lp0 = 1, .reserve_lp1 = 1, diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S index 0eef78b4a6ed..5882deaa56be 100644 --- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S @@ -19,13 +19,12 @@ #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C24XX_PA_UART - ldrne \rx, = S3C24XX_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C24XX_PA_UART + ldr \rv, = S3C24XX_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 34fc05a4244b..44440cbd7620 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -241,8 +241,6 @@ static void __init amlm5900_init(void) } MACHINE_START(AML_M5900, "AML_M5900") - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = amlm5900_map_io, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index c1f90f6fab42..2970ea9f7c2b 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -664,8 +664,6 @@ static void __init bast_init(void) MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = bast_map_io, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 3ba3bab139d0..98c5c9e81ee9 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -350,8 +350,6 @@ static void __init h1940_init(void) MACHINE_START(H1940, "IPAQ-H1940") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = h1940_map_io, .reserve = h1940_reserve, diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 41f299d983eb..271b9aa6d40a 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -605,8 +605,6 @@ MACHINE_START(N30, "Acer-N30") /* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .timer = &s3c24xx_timer, .init_machine = n30_init, @@ -617,8 +615,6 @@ MACHINE_END MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .timer = &s3c24xx_timer, .init_machine = n30_init, diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index d8c7f2efc1a7..0aa16cd5acbc 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -116,8 +116,6 @@ static void __init otom11_init(void) MACHINE_START(OTOM, "Nex Vision - Otom 1.1") /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = otom11_map_io, .init_machine = otom11_init, diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index d0e87b6e2e0f..e8f49feef28c 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -362,8 +362,6 @@ static void __init qt2410_machine_init(void) } MACHINE_START(QT2410, "QT2410") - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = qt2410_map_io, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 452223042201..e17f03387aba 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -111,8 +111,6 @@ static void __init smdk2410_init(void) MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch * to SMDK2410 */ /* Maintainer: Jonas Dietsche */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = smdk2410_map_io, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index 929164a8e9b1..a15d0621c22f 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -152,8 +152,6 @@ static void __init tct_hammer_init(void) } MACHINE_START(TCT_HAMMER, "TCT_HAMMER") - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = tct_hammer_map_io, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index d540d79dd264..6ccce5a761b4 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -400,8 +400,6 @@ static void __init vr1000_init(void) MACHINE_START(VR1000, "Thorcom-VR1000") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = vr1000_map_io, .init_machine = vr1000_init, diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 478f4b4606c2..923e01bdf017 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -675,8 +675,6 @@ static void __init jive_machine_init(void) MACHINE_START(JIVE, "JIVE") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 054c9f92232a..8e5758bdd666 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -150,8 +150,6 @@ static void __init smdk2413_machine_init(void) MACHINE_START(S3C2413, "S3C2413") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .fixup = smdk2413_fixup, @@ -163,8 +161,6 @@ MACHINE_END MACHINE_START(SMDK2412, "SMDK2412") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .fixup = smdk2413_fixup, @@ -176,8 +172,6 @@ MACHINE_END MACHINE_START(SMDK2413, "SMDK2413") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .fixup = smdk2413_fixup, diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index f291ac25d312..83544ebe20ac 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -156,8 +156,6 @@ static void __init vstms_init(void) } MACHINE_START(VSTMS, "VSTMS") - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .fixup = vstms_fixup, diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c index 5fc3f67ef265..7fc366476d7e 100644 --- a/arch/arm/mach-s3c2416/mach-smdk2416.c +++ b/arch/arm/mach-s3c2416/mach-smdk2416.c @@ -195,8 +195,6 @@ static void __init smdk2416_machine_init(void) MACHINE_START(SMDK2416, "SMDK2416") /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index b73f78a9da5c..d7086788b1ff 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -498,8 +498,6 @@ static void __init anubis_init(void) MACHINE_START(ANUBIS, "Simtec-Anubis") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = anubis_map_io, .init_machine = anubis_init, diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index 84725791e6bf..e3810c86a5e6 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -233,8 +233,6 @@ static void __init at2440evb_init(void) MACHINE_START(AT2440EVB, "AT2440EVB") - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = at2440evb_map_io, .init_machine = at2440evb_init, diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index deaabe86741d..9f2c14ec7181 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -572,8 +572,6 @@ static void __init gta02_machine_init(void) MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = gta02_map_io, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index a76bcda210ad..f62bb4c793bd 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -691,8 +691,6 @@ static void __init mini2440_init(void) MACHINE_START(MINI2440, "MINI2440") /* Maintainer: Michel Pollet <buserror@gmail.com> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = mini2440_map_io, .init_machine = mini2440_init, diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 3ff62de45fde..37dd306fb7dc 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -151,8 +151,6 @@ static void __init nexcoder_init(void) MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = nexcoder_map_io, .init_machine = nexcoder_init, diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 319458da71a0..14dc67897757 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -455,8 +455,6 @@ static void __init osiris_init(void) MACHINE_START(OSIRIS, "Simtec-OSIRIS") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = osiris_map_io, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 142d1f921176..32019bd9db3b 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -580,8 +580,6 @@ static void __init rx1950_reserve(void) MACHINE_START(RX1950, "HP iPAQ RX1950") /* Maintainers: Vasily Khoruzhick */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = rx1950_map_io, .reserve = rx1950_reserve, diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 6bb44f75a9ce..1472b1a5b2fb 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -218,8 +218,6 @@ static void __init rx3715_init_machine(void) MACHINE_START(RX3715, "IPAQ-RX3715") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = rx3715_map_io, .reserve = rx3715_reserve, diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index df83276d85ae..eedfe0f11643 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -175,8 +175,6 @@ static void __init smdk2440_machine_init(void) MACHINE_START(S3C2440, "SMDK2440") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index 4c863d3a52f4..4337f0a9960d 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -132,8 +132,6 @@ static void __init smdk2443_machine_init(void) MACHINE_START(SMDK2443, "SMDK2443") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .phys_io = S3C2410_PA_UART, - .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .init_irq = s3c24xx_init_irq, diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S index 239476b81f3b..0c5a73805560 100644 --- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S @@ -10,13 +10,12 @@ #include <mach/map.h> #include <plat/regs-serial.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C24XX_PA_UART - ldrne \rx, = S3C24XX_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C24XX_PA_UART + ldr \rv, = S3C24XX_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index f9ab5d26052a..a29e70550c70 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -21,13 +21,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 742dc87bd9c1..a53cf149476e 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -233,8 +233,6 @@ static void __init anw6410_machine_init(void) MACHINE_START(ANW6410, "A&W6410") /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100, .init_irq = s3c6410_init_irq, diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index fba90229f0df..b2639582caca 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -265,8 +265,6 @@ static void __init hmt_machine_init(void) MACHINE_START(HMT, "Airgoo-HMT") /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100, .init_irq = s3c6410_init_irq, .map_io = hmt_map_io, diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index bf65747ea68e..c4986498cd12 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -97,8 +97,6 @@ static void __init ncp_machine_init(void) MACHINE_START(NCP, "NCP") /* Maintainer: Samsung Electronics */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100, .init_irq = s3c6410_init_irq, .map_io = ncp_map_io, diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index e130379ba0e8..4b4475da8ec6 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -141,8 +141,6 @@ static void __init real6410_machine_init(void) MACHINE_START(REAL6410, "REAL6410") /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100, .init_irq = s3c6410_init_irq, diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 3a9639bc3d9b..cb1ebeb08763 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -136,7 +136,7 @@ static struct platform_device smartq_usb_otg_vbus_dev = { .dev.platform_data = &smartq_usb_otg_vbus_pdata, }; -static int __init smartq_bl_init(struct device *dev) +static int smartq_bl_init(struct device *dev) { s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index a4d59b076e3d..3a3e5acde523 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -32,7 +32,7 @@ #include "mach-smartq.h" -static struct gpio_led smartq5_leds[] __initdata = { +static struct gpio_led smartq5_leds[] = { { .name = "smartq5:green", .active_low = 1, @@ -146,8 +146,6 @@ static void __init smartq5_machine_init(void) MACHINE_START(SMARTQ5, "SmartQ 5") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100, .init_irq = s3c6410_init_irq, .map_io = smartq_map_io, diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index e50a7d781732..e65375877d53 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -32,7 +32,7 @@ #include "mach-smartq.h" -static struct gpio_led smartq7_leds[] __initdata = { +static struct gpio_led smartq7_leds[] = { { .name = "smartq7:red", .active_low = 1, @@ -162,8 +162,6 @@ static void __init smartq7_machine_init(void) MACHINE_START(SMARTQ7, "SmartQ 7") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100, .init_irq = s3c6410_init_irq, .map_io = smartq_map_io, diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 59916676d8d2..3cca642f1e6d 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -85,8 +85,6 @@ static void __init smdk6400_machine_init(void) MACHINE_START(SMDK6400, "SMDK6400") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100, .init_irq = s3c6400_init_irq, diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index d498219fff1b..ec8865c03a19 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -704,8 +704,6 @@ static void __init smdk6410_machine_init(void) MACHINE_START(SMDK6410, "SMDK6410") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100, .init_irq = s3c6410_init_irq, diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig deleted file mode 100644 index 6a4af7f57584..000000000000 --- a/arch/arm/mach-s5p6440/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -# arch/arm/mach-s5p6440/Kconfig -# -# Copyright (c) 2009 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -if ARCH_S5P6440 - -config CPU_S5P6440 - bool - select S3C_PL330_DMA - help - Enable S5P6440 CPU support - -config S5P6440_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config MACH_SMDK6440 - bool "SMDK6440" - select CPU_S5P6440 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_WDT - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - select S5P6440_SETUP_I2C1 - help - Machine support for the Samsung SMDK6440 - -endif diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile deleted file mode 100644 index c3fe4d3662a9..000000000000 --- a/arch/arm/mach-s5p6440/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# arch/arm/mach-s5p6440/Makefile -# -# Copyright (c) 2009 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5P6440 system - -obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o dma.o -obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o - -# machine support - -obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o - -# device support -obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o -obj-$(CONFIG_S5P6440_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c deleted file mode 100644 index ca6e48dce777..000000000000 --- a/arch/arm/mach-s5p6440/clock.c +++ /dev/null @@ -1,846 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/clock.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/sysdev.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/cpu-freq.h> -#include <mach/regs-clock.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/clock-clksrc.h> -#include <plat/s5p-clock.h> -#include <plat/pll.h> -#include <plat/s5p6440.h> - -/* APLL Mux output clock */ -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -static int s5p6440_epll_enable(struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; - - if (enable) - __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); - else - __raw_writel(epll_con, S5P_EPLL_CON); - - return 0; -} - -static unsigned long s5p6440_epll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static u32 epll_div[][5] = { - { 36000000, 0, 48, 1, 4 }, - { 48000000, 0, 32, 1, 3 }, - { 60000000, 0, 40, 1, 3 }, - { 72000000, 0, 48, 1, 3 }, - { 84000000, 0, 28, 1, 2 }, - { 96000000, 0, 32, 1, 2 }, - { 32768000, 45264, 43, 1, 4 }, - { 45158000, 6903, 30, 1, 3 }, - { 49152000, 50332, 32, 1, 3 }, - { 67738000, 10398, 45, 1, 3 }, - { 73728000, 9961, 49, 1, 3 } -}; - -static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con, epll_con_k; - unsigned int i; - - if (clk->rate == rate) /* Return if nothing changed */ - return 0; - - epll_con = __raw_readl(S5P_EPLL_CON); - epll_con_k = __raw_readl(S5P_EPLL_CON_K); - - epll_con_k &= ~(PLL90XX_KDIV_MASK); - epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); - epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | - (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | - (epll_div[i][4] << PLL90XX_SDIV_SHIFT); - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); - return -EINVAL; - } - - __raw_writel(epll_con, S5P_EPLL_CON); - __raw_writel(epll_con_k, S5P_EPLL_CON_K); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops s5p6440_epll_ops = { - .get_rate = s5p6440_epll_get_rate, - .set_rate = s5p6440_epll_set_rate, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 }, -}; - -enum perf_level { - L0 = 532*1000, - L1 = 266*1000, - L2 = 133*1000, -}; - -static const u32 clock_table[][3] = { - /*{ARM_CLK, DIVarm, DIVhclk}*/ - {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)}, - {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)}, - {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)}, -}; - -static unsigned long s5p6440_armclk_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv; - - /* divisor mask starts at bit0, so no need to shift */ - clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; - - return rate / (clkdiv + 1); -} - -static unsigned long s5p6440_armclk_round_rate(struct clk *clk, - unsigned long rate) -{ - u32 iter; - - for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (rate > clock_table[iter][0]) - return clock_table[iter-1][0]; - } - - return clock_table[ARRAY_SIZE(clock_table) - 1][0]; -} - -static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate) -{ - u32 round_tmp; - u32 iter; - u32 clk_div0_tmp; - u32 cur_rate = clk->ops->get_rate(clk); - unsigned long flags; - - round_tmp = clk->ops->round_rate(clk, rate); - if (round_tmp == cur_rate) - return 0; - - - for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (round_tmp == clock_table[iter][0]) - break; - } - - if (iter >= ARRAY_SIZE(clock_table)) - iter = ARRAY_SIZE(clock_table) - 1; - - local_irq_save(flags); - if (cur_rate > round_tmp) { - /* Frequency Down */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - - } else { - /* Frequency Up */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - } - local_irq_restore(flags); - - clk->rate = clock_table[iter][0]; - - return 0; -} - -static struct clk_ops s5p6440_clkarm_ops = { - .get_rate = s5p6440_armclk_get_rate, - .set_rate = s5p6440_armclk_set_rate, - .round_rate = s5p6440_armclk_round_rate, -}; - -static struct clksrc_clk clk_armclk = { - .clk = { - .name = "armclk", - .id = 1, - .parent = &clk_mout_apll.clk, - .ops = &s5p6440_clkarm_ops, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mpll = { - .clk = { - .name = "dout_mpll", - .id = -1, - .parent = &clk_mout_mpll.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_hclk = { - .clk = { - .name = "clk_hclk", - .id = -1, - .parent = &clk_armclk.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk = { - .clk = { - .name = "clk_pclk", - .id = -1, - .parent = &clk_hclk.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 4 }, -}; - -static struct clk *clkset_hclklow_list[] = { - &clk_mout_apll.clk, - &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clkset_hclklow = { - .sources = clkset_hclklow_list, - .nr_sources = ARRAY_SIZE(clkset_hclklow_list), -}; - -static struct clksrc_clk clk_hclk_low = { - .clk = { - .name = "hclk_low", - .id = -1, - }, - .sources = &clkset_hclklow, - .reg_src = { .reg = S5P_SYS_OTHERS, .shift = 6, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_low = { - .clk = { - .name = "pclk_low", - .id = -1, - .parent = &clk_hclk_low.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 }, -}; - -int s5p6440_clk48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S5P_OTHERS); - if (enable) - val |= S5P_OTHERS_USB_SIG_MASK; - else - val &= ~S5P_OTHERS_USB_SIG_MASK; - - __raw_writel(val, S5P_OTHERS); - - local_irq_restore(flags); - - return 0; -} - -static int s5p6440_pclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable); -} - -static int s5p6440_hclk0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable); -} - -static int s5p6440_hclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable); -} - -static int s5p6440_sclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable); -} - -static int s5p6440_sclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_SCLK1, clk, enable); -} - -static int s5p6440_mem_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable); -} - -/* - * The following clocks will be disabled during clock initialization. It is - * recommended to keep the following clocks disabled until the driver requests - * for enabling the clock. - */ -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_mem_ctrl, - .ctrlbit = S5P_CLKCON_MEM0_HCLK_NFCON, - }, { - .name = "adc", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_TSADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_IIC0, - }, { - .name = "i2s_v40", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_IIS2, - }, { - .name = "spi", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_SPI0, - }, { - .name = "spi", - .id = 1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_SPI1, - }, { - .name = "sclk_spi_48", - .id = 0, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_SPI0_48, - }, { - .name = "sclk_spi_48", - .id = 1, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_SPI1_48, - }, { - .name = "mmc_48m", - .id = 0, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC0_48, - }, { - .name = "mmc_48m", - .id = 1, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC1_48, - }, { - .name = "mmc_48m", - .id = 2, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC2_48, - }, { - .name = "otg", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_USB - }, { - .name = "post", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_POST0 - }, { - .name = "lcd", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = S5P_CLKCON_HCLK1_DISPCON, - }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC0, - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC1, - }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC2, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_RTC, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_WDT, - }, { - .name = "timers", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_PWM, - }, { - .name = "hclk_fimgvg", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "tsi", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "pclk_fimgvg", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 31), - }, { - .name = "dmc0", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 30), - }, { - .name = "etm", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 29), - }, { - .name = "dsim", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 28), - }, { - .name = "gps", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "pcm", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "irom", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "dma", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "2d", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 8), - }, -}; - -/* - * The following clocks will be enabled during clock initialization. - */ -static struct clk init_clocks[] = { - { - .name = "gpio", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_GPIO, - }, { - .name = "uart", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART3, - }, { - .name = "mem", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "intc", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 1), - }, -}; - -static struct clk clk_iis_cd_v40 = { - .name = "iis_cdclk_v40", - .id = -1, -}; - -static struct clk clk_pcm_cd = { - .name = "pcm_cdclk", - .id = -1, -}; - -static struct clk *clkset_group1_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, -}; - -static struct clksrc_sources clkset_group1 = { - .sources = clkset_group1_list, - .nr_sources = ARRAY_SIZE(clkset_group1_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_audio_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio = { - .sources = clkset_audio_list, - .nr_sources = ARRAY_SIZE(clkset_audio_list), -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "mmc_bus", - .id = 0, - .ctrlbit = S5P_CLKCON_SCLK0_MMC0, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "mmc_bus", - .id = 1, - .ctrlbit = S5P_CLKCON_SCLK0_MMC1, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "mmc_bus", - .id = 2, - .ctrlbit = S5P_CLKCON_SCLK0_MMC2, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .id = -1, - .ctrlbit = S5P_CLKCON_SCLK0_UART, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "spi_epll", - .id = 0, - .ctrlbit = S5P_CLKCON_SCLK0_SPI0, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "spi_epll", - .id = 1, - .ctrlbit = S5P_CLKCON_SCLK0_SPI1, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_post", - .id = -1, - .ctrlbit = (1 << 10), - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 26, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_dispcon", - .id = -1, - .ctrlbit = (1 << 1), - .enable = s5p6440_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimgvg", - .id = -1, - .ctrlbit = (1 << 2), - .enable = s5p6440_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_audio2", - .id = -1, - .ctrlbit = (1 << 11), - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_audio, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 24, .size = 4 }, - }, -}; - -/* Clock initialisation code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_dout_mpll, - &clk_armclk, - &clk_hclk, - &clk_pclk, - &clk_hclk_low, - &clk_pclk_low, -}; - -void __init_or_cpufreq s5p6440_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk_low; - unsigned long pclk; - unsigned long pclk_low; - unsigned long epll; - unsigned long apll; - unsigned long mpll; - unsigned int ptr; - - /* Set S5P6440 functions for clk_fout_epll */ - clk_fout_epll.enable = s5p6440_epll_enable; - clk_fout_epll.ops = &s5p6440_epll_ops; - - clk_48m.enable = s5p6440_clk48m_ctrl; - - xtal_clk = clk_get(NULL, "ext_xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON), - __raw_readl(S5P_EPLL_CON_K)); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502); - - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_apll.rate = apll; - - printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ - " E=%ld.%ldMHz\n", - print_mhz(apll), print_mhz(mpll), print_mhz(epll)); - - fclk = clk_get_rate(&clk_armclk.clk); - hclk = clk_get_rate(&clk_hclk.clk); - pclk = clk_get_rate(&clk_pclk.clk); - hclk_low = clk_get_rate(&clk_hclk_low.clk); - pclk_low = clk_get_rate(&clk_pclk_low.clk); - - printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ - " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", - print_mhz(hclk), print_mhz(hclk_low), - print_mhz(pclk), print_mhz(pclk_low)); - - clk_f.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -void __init s5p6440_register_clocks(void) -{ - struct clk *clkp; - int ret; - int ptr; - - ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - if (ret > 0) - printk(KERN_ERR "Failed to register %u clocks\n", ret); - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - (clkp->enable)(clkp, 0); - } - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c deleted file mode 100644 index ec592e866054..000000000000 --- a/arch/arm/mach-s5p6440/cpu.c +++ /dev/null @@ -1,117 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/cpu.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/sched.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/proc-fns.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <asm/irq.h> - -#include <plat/regs-serial.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> -#include <plat/s5p6440.h> -#include <plat/adc-core.h> - -static void s5p6440_idle(void) -{ - unsigned long val; - - if (!need_resched()) { - val = __raw_readl(S5P_PWR_CFG); - val &= ~(0x3<<5); - val |= (0x1<<5); - __raw_writel(val, S5P_PWR_CFG); - - cpu_do_idle(); - } - local_irq_enable(); -} - -/* s5p6440_map_io - * - * register the standard cpu IO areas -*/ - -void __init s5p6440_map_io(void) -{ - /* initialize any device information early */ - s3c_adc_setname("s3c64xx-adc"); -} - -void __init s5p6440_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6440_register_clocks(); - s5p6440_setup_clocks(); -} - -void __init s5p6440_init_irq(void) -{ - /* S5P6440 supports only 2 VIC */ - u32 vic[2]; - - /* - * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] - * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] - */ - vic[0] = 0xff800ae7; - vic[1] = 0xffbf23e5; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct sysdev_class s5p6440_sysclass = { - .name = "s5p6440-core", -}; - -static struct sys_device s5p6440_sysdev = { - .cls = &s5p6440_sysclass, -}; - -static int __init s5p6440_core_init(void) -{ - return sysdev_class_register(&s5p6440_sysclass); -} - -core_initcall(s5p6440_core_init); - -int __init s5p6440_init(void) -{ - printk(KERN_INFO "S5P6440: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5p6440_idle; - - return sysdev_register(&s5p6440_sysdev); -} diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c deleted file mode 100644 index 3ca0d2b8275d..000000000000 --- a/arch/arm/mach-s5p6440/dev-audio.c +++ /dev/null @@ -1,127 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <plat/audio.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -static int s5p6440_cfg_i2s(struct platform_device *pdev) -{ - /* configure GPIO for i2s port */ - switch (pdev->id) { - case -1: - s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); - break; - - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_i2s_pdata = { - .cfg_gpio = s5p6440_cfg_i2s, -}; - -static struct resource s5p6440_iis0_resource[] = { - [0] = { - .start = S5P6440_PA_I2S, - .end = S5P6440_PA_I2S + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6440_device_iis = { - .name = "s3c64xx-iis-v4", - .id = -1, - .num_resources = ARRAY_SIZE(s5p6440_iis0_resource), - .resource = s5p6440_iis0_resource, - .dev = { - .platform_data = &s3c_i2s_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5p6440_pcm_cfg_gpio, -}; - -static struct resource s5p6440_pcm0_resource[] = { - [0] = { - .start = S5P6440_PA_PCM, - .end = S5P6440_PA_PCM + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6440_device_pcm = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), - .resource = s5p6440_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c deleted file mode 100644 index 510af44d180c..000000000000 --- a/arch/arm/mach-s5p6440/dev-spi.c +++ /dev/null @@ -1,176 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/spi-clocks.h> - -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> - -static char *spi_src_clks[] = { - [S5P6440_SPI_SRCCLK_PCLK] = "pclk", - [S5P6440_SPI_SRCCLK_SCLK] = "spi_epll", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); - break; - - case 1: - s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct resource s5p6440_spi0_resource[] = { - [0] = { - .start = S5P6440_PA_SPI0, - .end = S5P6440_PA_SPI0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6440_spi0_pdata = { - .cfg_gpio = s5p6440_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p6440_device_spi0 = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6440_spi0_resource), - .resource = s5p6440_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6440_spi0_pdata, - }, -}; - -static struct resource s5p6440_spi1_resource[] = { - [0] = { - .start = S5P6440_PA_SPI1, - .end = S5P6440_PA_SPI1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI1_TX, - .end = DMACH_SPI1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI1_RX, - .end = DMACH_SPI1_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI1, - .end = IRQ_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6440_spi1_pdata = { - .cfg_gpio = s5p6440_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, -}; - -struct platform_device s5p6440_device_spi1 = { - .name = "s3c64xx-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6440_spi1_resource), - .resource = s5p6440_spi1_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6440_spi1_pdata, - }, -}; - -void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5p6440_spi0_pdata; - break; - case 1: - pd = &s5p6440_spi1_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S deleted file mode 100644 index 1347d7f99079..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/debug-macro.S +++ /dev/null @@ -1,37 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <mach/map.h> -#include <plat/regs-serial.h> - - /* note, for the boot process to work we have to keep the UART - * virtual address aligned to an 1MiB boundary for the L1 - * mapping the head code makes. We keep the UART virtual address - * aligned and add in the offset when we load the value here. - */ - - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h deleted file mode 100644 index 21783834f2a2..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/gpio.h +++ /dev/null @@ -1,80 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* GPIO bank sizes */ -#define S5P6440_GPIO_A_NR (6) -#define S5P6440_GPIO_B_NR (7) -#define S5P6440_GPIO_C_NR (8) -#define S5P6440_GPIO_F_NR (2) -#define S5P6440_GPIO_G_NR (7) -#define S5P6440_GPIO_H_NR (10) -#define S5P6440_GPIO_I_NR (16) -#define S5P6440_GPIO_J_NR (12) -#define S5P6440_GPIO_N_NR (16) -#define S5P6440_GPIO_P_NR (8) -#define S5P6440_GPIO_R_NR (15) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ -#define S5P6440_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5P6440_GPIO_A_START = 0, - S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A), - S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B), - S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C), - S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F), - S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G), - S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H), - S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I), - S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J), - S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N), - S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P), -}; - -/* S5P6440 GPIO number definitions. */ -#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) -#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) -#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) -#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) -#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) -#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) -#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) -#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) -#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) -#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) -#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) - -/* the end of the S5P6440 specific gpios */ -#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) -#define S3C_GPIO_END S5P6440_GPIO_END - -/* define the number of gpios we need to the one after the GPR() range */ -#define ARCH_NR_GPIOS (S5P6440_GPR(S5P6440_GPIO_R_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include <asm-generic/gpio.h> - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h deleted file mode 100644 index fa2d69cb1ad7..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s5p6440/include/mach/io.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S3C64XX based - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h deleted file mode 100644 index 6cc5cbc88ffb..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/map.h +++ /dev/null @@ -1,86 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/map.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5P6440_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5P6440_PA_CHIPID - -#define S5P6440_PA_SYSCON (0xE0100000) -#define S5P6440_PA_CLK (S5P6440_PA_SYSCON + 0x0) -#define S5P_PA_SYSCON S5P6440_PA_SYSCON - -#define S5P6440_PA_GPIO (0xE0308000) -#define S5P_PA_GPIO S5P6440_PA_GPIO - -#define S5P6440_PA_VIC0 (0xE4000000) -#define S5P_PA_VIC0 S5P6440_PA_VIC0 - -#define S5P6440_PA_PDMA 0xE9000000 - -#define S5P6440_PA_VIC1 (0xE4100000) -#define S5P_PA_VIC1 S5P6440_PA_VIC1 - -#define S5P6440_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5P6440_PA_TIMER - -#define S5P6440_PA_RTC (0xEA100000) - -#define S5P6440_PA_WDT (0xEA200000) -#define S5P_PA_WDT S5P6440_PA_WDT - -#define S5P6440_PA_UART (0xEC000000) - -#define S5P_PA_UART0 (S5P6440_PA_UART + 0x0) -#define S5P_PA_UART1 (S5P6440_PA_UART + 0x400) -#define S5P_PA_UART2 (S5P6440_PA_UART + 0x800) -#define S5P_PA_UART3 (S5P6440_PA_UART + 0xC00) - -#define S5P_SZ_UART SZ_256 - -#define S5P6440_PA_IIC0 (0xEC104000) -#define S5P6440_PA_IIC1 (0xEC20F000) - -#define S5P6440_PA_SPI0 0xEC400000 -#define S5P6440_PA_SPI1 0xEC500000 - -#define S5P6440_PA_HSOTG (0xED100000) - -#define S5P6440_PA_HSMMC0 (0xED800000) -#define S5P6440_PA_HSMMC1 (0xED900000) -#define S5P6440_PA_HSMMC2 (0xEDA00000) - -#define S5P6440_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5P6440_PA_SDRAM - -/* I2S */ -#define S5P6440_PA_I2S 0xF2000000 - -/* PCM */ -#define S5P6440_PA_PCM 0xF2100000 - -#define S5P6440_PA_ADC (0xF3000000) - -/* compatibiltiy defines. */ -#define S3C_PA_UART S5P6440_PA_UART -#define S3C_PA_IIC S5P6440_PA_IIC0 -#define S3C_PA_RTC S5P6440_PA_RTC -#define S3C_PA_IIC1 S5P6440_PA_IIC1 -#define S3C_PA_WDT S5P6440_PA_WDT - -#define SAMSUNG_PA_ADC S5P6440_PA_ADC - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h deleted file mode 100644 index c783ecc9f193..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/regs-clock.h +++ /dev/null @@ -1,130 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <mach/map.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P_APLL_LOCK S5P_CLKREG(0x00) -#define S5P_MPLL_LOCK S5P_CLKREG(0x04) -#define S5P_EPLL_LOCK S5P_CLKREG(0x08) -#define S5P_APLL_CON S5P_CLKREG(0x0C) -#define S5P_MPLL_CON S5P_CLKREG(0x10) -#define S5P_EPLL_CON S5P_CLKREG(0x14) -#define S5P_EPLL_CON_K S5P_CLKREG(0x18) -#define S5P_CLK_SRC0 S5P_CLKREG(0x1C) -#define S5P_CLK_DIV0 S5P_CLKREG(0x20) -#define S5P_CLK_DIV1 S5P_CLKREG(0x24) -#define S5P_CLK_DIV2 S5P_CLKREG(0x28) -#define S5P_CLK_OUT S5P_CLKREG(0x2C) -#define S5P_CLK_GATE_HCLK0 S5P_CLKREG(0x30) -#define S5P_CLK_GATE_PCLK S5P_CLKREG(0x34) -#define S5P_CLK_GATE_SCLK0 S5P_CLKREG(0x38) -#define S5P_CLK_GATE_MEM0 S5P_CLKREG(0x3C) -#define S5P_CLK_DIV3 S5P_CLKREG(0x40) -#define S5P_CLK_GATE_HCLK1 S5P_CLKREG(0x44) -#define S5P_CLK_GATE_SCLK1 S5P_CLKREG(0x48) -#define S5P_AHB_CON0 S5P_CLKREG(0x100) -#define S5P_CLK_SRC1 S5P_CLKREG(0x10C) -#define S5P_SWRESET S5P_CLKREG(0x114) -#define S5P_SYS_ID S5P_CLKREG(0x118) -#define S5P_SYS_OTHERS S5P_CLKREG(0x11C) -#define S5P_MEM_CFG_STAT S5P_CLKREG(0x12C) -#define S5P_PWR_CFG S5P_CLKREG(0x804) -#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0x808) -#define S5P_NORMAL_CFG S5P_CLKREG(0x810) -#define S5P_STOP_CFG S5P_CLKREG(0x814) -#define S5P_SLEEP_CFG S5P_CLKREG(0x818) -#define S5P_OSC_FREQ S5P_CLKREG(0x820) -#define S5P_OSC_STABLE S5P_CLKREG(0x824) -#define S5P_PWR_STABLE S5P_CLKREG(0x828) -#define S5P_MTC_STABLE S5P_CLKREG(0x830) -#define S5P_OTHERS S5P_CLKREG(0x900) -#define S5P_RST_STAT S5P_CLKREG(0x904) -#define S5P_WAKEUP_STAT S5P_CLKREG(0x908) -#define S5P_SLPEN S5P_CLKREG(0x930) -#define S5P_INFORM0 S5P_CLKREG(0xA00) -#define S5P_INFORM1 S5P_CLKREG(0xA04) -#define S5P_INFORM2 S5P_CLKREG(0xA08) -#define S5P_INFORM3 S5P_CLKREG(0xA0C) - -/* CLKDIV0 */ -#define S5P_CLKDIV0_PCLK_MASK (0xf << 12) -#define S5P_CLKDIV0_PCLK_SHIFT (12) -#define S5P_CLKDIV0_HCLK_MASK (0xf << 8) -#define S5P_CLKDIV0_HCLK_SHIFT (8) -#define S5P_CLKDIV0_MPLL_MASK (0x1 << 4) -#define S5P_CLKDIV0_ARM_MASK (0xf << 0) -#define S5P_CLKDIV0_ARM_SHIFT (0) - -/* CLKDIV3 */ -#define S5P_CLKDIV3_PCLK_LOW_MASK (0xf << 12) -#define S5P_CLKDIV3_PCLK_LOW_SHIFT (12) -#define S5P_CLKDIV3_HCLK_LOW_MASK (0xf << 8) -#define S5P_CLKDIV3_HCLK_LOW_SHIFT (8) - -/* HCLK0 GATE Registers */ -#define S5P_CLKCON_HCLK0_USB (1<<20) -#define S5P_CLKCON_HCLK0_HSMMC2 (1<<19) -#define S5P_CLKCON_HCLK0_HSMMC1 (1<<18) -#define S5P_CLKCON_HCLK0_HSMMC0 (1<<17) -#define S5P_CLKCON_HCLK0_POST0 (1<<5) - -/* HCLK1 GATE Registers */ -#define S5P_CLKCON_HCLK1_DISPCON (1<<1) - -/* PCLK GATE Registers */ -#define S5P_CLKCON_PCLK_IIS2 (1<<26) -#define S5P_CLKCON_PCLK_SPI1 (1<<22) -#define S5P_CLKCON_PCLK_SPI0 (1<<21) -#define S5P_CLKCON_PCLK_GPIO (1<<18) -#define S5P_CLKCON_PCLK_IIC0 (1<<17) -#define S5P_CLKCON_PCLK_TSADC (1<<12) -#define S5P_CLKCON_PCLK_PWM (1<<7) -#define S5P_CLKCON_PCLK_RTC (1<<6) -#define S5P_CLKCON_PCLK_WDT (1<<5) -#define S5P_CLKCON_PCLK_UART3 (1<<4) -#define S5P_CLKCON_PCLK_UART2 (1<<3) -#define S5P_CLKCON_PCLK_UART1 (1<<2) -#define S5P_CLKCON_PCLK_UART0 (1<<1) - -/* SCLK0 GATE Registers */ -#define S5P_CLKCON_SCLK0_MMC2_48 (1<<29) -#define S5P_CLKCON_SCLK0_MMC1_48 (1<<28) -#define S5P_CLKCON_SCLK0_MMC0_48 (1<<27) -#define S5P_CLKCON_SCLK0_MMC2 (1<<26) -#define S5P_CLKCON_SCLK0_MMC1 (1<<25) -#define S5P_CLKCON_SCLK0_MMC0 (1<<24) -#define S5P_CLKCON_SCLK0_SPI1_48 (1<<23) -#define S5P_CLKCON_SCLK0_SPI0_48 (1<<22) -#define S5P_CLKCON_SCLK0_SPI1 (1<<21) -#define S5P_CLKCON_SCLK0_SPI0 (1<<20) -#define S5P_CLKCON_SCLK0_UART (1<<5) - -/* SCLK1 GATE Registers */ - -/* MEM0 GATE Registers */ -#define S5P_CLKCON_MEM0_HCLK_NFCON (1<<2) - -/*OTHERS Resgister */ -#define S5P_OTHERS_USB_SIG_MASK (1<<16) -#define S5P_OTHERS_HCLK_LOW_SEL_MPLL (1<<6) - -/* Compatibility defines */ -#define ARM_CLK_DIV S5P_CLK_DIV0 -#define ARM_DIV_RATIO_SHIFT 0 -#define ARM_DIV_MASK (0xf << ARM_DIV_RATIO_SHIFT) - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h deleted file mode 100644 index 5fbca50d1cfb..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5P6440_PLAT_SPI_CLKS_H -#define __S5P6440_PLAT_SPI_CLKS_H __FILE__ - -#define S5P6440_SPI_SRCCLK_PCLK 0 -#define S5P6440_SPI_SRCCLK_SCLK 1 - -#endif /* __S5P6440_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h deleted file mode 100644 index 7c1f600d65c0..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/uncompress.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/map.h> -#include <plat/uncompress.h> - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c deleted file mode 100644 index a1f3727e4021..000000000000 --- a/arch/arm/mach-s5p6440/init.c +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/init.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Init support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s5p6440.h> -#include <plat/regs-serial.h> - -static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = { - [0] = { - .name = "pclk_low", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "uclk1", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p6440_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c index 70ac681af72b..842af86bda6d 100644 --- a/arch/arm/mach-s5p6442/cpu.c +++ b/arch/arm/mach-s5p6442/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s5p6442/cpu.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -48,10 +48,30 @@ static struct map_desc s5p6442_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P6442_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P6442_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P6442_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, .pfn = __phys_to_pfn(S5P6442_PA_VIC2), .length = SZ_16K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, } }; @@ -63,10 +83,11 @@ static void s5p6442_idle(void) local_irq_enable(); } -/* s5p6442_map_io +/* + * s5p6442_map_io * * register the standard cpu IO areas -*/ + */ void __init s5p6442_map_io(void) { diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S index bb6536147ffb..e2213205d780 100644 --- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S @@ -15,13 +15,12 @@ #include <mach/map.h> #include <plat/regs-serial.h> - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 281d256faafb..31fb2e68d527 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -23,16 +23,10 @@ #define S5P_PA_SYSCON S5P6442_PA_SYSCON #define S5P6442_PA_GPIO (0xE0200000) -#define S5P_PA_GPIO S5P6442_PA_GPIO #define S5P6442_PA_VIC0 (0xE4000000) -#define S5P_PA_VIC0 S5P6442_PA_VIC0 - #define S5P6442_PA_VIC1 (0xE4100000) -#define S5P_PA_VIC1 S5P6442_PA_VIC1 - #define S5P6442_PA_VIC2 (0xE4200000) -#define S5P_PA_VIC2 S5P6442_PA_VIC2 #define S5P6442_PA_MDMA 0xE8000000 #define S5P6442_PA_PDMA 0xE9000000 diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c index 8d8d04272f85..819fd80d00af 100644 --- a/arch/arm/mach-s5p6442/mach-smdk6442.c +++ b/arch/arm/mach-s5p6442/mach-smdk6442.c @@ -83,8 +83,6 @@ static void __init smdk6442_machine_init(void) MACHINE_START(SMDK6442, "SMDK6442") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S5P_PA_SDRAM + 0x100, .init_irq = s5p6442_init_irq, .map_io = smdk6442_map_io, diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig new file mode 100644 index 000000000000..fbcae9352022 --- /dev/null +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -0,0 +1,57 @@ +# arch/arm/mach-s5p64x0/Kconfig +# +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +if ARCH_S5P64X0 + +config CPU_S5P6440 + bool + select PLAT_S5P + select S3C_PL330_DMA + help + Enable S5P6440 CPU support + +config CPU_S5P6450 + bool + select PLAT_S5P + select S3C_PL330_DMA + help + Enable S5P6450 CPU support + +config S5P64X0_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +# machine support + +config MACH_SMDK6440 + bool "SMDK6440" + select CPU_S5P6440 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C64XX_DEV_SPI + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S5P64X0_SETUP_I2C1 + help + Machine support for the Samsung SMDK6440 + +config MACH_SMDK6450 + bool "SMDK6450" + select CPU_S5P6450 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C64XX_DEV_SPI + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S5P64X0_SETUP_I2C1 + help + Machine support for the Samsung SMDK6450 + +endif diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile new file mode 100644 index 000000000000..2655829e6bf8 --- /dev/null +++ b/arch/arm/mach-s5p64x0/Makefile @@ -0,0 +1,30 @@ +# arch/arm/mach-s5p64x0/Makefile +# +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S5P64X0 system + +obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o +obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o +obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o gpio.o +obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o + +# machine support + +obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o +obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o + +# device support + +obj-y += dev-audio.o +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o + +obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot index ff90aa13bd67..ff90aa13bd67 100644 --- a/arch/arm/mach-s5p6440/Makefile.boot +++ b/arch/arm/mach-s5p64x0/Makefile.boot diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c new file mode 100644 index 000000000000..f93dcd8b4d6a --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -0,0 +1,626 @@ +/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P6440 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/s5p64x0-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6440.h> + +static u32 epll_div[][5] = { + { 36000000, 0, 48, 1, 4 }, + { 48000000, 0, 32, 1, 3 }, + { 60000000, 0, 40, 1, 3 }, + { 72000000, 0, 48, 1, 3 }, + { 84000000, 0, 28, 1, 2 }, + { 96000000, 0, 32, 1, 2 }, + { 32768000, 45264, 43, 1, 4 }, + { 45158000, 6903, 30, 1, 3 }, + { 49152000, 50332, 32, 1, 3 }, + { 67738000, 10398, 45, 1, 3 }, + { 73728000, 9961, 49, 1, 3 } +}; + +static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + if (clk->rate == rate) /* Return if nothing changed */ + return 0; + + epll_con = __raw_readl(S5P64X0_EPLL_CON); + epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); + + epll_con_k &= ~(PLL90XX_KDIV_MASK); + epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); + epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | + (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | + (epll_div[i][4] << PLL90XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P64X0_EPLL_CON); + __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5p6440_epll_ops = { + .get_rate = s5p64x0_epll_get_rate, + .set_rate = s5p6440_epll_set_rate, +}; + +static struct clksrc_clk clk_hclk = { + .clk = { + .name = "clk_hclk", + .id = -1, + .parent = &clk_armclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk = { + .clk = { + .name = "clk_pclk", + .id = -1, + .parent = &clk_hclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, +}; +static struct clksrc_clk clk_hclk_low = { + .clk = { + .name = "clk_hclk_low", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_low = { + .clk = { + .name = "clk_pclk_low", + .id = -1, + .parent = &clk_hclk_low.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, +}; + +/* + * The following clocks will be disabled during clock initialization. It is + * recommended to keep the following clocks disabled until the driver requests + * for enabling the clock. + */ +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_mem_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "post", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 5) + }, { + .name = "2d", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "otg", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 20) + }, { + .name = "irom", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "lcd", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "hclk_fimgvg", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "tsi", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "rtc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "timers", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "pcm", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "adc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "spi", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "gps", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "i2s_v40", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 26), + }, { + .name = "dsim", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 28), + }, { + .name = "etm", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 29), + }, { + .name = "dmc0", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 30), + }, { + .name = "pclk_fimgvg", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 31), + }, { + .name = "sclk_spi_48", + .id = 0, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "sclk_spi_48", + .id = 1, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 23), + }, { + .name = "mmc_48m", + .id = 0, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "mmc_48m", + .id = 1, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 28), + }, { + .name = "mmc_48m", + .id = 2, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 29), + }, +}; + +/* + * The following clocks will be enabled during clock initialization. + */ +static struct clk init_clocks[] = { + { + .name = "intc", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "mem", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "dma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "uart", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .id = 2, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .id = 3, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "gpio", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 18), + }, +}; + +static struct clk clk_iis_cd_v40 = { + .name = "iis_cdclk_v40", + .id = -1, +}; + +static struct clk clk_pcm_cd = { + .name = "pcm_cdclk", + .id = -1, +}; + +static struct clk *clkset_group1_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, + &clk_fin_epll, +}; + +static struct clksrc_sources clkset_group1 = { + .sources = clkset_group1_list, + .nr_sources = ARRAY_SIZE(clkset_group1_list), +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clk *clkset_audio_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, + &clk_fin_epll, + &clk_iis_cd_v40, + &clk_pcm_cd, +}; + +static struct clksrc_sources clkset_audio = { + .sources = clkset_audio_list, + .nr_sources = ARRAY_SIZE(clkset_audio_list), +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 0, + .ctrlbit = (1 << 20), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 1, + .ctrlbit = (1 << 21), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_post", + .id = -1, + .ctrlbit = (1 << 10), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_dispcon", + .id = -1, + .ctrlbit = (1 << 1), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimgvg", + .id = -1, + .ctrlbit = (1 << 2), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_audio2", + .id = -1, + .ctrlbit = (1 << 11), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_audio, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 }, + }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *sysclks[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_mout_mpll, + &clk_dout_mpll, + &clk_armclk, + &clk_hclk, + &clk_pclk, + &clk_hclk_low, + &clk_pclk_low, +}; + +void __init_or_cpufreq s5p6440_setup_clocks(void) +{ + struct clk *xtal_clk; + + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk_low; + unsigned long pclk; + unsigned long pclk_low; + + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned int ptr; + + /* Set S5P6440 functions for clk_fout_epll */ + + clk_fout_epll.enable = s5p64x0_epll_enable; + clk_fout_epll.ops = &s5p6440_epll_ops; + + clk_48m.enable = s5p64x0_clk48m_ctrl; + + xtal_clk = clk_get(NULL, "ext_xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), + __raw_readl(S5P64X0_EPLL_CON_K)); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + + printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ + " E=%ld.%ldMHz\n", + print_mhz(apll), print_mhz(mpll), print_mhz(epll)); + + fclk = clk_get_rate(&clk_armclk.clk); + hclk = clk_get_rate(&clk_hclk.clk); + pclk = clk_get_rate(&clk_pclk.clk); + hclk_low = clk_get_rate(&clk_hclk_low.clk); + pclk_low = clk_get_rate(&clk_pclk_low.clk); + + printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ + " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", + print_mhz(hclk), print_mhz(hclk_low), + print_mhz(pclk), print_mhz(pclk_low)); + + clk_f.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_iis_cd_v40, + &clk_pcm_cd, +}; + +void __init s5p6440_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c new file mode 100644 index 000000000000..f9afb05b217c --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -0,0 +1,655 @@ +/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P6450 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/s5p64x0-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6450.h> + +static struct clksrc_clk clk_mout_dpll = { + .clk = { + .name = "mout_dpll", + .id = -1, + }, + .sources = &clk_src_dpll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 }, +}; + +static u32 epll_div[][5] = { + { 133000000, 27307, 55, 2, 2 }, + { 100000000, 43691, 41, 2, 2 }, + { 480000000, 0, 80, 2, 0 }, +}; + +static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + if (clk->rate == rate) /* Return if nothing changed */ + return 0; + + epll_con = __raw_readl(S5P64X0_EPLL_CON); + epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); + + epll_con_k &= ~(PLL90XX_KDIV_MASK); + epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); + epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | + (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | + (epll_div[i][4] << PLL90XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P64X0_EPLL_CON); + __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5p6450_epll_ops = { + .get_rate = s5p64x0_epll_get_rate, + .set_rate = s5p6450_epll_set_rate, +}; + +static struct clksrc_clk clk_dout_epll = { + .clk = { + .name = "dout_epll", + .id = -1, + .parent = &clk_mout_epll.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 }, +}; + +static struct clksrc_clk clk_mout_hclk_sel = { + .clk = { + .name = "mout_hclk_sel", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 }, +}; + +static struct clk *clkset_hclk_list[] = { + &clk_mout_hclk_sel.clk, + &clk_armclk.clk, +}; + +static struct clksrc_sources clkset_hclk = { + .sources = clkset_hclk_list, + .nr_sources = ARRAY_SIZE(clkset_hclk_list), +}; + +static struct clksrc_clk clk_hclk = { + .clk = { + .name = "clk_hclk", + .id = -1, + }, + .sources = &clkset_hclk, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk = { + .clk = { + .name = "clk_pclk", + .id = -1, + .parent = &clk_hclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, +}; +static struct clksrc_clk clk_dout_pwm_ratio0 = { + .clk = { + .name = "clk_dout_pwm_ratio0", + .id = -1, + .parent = &clk_mout_hclk_sel.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_to_wdt_pwm = { + .clk = { + .name = "clk_pclk_to_wdt_pwm", + .id = -1, + .parent = &clk_dout_pwm_ratio0.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 }, +}; + +static struct clksrc_clk clk_hclk_low = { + .clk = { + .name = "clk_hclk_low", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_low = { + .clk = { + .name = "clk_pclk_low", + .id = -1, + .parent = &clk_hclk_low.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, +}; + +/* + * The following clocks will be disabled during clock initialization. It is + * recommended to keep the following clocks disabled until the driver requests + * for enabling the clock. + */ +static struct clk init_clocks_disable[] = { + { + .name = "usbhost", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "usbotg", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "adc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "spi", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "iis", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 26), + }, { + .name = "i2c", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "dmc0", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 30), + } +}; + +/* + * The following clocks will be enabled during clock initialization. + */ +static struct clk init_clocks[] = { + { + .name = "intc", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "mem", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "dma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "uart", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .id = 2, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .id = 3, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "timers", + .id = -1, + .parent = &clk_pclk_to_wdt_pwm.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "gpio", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 18), + }, +}; + +static struct clk *clkset_uart_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clk *clkset_mali_list[] = { + &clk_mout_epll.clk, + &clk_mout_apll.clk, + &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clkset_mali = { + .sources = clkset_mali_list, + .nr_sources = ARRAY_SIZE(clkset_mali_list), +}; + +static struct clk *clkset_group2_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, +}; + +static struct clksrc_sources clkset_group2 = { + .sources = clkset_group2_list, + .nr_sources = ARRAY_SIZE(clkset_group2_list), +}; + +static struct clk *clkset_dispcon_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, + &clk_mout_dpll.clk, +}; + +static struct clksrc_sources clkset_dispcon = { + .sources = clkset_dispcon_list, + .nr_sources = ARRAY_SIZE(clkset_dispcon_list), +}; + +static struct clk *clkset_hsmmc44_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, + &s5p_clk_27m, + &clk_48m, +}; + +static struct clksrc_sources clkset_hsmmc44 = { + .sources = clkset_hsmmc44_list, + .nr_sources = ARRAY_SIZE(clkset_hsmmc44_list), +}; + +static struct clk *clkset_sclk_audio0_list[] = { + [0] = &clk_dout_epll.clk, + [1] = &clk_dout_mpll.clk, + [2] = &clk_ext_xtal_mux, + [3] = NULL, + [4] = NULL, +}; + +static struct clksrc_sources clkset_sclk_audio0 = { + .sources = clkset_sclk_audio0_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list), +}; + +static struct clksrc_clk clk_sclk_audio0 = { + .clk = { + .name = "audio-bus", + .id = -1, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 8), + .parent = &clk_dout_epll.clk, + }, + .sources = &clkset_sclk_audio0, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "sclk_mmc", + .id = 0, + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 1, + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 2, + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 0, + .ctrlbit = (1 << 20), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 1, + .ctrlbit = (1 << 21), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = -1, + .ctrlbit = (1 << 10), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "aclk_mali", + .id = -1, + .ctrlbit = (1 << 2), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_mali, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_2d", + .id = -1, + .ctrlbit = (1 << 12), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_mali, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_usi", + .id = -1, + .ctrlbit = (1 << 7), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_camif", + .id = -1, + .ctrlbit = (1 << 6), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_dispcon", + .id = -1, + .ctrlbit = (1 << 1), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_dispcon, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_hsmmc44", + .id = -1, + .ctrlbit = (1 << 30), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_hsmmc44, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 }, + }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *sysclks[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_dout_epll, + &clk_mout_mpll, + &clk_dout_mpll, + &clk_armclk, + &clk_mout_hclk_sel, + &clk_dout_pwm_ratio0, + &clk_pclk_to_wdt_pwm, + &clk_hclk, + &clk_pclk, + &clk_hclk_low, + &clk_pclk_low, + &clk_sclk_audio0, +}; + +void __init_or_cpufreq s5p6450_setup_clocks(void) +{ + struct clk *xtal_clk; + + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk_low; + unsigned long pclk; + unsigned long pclk_low; + + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned long dpll; + unsigned int ptr; + + /* Set S5P6450 functions for clk_fout_epll */ + + clk_fout_epll.enable = s5p64x0_epll_enable; + clk_fout_epll.ops = &s5p6450_epll_ops; + + clk_48m.enable = s5p64x0_clk48m_ctrl; + + xtal_clk = clk_get(NULL, "ext_xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), + __raw_readl(S5P64X0_EPLL_CON_K)); + dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON), + __raw_readl(S5P6450_DPLL_CON_K), pll_4650c); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_dpll.rate = dpll; + + printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ + " E=%ld.%ldMHz, D=%ld.%ldMHz\n", + print_mhz(apll), print_mhz(mpll), print_mhz(epll), + print_mhz(dpll)); + + fclk = clk_get_rate(&clk_armclk.clk); + hclk = clk_get_rate(&clk_hclk.clk); + pclk = clk_get_rate(&clk_pclk.clk); + hclk_low = clk_get_rate(&clk_hclk_low.clk); + pclk_low = clk_get_rate(&clk_pclk_low.clk); + + printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ + " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", + print_mhz(hclk), print_mhz(hclk_low), + print_mhz(pclk), print_mhz(pclk_low)); + + clk_f.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +void __init s5p6450_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c new file mode 100644 index 000000000000..523ba8039ac2 --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock.c @@ -0,0 +1,253 @@ +/* linux/arch/arm/mach-s5p64x0/clock.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> + +struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 }, +}; + +struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 }, +}; + +struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .sources = &clk_src_epll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 }, +}; + +enum perf_level { + L0 = 532*1000, + L1 = 266*1000, + L2 = 133*1000, +}; + +static const u32 clock_table[][3] = { + /*{ARM_CLK, DIVarm, DIVhclk}*/ + {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, + {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, + {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, +}; + +int s5p64x0_epll_enable(struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + unsigned int epll_con = __raw_readl(S5P64X0_EPLL_CON) & ~ctrlbit; + + if (enable) + __raw_writel(epll_con | ctrlbit, S5P64X0_EPLL_CON); + else + __raw_writel(epll_con, S5P64X0_EPLL_CON); + + return 0; +} + +unsigned long s5p64x0_epll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +unsigned long s5p64x0_armclk_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv; + + /* divisor mask starts at bit0, so no need to shift */ + clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; + + return rate / (clkdiv + 1); +} + +unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate) +{ + u32 iter; + + for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (rate > clock_table[iter][0]) + return clock_table[iter-1][0]; + } + + return clock_table[ARRAY_SIZE(clock_table) - 1][0]; +} + +int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 round_tmp; + u32 iter; + u32 clk_div0_tmp; + u32 cur_rate = clk->ops->get_rate(clk); + unsigned long flags; + + round_tmp = clk->ops->round_rate(clk, rate); + if (round_tmp == cur_rate) + return 0; + + + for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (round_tmp == clock_table[iter][0]) + break; + } + + if (iter >= ARRAY_SIZE(clock_table)) + iter = ARRAY_SIZE(clock_table) - 1; + + local_irq_save(flags); + if (cur_rate > round_tmp) { + /* Frequency Down */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P64X0_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + + } else { + /* Frequency Up */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P64X0_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + } + local_irq_restore(flags); + + clk->rate = clock_table[iter][0]; + + return 0; +} + +struct clk_ops s5p64x0_clkarm_ops = { + .get_rate = s5p64x0_armclk_get_rate, + .set_rate = s5p64x0_armclk_set_rate, + .round_rate = s5p64x0_armclk_round_rate, +}; + +struct clksrc_clk clk_armclk = { + .clk = { + .name = "armclk", + .id = 1, + .parent = &clk_mout_apll.clk, + .ops = &s5p64x0_clkarm_ops, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 }, +}; + +struct clksrc_clk clk_dout_mpll = { + .clk = { + .name = "dout_mpll", + .id = -1, + .parent = &clk_mout_mpll.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 }, +}; + +struct clk *clkset_hclk_low_list[] = { + &clk_mout_apll.clk, + &clk_mout_mpll.clk, +}; + +struct clksrc_sources clkset_hclk_low = { + .sources = clkset_hclk_low_list, + .nr_sources = ARRAY_SIZE(clkset_hclk_low_list), +}; + +int s5p64x0_pclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable); +} + +int s5p64x0_hclk0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable); +} + +int s5p64x0_hclk1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable); +} + +int s5p64x0_sclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable); +} + +int s5p64x0_sclk1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable); +} + +int s5p64x0_mem_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable); +} + +int s5p64x0_clk48m_ctrl(struct clk *clk, int enable) +{ + unsigned long flags; + u32 val; + + /* can't rely on clock lock, this register has other usages */ + local_irq_save(flags); + + val = __raw_readl(S5P64X0_OTHERS); + if (enable) + val |= S5P64X0_OTHERS_USB_SIG_MASK; + else + val &= ~S5P64X0_OTHERS_USB_SIG_MASK; + + __raw_writel(val, S5P64X0_OTHERS); + + local_irq_restore(flags); + + return 0; +} diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c new file mode 100644 index 000000000000..b8d02eb4cf30 --- /dev/null +++ b/arch/arm/mach-s5p64x0/cpu.c @@ -0,0 +1,209 @@ +/* linux/arch/arm/mach-s5p64x0/cpu.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/sched.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/proc-fns.h> +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> +#include <plat/adc-core.h> + +/* Initial IO mappings */ + +static struct map_desc s5p64x0_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P64X0_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P64X0_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P64X0_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc s5p6440_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S5P6440_PA_UART(0)), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc s5p6450_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S5P6450_PA_UART(0)), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART + SZ_512K, + .pfn = __phys_to_pfn(S5P6450_PA_UART(5)), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void s5p64x0_idle(void) +{ + unsigned long val; + + if (!need_resched()) { + val = __raw_readl(S5P64X0_PWR_CFG); + val &= ~(0x3 << 5); + val |= (0x1 << 5); + __raw_writel(val, S5P64X0_PWR_CFG); + + cpu_do_idle(); + } + local_irq_enable(); +} + +/* + * s5p64x0_map_io + * + * register the standard CPU IO areas + */ + +void __init s5p6440_map_io(void) +{ + /* initialize any device information early */ + s3c_adc_setname("s3c64xx-adc"); + + iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); + iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); +} + +void __init s5p6450_map_io(void) +{ + /* initialize any device information early */ + s3c_adc_setname("s3c64xx-adc"); + + iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); + iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6440_iodesc)); +} + +/* + * s5p64x0_init_clocks + * + * register and setup the CPU clocks + */ + +void __init s5p6440_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6440_register_clocks(); + s5p6440_setup_clocks(); +} + +void __init s5p6450_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6450_register_clocks(); + s5p6450_setup_clocks(); +} + +/* + * s5p64x0_init_irq + * + * register the CPU interrupts + */ + +void __init s5p6440_init_irq(void) +{ + /* S5P6440 supports 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] + * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] + */ + vic[0] = 0xff800ae7; + vic[1] = 0xffbf23e5; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +void __init s5p6450_init_irq(void) +{ + /* S5P6450 supports only 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[(13-15), (21-22)] + * VIC1 is missing IRQ VIC1[12, 14, 23] + */ + vic[0] = 0xff9f1fff; + vic[1] = 0xff7fafff; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +struct sysdev_class s5p64x0_sysclass = { + .name = "s5p64x0-core", +}; + +static struct sys_device s5p64x0_sysdev = { + .cls = &s5p64x0_sysclass, +}; + +static int __init s5p64x0_core_init(void) +{ + return sysdev_class_register(&s5p64x0_sysclass); +} +core_initcall(s5p64x0_core_init); + +int __init s5p64x0_init(void) +{ + printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5p64x0_idle; + + return sysdev_register(&s5p64x0_sysdev); +} diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c new file mode 100644 index 000000000000..fa097bd68ca4 --- /dev/null +++ b/arch/arm/mach-s5p64x0/dev-audio.c @@ -0,0 +1,164 @@ +/* linux/arch/arm/mach-s5p64x0/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <plat/gpio-cfg.h> +#include <plat/audio.h> + +#include <mach/map.h> +#include <mach/dma.h> +#include <mach/irqs.h> + +static int s5p6440_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case -1: + s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static int s5p6450_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case -1: + s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s5p6440_i2s_pdata = { + .cfg_gpio = s5p6440_cfg_i2s, +}; + +static struct s3c_audio_pdata s5p6450_i2s_pdata = { + .cfg_gpio = s5p6450_cfg_i2s, +}; + +static struct resource s5p64x0_iis0_resource[] = { + [0] = { + .start = S5P64X0_PA_I2S, + .end = S5P64X0_PA_I2S + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6440_device_iis = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), + .resource = s5p64x0_iis0_resource, + .dev = { + .platform_data = &s5p6440_i2s_pdata, + }, +}; + +struct platform_device s5p6450_device_iis0 = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), + .resource = s5p64x0_iis0_resource, + .dev = { + .platform_data = &s5p6450_i2s_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); + break; + + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s5p6440_pcm_pdata = { + .cfg_gpio = s5p6440_pcm_cfg_gpio, +}; + +static struct resource s5p6440_pcm0_resource[] = { + [0] = { + .start = S5P64X0_PA_PCM, + .end = S5P64X0_PA_PCM + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6440_device_pcm = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), + .resource = s5p6440_pcm0_resource, + .dev = { + .platform_data = &s5p6440_pcm_pdata, + }, +}; diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c new file mode 100644 index 000000000000..5b69ec4c8af3 --- /dev/null +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -0,0 +1,232 @@ +/* linux/arch/arm/mach-s5p64x0/dev-spi.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/irqs.h> +#include <mach/regs-clock.h> +#include <mach/spi-clocks.h> + +#include <plat/s3c64xx-spi.h> +#include <plat/gpio-cfg.h> + +static char *s5p64x0_spi_src_clks[] = { + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", + [S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi", +}; + +/* SPI Controller platform_devices */ + +/* Since we emulate multi-cs capability, we do not touch the CS. + * The emulated CS is toggled by board specific mechanism, as it can + * be either some immediate GPIO or some signal out of some other + * chip in between ... or some yet another way. + * We simply do not assume anything about CS. + */ +static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static int s5p6450_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s5p64x0_spi0_resource[] = { + [0] = { + .start = S5P64X0_PA_SPI0, + .end = S5P64X0_PA_SPI0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI0_TX, + .end = DMACH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI0_RX, + .end = DMACH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5p6440_spi0_pdata = { + .cfg_gpio = s5p6440_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, +}; + +static struct s3c64xx_spi_info s5p6450_spi0_pdata = { + .cfg_gpio = s5p6450_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5p64x0_device_spi0 = { + .name = "s3c64xx-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), + .resource = s5p64x0_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource s5p64x0_spi1_resource[] = { + [0] = { + .start = S5P64X0_PA_SPI1, + .end = S5P64X0_PA_SPI1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI1_TX, + .end = DMACH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI1_RX, + .end = DMACH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5p6440_spi1_pdata = { + .cfg_gpio = s5p6440_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, +}; + +static struct s3c64xx_spi_info s5p6450_spi1_pdata = { + .cfg_gpio = s5p6450_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, +}; + +struct platform_device s5p64x0_device_spi1 = { + .name = "s3c64xx-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), + .resource = s5p64x0_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + unsigned int id; + struct s3c64xx_spi_info *pd; + + id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + if (id == 0x50000) + pd = &s5p6450_spi0_pdata; + else + pd = &s5p6440_spi0_pdata; + + s5p64x0_device_spi0.dev.platform_data = pd; + break; + case 1: + if (id == 0x50000) + pd = &s5p6450_spi1_pdata; + else + pd = &s5p6440_spi1_pdata; + + s5p64x0_device_spi1.dev.platform_data = pd; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = s5p64x0_spi_src_clks[src_clk_nr]; +} diff --git a/arch/arm/mach-s5p6440/dma.c b/arch/arm/mach-s5p64x0/dma.c index 07606ad57519..29a8c2410049 100644 --- a/arch/arm/mach-s5p6440/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-s5p64x0/dma.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -15,26 +19,25 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ +*/ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <plat/devs.h> -#include <plat/irqs.h> - #include <mach/map.h> #include <mach/irqs.h> +#include <mach/regs-clock.h> +#include <plat/devs.h> #include <plat/s3c-pl330-pdata.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5p6440_pdma_resource[] = { +static struct resource s5p64x0_pdma_resource[] = { [0] = { - .start = S5P6440_PA_PDMA, - .end = S5P6440_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, + .start = S5P64X0_PA_PDMA, + .end = S5P64X0_PA_PDMA + SZ_4K, + .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_DMA0, @@ -80,26 +83,67 @@ static struct s3c_pl330_platdata s5p6440_pdma_pdata = { }, }; -static struct platform_device s5p6440_device_pdma = { +static struct s3c_pl330_platdata s5p6450_pdma_pdata = { + .peri = { + [0] = DMACH_UART0_RX, + [1] = DMACH_UART0_TX, + [2] = DMACH_UART1_RX, + [3] = DMACH_UART1_TX, + [4] = DMACH_UART2_RX, + [5] = DMACH_UART2_TX, + [6] = DMACH_UART3_RX, + [7] = DMACH_UART3_TX, + [8] = DMACH_UART4_RX, + [9] = DMACH_UART4_TX, + [10] = DMACH_PCM0_TX, + [11] = DMACH_PCM0_RX, + [12] = DMACH_I2S0_TX, + [13] = DMACH_I2S0_RX, + [14] = DMACH_SPI0_TX, + [15] = DMACH_SPI0_RX, + [16] = DMACH_PCM1_TX, + [17] = DMACH_PCM1_RX, + [18] = DMACH_PCM2_TX, + [19] = DMACH_PCM2_RX, + [20] = DMACH_SPI1_TX, + [21] = DMACH_SPI1_RX, + [22] = DMACH_USI_TX, + [23] = DMACH_USI_RX, + [24] = DMACH_MAX, + [25] = DMACH_I2S1_TX, + [26] = DMACH_I2S1_RX, + [27] = DMACH_I2S2_TX, + [28] = DMACH_I2S2_RX, + [29] = DMACH_PWM, + [30] = DMACH_UART5_RX, + [31] = DMACH_UART5_TX, + }, +}; + +static struct platform_device s5p64x0_device_pdma = { .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6440_pdma_resource), - .resource = s5p6440_pdma_resource, + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), + .resource = s5p64x0_pdma_resource, .dev = { .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6440_pdma_pdata, }, }; -static struct platform_device *s5p6440_dmacs[] __initdata = { - &s5p6440_device_pdma, -}; - -static int __init s5p6440_dma_init(void) +static int __init s5p64x0_dma_init(void) { - platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs)); + unsigned int id; + + id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; + + if (id == 0x50000) + s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; + else + s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; + + platform_device_register(&s5p64x0_device_pdma); return 0; } -arch_initcall(s5p6440_dma_init); +arch_initcall(s5p64x0_dma_init); diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p64x0/gpio.c index 8bf6e0ce51c9..39159dd5a29a 100644 --- a/arch/arm/mach-s5p6440/gpio.c +++ b/arch/arm/mach-s5p64x0/gpio.c @@ -1,14 +1,14 @@ -/* arch/arm/mach-s5p6440/gpio.c +/* linux/arch/arm/mach-s5p64x0/gpio.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - GPIOlib support + * S5P64X0 - GPIOlib support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - */ +*/ #include <linux/kernel.h> #include <linux/irq.h> @@ -22,26 +22,29 @@ #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -/* GPIO bank summary: -* -* Bank GPIOs Style SlpCon ExtInt Group -* A 6 4Bit Yes 1 -* B 7 4Bit Yes 1 -* C 8 4Bit Yes 2 -* F 2 2Bit Yes 4 [1] -* G 7 4Bit Yes 5 -* H 10 4Bit[2] Yes 6 -* I 16 2Bit Yes None -* J 12 2Bit Yes None -* N 16 2Bit No IRQ_EINT -* P 8 2Bit Yes 8 -* R 15 4Bit[2] Yes 8 -* -* [1] BANKF pins 14,15 do not form part of the external interrupt sources -* [2] BANK has two control registers, GPxCON0 and GPxCON1 -*/ +/* To be implemented S5P6450 GPIO */ + +/* + * S5P6440 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * F 2 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 8 2Bit Yes 8 + * R 15 4Bit[2] Yes 8 + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ -static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, +static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, unsigned int offset) { struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); @@ -77,7 +80,7 @@ static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, return 0; } -static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, +static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, unsigned int offset, int value) { struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); @@ -124,12 +127,11 @@ static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, return 0; } -int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, +int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg) { void __iomem *reg = chip->base; unsigned int shift; - unsigned long flags; u32 con; switch (off) { @@ -155,26 +157,22 @@ int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, cfg <<= shift; } - s3c_gpio_lock(chip, flags); - con = __raw_readl(reg); con &= ~(0xf << shift); con |= cfg; __raw_writel(con, reg); - s3c_gpio_unlock(chip, flags); - return 0; } -static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { +static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = { { .cfg_eint = 0, }, { .cfg_eint = 7, }, { .cfg_eint = 3, - .set_config = s5p6440_gpio_setcfg_4bit_rbank, + .set_config = s5p64x0_gpio_setcfg_4bit_rbank, }, { .cfg_eint = 0, .set_config = s3c_gpio_setcfg_s3c24xx, @@ -193,7 +191,7 @@ static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { { .base = S5P6440_GPA_BASE, - .config = &s5p6440_gpio_cfgs[1], + .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPA(0), .ngpio = S5P6440_GPIO_A_NR, @@ -201,7 +199,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { }, }, { .base = S5P6440_GPB_BASE, - .config = &s5p6440_gpio_cfgs[1], + .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPB(0), .ngpio = S5P6440_GPIO_B_NR, @@ -209,7 +207,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { }, }, { .base = S5P6440_GPC_BASE, - .config = &s5p6440_gpio_cfgs[1], + .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPC(0), .ngpio = S5P6440_GPIO_C_NR, @@ -217,7 +215,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { }, }, { .base = S5P6440_GPG_BASE, - .config = &s5p6440_gpio_cfgs[1], + .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPG(0), .ngpio = S5P6440_GPIO_G_NR, @@ -229,7 +227,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { { .base = S5P6440_GPH_BASE + 0x4, - .config = &s5p6440_gpio_cfgs[1], + .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPH(0), .ngpio = S5P6440_GPIO_H_NR, @@ -238,10 +236,10 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { }, }; -static struct s3c_gpio_chip gpio_rbank_4bit2[] = { +static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = { { .base = S5P6440_GPR_BASE + 0x4, - .config = &s5p6440_gpio_cfgs[2], + .config = &s5p64x0_gpio_cfgs[2], .chip = { .base = S5P6440_GPR(0), .ngpio = S5P6440_GPIO_R_NR, @@ -253,7 +251,7 @@ static struct s3c_gpio_chip gpio_rbank_4bit2[] = { static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { { .base = S5P6440_GPF_BASE, - .config = &s5p6440_gpio_cfgs[5], + .config = &s5p64x0_gpio_cfgs[5], .chip = { .base = S5P6440_GPF(0), .ngpio = S5P6440_GPIO_F_NR, @@ -261,7 +259,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { }, }, { .base = S5P6440_GPI_BASE, - .config = &s5p6440_gpio_cfgs[3], + .config = &s5p64x0_gpio_cfgs[3], .chip = { .base = S5P6440_GPI(0), .ngpio = S5P6440_GPIO_I_NR, @@ -269,7 +267,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { }, }, { .base = S5P6440_GPJ_BASE, - .config = &s5p6440_gpio_cfgs[3], + .config = &s5p64x0_gpio_cfgs[3], .chip = { .base = S5P6440_GPJ(0), .ngpio = S5P6440_GPIO_J_NR, @@ -277,7 +275,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { }, }, { .base = S5P6440_GPN_BASE, - .config = &s5p6440_gpio_cfgs[4], + .config = &s5p64x0_gpio_cfgs[4], .chip = { .base = S5P6440_GPN(0), .ngpio = S5P6440_GPIO_N_NR, @@ -285,7 +283,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { }, }, { .base = S5P6440_GPP_BASE, - .config = &s5p6440_gpio_cfgs[5], + .config = &s5p64x0_gpio_cfgs[5], .chip = { .base = S5P6440_GPP(0), .ngpio = S5P6440_GPIO_P_NR, @@ -294,7 +292,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { }, }; -void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) +void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) { for (; nr_chips > 0; nr_chips--, chipcfg++) { if (!chipcfg->set_config) @@ -308,13 +306,13 @@ void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) } } -static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, +static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, int nr_chips) { for (; nr_chips > 0; nr_chips--, chip++) { - chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input; + chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input; chip->chip.direction_output = - s5p6440_gpiolib_rbank_4bit2_output; + s5p64x0_gpiolib_rbank_4bit2_output; s3c_gpiolib_add(chip); } } @@ -324,8 +322,8 @@ static int __init s5p6440_gpiolib_init(void) struct s3c_gpio_chip *chips = s5p6440_gpio_2bit; int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit); - s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs, - ARRAY_SIZE(s5p6440_gpio_cfgs)); + s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs, + ARRAY_SIZE(s5p64x0_gpio_cfgs)); for (; nr_chips > 0; nr_chips--, chips++) s3c_gpiolib_add(chips); @@ -336,8 +334,8 @@ static int __init s5p6440_gpiolib_init(void) samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, ARRAY_SIZE(s5p6440_gpio_4bit2)); - s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2, - ARRAY_SIZE(gpio_rbank_4bit2)); + s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2, + ARRAY_SIZE(s5p6440_gpio_rbank_4bit2)); return 0; } diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S new file mode 100644 index 000000000000..79b04e6a6f8e --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -0,0 +1,33 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <plat/map-base.h> +#include <plat/map-s5p.h> + +#include <plat/regs-serial.h> + + .macro addruart, rp, rv + mov \rp, #0xE0000000 + orr \rp, \rp, #0x00100000 + ldr \rp, [\rp, #0x118 ] + and \rp, \rp, #0xff000 + teq \rp, #0x50000 @@ S5P6450 + ldreq \rp, =0xEC800000 + movne \rp, #0xEC000000 @@ S5P6440 + ldrne \rv, = S3C_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6440/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h index 81209eb1409b..81209eb1409b 100644 --- a/arch/arm/mach-s5p6440/include/mach/dma.h +++ b/arch/arm/mach-s5p64x0/include/mach/dma.h diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S index e65f1b967262..10b62b4f8211 100644 --- a/arch/arm/mach-s5p6440/include/mach/entry-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S +/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * Low-level IRQ helper macros for the Samsung S5P6440 + * Low-level IRQ helper macros for the Samsung S5P64X0 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h new file mode 100644 index 000000000000..5486c8f01f1d --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h @@ -0,0 +1,139 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* GPIO bank sizes */ + +#define S5P6440_GPIO_A_NR (6) +#define S5P6440_GPIO_B_NR (7) +#define S5P6440_GPIO_C_NR (8) +#define S5P6440_GPIO_F_NR (2) +#define S5P6440_GPIO_G_NR (7) +#define S5P6440_GPIO_H_NR (10) +#define S5P6440_GPIO_I_NR (16) +#define S5P6440_GPIO_J_NR (12) +#define S5P6440_GPIO_N_NR (16) +#define S5P6440_GPIO_P_NR (8) +#define S5P6440_GPIO_R_NR (15) + +#define S5P6450_GPIO_A_NR (6) +#define S5P6450_GPIO_B_NR (7) +#define S5P6450_GPIO_C_NR (8) +#define S5P6450_GPIO_D_NR (8) +#define S5P6450_GPIO_F_NR (2) +#define S5P6450_GPIO_G_NR (14) +#define S5P6450_GPIO_H_NR (10) +#define S5P6450_GPIO_I_NR (16) +#define S5P6450_GPIO_J_NR (12) +#define S5P6450_GPIO_K_NR (5) +#define S5P6450_GPIO_N_NR (16) +#define S5P6450_GPIO_P_NR (11) +#define S5P6450_GPIO_Q_NR (14) +#define S5P6450_GPIO_R_NR (15) +#define S5P6450_GPIO_S_NR (8) + +/* GPIO bank numbers */ + +/* CONFIG_S3C_GPIO_SPACE allows the user to select extra + * space for debugging purposes so that any accidental + * change from one gpio bank to another can be caught. +*/ + +#define S5P64X0_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p6440_gpio_number { + S5P6440_GPIO_A_START = 0, + S5P6440_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_A), + S5P6440_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_B), + S5P6440_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_C), + S5P6440_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_F), + S5P6440_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_G), + S5P6440_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_H), + S5P6440_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_I), + S5P6440_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_J), + S5P6440_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_N), + S5P6440_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_P), +}; + +enum s5p6450_gpio_number { + S5P6450_GPIO_A_START = 0, + S5P6450_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_A), + S5P6450_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_B), + S5P6450_GPIO_D_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_C), + S5P6450_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_D), + S5P6450_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_F), + S5P6450_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_G), + S5P6450_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_H), + S5P6450_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_I), + S5P6450_GPIO_K_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_J), + S5P6450_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_K), + S5P6450_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_N), + S5P6450_GPIO_Q_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_P), + S5P6450_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q), + S5P6450_GPIO_S_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_R), +}; + +/* GPIO number definitions */ + +#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) +#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) +#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) +#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) +#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) +#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) +#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) +#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) +#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) +#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) +#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) + +#define S5P6450_GPA(_nr) (S5P6450_GPIO_A_START + (_nr)) +#define S5P6450_GPB(_nr) (S5P6450_GPIO_B_START + (_nr)) +#define S5P6450_GPC(_nr) (S5P6450_GPIO_C_START + (_nr)) +#define S5P6450_GPD(_nr) (S5P6450_GPIO_D_START + (_nr)) +#define S5P6450_GPF(_nr) (S5P6450_GPIO_F_START + (_nr)) +#define S5P6450_GPG(_nr) (S5P6450_GPIO_G_START + (_nr)) +#define S5P6450_GPH(_nr) (S5P6450_GPIO_H_START + (_nr)) +#define S5P6450_GPI(_nr) (S5P6450_GPIO_I_START + (_nr)) +#define S5P6450_GPJ(_nr) (S5P6450_GPIO_J_START + (_nr)) +#define S5P6450_GPK(_nr) (S5P6450_GPIO_K_START + (_nr)) +#define S5P6450_GPN(_nr) (S5P6450_GPIO_N_START + (_nr)) +#define S5P6450_GPP(_nr) (S5P6450_GPIO_P_START + (_nr)) +#define S5P6450_GPQ(_nr) (S5P6450_GPIO_Q_START + (_nr)) +#define S5P6450_GPR(_nr) (S5P6450_GPIO_R_START + (_nr)) +#define S5P6450_GPS(_nr) (S5P6450_GPIO_S_START + (_nr)) + +/* the end of the S5P64X0 specific gpios */ + +#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) +#define S5P6450_GPIO_END (S5P6450_GPS(S5P6450_GPIO_S_NR) + 1) + +#define S5P64X0_GPIO_END (S5P6440_GPIO_END > S5P6450_GPIO_END ? \ + S5P6440_GPIO_END : S5P6450_GPIO_END) + +#define S3C_GPIO_END S5P64X0_GPIO_END + +/* define the number of gpios we need to the one after the last GPIO range */ + +#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h index be8b26e875db..d3e87996dd9a 100644 --- a/arch/arm/mach-s5p6440/include/mach/hardware.h +++ b/arch/arm/mach-s5p64x0/include/mach/hardware.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h +/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Hardware support + * S5P64X0 - Hardware support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/include/mach/i2c.h new file mode 100644 index 000000000000..887d25209e8e --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/i2c.h @@ -0,0 +1,17 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 I2C configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev); +extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev); + +extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev); +extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev); diff --git a/arch/arm/mach-s5p64x0/include/mach/io.h b/arch/arm/mach-s5p64x0/include/mach/io.h new file mode 100644 index 000000000000..a3e095c02fb5 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/io.h @@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/io.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben-linux@fluff.org> + * + * Default IO routines for S5P64X0 based + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h index 16a761270de1..513abffc7604 100644 --- a/arch/arm/mach-s5p6440/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -1,17 +1,17 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h +/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h * - * Copyright 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - IRQ definitions + * S5P64X0 - IRQ definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_S5P_IRQS_H -#define __ASM_ARCH_S5P_IRQS_H __FILE__ +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ #include <plat/irqs.h> @@ -20,10 +20,12 @@ #define IRQ_EINT0_3 S5P_IRQ_VIC0(0) #define IRQ_EINT4_11 S5P_IRQ_VIC0(1) #define IRQ_RTC_TIC S5P_IRQ_VIC0(2) +#define IRQ_IIS1 S5P_IRQ_VIC0(3) /* for only S5P6450 */ +#define IRQ_IIS2 S5P_IRQ_VIC0(4) /* for only S5P6450 */ #define IRQ_IIC1 S5P_IRQ_VIC0(5) #define IRQ_I2SV40 S5P_IRQ_VIC0(6) -#define IRQ_GPS S5P_IRQ_VIC0(7) -#define IRQ_POST0 S5P_IRQ_VIC0(9) +#define IRQ_GPS S5P_IRQ_VIC0(7) /* for only S5P6450 */ + #define IRQ_2D S5P_IRQ_VIC0(11) #define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23) #define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24) @@ -39,22 +41,26 @@ #define IRQ_EINT12_15 S5P_IRQ_VIC1(0) #define IRQ_PCM0 S5P_IRQ_VIC1(2) +#define IRQ_PCM1 S5P_IRQ_VIC1(3) /* for only S5P6450 */ +#define IRQ_PCM2 S5P_IRQ_VIC1(4) /* for only S5P6450 */ #define IRQ_UART0 S5P_IRQ_VIC1(5) #define IRQ_UART1 S5P_IRQ_VIC1(6) #define IRQ_UART2 S5P_IRQ_VIC1(7) #define IRQ_UART3 S5P_IRQ_VIC1(8) #define IRQ_DMA0 S5P_IRQ_VIC1(9) +#define IRQ_UART4 S5P_IRQ_VIC1(10) /* S5P6450 */ +#define IRQ_UART5 S5P_IRQ_VIC1(11) /* S5P6450 */ #define IRQ_NFC S5P_IRQ_VIC1(13) +#define IRQ_USI S5P_IRQ_VIC1(15) /* S5P6450 */ #define IRQ_SPI0 S5P_IRQ_VIC1(16) #define IRQ_SPI1 S5P_IRQ_VIC1(17) +#define IRQ_HSMMC2 S5P_IRQ_VIC1(17) /* Shared */ #define IRQ_IIC S5P_IRQ_VIC1(18) #define IRQ_DISPCON3 S5P_IRQ_VIC1(19) -#define IRQ_FIMGVG S5P_IRQ_VIC1(20) #define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21) -#define IRQ_PMU S5P_IRQ_VIC1(23) +#define IRQ_PMU S5P_IRQ_VIC1(23) /* S5P6440 */ #define IRQ_HSMMC0 S5P_IRQ_VIC1(24) #define IRQ_HSMMC1 S5P_IRQ_VIC1(25) -#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ #define IRQ_OTG S5P_IRQ_VIC1(26) #define IRQ_DSI S5P_IRQ_VIC1(27) #define IRQ_RTC_ALARM S5P_IRQ_VIC1(28) @@ -63,6 +69,24 @@ #define IRQ_TC IRQ_PENDN #define IRQ_ADC S5P_IRQ_VIC1(31) +/* UART interrupts, S5P6450 has 5 UARTs */ +#define IRQ_S5P_UART_BASE4 (96) +#define IRQ_S5P_UART_BASE5 (100) + +#define IRQ_S5P_UART_RX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR4 (IRQ_S5P_UART_BASE4 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR5 (IRQ_S5P_UART_BASE5 + UART_IRQ_ERR) + +/* S3C compatibilty defines */ +#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 +#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 + +/* S5P6450 EINT feature will be added */ + /* * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place @@ -115,4 +139,4 @@ #define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) -#endif /* __ASM_ARCH_S5P_IRQS_H */ +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h new file mode 100644 index 000000000000..31e534156e06 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -0,0 +1,83 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/map.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> +#include <plat/map-s5p.h> + +#define S5P64X0_PA_SDRAM (0x20000000) + +#define S5P64X0_PA_CHIPID (0xE0000000) +#define S5P_PA_CHIPID S5P64X0_PA_CHIPID + +#define S5P64X0_PA_SYSCON (0xE0100000) +#define S5P_PA_SYSCON S5P64X0_PA_SYSCON + +#define S5P64X0_PA_GPIO (0xE0308000) + +#define S5P64X0_PA_VIC0 (0xE4000000) +#define S5P64X0_PA_VIC1 (0xE4100000) + +#define S5P64X0_PA_PDMA (0xE9000000) + +#define S5P64X0_PA_TIMER (0xEA000000) +#define S5P_PA_TIMER S5P64X0_PA_TIMER + +#define S5P64X0_PA_RTC (0xEA100000) + +#define S5P64X0_PA_WDT (0xEA200000) + +#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) +#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) + +#define S5P_PA_UART0 S5P6450_PA_UART(0) +#define S5P_PA_UART1 S5P6450_PA_UART(1) +#define S5P_PA_UART2 S5P6450_PA_UART(2) +#define S5P_PA_UART3 S5P6450_PA_UART(3) +#define S5P_PA_UART4 S5P6450_PA_UART(4) +#define S5P_PA_UART5 S5P6450_PA_UART(5) + +#define S5P_SZ_UART SZ_256 + +#define S5P6440_PA_IIC0 (0xEC104000) +#define S5P6440_PA_IIC1 (0xEC20F000) +#define S5P6450_PA_IIC0 (0xEC100000) +#define S5P6450_PA_IIC1 (0xEC200000) + +#define S5P64X0_PA_SPI0 (0xEC400000) +#define S5P64X0_PA_SPI1 (0xEC500000) + +#define S5P64X0_PA_HSOTG (0xED100000) + +#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) + +#define S5P64X0_PA_I2S (0xF2000000) + +#define S5P64X0_PA_PCM (0xF2100000) + +#define S5P64X0_PA_ADC (0xF3000000) + +/* compatibiltiy defines. */ + +#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2) +#define S3C_PA_IIC S5P6440_PA_IIC0 +#define S3C_PA_IIC1 S5P6440_PA_IIC1 +#define S3C_PA_RTC S5P64X0_PA_RTC +#define S3C_PA_WDT S5P64X0_PA_WDT + +#define SAMSUNG_PA_ADC S5P64X0_PA_ADC + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h index d62910c71b56..1b036b0a24ce 100644 --- a/arch/arm/mach-s5p6440/include/mach/memory.h +++ b/arch/arm/mach-s5p64x0/include/mach/memory.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/memory.h +/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Memory definitions + * S5P64X0 - Memory definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,9 +11,9 @@ */ #ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H __FILE__ -#define PHYS_OFFSET UL(0x20000000) +#define PHYS_OFFSET UL(0x20000000) #define CONSISTENT_DMA_SIZE SZ_8M #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h index 6a2a02fdf12a..19fff8b701c0 100644 --- a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h +++ b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h @@ -1,16 +1,14 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h +/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5P6440 - pwm clock and timer support + * S5P64X0 - pwm clock and timer support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h new file mode 100644 index 000000000000..58e1bc813804 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h @@ -0,0 +1,63 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include <mach/map.h> + +#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) + +#define S5P64X0_APLL_CON S5P_CLKREG(0x0C) +#define S5P64X0_MPLL_CON S5P_CLKREG(0x10) +#define S5P64X0_EPLL_CON S5P_CLKREG(0x14) +#define S5P64X0_EPLL_CON_K S5P_CLKREG(0x18) + +#define S5P64X0_CLK_SRC0 S5P_CLKREG(0x1C) + +#define S5P64X0_CLK_DIV0 S5P_CLKREG(0x20) +#define S5P64X0_CLK_DIV1 S5P_CLKREG(0x24) +#define S5P64X0_CLK_DIV2 S5P_CLKREG(0x28) + +#define S5P64X0_CLK_GATE_HCLK0 S5P_CLKREG(0x30) +#define S5P64X0_CLK_GATE_PCLK S5P_CLKREG(0x34) +#define S5P64X0_CLK_GATE_SCLK0 S5P_CLKREG(0x38) +#define S5P64X0_CLK_GATE_MEM0 S5P_CLKREG(0x3C) + +#define S5P64X0_CLK_DIV3 S5P_CLKREG(0x40) + +#define S5P64X0_CLK_GATE_HCLK1 S5P_CLKREG(0x44) +#define S5P64X0_CLK_GATE_SCLK1 S5P_CLKREG(0x48) + +#define S5P6450_DPLL_CON S5P_CLKREG(0x50) +#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54) + +#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C) + +#define S5P64X0_SYS_ID S5P_CLKREG(0x118) +#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C) + +#define S5P64X0_PWR_CFG S5P_CLKREG(0x804) +#define S5P64X0_OTHERS S5P_CLKREG(0x900) + +#define S5P64X0_CLKDIV0_HCLK_SHIFT (8) +#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT) + +#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16) + +/* Compatibility defines */ + +#define ARM_CLK_DIV S5P64X0_CLK_DIV0 +#define ARM_DIV_RATIO_SHIFT 0 +#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT) + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h index 82ff753913da..85f448e20a8b 100644 --- a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h @@ -1,21 +1,24 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - GPIO register definitions + * S5P64X0 - GPIO register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - */ +*/ #ifndef __ASM_ARCH_REGS_GPIO_H #define __ASM_ARCH_REGS_GPIO_H __FILE__ #include <mach/map.h> +/* Will be implemented S5P6442 GPIOlib */ + /* Base addresses for each of the banks */ + #define S5P6440_GPA_BASE (S5P_VA_GPIO + 0x0000) #define S5P6440_GPB_BASE (S5P_VA_GPIO + 0x0020) #define S5P6440_GPC_BASE (S5P_VA_GPIO + 0x0040) @@ -27,6 +30,7 @@ #define S5P6440_GPN_BASE (S5P_VA_GPIO + 0x0830) #define S5P6440_GPP_BASE (S5P_VA_GPIO + 0x0160) #define S5P6440_GPR_BASE (S5P_VA_GPIO + 0x0290) + #define S5P6440_EINT0CON0 (S5P_VA_GPIO + 0x900) #define S5P6440_EINT0FLTCON0 (S5P_VA_GPIO + 0x910) #define S5P6440_EINT0FLTCON1 (S5P_VA_GPIO + 0x914) @@ -34,19 +38,23 @@ #define S5P6440_EINT0PEND (S5P_VA_GPIO + 0x924) /* for LCD */ + #define S5P6440_SPCON_LCD_SEL_RGB (1 << 0) #define S5P6440_SPCON_LCD_SEL_MASK (3 << 0) -/* These set of macros are not really useful for the - * GPF/GPI/GPJ/GPN/GPP, - * useful for others set of GPIO's (4 bit) +/* + * These set of macros are not really useful for the + * GPF/GPI/GPJ/GPN/GPP, useful for others set of GPIO's (4 bit) */ + #define S5P6440_GPIO_CONMASK(__gpio) (0xf << ((__gpio) * 4)) #define S5P6440_GPIO_INPUT(__gpio) (0x0 << ((__gpio) * 4)) #define S5P6440_GPIO_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) -/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit) - * */ +/* + * Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit) + */ + #define S5P6440_GPIO2_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) #define S5P6440_GPIO2_INPUT(__gpio) (0x0 << ((__gpio) * 2)) #define S5P6440_GPIO2_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h index a961f4beeb0c..4aaebdace55f 100644 --- a/arch/arm/mach-s5p6440/include/mach/regs-irq.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - IRQ register definitions + * S5P64X0 - IRQ register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h new file mode 100644 index 000000000000..ff85b4b6e8d9 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h @@ -0,0 +1,46 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for s5p64x0 clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H __FILE__ + +#include <linux/clk.h> + +extern struct clksrc_clk clk_mout_apll; +extern struct clksrc_clk clk_mout_mpll; +extern struct clksrc_clk clk_mout_epll; + +extern int s5p64x0_epll_enable(struct clk *clk, int enable); +extern unsigned long s5p64x0_epll_get_rate(struct clk *clk); + +extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk); +extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate); +extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate); + +extern struct clk_ops s5p64x0_clkarm_ops; + +extern struct clksrc_clk clk_armclk; +extern struct clksrc_clk clk_dout_mpll; + +extern struct clk *clkset_hclk_low_list[]; +extern struct clksrc_sources clkset_hclk_low; + +extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable); +extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable); +extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable); +extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable); +extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable); +extern int s5p64x0_mem_ctrl(struct clk *clk, int enable); + +extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable); + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h new file mode 100644 index 000000000000..170a20a9643a --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h @@ -0,0 +1,20 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SPI_CLKS_H +#define __ASM_ARCH_SPI_CLKS_H __FILE__ + +#define S5P64X0_SPI_SRCCLK_PCLK 0 +#define S5P64X0_SPI_SRCCLK_SCLK 1 + +#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h index a359ee3fa510..60f57532c970 100644 --- a/arch/arm/mach-s5p6440/include/mach/system.h +++ b/arch/arm/mach-s5p64x0/include/mach/system.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/system.h +/* linux/arch/arm/mach-s5p64x0/include/mach/system.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - system support header + * S5P64X0 - system support header * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h index 2f25c7f07970..00aa7f1d8e51 100644 --- a/arch/arm/mach-s5p6440/include/mach/tick.h +++ b/arch/arm/mach-s5p64x0/include/mach/tick.h @@ -1,9 +1,14 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/tick.h +/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Timer tick support definitions + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S5P64X0 - Timer tick support definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p6440/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h index fb2e8cd40829..4b91faa195a8 100644 --- a/arch/arm/mach-s5p6440/include/mach/timex.h +++ b/arch/arm/mach-s5p64x0/include/mach/timex.h @@ -1,9 +1,12 @@ -/* arch/arm/mach-s3c64xx/include/mach/timex.h +/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (c) 2003-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C6400 - time parameters + * S5P64X0 - time parameters * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h new file mode 100644 index 000000000000..c65b229aab23 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h @@ -0,0 +1,212 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <mach/map.h> + +/* + * cannot use commonly <plat/uncompress.h> + * because uart base of S5P6440 and S5P6450 is different + */ + +typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ + +/* uart setup */ + +static unsigned int fifo_mask; +static unsigned int fifo_max; + +/* forward declerations */ + +static void arch_detect_cpu(void); + +/* defines for UART registers */ + +#include <plat/regs-serial.h> +#include <plat/regs-watchdog.h> + +/* working in physical space... */ +#undef S3C2410_WDOGREG +#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) + +/* how many bytes we allow into the FIFO at a time in FIFO mode */ +#define FIFO_MAX (14) + +static unsigned long uart_base; + +static __inline__ void get_uart_base(void) +{ + unsigned int chipid; + + chipid = *(const volatile unsigned int __force *) 0xE0100118; + + uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT; + + if ((chipid & 0xff000) == 0x50000) + uart_base += 0xEC800000; + else + uart_base += 0xEC000000; +} + +static __inline__ void uart_wr(unsigned int reg, unsigned int val) +{ + volatile unsigned int *ptr; + + get_uart_base(); + ptr = (volatile unsigned int *)(reg + uart_base); + *ptr = val; +} + +static __inline__ unsigned int uart_rd(unsigned int reg) +{ + volatile unsigned int *ptr; + + get_uart_base(); + ptr = (volatile unsigned int *)(reg + uart_base); + return *ptr; +} + +/* + * we can deal with the case the UARTs are being run + * in FIFO mode, so that we don't hold up our execution + * waiting for tx to happen... + */ + +static void putc(int ch) +{ + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { + int level; + + while (1) { + level = uart_rd(S3C2410_UFSTAT); + level &= fifo_mask; + + if (level < fifo_max) + break; + } + + } else { + /* not using fifos */ + + while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) + barrier(); + } + + /* write byte to transmission register */ + uart_wr(S3C2410_UTXH, ch); +} + +static inline void flush(void) +{ +} + +#define __raw_writel(d, ad) \ + do { \ + *((volatile unsigned int __force *)(ad)) = (d); \ + } while (0) + +/* + * CONFIG_S3C_BOOT_WATCHDOG + * + * Simple boot-time watchdog setup, to reboot the system if there is + * any problem with the boot process + */ + +#ifdef CONFIG_S3C_BOOT_WATCHDOG + +#define WDOG_COUNT (0xff00) + +static inline void arch_decomp_wdog(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); +} + +static void arch_decomp_wdog_start(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTDAT); + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); +} + +#else +#define arch_decomp_wdog_start() +#define arch_decomp_wdog() +#endif + +#ifdef CONFIG_S3C_BOOT_ERROR_RESET + +static void arch_decomp_error(const char *x) +{ + putstr("\n\n"); + putstr(x); + putstr("\n\n -- System resetting\n"); + + __raw_writel(0x4000, S3C2410_WTDAT); + __raw_writel(0x4000, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); + + while(1); +} + +#define arch_error arch_decomp_error +#endif + +#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO +static inline void arch_enable_uart_fifo(void) +{ + u32 fifocon = uart_rd(S3C2410_UFCON); + + if (!(fifocon & S3C2410_UFCON_FIFOMODE)) { + fifocon |= S3C2410_UFCON_RESETBOTH; + uart_wr(S3C2410_UFCON, fifocon); + + /* wait for fifo reset to complete */ + while (1) { + fifocon = uart_rd(S3C2410_UFCON); + if (!(fifocon & S3C2410_UFCON_RESETBOTH)) + break; + } + } +} +#else +#define arch_enable_uart_fifo() do { } while(0) +#endif + +static void arch_decomp_setup(void) +{ + /* + * we may need to setup the uart(s) here if we are not running + * on an BAST... the BAST will have left the uarts configured + * after calling linux. + */ + + arch_detect_cpu(); + arch_decomp_wdog_start(); + + /* + * Enable the UART FIFOs if they where not enabled and our + * configuration says we should turn them on. + */ + + arch_enable_uart_fifo(); +} + + + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h index e3f0eebf5205..97a9df38f1cf 100644 --- a/arch/arm/mach-s5p6440/include/mach/vmalloc.h +++ b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h @@ -1,4 +1,7 @@ -/* arch/arm/mach-s5p6440/include/mach/vmalloc.h +/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2010 Ben Dooks <ben-linux@fluff.org> * diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c new file mode 100644 index 000000000000..79833caf8165 --- /dev/null +++ b/arch/arm/mach-s5p64x0/init.c @@ -0,0 +1,73 @@ +/* linux/arch/arm/mach-s5p64x0/init.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Init support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> +#include <plat/regs-serial.h> + +static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = { + [0] = { + .name = "pclk_low", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "uclk1", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, +}; + +/* uart registration process */ + +void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + struct s3c2410_uartcfg *tcfg = cfg; + u32 ucnt; + + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { + if (!tcfg->clocks) { + tcfg->clocks = s5p64x0_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks); + } + } +} + +void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + int uart; + + for (uart = 0; uart < no; uart++) { + s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart); + s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART; + } + + s5p64x0_common_init_uarts(cfg, no); + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} + +void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s5p64x0_common_init_uarts(cfg, no); + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 9202aaac3b56..87c3f03c618c 100644 --- a/arch/arm/mach-s5p6440/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c +/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,21 +21,22 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/clk.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/irq.h> +#include <asm/mach-types.h> #include <mach/hardware.h> #include <mach/map.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> +#include <mach/regs-clock.h> +#include <mach/i2c.h> #include <plat/regs-serial.h> - +#include <plat/gpio-cfg.h> #include <plat/s5p6440.h> #include <plat/clock.h> -#include <mach/regs-clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/iic.h> @@ -58,43 +59,60 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 0, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 1, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 2, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 3, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, }; static struct platform_device *smdk6440_devices[] __initdata = { - &s5p6440_device_iis, &s3c_device_adc, &s3c_device_rtc, &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_ts, &s3c_device_wdt, + &s5p6440_device_iis, +}; + +static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6440_i2c0_cfg_gpio, +}; + +static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = { + .flags = 0, + .bus_num = 1, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6440_i2c1_cfg_gpio, }; static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = { @@ -113,7 +131,7 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { static void __init smdk6440_map_io(void) { - s5p_init_io(NULL, 0, S5P_SYS_ID); + s5p_init_io(NULL, 0, S5P64X0_SYS_ID); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); } @@ -122,9 +140,8 @@ static void __init smdk6440_machine_init(void) { s3c24xx_ts_set_platdata(&s3c_ts_platform); - /* I2C */ - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); + s3c_i2c0_set_platdata(&s5p6440_i2c0_data); + s3c_i2c1_set_platdata(&s5p6440_i2c1_data); i2c_register_board_info(0, smdk6440_i2c_devs0, ARRAY_SIZE(smdk6440_i2c_devs0)); i2c_register_board_info(1, smdk6440_i2c_devs1, @@ -135,9 +152,7 @@ static void __init smdk6440_machine_init(void) MACHINE_START(SMDK6440, "SMDK6440") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, - .boot_params = S5P_PA_SDRAM + 0x100, + .boot_params = S5P64X0_PA_SDRAM + 0x100, .init_irq = s5p6440_init_irq, .map_io = smdk6440_map_io, diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c new file mode 100644 index 000000000000..d609f5af2b98 --- /dev/null +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -0,0 +1,180 @@ +/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/i2c.h> + +#include <plat/regs-serial.h> +#include <plat/gpio-cfg.h> +#include <plat/s5p6450.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/iic.h> +#include <plat/pll.h> +#include <plat/adc.h> +#include <plat/ts.h> + +#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDK6450_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDK6450_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_TXTRIG16 | \ + S3C2410_UFCON_RXTRIG8) + +static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 + [4] = { + .hwport = 4, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#endif +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 + [5] = { + .hwport = 5, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#endif +}; + +static struct platform_device *smdk6450_devices[] __initdata = { + &s3c_device_adc, + &s3c_device_rtc, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_ts, + &s3c_device_wdt, + &s5p6450_device_iis0, + /* s5p6450_device_spi0 will be added */ +}; + +static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = { + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6450_i2c0_cfg_gpio, +}; + +static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = { + .flags = 0, + .bus_num = 1, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6450_i2c1_cfg_gpio, +}; + +static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung KS24C080C EEPROM */ +}; + +static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { + { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; + +static void __init smdk6450_map_io(void) +{ + s5p_init_io(NULL, 0, S5P64X0_SYS_ID); + s3c24xx_init_clocks(19200000); + s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); +} + +static void __init smdk6450_machine_init(void) +{ + s3c24xx_ts_set_platdata(&s3c_ts_platform); + + s3c_i2c0_set_platdata(&s5p6450_i2c0_data); + s3c_i2c1_set_platdata(&s5p6450_i2c1_data); + i2c_register_board_info(0, smdk6450_i2c_devs0, + ARRAY_SIZE(smdk6450_i2c_devs0)); + i2c_register_board_info(1, smdk6450_i2c_devs1, + ARRAY_SIZE(smdk6450_i2c_devs1)); + + platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); +} + +MACHINE_START(SMDK6450, "SMDK6450") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .boot_params = S5P64X0_PA_SDRAM + 0x100, + + .init_irq = s5p6450_init_irq, + .map_io = smdk6450_map_io, + .init_machine = smdk6450_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c index 2c99d14f7ac7..dc4cc65a5019 100644 --- a/arch/arm/mach-s5p6440/setup-i2c0.c +++ b/arch/arm/mach-s5p64x0/setup-i2c0.c @@ -1,11 +1,11 @@ -/* linux/arch/arm/mach-s5p6440/setup-i2c0.c +/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * I2C0 GPIO configuration. * - * Based on plat-s3c64xx/setup-i2c0.c + * Based on plat-s3c64x0/setup-i2c0.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,17 +14,29 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> struct platform_device; /* don't need the contents */ -#include <linux/gpio.h> #include <plat/gpio-cfg.h> #include <plat/iic.h> -void s3c_i2c0_cfg_gpio(struct platform_device *dev) +#include <mach/i2c.h> + +void s5p6440_i2c0_cfg_gpio(struct platform_device *dev) { s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP); } + +void s5p6450_i2c0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5P6450_GPB(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPB(5), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPB(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPB(6), S3C_GPIO_PULL_UP); +} + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5p6440/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c index 9a1537f786e0..2edd7912f8e4 100644 --- a/arch/arm/mach-s5p6440/setup-i2c1.c +++ b/arch/arm/mach-s5p64x0/setup-i2c1.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5p6440/setup-i2c1.c +/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * I2C1 GPIO configuration. * @@ -21,10 +21,22 @@ struct platform_device; /* don't need the contents */ #include <plat/gpio-cfg.h> #include <plat/iic.h> -void s3c_i2c1_cfg_gpio(struct platform_device *dev) +#include <mach/i2c.h> + +void s5p6440_i2c1_cfg_gpio(struct platform_device *dev) { s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6)); s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6)); s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP); } + +void s5p6450_i2c1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5P6450_GPR(9), S3C_GPIO_SFN(6)); + s3c_gpio_setpull(S5P6450_GPR(9), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPR(10), S3C_GPIO_SFN(6)); + s3c_gpio_setpull(S5P6450_GPR(10), S3C_GPIO_PULL_UP); +} + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index cd1afbce83e2..fd2708e7d8a9 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -1,5 +1,8 @@ /* linux/arch/arm/mach-s5pc100/cpu.c * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * @@ -57,11 +60,31 @@ static struct map_desc s5pc100_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PC100_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5PC100_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5PC100_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5P_PA_VIC2), + .pfn = __phys_to_pfn(S5PC100_PA_VIC2), .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5PC100_VA_OTHERS, .pfn = __phys_to_pfn(S5PC100_PA_OTHERS), .length = SZ_4K, diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index 70e02e91ee3c..b2ba95ddf8e0 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -22,13 +22,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 01b9134feff0..8751ef4a6804 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -44,19 +44,16 @@ #define S5PC100_PA_OTHERS (0xE0200000) #define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) -#define S5P_PA_GPIO (0xE0300000) +#define S5PC100_PA_GPIO (0xE0300000) #define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) /* Interrupt */ -#define S5PC100_PA_VIC (0xE4000000) +#define S5PC100_PA_VIC0 (0xE4000000) +#define S5PC100_PA_VIC1 (0xE4100000) +#define S5PC100_PA_VIC2 (0xE4200000) #define S5PC100_VA_VIC S3C_VA_IRQ -#define S5PC100_PA_VIC_OFFSET 0x100000 #define S5PC100_VA_VIC_OFFSET 0x10000 -#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) #define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) -#define S5P_PA_VIC0 S5PC1XX_PA_VIC(0) -#define S5P_PA_VIC1 S5PC1XX_PA_VIC(1) -#define S5P_PA_VIC2 S5PC1XX_PA_VIC(2) #define S5PC100_PA_ONENAND (0xE7100000) diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 020c3f98f81f..880fb075092c 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -235,8 +235,6 @@ static void __init smdkc100_machine_init(void) MACHINE_START(SMDKC100, "SMDKC100") /* Maintainer: Byungho Min <bhmin@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S5P_PA_SDRAM + 0x100, .init_irq = s5pc100_init_irq, .map_io = smdkc100_map_io, diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index d3a38955c741..5315fec3db86 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -53,11 +53,6 @@ config S5PV210_SETUP_SDHCI_GPIO help Common setup code for SDHCI gpio. -config S5PC110_DEV_ONENAND - bool - help - Compile in platform device definition for OneNAND1 controller - menu "S5PC110 Machines" config MACH_AQUILA @@ -71,7 +66,7 @@ config MACH_AQUILA select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 - select S5PC110_DEV_ONENAND + select S5P_DEV_ONENAND select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_SDHCI help @@ -88,7 +83,7 @@ config MACH_GONI select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 - select S5PC110_DEV_ONENAND + select S5P_DEV_ONENAND select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_SDHCI help diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 05048c5aa4c6..704548912408 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_MACH_GONI) += mach-goni.o obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o -obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 245b82b53df4..2f16bfc0a116 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s5pv210/cpu.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -51,6 +51,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PV210_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5PV210_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5PV210_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, .pfn = __phys_to_pfn(S5PV210_PA_VIC2), .length = SZ_16K, @@ -61,6 +76,11 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_SROMC, .pfn = __phys_to_pfn(S5PV210_PA_SROMC), .length = SZ_4K, diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 7872f5c3dfc2..169fe654a59e 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -21,13 +21,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index dd4fb6bf14b5..bd9afd52466a 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -17,7 +17,10 @@ #include <plat/map-s5p.h> #define S5PC110_PA_ONENAND (0xB0000000) +#define S5P_PA_ONENAND S5PC110_PA_ONENAND + #define S5PC110_PA_ONENAND_DMA (0xB0600000) +#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA #define S5PV210_PA_CHIPID (0xE0000000) #define S5P_PA_CHIPID S5PV210_PA_CHIPID @@ -26,7 +29,6 @@ #define S5P_PA_SYSCON S5PV210_PA_SYSCON #define S5PV210_PA_GPIO (0xE0200000) -#define S5P_PA_GPIO S5PV210_PA_GPIO /* SPI */ #define S5PV210_PA_SPI0 0xE1300000 @@ -72,16 +74,9 @@ #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) #define S5PV210_PA_VIC0 (0xF2000000) -#define S5P_PA_VIC0 S5PV210_PA_VIC0 - #define S5PV210_PA_VIC1 (0xF2100000) -#define S5P_PA_VIC1 S5PV210_PA_VIC1 - #define S5PV210_PA_VIC2 (0xF2200000) -#define S5P_PA_VIC2 S5PV210_PA_VIC2 - #define S5PV210_PA_VIC3 (0xF2300000) -#define S5P_PA_VIC3 S5PV210_PA_VIC3 #define S5PV210_PA_SDRAM (0x20000000) #define S5P_PA_SDRAM S5PV210_PA_SDRAM diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 0dda8012d6b2..00883087363c 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -477,7 +477,7 @@ static struct platform_device *aquila_devices[] __initdata = { &aquila_i2c_gpio_pmic, &aquila_device_gpiokeys, &s3c_device_fb, - &s5pc110_device_onenand, + &s5p_device_onenand, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, @@ -516,8 +516,6 @@ MACHINE_START(AQUILA, "Aquila") /* Maintainers: Marek Szyprowski <m.szyprowski@samsung.com> Kyungmin Park <kyungmin.park@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S5P_PA_SDRAM + 0x100, .init_irq = s5pv210_init_irq, .map_io = aquila_map_io, diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 53754d7d364e..d9ecf57fc2a5 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -456,7 +456,7 @@ static void goni_setup_sdhci(void) static struct platform_device *goni_devices[] __initdata = { &s3c_device_fb, - &s5pc110_device_onenand, + &s5p_device_onenand, &goni_i2c_gpio_pmic, &goni_device_gpiokeys, &s5p_device_fimc0, @@ -491,8 +491,6 @@ static void __init goni_machine_init(void) MACHINE_START(GONI, "GONI") /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S5P_PA_SDRAM + 0x100, .init_irq = s5pv210_init_irq, .map_io = goni_map_io, diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 8211bb87c54b..cea9bca79d88 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -127,8 +127,6 @@ static void __init smdkc110_machine_init(void) MACHINE_START(SMDKC110, "SMDKC110") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S5P_PA_SDRAM + 0x100, .init_irq = s5pv210_init_irq, .map_io = smdkc110_map_io, diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index fbbc0a3c3738..83189ae9da9a 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -165,8 +165,6 @@ static void __init smdkv210_machine_init(void) MACHINE_START(SMDKV210, "SMDKV210") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S5P_PA_SDRAM + 0x100, .init_irq = s5pv210_init_irq, .map_io = smdkv210_map_io, diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c index e5b261a99ab2..4add39853ff9 100644 --- a/arch/arm/mach-s5pv310/cpu.c +++ b/arch/arm/mach-s5pv310/cpu.c @@ -31,9 +31,14 @@ extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); /* Initial IO mappings */ static struct map_desc s5pv310_iodesc[] __initdata = { { - .virtual = (unsigned long)S5P_VA_COREPERI_BASE, - .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), - .length = SZ_8K, + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_CMU, + .pfn = __phys_to_pfn(S5PV310_PA_CMU), + .length = SZ_128K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_COMBINER_BASE, @@ -41,19 +46,24 @@ static struct map_desc s5pv310_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_COREPERI_BASE, + .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), + .length = SZ_8K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_L2CC, .pfn = __phys_to_pfn(S5PV310_PA_L2CC), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PV310_PA_GPIO1), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_CMU, - .pfn = __phys_to_pfn(S5PV310_PA_CMU), - .length = SZ_128K, + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, .type = MT_DEVICE, }, }; diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-s5pv310/include/mach/debug-macro.S index 6fb3893486be..b0d920c474d3 100644 --- a/arch/arm/mach-s5pv310/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv310/include/mach/debug-macro.S @@ -20,13 +20,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldreq \rp, = S3C_PA_UART + ldrne \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x10000 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h index 4cdedda6e652..471fc3bb199a 100644 --- a/arch/arm/mach-s5pv310/include/mach/irqs.h +++ b/arch/arm/mach-s5pv310/include/mach/irqs.h @@ -68,6 +68,8 @@ #define IRQ_IIC COMBINER_IRQ(27, 0) +#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) + /* Set the default NR_IRQS */ #define NR_IRQS COMBINER_IRQ(MAX_COMBINER_NR, 0) diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 213e1101a3b3..aff6d23624bb 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -25,6 +25,12 @@ #define S5PV310_PA_SYSRAM (0x02025000) +#define S5PC210_PA_ONENAND (0x0C000000) +#define S5P_PA_ONENAND S5PC210_PA_ONENAND + +#define S5PC210_PA_ONENAND_DMA (0x0C600000) +#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA + #define S5PV310_PA_CHIPID (0x10000000) #define S5P_PA_CHIPID S5PV310_PA_CHIPID @@ -46,7 +52,6 @@ #define S5PV310_PA_GPIO1 (0x11400000) #define S5PV310_PA_GPIO2 (0x11000000) #define S5PV310_PA_GPIO3 (0x03860000) -#define S5P_PA_GPIO S5PV310_PA_GPIO1 #define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h index 990f3ba88a1f..b7ec252384f4 100644 --- a/arch/arm/mach-s5pv310/include/mach/smp.h +++ b/arch/arm/mach-s5pv310/include/mach/smp.h @@ -7,17 +7,10 @@ #define ASM_ARCH_SMP_H __FILE__ #include <asm/hardware/gic.h> +#include <asm/smp_mpidr.h> extern void __iomem *gic_cpu_base_addr; -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x03; \ - }) - /* * We use IRQ1 as the IPI */ diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-s5pv310/mach-smdkv310.c index 0d6ab77709d2..46215a14b3bb 100644 --- a/arch/arm/mach-s5pv310/mach-smdkv310.c +++ b/arch/arm/mach-s5pv310/mach-smdkv310.c @@ -82,8 +82,6 @@ static void __init smdkv310_machine_init(void) MACHINE_START(SMDKV310, "SMDKV310") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S5P_PA_SDRAM + 0x100, .init_irq = s5pv310_init_irq, .map_io = smdkv310_map_io, diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c index 2388cb947936..d7c2ec770f88 100644 --- a/arch/arm/mach-s5pv310/mach-universal_c210.c +++ b/arch/arm/mach-s5pv310/mach-universal_c210.c @@ -76,8 +76,6 @@ static void __init universal_machine_init(void) MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S5P_PA_SDRAM + 0x100, .init_irq = s5pv310_init_irq, .map_io = universal_map_io, diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 169e5b87dbff..5778274a8260 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -447,8 +447,6 @@ static void __init assabet_map_io(void) MACHINE_START(ASSABET, "Intel-Assabet") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .fixup = fixup_assabet, .map_io = assabet_map_io, diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index 259cb2c15fff..4f19ff868b00 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -302,8 +302,6 @@ static void __init badge4_map_io(void) } MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .map_io = badge4_map_io, .init_irq = sa1100_init_irq, diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index bc950ef418af..98d780608c7e 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -135,8 +135,6 @@ static void __init cerf_init(void) MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") /* Maintainer: support@intrinsyc.com */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .map_io = cerf_map_io, .init_irq = cerf_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 16e682d5dbb7..d43c5ef58eb6 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -379,8 +379,6 @@ static void __init collie_map_io(void) } MACHINE_START(COLLIE, "Sharp-Collie") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .map_io = collie_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index 0c7cea0dc013..03d7376cf8a0 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -84,8 +84,6 @@ static void __init h3100_mach_init(void) } MACHINE_START(H3100, "Compaq iPAQ H3100") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .map_io = h3100_map_io, .init_irq = sa1100_init_irq, diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index af3b71459f8d..965f64a836f8 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -125,8 +125,6 @@ static void __init h3600_mach_init(void) } MACHINE_START(H3600, "Compaq iPAQ H3600") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .map_io = h3600_map_io, .init_irq = sa1100_init_irq, diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 51568dfc8e97..db5e434a17db 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -195,8 +195,6 @@ static void __init hackkit_init(void) */ MACHINE_START(HACKKIT, "HackKit Cpu Board") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .map_io = hackkit_map_io, .init_irq = sa1100_init_irq, diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S index 336adccea542..0cd0fc9635b6 100644 --- a/arch/arm/mach-sa1100/include/mach/debug-macro.S +++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S @@ -12,33 +12,37 @@ */ #include <mach/hardware.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical base address - movne \rx, #0xf8000000 @ virtual address + .macro addruart, rp, rv + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + moveq \rp, #0x80000000 @ physical base address + movne \rp, #0xf8000000 @ virtual address @ We probe for the active serial port here, coherently with @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h. @ We assume r1 can be clobbered. @ see if Ser3 is active - add \rx, \rx, #0x00050000 - ldr r1, [\rx, #UTCR3] - tst r1, #UTCR3_TXE + add \rp, \rp, #0x00050000 + ldr \rv, [\rp, #UTCR3] + tst \rv, #UTCR3_TXE @ if Ser3 is inactive, then try Ser1 - addeq \rx, \rx, #(0x00010000 - 0x00050000) - ldreq r1, [\rx, #UTCR3] - tsteq r1, #UTCR3_TXE + addeq \rp, \rp, #(0x00010000 - 0x00050000) + ldreq \rv, [\rp, #UTCR3] + tsteq \rv, #UTCR3_TXE @ if Ser1 is inactive, then try Ser2 - addeq \rx, \rx, #(0x00030000 - 0x00010000) - ldreq r1, [\rx, #UTCR3] - tsteq r1, #UTCR3_TXE + addeq \rp, \rp, #(0x00030000 - 0x00010000) + ldreq \rv, [\rp, #UTCR3] + tsteq \rv, #UTCR3_TXE + + @ clear top bits, and generate both phys and virt addresses + lsl \rp, \rp, #8 + lsr \rp, \rp, #8 + orr \rv, \rp, #0xf8000000 @ virtual + orr \rp, \rp, #0x80000000 @ physical - @ if all ports are inactive, then there is nothing we can do - moveq pc, lr .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index d3ec620618f1..491ac9f20fb4 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -364,8 +364,6 @@ static void __init jornada720_mach_init(void) MACHINE_START(JORNADA720, "HP Jornada 720") /* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .map_io = jornada720_map_io, .init_irq = sa1100_init_irq, diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 68069d6dc07a..7b9556b59057 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -61,8 +61,6 @@ static void __init lart_map_io(void) } MACHINE_START(LART, "LART") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .map_io = lart_map_io, .init_irq = sa1100_init_irq, diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 1ccd6018d3a3..42b80400c100 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -146,8 +146,6 @@ static void __init pleb_map_io(void) } MACHINE_START(PLEB, "PLEB") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .map_io = pleb_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 85e82bb73d7e..7917b2405579 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -82,8 +82,6 @@ static void __init shannon_map_io(void) } MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .map_io = shannon_map_io, .init_irq = sa1100_init_irq, diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 49cfd64663ac..27692d0ffbe8 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -228,8 +228,6 @@ arch_initcall(simpad_init); MACHINE_START(SIMPAD, "Simpad") /* Maintainer: Holger Freyther */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .map_io = simpad_map_io, .init_irq = sa1100_init_irq, diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index 358d875ace14..5cf7f94c1f31 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -152,8 +152,6 @@ static struct sys_timer shark_timer = { MACHINE_START(SHARK, "Shark") /* Maintainer: Alexander Schulz */ - .phys_io = 0x40000000, - .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, .boot_params = 0x08003000, .map_io = shark_map_io, .init_irq = shark_init_irq, diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S index 5ea24d4d1ba6..a473f55dc71f 100644 --- a/arch/arm/mach-shark/include/mach/debug-macro.S +++ b/arch/arm/mach-shark/include/mach/debug-macro.S @@ -11,9 +11,10 @@ * */ - .macro addruart, rx, tmp - mov \rx, #0xe0000000 - orr \rx, \rx, #0x000003f8 + .macro addruart, rp, rv + mov \rp, #0xe0000000 + orr \rp, \rp, #0x000003f8 + mov \rv, \rp .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h index f6c6837c5451..8e845b6a7cb5 100644 --- a/arch/arm/mach-shark/include/mach/vmalloc.h +++ b/arch/arm/mach-shark/include/mach/vmalloc.h @@ -1,4 +1,4 @@ /* * arch/arm/mach-shark/include/mach/vmalloc.h */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 95935c83c306..14923989ea05 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -1105,8 +1105,6 @@ static struct sys_timer ap4evb_timer = { }; MACHINE_START(AP4EVB, "ap4evb") - .phys_io = 0xe6000000, - .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, .map_io = ap4evb_map_io, .init_irq = sh7372_init_irq, .init_machine = ap4evb_init, diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index a5525901e91f..3b83d6320bec 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -365,8 +365,6 @@ static struct sys_timer g3evm_timer = { }; MACHINE_START(G3EVM, "g3evm") - .phys_io = 0xe6000000, - .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, .map_io = g3evm_map_io, .init_irq = sh7367_init_irq, .init_machine = g3evm_init, diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index 2c3ff6f7f34c..5b3b582ef3f2 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -392,8 +392,6 @@ static struct sys_timer g4evm_timer = { }; MACHINE_START(G4EVM, "g4evm") - .phys_io = 0xe6000000, - .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, .map_io = g4evm_map_io, .init_irq = sh7377_init_irq, .init_machine = g4evm_init, diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c index 90d8fe6f10fe..06158848afd9 100644 --- a/arch/arm/mach-stmp378x/stmp378x_devb.c +++ b/arch/arm/mach-stmp378x/stmp378x_devb.c @@ -324,8 +324,6 @@ static void __init stmp378x_devb_init(void) } MACHINE_START(STMP378X, "STMP378X") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, .boot_params = 0x40000100, .map_io = stmp378x_map_io, .init_irq = stmp378x_init_irq, diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c index 394f21ab59e6..311d8552d362 100644 --- a/arch/arm/mach-stmp37xx/stmp37xx_devb.c +++ b/arch/arm/mach-stmp37xx/stmp37xx_devb.c @@ -91,8 +91,6 @@ static void __init stmp37xx_devb_init(void) } MACHINE_START(STMP37XX, "STMP37XX") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, .boot_params = 0x40000100, .map_io = stmp37xx_map_io, .init_irq = stmp37xx_init_irq, diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig new file mode 100644 index 000000000000..ad86415d1577 --- /dev/null +++ b/arch/arm/mach-tcc8k/Kconfig @@ -0,0 +1,11 @@ +if ARCH_TCC8K + +comment "TCC8000 systems:" + +config MACH_TCC8000_SDK + bool "Telechips TCC8000-SDK development kit" + default y + help + Support for the Telechips TCC8000-SDK board. + +endif diff --git a/arch/arm/mach-tcc8k/Makefile b/arch/arm/mach-tcc8k/Makefile new file mode 100644 index 000000000000..9bacf31e49ba --- /dev/null +++ b/arch/arm/mach-tcc8k/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for TCC8K boards and common files. +# + +# Common support +obj-y += clock.o irq.o time.o io.o devices.o + +# Board specific support +obj-$(CONFIG_MACH_TCC8000_SDK) += board-tcc8000-sdk.o diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot new file mode 100644 index 000000000000..f135c9deae10 --- /dev/null +++ b/arch/arm/mach-tcc8k/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x20008000 +params_phys-y := 0x20000100 +initrd_phys-y := 0x20800000 diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c new file mode 100644 index 000000000000..7991415e666b --- /dev/null +++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include <mach/clock.h> + +#include "common.h" + +#define XI_FREQUENCY 12000000 +#define XTI_FREQUENCY 32768 + +#ifdef CONFIG_MTD_NAND_TCC +/* NAND */ +static struct tcc_nand_platform_data tcc8k_sdk_nand_data = { + .width = 1, + .hw_ecc = 0, +}; +#endif + +static void __init tcc8k_init(void) +{ +#ifdef CONFIG_MTD_NAND_TCC + tcc_nand_device.dev.platform_data = &tcc8k_sdk_nand_data; + platform_device_register(&tcc_nand_device); +#endif +} + +static void __init tcc8k_init_timer(void) +{ + tcc_clocks_init(XI_FREQUENCY, XTI_FREQUENCY); +} + +static struct sys_timer tcc8k_timer = { + .init = tcc8k_init_timer, +}; + +static void __init tcc8k_map_io(void) +{ + tcc8k_map_common_io(); +} + +MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board") + .boot_params = PHYS_OFFSET + 0x00000100, + .map_io = tcc8k_map_io, + .init_irq = tcc8k_init_irq, + .init_machine = tcc8k_init, + .timer = &tcc8k_timer, +MACHINE_END diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c new file mode 100644 index 000000000000..ba32a15127ab --- /dev/null +++ b/arch/arm/mach-tcc8k/clock.c @@ -0,0 +1,567 @@ +/* + * Lowlevel clock handling for Telechips TCC8xxx SoCs + * + * Copyright (C) 2010 by Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL v2 + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/spinlock.h> + +#include <asm/clkdev.h> + +#include <mach/clock.h> +#include <mach/irqs.h> +#include <mach/tcc8k-regs.h> + +#include "common.h" + +#define BCLKCTR0 (CKC_BASE + BCLKCTR0_OFFS) +#define BCLKCTR1 (CKC_BASE + BCLKCTR1_OFFS) + +#define ACLKREF (CKC_BASE + ACLKREF_OFFS) +#define ACLKUART0 (CKC_BASE + ACLKUART0_OFFS) +#define ACLKUART1 (CKC_BASE + ACLKUART1_OFFS) +#define ACLKUART2 (CKC_BASE + ACLKUART2_OFFS) +#define ACLKUART3 (CKC_BASE + ACLKUART3_OFFS) +#define ACLKUART4 (CKC_BASE + ACLKUART4_OFFS) +#define ACLKI2C (CKC_BASE + ACLKI2C_OFFS) +#define ACLKADC (CKC_BASE + ACLKADC_OFFS) +#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS) +#define ACLKLCD (CKC_BASE + ACLKLCD_OFFS) +#define ACLKSDH0 (CKC_BASE + ACLKSDH0_OFFS) +#define ACLKSDH1 (CKC_BASE + ACLKSDH1_OFFS) +#define ACLKSPI0 (CKC_BASE + ACLKSPI0_OFFS) +#define ACLKSPI1 (CKC_BASE + ACLKSPI1_OFFS) +#define ACLKSPDIF (CKC_BASE + ACLKSPDIF_OFFS) +#define ACLKC3DEC (CKC_BASE + ACLKC3DEC_OFFS) +#define ACLKCAN0 (CKC_BASE + ACLKCAN0_OFFS) +#define ACLKCAN1 (CKC_BASE + ACLKCAN1_OFFS) +#define ACLKGSB0 (CKC_BASE + ACLKGSB0_OFFS) +#define ACLKGSB1 (CKC_BASE + ACLKGSB1_OFFS) +#define ACLKGSB2 (CKC_BASE + ACLKGSB2_OFFS) +#define ACLKGSB3 (CKC_BASE + ACLKGSB3_OFFS) +#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS) +#define ACLKTCT (CKC_BASE + ACLKTCT_OFFS) +#define ACLKTCX (CKC_BASE + ACLKTCX_OFFS) +#define ACLKTCZ (CKC_BASE + ACLKTCZ_OFFS) + +/* Crystal frequencies */ +static unsigned long xi_rate, xti_rate; + +static void __iomem *pll_cfg_addr(int pll) +{ + switch (pll) { + case 0: return (CKC_BASE + PLL0CFG_OFFS); + case 1: return (CKC_BASE + PLL1CFG_OFFS); + case 2: return (CKC_BASE + PLL2CFG_OFFS); + default: + BUG(); + } +} + +static int pll_enable(int pll, int enable) +{ + u32 reg; + void __iomem *addr = pll_cfg_addr(pll); + + reg = __raw_readl(addr); + if (enable) + reg &= ~PLLxCFG_PD; + else + reg |= PLLxCFG_PD; + + __raw_writel(reg, addr); + return 0; +} + +static int xi_enable(int enable) +{ + u32 reg; + + reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS); + if (enable) + reg |= CLKCTRL_XE; + else + reg &= ~CLKCTRL_XE; + + __raw_writel(reg, CKC_BASE + CLKCTRL_OFFS); + return 0; +} + +static int root_clk_enable(enum root_clks src) +{ + switch (src) { + case CLK_SRC_PLL0: return pll_enable(0, 1); + case CLK_SRC_PLL1: return pll_enable(1, 1); + case CLK_SRC_PLL2: return pll_enable(2, 1); + case CLK_SRC_XI: return xi_enable(1); + default: + BUG(); + } + return 0; +} + +static int root_clk_disable(enum root_clks root_src) +{ + switch (root_src) { + case CLK_SRC_PLL0: return pll_enable(0, 0); + case CLK_SRC_PLL1: return pll_enable(1, 0); + case CLK_SRC_PLL2: return pll_enable(2, 0); + case CLK_SRC_XI: return xi_enable(0); + default: + BUG(); + } + return 0; +} + +static int enable_clk(struct clk *clk) +{ + u32 reg; + + if (clk->root_id != CLK_SRC_NOROOT) + return root_clk_enable(clk->root_id); + + if (clk->aclkreg) { + reg = __raw_readl(clk->aclkreg); + reg |= ACLK_EN; + __raw_writel(reg, clk->aclkreg); + } + if (clk->bclkctr) { + reg = __raw_readl(clk->bclkctr); + reg |= 1 << clk->bclk_shift; + __raw_writel(reg, clk->bclkctr); + } + return 0; +} + +static void disable_clk(struct clk *clk) +{ + u32 reg; + + if (clk->root_id != CLK_SRC_NOROOT) { + root_clk_disable(clk->root_id); + return; + } + + if (clk->bclkctr) { + reg = __raw_readl(clk->bclkctr); + reg &= ~(1 << clk->bclk_shift); + __raw_writel(reg, clk->bclkctr); + } + if (clk->aclkreg) { + reg = __raw_readl(clk->aclkreg); + reg &= ~ACLK_EN; + __raw_writel(reg, clk->aclkreg); + } +} + +static unsigned long get_rate_pll(int pll) +{ + u32 reg; + unsigned long s, m, p; + void __iomem *addr = pll_cfg_addr(pll); + + reg = __raw_readl(addr); + s = (reg >> 16) & 0x07; + m = (reg >> 8) & 0xff; + p = reg & 0x3f; + + return (m * xi_rate) / (p * (1 << s)); +} + +static unsigned long get_rate_pll_div(int pll) +{ + u32 reg; + unsigned long div = 0; + void __iomem *addr; + + switch (pll) { + case 0: + addr = CKC_BASE + CLKDIVC0_OFFS; + reg = __raw_readl(addr); + if (reg & CLKDIVC0_P0E) + div = (reg >> 24) & 0x3f; + break; + case 1: + addr = CKC_BASE + CLKDIVC0_OFFS; + reg = __raw_readl(addr); + if (reg & CLKDIVC0_P1E) + div = (reg >> 16) & 0x3f; + break; + case 2: + addr = CKC_BASE + CLKDIVC1_OFFS; + reg = __raw_readl(addr); + if (reg & CLKDIVC1_P2E) + div = __raw_readl(addr) & 0x3f; + break; + } + return get_rate_pll(pll) / (div + 1); +} + +static unsigned long get_rate_xi_div(void) +{ + unsigned long div = 0; + u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS); + + if (reg & CLKDIVC0_XE) + div = (reg >> 8) & 0x3f; + + return xi_rate / (div + 1); +} + +static unsigned long get_rate_xti_div(void) +{ + unsigned long div = 0; + u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS); + + if (reg & CLKDIVC0_XTE) + div = reg & 0x3f; + + return xti_rate / (div + 1); +} + +static unsigned long root_clk_get_rate(enum root_clks src) +{ + switch (src) { + case CLK_SRC_PLL0: return get_rate_pll(0); + case CLK_SRC_PLL1: return get_rate_pll(1); + case CLK_SRC_PLL2: return get_rate_pll(2); + case CLK_SRC_PLL0DIV: return get_rate_pll_div(0); + case CLK_SRC_PLL1DIV: return get_rate_pll_div(1); + case CLK_SRC_PLL2DIV: return get_rate_pll_div(2); + case CLK_SRC_XI: return xi_rate; + case CLK_SRC_XTI: return xti_rate; + case CLK_SRC_XIDIV: return get_rate_xi_div(); + case CLK_SRC_XTIDIV: return get_rate_xti_div(); + default: return 0; + } +} + +static unsigned long aclk_get_rate(struct clk *clk) +{ + u32 reg; + unsigned long div; + unsigned int src; + + reg = __raw_readl(clk->aclkreg); + div = reg & 0x0fff; + src = (reg >> ACLK_SEL_SHIFT) & CLK_SRC_MASK; + return root_clk_get_rate(src) / (div + 1); +} + +static unsigned long aclk_best_div(struct clk *clk, unsigned long rate) +{ + unsigned long div, src, freq, r1, r2; + + src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT; + src &= CLK_SRC_MASK; + freq = root_clk_get_rate(src); + div = freq / rate + 1; + r1 = freq / div; + r2 = freq / (div + 1); + if (r2 >= rate) + return div + 1; + if ((rate - r2) < (r1 - rate)) + return div + 1; + + return div; +} + +static unsigned long aclk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned int src; + + src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT; + src &= CLK_SRC_MASK; + + return root_clk_get_rate(src) / aclk_best_div(clk, rate); +} + +static int aclk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + + reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK; + reg |= aclk_best_div(clk, rate); + return 0; +} + +static unsigned long get_rate_sys(struct clk *clk) +{ + unsigned int src; + + src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK; + return root_clk_get_rate(src); +} + +static unsigned long get_rate_bus(struct clk *clk) +{ + unsigned int div; + + div = (__raw_readl(CKC_BASE + CLKCTRL_OFFS) >> 4) & 0xff; + return get_rate_sys(clk) / (div + 1); +} + +static unsigned long get_rate_cpu(struct clk *clk) +{ + unsigned int reg, div, fsys, fbus; + + fbus = get_rate_bus(clk); + reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS); + if (reg & (1 << 29)) + return fbus; + fsys = get_rate_sys(clk); + div = (reg >> 16) & 0x0f; + return fbus + ((fsys - fbus) * (div + 1)) / 16; +} + +static unsigned long get_rate_root(struct clk *clk) +{ + return root_clk_get_rate(clk->root_id); +} + +static int aclk_set_parent(struct clk *clock, struct clk *parent) +{ + u32 reg; + + if (clock->parent == parent) + return 0; + + clock->parent = parent; + + if (!parent) + return 0; + + if (parent->root_id == CLK_SRC_NOROOT) + return 0; + reg = __raw_readl(clock->aclkreg); + reg &= ~ACLK_SEL_MASK; + reg |= (parent->root_id << ACLK_SEL_SHIFT) & ACLK_SEL_MASK; + __raw_writel(reg, clock->aclkreg); + + return 0; +} + +#define DEFINE_ROOT_CLOCK(name, ri, p) \ + static struct clk name = { \ + .root_id = ri, \ + .get_rate = get_rate_root, \ + .enable = enable_clk, \ + .disable = disable_clk, \ + .parent = p, \ + }; + +#define DEFINE_SPECIAL_CLOCK(name, gr, p) \ + static struct clk name = { \ + .root_id = CLK_SRC_NOROOT, \ + .get_rate = gr, \ + .parent = p, \ + }; + +#define DEFINE_ACLOCK(name, bc, bs, ar) \ + static struct clk name = { \ + .root_id = CLK_SRC_NOROOT, \ + .bclkctr = bc, \ + .bclk_shift = bs, \ + .aclkreg = ar, \ + .get_rate = aclk_get_rate, \ + .set_rate = aclk_set_rate, \ + .round_rate = aclk_round_rate, \ + .enable = enable_clk, \ + .disable = disable_clk, \ + .set_parent = aclk_set_parent, \ + }; + +#define DEFINE_BCLOCK(name, bc, bs, gr, p) \ + static struct clk name = { \ + .root_id = CLK_SRC_NOROOT, \ + .bclkctr = bc, \ + .bclk_shift = bs, \ + .get_rate = gr, \ + .enable = enable_clk, \ + .disable = disable_clk, \ + .parent = p, \ + }; + +DEFINE_ROOT_CLOCK(xi, CLK_SRC_XI, NULL) +DEFINE_ROOT_CLOCK(xti, CLK_SRC_XTI, NULL) +DEFINE_ROOT_CLOCK(xidiv, CLK_SRC_XIDIV, &xi) +DEFINE_ROOT_CLOCK(xtidiv, CLK_SRC_XTIDIV, &xti) +DEFINE_ROOT_CLOCK(pll0, CLK_SRC_PLL0, &xi) +DEFINE_ROOT_CLOCK(pll1, CLK_SRC_PLL1, &xi) +DEFINE_ROOT_CLOCK(pll2, CLK_SRC_PLL2, &xi) +DEFINE_ROOT_CLOCK(pll0div, CLK_SRC_PLL0DIV, &pll0) +DEFINE_ROOT_CLOCK(pll1div, CLK_SRC_PLL1DIV, &pll1) +DEFINE_ROOT_CLOCK(pll2div, CLK_SRC_PLL2DIV, &pll2) + +/* The following 3 clocks are special and are initialized explicitly later */ +DEFINE_SPECIAL_CLOCK(sys, get_rate_sys, NULL) +DEFINE_SPECIAL_CLOCK(bus, get_rate_bus, &sys) +DEFINE_SPECIAL_CLOCK(cpu, get_rate_cpu, &sys) + +DEFINE_ACLOCK(tct, NULL, 0, ACLKTCT) +DEFINE_ACLOCK(tcx, NULL, 0, ACLKTCX) +DEFINE_ACLOCK(tcz, NULL, 0, ACLKTCZ) +DEFINE_ACLOCK(ref, NULL, 0, ACLKREF) +DEFINE_ACLOCK(uart0, BCLKCTR0, 5, ACLKUART0) +DEFINE_ACLOCK(uart1, BCLKCTR0, 23, ACLKUART1) +DEFINE_ACLOCK(uart2, BCLKCTR0, 6, ACLKUART2) +DEFINE_ACLOCK(uart3, BCLKCTR0, 8, ACLKUART3) +DEFINE_ACLOCK(uart4, BCLKCTR1, 6, ACLKUART4) +DEFINE_ACLOCK(i2c, BCLKCTR0, 7, ACLKI2C) +DEFINE_ACLOCK(adc, BCLKCTR0, 10, ACLKADC) +DEFINE_ACLOCK(usbh0, BCLKCTR0, 11, ACLKUSBH) +DEFINE_ACLOCK(lcd, BCLKCTR0, 13, ACLKLCD) +DEFINE_ACLOCK(sd0, BCLKCTR0, 17, ACLKSDH0) +DEFINE_ACLOCK(sd1, BCLKCTR1, 5, ACLKSDH1) +DEFINE_ACLOCK(spi0, BCLKCTR0, 24, ACLKSPI0) +DEFINE_ACLOCK(spi1, BCLKCTR0, 30, ACLKSPI1) +DEFINE_ACLOCK(spdif, BCLKCTR1, 2, ACLKSPDIF) +DEFINE_ACLOCK(c3dec, BCLKCTR1, 9, ACLKC3DEC) +DEFINE_ACLOCK(can0, BCLKCTR1, 10, ACLKCAN0) +DEFINE_ACLOCK(can1, BCLKCTR1, 11, ACLKCAN1) +DEFINE_ACLOCK(gsb0, BCLKCTR1, 13, ACLKGSB0) +DEFINE_ACLOCK(gsb1, BCLKCTR1, 14, ACLKGSB1) +DEFINE_ACLOCK(gsb2, BCLKCTR1, 15, ACLKGSB2) +DEFINE_ACLOCK(gsb3, BCLKCTR1, 16, ACLKGSB3) +DEFINE_ACLOCK(usbh1, BCLKCTR1, 20, ACLKUSBH) + +DEFINE_BCLOCK(dai0, BCLKCTR0, 0, NULL, NULL) +DEFINE_BCLOCK(pic, BCLKCTR0, 1, NULL, NULL) +DEFINE_BCLOCK(tc, BCLKCTR0, 2, NULL, NULL) +DEFINE_BCLOCK(gpio, BCLKCTR0, 3, NULL, NULL) +DEFINE_BCLOCK(usbd, BCLKCTR0, 4, NULL, NULL) +DEFINE_BCLOCK(ecc, BCLKCTR0, 9, NULL, NULL) +DEFINE_BCLOCK(gdma0, BCLKCTR0, 12, NULL, NULL) +DEFINE_BCLOCK(rtc, BCLKCTR0, 15, NULL, NULL) +DEFINE_BCLOCK(nfc, BCLKCTR0, 16, NULL, NULL) +DEFINE_BCLOCK(g2d, BCLKCTR0, 18, NULL, NULL) +DEFINE_BCLOCK(gdma1, BCLKCTR0, 22, NULL, NULL) +DEFINE_BCLOCK(mscl, BCLKCTR0, 25, NULL, NULL) +DEFINE_BCLOCK(bdma, BCLKCTR1, 0, NULL, NULL) +DEFINE_BCLOCK(adma0, BCLKCTR1, 1, NULL, NULL) +DEFINE_BCLOCK(scfg, BCLKCTR1, 3, NULL, NULL) +DEFINE_BCLOCK(cid, BCLKCTR1, 4, NULL, NULL) +DEFINE_BCLOCK(dai1, BCLKCTR1, 7, NULL, NULL) +DEFINE_BCLOCK(adma1, BCLKCTR1, 8, NULL, NULL) +DEFINE_BCLOCK(gps, BCLKCTR1, 12, NULL, NULL) +DEFINE_BCLOCK(gdma2, BCLKCTR1, 17, NULL, NULL) +DEFINE_BCLOCK(gdma3, BCLKCTR1, 18, NULL, NULL) +DEFINE_BCLOCK(ddrc, BCLKCTR1, 19, NULL, NULL) + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, + +static struct clk_lookup lookups[] = { + _REGISTER_CLOCK(NULL, "bus", bus) + _REGISTER_CLOCK(NULL, "cpu", cpu) + _REGISTER_CLOCK(NULL, "tct", tct) + _REGISTER_CLOCK(NULL, "tcx", tcx) + _REGISTER_CLOCK(NULL, "tcz", tcz) + _REGISTER_CLOCK(NULL, "ref", ref) + _REGISTER_CLOCK(NULL, "dai0", dai0) + _REGISTER_CLOCK(NULL, "pic", pic) + _REGISTER_CLOCK(NULL, "tc", tc) + _REGISTER_CLOCK(NULL, "gpio", gpio) + _REGISTER_CLOCK(NULL, "usbd", usbd) + _REGISTER_CLOCK("tcc-uart.0", NULL, uart0) + _REGISTER_CLOCK("tcc-uart.2", NULL, uart2) + _REGISTER_CLOCK("tcc-i2c", NULL, i2c) + _REGISTER_CLOCK("tcc-uart.3", NULL, uart3) + _REGISTER_CLOCK(NULL, "ecc", ecc) + _REGISTER_CLOCK(NULL, "adc", adc) + _REGISTER_CLOCK("tcc-usbh.0", "usb", usbh0) + _REGISTER_CLOCK(NULL, "gdma0", gdma0) + _REGISTER_CLOCK(NULL, "lcd", lcd) + _REGISTER_CLOCK(NULL, "rtc", rtc) + _REGISTER_CLOCK(NULL, "nfc", nfc) + _REGISTER_CLOCK("tcc-mmc.0", NULL, sd0) + _REGISTER_CLOCK(NULL, "g2d", g2d) + _REGISTER_CLOCK(NULL, "gdma1", gdma1) + _REGISTER_CLOCK("tcc-uart.1", NULL, uart1) + _REGISTER_CLOCK("tcc-spi.0", NULL, spi0) + _REGISTER_CLOCK(NULL, "mscl", mscl) + _REGISTER_CLOCK("tcc-spi.1", NULL, spi1) + _REGISTER_CLOCK(NULL, "bdma", bdma) + _REGISTER_CLOCK(NULL, "adma0", adma0) + _REGISTER_CLOCK(NULL, "spdif", spdif) + _REGISTER_CLOCK(NULL, "scfg", scfg) + _REGISTER_CLOCK(NULL, "cid", cid) + _REGISTER_CLOCK("tcc-mmc.1", NULL, sd1) + _REGISTER_CLOCK("tcc-uart.4", NULL, uart4) + _REGISTER_CLOCK(NULL, "dai1", dai1) + _REGISTER_CLOCK(NULL, "adma1", adma1) + _REGISTER_CLOCK(NULL, "c3dec", c3dec) + _REGISTER_CLOCK("tcc-can.0", NULL, can0) + _REGISTER_CLOCK("tcc-can.1", NULL, can1) + _REGISTER_CLOCK(NULL, "gps", gps) + _REGISTER_CLOCK("tcc-gsb.0", NULL, gsb0) + _REGISTER_CLOCK("tcc-gsb.1", NULL, gsb1) + _REGISTER_CLOCK("tcc-gsb.2", NULL, gsb2) + _REGISTER_CLOCK("tcc-gsb.3", NULL, gsb3) + _REGISTER_CLOCK(NULL, "gdma2", gdma2) + _REGISTER_CLOCK(NULL, "gdma3", gdma3) + _REGISTER_CLOCK(NULL, "ddrc", ddrc) + _REGISTER_CLOCK("tcc-usbh.1", "usb", usbh1) +}; + +static struct clk *root_clk_by_index(enum root_clks src) +{ + switch (src) { + case CLK_SRC_PLL0: return &pll0; + case CLK_SRC_PLL1: return &pll1; + case CLK_SRC_PLL2: return &pll2; + case CLK_SRC_PLL0DIV: return &pll0div; + case CLK_SRC_PLL1DIV: return &pll1div; + case CLK_SRC_PLL2DIV: return &pll2div; + case CLK_SRC_XI: return ξ + case CLK_SRC_XTI: return &xti; + case CLK_SRC_XIDIV: return &xidiv; + case CLK_SRC_XTIDIV: return &xtidiv; + default: return NULL; + } +} + +static void find_aclk_parent(struct clk *clk) +{ + unsigned int src; + struct clk *clock; + + if (!clk->aclkreg) + return; + + src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT; + src &= CLK_SRC_MASK; + + clock = root_clk_by_index(src); + if (!clock) + return; + + clk->parent = clock; + clk->set_parent = aclk_set_parent; +} + +void __init tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq) +{ + int i; + + xi_rate = xi_freq; + xti_rate = xti_freq; + + /* fixup parents and add the clock */ + for (i = 0; i < ARRAY_SIZE(lookups); i++) { + find_aclk_parent(lookups[i].clk); + clkdev_add(&lookups[i]); + } + tcc8k_timer_init(&tcz, (void __iomem *)TIMER_BASE, INT_TC32); +} diff --git a/arch/arm/mach-tcc8k/common.h b/arch/arm/mach-tcc8k/common.h new file mode 100644 index 000000000000..705690add395 --- /dev/null +++ b/arch/arm/mach-tcc8k/common.h @@ -0,0 +1,15 @@ +#ifndef MACH_TCC8K_COMMON_H +#define MACH_TCC8K_COMMON_H + +#include <linux/platform_device.h> + +extern struct platform_device tcc_nand_device; + +struct clk; + +extern void tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq); +extern void tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq); +extern void tcc8k_init_irq(void); +extern void tcc8k_map_common_io(void); + +#endif diff --git a/arch/arm/mach-tcc8k/devices.c b/arch/arm/mach-tcc8k/devices.c new file mode 100644 index 000000000000..6722ad7c2836 --- /dev/null +++ b/arch/arm/mach-tcc8k/devices.c @@ -0,0 +1,239 @@ +/* + * linux/arch/arm/mach-tcc8k/devices.c + * + * Copyright (C) Telechips, Inc. + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of GPL v2. + * + */ + +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include <asm/mach/map.h> + +#include <mach/tcc8k-regs.h> +#include <mach/irqs.h> + +#include "common.h" + +static u64 tcc8k_dmamask = DMA_BIT_MASK(32); + +#ifdef CONFIG_MTD_NAND_TCC +/* NAND controller */ +static struct resource tcc_nand_resources[] = { + { + .start = (resource_size_t)NFC_BASE, + .end = (resource_size_t)NFC_BASE + 0x7f, + .flags = IORESOURCE_MEM, + }, { + .start = INT_NFC, + .end = INT_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device tcc_nand_device = { + .name = "tcc_nand", + .id = 0, + .num_resources = ARRAY_SIZE(tcc_nand_resources), + .resource = tcc_nand_resources, +}; +#endif + +#ifdef CONFIG_MMC_TCC8K +/* MMC controller */ +static struct resource tcc8k_mmc0_resource[] = { + { + .start = INT_SD0, + .end = INT_SD0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource tcc8k_mmc1_resource[] = { + { + .start = INT_SD1, + .end = INT_SD1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device tcc8k_mmc0_device = { + .name = "tcc-mmc", + .id = 0, + .num_resources = ARRAY_SIZE(tcc8k_mmc0_resource), + .resource = tcc8k_mmc0_resource, + .dev = { + .dma_mask = &tcc8k_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +struct platform_device tcc8k_mmc1_device = { + .name = "tcc-mmc", + .id = 1, + .num_resources = ARRAY_SIZE(tcc8k_mmc1_resource), + .resource = tcc8k_mmc1_resource, + .dev = { + .dma_mask = &tcc8k_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +static inline void tcc8k_init_mmc(void) +{ + u32 reg = __raw_readl(GPIOPS_BASE + GPIOPS_FS1_OFFS); + + reg |= GPIOPS_FS1_SDH0_BITS | GPIOPS_FS1_SDH1_BITS; + __raw_writel(reg, GPIOPS_BASE + GPIOPS_FS1_OFFS); + + platform_device_register(&tcc8k_mmc0_device); + platform_device_register(&tcc8k_mmc1_device); +} +#else +static inline void tcc8k_init_mmc(void) { } +#endif + +#ifdef CONFIG_USB_OHCI_HCD +static int tcc8k_ohci_init(struct device *dev) +{ + u32 reg; + + /* Use GPIO PK19 as VBUS control output */ + reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS0_OFFS); + reg &= ~(1 << 19); + __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS0_OFFS); + reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS1_OFFS); + reg &= ~(1 << 19); + __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS1_OFFS); + + reg = __raw_readl(GPIOPK_BASE + GPIOPK_DOE_OFFS); + reg |= (1 << 19); + __raw_writel(reg, GPIOPK_BASE + GPIOPK_DOE_OFFS); + /* Turn on VBUS */ + reg = __raw_readl(GPIOPK_BASE + GPIOPK_DAT_OFFS); + reg |= (1 << 19); + __raw_writel(reg, GPIOPK_BASE + GPIOPK_DAT_OFFS); + + return 0; +} + +static struct resource tcc8k_ohci0_resources[] = { + [0] = { + .start = (resource_size_t)USBH0_BASE, + .end = (resource_size_t)USBH0_BASE + 0x5c, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_USBH0, + .end = INT_USBH0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource tcc8k_ohci1_resources[] = { + [0] = { + .start = (resource_size_t)USBH1_BASE, + .end = (resource_size_t)USBH1_BASE + 0x5c, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_USBH1, + .end = INT_USBH1, + .flags = IORESOURCE_IRQ, + } +}; + +static struct tccohci_platform_data tcc8k_ohci0_platform_data = { + .controller = 0, + .port_mode = PMM_PERPORT_MODE, + .init = tcc8k_ohci_init, +}; + +static struct tccohci_platform_data tcc8k_ohci1_platform_data = { + .controller = 1, + .port_mode = PMM_PERPORT_MODE, + .init = tcc8k_ohci_init, +}; + +static struct platform_device ohci0_device = { + .name = "tcc-ohci", + .id = 0, + .dev = { + .dma_mask = &tcc8k_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tcc8k_ohci0_platform_data, + }, + .num_resources = ARRAY_SIZE(tcc8k_ohci0_resources), + .resource = tcc8k_ohci0_resources, +}; + +static struct platform_device ohci1_device = { + .name = "tcc-ohci", + .id = 1, + .dev = { + .dma_mask = &tcc8k_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tcc8k_ohci1_platform_data, + }, + .num_resources = ARRAY_SIZE(tcc8k_ohci1_resources), + .resource = tcc8k_ohci1_resources, +}; + +static void __init tcc8k_init_usbhost(void) +{ + platform_device_register(&ohci0_device); + platform_device_register(&ohci1_device); +} +#else +static void __init tcc8k_init_usbhost(void) { } +#endif + +/* USB device controller*/ +#ifdef CONFIG_USB_GADGET_TCC8K +static struct resource udc_resources[] = { + [0] = { + .start = INT_USBD, + .end = INT_USBD, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = INT_UDMA, + .end = INT_UDMA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tcc8k_udc_device = { + .name = "tcc-udc", + .id = 0, + .resource = udc_resources, + .num_resources = ARRAY_SIZE(udc_resources), + .dev = { + .dma_mask = &tcc8k_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static void __init tcc8k_init_usb_gadget(void) +{ + platform_device_register(&tcc8k_udc_device); +} +#else +static void __init tcc8k_init_usb_gadget(void) { } +#endif /* CONFIG_USB_GADGET_TCC83X */ + +static int __init tcc8k_init_devices(void) +{ + tcc8k_init_mmc(); + tcc8k_init_usbhost(); + tcc8k_init_usb_gadget(); + return 0; +} + +arch_initcall(tcc8k_init_devices); diff --git a/arch/arm/mach-tcc8k/io.c b/arch/arm/mach-tcc8k/io.c new file mode 100644 index 000000000000..9b39d7fa658f --- /dev/null +++ b/arch/arm/mach-tcc8k/io.c @@ -0,0 +1,62 @@ +/* + * linux/arch/arm/mach-tcc8k/io.c + * + * (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * derived from TCC83xx io.c + * Copyright (C) Telechips, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> + +#include <asm/mach/map.h> + +#include <mach/tcc8k-regs.h> + +/* + * The machine specific code may provide the extra mapping besides the + * default mapping provided here. + */ +static struct map_desc tcc8k_io_desc[] __initdata = { + { + .virtual = (unsigned long)CS1_BASE_VIRT, + .pfn = __phys_to_pfn(CS1_BASE), + .length = CS1_SIZE, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)AHB_PERI_BASE_VIRT, + .pfn = __phys_to_pfn(AHB_PERI_BASE), + .length = AHB_PERI_SIZE, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)APB0_PERI_BASE_VIRT, + .pfn = __phys_to_pfn(APB0_PERI_BASE), + .length = APB0_PERI_SIZE, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)APB1_PERI_BASE_VIRT, + .pfn = __phys_to_pfn(APB1_PERI_BASE), + .length = APB1_PERI_SIZE, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)EXT_MEM_CTRL_BASE_VIRT, + .pfn = __phys_to_pfn(EXT_MEM_CTRL_BASE), + .length = EXT_MEM_CTRL_SIZE, + .type = MT_DEVICE, + }, +}; + +/* + * Maps common IO regions for tcc8k. + * + */ +void __init tcc8k_map_common_io(void) +{ + iotable_init(tcc8k_io_desc, ARRAY_SIZE(tcc8k_io_desc)); +} diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c new file mode 100644 index 000000000000..34575c4963f0 --- /dev/null +++ b/arch/arm/mach-tcc8k/irq.c @@ -0,0 +1,111 @@ +/* + * Copyright (C) Telechips, Inc. + * Copyright (C) 2009-2010 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GNU GPL version 2. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#include <asm/irq.h> +#include <asm/mach/irq.h> + +#include <mach/tcc8k-regs.h> +#include <mach/irqs.h> + +#include "common.h" + +/* Disable IRQ */ +static void tcc8000_mask_ack_irq0(unsigned int irq) +{ + PIC0_IEN &= ~(1 << irq); + PIC0_CREQ |= (1 << irq); +} + +static void tcc8000_mask_ack_irq1(unsigned int irq) +{ + PIC1_IEN &= ~(1 << (irq - 32)); + PIC1_CREQ |= (1 << (irq - 32)); +} + +static void tcc8000_mask_irq0(unsigned int irq) +{ + PIC0_IEN &= ~(1 << irq); +} + +static void tcc8000_mask_irq1(unsigned int irq) +{ + PIC1_IEN &= ~(1 << (irq - 32)); +} + +static void tcc8000_ack_irq0(unsigned int irq) +{ + PIC0_CREQ |= (1 << irq); +} + +static void tcc8000_ack_irq1(unsigned int irq) +{ + PIC1_CREQ |= (1 << (irq - 32)); +} + +/* Enable IRQ */ +static void tcc8000_unmask_irq0(unsigned int irq) +{ + PIC0_IEN |= (1 << irq); + PIC0_INTOEN |= (1 << irq); +} + +static void tcc8000_unmask_irq1(unsigned int irq) +{ + PIC1_IEN |= (1 << (irq - 32)); + PIC1_INTOEN |= (1 << (irq - 32)); +} + +static struct irq_chip tcc8000_irq_chip0 = { + .name = "tcc_irq0", + .mask = tcc8000_mask_irq0, + .ack = tcc8000_ack_irq0, + .mask_ack = tcc8000_mask_ack_irq0, + .unmask = tcc8000_unmask_irq0, +}; + +static struct irq_chip tcc8000_irq_chip1 = { + .name = "tcc_irq1", + .mask = tcc8000_mask_irq1, + .ack = tcc8000_ack_irq1, + .mask_ack = tcc8000_mask_ack_irq1, + .unmask = tcc8000_unmask_irq1, +}; + +void __init tcc8k_init_irq(void) +{ + int irqno; + + /* Mask and clear all interrupts */ + PIC0_IEN = 0x00000000; + PIC0_CREQ = 0xffffffff; + PIC1_IEN = 0x00000000; + PIC1_CREQ = 0xffffffff; + + PIC0_MEN0 = 0x00000003; + PIC1_MEN1 = 0x00000003; + PIC1_MEN = 0x00000003; + + /* let all IRQs be level triggered */ + PIC0_TMODE = 0xffffffff; + PIC1_TMODE = 0xffffffff; + /* all IRQs are IRQs (not FIQs) */ + PIC0_IRQSEL = 0xffffffff; + PIC1_IRQSEL = 0xffffffff; + + for (irqno = 0; irqno < NR_IRQS; irqno++) { + if (irqno < 32) + set_irq_chip(irqno, &tcc8000_irq_chip0); + else + set_irq_chip(irqno, &tcc8000_irq_chip1); + set_irq_handler(irqno, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } +} diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c new file mode 100644 index 000000000000..78d06008841d --- /dev/null +++ b/arch/arm/mach-tcc8k/time.c @@ -0,0 +1,149 @@ +/* + * TCC8000 system timer setup + * + * (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL version 2. + * + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> + +#include <asm/mach/time.h> + +#include <mach/tcc8k-regs.h> +#include <mach/irqs.h> + +#include "common.h" + +static void __iomem *timer_base; + +static cycle_t tcc_get_cycles(struct clocksource *cs) +{ + return __raw_readl(timer_base + TC32MCNT_OFFS); +} + +static struct clocksource clocksource_tcc = { + .name = "tcc_tc32", + .rating = 200, + .read = tcc_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 28, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int tcc_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long reg = __raw_readl(timer_base + TC32MCNT_OFFS); + + __raw_writel(reg + evt, timer_base + TC32CMP0_OFFS); + return 0; +} + +static void tcc_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long tc32irq; + + switch (mode) { + case CLOCK_EVT_MODE_ONESHOT: + tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS); + tc32irq |= TC32IRQ_IRQEN0; + __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS); + tc32irq &= ~TC32IRQ_IRQEN0; + __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS); + break; + case CLOCK_EVT_MODE_PERIODIC: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static irqreturn_t tcc8k_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* Acknowledge TC32 interrupt by reading TC32IRQ */ + __raw_readl(timer_base + TC32IRQ_OFFS); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct clock_event_device clockevent_tcc = { + .name = "tcc_timer1", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = tcc_set_mode, + .set_next_event = tcc_set_next_event, + .rating = 200, +}; + +static struct irqaction tcc8k_timer_irq = { + .name = "TC32_timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = tcc8k_timer_interrupt, + .dev_id = &clockevent_tcc, +}; + +static int __init tcc_clockevent_init(struct clk *clock) +{ + unsigned int c = clk_get_rate(clock); + + clocksource_tcc.mult = clocksource_hz2mult(c, + clocksource_tcc.shift); + clocksource_register(&clocksource_tcc); + + clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC, + clockevent_tcc.shift); + clockevent_tcc.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &clockevent_tcc); + clockevent_tcc.min_delta_ns = + clockevent_delta2ns(0xff, &clockevent_tcc); + + clockevent_tcc.cpumask = cpumask_of(0); + + clockevents_register_device(&clockevent_tcc); + + return 0; +} + +void __init tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq) +{ + u32 reg; + + timer_base = base; + tcc8k_timer_irq.irq = irq; + + /* Enable clocks */ + clk_enable(clock); + + /* Initialize 32-bit timer */ + reg = __raw_readl(timer_base + TC32EN_OFFS); + reg &= ~TC32EN_ENABLE; /* Disable timer */ + __raw_writel(reg, timer_base + TC32EN_OFFS); + /* Free running timer, counting from 0 to 0xffffffff */ + __raw_writel(0, timer_base + TC32EN_OFFS); + __raw_writel(0, timer_base + TC32LDV_OFFS); + reg = __raw_readl(timer_base + TC32IRQ_OFFS); + reg |= TC32IRQ_IRQEN0; /* irq at match with CMP0 */ + __raw_writel(reg, timer_base + TC32IRQ_OFFS); + + __raw_writel(TC32EN_ENABLE, timer_base + TC32EN_OFFS); + + tcc_clockevent_init(clock); + setup_irq(irq, &tcc8k_timer_irq); +} diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index 9e305de56be9..b9dbdb1289d0 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -115,8 +115,6 @@ static void __init tegra_harmony_init(void) MACHINE_START(HARMONY, "harmony") .boot_params = 0x00000100, - .phys_io = IO_APB_PHYS, - .io_pg_offst = ((IO_APB_VIRT) >> 18) & 0xfffc, .fixup = tegra_harmony_fixup, .init_irq = tegra_init_irq, .init_machine = tegra_harmony_init, diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index 55a39564b43c..8ea3bffb4e00 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -20,24 +20,28 @@ #include <mach/io.h> - .macro addruart,rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =IO_APB_PHYS @ physical - ldrne \rx, =IO_APB_VIRT @ virtual + .macro addruart, rp, rv + ldreq \rp, =IO_APB_PHYS @ physical + ldrne \rv, =IO_APB_VIRT @ virtual #if defined(CONFIG_TEGRA_DEBUG_UART_NONE) #error "A debug UART must be selected in the kernel config to use DEBUG_LL" #elif defined(CONFIG_TEGRA_DEBUG_UARTA) - orr \rx, \rx, #0x6000 + orr \rp, \rp, #0x6000 + orr \rv, \rv, #0x6000 #elif defined(CONFIG_TEGRA_DEBUG_UARTB) - ldr \tmp, =0x6040 - orr \rx, \rx, \tmp + orr \rp, \rp, #0x6000 + orr \rp, \rp, #0x40 + orr \rv, \rv, #0x6000 + orr \rv, \rv, #0x40 #elif defined(CONFIG_TEGRA_DEBUG_UARTC) - orr \rx, \rx, #0x6200 + orr \rp, \rp, #0x6200 + orr \rv, \rv, #0x6200 #elif defined(CONFIG_TEGRA_DEBUG_UARTD) - orr \rx, \rx, #0x6300 + orr \rp, \rp, #0x6300 + orr \rv, \rv, #0x6300 #elif defined(CONFIG_TEGRA_DEBUG_UARTE) - orr \rx, \rx, #0x6400 + orr \rp, \rp, #0x6400 + orr \rv, \rv, #0x6400 #endif .endm diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h index 8b42dab79a70..e4a34a35a544 100644 --- a/arch/arm/mach-tegra/include/mach/smp.h +++ b/arch/arm/mach-tegra/include/mach/smp.h @@ -1,16 +1,8 @@ #ifndef ASMARM_ARCH_SMP_H #define ASMARM_ARCH_SMP_H - #include <asm/hardware/gic.h> - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) +#include <asm/smp_mpidr.h> /* * We use IRQ1 as the IPI diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c index 5f55012b7c9e..03f793612594 100644 --- a/arch/arm/mach-u300/dummyspichip.c +++ b/arch/arm/mach-u300/dummyspichip.c @@ -46,7 +46,6 @@ static ssize_t dummy_looptest(struct device *dev, * struct, this is just used here to alter the behaviour of the chip * in order to perform tests. */ - struct pl022_config_chip *chip_info = spi->controller_data; int status; u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD, 0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05, @@ -72,7 +71,7 @@ static ssize_t dummy_looptest(struct device *dev, * Force chip to 8 bit mode * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC! */ - chip_info->data_size = SSP_DATA_BITS_8; + spi->bits_per_word = 8; /* You should NOT DO THIS EITHER */ spi->master->setup(spi); @@ -159,7 +158,7 @@ static ssize_t dummy_looptest(struct device *dev, * Force chip to 16 bit mode * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC! */ - chip_info->data_size = SSP_DATA_BITS_16; + spi->bits_per_word = 16; /* You should NOT DO THIS EITHER */ spi->master->setup(spi); diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S index 92c12420256f..df715707bead 100644 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ b/arch/arm/mach-u300/include/mach/debug-macro.S @@ -10,13 +10,12 @@ */ #include <mach/hardware.h> - .macro addruart, rx, tmp + .macro addruart, rp, rv /* If we move the address using MMU, use this. */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address - ldrne \rx, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address - orr \rx, \rx, #0x00003000 + ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address + ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address + orr \rp, \rp, #0x00003000 + orr \rv, \rv, #0x00003000 .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index f0e887bea30e..edb2c0d255c2 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -30,8 +30,6 @@ static void select_dummy_chip(u32 chipselect) } struct pl022_config_chip dummy_chip_info = { - /* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */ - .lbm = LOOPBACK_ENABLED, /* * available POLLING_TRANSFER and INTERRUPT_TRANSFER, * DMA_TRANSFER does not work @@ -42,14 +40,8 @@ struct pl022_config_chip dummy_chip_info = { .hierarchy = SSP_MASTER, /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ .slave_tx_disable = 0, - /* LSB first */ - .endian_tx = SSP_TX_LSB, - .endian_rx = SSP_RX_LSB, - .data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */ .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_SECOND_EDGE, - .clk_pol = SSP_CLK_POL_IDLE_LOW, .ctrl_len = SSP_BITS_12, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, @@ -75,7 +67,7 @@ static struct spi_board_info u300_spi_devices[] = { .bus_num = 0, /* Only one bus on this chip */ .chip_select = 0, /* Means SPI_CS_HIGH, change if e.g low CS */ - .mode = 0, + .mode = SPI_MODE_1 | SPI_LSB_FIRST | SPI_LOOP, }, #endif }; diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c index bfcda9820888..07c35a846424 100644 --- a/arch/arm/mach-u300/u300.c +++ b/arch/arm/mach-u300/u300.c @@ -61,8 +61,6 @@ static void __init u300_init_machine(void) MACHINE_START(U300, MACH_U300_STRING) /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ - .phys_io = U300_AHB_PER_PHYS_BASE, - .io_pg_offst = ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc, .boot_params = BOOT_PARAMS_OFFSET, .map_io = u300_map_io, .reserve = u300_reserve, diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 6625e5bbf4d6..2dd44a0b4615 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -21,9 +21,7 @@ config MACH_U8500_MOP bool "U8500 Development platform" select UX500_SOC_DB8500 help - Include support for mop500 development platform - based on U8500 architecture. The platform is based - on early drop silicon version of 8500. + Include support for the mop500 development platform. config MACH_U5500 bool "U5500 Development platform" @@ -39,4 +37,18 @@ config UX500_DEBUG_UART Choose the UART on which kernel low-level debug messages should be output. +config U5500_MODEM_IRQ + bool "Modem IRQ support" + depends on MACH_U5500 + default y + help + Add support for handling IRQ:s from modem side + +config U5500_MBOX + bool "Mailbox support" + depends on MACH_U5500 && U5500_MODEM_IRQ + default y + help + Add support for U5500 mailbox communication with modem side + endif diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 4556aea9c3c5..9e27a84433cb 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -4,8 +4,12 @@ obj-y := clock.o cpu.o devices.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o -obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o -obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o +obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o obj-$(CONFIG_MACH_U5500) += board-u5500.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +obj-$(CONFIG_REGULATOR_AB8500) += board-mop500-regulators.o +obj-$(CONFIG_U5500_MODEM_IRQ) += modem_irq.o +obj-$(CONFIG_U5500_MBOX) += mbox.o diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c new file mode 100644 index 000000000000..1187f1fc2e53 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * + * MOP500 board specific initialization for regulators + */ +#include <linux/kernel.h> +#include <linux/regulator/machine.h> + +/* supplies to the display/camera */ +static struct regulator_init_data ab8500_vaux1_regulator = { + .constraints = { + .name = "V-DISPLAY", + .min_uV = 2500000, + .max_uV = 2900000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE| + REGULATOR_CHANGE_STATUS, + }, +}; + +/* supplies to the on-board eMMC */ +static struct regulator_init_data ab8500_vaux2_regulator = { + .constraints = { + .name = "V-eMMC1", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE| + REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for VAUX3, supplies to SDcard slots */ +static struct regulator_init_data ab8500_vaux3_regulator = { + .constraints = { + .name = "V-MMC-SD", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE| + REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for tvout, gpadc, TVOUT LDO */ +static struct regulator_init_data ab8500_vtvout_init = { + .constraints = { + .name = "V-TVOUT", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for ab8500-vaudio, VAUDIO LDO */ +static struct regulator_init_data ab8500_vaudio_init = { + .constraints = { + .name = "V-AUD", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-anamic1 VAMic1-LDO */ +static struct regulator_init_data ab8500_vamic1_init = { + .constraints = { + .name = "V-AMIC1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ +static struct regulator_init_data ab8500_vamic2_init = { + .constraints = { + .name = "V-AMIC2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-dmic, VDMIC LDO */ +static struct regulator_init_data ab8500_vdmic_init = { + .constraints = { + .name = "V-DMIC", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-intcore12, VINTCORE12 LDO */ +static struct regulator_init_data ab8500_vintcore_init = { + .constraints = { + .name = "V-INTCORE", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for U8500 CSI/DSI, VANA LDO */ +static struct regulator_init_data ab8500_vana_init = { + .constraints = { + .name = "V-CSI/DSI", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c new file mode 100644 index 000000000000..bac995665b58 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -0,0 +1,91 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/amba/bus.h> +#include <linux/amba/mmci.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> + +#include <plat/pincfg.h> +#include <mach/devices.h> +#include <mach/hardware.h> + +#include "pins-db8500.h" +#include "board-mop500.h" + +static pin_cfg_t mop500_sdi_pins[] = { + /* SDI4 (on-board eMMC) */ + GPIO197_MC4_DAT3, + GPIO198_MC4_DAT2, + GPIO199_MC4_DAT1, + GPIO200_MC4_DAT0, + GPIO201_MC4_CMD, + GPIO202_MC4_FBCLK, + GPIO203_MC4_CLK, + GPIO204_MC4_DAT7, + GPIO205_MC4_DAT6, + GPIO206_MC4_DAT5, + GPIO207_MC4_DAT4, +}; + +static pin_cfg_t mop500_sdi2_pins[] = { + /* SDI2 (POP eMMC) */ + GPIO128_MC2_CLK, + GPIO129_MC2_CMD, + GPIO130_MC2_FBCLK, + GPIO131_MC2_DAT0, + GPIO132_MC2_DAT1, + GPIO133_MC2_DAT2, + GPIO134_MC2_DAT3, + GPIO135_MC2_DAT4, + GPIO136_MC2_DAT5, + GPIO137_MC2_DAT6, + GPIO138_MC2_DAT7, +}; + +/* + * SDI 2 (POP eMMC, not on DB8500ed) + */ + +static struct mmci_platform_data mop500_sdi2_data = { + .ocr_mask = MMC_VDD_165_195, + .f_max = 100000000, + .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .gpio_cd = -1, + .gpio_wp = -1, +}; + +/* + * SDI 4 (on-board eMMC) + */ + +static struct mmci_platform_data mop500_sdi4_data = { + .ocr_mask = MMC_VDD_29_30, + .f_max = 100000000, + .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED, + .gpio_cd = -1, + .gpio_wp = -1, +}; + +void mop500_sdi_init(void) +{ + nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins)); + + u8500_sdi2_device.dev.platform_data = &mop500_sdi2_data; + u8500_sdi4_device.dev.platform_data = &mop500_sdi4_data; + + if (!cpu_is_u8500ed()) { + nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins)); + amba_device_register(&u8500_sdi2_device, &iomem_resource); + } + + /* On-board eMMC */ + amba_device_register(&u8500_sdi4_device, &iomem_resource); +} diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 0e8fd135a57d..fcb587f825cc 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -28,8 +28,10 @@ #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> +#include <mach/irqs.h> #include "pins-db8500.h" +#include "board-mop500.h" static pin_cfg_t mop500_pins[] = { /* SSP0 */ @@ -55,19 +57,13 @@ static void ab4500_spi_cs_control(u32 command) } struct pl022_config_chip ab4500_chip_info = { - .lbm = LOOPBACK_DISABLED, .com_mode = INTERRUPT_TRANSFER, .iface = SSP_INTERFACE_MOTOROLA_SPI, /* we can act as master only */ .hierarchy = SSP_MASTER, .slave_tx_disable = 0, - .endian_rx = SSP_RX_MSB, - .endian_tx = SSP_TX_MSB, - .data_size = SSP_DATA_BITS_24, .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_SECOND_EDGE, - .clk_pol = SSP_CLK_POL_IDLE_HIGH, .cs_control = ab4500_spi_cs_control, }; @@ -75,15 +71,33 @@ static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, }; -static struct spi_board_info u8500_spi_devices[] = { +static struct resource ab8500_resources[] = { + [0] = { + .start = IRQ_AB8500, + .end = IRQ_AB8500, + .flags = IORESOURCE_IRQ + } +}; + +struct platform_device ab8500_device = { + .name = "ab8500-i2c", + .id = 0, + .dev = { + .platform_data = &ab8500_platdata, + }, + .num_resources = 1, + .resource = ab8500_resources, +}; + +static struct spi_board_info ab8500_spi_devices[] = { { - .modalias = "ab8500", + .modalias = "ab8500-spi", .controller_data = &ab4500_chip_info, .platform_data = &ab8500_platdata, .max_speed_hz = 12000000, .bus_num = 0, .chip_select = 0, - .mode = SPI_MODE_0, + .mode = SPI_MODE_3, .irq = IRQ_DB8500_AB8500, }, }; @@ -163,14 +177,18 @@ static void __init u8500_init_machine(void) platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - spi_register_board_info(u8500_spi_devices, - ARRAY_SIZE(u8500_spi_devices)); + mop500_sdi_init(); + + /* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */ + if (cpu_is_u8500ed() || cpu_is_u8500v10()) + spi_register_board_info(ab8500_spi_devices, + ARRAY_SIZE(ab8500_spi_devices)); + else /* If HW is v.1.1 or later use I2C to access AB8500 */ + platform_device_register(&ab8500_device); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */ - .phys_io = U8500_UART2_BASE, - .io_pg_offst = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc, .boot_params = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h new file mode 100644 index 000000000000..2d240322fa6f --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __BOARD_MOP500_H +#define __BOARD_MOP500_H + +extern void mop500_sdi_init(void); + +#endif diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 4430e69cf538..1ca094a45e71 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -31,8 +31,6 @@ static void __init u5500_init_machine(void) } MACHINE_START(U8500, "ST-Ericsson U5500 Platform") - .phys_io = UX500_UART0_BASE, - .io_pg_offst = (IO_ADDRESS(UX500_UART0_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = u5500_map_io, .init_irq = ux500_init_irq, diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index e9278f6d67aa..2f87075e9d6f 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -14,6 +14,7 @@ #include <mach/hardware.h> #include <mach/devices.h> #include <mach/setup.h> +#include <mach/irqs.h> static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), @@ -24,6 +25,90 @@ static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K), }; +static struct resource mbox0_resources[] = { + { + .name = "mbox_peer", + .start = U5500_MBOX0_PEER_START, + .end = U5500_MBOX0_PEER_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_local", + .start = U5500_MBOX0_LOCAL_START, + .end = U5500_MBOX0_LOCAL_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_irq", + .start = MBOX_PAIR0_VIRT_IRQ, + .end = MBOX_PAIR0_VIRT_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource mbox1_resources[] = { + { + .name = "mbox_peer", + .start = U5500_MBOX1_PEER_START, + .end = U5500_MBOX1_PEER_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_local", + .start = U5500_MBOX1_LOCAL_START, + .end = U5500_MBOX1_LOCAL_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_irq", + .start = MBOX_PAIR1_VIRT_IRQ, + .end = MBOX_PAIR1_VIRT_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource mbox2_resources[] = { + { + .name = "mbox_peer", + .start = U5500_MBOX2_PEER_START, + .end = U5500_MBOX2_PEER_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_local", + .start = U5500_MBOX2_LOCAL_START, + .end = U5500_MBOX2_LOCAL_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_irq", + .start = MBOX_PAIR2_VIRT_IRQ, + .end = MBOX_PAIR2_VIRT_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device mbox0_device = { + .id = 0, + .name = "mbox", + .resource = mbox0_resources, + .num_resources = ARRAY_SIZE(mbox0_resources), +}; + +static struct platform_device mbox1_device = { + .id = 1, + .name = "mbox", + .resource = mbox1_resources, + .num_resources = ARRAY_SIZE(mbox1_resources), +}; + +static struct platform_device mbox2_device = { + .id = 2, + .name = "mbox", + .resource = mbox2_resources, + .num_resources = ARRAY_SIZE(mbox2_resources), +}; + static struct platform_device *u5500_platform_devs[] __initdata = { &u5500_gpio_devs[0], &u5500_gpio_devs[1], @@ -33,6 +118,9 @@ static struct platform_device *u5500_platform_devs[] __initdata = { &u5500_gpio_devs[5], &u5500_gpio_devs[6], &u5500_gpio_devs[7], + &mbox0_device, + &mbox1_device, + &mbox2_device, }; void __init u5500_map_io(void) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index f21c444edd99..4acab7544b3c 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -38,10 +38,12 @@ static struct platform_device *platform_devs[] __initdata = { /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_io_desc[] __initdata = { __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), + __MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M), }; static struct map_desc u8500ed_io_desc[] __initdata = { @@ -53,6 +55,69 @@ static struct map_desc u8500v1_io_desc[] __initdata = { __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), }; +/* + * Functions to differentiate between later ASICs + * We look into the end of the ROM to locate the hardcoded ASIC ID. + * This is only needed to differentiate between minor revisions and + * process variants of an ASIC, the major revisions are encoded in + * the cpuid. + */ +#define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOT_ROM_BASE + 0x1FFF4) +#define U8500_ASIC_ID_LOC_V2 (U8500_BOOT_ROM_BASE + 0x1DBF4) +#define U8500_ASIC_REV_ED 0x01 +#define U8500_ASIC_REV_V10 0xA0 +#define U8500_ASIC_REV_V11 0xA1 +#define U8500_ASIC_REV_V20 0xB0 + +/** + * struct db8500_asic_id - fields of the ASIC ID + * @process: the manufacturing process, 0x40 is 40 nm + * 0x00 is "standard" + * @partnumber: hithereto 0x8500 for DB8500 + * @revision: version code in the series + * This field definion is not formally defined but makes + * sense. + */ +struct db8500_asic_id { + u8 process; + u16 partnumber; + u8 revision; +}; + +/* This isn't going to change at runtime */ +static struct db8500_asic_id db8500_id; + +static void __init get_db8500_asic_id(void) +{ + u32 asicid; + + if (cpu_is_u8500v1() || cpu_is_u8500ed()) + asicid = readl(__io_address(U8500_ASIC_ID_LOC_ED_V1)); + else if (cpu_is_u8500v2()) + asicid = readl(__io_address(U8500_ASIC_ID_LOC_V2)); + else + BUG(); + + db8500_id.process = (asicid >> 24); + db8500_id.partnumber = (asicid >> 16) & 0xFFFFU; + db8500_id.revision = asicid & 0xFFU; +} + +bool cpu_is_u8500v10(void) +{ + return (db8500_id.revision == U8500_ASIC_REV_V10); +} + +bool cpu_is_u8500v11(void) +{ + return (db8500_id.revision == U8500_ASIC_REV_V11); +} + +bool cpu_is_u8500v20(void) +{ + return (db8500_id.revision == U8500_ASIC_REV_V20); +} + void __init u8500_map_io(void) { ux500_map_io(); @@ -63,6 +128,9 @@ void __init u8500_map_io(void) iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc)); else iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc)); + + /* Read out the ASIC ID as early as we can */ + get_db8500_asic_id(); } /* @@ -70,6 +138,20 @@ void __init u8500_map_io(void) */ void __init u8500_init_devices(void) { + /* Display some ASIC boilerplate */ + pr_info("DB8500: process: %02x, revision ID: 0x%02x\n", + db8500_id.process, db8500_id.revision); + if (cpu_is_u8500ed()) + pr_info("DB8500: Early Drop (ED)\n"); + else if (cpu_is_u8500v10()) + pr_info("DB8500: version 1.0\n"); + else if (cpu_is_u8500v11()) + pr_info("DB8500: version 1.1\n"); + else if (cpu_is_u8500v20()) + pr_info("DB8500: version 2.0\n"); + else + pr_warning("ASIC: UNKNOWN SILICON VERSION!\n"); + ux500_init_devices(); if (cpu_is_u8500ed()) diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 9280d2561111..40032fecbc16 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -110,6 +110,82 @@ struct platform_device u8500_i2c4_device = { .num_resources = ARRAY_SIZE(u8500_i2c4_resources), }; +/* + * SD/MMC + */ + +struct amba_device u8500_sdi0_device = { + .dev = { + .init_name = "sdi0", + }, + .res = { + .start = U8500_SDI0_BASE, + .end = U8500_SDI0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC0, NO_IRQ}, +}; + +struct amba_device u8500_sdi1_device = { + .dev = { + .init_name = "sdi1", + }, + .res = { + .start = U8500_SDI1_BASE, + .end = U8500_SDI1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC1, NO_IRQ}, +}; + +struct amba_device u8500_sdi2_device = { + .dev = { + .init_name = "sdi2", + }, + .res = { + .start = U8500_SDI2_BASE, + .end = U8500_SDI2_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC2, NO_IRQ}, +}; + +struct amba_device u8500_sdi3_device = { + .dev = { + .init_name = "sdi3", + }, + .res = { + .start = U8500_SDI3_BASE, + .end = U8500_SDI3_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC3, NO_IRQ}, +}; + +struct amba_device u8500_sdi4_device = { + .dev = { + .init_name = "sdi4", + }, + .res = { + .start = U8500_SDI4_BASE, + .end = U8500_SDI4_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC4, NO_IRQ}, +}; + +struct amba_device u8500_sdi5_device = { + .dev = { + .init_name = "sdi5", + }, + .res = { + .start = U8500_SDI5_BASE, + .end = U8500_SDI5_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC5, NO_IRQ}, +}; + static struct resource dma40_resources[] = { [0] = { .start = U8500_DMA_BASE, @@ -170,23 +246,23 @@ struct stedma40_chan_cfg dma40_memcpy_conf_log = { * Mapping between destination event lines and physical device address. * The event line is tied to a device and therefor the address is constant. */ -static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV]; +static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV]; /* Mapping between source event lines and physical device address */ -static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV]; +static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV]; /* Reserved event lines for memcpy only */ static int dma40_memcpy_event[] = { - STEDMA40_MEMCPY_TX_0, - STEDMA40_MEMCPY_TX_1, - STEDMA40_MEMCPY_TX_2, - STEDMA40_MEMCPY_TX_3, - STEDMA40_MEMCPY_TX_4, - STEDMA40_MEMCPY_TX_5, + DB8500_DMA_MEMCPY_TX_0, + DB8500_DMA_MEMCPY_TX_1, + DB8500_DMA_MEMCPY_TX_2, + DB8500_DMA_MEMCPY_TX_3, + DB8500_DMA_MEMCPY_TX_4, + DB8500_DMA_MEMCPY_TX_5, }; static struct stedma40_platform_data dma40_plat_data = { - .dev_len = STEDMA40_NR_DEV, + .dev_len = DB8500_DMA_NR_DEV, .dev_rx = dma40_rx_map, .dev_tx = dma40_tx_map, .memcpy = dma40_memcpy_event, diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c new file mode 100644 index 000000000000..b782a03024be --- /dev/null +++ b/arch/arm/mach-ux500/hotplug.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Based on ARM realview platform + * + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> +#include <linux/completion.h> + +#include <asm/cacheflush.h> + +extern volatile int pen_release; + +static DECLARE_COMPLETION(cpu_killed); + +static inline void platform_do_lowpower(unsigned int cpu) +{ + flush_cache_all(); + + /* we put the platform to just WFI */ + for (;;) { + __asm__ __volatile__("dsb\n\t" "wfi\n\t" + : : : "memory"); + if (pen_release == cpu) { + /* + * OK, proper wakeup, we're done + */ + break; + } + } +} + +int platform_cpu_kill(unsigned int cpu) +{ + return wait_for_completion_timeout(&cpu_killed, 5000); +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void platform_cpu_die(unsigned int cpu) +{ +#ifdef DEBUG + unsigned int this_cpu = hard_smp_processor_id(); + + if (cpu != this_cpu) { + printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n", + this_cpu, cpu); + BUG(); + } +#endif + + printk(KERN_NOTICE "CPU%u: shutdown\n", cpu); + complete(&cpu_killed); + + /* directly enter low power state, skipping secure registers */ + platform_do_lowpower(cpu); +} + +int platform_cpu_disable(unsigned int cpu) +{ + /* + * we don't allow CPU 0 to be shutdown (it is still too special + * e.g. clock tick interrupts) + */ + return cpu == 0 ? -EPERM : 0; +} diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h index 545c80fc8024..3eafc0e24ba5 100644 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -100,4 +100,18 @@ #define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80) #define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100) +#define U5500_MBOX_BASE (U5500_MODEM_BASE + 0xFFD1000) +#define U5500_MBOX0_PEER_START (U5500_MBOX_BASE + 0x40) +#define U5500_MBOX0_PEER_END (U5500_MBOX_BASE + 0x5F) +#define U5500_MBOX0_LOCAL_START (U5500_MBOX_BASE + 0x60) +#define U5500_MBOX0_LOCAL_END (U5500_MBOX_BASE + 0x7F) +#define U5500_MBOX1_PEER_START (U5500_MBOX_BASE + 0x80) +#define U5500_MBOX1_PEER_END (U5500_MBOX_BASE + 0x9F) +#define U5500_MBOX1_LOCAL_START (U5500_MBOX_BASE + 0xA0) +#define U5500_MBOX1_LOCAL_END (U5500_MBOX_BASE + 0xBF) +#define U5500_MBOX2_PEER_START (U5500_MBOX_BASE + 0x00) +#define U5500_MBOX2_PEER_END (U5500_MBOX_BASE + 0x1F) +#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) +#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) + #endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index f000218210c9..f07d0986409d 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -30,8 +30,6 @@ #define U8500_ICN_BASE 0x81000000 #define U8500_BOOT_ROM_BASE 0x90000000 -/* ASIC ID is at 0xff4 offset within this region */ -#define U8500_ASIC_ID_BASE 0x9001F000 #define U8500_PER6_BASE 0xa03c0000 #define U8500_PER5_BASE 0xa03e0000 diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index c5203b7ea552..be7c0f14e310 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -18,11 +18,9 @@ #define UX500_UART(n) __UX500_UART(n) #define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =UART_BASE @ no, physical address - ldrne \rx, =IO_ADDRESS(UART_BASE) @ yes, virtual address + .macro addruart, rp, rv + ldr \rp, =UART_BASE @ no, physical address + ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index c2b2f2574947..33a120c2e82e 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -27,6 +27,13 @@ extern struct platform_device u8500_i2c0_device; extern struct platform_device u8500_i2c4_device; extern struct platform_device u8500_dma40_device; +extern struct amba_device u8500_sdi0_device; +extern struct amba_device u8500_sdi1_device; +extern struct amba_device u8500_sdi2_device; +extern struct amba_device u8500_sdi3_device; +extern struct amba_device u8500_sdi4_device; +extern struct amba_device u8500_sdi5_device; + void dma40_u8500ed_fixup(void); #endif diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 8656379a8309..32e883a8f2a2 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -104,16 +104,35 @@ static inline bool cpu_is_u8500(void) #endif } +#define CPUID_DB8500ED 0x410fc090 +#define CPUID_DB8500V1 0x411fc091 +#define CPUID_DB8500V2 0x412fc091 + static inline bool cpu_is_u8500ed(void) { - return cpu_is_u8500() && (read_cpuid_id() & 15) == 0; + return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500ED); } static inline bool cpu_is_u8500v1(void) { - return cpu_is_u8500() && (read_cpuid_id() & 15) == 1; + return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V1); +} + +static inline bool cpu_is_u8500v2(void) +{ + return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V2); } +#ifdef CONFIG_UX500_SOC_DB8500 +bool cpu_is_u8500v10(void); +bool cpu_is_u8500v11(void); +bool cpu_is_u8500v20(void); +#else +static inline bool cpu_is_u8500v10(void) { return false; } +static inline bool cpu_is_u8500v11(void) { return false; } +static inline bool cpu_is_u8500v20(void) { return false; } +#endif + static inline bool cpu_is_u5500(void) { #ifdef CONFIG_UX500_SOC_DB5500 diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h index 6fbfe5e2065a..bfa123dbec3b 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h @@ -61,6 +61,7 @@ #define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60) #define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61) #define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63) +#define IRQ_DB5500_MODEM (IRQ_SHPI_START + 65) #define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96) #define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98) #define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101) diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 10385bdc2b77..693aa57de88d 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -40,7 +40,8 @@ #define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) #define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) #define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) -#define IRQ_AB4500 (IRQ_SHPI_START + 40) +#define IRQ_AB8500 (IRQ_SHPI_START + 40) +#define IRQ_PRCMU (IRQ_SHPI_START + 47) #define IRQ_DISP (IRQ_SHPI_START + 48) #define IRQ_SiPI3 (IRQ_SHPI_START + 49) #define IRQ_I2C4 (IRQ_SHPI_START + 51) @@ -83,6 +84,19 @@ #include <mach/irqs-board-mop500.h> #endif -#define NR_IRQS IRQ_BOARD_END +/* + * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual + * IRQ:s representing modem IRQ:s can be allocated + */ +#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1) +#define IRQ_MODEM_EVENTS_NBR 72 +#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) + +/* List of virtual IRQ:s that are allocated from the range above */ +#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) +#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) +#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) + +#define NR_IRQS IRQ_MODEM_EVENTS_END #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/mbox.h b/arch/arm/mach-ux500/include/mach/mbox.h new file mode 100644 index 000000000000..7f9da4d2fbda --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/mbox.h @@ -0,0 +1,88 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. + * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __INC_STE_MBOX_H +#define __INC_STE_MBOX_H + +#define MBOX_BUF_SIZE 16 +#define MBOX_NAME_SIZE 8 + +/** + * mbox_recv_cb_t - Definition of the mailbox callback. + * @mbox_msg: The mailbox message. + * @priv: The clients private data as specified in the call to mbox_setup. + * + * This function will be called upon reception of new mailbox messages. + */ +typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv); + +/** + * struct mbox - Mailbox instance struct + * @list: Linked list head. + * @pdev: Pointer to device struct. + * @cb: Callback function. Will be called + * when new data is received. + * @client_data: Clients private data. Will be sent back + * in the callback function. + * @virtbase_peer: Virtual address for outgoing mailbox. + * @virtbase_local: Virtual address for incoming mailbox. + * @buffer: Then internal queue for outgoing messages. + * @name: Name of this mailbox. + * @buffer_available: Completion variable to achieve "blocking send". + * This variable will be signaled when there is + * internal buffer space available. + * @client_blocked: To keep track if any client is currently + * blocked. + * @lock: Spinlock to protect this mailbox instance. + * @write_index: Index in internal buffer to write to. + * @read_index: Index in internal buffer to read from. + * @allocated: Indicates whether this particular mailbox + * id has been allocated by someone. + */ +struct mbox { + struct list_head list; + struct platform_device *pdev; + mbox_recv_cb_t *cb; + void *client_data; + void __iomem *virtbase_peer; + void __iomem *virtbase_local; + u32 buffer[MBOX_BUF_SIZE]; + char name[MBOX_NAME_SIZE]; + struct completion buffer_available; + u8 client_blocked; + spinlock_t lock; + u8 write_index; + u8 read_index; + bool allocated; +}; + +/** + * mbox_setup - Set up a mailbox and return its instance. + * @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU, + * 2 for modem DSP. + * @mbox_cb: Pointer to the callback function to be called when a new message + * is received. + * @priv: Client user data which will be returned in the callback. + * + * Returns a mailbox instance to be specified in subsequent calls to mbox_send. + */ +struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv); + +/** + * mbox_send - Send a mailbox message. + * @mbox: Mailbox instance (returned by mbox_setup) + * @mbox_msg: The mailbox message to send. + * @block: Specifies whether this call will block until send is possible, + * or return an error if the mailbox buffer is full. + * + * Returns 0 on success or a negative error code on error. -ENOMEM indicates + * that the internal buffer is full and you have to try again later (or + * specify "block" in order to block until send is possible). + */ +int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block); + +#endif /*INC_STE_MBOX_H*/ diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h new file mode 100644 index 000000000000..8885f39a6421 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h @@ -0,0 +1,91 @@ +/* + * Copyright (c) 2009 ST-Ericsson SA + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ +#ifndef __MACH_PRCMU_REGS_H +#define __MACH_PRCMU_REGS_H + +#include <mach/hardware.h> + +#define _PRCMU_BASE IO_ADDRESS(U8500_PRCMU_BASE) + +#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) +#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) +#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) +#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0) +#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4) +#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0) +#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c) +#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308) + +/* ARM WFI Standby signal register */ +#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) +#define PRCMU_IOCR (_PRCMU_BASE + 0x310) + +/* CPU mailbox registers */ +#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc) +#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100) +#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104) + +/* Dual A9 core interrupt management unit registers */ +#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328) +#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c) +#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c) +#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120) +#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124) +#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128) +#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C) +#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260) +#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264) +#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268) +#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C) + +#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334) +#define ARM_WAKEUP_MODEM 0x1 + +#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C) +#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494) +#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174) + +#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148) +#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150) +#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158) +#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160) +#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168) +#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484) +#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488) +#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018) + +/* System reset register */ +#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) + +/* Level shifter and clamp control registers */ +#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) +#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) + +/* PRCMU clock/PLL/reset registers */ +#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) +#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) +#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044) +#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064) +#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058) +#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c) +#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) +#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) +#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) +#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) + +/* ePOD and memory power signal control registers */ +#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410) +#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304) + +/* Debug power control unit registers */ +#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254) + +/* Miscellaneous unit registers */ +#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) + +#endif /* __MACH_PRCMU__REGS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h new file mode 100644 index 000000000000..549843ff6dbe --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/prcmu.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * PRCMU f/w APIs + */ +#ifndef __MACH_PRCMU_H +#define __MACH_PRCMU_H + +int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); + +#endif /* __MACH_PRCMU_H */ diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index e978dbd9e210..54bbe648bf58 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -38,4 +38,11 @@ extern struct sys_timer ux500_timer; .type = MT_DEVICE, \ } +#define __MEM_DEV_DESC(x, sz) { \ + .virtual = IO_ADDRESS(x), \ + .pfn = __phys_to_pfn(x), \ + .length = sz, \ + .type = MT_MEMORY, \ +} + #endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h index b59f7bc9725d..197e8417375e 100644 --- a/arch/arm/mach-ux500/include/mach/smp.h +++ b/arch/arm/mach-ux500/include/mach/smp.h @@ -10,18 +10,11 @@ #define ASMARM_ARCH_SMP_H #include <asm/hardware/gic.h> +#include <asm/smp_mpidr.h> /* This is required to wakeup the secondary core */ extern void u8500_secondary_startup(void); -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) - /* * We use IRQ1 as the IPI */ diff --git a/arch/arm/mach-ux500/mbox.c b/arch/arm/mach-ux500/mbox.c new file mode 100644 index 000000000000..63435389c544 --- /dev/null +++ b/arch/arm/mach-ux500/mbox.c @@ -0,0 +1,567 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. + * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2. + */ + +/* + * Mailbox nomenclature: + * + * APE MODEM + * mbox pairX + * .......................... + * . . + * . peer . + * . send ---- . + * . --> | | . + * . | | . + * . ---- . + * . . + * . local . + * . rec ---- . + * . | | <-- . + * . | | . + * . ---- . + * ......................... + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/completion.h> +#include <mach/mbox.h> + +#define MBOX_NAME "mbox" + +#define MBOX_FIFO_DATA 0x000 +#define MBOX_FIFO_ADD 0x004 +#define MBOX_FIFO_REMOVE 0x008 +#define MBOX_FIFO_THRES_FREE 0x00C +#define MBOX_FIFO_THRES_OCCUP 0x010 +#define MBOX_FIFO_STATUS 0x014 + +#define MBOX_DISABLE_IRQ 0x4 +#define MBOX_ENABLE_IRQ 0x0 +#define MBOX_LATCH 1 + +/* Global list of all mailboxes */ +static struct list_head mboxs = LIST_HEAD_INIT(mboxs); + +static struct mbox *get_mbox_with_id(u8 id) +{ + u8 i; + struct list_head *pos = &mboxs; + for (i = 0; i <= id; i++) + pos = pos->next; + + return (struct mbox *) list_entry(pos, struct mbox, list); +} + +int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block) +{ + int res = 0; + + spin_lock(&mbox->lock); + + dev_dbg(&(mbox->pdev->dev), + "About to buffer 0x%X to mailbox 0x%X." + " ri = %d, wi = %d\n", + mbox_msg, (u32)mbox, mbox->read_index, + mbox->write_index); + + /* Check if write buffer is full */ + while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) { + if (!block) { + dev_dbg(&(mbox->pdev->dev), + "Buffer full in non-blocking call! " + "Returning -ENOMEM!\n"); + res = -ENOMEM; + goto exit; + } + spin_unlock(&mbox->lock); + dev_dbg(&(mbox->pdev->dev), + "Buffer full in blocking call! Sleeping...\n"); + mbox->client_blocked = 1; + wait_for_completion(&mbox->buffer_available); + dev_dbg(&(mbox->pdev->dev), + "Blocking send was woken up! Trying again...\n"); + spin_lock(&mbox->lock); + } + + mbox->buffer[mbox->write_index] = mbox_msg; + mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE; + + /* + * Indicate that we want an IRQ as soon as there is a slot + * in the FIFO + */ + writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + +exit: + spin_unlock(&mbox->lock); + return res; +} +EXPORT_SYMBOL(mbox_send); + +#if defined(CONFIG_DEBUG_FS) +/* + * Expected input: <value> <nbr sends> + * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times + */ +static ssize_t mbox_write_fifo(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + unsigned long mbox_mess; + unsigned long nbr_sends; + unsigned long i; + char int_buf[16]; + char *token; + char *val; + + struct mbox *mbox = (struct mbox *) dev->platform_data; + + strncpy((char *) &int_buf, buf, sizeof(int_buf)); + token = (char *) &int_buf; + + /* Parse message */ + val = strsep(&token, " "); + if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0)) + mbox_mess = 0xDEADBEEF; + + val = strsep(&token, " "); + if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0)) + nbr_sends = 1; + + dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n", + mbox_mess, nbr_sends, (u32) mbox); + + for (i = 0; i < nbr_sends; i++) + mbox_send(mbox, mbox_mess, true); + + return count; +} + +static ssize_t mbox_read_fifo(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int mbox_value; + struct mbox *mbox = (struct mbox *) dev->platform_data; + + if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0) + return sprintf(buf, "Mailbox is empty\n"); + + mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); + writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); + + return sprintf(buf, "0x%X\n", mbox_value); +} + +static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo); + +static int mbox_show(struct seq_file *s, void *data) +{ + struct list_head *pos; + u8 mbox_index = 0; + + list_for_each(pos, &mboxs) { + struct mbox *m = + (struct mbox *) list_entry(pos, struct mbox, list); + if (m == NULL) { + seq_printf(s, + "Unable to retrieve mailbox %d\n", + mbox_index); + continue; + } + + spin_lock(&m->lock); + if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) { + seq_printf(s, "MAILBOX %d not setup or corrupt\n", + mbox_index); + spin_unlock(&m->lock); + continue; + } + + seq_printf(s, + "===========================\n" + " MAILBOX %d\n" + " PEER MAILBOX DUMP\n" + "---------------------------\n" + "FIFO: 0x%X (%d)\n" + "Free Threshold: 0x%.2X (%d)\n" + "Occupied Threshold: 0x%.2X (%d)\n" + "Status: 0x%.2X (%d)\n" + " Free spaces (ot): %d (%d)\n" + " Occup spaces (ot): %d (%d)\n" + "===========================\n" + " LOCAL MAILBOX DUMP\n" + "---------------------------\n" + "FIFO: 0x%.X (%d)\n" + "Free Threshold: 0x%.2X (%d)\n" + "Occupied Threshold: 0x%.2X (%d)\n" + "Status: 0x%.2X (%d)\n" + " Free spaces (ot): %d (%d)\n" + " Occup spaces (ot): %d (%d)\n" + "===========================\n" + "write_index: %d\n" + "read_index : %d\n" + "===========================\n" + "\n", + mbox_index, + readl(m->virtbase_peer + MBOX_FIFO_DATA), + readl(m->virtbase_peer + MBOX_FIFO_DATA), + readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_peer + MBOX_FIFO_STATUS), + readl(m->virtbase_peer + MBOX_FIFO_STATUS), + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7, + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1, + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7, + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1, + readl(m->virtbase_local + MBOX_FIFO_DATA), + readl(m->virtbase_local + MBOX_FIFO_DATA), + readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_local + MBOX_FIFO_STATUS), + readl(m->virtbase_local + MBOX_FIFO_STATUS), + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7, + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1, + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7, + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1, + m->write_index, m->read_index); + mbox_index++; + spin_unlock(&m->lock); + } + + return 0; +} + +static int mbox_open(struct inode *inode, struct file *file) +{ + return single_open(file, mbox_show, NULL); +} + +static const struct file_operations mbox_operations = { + .owner = THIS_MODULE, + .open = mbox_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + +static irqreturn_t mbox_irq(int irq, void *arg) +{ + u32 mbox_value; + int nbr_occup; + int nbr_free; + struct mbox *mbox = (struct mbox *) arg; + + spin_lock(&mbox->lock); + + dev_dbg(&(mbox->pdev->dev), + "mbox IRQ [%d] received. ri = %d, wi = %d\n", + irq, mbox->read_index, mbox->write_index); + + /* + * Check if we have any outgoing messages, and if there is space for + * them in the FIFO. + */ + if (mbox->read_index != mbox->write_index) { + /* + * Check by reading FREE for LOCAL since that indicates + * OCCUP for PEER + */ + nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS) + >> 4) & 0x7; + dev_dbg(&(mbox->pdev->dev), + "Status indicates %d empty spaces in the FIFO!\n", + nbr_free); + + while ((nbr_free > 0) && + (mbox->read_index != mbox->write_index)) { + /* Write the message and latch it into the FIFO */ + writel(mbox->buffer[mbox->read_index], + (mbox->virtbase_peer + MBOX_FIFO_DATA)); + writel(MBOX_LATCH, + (mbox->virtbase_peer + MBOX_FIFO_ADD)); + dev_dbg(&(mbox->pdev->dev), + "Wrote message 0x%X to addr 0x%X\n", + mbox->buffer[mbox->read_index], + (u32) (mbox->virtbase_peer + MBOX_FIFO_DATA)); + + nbr_free--; + mbox->read_index = + (mbox->read_index + 1) % MBOX_BUF_SIZE; + } + + /* + * Check if we still want IRQ:s when there is free + * space to send + */ + if (mbox->read_index != mbox->write_index) { + dev_dbg(&(mbox->pdev->dev), + "Still have messages to send, but FIFO full. " + "Request IRQ again!\n"); + writel(MBOX_ENABLE_IRQ, + mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + } else { + dev_dbg(&(mbox->pdev->dev), + "No more messages to send. " + "Do not request IRQ again!\n"); + writel(MBOX_DISABLE_IRQ, + mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + } + + /* + * Check if we can signal any blocked clients that it is OK to + * start buffering again + */ + if (mbox->client_blocked && + (((mbox->write_index + 1) % MBOX_BUF_SIZE) + != mbox->read_index)) { + dev_dbg(&(mbox->pdev->dev), + "Waking up blocked client\n"); + complete(&mbox->buffer_available); + mbox->client_blocked = 0; + } + } + + /* Check if we have any incoming messages */ + nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7; + if (nbr_occup == 0) + goto exit; + + if (mbox->cb == NULL) { + dev_dbg(&(mbox->pdev->dev), "No receive callback registered, " + "leaving %d incoming messages in fifo!\n", nbr_occup); + goto exit; + } + + /* Read and acknowledge the message */ + mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); + writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); + + /* Notify consumer of new mailbox message */ + dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n", + mbox_value); + mbox->cb(mbox_value, mbox->client_data); + +exit: + dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n", + mbox->read_index, mbox->write_index); + spin_unlock(&mbox->lock); + + return IRQ_HANDLED; +} + +/* Setup is executed once for each mbox pair */ +struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv) +{ + struct resource *resource; + int irq; + int res; + struct mbox *mbox; + + mbox = get_mbox_with_id(mbox_id); + if (mbox == NULL) { + dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n", + mbox_id); + goto exit; + } + + /* + * Check if mailbox has been allocated to someone else, + * otherwise allocate it + */ + if (mbox->allocated) { + dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n", + mbox_id); + mbox = NULL; + goto exit; + } + mbox->allocated = true; + + dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n", + mbox_id, (u32)mbox); + + mbox->client_data = priv; + mbox->cb = mbox_cb; + + /* Get addr for peer mailbox and ioremap it */ + resource = platform_get_resource_byname(mbox->pdev, + IORESOURCE_MEM, + "mbox_peer"); + if (resource == NULL) { + dev_err(&(mbox->pdev->dev), + "Unable to retrieve mbox peer resource\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "Resource name: %s start: 0x%X, end: 0x%X\n", + resource->name, resource->start, resource->end); + mbox->virtbase_peer = + ioremap(resource->start, resource->end - resource->start); + if (!mbox->virtbase_peer) { + dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n", + resource->start, resource->end, (u32) mbox->virtbase_peer); + + /* Get addr for local mailbox and ioremap it */ + resource = platform_get_resource_byname(mbox->pdev, + IORESOURCE_MEM, + "mbox_local"); + if (resource == NULL) { + dev_err(&(mbox->pdev->dev), + "Unable to retrieve mbox local resource\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "Resource name: %s start: 0x%X, end: 0x%X\n", + resource->name, resource->start, resource->end); + mbox->virtbase_local = + ioremap(resource->start, resource->end - resource->start); + if (!mbox->virtbase_local) { + dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n", + resource->start, resource->end, (u32) mbox->virtbase_peer); + + init_completion(&mbox->buffer_available); + mbox->client_blocked = 0; + + /* Get IRQ for mailbox and allocate it */ + irq = platform_get_irq_byname(mbox->pdev, "mbox_irq"); + if (irq < 0) { + dev_err(&(mbox->pdev->dev), + "Unable to retrieve mbox irq resource\n"); + mbox = NULL; + goto exit; + } + + dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq); + res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox); + if (res < 0) { + dev_err(&(mbox->pdev->dev), + "Unable to allocate mbox irq %d\n", irq); + mbox = NULL; + goto exit; + } + + /* Set up mailbox to not launch IRQ on free space in mailbox */ + writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + + /* + * Set up mailbox to launch IRQ on new message if we have + * a callback set. If not, do not raise IRQ, but keep message + * in FIFO for manual retrieval + */ + if (mbox_cb != NULL) + writel(MBOX_ENABLE_IRQ, + mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); + else + writel(MBOX_DISABLE_IRQ, + mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); + +#if defined(CONFIG_DEBUG_FS) + res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo); + if (res != 0) + dev_warn(&(mbox->pdev->dev), + "Unable to create mbox sysfs entry"); + + (void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL, + NULL, &mbox_operations); +#endif + + dev_info(&(mbox->pdev->dev), + "Mailbox driver with index %d initated!\n", mbox_id); + +exit: + return mbox; +} +EXPORT_SYMBOL(mbox_setup); + + +int __init mbox_probe(struct platform_device *pdev) +{ + struct mbox local_mbox; + struct mbox *mbox; + int res = 0; + dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev); + + memset(&local_mbox, 0x0, sizeof(struct mbox)); + + /* Associate our mbox data with the platform device */ + res = platform_device_add_data(pdev, + (void *) &local_mbox, + sizeof(struct mbox)); + if (res != 0) { + dev_err(&(pdev->dev), + "Unable to allocate driver platform data!\n"); + goto exit; + } + + mbox = (struct mbox *) pdev->dev.platform_data; + mbox->pdev = pdev; + mbox->write_index = 0; + mbox->read_index = 0; + + INIT_LIST_HEAD(&(mbox->list)); + list_add_tail(&(mbox->list), &mboxs); + + sprintf(mbox->name, "%s", MBOX_NAME); + spin_lock_init(&mbox->lock); + + dev_info(&(pdev->dev), "Mailbox driver loaded\n"); + +exit: + return res; +} + +static struct platform_driver mbox_driver = { + .driver = { + .name = MBOX_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init mbox_init(void) +{ + return platform_driver_probe(&mbox_driver, mbox_probe); +} + +module_init(mbox_init); + +void __exit mbox_exit(void) +{ + platform_driver_unregister(&mbox_driver); +} + +module_exit(mbox_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MBOX driver"); diff --git a/arch/arm/mach-ux500/modem_irq.c b/arch/arm/mach-ux500/modem_irq.c new file mode 100644 index 000000000000..3187f8871169 --- /dev/null +++ b/arch/arm/mach-ux500/modem_irq.c @@ -0,0 +1,139 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. + * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/slab.h> + +#define MODEM_INTCON_BASE_ADDR 0xBFFD3000 +#define MODEM_INTCON_SIZE 0xFFF + +#define DEST_IRQ41_OFFSET 0x2A4 +#define DEST_IRQ43_OFFSET 0x2AC +#define DEST_IRQ45_OFFSET 0x2B4 + +#define PRIO_IRQ41_OFFSET 0x6A4 +#define PRIO_IRQ43_OFFSET 0x6AC +#define PRIO_IRQ45_OFFSET 0x6B4 + +#define ALLOW_IRQ_OFFSET 0x104 + +#define MODEM_INTCON_CPU_NBR 0x1 +#define MODEM_INTCON_PRIO_HIGH 0x0 + +#define MODEM_INTCON_ALLOW_IRQ41 0x0200 +#define MODEM_INTCON_ALLOW_IRQ43 0x0800 +#define MODEM_INTCON_ALLOW_IRQ45 0x2000 + +#define MODEM_IRQ_REG_OFFSET 0x4 + +struct modem_irq { + void __iomem *modem_intcon_base; +}; + + +static void setup_modem_intcon(void __iomem *modem_intcon_base) +{ + /* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */ + writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET); + writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET); + writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET); + + /* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */ + writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET); + writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET); + writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET); + + /* IC_ALLOW_ARRAY - IRQ enable */ + writel(MODEM_INTCON_ALLOW_IRQ41 | + MODEM_INTCON_ALLOW_IRQ43 | + MODEM_INTCON_ALLOW_IRQ45, + modem_intcon_base + ALLOW_IRQ_OFFSET); +} + +static irqreturn_t modem_cpu_irq_handler(int irq, void *data) +{ + int real_irq; + int virt_irq; + struct modem_irq *mi = (struct modem_irq *)data; + + /* Read modem side IRQ number from modem IRQ controller */ + real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF; + virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq; + + pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X " + "which will be 0x%X (%d) which translates to " + "virtual IRQ 0x%X (%d)!\n", + (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET, + real_irq, + real_irq & 0xFF, + real_irq & 0xFF, + virt_irq, + virt_irq); + + if (virt_irq != 0) + generic_handle_irq(virt_irq); + + pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq); + + return IRQ_HANDLED; +} + +static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip) +{ + set_irq_chip(irq, modem_irq_chip); + set_irq_handler(irq, handle_simple_irq); + set_irq_flags(irq, IRQF_VALID); + + pr_debug("modem_irq: Created virtual IRQ %d\n", irq); +} + +static int modem_irq_init(void) +{ + int err; + static struct irq_chip modem_irq_chip; + struct modem_irq *mi; + + pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n", + IRQ_DB5500_MODEM); + + mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL); + if (!mi) { + pr_err("modem_irq: Could not allocate device\n"); + return -ENOMEM; + } + + mi->modem_intcon_base = + ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE); + pr_debug("modem_irq: ioremapped modem_intcon_base from " + "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR, + (u32)mi->modem_intcon_base); + + setup_modem_intcon(mi->modem_intcon_base); + + modem_irq_chip = dummy_irq_chip; + modem_irq_chip.name = "modem_irq"; + + /* Create the virtual IRQ:s needed */ + create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip); + create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip); + create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip); + + err = request_threaded_irq(IRQ_DB5500_MODEM, NULL, + modem_cpu_irq_handler, IRQF_ONESHOT, + "modem_irq", mi); + if (err) + pr_err("modem_irq: Could not register IRQ %d\n", + IRQ_DB5500_MODEM); + + return 0; +} + +arch_initcall(modem_irq_init); diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h new file mode 100644 index 000000000000..bf50c21fe69d --- /dev/null +++ b/arch/arm/mach-ux500/pins-db5500.h @@ -0,0 +1,620 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + */ + +#ifndef __MACH_DB5500_PINS_H +#define __MACH_DB5500_PINS_H + +#define GPIO0_GPIO PIN_CFG(0, GPIO) +#define GPIO0_SM_CS3n PIN_CFG(0, ALT_A) + +#define GPIO1_GPIO PIN_CFG(1, GPIO) +#define GPIO1_SM_A3 PIN_CFG(1, ALT_A) + +#define GPIO2_GPIO PIN_CFG(2, GPIO) +#define GPIO2_SM_A4 PIN_CFG(2, ALT_A) +#define GPIO2_SM_AVD PIN_CFG(2, ALT_B) + +#define GPIO3_GPIO PIN_CFG(3, GPIO) +#define GPIO3_I2C1_SCL PIN_CFG(3, ALT_A) + +#define GPIO4_GPIO PIN_CFG(4, GPIO) +#define GPIO4_I2C1_SDA PIN_CFG(4, ALT_A) + +#define GPIO5_GPIO PIN_CFG(5, GPIO) +#define GPIO5_MC0_DAT0 PIN_CFG(5, ALT_A) +#define GPIO5_SM_ADQ8 PIN_CFG(5, ALT_B) + +#define GPIO6_GPIO PIN_CFG(6, GPIO) +#define GPIO6_MC0_DAT1 PIN_CFG(6, ALT_A) +#define GPIO6_SM_ADQ0 PIN_CFG(6, ALT_B) + +#define GPIO7_GPIO PIN_CFG(7, GPIO) +#define GPIO7_MC0_DAT2 PIN_CFG(7, ALT_A) +#define GPIO7_SM_ADQ9 PIN_CFG(7, ALT_B) + +#define GPIO8_GPIO PIN_CFG(8, GPIO) +#define GPIO8_MC0_DAT3 PIN_CFG(8, ALT_A) +#define GPIO8_SM_ADQ1 PIN_CFG(8, ALT_B) + +#define GPIO9_GPIO PIN_CFG(9, GPIO) +#define GPIO9_MC0_DAT4 PIN_CFG(9, ALT_A) +#define GPIO9_SM_ADQ10 PIN_CFG(9, ALT_B) + +#define GPIO10_GPIO PIN_CFG(10, GPIO) +#define GPIO10_MC0_DAT5 PIN_CFG(10, ALT_A) +#define GPIO10_SM_ADQ2 PIN_CFG(10, ALT_B) + +#define GPIO11_GPIO PIN_CFG(11, GPIO) +#define GPIO11_MC0_DAT6 PIN_CFG(11, ALT_A) +#define GPIO11_SM_ADQ11 PIN_CFG(11, ALT_B) + +#define GPIO12_GPIO PIN_CFG(12, GPIO) +#define GPIO12_MC0_DAT7 PIN_CFG(12, ALT_A) +#define GPIO12_SM_ADQ3 PIN_CFG(12, ALT_B) + +#define GPIO13_GPIO PIN_CFG(13, GPIO) +#define GPIO13_MC0_CMD PIN_CFG(13, ALT_A) +#define GPIO13_SM_BUSY0n PIN_CFG(13, ALT_B) +#define GPIO13_SM_WAIT0n PIN_CFG(13, ALT_C) + +#define GPIO14_GPIO PIN_CFG(14, GPIO) +#define GPIO14_MC0_CLK PIN_CFG(14, ALT_A) +#define GPIO14_SM_CS1n PIN_CFG(14, ALT_B) +#define GPIO14_SM_CKO PIN_CFG(14, ALT_C) + +#define GPIO15_GPIO PIN_CFG(15, GPIO) +#define GPIO15_SM_A5 PIN_CFG(15, ALT_A) +#define GPIO15_SM_CLE PIN_CFG(15, ALT_B) + +#define GPIO16_GPIO PIN_CFG(16, GPIO) +#define GPIO16_MC2_CMD PIN_CFG(16, ALT_A) +#define GPIO16_SM_OEn PIN_CFG(16, ALT_B) + +#define GPIO17_GPIO PIN_CFG(17, GPIO) +#define GPIO17_MC2_CLK PIN_CFG(17, ALT_A) +#define GPIO17_SM_WEn PIN_CFG(17, ALT_B) + +#define GPIO18_GPIO PIN_CFG(18, GPIO) +#define GPIO18_SM_A6 PIN_CFG(18, ALT_A) +#define GPIO18_SM_ALE PIN_CFG(18, ALT_B) +#define GPIO18_SM_AVDn PIN_CFG(18, ALT_C) + +#define GPIO19_GPIO PIN_CFG(19, GPIO) +#define GPIO19_MC2_DAT1 PIN_CFG(19, ALT_A) +#define GPIO19_SM_ADQ4 PIN_CFG(19, ALT_B) + +#define GPIO20_GPIO PIN_CFG(20, GPIO) +#define GPIO20_MC2_DAT3 PIN_CFG(20, ALT_A) +#define GPIO20_SM_ADQ5 PIN_CFG(20, ALT_B) + +#define GPIO21_GPIO PIN_CFG(21, GPIO) +#define GPIO21_MC2_DAT5 PIN_CFG(21, ALT_A) +#define GPIO21_SM_ADQ6 PIN_CFG(21, ALT_B) + +#define GPIO22_GPIO PIN_CFG(22, GPIO) +#define GPIO22_MC2_DAT7 PIN_CFG(22, ALT_A) +#define GPIO22_SM_ADQ7 PIN_CFG(22, ALT_B) + +#define GPIO23_GPIO PIN_CFG(23, GPIO) +#define GPIO23_MC2_DAT0 PIN_CFG(23, ALT_A) +#define GPIO23_SM_ADQ12 PIN_CFG(23, ALT_B) +#define GPIO23_MC0_DAT1 PIN_CFG(23, ALT_C) + +#define GPIO24_GPIO PIN_CFG(24, GPIO) +#define GPIO24_MC2_DAT2 PIN_CFG(24, ALT_A) +#define GPIO24_SM_ADQ13 PIN_CFG(24, ALT_B) +#define GPIO24_MC0_DAT3 PIN_CFG(24, ALT_C) + +#define GPIO25_GPIO PIN_CFG(25, GPIO) +#define GPIO25_MC2_DAT4 PIN_CFG(25, ALT_A) +#define GPIO25_SM_ADQ14 PIN_CFG(25, ALT_B) +#define GPIO25_MC0_CMD PIN_CFG(25, ALT_C) + +#define GPIO26_GPIO PIN_CFG(26, GPIO) +#define GPIO26_MC2_DAT6 PIN_CFG(26, ALT_A) +#define GPIO26_SM_ADQ15 PIN_CFG(26, ALT_B) + +#define GPIO27_GPIO PIN_CFG(27, GPIO) +#define GPIO27_SM_CS0n PIN_CFG(27, ALT_A) +#define GPIO27_SM_PS0n PIN_CFG(27, ALT_B) + +#define GPIO28_GPIO PIN_CFG(28, GPIO) +#define GPIO28_U0_TXD PIN_CFG(28, ALT_A) +#define GPIO28_SM_A0 PIN_CFG(28, ALT_B) + +#define GPIO29_GPIO PIN_CFG(29, GPIO) +#define GPIO29_U0_RXD PIN_CFG(29, ALT_A) +#define GPIO29_SM_A1 PIN_CFG(29, ALT_B) +#define GPIO29_PWM_0 PIN_CFG(29, ALT_C) + +#define GPIO30_GPIO PIN_CFG(30, GPIO) +#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) +#define GPIO30_SM_A2 PIN_CFG(30, ALT_B) +#define GPIO30_PWM_1 PIN_CFG(30, ALT_C) + +#define GPIO31_GPIO PIN_CFG(31, GPIO) +#define GPIO31_MC0_DAT7 PIN_CFG(31, ALT_A) +#define GPIO31_SM_CS2n PIN_CFG(31, ALT_B) +#define GPIO31_PWM_2 PIN_CFG(31, ALT_C) + +#define GPIO32_GPIO PIN_CFG(32, GPIO) +#define GPIO32_MSP0_TCK PIN_CFG(32, ALT_A) +#define GPIO32_ACCI2S0_SCK PIN_CFG(32, ALT_B) + +#define GPIO33_GPIO PIN_CFG(33, GPIO) +#define GPIO33_MSP0_TFS PIN_CFG(33, ALT_A) +#define GPIO33_ACCI2S0_WS PIN_CFG(33, ALT_B) + +#define GPIO34_GPIO PIN_CFG(34, GPIO) +#define GPIO34_MSP0_TXD PIN_CFG(34, ALT_A) +#define GPIO34_ACCI2S0_DLD PIN_CFG(34, ALT_B) + +#define GPIO35_GPIO PIN_CFG(35, GPIO) +#define GPIO35_MSP0_RXD PIN_CFG(35, ALT_A) +#define GPIO35_ACCI2S0_ULD PIN_CFG(35, ALT_B) + +#define GPIO64_GPIO PIN_CFG(64, GPIO) +#define GPIO64_USB_DAT0 PIN_CFG(64, ALT_A) +#define GPIO64_U0_TXD PIN_CFG(64, ALT_B) + +#define GPIO65_GPIO PIN_CFG(65, GPIO) +#define GPIO65_USB_DAT1 PIN_CFG(65, ALT_A) +#define GPIO65_U0_RXD PIN_CFG(65, ALT_B) + +#define GPIO66_GPIO PIN_CFG(66, GPIO) +#define GPIO66_USB_DAT2 PIN_CFG(66, ALT_A) + +#define GPIO67_GPIO PIN_CFG(67, GPIO) +#define GPIO67_USB_DAT3 PIN_CFG(67, ALT_A) + +#define GPIO68_GPIO PIN_CFG(68, GPIO) +#define GPIO68_USB_DAT4 PIN_CFG(68, ALT_A) + +#define GPIO69_GPIO PIN_CFG(69, GPIO) +#define GPIO69_USB_DAT5 PIN_CFG(69, ALT_A) + +#define GPIO70_GPIO PIN_CFG(70, GPIO) +#define GPIO70_USB_DAT6 PIN_CFG(70, ALT_A) + +#define GPIO71_GPIO PIN_CFG(71, GPIO) +#define GPIO71_USB_DAT7 PIN_CFG(71, ALT_A) + +#define GPIO72_GPIO PIN_CFG(72, GPIO) +#define GPIO72_USB_STP PIN_CFG(72, ALT_A) + +#define GPIO73_GPIO PIN_CFG(73, GPIO) +#define GPIO73_USB_DIR PIN_CFG(73, ALT_A) + +#define GPIO74_GPIO PIN_CFG(74, GPIO) +#define GPIO74_USB_NXT PIN_CFG(74, ALT_A) + +#define GPIO75_GPIO PIN_CFG(75, GPIO) +#define GPIO75_USB_XCLK PIN_CFG(75, ALT_A) + +#define GPIO76_GPIO PIN_CFG(76, GPIO) + +#define GPIO77_GPIO PIN_CFG(77, GPIO) +#define GPIO77_ACCTX_ON PIN_CFG(77, ALT_A) + +#define GPIO78_GPIO PIN_CFG(78, GPIO) +#define GPIO78_IRQn PIN_CFG(78, ALT_A) + +#define GPIO79_GPIO PIN_CFG(79, GPIO) +#define GPIO79_ACCSIM_Clk PIN_CFG(79, ALT_A) + +#define GPIO80_GPIO PIN_CFG(80, GPIO) +#define GPIO80_ACCSIM_Da PIN_CFG(80, ALT_A) + +#define GPIO81_GPIO PIN_CFG(81, GPIO) +#define GPIO81_ACCSIM_Reset PIN_CFG(81, ALT_A) + +#define GPIO82_GPIO PIN_CFG(82, GPIO) +#define GPIO82_ACCSIM_DDir PIN_CFG(82, ALT_A) + +#define GPIO96_GPIO PIN_CFG(96, GPIO) +#define GPIO96_MSP1_TCK PIN_CFG(96, ALT_A) +#define GPIO96_PRCMU_DEBUG3 PIN_CFG(96, ALT_B) +#define GPIO96_PRCMU_DEBUG7 PIN_CFG(96, ALT_C) + +#define GPIO97_GPIO PIN_CFG(97, GPIO) +#define GPIO97_MSP1_TFS PIN_CFG(97, ALT_A) +#define GPIO97_PRCMU_DEBUG2 PIN_CFG(97, ALT_B) +#define GPIO97_PRCMU_DEBUG6 PIN_CFG(97, ALT_C) + +#define GPIO98_GPIO PIN_CFG(98, GPIO) +#define GPIO98_MSP1_TXD PIN_CFG(98, ALT_A) +#define GPIO98_PRCMU_DEBUG1 PIN_CFG(98, ALT_B) +#define GPIO98_PRCMU_DEBUG5 PIN_CFG(98, ALT_C) + +#define GPIO99_GPIO PIN_CFG(99, GPIO) +#define GPIO99_MSP1_RXD PIN_CFG(99, ALT_A) +#define GPIO99_PRCMU_DEBUG0 PIN_CFG(99, ALT_B) +#define GPIO99_PRCMU_DEBUG4 PIN_CFG(99, ALT_C) + +#define GPIO100_GPIO PIN_CFG(100, GPIO) +#define GPIO100_I2C0_SCL PIN_CFG(100, ALT_A) + +#define GPIO101_GPIO PIN_CFG(101, GPIO) +#define GPIO101_I2C0_SDA PIN_CFG(101, ALT_A) + +#define GPIO128_GPIO PIN_CFG(128, GPIO) +#define GPIO128_KP_I0 PIN_CFG(128, ALT_A) +#define GPIO128_BUSMON_D0 PIN_CFG(128, ALT_B) + +#define GPIO129_GPIO PIN_CFG(129, GPIO) +#define GPIO129_KP_O0 PIN_CFG(129, ALT_A) +#define GPIO129_BUSMON_D1 PIN_CFG(129, ALT_B) + +#define GPIO130_GPIO PIN_CFG(130, GPIO) +#define GPIO130_KP_I1 PIN_CFG(130, ALT_A) +#define GPIO130_BUSMON_D2 PIN_CFG(130, ALT_B) + +#define GPIO131_GPIO PIN_CFG(131, GPIO) +#define GPIO131_KP_O1 PIN_CFG(131, ALT_A) +#define GPIO131_BUSMON_D3 PIN_CFG(131, ALT_B) + +#define GPIO132_GPIO PIN_CFG(132, GPIO) +#define GPIO132_KP_I2 PIN_CFG(132, ALT_A) +#define GPIO132_ETM_D15 PIN_CFG(132, ALT_B) +#define GPIO132_STMAPE_CLK PIN_CFG(132, ALT_C) + +#define GPIO133_GPIO PIN_CFG(133, GPIO) +#define GPIO133_KP_O2 PIN_CFG(133, ALT_A) +#define GPIO133_ETM_D14 PIN_CFG(133, ALT_B) +#define GPIO133_U0_RXD PIN_CFG(133, ALT_C) + +#define GPIO134_GPIO PIN_CFG(134, GPIO) +#define GPIO134_KP_I3 PIN_CFG(134, ALT_A) +#define GPIO134_ETM_D13 PIN_CFG(134, ALT_B) +#define GPIO134_STMAPE_DAT0 PIN_CFG(134, ALT_C) + +#define GPIO135_GPIO PIN_CFG(135, GPIO) +#define GPIO135_KP_O3 PIN_CFG(135, ALT_A) +#define GPIO135_ETM_D12 PIN_CFG(135, ALT_B) +#define GPIO135_STMAPE_DAT1 PIN_CFG(135, ALT_C) + +#define GPIO136_GPIO PIN_CFG(136, GPIO) +#define GPIO136_KP_I4 PIN_CFG(136, ALT_A) +#define GPIO136_ETM_D11 PIN_CFG(136, ALT_B) +#define GPIO136_STMAPE_DAT2 PIN_CFG(136, ALT_C) + +#define GPIO137_GPIO PIN_CFG(137, GPIO) +#define GPIO137_KP_O4 PIN_CFG(137, ALT_A) +#define GPIO137_ETM_D10 PIN_CFG(137, ALT_B) +#define GPIO137_STMAPE_DAT3 PIN_CFG(137, ALT_C) + +#define GPIO138_GPIO PIN_CFG(138, GPIO) +#define GPIO138_KP_I5 PIN_CFG(138, ALT_A) +#define GPIO138_ETM_D9 PIN_CFG(138, ALT_B) +#define GPIO138_U0_TXD PIN_CFG(138, ALT_C) + +#define GPIO139_GPIO PIN_CFG(139, GPIO) +#define GPIO139_KP_O5 PIN_CFG(139, ALT_A) +#define GPIO139_ETM_D8 PIN_CFG(139, ALT_B) +#define GPIO139_BUSMON_D11 PIN_CFG(139, ALT_C) + +#define GPIO140_GPIO PIN_CFG(140, GPIO) +#define GPIO140_KP_I6 PIN_CFG(140, ALT_A) +#define GPIO140_ETM_D7 PIN_CFG(140, ALT_B) +#define GPIO140_STMAPE_CLK PIN_CFG(140, ALT_C) + +#define GPIO141_GPIO PIN_CFG(141, GPIO) +#define GPIO141_KP_O6 PIN_CFG(141, ALT_A) +#define GPIO141_ETM_D6 PIN_CFG(141, ALT_B) +#define GPIO141_U0_RXD PIN_CFG(141, ALT_C) + +#define GPIO142_GPIO PIN_CFG(142, GPIO) +#define GPIO142_KP_I7 PIN_CFG(142, ALT_A) +#define GPIO142_ETM_D5 PIN_CFG(142, ALT_B) +#define GPIO142_STMAPE_DAT0 PIN_CFG(142, ALT_C) + +#define GPIO143_GPIO PIN_CFG(143, GPIO) +#define GPIO143_KP_O7 PIN_CFG(143, ALT_A) +#define GPIO143_ETM_D4 PIN_CFG(143, ALT_B) +#define GPIO143_STMAPE_DAT1 PIN_CFG(143, ALT_C) + +#define GPIO144_GPIO PIN_CFG(144, GPIO) +#define GPIO144_I2C3_SCL PIN_CFG(144, ALT_A) +#define GPIO144_ETM_D3 PIN_CFG(144, ALT_B) +#define GPIO144_STMAPE_DAT2 PIN_CFG(144, ALT_C) + +#define GPIO145_GPIO PIN_CFG(145, GPIO) +#define GPIO145_I2C3_SDA PIN_CFG(145, ALT_A) +#define GPIO145_ETM_D2 PIN_CFG(145, ALT_B) +#define GPIO145_STMAPE_DAT3 PIN_CFG(145, ALT_C) + +#define GPIO146_GPIO PIN_CFG(146, GPIO) +#define GPIO146_PWM_0 PIN_CFG(146, ALT_A) +#define GPIO146_ETM_D1 PIN_CFG(146, ALT_B) + +#define GPIO147_GPIO PIN_CFG(147, GPIO) +#define GPIO147_PWM_1 PIN_CFG(147, ALT_A) +#define GPIO147_ETM_D0 PIN_CFG(147, ALT_B) + +#define GPIO148_GPIO PIN_CFG(148, GPIO) +#define GPIO148_PWM_2 PIN_CFG(148, ALT_A) +#define GPIO148_ETM_CLK PIN_CFG(148, ALT_B) + +#define GPIO160_GPIO PIN_CFG(160, GPIO) +#define GPIO160_CLKOUT_REQn PIN_CFG(160, ALT_A) + +#define GPIO161_GPIO PIN_CFG(161, GPIO) +#define GPIO161_CLKOUT_0 PIN_CFG(161, ALT_A) + +#define GPIO162_GPIO PIN_CFG(162, GPIO) +#define GPIO162_CLKOUT_1 PIN_CFG(162, ALT_A) + +#define GPIO163_GPIO PIN_CFG(163, GPIO) + +#define GPIO164_GPIO PIN_CFG(164, GPIO) +#define GPIO164_GPS_START PIN_CFG(164, ALT_A) + +#define GPIO165_GPIO PIN_CFG(165, GPIO) +#define GPIO165_SPI1_CS2n PIN_CFG(165, ALT_A) +#define GPIO165_U3_RXD PIN_CFG(165, ALT_B) +#define GPIO165_BUSMON_D20 PIN_CFG(165, ALT_C) + +#define GPIO166_GPIO PIN_CFG(166, GPIO) +#define GPIO166_SPI1_CS1n PIN_CFG(166, ALT_A) +#define GPIO166_U3_TXD PIN_CFG(166, ALT_B) +#define GPIO166_BUSMON_D21 PIN_CFG(166, ALT_C) + +#define GPIO167_GPIO PIN_CFG(167, GPIO) +#define GPIO167_SPI1_CS0n PIN_CFG(167, ALT_A) +#define GPIO167_U3_RTSn PIN_CFG(167, ALT_B) +#define GPIO167_BUSMON_D22 PIN_CFG(167, ALT_C) + +#define GPIO168_GPIO PIN_CFG(168, GPIO) +#define GPIO168_SPI1_RXD PIN_CFG(168, ALT_A) +#define GPIO168_U3_CTSn PIN_CFG(168, ALT_B) +#define GPIO168_BUSMON_D23 PIN_CFG(168, ALT_C) + +#define GPIO169_GPIO PIN_CFG(169, GPIO) +#define GPIO169_SPI1_TXD PIN_CFG(169, ALT_A) +#define GPIO169_DDR_RC PIN_CFG(169, ALT_B) +#define GPIO169_BUSMON_D24 PIN_CFG(169, ALT_C) + +#define GPIO170_GPIO PIN_CFG(170, GPIO) +#define GPIO170_SPI1_CLK PIN_CFG(170, ALT_A) + +#define GPIO171_GPIO PIN_CFG(171, GPIO) +#define GPIO171_MC3_DAT0 PIN_CFG(171, ALT_A) +#define GPIO171_SPI3_RXD PIN_CFG(171, ALT_B) +#define GPIO171_BUSMON_D25 PIN_CFG(171, ALT_C) + +#define GPIO172_GPIO PIN_CFG(172, GPIO) +#define GPIO172_MC3_DAT1 PIN_CFG(172, ALT_A) +#define GPIO172_SPI3_CS1n PIN_CFG(172, ALT_B) +#define GPIO172_BUSMON_D26 PIN_CFG(172, ALT_C) + +#define GPIO173_GPIO PIN_CFG(173, GPIO) +#define GPIO173_MC3_DAT2 PIN_CFG(173, ALT_A) +#define GPIO173_SPI3_CS2n PIN_CFG(173, ALT_B) +#define GPIO173_BUSMON_D27 PIN_CFG(173, ALT_C) + +#define GPIO174_GPIO PIN_CFG(174, GPIO) +#define GPIO174_MC3_DAT3 PIN_CFG(174, ALT_A) +#define GPIO174_SPI3_CS0n PIN_CFG(174, ALT_B) +#define GPIO174_BUSMON_D28 PIN_CFG(174, ALT_C) + +#define GPIO175_GPIO PIN_CFG(175, GPIO) +#define GPIO175_MC3_CMD PIN_CFG(175, ALT_A) +#define GPIO175_SPI3_TXD PIN_CFG(175, ALT_B) +#define GPIO175_BUSMON_D29 PIN_CFG(175, ALT_C) + +#define GPIO176_GPIO PIN_CFG(176, GPIO) +#define GPIO176_MC3_CLK PIN_CFG(176, ALT_A) +#define GPIO176_SPI3_CLK PIN_CFG(176, ALT_B) + +#define GPIO177_GPIO PIN_CFG(177, GPIO) +#define GPIO177_U2_RXD PIN_CFG(177, ALT_A) +#define GPIO177_I2C3_SCL PIN_CFG(177, ALT_B) +#define GPIO177_BUSMON_D30 PIN_CFG(177, ALT_C) + +#define GPIO178_GPIO PIN_CFG(178, GPIO) +#define GPIO178_U2_TXD PIN_CFG(178, ALT_A) +#define GPIO178_I2C3_SDA PIN_CFG(178, ALT_B) +#define GPIO178_BUSMON_D31 PIN_CFG(178, ALT_C) + +#define GPIO179_GPIO PIN_CFG(179, GPIO) +#define GPIO179_U2_CTSn PIN_CFG(179, ALT_A) +#define GPIO179_U3_RXD PIN_CFG(179, ALT_B) +#define GPIO179_BUSMON_D32 PIN_CFG(179, ALT_C) + +#define GPIO180_GPIO PIN_CFG(180, GPIO) +#define GPIO180_U2_RTSn PIN_CFG(180, ALT_A) +#define GPIO180_U3_TXD PIN_CFG(180, ALT_B) +#define GPIO180_BUSMON_D33 PIN_CFG(180, ALT_C) + +#define GPIO185_GPIO PIN_CFG(185, GPIO) +#define GPIO185_SPI3_CS2n PIN_CFG(185, ALT_A) +#define GPIO185_MC4_DAT0 PIN_CFG(185, ALT_B) + +#define GPIO186_GPIO PIN_CFG(186, GPIO) +#define GPIO186_SPI3_CS1n PIN_CFG(186, ALT_A) +#define GPIO186_MC4_DAT1 PIN_CFG(186, ALT_B) + +#define GPIO187_GPIO PIN_CFG(187, GPIO) +#define GPIO187_SPI3_CS0n PIN_CFG(187, ALT_A) +#define GPIO187_MC4_DAT2 PIN_CFG(187, ALT_B) + +#define GPIO188_GPIO PIN_CFG(188, GPIO) +#define GPIO188_SPI3_RXD PIN_CFG(188, ALT_A) +#define GPIO188_MC4_DAT3 PIN_CFG(188, ALT_B) + +#define GPIO189_GPIO PIN_CFG(189, GPIO) +#define GPIO189_SPI3_TXD PIN_CFG(189, ALT_A) +#define GPIO189_MC4_CMD PIN_CFG(189, ALT_B) + +#define GPIO190_GPIO PIN_CFG(190, GPIO) +#define GPIO190_SPI3_CLK PIN_CFG(190, ALT_A) +#define GPIO190_MC4_CLK PIN_CFG(190, ALT_B) + +#define GPIO191_GPIO PIN_CFG(191, GPIO) +#define GPIO191_MC1_DAT0 PIN_CFG(191, ALT_A) +#define GPIO191_MC4_DAT4 PIN_CFG(191, ALT_B) +#define GPIO191_STMAPE_DAT0 PIN_CFG(191, ALT_C) + +#define GPIO192_GPIO PIN_CFG(192, GPIO) +#define GPIO192_MC1_DAT1 PIN_CFG(192, ALT_A) +#define GPIO192_MC4_DAT5 PIN_CFG(192, ALT_B) +#define GPIO192_STMAPE_DAT1 PIN_CFG(192, ALT_C) + +#define GPIO193_GPIO PIN_CFG(193, GPIO) +#define GPIO193_MC1_DAT2 PIN_CFG(193, ALT_A) +#define GPIO193_MC4_DAT6 PIN_CFG(193, ALT_B) +#define GPIO193_STMAPE_DAT2 PIN_CFG(193, ALT_C) + +#define GPIO194_GPIO PIN_CFG(194, GPIO) +#define GPIO194_MC1_DAT3 PIN_CFG(194, ALT_A) +#define GPIO194_MC4_DAT7 PIN_CFG(194, ALT_B) +#define GPIO194_STMAPE_DAT3 PIN_CFG(194, ALT_C) + +#define GPIO195_GPIO PIN_CFG(195, GPIO) +#define GPIO195_MC1_CLK PIN_CFG(195, ALT_A) +#define GPIO195_STMAPE_CLK PIN_CFG(195, ALT_B) +#define GPIO195_BUSMON_CLK PIN_CFG(195, ALT_C) + +#define GPIO196_GPIO PIN_CFG(196, GPIO) +#define GPIO196_MC1_CMD PIN_CFG(196, ALT_A) +#define GPIO196_U0_RXD PIN_CFG(196, ALT_B) +#define GPIO196_BUSMON_D38 PIN_CFG(196, ALT_C) + +#define GPIO197_GPIO PIN_CFG(197, GPIO) +#define GPIO197_MC1_CMDDIR PIN_CFG(197, ALT_A) +#define GPIO197_BUSMON_D39 PIN_CFG(197, ALT_B) + +#define GPIO198_GPIO PIN_CFG(198, GPIO) +#define GPIO198_MC1_FBCLK PIN_CFG(198, ALT_A) + +#define GPIO199_GPIO PIN_CFG(199, GPIO) +#define GPIO199_MC1_DAT0DIR PIN_CFG(199, ALT_A) +#define GPIO199_BUSMON_D40 PIN_CFG(199, ALT_B) + +#define GPIO200_GPIO PIN_CFG(200, GPIO) +#define GPIO200_U1_TXD PIN_CFG(200, ALT_A) +#define GPIO200_ACCU0_RTSn PIN_CFG(200, ALT_B) + +#define GPIO201_GPIO PIN_CFG(201, GPIO) +#define GPIO201_U1_RXD PIN_CFG(201, ALT_A) +#define GPIO201_ACCU0_CTSn PIN_CFG(201, ALT_B) + +#define GPIO202_GPIO PIN_CFG(202, GPIO) +#define GPIO202_U1_CTSn PIN_CFG(202, ALT_A) +#define GPIO202_ACCU0_RXD PIN_CFG(202, ALT_B) + +#define GPIO203_GPIO PIN_CFG(203, GPIO) +#define GPIO203_U1_RTSn PIN_CFG(203, ALT_A) +#define GPIO203_ACCU0_TXD PIN_CFG(203, ALT_B) + +#define GPIO204_GPIO PIN_CFG(204, GPIO) +#define GPIO204_SPI0_CS2n PIN_CFG(204, ALT_A) +#define GPIO204_ACCGPIO_000 PIN_CFG(204, ALT_B) +#define GPIO204_LCD_VSI1 PIN_CFG(204, ALT_C) + +#define GPIO205_GPIO PIN_CFG(205, GPIO) +#define GPIO205_SPI0_CS1n PIN_CFG(205, ALT_A) +#define GPIO205_ACCGPIO_001 PIN_CFG(205, ALT_B) +#define GPIO205_LCD_D3 PIN_CFG(205, ALT_C) + +#define GPIO206_GPIO PIN_CFG(206, GPIO) +#define GPIO206_SPI0_CS0n PIN_CFG(206, ALT_A) +#define GPIO206_ACCGPIO_002 PIN_CFG(206, ALT_B) +#define GPIO206_LCD_D2 PIN_CFG(206, ALT_C) + +#define GPIO207_GPIO PIN_CFG(207, GPIO) +#define GPIO207_SPI0_RXD PIN_CFG(207, ALT_A) +#define GPIO207_ACCGPIO_003 PIN_CFG(207, ALT_B) +#define GPIO207_LCD_D1 PIN_CFG(207, ALT_C) + +#define GPIO208_GPIO PIN_CFG(208, GPIO) +#define GPIO208_SPI0_TXD PIN_CFG(208, ALT_A) +#define GPIO208_ACCGPIO_004 PIN_CFG(208, ALT_B) +#define GPIO208_LCD_D0 PIN_CFG(208, ALT_C) + +#define GPIO209_GPIO PIN_CFG(209, GPIO) +#define GPIO209_SPI0_CLK PIN_CFG(209, ALT_A) +#define GPIO209_ACCGPIO_005 PIN_CFG(209, ALT_B) +#define GPIO209_LCD_CLK PIN_CFG(209, ALT_C) + +#define GPIO210_GPIO PIN_CFG(210, GPIO) +#define GPIO210_LCD_VSO PIN_CFG(210, ALT_A) +#define GPIO210_PRCMU_PWRCTRL1 PIN_CFG(210, ALT_B) + +#define GPIO211_GPIO PIN_CFG(211, GPIO) +#define GPIO211_LCD_VSI0 PIN_CFG(211, ALT_A) +#define GPIO211_PRCMU_PWRCTRL2 PIN_CFG(211, ALT_B) + +#define GPIO212_GPIO PIN_CFG(212, GPIO) +#define GPIO212_SPI2_CS2n PIN_CFG(212, ALT_A) +#define GPIO212_LCD_HSO PIN_CFG(212, ALT_B) + +#define GPIO213_GPIO PIN_CFG(213, GPIO) +#define GPIO213_SPI2_CS1n PIN_CFG(213, ALT_A) +#define GPIO213_LCD_DE PIN_CFG(213, ALT_B) +#define GPIO213_BUSMON_D16 PIN_CFG(213, ALT_C) + +#define GPIO214_GPIO PIN_CFG(214, GPIO) +#define GPIO214_SPI2_CS0n PIN_CFG(214, ALT_A) +#define GPIO214_LCD_D7 PIN_CFG(214, ALT_B) +#define GPIO214_BUSMON_D17 PIN_CFG(214, ALT_C) + +#define GPIO215_GPIO PIN_CFG(215, GPIO) +#define GPIO215_SPI2_RXD PIN_CFG(215, ALT_A) +#define GPIO215_LCD_D6 PIN_CFG(215, ALT_B) +#define GPIO215_BUSMON_D18 PIN_CFG(215, ALT_C) + +#define GPIO216_GPIO PIN_CFG(216, GPIO) +#define GPIO216_SPI2_CLK PIN_CFG(216, ALT_A) +#define GPIO216_LCD_D5 PIN_CFG(216, ALT_B) + +#define GPIO217_GPIO PIN_CFG(217, GPIO) +#define GPIO217_SPI2_TXD PIN_CFG(217, ALT_A) +#define GPIO217_LCD_D4 PIN_CFG(217, ALT_B) +#define GPIO217_BUSMON_D19 PIN_CFG(217, ALT_C) + +#define GPIO218_GPIO PIN_CFG(218, GPIO) +#define GPIO218_I2C2_SCL PIN_CFG(218, ALT_A) +#define GPIO218_LCD_VSO PIN_CFG(218, ALT_B) + +#define GPIO219_GPIO PIN_CFG(219, GPIO) +#define GPIO219_I2C2_SDA PIN_CFG(219, ALT_A) +#define GPIO219_LCD_D3 PIN_CFG(219, ALT_B) + +#define GPIO220_GPIO PIN_CFG(220, GPIO) +#define GPIO220_MSP2_TCK PIN_CFG(220, ALT_A) +#define GPIO220_LCD_D2 PIN_CFG(220, ALT_B) + +#define GPIO221_GPIO PIN_CFG(221, GPIO) +#define GPIO221_MSP2_TFS PIN_CFG(221, ALT_A) +#define GPIO221_LCD_D1 PIN_CFG(221, ALT_B) + +#define GPIO222_GPIO PIN_CFG(222, GPIO) +#define GPIO222_MSP2_TXD PIN_CFG(222, ALT_A) +#define GPIO222_LCD_D0 PIN_CFG(222, ALT_B) + +#define GPIO223_GPIO PIN_CFG(223, GPIO) +#define GPIO223_MSP2_RXD PIN_CFG(223, ALT_A) +#define GPIO223_LCD_CLK PIN_CFG(223, ALT_B) + +#define GPIO224_GPIO PIN_CFG(224, GPIO) +#define GPIO224_PRCMU_PWRCTRL0 PIN_CFG(224, ALT_A) +#define GPIO224_LCD_VSI1 PIN_CFG(224, ALT_B) + +#define GPIO225_GPIO PIN_CFG(225, GPIO) +#define GPIO225_PRCMU_PWRCTRL1 PIN_CFG(225, ALT_A) +#define GPIO225_IRDA_RXD PIN_CFG(225, ALT_B) + +#define GPIO226_GPIO PIN_CFG(226, GPIO) +#define GPIO226_PRCMU_PWRCTRL2 PIN_CFG(226, ALT_A) +#define GPIO226_IRRC_DAT PIN_CFG(226, ALT_B) + +#define GPIO227_GPIO PIN_CFG(227, GPIO) +#define GPIO227_IRRC_DAT PIN_CFG(227, ALT_A) +#define GPIO227_IRDA_TXD PIN_CFG(227, ALT_B) + +#endif diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h index 9055d5d3233c..66f8761cc823 100644 --- a/arch/arm/mach-ux500/pins-db8500.h +++ b/arch/arm/mach-ux500/pins-db8500.h @@ -96,57 +96,57 @@ #define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) #define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A) +#define GPIO18_MC0_CMDDIR PIN_CFG_PULL(18, ALT_A, UP) #define GPIO18_U2_RXD PIN_CFG(18, ALT_B) #define GPIO18_MS_IEP PIN_CFG(18, ALT_C) #define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A) +#define GPIO19_MC0_DAT0DIR PIN_CFG_PULL(19, ALT_A, UP) #define GPIO19_U2_TXD PIN_CFG(19, ALT_B) #define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) #define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A) +#define GPIO20_MC0_DAT2DIR PIN_CFG_PULL(20, ALT_A, UP) #define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) #define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) #define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A) +#define GPIO21_MC0_DAT31DIR PIN_CFG_PULL(21, ALT_A, UP) #define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) #define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) #define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A) +#define GPIO22_MC0_FBCLK PIN_CFG_PULL(22, ALT_A, UP) #define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) #define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) #define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A) +#define GPIO23_MC0_CLK PIN_CFG_PULL(23, ALT_A, UP) #define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) #define GPIO23_MS_CLK PIN_CFG(23, ALT_C) #define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A) +#define GPIO24_MC0_CMD PIN_CFG_PULL(24, ALT_A, UP) #define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) #define GPIO24_MS_BS PIN_CFG(24, ALT_C) #define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A) +#define GPIO25_MC0_DAT0 PIN_CFG_PULL(25, ALT_A, UP) #define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) #define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) #define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A) +#define GPIO26_MC0_DAT1 PIN_CFG_PULL(26, ALT_A, UP) #define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) #define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) #define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A) +#define GPIO27_MC0_DAT2 PIN_CFG_PULL(27, ALT_A, UP) #define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) #define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) #define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A) +#define GPIO28_MC0_DAT3 PIN_CFG_PULL(28, ALT_A, UP) #define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) #define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) @@ -357,48 +357,48 @@ #define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) #define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A) +#define GPIO128_MC2_CLK PIN_CFG_PULL(128, ALT_A, UP) #define GPIO128_SM_CKO PIN_CFG(128, ALT_B) #define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A) +#define GPIO129_MC2_CMD PIN_CFG_PULL(129, ALT_A, UP) #define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) #define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A) +#define GPIO130_MC2_FBCLK PIN_CFG_PULL(130, ALT_A, UP) #define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) #define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) #define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A) +#define GPIO131_MC2_DAT0 PIN_CFG_PULL(131, ALT_A, UP) #define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) #define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A) +#define GPIO132_MC2_DAT1 PIN_CFG_PULL(132, ALT_A, UP) #define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) #define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A) +#define GPIO133_MC2_DAT2 PIN_CFG_PULL(133, ALT_A, UP) #define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) #define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A) +#define GPIO134_MC2_DAT3 PIN_CFG_PULL(134, ALT_A, UP) #define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) #define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A) +#define GPIO135_MC2_DAT4 PIN_CFG_PULL(135, ALT_A, UP) #define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) #define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A) +#define GPIO136_MC2_DAT5 PIN_CFG_PULL(136, ALT_A, UP) #define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) #define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A) +#define GPIO137_MC2_DAT6 PIN_CFG_PULL(137, ALT_A, UP) #define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) #define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A) +#define GPIO138_MC2_DAT7 PIN_CFG_PULL(138, ALT_A, UP) #define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) #define GPIO139_GPIO PIN_CFG(139, GPIO) @@ -569,39 +569,39 @@ #define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) #define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A) +#define GPIO197_MC4_DAT3 PIN_CFG_PULL(197, ALT_A, UP) #define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A) +#define GPIO198_MC4_DAT2 PIN_CFG_PULL(198, ALT_A, UP) #define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A) +#define GPIO199_MC4_DAT1 PIN_CFG_PULL(199, ALT_A, UP) #define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A) +#define GPIO200_MC4_DAT0 PIN_CFG_PULL(200, ALT_A, UP) #define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A) +#define GPIO201_MC4_CMD PIN_CFG_PULL(201, ALT_A, UP) #define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A) +#define GPIO202_MC4_FBCLK PIN_CFG_PULL(202, ALT_A, UP) #define GPIO202_PWL PIN_CFG(202, ALT_B) #define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) #define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A) +#define GPIO203_MC4_CLK PIN_CFG_PULL(203, ALT_A, UP) #define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A) +#define GPIO204_MC4_DAT7 PIN_CFG_PULL(204, ALT_A, UP) #define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A) +#define GPIO205_MC4_DAT6 PIN_CFG_PULL(205, ALT_A, UP) #define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A) +#define GPIO206_MC4_DAT5 PIN_CFG_PULL(206, ALT_A, UP) #define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A) +#define GPIO207_MC4_DAT4 PIN_CFG_PULL(207, ALT_A, UP) #define GPIO208_GPIO PIN_CFG(208, GPIO) #define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 438ef16aec90..9e4c678de785 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -78,6 +78,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1); + smp_cross_call(cpumask_of(cpu)); + timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { if (pen_release == -1) diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c new file mode 100644 index 000000000000..293274d1342a --- /dev/null +++ b/arch/arm/mach-ux500/prcmu.c @@ -0,0 +1,231 @@ +/* + * Copyright (C) ST Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> + * + * U8500 PRCMU driver. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/mutex.h> +#include <linux/completion.h> +#include <linux/jiffies.h> +#include <linux/bitops.h> +#include <linux/interrupt.h> + +#include <mach/hardware.h> +#include <mach/prcmu-regs.h> + +#define PRCMU_TCDM_BASE __io_address(U8500_PRCMU_TCDM_BASE) + +#define REQ_MB5 (PRCMU_TCDM_BASE + 0xE44) +#define ACK_MB5 (PRCMU_TCDM_BASE + 0xDF4) + +#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) +#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) +#define REQ_MB5_I2C_REG (REQ_MB5 + 2) +#define REQ_MB5_I2C_VAL (REQ_MB5 + 3) + +#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) +#define ACK_MB5_I2C_VAL (ACK_MB5 + 3) + +#define I2C_WRITE(slave) ((slave) << 1) +#define I2C_READ(slave) (((slave) << 1) | BIT(0)) +#define I2C_STOP_EN BIT(3) + +enum ack_mb5_status { + I2C_WR_OK = 0x01, + I2C_RD_OK = 0x02, +}; + +#define MBOX_BIT BIT +#define NUM_MBOX 8 + +static struct { + struct mutex lock; + struct completion work; + bool failed; + struct { + u8 status; + u8 value; + } ack; +} mb5_transfer; + +/** + * prcmu_abb_read() - Read register value(s) from the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The read out value(s). + * @size: The number of registers to read. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + r = mutex_lock_interruptible(&mb5_transfer.lock); + if (r) + return r; + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP); + writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); + writeb(reg, REQ_MB5_I2C_REG); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(500))) { + pr_err("prcmu: prcmu_abb_read timed out.\n"); + r = -EIO; + goto unlock_and_return; + } + r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); + if (!r) + *value = mb5_transfer.ack.value; + +unlock_and_return: + mutex_unlock(&mb5_transfer.lock); + return r; +} +EXPORT_SYMBOL(prcmu_abb_read); + +/** + * prcmu_abb_write() - Write register value(s) to the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The value(s) to write. + * @size: The number of registers to write. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + r = mutex_lock_interruptible(&mb5_transfer.lock); + if (r) + return r; + + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP); + writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); + writeb(reg, REQ_MB5_I2C_REG); + writeb(*value, REQ_MB5_I2C_VAL); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(500))) { + pr_err("prcmu: prcmu_abb_write timed out.\n"); + r = -EIO; + goto unlock_and_return; + } + r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); + +unlock_and_return: + mutex_unlock(&mb5_transfer.lock); + return r; +} +EXPORT_SYMBOL(prcmu_abb_write); + +static void read_mailbox_0(void) +{ + writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_1(void) +{ + writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_2(void) +{ + writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_3(void) +{ + writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_4(void) +{ + writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_5(void) +{ + mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS); + mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL); + complete(&mb5_transfer.work); + writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_6(void) +{ + writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_7(void) +{ + writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR); +} + +static void (* const read_mailbox[NUM_MBOX])(void) = { + read_mailbox_0, + read_mailbox_1, + read_mailbox_2, + read_mailbox_3, + read_mailbox_4, + read_mailbox_5, + read_mailbox_6, + read_mailbox_7 +}; + +static irqreturn_t prcmu_irq_handler(int irq, void *data) +{ + u32 bits; + u8 n; + + bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1)); + if (unlikely(!bits)) + return IRQ_NONE; + + for (n = 0; bits; n++) { + if (bits & MBOX_BIT(n)) { + bits -= MBOX_BIT(n); + read_mailbox[n](); + } + } + return IRQ_HANDLED; +} + +static int __init prcmu_init(void) +{ + mutex_init(&mb5_transfer.lock); + init_completion(&mb5_transfer.work); + + /* Clean up the mailbox interrupts after pre-kernel code. */ + writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR); + + return request_irq(IRQ_PRCMU, prcmu_irq_handler, 0, "prcmu", NULL); +} + +arch_initcall(prcmu_init); diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h new file mode 100644 index 000000000000..cb2110c32858 --- /dev/null +++ b/arch/arm/mach-ux500/ste-dma40-db5500.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + * + * DB5500-SoC-specific configuration for DMA40 + */ + +#ifndef STE_DMA40_DB5500_H +#define STE_DMA40_DB5500_H + +#define DB5500_DMA_NR_DEV 64 + +enum dma_src_dev_type { + DB5500_DMA_DEV0_SPI0_RX = 0, + DB5500_DMA_DEV1_SPI1_RX = 1, + DB5500_DMA_DEV2_SPI2_RX = 2, + DB5500_DMA_DEV3_SPI3_RX = 3, + DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4, + DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5, + DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6, + DB5500_DMA_DEV7_IRDA_RFS = 7, + DB5500_DMA_DEV8_IRDA_FIFO_RX = 8, + DB5500_DMA_DEV9_MSP0_RX = 9, + DB5500_DMA_DEV10_MSP1_RX = 10, + DB5500_DMA_DEV11_MSP2_RX = 11, + DB5500_DMA_DEV12_UART0_RX = 12, + DB5500_DMA_DEV13_UART1_RX = 13, + DB5500_DMA_DEV14_UART2_RX = 14, + DB5500_DMA_DEV15_UART3_RX = 15, + DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16, + DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17, + DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18, + DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19, + DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20, + DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21, + DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22, + DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23, + DB5500_DMA_DEV24_SDMMC0_RX = 24, + DB5500_DMA_DEV25_SDMMC1_RX = 25, + DB5500_DMA_DEV26_SDMMC2_RX = 26, + DB5500_DMA_DEV27_SDMMC3_RX = 27, + DB5500_DMA_DEV28_SDMMC4_RX = 28, + /* 29 - 32 not used */ + DB5500_DMA_DEV33_SDMMC0_RX = 33, + DB5500_DMA_DEV34_SDMMC1_RX = 34, + DB5500_DMA_DEV35_SDMMC2_RX = 35, + DB5500_DMA_DEV36_SDMMC3_RX = 36, + DB5500_DMA_DEV37_SDMMC4_RX = 37, + DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38, + DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39, + DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40, + DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41, + DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42, + DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43, + DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44, + DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45, + /* 46 not used */ + DB5500_DMA_DEV47_MCDE_RX = 47, + DB5500_DMA_DEV48_CRYPTO1_RX = 48, + /* 49, 50 not used */ + DB5500_DMA_DEV49_I2C1_RX = 51, + DB5500_DMA_DEV50_I2C3_RX = 52, + DB5500_DMA_DEV51_I2C2_RX = 53, + /* 54 - 60 not used */ + DB5500_DMA_DEV61_CRYPTO0_RX = 61, + /* 62, 63 not used */ +}; + +enum dma_dest_dev_type { + DB5500_DMA_DEV0_SPI0_TX = 0, + DB5500_DMA_DEV1_SPI1_TX = 1, + DB5500_DMA_DEV2_SPI2_TX = 2, + DB5500_DMA_DEV3_SPI3_TX = 3, + DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4, + DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5, + DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6, + DB5500_DMA_DEV7_IRRC_TX = 7, + DB5500_DMA_DEV8_IRDA_FIFO_TX = 8, + DB5500_DMA_DEV9_MSP0_TX = 9, + DB5500_DMA_DEV10_MSP1_TX = 10, + DB5500_DMA_DEV11_MSP2_TX = 11, + DB5500_DMA_DEV12_UART0_TX = 12, + DB5500_DMA_DEV13_UART1_TX = 13, + DB5500_DMA_DEV14_UART2_TX = 14, + DB5500_DMA_DEV15_UART3_TX = 15, + DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16, + DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17, + DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18, + DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19, + DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20, + DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21, + DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22, + DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23, + DB5500_DMA_DEV24_SDMMC0_TX = 24, + DB5500_DMA_DEV25_SDMMC1_TX = 25, + DB5500_DMA_DEV26_SDMMC2_TX = 26, + DB5500_DMA_DEV27_SDMMC3_TX = 27, + DB5500_DMA_DEV28_SDMMC4_TX = 28, + /* 29 - 31 not used */ + DB5500_DMA_DEV32_FSMC_TX = 32, + DB5500_DMA_DEV33_SDMMC0_TX = 33, + DB5500_DMA_DEV34_SDMMC1_TX = 34, + DB5500_DMA_DEV35_SDMMC2_TX = 35, + DB5500_DMA_DEV36_SDMMC3_TX = 36, + DB5500_DMA_DEV37_SDMMC4_TX = 37, + DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38, + DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39, + DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40, + DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41, + DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42, + DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43, + DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44, + DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45, + /* 46 not used */ + DB5500_DMA_DEV47_STM_TX = 47, + DB5500_DMA_DEV48_CRYPTO1_TX = 48, + DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49, + DB5500_DMA_DEV50_HASH1_TX = 50, + DB5500_DMA_DEV51_I2C1_TX = 51, + DB5500_DMA_DEV52_I2C3_TX = 52, + DB5500_DMA_DEV53_I2C2_TX = 53, + /* 54, 55 not used */ + DB5500_DMA_MEMCPY_TX_1 = 56, + DB5500_DMA_MEMCPY_TX_2 = 57, + DB5500_DMA_MEMCPY_TX_3 = 58, + DB5500_DMA_MEMCPY_TX_4 = 59, + DB5500_DMA_MEMCPY_TX_5 = 60, + DB5500_DMA_DEV61_CRYPTO0_TX = 61, + DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62, + DB5500_DMA_DEV63_HASH0_TX = 63, +}; + +#endif diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h index 9d9d3797b3b0..a616419bea76 100644 --- a/arch/arm/mach-ux500/ste-dma40-db8500.h +++ b/arch/arm/mach-ux500/ste-dma40-db8500.h @@ -10,145 +10,135 @@ #ifndef STE_DMA40_DB8500_H #define STE_DMA40_DB8500_H -#define STEDMA40_NR_DEV 64 +#define DB8500_DMA_NR_DEV 64 enum dma_src_dev_type { - STEDMA40_DEV_SPI0_RX = 0, - STEDMA40_DEV_SD_MMC0_RX = 1, - STEDMA40_DEV_SD_MMC1_RX = 2, - STEDMA40_DEV_SD_MMC2_RX = 3, - STEDMA40_DEV_I2C1_RX = 4, - STEDMA40_DEV_I2C3_RX = 5, - STEDMA40_DEV_I2C2_RX = 6, - STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */ - STEDMA40_DEV_SSP0_RX = 8, - STEDMA40_DEV_SSP1_RX = 9, - STEDMA40_DEV_MCDE_RX = 10, - STEDMA40_DEV_UART2_RX = 11, - STEDMA40_DEV_UART1_RX = 12, - STEDMA40_DEV_UART0_RX = 13, - STEDMA40_DEV_MSP2_RX = 14, - STEDMA40_DEV_I2C0_RX = 15, - STEDMA40_DEV_USB_OTG_IEP_8 = 16, - STEDMA40_DEV_USB_OTG_IEP_1_9 = 17, - STEDMA40_DEV_USB_OTG_IEP_2_10 = 18, - STEDMA40_DEV_USB_OTG_IEP_3_11 = 19, - STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20, - STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21, - STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22, - STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23, - STEDMA40_DEV_SRC_SXA0_RX_TX = 24, - STEDMA40_DEV_SRC_SXA1_RX_TX = 25, - STEDMA40_DEV_SRC_SXA2_RX_TX = 26, - STEDMA40_DEV_SRC_SXA3_RX_TX = 27, - STEDMA40_DEV_SD_MM2_RX = 28, - STEDMA40_DEV_SD_MM0_RX = 29, - STEDMA40_DEV_MSP1_RX = 30, - /* - * This channel is either SlimBus or MSP, - * never both at the same time. - */ - STEDMA40_SLIM0_CH0_RX = 31, - STEDMA40_DEV_MSP0_RX = 31, - STEDMA40_DEV_SD_MM1_RX = 32, - STEDMA40_DEV_SPI2_RX = 33, - STEDMA40_DEV_I2C3_RX2 = 34, - STEDMA40_DEV_SPI1_RX = 35, - STEDMA40_DEV_USB_OTG_IEP_4_12 = 36, - STEDMA40_DEV_USB_OTG_IEP_5_13 = 37, - STEDMA40_DEV_USB_OTG_IEP_6_14 = 38, - STEDMA40_DEV_USB_OTG_IEP_7_15 = 39, - STEDMA40_DEV_SPI3_RX = 40, - STEDMA40_DEV_SD_MM3_RX = 41, - STEDMA40_DEV_SD_MM4_RX = 42, - STEDMA40_DEV_SD_MM5_RX = 43, - STEDMA40_DEV_SRC_SXA4_RX_TX = 44, - STEDMA40_DEV_SRC_SXA5_RX_TX = 45, - STEDMA40_DEV_SRC_SXA6_RX_TX = 46, - STEDMA40_DEV_SRC_SXA7_RX_TX = 47, - STEDMA40_DEV_CAC1_RX = 48, - /* RX channels 49 and 50 are unused */ - STEDMA40_DEV_MSHC_RX = 51, - STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52, - STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53, - STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54, - STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55, - /* RX channels 56 thru 60 are unused */ - STEDMA40_DEV_CAC0_RX = 61, - /* RX channels 62 and 63 are unused */ + DB8500_DMA_DEV0_SPI0_RX = 0, + DB8500_DMA_DEV1_SD_MMC0_RX = 1, + DB8500_DMA_DEV2_SD_MMC1_RX = 2, + DB8500_DMA_DEV3_SD_MMC2_RX = 3, + DB8500_DMA_DEV4_I2C1_RX = 4, + DB8500_DMA_DEV5_I2C3_RX = 5, + DB8500_DMA_DEV6_I2C2_RX = 6, + DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */ + DB8500_DMA_DEV8_SSP0_RX = 8, + DB8500_DMA_DEV9_SSP1_RX = 9, + DB8500_DMA_DEV10_MCDE_RX = 10, + DB8500_DMA_DEV11_UART2_RX = 11, + DB8500_DMA_DEV12_UART1_RX = 12, + DB8500_DMA_DEV13_UART0_RX = 13, + DB8500_DMA_DEV14_MSP2_RX = 14, + DB8500_DMA_DEV15_I2C0_RX = 15, + DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16, + DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17, + DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18, + DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19, + DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20, + DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21, + DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22, + DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23, + DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24, + DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25, + DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26, + DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27, + DB8500_DMA_DEV28_SD_MM2_RX = 28, + DB8500_DMA_DEV29_SD_MM0_RX = 29, + DB8500_DMA_DEV30_MSP1_RX = 30, + /* On DB8500v2, MSP3 RX replaces MSP1 RX */ + DB8500_DMA_DEV30_MSP3_RX = 30, + DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31, + DB8500_DMA_DEV32_SD_MM1_RX = 32, + DB8500_DMA_DEV33_SPI2_RX = 33, + DB8500_DMA_DEV34_I2C3_RX2 = 34, + DB8500_DMA_DEV35_SPI1_RX = 35, + DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36, + DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37, + DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38, + DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39, + DB8500_DMA_DEV40_SPI3_RX = 40, + DB8500_DMA_DEV41_SD_MM3_RX = 41, + DB8500_DMA_DEV42_SD_MM4_RX = 42, + DB8500_DMA_DEV43_SD_MM5_RX = 43, + DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44, + DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45, + DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46, + DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47, + DB8500_DMA_DEV48_CAC1_RX = 48, + /* 49, 50 and 51 are not used */ + DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52, + DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53, + DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54, + DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55, + /* 56, 57, 58, 59 and 60 are not used */ + DB8500_DMA_DEV61_CAC0_RX = 61, + /* 62 and 63 are not used */ }; enum dma_dest_dev_type { - STEDMA40_DEV_SPI0_TX = 0, - STEDMA40_DEV_SD_MMC0_TX = 1, - STEDMA40_DEV_SD_MMC1_TX = 2, - STEDMA40_DEV_SD_MMC2_TX = 3, - STEDMA40_DEV_I2C1_TX = 4, - STEDMA40_DEV_I2C3_TX = 5, - STEDMA40_DEV_I2C2_TX = 6, - STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */ - STEDMA40_DEV_SSP0_TX = 8, - STEDMA40_DEV_SSP1_TX = 9, - /* TX channel 10 is unused */ - STEDMA40_DEV_UART2_TX = 11, - STEDMA40_DEV_UART1_TX = 12, - STEDMA40_DEV_UART0_TX= 13, - STEDMA40_DEV_MSP2_TX = 14, - STEDMA40_DEV_I2C0_TX = 15, - STEDMA40_DEV_USB_OTG_OEP_8 = 16, - STEDMA40_DEV_USB_OTG_OEP_1_9 = 17, - STEDMA40_DEV_USB_OTG_OEP_2_10= 18, - STEDMA40_DEV_USB_OTG_OEP_3_11 = 19, - STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20, - STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21, - STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22, - STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23, - STEDMA40_DEV_DST_SXA0_RX_TX = 24, - STEDMA40_DEV_DST_SXA1_RX_TX = 25, - STEDMA40_DEV_DST_SXA2_RX_TX = 26, - STEDMA40_DEV_DST_SXA3_RX_TX = 27, - STEDMA40_DEV_SD_MM2_TX = 28, - STEDMA40_DEV_SD_MM0_TX = 29, - STEDMA40_DEV_MSP1_TX = 30, - /* - * This channel is either SlimBus or MSP, - * never both at the same time. - */ - STEDMA40_SLIM0_CH0_TX = 31, - STEDMA40_DEV_MSP0_TX = 31, - STEDMA40_DEV_SD_MM1_TX = 32, - STEDMA40_DEV_SPI2_TX = 33, - /* Secondary I2C3 channel */ - STEDMA40_DEV_I2C3_TX2 = 34, - STEDMA40_DEV_SPI1_TX = 35, - STEDMA40_DEV_USB_OTG_OEP_4_12 = 36, - STEDMA40_DEV_USB_OTG_OEP_5_13 = 37, - STEDMA40_DEV_USB_OTG_OEP_6_14 = 38, - STEDMA40_DEV_USB_OTG_OEP_7_15 = 39, - STEDMA40_DEV_SPI3_TX = 40, - STEDMA40_DEV_SD_MM3_TX = 41, - STEDMA40_DEV_SD_MM4_TX = 42, - STEDMA40_DEV_SD_MM5_TX = 43, - STEDMA40_DEV_DST_SXA4_RX_TX = 44, - STEDMA40_DEV_DST_SXA5_RX_TX = 45, - STEDMA40_DEV_DST_SXA6_RX_TX = 46, - STEDMA40_DEV_DST_SXA7_RX_TX = 47, - STEDMA40_DEV_CAC1_TX = 48, - STEDMA40_DEV_CAC1_TX_HAC1_TX = 49, - STEDMA40_DEV_HAC1_TX = 50, - STEDMA40_MEMCPY_TX_0 = 51, - STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52, - STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53, - STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54, - STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55, - STEDMA40_MEMCPY_TX_1 = 56, - STEDMA40_MEMCPY_TX_2 = 57, - STEDMA40_MEMCPY_TX_3 = 58, - STEDMA40_MEMCPY_TX_4 = 59, - STEDMA40_MEMCPY_TX_5 = 60, - STEDMA40_DEV_CAC0_TX = 61, - STEDMA40_DEV_CAC0_TX_HAC0_TX = 62, - STEDMA40_DEV_HAC0_TX = 63, + DB8500_DMA_DEV0_SPI0_TX = 0, + DB8500_DMA_DEV1_SD_MMC0_TX = 1, + DB8500_DMA_DEV2_SD_MMC1_TX = 2, + DB8500_DMA_DEV3_SD_MMC2_TX = 3, + DB8500_DMA_DEV4_I2C1_TX = 4, + DB8500_DMA_DEV5_I2C3_TX = 5, + DB8500_DMA_DEV6_I2C2_TX = 6, + DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */ + DB8500_DMA_DEV8_SSP0_TX = 8, + DB8500_DMA_DEV9_SSP1_TX = 9, + /* 10 is not used*/ + DB8500_DMA_DEV11_UART2_TX = 11, + DB8500_DMA_DEV12_UART1_TX = 12, + DB8500_DMA_DEV13_UART0_TX = 13, + DB8500_DMA_DEV14_MSP2_TX = 14, + DB8500_DMA_DEV15_I2C0_TX = 15, + DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16, + DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17, + DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18, + DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19, + DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20, + DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21, + DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22, + DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23, + DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24, + DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25, + DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26, + DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27, + DB8500_DMA_DEV28_SD_MM2_TX = 28, + DB8500_DMA_DEV29_SD_MM0_TX = 29, + DB8500_DMA_DEV30_MSP1_TX = 30, + DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31, + DB8500_DMA_DEV32_SD_MM1_TX = 32, + DB8500_DMA_DEV33_SPI2_TX = 33, + DB8500_DMA_DEV34_I2C3_TX2 = 34, + DB8500_DMA_DEV35_SPI1_TX = 35, + DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36, + DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37, + DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38, + DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39, + DB8500_DMA_DEV40_SPI3_TX = 40, + DB8500_DMA_DEV41_SD_MM3_TX = 41, + DB8500_DMA_DEV42_SD_MM4_TX = 42, + DB8500_DMA_DEV43_SD_MM5_TX = 43, + DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44, + DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45, + DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46, + DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47, + DB8500_DMA_DEV48_CAC1_TX = 48, + DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, + DB8500_DMA_DEV50_HAC1_TX = 50, + DB8500_DMA_MEMCPY_TX_0 = 51, + DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52, + DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53, + DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54, + DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55, + DB8500_DMA_MEMCPY_TX_1 = 56, + DB8500_DMA_MEMCPY_TX_2 = 57, + DB8500_DMA_MEMCPY_TX_3 = 58, + DB8500_DMA_MEMCPY_TX_4 = 59, + DB8500_DMA_MEMCPY_TX_5 = 60, + DB8500_DMA_DEV61_CAC0_TX = 61, + DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, + DB8500_DMA_DEV63_HAC0_TX = 63, }; #endif diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S index 6fea7199c626..eb2cf7dc5c44 100644 --- a/arch/arm/mach-versatile/include/mach/debug-macro.S +++ b/arch/arm/mach-versatile/include/mach/debug-macro.S @@ -11,13 +11,11 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf1000000 @ virtual base - orr \rx, \rx, #0x001F0000 - orr \rx, \rx, #0x00001000 + .macro addruart, rp, rv + mov \rp, #0x001F0000 + orr \rp, \rp, #0x00001000 + orr \rv, \rp, #0xf1000000 @ virtual base + orr \rp, \rp, #0x10000000 @ physical base .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h index 427e3612db5d..ebd8a2543d3b 100644 --- a/arch/arm/mach-versatile/include/mach/vmalloc.h +++ b/arch/arm/mach-versatile/include/mach/vmalloc.h @@ -18,4 +18,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) +#define VMALLOC_END 0xd8000000 diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index bb8ec7724f79..aa9730fb13bf 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -35,8 +35,6 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = 0x101f1000, - .io_pg_offst = ((0xf11f1000) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = versatile_map_io, .init_irq = versatile_init_irq, diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 239cd30fc4f5..bf469642a3f8 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -108,8 +108,6 @@ static void __init versatile_pb_init(void) MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = 0x101f1000, - .io_pg_offst = ((0xf11f1000) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = versatile_map_io, .init_irq = versatile_init_irq, diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 71fb17349520..c2e405a9e025 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -245,8 +245,6 @@ static void __init ct_ca9x4_init(void) } MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4") - .phys_io = V2M_UART0 & SECTION_MASK, - .io_pg_offst = (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .map_io = ct_ca9x4_map_io, .init_irq = ct_ca9x4_init_irq, diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S index 5167e2aceeba..050d65e02a42 100644 --- a/arch/arm/mach-vexpress/include/mach/debug-macro.S +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -12,12 +12,10 @@ #define DEBUG_LL_UART_OFFSET 0x00009000 - .macro addruart,rx,tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf8000000 @ virtual base - orr \rx, \rx, #DEBUG_LL_UART_OFFSET + .macro addruart,rp,rv + mov \rp, #DEBUG_LL_UART_OFFSET + orr \rv, \rp, #0xf8000000 @ virtual base + orr \rp, \rp, #0x10000000 @ physical base .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h index 72a9621ed087..5a6da4fd247e 100644 --- a/arch/arm/mach-vexpress/include/mach/smp.h +++ b/arch/arm/mach-vexpress/include/mach/smp.h @@ -2,14 +2,7 @@ #define __MACH_SMP_H #include <asm/hardware/gic.h> - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) +#include <asm/smp_mpidr.h> /* * We use IRQ1 as the IPI diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c index ec05bda946f3..30fccde94fb8 100644 --- a/arch/arm/mach-w90x900/mach-nuc910evb.c +++ b/arch/arm/mach-w90x900/mach-nuc910evb.c @@ -34,8 +34,6 @@ static void __init nuc910evb_init(void) MACHINE_START(W90P910EVB, "W90P910EVB") /* Maintainer: Wan ZongShun */ - .phys_io = W90X900_PA_UART, - .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc, .boot_params = 0, .map_io = nuc910evb_map_io, .init_irq = nuc900_init_irq, diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c index 04d295f89eb0..590c99b96dc1 100644 --- a/arch/arm/mach-w90x900/mach-nuc950evb.c +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c @@ -37,8 +37,6 @@ static void __init nuc950evb_init(void) MACHINE_START(W90P950EVB, "W90P950EVB") /* Maintainer: Wan ZongShun */ - .phys_io = W90X900_PA_UART, - .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc, .boot_params = 0, .map_io = nuc950evb_map_io, .init_irq = nuc900_init_irq, diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c index e3a46f19f2bc..e09c645d61b6 100644 --- a/arch/arm/mach-w90x900/mach-nuc960evb.c +++ b/arch/arm/mach-w90x900/mach-nuc960evb.c @@ -34,8 +34,6 @@ static void __init nuc960evb_init(void) MACHINE_START(W90N960EVB, "W90N960EVB") /* Maintainer: Wan ZongShun */ - .phys_io = W90X900_PA_UART, - .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc, .boot_params = 0, .map_io = nuc960evb_map_io, .init_irq = nuc900_init_irq, diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 86aa689ef1aa..99fa688dfadd 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -21,18 +21,22 @@ #define D_CACHE_LINE_SIZE 32 #define BTB_FLUSH_SIZE 8 -#ifdef CONFIG_ARM_ERRATA_411920 /* - * Invalidate the entire I cache (this code is a workaround for the ARM1136 - * erratum 411920 - Invalidate Instruction Cache operation can fail. This - * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore. + * v6_flush_icache_all() + * + * Flush the whole I-cache. * - * Registers: - * r0 - set to 0 - * r1 - corrupted + * ARM1136 erratum 411920 - Invalidate Instruction Cache operation can fail. + * This erratum is present in 1136, 1156 and 1176. It does not affect the + * MPCore. + * + * Registers: + * r0 - set to 0 + * r1 - corrupted */ -ENTRY(v6_icache_inval_all) +ENTRY(v6_flush_icache_all) mov r0, #0 +#ifdef CONFIG_ARM_ERRATA_411920 mrs r1, cpsr cpsid ifa @ disable interrupts mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache @@ -43,8 +47,11 @@ ENTRY(v6_icache_inval_all) .rept 11 @ ARM Ltd recommends at least nop @ 11 NOPs .endr - mov pc, lr +#else + mcr p15, 0, r0, c7, c5, 0 @ invalidate I-cache #endif + mov pc, lr +ENDPROC(v6_flush_icache_all) /* * v6_flush_cache_all() @@ -60,7 +67,7 @@ ENTRY(v6_flush_kern_cache_all) #ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else - b v6_icache_inval_all + b v6_flush_icache_all #endif #else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate @@ -138,7 +145,7 @@ ENTRY(v6_coherent_user_range) #ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else - b v6_icache_inval_all + b v6_flush_icache_all #endif #else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB @@ -312,6 +319,7 @@ ENDPROC(v6_dma_unmap_area) .type v6_cache_fns, #object ENTRY(v6_cache_fns) + .long v6_flush_icache_all .long v6_flush_kern_cache_all .long v6_flush_user_cache_all .long v6_flush_user_cache_range diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 37c8157e116e..a3ebf7a4f49b 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -18,6 +18,21 @@ #include "proc-macros.S" /* + * v7_flush_icache_all() + * + * Flush the whole I-cache. + * + * Registers: + * r0 - set to 0 + */ +ENTRY(v7_flush_icache_all) + mov r0, #0 + ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate + mov pc, lr +ENDPROC(v7_flush_icache_all) + +/* * v7_flush_dcache_all() * * Flush the whole D-cache. @@ -91,11 +106,8 @@ ENTRY(v7_flush_kern_cache_all) THUMB( stmfd sp!, {r4-r7, r9-r11, lr} ) bl v7_flush_dcache_all mov r0, #0 -#ifdef CONFIG_SMP - mcr p15, 0, r0, c7, c1, 0 @ invalidate I-cache inner shareable -#else - mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate -#endif + ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) mov pc, lr @@ -171,11 +183,8 @@ ENTRY(v7_coherent_user_range) cmp r0, r1 blo 1b mov r0, #0 -#ifdef CONFIG_SMP - mcr p15, 0, r0, c7, c1, 6 @ invalidate BTB Inner Shareable -#else - mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB -#endif + ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB dsb isb mov pc, lr @@ -309,6 +318,7 @@ ENDPROC(v7_dma_unmap_area) .type v7_cache_fns, #object ENTRY(v7_cache_fns) + .long v7_flush_icache_all .long v7_flush_kern_cache_all .long v7_flush_user_cache_all .long v7_flush_user_cache_range diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index 598c51ad5071..b8061519ce77 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -73,7 +73,7 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from, { void *kto = kmap_atomic(to, KM_USER1); - if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); spin_lock(&minicache_lock); diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index f55fa1044f72..bdba6c65c901 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -79,7 +79,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to, unsigned int offset = CACHE_COLOUR(vaddr); unsigned long kfrom, kto; - if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); /* FIXME: not highmem safe */ diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 9920c0ae2096..649bbcd325bf 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -95,7 +95,7 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from, { void *kto = kmap_atomic(to, KM_USER1); - if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); spin_lock(&minicache_lock); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4bc43e535d3b..e4dd0646e859 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -523,6 +523,12 @@ void ___dma_page_dev_to_cpu(struct page *page, unsigned long off, outer_inv_range(paddr, paddr + size); dma_cache_maint_page(page, off, size, dir, dmac_unmap_area); + + /* + * Mark the D-cache clean for this page to avoid extra flushing. + */ + if (dir != DMA_TO_DEVICE && off == 0 && size >= PAGE_SIZE) + set_bit(PG_dcache_clean, &page->flags); } EXPORT_SYMBOL(___dma_page_dev_to_cpu); diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 9b906dec1ca1..8440d952ba6d 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -28,6 +28,7 @@ static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE; +#if __LINUX_ARM_ARCH__ < 6 /* * We take the easy way out of this problem - we make the * PTE uncacheable. However, we leave the write buffer on. @@ -141,7 +142,7 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma, * a page table, or changing an existing PTE. Basically, there are two * things that we need to take care of: * - * 1. If PG_dcache_dirty is set for the page, we need to ensure + * 1. If PG_dcache_clean is not set for the page, we need to ensure * that any cache entries for the kernels virtual memory * range are written back to the page. * 2. If we have multiple shared mappings of the same space in @@ -168,10 +169,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, return; mapping = page_mapping(page); -#ifndef CONFIG_SMP - if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) + if (!test_and_set_bit(PG_dcache_clean, &page->flags)) __flush_dcache_page(mapping, page); -#endif if (mapping) { if (cache_is_vivt()) make_coherent(mapping, vma, addr, ptep, pfn); @@ -179,6 +178,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, __flush_icache_all(); } } +#endif /* __LINUX_ARM_ARCH__ < 6 */ /* * Check whether the write buffer has physical address aliasing diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 23b0b03af5ea..1e21e125fe3a 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -581,6 +581,19 @@ static struct fsr_info ifsr_info[] = { { do_bad, SIGBUS, 0, "unknown 31" }, }; +void __init +hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), + int sig, int code, const char *name) +{ + if (nr < 0 || nr >= ARRAY_SIZE(ifsr_info)) + BUG(); + + ifsr_info[nr].fn = fn; + ifsr_info[nr].sig = sig; + ifsr_info[nr].code = code; + ifsr_info[nr].name = name; +} + asmlinkage void __exception do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) { diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index c6844cb9b508..391ffae75098 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -17,6 +17,7 @@ #include <asm/smp_plat.h> #include <asm/system.h> #include <asm/tlbflush.h> +#include <asm/smp_plat.h> #include "mm.h" @@ -39,6 +40,18 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) : "cc"); } +static void flush_icache_alias(unsigned long pfn, unsigned long vaddr, unsigned long len) +{ + unsigned long colour = CACHE_COLOUR(vaddr); + unsigned long offset = vaddr & (PAGE_SIZE - 1); + unsigned long to; + + set_pte_ext(TOP_PTE(ALIAS_FLUSH_START) + colour, pfn_pte(pfn, PAGE_KERNEL), 0); + to = ALIAS_FLUSH_START + (colour << PAGE_SHIFT) + offset; + flush_tlb_kernel_page(to); + flush_icache_range(to, to + len); +} + void flush_cache_mm(struct mm_struct *mm) { if (cache_is_vivt()) { @@ -89,16 +102,16 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged()) __flush_icache_all(); } + #else -#define flush_pfn_alias(pfn,vaddr) do { } while (0) +#define flush_pfn_alias(pfn,vaddr) do { } while (0) +#define flush_icache_alias(pfn,vaddr,len) do { } while (0) #endif -#ifdef CONFIG_SMP static void flush_ptrace_access_other(void *args) { __flush_icache_all(); } -#endif static void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, @@ -118,15 +131,16 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, return; } - /* VIPT non-aliasing cache */ + /* VIPT non-aliasing D-cache */ if (vma->vm_flags & VM_EXEC) { unsigned long addr = (unsigned long)kaddr; - __cpuc_coherent_kern_range(addr, addr + len); -#ifdef CONFIG_SMP + if (icache_is_vipt_aliasing()) + flush_icache_alias(page_to_pfn(page), uaddr, len); + else + __cpuc_coherent_kern_range(addr, addr + len); if (cache_ops_need_broadcast()) smp_call_function(flush_ptrace_access_other, NULL, 1); -#endif } } @@ -215,6 +229,36 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p flush_dcache_mmap_unlock(mapping); } +#if __LINUX_ARM_ARCH__ >= 6 +void __sync_icache_dcache(pte_t pteval) +{ + unsigned long pfn; + struct page *page; + struct address_space *mapping; + + if (!pte_present_user(pteval)) + return; + if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) + /* only flush non-aliasing VIPT caches for exec mappings */ + return; + pfn = pte_pfn(pteval); + if (!pfn_valid(pfn)) + return; + + page = pfn_to_page(pfn); + if (cache_is_vipt_aliasing()) + mapping = page_mapping(page); + else + mapping = NULL; + + if (!test_and_set_bit(PG_dcache_clean, &page->flags)) + __flush_dcache_page(mapping, page); + /* pte_exec() already checked above for non-aliasing VIPT cache */ + if (cache_is_vipt_nonaliasing() || pte_exec(pteval)) + __flush_icache_all(); +} +#endif + /* * Ensure cache coherency between kernel mapping and userspace mapping * of this page. @@ -246,17 +290,16 @@ void flush_dcache_page(struct page *page) mapping = page_mapping(page); -#ifndef CONFIG_SMP - if (!PageHighMem(page) && mapping && !mapping_mapped(mapping)) - set_bit(PG_dcache_dirty, &page->flags); - else -#endif - { + if (!cache_ops_need_broadcast() && + mapping && !mapping_mapped(mapping)) + clear_bit(PG_dcache_clean, &page->flags); + else { __flush_dcache_page(mapping, page); if (mapping && cache_is_vivt()) __flush_dcache_aliases(mapping, page); else if (mapping) __flush_icache_all(); + set_bit(PG_dcache_clean, &page->flags); } } EXPORT_SYMBOL(flush_dcache_page); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 7185b00650fe..7fd9b5eb177f 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -150,6 +150,7 @@ static void __init find_limits(struct meminfo *mi, static void __init arm_bootmem_init(struct meminfo *mi, unsigned long start_pfn, unsigned long end_pfn) { + struct memblock_region *reg; unsigned int boot_pages; phys_addr_t bitmap; pg_data_t *pgdat; @@ -180,13 +181,13 @@ static void __init arm_bootmem_init(struct meminfo *mi, /* * Reserve the memblock reserved regions in bootmem. */ - for (i = 0; i < memblock.reserved.cnt; i++) { - phys_addr_t start = memblock_start_pfn(&memblock.reserved, i); - if (start >= start_pfn && - memblock_end_pfn(&memblock.reserved, i) <= end_pfn) + for_each_memblock(reserved, reg) { + phys_addr_t start = memblock_region_reserved_base_pfn(reg); + phys_addr_t end = memblock_region_reserved_end_pfn(reg); + if (start >= start_pfn && end <= end_pfn) reserve_bootmem_node(pgdat, __pfn_to_phys(start), - memblock_size_bytes(&memblock.reserved, i), - BOOTMEM_DEFAULT); + (end - start) << PAGE_SHIFT, + BOOTMEM_DEFAULT); } } @@ -237,20 +238,7 @@ static void __init arm_bootmem_free(struct meminfo *mi, unsigned long min, #ifndef CONFIG_SPARSEMEM int pfn_valid(unsigned long pfn) { - struct memblock_region *mem = &memblock.memory; - unsigned int left = 0, right = mem->cnt; - - do { - unsigned int mid = (right + left) / 2; - - if (pfn < memblock_start_pfn(mem, mid)) - right = mid; - else if (pfn >= memblock_end_pfn(mem, mid)) - left = mid + 1; - else - return 1; - } while (left < right); - return 0; + return memblock_is_memory(pfn << PAGE_SHIFT); } EXPORT_SYMBOL(pfn_valid); @@ -260,10 +248,11 @@ static void arm_memory_present(void) #else static void arm_memory_present(void) { - int i; - for (i = 0; i < memblock.memory.cnt; i++) - memory_present(0, memblock_start_pfn(&memblock.memory, i), - memblock_end_pfn(&memblock.memory, i)); + struct memblock_region *reg; + + for_each_memblock(memory, reg) + memory_present(0, memblock_region_memory_base_pfn(reg), + memblock_region_memory_end_pfn(reg)); } #endif @@ -277,7 +266,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) /* Register the kernel text, kernel data and initrd with memblock. */ #ifdef CONFIG_XIP_KERNEL - memblock_reserve(__pa(_data), _end - _data); + memblock_reserve(__pa(_sdata), _end - _sdata); #else memblock_reserve(__pa(_stext), _end - _stext); #endif @@ -545,7 +534,7 @@ void __init mem_init(void) MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_text, _etext), - MLK_ROUNDUP(_data, _edata)); + MLK_ROUNDUP(_sdata, _edata)); #undef MLK #undef MLM diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 4f5b39687df5..b0a98305055c 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -144,3 +144,25 @@ int valid_mmap_phys_addr_range(unsigned long pfn, size_t size) { return !(pfn + (size >> PAGE_SHIFT) > 0x00100000); } + +#ifdef CONFIG_STRICT_DEVMEM + +#include <linux/ioport.h> + +/* + * devmem_is_allowed() checks to see if /dev/mem access to a certain + * address is valid. The argument is a physical page number. + * We mimic x86 here by disallowing access to system RAM as well as + * device-exclusive MMIO regions. This effectively disable read()/write() + * on /dev/mem. + */ +int devmem_is_allowed(unsigned long pfn) +{ + if (iomem_is_exclusive(pfn << PAGE_SHIFT)) + return 0; + if (!page_is_ram(pfn)) + return 1; + return 0; +} + +#endif diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e8ed9dc461fe..c32f731d56d3 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -310,9 +310,8 @@ static void __init build_mem_type_table(void) cachepolicy = CPOLICY_WRITEBACK; ecc_mask = 0; } -#ifdef CONFIG_SMP - cachepolicy = CPOLICY_WRITEALLOC; -#endif + if (is_smp()) + cachepolicy = CPOLICY_WRITEALLOC; /* * Strip out features not present on earlier architectures. @@ -406,13 +405,11 @@ static void __init build_mem_type_table(void) cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; -#ifndef CONFIG_SMP /* * Only use write-through for non-SMP systems */ - if (cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH) + if (!is_smp() && cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH) vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte; -#endif /* * Enable CPU-specific coherency if supported. @@ -436,22 +433,23 @@ static void __init build_mem_type_table(void) mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; -#ifdef CONFIG_SMP - /* - * Mark memory with the "shared" attribute for SMP systems - */ - user_pgprot |= L_PTE_SHARED; - kern_pgprot |= L_PTE_SHARED; - vecs_pgprot |= L_PTE_SHARED; - mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S; - mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED; - mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; - mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED; - mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; - mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED; -#endif + if (is_smp()) { + /* + * Mark memory with the "shared" attribute + * for SMP systems + */ + user_pgprot |= L_PTE_SHARED; + kern_pgprot |= L_PTE_SHARED; + vecs_pgprot |= L_PTE_SHARED; + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S; + mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED; + mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED; + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; + mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED; + } } /* @@ -829,8 +827,7 @@ static void __init sanity_check_meminfo(void) * rather difficult. */ reason = "with VIPT aliasing cache"; -#ifdef CONFIG_SMP - } else if (tlb_ops_need_broadcast()) { + } else if (is_smp() && tlb_ops_need_broadcast()) { /* * kmap_high needs to occasionally flush TLB entries, * however, if the TLB entries need to be broadcast @@ -840,7 +837,6 @@ static void __init sanity_check_meminfo(void) * (must not be called with irqs off) */ reason = "without hardware TLB ops broadcasting"; -#endif } if (reason) { printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n", diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 203a4e944d9e..a6f5f8475b96 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -430,7 +430,7 @@ ENTRY(cpu_arm1020_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __INIT + __CPUINIT .type __arm1020_setup, #function __arm1020_setup: diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 1a511e765909..afc06b9c3133 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -412,7 +412,7 @@ ENTRY(cpu_arm1020e_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __INIT + __CPUINIT .type __arm1020e_setup, #function __arm1020e_setup: diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 1ffa4eb9c34f..8915e0ba3fe5 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -394,7 +394,7 @@ ENTRY(cpu_arm1022_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __INIT + __CPUINIT .type __arm1022_setup, #function __arm1022_setup: diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 5697c34b95b0..ff446c5d476f 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -384,7 +384,7 @@ ENTRY(cpu_arm1026_set_pte_ext) mov pc, lr - __INIT + __CPUINIT .type __arm1026_setup, #function __arm1026_setup: diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 64e0b327c7c5..6a7be1863edd 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -238,7 +238,7 @@ ENTRY(cpu_arm7_reset) mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc mov pc, r0 - __INIT + __CPUINIT .type __arm6_setup, #function __arm6_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 9d96824134fc..c285395f44b2 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -113,7 +113,7 @@ ENTRY(cpu_arm720_reset) mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 - __INIT + __CPUINIT .type __arm710_setup, #function __arm710_setup: diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 6c1a9ab059ae..38b27dcba727 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -55,7 +55,7 @@ ENTRY(cpu_arm740_reset) mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 - __INIT + __CPUINIT .type __arm740_setup, #function __arm740_setup: diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 6a850dbba22e..0c9786de20af 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -46,7 +46,7 @@ ENTRY(cpu_arm7tdmi_proc_fin) ENTRY(cpu_arm7tdmi_reset) mov pc, r0 - __INIT + __CPUINIT .type __arm7tdmi_setup, #function __arm7tdmi_setup: diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 86f80aa56216..fecf570939f3 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -375,7 +375,7 @@ ENTRY(cpu_arm920_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __arm920_setup, #function __arm920_setup: diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index f76ce9b62883..e3cbf87c9480 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -379,7 +379,7 @@ ENTRY(cpu_arm922_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __INIT + __CPUINIT .type __arm922_setup, #function __arm922_setup: diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 657bd3f7c153..572424c867b5 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -428,7 +428,7 @@ ENTRY(cpu_arm925_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __INIT + __CPUINIT .type __arm925_setup, #function __arm925_setup: diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 73f1f3c68910..63d168b4ebe6 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -389,7 +389,7 @@ ENTRY(cpu_arm926_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __arm926_setup, #function __arm926_setup: diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index fffb061a45a5..f6a62822418e 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -264,7 +264,7 @@ ENTRY(arm940_cache_fns) .long arm940_dma_unmap_area .long arm940_dma_flush_range - __INIT + __CPUINIT .type __arm940_setup, #function __arm940_setup: diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 249a6053760a..ea2e7f2eb95b 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -317,7 +317,7 @@ ENTRY(cpu_arm946_dcache_clean_area) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr - __INIT + __CPUINIT .type __arm946_setup, #function __arm946_setup: diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index db475667fac2..db67e3134d7a 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -46,7 +46,7 @@ ENTRY(cpu_arm9tdmi_proc_fin) ENTRY(cpu_arm9tdmi_reset) mov pc, r0 - __INIT + __CPUINIT .type __arm9tdmi_setup, #function __arm9tdmi_setup: diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 7803fdf70029..7c9ad621f0e6 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -134,7 +134,7 @@ ENTRY(cpu_fa526_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __fa526_setup, #function __fa526_setup: diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index b304d0104a4e..578da69200cf 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -494,7 +494,7 @@ ENTRY(cpu_feroceon_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __feroceon_setup, #function __feroceon_setup: diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 5f6892fcc167..4458ee6aa713 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -338,7 +338,7 @@ ENTRY(cpu_mohawk_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr - __INIT + __CPUINIT .type __mohawk_setup, #function __mohawk_setup: diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index a201eb04b5e1..5aa8d59c2e85 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -156,7 +156,7 @@ ENTRY(cpu_sa110_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __sa110_setup, #function __sa110_setup: diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 7ddc4805bf97..2ac4e6f10713 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -169,7 +169,7 @@ ENTRY(cpu_sa1100_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __sa1100_setup, #function __sa1100_setup: diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 22aac8515196..59a7e1ffe7bc 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -30,13 +30,10 @@ #define TTB_RGN_WT (2 << 3) #define TTB_RGN_WB (3 << 3) -#ifndef CONFIG_SMP -#define TTB_FLAGS TTB_RGN_WBWA -#define PMD_FLAGS PMD_SECT_WB -#else -#define TTB_FLAGS TTB_RGN_WBWA|TTB_S -#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S -#endif +#define TTB_FLAGS_UP TTB_RGN_WBWA +#define PMD_FLAGS_UP PMD_SECT_WB +#define TTB_FLAGS_SMP TTB_RGN_WBWA|TTB_S +#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S ENTRY(cpu_v6_proc_init) mov pc, lr @@ -97,7 +94,8 @@ ENTRY(cpu_v6_switch_mm) #ifdef CONFIG_MMU mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id - orr r0, r0, #TTB_FLAGS + ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) + ALT_UP(orr r0, r0, #TTB_FLAGS_UP) mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -137,7 +135,7 @@ cpu_pj4_name: .align - __INIT + __CPUINIT /* * __v6_setup @@ -156,9 +154,11 @@ cpu_pj4_name: */ __v6_setup: #ifdef CONFIG_SMP - mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode + ALT_SMP(mrc p15, 0, r0, c1, c0, 1) @ Enable SMP/nAMP mode + ALT_UP(nop) orr r0, r0, #0x20 - mcr p15, 0, r0, c1, c0, 1 + ALT_SMP(mcr p15, 0, r0, c1, c0, 1) + ALT_UP(nop) #endif mov r0, #0 @@ -169,7 +169,8 @@ __v6_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register - orr r4, r4, #TTB_FLAGS + ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) + ALT_UP(orr r4, r4, #TTB_FLAGS_UP) mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ adr r5, v6_crval @@ -192,6 +193,8 @@ __v6_setup: v6_crval: crval clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c + __INITDATA + .type v6_processor_functions, #object ENTRY(v6_processor_functions) .word v6_early_abort @@ -205,6 +208,8 @@ ENTRY(v6_processor_functions) .word cpu_v6_set_pte_ext .size v6_processor_functions, . - v6_processor_functions + .section ".rodata" + .type cpu_arch_name, #object cpu_arch_name: .asciz "armv6" @@ -225,10 +230,16 @@ cpu_elf_name: __v6_proc_info: .long 0x0007b000 .long 0x0007f000 - .long PMD_TYPE_SECT | \ + ALT_SMP(.long \ + PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | \ - PMD_FLAGS + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_UP) .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ @@ -249,10 +260,16 @@ __v6_proc_info: __pj4_v6_proc_info: .long 0x560f5810 .long 0xff0ffff0 - .long PMD_TYPE_SECT | \ + ALT_SMP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | \ - PMD_FLAGS + PMD_FLAGS_UP) .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 197f21bed5e9..53cbe2225153 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -30,15 +30,13 @@ #define TTB_IRGN_WT ((1 << 0) | (0 << 6)) #define TTB_IRGN_WB ((1 << 0) | (1 << 6)) -#ifndef CONFIG_SMP /* PTWs cacheable, inner WB not shareable, outer WB not shareable */ -#define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB -#define PMD_FLAGS PMD_SECT_WB -#else +#define TTB_FLAGS_UP TTB_IRGN_WB|TTB_RGN_OC_WB +#define PMD_FLAGS_UP PMD_SECT_WB + /* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */ -#define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA -#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S -#endif +#define TTB_FLAGS_SMP TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA +#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S ENTRY(cpu_v7_proc_init) mov pc, lr @@ -105,7 +103,8 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_MMU mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id - orr r0, r0, #TTB_FLAGS + ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) + ALT_UP(orr r0, r0, #TTB_FLAGS_UP) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif @@ -169,7 +168,7 @@ cpu_v7_name: .ascii "ARMv7 Processor" .align - __INIT + __CPUINIT /* * __v7_setup @@ -188,7 +187,8 @@ cpu_v7_name: */ __v7_ca9mp_setup: #ifdef CONFIG_SMP - mrc p15, 0, r0, c1, c0, 1 + ALT_SMP(mrc p15, 0, r0, c1, c0, 1) + ALT_UP(mov r0, #(1 << 6)) @ fake it for UP tst r0, #(1 << 6) @ SMP/nAMP mode enabled? orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting @@ -270,7 +270,8 @@ __v7_setup: #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r10, c2, c0, 2 @ TTB control register - orr r4, r4, #TTB_FLAGS + ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) + ALT_UP(orr r4, r4, #TTB_FLAGS_UP) mcr p15, 0, r4, c2, c0, 1 @ load TTB1 mov r10, #0x1f @ domains 0, 1 = manager mcr p15, 0, r10, c3, c0, 0 @ load domain access register @@ -332,6 +333,8 @@ v7_crval: __v7_setup_stack: .space 4 * 11 @ 11 registers + __INITDATA + .type v7_processor_functions, #object ENTRY(v7_processor_functions) .word v7_early_abort @@ -345,6 +348,8 @@ ENTRY(v7_processor_functions) .word cpu_v7_set_pte_ext .size v7_processor_functions, . - v7_processor_functions + .section ".rodata" + .type cpu_arch_name, #object cpu_arch_name: .asciz "armv7" @@ -362,10 +367,16 @@ cpu_elf_name: __v7_ca9mp_proc_info: .long 0x410fc090 @ Required ID value .long 0xff0ffff0 @ Mask for ID - .long PMD_TYPE_SECT | \ + ALT_SMP(.long \ + PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | \ - PMD_FLAGS + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_UP) .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ @@ -388,10 +399,16 @@ __v7_ca9mp_proc_info: __v7_proc_info: .long 0x000f0000 @ Required ID value .long 0x000f0000 @ Mask for ID - .long PMD_TYPE_SECT | \ + ALT_SMP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | \ - PMD_FLAGS + PMD_FLAGS_UP) .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 361a51e49030..cad07e403044 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -404,7 +404,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .align - __INIT + __CPUINIT .type __xsc3_setup, #function __xsc3_setup: diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 14075979bcba..cb245edb2c2b 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -506,7 +506,7 @@ ENTRY(cpu_xscale_set_pte_ext) .align - __INIT + __CPUINIT .type __xscale_setup, #function __xscale_setup: diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index f3f288a9546d..53cd5b454673 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -13,6 +13,7 @@ */ #include <linux/init.h> #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/page.h> #include <asm/tlbflush.h> @@ -41,20 +42,15 @@ ENTRY(v7wbi_flush_user_tlb_range) orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT 1: -#ifdef CONFIG_SMP - mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable) -#else - mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA -#endif + ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable) + ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA + add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b mov ip, #0 -#ifdef CONFIG_SMP - mcr p15, 0, ip, c7, c1, 6 @ flush BTAC/BTB Inner Shareable -#else - mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB -#endif + ALT_SMP(mcr p15, 0, ip, c7, c1, 6) @ flush BTAC/BTB Inner Shareable + ALT_UP(mcr p15, 0, ip, c7, c5, 6) @ flush BTAC/BTB dsb mov pc, lr ENDPROC(v7wbi_flush_user_tlb_range) @@ -74,20 +70,14 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov r0, r0, lsl #PAGE_SHIFT mov r1, r1, lsl #PAGE_SHIFT 1: -#ifdef CONFIG_SMP - mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable) -#else - mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA -#endif + ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable) + ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b mov r2, #0 -#ifdef CONFIG_SMP - mcr p15, 0, r2, c7, c1, 6 @ flush BTAC/BTB Inner Shareable -#else - mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB -#endif + ALT_SMP(mcr p15, 0, r2, c7, c1, 6) @ flush BTAC/BTB Inner Shareable + ALT_UP(mcr p15, 0, r2, c7, c5, 6) @ flush BTAC/BTB dsb isb mov pc, lr @@ -99,5 +89,6 @@ ENDPROC(v7wbi_flush_kern_tlb_range) ENTRY(v7wbi_tlb_fns) .long v7wbi_flush_user_tlb_range .long v7wbi_flush_kern_tlb_range - .long v7wbi_tlb_flags + ALT_SMP(.long v7wbi_tlb_flags_smp) + ALT_UP(.long v7wbi_tlb_flags_up) .size v7wbi_tlb_fns, . - v7wbi_tlb_fns diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 6785db4179b8..64e3a64520e0 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -92,6 +92,18 @@ config MXC_DEBUG_BOARD data/address de-multiplexing and decode, signal level shift, interrupt control and various board functions. +config HAVE_EPIT + bool + +config MXC_USE_EPIT + bool "Use EPIT instead of GPT" + depends on HAVE_EPIT + help + Use EPIT as the system timer on systems that have it. Normally you + don't have a reason to do so as the EPIT has the same features and + uses the same clocks as the GPT. Anyway, on some systems the GPT + may be in use for other purposes. + config MXC_ULPI bool @@ -110,4 +122,8 @@ config ARCH_MXC_AUDMUX_V1 config ARCH_MXC_AUDMUX_V2 bool +config IRAM_ALLOC + bool + select GENERIC_ALLOCATOR + endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 78d405ed8616..06875b4dd70f 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -10,9 +10,11 @@ obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o +obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_USB_EHCI_MXC) += ehci.o obj-$(CONFIG_MXC_ULPI) += ulpi.o +obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index f9e7cdbd0005..62920490c0d6 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -186,7 +186,13 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port); static int mxc_audmux_v2_init(void) { int ret; - +#if defined(CONFIG_ARCH_MX5) + if (cpu_is_mx51()) { + audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR); + ret = 0; + return ret; + } +#endif #if defined(CONFIG_ARCH_MX3) if (cpu_is_mx31()) audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig index 9ab784b776f9..404799487f17 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -1,3 +1,10 @@ +config IMX_HAVE_PLATFORM_ESDHC + bool + +config IMX_HAVE_PLATFORM_FEC + bool + default y if ARCH_MX25 || SOC_IMX27 || ARCH_MX35 || ARCH_MX51 + config IMX_HAVE_PLATFORM_FLEXCAN select HAVE_CAN_FLEXCAN bool @@ -5,6 +12,9 @@ config IMX_HAVE_PLATFORM_FLEXCAN config IMX_HAVE_PLATFORM_IMX_I2C bool +config IMX_HAVE_PLATFORM_IMX_SSI + bool + config IMX_HAVE_PLATFORM_IMX_UART bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index 347da5161f7e..0a3c1f089413 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -1,8 +1,9 @@ -ifdef CONFIG_CAN_FLEXCAN -# the ifdef can be removed once the flexcan driver has been merged -obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o -endif +obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o +obj-y += platform-imx-dma.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o diff --git a/arch/arm/plat-mxc/devices/platform-esdhc.c b/arch/arm/plat-mxc/devices/platform-esdhc.c new file mode 100644 index 000000000000..2605bfa0dfb0 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-esdhc.c @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <mach/hardware.h> +#include <mach/devices-common.h> +#include <mach/esdhc.h> + +#define imx_esdhc_imx_data_entry_single(soc, _id, hwid) \ + { \ + .id = _id, \ + .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \ + .irq = soc ## _INT_ESDHC ## hwid, \ + } + +#define imx_esdhc_imx_data_entry(soc, id, hwid) \ + [id] = imx_esdhc_imx_data_entry_single(soc, id, hwid) + +#ifdef CONFIG_ARCH_MX25 +const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst = { +#define imx25_esdhc_data_entry(_id, _hwid) \ + imx_esdhc_imx_data_entry(MX25, _id, _hwid) + imx25_esdhc_data_entry(0, 1), + imx25_esdhc_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst = { +#define imx35_esdhc_data_entry(_id, _hwid) \ + imx_esdhc_imx_data_entry(MX35, _id, _hwid) + imx35_esdhc_data_entry(0, 1), + imx35_esdhc_data_entry(1, 2), + imx35_esdhc_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst = { +#define imx51_esdhc_data_entry(_id, _hwid) \ + imx_esdhc_imx_data_entry(MX51, _id, _hwid) + imx51_esdhc_data_entry(0, 1), + imx51_esdhc_data_entry(1, 2), + imx51_esdhc_data_entry(2, 3), + imx51_esdhc_data_entry(3, 4), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_esdhc( + const struct imx_esdhc_imx_data *data, + const struct esdhc_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("sdhci-esdhc-imx", data->id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c new file mode 100644 index 000000000000..11d087f4e219 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_fec_data_entry_single(soc) \ + { \ + .iobase = soc ## _FEC_BASE_ADDR, \ + .irq = soc ## _INT_FEC, \ + } + +#ifdef CONFIG_ARCH_MX25 +const struct imx_fec_data imx25_fec_data __initconst = + imx_fec_data_entry_single(MX25); +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_fec_data imx27_fec_data __initconst = + imx_fec_data_entry_single(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_fec_data imx35_fec_data __initconst = + imx_fec_data_entry_single(MX35); +#endif + +#ifdef CONFIG_ARCH_MX51 +const struct imx_fec_data imx51_fec_data __initconst = + imx_fec_data_entry_single(MX51); +#endif + +struct platform_device *__init imx_add_fec( + const struct imx_fec_data *data, + const struct fec_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("fec", 0 /* -1? */, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c new file mode 100644 index 000000000000..02d989018059 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/hardware.h> +#include <mach/devices-common.h> +#ifdef SDMA_IS_MERGED +#include <mach/sdma.h> +#else +struct sdma_platform_data { + int sdma_version; + char *cpu_name; + int to_version; +}; +#endif + +struct imx_imx_sdma_data { + resource_size_t iobase; + resource_size_t irq; + struct sdma_platform_data pdata; +}; + +#define imx_imx_sdma_data_entry_single(soc, _sdma_version, _cpu_name, _to_version)\ + { \ + .iobase = soc ## _SDMA ## _BASE_ADDR, \ + .irq = soc ## _INT_SDMA, \ + .pdata = { \ + .sdma_version = _sdma_version, \ + .cpu_name = _cpu_name, \ + .to_version = _to_version, \ + }, \ + } + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_sdma_data imx25_imx_sdma_data __initconst = + imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0); +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_ARCH_MX31 +struct imx_imx_sdma_data imx31_imx_sdma_data __initdata = + imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0); +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +struct imx_imx_sdma_data imx35_imx_sdma_data __initdata = + imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0); +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_sdma_data imx51_imx_sdma_data __initconst = + imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0); +#endif /* ifdef CONFIG_ARCH_MX51 */ + +static struct platform_device __init __maybe_unused *imx_add_imx_sdma( + const struct imx_imx_sdma_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-sdma", -1, + res, ARRAY_SIZE(res), + &data->pdata, sizeof(data->pdata)); +} + +static struct platform_device __init __maybe_unused *imx_add_imx_dma(void) +{ + return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0); +} + +static int __init imxXX_add_imx_dma(void) +{ + struct platform_device *ret; + +#if defined(CONFIG_SOC_IMX21) || defined(CONFIG_SOC_IMX27) + if (cpu_is_mx21() || cpu_is_mx27()) + ret = imx_add_imx_dma(); + else +#endif + +#if defined(CONFIG_ARCH_MX25) + if (cpu_is_mx25()) + ret = imx_add_imx_sdma(&imx25_imx_sdma_data); + else +#endif + +#if defined(CONFIG_ARCH_MX31) + if (cpu_is_mx31()) { + imx31_imx_sdma_data.pdata.to_version = mx31_revision() >> 4; + ret = imx_add_imx_sdma(&imx31_imx_sdma_data); + } else +#endif + +#if defined(CONFIG_ARCH_MX35) + if (cpu_is_mx35()) { + imx35_imx_sdma_data.pdata.to_version = mx35_revision() >> 4; + ret = imx_add_imx_sdma(&imx35_imx_sdma_data); + } else +#endif + +#if defined(CONFIG_ARCH_MX51) + if (cpu_is_mx51()) + ret = imx_add_imx_sdma(&imx51_imx_sdma_data); + else +#endif + ret = ERR_PTR(-ENODEV); + + if (IS_ERR(ret)) + return PTR_ERR(ret); + + return 0; +} +arch_initcall(imxXX_add_imx_dma); diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c index d0af9f7d8aed..679588453aad 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -6,24 +6,95 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <mach/hardware.h> #include <mach/devices-common.h> -struct platform_device *__init imx_add_imx_i2c(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_I2C ## _hwid, \ + } + +#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size) \ + [_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX1 +const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst = + imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX1 */ + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = + imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { +#define imx25_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K) + imx25_imx_i2c_data_entry(0, 1), + imx25_imx_i2c_data_entry(1, 2), + imx25_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { +#define imx27_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_i2c_data_entry(0, 1), + imx27_imx_i2c_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { +#define imx31_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_i2c_data_entry(0, 1), + imx31_imx_i2c_data_entry(1, 2), + imx31_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { +#define imx35_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K) + imx35_imx_i2c_data_entry(0, 1), + imx35_imx_i2c_data_entry(1, 2), + imx35_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { +#define imx51_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_i2c_data_entry(0, 1), + imx51_imx_i2c_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_i2c( + const struct imx_imx_i2c_data *data, const struct imxi2c_platform_data *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-i2c", id, res, ARRAY_SIZE(res), + return imx_add_platform_device("imx-i2c", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c new file mode 100644 index 000000000000..38a7a0b8f2f1 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_SSI ## _hwid, \ + .dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \ + .dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \ + .dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \ + .dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = { +#define imx21_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K) + imx21_imx_ssi_data_entry(0, 1), + imx21_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = { +#define imx25_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K) + imx25_imx_ssi_data_entry(0, 1), + imx25_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = { +#define imx27_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_ssi_data_entry(0, 1), + imx27_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = { +#define imx31_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_ssi_data_entry(0, 1), + imx31_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = { +#define imx35_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K) + imx35_imx_ssi_data_entry(0, 1), + imx35_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = { +#define imx51_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_ssi_data_entry(0, 1), + imx51_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_ssi( + const struct imx_imx_ssi_data *data, + const struct imx_ssi_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, +#define DMARES(_name) { \ + .name = #_name, \ + .start = data->dma ## _name, \ + .end = data->dma ## _name, \ + .flags = IORESOURCE_DMA, \ +} + DMARES(tx0), + DMARES(rx0), + DMARES(tx1), + DMARES(rx1), + }; + + return imx_add_platform_device("imx-ssi", data->id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c index fa3dff1433e8..2039640adf27 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -6,55 +6,148 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <mach/hardware.h> #include <mach/devices-common.h> -struct platform_device *__init imx_add_imx_uart_3irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irqrx, resource_size_t irqtx, - resource_size_t irqrts, +#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irqrx = soc ## _INT_UART ## _hwid ## RX, \ + .irqtx = soc ## _INT_UART ## _hwid ## TX, \ + .irqrts = soc ## _INT_UART ## _hwid ## RTS, \ + } + +#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_UART ## _hwid, \ + } + +#ifdef CONFIG_SOC_IMX1 +const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = { +#define imx1_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0) + imx1_imx_uart_data_entry(0, 1), + imx1_imx_uart_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX1 */ + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { +#define imx21_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K) + imx21_imx_uart_data_entry(0, 1), + imx21_imx_uart_data_entry(1, 2), + imx21_imx_uart_data_entry(2, 3), + imx21_imx_uart_data_entry(3, 4), +}; +#endif + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = { +#define imx25_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K) + imx25_imx_uart_data_entry(0, 1), + imx25_imx_uart_data_entry(1, 2), + imx25_imx_uart_data_entry(2, 3), + imx25_imx_uart_data_entry(3, 4), + imx25_imx_uart_data_entry(4, 5), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = { +#define imx27_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_uart_data_entry(0, 1), + imx27_imx_uart_data_entry(1, 2), + imx27_imx_uart_data_entry(2, 3), + imx27_imx_uart_data_entry(3, 4), + imx27_imx_uart_data_entry(4, 5), + imx27_imx_uart_data_entry(5, 6), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = { +#define imx31_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_uart_data_entry(0, 1), + imx31_imx_uart_data_entry(1, 2), + imx31_imx_uart_data_entry(2, 3), + imx31_imx_uart_data_entry(3, 4), + imx31_imx_uart_data_entry(4, 5), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { +#define imx35_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K) + imx35_imx_uart_data_entry(0, 1), + imx35_imx_uart_data_entry(1, 2), + imx35_imx_uart_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = { +#define imx51_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_uart_data_entry(0, 1), + imx51_imx_uart_data_entry(1, 2), + imx51_imx_uart_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_uart_3irq( + const struct imx_imx_uart_3irq_data *data, const struct imxuart_platform_data *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irqrx, - .end = irqrx, + .start = data->irqrx, + .end = data->irqrx, .flags = IORESOURCE_IRQ, }, { - .start = irqtx, - .end = irqtx, + .start = data->irqtx, + .end = data->irqtx, .flags = IORESOURCE_IRQ, }, { - .start = irqrts, - .end = irqrx, + .start = data->irqrts, + .end = data->irqrx, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); + return imx_add_platform_device("imx-uart", data->id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata)); } -struct platform_device *__init imx_add_imx_uart_1irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irq, +struct platform_device *__init imx_add_imx_uart_1irq( + const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res), + return imx_add_platform_device("imx-uart", data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c index 1c286418d123..3fdcc32e3d67 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c +++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c @@ -7,38 +7,77 @@ * Free Software Foundation. */ #include <asm/sizes.h> +#include <mach/hardware.h> #include <mach/devices-common.h> -static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata, - resource_size_t iosize) +#define imx_mxc_nand_data_entry_single(soc, _size) \ + { \ + .iobase = soc ## _NFC_BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_NFC \ + } + +#define imx_mxc_nandv3_data_entry_single(soc, _size) \ + { \ + .id = -1, \ + .iobase = soc ## _NFC_BASE_ADDR, \ + .iosize = _size, \ + .axibase = soc ## _NFC_AXI_BASE_ADDR, \ + .irq = soc ## _INT_NFC \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX21, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX25, SZ_8K); +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX27, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX31, SZ_4K); +#endif + +#ifdef CONFIG_ARCH_MX35 +const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX35, SZ_8K); +#endif + +#ifdef CONFIG_ARCH_MX51 +const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst = + imx_mxc_nandv3_data_entry_single(MX51, SZ_16K); +#endif + +struct platform_device *__init imx_add_mxc_nand( + const struct imx_mxc_nand_data *data, + const struct mxc_nand_platform_data *pdata) { - static int id = 0; - + /* AXI has to come first, that's how the mxc_nand driver expect it */ struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->axibase, + .end = data->axibase + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - - return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res), + return imx_add_platform_device("mxc_nand", data->id, + res + !data->axibase, + ARRAY_SIZE(res) - !data->axibase, pdata, sizeof(*pdata)); } - -struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata) -{ - return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K); -} - -struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata) -{ - return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K); -} diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index 2831a6d3eb4b..e48340ec331e 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -6,25 +6,96 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <asm/sizes.h> +#include <mach/hardware.h> #include <mach/devices-common.h> -struct platform_device *__init imx_add_spi_imx(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \ + { \ + .devid = _devid, \ + .id = _id, \ + .iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_ ## type ## hwid, \ + } + +#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \ + [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size) + +#ifdef CONFIG_SOC_IMX21 +const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { +#define imx21_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K) + imx21_cspi_data_entry(0, 1), + imx21_cspi_data_entry(1, 2), +#endif + +#ifdef CONFIG_ARCH_MX25 +const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { +#define imx25_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K) + imx25_cspi_data_entry(0, 1), + imx25_cspi_data_entry(1, 2), + imx25_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_spi_imx_data imx27_cspi_data[] __initconst = { +#define imx27_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K) + imx27_cspi_data_entry(0, 1), + imx27_cspi_data_entry(1, 2), + imx27_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_spi_imx_data imx31_cspi_data[] __initconst = { +#define imx31_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K) + imx31_cspi_data_entry(0, 1), + imx31_cspi_data_entry(1, 2), + imx31_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { +#define imx35_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K) + imx35_cspi_data_entry(0, 1), + imx35_cspi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_spi_imx_data imx51_cspi_data __initconst = + imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K); + +const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { +#define imx51_ecspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K) + imx51_ecspi_data_entry(0, 1), + imx51_ecspi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_spi_imx( + const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("spi_imx", id, res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); + return imx_add_platform_device(data->devid, data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 35a064ff02ba..9915607683de 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -249,8 +249,8 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) #ifdef CONFIG_ARCH_MX51 if (cpu_is_mx51()) { void __iomem *usb_base; - u32 usbotg_base; - u32 usbother_base; + void __iomem *usbotg_base; + void __iomem *usbother_base; int ret = 0; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c new file mode 100644 index 000000000000..ee9582f4972e --- /dev/null +++ b/arch/arm/plat-mxc/epit.c @@ -0,0 +1,242 @@ +/* + * linux/arch/arm/plat-mxc/epit.c + * + * Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#define EPITCR 0x00 +#define EPITSR 0x04 +#define EPITLR 0x08 +#define EPITCMPR 0x0c +#define EPITCNR 0x10 + +#define EPITCR_EN (1 << 0) +#define EPITCR_ENMOD (1 << 1) +#define EPITCR_OCIEN (1 << 2) +#define EPITCR_RLD (1 << 3) +#define EPITCR_PRESC(x) (((x) & 0xfff) << 4) +#define EPITCR_SWR (1 << 16) +#define EPITCR_IOVW (1 << 17) +#define EPITCR_DBGEN (1 << 18) +#define EPITCR_WAITEN (1 << 19) +#define EPITCR_RES (1 << 20) +#define EPITCR_STOPEN (1 << 21) +#define EPITCR_OM_DISCON (0 << 22) +#define EPITCR_OM_TOGGLE (1 << 22) +#define EPITCR_OM_CLEAR (2 << 22) +#define EPITCR_OM_SET (3 << 22) +#define EPITCR_CLKSRC_OFF (0 << 24) +#define EPITCR_CLKSRC_PERIPHERAL (1 << 24) +#define EPITCR_CLKSRC_REF_HIGH (1 << 24) +#define EPITCR_CLKSRC_REF_LOW (3 << 24) + +#define EPITSR_OCIF (1 << 0) + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clockchips.h> +#include <linux/clk.h> + +#include <mach/hardware.h> +#include <asm/mach/time.h> +#include <mach/common.h> + +static struct clock_event_device clockevent_epit; +static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; + +static void __iomem *timer_base; + +static inline void epit_irq_disable(void) +{ + u32 val; + + val = __raw_readl(timer_base + EPITCR); + val &= ~EPITCR_OCIEN; + __raw_writel(val, timer_base + EPITCR); +} + +static inline void epit_irq_enable(void) +{ + u32 val; + + val = __raw_readl(timer_base + EPITCR); + val |= EPITCR_OCIEN; + __raw_writel(val, timer_base + EPITCR); +} + +static void epit_irq_acknowledge(void) +{ + __raw_writel(EPITSR_OCIF, timer_base + EPITSR); +} + +static cycle_t epit_read(struct clocksource *cs) +{ + return 0 - __raw_readl(timer_base + EPITCNR); +} + +static struct clocksource clocksource_epit = { + .name = "epit", + .rating = 200, + .read = epit_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init epit_clocksource_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + clocksource_epit.mult = clocksource_hz2mult(c, + clocksource_epit.shift); + clocksource_register(&clocksource_epit); + + return 0; +} + +/* clock event */ + +static int epit_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(timer_base + EPITCNR); + + __raw_writel(tcmp - evt, timer_base + EPITCMPR); + + return 0; +} + +static void epit_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + /* + * The timer interrupt generation is disabled at least + * for enough time to call epit_set_next_event() + */ + local_irq_save(flags); + + /* Disable interrupt in GPT module */ + epit_irq_disable(); + + if (mode != clockevent_mode) { + /* Set event time into far-far future */ + + /* Clear pending interrupt */ + epit_irq_acknowledge(); + } + + /* Remember timer mode */ + clockevent_mode = mode; + local_irq_restore(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + printk(KERN_ERR "epit_set_mode: Periodic mode is not " + "supported for i.MX EPIT\n"); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* + * Do not put overhead of interrupt enable/disable into + * epit_set_next_event(), the core has about 4 minutes + * to call epit_set_next_event() or shutdown clock after + * mode switching + */ + local_irq_save(flags); + epit_irq_enable(); + local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t epit_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_epit; + + epit_irq_acknowledge(); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction epit_timer_irq = { + .name = "i.MX EPIT Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = epit_timer_interrupt, +}; + +static struct clock_event_device clockevent_epit = { + .name = "epit", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = epit_set_mode, + .set_next_event = epit_set_next_event, + .rating = 200, +}; + +static int __init epit_clockevent_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + clockevent_epit.mult = div_sc(c, NSEC_PER_SEC, + clockevent_epit.shift); + clockevent_epit.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &clockevent_epit); + clockevent_epit.min_delta_ns = + clockevent_delta2ns(0x800, &clockevent_epit); + + clockevent_epit.cpumask = cpumask_of(0); + + clockevents_register_device(&clockevent_epit); + + return 0; +} + +void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +{ + clk_enable(timer_clk); + + timer_base = base; + + /* + * Initialise to a known state (all timers off, and timing reset) + */ + __raw_writel(0x0, timer_base + EPITCR); + + __raw_writel(0xffffffff, timer_base + EPITLR); + __raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN, + timer_base + EPITCR); + + /* init and register the timer to the framework */ + epit_clocksource_init(timer_clk); + epit_clockevent_init(timer_clk); + + /* Make irqs happen */ + setup_irq(irq, &epit_timer_irq); +} diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 57ec4a896a5d..9d38da077edb 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -235,7 +235,7 @@ static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) unsigned long flags; spin_lock_irqsave(&port->lock, flags); - l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset); + l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset); __raw_writel(l, reg); spin_unlock_irqrestore(&port->lock, flags); } diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h new file mode 100644 index 000000000000..94b60dd47137 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h @@ -0,0 +1,33 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ +#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ + +#include <mach/hardware.h> + +/* + * These symbols are used by drivers/net/cs89x0.c. + * This is ugly as hell, but we have to provide them until + * someone fixed the driver. + */ + +/* Base address of PBC controller */ +#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT +/* Offsets for the PBC Controller register */ + +/* Ethernet Controller IO base address */ +#define PBC_CS8900A_IOBASE 0x020000 + +#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) + +#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) + +#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 2941472582d2..7a1e1f89ff09 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -32,6 +32,7 @@ extern void mx31_init_irq(void); extern void mx35_init_irq(void); extern void mx51_init_irq(void); extern void mxc91231_init_irq(void); +extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 25606409aabc..d56213fb901b 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -62,11 +62,9 @@ #define UART_PADDR MXC91231_UART2_BASE_ADDR #define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) #endif - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =UART_PADDR @ physical - ldrne \rx, =UART_VADDR @ virtual + .macro addruart, rp, rv + ldr \rp, =UART_PADDR @ physical + ldr \rv, =UART_VADDR @ virtual .endm .macro senduart,rd,rx diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index c5f68c587309..86d7575a564d 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -14,47 +14,105 @@ struct platform_device *imx_add_platform_device(const char *name, int id, const struct resource *res, unsigned int num_resources, const void *data, size_t size_data); -#if defined (CONFIG_CAN_FLEXCAN) || defined (CONFIG_CAN_FLEXCAN_MODULE) +#include <linux/fec.h> +struct imx_fec_data { + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_fec( + const struct imx_fec_data *data, + const struct fec_platform_data *pdata); + #include <linux/can/platform/flexcan.h> struct platform_device *__init imx_add_flexcan(int id, resource_size_t iobase, resource_size_t iosize, resource_size_t irq, const struct flexcan_platform_data *pdata); -#else -/* the ifdef can be removed once the flexcan driver has been merged */ -struct flexcan_platform_data; -static inline struct platform_device *__init imx_add_flexcan(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irq, - const struct flexcan_platform_data *pdata) -{ - return NULL; -} -#endif #include <mach/i2c.h> -struct platform_device *__init imx_add_imx_i2c(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +struct imx_imx_i2c_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_i2c( + const struct imx_imx_i2c_data *data, const struct imxi2c_platform_data *pdata); +#include <mach/ssi.h> +struct imx_imx_ssi_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; + resource_size_t dmatx0; + resource_size_t dmarx0; + resource_size_t dmatx1; + resource_size_t dmarx1; +}; +struct platform_device *__init imx_add_imx_ssi( + const struct imx_imx_ssi_data *data, + const struct imx_ssi_platform_data *pdata); + #include <mach/imx-uart.h> -struct platform_device *__init imx_add_imx_uart_3irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irqrx, resource_size_t irqtx, - resource_size_t irqrts, +struct imx_imx_uart_3irq_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irqrx; + resource_size_t irqtx; + resource_size_t irqrts; +}; +struct platform_device *__init imx_add_imx_uart_3irq( + const struct imx_imx_uart_3irq_data *data, const struct imxuart_platform_data *pdata); -struct platform_device *__init imx_add_imx_uart_1irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irq, + +struct imx_imx_uart_1irq_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_uart_1irq( + const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata); #include <mach/mxc_nand.h> -struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata); -struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata); +struct imx_mxc_nand_data { + /* + * id is traditionally 0, but -1 is more appropriate. We use -1 for new + * machines but don't change existing devices as the nand device usually + * appears in the kernel command line to pass its partitioning. + */ + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t axibase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_mxc_nand( + const struct imx_mxc_nand_data *data, + const struct mxc_nand_platform_data *pdata); #include <mach/spi.h> -struct platform_device *__init imx_add_spi_imx(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +struct imx_spi_imx_data { + const char *devid; + int id; + resource_size_t iobase; + resource_size_t iosize; + int irq; +}; +struct platform_device *__init imx_add_spi_imx( + const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata); + +#include <mach/esdhc.h> +struct imx_esdhc_imx_data { + int id; + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_esdhc( + const struct imx_esdhc_imx_data *data, + const struct esdhc_platform_data *pdata); diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h new file mode 100644 index 000000000000..a48a9aaa56b1 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/esdhc.h @@ -0,0 +1,16 @@ +/* + * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#ifndef __ASM_ARCH_IMX_ESDHC_H +#define __ASM_ARCH_IMX_ESDHC_H + +struct esdhc_platform_data { + unsigned int wp_gpio; /* write protect pin */ +}; +#endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h index 656acb45d434..a21d3313f994 100644 --- a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h +++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h @@ -28,19 +28,22 @@ * its own devices, it calls baseboard's init function. * TODO: Add your own baseboard init function and call it from * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init() - * eukrea_cpuimx35_init() or eukrea_cpuimx51_init(). + * eukrea_cpuimx35_init() eukrea_cpuimx51_init() + * or eukrea_cpuimx51sd_init(). * * This example here is for the development board. Refer * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25 * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27 * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35 * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51 + * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd */ extern void eukrea_mbimxsd25_baseboard_init(void); extern void eukrea_mbimx27_baseboard_init(void); extern void eukrea_mbimxsd35_baseboard_init(void); extern void eukrea_mbimx51_baseboard_init(void); +extern void eukrea_mbimxsd51_baseboard_init(void); #endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index 21bfa46785bb..e46b1c2836d4 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -45,6 +45,18 @@ typedef enum iomux_config { PAD_CTL_PKE | PAD_CTL_HYS) #define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \ PAD_CTL_SRE_FAST) +#define MX51_ECSPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) +#define MX51_SDHCI_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_SRE_FAST | \ + PAD_CTL_DVS) + +#define MX51_PAD_CTRL_1 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_HYS) +#define MX51_PAD_CTRL_2 (PAD_CTL_HYS | PAD_CTL_PKE) +#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) +#define MX51_PAD_CTRL_4 (PAD_CTL_DVS | PAD_CTL_HYS | PAD_CTL_PKE) +#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH) /* * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> @@ -106,14 +118,20 @@ typedef enum iomux_config { #define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_EB2__GPIO_2_22 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0x0d4, 3, 0x0, 0, MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP) #define MX51_PAD_EIM_EB3__GPIO_2_23 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB3__FEC_RDAT1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_OE__GPIO_2_24 IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CS0__GPIO_2_25 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CS1__GPIO_2_26 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CS2__GPIO_2_27 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS2__FEC_RDAT2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_CS3__GPIO_2_28 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS3__FEC_RDAT3 IOMUX_PAD(0x480, 0x0ec, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_CS4__GPIO_2_29 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_CS5__GPIO_2_30 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_DTACK__GPIO_2_31 IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_LBA__GPIO_3_1 IOMUX_PAD(0x494, 0x0FC, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CRE__GPIO_3_2 IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) @@ -126,18 +144,32 @@ typedef enum iomux_config { #define MX51_PAD_NANDF_RB0__GPIO_3_8 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__GPIO_3_9 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__GPIO_3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_NANDF_RB3__GPIO_3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__FEC_RXCLK IOMUX_PAD(0x504, 0x128, 1, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_NANDF_RB6__FEC_RDAT0 IOMUX_PAD(0x5DC, 0x134, 1, 0x0, 0, MX51_PAD_CTRL_4) +#define MX51_PAD_NANDF_RB7__FEC_TDAT0 IOMUX_PAD(0x5E0, 0x138, 1, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_GPIO_NAND__GPIO_3_12 IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS0__GPIO_3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS1__GPIO_3_17 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS2__GPIO_3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS3__GPIO_3_19 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13C, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS4__GPIO_3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS4__FEC_TDAT1 IOMUX_PAD(0x528, 0x140, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS5__GPIO_3_21 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS5__FEC_TDAT2 IOMUX_PAD(0x52C, 0x144, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS6__GPIO_3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS6__FEC_TDAT3 IOMUX_PAD(0x530, 0x148, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS7__GPIO_3_23 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14C, 1, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_RDY_INT__GPIO_3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0, 0, MX51_PAD_CTRL_4) #define MX51_PAD_NANDF_D15__GPIO_3_25 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53C, 0x154, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_NANDF_D14__GPIO_3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_D13__GPIO_3_27 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_D12__GPIO_3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) @@ -185,15 +217,25 @@ typedef enum iomux_config { #define MX51_PAD_I2C1_CLK__HSI2C_CLK IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_I2C1_DAT__GPIO_4_17 IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_I2C1_DAT__HSI2C_DAT IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_TXD__GPIO_4_18 IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_RXD__GPIO_4_19 IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_CK__GPIO_4_20 IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_FS__GPIO_4_21 IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_MOSI__GPIO_4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_MISO__GPIO_4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_SS0__GPIO_4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_SS1__GPIO_4_25 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_RDY__GPIO_4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_SCLK__GPIO_4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) #define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, 0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) @@ -236,14 +278,14 @@ typedef enum iomux_config { #define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) #define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) #define MX51_PAD_DI1_PIN11__GPIO_3_0 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x978, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x97c, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x980, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x984, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x988, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x98c, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x990, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x994, 1, NO_PAD_CTRL) #define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) @@ -294,32 +336,50 @@ typedef enum iomux_config { #define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79C, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL) +#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS) +#define MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7A0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7A4, 0x39C, 1, 0x8d8, 2, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7A8, 0x3A0, 1, 0x8d4, 2, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7AC, 0x3A4, 1, 0x8e4, 2, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7B0, 0x3A8, 1, 0x8e8, 2, NO_PAD_CTRL) +#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, IOMUX_CONFIG_SION, 0x0, 1, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS) +#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO_1_2__I2C2_SCL IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \ 0x9b8, 3, MX51_I2C_PAD_CTRL) -#define MX51_PAD_GPIO_1_3__GPIO_1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__GPIO_1_3 IOMUX_PAD(0x7D8, 0x3D0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO_1_3__I2C2_SDA IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \ 0x9bc, 3, MX51_I2C_PAD_CTRL) #define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_9__GPIO_1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810, 0x3E4, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_9__GPIO_1_9 IOMUX_PAD(0x818, 0x3EC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) #endif /* __MACH_IOMUX_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iram.h b/arch/arm/plat-mxc/include/mach/iram.h new file mode 100644 index 000000000000..022690c33702 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iram.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include <linux/errno.h> + +#ifdef CONFIG_IRAM_ALLOC + +int __init iram_init(unsigned long base, unsigned long size); +void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr); +void iram_free(unsigned long dma_addr, unsigned int size); + +#else + +static inline int __init iram_init(unsigned long base, unsigned long size) +{ + return -ENOMEM; +} + +static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) +{ + return NULL; +} + +static inline void iram_free(unsigned long base, unsigned long size) {} + +#endif diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index ed98b9c9f389..8bc59720b6e4 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -120,7 +120,7 @@ #define MX21_INT_GPT1 26 #define MX21_INT_WDOG 27 #define MX21_INT_PCMCIA 28 -#define MX21_INT_NANDFC 29 +#define MX21_INT_NFC 29 #define MX21_INT_BMI 30 #define MX21_INT_CSI 31 #define MX21_INT_DMACH0 32 diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 4a6f800990f8..cf46a45b0d4e 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -50,8 +50,11 @@ #define MX25_SSI1_BASE_ADDR 0x50034000 #define MX25_NFC_BASE_ADDR 0xbb000000 #define MX25_DRYICE_BASE_ADDR 0x53ffc000 +#define MX25_ESDHC1_BASE_ADDR 0x53fb4000 +#define MX25_ESDHC2_BASE_ADDR 0x53fb8000 #define MX25_LCDC_BASE_ADDR 0x53fbc000 #define MX25_KPP_BASE_ADDR 0x43fa8000 +#define MX25_SDMA_BASE_ADDR 0x53fd4000 #define MX25_OTG_BASE_ADDR 0x53ff4000 #define MX25_CSI_BASE_ADDR 0x53ff8000 @@ -59,6 +62,8 @@ #define MX25_INT_I2C1 3 #define MX25_INT_I2C2 4 #define MX25_INT_UART4 5 +#define MX25_INT_ESDHC2 8 +#define MX25_INT_ESDHC1 9 #define MX25_INT_I2C3 10 #define MX25_INT_SSI2 11 #define MX25_INT_SSI1 12 @@ -69,7 +74,8 @@ #define MX25_INT_KPP 24 #define MX25_INT_DRYICE 25 #define MX25_INT_UART2 32 -#define MX25_INT_NANDFC 33 +#define MX25_INT_NFC 33 +#define MX25_INT_SDMA 34 #define MX25_INT_LCDC 39 #define MX25_INT_UART5 40 #define MX25_INT_CAN1 43 @@ -77,4 +83,13 @@ #define MX25_INT_UART1 45 #define MX25_INT_FEC 57 +#define MX25_DMA_REQ_SSI2_RX1 22 +#define MX25_DMA_REQ_SSI2_TX1 23 +#define MX25_DMA_REQ_SSI2_RX0 24 +#define MX25_DMA_REQ_SSI2_TX0 25 +#define MX25_DMA_REQ_SSI1_RX1 26 +#define MX25_DMA_REQ_SSI1_TX1 27 +#define MX25_DMA_REQ_SSI1_RX0 28 +#define MX25_DMA_REQ_SSI1_TX0 29 + #endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index a8ab2e02a8ca..2237ba2e5351 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -167,7 +167,7 @@ static inline void mx27_setup_weimcs(size_t cs, #define MX27_INT_GPT1 26 #define MX27_INT_WDOG 27 #define MX27_INT_PCMCIA 28 -#define MX27_INT_NANDFC 29 +#define MX27_INT_NFC 29 #define MX27_INT_ATA 30 #define MX27_INT_CSI 31 #define MX27_INT_DMACH0 32 diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index afee3ab9d62e..03e2afabc9fc 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -168,7 +168,7 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_POWER_FAIL 30 #define MX31_INT_CCM_DVFS 31 #define MX31_INT_UART2 32 -#define MX31_INT_NANDFC 33 +#define MX31_INT_NFC 33 #define MX31_INT_SDMA 34 #define MX31_INT_USB1 35 #define MX31_INT_USB2 36 @@ -197,6 +197,15 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_EXT_WDOG 62 #define MX31_INT_EXT_TV 63 +#define MX31_DMA_REQ_SSI2_RX1 22 +#define MX31_DMA_REQ_SSI2_TX1 23 +#define MX31_DMA_REQ_SSI2_RX0 24 +#define MX31_DMA_REQ_SSI2_TX0 25 +#define MX31_DMA_REQ_SSI1_RX1 26 +#define MX31_DMA_REQ_SSI1_TX1 27 +#define MX31_DMA_REQ_SSI1_RX0 28 +#define MX31_DMA_REQ_SSI1_TX0 29 + #define MX31_PROD_SIGNATURE 0x1 /* For MX31 */ /* silicon revisions specific to i.MX31 */ diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index af3038c12e39..ff905cb32458 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -1,5 +1,6 @@ #ifndef __MACH_MX35_H__ #define __MACH_MX35_H__ + /* * IRAM */ @@ -52,6 +53,9 @@ #define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000) #define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000) #define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000) +#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000) +#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000) +#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000) #define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000) #define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000) #define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000) @@ -63,6 +67,8 @@ #define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000) #define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000) #define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000) +#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000) + #define MX35_OTG_BASE_ADDR 0x53ff4000 #define MX35_ROMP_BASE_ADDR 0x60000000 @@ -122,9 +128,9 @@ #define MX35_INT_I2C3 3 #define MX35_INT_I2C2 4 #define MX35_INT_RTIC 6 -#define MX35_INT_MMC_SDHC1 7 -#define MX35_INT_MMC_SDHC2 8 -#define MX35_INT_MMC_SDHC3 9 +#define MX35_INT_ESDHC1 7 +#define MX35_INT_ESDHC2 8 +#define MX35_INT_ESDHC3 9 #define MX35_INT_I2C1 10 #define MX35_INT_SSI1 11 #define MX35_INT_SSI2 12 @@ -145,7 +151,7 @@ #define MX35_INT_GPT 29 #define MX35_INT_POWER_FAIL 30 #define MX35_INT_UART2 32 -#define MX35_INT_NANDFC 33 +#define MX35_INT_NFC 33 #define MX35_INT_SDMA 34 #define MX35_INT_USBHS 35 #define MX35_INT_USBOTG 37 @@ -173,22 +179,18 @@ #define MX35_INT_EXT_WDOG 62 #define MX35_INT_EXT_TV 63 +#define MX35_DMA_REQ_SSI2_RX1 22 +#define MX35_DMA_REQ_SSI2_TX1 23 +#define MX35_DMA_REQ_SSI2_RX0 24 +#define MX35_DMA_REQ_SSI2_TX0 25 +#define MX35_DMA_REQ_SSI1_RX1 26 +#define MX35_DMA_REQ_SSI1_TX1 27 +#define MX35_DMA_REQ_SSI1_RX0 28 +#define MX35_DMA_REQ_SSI1_TX0 29 + #define MX35_PROD_SIGNATURE 0x1 /* For MX31 */ -/* silicon revisions specific to i.MX31 */ -#define MX35_CHIP_REV_1_0 0x10 -#define MX35_CHIP_REV_1_1 0x11 -#define MX35_CHIP_REV_1_2 0x12 -#define MX35_CHIP_REV_1_3 0x13 -#define MX35_CHIP_REV_2_0 0x20 -#define MX35_CHIP_REV_2_1 0x21 -#define MX35_CHIP_REV_2_2 0x22 -#define MX35_CHIP_REV_2_3 0x23 -#define MX35_CHIP_REV_3_0 0x30 -#define MX35_CHIP_REV_3_1 0x31 -#define MX35_CHIP_REV_3_2 0x32 - -#define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0 +#define MX35_SYSTEM_REV_MIN MX3x_CHIP_REV_1_0 #define MX35_SYSTEM_REV_NUM 3 #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index 7a356de385f5..d1bd26d7b8a6 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -240,7 +240,7 @@ #define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */ -/* silicon revisions specific to i.MX31 */ +/* silicon revisions specific to i.MX31 and i.MX35 */ #define MX3x_CHIP_REV_1_0 0x10 #define MX3x_CHIP_REV_1_1 0x11 #define MX3x_CHIP_REV_1_2 0x12 @@ -267,6 +267,14 @@ static inline int mx31_revision(void) { return mx31_cpu_rev; } + +extern unsigned int mx35_cpu_rev; +extern void mx35_read_cpu_rev(void); + +static inline int mx35_revision(void) +{ + return mx35_cpu_rev; +} #endif #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS @@ -389,19 +397,6 @@ static inline int mx31_revision(void) #define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG #define MXC_INT_EXT_TV MX3x_INT_EXT_TV #define PROD_SIGNATURE MX3x_PROD_SIGNATURE -#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0 -#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1 -#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2 -#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3 -#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0 -#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1 -#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2 -#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3 -#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0 -#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1 -#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2 -#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN -#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM #endif #endif /* ifndef __MACH_MX3x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 5aad344d5651..2af7a1056fc1 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -1,5 +1,5 @@ -#ifndef __ASM_ARCH_MXC_MX51_H__ -#define __ASM_ARCH_MXC_MX51_H__ +#ifndef __MACH_MX51_H__ +#define __MACH_MX51_H__ /* * MX51 memory map: @@ -7,24 +7,23 @@ * * Virt Phys Size What * --------------------------------------------------------------------------- - * FA3E0000 1FFE0000 128K IRAM (SCCv2 RAM) + * fa3e0000 1ffe0000 128K IRAM (SCCv2 RAM) * 30000000 256M GPU * 40000000 512M IPU - * FA200000 60000000 1M DEBUG - * FB100000 70000000 1M SPBA 0 - * FB000000 73F00000 1M AIPS 1 - * FB200000 83F00000 1M AIPS 2 - * 8FFFC000 16K TZIC (interrupt controller) + * fa200000 60000000 1M DEBUG + * fb100000 70000000 1M SPBA 0 + * fb000000 73f00000 1M AIPS 1 + * fb200000 83f00000 1M AIPS 2 + * 8fffc000 16K TZIC (interrupt controller) * 90000000 256M CSD0 SDRAM/DDR - * A0000000 256M CSD1 SDRAM/DDR - * B0000000 128M CS0 Flash - * B8000000 128M CS1 Flash - * C0000000 128M CS2 Flash - * C8000000 64M CS3 Flash - * CC000000 32M CS4 SRAM - * CE000000 32M CS5 SRAM - * CFFF0000 64K NFC (NAND Flash AXI) - * + * a0000000 256M CSD1 SDRAM/DDR + * b0000000 128M CS0 Flash + * b8000000 128M CS1 Flash + * c0000000 128M CS2 Flash + * c8000000 64M CS3 Flash + * cc000000 32M CS4 SRAM + * ce000000 32M CS5 SRAM + * cfff0000 64K NFC (NAND Flash AXI) */ /* @@ -36,65 +35,151 @@ /* * IRAM */ -#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ -#define MX51_IRAM_BASE_ADDR_VIRT 0xFA3E0000 +#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */ +#define MX51_IRAM_BASE_ADDR_VIRT 0xfa3e0000 #define MX51_IRAM_PARTITIONS 16 -#define MX51_IRAM_PARTITIONS_TO1 12 #define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */ +#define MX51_GPU_BASE_ADDR 0x20000000 +#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 +#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 + +#define MX51_DEBUG_BASE_ADDR 0x60000000 +#define MX51_DEBUG_BASE_ADDR_VIRT 0xfa200000 +#define MX51_DEBUG_SIZE SZ_1M + +#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000) +#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x02000) +#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x03000) +#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x04000) +#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x05000) +#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x06000) +#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x07000) +#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x08000) + /* - * NFC + * SPBA global module enabled #0 */ -#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */ -#define MX51_NFC_AXI_SIZE SZ_64K +#define MX51_SPBA0_BASE_ADDR 0x70000000 +#define MX51_SPBA0_BASE_ADDR_VIRT 0xfb100000 +#define MX51_SPBA0_SIZE SZ_1M + +#define MX51_ESDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000) +#define MX51_ESDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x08000) +#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0c000) +#define MX51_ECSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000) +#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x14000) +#define MX51_ESDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x20000) +#define MX51_ESDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x24000) +#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x28000) +#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x30000) +#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x34000) +#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x38000) +#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x3c000) /* - * Graphics Memory of GPU + * AIPS 1 */ -#define MX51_GPU_BASE_ADDR 0x20000000 -#define MX51_GPU2D_BASE_ADDR 0xD0000000 +#define MX51_AIPS1_BASE_ADDR 0x73f00000 +#define MX51_AIPS1_BASE_ADDR_VIRT 0xfb000000 +#define MX51_AIPS1_SIZE SZ_1M + +#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000) +#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000) +#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000) +#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000) +#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000) +#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000) +#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000) +#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000) +#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000) +#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000) +#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa8000) +#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xac000) +#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb0000) +#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb4000) +#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb8000) +#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xbc000) +#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xc0000) +#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd0000) +#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd4000) +#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd8000) -#define MX51_TZIC_BASE_ADDR_TO1 0x8FFFC000 -#define MX51_TZIC_BASE_ADDR 0xE0000000 +/* + * AIPS 2 + */ +#define MX51_AIPS2_BASE_ADDR 0x83f00000 +#define MX51_AIPS2_BASE_ADDR_VIRT 0xfb200000 +#define MX51_AIPS2_SIZE SZ_1M -#define MX51_DEBUG_BASE_ADDR 0x60000000 -#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000 -#define MX51_DEBUG_SIZE SZ_1M -#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00001000) -#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00002000) -#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00003000) -#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00004000) -#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00005000) -#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00006000) -#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00007000) -#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00008000) +#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000) +#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x84000) +#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x88000) +#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x94000) +#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x98000) +#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x9c000) +#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa0000) +#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa4000) +#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa8000) +#define MX51_ECSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000) +#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb0000) +#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb4000) +#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb8000) +#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xbc000) +#define MX51_CSPI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000) +#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc4000) +#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc8000) +#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xcc000) +#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd0000) +#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd8000) +#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd9000) +#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xda000) +#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdb000) +#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdbf00) +#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000) +#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000) +#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000) +#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000) +#define MX51_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000) +#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000) +#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000) +#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf8000) + +#define MX51_CSD0_BASE_ADDR 0x90000000 +#define MX51_CSD1_BASE_ADDR 0xa0000000 +#define MX51_CS0_BASE_ADDR 0xb0000000 +#define MX51_CS1_BASE_ADDR 0xb8000000 +#define MX51_CS2_BASE_ADDR 0xc0000000 +#define MX51_CS3_BASE_ADDR 0xc8000000 +#define MX51_CS4_BASE_ADDR 0xcc000000 +#define MX51_CS5_BASE_ADDR 0xce000000 /* - * SPBA global module enabled #0 + * NFC */ -#define MX51_SPBA0_BASE_ADDR 0x70000000 -#define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000 -#define MX51_SPBA0_SIZE SZ_1M +#define MX51_NFC_AXI_BASE_ADDR 0xcfff0000 /* NAND flash AXI */ +#define MX51_NFC_AXI_SIZE SZ_64K + +#define MX51_GPU2D_BASE_ADDR 0xd0000000 +#define MX51_TZIC_BASE_ADDR 0xe0000000 -#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000) -#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000) -#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000) -#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000) -#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000) -#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000) -#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000) -#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000) -#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000) -#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000) -#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000) -#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000) +#define MX51_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX51_IRAM) ?: \ + IMX_IO_ADDRESS(x, MX51_DEBUG) ?: \ + IMX_IO_ADDRESS(x, MX51_SPBA0) ?: \ + IMX_IO_ADDRESS(x, MX51_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX51_AIPS2)) + +/* This is currently used in <mach/debug-macro.S>, but should go away */ +#define MX51_AIPS1_IO_ADDRESS(x) \ + (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) /* * defines for SPBA modules */ #define MX51_SPBA_SDHC1 0x04 #define MX51_SPBA_SDHC2 0x08 -#define MX51_SPBA_UART3 0x0C +#define MX51_SPBA_UART3 0x0c #define MX51_SPBA_CSPI1 0x10 #define MX51_SPBA_SSI2 0x14 #define MX51_SPBA_SDHC3 0x20 @@ -103,35 +188,7 @@ #define MX51_SPBA_ATA 0x30 #define MX51_SPBA_SLIM 0x34 #define MX51_SPBA_HSI2C 0x38 -#define MX51_SPBA_CTRL 0x3C - -/* - * AIPS 1 - */ -#define MX51_AIPS1_BASE_ADDR 0x73F00000 -#define MX51_AIPS1_BASE_ADDR_VIRT 0xFB000000 -#define MX51_AIPS1_SIZE SZ_1M - -#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00080000) -#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00084000) -#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00088000) -#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0008C000) -#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00090000) -#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00094000) -#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00098000) -#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0009C000) -#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A0000) -#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A4000) -#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A8000) -#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000AC000) -#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B0000) -#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B4000) -#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B8000) -#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000BC000) -#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000C0000) -#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D0000) -#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D4000) -#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D8000) +#define MX51_SPBA_CTRL 0x3c /* * Defines for modules using static and dynamic DMA channels @@ -164,282 +221,186 @@ #define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL #define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL -/* - * AIPS 2 - */ -#define MX51_AIPS2_BASE_ADDR 0x83F00000 -#define MX51_AIPS2_BASE_ADDR_VIRT 0xFB200000 -#define MX51_AIPS2_SIZE SZ_1M - -#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00080000) -#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00084000) -#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00088000) -#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00094000) -#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00098000) -#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x0009C000) -#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A0000) -#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A4000) -#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A8000) -#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000AC000) -#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B0000) -#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B4000) -#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B8000) -#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000BC000) -#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C0000) -#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C4000) -#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C8000) -#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000CC000) -#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D0000) -#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D8000) -#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D9000) -#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DA000) -#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DB000) -#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DBF00) -#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000) -#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E0000) -#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E4000) -#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E8000) -#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000EC000) -#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F0000) -#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F4000) -#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000) - -/* - * Memory regions and CS - */ -#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 -#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 -#define MX51_CSD0_BASE_ADDR 0x90000000 -#define MX51_CSD1_BASE_ADDR 0xA0000000 -#define MX51_CS0_BASE_ADDR 0xB0000000 -#define MX51_CS1_BASE_ADDR 0xB8000000 -#define MX51_CS2_BASE_ADDR 0xC0000000 -#define MX51_CS3_BASE_ADDR 0xC8000000 -#define MX51_CS4_BASE_ADDR 0xCC000000 -#define MX51_CS5_BASE_ADDR 0xCE000000 - -/* Does given address belongs to the specified memory region? */ -#define ADDRESS_IN_REGION(addr, start, size) \ - (((addr) >= (start)) && ((addr) < (start)+(size))) - -/* Does given address belongs to the specified named `module'? */ -#define MX51_IS_MODULE(addr, module) \ - ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \ - MX51_ ## module ## _SIZE) -/* - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ - -#define MX51_IO_ADDRESS(x) \ - (void __iomem *) \ - (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ - 0xDEADBEEF) - -/* - * define the address mapping macros: in physical address order - */ -#define MX51_IRAM_IO_ADDRESS(x) \ - (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT) - -#define MX51_DEBUG_IO_ADDRESS(x) \ - (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT) - -#define MX51_SPBA0_IO_ADDRESS(x) \ - (((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT) - -#define MX51_AIPS1_IO_ADDRESS(x) \ - (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) - -#define MX51_AIPS2_IO_ADDRESS(x) \ - (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT) - #define MX51_IS_MEM_DEVICE_NONSHARED(x) 0 /* * DMA request assignments */ -#define MX51_DMA_REQ_SSI3_TX1 47 -#define MX51_DMA_REQ_SSI3_RX1 46 -#define MX51_DMA_REQ_SPDIF 45 -#define MX51_DMA_REQ_UART3_TX 44 -#define MX51_DMA_REQ_UART3_RX 43 -#define MX51_DMA_REQ_SLIM_B_TX 42 -#define MX51_DMA_REQ_SDHC4 41 -#define MX51_DMA_REQ_SDHC3 40 -#define MX51_DMA_REQ_CSPI_TX 39 -#define MX51_DMA_REQ_CSPI_RX 38 -#define MX51_DMA_REQ_SSI3_TX2 37 -#define MX51_DMA_REQ_IPU 36 -#define MX51_DMA_REQ_SSI3_RX2 35 -#define MX51_DMA_REQ_EPIT2 34 -#define MX51_DMA_REQ_CTI2_1 33 -#define MX51_DMA_REQ_EMI_WR 32 -#define MX51_DMA_REQ_CTI2_0 31 -#define MX51_DMA_REQ_EMI_RD 30 -#define MX51_DMA_REQ_SSI1_TX1 29 -#define MX51_DMA_REQ_SSI1_RX1 28 -#define MX51_DMA_REQ_SSI1_TX2 27 -#define MX51_DMA_REQ_SSI1_RX2 26 -#define MX51_DMA_REQ_SSI2_TX1 25 -#define MX51_DMA_REQ_SSI2_RX1 24 -#define MX51_DMA_REQ_SSI2_TX2 23 -#define MX51_DMA_REQ_SSI2_RX2 22 -#define MX51_DMA_REQ_SDHC2 21 -#define MX51_DMA_REQ_SDHC1 20 -#define MX51_DMA_REQ_UART1_TX 19 -#define MX51_DMA_REQ_UART1_RX 18 -#define MX51_DMA_REQ_UART2_TX 17 -#define MX51_DMA_REQ_UART2_RX 16 -#define MX51_DMA_REQ_GPU 15 -#define MX51_DMA_REQ_EXTREQ1 14 -#define MX51_DMA_REQ_FIRI_TX 13 -#define MX51_DMA_REQ_FIRI_RX 12 -#define MX51_DMA_REQ_HS_I2C_RX 11 -#define MX51_DMA_REQ_HS_I2C_TX 10 -#define MX51_DMA_REQ_CSPI2_TX 9 -#define MX51_DMA_REQ_CSPI2_RX 8 -#define MX51_DMA_REQ_CSPI1_TX 7 -#define MX51_DMA_REQ_CSPI1_RX 6 -#define MX51_DMA_REQ_SLIM_B 5 -#define MX51_DMA_REQ_ATA_TX_END 4 -#define MX51_DMA_REQ_ATA_TX 3 -#define MX51_DMA_REQ_ATA_RX 2 -#define MX51_DMA_REQ_GPC 1 -#define MX51_DMA_REQ_VPU 0 +#define MX51_DMA_REQ_VPU 0 +#define MX51_DMA_REQ_GPC 1 +#define MX51_DMA_REQ_ATA_RX 2 +#define MX51_DMA_REQ_ATA_TX 3 +#define MX51_DMA_REQ_ATA_TX_END 4 +#define MX51_DMA_REQ_SLIM_B 5 +#define MX51_DMA_REQ_CSPI1_RX 6 +#define MX51_DMA_REQ_CSPI1_TX 7 +#define MX51_DMA_REQ_CSPI2_RX 8 +#define MX51_DMA_REQ_CSPI2_TX 9 +#define MX51_DMA_REQ_HS_I2C_TX 10 +#define MX51_DMA_REQ_HS_I2C_RX 11 +#define MX51_DMA_REQ_FIRI_RX 12 +#define MX51_DMA_REQ_FIRI_TX 13 +#define MX51_DMA_REQ_EXTREQ1 14 +#define MX51_DMA_REQ_GPU 15 +#define MX51_DMA_REQ_UART2_RX 16 +#define MX51_DMA_REQ_UART2_TX 17 +#define MX51_DMA_REQ_UART1_RX 18 +#define MX51_DMA_REQ_UART1_TX 19 +#define MX51_DMA_REQ_SDHC1 20 +#define MX51_DMA_REQ_SDHC2 21 +#define MX51_DMA_REQ_SSI2_RX1 22 +#define MX51_DMA_REQ_SSI2_TX1 23 +#define MX51_DMA_REQ_SSI2_RX0 24 +#define MX51_DMA_REQ_SSI2_TX0 25 +#define MX51_DMA_REQ_SSI1_RX1 26 +#define MX51_DMA_REQ_SSI1_TX1 27 +#define MX51_DMA_REQ_SSI1_RX0 28 +#define MX51_DMA_REQ_SSI1_TX0 29 +#define MX51_DMA_REQ_EMI_RD 30 +#define MX51_DMA_REQ_CTI2_0 31 +#define MX51_DMA_REQ_EMI_WR 32 +#define MX51_DMA_REQ_CTI2_1 33 +#define MX51_DMA_REQ_EPIT2 34 +#define MX51_DMA_REQ_SSI3_RX2 35 +#define MX51_DMA_REQ_IPU 36 +#define MX51_DMA_REQ_SSI3_TX2 37 +#define MX51_DMA_REQ_CSPI_RX 38 +#define MX51_DMA_REQ_CSPI_TX 39 +#define MX51_DMA_REQ_SDHC3 40 +#define MX51_DMA_REQ_SDHC4 41 +#define MX51_DMA_REQ_SLIM_B_TX 42 +#define MX51_DMA_REQ_UART3_RX 43 +#define MX51_DMA_REQ_UART3_TX 44 +#define MX51_DMA_REQ_SPDIF 45 +#define MX51_DMA_REQ_SSI3_RX1 46 +#define MX51_DMA_REQ_SSI3_TX1 47 /* * Interrupt numbers */ -#define MX51_MXC_INT_BASE 0 -#define MX51_MXC_INT_RESV0 0 -#define MX51_MXC_INT_MMC_SDHC1 1 -#define MX51_MXC_INT_MMC_SDHC2 2 -#define MX51_MXC_INT_MMC_SDHC3 3 -#define MX51_MXC_INT_MMC_SDHC4 4 -#define MX51_MXC_INT_RESV5 5 -#define MX51_MXC_INT_SDMA 6 -#define MX51_MXC_INT_IOMUX 7 -#define MX51_MXC_INT_NFC 8 -#define MX51_MXC_INT_VPU 9 -#define MX51_MXC_INT_IPU_ERR 10 -#define MX51_MXC_INT_IPU_SYN 11 -#define MX51_MXC_INT_GPU 12 -#define MX51_MXC_INT_RESV13 13 -#define MX51_MXC_INT_USB_H1 14 -#define MX51_MXC_INT_EMI 15 -#define MX51_MXC_INT_USB_H2 16 -#define MX51_MXC_INT_USB_H3 17 -#define MX51_MXC_INT_USB_OTG 18 -#define MX51_MXC_INT_SAHARA_H0 19 -#define MX51_MXC_INT_SAHARA_H1 20 -#define MX51_MXC_INT_SCC_SMN 21 -#define MX51_MXC_INT_SCC_STZ 22 -#define MX51_MXC_INT_SCC_SCM 23 -#define MX51_MXC_INT_SRTC_NTZ 24 -#define MX51_MXC_INT_SRTC_TZ 25 -#define MX51_MXC_INT_RTIC 26 -#define MX51_MXC_INT_CSU 27 -#define MX51_MXC_INT_SLIM_B 28 -#define MX51_MXC_INT_SSI1 29 -#define MX51_MXC_INT_SSI2 30 -#define MX51_MXC_INT_UART1 31 -#define MX51_MXC_INT_UART2 32 -#define MX51_MXC_INT_UART3 33 -#define MX51_MXC_INT_RESV34 34 -#define MX51_MXC_INT_RESV35 35 -#define MX51_MXC_INT_CSPI1 36 -#define MX51_MXC_INT_CSPI2 37 -#define MX51_MXC_INT_CSPI 38 -#define MX51_MXC_INT_GPT 39 -#define MX51_MXC_INT_EPIT1 40 -#define MX51_MXC_INT_EPIT2 41 -#define MX51_MXC_INT_GPIO1_INT7 42 -#define MX51_MXC_INT_GPIO1_INT6 43 -#define MX51_MXC_INT_GPIO1_INT5 44 -#define MX51_MXC_INT_GPIO1_INT4 45 -#define MX51_MXC_INT_GPIO1_INT3 46 -#define MX51_MXC_INT_GPIO1_INT2 47 -#define MX51_MXC_INT_GPIO1_INT1 48 -#define MX51_MXC_INT_GPIO1_INT0 49 -#define MX51_MXC_INT_GPIO1_LOW 50 -#define MX51_MXC_INT_GPIO1_HIGH 51 -#define MX51_MXC_INT_GPIO2_LOW 52 -#define MX51_MXC_INT_GPIO2_HIGH 53 -#define MX51_MXC_INT_GPIO3_LOW 54 -#define MX51_MXC_INT_GPIO3_HIGH 55 -#define MX51_MXC_INT_GPIO4_LOW 56 -#define MX51_MXC_INT_GPIO4_HIGH 57 -#define MX51_MXC_INT_WDOG1 58 -#define MX51_MXC_INT_WDOG2 59 -#define MX51_MXC_INT_KPP 60 -#define MX51_MXC_INT_PWM1 61 -#define MX51_MXC_INT_I2C1 62 -#define MX51_MXC_INT_I2C2 63 -#define MX51_MXC_INT_HS_I2C 64 -#define MX51_MXC_INT_RESV65 65 -#define MX51_MXC_INT_RESV66 66 -#define MX51_MXC_INT_SIM_IPB 67 -#define MX51_MXC_INT_SIM_DAT 68 -#define MX51_MXC_INT_IIM 69 -#define MX51_MXC_INT_ATA 70 -#define MX51_MXC_INT_CCM1 71 -#define MX51_MXC_INT_CCM2 72 -#define MX51_MXC_INT_GPC1 73 -#define MX51_MXC_INT_GPC2 74 -#define MX51_MXC_INT_SRC 75 -#define MX51_MXC_INT_NM 76 -#define MX51_MXC_INT_PMU 77 -#define MX51_MXC_INT_CTI_IRQ 78 -#define MX51_MXC_INT_CTI1_TG0 79 -#define MX51_MXC_INT_CTI1_TG1 80 -#define MX51_MXC_INT_MCG_ERR 81 -#define MX51_MXC_INT_MCG_TMR 82 -#define MX51_MXC_INT_MCG_FUNC 83 -#define MX51_MXC_INT_GPU2_IRQ 84 -#define MX51_MXC_INT_GPU2_BUSY 85 -#define MX51_MXC_INT_RESV86 86 -#define MX51_MXC_INT_FEC 87 -#define MX51_MXC_INT_OWIRE 88 -#define MX51_MXC_INT_CTI1_TG2 89 -#define MX51_MXC_INT_SJC 90 -#define MX51_MXC_INT_SPDIF 91 -#define MX51_MXC_INT_TVE 92 -#define MX51_MXC_INT_FIRI 93 -#define MX51_MXC_INT_PWM2 94 -#define MX51_MXC_INT_SLIM_EXP 95 -#define MX51_MXC_INT_SSI3 96 -#define MX51_MXC_INT_EMI_BOOT 97 -#define MX51_MXC_INT_CTI1_TG3 98 -#define MX51_MXC_INT_SMC_RX 99 -#define MX51_MXC_INT_VPU_IDLE 100 -#define MX51_MXC_INT_EMI_NFC 101 -#define MX51_MXC_INT_GPU_IDLE 102 +#define MX51_MXC_INT_BASE 0 +#define MX51_MXC_INT_RESV0 0 +#define MX51_INT_ESDHC1 1 +#define MX51_INT_ESDHC2 2 +#define MX51_INT_ESDHC3 3 +#define MX51_INT_ESDHC4 4 +#define MX51_MXC_INT_RESV5 5 +#define MX51_INT_SDMA 6 +#define MX51_MXC_INT_IOMUX 7 +#define MX51_INT_NFC 8 +#define MX51_MXC_INT_VPU 9 +#define MX51_MXC_INT_IPU_ERR 10 +#define MX51_MXC_INT_IPU_SYN 11 +#define MX51_MXC_INT_GPU 12 +#define MX51_MXC_INT_RESV13 13 +#define MX51_MXC_INT_USB_H1 14 +#define MX51_MXC_INT_EMI 15 +#define MX51_MXC_INT_USB_H2 16 +#define MX51_MXC_INT_USB_H3 17 +#define MX51_MXC_INT_USB_OTG 18 +#define MX51_MXC_INT_SAHARA_H0 19 +#define MX51_MXC_INT_SAHARA_H1 20 +#define MX51_MXC_INT_SCC_SMN 21 +#define MX51_MXC_INT_SCC_STZ 22 +#define MX51_MXC_INT_SCC_SCM 23 +#define MX51_MXC_INT_SRTC_NTZ 24 +#define MX51_MXC_INT_SRTC_TZ 25 +#define MX51_MXC_INT_RTIC 26 +#define MX51_MXC_INT_CSU 27 +#define MX51_MXC_INT_SLIM_B 28 +#define MX51_INT_SSI1 29 +#define MX51_INT_SSI2 30 +#define MX51_INT_UART1 31 +#define MX51_INT_UART2 32 +#define MX51_INT_UART3 33 +#define MX51_MXC_INT_RESV34 34 +#define MX51_MXC_INT_RESV35 35 +#define MX51_INT_ECSPI1 36 +#define MX51_INT_ECSPI2 37 +#define MX51_INT_CSPI 38 +#define MX51_MXC_INT_GPT 39 +#define MX51_MXC_INT_EPIT1 40 +#define MX51_MXC_INT_EPIT2 41 +#define MX51_MXC_INT_GPIO1_INT7 42 +#define MX51_MXC_INT_GPIO1_INT6 43 +#define MX51_MXC_INT_GPIO1_INT5 44 +#define MX51_MXC_INT_GPIO1_INT4 45 +#define MX51_MXC_INT_GPIO1_INT3 46 +#define MX51_MXC_INT_GPIO1_INT2 47 +#define MX51_MXC_INT_GPIO1_INT1 48 +#define MX51_MXC_INT_GPIO1_INT0 49 +#define MX51_MXC_INT_GPIO1_LOW 50 +#define MX51_MXC_INT_GPIO1_HIGH 51 +#define MX51_MXC_INT_GPIO2_LOW 52 +#define MX51_MXC_INT_GPIO2_HIGH 53 +#define MX51_MXC_INT_GPIO3_LOW 54 +#define MX51_MXC_INT_GPIO3_HIGH 55 +#define MX51_MXC_INT_GPIO4_LOW 56 +#define MX51_MXC_INT_GPIO4_HIGH 57 +#define MX51_MXC_INT_WDOG1 58 +#define MX51_MXC_INT_WDOG2 59 +#define MX51_MXC_INT_KPP 60 +#define MX51_MXC_INT_PWM1 61 +#define MX51_INT_I2C1 62 +#define MX51_INT_I2C2 63 +#define MX51_MXC_INT_HS_I2C 64 +#define MX51_MXC_INT_RESV65 65 +#define MX51_MXC_INT_RESV66 66 +#define MX51_MXC_INT_SIM_IPB 67 +#define MX51_MXC_INT_SIM_DAT 68 +#define MX51_MXC_INT_IIM 69 +#define MX51_MXC_INT_ATA 70 +#define MX51_MXC_INT_CCM1 71 +#define MX51_MXC_INT_CCM2 72 +#define MX51_MXC_INT_GPC1 73 +#define MX51_MXC_INT_GPC2 74 +#define MX51_MXC_INT_SRC 75 +#define MX51_MXC_INT_NM 76 +#define MX51_MXC_INT_PMU 77 +#define MX51_MXC_INT_CTI_IRQ 78 +#define MX51_MXC_INT_CTI1_TG0 79 +#define MX51_MXC_INT_CTI1_TG1 80 +#define MX51_MXC_INT_MCG_ERR 81 +#define MX51_MXC_INT_MCG_TMR 82 +#define MX51_MXC_INT_MCG_FUNC 83 +#define MX51_MXC_INT_GPU2_IRQ 84 +#define MX51_MXC_INT_GPU2_BUSY 85 +#define MX51_MXC_INT_RESV86 86 +#define MX51_INT_FEC 87 +#define MX51_MXC_INT_OWIRE 88 +#define MX51_MXC_INT_CTI1_TG2 89 +#define MX51_MXC_INT_SJC 90 +#define MX51_MXC_INT_SPDIF 91 +#define MX51_MXC_INT_TVE 92 +#define MX51_MXC_INT_FIRI 93 +#define MX51_MXC_INT_PWM2 94 +#define MX51_MXC_INT_SLIM_EXP 95 +#define MX51_MXC_INT_SSI3 96 +#define MX51_MXC_INT_EMI_BOOT 97 +#define MX51_MXC_INT_CTI1_TG3 98 +#define MX51_MXC_INT_SMC_RX 99 +#define MX51_MXC_INT_VPU_IDLE 100 +#define MX51_MXC_INT_EMI_NFC 101 +#define MX51_MXC_INT_GPU_IDLE 102 /* silicon revisions specific to i.MX51 */ -#define MX51_CHIP_REV_1_0 0x10 -#define MX51_CHIP_REV_1_1 0x11 -#define MX51_CHIP_REV_1_2 0x12 -#define MX51_CHIP_REV_1_3 0x13 -#define MX51_CHIP_REV_2_0 0x20 -#define MX51_CHIP_REV_2_1 0x21 -#define MX51_CHIP_REV_2_2 0x22 -#define MX51_CHIP_REV_2_3 0x23 -#define MX51_CHIP_REV_3_0 0x30 -#define MX51_CHIP_REV_3_1 0x31 -#define MX51_CHIP_REV_3_2 0x32 - -/* Mandatory defines used globally */ +#define MX51_CHIP_REV_1_0 0x10 +#define MX51_CHIP_REV_1_1 0x11 +#define MX51_CHIP_REV_1_2 0x12 +#define MX51_CHIP_REV_1_3 0x13 +#define MX51_CHIP_REV_2_0 0x20 +#define MX51_CHIP_REV_2_1 0x21 +#define MX51_CHIP_REV_2_2 0x22 +#define MX51_CHIP_REV_2_3 0x23 +#define MX51_CHIP_REV_3_0 0x30 +#define MX51_CHIP_REV_3_1 0x31 +#define MX51_CHIP_REV_3_2 0x32 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) - extern int mx51_revision(void); #endif -#endif /* __ASM_ARCH_MXC_MX51_H__ */ +/* tape-out 1 defines */ +#define MX51_TZIC_BASE_ADDR_TO1 0x8fffc000 + +#endif /* ifndef __MACH_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index 4acd1143a9bd..95be51bfe9a9 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -1,7 +1,7 @@ /* * Copyright (C) 1999 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -28,8 +28,34 @@ static inline void arch_idle(void) mxc91231_prepare_idle(); } #endif - - cpu_do_idle(); + /* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */ + if (cpu_is_mx31() || cpu_is_mx35()) { + unsigned long reg = 0; + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); + } else + cpu_do_idle(); } void arch_reset(char mode, const char *cmd); diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index d9bd37e4667a..9dd9c2085aad 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -99,6 +99,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) uart_base = MX3X_UART2_BASE_ADDR; break; case MACH_TYPE_MX51_BABBAGE: + case MACH_TYPE_EUKREA_CPUIMX51SD: uart_base = MX51_UART1_BASE_ADDR; break; default: diff --git a/arch/arm/plat-mxc/iram_alloc.c b/arch/arm/plat-mxc/iram_alloc.c new file mode 100644 index 000000000000..074c3869626a --- /dev/null +++ b/arch/arm/plat-mxc/iram_alloc.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/genalloc.h> +#include <mach/iram.h> + +static unsigned long iram_phys_base; +static void __iomem *iram_virt_base; +static struct gen_pool *iram_pool; + +static inline void __iomem *iram_phys_to_virt(unsigned long p) +{ + return iram_virt_base + (p - iram_phys_base); +} + +void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) +{ + if (!iram_pool) + return NULL; + + *dma_addr = gen_pool_alloc(iram_pool, size); + pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr); + if (!*dma_addr) + return NULL; + return iram_phys_to_virt(*dma_addr); +} +EXPORT_SYMBOL(iram_alloc); + +void iram_free(unsigned long addr, unsigned int size) +{ + if (!iram_pool) + return; + + gen_pool_free(iram_pool, addr, size); +} +EXPORT_SYMBOL(iram_free); + +int __init iram_init(unsigned long base, unsigned long size) +{ + iram_phys_base = base; + + iram_pool = gen_pool_create(PAGE_SHIFT, -1); + if (!iram_pool) + return -ENOMEM; + + gen_pool_add(iram_pool, base, size, -1); + iram_virt_base = ioremap(iram_phys_base, size); + if (!iram_virt_base) + return -EIO; + + pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base); + return 0; +} diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index 977c8f9a07a2..85e6fd212a41 100644 --- a/arch/arm/plat-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -102,6 +102,22 @@ static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); } +static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int val) +{ + if (val) + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS); + else + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC); +} + +static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int val) +{ + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); + __nmk_gpio_set_output(nmk_chip, offset, val); +} + static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, pin_cfg_t cfg) { @@ -118,20 +134,29 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, [3] /* illegal */ = "??" }; static const char *slpmnames[] = { - [NMK_GPIO_SLPM_INPUT] = "input", - [NMK_GPIO_SLPM_NOCHANGE] = "no-change", + [NMK_GPIO_SLPM_INPUT] = "input/wakeup", + [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup", }; int pin = PIN_NUM(cfg); int pull = PIN_PULL(cfg); int af = PIN_ALT(cfg); int slpm = PIN_SLPM(cfg); + int output = PIN_DIR(cfg); + int val = PIN_VAL(cfg); - dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s\n", - pin, afnames[af], pullnames[pull], slpmnames[slpm]); + dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s (%s%s)\n", + pin, afnames[af], pullnames[pull], slpmnames[slpm], + output ? "output " : "input", + output ? (val ? "high" : "low") : ""); + + if (output) + __nmk_gpio_make_output(nmk_chip, offset, val); + else { + __nmk_gpio_make_input(nmk_chip, offset); + __nmk_gpio_set_pull(nmk_chip, offset, pull); + } - __nmk_gpio_make_input(nmk_chip, offset); - __nmk_gpio_set_pull(nmk_chip, offset, pull); __nmk_gpio_set_slpm(nmk_chip, offset, slpm); __nmk_gpio_set_mode(nmk_chip, offset, af); } @@ -200,6 +225,10 @@ EXPORT_SYMBOL(nmk_config_pins); * changed to an input (with pullup/down enabled) in sleep and deep sleep. If * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was * configured even when in sleep and deep sleep. + * + * On DB8500v2 onwards, this setting loses the previous meaning and instead + * indicates if wakeup detection is enabled on the pin. Note that + * enable_irq_wake() will automatically enable wakeup detection. */ int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) { @@ -367,7 +396,27 @@ static void nmk_gpio_irq_unmask(unsigned int irq) static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on) { - return nmk_gpio_irq_modify(irq, WAKE, on); + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + int gpio; + + gpio = NOMADIK_IRQ_TO_GPIO(irq); + nmk_chip = get_irq_chip_data(irq); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); +#ifdef CONFIG_ARCH_U8500 + if (cpu_is_u8500v2()) { + __nmk_gpio_set_slpm(nmk_chip, gpio, + on ? NMK_GPIO_SLPM_WAKEUP_ENABLE + : NMK_GPIO_SLPM_WAKEUP_DISABLE); + } +#endif + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; } static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) @@ -495,12 +544,8 @@ static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, { struct nmk_gpio_chip *nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); - u32 bit = 1 << offset; - if (val) - writel(bit, nmk_chip->addr + NMK_GPIO_DATS); - else - writel(bit, nmk_chip->addr + NMK_GPIO_DATC); + __nmk_gpio_set_output(nmk_chip, offset, val); } static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, @@ -509,8 +554,7 @@ static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, struct nmk_gpio_chip *nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); - nmk_gpio_set_output(chip, offset, val); + __nmk_gpio_make_output(nmk_chip, offset, val); return 0; } @@ -534,7 +578,7 @@ static struct gpio_chip nmk_gpio_template = { .can_sleep = 0, }; -static int __init nmk_gpio_probe(struct platform_device *dev) +static int __devinit nmk_gpio_probe(struct platform_device *dev) { struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; struct nmk_gpio_chip *nmk_chip; diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h index aba355101f49..67b113d639d8 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -65,7 +65,9 @@ enum nmk_gpio_pull { /* Sleep mode */ enum nmk_gpio_slpm { NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, NMK_GPIO_SLPM_NOCHANGE, + NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, }; extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h index 7eed11c1038d..8c5ae3f2acf8 100644 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ b/arch/arm/plat-nomadik/include/plat/pincfg.h @@ -19,12 +19,16 @@ * bit 9..10 - Alternate Function Selection * bit 11..12 - Pull up/down state * bit 13 - Sleep mode behaviour + * bit 14 - (sleep mode) Direction + * bit 15 - (sleep mode) Value (if output) * * to facilitate the definition, the following macros are provided * * PIN_CFG_DEFAULT - default config (0): * pull up/down = disabled - * sleep mode = input + * sleep mode = input/wakeup + * (sleep mode) direction = input + * (sleep mode) value = low * * PIN_CFG - default config with alternate function * PIN_CFG_PULL - default config with alternate function and pull up/down @@ -53,8 +57,36 @@ typedef unsigned long pin_cfg_t; #define PIN_SLPM_SHIFT 13 #define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) #define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) +#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) #define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) +/* These two replace the above in DB8500v2+ */ +#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) + +#define PIN_DIR_SHIFT 14 +#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) +#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) +#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) +#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) + +#define PIN_VAL_SHIFT 15 +#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) +#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) +#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) +#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) + +/* Shortcuts. Use these instead of separate DIR and VAL. */ +#define PIN_INPUT PIN_DIR_INPUT +#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) +#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) + +/* + * These are the same as the ones above, but should make more sense to the + * reader when seen along with a setting a pin to AF mode. + */ +#define PIN_SLPM_INPUT PIN_INPUT +#define PIN_SLPM_OUTPUT_LOW PIN_OUTPUT_LOW +#define PIN_SLPM_OUTPUT_HIGH PIN_OUTPUT_HIGH #define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT) diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 0054b9501a53..71934817e172 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -173,11 +173,7 @@ static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg, static int valid_sdram(unsigned long addr, unsigned long size) { - struct memblock_property res; - - res.base = addr; - res.size = size; - return !memblock_find(&res) && res.base == addr && res.size == size; + return memblock_is_region_memory(addr, size); } static int reserve_sdram(unsigned long addr, unsigned long size) diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h index 5177a9c5a25a..ecd6a488c497 100644 --- a/arch/arm/plat-omap/include/plat/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h @@ -18,6 +18,7 @@ #define OMAP_ARCH_SMP_H #include <asm/hardware/gic.h> +#include <asm/smp_mpidr.h> /* Needed for secondary core boot */ extern void omap_secondary_startup(void); @@ -33,15 +34,4 @@ static inline void smp_cross_call(const struct cpumask *mask) gic_raise_softirq(mask, 1); } -/* - * Read MPIDR: Multiprocessor affinity register - */ -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) - #endif diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h index 7b4eadc6df3a..abcc36eb1242 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h +++ b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h @@ -25,6 +25,13 @@ * * 4. matrix key and direct key will use the same debounce_interval by * default, which should be sufficient in most cases + * + * pxa168 keypad platform specific parameter + * + * NOTE: + * clear_wakeup_event callback is a workaround required to clear the + * keypad interrupt. The keypad wake must be cleared in addition to + * reading the MI/DI bits in the KPC register. */ struct pxa27x_keypad_platform_data { @@ -52,6 +59,9 @@ struct pxa27x_keypad_platform_data { /* key debounce interval */ unsigned int debounce_interval; + + /* clear wakeup event requirement for pxa168 */ + void (*clear_wakeup_event)(void); }; extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index c6a855db2fb6..25960966af7c 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,7 +7,7 @@ config PLAT_S5P bool - depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) + depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) default y select ARM_VIC if !ARCH_S5PV310 select ARM_GIC if ARCH_S5PV310 @@ -30,7 +30,7 @@ config S5P_EXT_INT bool help Use the external interrupts (other than GPIO interrupts.) - Note: Do not choose this for S5P6440. + Note: Do not choose this for S5P6440 and S5P6450. config S5P_DEV_FIMC0 bool @@ -46,3 +46,8 @@ config S5P_DEV_FIMC2 bool help Compile in platform device definitions for FIMC controller 2 + +config S5P_DEV_ONENAND + bool + help + Compile in platform device definition for OneNAND controller diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index b2e029673950..f3e917e27da8 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o +obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index b5e255265f20..8aaf4e6b60c3 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -74,6 +74,13 @@ struct clk clk_fout_epll = { .ctrlbit = (1 << 31), }; +/* DPLL clock output */ +struct clk clk_fout_dpll = { + .name = "fout_dpll", + .id = -1, + .ctrlbit = (1 << 31), +}; + /* VPLL clock output */ struct clk clk_fout_vpll = { .name = "fout_vpll", @@ -122,6 +129,17 @@ struct clksrc_sources clk_src_epll = { .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; +/* Possible clock sources for DPLL Mux */ +static struct clk *clk_src_dpll_list[] = { + [0] = &clk_fin_dpll, + [1] = &clk_fout_dpll, +}; + +struct clksrc_sources clk_src_dpll = { + .sources = clk_src_dpll_list, + .nr_sources = ARRAY_SIZE(clk_src_dpll_list), +}; + struct clk clk_vpll = { .name = "vpll", .id = -1, @@ -145,6 +163,7 @@ static struct clk *s5p_clks[] __initdata = { &clk_fout_apll, &clk_fout_mpll, &clk_fout_epll, + &clk_fout_dpll, &clk_fout_vpll, &clk_arm, &clk_vpll, diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index b07a078fd284..74f7f5a5446c 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -19,6 +19,7 @@ #include <plat/cpu.h> #include <plat/s5p6440.h> #include <plat/s5p6442.h> +#include <plat/s5p6450.h> #include <plat/s5pc100.h> #include <plat/s5pv210.h> #include <plat/s5pv310.h> @@ -27,6 +28,7 @@ static const char name_s5p6440[] = "S5P6440"; static const char name_s5p6442[] = "S5P6442"; +static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; static const char name_s5pv310[] = "S5PV310"; @@ -38,7 +40,7 @@ static struct cpu_table cpu_ids[] __initdata = { .map_io = s5p6440_map_io, .init_clocks = s5p6440_init_clocks, .init_uarts = s5p6440_init_uarts, - .init = s5p6440_init, + .init = s5p64x0_init, .name = name_s5p6440, }, { .idcode = 0x36442000, @@ -49,6 +51,14 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5p6442_init, .name = name_s5p6442, }, { + .idcode = 0x36450000, + .idmask = 0xffffff00, + .map_io = s5p6450_map_io, + .init_clocks = s5p6450_init_clocks, + .init_uarts = s5p6450_init_uarts, + .init = s5p64x0_init, + .name = name_s5p6450, + }, { .idcode = 0x43100000, .idmask = 0xfffff000, .map_io = s5pc100_map_io, @@ -89,33 +99,11 @@ static struct map_desc s5p_iodesc[] __initdata = { .length = SZ_64K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, -#ifdef CONFIG_ARM_VIC - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, -#endif - }, { .virtual = (unsigned long)S3C_VA_TIMER, .pfn = __phys_to_pfn(S5P_PA_TIMER), .length = SZ_16K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S3C_VA_WATCHDOG, .pfn = __phys_to_pfn(S3C_PA_WDT), .length = SZ_4K, diff --git a/arch/arm/mach-s5pv210/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c index f8ede33ee82b..6db926202caa 100644 --- a/arch/arm/mach-s5pv210/dev-onenand.c +++ b/arch/arm/plat-s5p/dev-onenand.c @@ -1,10 +1,12 @@ -/* - * linux/arch/arm/mach-s5pv210/dev-onenand.c +/* linux/arch/arm/plat-s5p/dev-onenand.c + * + * Copyright 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (c) 2008-2010 Samsung Electronics * Kyungmin Park <kyungmin.park@samsung.com> * - * S5PC110 series device definition for OneNAND devices + * S5P series device definition for OneNAND devices * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,15 +21,15 @@ #include <mach/irqs.h> #include <mach/map.h> -static struct resource s5pc110_onenand_resources[] = { +static struct resource s5p_onenand_resources[] = { [0] = { - .start = S5PC110_PA_ONENAND, - .end = S5PC110_PA_ONENAND + SZ_128K - 1, + .start = S5P_PA_ONENAND, + .end = S5P_PA_ONENAND + SZ_128K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = S5PC110_PA_ONENAND_DMA, - .end = S5PC110_PA_ONENAND_DMA + SZ_8K - 1, + .start = S5P_PA_ONENAND_DMA, + .end = S5P_PA_ONENAND_DMA + SZ_8K - 1, .flags = IORESOURCE_MEM, }, [2] = { @@ -37,19 +39,19 @@ static struct resource s5pc110_onenand_resources[] = { }, }; -struct platform_device s5pc110_device_onenand = { +struct platform_device s5p_device_onenand = { .name = "s5pc110-onenand", .id = -1, - .num_resources = ARRAY_SIZE(s5pc110_onenand_resources), - .resource = s5pc110_onenand_resources, + .num_resources = ARRAY_SIZE(s5p_onenand_resources), + .resource = s5p_onenand_resources, }; -void s5pc110_onenand_set_platdata(struct onenand_platform_data *pdata) +void s5p_onenand_set_platdata(struct onenand_platform_data *pdata) { struct onenand_platform_data *pd; pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL); if (!pd) printk(KERN_ERR "%s: no memory for platform data\n", __func__); - s5pc110_device_onenand.dev.platform_data = pd; + s5p_device_onenand.dev.platform_data = pd; } diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c index a89331ef4ae1..6a7342886171 100644 --- a/arch/arm/plat-s5p/dev-uart.c +++ b/arch/arm/plat-s5p/dev-uart.c @@ -119,6 +119,56 @@ static struct resource s5p_uart3_resource[] = { #endif }; +static struct resource s5p_uart4_resource[] = { +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 + [0] = { + .start = S5P_PA_UART4, + .end = S5P_PA_UART4 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX4, + .end = IRQ_S5P_UART_RX4, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX4, + .end = IRQ_S5P_UART_TX4, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR4, + .end = IRQ_S5P_UART_ERR4, + .flags = IORESOURCE_IRQ, + }, +#endif +}; + +static struct resource s5p_uart5_resource[] = { +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 + [0] = { + .start = S5P_PA_UART5, + .end = S5P_PA_UART5 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX5, + .end = IRQ_S5P_UART_RX5, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX5, + .end = IRQ_S5P_UART_TX5, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR5, + .end = IRQ_S5P_UART_ERR5, + .flags = IORESOURCE_IRQ, + }, +#endif +}; + struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { [0] = { .resources = s5p_uart0_resource, @@ -136,4 +186,12 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { .resources = s5p_uart3_resource, .nr_resources = ARRAY_SIZE(s5p_uart3_resource), }, + [4] = { + .resources = s5p_uart4_resource, + .nr_resources = ARRAY_SIZE(s5p_uart4_resource), + }, + [5] = { + .resources = s5p_uart5_resource, + .nr_resources = ARRAY_SIZE(s5p_uart5_resource), + }, }; diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h index 4e8fe08cb70d..bf28fadee7ae 100644 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ b/arch/arm/plat-s5p/include/plat/pll.h @@ -47,6 +47,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, } #define PLL46XX_KDIV_MASK (0xFFFF) +#define PLL4650C_KDIV_MASK (0xFFF) #define PLL46XX_MDIV_MASK (0x1FF) #define PLL46XX_PDIV_MASK (0x3F) #define PLL46XX_SDIV_MASK (0x7) @@ -57,6 +58,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, enum pll46xx_type_t { pll_4600, pll_4650, + pll_4650c, }; static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, @@ -72,6 +74,11 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; kdiv = pll_con1 & PLL46XX_KDIV_MASK; + if (pll_type == pll_4650c) + kdiv = pll_con1 & PLL4650C_KDIV_MASK; + else + kdiv = pll_con1 & PLL46XX_KDIV_MASK; + tmp = baseclk; if (pll_type == pll_4600) { diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h index 09418b1101fe..17036c898409 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h * - * Copyright 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Header file for s5p clock support * @@ -20,6 +20,7 @@ #define clk_fin_apll clk_ext_xtal_mux #define clk_fin_mpll clk_ext_xtal_mux #define clk_fin_epll clk_ext_xtal_mux +#define clk_fin_dpll clk_ext_xtal_mux #define clk_fin_vpll clk_ext_xtal_mux #define clk_fin_hpll clk_ext_xtal_mux @@ -30,6 +31,7 @@ extern struct clk s5p_clk_27m; extern struct clk clk_fout_apll; extern struct clk clk_fout_mpll; extern struct clk clk_fout_epll; +extern struct clk clk_fout_dpll; extern struct clk clk_fout_vpll; extern struct clk clk_arm; extern struct clk clk_vpll; @@ -37,8 +39,8 @@ extern struct clk clk_vpll; extern struct clksrc_sources clk_src_apll; extern struct clksrc_sources clk_src_mpll; extern struct clksrc_sources clk_src_epll; +extern struct clksrc_sources clk_src_dpll; -extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable); extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); #endif /* __ASM_PLAT_S5P_CLOCK_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h index a4cd75afeb3b..528585d2cafc 100644 --- a/arch/arm/plat-s5p/include/plat/s5p6440.h +++ b/arch/arm/plat-s5p/include/plat/s5p6440.h @@ -12,24 +12,23 @@ /* Common init code for S5P6440 related SoCs */ -extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s5p6440_register_clocks(void); extern void s5p6440_setup_clocks(void); #ifdef CONFIG_CPU_S5P6440 -extern int s5p6440_init(void); +extern int s5p64x0_init(void); extern void s5p6440_init_irq(void); extern void s5p6440_map_io(void); extern void s5p6440_init_clocks(int xtal); -#define s5p6440_init_uarts s5p6440_common_init_uarts +extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); #else #define s5p6440_init_clocks NULL #define s5p6440_init_uarts NULL #define s5p6440_map_io NULL -#define s5p6440_init NULL +#define s5p64x0_init NULL #endif /* S5P6440 timer */ diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-s5p/include/plat/s5p6450.h new file mode 100644 index 000000000000..640a41c26be3 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p6450.h @@ -0,0 +1,36 @@ +/* arch/arm/plat-s5p/include/plat/s5p6450.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for s5p6450 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5P6450 related SoCs */ + +extern void s5p6450_register_clocks(void); +extern void s5p6450_setup_clocks(void); + +#ifdef CONFIG_CPU_S5P6450 + +extern int s5p64x0_init(void); +extern void s5p6450_init_irq(void); +extern void s5p6450_map_io(void); +extern void s5p6450_init_clocks(int xtal); + +extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +#else +#define s5p6450_init_clocks NULL +#define s5p6450_init_uarts NULL +#define s5p6450_map_io NULL +#define s5p64x0_init NULL +#endif + +/* S5P6450 timer */ + +extern struct sys_timer s5p6450_timer; diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 6412933d6fbb..9addb3dfb4bc 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -79,7 +79,7 @@ extern struct sysdev_class s3c2442_sysclass; extern struct sysdev_class s3c2443_sysclass; extern struct sysdev_class s3c6410_sysclass; extern struct sysdev_class s3c64xx_sysclass; -extern struct sysdev_class s5p6440_sysclass; +extern struct sysdev_class s5p64x0_sysclass; extern struct sysdev_class s5p6442_sysclass; extern struct sysdev_class s5pv210_sysclass; diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 85f6f23a510f..7d448e138792 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -67,13 +67,15 @@ extern struct platform_device s5pv210_device_spi0; extern struct platform_device s5pv210_device_spi1; extern struct platform_device s5p6440_device_spi0; extern struct platform_device s5p6440_device_spi1; +extern struct platform_device s5p6450_device_spi0; +extern struct platform_device s5p6450_device_spi1; extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_nand; extern struct platform_device s3c_device_onenand; extern struct platform_device s3c64xx_device_onenand1; -extern struct platform_device s5pc110_device_onenand; +extern struct platform_device s5p_device_onenand; extern struct platform_device s3c_device_usbgadget; extern struct platform_device s3c_device_usb_hsotg; @@ -95,6 +97,9 @@ extern struct platform_device s5p6442_device_spi; extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; +extern struct platform_device s5p6450_device_iis0; +extern struct platform_device s5p6450_device_pcm0; + extern struct platform_device s5pc100_device_ac97; extern struct platform_device s5pc100_device_pcm0; extern struct platform_device s5pc100_device_pcm1; diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h index 5fe6721b57f7..810744213120 100644 --- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h @@ -32,6 +32,12 @@ enum dma_ch { DMACH_UART2_TX, DMACH_UART3_RX, DMACH_UART3_TX, + DMACH_UART4_RX, + DMACH_UART4_TX, + DMACH_UART5_RX, + DMACH_UART5_TX, + DMACH_USI_RX, + DMACH_USI_TX, DMACH_IRDA, DMACH_I2S0_RX, DMACH_I2S0_TX, @@ -64,6 +70,20 @@ enum dma_ch { DMACH_MSM_REQ2, DMACH_MSM_REQ1, DMACH_MSM_REQ0, + DMACH_SLIMBUS0_RX, + DMACH_SLIMBUS0_TX, + DMACH_SLIMBUS0AUX_RX, + DMACH_SLIMBUS0AUX_TX, + DMACH_SLIMBUS1_RX, + DMACH_SLIMBUS1_TX, + DMACH_SLIMBUS2_RX, + DMACH_SLIMBUS2_TX, + DMACH_SLIMBUS3_RX, + DMACH_SLIMBUS3_TX, + DMACH_SLIMBUS4_RX, + DMACH_SLIMBUS4_TX, + DMACH_SLIMBUS5_RX, + DMACH_SLIMBUS5_TX, /* END Marker, also used to denote a reserved channel */ DMACH_MAX, }; diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index e5aba8f95b79..ff1a561b326e 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -32,6 +32,8 @@ struct s3c64xx_spi_csinfo { * struct s3c64xx_spi_info - SPI Controller defining structure * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. * @src_clk_name: Platform name of the corresponding clock. + * @clk_from_cmu: If the SPI clock/prescalar control block is present + * by the platform's clock-management-unit and not in SPI controller. * @num_cs: Number of CS this controller emulates. * @cfg_gpio: Configure pins for this SPI controller. * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 @@ -41,6 +43,7 @@ struct s3c64xx_spi_csinfo { struct s3c64xx_spi_info { int src_clk_nr; char *src_clk_name; + bool clk_from_cmu; int num_cs; @@ -65,7 +68,7 @@ struct s3c64xx_spi_info { extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); -extern void s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); +extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); #endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index 37fa593884ee..e91270e4f640 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -14,11 +14,9 @@ #include <linux/amba/serial.h> #include <mach/spear.h> - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #SPEAR_DBG_UART_BASE @ Physical base - movne \rx, #VA_SPEAR_DBG_UART_BASE @ Virtual base + .macro addruart, rp, rv + mov \rp, #SPEAR_DBG_UART_BASE @ Physical base + mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base .endm .macro senduart, rd, rx diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S index 1b9348bf0e49..d3a0985c9681 100644 --- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S +++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S @@ -16,13 +16,10 @@ * http://www.gnu.org/copyleft/gpl.html */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical base address - addeq \rx, \rx, #0x00070000 - movne \rx, #0xf0000000 @ virtual base - addne \rx, \rx, #0x00070000 + .macro addruart, rp, rv + mov \rp, #0x00070000 + add \rv, \rp, #0xf0000000 @ virtual base + add \rp, \rp, #0x80000000 @ physical base .endm .macro senduart,rd,rx diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig new file mode 100644 index 000000000000..1bf499570f42 --- /dev/null +++ b/arch/arm/plat-tcc/Kconfig @@ -0,0 +1,20 @@ +if ARCH_TCC_926 + +menu "Telechips ARM926-based CPUs" + +choice + prompt "Telechips CPU type:" + default ARCH_TCC8K + +config ARCH_TCC8K + bool TCC8000 + select USB_ARCH_HAS_OHCI + help + Support for Telechips TCC8000 systems + +endchoice + +source "arch/arm/mach-tcc8k/Kconfig" + +endmenu +endif diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile new file mode 100644 index 000000000000..eceabc869b8f --- /dev/null +++ b/arch/arm/plat-tcc/Makefile @@ -0,0 +1,3 @@ +# "Telechips Platform Common Modules" + +obj-y := clock.o system.o diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c new file mode 100644 index 000000000000..f3ced10d5271 --- /dev/null +++ b/arch/arm/plat-tcc/clock.c @@ -0,0 +1,179 @@ +/* + * Clock framework for Telechips SoCs + * Based on arch/arm/plat-mxc/clock.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2010 Hans J. Koch, hjk@linutronix.de + * + * Licensed under the terms of the GPL v2. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/string.h> + +#include <mach/clock.h> +#include <mach/hardware.h> + +static DEFINE_MUTEX(clocks_mutex); + +/*------------------------------------------------------------------------- + * Standard clock functions defined in include/linux/clk.h + *-------------------------------------------------------------------------*/ + +static void __clk_disable(struct clk *clk) +{ + BUG_ON(clk->refcount == 0); + + if (!(--clk->refcount) && clk->disable) { + /* Unconditionally disable the clock in hardware */ + clk->disable(clk); + /* recursively disable parents */ + if (clk->parent) + __clk_disable(clk->parent); + } +} + +static int __clk_enable(struct clk *clk) +{ + int ret = 0; + + if (clk->refcount++ == 0 && clk->enable) { + if (clk->parent) + ret = __clk_enable(clk->parent); + if (ret) + return ret; + else + return clk->enable(clk); + } + + return 0; +} + +/* This function increments the reference count on the clock and enables the + * clock if not already enabled. The parent clock tree is recursively enabled + */ +int clk_enable(struct clk *clk) +{ + int ret = 0; + + if (!clk) + return -EINVAL; + + mutex_lock(&clocks_mutex); + ret = __clk_enable(clk); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_enable); + +/* This function decrements the reference count on the clock and disables + * the clock when reference count is 0. The parent clock tree is + * recursively disabled + */ +void clk_disable(struct clk *clk) +{ + if (!clk) + return; + + mutex_lock(&clocks_mutex); + __clk_disable(clk); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL_GPL(clk_disable); + +/* Retrieve the *current* clock rate. If the clock itself + * does not provide a special calculation routine, ask + * its parent and so on, until one is able to return + * a valid clock rate + */ +unsigned long clk_get_rate(struct clk *clk) +{ + if (!clk) + return 0UL; + + if (clk->get_rate) + return clk->get_rate(clk); + + return clk_get_rate(clk->parent); +} +EXPORT_SYMBOL_GPL(clk_get_rate); + +/* Round the requested clock rate to the nearest supported + * rate that is less than or equal to the requested rate. + * This is dependent on the clock's current parent. + */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (!clk) + return 0; + if (!clk->round_rate) + return 0; + + return clk->round_rate(clk, rate); +} +EXPORT_SYMBOL_GPL(clk_round_rate); + +/* Set the clock to the requested clock rate. The rate must + * match a supported rate exactly based on what clk_round_rate returns + */ +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + + if (!clk) + return ret; + if (!clk->set_rate || !rate) + return ret; + + mutex_lock(&clocks_mutex); + ret = clk->set_rate(clk, rate); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_rate); + +/* Set the clock's parent to another clock source */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + struct clk *old; + int ret = -EINVAL; + + if (!clk) + return ret; + if (!clk->set_parent || !parent) + return ret; + + mutex_lock(&clocks_mutex); + old = clk->parent; + if (clk->refcount) + __clk_enable(parent); + ret = clk->set_parent(clk, parent); + if (ret) + old = parent; + if (clk->refcount) + __clk_disable(old); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_parent); + +/* Retrieve the clock's parent clock source */ +struct clk *clk_get_parent(struct clk *clk) +{ + if (!clk) + return NULL; + + return clk->parent; +} +EXPORT_SYMBOL_GPL(clk_get_parent); diff --git a/arch/arm/plat-tcc/include/mach/clkdev.h b/arch/arm/plat-tcc/include/mach/clkdev.h new file mode 100644 index 000000000000..04b37a89801c --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h new file mode 100644 index 000000000000..a12f58ad71a8 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/clock.h @@ -0,0 +1,48 @@ +/* + * Low level clock header file for Telechips TCC architecture + * (C) 2010 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the GPL v2. + */ + +#ifndef __ASM_ARCH_TCC_CLOCK_H__ +#define __ASM_ARCH_TCC_CLOCK_H__ + +#ifndef __ASSEMBLY__ + +struct clk { + struct clk *parent; + /* id number of a root clock, 0 for normal clocks */ + int root_id; + /* Reference count of clock enable/disable */ + int refcount; + /* Address of associated BCLKCTRx register. Must be set. */ + void __iomem *bclkctr; + /* Bit position for BCLKCTRx. Must be set. */ + int bclk_shift; + /* Address of ACLKxxx register, if any. */ + void __iomem *aclkreg; + /* get the current clock rate (always a fresh value) */ + unsigned long (*get_rate) (struct clk *); + /* Function ptr to set the clock to a new rate. The rate must match a + supported rate returned from round_rate. Leave blank if clock is not + programmable */ + int (*set_rate) (struct clk *, unsigned long); + /* Function ptr to round the requested clock rate to the nearest + supported rate that is less than or equal to the requested rate. */ + unsigned long (*round_rate) (struct clk *, unsigned long); + /* Function ptr to enable the clock. Leave blank if clock can not + be gated. */ + int (*enable) (struct clk *); + /* Function ptr to disable the clock. Leave blank if clock can not + be gated. */ + void (*disable) (struct clk *); + /* Function ptr to set the parent clock of the clock. */ + int (*set_parent) (struct clk *, struct clk *); +}; + +int clk_register(struct clk *clk); +void clk_unregister(struct clk *clk); + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_ARCH_MXC_CLOCK_H__ */ diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S new file mode 100644 index 000000000000..7662f736e42b --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/debug-macro.S @@ -0,0 +1,32 @@ +/* + * Copyright (C) 1994-1999 Russell King + * Copyright (C) 2008-2009 Telechips + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + .macro addruart, rp, rv + moveq \rp, #0x90000000 @ physical base address + movne \rv, #0xF1000000 @ virtual base + orr \rp, \rp, #0x00007000 @ UART0 + orr \rv, \rv, #0x00007000 @ UART0 + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #0x44] + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1001: + ldr \rd, [\rx, #0x14] + tst \rd, #0x20 + + beq 1001b + .endm diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S new file mode 100644 index 000000000000..748f401e4b6d --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/entry-macro.S @@ -0,0 +1,68 @@ +/* + * include/asm-arm/arch-tcc83x/entry-macro.S + * + * Author : <linux@telechips.com> + * Created: June 10, 2008 + * Description: Low-level IRQ helper macros for Telechips-based platforms + * + * Copyright (C) 2008-2009 Telechips + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/hardware.h> +#include <mach/irqs.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \base, =0xF2003000 @ base address of PIC registers + + @@ read MREQ register of PIC0 + + mov \irqnr, #0 + ldr \irqstat, [\base, #0x00000014 ] @ lower 32 interrupts + cmp \irqstat, #0 + bne 1001f + + @@ read MREQ register of PIC1 + + ldr \irqstat, [\base, #0x00000094] @ upper 32 interrupts + cmp \irqstat, #0 + beq 1002f + mov \irqnr, #0x20 + +1001: + movs \tmp, \irqstat, lsl #16 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #16 + + movs \tmp, \irqstat, lsl #8 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #8 + + movs \tmp, \irqstat, lsl #4 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #4 + + movs \tmp, \irqstat, lsl #2 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #2 + + movs \tmp, \irqstat, lsl #1 + addeq \irqnr, \irqnr, #1 + orrs \base, \base, #1 +1002: + @@ exit here, Z flag unset if IRQ + + .endm diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h new file mode 100644 index 000000000000..e70d126ccaf3 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/hardware.h @@ -0,0 +1,43 @@ +/* + * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> + * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> + * and Dirk Behme <dirk.behme@de.bosch.com> + * Rewritten by: <linux@telechips.com> + * Description: Hardware definitions for TCC8300 processors and boards + * + * Copyright (C) 2001 RidgeRun, Inc. + * Copyright (C) 2008-2009 Telechips + * + * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GNU Pulic License version 2. + */ + +#ifndef __ASM_ARCH_TCC_HARDWARE_H +#define __ASM_ARCH_TCC_HARDWARE_H + +#include <asm/sizes.h> +#ifndef __ASSEMBLER__ +#include <asm/types.h> +#endif +#include <mach/io.h> + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE 0xfffece00 +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +/* DPLL control registers */ +#define DPLL_CTL 0xfffecf00 + +#endif /* __ASM_ARCH_TCC_HARDWARE_H */ diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h new file mode 100644 index 000000000000..3e911d3ea0f1 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/io.h @@ -0,0 +1,23 @@ +/* + * IO definitions for TCC8000 processors and boards + * + * Copyright (C) 1997-1999 Russell King + * Copyright (C) 2008-2009 Telechips + * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GNU Public License version 2. + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h new file mode 100644 index 000000000000..da863894d498 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/irqs.h @@ -0,0 +1,83 @@ +/* + * IRQ definitions for TCC8xxx + * + * Copyright (C) 2008-2009 Telechips + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL v2. + * + */ + +#ifndef __ASM_ARCH_TCC_IRQS_H +#define __ASM_ARCH_TCC_IRQS_H + +#define NR_IRQS 64 + +/* PIC0 interrupts */ +#define INT_ADMA1 0 +#define INT_BDMA 1 +#define INT_ADMA0 2 +#define INT_GDMA1 3 +#define INT_I2S0RX 4 +#define INT_I2S0TX 5 +#define INT_TC 6 +#define INT_UART0 7 +#define INT_USBD 8 +#define INT_SPI0TX 9 +#define INT_UDMA 10 +#define INT_LIRQ 11 +#define INT_GDMA2 12 +#define INT_GDMA0 13 +#define INT_TC32 14 +#define INT_LCD 15 +#define INT_ADC 16 +#define INT_I2C 17 +#define INT_RTCP 18 +#define INT_RTCA 19 +#define INT_NFC 20 +#define INT_SD0 21 +#define INT_GSB0 22 +#define INT_PK 23 +#define INT_USBH0 24 +#define INT_USBH1 25 +#define INT_G2D 26 +#define INT_ECC 27 +#define INT_SPI0RX 28 +#define INT_UART1 29 +#define INT_MSCL 30 +#define INT_GSB1 31 +/* PIC1 interrupts */ +#define INT_E0 32 +#define INT_E1 33 +#define INT_E2 34 +#define INT_E3 35 +#define INT_E4 36 +#define INT_E5 37 +#define INT_E6 38 +#define INT_E7 39 +#define INT_UART2 40 +#define INT_UART3 41 +#define INT_SPI1TX 42 +#define INT_SPI1RX 43 +#define INT_GSB2 44 +#define INT_SPDIF 45 +#define INT_CDIF 46 +#define INT_VBON 47 +#define INT_VBOFF 48 +#define INT_SD1 49 +#define INT_UART4 50 +#define INT_GDMA3 51 +#define INT_I2S1RX 52 +#define INT_I2S1TX 53 +#define INT_CAN0 54 +#define INT_CAN1 55 +#define INT_GSB3 56 +#define INT_KRST 57 +#define INT_UNUSED 58 +#define INT_SD0D3 59 +#define INT_SD1D3 60 +#define INT_GPS0 61 +#define INT_GPS1 62 +#define INT_GPS2 63 + +#endif /* ASM_ARCH_TCC_IRQS_H */ diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h new file mode 100644 index 000000000000..cd91ba8a670b --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/memory.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 RidgeRun, Inc. + * Copyright (C) 2008-2009 Telechips + * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL v2. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x20000000) + +#endif diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h new file mode 100644 index 000000000000..909e6035d843 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/system.h @@ -0,0 +1,31 @@ +/* + * Author: <linux@telechips.com> + * Created: June 10, 2008 + * Description: LINUX SYSTEM FUNCTIONS for TCC83x + * + * Copyright (C) 2008-2009 Telechips + * + * Licensed under the terms of the GPL v2. + * + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H +#include <linux/clk.h> + +#include <asm/mach-types.h> +#include <mach/hardware.h> + +extern void plat_tcc_reboot(void); + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + plat_tcc_reboot(); +} + +#endif diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h new file mode 100644 index 000000000000..1d9428295332 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h @@ -0,0 +1,807 @@ +/* + * Telechips TCC8000 register definitions + * + * (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPLv2. + */ + +#ifndef TCC8K_REGS_H +#define TCC8K_REGS_H + +#include <linux/types.h> + +#define EXT_SDRAM_BASE 0x20000000 +#define INT_SRAM_BASE 0x30000000 +#define INT_SRAM_SIZE SZ_32K +#define CS0_BASE 0x40000000 +#define CS1_BASE 0x50000000 +#define CS1_SIZE SZ_64K +#define CS2_BASE 0x60000000 +#define CS3_BASE 0x70000000 +#define AHB_PERI_BASE 0x80000000 +#define AHB_PERI_SIZE SZ_64K +#define APB0_PERI_BASE 0x90000000 +#define APB0_PERI_SIZE SZ_128K +#define APB1_PERI_BASE 0x98000000 +#define APB1_PERI_SIZE SZ_128K +#define DATA_TCM_BASE 0xa0000000 +#define DATA_TCM_SIZE SZ_8K +#define EXT_MEM_CTRL_BASE 0xf0000000 +#define EXT_MEM_CTRL_SIZE SZ_4K + +#define CS1_BASE_VIRT (void __iomem *)0xf7000000 +#define AHB_PERI_BASE_VIRT (void __iomem *)0xf4000000 +#define APB0_PERI_BASE_VIRT (void __iomem *)0xf1000000 +#define APB1_PERI_BASE_VIRT (void __iomem *)0xf2000000 +#define EXT_MEM_CTRL_BASE_VIRT (void __iomem *)0xf3000000 +#define INT_SRAM_BASE_VIRT (void __iomem *)0xf5000000 +#define DATA_TCM_BASE_VIRT (void __iomem *)0xf6000000 + +#define __REG(x) (*((volatile u32 *)(x))) + +/* USB Device Controller Registers */ +#define UDC_BASE (AHB_PERI_BASE_VIRT + 0x8000) +#define UDC_BASE_PHYS (AHB_PERI_BASE + 0x8000) + +#define UDC_IR_OFFS 0x00 +#define UDC_EIR_OFFS 0x04 +#define UDC_EIER_OFFS 0x08 +#define UDC_FAR_OFFS 0x0c +#define UDC_FNR_OFFS 0x10 +#define UDC_EDR_OFFS 0x14 +#define UDC_RT_OFFS 0x18 +#define UDC_SSR_OFFS 0x1c +#define UDC_SCR_OFFS 0x20 +#define UDC_EP0SR_OFFS 0x24 +#define UDC_EP0CR_OFFS 0x28 + +#define UDC_ESR_OFFS 0x2c +#define UDC_ECR_OFFS 0x30 +#define UDC_BRCR_OFFS 0x34 +#define UDC_BWCR_OFFS 0x38 +#define UDC_MPR_OFFS 0x3c +#define UDC_DCR_OFFS 0x40 +#define UDC_DTCR_OFFS 0x44 +#define UDC_DFCR_OFFS 0x48 +#define UDC_DTTCR1_OFFS 0x4c +#define UDC_DTTCR2_OFFS 0x50 +#define UDC_ESR2_OFFS 0x54 + +#define UDC_SCR2_OFFS 0x58 +#define UDC_EP0BUF_OFFS 0x60 +#define UDC_EP1BUF_OFFS 0x64 +#define UDC_EP2BUF_OFFS 0x68 +#define UDC_EP3BUF_OFFS 0x6c +#define UDC_PLICR_OFFS 0xa0 +#define UDC_PCR_OFFS 0xa4 + +#define UDC_UPCR0_OFFS 0xc8 +#define UDC_UPCR1_OFFS 0xcc +#define UDC_UPCR2_OFFS 0xd0 +#define UDC_UPCR3_OFFS 0xd4 + +/* Bits in UDC_EIR */ +#define UDC_EIR_EP0I (1 << 0) +#define UDC_EIR_EP1I (1 << 1) +#define UDC_EIR_EP2I (1 << 2) +#define UDC_EIR_EP3I (1 << 3) +#define UDC_EIR_EPI_MASK 0x0f + +/* Bits in UDC_EIER */ +#define UDC_EIER_EP0IE (1 << 0) +#define UDC_EIER_EP1IE (1 << 1) +#define UDC_EIER_EP2IE (1 << 2) +#define UDC_EIER_EP3IE (1 << 3) + +/* Bits in UDC_FNR */ +#define UDC_FNR_FN_MASK 0x7ff +#define UDC_FNR_SM (1 << 13) +#define UDC_FNR_FTL (1 << 14) + +/* Bits in UDC_SSR */ +#define UDC_SSR_HFRES (1 << 0) +#define UDC_SSR_HFSUSP (1 << 1) +#define UDC_SSR_HFRM (1 << 2) +#define UDC_SSR_SDE (1 << 3) +#define UDC_SSR_HSP (1 << 4) +#define UDC_SSR_DM (1 << 5) +#define UDC_SSR_DP (1 << 6) +#define UDC_SSR_TBM (1 << 7) +#define UDC_SSR_VBON (1 << 8) +#define UDC_SSR_VBOFF (1 << 9) +#define UDC_SSR_EOERR (1 << 10) +#define UDC_SSR_DCERR (1 << 11) +#define UDC_SSR_TCERR (1 << 12) +#define UDC_SSR_BSERR (1 << 13) +#define UDC_SSR_TMERR (1 << 14) +#define UDC_SSR_BAERR (1 << 15) + +/* Bits in UDC_SCR */ +#define UDC_SCR_HRESE (1 << 0) +#define UDC_SCR_HSSPE (1 << 1) +#define UDC_SCR_RRDE (1 << 5) +#define UDC_SCR_SPDEN (1 << 6) +#define UDC_SCR_DIEN (1 << 12) + +/* Bits in UDC_EP0SR */ +#define UDC_EP0SR_RSR (1 << 0) +#define UDC_EP0SR_TST (1 << 1) +#define UDC_EP0SR_SHT (1 << 4) +#define UDC_EP0SR_LWO (1 << 6) + +/* Bits in UDC_EP0CR */ +#define UDC_EP0CR_ESS (1 << 1) + +/* Bits in UDC_ESR */ +#define UDC_ESR_RPS (1 << 0) +#define UDC_ESR_TPS (1 << 1) +#define UDC_ESR_LWO (1 << 4) +#define UDC_ESR_FFS (1 << 6) + +/* Bits in UDC_ECR */ +#define UDC_ECR_ESS (1 << 1) +#define UDC_ECR_CDP (1 << 2) + +#define UDC_ECR_FLUSH (1 << 6) +#define UDC_ECR_DUEN (1 << 7) + +/* Bits in UDC_UPCR0 */ +#define UDC_UPCR0_VBD (1 << 1) +#define UDC_UPCR0_VBDS (1 << 6) +#define UDC_UPCR0_RCD_12 (0x0 << 9) +#define UDC_UPCR0_RCD_24 (0x1 << 9) +#define UDC_UPCR0_RCD_48 (0x2 << 9) +#define UDC_UPCR0_RCS_EXT (0x1 << 11) +#define UDC_UPCR0_RCS_XTAL (0x0 << 11) + +/* Bits in UDC_UPCR1 */ +#define UDC_UPCR1_CDT(x) ((x) << 0) +#define UDC_UPCR1_OTGT(x) ((x) << 3) +#define UDC_UPCR1_SQRXT(x) ((x) << 8) +#define UDC_UPCR1_TXFSLST(x) ((x) << 12) + +/* Bits in UDC_UPCR2 */ +#define UDC_UPCR2_TP (1 << 0) +#define UDC_UPCR2_TXRT(x) ((x) << 2) +#define UDC_UPCR2_TXVRT(x) ((x) << 5) +#define UDC_UPCR2_OPMODE(x) ((x) << 9) +#define UDC_UPCR2_XCVRSEL(x) ((x) << 12) +#define UDC_UPCR2_TM (1 << 14) + +/* USB Host Controller registers */ +#define USBH0_BASE (AHB_PERI_BASE_VIRT + 0xb000) +#define USBH1_BASE (AHB_PERI_BASE_VIRT + 0xb800) + +#define OHCI_INT_ENABLE_OFFS 0x10 + +#define RH_DESCRIPTOR_A_OFFS 0x48 +#define RH_DESCRIPTOR_B_OFFS 0x4c + +#define USBHTCFG0_OFFS 0x100 +#define USBHHCFG0_OFFS 0x104 +#define USBHHCFG1_OFFS 0x104 + +/* DMA controller registers */ +#define DMAC0_BASE (AHB_PERI_BASE + 0x4000) +#define DMAC1_BASE (AHB_PERI_BASE + 0xa000) +#define DMAC2_BASE (AHB_PERI_BASE + 0x4800) +#define DMAC3_BASE (AHB_PERI_BASE + 0xa800) + +#define DMAC_CH_OFFSET(ch) (ch * 0x30) + +#define ST_SADR_OFFS 0x00 +#define SPARAM_OFFS 0x04 +#define C_SADR_OFFS 0x0c +#define ST_DADR_OFFS 0x10 +#define DPARAM_OFFS 0x14 +#define C_DADR_OFFS 0x1c +#define HCOUNT_OFFS 0x20 +#define CHCTRL_OFFS 0x24 +#define RPTCTRL_OFFS 0x28 +#define EXTREQ_A_OFFS 0x2c + +/* Bits in CHCTRL register */ +#define CHCTRL_EN (1 << 0) + +#define CHCTRL_IEN (1 << 2) +#define CHCTRL_FLAG (1 << 3) +#define CHCTRL_WSIZE8 (0 << 4) +#define CHCTRL_WSIZE16 (1 << 4) +#define CHCTRL_WSIZE32 (2 << 4) + +#define CHCTRL_BSIZE1 (0 << 6) +#define CHCTRL_BSIZE2 (1 << 6) +#define CHCTRL_BSIZE4 (2 << 6) +#define CHCTRL_BSIZE8 (3 << 6) + +#define CHCTRL_TYPE_SINGLE_E (0 << 8) +#define CHCTRL_TYPE_HW (1 << 8) +#define CHCTRL_TYPE_SW (2 << 8) +#define CHCTRL_TYPE_SINGLE_L (3 << 8) + +#define CHCTRL_BST (1 << 10) + +/* Use DMA controller 0, channel 2 for USB */ +#define USB_DMA_BASE (DMAC0_BASE + DMAC_CH_OFFSET(2)) + +/* NAND flash controller registers */ +#define NFC_BASE (AHB_PERI_BASE_VIRT + 0xd000) +#define NFC_BASE_PHYS (AHB_PERI_BASE + 0xd000) + +#define NFC_CMD_OFFS 0x00 +#define NFC_LADDR_OFFS 0x04 +#define NFC_BADDR_OFFS 0x08 +#define NFC_SADDR_OFFS 0x0c +#define NFC_WDATA_OFFS 0x10 +#define NFC_LDATA_OFFS 0x20 +#define NFC_SDATA_OFFS 0x40 +#define NFC_CTRL_OFFS 0x50 +#define NFC_PSTART_OFFS 0x54 +#define NFC_RSTART_OFFS 0x58 +#define NFC_DSIZE_OFFS 0x5c +#define NFC_IREQ_OFFS 0x60 +#define NFC_RST_OFFS 0x64 +#define NFC_CTRL1_OFFS 0x68 +#define NFC_MDATA_OFFS 0x70 + +#define NFC_WDATA_PHYS_ADDR (NFC_BASE_PHYS + NFC_WDATA_OFFS) + +/* Bits in NFC_CTRL */ +#define NFC_CTRL_BHLD_MASK (0xf << 0) +#define NFC_CTRL_BPW_MASK (0xf << 4) +#define NFC_CTRL_BSTP_MASK (0xf << 8) +#define NFC_CTRL_CADDR_MASK (0x7 << 12) +#define NFC_CTRL_CADDR_1 (0x0 << 12) +#define NFC_CTRL_CADDR_2 (0x1 << 12) +#define NFC_CTRL_CADDR_3 (0x2 << 12) +#define NFC_CTRL_CADDR_4 (0x3 << 12) +#define NFC_CTRL_CADDR_5 (0x4 << 12) +#define NFC_CTRL_MSK (1 << 15) +#define NFC_CTRL_PSIZE256 (0 << 16) +#define NFC_CTRL_PSIZE512 (1 << 16) +#define NFC_CTRL_PSIZE1024 (2 << 16) +#define NFC_CTRL_PSIZE2048 (3 << 16) +#define NFC_CTRL_PSIZE4096 (4 << 16) +#define NFC_CTRL_PSIZE_MASK (7 << 16) +#define NFC_CTRL_BSIZE1 (0 << 19) +#define NFC_CTRL_BSIZE2 (1 << 19) +#define NFC_CTRL_BSIZE4 (2 << 19) +#define NFC_CTRL_BSIZE8 (3 << 19) +#define NFC_CTRL_BSIZE_MASK (3 << 19) +#define NFC_CTRL_RDY (1 << 21) +#define NFC_CTRL_CS0SEL (1 << 22) +#define NFC_CTRL_CS1SEL (1 << 23) +#define NFC_CTRL_CS2SEL (1 << 24) +#define NFC_CTRL_CS3SEL (1 << 25) +#define NFC_CTRL_CSMASK (0xf << 22) +#define NFC_CTRL_BW (1 << 26) +#define NFC_CTRL_FS (1 << 27) +#define NFC_CTRL_DEN (1 << 28) +#define NFC_CTRL_READ_IEN (1 << 29) +#define NFC_CTRL_PROG_IEN (1 << 30) +#define NFC_CTRL_RDY_IEN (1 << 31) + +/* Bits in NFC_IREQ */ +#define NFC_IREQ_IRQ0 (1 << 0) +#define NFC_IREQ_IRQ1 (1 << 1) +#define NFC_IREQ_IRQ2 (1 << 2) + +#define NFC_IREQ_FLAG0 (1 << 4) +#define NFC_IREQ_FLAG1 (1 << 5) +#define NFC_IREQ_FLAG2 (1 << 6) + +/* MMC controller registers */ +#define MMC0_BASE (AHB_PERI_BASE_VIRT + 0xe000) +#define MMC1_BASE (AHB_PERI_BASE_VIRT + 0xe800) + +/* UART base addresses */ + +#define UART0_BASE (APB0_PERI_BASE_VIRT + 0x07000) +#define UART0_BASE_PHYS (APB0_PERI_BASE + 0x07000) +#define UART1_BASE (APB0_PERI_BASE_VIRT + 0x08000) +#define UART1_BASE_PHYS (APB0_PERI_BASE + 0x08000) +#define UART2_BASE (APB0_PERI_BASE_VIRT + 0x09000) +#define UART2_BASE_PHYS (APB0_PERI_BASE + 0x09000) +#define UART3_BASE (APB0_PERI_BASE_VIRT + 0x0a000) +#define UART3_BASE_PHYS (APB0_PERI_BASE + 0x0a000) +#define UART4_BASE (APB0_PERI_BASE_VIRT + 0x15000) +#define UART4_BASE_PHYS (APB0_PERI_BASE + 0x15000) + +#define UART_BASE UART0_BASE +#define UART_BASE_PHYS UART0_BASE_PHYS + +/* ECC controller */ +#define ECC_CTR_BASE (APB0_PERI_BASE_VIRT + 0xd000) + +#define ECC_CTRL_OFFS 0x00 +#define ECC_BASE_OFFS 0x04 +#define ECC_MASK_OFFS 0x08 +#define ECC_CLEAR_OFFS 0x0c +#define ECC4_0_OFFS 0x10 +#define ECC4_1_OFFS 0x14 + +#define ECC_EADDR0_OFFS 0x50 + +#define ECC_ERRNUM_OFFS 0x90 +#define ECC_IREQ_OFFS 0x94 + +/* Bits in ECC_CTRL */ +#define ECC_CTRL_ECC4_DIEN (1 << 28) +#define ECC_CTRL_ECC8_DIEN (1 << 29) +#define ECC_CTRL_ECC12_DIEN (1 << 30) +#define ECC_CTRL_ECC_DISABLE 0x0 +#define ECC_CTRL_ECC_SLC_ENC 0x8 +#define ECC_CTRL_ECC_SLC_DEC 0x9 +#define ECC_CTRL_ECC4_ENC 0xa +#define ECC_CTRL_ECC4_DEC 0xb +#define ECC_CTRL_ECC8_ENC 0xc +#define ECC_CTRL_ECC8_DEC 0xd +#define ECC_CTRL_ECC12_ENC 0xe +#define ECC_CTRL_ECC12_DEC 0xf + +/* Bits in ECC_IREQ */ +#define ECC_IREQ_E4DI (1 << 4) + +#define ECC_IREQ_E4DF (1 << 20) +#define ECC_IREQ_E4EF (1 << 21) + +/* Interrupt controller */ + +#define PIC0_BASE (APB1_PERI_BASE_VIRT + 0x3000) +#define PIC0_BASE_PHYS (APB1_PERI_BASE + 0x3000) + +#define PIC0_IEN_OFFS 0x00 +#define PIC0_CREQ_OFFS 0x04 +#define PIC0_IREQ_OFFS 0x08 +#define PIC0_IRQSEL_OFFS 0x0c +#define PIC0_SRC_OFFS 0x10 +#define PIC0_MREQ_OFFS 0x14 +#define PIC0_TSTREQ_OFFS 0x18 +#define PIC0_POL_OFFS 0x1c +#define PIC0_IRQ_OFFS 0x20 +#define PIC0_FIQ_OFFS 0x24 +#define PIC0_MIRQ_OFFS 0x28 +#define PIC0_MFIQ_OFFS 0x2c +#define PIC0_TMODE_OFFS 0x30 +#define PIC0_SYNC_OFFS 0x34 +#define PIC0_WKUP_OFFS 0x38 +#define PIC0_TMODEA_OFFS 0x3c +#define PIC0_INTOEN_OFFS 0x40 +#define PIC0_MEN0_OFFS 0x44 +#define PIC0_MEN_OFFS 0x48 + +#define PIC0_IEN __REG(PIC0_BASE + PIC0_IEN_OFFS) +#define PIC0_IEN_PHYS __REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS) +#define PIC0_CREQ __REG(PIC0_BASE + PIC0_CREQ_OFFS) +#define PIC0_CREQ_PHYS __REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS) +#define PIC0_IREQ __REG(PIC0_BASE + PIC0_IREQ_OFFS) +#define PIC0_IRQSEL __REG(PIC0_BASE + PIC0_IRQSEL_OFFS) +#define PIC0_IRQSEL_PHYS __REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS) +#define PIC0_SRC __REG(PIC0_BASE + PIC0_SRC_OFFS) +#define PIC0_MREQ __REG(PIC0_BASE + PIC0_MREQ_OFFS) +#define PIC0_TSTREQ __REG(PIC0_BASE + PIC0_TSTREQ_OFFS) +#define PIC0_POL __REG(PIC0_BASE + PIC0_POL_OFFS) +#define PIC0_IRQ __REG(PIC0_BASE + PIC0_IRQ_OFFS) +#define PIC0_FIQ __REG(PIC0_BASE + PIC0_FIQ_OFFS) +#define PIC0_MIRQ __REG(PIC0_BASE + PIC0_MIRQ_OFFS) +#define PIC0_MFIQ __REG(PIC0_BASE + PIC0_MFIQ_OFFS) +#define PIC0_TMODE __REG(PIC0_BASE + PIC0_TMODE_OFFS) +#define PIC0_TMODE_PHYS __REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS) +#define PIC0_SYNC __REG(PIC0_BASE + PIC0_SYNC_OFFS) +#define PIC0_WKUP __REG(PIC0_BASE + PIC0_WKUP_OFFS) +#define PIC0_TMODEA __REG(PIC0_BASE + PIC0_TMODEA_OFFS) +#define PIC0_INTOEN __REG(PIC0_BASE + PIC0_INTOEN_OFFS) +#define PIC0_MEN0 __REG(PIC0_BASE + PIC0_MEN0_OFFS) +#define PIC0_MEN __REG(PIC0_BASE + PIC0_MEN_OFFS) + +#define PIC1_BASE (APB1_PERI_BASE_VIRT + 0x3080) + +#define PIC1_IEN_OFFS 0x00 +#define PIC1_CREQ_OFFS 0x04 +#define PIC1_IREQ_OFFS 0x08 +#define PIC1_IRQSEL_OFFS 0x0c +#define PIC1_SRC_OFFS 0x10 +#define PIC1_MREQ_OFFS 0x14 +#define PIC1_TSTREQ_OFFS 0x18 +#define PIC1_POL_OFFS 0x1c +#define PIC1_IRQ_OFFS 0x20 +#define PIC1_FIQ_OFFS 0x24 +#define PIC1_MIRQ_OFFS 0x28 +#define PIC1_MFIQ_OFFS 0x2c +#define PIC1_TMODE_OFFS 0x30 +#define PIC1_SYNC_OFFS 0x34 +#define PIC1_WKUP_OFFS 0x38 +#define PIC1_TMODEA_OFFS 0x3c +#define PIC1_INTOEN_OFFS 0x40 +#define PIC1_MEN1_OFFS 0x44 +#define PIC1_MEN_OFFS 0x48 + +#define PIC1_IEN __REG(PIC1_BASE + PIC1_IEN_OFFS) +#define PIC1_CREQ __REG(PIC1_BASE + PIC1_CREQ_OFFS) +#define PIC1_IREQ __REG(PIC1_BASE + PIC1_IREQ_OFFS) +#define PIC1_IRQSEL __REG(PIC1_BASE + PIC1_IRQSEL_OFFS) +#define PIC1_SRC __REG(PIC1_BASE + PIC1_SRC_OFFS) +#define PIC1_MREQ __REG(PIC1_BASE + PIC1_MREQ_OFFS) +#define PIC1_TSTREQ __REG(PIC1_BASE + PIC1_TSTREQ_OFFS) +#define PIC1_POL __REG(PIC1_BASE + PIC1_POL_OFFS) +#define PIC1_IRQ __REG(PIC1_BASE + PIC1_IRQ_OFFS) +#define PIC1_FIQ __REG(PIC1_BASE + PIC1_FIQ_OFFS) +#define PIC1_MIRQ __REG(PIC1_BASE + PIC1_MIRQ_OFFS) +#define PIC1_MFIQ __REG(PIC1_BASE + PIC1_MFIQ_OFFS) +#define PIC1_TMODE __REG(PIC1_BASE + PIC1_TMODE_OFFS) +#define PIC1_SYNC __REG(PIC1_BASE + PIC1_SYNC_OFFS) +#define PIC1_WKUP __REG(PIC1_BASE + PIC1_WKUP_OFFS) +#define PIC1_TMODEA __REG(PIC1_BASE + PIC1_TMODEA_OFFS) +#define PIC1_INTOEN __REG(PIC1_BASE + PIC1_INTOEN_OFFS) +#define PIC1_MEN1 __REG(PIC1_BASE + PIC1_MEN1_OFFS) +#define PIC1_MEN __REG(PIC1_BASE + PIC1_MEN_OFFS) + +/* Timer registers */ +#define TIMER_BASE (APB1_PERI_BASE_VIRT + 0x4000) +#define TIMER_BASE_PHYS (APB1_PERI_BASE + 0x4000) + +#define TWDCFG_OFFS 0x70 + +#define TC32EN_OFFS 0x80 +#define TC32LDV_OFFS 0x84 +#define TC32CMP0_OFFS 0x88 +#define TC32CMP1_OFFS 0x8c +#define TC32PCNT_OFFS 0x90 +#define TC32MCNT_OFFS 0x94 +#define TC32IRQ_OFFS 0x98 + +/* Bits in TC32EN */ +#define TC32EN_PRESCALE_MASK 0x00ffffff +#define TC32EN_ENABLE (1 << 24) +#define TC32EN_LOADZERO (1 << 25) +#define TC32EN_STOPMODE (1 << 26) +#define TC32EN_LDM0 (1 << 28) +#define TC32EN_LDM1 (1 << 29) + +/* Bits in TC32IRQ */ +#define TC32IRQ_MSTAT_MASK 0x0000001f +#define TC32IRQ_RSTAT_MASK (0x1f << 8) +#define TC32IRQ_IRQEN0 (1 << 16) +#define TC32IRQ_IRQEN1 (1 << 17) +#define TC32IRQ_IRQEN2 (1 << 18) +#define TC32IRQ_IRQEN3 (1 << 19) +#define TC32IRQ_IRQEN4 (1 << 20) +#define TC32IRQ_RSYNC (1 << 30) +#define TC32IRQ_IRQCLR (1 << 31) + +/* GPIO registers */ +#define GPIOPD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOPD_DAT_OFFS 0x00 +#define GPIOPD_DOE_OFFS 0x04 +#define GPIOPD_FS0_OFFS 0x08 +#define GPIOPD_FS1_OFFS 0x0c +#define GPIOPD_FS2_OFFS 0x10 +#define GPIOPD_RPU_OFFS 0x30 +#define GPIOPD_RPD_OFFS 0x34 +#define GPIOPD_DV0_OFFS 0x38 +#define GPIOPD_DV1_OFFS 0x3c + +#define GPIOPS_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOPS_DAT_OFFS 0x40 +#define GPIOPS_DOE_OFFS 0x44 +#define GPIOPS_FS0_OFFS 0x48 +#define GPIOPS_FS1_OFFS 0x4c +#define GPIOPS_FS2_OFFS 0x50 +#define GPIOPS_FS3_OFFS 0x54 +#define GPIOPS_RPU_OFFS 0x70 +#define GPIOPS_RPD_OFFS 0x74 +#define GPIOPS_DV0_OFFS 0x78 +#define GPIOPS_DV1_OFFS 0x7c + +#define GPIOPS_FS1_SDH0_BITS 0x000000ff +#define GPIOPS_FS1_SDH1_BITS 0x0000ff00 + +#define GPIOPU_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOPU_DAT_OFFS 0x80 +#define GPIOPU_DOE_OFFS 0x84 +#define GPIOPU_FS0_OFFS 0x88 +#define GPIOPU_FS1_OFFS 0x8c +#define GPIOPU_FS2_OFFS 0x90 +#define GPIOPU_RPU_OFFS 0xb0 +#define GPIOPU_RPD_OFFS 0xb4 +#define GPIOPU_DV0_OFFS 0xb8 +#define GPIOPU_DV1_OFFS 0xbc + +#define GPIOPU_FS0_TXD0 (1 << 0) +#define GPIOPU_FS0_RXD0 (1 << 1) +#define GPIOPU_FS0_CTS0 (1 << 2) +#define GPIOPU_FS0_RTS0 (1 << 3) +#define GPIOPU_FS0_TXD1 (1 << 4) +#define GPIOPU_FS0_RXD1 (1 << 5) +#define GPIOPU_FS0_CTS1 (1 << 6) +#define GPIOPU_FS0_RTS1 (1 << 7) +#define GPIOPU_FS0_TXD2 (1 << 8) +#define GPIOPU_FS0_RXD2 (1 << 9) +#define GPIOPU_FS0_CTS2 (1 << 10) +#define GPIOPU_FS0_RTS2 (1 << 11) +#define GPIOPU_FS0_TXD3 (1 << 12) +#define GPIOPU_FS0_RXD3 (1 << 13) +#define GPIOPU_FS0_CTS3 (1 << 14) +#define GPIOPU_FS0_RTS3 (1 << 15) +#define GPIOPU_FS0_TXD4 (1 << 16) +#define GPIOPU_FS0_RXD4 (1 << 17) +#define GPIOPU_FS0_CTS4 (1 << 18) +#define GPIOPU_FS0_RTS4 (1 << 19) + +#define GPIOFC_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOFC_DAT_OFFS 0xc0 +#define GPIOFC_DOE_OFFS 0xc4 +#define GPIOFC_FS0_OFFS 0xc8 +#define GPIOFC_FS1_OFFS 0xcc +#define GPIOFC_FS2_OFFS 0xd0 +#define GPIOFC_FS3_OFFS 0xd4 +#define GPIOFC_RPU_OFFS 0xf0 +#define GPIOFC_RPD_OFFS 0xf4 +#define GPIOFC_DV0_OFFS 0xf8 +#define GPIOFC_DV1_OFFS 0xfc + +#define GPIOFD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOFD_DAT_OFFS 0x100 +#define GPIOFD_DOE_OFFS 0x104 +#define GPIOFD_FS0_OFFS 0x108 +#define GPIOFD_FS1_OFFS 0x10c +#define GPIOFD_FS2_OFFS 0x110 +#define GPIOFD_RPU_OFFS 0x130 +#define GPIOFD_RPD_OFFS 0x134 +#define GPIOFD_DV0_OFFS 0x138 +#define GPIOFD_DV1_OFFS 0x13c + +#define GPIOLC_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOLC_DAT_OFFS 0x140 +#define GPIOLC_DOE_OFFS 0x144 +#define GPIOLC_FS0_OFFS 0x148 +#define GPIOLC_FS1_OFFS 0x14c +#define GPIOLC_RPU_OFFS 0x170 +#define GPIOLC_RPD_OFFS 0x174 +#define GPIOLC_DV0_OFFS 0x178 +#define GPIOLC_DV1_OFFS 0x17c + +#define GPIOLD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOLD_DAT_OFFS 0x180 +#define GPIOLD_DOE_OFFS 0x184 +#define GPIOLD_FS0_OFFS 0x188 +#define GPIOLD_FS1_OFFS 0x18c +#define GPIOLD_FS2_OFFS 0x190 +#define GPIOLD_RPU_OFFS 0x1b0 +#define GPIOLD_RPD_OFFS 0x1b4 +#define GPIOLD_DV0_OFFS 0x1b8 +#define GPIOLD_DV1_OFFS 0x1bc + +#define GPIOAD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOAD_DAT_OFFS 0x1c0 +#define GPIOAD_DOE_OFFS 0x1c4 +#define GPIOAD_FS0_OFFS 0x1c8 +#define GPIOAD_RPU_OFFS 0x1f0 +#define GPIOAD_RPD_OFFS 0x1f4 +#define GPIOAD_DV0_OFFS 0x1f8 +#define GPIOAD_DV1_OFFS 0x1fc + +#define GPIOXC_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOXC_DAT_OFFS 0x200 +#define GPIOXC_DOE_OFFS 0x204 +#define GPIOXC_FS0_OFFS 0x208 +#define GPIOXC_RPU_OFFS 0x230 +#define GPIOXC_RPD_OFFS 0x234 +#define GPIOXC_DV0_OFFS 0x238 +#define GPIOXC_DV1_OFFS 0x23c + +#define GPIOXC_FS0 __REG(GPIOXC_BASE + GPIOXC_FS0_OFFS) + +#define GPIOXC_FS0_CS0 (1 << 26) +#define GPIOXC_FS0_CS1 (1 << 27) + +#define GPIOXD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOXD_DAT_OFFS 0x240 +#define GPIOXD_FS0_OFFS 0x248 +#define GPIOXD_RPU_OFFS 0x270 +#define GPIOXD_RPD_OFFS 0x274 +#define GPIOXD_DV0_OFFS 0x278 +#define GPIOXD_DV1_OFFS 0x27c + +#define GPIOPK_BASE (APB1_PERI_BASE_VIRT + 0x1c000) + +#define GPIOPK_RST_OFFS 0x008 +#define GPIOPK_DAT_OFFS 0x100 +#define GPIOPK_DOE_OFFS 0x104 +#define GPIOPK_FS0_OFFS 0x108 +#define GPIOPK_FS1_OFFS 0x10c +#define GPIOPK_FS2_OFFS 0x110 +#define GPIOPK_IRQST_OFFS 0x210 +#define GPIOPK_IRQEN_OFFS 0x214 +#define GPIOPK_IRQPOL_OFFS 0x218 +#define GPIOPK_IRQTM0_OFFS 0x21c +#define GPIOPK_IRQTM1_OFFS 0x220 +#define GPIOPK_CTL_OFFS 0x22c + +#define PMGPIO_BASE (APB1_PERI_BASE_VIRT + 0x10000) +#define BACKUP_RAM_BASE PMGPIO_BASE + +#define PMGPIO_DAT_OFFS 0x800 +#define PMGPIO_DOE_OFFS 0x804 +#define PMGPIO_FS0_OFFS 0x808 +#define PMGPIO_RPU_OFFS 0x810 +#define PMGPIO_RPD_OFFS 0x814 +#define PMGPIO_DV0_OFFS 0x818 +#define PMGPIO_DV1_OFFS 0x81c +#define PMGPIO_EE0_OFFS 0x820 +#define PMGPIO_EE1_OFFS 0x824 +#define PMGPIO_CTL_OFFS 0x828 +#define PMGPIO_DI_OFFS 0x82c +#define PMGPIO_STR_OFFS 0x830 +#define PMGPIO_STF_OFFS 0x834 +#define PMGPIO_POL_OFFS 0x838 +#define PMGPIO_APB_OFFS 0x800 + +/* Clock controller registers */ +#define CKC_BASE ((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000)) + +#define CLKCTRL_OFFS 0x00 +#define PLL0CFG_OFFS 0x04 +#define PLL1CFG_OFFS 0x08 +#define CLKDIVC0_OFFS 0x0c + +#define BCLKCTR0_OFFS 0x14 +#define SWRESET0_OFFS 0x18 + +#define BCLKCTR1_OFFS 0x60 +#define SWRESET1_OFFS 0x64 +#define PWDCTL_OFFS 0x68 +#define PLL2CFG_OFFS 0x6c +#define CLKDIVC1_OFFS 0x70 + +#define ACLKREF_OFFS 0x80 +#define ACLKI2C_OFFS 0x84 +#define ACLKSPI0_OFFS 0x88 +#define ACLKSPI1_OFFS 0x8c +#define ACLKUART0_OFFS 0x90 +#define ACLKUART1_OFFS 0x94 +#define ACLKUART2_OFFS 0x98 +#define ACLKUART3_OFFS 0x9c +#define ACLKUART4_OFFS 0xa0 +#define ACLKTCT_OFFS 0xa4 +#define ACLKTCX_OFFS 0xa8 +#define ACLKTCZ_OFFS 0xac +#define ACLKADC_OFFS 0xb0 +#define ACLKDAI0_OFFS 0xb4 +#define ACLKDAI1_OFFS 0xb8 +#define ACLKLCD_OFFS 0xbc +#define ACLKSPDIF_OFFS 0xc0 +#define ACLKUSBH_OFFS 0xc4 +#define ACLKSDH0_OFFS 0xc8 +#define ACLKSDH1_OFFS 0xcc +#define ACLKC3DEC_OFFS 0xd0 +#define ACLKEXT_OFFS 0xd4 +#define ACLKCAN0_OFFS 0xd8 +#define ACLKCAN1_OFFS 0xdc +#define ACLKGSB0_OFFS 0xe0 +#define ACLKGSB1_OFFS 0xe4 +#define ACLKGSB2_OFFS 0xe8 +#define ACLKGSB3_OFFS 0xec + +#define PLLxCFG_PD (1 << 31) + +/* CLKCTRL bits */ +#define CLKCTRL_XE (1 << 31) + +/* CLKDIVCx bits */ +#define CLKDIVC0_XTE (1 << 7) +#define CLKDIVC0_XE (1 << 15) +#define CLKDIVC0_P1E (1 << 23) +#define CLKDIVC0_P0E (1 << 31) + +#define CLKDIVC1_P2E (1 << 7) + +/* BCLKCTR0 clock bits */ +#define BCLKCTR0_USBD (1 << 4) +#define BCLKCTR0_ECC (1 << 9) +#define BCLKCTR0_USBH0 (1 << 11) +#define BCLKCTR0_NFC (1 << 16) + +/* BCLKCTR1 clock bits */ +#define BCLKCTR1_USBH1 (1 << 20) + +/* SWRESET0 bits */ +#define SWRESET0_USBD (1 << 4) +#define SWRESET0_USBH0 (1 << 11) + +/* SWRESET1 bits */ +#define SWRESET1_USBH1 (1 << 20) + +/* System clock sources. + * Note: These are the clock sources that serve as parents for + * all other clocks. They have no parents themselves. + * + * These values are used for struct clk->root_id. All clocks + * that are not system clock sources have this value set to + * CLK_SRC_NOROOT. + * The values for system clocks start with CLK_SRC_PLL0 == 0 + * because this gives us exactly the values needed for the lower + * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is + * defined as -1 to not disturb the order. + */ +enum root_clks { + CLK_SRC_NOROOT = -1, + CLK_SRC_PLL0 = 0, + CLK_SRC_PLL1, + CLK_SRC_PLL0DIV, + CLK_SRC_PLL1DIV, + CLK_SRC_XI, + CLK_SRC_XIDIV, + CLK_SRC_XTI, + CLK_SRC_XTIDIV, + CLK_SRC_PLL2, + CLK_SRC_PLL2DIV, + CLK_SRC_PK0, + CLK_SRC_PK1, + CLK_SRC_PK2, + CLK_SRC_PK3, + CLK_SRC_PK4, + CLK_SRC_48MHZ +}; + +#define CLK_SRC_MASK 0xf + +/* Bits in ACLK* registers */ +#define ACLK_EN (1 << 28) +#define ACLK_SEL_SHIFT 24 +#define ACLK_SEL_MASK 0x0f000000 +#define ACLK_DIV_MASK 0x00000fff + +/* System configuration registers */ + +#define SCFG_BASE (APB1_PERI_BASE_VIRT + 0x13000) + +#define BMI_OFFS 0x00 +#define AHBCON0_OFFS 0x04 +#define APBPWE_OFFS 0x08 +#define DTCMWAIT_OFFS 0x0c +#define ECCSEL_OFFS 0x10 +#define AHBCON1_OFFS 0x14 +#define SDHCFG_OFFS 0x18 +#define REMAP_OFFS 0x20 +#define LCDSIAE_OFFS 0x24 +#define XMCCFG_OFFS 0xe0 +#define IMCCFG_OFFS 0xe4 + +/* Values for ECCSEL */ +#define ECCSEL_EXTMEM 0x0 +#define ECCSEL_DTCM 0x1 +#define ECCSEL_INT_SRAM 0x2 +#define ECCSEL_AHB 0x3 + +/* Bits in XMCCFG */ +#define XMCCFG_NFCE (1 << 1) +#define XMCCFG_FDXD (1 << 2) + +/* External memory controller registers */ + +#define EMC_BASE EXT_MEM_CTRL_BASE + +#define SDCFG_OFFS 0x00 +#define SDFSM_OFFS 0x04 +#define MCFG_OFFS 0x08 + +#define CSCFG0_OFFS 0x10 +#define CSCFG1_OFFS 0x14 +#define CSCFG2_OFFS 0x18 +#define CSCFG3_OFFS 0x1c + +#define MCFG_SDEN (1 << 4) + +#endif /* TCC8K_REGS_H */ diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h new file mode 100644 index 000000000000..057acbe651d9 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/timex.h @@ -0,0 +1,5 @@ +/* + * A definition needed by arch core code. + * + */ +#define CLOCK_TICK_RATE (HZ * 100000UL) diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h new file mode 100644 index 000000000000..7a3e33a27a30 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/uncompress.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * This file is licensed under the terms of the GPL version 2. + */ + +#include <linux/serial_reg.h> +#include <linux/types.h> + +#include <mach/tcc8k-regs.h> + +unsigned int system_rev; + +#define ID_MASK 0x7fff + +static void putc(int c) +{ + u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2)); + u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2)); + + while (!(*uart_lsr & UART_LSR_THRE)) + barrier(); + *uart_tx = c; +} + +static inline void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h new file mode 100644 index 000000000000..99414d9c2b94 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/vmalloc.h @@ -0,0 +1,10 @@ +/* + * Author: <linux@telechips.com> + * Created: June 10, 2008 + * + * Copyright (C) 2000 Russell King. + * Copyright (C) 2008-2009 Telechips + * + * Licensed under the terms of the GPL v2. + */ +#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c new file mode 100644 index 000000000000..cc208fae3e7a --- /dev/null +++ b/arch/arm/plat-tcc/system.c @@ -0,0 +1,25 @@ +/* + * System functions for Telechips TCCxxxx SoCs + * + * Copyright (C) Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL v2. + * + */ + +#include <linux/io.h> + +#include <mach/tcc8k-regs.h> + +/* System reboot */ +void plat_tcc_reboot(void) +{ + /* Make sure clocks are on */ + __raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS); + + /* Enable watchdog reset */ + __raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS); + /* Wait for reset */ + while(1) + ; +} diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index f51572772e21..9ac87255a03a 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -90,6 +90,7 @@ config PLATFORM_AT32AP select ARCH_REQUIRE_GPIOLIB select GENERIC_ALLOCATOR select HAVE_FB_ATMEL + select HAVE_NET_MACB # # CPU types diff --git a/arch/avr32/include/asm/irqflags.h b/arch/avr32/include/asm/irqflags.h index 93570daac38a..006e9487372d 100644 --- a/arch/avr32/include/asm/irqflags.h +++ b/arch/avr32/include/asm/irqflags.h @@ -8,16 +8,14 @@ #ifndef __ASM_AVR32_IRQFLAGS_H #define __ASM_AVR32_IRQFLAGS_H +#include <linux/types.h> #include <asm/sysreg.h> -static inline unsigned long __raw_local_save_flags(void) +static inline unsigned long arch_local_save_flags(void) { return sysreg_read(SR); } -#define raw_local_save_flags(x) \ - do { (x) = __raw_local_save_flags(); } while (0) - /* * This will restore ALL status register flags, not only the interrupt * mask flag. @@ -25,44 +23,39 @@ static inline unsigned long __raw_local_save_flags(void) * The empty asm statement informs the compiler of this fact while * also serving as a barrier. */ -static inline void raw_local_irq_restore(unsigned long flags) +static inline void arch_local_irq_restore(unsigned long flags) { sysreg_write(SR, flags); asm volatile("" : : : "memory", "cc"); } -static inline void raw_local_irq_disable(void) +static inline void arch_local_irq_disable(void) { asm volatile("ssrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory"); } -static inline void raw_local_irq_enable(void) +static inline void arch_local_irq_enable(void) { asm volatile("csrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory"); } -static inline int raw_irqs_disabled_flags(unsigned long flags) +static inline bool arch_irqs_disabled_flags(unsigned long flags) { return (flags & SYSREG_BIT(GM)) != 0; } -static inline int raw_irqs_disabled(void) +static inline bool arch_irqs_disabled(void) { - unsigned long flags = __raw_local_save_flags(); - - return raw_irqs_disabled_flags(flags); + return arch_irqs_disabled_flags(arch_local_save_flags()); } -static inline unsigned long __raw_local_irq_save(void) +static inline unsigned long arch_local_irq_save(void) { - unsigned long flags = __raw_local_save_flags(); + unsigned long flags = arch_local_save_flags(); - raw_local_irq_disable(); + arch_local_irq_disable(); return flags; } -#define raw_local_irq_save(flags) \ - do { (flags) = __raw_local_irq_save(); } while (0) - #endif /* __ASM_AVR32_IRQFLAGS_H */ diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h index ed4f8c6db0cd..4223cf08ce83 100644 --- a/arch/blackfin/include/asm/bfin5xx_spi.h +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -11,26 +11,17 @@ #define MIN_SPI_BAUD_VAL 2 -#define SPI_READ 0 -#define SPI_WRITE 1 - -#define SPI_CTRL_OFF 0x0 -#define SPI_FLAG_OFF 0x4 -#define SPI_STAT_OFF 0x8 -#define SPI_TXBUFF_OFF 0xc -#define SPI_RXBUFF_OFF 0x10 -#define SPI_BAUD_OFF 0x14 -#define SPI_SHAW_OFF 0x18 - - #define BIT_CTL_ENABLE 0x4000 #define BIT_CTL_OPENDRAIN 0x2000 #define BIT_CTL_MASTER 0x1000 -#define BIT_CTL_POLAR 0x0800 -#define BIT_CTL_PHASE 0x0400 -#define BIT_CTL_BITORDER 0x0200 +#define BIT_CTL_CPOL 0x0800 +#define BIT_CTL_CPHA 0x0400 +#define BIT_CTL_LSBF 0x0200 #define BIT_CTL_WORDSIZE 0x0100 -#define BIT_CTL_MISOENABLE 0x0020 +#define BIT_CTL_EMISO 0x0020 +#define BIT_CTL_PSSE 0x0010 +#define BIT_CTL_GM 0x0008 +#define BIT_CTL_SZ 0x0004 #define BIT_CTL_RXMOD 0x0000 #define BIT_CTL_TXMOD 0x0001 #define BIT_CTL_TIMOD_DMA_TX 0x0003 @@ -50,61 +41,7 @@ #define BIT_STU_SENDOVER 0x0001 #define BIT_STU_RECVFULL 0x0020 -#define CFG_SPI_ENABLE 1 -#define CFG_SPI_DISABLE 0 - -#define CFG_SPI_OUTENABLE 1 -#define CFG_SPI_OUTDISABLE 0 - -#define CFG_SPI_ACTLOW 1 -#define CFG_SPI_ACTHIGH 0 - -#define CFG_SPI_PHASESTART 1 -#define CFG_SPI_PHASEMID 0 - -#define CFG_SPI_MASTER 1 -#define CFG_SPI_SLAVE 0 - -#define CFG_SPI_SENELAST 0 -#define CFG_SPI_SENDZERO 1 - -#define CFG_SPI_RCVFLUSH 1 -#define CFG_SPI_RCVDISCARD 0 - -#define CFG_SPI_LSBFIRST 1 -#define CFG_SPI_MSBFIRST 0 - -#define CFG_SPI_WORDSIZE16 1 -#define CFG_SPI_WORDSIZE8 0 - -#define CFG_SPI_MISOENABLE 1 -#define CFG_SPI_MISODISABLE 0 - -#define CFG_SPI_READ 0x00 -#define CFG_SPI_WRITE 0x01 -#define CFG_SPI_DMAREAD 0x02 -#define CFG_SPI_DMAWRITE 0x03 - -#define CFG_SPI_CSCLEARALL 0 -#define CFG_SPI_CHIPSEL1 1 -#define CFG_SPI_CHIPSEL2 2 -#define CFG_SPI_CHIPSEL3 3 -#define CFG_SPI_CHIPSEL4 4 -#define CFG_SPI_CHIPSEL5 5 -#define CFG_SPI_CHIPSEL6 6 -#define CFG_SPI_CHIPSEL7 7 - -#define CFG_SPI_CS1VALUE 1 -#define CFG_SPI_CS2VALUE 2 -#define CFG_SPI_CS3VALUE 3 -#define CFG_SPI_CS4VALUE 4 -#define CFG_SPI_CS5VALUE 5 -#define CFG_SPI_CS6VALUE 6 -#define CFG_SPI_CS7VALUE 7 - -#define CMD_SPI_SET_BAUDRATE 2 -#define CMD_SPI_GET_SYSTEMCLOCK 25 -#define CMD_SPI_SET_WRITECONTINUOUS 26 +#define MAX_CTRL_CS 8 /* cs in spi controller */ /* device.platform_data for SSP controller devices */ struct bfin5xx_spi_master { @@ -120,9 +57,7 @@ struct bfin5xx_spi_chip { u16 ctl_reg; u8 enable_dma; u8 bits_per_word; - u8 cs_change_per_word; u16 cs_chg_udelay; /* Some devices require 16-bit delays */ - u32 cs_gpio; /* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */ u16 idle_tx_val; u8 pio_interrupt; /* Enable spi data irq */ diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h index d3b40449ca0e..40f94a704c02 100644 --- a/arch/blackfin/include/asm/ipipe.h +++ b/arch/blackfin/include/asm/ipipe.h @@ -49,7 +49,7 @@ #define prepare_arch_switch(next) \ do { \ ipipe_schedule_notify(current, next); \ - local_irq_disable_hw(); \ + hard_local_irq_disable(); \ } while (0) #define task_hijacked(p) \ @@ -57,7 +57,7 @@ do { \ int __x__ = __ipipe_root_domain_p; \ __clear_bit(IPIPE_SYNC_FLAG, &ipipe_root_cpudom_var(status)); \ if (__x__) \ - local_irq_enable_hw(); \ + hard_local_irq_enable(); \ !__x__; \ }) @@ -167,7 +167,7 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul) #define __ipipe_run_isr(ipd, irq) \ do { \ if (!__ipipe_pipeline_head_p(ipd)) \ - local_irq_enable_hw(); \ + hard_local_irq_enable(); \ if (ipd == ipipe_root_domain) { \ if (unlikely(ipipe_virtual_irq_p(irq))) { \ irq_enter(); \ @@ -183,7 +183,7 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul) __ipipe_run_irqtail(); \ __set_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \ } \ - local_irq_disable_hw(); \ + hard_local_irq_disable(); \ } while (0) #define __ipipe_syscall_watched_p(p, sc) \ diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h index 813a1af3e865..41c4d70544ef 100644 --- a/arch/blackfin/include/asm/irqflags.h +++ b/arch/blackfin/include/asm/irqflags.h @@ -8,6 +8,8 @@ #ifndef __ASM_BFIN_IRQFLAGS_H__ #define __ASM_BFIN_IRQFLAGS_H__ +#include <mach/blackfin.h> + #ifdef CONFIG_SMP # include <asm/pda.h> # include <asm/processor.h> @@ -31,54 +33,108 @@ static inline unsigned long bfin_cli(void) return flags; } -#ifdef CONFIG_IPIPE - -#include <linux/compiler.h> -#include <linux/ipipe_base.h> -#include <linux/ipipe_trace.h> - #ifdef CONFIG_DEBUG_HWERR # define bfin_no_irqs 0x3f #else # define bfin_no_irqs 0x1f #endif -#define raw_local_irq_disable() \ - do { \ - ipipe_check_context(ipipe_root_domain); \ - __ipipe_stall_root(); \ - barrier(); \ - } while (0) +/*****************************************************************************/ +/* + * Hard, untraced CPU interrupt flag manipulation and access. + */ +static inline void __hard_local_irq_disable(void) +{ + bfin_cli(); +} + +static inline void __hard_local_irq_enable(void) +{ + bfin_sti(bfin_irq_flags); +} + +static inline unsigned long hard_local_save_flags(void) +{ + return bfin_read_IMASK(); +} -#define raw_local_irq_enable() \ - do { \ - barrier(); \ - ipipe_check_context(ipipe_root_domain); \ - __ipipe_unstall_root(); \ - } while (0) +static inline unsigned long __hard_local_irq_save(void) +{ + unsigned long flags; + flags = bfin_cli(); +#ifdef CONFIG_DEBUG_HWERR + bfin_sti(0x3f); +#endif + return flags; +} + +static inline int hard_irqs_disabled_flags(unsigned long flags) +{ + return (flags & ~0x3f) == 0; +} + +static inline int hard_irqs_disabled(void) +{ + unsigned long flags = hard_local_save_flags(); + return hard_irqs_disabled_flags(flags); +} + +static inline void __hard_local_irq_restore(unsigned long flags) +{ + if (!hard_irqs_disabled_flags(flags)) + __hard_local_irq_enable(); +} + +/*****************************************************************************/ +/* + * Interrupt pipe handling. + */ +#ifdef CONFIG_IPIPE + +#include <linux/compiler.h> +#include <linux/ipipe_base.h> +#include <linux/ipipe_trace.h> + +/* + * Interrupt pipe interface to linux/irqflags.h. + */ +static inline void arch_local_irq_disable(void) +{ + ipipe_check_context(ipipe_root_domain); + __ipipe_stall_root(); + barrier(); +} -#define raw_local_save_flags_ptr(x) \ - do { \ - *(x) = __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags; \ - } while (0) +static inline void arch_local_irq_enable(void) +{ + barrier(); + ipipe_check_context(ipipe_root_domain); + __ipipe_unstall_root(); +} -#define raw_local_save_flags(x) raw_local_save_flags_ptr(&(x)) +static inline unsigned long arch_local_save_flags(void) +{ + return __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags; +} -#define raw_irqs_disabled_flags(x) ((x) == bfin_no_irqs) +static inline int arch_irqs_disabled_flags(unsigned long flags) +{ + return flags == bfin_no_irqs; +} -#define raw_local_irq_save_ptr(x) \ - do { \ - *(x) = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags; \ - barrier(); \ - } while (0) +static inline void arch_local_irq_save_ptr(unsigned long *_flags) +{ + x = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags; + barrier(); +} -#define raw_local_irq_save(x) \ - do { \ - ipipe_check_context(ipipe_root_domain); \ - raw_local_irq_save_ptr(&(x)); \ - } while (0) +static inline unsigned long arch_local_irq_save(void) +{ + ipipe_check_context(ipipe_root_domain); + return __hard_local_irq_save(); +} -static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real) +static inline unsigned long arch_mangle_irq_bits(int virt, unsigned long real) { /* * Merge virtual and real interrupt mask bits into a single @@ -87,130 +143,79 @@ static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real) return (real & ~(1 << 31)) | ((virt != 0) << 31); } -static inline int raw_demangle_irq_bits(unsigned long *x) +static inline int arch_demangle_irq_bits(unsigned long *x) { int virt = (*x & (1 << 31)) != 0; *x &= ~(1L << 31); return virt; } -static inline void local_irq_disable_hw_notrace(void) +/* + * Interface to various arch routines that may be traced. + */ +#ifdef CONFIG_IPIPE_TRACE_IRQSOFF +static inline void hard_local_irq_disable(void) { - bfin_cli(); + if (!hard_irqs_disabled()) { + __hard_local_irq_disable(); + ipipe_trace_begin(0x80000000); + } } -static inline void local_irq_enable_hw_notrace(void) +static inline void hard_local_irq_enable(void) { - bfin_sti(bfin_irq_flags); + if (hard_irqs_disabled()) { + ipipe_trace_end(0x80000000); + __hard_local_irq_enable(); + } } -#define local_save_flags_hw(flags) \ - do { \ - (flags) = bfin_read_IMASK(); \ - } while (0) - -#define irqs_disabled_flags_hw(flags) (((flags) & ~0x3f) == 0) - -#define irqs_disabled_hw() \ - ({ \ - unsigned long flags; \ - local_save_flags_hw(flags); \ - irqs_disabled_flags_hw(flags); \ - }) - -static inline void local_irq_save_ptr_hw(unsigned long *flags) +static inline unsigned long hard_local_irq_save(void) { - *flags = bfin_cli(); -#ifdef CONFIG_DEBUG_HWERR - bfin_sti(0x3f); -#endif + unsigned long flags = hard_local_save_flags(); + if (!hard_irqs_disabled_flags(flags)) { + __hard_local_irq_disable(); + ipipe_trace_begin(0x80000001); + } + return flags; } -#define local_irq_save_hw_notrace(flags) \ - do { \ - local_irq_save_ptr_hw(&(flags)); \ - } while (0) - -static inline void local_irq_restore_hw_notrace(unsigned long flags) +static inline void hard_local_irq_restore(unsigned long flags) { - if (!irqs_disabled_flags_hw(flags)) - local_irq_enable_hw_notrace(); + if (!hard_irqs_disabled_flags(flags)) { + ipipe_trace_end(0x80000001); + __hard_local_irq_enable(); + } } -#ifdef CONFIG_IPIPE_TRACE_IRQSOFF -# define local_irq_disable_hw() \ - do { \ - if (!irqs_disabled_hw()) { \ - local_irq_disable_hw_notrace(); \ - ipipe_trace_begin(0x80000000); \ - } \ - } while (0) -# define local_irq_enable_hw() \ - do { \ - if (irqs_disabled_hw()) { \ - ipipe_trace_end(0x80000000); \ - local_irq_enable_hw_notrace(); \ - } \ - } while (0) -# define local_irq_save_hw(flags) \ - do { \ - local_save_flags_hw(flags); \ - if (!irqs_disabled_flags_hw(flags)) { \ - local_irq_disable_hw_notrace(); \ - ipipe_trace_begin(0x80000001); \ - } \ - } while (0) -# define local_irq_restore_hw(flags) \ - do { \ - if (!irqs_disabled_flags_hw(flags)) { \ - ipipe_trace_end(0x80000001); \ - local_irq_enable_hw_notrace(); \ - } \ - } while (0) #else /* !CONFIG_IPIPE_TRACE_IRQSOFF */ -# define local_irq_disable_hw() local_irq_disable_hw_notrace() -# define local_irq_enable_hw() local_irq_enable_hw_notrace() -# define local_irq_save_hw(flags) local_irq_save_hw_notrace(flags) -# define local_irq_restore_hw(flags) local_irq_restore_hw_notrace(flags) +# define hard_local_irq_disable() __hard_local_irq_disable() +# define hard_local_irq_enable() __hard_local_irq_enable() +# define hard_local_irq_save() __hard_local_irq_save() +# define hard_local_irq_restore(flags) __hard_local_irq_restore(flags) #endif /* !CONFIG_IPIPE_TRACE_IRQSOFF */ #else /* CONFIG_IPIPE */ -static inline void raw_local_irq_disable(void) -{ - bfin_cli(); -} -static inline void raw_local_irq_enable(void) -{ - bfin_sti(bfin_irq_flags); -} - -#define raw_local_save_flags(flags) do { (flags) = bfin_read_IMASK(); } while (0) - -#define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0) +/* + * Direct interface to linux/irqflags.h. + */ +#define arch_local_save_flags() hard_local_save_flags() +#define arch_local_irq_save(flags) __hard_local_irq_save() +#define arch_local_irq_restore(flags) __hard_local_irq_restore(flags) +#define arch_local_irq_enable() __hard_local_irq_enable() +#define arch_local_irq_disable() __hard_local_irq_disable() +#define arch_irqs_disabled_flags(flags) hard_irqs_disabled_flags(flags) +#define arch_irqs_disabled() hard_irqs_disabled() -static inline unsigned long __raw_local_irq_save(void) -{ - unsigned long flags = bfin_cli(); -#ifdef CONFIG_DEBUG_HWERR - bfin_sti(0x3f); -#endif - return flags; -} -#define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0) +/* + * Interface to various arch routines that may be traced. + */ +#define hard_local_irq_save() __hard_local_irq_save() +#define hard_local_irq_restore(flags) __hard_local_irq_restore(flags) +#define hard_local_irq_enable() __hard_local_irq_enable() +#define hard_local_irq_disable() __hard_local_irq_disable() -#define local_irq_save_hw(flags) raw_local_irq_save(flags) -#define local_irq_restore_hw(flags) raw_local_irq_restore(flags) -#define local_irq_enable_hw() raw_local_irq_enable() -#define local_irq_disable_hw() raw_local_irq_disable() -#define irqs_disabled_hw() irqs_disabled() #endif /* !CONFIG_IPIPE */ - -static inline void raw_local_irq_restore(unsigned long flags) -{ - if (!raw_irqs_disabled_flags(flags)) - raw_local_irq_enable(); -} - #endif diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h index e1a9b4624f91..3828c70e7a2e 100644 --- a/arch/blackfin/include/asm/mmu_context.h +++ b/arch/blackfin/include/asm/mmu_context.h @@ -97,8 +97,8 @@ static inline void __switch_mm(struct mm_struct *prev_mm, struct mm_struct *next } #ifdef CONFIG_IPIPE -#define lock_mm_switch(flags) local_irq_save_hw_cond(flags) -#define unlock_mm_switch(flags) local_irq_restore_hw_cond(flags) +#define lock_mm_switch(flags) flags = hard_local_irq_save_cond() +#define unlock_mm_switch(flags) hard_local_irq_restore_cond(flags) #else #define lock_mm_switch(flags) do { (void)(flags); } while (0) #define unlock_mm_switch(flags) do { (void)(flags); } while (0) @@ -205,9 +205,9 @@ static inline void destroy_context(struct mm_struct *mm) } #define ipipe_mm_switch_protect(flags) \ - local_irq_save_hw_cond(flags) + flags = hard_local_irq_save_cond() #define ipipe_mm_switch_unprotect(flags) \ - local_irq_restore_hw_cond(flags) + hard_local_irq_restore_cond(flags) #endif diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h index dde19b1d25f5..19e2c7c3e63a 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/system.h @@ -117,7 +117,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, unsigned long tmp = 0; unsigned long flags; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); switch (size) { case 1: @@ -139,7 +139,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); break; } - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return tmp; } diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index dc07ed08b37f..ca1c1f9debd6 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -349,13 +349,13 @@ inline void portmux_setup(unsigned short per) void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - local_irq_save_hw(flags); \ + flags = hard_local_irq_save(); \ if (arg) \ gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ else \ gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + hard_local_irq_restore(flags); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); @@ -371,14 +371,14 @@ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ if (ANOMALY_05000311 || ANOMALY_05000323) \ - local_irq_save_hw(flags); \ + flags = hard_local_irq_save(); \ if (arg) \ gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ else \ gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ if (ANOMALY_05000311 || ANOMALY_05000323) { \ AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + hard_local_irq_restore(flags); \ } \ } \ EXPORT_SYMBOL(set_gpio_ ## name); @@ -391,11 +391,11 @@ void set_gpio_toggle(unsigned gpio) { unsigned long flags; if (ANOMALY_05000311 || ANOMALY_05000323) - local_irq_save_hw(flags); + flags = hard_local_irq_save(); gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); if (ANOMALY_05000311 || ANOMALY_05000323) { AWA_DUMMY_READ(toggle); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } } EXPORT_SYMBOL(set_gpio_toggle); @@ -408,11 +408,11 @@ void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ if (ANOMALY_05000311 || ANOMALY_05000323) \ - local_irq_save_hw(flags); \ + flags = hard_local_irq_save(); \ gpio_array[gpio_bank(gpio)]->name = arg; \ if (ANOMALY_05000311 || ANOMALY_05000323) { \ AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + hard_local_irq_restore(flags); \ } \ } \ EXPORT_SYMBOL(set_gpiop_ ## name); @@ -433,11 +433,11 @@ unsigned short get_gpio_ ## name(unsigned gpio) \ unsigned long flags; \ unsigned short ret; \ if (ANOMALY_05000311 || ANOMALY_05000323) \ - local_irq_save_hw(flags); \ + flags = hard_local_irq_save(); \ ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ if (ANOMALY_05000311 || ANOMALY_05000323) { \ AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + hard_local_irq_restore(flags); \ } \ return ret; \ } \ @@ -460,11 +460,11 @@ unsigned short get_gpiop_ ## name(unsigned gpio) \ unsigned long flags; \ unsigned short ret; \ if (ANOMALY_05000311 || ANOMALY_05000323) \ - local_irq_save_hw(flags); \ + flags = hard_local_irq_save(); \ ret = (gpio_array[gpio_bank(gpio)]->name); \ if (ANOMALY_05000311 || ANOMALY_05000323) { \ AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + hard_local_irq_restore(flags); \ } \ return ret; \ } \ @@ -525,14 +525,14 @@ int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) if (check_gpio(gpio) < 0) return -EINVAL; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); if (ctrl) reserve(wakeup, gpio); else unreserve(wakeup, gpio); set_gpio_maskb(gpio, ctrl); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return 0; } @@ -690,7 +690,7 @@ int peripheral_request(unsigned short per, const char *label) BUG_ON(ident >= MAX_RESOURCES); - local_irq_save_hw(flags); + flags = hard_local_irq_save(); /* If a pin can be muxed as either GPIO or peripheral, make * sure it is not already a GPIO pin when we request it. @@ -701,7 +701,7 @@ int peripheral_request(unsigned short per, const char *label) printk(KERN_ERR "%s: Peripheral %d is already reserved as GPIO by %s !\n", __func__, ident, get_label(ident)); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return -EBUSY; } @@ -730,7 +730,7 @@ int peripheral_request(unsigned short per, const char *label) printk(KERN_ERR "%s: Peripheral %d function %d is already reserved by %s !\n", __func__, ident, P_FUNCT2MUX(per), get_label(ident)); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return -EBUSY; } } @@ -741,7 +741,7 @@ int peripheral_request(unsigned short per, const char *label) portmux_setup(per); port_setup(ident, PERIPHERAL_USAGE); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); set_label(ident, label); return 0; @@ -780,10 +780,10 @@ void peripheral_free(unsigned short per) if (!(per & P_DEFINED)) return; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); if (unlikely(!is_reserved(peri, ident, 0))) { - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return; } @@ -794,7 +794,7 @@ void peripheral_free(unsigned short per) set_label(ident, "free"); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } EXPORT_SYMBOL(peripheral_free); @@ -828,7 +828,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) if (check_gpio(gpio) < 0) return -EINVAL; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); /* * Allow that the identical GPIO can @@ -837,7 +837,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) */ if (cmp_label(gpio, label) == 0) { - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return 0; } @@ -846,7 +846,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) dump_stack(); printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", gpio, get_label(gpio)); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return -EBUSY; } if (unlikely(is_reserved(peri, gpio, 1))) { @@ -855,7 +855,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", gpio, get_label(gpio)); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return -EBUSY; } if (unlikely(is_reserved(gpio_irq, gpio, 1))) { @@ -871,7 +871,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) reserve(gpio, gpio); set_label(gpio, label); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); port_setup(gpio, GPIO_USAGE); @@ -888,13 +888,13 @@ void bfin_gpio_free(unsigned gpio) might_sleep(); - local_irq_save_hw(flags); + flags = hard_local_irq_save(); if (unlikely(!is_reserved(gpio, gpio, 0))) { if (system_state == SYSTEM_BOOTING) dump_stack(); gpio_error(gpio); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return; } @@ -902,7 +902,7 @@ void bfin_gpio_free(unsigned gpio) set_label(gpio, "free"); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } EXPORT_SYMBOL(bfin_gpio_free); @@ -913,7 +913,7 @@ int bfin_special_gpio_request(unsigned gpio, const char *label) { unsigned long flags; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); /* * Allow that the identical GPIO can @@ -922,19 +922,19 @@ int bfin_special_gpio_request(unsigned gpio, const char *label) */ if (cmp_label(gpio, label) == 0) { - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return 0; } if (unlikely(is_reserved(special_gpio, gpio, 1))) { - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", gpio, get_label(gpio)); return -EBUSY; } if (unlikely(is_reserved(peri, gpio, 1))) { - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", gpio, get_label(gpio)); @@ -946,7 +946,7 @@ int bfin_special_gpio_request(unsigned gpio, const char *label) reserve(peri, gpio); set_label(gpio, label); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); port_setup(gpio, GPIO_USAGE); return 0; @@ -959,18 +959,18 @@ void bfin_special_gpio_free(unsigned gpio) might_sleep(); - local_irq_save_hw(flags); + flags = hard_local_irq_save(); if (unlikely(!is_reserved(special_gpio, gpio, 0))) { gpio_error(gpio); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return; } unreserve(special_gpio, gpio); unreserve(peri, gpio); set_label(gpio, "free"); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } EXPORT_SYMBOL(bfin_special_gpio_free); #endif @@ -983,7 +983,7 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label) if (check_gpio(gpio) < 0) return -EINVAL; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); if (unlikely(is_reserved(peri, gpio, 1))) { if (system_state == SYSTEM_BOOTING) @@ -991,7 +991,7 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label) printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", gpio, get_label(gpio)); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return -EBUSY; } if (unlikely(is_reserved(gpio, gpio, 1))) @@ -1002,7 +1002,7 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label) reserve(gpio_irq, gpio); set_label(gpio, label); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); port_setup(gpio, GPIO_USAGE); @@ -1016,13 +1016,13 @@ void bfin_gpio_irq_free(unsigned gpio) if (check_gpio(gpio) < 0) return; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); if (unlikely(!is_reserved(gpio_irq, gpio, 0))) { if (system_state == SYSTEM_BOOTING) dump_stack(); gpio_error(gpio); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return; } @@ -1030,7 +1030,7 @@ void bfin_gpio_irq_free(unsigned gpio) set_label(gpio, "free"); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } static inline void __bfin_gpio_direction_input(unsigned gpio) @@ -1052,10 +1052,10 @@ int bfin_gpio_direction_input(unsigned gpio) return -EINVAL; } - local_irq_save_hw(flags); + flags = hard_local_irq_save(); __bfin_gpio_direction_input(gpio); AWA_DUMMY_READ(inen); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return 0; } @@ -1070,9 +1070,9 @@ void bfin_gpio_irq_prepare(unsigned gpio) port_setup(gpio, GPIO_USAGE); #ifdef CONFIG_BF54x - local_irq_save_hw(flags); + flags = hard_local_irq_save(); __bfin_gpio_direction_input(gpio); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); #endif } @@ -1094,7 +1094,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value) return -EINVAL; } - local_irq_save_hw(flags); + flags = hard_local_irq_save(); gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); gpio_set_value(gpio, value); @@ -1105,7 +1105,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value) #endif AWA_DUMMY_READ(dir); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return 0; } @@ -1120,11 +1120,11 @@ int bfin_gpio_get_value(unsigned gpio) if (unlikely(get_gpio_edge(gpio))) { int ret; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); set_gpio_edge(gpio, 0); ret = get_gpio_data(gpio); set_gpio_edge(gpio, 1); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return ret; } else return get_gpio_data(gpio); diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index 87b25b1b30ed..8de92299b3ee 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -318,7 +318,7 @@ void flush_switched_cplbs(unsigned int cpu) nr_cplb_flush[cpu]++; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); _disable_icplb(); for (i = first_switched_icplb; i < MAX_CPLBS; i++) { icplb_tbl[cpu][i].data = 0; @@ -332,7 +332,7 @@ void flush_switched_cplbs(unsigned int cpu) bfin_write32(DCPLB_DATA0 + i * 4, 0); } _enable_dcplb(); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } @@ -348,7 +348,7 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu) return; } - local_irq_save_hw(flags); + flags = hard_local_irq_save(); current_rwx_mask[cpu] = masks; if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) { @@ -373,5 +373,5 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu) addr += PAGE_SIZE; } _enable_dcplb(); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index 1a496cd71ba2..3b1da4aff2a1 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -219,10 +219,10 @@ int __ipipe_syscall_root(struct pt_regs *regs) ret = __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs); - local_irq_save_hw(flags); + flags = hard_local_irq_save(); if (!__ipipe_root_domain_p) { - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return 1; } @@ -230,7 +230,7 @@ int __ipipe_syscall_root(struct pt_regs *regs) if ((p->irqpend_himask & IPIPE_IRQMASK_VIRT) != 0) __ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return -ret; } @@ -239,14 +239,14 @@ unsigned long ipipe_critical_enter(void (*syncfn) (void)) { unsigned long flags; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); return flags; } void ipipe_critical_exit(unsigned long flags) { - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } static void __ipipe_no_irqtail(void) @@ -279,9 +279,9 @@ int ipipe_trigger_irq(unsigned irq) return -EINVAL; #endif - local_irq_save_hw(flags); + flags = hard_local_irq_save(); __ipipe_handle_irq(irq, NULL); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return 1; } @@ -293,7 +293,7 @@ asmlinkage void __ipipe_sync_root(void) BUG_ON(irqs_disabled()); - local_irq_save_hw(flags); + flags = hard_local_irq_save(); if (irq_tail_hook) irq_tail_hook(); @@ -303,7 +303,7 @@ asmlinkage void __ipipe_sync_root(void) if (ipipe_root_cpudom_var(irqpend_himask) != 0) __ipipe_sync_pipeline(IPIPE_IRQMASK_ANY); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } void ___ipipe_sync_pipeline(unsigned long syncmask) @@ -344,10 +344,10 @@ void __ipipe_stall_root(void) { unsigned long *p, flags; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); p = &__ipipe_root_status; __set_bit(IPIPE_STALL_FLAG, p); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } EXPORT_SYMBOL(__ipipe_stall_root); @@ -356,10 +356,10 @@ unsigned long __ipipe_test_and_stall_root(void) unsigned long *p, flags; int x; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); p = &__ipipe_root_status; x = __test_and_set_bit(IPIPE_STALL_FLAG, p); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return x; } @@ -371,10 +371,10 @@ unsigned long __ipipe_test_root(void) unsigned long flags; int x; - local_irq_save_hw_smp(flags); + flags = hard_local_irq_save_smp(); p = &__ipipe_root_status; x = test_bit(IPIPE_STALL_FLAG, p); - local_irq_restore_hw_smp(flags); + hard_local_irq_restore_smp(flags); return x; } @@ -384,10 +384,10 @@ void __ipipe_lock_root(void) { unsigned long *p, flags; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); p = &__ipipe_root_status; __set_bit(IPIPE_SYNCDEFER_FLAG, p); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } EXPORT_SYMBOL(__ipipe_lock_root); @@ -395,9 +395,9 @@ void __ipipe_unlock_root(void) { unsigned long *p, flags; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); p = &__ipipe_root_status; __clear_bit(IPIPE_SYNCDEFER_FLAG, p); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } EXPORT_SYMBOL(__ipipe_unlock_root); diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 01f98cb964d2..c86a3ed5f48f 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -65,11 +65,11 @@ static void default_idle(void) #ifdef CONFIG_IPIPE ipipe_suspend_domain(); #endif - local_irq_disable_hw(); + hard_local_irq_disable(); if (!need_resched()) idle_with_irq_disabled(); - local_irq_enable_hw(); + hard_local_irq_enable(); } /* diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c index 59fcdf6b0138..05b550891ce5 100644 --- a/arch/blackfin/kernel/trace.c +++ b/arch/blackfin/kernel/trace.c @@ -15,6 +15,7 @@ #include <linux/kallsyms.h> #include <linux/err.h> #include <linux/fs.h> +#include <linux/irq.h> #include <asm/dma.h> #include <asm/trace.h> #include <asm/fixed_code.h> diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h index e548e9d1d6fa..29498e59e71f 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h @@ -1058,54 +1058,4 @@ /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - local_irq_restore_hw(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - local_irq_restore_hw(flags); -} - #endif /* _CDEF_BF52X_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/pll.h b/arch/blackfin/mach-bf518/include/mach/pll.h new file mode 100644 index 000000000000..d5502988896b --- /dev/null +++ b/arch/blackfin/mach-bf518/include/mach/pll.h @@ -0,0 +1,63 @@ +/* + * Copyright 2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PLL_H +#define _MACH_PLL_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + hard_local_irq_restore(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + hard_local_irq_restore(flags); +} + +#endif /* _MACH_PLL_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h index 12f2ad45314e..11fb27bc427d 100644 --- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h @@ -1110,54 +1110,4 @@ /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - local_irq_restore_hw(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - local_irq_restore_hw(flags); -} - #endif /* _CDEF_BF52X_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/pll.h b/arch/blackfin/mach-bf527/include/mach/pll.h new file mode 100644 index 000000000000..24f1d7c02325 --- /dev/null +++ b/arch/blackfin/mach-bf527/include/mach/pll.h @@ -0,0 +1,63 @@ +/* + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PLL_H +#define _MACH_PLL_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + hard_local_irq_restore(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + hard_local_irq_restore(flags); +} + +#endif /* _MACH_PLL_H */ diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 842b4fa76ea9..84a06f677dff 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -25,6 +25,7 @@ #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> #include <asm/dpmc.h> +#include <mach/fio_flag.h> /* * Name the Board for the /proc/cpuinfo diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index 7349970db978..b8474cac6b03 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -22,6 +22,7 @@ #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> +#include <mach/fio_flag.h> /* * Name the Board for the /proc/cpuinfo diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index c457eaa60239..29c219eff2ff 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -24,6 +24,7 @@ #include <asm/reboot.h> #include <asm/portmux.h> #include <asm/dpmc.h> +#include <mach/fio_flag.h> /* * Name the Board for the /proc/cpuinfo diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h index feb2392c43ea..401e524f5321 100644 --- a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h @@ -7,11 +7,6 @@ #ifndef _CDEF_BF532_H #define _CDEF_BF532_H -#include <asm/blackfin.h> - -/*include all Core registers and bit definitions*/ -#include "defBF532.h" - /*include core specific register pointer definitions*/ #include <asm/cdef_LPBlackfin.h> @@ -655,90 +650,4 @@ /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> -#if ANOMALY_05000311 -#define BFIN_WRITE_FIO_FLAG(name) \ -static inline void bfin_write_FIO_FLAG_##name(unsigned short val) \ -{ \ - unsigned long flags; \ - local_irq_save_hw(flags); \ - bfin_write16(FIO_FLAG_##name, val); \ - bfin_read_CHIPID(); \ - local_irq_restore_hw(flags); \ -} -BFIN_WRITE_FIO_FLAG(D) -BFIN_WRITE_FIO_FLAG(C) -BFIN_WRITE_FIO_FLAG(S) -BFIN_WRITE_FIO_FLAG(T) - -#define BFIN_READ_FIO_FLAG(name) \ -static inline u16 bfin_read_FIO_FLAG_##name(void) \ -{ \ - unsigned long flags; \ - u16 ret; \ - local_irq_save_hw(flags); \ - ret = bfin_read16(FIO_FLAG_##name); \ - bfin_read_CHIPID(); \ - local_irq_restore_hw(flags); \ - return ret; \ -} -BFIN_READ_FIO_FLAG(D) -BFIN_READ_FIO_FLAG(C) -BFIN_READ_FIO_FLAG(S) -BFIN_READ_FIO_FLAG(T) - -#else -#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val) -#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val) -#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val) -#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val) -#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) -#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) -#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) -#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) -#endif - -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore_hw(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore_hw(flags); -} - #endif /* _CDEF_BF532_H */ diff --git a/arch/blackfin/mach-bf533/include/mach/fio_flag.h b/arch/blackfin/mach-bf533/include/mach/fio_flag.h new file mode 100644 index 000000000000..d0bfba0b083b --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/fio_flag.h @@ -0,0 +1,55 @@ +/* + * Copyright 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_FIO_FLAG_H +#define _MACH_FIO_FLAG_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +#if ANOMALY_05000311 +#define BFIN_WRITE_FIO_FLAG(name) \ +static inline void bfin_write_FIO_FLAG_##name(unsigned short val) \ +{ \ + unsigned long flags; \ + flags = hard_local_irq_save(); \ + bfin_write16(FIO_FLAG_##name, val); \ + bfin_read_CHIPID(); \ + hard_local_irq_restore(flags); \ +} +BFIN_WRITE_FIO_FLAG(D) +BFIN_WRITE_FIO_FLAG(C) +BFIN_WRITE_FIO_FLAG(S) +BFIN_WRITE_FIO_FLAG(T) + +#define BFIN_READ_FIO_FLAG(name) \ +static inline u16 bfin_read_FIO_FLAG_##name(void) \ +{ \ + unsigned long flags; \ + u16 ret; \ + flags = hard_local_irq_save(); \ + ret = bfin_read16(FIO_FLAG_##name); \ + bfin_read_CHIPID(); \ + hard_local_irq_restore(flags); \ + return ret; \ +} +BFIN_READ_FIO_FLAG(D) +BFIN_READ_FIO_FLAG(C) +BFIN_READ_FIO_FLAG(S) +BFIN_READ_FIO_FLAG(T) + +#else +#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val) +#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val) +#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val) +#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val) +#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) +#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) +#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) +#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) +#endif + +#endif /* _MACH_FIO_FLAG_H */ diff --git a/arch/blackfin/mach-bf533/include/mach/pll.h b/arch/blackfin/mach-bf533/include/mach/pll.h new file mode 100644 index 000000000000..169c106d0edb --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/pll.h @@ -0,0 +1,57 @@ +/* + * Copyright 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PLL_H +#define _MACH_PLL_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + hard_local_irq_restore(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_VR_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + hard_local_irq_restore(flags); +} + +#endif /* _MACH_PLL_H */ diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h index 91825c9bd226..fbeb35e14135 100644 --- a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h @@ -1750,48 +1750,4 @@ /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore_hw(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore_hw(flags); -} - #endif /* _CDEF_BF534_H */ diff --git a/arch/blackfin/mach-bf537/include/mach/pll.h b/arch/blackfin/mach-bf537/include/mach/pll.h new file mode 100644 index 000000000000..169c106d0edb --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/pll.h @@ -0,0 +1,57 @@ +/* + * Copyright 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PLL_H +#define _MACH_PLL_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + hard_local_irq_restore(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_VR_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + hard_local_irq_restore(flags); +} + +#endif /* _MACH_PLL_H */ diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h index 66aa722cf6c8..085b06b8c0a5 100644 --- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h +++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h @@ -2027,54 +2027,4 @@ /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - local_irq_restore_hw(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - local_irq_restore_hw(flags); -} - #endif diff --git a/arch/blackfin/mach-bf538/include/mach/pll.h b/arch/blackfin/mach-bf538/include/mach/pll.h new file mode 100644 index 000000000000..b30bbcd412a7 --- /dev/null +++ b/arch/blackfin/mach-bf538/include/mach/pll.h @@ -0,0 +1,63 @@ +/* + * Copyright 2008-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_PLL_H +#define _MACH_PLL_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + hard_local_irq_restore(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + hard_local_irq_restore(flags); +} + +#endif /* _MACH_PLL_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h index ea3ec4ea9e2b..0c16067df4f3 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h @@ -2648,61 +2648,5 @@ /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1, iwr2; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - iwr2 = bfin_read32(SIC_IWR2); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - bfin_write32(SIC_IWR2, 0); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - bfin_write32(SIC_IWR2, iwr2); - local_irq_restore_hw(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1, iwr2; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SIC_IWR0); - iwr1 = bfin_read32(SIC_IWR1); - iwr2 = bfin_read32(SIC_IWR2); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR0, IWR_ENABLE(0)); - bfin_write32(SIC_IWR1, 0); - bfin_write32(SIC_IWR2, 0); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR0, iwr0); - bfin_write32(SIC_IWR1, iwr1); - bfin_write32(SIC_IWR2, iwr2); - local_irq_restore_hw(flags); -} - #endif /* _CDEF_BF54X_H */ diff --git a/arch/blackfin/mach-bf548/include/mach/pll.h b/arch/blackfin/mach-bf548/include/mach/pll.h new file mode 100644 index 000000000000..7865a090d333 --- /dev/null +++ b/arch/blackfin/mach-bf548/include/mach/pll.h @@ -0,0 +1,69 @@ +/* + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_PLL_H +#define _MACH_PLL_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + hard_local_irq_restore(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_VR_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + hard_local_irq_restore(flags); +} + +#endif /* _MACH_PLL_H */ diff --git a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h index 81ecdb71c6af..cc0416a5fa02 100644 --- a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h @@ -1534,54 +1534,4 @@ /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SICA_IWR0); - iwr1 = bfin_read32(SICA_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SICA_IWR0, IWR_ENABLE(0)); - bfin_write32(SICA_IWR1, 0); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SICA_IWR0, iwr0); - bfin_write32(SICA_IWR1, iwr1); - local_irq_restore_hw(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr0, iwr1; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr0 = bfin_read32(SICA_IWR0); - iwr1 = bfin_read32(SICA_IWR1); - /* Only allow PPL Wakeup) */ - bfin_write32(SICA_IWR0, IWR_ENABLE(0)); - bfin_write32(SICA_IWR1, 0); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SICA_IWR0, iwr0); - bfin_write32(SICA_IWR1, iwr1); - local_irq_restore_hw(flags); -} - #endif /* _CDEF_BF561_H */ diff --git a/arch/blackfin/mach-bf561/include/mach/pll.h b/arch/blackfin/mach-bf561/include/mach/pll.h new file mode 100644 index 000000000000..f2b1fbdb8e72 --- /dev/null +++ b/arch/blackfin/mach-bf561/include/mach/pll.h @@ -0,0 +1,63 @@ +/* + * Copyright 2005-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_PLL_H +#define _MACH_PLL_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SICA_IWR0); + iwr1 = bfin_read32(SICA_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SICA_IWR0, IWR_ENABLE(0)); + bfin_write32(SICA_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SICA_IWR0, iwr0); + bfin_write32(SICA_IWR1, iwr1); + hard_local_irq_restore(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SICA_IWR0); + iwr1 = bfin_read32(SICA_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SICA_IWR0, IWR_ENABLE(0)); + bfin_write32(SICA_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SICA_IWR0, iwr0); + bfin_write32(SICA_IWR1, iwr1); + hard_local_irq_restore(flags); +} + +#endif /* _MACH_PLL_H */ diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index 4391d03dc845..f4cf11d362e1 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -134,7 +134,7 @@ static int bfin_target(struct cpufreq_policy *poli, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); if (cpu == CPUFREQ_CPU) { - local_irq_save_hw(flags); + flags = hard_local_irq_save(); plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel; bfin_write_PLL_DIV(plldiv); @@ -155,7 +155,7 @@ static int bfin_target(struct cpufreq_policy *poli, loops_per_jiffy = cpufreq_scale(lpj_ref, lpj_ref_freq, freqs.new); } - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } /* TODO: just test case for cycles clock source, remove later */ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 1c8c4c7245c3..eaece5f84e42 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -132,8 +132,8 @@ static void bfin_ack_noop(unsigned int irq) static void bfin_core_mask_irq(unsigned int irq) { bfin_irq_flags &= ~(1 << irq); - if (!irqs_disabled_hw()) - local_irq_enable_hw(); + if (!hard_irqs_disabled()) + hard_local_irq_enable(); } static void bfin_core_unmask_irq(unsigned int irq) @@ -148,8 +148,8 @@ static void bfin_core_unmask_irq(unsigned int irq) * local_irq_enable just does "STI bfin_irq_flags", so it's exactly * what we need. */ - if (!irqs_disabled_hw()) - local_irq_enable_hw(); + if (!hard_irqs_disabled()) + hard_local_irq_enable(); return; } @@ -158,12 +158,12 @@ static void bfin_internal_mask_irq(unsigned int irq) unsigned long flags; #ifdef CONFIG_BF53x - local_irq_save_hw(flags); + flags = hard_local_irq_save(); bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & ~(1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); mask_bank = SIC_SYSIRQ(irq) / 32; mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & @@ -173,7 +173,7 @@ static void bfin_internal_mask_irq(unsigned int irq) ~(1 << mask_bit)); #endif #endif - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } #ifdef CONFIG_SMP @@ -186,12 +186,12 @@ static void bfin_internal_unmask_irq(unsigned int irq) unsigned long flags; #ifdef CONFIG_BF53x - local_irq_save_hw(flags); + flags = hard_local_irq_save(); bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | (1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); mask_bank = SIC_SYSIRQ(irq) / 32; mask_bit = SIC_SYSIRQ(irq) % 32; #ifdef CONFIG_SMP @@ -207,7 +207,7 @@ static void bfin_internal_unmask_irq(unsigned int irq) (1 << mask_bit)); #endif #endif - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } #ifdef CONFIG_SMP @@ -264,7 +264,7 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state) break; } - local_irq_save_hw(flags); + flags = hard_local_irq_save(); if (state) { bfin_sic_iwr[bank] |= (1 << bit); @@ -275,7 +275,7 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state) vr_wakeup &= ~wakeup; } - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); return 0; } diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 09c1fb410748..80884b136a0c 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -25,7 +25,7 @@ void bfin_pm_suspend_standby_enter(void) { unsigned long flags; - local_irq_save_hw(flags); + flags = hard_local_irq_save(); bfin_pm_standby_setup(); #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER @@ -56,7 +56,7 @@ void bfin_pm_suspend_standby_enter(void) bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); } int bf53x_suspend_l1_mem(unsigned char *memptr) @@ -149,12 +149,12 @@ int bfin_pm_suspend_mem_enter(void) wakeup |= GPWE; #endif - local_irq_save_hw(flags); + flags = hard_local_irq_save(); ret = blackfin_dma_suspend(); if (ret) { - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); kfree(memptr); return ret; } @@ -178,7 +178,7 @@ int bfin_pm_suspend_mem_enter(void) bfin_gpio_pm_hibernate_restore(); blackfin_dma_resume(); - local_irq_restore_hw(flags); + hard_local_irq_restore(flags); kfree(memptr); return 0; diff --git a/arch/cris/include/arch-v10/arch/irqflags.h b/arch/cris/include/arch-v10/arch/irqflags.h new file mode 100644 index 000000000000..75ef18991240 --- /dev/null +++ b/arch/cris/include/arch-v10/arch/irqflags.h @@ -0,0 +1,45 @@ +#ifndef __ASM_CRIS_ARCH_IRQFLAGS_H +#define __ASM_CRIS_ARCH_IRQFLAGS_H + +#include <linux/types.h> + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + asm volatile("move $ccr,%0" : "=rm" (flags) : : "memory"); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ + asm volatile("di" : : : "memory"); +} + +static inline void arch_local_irq_enable(void) +{ + asm volatile("ei" : : : "memory"); +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags = arch_local_save_flags(); + arch_local_irq_disable(); + return flags; +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile("move %0,$ccr" : : "rm" (flags) : "memory"); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return !(flags & (1 << 5)); +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#endif /* __ASM_CRIS_ARCH_IRQFLAGS_H */ diff --git a/arch/cris/include/arch-v10/arch/system.h b/arch/cris/include/arch-v10/arch/system.h index 4a9cd36c9e16..935fde34aa15 100644 --- a/arch/cris/include/arch-v10/arch/system.h +++ b/arch/cris/include/arch-v10/arch/system.h @@ -44,20 +44,4 @@ static inline unsigned long _get_base(char * addr) struct __xchg_dummy { unsigned long a[100]; }; #define __xg(x) ((struct __xchg_dummy *)(x)) -/* interrupt control.. */ -#define local_save_flags(x) __asm__ __volatile__ ("move $ccr,%0" : "=rm" (x) : : "memory"); -#define local_irq_restore(x) __asm__ __volatile__ ("move %0,$ccr" : : "rm" (x) : "memory"); -#define local_irq_disable() __asm__ __volatile__ ( "di" : : :"memory"); -#define local_irq_enable() __asm__ __volatile__ ( "ei" : : :"memory"); - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - !(flags & (1<<5)); \ -}) - -/* For spinlocks etc */ -#define local_irq_save(x) __asm__ __volatile__ ("move $ccr,%0\n\tdi" : "=rm" (x) : : "memory"); - #endif diff --git a/arch/cris/include/arch-v32/arch/irqflags.h b/arch/cris/include/arch-v32/arch/irqflags.h new file mode 100644 index 000000000000..041851f8ec6f --- /dev/null +++ b/arch/cris/include/arch-v32/arch/irqflags.h @@ -0,0 +1,46 @@ +#ifndef __ASM_CRIS_ARCH_IRQFLAGS_H +#define __ASM_CRIS_ARCH_IRQFLAGS_H + +#include <linux/types.h> +#include <arch/ptrace.h> + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + asm volatile("move $ccs,%0" : "=rm" (flags) : : "memory"); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ + asm volatile("di" : : : "memory"); +} + +static inline void arch_local_irq_enable(void) +{ + asm volatile("ei" : : : "memory"); +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags = arch_local_save_flags(); + arch_local_irq_disable(); + return flags; +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile("move %0,$ccs" : : "rm" (flags) : "memory"); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return !(flags & (1 << I_CCS_BITNR)); +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#endif /* __ASM_CRIS_ARCH_IRQFLAGS_H */ diff --git a/arch/cris/include/arch-v32/arch/system.h b/arch/cris/include/arch-v32/arch/system.h index 6ca90f1f110a..76cea99eaa60 100644 --- a/arch/cris/include/arch-v32/arch/system.h +++ b/arch/cris/include/arch-v32/arch/system.h @@ -44,26 +44,4 @@ static inline unsigned long rdsp(void) struct __xchg_dummy { unsigned long a[100]; }; #define __xg(x) ((struct __xchg_dummy *)(x)) -/* Used for interrupt control. */ -#define local_save_flags(x) \ - __asm__ __volatile__ ("move $ccs, %0" : "=rm" (x) : : "memory"); - -#define local_irq_restore(x) \ - __asm__ __volatile__ ("move %0, $ccs" : : "rm" (x) : "memory"); - -#define local_irq_disable() __asm__ __volatile__ ("di" : : : "memory"); -#define local_irq_enable() __asm__ __volatile__ ("ei" : : : "memory"); - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - \ - local_save_flags(flags);\ - !(flags & (1 << I_CCS_BITNR)); \ -}) - -/* Used for spinlocks, etc. */ -#define local_irq_save(x) \ - __asm__ __volatile__ ("move $ccs, %0\n\tdi" : "=rm" (x) : : "memory"); - #endif /* _ASM_CRIS_ARCH_SYSTEM_H */ diff --git a/arch/cris/include/asm/irqflags.h b/arch/cris/include/asm/irqflags.h new file mode 100644 index 000000000000..943ba5ca6d2c --- /dev/null +++ b/arch/cris/include/asm/irqflags.h @@ -0,0 +1 @@ +#include <arch/irqflags.h> diff --git a/arch/cris/include/asm/system.h b/arch/cris/include/asm/system.h index 8657b084a922..ea10592f7d75 100644 --- a/arch/cris/include/asm/system.h +++ b/arch/cris/include/asm/system.h @@ -1,6 +1,7 @@ #ifndef __ASM_CRIS_SYSTEM_H #define __ASM_CRIS_SYSTEM_H +#include <linux/irqflags.h> #include <arch/system.h> /* the switch_to macro calls resume, an asm function in entry.S which does the actual diff --git a/arch/frv/include/asm/irqflags.h b/arch/frv/include/asm/irqflags.h new file mode 100644 index 000000000000..82f0b5363f42 --- /dev/null +++ b/arch/frv/include/asm/irqflags.h @@ -0,0 +1,158 @@ +/* FR-V interrupt handling + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +/* + * interrupt flag manipulation + * - use virtual interrupt management since touching the PSR is slow + * - ICC2.Z: T if interrupts virtually disabled + * - ICC2.C: F if interrupts really disabled + * - if Z==1 upon interrupt: + * - C is set to 0 + * - interrupts are really disabled + * - entry.S returns immediately + * - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts + * - if taken, the trap: + * - sets ICC2.C + * - enables interrupts + */ +static inline void arch_local_irq_disable(void) +{ + /* set Z flag, but don't change the C flag */ + asm volatile(" andcc gr0,gr0,gr0,icc2 \n" + : + : + : "memory", "icc2" + ); +} + +static inline void arch_local_irq_enable(void) +{ + /* clear Z flag and then test the C flag */ + asm volatile(" oricc gr0,#1,gr0,icc2 \n" + " tihi icc2,gr0,#2 \n" + : + : + : "memory", "icc2" + ); +} + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + + asm volatile("movsg ccr,%0" + : "=r"(flags) + : + : "memory"); + + /* shift ICC2.Z to bit 0 */ + flags >>= 26; + + /* make flags 1 if interrupts disabled, 0 otherwise */ + return flags & 1UL; + +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags = arch_local_save_flags(); + arch_local_irq_disable(); + return flags; +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + /* load the Z flag by turning 1 if disabled into 0 if disabled + * and thus setting the Z flag but not the C flag */ + asm volatile(" xoricc %0,#1,gr0,icc2 \n" + /* then trap if Z=0 and C=0 */ + " tihi icc2,gr0,#2 \n" + : + : "r"(flags) + : "memory", "icc2" + ); + +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return flags; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +/* + * real interrupt flag manipulation + */ +#define __arch_local_irq_disable() \ +do { \ + unsigned long psr; \ + asm volatile(" movsg psr,%0 \n" \ + " andi %0,%2,%0 \n" \ + " ori %0,%1,%0 \n" \ + " movgs %0,psr \n" \ + : "=r"(psr) \ + : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ + : "memory"); \ +} while (0) + +#define __arch_local_irq_enable() \ +do { \ + unsigned long psr; \ + asm volatile(" movsg psr,%0 \n" \ + " andi %0,%1,%0 \n" \ + " movgs %0,psr \n" \ + : "=r"(psr) \ + : "i" (~PSR_PIL) \ + : "memory"); \ +} while (0) + +#define __arch_local_save_flags(flags) \ +do { \ + typecheck(unsigned long, flags); \ + asm("movsg psr,%0" \ + : "=r"(flags) \ + : \ + : "memory"); \ +} while (0) + +#define __arch_local_irq_save(flags) \ +do { \ + unsigned long npsr; \ + typecheck(unsigned long, flags); \ + asm volatile(" movsg psr,%0 \n" \ + " andi %0,%3,%1 \n" \ + " ori %1,%2,%1 \n" \ + " movgs %1,psr \n" \ + : "=r"(flags), "=r"(npsr) \ + : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ + : "memory"); \ +} while (0) + +#define __arch_local_irq_restore(flags) \ +do { \ + typecheck(unsigned long, flags); \ + asm volatile(" movgs %0,psr \n" \ + : \ + : "r" (flags) \ + : "memory"); \ +} while (0) + +#define __arch_irqs_disabled() \ + ((__get_PSR() & PSR_PIL) >= PSR_PIL_14) + +#endif /* _ASM_IRQFLAGS_H */ diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h index efd22d9077ac..0a6d8d9ca45b 100644 --- a/arch/frv/include/asm/system.h +++ b/arch/frv/include/asm/system.h @@ -37,142 +37,6 @@ do { \ } while(0) /* - * interrupt flag manipulation - * - use virtual interrupt management since touching the PSR is slow - * - ICC2.Z: T if interrupts virtually disabled - * - ICC2.C: F if interrupts really disabled - * - if Z==1 upon interrupt: - * - C is set to 0 - * - interrupts are really disabled - * - entry.S returns immediately - * - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts - * - if taken, the trap: - * - sets ICC2.C - * - enables interrupts - */ -#define local_irq_disable() \ -do { \ - /* set Z flag, but don't change the C flag */ \ - asm volatile(" andcc gr0,gr0,gr0,icc2 \n" \ - : \ - : \ - : "memory", "icc2" \ - ); \ -} while(0) - -#define local_irq_enable() \ -do { \ - /* clear Z flag and then test the C flag */ \ - asm volatile(" oricc gr0,#1,gr0,icc2 \n" \ - " tihi icc2,gr0,#2 \n" \ - : \ - : \ - : "memory", "icc2" \ - ); \ -} while(0) - -#define local_save_flags(flags) \ -do { \ - typecheck(unsigned long, flags); \ - asm volatile("movsg ccr,%0" \ - : "=r"(flags) \ - : \ - : "memory"); \ - \ - /* shift ICC2.Z to bit 0 */ \ - flags >>= 26; \ - \ - /* make flags 1 if interrupts disabled, 0 otherwise */ \ - flags &= 1UL; \ -} while(0) - -#define irqs_disabled() \ - ({unsigned long flags; local_save_flags(flags); !!flags; }) - -#define local_irq_save(flags) \ -do { \ - typecheck(unsigned long, flags); \ - local_save_flags(flags); \ - local_irq_disable(); \ -} while(0) - -#define local_irq_restore(flags) \ -do { \ - typecheck(unsigned long, flags); \ - \ - /* load the Z flag by turning 1 if disabled into 0 if disabled \ - * and thus setting the Z flag but not the C flag */ \ - asm volatile(" xoricc %0,#1,gr0,icc2 \n" \ - /* then test Z=0 and C=0 */ \ - " tihi icc2,gr0,#2 \n" \ - : \ - : "r"(flags) \ - : "memory", "icc2" \ - ); \ - \ -} while(0) - -/* - * real interrupt flag manipulation - */ -#define __local_irq_disable() \ -do { \ - unsigned long psr; \ - asm volatile(" movsg psr,%0 \n" \ - " andi %0,%2,%0 \n" \ - " ori %0,%1,%0 \n" \ - " movgs %0,psr \n" \ - : "=r"(psr) \ - : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ - : "memory"); \ -} while(0) - -#define __local_irq_enable() \ -do { \ - unsigned long psr; \ - asm volatile(" movsg psr,%0 \n" \ - " andi %0,%1,%0 \n" \ - " movgs %0,psr \n" \ - : "=r"(psr) \ - : "i" (~PSR_PIL) \ - : "memory"); \ -} while(0) - -#define __local_save_flags(flags) \ -do { \ - typecheck(unsigned long, flags); \ - asm("movsg psr,%0" \ - : "=r"(flags) \ - : \ - : "memory"); \ -} while(0) - -#define __local_irq_save(flags) \ -do { \ - unsigned long npsr; \ - typecheck(unsigned long, flags); \ - asm volatile(" movsg psr,%0 \n" \ - " andi %0,%3,%1 \n" \ - " ori %1,%2,%1 \n" \ - " movgs %1,psr \n" \ - : "=r"(flags), "=r"(npsr) \ - : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ - : "memory"); \ -} while(0) - -#define __local_irq_restore(flags) \ -do { \ - typecheck(unsigned long, flags); \ - asm volatile(" movgs %0,psr \n" \ - : \ - : "r" (flags) \ - : "memory"); \ -} while(0) - -#define __irqs_disabled() \ - ((__get_PSR() & PSR_PIL) >= PSR_PIL_14) - -/* * Force strict CPU ordering. */ #define nop() asm volatile ("nop"::) diff --git a/arch/h8300/include/asm/irqflags.h b/arch/h8300/include/asm/irqflags.h new file mode 100644 index 000000000000..9617cd57aebd --- /dev/null +++ b/arch/h8300/include/asm/irqflags.h @@ -0,0 +1,43 @@ +#ifndef _H8300_IRQFLAGS_H +#define _H8300_IRQFLAGS_H + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + asm volatile ("stc ccr,%w0" : "=r" (flags)); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ + asm volatile ("orc #0x80,ccr" : : : "memory"); +} + +static inline void arch_local_irq_enable(void) +{ + asm volatile ("andc #0x7f,ccr" : : : "memory"); +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags = arch_local_save_flags(); + arch_local_irq_disable(); + return flags; +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile ("ldc %w0,ccr" : : "r" (flags) : "memory"); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return (flags & 0x80) == 0x80; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#endif /* _H8300_IRQFLAGS_H */ diff --git a/arch/h8300/include/asm/system.h b/arch/h8300/include/asm/system.h index 16bf1560ff68..2c2382e50d93 100644 --- a/arch/h8300/include/asm/system.h +++ b/arch/h8300/include/asm/system.h @@ -2,6 +2,7 @@ #define _H8300_SYSTEM_H #include <linux/linkage.h> +#include <linux/irqflags.h> struct pt_regs; @@ -51,31 +52,8 @@ asmlinkage void resume(void); (last) = _last; \ } -#define __sti() asm volatile ("andc #0x7f,ccr") -#define __cli() asm volatile ("orc #0x80,ccr") - -#define __save_flags(x) \ - asm volatile ("stc ccr,%w0":"=r" (x)) - -#define __restore_flags(x) \ - asm volatile ("ldc %w0,ccr": :"r" (x)) - -#define irqs_disabled() \ -({ \ - unsigned char flags; \ - __save_flags(flags); \ - ((flags & 0x80) == 0x80); \ -}) - #define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc") -/* For spinlocks etc */ -#define local_irq_disable() __cli() -#define local_irq_enable() __sti() -#define local_irq_save(x) ({ __save_flags(x); local_irq_disable(); }) -#define local_irq_restore(x) __restore_flags(x) -#define local_save_flags(x) __save_flags(x) - /* * Force strict CPU ordering. * Not really required on H8... diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index ba22849ee3ec..7c82fa1fc911 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -53,6 +53,9 @@ config MMU bool default y +config ARCH_DMA_ADDR_T_64BIT + def_bool y + config NEED_DMA_MAP_STATE def_bool y @@ -62,6 +65,9 @@ config NEED_SG_DMA_LENGTH config SWIOTLB bool +config STACKTRACE_SUPPORT + def_bool y + config GENERIC_LOCKBREAK def_bool n @@ -683,8 +689,10 @@ source "lib/Kconfig" # Use the generic interrupt handling code in kernel/irq/: # config GENERIC_HARDIRQS - bool - default y + def_bool y + +config GENERIC_HARDIRQS_NO__DO_IRQ + def_bool y config GENERIC_IRQ_PROBE bool diff --git a/arch/ia64/include/asm/compat.h b/arch/ia64/include/asm/compat.h deleted file mode 100644 index 9301a2821615..000000000000 --- a/arch/ia64/include/asm/compat.h +++ /dev/null @@ -1,208 +0,0 @@ -#ifndef _ASM_IA64_COMPAT_H -#define _ASM_IA64_COMPAT_H -/* - * Architecture specific compatibility types - */ -#include <linux/types.h> - -#define COMPAT_USER_HZ 100 -#define COMPAT_UTS_MACHINE "i686\0\0\0" - -typedef u32 compat_size_t; -typedef s32 compat_ssize_t; -typedef s32 compat_time_t; -typedef s32 compat_clock_t; -typedef s32 compat_key_t; -typedef s32 compat_pid_t; -typedef u16 __compat_uid_t; -typedef u16 __compat_gid_t; -typedef u32 __compat_uid32_t; -typedef u32 __compat_gid32_t; -typedef u16 compat_mode_t; -typedef u32 compat_ino_t; -typedef u16 compat_dev_t; -typedef s32 compat_off_t; -typedef s64 compat_loff_t; -typedef u16 compat_nlink_t; -typedef u16 compat_ipc_pid_t; -typedef s32 compat_daddr_t; -typedef u32 compat_caddr_t; -typedef __kernel_fsid_t compat_fsid_t; -typedef s32 compat_timer_t; - -typedef s32 compat_int_t; -typedef s32 compat_long_t; -typedef s64 __attribute__((aligned(4))) compat_s64; -typedef u32 compat_uint_t; -typedef u32 compat_ulong_t; -typedef u64 __attribute__((aligned(4))) compat_u64; - -struct compat_timespec { - compat_time_t tv_sec; - s32 tv_nsec; -}; - -struct compat_timeval { - compat_time_t tv_sec; - s32 tv_usec; -}; - -struct compat_stat { - compat_dev_t st_dev; - u16 __pad1; - compat_ino_t st_ino; - compat_mode_t st_mode; - compat_nlink_t st_nlink; - __compat_uid_t st_uid; - __compat_gid_t st_gid; - compat_dev_t st_rdev; - u16 __pad2; - u32 st_size; - u32 st_blksize; - u32 st_blocks; - u32 st_atime; - u32 st_atime_nsec; - u32 st_mtime; - u32 st_mtime_nsec; - u32 st_ctime; - u32 st_ctime_nsec; - u32 __unused4; - u32 __unused5; -}; - -struct compat_flock { - short l_type; - short l_whence; - compat_off_t l_start; - compat_off_t l_len; - compat_pid_t l_pid; -}; - -#define F_GETLK64 12 -#define F_SETLK64 13 -#define F_SETLKW64 14 - -/* - * IA32 uses 4 byte alignment for 64 bit quantities, - * so we need to pack this structure. - */ -struct compat_flock64 { - short l_type; - short l_whence; - compat_loff_t l_start; - compat_loff_t l_len; - compat_pid_t l_pid; -} __attribute__((packed)); - -struct compat_statfs { - int f_type; - int f_bsize; - int f_blocks; - int f_bfree; - int f_bavail; - int f_files; - int f_ffree; - compat_fsid_t f_fsid; - int f_namelen; /* SunOS ignores this field. */ - int f_frsize; - int f_spare[5]; -}; - -#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff -#define COMPAT_RLIM_INFINITY 0xffffffff - -typedef u32 compat_old_sigset_t; /* at least 32 bits */ - -#define _COMPAT_NSIG 64 -#define _COMPAT_NSIG_BPW 32 - -typedef u32 compat_sigset_word; - -#define COMPAT_OFF_T_MAX 0x7fffffff -#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL - -struct compat_ipc64_perm { - compat_key_t key; - __compat_uid32_t uid; - __compat_gid32_t gid; - __compat_uid32_t cuid; - __compat_gid32_t cgid; - unsigned short mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - compat_ulong_t unused1; - compat_ulong_t unused2; -}; - -struct compat_semid64_ds { - struct compat_ipc64_perm sem_perm; - compat_time_t sem_otime; - compat_ulong_t __unused1; - compat_time_t sem_ctime; - compat_ulong_t __unused2; - compat_ulong_t sem_nsems; - compat_ulong_t __unused3; - compat_ulong_t __unused4; -}; - -struct compat_msqid64_ds { - struct compat_ipc64_perm msg_perm; - compat_time_t msg_stime; - compat_ulong_t __unused1; - compat_time_t msg_rtime; - compat_ulong_t __unused2; - compat_time_t msg_ctime; - compat_ulong_t __unused3; - compat_ulong_t msg_cbytes; - compat_ulong_t msg_qnum; - compat_ulong_t msg_qbytes; - compat_pid_t msg_lspid; - compat_pid_t msg_lrpid; - compat_ulong_t __unused4; - compat_ulong_t __unused5; -}; - -struct compat_shmid64_ds { - struct compat_ipc64_perm shm_perm; - compat_size_t shm_segsz; - compat_time_t shm_atime; - compat_ulong_t __unused1; - compat_time_t shm_dtime; - compat_ulong_t __unused2; - compat_time_t shm_ctime; - compat_ulong_t __unused3; - compat_pid_t shm_cpid; - compat_pid_t shm_lpid; - compat_ulong_t shm_nattch; - compat_ulong_t __unused4; - compat_ulong_t __unused5; -}; - -/* - * A pointer passed in from user mode. This should not be used for syscall parameters, - * just declare them as pointers because the syscall entry code will have appropriately - * converted them already. - */ -typedef u32 compat_uptr_t; - -static inline void __user * -compat_ptr (compat_uptr_t uptr) -{ - return (void __user *) (unsigned long) uptr; -} - -static inline compat_uptr_t -ptr_to_compat(void __user *uptr) -{ - return (u32)(unsigned long)uptr; -} - -static __inline__ void __user * -arch_compat_alloc_user_space (long len) -{ - struct pt_regs *regs = task_pt_regs(current); - return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len); -} - -#endif /* _ASM_IA64_COMPAT_H */ diff --git a/arch/ia64/include/asm/iommu_table.h b/arch/ia64/include/asm/iommu_table.h new file mode 100644 index 000000000000..92c8d36ae5ae --- /dev/null +++ b/arch/ia64/include/asm/iommu_table.h @@ -0,0 +1,6 @@ +#ifndef _ASM_IA64_IOMMU_TABLE_H +#define _ASM_IA64_IOMMU_TABLE_H + +#define IOMMU_INIT_POST(_detect) + +#endif /* _ASM_IA64_IOMMU_TABLE_H */ diff --git a/arch/ia64/include/asm/irqflags.h b/arch/ia64/include/asm/irqflags.h new file mode 100644 index 000000000000..f82d6be2ecd2 --- /dev/null +++ b/arch/ia64/include/asm/irqflags.h @@ -0,0 +1,94 @@ +/* + * IRQ flags defines. + * + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com> + * Copyright (C) 1999 Don Dugger <don.dugger@intel.com> + */ + +#ifndef _ASM_IA64_IRQFLAGS_H +#define _ASM_IA64_IRQFLAGS_H + +#ifdef CONFIG_IA64_DEBUG_IRQ +extern unsigned long last_cli_ip; +static inline void arch_maybe_save_ip(unsigned long flags) +{ + if (flags & IA64_PSR_I) + last_cli_ip = ia64_getreg(_IA64_REG_IP); +} +#else +#define arch_maybe_save_ip(flags) do {} while (0) +#endif + +/* + * - clearing psr.i is implicitly serialized (visible by next insn) + * - setting psr.i requires data serialization + * - we need a stop-bit before reading PSR because we sometimes + * write a floating-point register right before reading the PSR + * and that writes to PSR.mfl + */ + +static inline unsigned long arch_local_save_flags(void) +{ + ia64_stop(); +#ifdef CONFIG_PARAVIRT + return ia64_get_psr_i(); +#else + return ia64_getreg(_IA64_REG_PSR); +#endif +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags = arch_local_save_flags(); + + ia64_stop(); + ia64_rsm(IA64_PSR_I); + arch_maybe_save_ip(flags); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ +#ifdef CONFIG_IA64_DEBUG_IRQ + arch_local_irq_save(); +#else + ia64_stop(); + ia64_rsm(IA64_PSR_I); +#endif +} + +static inline void arch_local_irq_enable(void) +{ + ia64_stop(); + ia64_ssm(IA64_PSR_I); + ia64_srlz_d(); +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ +#ifdef CONFIG_IA64_DEBUG_IRQ + unsigned long old_psr = arch_local_save_flags(); +#endif + ia64_intrin_local_irq_restore(flags & IA64_PSR_I); + arch_maybe_save_ip(old_psr & ~flags); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return (flags & IA64_PSR_I) == 0; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +static inline void arch_safe_halt(void) +{ + ia64_pal_halt_light(); /* PAL_HALT_LIGHT */ +} + + +#endif /* _ASM_IA64_IRQFLAGS_H */ diff --git a/arch/ia64/include/asm/system.h b/arch/ia64/include/asm/system.h index dd028f2b13b3..6cca30705d50 100644 --- a/arch/ia64/include/asm/system.h +++ b/arch/ia64/include/asm/system.h @@ -107,87 +107,11 @@ extern struct ia64_boot_param { */ #define set_mb(var, value) do { (var) = (value); mb(); } while (0) -#define safe_halt() ia64_pal_halt_light() /* PAL_HALT_LIGHT */ - /* * The group barrier in front of the rsm & ssm are necessary to ensure * that none of the previous instructions in the same group are * affected by the rsm/ssm. */ -/* For spinlocks etc */ - -/* - * - clearing psr.i is implicitly serialized (visible by next insn) - * - setting psr.i requires data serialization - * - we need a stop-bit before reading PSR because we sometimes - * write a floating-point register right before reading the PSR - * and that writes to PSR.mfl - */ -#ifdef CONFIG_PARAVIRT -#define __local_save_flags() ia64_get_psr_i() -#else -#define __local_save_flags() ia64_getreg(_IA64_REG_PSR) -#endif - -#define __local_irq_save(x) \ -do { \ - ia64_stop(); \ - (x) = __local_save_flags(); \ - ia64_stop(); \ - ia64_rsm(IA64_PSR_I); \ -} while (0) - -#define __local_irq_disable() \ -do { \ - ia64_stop(); \ - ia64_rsm(IA64_PSR_I); \ -} while (0) - -#define __local_irq_restore(x) ia64_intrin_local_irq_restore((x) & IA64_PSR_I) - -#ifdef CONFIG_IA64_DEBUG_IRQ - - extern unsigned long last_cli_ip; - -# define __save_ip() last_cli_ip = ia64_getreg(_IA64_REG_IP) - -# define local_irq_save(x) \ -do { \ - unsigned long __psr; \ - \ - __local_irq_save(__psr); \ - if (__psr & IA64_PSR_I) \ - __save_ip(); \ - (x) = __psr; \ -} while (0) - -# define local_irq_disable() do { unsigned long __x; local_irq_save(__x); } while (0) - -# define local_irq_restore(x) \ -do { \ - unsigned long __old_psr, __psr = (x); \ - \ - local_save_flags(__old_psr); \ - __local_irq_restore(__psr); \ - if ((__old_psr & IA64_PSR_I) && !(__psr & IA64_PSR_I)) \ - __save_ip(); \ -} while (0) - -#else /* !CONFIG_IA64_DEBUG_IRQ */ -# define local_irq_save(x) __local_irq_save(x) -# define local_irq_disable() __local_irq_disable() -# define local_irq_restore(x) __local_irq_restore(x) -#endif /* !CONFIG_IA64_DEBUG_IRQ */ - -#define local_irq_enable() ({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); }) -#define local_save_flags(flags) ({ ia64_stop(); (flags) = __local_save_flags(); }) - -#define irqs_disabled() \ -({ \ - unsigned long __ia64_id_flags; \ - local_save_flags(__ia64_id_flags); \ - (__ia64_id_flags & IA64_PSR_I) == 0; \ -}) #ifdef __KERNEL__ diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index db10b1e378b0..395c2f216dd8 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_AUDIT) += audit.o obj-$(CONFIG_PCI_MSI) += msi_ia64.o mca_recovery-y += mca_drv.o mca_drv_asm.o obj-$(CONFIG_IA64_MC_ERR_INJECT)+= err_inject.o +obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_PARAVIRT) += paravirt.o paravirtentry.o \ paravirt_patch.o diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c index 71e35864d2e2..d52f1f78eff2 100644 --- a/arch/ia64/kernel/cyclone.c +++ b/arch/ia64/kernel/cyclone.c @@ -59,13 +59,13 @@ int __init init_cyclone_clock(void) return -ENODEV; } base = readq(reg); + iounmap(reg); if(!base){ printk(KERN_ERR "Summit chipset: Could not find valid CBAR" " value.\n"); use_cyclone = 0; return -ENODEV; } - iounmap(reg); /* setup PMCC */ offset = (base + CYCLONE_PMCC_OFFSET); diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 7ded76658d2d..22c38404f539 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -108,10 +108,6 @@ #define DBG(fmt...) #endif -#define NR_PREALLOCATE_RTE_ENTRIES \ - (PAGE_SIZE / sizeof(struct iosapic_rte_info)) -#define RTE_PREALLOCATED (1) - static DEFINE_SPINLOCK(iosapic_lock); /* @@ -136,7 +132,6 @@ struct iosapic_rte_info { struct list_head rte_list; /* RTEs sharing the same vector */ char rte_index; /* IOSAPIC RTE index */ int refcnt; /* reference counter */ - unsigned int flags; /* flags */ struct iosapic *iosapic; } ____cacheline_aligned; @@ -155,9 +150,6 @@ static struct iosapic_intr_info { static unsigned char pcat_compat __devinitdata; /* 8259 compatibility flag */ -static int iosapic_kmalloc_ok; -static LIST_HEAD(free_rte_list); - static inline void iosapic_write(struct iosapic *iosapic, unsigned int reg, u32 val) { @@ -394,7 +386,7 @@ iosapic_startup_level_irq (unsigned int irq) } static void -iosapic_end_level_irq (unsigned int irq) +iosapic_unmask_level_irq (unsigned int irq) { ia64_vector vec = irq_to_vector(irq); struct iosapic_rte_info *rte; @@ -404,7 +396,8 @@ iosapic_end_level_irq (unsigned int irq) if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) { do_unmask_irq = 1; mask_irq(irq); - } + } else + unmask_irq(irq); list_for_each_entry(rte, &iosapic_intr_info[irq].rtes, rte_list) iosapic_eoi(rte->iosapic->addr, vec); @@ -427,9 +420,8 @@ static struct irq_chip irq_type_iosapic_level = { .enable = iosapic_enable_level_irq, .disable = iosapic_disable_level_irq, .ack = iosapic_ack_level_irq, - .end = iosapic_end_level_irq, .mask = mask_irq, - .unmask = unmask_irq, + .unmask = iosapic_unmask_level_irq, .set_affinity = iosapic_set_affinity }; @@ -552,37 +544,6 @@ iosapic_reassign_vector (int irq) } } -static struct iosapic_rte_info * __init_refok iosapic_alloc_rte (void) -{ - int i; - struct iosapic_rte_info *rte; - int preallocated = 0; - - if (!iosapic_kmalloc_ok && list_empty(&free_rte_list)) { - rte = alloc_bootmem(sizeof(struct iosapic_rte_info) * - NR_PREALLOCATE_RTE_ENTRIES); - for (i = 0; i < NR_PREALLOCATE_RTE_ENTRIES; i++, rte++) - list_add(&rte->rte_list, &free_rte_list); - } - - if (!list_empty(&free_rte_list)) { - rte = list_entry(free_rte_list.next, struct iosapic_rte_info, - rte_list); - list_del(&rte->rte_list); - preallocated++; - } else { - rte = kmalloc(sizeof(struct iosapic_rte_info), GFP_ATOMIC); - if (!rte) - return NULL; - } - - memset(rte, 0, sizeof(struct iosapic_rte_info)); - if (preallocated) - rte->flags |= RTE_PREALLOCATED; - - return rte; -} - static inline int irq_is_shared (int irq) { return (iosapic_intr_info[irq].count > 1); @@ -615,7 +576,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery, rte = find_rte(irq, gsi); if (!rte) { - rte = iosapic_alloc_rte(); + rte = kzalloc(sizeof (*rte), GFP_ATOMIC); if (!rte) { printk(KERN_WARNING "%s: cannot allocate memory\n", __func__); @@ -658,6 +619,10 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery, idesc->chip->name, irq_type->name); idesc->chip = irq_type; } + if (trigger == IOSAPIC_EDGE) + __set_irq_handler_unlocked(irq, handle_edge_irq); + else + __set_irq_handler_unlocked(irq, handle_level_irq); return 0; } @@ -1161,10 +1126,3 @@ map_iosapic_to_node(unsigned int gsi_base, int node) return; } #endif - -static int __init iosapic_enable_kmalloc (void) -{ - iosapic_kmalloc_ok = 1; - return 0; -} -core_initcall (iosapic_enable_kmalloc); diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index f14c35f9b03a..9a26015c3e50 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -30,6 +30,7 @@ #include <linux/bitops.h> #include <linux/irq.h> #include <linux/ratelimit.h> +#include <linux/acpi.h> #include <asm/delay.h> #include <asm/intrinsics.h> @@ -635,6 +636,7 @@ ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action) desc->chip = &irq_type_ia64_lsapic; if (action) setup_irq(irq, action); + set_irq_handler(irq, handle_percpu_irq); } void __init @@ -650,6 +652,9 @@ ia64_native_register_ipi(void) void __init init_IRQ (void) { +#ifdef CONFIG_ACPI + acpi_boot_init(); +#endif ia64_register_ipi(); register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL); #ifdef CONFIG_SMP diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index a0220dc5ff42..1753f6a30d55 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -2055,25 +2055,6 @@ ia64_mca_init(void) IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __func__); - /* - * Configure the CMCI/P vector and handler. Interrupts for CMC are - * per-processor, so AP CMC interrupts are setup in smp_callin() (smpboot.c). - */ - register_percpu_irq(IA64_CMC_VECTOR, &cmci_irqaction); - register_percpu_irq(IA64_CMCP_VECTOR, &cmcp_irqaction); - ia64_mca_cmc_vector_setup(); /* Setup vector on BSP */ - - /* Setup the MCA rendezvous interrupt vector */ - register_percpu_irq(IA64_MCA_RENDEZ_VECTOR, &mca_rdzv_irqaction); - - /* Setup the MCA wakeup interrupt vector */ - register_percpu_irq(IA64_MCA_WAKEUP_VECTOR, &mca_wkup_irqaction); - -#ifdef CONFIG_ACPI - /* Setup the CPEI/P handler */ - register_percpu_irq(IA64_CPEP_VECTOR, &mca_cpep_irqaction); -#endif - /* Initialize the areas set aside by the OS to buffer the * platform/processor error states for MCA/INIT/CMC * handling. @@ -2103,6 +2084,25 @@ ia64_mca_late_init(void) if (!mca_init) return 0; + /* + * Configure the CMCI/P vector and handler. Interrupts for CMC are + * per-processor, so AP CMC interrupts are setup in smp_callin() (smpboot.c). + */ + register_percpu_irq(IA64_CMC_VECTOR, &cmci_irqaction); + register_percpu_irq(IA64_CMCP_VECTOR, &cmcp_irqaction); + ia64_mca_cmc_vector_setup(); /* Setup vector on BSP */ + + /* Setup the MCA rendezvous interrupt vector */ + register_percpu_irq(IA64_MCA_RENDEZ_VECTOR, &mca_rdzv_irqaction); + + /* Setup the MCA wakeup interrupt vector */ + register_percpu_irq(IA64_MCA_WAKEUP_VECTOR, &mca_wkup_irqaction); + +#ifdef CONFIG_ACPI + /* Setup the CPEI/P handler */ + register_percpu_irq(IA64_CPEP_VECTOR, &mca_cpep_irqaction); +#endif + register_hotcpu_notifier(&mca_cpu_notifier); /* Setup the CMCI/P vector and handler */ diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c index fdf6f9d013e5..77597e5ea60a 100644 --- a/arch/ia64/kernel/palinfo.c +++ b/arch/ia64/kernel/palinfo.c @@ -434,7 +434,7 @@ register_info(char *page) unsigned long phys_stacked; pal_hints_u_t hints; unsigned long iregs, dregs; - char *info_type[]={ + static const char * const info_type[] = { "Implemented AR(s)", "AR(s) with read side-effects", "Implemented CR(s)", diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index cce050e85c73..6b1852f7f972 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -1573,7 +1573,7 @@ pfm_read(struct file *filp, char __user *buf, size_t size, loff_t *ppos) return -EINVAL; } - ctx = (pfm_context_t *)filp->private_data; + ctx = filp->private_data; if (ctx == NULL) { printk(KERN_ERR "perfmon: pfm_read: NULL ctx [%d]\n", task_pid_nr(current)); return -EINVAL; @@ -1673,7 +1673,7 @@ pfm_poll(struct file *filp, poll_table * wait) return 0; } - ctx = (pfm_context_t *)filp->private_data; + ctx = filp->private_data; if (ctx == NULL) { printk(KERN_ERR "perfmon: pfm_poll: NULL ctx [%d]\n", task_pid_nr(current)); return 0; @@ -1733,7 +1733,7 @@ pfm_fasync(int fd, struct file *filp, int on) return -EBADF; } - ctx = (pfm_context_t *)filp->private_data; + ctx = filp->private_data; if (ctx == NULL) { printk(KERN_ERR "perfmon: pfm_fasync NULL ctx [%d]\n", task_pid_nr(current)); return -EBADF; @@ -1841,7 +1841,7 @@ pfm_flush(struct file *filp, fl_owner_t id) return -EBADF; } - ctx = (pfm_context_t *)filp->private_data; + ctx = filp->private_data; if (ctx == NULL) { printk(KERN_ERR "perfmon: pfm_flush: NULL ctx [%d]\n", task_pid_nr(current)); return -EBADF; @@ -1984,7 +1984,7 @@ pfm_close(struct inode *inode, struct file *filp) return -EBADF; } - ctx = (pfm_context_t *)filp->private_data; + ctx = filp->private_data; if (ctx == NULL) { printk(KERN_ERR "perfmon: pfm_close: NULL ctx [%d]\n", task_pid_nr(current)); return -EBADF; @@ -4907,7 +4907,7 @@ restart_args: goto error_args; } - ctx = (pfm_context_t *)file->private_data; + ctx = file->private_data; if (unlikely(ctx == NULL)) { DPRINT(("no context for fd %d\n", fd)); goto error_args; diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index aa8b5fa1a8de..45d7543b69cc 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -642,7 +642,7 @@ salinfo_init(void) for (i = 0; i < ARRAY_SIZE(salinfo_log_name); i++) { data = salinfo_data + i; data->type = i; - init_MUTEX(&data->mutex); + sema_init(&data->mutex, 1); dir = proc_mkdir(salinfo_log_name[i], salinfo_dir); if (!dir) continue; diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 8fb958abf8d0..911cf9749700 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -594,10 +594,6 @@ setup_arch (char **cmdline_p) cpu_init(); /* initialize the bootstrap CPU */ mmu_context_init(); /* initialize context_id bitmap */ -#ifdef CONFIG_ACPI - acpi_boot_init(); -#endif - paravirt_banner(); paravirt_arch_setup_console(cmdline_p); diff --git a/arch/ia64/kernel/stacktrace.c b/arch/ia64/kernel/stacktrace.c new file mode 100644 index 000000000000..5af2783a87f4 --- /dev/null +++ b/arch/ia64/kernel/stacktrace.c @@ -0,0 +1,39 @@ +/* + * arch/ia64/kernel/stacktrace.c + * + * Stack trace management functions + * + */ +#include <linux/sched.h> +#include <linux/stacktrace.h> +#include <linux/module.h> + +static void +ia64_do_save_stack(struct unw_frame_info *info, void *arg) +{ + struct stack_trace *trace = arg; + unsigned long ip; + int skip = trace->skip; + + trace->nr_entries = 0; + do { + unw_get_ip(info, &ip); + if (ip == 0) + break; + if (skip == 0) { + trace->entries[trace->nr_entries++] = ip; + if (trace->nr_entries == trace->max_entries) + break; + } else + skip--; + } while (unw_unwind(info) >= 0); +} + +/* + * Save stack-backtrace addresses into a stack_trace buffer. + */ +void save_stack_trace(struct stack_trace *trace) +{ + unw_init_running(ia64_do_save_stack, trace); +} +EXPORT_SYMBOL(save_stack_trace); diff --git a/arch/ia64/kernel/unwind.c b/arch/ia64/kernel/unwind.c index b6c0e63a0bf6..fed6afa2e8a9 100644 --- a/arch/ia64/kernel/unwind.c +++ b/arch/ia64/kernel/unwind.c @@ -1204,10 +1204,10 @@ desc_spill_sprel_p (unsigned char qp, unw_word t, unsigned char abreg, unw_word static inline unw_hash_index_t hash (unsigned long ip) { -# define hashmagic 0x9e3779b97f4a7c16UL /* based on (sqrt(5)/2-1)*2^64 */ + /* magic number = ((sqrt(5)-1)/2)*2^64 */ + static const unsigned long hashmagic = 0x9e3779b97f4a7c16UL; - return (ip >> 4)*hashmagic >> (64 - UNW_LOG_HASH_SIZE); -#undef hashmagic + return (ip >> 4) * hashmagic >> (64 - UNW_LOG_HASH_SIZE); } static inline long @@ -1531,7 +1531,7 @@ build_script (struct unw_frame_info *info) struct unw_labeled_state *ls, *next; unsigned long ip = info->ip; struct unw_state_record sr; - struct unw_table *table; + struct unw_table *table, *prev; struct unw_reg_info *r; struct unw_insn insn; u8 *dp, *desc_end; @@ -1560,11 +1560,26 @@ build_script (struct unw_frame_info *info) STAT(parse_start = ia64_get_itc()); + prev = NULL; for (table = unw.tables; table; table = table->next) { if (ip >= table->start && ip < table->end) { + /* + * Leave the kernel unwind table at the very front, + * lest moving it breaks some assumption elsewhere. + * Otherwise, move the matching table to the second + * position in the list so that traversals can benefit + * from commonality in backtrace paths. + */ + if (prev && prev != unw.tables) { + /* unw is safe - we're already spinlocked */ + prev->next = table->next; + table->next = unw.tables->next; + unw.tables->next = table; + } e = lookup(table, ip - table->segment_base); break; } + prev = table; } if (!e) { /* no info, return default unwinder (leaf proc, no mem stack, no saved regs) */ diff --git a/arch/ia64/xen/xen_pv_ops.c b/arch/ia64/xen/xen_pv_ops.c index 8adc6a14272a..3e8d350fdf39 100644 --- a/arch/ia64/xen/xen_pv_ops.c +++ b/arch/ia64/xen/xen_pv_ops.c @@ -1136,7 +1136,6 @@ __initconst = { static void __init xen_patch_branch(unsigned long tag, unsigned long type) { - const unsigned long nelem = - sizeof(xen_branch_target) / sizeof(xen_branch_target[0]); - __paravirt_patch_apply_branch(tag, type, xen_branch_target, nelem); + __paravirt_patch_apply_branch(tag, type, xen_branch_target, + ARRAY_SIZE(xen_branch_target)); } diff --git a/arch/m32r/include/asm/irqflags.h b/arch/m32r/include/asm/irqflags.h new file mode 100644 index 000000000000..1f92d29982ae --- /dev/null +++ b/arch/m32r/include/asm/irqflags.h @@ -0,0 +1,104 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto + * Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org> + */ + +#ifndef _ASM_M32R_IRQFLAGS_H +#define _ASM_M32R_IRQFLAGS_H + +#include <linux/types.h> + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + asm volatile("mvfc %0,psw" : "=r"(flags)); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ +#if !defined(CONFIG_CHIP_M32102) && !defined(CONFIG_CHIP_M32104) + asm volatile ( + "clrpsw #0x40 -> nop" + : : : "memory"); +#else + unsigned long tmpreg0, tmpreg1; + asm volatile ( + "ld24 %0, #0 ; Use 32-bit insn. \n\t" + "mvfc %1, psw ; No interrupt can be accepted here. \n\t" + "mvtc %0, psw \n\t" + "and3 %0, %1, #0xffbf \n\t" + "mvtc %0, psw \n\t" + : "=&r" (tmpreg0), "=&r" (tmpreg1) + : + : "cbit", "memory"); +#endif +} + +static inline void arch_local_irq_enable(void) +{ +#if !defined(CONFIG_CHIP_M32102) && !defined(CONFIG_CHIP_M32104) + asm volatile ( + "setpsw #0x40 -> nop" + : : : "memory"); +#else + unsigned long tmpreg; + asm volatile ( + "mvfc %0, psw; \n\t" + "or3 %0, %0, #0x0040; \n\t" + "mvtc %0, psw; \n\t" + : "=&r" (tmpreg) + : + : "cbit", "memory"); +#endif +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + +#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) + asm volatile ( + "mvfc %0, psw; \n\t" + "clrpsw #0x40 -> nop; \n\t" + : "=r" (flags) + : + : "memory"); +#else + unsigned long tmpreg; + asm volatile ( + "ld24 %1, #0 \n\t" + "mvfc %0, psw \n\t" + "mvtc %1, psw \n\t" + "and3 %1, %0, #0xffbf \n\t" + "mvtc %1, psw \n\t" + : "=r" (flags), "=&r" (tmpreg) + : + : "cbit", "memory"); +#endif + return flags; +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile("mvtc %0,psw" + : + : "r" (flags) + : "cbit", "memory"); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return !(flags & 0x40); +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#endif /* _ASM_M32R_IRQFLAGS_H */ diff --git a/arch/m32r/include/asm/system.h b/arch/m32r/include/asm/system.h index c980f5ba8de7..13c46794ccb1 100644 --- a/arch/m32r/include/asm/system.h +++ b/arch/m32r/include/asm/system.h @@ -11,6 +11,7 @@ */ #include <linux/compiler.h> +#include <linux/irqflags.h> #include <asm/assembler.h> #ifdef __KERNEL__ @@ -54,71 +55,6 @@ ); \ } while(0) -/* Interrupt Control */ -#if !defined(CONFIG_CHIP_M32102) && !defined(CONFIG_CHIP_M32104) -#define local_irq_enable() \ - __asm__ __volatile__ ("setpsw #0x40 -> nop": : :"memory") -#define local_irq_disable() \ - __asm__ __volatile__ ("clrpsw #0x40 -> nop": : :"memory") -#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ -static inline void local_irq_enable(void) -{ - unsigned long tmpreg; - __asm__ __volatile__( - "mvfc %0, psw; \n\t" - "or3 %0, %0, #0x0040; \n\t" - "mvtc %0, psw; \n\t" - : "=&r" (tmpreg) : : "cbit", "memory"); -} - -static inline void local_irq_disable(void) -{ - unsigned long tmpreg0, tmpreg1; - __asm__ __volatile__( - "ld24 %0, #0 ; Use 32-bit insn. \n\t" - "mvfc %1, psw ; No interrupt can be accepted here. \n\t" - "mvtc %0, psw \n\t" - "and3 %0, %1, #0xffbf \n\t" - "mvtc %0, psw \n\t" - : "=&r" (tmpreg0), "=&r" (tmpreg1) : : "cbit", "memory"); -} -#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ - -#define local_save_flags(x) \ - __asm__ __volatile__("mvfc %0,psw" : "=r"(x) : /* no input */) - -#define local_irq_restore(x) \ - __asm__ __volatile__("mvtc %0,psw" : /* no outputs */ \ - : "r" (x) : "cbit", "memory") - -#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) -#define local_irq_save(x) \ - __asm__ __volatile__( \ - "mvfc %0, psw; \n\t" \ - "clrpsw #0x40 -> nop; \n\t" \ - : "=r" (x) : /* no input */ : "memory") -#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ -#define local_irq_save(x) \ - ({ \ - unsigned long tmpreg; \ - __asm__ __volatile__( \ - "ld24 %1, #0 \n\t" \ - "mvfc %0, psw \n\t" \ - "mvtc %1, psw \n\t" \ - "and3 %1, %0, #0xffbf \n\t" \ - "mvtc %1, psw \n\t" \ - : "=r" (x), "=&r" (tmpreg) \ - : : "cbit", "memory"); \ - }) -#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ - -#define irqs_disabled() \ - ({ \ - unsigned long flags; \ - local_save_flags(flags); \ - !(flags & 0x40); \ - }) - #define nop() __asm__ __volatile__ ("nop" : : ) #define xchg(ptr, x) \ diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h index 907ed03d792f..80e41492aa2a 100644 --- a/arch/m68k/include/asm/entry_no.h +++ b/arch/m68k/include/asm/entry_no.h @@ -28,7 +28,7 @@ * M68K COLDFIRE */ -#define ALLOWINT 0xf8ff +#define ALLOWINT (~0x700) #ifdef __ASSEMBLY__ diff --git a/arch/m68k/include/asm/irqflags.h b/arch/m68k/include/asm/irqflags.h new file mode 100644 index 000000000000..4a5b284a1550 --- /dev/null +++ b/arch/m68k/include/asm/irqflags.h @@ -0,0 +1,76 @@ +#ifndef _M68K_IRQFLAGS_H +#define _M68K_IRQFLAGS_H + +#include <linux/types.h> +#include <linux/hardirq.h> +#include <linux/preempt.h> +#include <asm/thread_info.h> +#include <asm/entry.h> + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + asm volatile ("movew %%sr,%0" : "=d" (flags) : : "memory"); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ +#ifdef CONFIG_COLDFIRE + asm volatile ( + "move %/sr,%%d0 \n\t" + "ori.l #0x0700,%%d0 \n\t" + "move %%d0,%/sr \n" + : /* no outputs */ + : + : "cc", "%d0", "memory"); +#else + asm volatile ("oriw #0x0700,%%sr" : : : "memory"); +#endif +} + +static inline void arch_local_irq_enable(void) +{ +#if defined(CONFIG_COLDFIRE) + asm volatile ( + "move %/sr,%%d0 \n\t" + "andi.l #0xf8ff,%%d0 \n\t" + "move %%d0,%/sr \n" + : /* no outputs */ + : + : "cc", "%d0", "memory"); +#else +# if defined(CONFIG_MMU) + if (MACH_IS_Q40 || !hardirq_count()) +# endif + asm volatile ( + "andiw %0,%%sr" + : + : "i" (ALLOWINT) + : "memory"); +#endif +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags = arch_local_save_flags(); + arch_local_irq_disable(); + return flags; +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile ("movew %0,%%sr" : : "d" (flags) : "memory"); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return (flags & ~ALLOWINT) != 0; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#endif /* _M68K_IRQFLAGS_H */ diff --git a/arch/m68k/include/asm/system_mm.h b/arch/m68k/include/asm/system_mm.h index dbb6515ffd5b..12053c44cccf 100644 --- a/arch/m68k/include/asm/system_mm.h +++ b/arch/m68k/include/asm/system_mm.h @@ -3,6 +3,7 @@ #include <linux/linkage.h> #include <linux/kernel.h> +#include <linux/irqflags.h> #include <asm/segment.h> #include <asm/entry.h> @@ -62,30 +63,6 @@ asmlinkage void resume(void); #define smp_wmb() barrier() #define smp_read_barrier_depends() ((void)0) -/* interrupt control.. */ -#if 0 -#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") -#else -#include <linux/hardirq.h> -#define local_irq_enable() ({ \ - if (MACH_IS_Q40 || !hardirq_count()) \ - asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory"); \ -}) -#endif -#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") -#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") -#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") - -static inline int irqs_disabled(void) -{ - unsigned long flags; - local_save_flags(flags); - return flags & ~ALLOWINT; -} - -/* For spinlocks etc */ -#define local_irq_save(x) ({ local_save_flags(x); local_irq_disable(); }) - #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) struct __xchg_dummy { unsigned long a[100]; }; diff --git a/arch/m68k/include/asm/system_no.h b/arch/m68k/include/asm/system_no.h index 3c0718d74398..20126c09794e 100644 --- a/arch/m68k/include/asm/system_no.h +++ b/arch/m68k/include/asm/system_no.h @@ -2,6 +2,7 @@ #define _M68KNOMMU_SYSTEM_H #include <linux/linkage.h> +#include <linux/irqflags.h> #include <asm/segment.h> #include <asm/entry.h> @@ -46,54 +47,6 @@ asmlinkage void resume(void); (last) = _last; \ } -#ifdef CONFIG_COLDFIRE -#define local_irq_enable() __asm__ __volatile__ ( \ - "move %/sr,%%d0\n\t" \ - "andi.l #0xf8ff,%%d0\n\t" \ - "move %%d0,%/sr\n" \ - : /* no outputs */ \ - : \ - : "cc", "%d0", "memory") -#define local_irq_disable() __asm__ __volatile__ ( \ - "move %/sr,%%d0\n\t" \ - "ori.l #0x0700,%%d0\n\t" \ - "move %%d0,%/sr\n" \ - : /* no outputs */ \ - : \ - : "cc", "%d0", "memory") -/* For spinlocks etc */ -#define local_irq_save(x) __asm__ __volatile__ ( \ - "movew %%sr,%0\n\t" \ - "movew #0x0700,%%d0\n\t" \ - "or.l %0,%%d0\n\t" \ - "movew %%d0,%/sr" \ - : "=d" (x) \ - : \ - : "cc", "%d0", "memory") -#else - -/* portable version */ /* FIXME - see entry.h*/ -#define ALLOWINT 0xf8ff - -#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") -#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") -#endif - -#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") -#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") - -/* For spinlocks etc */ -#ifndef local_irq_save -#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0) -#endif - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - ((flags & 0x0700) == 0x0700); \ -}) - #define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc") /* @@ -206,12 +159,4 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz #define arch_align_stack(x) (x) -static inline int irqs_disabled_flags(unsigned long flags) -{ - if (flags & 0x0700) - return 0; - else - return 1; -} - #endif /* _M68KNOMMU_SYSTEM_H */ diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c index 9a8876f715d8..24335022fa2c 100644 --- a/arch/m68knommu/kernel/asm-offsets.c +++ b/arch/m68knommu/kernel/asm-offsets.c @@ -74,8 +74,6 @@ int main(void) DEFINE(PT_PTRACED, PT_PTRACED); - DEFINE(THREAD_SIZE, THREAD_SIZE); - /* Offsets in thread_info structure */ DEFINE(TI_TASK, offsetof(struct thread_info, task)); DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain)); diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S index 4b91aa24eb00..0b2d7c7adf79 100644 --- a/arch/m68knommu/platform/coldfire/head.S +++ b/arch/m68knommu/platform/coldfire/head.S @@ -15,6 +15,7 @@ #include <asm/coldfire.h> #include <asm/mcfcache.h> #include <asm/mcfsim.h> +#include <asm/thread_info.h> /*****************************************************************************/ diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h index 2c38c6d80176..5fd31905775d 100644 --- a/arch/microblaze/include/asm/irqflags.h +++ b/arch/microblaze/include/asm/irqflags.h @@ -9,103 +9,114 @@ #ifndef _ASM_MICROBLAZE_IRQFLAGS_H #define _ASM_MICROBLAZE_IRQFLAGS_H -#include <linux/irqflags.h> +#include <linux/types.h> #include <asm/registers.h> -# if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR - -# define raw_local_irq_save(flags) \ - do { \ - asm volatile (" msrclr %0, %1; \ - nop;" \ - : "=r"(flags) \ - : "i"(MSR_IE) \ - : "memory"); \ - } while (0) - -# define raw_local_irq_disable() \ - do { \ - asm volatile (" msrclr r0, %0; \ - nop;" \ - : \ - : "i"(MSR_IE) \ - : "memory"); \ - } while (0) - -# define raw_local_irq_enable() \ - do { \ - asm volatile (" msrset r0, %0; \ - nop;" \ - : \ - : "i"(MSR_IE) \ - : "memory"); \ - } while (0) - -# else /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR == 0 */ - -# define raw_local_irq_save(flags) \ - do { \ - register unsigned tmp; \ - asm volatile (" mfs %0, rmsr; \ - nop; \ - andi %1, %0, %2; \ - mts rmsr, %1; \ - nop;" \ - : "=r"(flags), "=r" (tmp) \ - : "i"(~MSR_IE) \ - : "memory"); \ - } while (0) - -# define raw_local_irq_disable() \ - do { \ - register unsigned tmp; \ - asm volatile (" mfs %0, rmsr; \ - nop; \ - andi %0, %0, %1; \ - mts rmsr, %0; \ - nop;" \ - : "=r"(tmp) \ - : "i"(~MSR_IE) \ - : "memory"); \ - } while (0) - -# define raw_local_irq_enable() \ - do { \ - register unsigned tmp; \ - asm volatile (" mfs %0, rmsr; \ - nop; \ - ori %0, %0, %1; \ - mts rmsr, %0; \ - nop;" \ - : "=r"(tmp) \ - : "i"(MSR_IE) \ - : "memory"); \ - } while (0) - -# endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */ - -#define raw_local_irq_restore(flags) \ - do { \ - asm volatile (" mts rmsr, %0; \ - nop;" \ - : \ - : "r"(flags) \ - : "memory"); \ - } while (0) - -static inline unsigned long get_msr(void) +#ifdef CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + asm volatile(" msrclr %0, %1 \n" + " nop \n" + : "=r"(flags) + : "i"(MSR_IE) + : "memory"); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ + /* this uses r0 without declaring it - is that correct? */ + asm volatile(" msrclr r0, %0 \n" + " nop \n" + : + : "i"(MSR_IE) + : "memory"); +} + +static inline void arch_local_irq_enable(void) +{ + /* this uses r0 without declaring it - is that correct? */ + asm volatile(" msrset r0, %0 \n" + " nop \n" + : + : "i"(MSR_IE) + : "memory"); +} + +#else /* !CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */ + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags, tmp; + asm volatile (" mfs %0, rmsr \n" + " nop \n" + " andi %1, %0, %2 \n" + " mts rmsr, %1 \n" + " nop \n" + : "=r"(flags), "=r"(tmp) + : "i"(~MSR_IE) + : "memory"); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ + unsigned long tmp; + asm volatile(" mfs %0, rmsr \n" + " nop \n" + " andi %0, %0, %1 \n" + " mts rmsr, %0 \n" + " nop \n" + : "=r"(tmp) + : "i"(~MSR_IE) + : "memory"); +} + +static inline void arch_local_irq_enable(void) +{ + unsigned long tmp; + asm volatile(" mfs %0, rmsr \n" + " nop \n" + " ori %0, %0, %1 \n" + " mts rmsr, %0 \n" + " nop \n" + : "=r"(tmp) + : "i"(MSR_IE) + : "memory"); +} + +#endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */ + +static inline unsigned long arch_local_save_flags(void) { unsigned long flags; - asm volatile (" mfs %0, rmsr; \ - nop;" \ - : "=r"(flags) \ - : \ - : "memory"); \ + asm volatile(" mfs %0, rmsr \n" + " nop \n" + : "=r"(flags) + : + : "memory"); return flags; } -#define raw_local_save_flags(flags) ((flags) = get_msr()) -#define raw_irqs_disabled() ((get_msr() & MSR_IE) == 0) -#define raw_irqs_disabled_flags(flags) ((flags & MSR_IE) == 0) +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile(" mts rmsr, %0 \n" + " nop \n" + : + : "r"(flags) + : "memory"); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return (flags & MSR_IE) == 0; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} #endif /* _ASM_MICROBLAZE_IRQFLAGS_H */ diff --git a/arch/microblaze/include/asm/memblock.h b/arch/microblaze/include/asm/memblock.h index f9c2fa331d2a..20a8e257c77f 100644 --- a/arch/microblaze/include/asm/memblock.h +++ b/arch/microblaze/include/asm/memblock.h @@ -9,9 +9,6 @@ #ifndef _ASM_MICROBLAZE_MEMBLOCK_H #define _ASM_MICROBLAZE_MEMBLOCK_H -/* MEMBLOCK limit is OFF */ -#define MEMBLOCK_REAL_LIMIT 0xFFFFFFFF - #endif /* _ASM_MICROBLAZE_MEMBLOCK_H */ diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index 65eb00419d19..c8437866d3b7 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -70,16 +70,16 @@ static void __init paging_init(void) void __init setup_memory(void) { - int i; unsigned long map_size; + struct memblock_region *reg; + #ifndef CONFIG_MMU u32 kernel_align_start, kernel_align_size; /* Find main memory where is the kernel */ - for (i = 0; i < memblock.memory.cnt; i++) { - memory_start = (u32) memblock.memory.region[i].base; - memory_end = (u32) memblock.memory.region[i].base - + (u32) memblock.memory.region[i].size; + for_each_memblock(memory, reg) { + memory_start = (u32)reg->base; + memory_end = (u32) reg->base + reg->size; if ((memory_start <= (u32)_text) && ((u32)_text <= memory_end)) { memory_size = memory_end - memory_start; @@ -142,12 +142,10 @@ void __init setup_memory(void) free_bootmem(memory_start, memory_size); /* reserve allocate blocks */ - for (i = 0; i < memblock.reserved.cnt; i++) { - pr_debug("reserved %d - 0x%08x-0x%08x\n", i, - (u32) memblock.reserved.region[i].base, - (u32) memblock_size_bytes(&memblock.reserved, i)); - reserve_bootmem(memblock.reserved.region[i].base, - memblock_size_bytes(&memblock.reserved, i) - 1, BOOTMEM_DEFAULT); + for_each_memblock(reserved, reg) { + pr_debug("reserved - 0x%08x-0x%08x\n", + (u32) reg->base, (u32) reg->size); + reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); } #ifdef CONFIG_MMU init_bootmem_done = 1; @@ -230,7 +228,7 @@ static void mm_cmdline_setup(void) if (maxmem && memory_size > maxmem) { memory_size = maxmem; memory_end = memory_start + memory_size; - memblock.memory.region[0].size = memory_size; + memblock.memory.regions[0].size = memory_size; } } } @@ -273,14 +271,14 @@ asmlinkage void __init mmu_init(void) machine_restart(NULL); } - if ((u32) memblock.memory.region[0].size < 0x1000000) { + if ((u32) memblock.memory.regions[0].size < 0x1000000) { printk(KERN_EMERG "Memory must be greater than 16MB\n"); machine_restart(NULL); } /* Find main memory where the kernel is */ - memory_start = (u32) memblock.memory.region[0].base; - memory_end = (u32) memblock.memory.region[0].base + - (u32) memblock.memory.region[0].size; + memory_start = (u32) memblock.memory.regions[0].base; + memory_end = (u32) memblock.memory.regions[0].base + + (u32) memblock.memory.regions[0].size; memory_size = memory_end - memory_start; mm_cmdline_setup(); /* FIXME parse args from command line - not used */ diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c index 3bc4fd2155d7..c52af8821da0 100644 --- a/arch/mips/alchemy/devboards/bcsr.c +++ b/arch/mips/alchemy/devboards/bcsr.c @@ -10,6 +10,7 @@ #include <linux/interrupt.h> #include <linux/module.h> #include <linux/spinlock.h> +#include <linux/irq.h> #include <asm/addrspace.h> #include <asm/io.h> #include <asm/mach-db1x00/bcsr.h> diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c index c781556c44e4..4ec2642c568f 100644 --- a/arch/mips/ar7/irq.c +++ b/arch/mips/ar7/irq.c @@ -19,6 +19,7 @@ #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/irq.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c index a0c5cd18c192..3be87f2422f0 100644 --- a/arch/mips/bcm63xx/irq.c +++ b/arch/mips/bcm63xx/irq.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/irq.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> #include <bcm63xx_cpu.h> diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c index 638adab02842..12dbf533b77d 100644 --- a/arch/mips/cavium-octeon/serial.c +++ b/arch/mips/cavium-octeon/serial.c @@ -13,6 +13,7 @@ #include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/tty.h> +#include <linux/irq.h> #include <asm/time.h> diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index bd5431e1f408..fa45e924be05 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -18,6 +18,7 @@ #include <linux/spinlock.h> #include <linux/types.h> #include <linux/pm.h> +#include <linux/irq.h> #include <asm/bootinfo.h> #include <asm/cpu.h> diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h index 701ec0ba8fa9..9ef3b0d17896 100644 --- a/arch/mips/include/asm/irqflags.h +++ b/arch/mips/include/asm/irqflags.h @@ -17,7 +17,7 @@ #include <asm/hazards.h> __asm__( - " .macro raw_local_irq_enable \n" + " .macro arch_local_irq_enable \n" " .set push \n" " .set reorder \n" " .set noat \n" @@ -40,7 +40,7 @@ __asm__( extern void smtc_ipi_replay(void); -static inline void raw_local_irq_enable(void) +static inline void arch_local_irq_enable(void) { #ifdef CONFIG_MIPS_MT_SMTC /* @@ -50,7 +50,7 @@ static inline void raw_local_irq_enable(void) smtc_ipi_replay(); #endif __asm__ __volatile__( - "raw_local_irq_enable" + "arch_local_irq_enable" : /* no outputs */ : /* no inputs */ : "memory"); @@ -76,7 +76,7 @@ static inline void raw_local_irq_enable(void) * Workaround: mask EXL bit of the result or place a nop before mfc0. */ __asm__( - " .macro raw_local_irq_disable\n" + " .macro arch_local_irq_disable\n" " .set push \n" " .set noat \n" #ifdef CONFIG_MIPS_MT_SMTC @@ -97,17 +97,17 @@ __asm__( " .set pop \n" " .endm \n"); -static inline void raw_local_irq_disable(void) +static inline void arch_local_irq_disable(void) { __asm__ __volatile__( - "raw_local_irq_disable" + "arch_local_irq_disable" : /* no outputs */ : /* no inputs */ : "memory"); } __asm__( - " .macro raw_local_save_flags flags \n" + " .macro arch_local_save_flags flags \n" " .set push \n" " .set reorder \n" #ifdef CONFIG_MIPS_MT_SMTC @@ -118,13 +118,15 @@ __asm__( " .set pop \n" " .endm \n"); -#define raw_local_save_flags(x) \ -__asm__ __volatile__( \ - "raw_local_save_flags %0" \ - : "=r" (x)) +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + asm volatile("arch_local_save_flags %0" : "=r" (flags)); + return flags; +} __asm__( - " .macro raw_local_irq_save result \n" + " .macro arch_local_irq_save result \n" " .set push \n" " .set reorder \n" " .set noat \n" @@ -148,15 +150,18 @@ __asm__( " .set pop \n" " .endm \n"); -#define raw_local_irq_save(x) \ -__asm__ __volatile__( \ - "raw_local_irq_save\t%0" \ - : "=r" (x) \ - : /* no inputs */ \ - : "memory") +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + asm volatile("arch_local_irq_save\t%0" + : "=r" (flags) + : /* no inputs */ + : "memory"); + return flags; +} __asm__( - " .macro raw_local_irq_restore flags \n" + " .macro arch_local_irq_restore flags \n" " .set push \n" " .set noreorder \n" " .set noat \n" @@ -196,7 +201,7 @@ __asm__( " .endm \n"); -static inline void raw_local_irq_restore(unsigned long flags) +static inline void arch_local_irq_restore(unsigned long flags) { unsigned long __tmp1; @@ -211,24 +216,24 @@ static inline void raw_local_irq_restore(unsigned long flags) #endif __asm__ __volatile__( - "raw_local_irq_restore\t%0" + "arch_local_irq_restore\t%0" : "=r" (__tmp1) : "0" (flags) : "memory"); } -static inline void __raw_local_irq_restore(unsigned long flags) +static inline void __arch_local_irq_restore(unsigned long flags) { unsigned long __tmp1; __asm__ __volatile__( - "raw_local_irq_restore\t%0" + "arch_local_irq_restore\t%0" : "=r" (__tmp1) : "0" (flags) : "memory"); } -static inline int raw_irqs_disabled_flags(unsigned long flags) +static inline int arch_irqs_disabled_flags(unsigned long flags) { #ifdef CONFIG_MIPS_MT_SMTC /* diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index cb6985f24303..1e29b9dd1d73 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -13,6 +13,7 @@ #include <linux/io.h> #include <linux/init.h> +#include <linux/irq.h> /* loongson internal northbridge initialization */ extern void bonito_irq_init(void); diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index ee18028efe92..35b3e2f0af04 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/smp.h> #include <linux/spinlock.h> +#include <linux/irq.h> #include <asm/irq_cpu.h> #include <asm/i8253.h> diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c index bfea327c636c..36c3898b76db 100644 --- a/arch/mips/kernel/cevt-bcm1480.c +++ b/arch/mips/kernel/cevt-bcm1480.c @@ -19,6 +19,7 @@ #include <linux/interrupt.h> #include <linux/percpu.h> #include <linux/smp.h> +#include <linux/irq.h> #include <asm/addrspace.h> #include <asm/io.h> diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c index 00a4da277cbb..939157e397b9 100644 --- a/arch/mips/kernel/cevt-ds1287.c +++ b/arch/mips/kernel/cevt-ds1287.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/mc146818rtc.h> +#include <linux/irq.h> #include <asm/time.h> diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c index 392ef3756c56..339f3639b90e 100644 --- a/arch/mips/kernel/cevt-gt641xx.c +++ b/arch/mips/kernel/cevt-gt641xx.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/spinlock.h> +#include <linux/irq.h> #include <asm/gt64120.h> #include <asm/time.h> diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 2a4d50ff5e2c..2f4d7a99bcc2 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -10,6 +10,7 @@ #include <linux/interrupt.h> #include <linux/percpu.h> #include <linux/smp.h> +#include <linux/irq.h> #include <asm/smtc_ipi.h> #include <asm/time.h> diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c index da78eeaea6e8..590c54f28a81 100644 --- a/arch/mips/kernel/cevt-sb1250.c +++ b/arch/mips/kernel/cevt-sb1250.c @@ -17,6 +17,7 @@ */ #include <linux/clockchips.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/percpu.h> #include <linux/smp.h> diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c index b102e4f1630e..2e72d30b2f05 100644 --- a/arch/mips/kernel/cevt-smtc.c +++ b/arch/mips/kernel/cevt-smtc.c @@ -11,6 +11,7 @@ #include <linux/interrupt.h> #include <linux/percpu.h> #include <linux/smp.h> +#include <linux/irq.h> #include <asm/smtc_ipi.h> #include <asm/time.h> diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index 218ee6bda935..0b7377361e22 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -13,6 +13,7 @@ */ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <asm/time.h> #include <asm/txx9tmr.h> diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index 94794062a177..2392a7a296d4 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -9,6 +9,7 @@ #include <linux/module.h> #include <linux/smp.h> #include <linux/spinlock.h> +#include <linux/irq.h> #include <asm/delay.h> #include <asm/i8253.h> diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 27799113332c..c58176cc796b 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/spinlock.h> #include <linux/sysdev.h> +#include <linux/irq.h> #include <asm/i8259.h> #include <asm/io.h> diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c index 82ba9f62f49e..1774271af848 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/arch/mips/kernel/irq-gic.c @@ -3,11 +3,11 @@ #include <linux/bitmap.h> #include <linux/init.h> #include <linux/smp.h> +#include <linux/irq.h> #include <asm/io.h> #include <asm/gic.h> #include <asm/gcmpregs.h> -#include <asm/irq.h> #include <linux/hardirq.h> #include <asm-generic/bitops/find.h> diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c index fb50cc78b28b..9731e8b47862 100644 --- a/arch/mips/kernel/irq-rm7000.c +++ b/arch/mips/kernel/irq-rm7000.c @@ -11,6 +11,7 @@ */ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/kernel.h> #include <asm/irq_cpu.h> diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c index b47e4615ec12..b7e4025b58a8 100644 --- a/arch/mips/kernel/irq-rm9000.c +++ b/arch/mips/kernel/irq-rm9000.c @@ -11,6 +11,7 @@ */ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c index 55c8a3ca507b..0262abe09121 100644 --- a/arch/mips/kernel/irq_cpu.c +++ b/arch/mips/kernel/irq_cpu.c @@ -30,6 +30,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/irq.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> diff --git a/arch/mips/kernel/irq_txx9.c b/arch/mips/kernel/irq_txx9.c index 9b78029bea70..95a96f69172d 100644 --- a/arch/mips/kernel/irq_txx9.c +++ b/arch/mips/kernel/irq_txx9.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/types.h> +#include <linux/irq.h> #include <asm/txx9irq.h> struct txx9_irc_reg { diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index cfeb2c155896..39c08254b0f1 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1038,7 +1038,7 @@ void deferred_smtc_ipi(void) * but it's more efficient, given that we're already * running down the IPI queue. */ - __raw_local_irq_restore(flags); + __arch_local_irq_restore(flags); } } @@ -1190,7 +1190,7 @@ void smtc_ipi_replay(void) /* ** But use a raw restore here to avoid recursion. */ - __raw_local_irq_restore(flags); + __arch_local_irq_restore(flags); if (pipi) { self_ipi(pipi); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 03ec0019032b..d053bf4759e4 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -28,6 +28,7 @@ #include <linux/kprobes.h> #include <linux/notifier.h> #include <linux/kdb.h> +#include <linux/irq.h> #include <asm/bootinfo.h> #include <asm/branch.h> @@ -51,7 +52,6 @@ #include <asm/mmu_context.h> #include <asm/types.h> #include <asm/stacktrace.h> -#include <asm/irq.h> #include <asm/uasm.h> extern void check_wait(void); diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c index 72e32a7715be..4c35301720e7 100644 --- a/arch/mips/mti-malta/malta-platform.c +++ b/arch/mips/mti-malta/malta-platform.c @@ -25,6 +25,7 @@ #include <linux/serial_8250.h> #include <linux/mc146818rtc.h> #include <linux/module.h> +#include <linux/irq.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index 31c150196595..6a3bdb5ffa80 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -38,6 +38,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <asm/addrspace.h> #include <asm/txx9irq.h> diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index 5989e747527f..a1e7e6d80c8c 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -17,6 +17,7 @@ */ #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <asm/txx9/pci.h> #include <asm/txx9/tx4927pcic.h> diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c index 94c9c2c9fbc1..07e71ff2433f 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c @@ -14,6 +14,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/bitops.h> +#include <linux/irq.h> #include <asm/system.h> diff --git a/arch/mips/powertv/asic/irq_asic.c b/arch/mips/powertv/asic/irq_asic.c index b54d24499b06..e55382434155 100644 --- a/arch/mips/powertv/asic/irq_asic.c +++ b/arch/mips/powertv/asic/irq_asic.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/irq.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c index 00ed19f0bdb5..70482540b3db 100644 --- a/arch/mips/rb532/serial.c +++ b/arch/mips/rb532/serial.c @@ -29,6 +29,7 @@ #include <linux/tty.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> +#include <linux/irq.h> #include <asm/serial.h> #include <asm/mach-rc32434/rb.h> diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c index e6980892834a..bbe7187879fa 100644 --- a/arch/mips/sni/a20r.c +++ b/arch/mips/sni/a20r.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index 51e62bbaa23b..8c92c73bc717 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/pci.h> #include <linux/serial_8250.h> diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c index f4699d35858b..dc9874553bec 100644 --- a/arch/mips/sni/pcit.c +++ b/arch/mips/sni/pcit.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/pci.h> #include <linux/serial_8250.h> diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index 90c558f7c0fa..0e6f42c2bbc8 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -13,6 +13,7 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/io.h> diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index f3b60e671207..c76151b56568 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -1,5 +1,6 @@ #include <linux/types.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/smp.h> #include <linux/time.h> #include <linux/clockchips.h> diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c index ad2870def8f1..e1828e8bcaef 100644 --- a/arch/mips/txx9/generic/irq_tx4927.c +++ b/arch/mips/txx9/generic/irq_tx4927.c @@ -25,6 +25,7 @@ */ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <asm/irq_cpu.h> #include <asm/txx9/tx4927.h> diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c index 025ae11359a8..a6e6e805097a 100644 --- a/arch/mips/txx9/generic/irq_tx4938.c +++ b/arch/mips/txx9/generic/irq_tx4938.c @@ -13,6 +13,7 @@ */ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <asm/irq_cpu.h> #include <asm/txx9/tx4938.h> diff --git a/arch/mips/txx9/generic/irq_tx4939.c b/arch/mips/txx9/generic/irq_tx4939.c index 013213a8706b..3886ad77cbad 100644 --- a/arch/mips/txx9/generic/irq_tx4939.c +++ b/arch/mips/txx9/generic/irq_tx4939.c @@ -19,6 +19,7 @@ */ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/types.h> #include <asm/irq_cpu.h> #include <asm/txx9irq.h> diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 575d219b8001..812816c45662 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -24,6 +24,7 @@ #include <linux/leds.h> #include <linux/sysdev.h> #include <linux/slab.h> +#include <linux/irq.h> #include <asm/bootinfo.h> #include <asm/time.h> #include <asm/reboot.h> diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c index 6ec626c9473f..0a7f8e3b9fd7 100644 --- a/arch/mips/txx9/jmr3927/irq.c +++ b/arch/mips/txx9/jmr3927/irq.c @@ -32,6 +32,7 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <asm/io.h> #include <asm/mipsregs.h> diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index 9c14ebb26cb4..c4b54d20efd3 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -111,6 +111,7 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <asm/io.h> #include <asm/mipsregs.h> #include <asm/txx9/generic.h> diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c index 7d21befb8932..67a73a8065ec 100644 --- a/arch/mips/txx9/rbtx4938/irq.c +++ b/arch/mips/txx9/rbtx4938/irq.c @@ -64,6 +64,7 @@ */ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <asm/mipsregs.h> #include <asm/txx9/generic.h> #include <asm/txx9/rbtx4938.h> diff --git a/arch/mips/txx9/rbtx4939/irq.c b/arch/mips/txx9/rbtx4939/irq.c index 500cc0a908e6..57fa740a7205 100644 --- a/arch/mips/txx9/rbtx4939/irq.c +++ b/arch/mips/txx9/rbtx4939/irq.c @@ -11,6 +11,7 @@ */ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <asm/mipsregs.h> #include <asm/txx9/rbtx4939.h> diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index bef06872f012..0975eb72d385 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -19,6 +19,7 @@ */ #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/irq.h> #include <asm/irq_cpu.h> #include <asm/system.h> diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c index 54eae56108fb..bbd45d2559d6 100644 --- a/arch/mips/vr41xx/common/siu.c +++ b/arch/mips/vr41xx/common/siu.c @@ -22,6 +22,7 @@ #include <linux/ioport.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/irq.h> #include <asm/cpu.h> #include <asm/vr41xx/siu.h> diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h new file mode 100644 index 000000000000..5e529a117cb2 --- /dev/null +++ b/arch/mn10300/include/asm/irqflags.h @@ -0,0 +1,123 @@ +/* MN10300 IRQ flag handling + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#include <asm/cpu-regs.h> + +/* + * interrupt control + * - "disabled": run in IM1/2 + * - level 0 - GDB stub + * - level 1 - virtual serial DMA (if present) + * - level 5 - normal interrupt priority + * - level 6 - timer interrupt + * - "enabled": run in IM7 + */ +#ifdef CONFIG_MN10300_TTYSM +#define MN10300_CLI_LEVEL EPSW_IM_2 +#else +#define MN10300_CLI_LEVEL EPSW_IM_1 +#endif + +#ifndef __ASSEMBLY__ + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + + asm volatile("mov epsw,%0" : "=d"(flags)); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ + asm volatile( + " and %0,epsw \n" + " or %1,epsw \n" + " nop \n" + " nop \n" + " nop \n" + : + : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) + : "memory"); +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + + flags = arch_local_save_flags(); + arch_local_irq_disable(); + return flags; +} + +/* + * we make sure arch_irq_enable() doesn't cause priority inversion + */ +extern unsigned long __mn10300_irq_enabled_epsw; + +static inline void arch_local_irq_enable(void) +{ + unsigned long tmp; + + asm volatile( + " mov epsw,%0 \n" + " and %1,%0 \n" + " or %2,%0 \n" + " mov %0,epsw \n" + : "=&d"(tmp) + : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) + : "memory"); +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile( + " mov %0,epsw \n" + " nop \n" + " nop \n" + " nop \n" + : + : "d"(flags) + : "memory", "cc"); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return (flags & EPSW_IM) <= MN10300_CLI_LEVEL; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +/* + * Hook to save power by halting the CPU + * - called from the idle loop + * - must reenable interrupts (which takes three instruction cycles to complete) + */ +static inline void arch_safe_halt(void) +{ + asm volatile( + " or %0,epsw \n" + " nop \n" + " nop \n" + " bset %2,(%1) \n" + : + : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP) + : "cc"); +} + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_IRQFLAGS_H */ diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h index 3636c054dcd5..9f7c7e17c01e 100644 --- a/arch/mn10300/include/asm/system.h +++ b/arch/mn10300/include/asm/system.h @@ -17,6 +17,7 @@ #ifndef __ASSEMBLY__ #include <linux/kernel.h> +#include <linux/irqflags.h> struct task_struct; struct thread_struct; @@ -81,114 +82,6 @@ do { \ /*****************************************************************************/ /* - * interrupt control - * - "disabled": run in IM1/2 - * - level 0 - GDB stub - * - level 1 - virtual serial DMA (if present) - * - level 5 - normal interrupt priority - * - level 6 - timer interrupt - * - "enabled": run in IM7 - */ -#ifdef CONFIG_MN10300_TTYSM -#define MN10300_CLI_LEVEL EPSW_IM_2 -#else -#define MN10300_CLI_LEVEL EPSW_IM_1 -#endif - -#define local_save_flags(x) \ -do { \ - typecheck(unsigned long, x); \ - asm volatile( \ - " mov epsw,%0 \n" \ - : "=d"(x) \ - ); \ -} while (0) - -#define local_irq_disable() \ -do { \ - asm volatile( \ - " and %0,epsw \n" \ - " or %1,epsw \n" \ - " nop \n" \ - " nop \n" \ - " nop \n" \ - : \ - : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \ - ); \ -} while (0) - -#define local_irq_save(x) \ -do { \ - local_save_flags(x); \ - local_irq_disable(); \ -} while (0) - -/* - * we make sure local_irq_enable() doesn't cause priority inversion - */ -#ifndef __ASSEMBLY__ - -extern unsigned long __mn10300_irq_enabled_epsw; - -#endif - -#define local_irq_enable() \ -do { \ - unsigned long tmp; \ - \ - asm volatile( \ - " mov epsw,%0 \n" \ - " and %1,%0 \n" \ - " or %2,%0 \n" \ - " mov %0,epsw \n" \ - : "=&d"(tmp) \ - : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \ - : "cc" \ - ); \ -} while (0) - -#define local_irq_restore(x) \ -do { \ - typecheck(unsigned long, x); \ - asm volatile( \ - " mov %0,epsw \n" \ - " nop \n" \ - " nop \n" \ - " nop \n" \ - : \ - : "d"(x) \ - : "memory", "cc" \ - ); \ -} while (0) - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \ -}) - -/* hook to save power by halting the CPU - * - called from the idle loop - * - must reenable interrupts (which takes three instruction cycles to complete) - */ -#define safe_halt() \ -do { \ - asm volatile(" or %0,epsw \n" \ - " nop \n" \ - " nop \n" \ - " bset %2,(%1) \n" \ - : \ - : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\ - : "cc" \ - ); \ -} while (0) - -#define STI or EPSW_IE|EPSW_IM,epsw -#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop - -/*****************************************************************************/ -/* * MN10300 doesn't actually have an exchange instruction */ #ifndef __ASSEMBLY__ diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index d9ed5a15c547..3d394b4eefba 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -16,6 +16,7 @@ #include <linux/linkage.h> #include <asm/smp.h> #include <asm/system.h> +#include <asm/irqflags.h> #include <asm/thread_info.h> #include <asm/intctl-regs.h> #include <asm/busctl-regs.h> diff --git a/arch/parisc/include/asm/irqflags.h b/arch/parisc/include/asm/irqflags.h new file mode 100644 index 000000000000..34f9cb9b4754 --- /dev/null +++ b/arch/parisc/include/asm/irqflags.h @@ -0,0 +1,46 @@ +#ifndef __PARISC_IRQFLAGS_H +#define __PARISC_IRQFLAGS_H + +#include <linux/types.h> +#include <asm/psw.h> + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + asm volatile("ssm 0, %0" : "=r" (flags) : : "memory"); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ + asm volatile("rsm %0,%%r0\n" : : "i" (PSW_I) : "memory"); +} + +static inline void arch_local_irq_enable(void) +{ + asm volatile("ssm %0,%%r0\n" : : "i" (PSW_I) : "memory"); +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + asm volatile("rsm %1,%0" : "=r" (flags) : "i" (PSW_I) : "memory"); + return flags; +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile("mtsm %0" : : "r" (flags) : "memory"); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return (flags & PSW_I) == 0; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#endif /* __PARISC_IRQFLAGS_H */ diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h index 2ab4af58ecb9..b19e63a8e848 100644 --- a/arch/parisc/include/asm/system.h +++ b/arch/parisc/include/asm/system.h @@ -1,7 +1,7 @@ #ifndef __PARISC_SYSTEM_H #define __PARISC_SYSTEM_H -#include <asm/psw.h> +#include <linux/irqflags.h> /* The program status word as bitfields. */ struct pa_psw { @@ -48,23 +48,6 @@ extern struct task_struct *_switch_to(struct task_struct *, struct task_struct * (last) = _switch_to(prev, next); \ } while(0) -/* interrupt control */ -#define local_save_flags(x) __asm__ __volatile__("ssm 0, %0" : "=r" (x) : : "memory") -#define local_irq_disable() __asm__ __volatile__("rsm %0,%%r0\n" : : "i" (PSW_I) : "memory" ) -#define local_irq_enable() __asm__ __volatile__("ssm %0,%%r0\n" : : "i" (PSW_I) : "memory" ) - -#define local_irq_save(x) \ - __asm__ __volatile__("rsm %1,%0" : "=r" (x) :"i" (PSW_I) : "memory" ) -#define local_irq_restore(x) \ - __asm__ __volatile__("mtsm %0" : : "r" (x) : "memory" ) - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - (flags & PSW_I) == 0; \ -}) - #define mfctl(reg) ({ \ unsigned long cr; \ __asm__ __volatile__( \ diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c index b1e5611b2ab1..349b5530d2c4 100644 --- a/arch/powerpc/boot/addnote.c +++ b/arch/powerpc/boot/addnote.c @@ -20,7 +20,7 @@ #include <string.h> /* CHRP note section */ -char arch[] = "PowerPC"; +static const char arch[] = "PowerPC"; #define N_DESCR 6 unsigned int descr[N_DESCR] = { @@ -33,7 +33,7 @@ unsigned int descr[N_DESCR] = { }; /* RPA note section */ -char rpaname[] = "IBM,RPA-Client-Config"; +static const char rpaname[] = "IBM,RPA-Client-Config"; /* * Note: setting ignore_my_client_config *should* mean that OF ignores diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts new file mode 100644 index 000000000000..9bb3d72c0e5a --- /dev/null +++ b/arch/powerpc/boot/dts/bluestone.dts @@ -0,0 +1,254 @@ +/* + * Device Tree for Bluestone (APM821xx) board. + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Tirumala R Marri <tmarri@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "apm,bluestone"; + compatible = "apm,bluestone"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,apm821xx"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-apm821xx"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-apm821xx"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-apm821xx"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal2"; + descriptor-memory = "ocm"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <1>; + num-rx-chans = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4 + }; + + POB0: opb { + compatible = "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>; + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x00400000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00180000>; + }; + partition@180000 { + label = "env"; + reg = <0x00180000 0x00020000>; + }; + partition@1a0000 { + label = "u-boot"; + reg = <0x001a0000 0x00060000>; + }; + }; + } + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii"; + reg = <0xef601500 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + EMAC0: ethernet@ef600c00 { + device_type = "network"; + compatible = "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 + /*Wake*/ 0x1 &UIC2 0x14 0x4>; + reg = <0xef600c00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <16384>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts new file mode 100644 index 000000000000..05a76ccfd499 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts @@ -0,0 +1,332 @@ +/* + * mpc8308_p1m Device Tree Source + * + * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "denx,mpc8308_p1m"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8308@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + ranges = <0x0 0x0 0xfc000000 0x04000000 + 0x1 0x0 0xfbff0000 0x00008000 + 0x2 0x0 0xfbff8000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; + read-only; + }; + env@60000 { + reg = <0x60000 0x20000>; + }; + env1@80000 { + reg = <0x80000 0x20000>; + }; + kernel@a0000 { + reg = <0xa0000 0x200000>; + }; + dtb@2a0000 { + reg = <0x2a0000 0x20000>; + }; + ramdisk@2c0000 { + reg = <0x2c0000 0x640000>; + }; + user@700000 { + reg = <0x700000 0x3900000>; + }; + }; + + can@1,0 { + compatible = "nxp,sja1000"; + reg = <0x1 0x0 0x80>; + interrupts = <18 0x8>; + interrups-parent = <&ipic>; + }; + + cpld@2,0 { + compatible = "denx,mpc8308_p1m-cpld"; + reg = <0x2 0x0 0x8>; + interrupts = <48 0x8>; + interrups-parent = <&ipic>; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8308-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + fram@50 { + compatible = "ramtron,24c64"; + reg = <0x50>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + pwm@28 { + compatible = "maxim,ds1050"; + reg = <0x28>; + }; + sensor@48 { + compatible = "maxim,max6625"; + reg = <0x48>; + }; + sensor@49 { + compatible = "maxim,max6625"; + reg = <0x49>; + }; + sensor@4b { + compatible = "maxim,max6625"; + reg = <0x4b>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy1 >; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy2 >; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + gpio@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x18>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + timer@500 { + compatible = "fsl,mpc8308-gtm", "fsl,gtm"; + reg = <0x500 0x100>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0x0 0x100>; + interrupts = < 0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8 >; + interrupt-parent = < &ipic >; + }; + + }; + + pci0: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000 + 0xb0000000 0x01000000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &ipic 1 8>; + interrupts = <0x1 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 815cebb2e3e5..a75c10eed269 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -108,6 +108,58 @@ }; }; + spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + fsl,espi-num-chipselects = <4>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + flash@1 { + compatible = "spansion,s25sl12801"; + reg = <1>; + spi-max-frequency = <40000000>; + }; + flash@2 { + compatible = "spansion,s25sl12801"; + reg = <2>; + spi-max-frequency = <40000000>; + }; + flash@3 { + compatible = "spansion,s25sl12801"; + reg = <3>; + spi-max-frequency = <40000000>; + }; + }; + dma@21300 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index 8bcb10b92677..2bbecbb4cbf9 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -148,6 +148,17 @@ label = "reserved-nand"; }; }; + + board-control@3,0 { + compatible = "fsl,p1022ds-pixis"; + reg = <3 0 0x30>; + interrupt-parent = <&mpic>; + /* + * IRQ8 is generated if the "EVENT" switch is pressed + * and PX_CTL[EVESEL] is set to 00. + */ + interrupts = <8 8>; + }; }; soc@fffe00000 { diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts index 2f0de24e3822..5b7fc29dd6cf 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -236,22 +236,19 @@ }; spi@110000 { - cell-index = <0>; #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,espi"; + compatible = "fsl,p4080-espi", "fsl,mpc8536-espi"; reg = <0x110000 0x1000>; interrupts = <53 0x2>; interrupt-parent = <&mpic>; - espi,num-ss-bits = <4>; - mode = "cpu"; + fsl,espi-num-chipselects = <4>; - fsl_m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,espi-flash"; + compatible = "spansion,s25sl12801"; reg = <0>; - linux,modalias = "fsl_m25p80"; spi-max-frequency = <40000000>; /* input clock */ partition@u-boot { label = "u-boot"; diff --git a/arch/powerpc/configs/44x/bluestone_defconfig b/arch/powerpc/configs/44x/bluestone_defconfig new file mode 100644 index 000000000000..ac65b48b8ccd --- /dev/null +++ b/arch/powerpc/configs/44x/bluestone_defconfig @@ -0,0 +1,68 @@ +CONFIG_44x=y +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_PCI_QUIRKS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_BLUESTONE=y +# CONFIG_EBONY is not set +# CONFIG_KVM_GUEST is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_SPARSE_IRQ=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=256 +CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_IBM_IIC=y +CONFIG_SENSORS_AD7414=y +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_M41T80=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_NLS=y diff --git a/arch/powerpc/configs/e55xx_smp_defconfig b/arch/powerpc/configs/e55xx_smp_defconfig new file mode 100644 index 000000000000..94d120ef99cf --- /dev/null +++ b/arch/powerpc/configs/e55xx_smp_defconfig @@ -0,0 +1,84 @@ +CONFIG_PPC64=y +CONFIG_PPC_BOOK3E_64=y +# CONFIG_VIRT_CPU_ACCOUNTING is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_P5020_DS=y +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BINFMT_MISC=m +CONFIG_SPARSE_IRQ=y +# CONFIG_PCI is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_EEPROM_LEGACY=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_I2C=y +# CONFIG_HWMON is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_DMADEVICES=y +CONFIG_FSL_DMA=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_UTF8=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_LIBCRC32C=m +CONFIG_FRAME_WARN=1024 +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_VIRQ_DEBUG=y +CONFIG_CRYPTO=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index cd446fba3fae..2fa05f7be4cb 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -12,6 +12,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BAMBOO=y +CONFIG_BLUESTONE=y CONFIG_SAM440EP=y CONFIG_SEQUOIA=y CONFIG_TAISHAN=y @@ -97,14 +98,17 @@ CONFIG_USB_STORAGE=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=m # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=m CONFIG_UBIFS_FS_XATTR=y +CONFIG_LOGFS=m CONFIG_CRAMFS=y +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_LZO=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y @@ -116,11 +120,8 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_VIRTUALIZATION=y diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig index 04ae0740b6d0..7bd1763877ba 100644 --- a/arch/powerpc/configs/ppc64e_defconfig +++ b/arch/powerpc/configs/ppc64e_defconfig @@ -18,6 +18,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_P5020_DS=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -256,7 +257,6 @@ CONFIG_HID_ZEROPLUS=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=m @@ -290,7 +290,6 @@ CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y -CONFIG_INOTIFY=y CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_UDF_FS=m @@ -384,7 +383,6 @@ CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_KHAZAD=m diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h index 7cdf358337cf..ce0c28495f9a 100644 --- a/arch/powerpc/include/asm/checksum.h +++ b/arch/powerpc/include/asm/checksum.h @@ -52,12 +52,22 @@ extern __wsum csum_partial(const void *buff, int len, __wsum sum); extern __wsum csum_partial_copy_generic(const void *src, void *dst, int len, __wsum sum, int *src_err, int *dst_err); + +#ifdef __powerpc64__ +#define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER +extern __wsum csum_and_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *err_ptr); +#define HAVE_CSUM_COPY_USER +extern __wsum csum_and_copy_to_user(const void *src, void __user *dst, + int len, __wsum sum, int *err_ptr); +#else /* * the same as csum_partial, but copies from src to dst while it * checksums. */ #define csum_partial_copy_from_user(src, dst, len, sum, errp) \ csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL) +#endif #define csum_partial_copy_nocheck(src, dst, len, sum) \ csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL) diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h index a11d4eac4f97..2296112e247b 100644 --- a/arch/powerpc/include/asm/compat.h +++ b/arch/powerpc/include/asm/compat.h @@ -143,7 +143,7 @@ static inline void __user *arch_compat_alloc_user_space(long len) * We cant access below the stack pointer in the 32bit ABI and * can access 288 bytes in the 64bit ABI */ - if (!(test_thread_flag(TIF_32BIT))) + if (!is_32bit_task()) usp -= 288; return (void __user *) (usp - len); @@ -213,7 +213,7 @@ struct compat_shmid64_ds { static inline int is_compat_task(void) { - return test_thread_flag(TIF_32BIT); + return is_32bit_task(); } #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 3a40a992e594..f3a1fdd9cf08 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -198,6 +198,7 @@ extern const char *powerpc_base_platform; #define CPU_FTR_CP_USE_DCBTZ LONG_ASM_CONST(0x0040000000000000) #define CPU_FTR_UNALIGNED_LD_STD LONG_ASM_CONST(0x0080000000000000) #define CPU_FTR_ASYM_SMT LONG_ASM_CONST(0x0100000000000000) +#define CPU_FTR_STCX_CHECKS_ADDRESS LONG_ASM_CONST(0x0200000000000000) #ifndef __ASSEMBLY__ @@ -392,28 +393,31 @@ extern const char *powerpc_base_platform; CPU_FTR_MMCRA | CPU_FTR_CTRL) #define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_MMCRA | CPU_FTR_CP_USE_DCBTZ) + CPU_FTR_MMCRA | CPU_FTR_CP_USE_DCBTZ | \ + CPU_FTR_STCX_CHECKS_ADDRESS) #define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA | \ - CPU_FTR_CP_USE_DCBTZ) + CPU_FTR_CP_USE_DCBTZ | CPU_FTR_STCX_CHECKS_ADDRESS) #define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR) + CPU_FTR_PURR | CPU_FTR_STCX_CHECKS_ADDRESS) #define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ - CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD) + CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \ + CPU_FTR_STCX_CHECKS_ADDRESS) #define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ - CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT) + CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \ + CPU_FTR_STCX_CHECKS_ADDRESS) #define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index 8c9c6ad2004e..6d2416a85709 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -127,19 +127,7 @@ static inline int dma_supported(struct device *dev, u64 mask) return dma_ops->dma_supported(dev, mask); } -static inline int dma_set_mask(struct device *dev, u64 dma_mask) -{ - struct dma_map_ops *dma_ops = get_dma_ops(dev); - - if (unlikely(dma_ops == NULL)) - return -EIO; - if (dma_ops->set_dma_mask != NULL) - return dma_ops->set_dma_mask(dev, dma_mask); - if (!dev->dma_mask || !dma_supported(dev, dma_mask)) - return -EIO; - *dev->dma_mask = dma_mask; - return 0; -} +extern int dma_set_mask(struct device *dev, u64 dma_mask); static inline void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index c376eda15313..2b917c69ed15 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -250,7 +250,7 @@ do { \ * the 64bit ABI has never had these issues dont enable the workaround * even if we have an executable stack. */ -# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \ +# define elf_read_implies_exec(ex, exec_stk) (is_32bit_task() ? \ (exec_stk == EXSTACK_DEFAULT) : 0) #else # define SET_PERSONALITY(ex) \ diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 57c400071995..7778d6f0c878 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -137,7 +137,8 @@ li r10,0; \ ld r11,exception_marker@toc(r2); \ std r10,RESULT(r1); /* clear regs->result */ \ - std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ + std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \ + ACCOUNT_STOLEN_TIME /* * Exception vectors. diff --git a/arch/powerpc/include/asm/fsl_85xx_cache_sram.h b/arch/powerpc/include/asm/fsl_85xx_cache_sram.h new file mode 100644 index 000000000000..2af2bdc37b2e --- /dev/null +++ b/arch/powerpc/include/asm/fsl_85xx_cache_sram.h @@ -0,0 +1,48 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * Cache SRAM handling for QorIQ platform + * + * Author: Vivek Mahajan <vivek.mahajan@freescale.com> + + * This file is derived from the original work done + * by Sylvain Munaut for the Bestcomm SRAM allocator. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_POWERPC_FSL_85XX_CACHE_SRAM_H__ +#define __ASM_POWERPC_FSL_85XX_CACHE_SRAM_H__ + +#include <asm/rheap.h> +#include <linux/spinlock.h> + +/* + * Cache-SRAM + */ + +struct mpc85xx_cache_sram { + phys_addr_t base_phys; + void *base_virt; + unsigned int size; + rh_info_t *rh; + spinlock_t lock; +}; + +extern void mpc85xx_cache_sram_free(void *ptr); +extern void *mpc85xx_cache_sram_alloc(unsigned int size, + phys_addr_t *phys, unsigned int align); + +#endif /* __AMS_POWERPC_FSL_85XX_CACHE_SRAM_H__ */ diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index bd100fcf40d0..ff08b70b36d4 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -16,42 +16,57 @@ extern void timer_interrupt(struct pt_regs *); #ifdef CONFIG_PPC64 #include <asm/paca.h> -static inline unsigned long local_get_flags(void) +static inline unsigned long arch_local_save_flags(void) { unsigned long flags; - __asm__ __volatile__("lbz %0,%1(13)" - : "=r" (flags) - : "i" (offsetof(struct paca_struct, soft_enabled))); + asm volatile( + "lbz %0,%1(13)" + : "=r" (flags) + : "i" (offsetof(struct paca_struct, soft_enabled))); return flags; } -static inline unsigned long raw_local_irq_disable(void) +static inline unsigned long arch_local_irq_disable(void) { unsigned long flags, zero; - __asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)" - : "=r" (flags), "=&r" (zero) - : "i" (offsetof(struct paca_struct, soft_enabled)) - : "memory"); + asm volatile( + "li %1,0; lbz %0,%2(13); stb %1,%2(13)" + : "=r" (flags), "=&r" (zero) + : "i" (offsetof(struct paca_struct, soft_enabled)) + : "memory"); return flags; } -extern void raw_local_irq_restore(unsigned long); +extern void arch_local_irq_restore(unsigned long); extern void iseries_handle_interrupts(void); -#define raw_local_irq_enable() raw_local_irq_restore(1) -#define raw_local_save_flags(flags) ((flags) = local_get_flags()) -#define raw_local_irq_save(flags) ((flags) = raw_local_irq_disable()) +static inline void arch_local_irq_enable(void) +{ + arch_local_irq_restore(1); +} + +static inline unsigned long arch_local_irq_save(void) +{ + return arch_local_irq_disable(); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return flags == 0; +} -#define raw_irqs_disabled() (local_get_flags() == 0) -#define raw_irqs_disabled_flags(flags) ((flags) == 0) +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} #ifdef CONFIG_PPC_BOOK3E -#define __hard_irq_enable() __asm__ __volatile__("wrteei 1": : :"memory"); -#define __hard_irq_disable() __asm__ __volatile__("wrteei 0": : :"memory"); +#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory"); +#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory"); #else #define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1) #define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1) @@ -64,64 +79,66 @@ extern void iseries_handle_interrupts(void); get_paca()->hard_enabled = 0; \ } while(0) -#else +#else /* CONFIG_PPC64 */ -#if defined(CONFIG_BOOKE) #define SET_MSR_EE(x) mtmsr(x) -#define raw_local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory") + +static inline unsigned long arch_local_save_flags(void) +{ + return mfmsr(); +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ +#if defined(CONFIG_BOOKE) + asm volatile("wrtee %0" : : "r" (flags) : "memory"); #else -#define SET_MSR_EE(x) mtmsr(x) -#define raw_local_irq_restore(flags) mtmsr(flags) + mtmsr(flags); #endif +} -static inline void raw_local_irq_disable(void) +static inline unsigned long arch_local_irq_save(void) { + unsigned long flags = arch_local_save_flags(); #ifdef CONFIG_BOOKE - __asm__ __volatile__("wrteei 0": : :"memory"); + asm volatile("wrteei 0" : : : "memory"); #else - unsigned long msr; - - msr = mfmsr(); - SET_MSR_EE(msr & ~MSR_EE); + SET_MSR_EE(flags & ~MSR_EE); #endif + return flags; } -static inline void raw_local_irq_enable(void) +static inline void arch_local_irq_disable(void) { #ifdef CONFIG_BOOKE - __asm__ __volatile__("wrteei 1": : :"memory"); + asm volatile("wrteei 0" : : : "memory"); #else - unsigned long msr; - - msr = mfmsr(); - SET_MSR_EE(msr | MSR_EE); + arch_local_irq_save(); #endif } -static inline void raw_local_irq_save_ptr(unsigned long *flags) +static inline void arch_local_irq_enable(void) { - unsigned long msr; - msr = mfmsr(); - *flags = msr; #ifdef CONFIG_BOOKE - __asm__ __volatile__("wrteei 0": : :"memory"); + asm volatile("wrteei 1" : : : "memory"); #else - SET_MSR_EE(msr & ~MSR_EE); + unsigned long msr = mfmsr(); + SET_MSR_EE(msr | MSR_EE); #endif } -#define raw_local_save_flags(flags) ((flags) = mfmsr()) -#define raw_local_irq_save(flags) raw_local_irq_save_ptr(&flags) -#define raw_irqs_disabled() ((mfmsr() & MSR_EE) == 0) -#define raw_irqs_disabled_flags(flags) (((flags) & MSR_EE) == 0) - -#define hard_irq_disable() raw_local_irq_disable() - -static inline int irqs_disabled_flags(unsigned long flags) +static inline bool arch_irqs_disabled_flags(unsigned long flags) { return (flags & MSR_EE) == 0; } +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#define hard_irq_disable() arch_local_irq_disable() + #endif /* CONFIG_PPC64 */ /* diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h index 5f68ecfdf516..b85d8ddbb666 100644 --- a/arch/powerpc/include/asm/irqflags.h +++ b/arch/powerpc/include/asm/irqflags.h @@ -6,7 +6,7 @@ #ifndef __ASSEMBLY__ /* - * Get definitions for raw_local_save_flags(x), etc. + * Get definitions for arch_local_save_flags(x), etc. */ #include <asm/hw_irq.h> diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h index 076327f2eff7..f54408d995b5 100644 --- a/arch/powerpc/include/asm/kexec.h +++ b/arch/powerpc/include/asm/kexec.h @@ -91,6 +91,7 @@ extern void machine_kexec_simple(struct kimage *image); extern void crash_kexec_secondary(struct pt_regs *regs); extern int overlaps_crashkernel(unsigned long start, unsigned long size); extern void reserve_crashkernel(void); +extern void machine_kexec_mask_interrupts(void); #else /* !CONFIG_KEXEC */ static inline int kexec_sr_activated(int cpu) { return 0; } diff --git a/arch/powerpc/include/asm/kvm_fpu.h b/arch/powerpc/include/asm/kvm_fpu.h index c3d4f0518a67..92daae132492 100644 --- a/arch/powerpc/include/asm/kvm_fpu.h +++ b/arch/powerpc/include/asm/kvm_fpu.h @@ -82,7 +82,7 @@ FPD_THREE_IN(fmadd) FPD_THREE_IN(fnmsub) FPD_THREE_IN(fnmadd) -extern void kvm_cvt_fd(u32 *from, u64 *to, u64 *fpscr); -extern void kvm_cvt_df(u64 *from, u32 *to, u64 *fpscr); +extern void kvm_cvt_fd(u32 *from, u64 *to); +extern void kvm_cvt_df(u64 *from, u32 *to); #endif diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h index 14b592dfb4e8..7f5e0fefebb0 100644 --- a/arch/powerpc/include/asm/lppaca.h +++ b/arch/powerpc/include/asm/lppaca.h @@ -153,6 +153,8 @@ struct lppaca { extern struct lppaca lppaca[]; +#define lppaca_of(cpu) (*paca[cpu].lppaca_ptr) + /* * SLB shadow buffer structure as defined in the PAPR. The save_area * contains adjacent ESID and VSID pairs for each shadowed SLB. The @@ -170,6 +172,33 @@ struct slb_shadow { extern struct slb_shadow slb_shadow[]; +/* + * Layout of entries in the hypervisor's dispatch trace log buffer. + */ +struct dtl_entry { + u8 dispatch_reason; + u8 preempt_reason; + u16 processor_id; + u32 enqueue_to_dispatch_time; + u32 ready_to_enqueue_time; + u32 waiting_to_ready_time; + u64 timebase; + u64 fault_addr; + u64 srr0; + u64 srr1; +}; + +#define DISPATCH_LOG_BYTES 4096 /* bytes per cpu */ +#define N_DISPATCH_LOG (DISPATCH_LOG_BYTES / sizeof(struct dtl_entry)) + +/* + * When CONFIG_VIRT_CPU_ACCOUNTING = y, the cpu accounting code controls + * reading from the dispatch trace log. If other code wants to consume + * DTL entries, it can set this pointer to a function that will get + * called once for each DTL entry that gets processed. + */ +extern void (*dtl_consumer)(struct dtl_entry *entry, u64 index); + #endif /* CONFIG_PPC_BOOK3S */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_LPPACA_H */ diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index adc8e6cdf339..d045b0145537 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -102,6 +102,9 @@ struct machdep_calls { void (*pci_dma_dev_setup)(struct pci_dev *dev); void (*pci_dma_bus_setup)(struct pci_bus *bus); + /* Platform set_dma_mask override */ + int (*dma_set_mask)(struct device *dev, u64 dma_mask); + int (*probe)(void); void (*setup_arch)(void); /* Optional, may be NULL */ void (*init_early)(void); diff --git a/arch/powerpc/include/asm/memblock.h b/arch/powerpc/include/asm/memblock.h index 3c29728b56b1..43efc345065e 100644 --- a/arch/powerpc/include/asm/memblock.h +++ b/arch/powerpc/include/asm/memblock.h @@ -5,11 +5,4 @@ #define MEMBLOCK_DBG(fmt...) udbg_printf(fmt) -#ifdef CONFIG_PPC32 -extern phys_addr_t lowmem_end_addr; -#define MEMBLOCK_REAL_LIMIT lowmem_end_addr -#else -#define MEMBLOCK_REAL_LIMIT 0 -#endif - #endif /* _ASM_POWERPC_MEMBLOCK_H */ diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 87a1d787c5b6..8eaed81ea642 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -114,6 +114,17 @@ #define MAS7_RPN 0xFFFFFFFF +/* Bit definitions for MMUCFG */ +#define MMUCFG_MAVN 0x00000003 /* MMU Architecture Version Number */ +#define MMUCFG_MAVN_V1 0x00000000 /* v1.0 */ +#define MMUCFG_MAVN_V2 0x00000001 /* v2.0 */ +#define MMUCFG_NTLBS 0x0000000c /* Number of TLBs */ +#define MMUCFG_PIDSIZE 0x000007c0 /* PID Reg Size */ +#define MMUCFG_TWC 0x00008000 /* TLB Write Conditional (v2.0) */ +#define MMUCFG_LRAT 0x00010000 /* LRAT Supported (v2.0) */ +#define MMUCFG_RASIZE 0x00fe0000 /* Real Addr Size */ +#define MMUCFG_LPIDSIZE 0x0f000000 /* LPID Reg Size */ + /* Bit definitions for MMUCSR0 */ #define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */ #define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */ @@ -133,6 +144,10 @@ #define TLBnCFG_GTWE 0x00010000 /* Guest can write */ #define TLBnCFG_IND 0x00020000 /* IND entries supported */ #define TLBnCFG_PT 0x00040000 /* Can load from page table */ +#define TLBnCFG_MINSIZE 0x00f00000 /* Minimum Page Size (v1.0) */ +#define TLBnCFG_MINSIZE_SHIFT 20 +#define TLBnCFG_MAXSIZE 0x000f0000 /* Maximum Page Size (v1.0) */ +#define TLBnCFG_MAXSIZE_SHIFT 16 #define TLBnCFG_ASSOC 0xff000000 /* Associativity */ /* TLBnPS encoding */ diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 7ebf42ed84a2..bb40a06d3b77 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -2,6 +2,8 @@ #define _ASM_POWERPC_MMU_H_ #ifdef __KERNEL__ +#include <linux/types.h> + #include <asm/asm-compat.h> #include <asm/feature-fixups.h> @@ -82,6 +84,16 @@ extern unsigned int __start___mmu_ftr_fixup, __stop___mmu_ftr_fixup; extern void early_init_mmu(void); extern void early_init_mmu_secondary(void); +extern void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size); + +#ifdef CONFIG_PPC64 +/* This is our real memory area size on ppc64 server, on embedded, we + * make it match the size our of bolted TLB area + */ +extern u64 ppc64_rma_size; +#endif /* CONFIG_PPC64 */ + #endif /* !__ASSEMBLY__ */ /* The kernel use the constants below to index in the page sizes array. diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 9b287fdd8ea3..ec57540cd7af 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -85,6 +85,8 @@ struct paca_struct { u8 kexec_state; /* set when kexec down has irqs off */ #ifdef CONFIG_PPC_STD_MMU_64 struct slb_shadow *slb_shadow_ptr; + struct dtl_entry *dispatch_log; + struct dtl_entry *dispatch_log_end; /* * Now, starting in cacheline 2, the exception save areas @@ -134,8 +136,14 @@ struct paca_struct { /* Stuff for accurate time accounting */ u64 user_time; /* accumulated usermode TB ticks */ u64 system_time; /* accumulated system TB ticks */ - u64 startpurr; /* PURR/TB value snapshot */ + u64 user_time_scaled; /* accumulated usermode SPURR ticks */ + u64 starttime; /* TB value snapshot */ + u64 starttime_user; /* TB value on exit to usermode */ u64 startspurr; /* SPURR value snapshot */ + u64 utime_sspurr; /* ->user_time when ->startspurr set */ + u64 stolen_time; /* TB ticks taken by hypervisor */ + u64 dtl_ridx; /* read index in dispatch log */ + struct dtl_entry *dtl_curr; /* pointer corresponding to dtl_ridx */ #ifdef CONFIG_KVM_BOOK3S_HANDLER /* We use this to store guest state in */ diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h index 358ff14ea25e..932f88dcf6fa 100644 --- a/arch/powerpc/include/asm/page_64.h +++ b/arch/powerpc/include/asm/page_64.h @@ -163,7 +163,7 @@ do { \ #endif /* !CONFIG_HUGETLB_PAGE */ #define VM_DATA_DEFAULT_FLAGS \ - (test_thread_flag(TIF_32BIT) ? \ + (is_32bit_task() ? \ VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64) /* @@ -179,7 +179,7 @@ do { \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) #define VM_STACK_DEFAULT_FLAGS \ - (test_thread_flag(TIF_32BIT) ? \ + (is_32bit_task() ? \ VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64) #include <asm-generic/getorder.h> diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index 42fdff0e4b32..43268f15004e 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -28,8 +28,8 @@ extern void find_and_init_phbs(void); extern struct pci_dev *isa_bridge_pcidev; /* may be NULL if no ISA bus */ /** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ -#define BUID_HI(buid) ((buid) >> 32) -#define BUID_LO(buid) ((buid) & 0xffffffff) +#define BUID_HI(buid) upper_32_bits(buid) +#define BUID_LO(buid) lower_32_bits(buid) /* PCI device_node operations */ struct device_node; diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 498fe09263d3..98210067c1cc 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -9,6 +9,7 @@ #include <asm/asm-compat.h> #include <asm/processor.h> #include <asm/ppc-opcode.h> +#include <asm/firmware.h> #ifndef __ASSEMBLY__ #error __FILE__ should only be used in assembler files @@ -26,17 +27,13 @@ #ifndef CONFIG_VIRT_CPU_ACCOUNTING #define ACCOUNT_CPU_USER_ENTRY(ra, rb) #define ACCOUNT_CPU_USER_EXIT(ra, rb) +#define ACCOUNT_STOLEN_TIME #else #define ACCOUNT_CPU_USER_ENTRY(ra, rb) \ beq 2f; /* if from kernel mode */ \ -BEGIN_FTR_SECTION; \ - mfspr ra,SPRN_PURR; /* get processor util. reg */ \ -END_FTR_SECTION_IFSET(CPU_FTR_PURR); \ -BEGIN_FTR_SECTION; \ - MFTB(ra); /* or get TB if no PURR */ \ -END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ - ld rb,PACA_STARTPURR(r13); \ - std ra,PACA_STARTPURR(r13); \ + MFTB(ra); /* get timebase */ \ + ld rb,PACA_STARTTIME_USER(r13); \ + std ra,PACA_STARTTIME(r13); \ subf rb,rb,ra; /* subtract start value */ \ ld ra,PACA_USER_TIME(r13); \ add ra,ra,rb; /* add on to user time */ \ @@ -44,19 +41,34 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ 2: #define ACCOUNT_CPU_USER_EXIT(ra, rb) \ -BEGIN_FTR_SECTION; \ - mfspr ra,SPRN_PURR; /* get processor util. reg */ \ -END_FTR_SECTION_IFSET(CPU_FTR_PURR); \ -BEGIN_FTR_SECTION; \ - MFTB(ra); /* or get TB if no PURR */ \ -END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ - ld rb,PACA_STARTPURR(r13); \ - std ra,PACA_STARTPURR(r13); \ + MFTB(ra); /* get timebase */ \ + ld rb,PACA_STARTTIME(r13); \ + std ra,PACA_STARTTIME_USER(r13); \ subf rb,rb,ra; /* subtract start value */ \ ld ra,PACA_SYSTEM_TIME(r13); \ - add ra,ra,rb; /* add on to user time */ \ - std ra,PACA_SYSTEM_TIME(r13); -#endif + add ra,ra,rb; /* add on to system time */ \ + std ra,PACA_SYSTEM_TIME(r13) + +#ifdef CONFIG_PPC_SPLPAR +#define ACCOUNT_STOLEN_TIME \ +BEGIN_FW_FTR_SECTION; \ + beq 33f; \ + /* from user - see if there are any DTL entries to process */ \ + ld r10,PACALPPACAPTR(r13); /* get ptr to VPA */ \ + ld r11,PACA_DTL_RIDX(r13); /* get log read index */ \ + ld r10,LPPACA_DTLIDX(r10); /* get log write index */ \ + cmpd cr1,r11,r10; \ + beq+ cr1,33f; \ + bl .accumulate_stolen_time; \ +33: \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) + +#else /* CONFIG_PPC_SPLPAR */ +#define ACCOUNT_STOLEN_TIME + +#endif /* CONFIG_PPC_SPLPAR */ + +#endif /* CONFIG_VIRT_CPU_ACCOUNTING */ /* * Macros for storing registers into and loading registers from diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 19c05b0f74be..4c14187ba02d 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -118,7 +118,7 @@ extern struct task_struct *last_task_used_spe; #define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4)) #define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4)) -#define TASK_UNMAPPED_BASE ((test_thread_flag(TIF_32BIT)) ? \ +#define TASK_UNMAPPED_BASE ((is_32bit_task()) ? \ TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 ) #endif @@ -128,7 +128,7 @@ extern struct task_struct *last_task_used_spe; #define STACK_TOP_USER64 TASK_SIZE_USER64 #define STACK_TOP_USER32 TASK_SIZE_USER32 -#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \ +#define STACK_TOP (is_32bit_task() ? \ STACK_TOP_USER32 : STACK_TOP_USER64) #define STACK_TOP_MAX STACK_TOP_USER64 diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h index f2b370180a09..76bb195e4f24 100644 --- a/arch/powerpc/include/asm/pte-common.h +++ b/arch/powerpc/include/asm/pte-common.h @@ -171,6 +171,13 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); /* Make modules code happy. We don't set RO yet */ #define PAGE_KERNEL_EXEC PAGE_KERNEL_X +/* + * Don't just check for any non zero bits in __PAGE_USER, since for book3e + * and PTE_64BIT, PAGE_KERNEL_X contains _PAGE_BAP_SR which is also in + * _PAGE_USER. Need to explictly match _PAGE_BAP_UR bit in that case too. + */ +#define pte_user(val) ((val & _PAGE_USER) == _PAGE_USER) + /* Advertise special mapping type for AGP */ #define PAGE_AGP (PAGE_KERNEL_NC) #define HAVE_PAGE_AGP diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index 3d35f8ae377e..9a1193e30f26 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -187,6 +187,7 @@ extern void rtas_progress(char *s, unsigned short hex); extern void rtas_initialize(void); extern int rtas_suspend_cpu(struct rtas_suspend_me_data *data); extern int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data); +extern int rtas_ibm_suspend_me(struct rtas_args *); struct rtc_time; extern unsigned long rtas_get_boot_time(void); diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index 3d212669a130..aa0f1ebb4aaf 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -329,3 +329,22 @@ COMPAT_SYS(rt_tgsigqueueinfo) SYSCALL(fanotify_init) COMPAT_SYS(fanotify_mark) SYSCALL_SPU(prlimit64) +SYSCALL_SPU(socket) +SYSCALL_SPU(bind) +SYSCALL_SPU(connect) +SYSCALL_SPU(listen) +SYSCALL_SPU(accept) +SYSCALL_SPU(getsockname) +SYSCALL_SPU(getpeername) +SYSCALL_SPU(socketpair) +SYSCALL_SPU(send) +SYSCALL_SPU(sendto) +COMPAT_SYS_SPU(recv) +COMPAT_SYS_SPU(recvfrom) +SYSCALL_SPU(shutdown) +COMPAT_SYS_SPU(setsockopt) +COMPAT_SYS_SPU(getsockopt) +COMPAT_SYS_SPU(sendmsg) +COMPAT_SYS_SPU(recvmsg) +COMPAT_SYS_SPU(recvmmsg) +SYSCALL_SPU(accept4) diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h index 9c3d160670b4..5e474ddd2273 100644 --- a/arch/powerpc/include/asm/system.h +++ b/arch/powerpc/include/asm/system.h @@ -154,8 +154,8 @@ extern void enable_kernel_spe(void); extern void giveup_spe(struct task_struct *); extern void load_up_spe(struct task_struct *); extern int fix_alignment(struct pt_regs *); -extern void cvt_fd(float *from, double *to, struct thread_struct *thread); -extern void cvt_df(double *from, float *to, struct thread_struct *thread); +extern void cvt_fd(float *from, double *to); +extern void cvt_df(double *from, float *to); #ifndef CONFIG_SMP extern void discard_lazy_cpu_state(void); diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h index dc779dfcf258..fe6f7c2c9c68 100644 --- a/arch/powerpc/include/asm/time.h +++ b/arch/powerpc/include/asm/time.h @@ -34,7 +34,6 @@ extern void to_tm(int tim, struct rtc_time * tm); extern void GregorianDay(struct rtc_time *tm); extern void generic_calibrate_decr(void); -extern void snapshot_timebase(void); extern void set_dec_cpu6(unsigned int val); @@ -212,12 +211,8 @@ struct cpu_usage { DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array); #if defined(CONFIG_VIRT_CPU_ACCOUNTING) -extern void calculate_steal_time(void); -extern void snapshot_timebases(void); #define account_process_vtime(tsk) account_process_tick(tsk, 0) #else -#define calculate_steal_time() do { } while (0) -#define snapshot_timebases() do { } while (0) #define account_process_vtime(tsk) do { } while (0) #endif diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 597e6f9d094a..6151937657f6 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -348,10 +348,29 @@ #define __NR_fanotify_init 323 #define __NR_fanotify_mark 324 #define __NR_prlimit64 325 +#define __NR_socket 326 +#define __NR_bind 327 +#define __NR_connect 328 +#define __NR_listen 329 +#define __NR_accept 330 +#define __NR_getsockname 331 +#define __NR_getpeername 332 +#define __NR_socketpair 333 +#define __NR_send 334 +#define __NR_sendto 335 +#define __NR_recv 336 +#define __NR_recvfrom 337 +#define __NR_shutdown 338 +#define __NR_setsockopt 339 +#define __NR_getsockopt 340 +#define __NR_sendmsg 341 +#define __NR_recvmsg 342 +#define __NR_recvmmsg 343 +#define __NR_accept4 344 #ifdef __KERNEL__ -#define __NR_syscalls 326 +#define __NR_syscalls 345 #define __NR__exit __NR_exit #define NR_syscalls __NR_syscalls diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 1dda70129141..4ed076a4db24 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -55,7 +55,9 @@ obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_IBMEBUS) += ibmebus.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +ifeq ($(CONFIG_PPC32),y) obj-$(CONFIG_E500) += idle_e500.o +endif obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o obj-$(CONFIG_TAU) += tau_6xx.o obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o @@ -67,7 +69,7 @@ endif obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o -obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o +obj-$(CONFIG_PPC_FSL_BOOK3E) += cpu_setup_fsl_booke.o dbell.o obj-$(CONFIG_PPC_BOOK3E_64) += dbell.o extra-y := head_$(CONFIG_WORD_SIZE).o diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index b876e989220b..8184ee97e484 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -889,7 +889,7 @@ int fix_alignment(struct pt_regs *regs) #ifdef CONFIG_PPC_FPU preempt_disable(); enable_kernel_fp(); - cvt_df(&data.dd, (float *)&data.v[4], ¤t->thread); + cvt_df(&data.dd, (float *)&data.v[4]); preempt_enable(); #else return 0; @@ -933,7 +933,7 @@ int fix_alignment(struct pt_regs *regs) #ifdef CONFIG_PPC_FPU preempt_disable(); enable_kernel_fp(); - cvt_fd((float *)&data.v[4], &data.dd, ¤t->thread); + cvt_fd((float *)&data.v[4], &data.dd); preempt_enable(); #else return 0; diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 1c0607ddccc0..c3e01945ad4f 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -61,7 +61,7 @@ #endif #endif -#if defined(CONFIG_FSL_BOOKE) +#if defined(CONFIG_PPC_FSL_BOOK3E) #include "../mm/mmu_decl.h" #endif @@ -181,17 +181,19 @@ int main(void) offsetof(struct slb_shadow, save_area[SLB_NUM_BOLTED - 1].vsid)); DEFINE(SLBSHADOW_STACKESID, offsetof(struct slb_shadow, save_area[SLB_NUM_BOLTED - 1].esid)); + DEFINE(SLBSHADOW_SAVEAREA, offsetof(struct slb_shadow, save_area)); DEFINE(LPPACASRR0, offsetof(struct lppaca, saved_srr0)); DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1)); DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int)); DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int)); - DEFINE(SLBSHADOW_SAVEAREA, offsetof(struct slb_shadow, save_area)); + DEFINE(LPPACA_DTLIDX, offsetof(struct lppaca, dtl_idx)); + DEFINE(PACA_DTL_RIDX, offsetof(struct paca_struct, dtl_ridx)); #endif /* CONFIG_PPC_STD_MMU_64 */ DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp)); DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state)); - DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr)); - DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr)); + DEFINE(PACA_STARTTIME, offsetof(struct paca_struct, starttime)); + DEFINE(PACA_STARTTIME_USER, offsetof(struct paca_struct, starttime_user)); DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time)); DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time)); DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save)); @@ -468,7 +470,7 @@ int main(void) DEFINE(PGD_T_LOG2, PGD_T_LOG2); DEFINE(PTE_T_LOG2, PTE_T_LOG2); #endif -#ifdef CONFIG_FSL_BOOKE +#ifdef CONFIG_PPC_FSL_BOOK3E DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam)); DEFINE(TLBCAM_MAS0, offsetof(struct tlbcam, MAS0)); DEFINE(TLBCAM_MAS1, offsetof(struct tlbcam, MAS1)); diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S index 7d606f89a839..e32b4a9a2c22 100644 --- a/arch/powerpc/kernel/cpu_setup_44x.S +++ b/arch/powerpc/kernel/cpu_setup_44x.S @@ -35,6 +35,7 @@ _GLOBAL(__setup_cpu_440grx) _GLOBAL(__setup_cpu_460ex) _GLOBAL(__setup_cpu_460gt) _GLOBAL(__setup_cpu_460sx) +_GLOBAL(__setup_cpu_apm821xx) mflr r4 bl __init_fpu_44x bl __fixup_440A_mcheck diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index 0adb50ad8031..894e64fa481e 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -51,6 +51,7 @@ _GLOBAL(__e500_dcache_setup) isync blr +#ifdef CONFIG_PPC32 _GLOBAL(__setup_cpu_e200) /* enable dedicated debug exception handling resources (Debug APU) */ mfspr r3,SPRN_HID0 @@ -72,3 +73,17 @@ _GLOBAL(__setup_cpu_e500mc) bl __setup_e500mc_ivors mtlr r4 blr +#endif +/* Right now, restore and setup are the same thing */ +_GLOBAL(__restore_cpu_e5500) +_GLOBAL(__setup_cpu_e5500) + mflr r4 + bl __e500_icache_setup + bl __e500_dcache_setup +#ifdef CONFIG_PPC_BOOK3E_64 + bl .__setup_base_ivors +#else + bl __setup_e500mc_ivors +#endif + mtlr r4 + blr diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 1f9123f412ec..96a908f1cd87 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -48,6 +48,7 @@ extern void __setup_cpu_440x5(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_460sx(unsigned long offset, struct cpu_spec *spec); +extern void __setup_cpu_apm821xx(unsigned long offset, struct cpu_spec *spec); extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec); @@ -66,6 +67,10 @@ extern void __restore_cpu_ppc970(void); extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec); extern void __restore_cpu_power7(void); #endif /* CONFIG_PPC64 */ +#if defined(CONFIG_E500) +extern void __setup_cpu_e5500(unsigned long offset, struct cpu_spec* spec); +extern void __restore_cpu_e5500(void); +#endif /* CONFIG_E500 */ /* This table only contains "desktop" CPUs, it need to be filled with embedded * ones as well... @@ -1805,6 +1810,20 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, + { /* 464 in APM821xx */ + .pvr_mask = 0xffffff00, + .pvr_value = 0x12C41C80, + .cpu_name = "APM821XX", + .cpu_features = CPU_FTRS_44X, + .cpu_user_features = COMMON_USER_BOOKE | + PPC_FEATURE_HAS_FPU, + .mmu_features = MMU_FTR_TYPE_44x, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_apm821xx, + .machine_check = machine_check_440A, + .platform = "ppc440", + }, { /* 476 core */ .pvr_mask = 0xffff0000, .pvr_value = 0x11a50000, @@ -1891,7 +1910,9 @@ static struct cpu_spec __initdata cpu_specs[] = { .platform = "ppc5554", } #endif /* CONFIG_E200 */ +#endif /* CONFIG_PPC32 */ #ifdef CONFIG_E500 +#ifdef CONFIG_PPC32 { /* e500 */ .pvr_mask = 0xffff0000, .pvr_value = 0x80200000, @@ -1946,6 +1967,26 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_e500mc, .platform = "ppce500mc", }, +#endif /* CONFIG_PPC32 */ + { /* e5500 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x80240000, + .cpu_name = "e5500", + .cpu_features = CPU_FTRS_E500MC, + .cpu_user_features = COMMON_USER_BOOKE, + .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | + MMU_FTR_USE_TLBILX, + .icache_bsize = 64, + .dcache_bsize = 64, + .num_pmcs = 4, + .oprofile_cpu_type = "ppc/e500mc", + .oprofile_type = PPC_OPROFILE_FSL_EMB, + .cpu_setup = __setup_cpu_e5500, + .cpu_restore = __restore_cpu_e5500, + .machine_check = machine_check_e500mc, + .platform = "ppce5500", + }, +#ifdef CONFIG_PPC32 { /* default match */ .pvr_mask = 0x00000000, .pvr_value = 0x00000000, @@ -1960,8 +2001,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_e500, .platform = "powerpc", } -#endif /* CONFIG_E500 */ #endif /* CONFIG_PPC32 */ +#endif /* CONFIG_E500 */ #ifdef CONFIG_PPC_BOOK3E_64 { /* This is a default entry to get going, to be replaced by diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 4457382f8667..832c8c4db254 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -414,18 +414,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs) crash_kexec_wait_realmode(crashing_cpu); #endif - for_each_irq(i) { - struct irq_desc *desc = irq_to_desc(i); - - if (!desc || !desc->chip || !desc->chip->eoi) - continue; - - if (desc->status & IRQ_INPROGRESS) - desc->chip->eoi(i); - - if (!(desc->status & IRQ_DISABLED)) - desc->chip->shutdown(i); - } + machine_kexec_mask_interrupts(); /* * Call registered shutdown routines savely. Swap out diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 37771a518119..6e54a0fd31aa 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -74,16 +74,17 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) { struct iommu_table *tbl = get_iommu_table_base(dev); - if (!tbl || tbl->it_offset > mask) { - printk(KERN_INFO - "Warning: IOMMU offset too big for device mask\n"); - if (tbl) - printk(KERN_INFO - "mask: 0x%08llx, table offset: 0x%08lx\n", - mask, tbl->it_offset); - else - printk(KERN_INFO "mask: 0x%08llx, table unavailable\n", - mask); + if (!tbl) { + dev_info(dev, "Warning: IOMMU dma not supported: mask 0x%08llx" + ", table unavailable\n", mask); + return 0; + } + + if ((tbl->it_offset + tbl->it_size) > (mask >> IOMMU_PAGE_SHIFT)) { + dev_info(dev, "Warning: IOMMU window too big for device mask\n"); + dev_info(dev, "mask: 0x%08llx, table end: 0x%08lx\n", + mask, (tbl->it_offset + tbl->it_size) << + IOMMU_PAGE_SHIFT); return 0; } else return 1; diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 84d6367ec003..cf02cad62d9a 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -12,6 +12,7 @@ #include <linux/memblock.h> #include <asm/bug.h> #include <asm/abs_addr.h> +#include <asm/machdep.h> /* * Generic direct DMA implementation @@ -89,7 +90,7 @@ static int dma_direct_dma_supported(struct device *dev, u64 mask) /* Could be improved so platforms can set the limit in case * they have limited DMA windows */ - return mask >= (memblock_end_of_DRAM() - 1); + return mask >= get_dma_offset(dev) + (memblock_end_of_DRAM() - 1); #else return 1; #endif @@ -154,6 +155,23 @@ EXPORT_SYMBOL(dma_direct_ops); #define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) +int dma_set_mask(struct device *dev, u64 dma_mask) +{ + struct dma_map_ops *dma_ops = get_dma_ops(dev); + + if (ppc_md.dma_set_mask) + return ppc_md.dma_set_mask(dev, dma_mask); + if (unlikely(dma_ops == NULL)) + return -EIO; + if (dma_ops->set_dma_mask != NULL) + return dma_ops->set_dma_mask(dev, dma_mask); + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + *dev->dma_mask = dma_mask; + return 0; +} +EXPORT_SYMBOL(dma_set_mask); + static int __init dma_init(void) { dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 42e9d908914a..d82878c4daa6 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -97,6 +97,24 @@ system_call_common: addi r9,r1,STACK_FRAME_OVERHEAD ld r11,exception_marker@toc(r2) std r11,-16(r9) /* "regshere" marker */ +#if defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(CONFIG_PPC_SPLPAR) +BEGIN_FW_FTR_SECTION + beq 33f + /* if from user, see if there are any DTL entries to process */ + ld r10,PACALPPACAPTR(r13) /* get ptr to VPA */ + ld r11,PACA_DTL_RIDX(r13) /* get log read index */ + ld r10,LPPACA_DTLIDX(r10) /* get log write index */ + cmpd cr1,r11,r10 + beq+ cr1,33f + bl .accumulate_stolen_time + REST_GPR(0,r1) + REST_4GPRS(3,r1) + REST_2GPRS(7,r1) + addi r9,r1,STACK_FRAME_OVERHEAD +33: +END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) +#endif /* CONFIG_VIRT_CPU_ACCOUNTING && CONFIG_PPC_SPLPAR */ + #ifdef CONFIG_TRACE_IRQFLAGS bl .trace_hardirqs_on REST_GPR(0,r1) @@ -202,7 +220,9 @@ syscall_exit: bge- syscall_error syscall_error_cont: ld r7,_NIP(r1) +BEGIN_FTR_SECTION stdcx. r0,0,r1 /* to clear the reservation */ +END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) andi. r6,r8,MSR_PR ld r4,_LINK(r1) /* @@ -419,6 +439,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) sync #endif /* CONFIG_SMP */ + /* + * If we optimise away the clear of the reservation in system + * calls because we know the CPU tracks the address of the + * reservation, then we need to clear it here to cover the + * case that the kernel context switch path has no larx + * instructions. + */ +BEGIN_FTR_SECTION + ldarx r6,0,r1 +END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS) + addi r6,r4,-THREAD /* Convert THREAD to 'current' */ std r6,PACACURRENT(r13) /* Set new 'current' */ @@ -576,7 +607,16 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) andi. r0,r3,MSR_RI beq- unrecov_restore + /* + * Clear the reservation. If we know the CPU tracks the address of + * the reservation then we can potentially save some cycles and use + * a larx. On POWER6 and POWER7 this is significantly faster. + */ +BEGIN_FTR_SECTION stdcx. r0,0,r1 /* to clear the reservation */ +FTR_SECTION_ELSE + ldarx r4,0,r1 +ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) /* * Clear RI before restoring r13. If we are returning to diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index f53029a01554..39b0c48872d2 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -818,12 +818,12 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) /* * hash_page couldn't handle it, set soft interrupt enable back - * to what it was before the trap. Note that .raw_local_irq_restore + * to what it was before the trap. Note that .arch_local_irq_restore * handles any interrupts pending at this point. */ ld r3,SOFTE(r1) TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f) - bl .raw_local_irq_restore + bl .arch_local_irq_restore b 11f /* We have a data breakpoint exception - handle it */ diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index fc8f5b14019c..e86c040ae585 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -163,24 +163,14 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) /* * These are used in the alignment trap handler when emulating * single-precision loads and stores. - * We restore and save the fpscr so the task gets the same result - * and exceptions as if the cpu had performed the load or store. */ _GLOBAL(cvt_fd) - lfd 0,THREAD_FPSCR(r5) /* load up fpscr value */ - MTFSF_L(0) lfs 0,0(r3) stfd 0,0(r4) - mffs 0 - stfd 0,THREAD_FPSCR(r5) /* save new fpscr value */ blr _GLOBAL(cvt_df) - lfd 0,THREAD_FPSCR(r5) /* load up fpscr value */ - MTFSF_L(0) lfd 0,0(r3) stfs 0,0(r4) - mffs 0 - stfd 0,THREAD_FPSCR(r5) /* save new fpscr value */ blr diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index a90625f9b485..8278e8bad5a0 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -923,11 +923,7 @@ initial_mmu: mtspr SPRN_PID,r0 sync - /* Configure and load two entries into TLB slots 62 and 63. - * In case we are pinning TLBs, these are reserved in by the - * other TLB functions. If not reserving, then it doesn't - * matter where they are loaded. - */ + /* Configure and load one entry into TLB slots 63 */ clrrwi r4,r4,10 /* Mask off the real page number */ ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */ diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 4faeba247854..529b817f473b 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -152,8 +152,11 @@ _ENTRY(__early_start) /* Check to see if we're the second processor, and jump * to the secondary_start code if so */ - mfspr r24,SPRN_PIR - cmpwi r24,0 + lis r24, boot_cpuid@h + ori r24, r24, boot_cpuid@l + lwz r24, 0(r24) + cmpwi r24, -1 + mfspr r24,SPRN_PIR bne __secondary_start #endif @@ -175,6 +178,9 @@ _ENTRY(__early_start) li r0,0 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) + rlwinm r22,r1,0,0,31-THREAD_SHIFT /* current thread_info */ + stw r24, TI_CPU(r22) + bl early_init #ifdef CONFIG_RELOCATABLE diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 4a65386995d7..ce557f6f00fc 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -116,7 +116,7 @@ static inline notrace void set_soft_enabled(unsigned long enable) : : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled))); } -notrace void raw_local_irq_restore(unsigned long en) +notrace void arch_local_irq_restore(unsigned long en) { /* * get_paca()->soft_enabled = en; @@ -192,7 +192,7 @@ notrace void raw_local_irq_restore(unsigned long en) __hard_irq_enable(); } -EXPORT_SYMBOL(raw_local_irq_restore); +EXPORT_SYMBOL(arch_local_irq_restore); #endif /* CONFIG_PPC64 */ static int show_other_interrupts(struct seq_file *p, int prec) @@ -587,8 +587,10 @@ struct irq_host *irq_alloc_host(struct device_node *of_node, * this will be fixed once slab is made available early * instead of the current cruft */ - if (mem_init_done) + if (mem_init_done) { + of_node_put(host->of_node); kfree(host); + } return NULL; } irq_map[0].host = host; @@ -1143,7 +1145,7 @@ static int virq_debug_show(struct seq_file *m, void *private) unsigned long flags; struct irq_desc *desc; const char *p; - char none[] = "none"; + static const char none[] = "none"; int i; seq_printf(m, "%-5s %-7s %-15s %s\n", "virq", "hwirq", diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 50362b6ef6e9..8d9e3b9cda64 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -56,7 +56,7 @@ static unsigned long get_purr(void) for_each_possible_cpu(cpu) { if (firmware_has_feature(FW_FEATURE_ISERIES)) - sum_purr += lppaca[cpu].emulated_time_base; + sum_purr += lppaca_of(cpu).emulated_time_base; else { struct cpu_usage *cu; @@ -263,7 +263,7 @@ static void parse_ppp_data(struct seq_file *m) ppp_data.active_system_procs); /* pool related entries are apropriate for shared configs */ - if (lppaca[0].shared_proc) { + if (lppaca_of(0).shared_proc) { unsigned long pool_idle_time, pool_procs; seq_printf(m, "pool=%d\n", ppp_data.pool_num); @@ -460,8 +460,8 @@ static void pseries_cmo_data(struct seq_file *m) return; for_each_possible_cpu(cpu) { - cmo_faults += lppaca[cpu].cmo_faults; - cmo_fault_time += lppaca[cpu].cmo_fault_time; + cmo_faults += lppaca_of(cpu).cmo_faults; + cmo_fault_time += lppaca_of(cpu).cmo_fault_time; } seq_printf(m, "cmo_faults=%lu\n", cmo_faults); @@ -479,8 +479,8 @@ static void splpar_dispatch_data(struct seq_file *m) unsigned long dispatch_dispersions = 0; for_each_possible_cpu(cpu) { - dispatches += lppaca[cpu].yield_count; - dispatch_dispersions += lppaca[cpu].dispersion_count; + dispatches += lppaca_of(cpu).yield_count; + dispatch_dispersions += lppaca_of(cpu).dispersion_count; } seq_printf(m, "dispatches=%lu\n", dispatches); @@ -545,7 +545,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) seq_printf(m, "partition_potential_processors=%d\n", partition_potential_processors); - seq_printf(m, "shared_processor_mode=%d\n", lppaca[0].shared_proc); + seq_printf(m, "shared_processor_mode=%d\n", lppaca_of(0).shared_proc); seq_printf(m, "slb_size=%d\n", mmu_slb_size); diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index dd6c141f1662..df7e20c191cd 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -14,10 +14,34 @@ #include <linux/threads.h> #include <linux/memblock.h> #include <linux/of.h> +#include <linux/irq.h> + #include <asm/machdep.h> #include <asm/prom.h> #include <asm/sections.h> +void machine_kexec_mask_interrupts(void) { + unsigned int i; + + for_each_irq(i) { + struct irq_desc *desc = irq_to_desc(i); + + if (!desc || !desc->chip) + continue; + + if (desc->chip->eoi && + desc->status & IRQ_INPROGRESS) + desc->chip->eoi(i); + + if (desc->chip->mask) + desc->chip->mask(i); + + if (desc->chip->disable && + !(desc->status & IRQ_DISABLED)) + desc->chip->disable(i); + } +} + void machine_crash_shutdown(struct pt_regs *regs) { if (ppc_md.machine_crash_shutdown) diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kernel/machine_kexec_32.c index ae63a964b858..e63f2e7d2efb 100644 --- a/arch/powerpc/kernel/machine_kexec_32.c +++ b/arch/powerpc/kernel/machine_kexec_32.c @@ -39,6 +39,10 @@ void default_machine_kexec(struct kimage *image) /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); + /* mask each interrupt so we are in a more sane state for the + * kexec kernel */ + machine_kexec_mask_interrupts(); + page_list = image->head; /* we need both effective and real address here */ diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index d0a26f1770fe..ebf9846f3c3b 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -27,6 +27,20 @@ extern unsigned long __toc_start; #ifdef CONFIG_PPC_BOOK3S /* + * We only have to have statically allocated lppaca structs on + * legacy iSeries, which supports at most 64 cpus. + */ +#ifdef CONFIG_PPC_ISERIES +#if NR_CPUS < 64 +#define NR_LPPACAS NR_CPUS +#else +#define NR_LPPACAS 64 +#endif +#else /* not iSeries */ +#define NR_LPPACAS 1 +#endif + +/* * The structure which the hypervisor knows about - this structure * should not cross a page boundary. The vpa_init/register_vpa call * is now known to fail if the lppaca structure crosses a page @@ -36,7 +50,7 @@ extern unsigned long __toc_start; * will suffice to ensure that it doesn't cross a page boundary. */ struct lppaca lppaca[] = { - [0 ... (NR_CPUS-1)] = { + [0 ... (NR_LPPACAS-1)] = { .desc = 0xd397d781, /* "LpPa" */ .size = sizeof(struct lppaca), .dyn_proc_status = 2, @@ -49,6 +63,54 @@ struct lppaca lppaca[] = { }, }; +static struct lppaca *extra_lppacas; +static long __initdata lppaca_size; + +static void allocate_lppacas(int nr_cpus, unsigned long limit) +{ + if (nr_cpus <= NR_LPPACAS) + return; + + lppaca_size = PAGE_ALIGN(sizeof(struct lppaca) * + (nr_cpus - NR_LPPACAS)); + extra_lppacas = __va(memblock_alloc_base(lppaca_size, + PAGE_SIZE, limit)); +} + +static struct lppaca *new_lppaca(int cpu) +{ + struct lppaca *lp; + + if (cpu < NR_LPPACAS) + return &lppaca[cpu]; + + lp = extra_lppacas + (cpu - NR_LPPACAS); + *lp = lppaca[0]; + + return lp; +} + +static void free_lppacas(void) +{ + long new_size = 0, nr; + + if (!lppaca_size) + return; + nr = num_possible_cpus() - NR_LPPACAS; + if (nr > 0) + new_size = PAGE_ALIGN(nr * sizeof(struct lppaca)); + if (new_size >= lppaca_size) + return; + + memblock_free(__pa(extra_lppacas) + new_size, lppaca_size - new_size); + lppaca_size = new_size; +} + +#else + +static inline void allocate_lppacas(int nr_cpus, unsigned long limit) { } +static inline void free_lppacas(void) { } + #endif /* CONFIG_PPC_BOOK3S */ #ifdef CONFIG_PPC_STD_MMU_64 @@ -88,7 +150,7 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu) unsigned long kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL; #ifdef CONFIG_PPC_BOOK3S - new_paca->lppaca_ptr = &lppaca[cpu]; + new_paca->lppaca_ptr = new_lppaca(cpu); #else new_paca->kernel_pgd = swapper_pg_dir; #endif @@ -127,7 +189,7 @@ void __init allocate_pacas(void) * the first segment. On iSeries they must be within the area mapped * by the HV, which is HvPagesToMap * HVPAGESIZE bytes. */ - limit = min(0x10000000ULL, memblock.rmo_size); + limit = min(0x10000000ULL, ppc64_rma_size); if (firmware_has_feature(FW_FEATURE_ISERIES)) limit = min(limit, HvPagesToMap * HVPAGESIZE); @@ -144,6 +206,8 @@ void __init allocate_pacas(void) printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n", paca_size, nr_cpus, paca); + allocate_lppacas(nr_cpus, limit); + /* Can't use for_each_*_cpu, as they aren't functional yet */ for (cpu = 0; cpu < nr_cpus; cpu++) initialise_paca(&paca[cpu], cpu); @@ -164,4 +228,6 @@ void __init free_unused_pacas(void) paca_size - new_size); paca_size = new_size; + + free_lppacas(); } diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 9021c4ad4bbd..10a44e68ef11 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1090,8 +1090,6 @@ void __devinit pcibios_setup_bus_devices(struct pci_bus *bus) bus->number, bus->self ? pci_name(bus->self) : "PHB"); list_for_each_entry(dev, &bus->devices, bus_list) { - struct dev_archdata *sd = &dev->dev.archdata; - /* Cardbus can call us to add new devices to a bus, so ignore * those who are already fully discovered */ @@ -1107,7 +1105,7 @@ void __devinit pcibios_setup_bus_devices(struct pci_bus *bus) set_dev_node(&dev->dev, pcibus_to_node(dev->bus)); /* Hook up default DMA ops */ - sd->dma_ops = pci_dma_ops; + set_dma_ops(&dev->dev, pci_dma_ops); set_dma_offset(&dev->dev, PCI_DRAM_OFFSET); /* Additional platform DMA/iommu setup */ diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c index 8eff48e20dba..3fee685de4df 100644 --- a/arch/powerpc/kernel/ppc970-pmu.c +++ b/arch/powerpc/kernel/ppc970-pmu.c @@ -169,9 +169,11 @@ static int p970_marked_instr_event(u64 event) switch (unit) { case PM_VPU: mask = 0x4c; /* byte 0 bits 2,3,6 */ + break; case PM_LSU0: /* byte 2 bits 0,2,3,4,6; all of byte 1 */ mask = 0x085dff00; + break; case PM_LSU1L: mask = 0x50 << 24; /* byte 3 bits 4,6 */ break; diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index b1c648a36b03..84906d3fc860 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -517,7 +517,6 @@ struct task_struct *__switch_to(struct task_struct *prev, account_system_vtime(current); account_process_vtime(current); - calculate_steal_time(); /* * We can't take a PMU exception inside _switch() since there is a @@ -1298,14 +1297,3 @@ unsigned long randomize_et_dyn(unsigned long base) return ret; } - -#ifdef CONFIG_SMP -int arch_sd_sibling_asym_packing(void) -{ - if (cpu_has_feature(CPU_FTR_ASYM_SMT)) { - printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n"); - return SD_ASYM_PACKING; - } - return 0; -} -#endif diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index fed9bf6187d1..c3c6a8857544 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -66,6 +66,7 @@ int __initdata iommu_is_off; int __initdata iommu_force_on; unsigned long tce_alloc_start, tce_alloc_end; +u64 ppc64_rma_size; #endif static int __init early_parse_mem(char *p) @@ -98,7 +99,7 @@ static void __init move_device_tree(void) if ((memory_limit && (start + size) > memory_limit) || overlaps_crashkernel(start, size)) { - p = __va(memblock_alloc_base(size, PAGE_SIZE, memblock.rmo_size)); + p = __va(memblock_alloc(size, PAGE_SIZE)); memcpy(p, initial_boot_params, size); initial_boot_params = (struct boot_param_header *)p; DBG("Moved device tree to 0x%p\n", p); @@ -492,7 +493,7 @@ static int __init early_init_dt_scan_memory_ppc(unsigned long node, void __init early_init_dt_add_memory_arch(u64 base, u64 size) { -#if defined(CONFIG_PPC64) +#ifdef CONFIG_PPC64 if (iommu_is_off) { if (base >= 0x80000000ul) return; @@ -501,9 +502,13 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) } #endif - memblock_add(base, size); - + /* First MEMBLOCK added, do some special initializations */ + if (memstart_addr == ~(phys_addr_t)0) + setup_initial_memory_limit(base, size); memstart_addr = min((u64)memstart_addr, base); + + /* Add the chunk to the MEMBLOCK list */ + memblock_add(base, size); } u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align) @@ -655,7 +660,6 @@ static void __init phyp_dump_reserve_mem(void) static inline void __init phyp_dump_reserve_mem(void) {} #endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */ - void __init early_init_devtree(void *params) { phys_addr_t limit; @@ -683,6 +687,7 @@ void __init early_init_devtree(void *params) /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); + of_scan_flat_dt(early_init_dt_scan_root, NULL); of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 11f3cd9c832f..286d9783d93f 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -1681,7 +1681,7 @@ long do_syscall_trace_enter(struct pt_regs *regs) if (unlikely(current->audit_context)) { #ifdef CONFIG_PPC64 - if (!test_thread_flag(TIF_32BIT)) + if (!is_32bit_task()) audit_syscall_entry(AUDIT_ARCH_PPC64, regs->gpr[0], regs->gpr[3], regs->gpr[4], diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 41048de3c6c3..8fe8bc61c10a 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -805,7 +805,7 @@ static void rtas_percpu_suspend_me(void *info) __rtas_suspend_cpu((struct rtas_suspend_me_data *)info, 1); } -static int rtas_ibm_suspend_me(struct rtas_args *args) +int rtas_ibm_suspend_me(struct rtas_args *args) { long state; long rc; @@ -855,7 +855,7 @@ static int rtas_ibm_suspend_me(struct rtas_args *args) return atomic_read(&data.error); } #else /* CONFIG_PPC_PSERIES */ -static int rtas_ibm_suspend_me(struct rtas_args *args) +int rtas_ibm_suspend_me(struct rtas_args *args) { return -ENOSYS; } @@ -969,7 +969,7 @@ void __init rtas_initialize(void) */ #ifdef CONFIG_PPC64 if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) { - rtas_region = min(memblock.rmo_size, RTAS_INSTANTIATE_MAX); + rtas_region = min(ppc64_rma_size, RTAS_INSTANTIATE_MAX); ibm_suspend_me_token = rtas_token("ibm,suspend-me"); } #endif diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 93666f9cabf1..1d2fbc905303 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -46,7 +46,7 @@ extern void bootx_init(unsigned long r4, unsigned long phys); -int boot_cpuid; +int boot_cpuid = -1; EXPORT_SYMBOL_GPL(boot_cpuid); int boot_cpuid_phys; @@ -246,7 +246,7 @@ static void __init irqstack_early_init(void) unsigned int i; /* interrupt stacks must be in lowmem, we get that for free on ppc32 - * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */ + * as the memblock is limited to lowmem by default */ for_each_possible_cpu(i) { softirq_ctx[i] = (struct thread_info *) __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index e72690ec9b87..2a178b0ebcdf 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -486,7 +486,7 @@ static void __init emergency_stack_init(void) * bringup, we need to get at them in real mode. This means they * must also be within the RMO region. */ - limit = min(slb0_limit(), memblock.rmo_size); + limit = min(slb0_limit(), ppc64_rma_size); for_each_possible_cpu(i) { unsigned long sp; diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0008bc58e826..68034bbf2e4f 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -508,9 +508,6 @@ int __devinit start_secondary(void *unused) if (smp_ops->take_timebase) smp_ops->take_timebase(); - if (system_state > SYSTEM_BOOTING) - snapshot_timebase(); - secondary_cpu_time_init(); ipi_call_lock(); @@ -575,11 +572,18 @@ void __init smp_cpus_done(unsigned int max_cpus) free_cpumask_var(old_mask); - snapshot_timebases(); - dump_numa_cpu_topology(); } +int arch_sd_sibling_asym_packing(void) +{ + if (cpu_has_feature(CPU_FTR_ASYM_SMT)) { + printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n"); + return SD_ASYM_PACKING; + } + return 0; +} + #ifdef CONFIG_HOTPLUG_CPU int __cpu_disable(void) { diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 54888eb10c3b..010406958d97 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -161,10 +161,9 @@ extern struct timezone sys_tz; static long timezone_offset; unsigned long ppc_proc_freq; -EXPORT_SYMBOL(ppc_proc_freq); +EXPORT_SYMBOL_GPL(ppc_proc_freq); unsigned long ppc_tb_freq; - -static DEFINE_PER_CPU(u64, last_jiffy); +EXPORT_SYMBOL_GPL(ppc_tb_freq); #ifdef CONFIG_VIRT_CPU_ACCOUNTING /* @@ -185,6 +184,8 @@ DEFINE_PER_CPU(unsigned long, cputime_scaled_last_delta); cputime_t cputime_one_jiffy; +void (*dtl_consumer)(struct dtl_entry *, u64); + static void calc_cputime_factors(void) { struct div_result res; @@ -200,62 +201,153 @@ static void calc_cputime_factors(void) } /* - * Read the PURR on systems that have it, otherwise the timebase. + * Read the SPURR on systems that have it, otherwise the PURR, + * or if that doesn't exist return the timebase value passed in. */ -static u64 read_purr(void) +static u64 read_spurr(u64 tb) { + if (cpu_has_feature(CPU_FTR_SPURR)) + return mfspr(SPRN_SPURR); if (cpu_has_feature(CPU_FTR_PURR)) return mfspr(SPRN_PURR); - return mftb(); + return tb; } +#ifdef CONFIG_PPC_SPLPAR + /* - * Read the SPURR on systems that have it, otherwise the purr + * Scan the dispatch trace log and count up the stolen time. + * Should be called with interrupts disabled. */ -static u64 read_spurr(u64 purr) +static u64 scan_dispatch_log(u64 stop_tb) { - /* - * cpus without PURR won't have a SPURR - * We already know the former when we use this, so tell gcc - */ - if (cpu_has_feature(CPU_FTR_PURR) && cpu_has_feature(CPU_FTR_SPURR)) - return mfspr(SPRN_SPURR); - return purr; + u64 i = local_paca->dtl_ridx; + struct dtl_entry *dtl = local_paca->dtl_curr; + struct dtl_entry *dtl_end = local_paca->dispatch_log_end; + struct lppaca *vpa = local_paca->lppaca_ptr; + u64 tb_delta; + u64 stolen = 0; + u64 dtb; + + if (i == vpa->dtl_idx) + return 0; + while (i < vpa->dtl_idx) { + if (dtl_consumer) + dtl_consumer(dtl, i); + dtb = dtl->timebase; + tb_delta = dtl->enqueue_to_dispatch_time + + dtl->ready_to_enqueue_time; + barrier(); + if (i + N_DISPATCH_LOG < vpa->dtl_idx) { + /* buffer has overflowed */ + i = vpa->dtl_idx - N_DISPATCH_LOG; + dtl = local_paca->dispatch_log + (i % N_DISPATCH_LOG); + continue; + } + if (dtb > stop_tb) + break; + stolen += tb_delta; + ++i; + ++dtl; + if (dtl == dtl_end) + dtl = local_paca->dispatch_log; + } + local_paca->dtl_ridx = i; + local_paca->dtl_curr = dtl; + return stolen; } /* + * Accumulate stolen time by scanning the dispatch trace log. + * Called on entry from user mode. + */ +void accumulate_stolen_time(void) +{ + u64 sst, ust; + + sst = scan_dispatch_log(get_paca()->starttime_user); + ust = scan_dispatch_log(get_paca()->starttime); + get_paca()->system_time -= sst; + get_paca()->user_time -= ust; + get_paca()->stolen_time += ust + sst; +} + +static inline u64 calculate_stolen_time(u64 stop_tb) +{ + u64 stolen = 0; + + if (get_paca()->dtl_ridx != get_paca()->lppaca_ptr->dtl_idx) { + stolen = scan_dispatch_log(stop_tb); + get_paca()->system_time -= stolen; + } + + stolen += get_paca()->stolen_time; + get_paca()->stolen_time = 0; + return stolen; +} + +#else /* CONFIG_PPC_SPLPAR */ +static inline u64 calculate_stolen_time(u64 stop_tb) +{ + return 0; +} + +#endif /* CONFIG_PPC_SPLPAR */ + +/* * Account time for a transition between system, hard irq * or soft irq state. */ void account_system_vtime(struct task_struct *tsk) { - u64 now, nowscaled, delta, deltascaled, sys_time; + u64 now, nowscaled, delta, deltascaled; unsigned long flags; + u64 stolen, udelta, sys_scaled, user_scaled; local_irq_save(flags); - now = read_purr(); + now = mftb(); nowscaled = read_spurr(now); - delta = now - get_paca()->startpurr; + get_paca()->system_time += now - get_paca()->starttime; + get_paca()->starttime = now; deltascaled = nowscaled - get_paca()->startspurr; - get_paca()->startpurr = now; get_paca()->startspurr = nowscaled; - if (!in_interrupt()) { - /* deltascaled includes both user and system time. - * Hence scale it based on the purr ratio to estimate - * the system time */ - sys_time = get_paca()->system_time; - if (get_paca()->user_time) - deltascaled = deltascaled * sys_time / - (sys_time + get_paca()->user_time); - delta += sys_time; - get_paca()->system_time = 0; + + stolen = calculate_stolen_time(now); + + delta = get_paca()->system_time; + get_paca()->system_time = 0; + udelta = get_paca()->user_time - get_paca()->utime_sspurr; + get_paca()->utime_sspurr = get_paca()->user_time; + + /* + * Because we don't read the SPURR on every kernel entry/exit, + * deltascaled includes both user and system SPURR ticks. + * Apportion these ticks to system SPURR ticks and user + * SPURR ticks in the same ratio as the system time (delta) + * and user time (udelta) values obtained from the timebase + * over the same interval. The system ticks get accounted here; + * the user ticks get saved up in paca->user_time_scaled to be + * used by account_process_tick. + */ + sys_scaled = delta; + user_scaled = udelta; + if (deltascaled != delta + udelta) { + if (udelta) { + sys_scaled = deltascaled * delta / (delta + udelta); + user_scaled = deltascaled - sys_scaled; + } else { + sys_scaled = deltascaled; + } + } + get_paca()->user_time_scaled += user_scaled; + + if (in_irq() || idle_task(smp_processor_id()) != tsk) { + account_system_time(tsk, 0, delta, sys_scaled); + if (stolen) + account_steal_time(stolen); + } else { + account_idle_time(delta + stolen); } - if (in_irq() || idle_task(smp_processor_id()) != tsk) - account_system_time(tsk, 0, delta, deltascaled); - else - account_idle_time(delta); - __get_cpu_var(cputime_last_delta) = delta; - __get_cpu_var(cputime_scaled_last_delta) = deltascaled; local_irq_restore(flags); } EXPORT_SYMBOL_GPL(account_system_vtime); @@ -265,125 +357,26 @@ EXPORT_SYMBOL_GPL(account_system_vtime); * by the exception entry and exit code to the generic process * user and system time records. * Must be called with interrupts disabled. + * Assumes that account_system_vtime() has been called recently + * (i.e. since the last entry from usermode) so that + * get_paca()->user_time_scaled is up to date. */ void account_process_tick(struct task_struct *tsk, int user_tick) { cputime_t utime, utimescaled; utime = get_paca()->user_time; + utimescaled = get_paca()->user_time_scaled; get_paca()->user_time = 0; - utimescaled = cputime_to_scaled(utime); + get_paca()->user_time_scaled = 0; + get_paca()->utime_sspurr = 0; account_user_time(tsk, utime, utimescaled); } -/* - * Stuff for accounting stolen time. - */ -struct cpu_purr_data { - int initialized; /* thread is running */ - u64 tb; /* last TB value read */ - u64 purr; /* last PURR value read */ - u64 spurr; /* last SPURR value read */ -}; - -/* - * Each entry in the cpu_purr_data array is manipulated only by its - * "owner" cpu -- usually in the timer interrupt but also occasionally - * in process context for cpu online. As long as cpus do not touch - * each others' cpu_purr_data, disabling local interrupts is - * sufficient to serialize accesses. - */ -static DEFINE_PER_CPU(struct cpu_purr_data, cpu_purr_data); - -static void snapshot_tb_and_purr(void *data) -{ - unsigned long flags; - struct cpu_purr_data *p = &__get_cpu_var(cpu_purr_data); - - local_irq_save(flags); - p->tb = get_tb_or_rtc(); - p->purr = mfspr(SPRN_PURR); - wmb(); - p->initialized = 1; - local_irq_restore(flags); -} - -/* - * Called during boot when all cpus have come up. - */ -void snapshot_timebases(void) -{ - if (!cpu_has_feature(CPU_FTR_PURR)) - return; - on_each_cpu(snapshot_tb_and_purr, NULL, 1); -} - -/* - * Must be called with interrupts disabled. - */ -void calculate_steal_time(void) -{ - u64 tb, purr; - s64 stolen; - struct cpu_purr_data *pme; - - pme = &__get_cpu_var(cpu_purr_data); - if (!pme->initialized) - return; /* !CPU_FTR_PURR or early in early boot */ - tb = mftb(); - purr = mfspr(SPRN_PURR); - stolen = (tb - pme->tb) - (purr - pme->purr); - if (stolen > 0) { - if (idle_task(smp_processor_id()) != current) - account_steal_time(stolen); - else - account_idle_time(stolen); - } - pme->tb = tb; - pme->purr = purr; -} - -#ifdef CONFIG_PPC_SPLPAR -/* - * Must be called before the cpu is added to the online map when - * a cpu is being brought up at runtime. - */ -static void snapshot_purr(void) -{ - struct cpu_purr_data *pme; - unsigned long flags; - - if (!cpu_has_feature(CPU_FTR_PURR)) - return; - local_irq_save(flags); - pme = &__get_cpu_var(cpu_purr_data); - pme->tb = mftb(); - pme->purr = mfspr(SPRN_PURR); - pme->initialized = 1; - local_irq_restore(flags); -} - -#endif /* CONFIG_PPC_SPLPAR */ - #else /* ! CONFIG_VIRT_CPU_ACCOUNTING */ #define calc_cputime_factors() -#define calculate_steal_time() do { } while (0) #endif -#if !(defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(CONFIG_PPC_SPLPAR)) -#define snapshot_purr() do { } while (0) -#endif - -/* - * Called when a cpu comes up after the system has finished booting, - * i.e. as a result of a hotplug cpu action. - */ -void snapshot_timebase(void) -{ - __get_cpu_var(last_jiffy) = get_tb_or_rtc(); - snapshot_purr(); -} - void __delay(unsigned long loops) { unsigned long start; @@ -585,8 +578,6 @@ void timer_interrupt(struct pt_regs * regs) old_regs = set_irq_regs(regs); irq_enter(); - calculate_steal_time(); - if (test_irq_work_pending()) { clear_irq_work_pending(); irq_work_run(); diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index a45a63c3a0c7..1b2cdc8eec90 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -538,6 +538,11 @@ int machine_check_e500(struct pt_regs *regs) return 0; } + +int machine_check_generic(struct pt_regs *regs) +{ + return 0; +} #elif defined(CONFIG_E200) int machine_check_e200(struct pt_regs *regs) { diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index 13002fe206e7..fd8728729abc 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -159,7 +159,7 @@ static void dump_vdso_pages(struct vm_area_struct * vma) { int i; - if (!vma || test_thread_flag(TIF_32BIT)) { + if (!vma || is_32bit_task()) { printk("vDSO32 @ %016lx:\n", (unsigned long)vdso32_kbase); for (i=0; i<vdso32_pages; i++) { struct page *pg = virt_to_page(vdso32_kbase + @@ -170,7 +170,7 @@ static void dump_vdso_pages(struct vm_area_struct * vma) dump_one_vdso_page(pg, upg); } } - if (!vma || !test_thread_flag(TIF_32BIT)) { + if (!vma || !is_32bit_task()) { printk("vDSO64 @ %016lx:\n", (unsigned long)vdso64_kbase); for (i=0; i<vdso64_pages; i++) { struct page *pg = virt_to_page(vdso64_kbase + @@ -200,7 +200,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) return 0; #ifdef CONFIG_PPC64 - if (test_thread_flag(TIF_32BIT)) { + if (is_32bit_task()) { vdso_pagelist = vdso32_pagelist; vdso_pages = vdso32_pages; vdso_base = VDSO32_MBASE; diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile index 51ead52141bd..9a7946c41738 100644 --- a/arch/powerpc/kernel/vdso32/Makefile +++ b/arch/powerpc/kernel/vdso32/Makefile @@ -14,10 +14,10 @@ obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) GCOV_PROFILE := n -EXTRA_CFLAGS := -shared -fno-common -fno-builtin -EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \ +ccflags-y := -shared -fno-common -fno-builtin +ccflags-y += -nostdlib -Wl,-soname=linux-vdso32.so.1 \ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) -EXTRA_AFLAGS := -D__VDSO32__ -s +asflags-y := -D__VDSO32__ -s obj-y += vdso32_wrapper.o extra-y += vdso32.lds diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile index 79da65d44a2a..8c500d8622e4 100644 --- a/arch/powerpc/kernel/vdso64/Makefile +++ b/arch/powerpc/kernel/vdso64/Makefile @@ -9,10 +9,10 @@ obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64)) GCOV_PROFILE := n -EXTRA_CFLAGS := -shared -fno-common -fno-builtin -EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \ +ccflags-y := -shared -fno-common -fno-builtin +ccflags-y += -nostdlib -Wl,-soname=linux-vdso64.so.1 \ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) -EXTRA_AFLAGS := -D__VDSO64__ -s +asflags-y := -D__VDSO64__ -s obj-y += vdso64_wrapper.o extra-y += vdso64.lds diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index fa3469ddaef8..d692989a4318 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -1184,7 +1184,12 @@ EXPORT_SYMBOL(vio_unregister_driver); /* vio_dev refcount hit 0 */ static void __devinit vio_dev_release(struct device *dev) { - /* XXX should free TCE table */ + struct iommu_table *tbl = get_iommu_table_base(dev); + + /* iSeries uses a common table for all vio devices */ + if (!firmware_has_feature(FW_FEATURE_ISERIES) && tbl) + iommu_free_table(tbl, dev->of_node ? + dev->of_node->full_name : dev_name(dev)); of_node_put(dev->of_node); kfree(to_vio_dev(dev)); } @@ -1254,8 +1259,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node) if (device_register(&viodev->dev)) { printk(KERN_ERR "%s: failed to register device %s\n", __func__, dev_name(&viodev->dev)); - /* XXX free TCE table */ - kfree(viodev); + put_device(&viodev->dev); return NULL; } diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile index d45c818a384c..4d6863823f69 100644 --- a/arch/powerpc/kvm/Makefile +++ b/arch/powerpc/kvm/Makefile @@ -4,7 +4,7 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror -EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm +ccflags-y := -Ivirt/kvm -Iarch/powerpc/kvm common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o) diff --git a/arch/powerpc/kvm/book3s_paired_singles.c b/arch/powerpc/kvm/book3s_paired_singles.c index 474f2e24050a..35a701f3ece4 100644 --- a/arch/powerpc/kvm/book3s_paired_singles.c +++ b/arch/powerpc/kvm/book3s_paired_singles.c @@ -159,7 +159,7 @@ static inline void kvmppc_sync_qpr(struct kvm_vcpu *vcpu, int rt) { - kvm_cvt_df(&vcpu->arch.fpr[rt], &vcpu->arch.qpr[rt], &vcpu->arch.fpscr); + kvm_cvt_df(&vcpu->arch.fpr[rt], &vcpu->arch.qpr[rt]); } static void kvmppc_inject_pf(struct kvm_vcpu *vcpu, ulong eaddr, bool is_store) @@ -204,7 +204,7 @@ static int kvmppc_emulate_fpr_load(struct kvm_run *run, struct kvm_vcpu *vcpu, /* put in registers */ switch (ls_type) { case FPU_LS_SINGLE: - kvm_cvt_fd((u32*)tmp, &vcpu->arch.fpr[rs], &vcpu->arch.fpscr); + kvm_cvt_fd((u32*)tmp, &vcpu->arch.fpr[rs]); vcpu->arch.qpr[rs] = *((u32*)tmp); break; case FPU_LS_DOUBLE: @@ -230,7 +230,7 @@ static int kvmppc_emulate_fpr_store(struct kvm_run *run, struct kvm_vcpu *vcpu, switch (ls_type) { case FPU_LS_SINGLE: - kvm_cvt_df(&vcpu->arch.fpr[rs], (u32*)tmp, &vcpu->arch.fpscr); + kvm_cvt_df(&vcpu->arch.fpr[rs], (u32*)tmp); val = *((u32*)tmp); len = sizeof(u32); break; @@ -296,7 +296,7 @@ static int kvmppc_emulate_psq_load(struct kvm_run *run, struct kvm_vcpu *vcpu, emulated = EMULATE_DONE; /* put in registers */ - kvm_cvt_fd(&tmp[0], &vcpu->arch.fpr[rs], &vcpu->arch.fpscr); + kvm_cvt_fd(&tmp[0], &vcpu->arch.fpr[rs]); vcpu->arch.qpr[rs] = tmp[1]; dprintk(KERN_INFO "KVM: PSQ_LD [0x%x, 0x%x] at 0x%lx (%d)\n", tmp[0], @@ -314,7 +314,7 @@ static int kvmppc_emulate_psq_store(struct kvm_run *run, struct kvm_vcpu *vcpu, u32 tmp[2]; int len = w ? sizeof(u32) : sizeof(u64); - kvm_cvt_df(&vcpu->arch.fpr[rs], &tmp[0], &vcpu->arch.fpscr); + kvm_cvt_df(&vcpu->arch.fpr[rs], &tmp[0]); tmp[1] = vcpu->arch.qpr[rs]; r = kvmppc_st(vcpu, &addr, len, tmp, true); @@ -516,9 +516,9 @@ static int kvmppc_ps_three_in(struct kvm_vcpu *vcpu, bool rc, WARN_ON(rc); /* PS0 */ - kvm_cvt_df(&fpr[reg_in1], &ps0_in1, &vcpu->arch.fpscr); - kvm_cvt_df(&fpr[reg_in2], &ps0_in2, &vcpu->arch.fpscr); - kvm_cvt_df(&fpr[reg_in3], &ps0_in3, &vcpu->arch.fpscr); + kvm_cvt_df(&fpr[reg_in1], &ps0_in1); + kvm_cvt_df(&fpr[reg_in2], &ps0_in2); + kvm_cvt_df(&fpr[reg_in3], &ps0_in3); if (scalar & SCALAR_LOW) ps0_in2 = qpr[reg_in2]; @@ -529,7 +529,7 @@ static int kvmppc_ps_three_in(struct kvm_vcpu *vcpu, bool rc, ps0_in1, ps0_in2, ps0_in3, ps0_out); if (!(scalar & SCALAR_NO_PS0)) - kvm_cvt_fd(&ps0_out, &fpr[reg_out], &vcpu->arch.fpscr); + kvm_cvt_fd(&ps0_out, &fpr[reg_out]); /* PS1 */ ps1_in1 = qpr[reg_in1]; @@ -566,12 +566,12 @@ static int kvmppc_ps_two_in(struct kvm_vcpu *vcpu, bool rc, WARN_ON(rc); /* PS0 */ - kvm_cvt_df(&fpr[reg_in1], &ps0_in1, &vcpu->arch.fpscr); + kvm_cvt_df(&fpr[reg_in1], &ps0_in1); if (scalar & SCALAR_LOW) ps0_in2 = qpr[reg_in2]; else - kvm_cvt_df(&fpr[reg_in2], &ps0_in2, &vcpu->arch.fpscr); + kvm_cvt_df(&fpr[reg_in2], &ps0_in2); func(&vcpu->arch.fpscr, &ps0_out, &ps0_in1, &ps0_in2); @@ -579,7 +579,7 @@ static int kvmppc_ps_two_in(struct kvm_vcpu *vcpu, bool rc, dprintk(KERN_INFO "PS2 ps0 -> f(0x%x, 0x%x) = 0x%x\n", ps0_in1, ps0_in2, ps0_out); - kvm_cvt_fd(&ps0_out, &fpr[reg_out], &vcpu->arch.fpscr); + kvm_cvt_fd(&ps0_out, &fpr[reg_out]); } /* PS1 */ @@ -615,13 +615,13 @@ static int kvmppc_ps_one_in(struct kvm_vcpu *vcpu, bool rc, WARN_ON(rc); /* PS0 */ - kvm_cvt_df(&fpr[reg_in], &ps0_in, &vcpu->arch.fpscr); + kvm_cvt_df(&fpr[reg_in], &ps0_in); func(&vcpu->arch.fpscr, &ps0_out, &ps0_in); dprintk(KERN_INFO "PS1 ps0 -> f(0x%x) = 0x%x\n", ps0_in, ps0_out); - kvm_cvt_fd(&ps0_out, &fpr[reg_out], &vcpu->arch.fpscr); + kvm_cvt_fd(&ps0_out, &fpr[reg_out]); /* PS1 */ ps1_in = qpr[reg_in]; @@ -671,7 +671,7 @@ int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu) #ifdef DEBUG for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++) { u32 f; - kvm_cvt_df(&vcpu->arch.fpr[i], &f, &vcpu->arch.fpscr); + kvm_cvt_df(&vcpu->arch.fpr[i], &f); dprintk(KERN_INFO "FPR[%d] = 0x%x / 0x%llx QPR[%d] = 0x%x\n", i, f, vcpu->arch.fpr[i], i, vcpu->arch.qpr[i]); } @@ -796,8 +796,7 @@ int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu) vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_ra]; /* vcpu->arch.qpr[ax_rd] = vcpu->arch.fpr[ax_rb]; */ kvm_cvt_df(&vcpu->arch.fpr[ax_rb], - &vcpu->arch.qpr[ax_rd], - &vcpu->arch.fpscr); + &vcpu->arch.qpr[ax_rd]); break; case OP_4X_PS_MERGE01: WARN_ON(rcomp); @@ -808,19 +807,16 @@ int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu) WARN_ON(rcomp); /* vcpu->arch.fpr[ax_rd] = vcpu->arch.qpr[ax_ra]; */ kvm_cvt_fd(&vcpu->arch.qpr[ax_ra], - &vcpu->arch.fpr[ax_rd], - &vcpu->arch.fpscr); + &vcpu->arch.fpr[ax_rd]); /* vcpu->arch.qpr[ax_rd] = vcpu->arch.fpr[ax_rb]; */ kvm_cvt_df(&vcpu->arch.fpr[ax_rb], - &vcpu->arch.qpr[ax_rd], - &vcpu->arch.fpscr); + &vcpu->arch.qpr[ax_rd]); break; case OP_4X_PS_MERGE11: WARN_ON(rcomp); /* vcpu->arch.fpr[ax_rd] = vcpu->arch.qpr[ax_ra]; */ kvm_cvt_fd(&vcpu->arch.qpr[ax_ra], - &vcpu->arch.fpr[ax_rd], - &vcpu->arch.fpscr); + &vcpu->arch.fpr[ax_rd]); vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb]; break; } @@ -1255,7 +1251,7 @@ int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu) #ifdef DEBUG for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++) { u32 f; - kvm_cvt_df(&vcpu->arch.fpr[i], &f, &vcpu->arch.fpscr); + kvm_cvt_df(&vcpu->arch.fpr[i], &f); dprintk(KERN_INFO "FPR[%d] = 0x%x\n", i, f); } #endif diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c index 4568ec386c2a..b83ba581fd8e 100644 --- a/arch/powerpc/kvm/emulate.c +++ b/arch/powerpc/kvm/emulate.c @@ -145,7 +145,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) /* this default type might be overwritten by subcategories */ kvmppc_set_exit_type(vcpu, EMULATED_INST_EXITS); - pr_debug(KERN_INFO "Emulating opcode %d / %d\n", get_op(inst), get_xop(inst)); + pr_debug("Emulating opcode %d / %d\n", get_op(inst), get_xop(inst)); switch (get_op(inst)) { case OP_TRAP: @@ -275,7 +275,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) { u64 jd = get_tb() - vcpu->arch.dec_jiffies; kvmppc_set_gpr(vcpu, rt, vcpu->arch.dec - jd); - pr_debug(KERN_INFO "mfDEC: %x - %llx = %lx\n", + pr_debug("mfDEC: %x - %llx = %lx\n", vcpu->arch.dec, jd, kvmppc_get_gpr(vcpu, rt)); break; diff --git a/arch/powerpc/kvm/fpu.S b/arch/powerpc/kvm/fpu.S index cb34bbe16113..bf68d597549e 100644 --- a/arch/powerpc/kvm/fpu.S +++ b/arch/powerpc/kvm/fpu.S @@ -273,19 +273,11 @@ FPD_THREE_IN(fnmsub) FPD_THREE_IN(fnmadd) _GLOBAL(kvm_cvt_fd) - lfd 0,0(r5) /* load up fpscr value */ - MTFSF_L(0) lfs 0,0(r3) stfd 0,0(r4) - mffs 0 - stfd 0,0(r5) /* save new fpscr value */ blr _GLOBAL(kvm_cvt_df) - lfd 0,0(r5) /* load up fpscr value */ - MTFSF_L(0) lfd 0,0(r3) stfs 0,0(r4) - mffs 0 - stfd 0,0(r5) /* save new fpscr value */ blr diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 5bb89c828070..889f2bc106dd 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -4,9 +4,7 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror -ifeq ($(CONFIG_PPC64),y) -EXTRA_CFLAGS += -mno-minimal-toc -endif +ccflags-$(CONFIG_PPC64) := -mno-minimal-toc CFLAGS_REMOVE_code-patching.o = -pg CFLAGS_REMOVE_feature-fixups.o = -pg @@ -17,7 +15,8 @@ obj-$(CONFIG_PPC32) += div64.o copy_32.o obj-$(CONFIG_HAS_IOMEM) += devres.o obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ - memcpy_64.o usercopy_64.o mem_64.o string.o + memcpy_64.o usercopy_64.o mem_64.o string.o \ + checksum_wrappers_64.o obj-$(CONFIG_XMON) += sstep.o ldstfp.o obj-$(CONFIG_KPROBES) += sstep.o ldstfp.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += sstep.o ldstfp.o diff --git a/arch/powerpc/lib/checksum_64.S b/arch/powerpc/lib/checksum_64.S index ef96c6c58efc..18245af38aea 100644 --- a/arch/powerpc/lib/checksum_64.S +++ b/arch/powerpc/lib/checksum_64.S @@ -65,165 +65,393 @@ _GLOBAL(csum_tcpudp_magic) srwi r3,r3,16 blr +#define STACKFRAMESIZE 256 +#define STK_REG(i) (112 + ((i)-14)*8) + /* * Computes the checksum of a memory block at buff, length len, * and adds in "sum" (32-bit). * - * This code assumes at least halfword alignment, though the length - * can be any number of bytes. The sum is accumulated in r5. - * * csum_partial(r3=buff, r4=len, r5=sum) */ _GLOBAL(csum_partial) - subi r3,r3,8 /* we'll offset by 8 for the loads */ - srdi. r6,r4,3 /* divide by 8 for doubleword count */ - addic r5,r5,0 /* clear carry */ - beq 3f /* if we're doing < 8 bytes */ - andi. r0,r3,2 /* aligned on a word boundary already? */ - beq+ 1f - lhz r6,8(r3) /* do 2 bytes to get aligned */ - addi r3,r3,2 - subi r4,r4,2 - addc r5,r5,r6 - srdi. r6,r4,3 /* recompute number of doublewords */ - beq 3f /* any left? */ -1: mtctr r6 -2: ldu r6,8(r3) /* main sum loop */ - adde r5,r5,r6 - bdnz 2b - andi. r4,r4,7 /* compute bytes left to sum after doublewords */ -3: cmpwi 0,r4,4 /* is at least a full word left? */ - blt 4f - lwz r6,8(r3) /* sum this word */ + addic r0,r5,0 /* clear carry */ + + srdi. r6,r4,3 /* less than 8 bytes? */ + beq .Lcsum_tail_word + + /* + * If only halfword aligned, align to a double word. Since odd + * aligned addresses should be rare and they would require more + * work to calculate the correct checksum, we ignore that case + * and take the potential slowdown of unaligned loads. + */ + rldicl. r6,r3,64-1,64-2 /* r6 = (r3 & 0x3) >> 1 */ + beq .Lcsum_aligned + + li r7,4 + sub r6,r7,r6 + mtctr r6 + +1: + lhz r6,0(r3) /* align to doubleword */ + subi r4,r4,2 + addi r3,r3,2 + adde r0,r0,r6 + bdnz 1b + +.Lcsum_aligned: + /* + * We unroll the loop such that each iteration is 64 bytes with an + * entry and exit limb of 64 bytes, meaning a minimum size of + * 128 bytes. + */ + srdi. r6,r4,7 + beq .Lcsum_tail_doublewords /* len < 128 */ + + srdi r6,r4,6 + subi r6,r6,1 + mtctr r6 + + stdu r1,-STACKFRAMESIZE(r1) + std r14,STK_REG(r14)(r1) + std r15,STK_REG(r15)(r1) + std r16,STK_REG(r16)(r1) + + ld r6,0(r3) + ld r9,8(r3) + + ld r10,16(r3) + ld r11,24(r3) + + /* + * On POWER6 and POWER7 back to back addes take 2 cycles because of + * the XER dependency. This means the fastest this loop can go is + * 16 cycles per iteration. The scheduling of the loop below has + * been shown to hit this on both POWER6 and POWER7. + */ + .align 5 +2: + adde r0,r0,r6 + ld r12,32(r3) + ld r14,40(r3) + + adde r0,r0,r9 + ld r15,48(r3) + ld r16,56(r3) + addi r3,r3,64 + + adde r0,r0,r10 + + adde r0,r0,r11 + + adde r0,r0,r12 + + adde r0,r0,r14 + + adde r0,r0,r15 + ld r6,0(r3) + ld r9,8(r3) + + adde r0,r0,r16 + ld r10,16(r3) + ld r11,24(r3) + bdnz 2b + + + adde r0,r0,r6 + ld r12,32(r3) + ld r14,40(r3) + + adde r0,r0,r9 + ld r15,48(r3) + ld r16,56(r3) + addi r3,r3,64 + + adde r0,r0,r10 + adde r0,r0,r11 + adde r0,r0,r12 + adde r0,r0,r14 + adde r0,r0,r15 + adde r0,r0,r16 + + ld r14,STK_REG(r14)(r1) + ld r15,STK_REG(r15)(r1) + ld r16,STK_REG(r16)(r1) + addi r1,r1,STACKFRAMESIZE + + andi. r4,r4,63 + +.Lcsum_tail_doublewords: /* Up to 127 bytes to go */ + srdi. r6,r4,3 + beq .Lcsum_tail_word + + mtctr r6 +3: + ld r6,0(r3) + addi r3,r3,8 + adde r0,r0,r6 + bdnz 3b + + andi. r4,r4,7 + +.Lcsum_tail_word: /* Up to 7 bytes to go */ + srdi. r6,r4,2 + beq .Lcsum_tail_halfword + + lwz r6,0(r3) addi r3,r3,4 + adde r0,r0,r6 subi r4,r4,4 - adde r5,r5,r6 -4: cmpwi 0,r4,2 /* is at least a halfword left? */ - blt+ 5f - lhz r6,8(r3) /* sum this halfword */ - addi r3,r3,2 - subi r4,r4,2 - adde r5,r5,r6 -5: cmpwi 0,r4,1 /* is at least a byte left? */ - bne+ 6f - lbz r6,8(r3) /* sum this byte */ - slwi r6,r6,8 /* this byte is assumed to be the upper byte of a halfword */ - adde r5,r5,r6 -6: addze r5,r5 /* add in final carry */ - rldicl r4,r5,32,0 /* fold two 32-bit halves together */ - add r3,r4,r5 - srdi r3,r3,32 - blr + +.Lcsum_tail_halfword: /* Up to 3 bytes to go */ + srdi. r6,r4,1 + beq .Lcsum_tail_byte + + lhz r6,0(r3) + addi r3,r3,2 + adde r0,r0,r6 + subi r4,r4,2 + +.Lcsum_tail_byte: /* Up to 1 byte to go */ + andi. r6,r4,1 + beq .Lcsum_finish + + lbz r6,0(r3) + sldi r9,r6,8 /* Pad the byte out to 16 bits */ + adde r0,r0,r9 + +.Lcsum_finish: + addze r0,r0 /* add in final carry */ + rldicl r4,r0,32,0 /* fold two 32 bit halves together */ + add r3,r4,r0 + srdi r3,r3,32 + blr + + + .macro source +100: + .section __ex_table,"a" + .align 3 + .llong 100b,.Lsrc_error + .previous + .endm + + .macro dest +200: + .section __ex_table,"a" + .align 3 + .llong 200b,.Ldest_error + .previous + .endm /* * Computes the checksum of a memory block at src, length len, * and adds in "sum" (32-bit), while copying the block to dst. * If an access exception occurs on src or dst, it stores -EFAULT - * to *src_err or *dst_err respectively, and (for an error on - * src) zeroes the rest of dst. - * - * This code needs to be reworked to take advantage of 64 bit sum+copy. - * However, due to tokenring halfword alignment problems this will be very - * tricky. For now we'll leave it until we instrument it somehow. + * to *src_err or *dst_err respectively. The caller must take any action + * required in this case (zeroing memory, recalculating partial checksum etc). * * csum_partial_copy_generic(r3=src, r4=dst, r5=len, r6=sum, r7=src_err, r8=dst_err) */ _GLOBAL(csum_partial_copy_generic) - addic r0,r6,0 - subi r3,r3,4 - subi r4,r4,4 - srwi. r6,r5,2 - beq 3f /* if we're doing < 4 bytes */ - andi. r9,r4,2 /* Align dst to longword boundary */ - beq+ 1f -81: lhz r6,4(r3) /* do 2 bytes to get aligned */ - addi r3,r3,2 + addic r0,r6,0 /* clear carry */ + + srdi. r6,r5,3 /* less than 8 bytes? */ + beq .Lcopy_tail_word + + /* + * If only halfword aligned, align to a double word. Since odd + * aligned addresses should be rare and they would require more + * work to calculate the correct checksum, we ignore that case + * and take the potential slowdown of unaligned loads. + * + * If the source and destination are relatively unaligned we only + * align the source. This keeps things simple. + */ + rldicl. r6,r3,64-1,64-2 /* r6 = (r3 & 0x3) >> 1 */ + beq .Lcopy_aligned + + li r7,4 + sub r6,r7,r6 + mtctr r6 + +1: +source; lhz r6,0(r3) /* align to doubleword */ subi r5,r5,2 -91: sth r6,4(r4) - addi r4,r4,2 - addc r0,r0,r6 - srwi. r6,r5,2 /* # words to do */ - beq 3f -1: mtctr r6 -82: lwzu r6,4(r3) /* the bdnz has zero overhead, so it should */ -92: stwu r6,4(r4) /* be unnecessary to unroll this loop */ - adde r0,r0,r6 - bdnz 82b - andi. r5,r5,3 -3: cmpwi 0,r5,2 - blt+ 4f -83: lhz r6,4(r3) addi r3,r3,2 - subi r5,r5,2 -93: sth r6,4(r4) + adde r0,r0,r6 +dest; sth r6,0(r4) addi r4,r4,2 + bdnz 1b + +.Lcopy_aligned: + /* + * We unroll the loop such that each iteration is 64 bytes with an + * entry and exit limb of 64 bytes, meaning a minimum size of + * 128 bytes. + */ + srdi. r6,r5,7 + beq .Lcopy_tail_doublewords /* len < 128 */ + + srdi r6,r5,6 + subi r6,r6,1 + mtctr r6 + + stdu r1,-STACKFRAMESIZE(r1) + std r14,STK_REG(r14)(r1) + std r15,STK_REG(r15)(r1) + std r16,STK_REG(r16)(r1) + +source; ld r6,0(r3) +source; ld r9,8(r3) + +source; ld r10,16(r3) +source; ld r11,24(r3) + + /* + * On POWER6 and POWER7 back to back addes take 2 cycles because of + * the XER dependency. This means the fastest this loop can go is + * 16 cycles per iteration. The scheduling of the loop below has + * been shown to hit this on both POWER6 and POWER7. + */ + .align 5 +2: adde r0,r0,r6 -4: cmpwi 0,r5,1 - bne+ 5f -84: lbz r6,4(r3) -94: stb r6,4(r4) - slwi r6,r6,8 /* Upper byte of word */ +source; ld r12,32(r3) +source; ld r14,40(r3) + + adde r0,r0,r9 +source; ld r15,48(r3) +source; ld r16,56(r3) + addi r3,r3,64 + + adde r0,r0,r10 +dest; std r6,0(r4) +dest; std r9,8(r4) + + adde r0,r0,r11 +dest; std r10,16(r4) +dest; std r11,24(r4) + + adde r0,r0,r12 +dest; std r12,32(r4) +dest; std r14,40(r4) + + adde r0,r0,r14 +dest; std r15,48(r4) +dest; std r16,56(r4) + addi r4,r4,64 + + adde r0,r0,r15 +source; ld r6,0(r3) +source; ld r9,8(r3) + + adde r0,r0,r16 +source; ld r10,16(r3) +source; ld r11,24(r3) + bdnz 2b + + adde r0,r0,r6 -5: addze r3,r0 /* add in final carry (unlikely with 64-bit regs) */ - rldicl r4,r3,32,0 /* fold 64 bit value */ - add r3,r4,r3 - srdi r3,r3,32 - blr +source; ld r12,32(r3) +source; ld r14,40(r3) -/* These shouldn't go in the fixup section, since that would - cause the ex_table addresses to get out of order. */ + adde r0,r0,r9 +source; ld r15,48(r3) +source; ld r16,56(r3) + addi r3,r3,64 + + adde r0,r0,r10 +dest; std r6,0(r4) +dest; std r9,8(r4) + + adde r0,r0,r11 +dest; std r10,16(r4) +dest; std r11,24(r4) + + adde r0,r0,r12 +dest; std r12,32(r4) +dest; std r14,40(r4) + + adde r0,r0,r14 +dest; std r15,48(r4) +dest; std r16,56(r4) + addi r4,r4,64 + + adde r0,r0,r15 + adde r0,r0,r16 + + ld r14,STK_REG(r14)(r1) + ld r15,STK_REG(r15)(r1) + ld r16,STK_REG(r16)(r1) + addi r1,r1,STACKFRAMESIZE + + andi. r5,r5,63 + +.Lcopy_tail_doublewords: /* Up to 127 bytes to go */ + srdi. r6,r5,3 + beq .Lcopy_tail_word - .globl src_error_1 -src_error_1: - li r6,0 - subi r5,r5,2 -95: sth r6,4(r4) - addi r4,r4,2 - srwi. r6,r5,2 - beq 3f mtctr r6 - .globl src_error_2 -src_error_2: - li r6,0 -96: stwu r6,4(r4) - bdnz 96b -3: andi. r5,r5,3 - beq src_error - .globl src_error_3 -src_error_3: - li r6,0 - mtctr r5 - addi r4,r4,3 -97: stbu r6,1(r4) - bdnz 97b - .globl src_error -src_error: +3: +source; ld r6,0(r3) + addi r3,r3,8 + adde r0,r0,r6 +dest; std r6,0(r4) + addi r4,r4,8 + bdnz 3b + + andi. r5,r5,7 + +.Lcopy_tail_word: /* Up to 7 bytes to go */ + srdi. r6,r5,2 + beq .Lcopy_tail_halfword + +source; lwz r6,0(r3) + addi r3,r3,4 + adde r0,r0,r6 +dest; stw r6,0(r4) + addi r4,r4,4 + subi r5,r5,4 + +.Lcopy_tail_halfword: /* Up to 3 bytes to go */ + srdi. r6,r5,1 + beq .Lcopy_tail_byte + +source; lhz r6,0(r3) + addi r3,r3,2 + adde r0,r0,r6 +dest; sth r6,0(r4) + addi r4,r4,2 + subi r5,r5,2 + +.Lcopy_tail_byte: /* Up to 1 byte to go */ + andi. r6,r5,1 + beq .Lcopy_finish + +source; lbz r6,0(r3) + sldi r9,r6,8 /* Pad the byte out to 16 bits */ + adde r0,r0,r9 +dest; stb r6,0(r4) + +.Lcopy_finish: + addze r0,r0 /* add in final carry */ + rldicl r4,r0,32,0 /* fold two 32 bit halves together */ + add r3,r4,r0 + srdi r3,r3,32 + blr + +.Lsrc_error: cmpdi 0,r7,0 - beq 1f + beqlr li r6,-EFAULT stw r6,0(r7) -1: addze r3,r0 blr - .globl dst_error -dst_error: +.Ldest_error: cmpdi 0,r8,0 - beq 1f + beqlr li r6,-EFAULT stw r6,0(r8) -1: addze r3,r0 blr - -.section __ex_table,"a" - .align 3 - .llong 81b,src_error_1 - .llong 91b,dst_error - .llong 82b,src_error_2 - .llong 92b,dst_error - .llong 83b,src_error_3 - .llong 93b,dst_error - .llong 84b,src_error_3 - .llong 94b,dst_error - .llong 95b,dst_error - .llong 96b,dst_error - .llong 97b,dst_error diff --git a/arch/powerpc/lib/checksum_wrappers_64.c b/arch/powerpc/lib/checksum_wrappers_64.c new file mode 100644 index 000000000000..769b817fbb32 --- /dev/null +++ b/arch/powerpc/lib/checksum_wrappers_64.c @@ -0,0 +1,102 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2010 + * + * Author: Anton Blanchard <anton@au.ibm.com> + */ +#include <linux/module.h> +#include <linux/compiler.h> +#include <linux/types.h> +#include <asm/checksum.h> +#include <asm/uaccess.h> + +__wsum csum_and_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *err_ptr) +{ + unsigned int csum; + + might_sleep(); + + *err_ptr = 0; + + if (!len) { + csum = 0; + goto out; + } + + if (unlikely((len < 0) || !access_ok(VERIFY_READ, src, len))) { + *err_ptr = -EFAULT; + csum = (__force unsigned int)sum; + goto out; + } + + csum = csum_partial_copy_generic((void __force *)src, dst, + len, sum, err_ptr, NULL); + + if (unlikely(*err_ptr)) { + int missing = __copy_from_user(dst, src, len); + + if (missing) { + memset(dst + len - missing, 0, missing); + *err_ptr = -EFAULT; + } else { + *err_ptr = 0; + } + + csum = csum_partial(dst, len, sum); + } + +out: + return (__force __wsum)csum; +} +EXPORT_SYMBOL(csum_and_copy_from_user); + +__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len, + __wsum sum, int *err_ptr) +{ + unsigned int csum; + + might_sleep(); + + *err_ptr = 0; + + if (!len) { + csum = 0; + goto out; + } + + if (unlikely((len < 0) || !access_ok(VERIFY_WRITE, dst, len))) { + *err_ptr = -EFAULT; + csum = -1; /* invalid checksum */ + goto out; + } + + csum = csum_partial_copy_generic(src, (void __force *)dst, + len, sum, NULL, err_ptr); + + if (unlikely(*err_ptr)) { + csum = csum_partial(src, len, sum); + + if (copy_to_user(dst, src, len)) { + *err_ptr = -EFAULT; + csum = -1; /* invalid checksum */ + } + } + +out: + return (__force __wsum)csum; +} +EXPORT_SYMBOL(csum_and_copy_to_user); diff --git a/arch/powerpc/lib/copy_32.S b/arch/powerpc/lib/copy_32.S index 74a7f4130b4c..55f19f9fd708 100644 --- a/arch/powerpc/lib/copy_32.S +++ b/arch/powerpc/lib/copy_32.S @@ -62,7 +62,7 @@ .text .stabs "arch/powerpc/lib/",N_SO,0,0,0f - .stabs "copy32.S",N_SO,0,0,0f + .stabs "copy_32.S",N_SO,0,0,0f 0: CACHELINE_BYTES = L1_CACHE_BYTES diff --git a/arch/powerpc/lib/ldstfp.S b/arch/powerpc/lib/ldstfp.S index f6448636baf5..6a85380520b6 100644 --- a/arch/powerpc/lib/ldstfp.S +++ b/arch/powerpc/lib/ldstfp.S @@ -17,6 +17,8 @@ #include <asm/asm-offsets.h> #include <linux/errno.h> +#ifdef CONFIG_PPC_FPU + #define STKFRM (PPC_MIN_STKFRM + 16) .macro extab instr,handler @@ -81,7 +83,7 @@ _GLOBAL(do_lfs) mfmsr r6 ori r7,r6,MSR_FP cmpwi cr7,r3,0 - mtmsrd r7 + MTMSRD(r7) isync beq cr7,1f stfd fr0,STKFRM-16(r1) @@ -93,7 +95,7 @@ _GLOBAL(do_lfs) lfd fr0,STKFRM-16(r1) 4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) mtlr r0 - mtmsrd r6 + MTMSRD(r6) isync mr r3,r9 addi r1,r1,STKFRM @@ -108,7 +110,7 @@ _GLOBAL(do_lfd) mfmsr r6 ori r7,r6,MSR_FP cmpwi cr7,r3,0 - mtmsrd r7 + MTMSRD(r7) isync beq cr7,1f stfd fr0,STKFRM-16(r1) @@ -120,7 +122,7 @@ _GLOBAL(do_lfd) lfd fr0,STKFRM-16(r1) 4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) mtlr r0 - mtmsrd r6 + MTMSRD(r6) isync mr r3,r9 addi r1,r1,STKFRM @@ -135,7 +137,7 @@ _GLOBAL(do_stfs) mfmsr r6 ori r7,r6,MSR_FP cmpwi cr7,r3,0 - mtmsrd r7 + MTMSRD(r7) isync beq cr7,1f stfd fr0,STKFRM-16(r1) @@ -147,7 +149,7 @@ _GLOBAL(do_stfs) lfd fr0,STKFRM-16(r1) 4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) mtlr r0 - mtmsrd r6 + MTMSRD(r6) isync mr r3,r9 addi r1,r1,STKFRM @@ -162,7 +164,7 @@ _GLOBAL(do_stfd) mfmsr r6 ori r7,r6,MSR_FP cmpwi cr7,r3,0 - mtmsrd r7 + MTMSRD(r7) isync beq cr7,1f stfd fr0,STKFRM-16(r1) @@ -174,7 +176,7 @@ _GLOBAL(do_stfd) lfd fr0,STKFRM-16(r1) 4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) mtlr r0 - mtmsrd r6 + MTMSRD(r6) isync mr r3,r9 addi r1,r1,STKFRM @@ -229,7 +231,7 @@ _GLOBAL(do_lvx) oris r7,r6,MSR_VEC@h cmpwi cr7,r3,0 li r8,STKFRM-16 - mtmsrd r7 + MTMSRD(r7) isync beq cr7,1f stvx vr0,r1,r8 @@ -241,7 +243,7 @@ _GLOBAL(do_lvx) lvx vr0,r1,r8 4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) mtlr r0 - mtmsrd r6 + MTMSRD(r6) isync mr r3,r9 addi r1,r1,STKFRM @@ -257,7 +259,7 @@ _GLOBAL(do_stvx) oris r7,r6,MSR_VEC@h cmpwi cr7,r3,0 li r8,STKFRM-16 - mtmsrd r7 + MTMSRD(r7) isync beq cr7,1f stvx vr0,r1,r8 @@ -269,7 +271,7 @@ _GLOBAL(do_stvx) lvx vr0,r1,r8 4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) mtlr r0 - mtmsrd r6 + MTMSRD(r6) isync mr r3,r9 addi r1,r1,STKFRM @@ -325,7 +327,7 @@ _GLOBAL(do_lxvd2x) oris r7,r6,MSR_VSX@h cmpwi cr7,r3,0 li r8,STKFRM-16 - mtmsrd r7 + MTMSRD(r7) isync beq cr7,1f STXVD2X(0,r1,r8) @@ -337,7 +339,7 @@ _GLOBAL(do_lxvd2x) LXVD2X(0,r1,r8) 4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) mtlr r0 - mtmsrd r6 + MTMSRD(r6) isync mr r3,r9 addi r1,r1,STKFRM @@ -353,7 +355,7 @@ _GLOBAL(do_stxvd2x) oris r7,r6,MSR_VSX@h cmpwi cr7,r3,0 li r8,STKFRM-16 - mtmsrd r7 + MTMSRD(r7) isync beq cr7,1f STXVD2X(0,r1,r8) @@ -365,7 +367,7 @@ _GLOBAL(do_stxvd2x) LXVD2X(0,r1,r8) 4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) mtlr r0 - mtmsrd r6 + MTMSRD(r6) isync mr r3,r9 addi r1,r1,STKFRM @@ -373,3 +375,5 @@ _GLOBAL(do_stxvd2x) extab 2b,3b #endif /* CONFIG_VSX */ + +#endif /* CONFIG_PPC_FPU */ diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c index 58e14fba11b1..9b8182e82166 100644 --- a/arch/powerpc/lib/locks.c +++ b/arch/powerpc/lib/locks.c @@ -34,7 +34,7 @@ void __spin_yield(arch_spinlock_t *lock) return; holder_cpu = lock_value & 0xffff; BUG_ON(holder_cpu >= NR_CPUS); - yield_count = lppaca[holder_cpu].yield_count; + yield_count = lppaca_of(holder_cpu).yield_count; if ((yield_count & 1) == 0) return; /* virtual cpu is currently running */ rmb(); @@ -65,7 +65,7 @@ void __rw_yield(arch_rwlock_t *rw) return; /* no write lock at present */ holder_cpu = lock_value & 0xffff; BUG_ON(holder_cpu >= NR_CPUS); - yield_count = lppaca[holder_cpu].yield_count; + yield_count = lppaca_of(holder_cpu).yield_count; if ((yield_count & 1) == 0) return; /* virtual cpu is currently running */ rmb(); diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c index e0a9858d537e..ae5189ab0049 100644 --- a/arch/powerpc/lib/sstep.c +++ b/arch/powerpc/lib/sstep.c @@ -30,6 +30,7 @@ extern char system_call_common[]; #define XER_OV 0x40000000U #define XER_CA 0x20000000U +#ifdef CONFIG_PPC_FPU /* * Functions in ldstfp.S */ @@ -41,6 +42,7 @@ extern int do_lvx(int rn, unsigned long ea); extern int do_stvx(int rn, unsigned long ea); extern int do_lxvd2x(int rn, unsigned long ea); extern int do_stxvd2x(int rn, unsigned long ea); +#endif /* * Determine whether a conditional branch instruction would branch. @@ -290,6 +292,7 @@ static int __kprobes write_mem(unsigned long val, unsigned long ea, int nb, return write_mem_unaligned(val, ea, nb, regs); } +#ifdef CONFIG_PPC_FPU /* * Check the address and alignment, and call func to do the actual * load or store. @@ -351,6 +354,7 @@ static int __kprobes do_fp_store(int rn, int (*func)(int, unsigned long), } return err; } +#endif #ifdef CONFIG_ALTIVEC /* For Altivec/VMX, no need to worry about alignment */ @@ -1393,6 +1397,7 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) regs->gpr[rd] = byterev_4(val); goto ldst_done; +#ifdef CONFIG_PPC_CPU case 535: /* lfsx */ case 567: /* lfsux */ if (!(regs->msr & MSR_FP)) @@ -1424,6 +1429,7 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) ea = xform_ea(instr, regs, u); err = do_fp_store(rd, do_stfd, ea, 8, regs); goto ldst_done; +#endif #ifdef __powerpc64__ case 660: /* stdbrx */ @@ -1534,6 +1540,7 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) } while (++rd < 32); goto instr_done; +#ifdef CONFIG_PPC_FPU case 48: /* lfs */ case 49: /* lfsu */ if (!(regs->msr & MSR_FP)) @@ -1565,6 +1572,7 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) ea = dform_ea(instr, regs); err = do_fp_store(rd, do_stfd, ea, 8, regs); goto ldst_done; +#endif #ifdef __powerpc64__ case 58: /* ld[u], lwa */ diff --git a/arch/powerpc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile index 0c16ab947f1f..7d1dba0d57f9 100644 --- a/arch/powerpc/math-emu/Makefile +++ b/arch/powerpc/math-emu/Makefile @@ -15,4 +15,4 @@ obj-$(CONFIG_SPE) += math_efp.o CFLAGS_fabs.o = -fno-builtin-fabs CFLAGS_math.o = -fno-builtin-fabs -EXTRA_CFLAGS = -I. -Iinclude/math-emu -w +ccflags-y = -I. -Iinclude/math-emu -w diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index 1dc2fa5ce1bd..5810967511d4 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -35,6 +35,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/highmem.h> +#include <linux/memblock.h> #include <asm/pgalloc.h> #include <asm/prom.h> @@ -47,6 +48,7 @@ #include <asm/bootx.h> #include <asm/machdep.h> #include <asm/setup.h> + #include "mmu_decl.h" extern int __map_without_ltlbs; @@ -139,8 +141,19 @@ unsigned long __init mmu_mapin_ram(unsigned long top) * coverage with normal-sized pages (or other reasons) do not * attempt to allocate outside the allowed range. */ - - __initial_memory_limit_addr = memstart_addr + mapped; + memblock_set_current_limit(mapped); return mapped; } + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + + /* 40x can only access 16MB at the moment (see head_40x.S) */ + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000)); +} diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index d8c6efb32bc6..024acab588fd 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -24,6 +24,8 @@ */ #include <linux/init.h> +#include <linux/memblock.h> + #include <asm/mmu.h> #include <asm/system.h> #include <asm/page.h> @@ -213,6 +215,18 @@ unsigned long __init mmu_mapin_ram(unsigned long top) return total_lowmem; } +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + + /* 44x has a 256M TLB entry pinned at boot */ + memblock_set_current_limit(min_t(u64, first_memblock_size, PPC_PIN_SIZE)); +} + #ifdef CONFIG_SMP void __cpuinit mmu_init_secondary(int cpu) { diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index ce68708bbad5..bdca46e08382 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -4,9 +4,7 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror -ifeq ($(CONFIG_PPC64),y) -EXTRA_CFLAGS += -mno-minimal-toc -endif +ccflags-$(CONFIG_PPC64) := -mno-minimal-toc obj-y := fault.o mem.o pgtable.o gup.o \ init_$(CONFIG_WORD_SIZE).o \ @@ -25,7 +23,7 @@ obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \ mmu_context_hash$(CONFIG_WORD_SIZE).o obj-$(CONFIG_40x) += 40x_mmu.o obj-$(CONFIG_44x) += 44x_mmu.o -obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o +obj-$(CONFIG_PPC_FSL_BOOK3E) += fsl_booke_mmu.o obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o obj-$(CONFIG_PPC_MM_SLICES) += slice.o ifeq ($(CONFIG_HUGETLB_PAGE),y) diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 1bd712c33ce2..54f4fb994e99 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -30,6 +30,7 @@ #include <linux/kprobes.h> #include <linux/kdebug.h> #include <linux/perf_event.h> +#include <linux/magic.h> #include <asm/firmware.h> #include <asm/page.h> @@ -385,6 +386,7 @@ do_sigbus: void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) { const struct exception_table_entry *entry; + unsigned long *stackend; /* Are we prepared to handle this fault? */ if ((entry = search_exception_tables(regs->nip)) != NULL) { @@ -413,5 +415,9 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n", regs->nip); + stackend = end_of_stack(current); + if (current != &init_task && *stackend != STACK_END_MAGIC) + printk(KERN_ALERT "Thread overran stack, or stack corrupted\n"); + die("Kernel access of bad area", regs, sig); } diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index 4b66a1ece6d8..f7802c8bba0a 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -40,6 +40,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/highmem.h> +#include <linux/memblock.h> #include <asm/pgalloc.h> #include <asm/prom.h> @@ -56,11 +57,6 @@ unsigned int tlbcam_index; - -#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) -#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS" -#endif - #define NUM_TLBCAMS (64) struct tlbcam TLBCAM[NUM_TLBCAMS]; @@ -137,7 +133,8 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, if (mmu_has_feature(MMU_FTR_BIG_PHYS)) TLBCAM[index].MAS7 = (u64)phys >> 32; - if (flags & _PAGE_USER) { + /* Below is unlikely -- only for large user pages or similar */ + if (pte_user(flags)) { TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); } @@ -184,6 +181,12 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) return amount_mapped; } +#ifdef CONFIG_PPC32 + +#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) +#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS" +#endif + unsigned long __init mmu_mapin_ram(unsigned long top) { return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1; @@ -213,5 +216,15 @@ void __init adjust_total_lowmem(void) pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20, (unsigned int)((total_lowmem - __max_low_memory) >> 20)); - __initial_memory_limit_addr = memstart_addr + __max_low_memory; + memblock_set_current_limit(memstart_addr + __max_low_memory); } + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + phys_addr_t limit = first_memblock_base + first_memblock_size; + + /* 64M mapped initially according to head_fsl_booke.S */ + memblock_set_current_limit(min_t(u64, limit, 0x04000000)); +} +#endif diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 09dffe6efa46..83f534d862db 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -588,7 +588,7 @@ static void __init htab_initialize(void) unsigned long pteg_count; unsigned long prot; unsigned long base = 0, size = 0, limit; - int i; + struct memblock_region *reg; DBG(" -> htab_initialize()\n"); @@ -625,7 +625,7 @@ static void __init htab_initialize(void) if (machine_is(cell)) limit = 0x80000000; else - limit = 0; + limit = MEMBLOCK_ALLOC_ANYWHERE; table = memblock_alloc_base(htab_size_bytes, htab_size_bytes, limit); @@ -649,7 +649,7 @@ static void __init htab_initialize(void) #ifdef CONFIG_DEBUG_PAGEALLOC linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT; linear_map_hash_slots = __va(memblock_alloc_base(linear_map_hash_count, - 1, memblock.rmo_size)); + 1, ppc64_rma_size)); memset(linear_map_hash_slots, 0, linear_map_hash_count); #endif /* CONFIG_DEBUG_PAGEALLOC */ @@ -659,9 +659,9 @@ static void __init htab_initialize(void) */ /* create bolted the linear mapping in the hash table */ - for (i=0; i < memblock.memory.cnt; i++) { - base = (unsigned long)__va(memblock.memory.region[i].base); - size = memblock.memory.region[i].size; + for_each_memblock(memory, reg) { + base = (unsigned long)__va(reg->base); + size = reg->size; DBG("creating mapping for region: %lx..%lx (prot: %lx)\n", base, size, prot); @@ -696,7 +696,8 @@ static void __init htab_initialize(void) #endif /* CONFIG_U3_DART */ BUG_ON(htab_bolt_mapping(base, base + size, __pa(base), prot, mmu_linear_psize, mmu_kernel_ssize)); - } + } + memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE); /* * If we have a memory_limit and we've allocated TCEs then we need to @@ -1247,3 +1248,23 @@ void kernel_map_pages(struct page *page, int numpages, int enable) local_irq_restore(flags); } #endif /* CONFIG_DEBUG_PAGEALLOC */ + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + + /* On LPAR systems, the first entry is our RMA region, + * non-LPAR 64-bit hash MMU systems don't have a limitation + * on real mode access, but using the first entry works well + * enough. We also clamp it to 1G to avoid some funky things + * such as RTAS bugs etc... + */ + ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000); + + /* Finally limit subsequent allocations */ + memblock_set_current_limit(ppc64_rma_size); +} diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 6a6975dc2654..742da43b4ab6 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -92,12 +92,6 @@ int __allow_ioremap_reserved; unsigned long __max_low_memory = MAX_LOW_MEM; /* - * address of the limit of what is accessible with initial MMU setup - - * 256MB usually, but only 16MB on 601. - */ -phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000; - -/* * Check for command-line options that affect what MMU_init will do. */ void MMU_setup(void) @@ -126,13 +120,6 @@ void __init MMU_init(void) if (ppc_md.progress) ppc_md.progress("MMU:enter", 0x111); - /* 601 can only access 16MB at the moment */ - if (PVR_VER(mfspr(SPRN_PVR)) == 1) - __initial_memory_limit_addr = 0x01000000; - /* 8xx can only access 8MB at the moment */ - if (PVR_VER(mfspr(SPRN_PVR)) == 0x50) - __initial_memory_limit_addr = 0x00800000; - /* parse args from command line */ MMU_setup(); @@ -190,20 +177,18 @@ void __init MMU_init(void) #ifdef CONFIG_BOOTX_TEXT btext_unmap(); #endif + + /* Shortly after that, the entire linear mapping will be available */ + memblock_set_current_limit(lowmem_end_addr); } /* This is only called until mem_init is done. */ void __init *early_get_page(void) { - void *p; - - if (init_bootmem_done) { - p = alloc_bootmem_pages(PAGE_SIZE); - } else { - p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE, - __initial_memory_limit_addr)); - } - return p; + if (init_bootmem_done) + return alloc_bootmem_pages(PAGE_SIZE); + else + return __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE)); } /* Free up now-unused memory */ @@ -252,3 +237,17 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif + +#ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */ +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + + /* 8xx can only access 8MB at the moment */ + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000)); +} +#endif /* CONFIG_8xx */ diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index ace85fa74b29..6374b2196a17 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -330,3 +330,4 @@ int __meminit vmemmap_populate(struct page *start_page, return 0; } #endif /* CONFIG_SPARSEMEM_VMEMMAP */ + diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 1a84a8d00005..a66499650909 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -82,18 +82,11 @@ int page_is_ram(unsigned long pfn) return pfn < max_pfn; #else unsigned long paddr = (pfn << PAGE_SHIFT); - int i; - for (i=0; i < memblock.memory.cnt; i++) { - unsigned long base; + struct memblock_region *reg; - base = memblock.memory.region[i].base; - - if ((paddr >= base) && - (paddr < (base + memblock.memory.region[i].size))) { + for_each_memblock(memory, reg) + if (paddr >= reg->base && paddr < (reg->base + reg->size)) return 1; - } - } - return 0; #endif } @@ -149,23 +142,19 @@ int walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, void *arg, int (*func)(unsigned long, unsigned long, void *)) { - struct memblock_property res; - unsigned long pfn, len; - u64 end; + struct memblock_region *reg; + unsigned long end_pfn = start_pfn + nr_pages; + unsigned long tstart, tend; int ret = -1; - res.base = (u64) start_pfn << PAGE_SHIFT; - res.size = (u64) nr_pages << PAGE_SHIFT; - - end = res.base + res.size - 1; - while ((res.base < end) && (memblock_find(&res) >= 0)) { - pfn = (unsigned long)(res.base >> PAGE_SHIFT); - len = (unsigned long)(res.size >> PAGE_SHIFT); - ret = (*func)(pfn, len, arg); + for_each_memblock(memory, reg) { + tstart = max(start_pfn, memblock_region_memory_base_pfn(reg)); + tend = min(end_pfn, memblock_region_memory_end_pfn(reg)); + if (tstart >= tend) + continue; + ret = (*func)(tstart, tend - tstart, arg); if (ret) break; - res.base += (res.size + 1); - res.size = (end - res.base + 1); } return ret; } @@ -179,9 +168,9 @@ EXPORT_SYMBOL_GPL(walk_system_ram_range); #ifndef CONFIG_NEED_MULTIPLE_NODES void __init do_init_bootmem(void) { - unsigned long i; unsigned long start, bootmap_pages; unsigned long total_pages; + struct memblock_region *reg; int boot_mapsize; max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT; @@ -204,10 +193,10 @@ void __init do_init_bootmem(void) boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn); /* Add active regions with valid PFNs */ - for (i = 0; i < memblock.memory.cnt; i++) { + for_each_memblock(memory, reg) { unsigned long start_pfn, end_pfn; - start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT; - end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i); + start_pfn = memblock_region_memory_base_pfn(reg); + end_pfn = memblock_region_memory_end_pfn(reg); add_active_range(0, start_pfn, end_pfn); } @@ -218,29 +207,21 @@ void __init do_init_bootmem(void) free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT); /* reserve the sections we're already using */ - for (i = 0; i < memblock.reserved.cnt; i++) { - unsigned long addr = memblock.reserved.region[i].base + - memblock_size_bytes(&memblock.reserved, i) - 1; - if (addr < lowmem_end_addr) - reserve_bootmem(memblock.reserved.region[i].base, - memblock_size_bytes(&memblock.reserved, i), - BOOTMEM_DEFAULT); - else if (memblock.reserved.region[i].base < lowmem_end_addr) { - unsigned long adjusted_size = lowmem_end_addr - - memblock.reserved.region[i].base; - reserve_bootmem(memblock.reserved.region[i].base, - adjusted_size, BOOTMEM_DEFAULT); + for_each_memblock(reserved, reg) { + unsigned long top = reg->base + reg->size - 1; + if (top < lowmem_end_addr) + reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); + else if (reg->base < lowmem_end_addr) { + unsigned long trunc_size = lowmem_end_addr - reg->base; + reserve_bootmem(reg->base, trunc_size, BOOTMEM_DEFAULT); } } #else free_bootmem_with_active_regions(0, max_pfn); /* reserve the sections we're already using */ - for (i = 0; i < memblock.reserved.cnt; i++) - reserve_bootmem(memblock.reserved.region[i].base, - memblock_size_bytes(&memblock.reserved, i), - BOOTMEM_DEFAULT); - + for_each_memblock(reserved, reg) + reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); #endif /* XXX need to clip this if using highmem? */ sparse_memory_present_with_active_regions(0); @@ -251,22 +232,15 @@ void __init do_init_bootmem(void) /* mark pages that don't exist as nosave */ static int __init mark_nonram_nosave(void) { - unsigned long memblock_next_region_start_pfn, - memblock_region_max_pfn; - int i; - - for (i = 0; i < memblock.memory.cnt - 1; i++) { - memblock_region_max_pfn = - (memblock.memory.region[i].base >> PAGE_SHIFT) + - (memblock.memory.region[i].size >> PAGE_SHIFT); - memblock_next_region_start_pfn = - memblock.memory.region[i+1].base >> PAGE_SHIFT; - - if (memblock_region_max_pfn < memblock_next_region_start_pfn) - register_nosave_region(memblock_region_max_pfn, - memblock_next_region_start_pfn); + struct memblock_region *reg, *prev = NULL; + + for_each_memblock(memory, reg) { + if (prev && + memblock_region_memory_end_pfn(prev) < memblock_region_memory_base_pfn(reg)) + register_nosave_region(memblock_region_memory_end_pfn(prev), + memblock_region_memory_base_pfn(reg)); + prev = reg; } - return 0; } @@ -327,7 +301,7 @@ void __init mem_init(void) swiotlb_init(1); #endif - num_physpages = memblock.memory.size >> PAGE_SHIFT; + num_physpages = memblock_phys_mem_size() >> PAGE_SHIFT; high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); #ifdef CONFIG_NEED_MULTIPLE_NODES diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index ddfd7ad4e1d6..5ce99848d91e 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -334,7 +334,7 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self, /* We don't touch CPU 0 map, it's allocated at aboot and kept * around forever */ - if (cpu == 0) + if (cpu == boot_cpuid) return NOTIFY_OK; switch (action) { @@ -420,9 +420,11 @@ void __init mmu_context_init(void) */ context_map = alloc_bootmem(CTX_MAP_SIZE); context_mm = alloc_bootmem(sizeof(void *) * (last_context + 1)); +#ifndef CONFIG_SMP stale_map[0] = alloc_bootmem(CTX_MAP_SIZE); +#else + stale_map[boot_cpuid] = alloc_bootmem(CTX_MAP_SIZE); -#ifdef CONFIG_SMP register_cpu_notifier(&mmu_context_cpu_nb); #endif diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 63b84a0d3b10..dd0a2589591d 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -140,10 +140,13 @@ extern void wii_memory_fixups(void); extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(unsigned long top); -#elif defined(CONFIG_FSL_BOOKE) +#elif defined(CONFIG_PPC_FSL_BOOK3E) +extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx); +#ifdef CONFIG_PPC32 extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(unsigned long top); extern void adjust_total_lowmem(void); +#endif extern void loadcam_entry(unsigned int index); struct tlbcam { diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 002878ccf90b..74505b245374 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -802,16 +802,17 @@ static void __init setup_nonnuma(void) unsigned long top_of_ram = memblock_end_of_DRAM(); unsigned long total_ram = memblock_phys_mem_size(); unsigned long start_pfn, end_pfn; - unsigned int i, nid = 0; + unsigned int nid = 0; + struct memblock_region *reg; printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", top_of_ram, total_ram); printk(KERN_DEBUG "Memory hole size: %ldMB\n", (top_of_ram - total_ram) >> 20); - for (i = 0; i < memblock.memory.cnt; ++i) { - start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT; - end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i); + for_each_memblock(memory, reg) { + start_pfn = memblock_region_memory_base_pfn(reg); + end_pfn = memblock_region_memory_end_pfn(reg); fake_numa_create_new_node(end_pfn, &nid); add_active_range(nid, start_pfn, end_pfn); @@ -947,11 +948,11 @@ static struct notifier_block __cpuinitdata ppc64_numa_nb = { static void mark_reserved_regions_for_nid(int nid) { struct pglist_data *node = NODE_DATA(nid); - int i; + struct memblock_region *reg; - for (i = 0; i < memblock.reserved.cnt; i++) { - unsigned long physbase = memblock.reserved.region[i].base; - unsigned long size = memblock.reserved.region[i].size; + for_each_memblock(reserved, reg) { + unsigned long physbase = reg->base; + unsigned long size = reg->size; unsigned long start_pfn = physbase >> PAGE_SHIFT; unsigned long end_pfn = PFN_UP(physbase + size); struct node_active_region node_ar; diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index f8a01829d64f..11571e118831 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -223,8 +223,7 @@ void __init MMU_init_hw(void) * Find some memory for the hash table. */ if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322); - Hash = __va(memblock_alloc_base(Hash_size, Hash_size, - __initial_memory_limit_addr)); + Hash = __va(memblock_alloc(Hash_size, Hash_size)); cacheable_memzero(Hash, Hash_size); _SDR1 = __pa(Hash) | SDR1_LOW_BITS; @@ -272,3 +271,18 @@ void __init MMU_init_hw(void) if ( ppc_md.progress ) ppc_md.progress("hash:done", 0x205); } + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* We don't currently support the first MEMBLOCK not mapping 0 + * physical on those processors + */ + BUG_ON(first_memblock_base != 0); + + /* 601 can only access 16MB at the moment */ + if (PVR_VER(mfspr(SPRN_PVR)) == 1) + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01000000)); + else /* Anything else has 256M mapped */ + memblock_set_current_limit(min_t(u64, first_memblock_size, 0x10000000)); +} diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index fe391e942521..36c0c449a899 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -349,11 +349,47 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) static void setup_page_sizes(void) { - unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); - unsigned int tlb0ps = mfspr(SPRN_TLB0PS); - unsigned int eptcfg = mfspr(SPRN_EPTCFG); + unsigned int tlb0cfg; + unsigned int tlb0ps; + unsigned int eptcfg; int i, psize; +#ifdef CONFIG_PPC_FSL_BOOK3E + unsigned int mmucfg = mfspr(SPRN_MMUCFG); + + if (((mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) && + (mmu_has_feature(MMU_FTR_TYPE_FSL_E))) { + unsigned int tlb1cfg = mfspr(SPRN_TLB1CFG); + unsigned int min_pg, max_pg; + + min_pg = (tlb1cfg & TLBnCFG_MINSIZE) >> TLBnCFG_MINSIZE_SHIFT; + max_pg = (tlb1cfg & TLBnCFG_MAXSIZE) >> TLBnCFG_MAXSIZE_SHIFT; + + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + struct mmu_psize_def *def; + unsigned int shift; + + def = &mmu_psize_defs[psize]; + shift = def->shift; + + if (shift == 0) + continue; + + /* adjust to be in terms of 4^shift Kb */ + shift = (shift - 10) >> 1; + + if ((shift >= min_pg) && (shift <= max_pg)) + def->flags |= MMU_PAGE_SIZE_DIRECT; + } + + goto no_indirect; + } +#endif + + tlb0cfg = mfspr(SPRN_TLB0CFG); + tlb0ps = mfspr(SPRN_TLB0PS); + eptcfg = mfspr(SPRN_EPTCFG); + /* Look for supported direct sizes */ for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { struct mmu_psize_def *def = &mmu_psize_defs[psize]; @@ -505,10 +541,26 @@ static void __early_init_mmu(int boot_cpu) */ linear_map_top = memblock_end_of_DRAM(); +#ifdef CONFIG_PPC_FSL_BOOK3E + if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { + unsigned int num_cams; + + /* use a quarter of the TLBCAM for bolted linear map */ + num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4; + linear_map_top = map_mem_in_cams(linear_map_top, num_cams); + + /* limit memory so we dont have linear faults */ + memblock_enforce_memory_limit(linear_map_top); + memblock_analyze(); + } +#endif + /* A sync won't hurt us after mucking around with * the MMU configuration */ mb(); + + memblock_set_current_limit(linear_map_top); } void __init early_init_mmu(void) @@ -521,4 +573,18 @@ void __cpuinit early_init_mmu_secondary(void) __early_init_mmu(0); } +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* On Embedded 64-bit, we adjust the RMA size to match + * the bolted TLB entry. We know for now that only 1G + * entries are supported though that may eventually + * change. We crop it to the size of the first MEMBLOCK to + * avoid going over total available memory just in case... + */ + ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000); + + /* Finally limit subsequent allocations */ + memblock_set_current_limit(ppc64_memblock_base + ppc64_rma_size); +} #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index b9d9fed8f36e..af405eefe48d 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -367,7 +367,7 @@ _GLOBAL(set_context) #error Unsupported processor type ! #endif -#if defined(CONFIG_FSL_BOOKE) +#if defined(CONFIG_PPC_FSL_BOOK3E) /* * extern void loadcam_entry(unsigned int index) * diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index e219ca43962d..73456c4cec28 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -1,8 +1,6 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror -ifeq ($(CONFIG_PPC64),y) -EXTRA_CFLAGS += -mno-minimal-toc -endif +ccflags-$(CONFIG_PPC64) := -mno-minimal-toc obj-$(CONFIG_OPROFILE) += oprofile.o diff --git a/arch/powerpc/oprofile/backtrace.c b/arch/powerpc/oprofile/backtrace.c index b4278cfd1f80..f75301f2c85f 100644 --- a/arch/powerpc/oprofile/backtrace.c +++ b/arch/powerpc/oprofile/backtrace.c @@ -105,7 +105,7 @@ void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth) } } else { #ifdef CONFIG_PPC64 - if (!test_thread_flag(TIF_32BIT)) { + if (!is_32bit_task()) { while (depth--) { sp = user_getsp64(sp, first_frame); if (!sp) diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c index 62312abffa28..d4e6507277b5 100644 --- a/arch/powerpc/oprofile/op_model_fsl_emb.c +++ b/arch/powerpc/oprofile/op_model_fsl_emb.c @@ -2,7 +2,7 @@ * Freescale Embedded oprofile support, based on ppc64 oprofile support * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM * - * Copyright (c) 2004 Freescale Semiconductor, Inc + * Copyright (c) 2004, 2010 Freescale Semiconductor, Inc * * Author: Andy Fleming * Maintainer: Kumar Gala <galak@kernel.crashing.org> @@ -321,9 +321,6 @@ static void fsl_emb_handle_interrupt(struct pt_regs *regs, int val; int i; - /* set the PMM bit (see comment below) */ - mtmsr(mfmsr() | MSR_PMM); - pc = regs->nip; is_kernel = is_kernel_addr(pc); @@ -340,9 +337,13 @@ static void fsl_emb_handle_interrupt(struct pt_regs *regs, } /* The freeze bit was set by the interrupt. */ - /* Clear the freeze bit, and reenable the interrupt. - * The counters won't actually start until the rfi clears - * the PMM bit */ + /* Clear the freeze bit, and reenable the interrupt. The + * counters won't actually start until the rfi clears the PMM + * bit. The PMM bit should not be set until after the interrupt + * is cleared to avoid it getting lost in some hypervisor + * environments. + */ + mtmsr(mfmsr() | MSR_PMM); pmc_start_ctrs(1); } diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 69d668c072ae..0f979c5c756b 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -17,6 +17,16 @@ config BAMBOO help This option enables support for the IBM PPC440EP evaluation board. +config BLUESTONE + bool "Bluestone" + depends on 44x + default n + select PPC44x_SIMPLE + select APM821xx + select IBM_NEW_EMAC_RGMII + help + This option enables support for the APM APM821xx Evaluation board. + config EBONY bool "Ebony" depends on 44x @@ -293,6 +303,12 @@ config 460SX select IBM_NEW_EMAC_ZMII select IBM_NEW_EMAC_TAH +config APM821xx + bool + select PPC_FPU + select IBM_NEW_EMAC_EMAC4 + select IBM_NEW_EMAC_TAH + # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 bool diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c index 5f7a29d7f590..7ddcba3b9397 100644 --- a/arch/powerpc/platforms/44x/ppc44x_simple.c +++ b/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -52,6 +52,7 @@ machine_device_initcall(ppc44x_simple, ppc44x_device_probe); static char *board[] __initdata = { "amcc,arches", "amcc,bamboo", + "amcc,bluestone", "amcc,canyonlands", "amcc,glacier", "ibm,ebony", diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 021763a32c2f..73f4135f3a1a 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -10,12 +10,12 @@ menuconfig PPC_83xx if PPC_83xx config MPC830x_RDB - bool "Freescale MPC830x RDB" + bool "Freescale MPC830x RDB and derivatives" select DEFAULT_UIMAGE select PPC_MPC831x select FSL_GTM help - This option enables support for the MPC8308 RDB board. + This option enables support for the MPC8308 RDB and MPC8308 P1M boards. config MPC831x_RDB bool "Freescale MPC831x RDB" diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c index ac102ee9abe8..846831d495b5 100644 --- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c @@ -65,7 +65,8 @@ static int __init mpc830x_rdb_probe(void) unsigned long root = of_get_flat_dt_root(); return of_flat_dt_is_compatible(root, "MPC8308RDB") || - of_flat_dt_is_compatible(root, "fsl,mpc8308rdb"); + of_flat_dt_is_compatible(root, "fsl,mpc8308rdb") || + of_flat_dt_is_compatible(root, "denx,mpc8308_p1m"); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index bea1f5905ad4..b6976e1726e4 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -11,6 +11,8 @@ menuconfig FSL_SOC_BOOKE if FSL_SOC_BOOKE +if PPC32 + config MPC8540_ADS bool "Freescale MPC8540 ADS" select DEFAULT_UIMAGE @@ -153,10 +155,20 @@ config SBC8560 help This option enables support for the Wind River SBC8560 board +config P3041_DS + bool "Freescale P3041 DS" + select DEFAULT_UIMAGE + select PPC_E500MC + select PHYS_64BIT + select SWIOTLB + select MPC8xxx_GPIO + select HAS_RAPIDIO + help + This option enables support for the P3041 DS board + config P4080_DS bool "Freescale P4080 DS" select DEFAULT_UIMAGE - select PPC_FSL_BOOK3E select PPC_E500MC select PHYS_64BIT select SWIOTLB @@ -165,6 +177,20 @@ config P4080_DS help This option enables support for the P4080 DS board +endif # PPC32 + +config P5020_DS + bool "Freescale P5020 DS" + select DEFAULT_UIMAGE + select E500 + select PPC_E500MC + select PHYS_64BIT + select SWIOTLB + select MPC8xxx_GPIO + select HAS_RAPIDIO + help + This option enables support for the P5020 DS board + endif # FSL_SOC_BOOKE config TQM85xx diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index a2ec3f8f4d06..dd70db77d63e 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -11,7 +11,9 @@ obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o +obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o +obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8560) += sbc8560.o diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 34e00902ce86..2b390d19a1d1 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -112,6 +112,8 @@ static struct of_device_id __initdata p1022_ds_ids[] = { { .compatible = "soc", }, { .compatible = "simple-bus", }, { .compatible = "gianfar", }, + /* So that the DMA channel nodes can be probed individually: */ + { .compatible = "fsl,eloplus-dma", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/p3041_ds.c b/arch/powerpc/platforms/85xx/p3041_ds.c new file mode 100644 index 000000000000..0ed52e18298c --- /dev/null +++ b/arch/powerpc/platforms/85xx/p3041_ds.c @@ -0,0 +1,64 @@ +/* + * P3041 DS Setup + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2009-2010 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/phy.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <linux/of_platform.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "corenet_ds.h" + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p3041_ds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P3041DS"); +} + +define_machine(p3041_ds) { + .name = "P3041 DS", + .probe = p3041_ds_probe, + .setup_arch = corenet_ds_setup_arch, + .init_IRQ = corenet_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_coreint_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +machine_device_initcall(p3041_ds, corenet_ds_publish_devices); + +#ifdef CONFIG_SWIOTLB +machine_arch_initcall(p3041_ds, swiotlb_setup_bus_notifier); +#endif diff --git a/arch/powerpc/platforms/85xx/p5020_ds.c b/arch/powerpc/platforms/85xx/p5020_ds.c new file mode 100644 index 000000000000..7467b712ee00 --- /dev/null +++ b/arch/powerpc/platforms/85xx/p5020_ds.c @@ -0,0 +1,69 @@ +/* + * P5020 DS Setup + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2009-2010 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/phy.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <linux/of_platform.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "corenet_ds.h" + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p5020_ds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P5020DS"); +} + +define_machine(p5020_ds) { + .name = "P5020 DS", + .probe = p5020_ds_probe, + .setup_arch = corenet_ds_setup_arch, + .init_IRQ = corenet_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +/* coreint doesn't play nice with lazy EE, use legacy mpic for now */ +#ifdef CONFIG_PPC64 + .get_irq = mpic_get_irq, +#else + .get_irq = mpic_get_coreint_irq, +#endif + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +machine_device_initcall(p5020_ds, corenet_ds_publish_devices); + +#ifdef CONFIG_SWIOTLB +machine_arch_initcall(p5020_ds, swiotlb_setup_bus_notifier); +#endif diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index a6b106557be4..5c91a992f02b 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -16,6 +16,7 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/kexec.h> +#include <linux/highmem.h> #include <asm/machdep.h> #include <asm/pgtable.h> @@ -79,6 +80,7 @@ smp_85xx_kick_cpu(int nr) local_irq_save(flags); out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr); +#ifdef CONFIG_PPC32 out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start)); if (!ioremappable) @@ -88,6 +90,12 @@ smp_85xx_kick_cpu(int nr) /* Wait a bit for the CPU to ack. */ while ((__secondary_hold_acknowledge != nr) && (++n < 1000)) mdelay(1); +#else + out_be64((u64 *)(bptr_vaddr + BOOT_ENTRY_ADDR_UPPER), + __pa((u64)*((unsigned long long *) generic_secondary_smp_init))); + + smp_generic_kick_cpu(nr); +#endif local_irq_restore(flags); @@ -114,19 +122,15 @@ struct smp_ops_t smp_85xx_ops = { }; #ifdef CONFIG_KEXEC -static int kexec_down_cpus = 0; +atomic_t kexec_down_cpus = ATOMIC_INIT(0); void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary) { - mpic_teardown_this_cpu(1); - - /* When crashing, this gets called on all CPU's we only - * take down the non-boot cpus */ - if (smp_processor_id() != boot_cpuid) - { - local_irq_disable(); - kexec_down_cpus++; + local_irq_disable(); + if (secondary) { + atomic_inc(&kexec_down_cpus); + /* loop forever */ while (1); } } @@ -137,16 +141,65 @@ static void mpc85xx_smp_kexec_down(void *arg) ppc_md.kexec_cpu_down(0,1); } -static void mpc85xx_smp_machine_kexec(struct kimage *image) +static void map_and_flush(unsigned long paddr) { - int timeout = 2000; + struct page *page = pfn_to_page(paddr >> PAGE_SHIFT); + unsigned long kaddr = (unsigned long)kmap(page); + + flush_dcache_range(kaddr, kaddr + PAGE_SIZE); + kunmap(page); +} + +/** + * Before we reset the other cores, we need to flush relevant cache + * out to memory so we don't get anything corrupted, some of these flushes + * are performed out of an overabundance of caution as interrupts are not + * disabled yet and we can switch cores + */ +static void mpc85xx_smp_flush_dcache_kexec(struct kimage *image) +{ + kimage_entry_t *ptr, entry; + unsigned long paddr; int i; - set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); + if (image->type == KEXEC_TYPE_DEFAULT) { + /* normal kexec images are stored in temporary pages */ + for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE); + ptr = (entry & IND_INDIRECTION) ? + phys_to_virt(entry & PAGE_MASK) : ptr + 1) { + if (!(entry & IND_DESTINATION)) { + map_and_flush(entry); + } + } + /* flush out last IND_DONE page */ + map_and_flush(entry); + } else { + /* crash type kexec images are copied to the crash region */ + for (i = 0; i < image->nr_segments; i++) { + struct kexec_segment *seg = &image->segment[i]; + for (paddr = seg->mem; paddr < seg->mem + seg->memsz; + paddr += PAGE_SIZE) { + map_and_flush(paddr); + } + } + } + + /* also flush the kimage struct to be passed in as well */ + flush_dcache_range((unsigned long)image, + (unsigned long)image + sizeof(*image)); +} + +static void mpc85xx_smp_machine_kexec(struct kimage *image) +{ + int timeout = INT_MAX; + int i, num_cpus = num_present_cpus(); + + mpc85xx_smp_flush_dcache_kexec(image); - smp_call_function(mpc85xx_smp_kexec_down, NULL, 0); + if (image->type == KEXEC_TYPE_DEFAULT) + smp_call_function(mpc85xx_smp_kexec_down, NULL, 0); - while ( (kexec_down_cpus != (num_online_cpus() - 1)) && + while ( (atomic_read(&kexec_down_cpus) != (num_cpus - 1)) && ( timeout > 0 ) ) { timeout--; @@ -155,7 +208,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image) if ( !timeout ) printk(KERN_ERR "Unable to bring down secondary cpu(s)"); - for (i = 0; i < num_present_cpus(); i++) + for (i = 0; i < num_cpus; i++) { if ( i == smp_processor_id() ) continue; mpic_reset_core(i); diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index d361f8119b1e..111138c55f9c 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -125,6 +125,7 @@ config 8xx config E500 select FSL_EMB_PERFMON + select PPC_FSL_BOOK3E bool config PPC_E500MC @@ -166,9 +167,14 @@ config BOOKE config FSL_BOOKE bool - depends on E200 || E500 + depends on (E200 || E500) && PPC32 default y +# this is for common code between PPC32 & PPC64 FSL BOOKE +config PPC_FSL_BOOK3E + bool + select FSL_EMB_PERFMON + default y if FSL_BOOKE config PTE_64BIT bool diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 1d3c4effea10..5ec1e47a0d77 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -173,8 +173,10 @@ static int __init cbe_ptcal_enable(void) return -ENODEV; size = of_get_property(np, "ibm,cbe-ptcal-size", NULL); - if (!size) + if (!size) { + of_node_put(np); return -ENODEV; + } pr_debug("%s: enabling PTCAL, size = 0x%x\n", __func__, *size); order = get_order(*size); diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index 5876e888e412..3f2e557344a3 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -258,8 +258,10 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic) return NO_IRQ; imap += intsize + 1; tmp = of_get_property(iic, "#interrupt-cells", NULL); - if (tmp == NULL) + if (tmp == NULL) { + of_node_put(iic); return NO_IRQ; + } intsize = *tmp; /* Assume unit is last entry of interrupt specifier */ unit = imap[intsize - 1]; diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 1a40da92154c..02f7b113a31b 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -154,6 +154,7 @@ static const struct file_operations __fops = { \ .release = spufs_attr_release, \ .read = spufs_attr_read, \ .write = spufs_attr_write, \ + .llseek = generic_file_llseek, \ }; @@ -521,6 +522,7 @@ static const struct file_operations spufs_cntl_fops = { .release = spufs_cntl_release, .read = simple_attr_read, .write = simple_attr_write, + .llseek = generic_file_llseek, .mmap = spufs_cntl_mmap, }; @@ -714,6 +716,7 @@ static ssize_t spufs_mbox_read(struct file *file, char __user *buf, static const struct file_operations spufs_mbox_fops = { .open = spufs_pipe_open, .read = spufs_mbox_read, + .llseek = no_llseek, }; static ssize_t spufs_mbox_stat_read(struct file *file, char __user *buf, @@ -743,6 +746,7 @@ static ssize_t spufs_mbox_stat_read(struct file *file, char __user *buf, static const struct file_operations spufs_mbox_stat_fops = { .open = spufs_pipe_open, .read = spufs_mbox_stat_read, + .llseek = no_llseek, }; /* low-level ibox access function */ @@ -863,6 +867,7 @@ static const struct file_operations spufs_ibox_fops = { .read = spufs_ibox_read, .poll = spufs_ibox_poll, .fasync = spufs_ibox_fasync, + .llseek = no_llseek, }; static ssize_t spufs_ibox_stat_read(struct file *file, char __user *buf, @@ -890,6 +895,7 @@ static ssize_t spufs_ibox_stat_read(struct file *file, char __user *buf, static const struct file_operations spufs_ibox_stat_fops = { .open = spufs_pipe_open, .read = spufs_ibox_stat_read, + .llseek = no_llseek, }; /* low-level mailbox write */ @@ -1011,6 +1017,7 @@ static const struct file_operations spufs_wbox_fops = { .write = spufs_wbox_write, .poll = spufs_wbox_poll, .fasync = spufs_wbox_fasync, + .llseek = no_llseek, }; static ssize_t spufs_wbox_stat_read(struct file *file, char __user *buf, @@ -1038,6 +1045,7 @@ static ssize_t spufs_wbox_stat_read(struct file *file, char __user *buf, static const struct file_operations spufs_wbox_stat_fops = { .open = spufs_pipe_open, .read = spufs_wbox_stat_read, + .llseek = no_llseek, }; static int spufs_signal1_open(struct inode *inode, struct file *file) @@ -1166,6 +1174,7 @@ static const struct file_operations spufs_signal1_fops = { .read = spufs_signal1_read, .write = spufs_signal1_write, .mmap = spufs_signal1_mmap, + .llseek = no_llseek, }; static const struct file_operations spufs_signal1_nosched_fops = { @@ -1173,6 +1182,7 @@ static const struct file_operations spufs_signal1_nosched_fops = { .release = spufs_signal1_release, .write = spufs_signal1_write, .mmap = spufs_signal1_mmap, + .llseek = no_llseek, }; static int spufs_signal2_open(struct inode *inode, struct file *file) @@ -1305,6 +1315,7 @@ static const struct file_operations spufs_signal2_fops = { .read = spufs_signal2_read, .write = spufs_signal2_write, .mmap = spufs_signal2_mmap, + .llseek = no_llseek, }; static const struct file_operations spufs_signal2_nosched_fops = { @@ -1312,6 +1323,7 @@ static const struct file_operations spufs_signal2_nosched_fops = { .release = spufs_signal2_release, .write = spufs_signal2_write, .mmap = spufs_signal2_mmap, + .llseek = no_llseek, }; /* @@ -1451,6 +1463,7 @@ static const struct file_operations spufs_mss_fops = { .open = spufs_mss_open, .release = spufs_mss_release, .mmap = spufs_mss_mmap, + .llseek = no_llseek, }; static int @@ -1508,6 +1521,7 @@ static const struct file_operations spufs_psmap_fops = { .open = spufs_psmap_open, .release = spufs_psmap_release, .mmap = spufs_psmap_mmap, + .llseek = no_llseek, }; @@ -1871,6 +1885,7 @@ static const struct file_operations spufs_mfc_fops = { .fsync = spufs_mfc_fsync, .fasync = spufs_mfc_fasync, .mmap = spufs_mfc_mmap, + .llseek = no_llseek, }; static int spufs_npc_set(void *data, u64 val) @@ -2246,6 +2261,7 @@ static ssize_t spufs_dma_info_read(struct file *file, char __user *buf, static const struct file_operations spufs_dma_info_fops = { .open = spufs_info_open, .read = spufs_dma_info_read, + .llseek = no_llseek, }; static ssize_t __spufs_proxydma_info_read(struct spu_context *ctx, @@ -2299,6 +2315,7 @@ static ssize_t spufs_proxydma_info_read(struct file *file, char __user *buf, static const struct file_operations spufs_proxydma_info_fops = { .open = spufs_info_open, .read = spufs_proxydma_info_read, + .llseek = no_llseek, }; static int spufs_show_tid(struct seq_file *s, void *private) @@ -2585,6 +2602,7 @@ static const struct file_operations spufs_switch_log_fops = { .read = spufs_switch_log_read, .poll = spufs_switch_log_poll, .release = spufs_switch_log_release, + .llseek = no_llseek, }; /** diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c index ba3588f2d8e0..d3ceff04ffc7 100644 --- a/arch/powerpc/platforms/chrp/nvram.c +++ b/arch/powerpc/platforms/chrp/nvram.c @@ -74,8 +74,10 @@ void __init chrp_nvram_init(void) return; nbytes_p = of_get_property(nvram, "#bytes", &proplen); - if (nbytes_p == NULL || proplen != sizeof(unsigned int)) + if (nbytes_p == NULL || proplen != sizeof(unsigned int)) { + of_node_put(nvram); return; + } nvram_size = *nbytes_p; diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c index 5cdcc7c8d973..649473a729b8 100644 --- a/arch/powerpc/platforms/embedded6xx/wii.c +++ b/arch/powerpc/platforms/embedded6xx/wii.c @@ -65,7 +65,7 @@ static int __init page_aligned(unsigned long x) void __init wii_memory_fixups(void) { - struct memblock_property *p = memblock.memory.region; + struct memblock_region *p = memblock.memory.regions; /* * This is part of a workaround to allow the use of two diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile index ce014928d460..a7602b11ed9d 100644 --- a/arch/powerpc/platforms/iseries/Makefile +++ b/arch/powerpc/platforms/iseries/Makefile @@ -1,4 +1,4 @@ -EXTRA_CFLAGS += -mno-minimal-toc +ccflags-y := -mno-minimal-toc obj-y += exception.o obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt.o mf.o lpevents.o \ diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c index 7f45a51fe793..fdb7384c0c4f 100644 --- a/arch/powerpc/platforms/iseries/dt.c +++ b/arch/powerpc/platforms/iseries/dt.c @@ -243,7 +243,7 @@ static void __init dt_cpus(struct iseries_flat_dt *dt) pft_size[1] = __ilog2(HvCallHpt_getHptPages() * HW_PAGE_SIZE); for (i = 0; i < NR_CPUS; i++) { - if (lppaca[i].dyn_proc_status >= 2) + if (lppaca_of(i).dyn_proc_status >= 2) continue; snprintf(p, 32 - (p - buf), "@%d", i); @@ -251,7 +251,7 @@ static void __init dt_cpus(struct iseries_flat_dt *dt) dt_prop_str(dt, "device_type", device_type_cpu); - index = lppaca[i].dyn_hv_phys_proc_index; + index = lppaca_of(i).dyn_hv_phys_proc_index; d = &xIoHriProcessorVpd[index]; dt_prop_u32(dt, "i-cache-size", d->xInstCacheSize * 1024); diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c index 6590850045af..6c6029914dbc 100644 --- a/arch/powerpc/platforms/iseries/smp.c +++ b/arch/powerpc/platforms/iseries/smp.c @@ -91,7 +91,7 @@ static void smp_iSeries_kick_cpu(int nr) BUG_ON((nr < 0) || (nr >= NR_CPUS)); /* Verify that our partition has a processor nr */ - if (lppaca[nr].dyn_proc_status >= 2) + if (lppaca_of(nr).dyn_proc_status >= 2) return; /* The processor is currently spinning, waiting diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 3fff8d979b41..fe34c3d9bb74 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -358,6 +358,7 @@ static int __init maple_cpc925_edac_setup(void) model = (const unsigned char *)of_get_property(np, "model", NULL); if (!model) { printk(KERN_ERR "%s: Unabel to get model info\n", __func__); + of_node_put(np); return -ENODEV; } diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c index cec635942657..b0c3777528a1 100644 --- a/arch/powerpc/platforms/powermac/pfunc_core.c +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -837,8 +837,10 @@ struct pmf_function *__pmf_find_function(struct device_node *target, return NULL; find_it: dev = pmf_find_device(actor); - if (dev == NULL) - return NULL; + if (dev == NULL) { + result = NULL; + goto out; + } list_for_each_entry(func, &dev->functions, link) { if (name && strcmp(name, func->name)) @@ -850,8 +852,9 @@ struct pmf_function *__pmf_find_function(struct device_node *target, result = func; break; } - of_node_put(actor); pmf_put_device(dev); +out: + of_node_put(actor); return result; } diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 046ace9c4381..59eb8bdaa79d 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,14 +1,9 @@ -ifeq ($(CONFIG_PPC64),y) -EXTRA_CFLAGS += -mno-minimal-toc -endif - -ifeq ($(CONFIG_PPC_PSERIES_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_PPC64) := -mno-minimal-toc +ccflags-$(CONFIG_PPC_PSERIES_DEBUG) += -DDEBUG obj-y := lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o event_sources.o ras.o \ - firmware.o power.o dlpar.o + firmware.o power.o dlpar.o mobility.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o @@ -23,7 +18,7 @@ obj-$(CONFIG_MEMORY_HOTPLUG) += hotplug-memory.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_HVCS) += hvcserver.o obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o -obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o +obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o obj-$(CONFIG_CMM) += cmm.o obj-$(CONFIG_DTL) += dtl.o diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index 72d8054fa739..b74a9230edc9 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -33,7 +33,7 @@ struct cc_workarea { u32 prop_offset; }; -static void dlpar_free_cc_property(struct property *prop) +void dlpar_free_cc_property(struct property *prop) { kfree(prop->name); kfree(prop->value); @@ -55,13 +55,12 @@ static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa) prop->length = ccwa->prop_length; value = (char *)ccwa + ccwa->prop_offset; - prop->value = kzalloc(prop->length, GFP_KERNEL); + prop->value = kmemdup(value, prop->length, GFP_KERNEL); if (!prop->value) { dlpar_free_cc_property(prop); return NULL; } - memcpy(prop->value, value, prop->length); return prop; } @@ -102,7 +101,7 @@ static void dlpar_free_one_cc_node(struct device_node *dn) kfree(dn); } -static void dlpar_free_cc_nodes(struct device_node *dn) +void dlpar_free_cc_nodes(struct device_node *dn) { if (dn->child) dlpar_free_cc_nodes(dn->child); diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index a00addb55945..c371bc06434b 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -23,37 +23,22 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/debugfs.h> +#include <linux/spinlock.h> #include <asm/smp.h> #include <asm/system.h> #include <asm/uaccess.h> #include <asm/firmware.h> +#include <asm/lppaca.h> #include "plpar_wrappers.h" -/* - * Layout of entries in the hypervisor's DTL buffer. Although we don't - * actually access the internals of an entry (we only need to know the size), - * we might as well define it here for reference. - */ -struct dtl_entry { - u8 dispatch_reason; - u8 preempt_reason; - u16 processor_id; - u32 enqueue_to_dispatch_time; - u32 ready_to_enqueue_time; - u32 waiting_to_ready_time; - u64 timebase; - u64 fault_addr; - u64 srr0; - u64 srr1; -}; - struct dtl { struct dtl_entry *buf; struct dentry *file; int cpu; int buf_entries; u64 last_idx; + spinlock_t lock; }; static DEFINE_PER_CPU(struct dtl, cpu_dtl); @@ -72,25 +57,97 @@ static u8 dtl_event_mask = 0x7; static int dtl_buf_entries = (16 * 85); -static int dtl_enable(struct dtl *dtl) +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +struct dtl_ring { + u64 write_index; + struct dtl_entry *write_ptr; + struct dtl_entry *buf; + struct dtl_entry *buf_end; + u8 saved_dtl_mask; +}; + +static DEFINE_PER_CPU(struct dtl_ring, dtl_rings); + +static atomic_t dtl_count; + +/* + * The cpu accounting code controls the DTL ring buffer, and we get + * given entries as they are processed. + */ +static void consume_dtle(struct dtl_entry *dtle, u64 index) { - unsigned long addr; - int ret, hwcpu; + struct dtl_ring *dtlr = &__get_cpu_var(dtl_rings); + struct dtl_entry *wp = dtlr->write_ptr; + struct lppaca *vpa = local_paca->lppaca_ptr; - /* only allow one reader */ - if (dtl->buf) - return -EBUSY; + if (!wp) + return; - /* we need to store the original allocation size for use during read */ - dtl->buf_entries = dtl_buf_entries; + *wp = *dtle; + barrier(); - dtl->buf = kmalloc_node(dtl->buf_entries * sizeof(struct dtl_entry), - GFP_KERNEL, cpu_to_node(dtl->cpu)); - if (!dtl->buf) { - printk(KERN_WARNING "%s: buffer alloc failed for cpu %d\n", - __func__, dtl->cpu); - return -ENOMEM; - } + /* check for hypervisor ring buffer overflow, ignore this entry if so */ + if (index + N_DISPATCH_LOG < vpa->dtl_idx) + return; + + ++wp; + if (wp == dtlr->buf_end) + wp = dtlr->buf; + dtlr->write_ptr = wp; + + /* incrementing write_index makes the new entry visible */ + smp_wmb(); + ++dtlr->write_index; +} + +static int dtl_start(struct dtl *dtl) +{ + struct dtl_ring *dtlr = &per_cpu(dtl_rings, dtl->cpu); + + dtlr->buf = dtl->buf; + dtlr->buf_end = dtl->buf + dtl->buf_entries; + dtlr->write_index = 0; + + /* setting write_ptr enables logging into our buffer */ + smp_wmb(); + dtlr->write_ptr = dtl->buf; + + /* enable event logging */ + dtlr->saved_dtl_mask = lppaca_of(dtl->cpu).dtl_enable_mask; + lppaca_of(dtl->cpu).dtl_enable_mask |= dtl_event_mask; + + dtl_consumer = consume_dtle; + atomic_inc(&dtl_count); + return 0; +} + +static void dtl_stop(struct dtl *dtl) +{ + struct dtl_ring *dtlr = &per_cpu(dtl_rings, dtl->cpu); + + dtlr->write_ptr = NULL; + smp_wmb(); + + dtlr->buf = NULL; + + /* restore dtl_enable_mask */ + lppaca_of(dtl->cpu).dtl_enable_mask = dtlr->saved_dtl_mask; + + if (atomic_dec_and_test(&dtl_count)) + dtl_consumer = NULL; +} + +static u64 dtl_current_index(struct dtl *dtl) +{ + return per_cpu(dtl_rings, dtl->cpu).write_index; +} + +#else /* CONFIG_VIRT_CPU_ACCOUNTING */ + +static int dtl_start(struct dtl *dtl) +{ + unsigned long addr; + int ret, hwcpu; /* Register our dtl buffer with the hypervisor. The HV expects the * buffer size to be passed in the second word of the buffer */ @@ -102,34 +159,82 @@ static int dtl_enable(struct dtl *dtl) if (ret) { printk(KERN_WARNING "%s: DTL registration for cpu %d (hw %d) " "failed with %d\n", __func__, dtl->cpu, hwcpu, ret); - kfree(dtl->buf); return -EIO; } /* set our initial buffer indices */ - dtl->last_idx = lppaca[dtl->cpu].dtl_idx = 0; + lppaca_of(dtl->cpu).dtl_idx = 0; /* ensure that our updates to the lppaca fields have occurred before * we actually enable the logging */ smp_wmb(); /* enable event logging */ - lppaca[dtl->cpu].dtl_enable_mask = dtl_event_mask; + lppaca_of(dtl->cpu).dtl_enable_mask = dtl_event_mask; return 0; } -static void dtl_disable(struct dtl *dtl) +static void dtl_stop(struct dtl *dtl) { int hwcpu = get_hard_smp_processor_id(dtl->cpu); - lppaca[dtl->cpu].dtl_enable_mask = 0x0; + lppaca_of(dtl->cpu).dtl_enable_mask = 0x0; unregister_dtl(hwcpu, __pa(dtl->buf)); +} + +static u64 dtl_current_index(struct dtl *dtl) +{ + return lppaca_of(dtl->cpu).dtl_idx; +} +#endif /* CONFIG_VIRT_CPU_ACCOUNTING */ + +static int dtl_enable(struct dtl *dtl) +{ + long int n_entries; + long int rc; + struct dtl_entry *buf = NULL; + /* only allow one reader */ + if (dtl->buf) + return -EBUSY; + + n_entries = dtl_buf_entries; + buf = kmalloc_node(n_entries * sizeof(struct dtl_entry), + GFP_KERNEL, cpu_to_node(dtl->cpu)); + if (!buf) { + printk(KERN_WARNING "%s: buffer alloc failed for cpu %d\n", + __func__, dtl->cpu); + return -ENOMEM; + } + + spin_lock(&dtl->lock); + rc = -EBUSY; + if (!dtl->buf) { + /* store the original allocation size for use during read */ + dtl->buf_entries = n_entries; + dtl->buf = buf; + dtl->last_idx = 0; + rc = dtl_start(dtl); + if (rc) + dtl->buf = NULL; + } + spin_unlock(&dtl->lock); + + if (rc) + kfree(buf); + return rc; +} + +static void dtl_disable(struct dtl *dtl) +{ + spin_lock(&dtl->lock); + dtl_stop(dtl); kfree(dtl->buf); dtl->buf = NULL; dtl->buf_entries = 0; + spin_unlock(&dtl->lock); } /* file interface */ @@ -157,8 +262,9 @@ static int dtl_file_release(struct inode *inode, struct file *filp) static ssize_t dtl_file_read(struct file *filp, char __user *buf, size_t len, loff_t *pos) { - int rc, cur_idx, last_idx, n_read, n_req, read_size; + long int rc, n_read, n_req, read_size; struct dtl *dtl; + u64 cur_idx, last_idx, i; if ((len % sizeof(struct dtl_entry)) != 0) return -EINVAL; @@ -171,41 +277,48 @@ static ssize_t dtl_file_read(struct file *filp, char __user *buf, size_t len, /* actual number of entries read */ n_read = 0; - cur_idx = lppaca[dtl->cpu].dtl_idx; + spin_lock(&dtl->lock); + + cur_idx = dtl_current_index(dtl); last_idx = dtl->last_idx; - if (cur_idx - last_idx > dtl->buf_entries) { - pr_debug("%s: hv buffer overflow for cpu %d, samples lost\n", - __func__, dtl->cpu); - } + if (last_idx + dtl->buf_entries <= cur_idx) + last_idx = cur_idx - dtl->buf_entries + 1; + + if (last_idx + n_req > cur_idx) + n_req = cur_idx - last_idx; + + if (n_req > 0) + dtl->last_idx = last_idx + n_req; + + spin_unlock(&dtl->lock); + + if (n_req <= 0) + return 0; - cur_idx %= dtl->buf_entries; - last_idx %= dtl->buf_entries; + i = last_idx % dtl->buf_entries; /* read the tail of the buffer if we've wrapped */ - if (last_idx > cur_idx) { - read_size = min(n_req, dtl->buf_entries - last_idx); + if (i + n_req > dtl->buf_entries) { + read_size = dtl->buf_entries - i; - rc = copy_to_user(buf, &dtl->buf[last_idx], + rc = copy_to_user(buf, &dtl->buf[i], read_size * sizeof(struct dtl_entry)); if (rc) return -EFAULT; - last_idx = 0; + i = 0; n_req -= read_size; n_read += read_size; buf += read_size * sizeof(struct dtl_entry); } /* .. and now the head */ - read_size = min(n_req, cur_idx - last_idx); - rc = copy_to_user(buf, &dtl->buf[last_idx], - read_size * sizeof(struct dtl_entry)); + rc = copy_to_user(buf, &dtl->buf[i], n_req * sizeof(struct dtl_entry)); if (rc) return -EFAULT; - n_read += read_size; - dtl->last_idx += n_read; + n_read += n_req; return n_read * sizeof(struct dtl_entry); } @@ -263,6 +376,7 @@ static int dtl_init(void) /* set up the per-cpu log structures */ for_each_possible_cpu(i) { struct dtl *dtl = &per_cpu(cpu_dtl, i); + spin_lock_init(&dtl->lock); dtl->cpu = i; rc = dtl_setup_file(dtl); diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index cf79b46d8f88..f129040d974c 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -248,11 +248,13 @@ void vpa_init(int cpu) int hwcpu = get_hard_smp_processor_id(cpu); unsigned long addr; long ret; + struct paca_struct *pp; + struct dtl_entry *dtl; if (cpu_has_feature(CPU_FTR_ALTIVEC)) - lppaca[cpu].vmxregs_in_use = 1; + lppaca_of(cpu).vmxregs_in_use = 1; - addr = __pa(&lppaca[cpu]); + addr = __pa(&lppaca_of(cpu)); ret = register_vpa(hwcpu, addr); if (ret) { @@ -274,6 +276,25 @@ void vpa_init(int cpu) "registration for cpu %d (hw %d) of area %lx " "returns %ld\n", cpu, hwcpu, addr, ret); } + + /* + * Register dispatch trace log, if one has been allocated. + */ + pp = &paca[cpu]; + dtl = pp->dispatch_log; + if (dtl) { + pp->dtl_ridx = 0; + pp->dtl_curr = dtl; + lppaca_of(cpu).dtl_idx = 0; + + /* hypervisor reads buffer length from this field */ + dtl->enqueue_to_dispatch_time = DISPATCH_LOG_BYTES; + ret = register_dtl(hwcpu, __pa(dtl)); + if (ret) + pr_warn("DTL registration failed for cpu %d (%ld)\n", + cpu, ret); + lppaca_of(cpu).dtl_enable_mask = 2; + } } static long pSeries_lpar_hpte_insert(unsigned long hpte_group, diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c new file mode 100644 index 000000000000..3e7f651e50ac --- /dev/null +++ b/arch/powerpc/platforms/pseries/mobility.c @@ -0,0 +1,362 @@ +/* + * Support for Partition Mobility/Migration + * + * Copyright (C) 2010 Nathan Fontenot + * Copyright (C) 2010 IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/kobject.h> +#include <linux/smp.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/slab.h> + +#include <asm/rtas.h> +#include "pseries.h" + +static struct kobject *mobility_kobj; + +struct update_props_workarea { + u32 phandle; + u32 state; + u64 reserved; + u32 nprops; +}; + +#define NODE_ACTION_MASK 0xff000000 +#define NODE_COUNT_MASK 0x00ffffff + +#define DELETE_DT_NODE 0x01000000 +#define UPDATE_DT_NODE 0x02000000 +#define ADD_DT_NODE 0x03000000 + +static int mobility_rtas_call(int token, char *buf) +{ + int rc; + + spin_lock(&rtas_data_buf_lock); + + memcpy(rtas_data_buf, buf, RTAS_DATA_BUF_SIZE); + rc = rtas_call(token, 2, 1, NULL, rtas_data_buf, 1); + memcpy(buf, rtas_data_buf, RTAS_DATA_BUF_SIZE); + + spin_unlock(&rtas_data_buf_lock); + return rc; +} + +static int delete_dt_node(u32 phandle) +{ + struct device_node *dn; + + dn = of_find_node_by_phandle(phandle); + if (!dn) + return -ENOENT; + + dlpar_detach_node(dn); + return 0; +} + +static int update_dt_property(struct device_node *dn, struct property **prop, + const char *name, u32 vd, char *value) +{ + struct property *new_prop = *prop; + struct property *old_prop; + int more = 0; + + /* A negative 'vd' value indicates that only part of the new property + * value is contained in the buffer and we need to call + * ibm,update-properties again to get the rest of the value. + * + * A negative value is also the two's compliment of the actual value. + */ + if (vd & 0x80000000) { + vd = ~vd + 1; + more = 1; + } + + if (new_prop) { + /* partial property fixup */ + char *new_data = kzalloc(new_prop->length + vd, GFP_KERNEL); + if (!new_data) + return -ENOMEM; + + memcpy(new_data, new_prop->value, new_prop->length); + memcpy(new_data + new_prop->length, value, vd); + + kfree(new_prop->value); + new_prop->value = new_data; + new_prop->length += vd; + } else { + new_prop = kzalloc(sizeof(*new_prop), GFP_KERNEL); + if (!new_prop) + return -ENOMEM; + + new_prop->name = kstrdup(name, GFP_KERNEL); + if (!new_prop->name) { + kfree(new_prop); + return -ENOMEM; + } + + new_prop->length = vd; + new_prop->value = kzalloc(new_prop->length, GFP_KERNEL); + if (!new_prop->value) { + kfree(new_prop->name); + kfree(new_prop); + return -ENOMEM; + } + + memcpy(new_prop->value, value, vd); + *prop = new_prop; + } + + if (!more) { + old_prop = of_find_property(dn, new_prop->name, NULL); + if (old_prop) + prom_update_property(dn, new_prop, old_prop); + else + prom_add_property(dn, new_prop); + + new_prop = NULL; + } + + return 0; +} + +static int update_dt_node(u32 phandle) +{ + struct update_props_workarea *upwa; + struct device_node *dn; + struct property *prop = NULL; + int i, rc; + char *prop_data; + char *rtas_buf; + int update_properties_token; + + update_properties_token = rtas_token("ibm,update-properties"); + if (update_properties_token == RTAS_UNKNOWN_SERVICE) + return -EINVAL; + + rtas_buf = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); + if (!rtas_buf) + return -ENOMEM; + + dn = of_find_node_by_phandle(phandle); + if (!dn) { + kfree(rtas_buf); + return -ENOENT; + } + + upwa = (struct update_props_workarea *)&rtas_buf[0]; + upwa->phandle = phandle; + + do { + rc = mobility_rtas_call(update_properties_token, rtas_buf); + if (rc < 0) + break; + + prop_data = rtas_buf + sizeof(*upwa); + + for (i = 0; i < upwa->nprops; i++) { + char *prop_name; + u32 vd; + + prop_name = prop_data + 1; + prop_data += strlen(prop_name) + 1; + vd = *prop_data++; + + switch (vd) { + case 0x00000000: + /* name only property, nothing to do */ + break; + + case 0x80000000: + prop = of_find_property(dn, prop_name, NULL); + prom_remove_property(dn, prop); + prop = NULL; + break; + + default: + rc = update_dt_property(dn, &prop, prop_name, + vd, prop_data); + if (rc) { + printk(KERN_ERR "Could not update %s" + " property\n", prop_name); + } + + prop_data += vd; + } + } + } while (rc == 1); + + of_node_put(dn); + kfree(rtas_buf); + return 0; +} + +static int add_dt_node(u32 parent_phandle, u32 drc_index) +{ + struct device_node *dn; + struct device_node *parent_dn; + int rc; + + dn = dlpar_configure_connector(drc_index); + if (!dn) + return -ENOENT; + + parent_dn = of_find_node_by_phandle(parent_phandle); + if (!parent_dn) { + dlpar_free_cc_nodes(dn); + return -ENOENT; + } + + dn->parent = parent_dn; + rc = dlpar_attach_node(dn); + if (rc) + dlpar_free_cc_nodes(dn); + + of_node_put(parent_dn); + return rc; +} + +static int pseries_devicetree_update(void) +{ + char *rtas_buf; + u32 *data; + int update_nodes_token; + int rc; + + update_nodes_token = rtas_token("ibm,update-nodes"); + if (update_nodes_token == RTAS_UNKNOWN_SERVICE) + return -EINVAL; + + rtas_buf = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); + if (!rtas_buf) + return -ENOMEM; + + do { + rc = mobility_rtas_call(update_nodes_token, rtas_buf); + if (rc && rc != 1) + break; + + data = (u32 *)rtas_buf + 4; + while (*data & NODE_ACTION_MASK) { + int i; + u32 action = *data & NODE_ACTION_MASK; + int node_count = *data & NODE_COUNT_MASK; + + data++; + + for (i = 0; i < node_count; i++) { + u32 phandle = *data++; + u32 drc_index; + + switch (action) { + case DELETE_DT_NODE: + delete_dt_node(phandle); + break; + case UPDATE_DT_NODE: + update_dt_node(phandle); + break; + case ADD_DT_NODE: + drc_index = *data++; + add_dt_node(phandle, drc_index); + break; + } + } + } + } while (rc == 1); + + kfree(rtas_buf); + return rc; +} + +void post_mobility_fixup(void) +{ + int rc; + int activate_fw_token; + + rc = pseries_devicetree_update(); + if (rc) { + printk(KERN_ERR "Initial post-mobility device tree update " + "failed: %d\n", rc); + return; + } + + activate_fw_token = rtas_token("ibm,activate-firmware"); + if (activate_fw_token == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ERR "Could not make post-mobility " + "activate-fw call.\n"); + return; + } + + rc = rtas_call(activate_fw_token, 0, 1, NULL); + if (!rc) { + rc = pseries_devicetree_update(); + if (rc) + printk(KERN_ERR "Secondary post-mobility device tree " + "update failed: %d\n", rc); + } else { + printk(KERN_ERR "Post-mobility activate-fw failed: %d\n", rc); + return; + } + + return; +} + +static ssize_t migrate_store(struct class *class, struct class_attribute *attr, + const char *buf, size_t count) +{ + struct rtas_args args; + u64 streamid; + int rc; + + rc = strict_strtoull(buf, 0, &streamid); + if (rc) + return rc; + + memset(&args, 0, sizeof(args)); + args.token = rtas_token("ibm,suspend-me"); + args.nargs = 2; + args.nret = 1; + + args.args[0] = streamid >> 32 ; + args.args[1] = streamid & 0xffffffff; + args.rets = &args.args[args.nargs]; + + do { + args.rets[0] = 0; + rc = rtas_ibm_suspend_me(&args); + if (!rc && args.rets[0] == RTAS_NOT_SUSPENDABLE) + ssleep(1); + } while (!rc && args.rets[0] == RTAS_NOT_SUSPENDABLE); + + if (rc) + return rc; + else if (args.rets[0]) + return args.rets[0]; + + post_mobility_fixup(); + return count; +} + +static CLASS_ATTR(migration, S_IWUSR, NULL, migrate_store); + +static int __init mobility_sysfs_init(void) +{ + int rc; + + mobility_kobj = kobject_create_and_add("mobility", kernel_kobj); + if (!mobility_kobj) + return -ENOMEM; + + rc = sysfs_create_file(mobility_kobj, &class_attr_migration.attr); + + return rc; +} +device_initcall(mobility_sysfs_init); diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 40c93cad91d2..e9f6d2859c3c 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -17,6 +17,8 @@ struct device_node; extern void request_event_sources_irqs(struct device_node *np, irq_handler_t handler, const char *name); +#include <linux/of.h> + extern void __init fw_feature_init(const char *hypertas, unsigned long len); struct pt_regs; @@ -47,4 +49,11 @@ extern unsigned long rtas_poweron_auto; extern void find_udbg_vterm(void); +/* Dynamic logical Partitioning/Mobility */ +extern void dlpar_free_cc_nodes(struct device_node *); +extern void dlpar_free_cc_property(struct property *); +extern struct device_node *dlpar_configure_connector(u32); +extern int dlpar_attach_node(struct device_node *); +extern int dlpar_detach_node(struct device_node *); + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index a6d19e3a505e..d345bfd56bbe 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -273,6 +273,58 @@ static struct notifier_block pci_dn_reconfig_nb = { .notifier_call = pci_dn_reconfig_notifier, }; +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +/* + * Allocate space for the dispatch trace log for all possible cpus + * and register the buffers with the hypervisor. This is used for + * computing time stolen by the hypervisor. + */ +static int alloc_dispatch_logs(void) +{ + int cpu, ret; + struct paca_struct *pp; + struct dtl_entry *dtl; + + if (!firmware_has_feature(FW_FEATURE_SPLPAR)) + return 0; + + for_each_possible_cpu(cpu) { + pp = &paca[cpu]; + dtl = kmalloc_node(DISPATCH_LOG_BYTES, GFP_KERNEL, + cpu_to_node(cpu)); + if (!dtl) { + pr_warn("Failed to allocate dispatch trace log for cpu %d\n", + cpu); + pr_warn("Stolen time statistics will be unreliable\n"); + break; + } + + pp->dtl_ridx = 0; + pp->dispatch_log = dtl; + pp->dispatch_log_end = dtl + N_DISPATCH_LOG; + pp->dtl_curr = dtl; + } + + /* Register the DTL for the current (boot) cpu */ + dtl = get_paca()->dispatch_log; + get_paca()->dtl_ridx = 0; + get_paca()->dtl_curr = dtl; + get_paca()->lppaca_ptr->dtl_idx = 0; + + /* hypervisor reads buffer length from this field */ + dtl->enqueue_to_dispatch_time = DISPATCH_LOG_BYTES; + ret = register_dtl(hard_smp_processor_id(), __pa(dtl)); + if (ret) + pr_warn("DTL registration failed for boot cpu %d (%d)\n", + smp_processor_id(), ret); + get_paca()->lppaca_ptr->dtl_enable_mask = 2; + + return 0; +} + +early_initcall(alloc_dispatch_logs); +#endif /* CONFIG_VIRT_CPU_ACCOUNTING */ + static void __init pSeries_setup_arch(void) { /* Discover PIC type and setup ppc_md accordingly */ diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 67e2c4bdac8f..7b96e5a270ce 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -178,7 +178,7 @@ static int get_irq_server(unsigned int virq, const struct cpumask *cpumask, if (!distribute_irqs) return default_server; - if (!cpumask_equal(cpumask, cpu_all_mask)) { + if (!cpumask_subset(cpu_possible_mask, cpumask)) { int server = cpumask_first_and(cpu_online_mask, cpumask); if (server < nr_cpu_ids) diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 5642924fb9fb..0bef9dacb64e 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -1,8 +1,6 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror -ifeq ($(CONFIG_PPC64),y) -EXTRA_CFLAGS += -mno-minimal-toc -endif +ccflags-$(CONFIG_PPC64) := -mno-minimal-toc mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y) @@ -20,6 +18,7 @@ obj-$(CONFIG_FSL_PMC) += fsl_pmc.o obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o +obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o obj-$(CONFIG_RAPIDIO) += fsl_rio.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index 559db2b846a9..17cf15ec38be 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -70,6 +70,8 @@ static int iommu_table_dart_inited; static int dart_dirty; static int dart_is_u4; +#define DART_U4_BYPASS_BASE 0x8000000000ull + #define DBG(...) static inline void dart_tlb_invalidate_all(void) @@ -292,12 +294,20 @@ static void iommu_table_dart_setup(void) set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map); } -static void pci_dma_dev_setup_dart(struct pci_dev *dev) +static void dma_dev_setup_dart(struct device *dev) { /* We only have one iommu table on the mac for now, which makes * things simple. Setup all PCI devices to point to this table */ - set_iommu_table_base(&dev->dev, &iommu_table_dart); + if (get_dma_ops(dev) == &dma_direct_ops) + set_dma_offset(dev, DART_U4_BYPASS_BASE); + else + set_iommu_table_base(dev, &iommu_table_dart); +} + +static void pci_dma_dev_setup_dart(struct pci_dev *dev) +{ + dma_dev_setup_dart(&dev->dev); } static void pci_dma_bus_setup_dart(struct pci_bus *bus) @@ -315,6 +325,45 @@ static void pci_dma_bus_setup_dart(struct pci_bus *bus) PCI_DN(dn)->iommu_table = &iommu_table_dart; } +static bool dart_device_on_pcie(struct device *dev) +{ + struct device_node *np = of_node_get(dev->of_node); + + while(np) { + if (of_device_is_compatible(np, "U4-pcie") || + of_device_is_compatible(np, "u4-pcie")) { + of_node_put(np); + return true; + } + np = of_get_next_parent(np); + } + return false; +} + +static int dart_dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + + /* U4 supports a DART bypass, we use it for 64-bit capable + * devices to improve performances. However, that only works + * for devices connected to U4 own PCIe interface, not bridged + * through hypertransport. We need the device to support at + * least 40 bits of addresses. + */ + if (dart_device_on_pcie(dev) && dma_mask >= DMA_BIT_MASK(40)) { + dev_info(dev, "Using 64-bit DMA iommu bypass\n"); + set_dma_ops(dev, &dma_direct_ops); + } else { + dev_info(dev, "Using 32-bit DMA via iommu\n"); + set_dma_ops(dev, &dma_iommu_ops); + } + dma_dev_setup_dart(dev); + + *dev->dma_mask = dma_mask; + return 0; +} + void __init iommu_init_early_dart(void) { struct device_node *dn; @@ -328,20 +377,25 @@ void __init iommu_init_early_dart(void) dart_is_u4 = 1; } + /* Initialize the DART HW */ + if (dart_init(dn) != 0) + goto bail; + /* Setup low level TCE operations for the core IOMMU code */ ppc_md.tce_build = dart_build; ppc_md.tce_free = dart_free; ppc_md.tce_flush = dart_flush; - /* Initialize the DART HW */ - if (dart_init(dn) == 0) { - ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_dart; - ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_dart; + /* Setup bypass if supported */ + if (dart_is_u4) + ppc_md.dma_set_mask = dart_dma_set_mask; - /* Setup pci_dma ops */ - set_pci_dma_ops(&dma_iommu_ops); - return; - } + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_dart; + ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_dart; + + /* Setup pci_dma ops */ + set_pci_dma_ops(&dma_iommu_ops); + return; bail: /* If init failed, use direct iommu and null setup functions */ diff --git a/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h b/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h new file mode 100644 index 000000000000..60c9c0bd5ba2 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h @@ -0,0 +1,101 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc + * + * QorIQ based Cache Controller Memory Mapped Registers + * + * Author: Vivek Mahajan <vivek.mahajan@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __FSL_85XX_CACHE_CTLR_H__ +#define __FSL_85XX_CACHE_CTLR_H__ + +#define L2CR_L2FI 0x40000000 /* L2 flash invalidate */ +#define L2CR_L2IO 0x00200000 /* L2 instruction only */ +#define L2CR_SRAM_ZERO 0x00000000 /* L2SRAM zero size */ +#define L2CR_SRAM_FULL 0x00010000 /* L2SRAM full size */ +#define L2CR_SRAM_HALF 0x00020000 /* L2SRAM half size */ +#define L2CR_SRAM_TWO_HALFS 0x00030000 /* L2SRAM two half sizes */ +#define L2CR_SRAM_QUART 0x00040000 /* L2SRAM one quarter size */ +#define L2CR_SRAM_TWO_QUARTS 0x00050000 /* L2SRAM two quarter size */ +#define L2CR_SRAM_EIGHTH 0x00060000 /* L2SRAM one eighth size */ +#define L2CR_SRAM_TWO_EIGHTH 0x00070000 /* L2SRAM two eighth size */ + +#define L2SRAM_OPTIMAL_SZ_SHIFT 0x00000003 /* Optimum size for L2SRAM */ + +#define L2SRAM_BAR_MSK_LO18 0xFFFFC000 /* Lower 18 bits */ +#define L2SRAM_BARE_MSK_HI4 0x0000000F /* Upper 4 bits */ + +enum cache_sram_lock_ways { + LOCK_WAYS_ZERO, + LOCK_WAYS_EIGHTH, + LOCK_WAYS_TWO_EIGHTH, + LOCK_WAYS_HALF = 4, + LOCK_WAYS_FULL = 8, +}; + +struct mpc85xx_l2ctlr { + u32 ctl; /* 0x000 - L2 control */ + u8 res1[0xC]; + u32 ewar0; /* 0x010 - External write address 0 */ + u32 ewarea0; /* 0x014 - External write address extended 0 */ + u32 ewcr0; /* 0x018 - External write ctrl */ + u8 res2[4]; + u32 ewar1; /* 0x020 - External write address 1 */ + u32 ewarea1; /* 0x024 - External write address extended 1 */ + u32 ewcr1; /* 0x028 - External write ctrl 1 */ + u8 res3[4]; + u32 ewar2; /* 0x030 - External write address 2 */ + u32 ewarea2; /* 0x034 - External write address extended 2 */ + u32 ewcr2; /* 0x038 - External write ctrl 2 */ + u8 res4[4]; + u32 ewar3; /* 0x040 - External write address 3 */ + u32 ewarea3; /* 0x044 - External write address extended 3 */ + u32 ewcr3; /* 0x048 - External write ctrl 3 */ + u8 res5[0xB4]; + u32 srbar0; /* 0x100 - SRAM base address 0 */ + u32 srbarea0; /* 0x104 - SRAM base addr reg ext address 0 */ + u32 srbar1; /* 0x108 - SRAM base address 1 */ + u32 srbarea1; /* 0x10C - SRAM base addr reg ext address 1 */ + u8 res6[0xCF0]; + u32 errinjhi; /* 0xE00 - Error injection mask high */ + u32 errinjlo; /* 0xE04 - Error injection mask low */ + u32 errinjctl; /* 0xE08 - Error injection tag/ecc control */ + u8 res7[0x14]; + u32 captdatahi; /* 0xE20 - Error data high capture */ + u32 captdatalo; /* 0xE24 - Error data low capture */ + u32 captecc; /* 0xE28 - Error syndrome */ + u8 res8[0x14]; + u32 errdet; /* 0xE40 - Error detect */ + u32 errdis; /* 0xE44 - Error disable */ + u32 errinten; /* 0xE48 - Error interrupt enable */ + u32 errattr; /* 0xE4c - Error attribute capture */ + u32 erradrrl; /* 0xE50 - Error address capture low */ + u32 erradrrh; /* 0xE54 - Error address capture high */ + u32 errctl; /* 0xE58 - Error control */ + u8 res9[0x1A4]; +}; + +struct sram_parameters { + unsigned int sram_size; + uint64_t sram_offset; +}; + +extern int instantiate_cache_sram(struct platform_device *dev, + struct sram_parameters sram_params); +extern void remove_cache_sram(struct platform_device *dev); + +#endif /* __FSL_85XX_CACHE_CTLR_H__ */ diff --git a/arch/powerpc/sysdev/fsl_85xx_cache_sram.c b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c new file mode 100644 index 000000000000..54fb1922fe30 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c @@ -0,0 +1,159 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * Simple memory allocator abstraction for QorIQ (P1/P2) based Cache-SRAM + * + * Author: Vivek Mahajan <vivek.mahajan@freescale.com> + * + * This file is derived from the original work done + * by Sylvain Munaut for the Bestcomm SRAM allocator. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/of_platform.h> +#include <asm/pgtable.h> +#include <asm/fsl_85xx_cache_sram.h> + +#include "fsl_85xx_cache_ctlr.h" + +struct mpc85xx_cache_sram *cache_sram; + +void *mpc85xx_cache_sram_alloc(unsigned int size, + phys_addr_t *phys, unsigned int align) +{ + unsigned long offset; + unsigned long flags; + + if (unlikely(cache_sram == NULL)) + return NULL; + + if (!size || (size > cache_sram->size) || (align > cache_sram->size)) { + pr_err("%s(): size(=%x) or align(=%x) zero or too big\n", + __func__, size, align); + return NULL; + } + + if ((align & (align - 1)) || align <= 1) { + pr_err("%s(): align(=%x) must be power of two and >1\n", + __func__, align); + return NULL; + } + + spin_lock_irqsave(&cache_sram->lock, flags); + offset = rh_alloc_align(cache_sram->rh, size, align, NULL); + spin_unlock_irqrestore(&cache_sram->lock, flags); + + if (IS_ERR_VALUE(offset)) + return NULL; + + *phys = cache_sram->base_phys + offset; + + return (unsigned char *)cache_sram->base_virt + offset; +} +EXPORT_SYMBOL(mpc85xx_cache_sram_alloc); + +void mpc85xx_cache_sram_free(void *ptr) +{ + unsigned long flags; + BUG_ON(!ptr); + + spin_lock_irqsave(&cache_sram->lock, flags); + rh_free(cache_sram->rh, ptr - cache_sram->base_virt); + spin_unlock_irqrestore(&cache_sram->lock, flags); +} +EXPORT_SYMBOL(mpc85xx_cache_sram_free); + +int __init instantiate_cache_sram(struct platform_device *dev, + struct sram_parameters sram_params) +{ + int ret = 0; + + if (cache_sram) { + dev_err(&dev->dev, "Already initialized cache-sram\n"); + return -EBUSY; + } + + cache_sram = kzalloc(sizeof(struct mpc85xx_cache_sram), GFP_KERNEL); + if (!cache_sram) { + dev_err(&dev->dev, "Out of memory for cache_sram structure\n"); + return -ENOMEM; + } + + cache_sram->base_phys = sram_params.sram_offset; + cache_sram->size = sram_params.sram_size; + + if (!request_mem_region(cache_sram->base_phys, cache_sram->size, + "fsl_85xx_cache_sram")) { + dev_err(&dev->dev, "%s: request memory failed\n", + dev->dev.of_node->full_name); + ret = -ENXIO; + goto out_free; + } + + cache_sram->base_virt = ioremap_flags(cache_sram->base_phys, + cache_sram->size, _PAGE_COHERENT | PAGE_KERNEL); + if (!cache_sram->base_virt) { + dev_err(&dev->dev, "%s: ioremap_flags failed\n", + dev->dev.of_node->full_name); + ret = -ENOMEM; + goto out_release; + } + + cache_sram->rh = rh_create(sizeof(unsigned int)); + if (IS_ERR(cache_sram->rh)) { + dev_err(&dev->dev, "%s: Unable to create remote heap\n", + dev->dev.of_node->full_name); + ret = PTR_ERR(cache_sram->rh); + goto out_unmap; + } + + rh_attach_region(cache_sram->rh, 0, cache_sram->size); + spin_lock_init(&cache_sram->lock); + + dev_info(&dev->dev, "[base:0x%llx, size:0x%x] configured and loaded\n", + (unsigned long long)cache_sram->base_phys, cache_sram->size); + + return 0; + +out_unmap: + iounmap(cache_sram->base_virt); + +out_release: + release_mem_region(cache_sram->base_phys, cache_sram->size); + +out_free: + kfree(cache_sram); + return ret; +} + +void remove_cache_sram(struct platform_device *dev) +{ + BUG_ON(!cache_sram); + + rh_detach_region(cache_sram->rh, 0, cache_sram->size); + rh_destroy(cache_sram->rh); + + iounmap(cache_sram->base_virt); + release_mem_region(cache_sram->base_phys, cache_sram->size); + + kfree(cache_sram); + cache_sram = NULL; + + dev_info(&dev->dev, "MPC85xx Cache-SRAM driver unloaded\n"); +} diff --git a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c new file mode 100644 index 000000000000..cc8d6556d799 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c @@ -0,0 +1,231 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * QorIQ (P1/P2) L2 controller init for Cache-SRAM instantiation + * + * Author: Vivek Mahajan <vivek.mahajan@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/of_platform.h> +#include <asm/io.h> + +#include "fsl_85xx_cache_ctlr.h" + +static char *sram_size; +static char *sram_offset; +struct mpc85xx_l2ctlr __iomem *l2ctlr; + +static long get_cache_sram_size(void) +{ + unsigned long val; + + if (!sram_size || (strict_strtoul(sram_size, 0, &val) < 0)) + return -EINVAL; + + return val; +} + +static long get_cache_sram_offset(void) +{ + unsigned long val; + + if (!sram_offset || (strict_strtoul(sram_offset, 0, &val) < 0)) + return -EINVAL; + + return val; +} + +static int __init get_size_from_cmdline(char *str) +{ + if (!str) + return 0; + + sram_size = str; + return 1; +} + +static int __init get_offset_from_cmdline(char *str) +{ + if (!str) + return 0; + + sram_offset = str; + return 1; +} + +__setup("cache-sram-size=", get_size_from_cmdline); +__setup("cache-sram-offset=", get_offset_from_cmdline); + +static int __devinit mpc85xx_l2ctlr_of_probe(struct platform_device *dev, + const struct of_device_id *match) +{ + long rval; + unsigned int rem; + unsigned char ways; + const unsigned int *prop; + unsigned int l2cache_size; + struct sram_parameters sram_params; + + if (!dev->dev.of_node) { + dev_err(&dev->dev, "Device's OF-node is NULL\n"); + return -EINVAL; + } + + prop = of_get_property(dev->dev.of_node, "cache-size", NULL); + if (!prop) { + dev_err(&dev->dev, "Missing L2 cache-size\n"); + return -EINVAL; + } + l2cache_size = *prop; + + sram_params.sram_size = get_cache_sram_size(); + if (sram_params.sram_size <= 0) { + dev_err(&dev->dev, + "Entire L2 as cache, Aborting Cache-SRAM stuff\n"); + return -EINVAL; + } + + sram_params.sram_offset = get_cache_sram_offset(); + if (sram_params.sram_offset <= 0) { + dev_err(&dev->dev, + "Entire L2 as cache, provide a valid sram offset\n"); + return -EINVAL; + } + + + rem = l2cache_size % sram_params.sram_size; + ways = LOCK_WAYS_FULL * sram_params.sram_size / l2cache_size; + if (rem || (ways & (ways - 1))) { + dev_err(&dev->dev, "Illegal cache-sram-size in command line\n"); + return -EINVAL; + } + + l2ctlr = of_iomap(dev->dev.of_node, 0); + if (!l2ctlr) { + dev_err(&dev->dev, "Can't map L2 controller\n"); + return -EINVAL; + } + + /* + * Write bits[0-17] to srbar0 + */ + out_be32(&l2ctlr->srbar0, + sram_params.sram_offset & L2SRAM_BAR_MSK_LO18); + + /* + * Write bits[18-21] to srbare0 + */ +#ifdef CONFIG_PHYS_64BIT + out_be32(&l2ctlr->srbarea0, + (sram_params.sram_offset >> 32) & L2SRAM_BARE_MSK_HI4); +#endif + + clrsetbits_be32(&l2ctlr->ctl, L2CR_L2E, L2CR_L2FI); + + switch (ways) { + case LOCK_WAYS_EIGHTH: + setbits32(&l2ctlr->ctl, + L2CR_L2E | L2CR_L2FI | L2CR_SRAM_EIGHTH); + break; + + case LOCK_WAYS_TWO_EIGHTH: + setbits32(&l2ctlr->ctl, + L2CR_L2E | L2CR_L2FI | L2CR_SRAM_QUART); + break; + + case LOCK_WAYS_HALF: + setbits32(&l2ctlr->ctl, + L2CR_L2E | L2CR_L2FI | L2CR_SRAM_HALF); + break; + + case LOCK_WAYS_FULL: + default: + setbits32(&l2ctlr->ctl, + L2CR_L2E | L2CR_L2FI | L2CR_SRAM_FULL); + break; + } + eieio(); + + rval = instantiate_cache_sram(dev, sram_params); + if (rval < 0) { + dev_err(&dev->dev, "Can't instantiate Cache-SRAM\n"); + iounmap(l2ctlr); + return -EINVAL; + } + + return 0; +} + +static int __devexit mpc85xx_l2ctlr_of_remove(struct platform_device *dev) +{ + BUG_ON(!l2ctlr); + + iounmap(l2ctlr); + remove_cache_sram(dev); + dev_info(&dev->dev, "MPC85xx L2 controller unloaded\n"); + + return 0; +} + +static struct of_device_id mpc85xx_l2ctlr_of_match[] = { + { + .compatible = "fsl,p2020-l2-cache-controller", + }, + { + .compatible = "fsl,p2010-l2-cache-controller", + }, + { + .compatible = "fsl,p1020-l2-cache-controller", + }, + { + .compatible = "fsl,p1011-l2-cache-controller", + }, + { + .compatible = "fsl,p1013-l2-cache-controller", + }, + { + .compatible = "fsl,p1022-l2-cache-controller", + }, + {}, +}; + +static struct of_platform_driver mpc85xx_l2ctlr_of_platform_driver = { + .driver = { + .name = "fsl-l2ctlr", + .owner = THIS_MODULE, + .of_match_table = mpc85xx_l2ctlr_of_match, + }, + .probe = mpc85xx_l2ctlr_of_probe, + .remove = __devexit_p(mpc85xx_l2ctlr_of_remove), +}; + +static __init int mpc85xx_l2ctlr_of_init(void) +{ + return of_register_platform_driver(&mpc85xx_l2ctlr_of_platform_driver); +} + +static void __exit mpc85xx_l2ctlr_of_exit(void) +{ + of_unregister_platform_driver(&mpc85xx_l2ctlr_of_platform_driver); +} + +subsys_initcall(mpc85xx_l2ctlr_of_init); +module_exit(mpc85xx_l2ctlr_of_exit); + +MODULE_DESCRIPTION("Freescale MPC85xx L2 controller init"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index bdbd896c89d8..108d76fa8f1c 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -24,6 +24,7 @@ #include <asm/ppc-pci.h> #include <asm/mpic.h> #include "fsl_msi.h" +#include "fsl_pci.h" LIST_HEAD(msi_head); @@ -125,13 +126,11 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq, { struct fsl_msi *msi_data = fsl_msi_data; struct pci_controller *hose = pci_bus_to_host(pdev->bus); - u32 base = 0; + u64 base = fsl_pci_immrbar_base(hose); - pci_bus_read_config_dword(hose->bus, - PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base); + msg->address_lo = msi_data->msi_addr_lo + lower_32_bits(base); + msg->address_hi = msi_data->msi_addr_hi + upper_32_bits(base); - msg->address_lo = msi_data->msi_addr_lo + base; - msg->address_hi = msi_data->msi_addr_hi; msg->data = hwirq; pr_debug("%s: allocated srs: %d, ibs: %d\n", diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 4ae933225251..818f7c6c8fa1 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -1,7 +1,7 @@ /* * MPC83xx/85xx/86xx PCI/PCIE support routing. * - * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * Copyright 2008-2009 MontaVista Software, Inc. * * Initial author: Xianghua Xiao <x.xiao@freescale.com> @@ -34,7 +34,7 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> -static int fsl_pcie_bus_fixup; +static int fsl_pcie_bus_fixup, is_mpc83xx_pci; static void __init quirk_fsl_pcie_header(struct pci_dev *dev) { @@ -407,10 +407,18 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2040E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2040, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P3041E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P3041, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5010E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5010, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5020E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5020, quirk_fsl_pcie_header); #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) @@ -430,6 +438,13 @@ struct mpc83xx_pcie_priv { u32 dev_base; }; +struct pex_inbound_window { + u32 ar; + u32 tar; + u32 barl; + u32 barh; +}; + /* * With the convention of u-boot, the PCIE outbound window 0 serves * as configuration transactions outbound. @@ -437,6 +452,8 @@ struct mpc83xx_pcie_priv { #define PEX_OUTWIN0_BAR 0xCA4 #define PEX_OUTWIN0_TAL 0xCA8 #define PEX_OUTWIN0_TAH 0xCAC +#define PEX_RC_INWIN_BASE 0xE60 +#define PEX_RCIWARn_EN 0x1 static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn) { @@ -604,6 +621,8 @@ int __init mpc83xx_add_bridge(struct device_node *dev) const int *bus_range; int primary; + is_mpc83xx_pci = 1; + if (!of_device_is_available(dev)) { pr_warning("%s: disabled by the firmware.\n", dev->full_name); @@ -683,3 +702,40 @@ err0: return ret; } #endif /* CONFIG_PPC_83xx */ + +u64 fsl_pci_immrbar_base(struct pci_controller *hose) +{ +#ifdef CONFIG_PPC_83xx + if (is_mpc83xx_pci) { + struct mpc83xx_pcie_priv *pcie = hose->dn->data; + struct pex_inbound_window *in; + int i; + + /* Walk the Root Complex Inbound windows to match IMMR base */ + in = pcie->cfg_type0 + PEX_RC_INWIN_BASE; + for (i = 0; i < 4; i++) { + /* not enabled, skip */ + if (!in_le32(&in[i].ar) & PEX_RCIWARn_EN) + continue; + + if (get_immrbase() == in_le32(&in[i].tar)) + return (u64)in_le32(&in[i].barh) << 32 | + in_le32(&in[i].barl); + } + + printk(KERN_WARNING "could not find PCI BAR matching IMMR\n"); + } +#endif + +#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) + if (!is_mpc83xx_pci) { + u32 base; + + pci_bus_read_config_dword(hose->bus, + PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base); + return base; + } +#endif + + return 0; +} diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h index a9d8bbebed80..8ad72a11f77b 100644 --- a/arch/powerpc/sysdev/fsl_pci.h +++ b/arch/powerpc/sysdev/fsl_pci.h @@ -88,6 +88,7 @@ struct ccsr_pci { extern int fsl_add_bridge(struct device_node *dev, int is_primary); extern void fsl_pcibios_fixup_bus(struct pci_bus *bus); extern int mpc83xx_add_bridge(struct device_node *dev); +u64 fsl_pci_immrbar_base(struct pci_controller *hose); #endif /* __POWERPC_FSL_PCI_H */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 3017532319c8..412763672d23 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -117,44 +117,59 @@ struct rio_atmu_regs { }; struct rio_msg_regs { - u32 omr; - u32 osr; + u32 omr; /* 0xD_3000 - Outbound message 0 mode register */ + u32 osr; /* 0xD_3004 - Outbound message 0 status register */ u32 pad1; - u32 odqdpar; + u32 odqdpar; /* 0xD_300C - Outbound message 0 descriptor queue + dequeue pointer address register */ u32 pad2; - u32 osar; - u32 odpr; - u32 odatr; - u32 odcr; + u32 osar; /* 0xD_3014 - Outbound message 0 source address + register */ + u32 odpr; /* 0xD_3018 - Outbound message 0 destination port + register */ + u32 odatr; /* 0xD_301C - Outbound message 0 destination attributes + Register*/ + u32 odcr; /* 0xD_3020 - Outbound message 0 double-word count + register */ u32 pad3; - u32 odqepar; + u32 odqepar; /* 0xD_3028 - Outbound message 0 descriptor queue + enqueue pointer address register */ u32 pad4[13]; - u32 imr; - u32 isr; + u32 imr; /* 0xD_3060 - Inbound message 0 mode register */ + u32 isr; /* 0xD_3064 - Inbound message 0 status register */ u32 pad5; - u32 ifqdpar; + u32 ifqdpar; /* 0xD_306C - Inbound message 0 frame queue dequeue + pointer address register*/ u32 pad6; - u32 ifqepar; + u32 ifqepar; /* 0xD_3074 - Inbound message 0 frame queue enqueue + pointer address register */ u32 pad7[226]; - u32 odmr; - u32 odsr; + u32 odmr; /* 0xD_3400 - Outbound doorbell mode register */ + u32 odsr; /* 0xD_3404 - Outbound doorbell status register */ u32 res0[4]; - u32 oddpr; - u32 oddatr; + u32 oddpr; /* 0xD_3418 - Outbound doorbell destination port + register */ + u32 oddatr; /* 0xD_341c - Outbound doorbell destination attributes + register */ u32 res1[3]; - u32 odretcr; + u32 odretcr; /* 0xD_342C - Outbound doorbell retry error threshold + configuration register */ u32 res2[12]; - u32 dmr; - u32 dsr; + u32 dmr; /* 0xD_3460 - Inbound doorbell mode register */ + u32 dsr; /* 0xD_3464 - Inbound doorbell status register */ u32 pad8; - u32 dqdpar; + u32 dqdpar; /* 0xD_346C - Inbound doorbell queue dequeue Pointer + address register */ u32 pad9; - u32 dqepar; + u32 dqepar; /* 0xD_3474 - Inbound doorbell Queue enqueue pointer + address register */ u32 pad10[26]; - u32 pwmr; - u32 pwsr; - u32 epwqbar; - u32 pwqbar; + u32 pwmr; /* 0xD_34E0 - Inbound port-write mode register */ + u32 pwsr; /* 0xD_34E4 - Inbound port-write status register */ + u32 epwqbar; /* 0xD_34E8 - Extended Port-Write Queue Base Address + register */ + u32 pwqbar; /* 0xD_34EC - Inbound port-write queue base address + register */ }; struct rio_tx_desc { diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index b91f7acdda6f..6c67d9ebf166 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -378,17 +378,23 @@ static __be32 __iomem *rstcr; static int __init setup_rstcr(void) { struct device_node *np; - np = of_find_node_by_name(NULL, "global-utilities"); - if ((np && of_get_property(np, "fsl,has-rstcr", NULL))) { - rstcr = of_iomap(np, 0) + 0xb0; - if (!rstcr) - printk (KERN_EMERG "Error: reset control register " - "not mapped!\n"); - } else if (ppc_md.restart == fsl_rstcr_restart) + + for_each_node_by_name(np, "global-utilities") { + if ((of_get_property(np, "fsl,has-rstcr", NULL))) { + rstcr = of_iomap(np, 0) + 0xb0; + if (!rstcr) + printk (KERN_ERR "Error: reset control " + "register not mapped!\n"); + break; + } + } + + if (!rstcr && ppc_md.restart == fsl_rstcr_restart) printk(KERN_ERR "No RSTCR register, warm reboot won't work\n"); if (np) of_node_put(np); + return 0; } diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c index 2b69084d0f0c..c0ea05e87f1d 100644 --- a/arch/powerpc/sysdev/mpc8xxx_gpio.c +++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c @@ -330,6 +330,9 @@ static int __init mpc8xxx_add_gpiochips(void) for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio") mpc8xxx_add_controller(np); + for_each_compatible_node(np, NULL, "fsl,qoriq-gpio") + mpc8xxx_add_controller(np); + return 0; } arch_initcall(mpc8xxx_add_gpiochips); diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c index 24a0bb955b18..4260f368db52 100644 --- a/arch/powerpc/sysdev/pmi.c +++ b/arch/powerpc/sysdev/pmi.c @@ -114,7 +114,7 @@ static void pmi_notify_handlers(struct work_struct *work) spin_lock(&data->handler_spinlock); list_for_each_entry(handler, &data->handler, node) { - pr_debug(KERN_INFO "pmi: notifying handler %p\n", handler); + pr_debug("pmi: notifying handler %p\n", handler); if (handler->type == data->msg.type) handler->handle_pmi_message(data->msg); } diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index faa81b6a6612..c168c54e3c40 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -4,9 +4,7 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror GCOV_PROFILE := n -ifdef CONFIG_PPC64 -EXTRA_CFLAGS += -mno-minimal-toc -endif +ccflags-$(CONFIG_PPC64) := -mno-minimal-toc obj-y += xmon.o start.o nonstdio.o diff --git a/arch/s390/include/asm/irqflags.h b/arch/s390/include/asm/irqflags.h index 15b3ac253898..865d6d891ace 100644 --- a/arch/s390/include/asm/irqflags.h +++ b/arch/s390/include/asm/irqflags.h @@ -8,8 +8,8 @@ #include <linux/types.h> -/* store then or system mask. */ -#define __raw_local_irq_stosm(__or) \ +/* store then OR system mask. */ +#define __arch_local_irq_stosm(__or) \ ({ \ unsigned long __mask; \ asm volatile( \ @@ -18,8 +18,8 @@ __mask; \ }) -/* store then and system mask. */ -#define __raw_local_irq_stnsm(__and) \ +/* store then AND system mask. */ +#define __arch_local_irq_stnsm(__and) \ ({ \ unsigned long __mask; \ asm volatile( \ @@ -29,39 +29,44 @@ }) /* set system mask. */ -#define __raw_local_irq_ssm(__mask) \ -({ \ - asm volatile("ssm %0" : : "Q" (__mask) : "memory"); \ -}) +static inline void __arch_local_irq_ssm(unsigned long flags) +{ + asm volatile("ssm %0" : : "Q" (flags) : "memory"); +} -/* interrupt control.. */ -static inline unsigned long raw_local_irq_enable(void) +static inline unsigned long arch_local_save_flags(void) { - return __raw_local_irq_stosm(0x03); + return __arch_local_irq_stosm(0x00); } -static inline unsigned long raw_local_irq_disable(void) +static inline unsigned long arch_local_irq_save(void) { - return __raw_local_irq_stnsm(0xfc); + return __arch_local_irq_stnsm(0xfc); } -#define raw_local_save_flags(x) \ -do { \ - typecheck(unsigned long, x); \ - (x) = __raw_local_irq_stosm(0x00); \ -} while (0) +static inline void arch_local_irq_disable(void) +{ + arch_local_irq_save(); +} -static inline void raw_local_irq_restore(unsigned long flags) +static inline void arch_local_irq_enable(void) { - __raw_local_irq_ssm(flags); + __arch_local_irq_stosm(0x03); } -static inline int raw_irqs_disabled_flags(unsigned long flags) +static inline void arch_local_irq_restore(unsigned long flags) +{ + __arch_local_irq_ssm(flags); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) { return !(flags & (3UL << (BITS_PER_LONG - 8))); } -/* For spinlocks etc */ -#define raw_local_irq_save(x) ((x) = raw_local_irq_disable()) +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} #endif /* __ASM_IRQFLAGS_H */ diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h index 38ddd8a9a9e8..1f2ebc4afd82 100644 --- a/arch/s390/include/asm/system.h +++ b/arch/s390/include/asm/system.h @@ -398,7 +398,7 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr, static inline void __set_psw_mask(unsigned long mask) { - __load_psw_mask(mask | (__raw_local_irq_stosm(0x00) & ~(-1UL >> 8))); + __load_psw_mask(mask | (arch_local_save_flags() & ~(-1UL >> 8))); } #define local_mcck_enable() __set_psw_mask(psw_kernel_bits) diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c index 559af0d07878..0fbe4e32f7ba 100644 --- a/arch/s390/kernel/mem_detect.c +++ b/arch/s390/kernel/mem_detect.c @@ -54,11 +54,11 @@ void detect_memory_layout(struct mem_chunk chunk[]) * right thing and we don't get scheduled away with low address * protection disabled. */ - flags = __raw_local_irq_stnsm(0xf8); + flags = __arch_local_irq_stnsm(0xf8); __ctl_store(cr0, 0, 0); __ctl_clear_bit(0, 28); find_memory_chunks(chunk); __ctl_load(cr0, 0, 0); - __raw_local_irq_ssm(flags); + arch_local_irq_restore(flags); } EXPORT_SYMBOL(detect_memory_layout); diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 30eb6d02ddb8..94b8ba2ec857 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -50,7 +50,6 @@ EXPORT_SYMBOL(empty_zero_page); */ void __init paging_init(void) { - static const int ssm_mask = 0x04000000L; unsigned long max_zone_pfns[MAX_NR_ZONES]; unsigned long pgd_type; @@ -72,7 +71,7 @@ void __init paging_init(void) __ctl_load(S390_lowcore.kernel_asce, 1, 1); __ctl_load(S390_lowcore.kernel_asce, 7, 7); __ctl_load(S390_lowcore.kernel_asce, 13, 13); - __raw_local_irq_ssm(ssm_mask); + arch_local_irq_restore(4UL << (BITS_PER_LONG - 8)); atomic_set(&init_mm.context.attach_count, 1); diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c index a8c2af8c650f..71a4b0d34be0 100644 --- a/arch/s390/mm/maccess.c +++ b/arch/s390/mm/maccess.c @@ -71,7 +71,7 @@ int memcpy_real(void *dest, void *src, size_t count) if (!count) return 0; - flags = __raw_local_irq_stnsm(0xf8UL); + flags = __arch_local_irq_stnsm(0xf8UL); asm volatile ( "0: mvcle %1,%2,0x0\n" "1: jo 0b\n" @@ -82,6 +82,6 @@ int memcpy_real(void *dest, void *src, size_t count) "+d" (_len2), "=m" (*((long *) dest)) : "m" (*((long *) src)) : "cc", "memory"); - __raw_local_irq_ssm(flags); + arch_local_irq_restore(flags); return rc; } diff --git a/arch/score/include/asm/irqflags.h b/arch/score/include/asm/irqflags.h index 690a6cae7294..5c7563891e28 100644 --- a/arch/score/include/asm/irqflags.h +++ b/arch/score/include/asm/irqflags.h @@ -3,107 +3,118 @@ #ifndef __ASSEMBLY__ -#define raw_local_irq_save(x) \ -{ \ - __asm__ __volatile__( \ - "mfcr r8, cr0;" \ - "li r9, 0xfffffffe;" \ - "nop;" \ - "mv %0, r8;" \ - "and r8, r8, r9;" \ - "mtcr r8, cr0;" \ - "nop;" \ - "nop;" \ - "nop;" \ - "nop;" \ - "nop;" \ - : "=r" (x) \ - : \ - : "r8", "r9" \ - ); \ +#include <linux/types.h> + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + + asm volatile( + " mfcr r8, cr0 \n" + " nop \n" + " nop \n" + " mv %0, r8 \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " ldi r9, 0x1 \n" + " and %0, %0, r9 \n" + : "=r" (flags) + : + : "r8", "r9"); + return flags; } -#define raw_local_irq_restore(x) \ -{ \ - __asm__ __volatile__( \ - "mfcr r8, cr0;" \ - "ldi r9, 0x1;" \ - "and %0, %0, r9;" \ - "or r8, r8, %0;" \ - "mtcr r8, cr0;" \ - "nop;" \ - "nop;" \ - "nop;" \ - "nop;" \ - "nop;" \ - : \ - : "r"(x) \ - : "r8", "r9" \ - ); \ +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags + + asm volatile( + " mfcr r8, cr0 \n" + " li r9, 0xfffffffe \n" + " nop \n" + " mv %0, r8 \n" + " and r8, r8, r9 \n" + " mtcr r8, cr0 \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + : "=r" (flags) + : + : "r8", "r9", "memory"); + + return flags; } -#define raw_local_irq_enable(void) \ -{ \ - __asm__ __volatile__( \ - "mfcr\tr8,cr0;" \ - "nop;" \ - "nop;" \ - "ori\tr8,0x1;" \ - "mtcr\tr8,cr0;" \ - "nop;" \ - "nop;" \ - "nop;" \ - "nop;" \ - "nop;" \ - : \ - : \ - : "r8"); \ +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile( + " mfcr r8, cr0 \n" + " ldi r9, 0x1 \n" + " and %0, %0, r9 \n" + " or r8, r8, %0 \n" + " mtcr r8, cr0 \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + : + : "r"(flags) + : "r8", "r9", "memory"); } -#define raw_local_irq_disable(void) \ -{ \ - __asm__ __volatile__( \ - "mfcr\tr8,cr0;" \ - "nop;" \ - "nop;" \ - "srli\tr8,r8,1;" \ - "slli\tr8,r8,1;" \ - "mtcr\tr8,cr0;" \ - "nop;" \ - "nop;" \ - "nop;" \ - "nop;" \ - "nop;" \ - : \ - : \ - : "r8"); \ +static inline void arch_local_irq_enable(void) +{ + asm volatile( + " mfcr r8,cr0 \n" + " nop \n" + " nop \n" + " ori r8,0x1 \n" + " mtcr r8,cr0 \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + : + : + : "r8", "memory"); } -#define raw_local_save_flags(x) \ -{ \ - __asm__ __volatile__( \ - "mfcr r8, cr0;" \ - "nop;" \ - "nop;" \ - "mv %0, r8;" \ - "nop;" \ - "nop;" \ - "nop;" \ - "nop;" \ - "nop;" \ - "ldi r9, 0x1;" \ - "and %0, %0, r9;" \ - : "=r" (x) \ - : \ - : "r8", "r9" \ - ); \ +static inline void arch_local_irq_disable(void) +{ + asm volatile( + " mfcr r8,cr0 \n" + " nop \n" + " nop \n" + " srli r8,r8,1 \n" + " slli r8,r8,1 \n" + " mtcr r8,cr0 \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + : + : + : "r8", "memory"); } -static inline int raw_irqs_disabled_flags(unsigned long flags) +static inline bool arch_irqs_disabled_flags(unsigned long flags) { return !(flags & 1); } -#endif +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#endif /* __ASSEMBLY__ */ #endif /* _ASM_SCORE_IRQFLAGS_H */ diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h index a741153b41c2..43b7608606c3 100644 --- a/arch/sh/include/asm/irqflags.h +++ b/arch/sh/include/asm/irqflags.h @@ -1,8 +1,8 @@ #ifndef __ASM_SH_IRQFLAGS_H #define __ASM_SH_IRQFLAGS_H -#define RAW_IRQ_DISABLED 0xf0 -#define RAW_IRQ_ENABLED 0x00 +#define ARCH_IRQ_DISABLED 0xf0 +#define ARCH_IRQ_ENABLED 0x00 #include <asm-generic/irqflags.h> diff --git a/arch/sh/include/asm/memblock.h b/arch/sh/include/asm/memblock.h index dfe683b88075..e87063fad2ea 100644 --- a/arch/sh/include/asm/memblock.h +++ b/arch/sh/include/asm/memblock.h @@ -1,6 +1,4 @@ #ifndef __ASM_SH_MEMBLOCK_H #define __ASM_SH_MEMBLOCK_H -#define MEMBLOCK_REAL_LIMIT 0 - #endif /* __ASM_SH_MEMBLOCK_H */ diff --git a/arch/sh/include/asm/syscalls_32.h b/arch/sh/include/asm/syscalls_32.h index be201fdc97aa..ae717e3c26d6 100644 --- a/arch/sh/include/asm/syscalls_32.h +++ b/arch/sh/include/asm/syscalls_32.h @@ -19,9 +19,10 @@ asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, asmlinkage int sys_vfork(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs __regs); -asmlinkage int sys_execve(const char __user *ufilename, char __user * __user *uargv, - char __user * __user *uenvp, unsigned long r7, - struct pt_regs __regs); +asmlinkage int sys_execve(const char __user *ufilename, + const char __user *const __user *uargv, + const char __user *const __user *uenvp, + unsigned long r7, struct pt_regs __regs); asmlinkage int sys_sigsuspend(old_sigset_t mask, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs __regs); diff --git a/arch/sh/kernel/irq_32.c b/arch/sh/kernel/irq_32.c index e33ab15831f9..e5a755be9129 100644 --- a/arch/sh/kernel/irq_32.c +++ b/arch/sh/kernel/irq_32.c @@ -10,11 +10,11 @@ #include <linux/irqflags.h> #include <linux/module.h> -void notrace raw_local_irq_restore(unsigned long flags) +void notrace arch_local_irq_restore(unsigned long flags) { unsigned long __dummy0, __dummy1; - if (flags == RAW_IRQ_DISABLED) { + if (flags == ARCH_IRQ_DISABLED) { __asm__ __volatile__ ( "stc sr, %0\n\t" "or #0xf0, %0\n\t" @@ -33,14 +33,14 @@ void notrace raw_local_irq_restore(unsigned long flags) #endif "ldc %0, sr\n\t" : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~RAW_IRQ_DISABLED) + : "1" (~ARCH_IRQ_DISABLED) : "memory" ); } } -EXPORT_SYMBOL(raw_local_irq_restore); +EXPORT_SYMBOL(arch_local_irq_restore); -unsigned long notrace __raw_local_save_flags(void) +unsigned long notrace arch_local_save_flags(void) { unsigned long flags; @@ -54,4 +54,4 @@ unsigned long notrace __raw_local_save_flags(void) return flags; } -EXPORT_SYMBOL(__raw_local_save_flags); +EXPORT_SYMBOL(arch_local_save_flags); diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index d0e249100e98..552bea5113f5 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -200,7 +200,6 @@ static void __init bootmem_init_one_node(unsigned int nid) unsigned long total_pages, paddr; unsigned long end_pfn; struct pglist_data *p; - int i; p = NODE_DATA(nid); @@ -226,11 +225,12 @@ static void __init bootmem_init_one_node(unsigned int nid) * reservations in other nodes. */ if (nid == 0) { + struct memblock_region *reg; + /* Reserve the sections we're already using. */ - for (i = 0; i < memblock.reserved.cnt; i++) - reserve_bootmem(memblock.reserved.region[i].base, - memblock_size_bytes(&memblock.reserved, i), - BOOTMEM_DEFAULT); + for_each_memblock(reserved, reg) { + reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); + } } sparse_memory_present_with_active_regions(nid); @@ -238,13 +238,14 @@ static void __init bootmem_init_one_node(unsigned int nid) static void __init do_init_bootmem(void) { + struct memblock_region *reg; int i; /* Add active regions with valid PFNs. */ - for (i = 0; i < memblock.memory.cnt; i++) { + for_each_memblock(memory, reg) { unsigned long start_pfn, end_pfn; - start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT; - end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i); + start_pfn = memblock_region_memory_base_pfn(reg); + end_pfn = memblock_region_memory_end_pfn(reg); __add_active_range(0, start_pfn, end_pfn); } diff --git a/arch/sparc/include/asm/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h index 0fca9d97d44f..d4d0711de0f9 100644 --- a/arch/sparc/include/asm/irqflags_32.h +++ b/arch/sparc/include/asm/irqflags_32.h @@ -5,33 +5,40 @@ * * This file gets included from lowlevel asm headers too, to provide * wrapped versions of the local_irq_*() APIs, based on the - * raw_local_irq_*() functions from the lowlevel headers. + * arch_local_irq_*() functions from the lowlevel headers. */ #ifndef _ASM_IRQFLAGS_H #define _ASM_IRQFLAGS_H #ifndef __ASSEMBLY__ -extern void raw_local_irq_restore(unsigned long); -extern unsigned long __raw_local_irq_save(void); -extern void raw_local_irq_enable(void); +#include <linux/types.h> -static inline unsigned long getipl(void) +extern void arch_local_irq_restore(unsigned long); +extern unsigned long arch_local_irq_save(void); +extern void arch_local_irq_enable(void); + +static inline unsigned long arch_local_save_flags(void) { - unsigned long retval; + unsigned long flags; + + asm volatile("rd %%psr, %0" : "=r" (flags)); + return flags; +} - __asm__ __volatile__("rd %%psr, %0" : "=r" (retval)); - return retval; +static inline void arch_local_irq_disable(void) +{ + arch_local_irq_save(); } -#define raw_local_save_flags(flags) ((flags) = getipl()) -#define raw_local_irq_save(flags) ((flags) = __raw_local_irq_save()) -#define raw_local_irq_disable() ((void) __raw_local_irq_save()) -#define raw_irqs_disabled() ((getipl() & PSR_PIL) != 0) +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return (flags & PSR_PIL) != 0; +} -static inline int raw_irqs_disabled_flags(unsigned long flags) +static inline bool arch_irqs_disabled(void) { - return ((flags & PSR_PIL) != 0); + return arch_irqs_disabled_flags(arch_local_save_flags()); } #endif /* (__ASSEMBLY__) */ diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h index bfa1ea45b4cd..aab969c82c2b 100644 --- a/arch/sparc/include/asm/irqflags_64.h +++ b/arch/sparc/include/asm/irqflags_64.h @@ -5,7 +5,7 @@ * * This file gets included from lowlevel asm headers too, to provide * wrapped versions of the local_irq_*() APIs, based on the - * raw_local_irq_*() functions from the lowlevel headers. + * arch_local_irq_*() functions from the lowlevel headers. */ #ifndef _ASM_IRQFLAGS_H #define _ASM_IRQFLAGS_H @@ -14,7 +14,7 @@ #ifndef __ASSEMBLY__ -static inline unsigned long __raw_local_save_flags(void) +static inline unsigned long arch_local_save_flags(void) { unsigned long flags; @@ -26,10 +26,7 @@ static inline unsigned long __raw_local_save_flags(void) return flags; } -#define raw_local_save_flags(flags) \ - do { (flags) = __raw_local_save_flags(); } while (0) - -static inline void raw_local_irq_restore(unsigned long flags) +static inline void arch_local_irq_restore(unsigned long flags) { __asm__ __volatile__( "wrpr %0, %%pil" @@ -39,7 +36,7 @@ static inline void raw_local_irq_restore(unsigned long flags) ); } -static inline void raw_local_irq_disable(void) +static inline void arch_local_irq_disable(void) { __asm__ __volatile__( "wrpr %0, %%pil" @@ -49,7 +46,7 @@ static inline void raw_local_irq_disable(void) ); } -static inline void raw_local_irq_enable(void) +static inline void arch_local_irq_enable(void) { __asm__ __volatile__( "wrpr 0, %%pil" @@ -59,22 +56,17 @@ static inline void raw_local_irq_enable(void) ); } -static inline int raw_irqs_disabled_flags(unsigned long flags) +static inline int arch_irqs_disabled_flags(unsigned long flags) { return (flags > 0); } -static inline int raw_irqs_disabled(void) +static inline int arch_irqs_disabled(void) { - unsigned long flags = __raw_local_save_flags(); - - return raw_irqs_disabled_flags(flags); + return arch_irqs_disabled_flags(arch_local_save_flags()); } -/* - * For spinlocks, etc: - */ -static inline unsigned long __raw_local_irq_save(void) +static inline unsigned long arch_local_irq_save(void) { unsigned long flags, tmp; @@ -100,9 +92,6 @@ static inline unsigned long __raw_local_irq_save(void) return flags; } -#define raw_local_irq_save(flags) \ - do { (flags) = __raw_local_irq_save(); } while (0) - #endif /* (__ASSEMBLY__) */ #endif /* !(_ASM_IRQFLAGS_H) */ diff --git a/arch/sparc/include/asm/memblock.h b/arch/sparc/include/asm/memblock.h index f12af880649b..c67b047ef85e 100644 --- a/arch/sparc/include/asm/memblock.h +++ b/arch/sparc/include/asm/memblock.h @@ -5,6 +5,4 @@ #define MEMBLOCK_DBG(fmt...) prom_printf(fmt) -#define MEMBLOCK_REAL_LIMIT 0 - #endif /* !(_SPARC64_MEMBLOCK_H) */ diff --git a/arch/sparc/kernel/irq_32.c b/arch/sparc/kernel/irq_32.c index e1af43728329..0116d8d10def 100644 --- a/arch/sparc/kernel/irq_32.c +++ b/arch/sparc/kernel/irq_32.c @@ -57,7 +57,7 @@ #define SMP_NOP2 #define SMP_NOP3 #endif /* SMP */ -unsigned long __raw_local_irq_save(void) +unsigned long arch_local_irq_save(void) { unsigned long retval; unsigned long tmp; @@ -74,8 +74,9 @@ unsigned long __raw_local_irq_save(void) return retval; } +EXPORT_SYMBOL(arch_local_irq_save); -void raw_local_irq_enable(void) +void arch_local_irq_enable(void) { unsigned long tmp; @@ -89,8 +90,9 @@ void raw_local_irq_enable(void) : "i" (PSR_PIL) : "memory"); } +EXPORT_SYMBOL(arch_local_irq_enable); -void raw_local_irq_restore(unsigned long old_psr) +void arch_local_irq_restore(unsigned long old_psr) { unsigned long tmp; @@ -105,10 +107,7 @@ void raw_local_irq_restore(unsigned long old_psr) : "i" (PSR_PIL), "r" (old_psr) : "memory"); } - -EXPORT_SYMBOL(__raw_local_irq_save); -EXPORT_SYMBOL(raw_local_irq_enable); -EXPORT_SYMBOL(raw_local_irq_restore); +EXPORT_SYMBOL(arch_local_irq_restore); /* * Dave Redman (djhr@tadpole.co.uk) diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index f0434513df15..4c2572773b55 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -785,8 +785,7 @@ static int find_node(unsigned long addr) return -1; } -static unsigned long long nid_range(unsigned long long start, - unsigned long long end, int *nid) +u64 memblock_nid_range(u64 start, u64 end, int *nid) { *nid = find_node(start); start += PAGE_SIZE; @@ -804,8 +803,7 @@ static unsigned long long nid_range(unsigned long long start, return start; } #else -static unsigned long long nid_range(unsigned long long start, - unsigned long long end, int *nid) +u64 memblock_nid_range(u64 start, u64 end, int *nid) { *nid = 0; return end; @@ -822,8 +820,7 @@ static void __init allocate_node_data(int nid) struct pglist_data *p; #ifdef CONFIG_NEED_MULTIPLE_NODES - paddr = memblock_alloc_nid(sizeof(struct pglist_data), - SMP_CACHE_BYTES, nid, nid_range); + paddr = memblock_alloc_try_nid(sizeof(struct pglist_data), SMP_CACHE_BYTES, nid); if (!paddr) { prom_printf("Cannot allocate pglist_data for nid[%d]\n", nid); prom_halt(); @@ -843,8 +840,7 @@ static void __init allocate_node_data(int nid) if (p->node_spanned_pages) { num_pages = bootmem_bootmap_pages(p->node_spanned_pages); - paddr = memblock_alloc_nid(num_pages << PAGE_SHIFT, PAGE_SIZE, nid, - nid_range); + paddr = memblock_alloc_try_nid(num_pages << PAGE_SHIFT, PAGE_SIZE, nid); if (!paddr) { prom_printf("Cannot allocate bootmap for nid[%d]\n", nid); @@ -972,19 +968,19 @@ int of_node_to_nid(struct device_node *dp) static void __init add_node_ranges(void) { - int i; + struct memblock_region *reg; - for (i = 0; i < memblock.memory.cnt; i++) { - unsigned long size = memblock_size_bytes(&memblock.memory, i); + for_each_memblock(memory, reg) { + unsigned long size = reg->size; unsigned long start, end; - start = memblock.memory.region[i].base; + start = reg->base; end = start + size; while (start < end) { unsigned long this_end; int nid; - this_end = nid_range(start, end, &nid); + this_end = memblock_nid_range(start, end, &nid); numadbg("Adding active range nid[%d] " "start[%lx] end[%lx]\n", @@ -1281,7 +1277,7 @@ static void __init bootmem_init_nonnuma(void) { unsigned long top_of_ram = memblock_end_of_DRAM(); unsigned long total_ram = memblock_phys_mem_size(); - unsigned int i; + struct memblock_region *reg; numadbg("bootmem_init_nonnuma()\n"); @@ -1292,15 +1288,14 @@ static void __init bootmem_init_nonnuma(void) init_node_masks_nonnuma(); - for (i = 0; i < memblock.memory.cnt; i++) { - unsigned long size = memblock_size_bytes(&memblock.memory, i); + for_each_memblock(memory, reg) { unsigned long start_pfn, end_pfn; - if (!size) + if (!reg->size) continue; - start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT; - end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i); + start_pfn = memblock_region_memory_base_pfn(reg); + end_pfn = memblock_region_memory_end_pfn(reg); add_active_range(0, start_pfn, end_pfn); } @@ -1318,7 +1313,7 @@ static void __init reserve_range_in_node(int nid, unsigned long start, unsigned long this_end; int n; - this_end = nid_range(start, end, &n); + this_end = memblock_nid_range(start, end, &n); if (n == nid) { numadbg(" MATCH reserving range [%lx:%lx]\n", start, this_end); @@ -1334,17 +1329,12 @@ static void __init reserve_range_in_node(int nid, unsigned long start, static void __init trim_reserved_in_node(int nid) { - int i; + struct memblock_region *reg; numadbg(" trim_reserved_in_node(%d)\n", nid); - for (i = 0; i < memblock.reserved.cnt; i++) { - unsigned long start = memblock.reserved.region[i].base; - unsigned long size = memblock_size_bytes(&memblock.reserved, i); - unsigned long end = start + size; - - reserve_range_in_node(nid, start, end); - } + for_each_memblock(reserved, reg) + reserve_range_in_node(nid, reg->base, reg->base + reg->size); } static void __init bootmem_init_one_node(int nid) diff --git a/arch/sparc/prom/p1275.c b/arch/sparc/prom/p1275.c index fa6e4e219b9c..d9850c2b9bf2 100644 --- a/arch/sparc/prom/p1275.c +++ b/arch/sparc/prom/p1275.c @@ -39,7 +39,7 @@ void p1275_cmd_direct(unsigned long *args) unsigned long flags; raw_local_save_flags(flags); - raw_local_irq_restore(PIL_NMI); + raw_local_irq_restore((unsigned long)PIL_NMI); raw_spin_lock(&prom_entry_lock); prom_world(1); diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h index 45cf67c2f286..a11d4837ee4d 100644 --- a/arch/tile/include/asm/irqflags.h +++ b/arch/tile/include/asm/irqflags.h @@ -103,55 +103,57 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask); #define INITIAL_INTERRUPTS_ENABLED INT_MASK(INT_MEM_ERROR) /* Disable interrupts. */ -#define raw_local_irq_disable() \ +#define arch_local_irq_disable() \ interrupt_mask_set_mask(LINUX_MASKABLE_INTERRUPTS) /* Disable all interrupts, including NMIs. */ -#define raw_local_irq_disable_all() \ +#define arch_local_irq_disable_all() \ interrupt_mask_set_mask(-1UL) /* Re-enable all maskable interrupts. */ -#define raw_local_irq_enable() \ +#define arch_local_irq_enable() \ interrupt_mask_reset_mask(__get_cpu_var(interrupts_enabled_mask)) /* Disable or enable interrupts based on flag argument. */ -#define raw_local_irq_restore(disabled) do { \ +#define arch_local_irq_restore(disabled) do { \ if (disabled) \ - raw_local_irq_disable(); \ + arch_local_irq_disable(); \ else \ - raw_local_irq_enable(); \ + arch_local_irq_enable(); \ } while (0) /* Return true if "flags" argument means interrupts are disabled. */ -#define raw_irqs_disabled_flags(flags) ((flags) != 0) +#define arch_irqs_disabled_flags(flags) ((flags) != 0) /* Return true if interrupts are currently disabled. */ -#define raw_irqs_disabled() interrupt_mask_check(INT_MEM_ERROR) +#define arch_irqs_disabled() interrupt_mask_check(INT_MEM_ERROR) /* Save whether interrupts are currently disabled. */ -#define raw_local_save_flags(flags) ((flags) = raw_irqs_disabled()) +#define arch_local_save_flags() arch_irqs_disabled() /* Save whether interrupts are currently disabled, then disable them. */ -#define raw_local_irq_save(flags) \ - do { raw_local_save_flags(flags); raw_local_irq_disable(); } while (0) +#define arch_local_irq_save() ({ \ + unsigned long __flags = arch_local_save_flags(); \ + arch_local_irq_disable(); \ + __flags; }) /* Prevent the given interrupt from being enabled next time we enable irqs. */ -#define raw_local_irq_mask(interrupt) \ +#define arch_local_irq_mask(interrupt) \ (__get_cpu_var(interrupts_enabled_mask) &= ~INT_MASK(interrupt)) /* Prevent the given interrupt from being enabled immediately. */ -#define raw_local_irq_mask_now(interrupt) do { \ - raw_local_irq_mask(interrupt); \ +#define arch_local_irq_mask_now(interrupt) do { \ + arch_local_irq_mask(interrupt); \ interrupt_mask_set(interrupt); \ } while (0) /* Allow the given interrupt to be enabled next time we enable irqs. */ -#define raw_local_irq_unmask(interrupt) \ +#define arch_local_irq_unmask(interrupt) \ (__get_cpu_var(interrupts_enabled_mask) |= INT_MASK(interrupt)) /* Allow the given interrupt to be enabled immediately, if !irqs_disabled. */ -#define raw_local_irq_unmask_now(interrupt) do { \ - raw_local_irq_unmask(interrupt); \ +#define arch_local_irq_unmask_now(interrupt) do { \ + arch_local_irq_unmask(interrupt); \ if (!irqs_disabled()) \ interrupt_mask_reset(interrupt); \ } while (0) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 7ab9db88ab6a..dfabfefc21c4 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -28,6 +28,7 @@ config X86 select HAVE_IRQ_WORK select HAVE_IOREMAP_PROT select HAVE_KPROBES + select HAVE_MEMBLOCK select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_FRAME_POINTERS select HAVE_DMA_ATTRS @@ -201,9 +202,6 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y -config HAVE_EARLY_RES - def_bool y - config HAVE_INTEL_TXT def_bool y depends on EXPERIMENTAL && DMAR && ACPI @@ -548,16 +546,7 @@ config PARAVIRT_DEBUG a paravirt_op is missing when it is called. config NO_BOOTMEM - default y - bool "Disable Bootmem code" - ---help--- - Use early_res directly instead of bootmem before slab is ready. - - allocator (buddy) [generic] - - early allocator (bootmem) [generic] - - very early allocator (reserve_early*()) [x86] - - very very early allocator (early brk model) [x86] - So reduce one layer between early allocator to final allocator - + def_bool y config MEMTEST bool "Memtest" diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h index f16a2caca1e0..a6863a2dec1f 100644 --- a/arch/x86/include/asm/amd_iommu.h +++ b/arch/x86/include/asm/amd_iommu.h @@ -24,11 +24,11 @@ #ifdef CONFIG_AMD_IOMMU -extern void amd_iommu_detect(void); +extern int amd_iommu_detect(void); #else -static inline void amd_iommu_detect(void) { } +static inline int amd_iommu_detect(void) { return -ENODEV; } #endif diff --git a/arch/x86/include/asm/calgary.h b/arch/x86/include/asm/calgary.h index 0918654305af..0d467b338835 100644 --- a/arch/x86/include/asm/calgary.h +++ b/arch/x86/include/asm/calgary.h @@ -62,9 +62,9 @@ struct cal_chipset_ops { extern int use_calgary; #ifdef CONFIG_CALGARY_IOMMU -extern void detect_calgary(void); +extern int detect_calgary(void); #else -static inline void detect_calgary(void) { return; } +static inline int detect_calgary(void) { return -ENODEV; } #endif #endif /* _ASM_X86_CALGARY_H */ diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index ec8a52d14ab1..5be1542fbfaf 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -112,23 +112,13 @@ static inline void early_memtest(unsigned long start, unsigned long end) } #endif -extern unsigned long end_user_pfn; - -extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align); -extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align); -extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); -#include <linux/early_res.h> - extern unsigned long e820_end_of_ram_pfn(void); extern unsigned long e820_end_of_low_ram_pfn(void); -extern int e820_find_active_region(const struct e820entry *ei, - unsigned long start_pfn, - unsigned long last_pfn, - unsigned long *ei_startpfn, - unsigned long *ei_endpfn); -extern void e820_register_active_regions(int nid, unsigned long start_pfn, - unsigned long end_pfn); -extern u64 e820_hole_size(u64 start, u64 end); +extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); + +void memblock_x86_fill(void); +void memblock_find_dma_reserve(void); + extern void finish_e820_parsing(void); extern void e820_reserve_resources(void); extern void e820_reserve_resources_late(void); diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 8406ed7f9926..8e4a16508d4e 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -90,7 +90,7 @@ extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; -extern void efi_reserve_early(void); +extern void efi_memblock_x86_reserve_range(void); extern void efi_call_phys_prelog(void); extern void efi_call_phys_epilog(void); diff --git a/arch/x86/include/asm/gart.h b/arch/x86/include/asm/gart.h index bf357f9b25f0..43085bfc99c3 100644 --- a/arch/x86/include/asm/gart.h +++ b/arch/x86/include/asm/gart.h @@ -37,7 +37,7 @@ extern int gart_iommu_aperture_disabled; extern void early_gart_iommu_check(void); extern int gart_iommu_init(void); extern void __init gart_parse_options(char *); -extern void gart_iommu_hole_init(void); +extern int gart_iommu_hole_init(void); #else #define gart_iommu_aperture 0 @@ -50,8 +50,9 @@ static inline void early_gart_iommu_check(void) static inline void gart_parse_options(char *options) { } -static inline void gart_iommu_hole_init(void) +static inline int gart_iommu_hole_init(void) { + return -ENODEV; } #endif diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index 6a45ec41ec26..f0203f4791a8 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -349,6 +349,7 @@ extern void __iomem *early_memremap(resource_size_t phys_addr, unsigned long size); extern void early_iounmap(void __iomem *addr, unsigned long size); extern void fixup_early_ioremap(void); +extern bool is_early_ioremap_ptep(pte_t *ptep); #define IO_SPACE_LIMIT 0xffff diff --git a/arch/x86/include/asm/iommu_table.h b/arch/x86/include/asm/iommu_table.h new file mode 100644 index 000000000000..f229b13a5f30 --- /dev/null +++ b/arch/x86/include/asm/iommu_table.h @@ -0,0 +1,100 @@ +#ifndef _ASM_X86_IOMMU_TABLE_H +#define _ASM_X86_IOMMU_TABLE_H + +#include <asm/swiotlb.h> + +/* + * History lesson: + * The execution chain of IOMMUs in 2.6.36 looks as so: + * + * [xen-swiotlb] + * | + * +----[swiotlb *]--+ + * / | \ + * / | \ + * [GART] [Calgary] [Intel VT-d] + * / + * / + * [AMD-Vi] + * + * *: if SWIOTLB detected 'iommu=soft'/'swiotlb=force' it would skip + * over the rest of IOMMUs and unconditionally initialize the SWIOTLB. + * Also it would surreptitiously initialize set the swiotlb=1 if there were + * more than 4GB and if the user did not pass in 'iommu=off'. The swiotlb + * flag would be turned off by all IOMMUs except the Calgary one. + * + * The IOMMU_INIT* macros allow a similar tree (or more complex if desired) + * to be built by defining who we depend on. + * + * And all that needs to be done is to use one of the macros in the IOMMU + * and the pci-dma.c will take care of the rest. + */ + +struct iommu_table_entry { + initcall_t detect; + initcall_t depend; + void (*early_init)(void); /* No memory allocate available. */ + void (*late_init)(void); /* Yes, can allocate memory. */ +#define IOMMU_FINISH_IF_DETECTED (1<<0) +#define IOMMU_DETECTED (1<<1) + int flags; +}; +/* + * Macro fills out an entry in the .iommu_table that is equivalent + * to the fields that 'struct iommu_table_entry' has. The entries + * that are put in the .iommu_table section are not put in any order + * hence during boot-time we will have to resort them based on + * dependency. */ + + +#define __IOMMU_INIT(_detect, _depend, _early_init, _late_init, _finish)\ + static const struct iommu_table_entry const \ + __iommu_entry_##_detect __used \ + __attribute__ ((unused, __section__(".iommu_table"), \ + aligned((sizeof(void *))))) \ + = {_detect, _depend, _early_init, _late_init, \ + _finish ? IOMMU_FINISH_IF_DETECTED : 0} +/* + * The simplest IOMMU definition. Provide the detection routine + * and it will be run after the SWIOTLB and the other IOMMUs + * that utilize this macro. If the IOMMU is detected (ie, the + * detect routine returns a positive value), the other IOMMUs + * are also checked. You can use IOMMU_INIT_POST_FINISH if you prefer + * to stop detecting the other IOMMUs after yours has been detected. + */ +#define IOMMU_INIT_POST(_detect) \ + __IOMMU_INIT(_detect, pci_swiotlb_detect_4gb, 0, 0, 0) + +#define IOMMU_INIT_POST_FINISH(detect) \ + __IOMMU_INIT(_detect, pci_swiotlb_detect_4gb, 0, 0, 1) + +/* + * A more sophisticated version of IOMMU_INIT. This variant requires: + * a). A detection routine function. + * b). The name of the detection routine we depend on to get called + * before us. + * c). The init routine which gets called if the detection routine + * returns a positive value from the pci_iommu_alloc. This means + * no presence of a memory allocator. + * d). Similar to the 'init', except that this gets called from pci_iommu_init + * where we do have a memory allocator. + * + * The standard vs the _FINISH differs in that the _FINISH variant will + * continue detecting other IOMMUs in the call list after the + * the detection routine returns a positive number. The _FINISH will + * stop the execution chain. Both will still call the 'init' and + * 'late_init' functions if they are set. + */ +#define IOMMU_INIT_FINISH(_detect, _depend, _init, _late_init) \ + __IOMMU_INIT(_detect, _depend, _init, _late_init, 1) + +#define IOMMU_INIT(_detect, _depend, _init, _late_init) \ + __IOMMU_INIT(_detect, _depend, _init, _late_init, 0) + +void sort_iommu_table(struct iommu_table_entry *start, + struct iommu_table_entry *finish); + +void check_iommu_entries(struct iommu_table_entry *start, + struct iommu_table_entry *finish); + +#endif /* _ASM_X86_IOMMU_TABLE_H */ diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h index 9e2b952f810a..5745ce8bf108 100644 --- a/arch/x86/include/asm/irqflags.h +++ b/arch/x86/include/asm/irqflags.h @@ -61,22 +61,22 @@ static inline void native_halt(void) #else #ifndef __ASSEMBLY__ -static inline unsigned long __raw_local_save_flags(void) +static inline unsigned long arch_local_save_flags(void) { return native_save_fl(); } -static inline void raw_local_irq_restore(unsigned long flags) +static inline void arch_local_irq_restore(unsigned long flags) { native_restore_fl(flags); } -static inline void raw_local_irq_disable(void) +static inline void arch_local_irq_disable(void) { native_irq_disable(); } -static inline void raw_local_irq_enable(void) +static inline void arch_local_irq_enable(void) { native_irq_enable(); } @@ -85,7 +85,7 @@ static inline void raw_local_irq_enable(void) * Used in the idle loop; sti takes one instruction cycle * to complete: */ -static inline void raw_safe_halt(void) +static inline void arch_safe_halt(void) { native_safe_halt(); } @@ -102,12 +102,10 @@ static inline void halt(void) /* * For spinlocks, etc: */ -static inline unsigned long __raw_local_irq_save(void) +static inline unsigned long arch_local_irq_save(void) { - unsigned long flags = __raw_local_save_flags(); - - raw_local_irq_disable(); - + unsigned long flags = arch_local_save_flags(); + arch_local_irq_disable(); return flags; } #else @@ -153,22 +151,16 @@ static inline unsigned long __raw_local_irq_save(void) #endif /* CONFIG_PARAVIRT */ #ifndef __ASSEMBLY__ -#define raw_local_save_flags(flags) \ - do { (flags) = __raw_local_save_flags(); } while (0) - -#define raw_local_irq_save(flags) \ - do { (flags) = __raw_local_irq_save(); } while (0) - -static inline int raw_irqs_disabled_flags(unsigned long flags) +static inline int arch_irqs_disabled_flags(unsigned long flags) { return !(flags & X86_EFLAGS_IF); } -static inline int raw_irqs_disabled(void) +static inline int arch_irqs_disabled(void) { - unsigned long flags = __raw_local_save_flags(); + unsigned long flags = arch_local_save_flags(); - return raw_irqs_disabled_flags(flags); + return arch_irqs_disabled_flags(flags); } #else diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h new file mode 100644 index 000000000000..19ae14ba6978 --- /dev/null +++ b/arch/x86/include/asm/memblock.h @@ -0,0 +1,23 @@ +#ifndef _X86_MEMBLOCK_H +#define _X86_MEMBLOCK_H + +#define ARCH_DISCARD_MEMBLOCK + +u64 memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align); +void memblock_x86_to_bootmem(u64 start, u64 end); + +void memblock_x86_reserve_range(u64 start, u64 end, char *name); +void memblock_x86_free_range(u64 start, u64 end); +struct range; +int __get_free_all_memory_range(struct range **range, int nodeid, + unsigned long start_pfn, unsigned long end_pfn); +int get_free_all_memory_range(struct range **rangep, int nodeid); + +void memblock_x86_register_active_regions(int nid, unsigned long start_pfn, + unsigned long last_pfn); +u64 memblock_x86_hole_size(u64 start, u64 end); +u64 memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align); +u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit); +u64 memblock_x86_memory_in_range(u64 addr, u64 limit); + +#endif diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index edecb4ed2210..18e3b8a8709f 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -105,7 +105,7 @@ static inline void write_cr8(unsigned long x) } #endif -static inline void raw_safe_halt(void) +static inline void arch_safe_halt(void) { PVOP_VCALL0(pv_irq_ops.safe_halt); } @@ -824,32 +824,32 @@ static __always_inline void arch_spin_unlock(struct arch_spinlock *lock) #define __PV_IS_CALLEE_SAVE(func) \ ((struct paravirt_callee_save) { func }) -static inline unsigned long __raw_local_save_flags(void) +static inline unsigned long arch_local_save_flags(void) { return PVOP_CALLEE0(unsigned long, pv_irq_ops.save_fl); } -static inline void raw_local_irq_restore(unsigned long f) +static inline void arch_local_irq_restore(unsigned long f) { PVOP_VCALLEE1(pv_irq_ops.restore_fl, f); } -static inline void raw_local_irq_disable(void) +static inline void arch_local_irq_disable(void) { PVOP_VCALLEE0(pv_irq_ops.irq_disable); } -static inline void raw_local_irq_enable(void) +static inline void arch_local_irq_enable(void) { PVOP_VCALLEE0(pv_irq_ops.irq_enable); } -static inline unsigned long __raw_local_irq_save(void) +static inline unsigned long arch_local_irq_save(void) { unsigned long f; - f = __raw_local_save_flags(); - raw_local_irq_disable(); + f = arch_local_save_flags(); + arch_local_irq_disable(); return f; } diff --git a/arch/x86/include/asm/swiotlb.h b/arch/x86/include/asm/swiotlb.h index 8085277e1b8b..977f1761a25d 100644 --- a/arch/x86/include/asm/swiotlb.h +++ b/arch/x86/include/asm/swiotlb.h @@ -5,17 +5,26 @@ #ifdef CONFIG_SWIOTLB extern int swiotlb; -extern int __init pci_swiotlb_detect(void); +extern int __init pci_swiotlb_detect_override(void); +extern int __init pci_swiotlb_detect_4gb(void); extern void __init pci_swiotlb_init(void); +extern void __init pci_swiotlb_late_init(void); #else #define swiotlb 0 -static inline int pci_swiotlb_detect(void) +static inline int pci_swiotlb_detect_override(void) +{ + return 0; +} +static inline int pci_swiotlb_detect_4gb(void) { return 0; } static inline void pci_swiotlb_init(void) { } +static inline void pci_swiotlb_late_init(void) +{ +} #endif static inline void dma_mark_clean(void *addr, size_t size) {} diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 80a93dc99076..2c833d8c4141 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -45,6 +45,7 @@ obj-y += bootflag.o e820.o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o obj-y += tsc.o io_delay.o rtc.o +obj-y += pci-iommu_table.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o obj-y += process.o diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 33cec152070d..e1252074ea40 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -7,6 +7,7 @@ #include <linux/acpi.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/dmi.h> #include <linux/cpumask.h> #include <asm/segment.h> @@ -125,7 +126,7 @@ void acpi_restore_state_mem(void) */ void __init acpi_reserve_wakeup_memory(void) { - unsigned long mem; + phys_addr_t mem; if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) { printk(KERN_ERR @@ -133,15 +134,15 @@ void __init acpi_reserve_wakeup_memory(void) return; } - mem = find_e820_area(0, 1<<20, WAKEUP_SIZE, PAGE_SIZE); + mem = memblock_find_in_range(0, 1<<20, WAKEUP_SIZE, PAGE_SIZE); - if (mem == -1L) { + if (mem == MEMBLOCK_ERROR) { printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n"); return; } acpi_realmode = (unsigned long) phys_to_virt(mem); acpi_wakeup_address = mem; - reserve_early(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP"); + memblock_x86_reserve_range(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP"); } diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 3cb482e123de..6e11c8134158 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -31,7 +31,7 @@ #include <asm/iommu.h> #include <asm/gart.h> #include <asm/x86_init.h> - +#include <asm/iommu_table.h> /* * definitions for the ACPI scanning code */ @@ -1499,13 +1499,13 @@ static int __init early_amd_iommu_detect(struct acpi_table_header *table) return 0; } -void __init amd_iommu_detect(void) +int __init amd_iommu_detect(void) { if (no_iommu || (iommu_detected && !gart_iommu_aperture)) - return; + return -ENODEV; if (amd_iommu_disabled) - return; + return -ENODEV; if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) { iommu_detected = 1; @@ -1514,7 +1514,9 @@ void __init amd_iommu_detect(void) /* Make sure ACS will be enabled */ pci_request_acs(); + return 1; } + return -ENODEV; } /**************************************************************************** @@ -1545,3 +1547,8 @@ static int __init parse_amd_iommu_options(char *str) __setup("amd_iommu_dump", parse_amd_iommu_dump); __setup("amd_iommu=", parse_amd_iommu_options); + +IOMMU_INIT_FINISH(amd_iommu_detect, + gart_iommu_hole_init, + 0, + 0); diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 377f5db3b8b4..b3a16e8f0703 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -371,7 +371,7 @@ void __init early_gart_iommu_check(void) static int __initdata printed_gart_size_msg; -void __init gart_iommu_hole_init(void) +int __init gart_iommu_hole_init(void) { u32 agp_aper_base = 0, agp_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; @@ -381,7 +381,7 @@ void __init gart_iommu_hole_init(void) if (gart_iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) - return; + return -ENODEV; printk(KERN_INFO "Checking aperture...\n"); @@ -463,8 +463,9 @@ out: unsigned long n = (32 * 1024 * 1024) << last_aper_order; insert_aperture_resource((u32)last_aper_base, n); + return 1; } - return; + return 0; } if (!fallback_aper_force) { @@ -500,7 +501,7 @@ out: panic("Not enough memory for aperture"); } } else { - return; + return 0; } /* Fix up the north bridges */ @@ -526,4 +527,6 @@ out: } set_up_gart_resume(aper_order, aper_alloc); + + return 1; } diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index 3e28401f161c..960f26ab5c9f 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -26,6 +26,7 @@ #include <linux/nodemask.h> #include <linux/topology.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/threads.h> #include <linux/cpumask.h> #include <linux/kernel.h> @@ -88,7 +89,7 @@ static inline void numaq_register_node(int node, struct sys_cfg_data *scd) node_end_pfn[node] = MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size); - e820_register_active_regions(node, node_start_pfn[node], + memblock_x86_register_active_regions(node, node_start_pfn[node], node_end_pfn[node]); memory_present(node, node_start_pfn[node], node_end_pfn[node]); diff --git a/arch/x86/kernel/check.c b/arch/x86/kernel/check.c index fc999e6fc46a..13a389179514 100644 --- a/arch/x86/kernel/check.c +++ b/arch/x86/kernel/check.c @@ -2,7 +2,8 @@ #include <linux/sched.h> #include <linux/kthread.h> #include <linux/workqueue.h> -#include <asm/e820.h> +#include <linux/memblock.h> + #include <asm/proto.h> /* @@ -18,10 +19,12 @@ static int __read_mostly memory_corruption_check = -1; static unsigned __read_mostly corruption_check_size = 64*1024; static unsigned __read_mostly corruption_check_period = 60; /* seconds */ -static struct e820entry scan_areas[MAX_SCAN_AREAS]; +static struct scan_area { + u64 addr; + u64 size; +} scan_areas[MAX_SCAN_AREAS]; static int num_scan_areas; - static __init int set_corruption_check(char *arg) { char *end; @@ -81,9 +84,9 @@ void __init setup_bios_corruption_check(void) while (addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) { u64 size; - addr = find_e820_area_size(addr, &size, PAGE_SIZE); + addr = memblock_x86_find_in_range_size(addr, &size, PAGE_SIZE); - if (!(addr + 1)) + if (addr == MEMBLOCK_ERROR) break; if (addr >= corruption_check_size) @@ -92,7 +95,7 @@ void __init setup_bios_corruption_check(void) if ((addr + size) > corruption_check_size) size = corruption_check_size - addr; - e820_update_range(addr, size, E820_RAM, E820_RESERVED); + memblock_x86_reserve_range(addr, addr + size, "SCAN RAM"); scan_areas[num_scan_areas].addr = addr; scan_areas[num_scan_areas].size = size; num_scan_areas++; @@ -105,7 +108,6 @@ void __init setup_bios_corruption_check(void) printk(KERN_INFO "Scanning %d areas for low memory corruption\n", num_scan_areas); - update_e820(); } diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index fe73c1844a9a..a333bf9189f6 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -238,6 +238,7 @@ struct x86_pmu { * Intel DebugStore bits */ int bts, pebs; + int bts_active, pebs_active; int pebs_record_size; void (*drain_pebs)(struct pt_regs *regs); struct event_constraint *pebs_constraints; @@ -381,7 +382,7 @@ static void release_pmc_hardware(void) {} #endif -static int reserve_ds_buffers(void); +static void reserve_ds_buffers(void); static void release_ds_buffers(void); static void hw_perf_event_destroy(struct perf_event *event) @@ -478,7 +479,7 @@ static int x86_setup_perfctr(struct perf_event *event) if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) && (hwc->sample_period == 1)) { /* BTS is not supported by this architecture. */ - if (!x86_pmu.bts) + if (!x86_pmu.bts_active) return -EOPNOTSUPP; /* BTS is currently only allowed for user-mode. */ @@ -497,12 +498,13 @@ static int x86_pmu_hw_config(struct perf_event *event) int precise = 0; /* Support for constant skid */ - if (x86_pmu.pebs) + if (x86_pmu.pebs_active) { precise++; - /* Support for IP fixup */ - if (x86_pmu.lbr_nr) - precise++; + /* Support for IP fixup */ + if (x86_pmu.lbr_nr) + precise++; + } if (event->attr.precise_ip > precise) return -EOPNOTSUPP; @@ -544,11 +546,8 @@ static int __x86_pmu_event_init(struct perf_event *event) if (atomic_read(&active_events) == 0) { if (!reserve_pmc_hardware()) err = -EBUSY; - else { - err = reserve_ds_buffers(); - if (err) - release_pmc_hardware(); - } + else + reserve_ds_buffers(); } if (!err) atomic_inc(&active_events); diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 4977f9c400e5..b7dcd9f2b8a0 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -74,6 +74,107 @@ static void fini_debug_store_on_cpu(int cpu) wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA, 0, 0); } +static int alloc_pebs_buffer(int cpu) +{ + struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds; + int node = cpu_to_node(cpu); + int max, thresh = 1; /* always use a single PEBS record */ + void *buffer; + + if (!x86_pmu.pebs) + return 0; + + buffer = kmalloc_node(PEBS_BUFFER_SIZE, GFP_KERNEL | __GFP_ZERO, node); + if (unlikely(!buffer)) + return -ENOMEM; + + max = PEBS_BUFFER_SIZE / x86_pmu.pebs_record_size; + + ds->pebs_buffer_base = (u64)(unsigned long)buffer; + ds->pebs_index = ds->pebs_buffer_base; + ds->pebs_absolute_maximum = ds->pebs_buffer_base + + max * x86_pmu.pebs_record_size; + + ds->pebs_interrupt_threshold = ds->pebs_buffer_base + + thresh * x86_pmu.pebs_record_size; + + return 0; +} + +static void release_pebs_buffer(int cpu) +{ + struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds; + + if (!ds || !x86_pmu.pebs) + return; + + kfree((void *)(unsigned long)ds->pebs_buffer_base); + ds->pebs_buffer_base = 0; +} + +static int alloc_bts_buffer(int cpu) +{ + struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds; + int node = cpu_to_node(cpu); + int max, thresh; + void *buffer; + + if (!x86_pmu.bts) + return 0; + + buffer = kmalloc_node(BTS_BUFFER_SIZE, GFP_KERNEL | __GFP_ZERO, node); + if (unlikely(!buffer)) + return -ENOMEM; + + max = BTS_BUFFER_SIZE / BTS_RECORD_SIZE; + thresh = max / 16; + + ds->bts_buffer_base = (u64)(unsigned long)buffer; + ds->bts_index = ds->bts_buffer_base; + ds->bts_absolute_maximum = ds->bts_buffer_base + + max * BTS_RECORD_SIZE; + ds->bts_interrupt_threshold = ds->bts_absolute_maximum - + thresh * BTS_RECORD_SIZE; + + return 0; +} + +static void release_bts_buffer(int cpu) +{ + struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds; + + if (!ds || !x86_pmu.bts) + return; + + kfree((void *)(unsigned long)ds->bts_buffer_base); + ds->bts_buffer_base = 0; +} + +static int alloc_ds_buffer(int cpu) +{ + int node = cpu_to_node(cpu); + struct debug_store *ds; + + ds = kmalloc_node(sizeof(*ds), GFP_KERNEL | __GFP_ZERO, node); + if (unlikely(!ds)) + return -ENOMEM; + + per_cpu(cpu_hw_events, cpu).ds = ds; + + return 0; +} + +static void release_ds_buffer(int cpu) +{ + struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds; + + if (!ds) + return; + + per_cpu(cpu_hw_events, cpu).ds = NULL; + kfree(ds); +} + static void release_ds_buffers(void) { int cpu; @@ -82,93 +183,77 @@ static void release_ds_buffers(void) return; get_online_cpus(); - for_each_online_cpu(cpu) fini_debug_store_on_cpu(cpu); for_each_possible_cpu(cpu) { - struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds; - - if (!ds) - continue; - - per_cpu(cpu_hw_events, cpu).ds = NULL; - - kfree((void *)(unsigned long)ds->pebs_buffer_base); - kfree((void *)(unsigned long)ds->bts_buffer_base); - kfree(ds); + release_pebs_buffer(cpu); + release_bts_buffer(cpu); + release_ds_buffer(cpu); } - put_online_cpus(); } -static int reserve_ds_buffers(void) +static void reserve_ds_buffers(void) { - int cpu, err = 0; + int bts_err = 0, pebs_err = 0; + int cpu; + + x86_pmu.bts_active = 0; + x86_pmu.pebs_active = 0; if (!x86_pmu.bts && !x86_pmu.pebs) - return 0; + return; + + if (!x86_pmu.bts) + bts_err = 1; + + if (!x86_pmu.pebs) + pebs_err = 1; get_online_cpus(); for_each_possible_cpu(cpu) { - struct debug_store *ds; - void *buffer; - int max, thresh; + if (alloc_ds_buffer(cpu)) { + bts_err = 1; + pebs_err = 1; + } + + if (!bts_err && alloc_bts_buffer(cpu)) + bts_err = 1; - err = -ENOMEM; - ds = kzalloc(sizeof(*ds), GFP_KERNEL); - if (unlikely(!ds)) + if (!pebs_err && alloc_pebs_buffer(cpu)) + pebs_err = 1; + + if (bts_err && pebs_err) break; - per_cpu(cpu_hw_events, cpu).ds = ds; - - if (x86_pmu.bts) { - buffer = kzalloc(BTS_BUFFER_SIZE, GFP_KERNEL); - if (unlikely(!buffer)) - break; - - max = BTS_BUFFER_SIZE / BTS_RECORD_SIZE; - thresh = max / 16; - - ds->bts_buffer_base = (u64)(unsigned long)buffer; - ds->bts_index = ds->bts_buffer_base; - ds->bts_absolute_maximum = ds->bts_buffer_base + - max * BTS_RECORD_SIZE; - ds->bts_interrupt_threshold = ds->bts_absolute_maximum - - thresh * BTS_RECORD_SIZE; - } + } - if (x86_pmu.pebs) { - buffer = kzalloc(PEBS_BUFFER_SIZE, GFP_KERNEL); - if (unlikely(!buffer)) - break; - - max = PEBS_BUFFER_SIZE / x86_pmu.pebs_record_size; - - ds->pebs_buffer_base = (u64)(unsigned long)buffer; - ds->pebs_index = ds->pebs_buffer_base; - ds->pebs_absolute_maximum = ds->pebs_buffer_base + - max * x86_pmu.pebs_record_size; - /* - * Always use single record PEBS - */ - ds->pebs_interrupt_threshold = ds->pebs_buffer_base + - x86_pmu.pebs_record_size; - } + if (bts_err) { + for_each_possible_cpu(cpu) + release_bts_buffer(cpu); + } - err = 0; + if (pebs_err) { + for_each_possible_cpu(cpu) + release_pebs_buffer(cpu); } - if (err) - release_ds_buffers(); - else { + if (bts_err && pebs_err) { + for_each_possible_cpu(cpu) + release_ds_buffer(cpu); + } else { + if (x86_pmu.bts && !bts_err) + x86_pmu.bts_active = 1; + + if (x86_pmu.pebs && !pebs_err) + x86_pmu.pebs_active = 1; + for_each_online_cpu(cpu) init_debug_store_on_cpu(cpu); } put_online_cpus(); - - return err; } /* @@ -233,7 +318,7 @@ static int intel_pmu_drain_bts_buffer(void) if (!event) return 0; - if (!ds) + if (!x86_pmu.bts_active) return 0; at = (struct bts_record *)(unsigned long)ds->bts_buffer_base; @@ -503,7 +588,7 @@ static void intel_pmu_drain_pebs_core(struct pt_regs *iregs) struct pebs_record_core *at, *top; int n; - if (!ds || !x86_pmu.pebs) + if (!x86_pmu.pebs_active) return; at = (struct pebs_record_core *)(unsigned long)ds->pebs_buffer_base; @@ -545,7 +630,7 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs) u64 status = 0; int bit, n; - if (!ds || !x86_pmu.pebs) + if (!x86_pmu.pebs_active) return; at = (struct pebs_record_nhm *)(unsigned long)ds->pebs_buffer_base; @@ -630,9 +715,8 @@ static void intel_ds_init(void) #else /* CONFIG_CPU_SUP_INTEL */ -static int reserve_ds_buffers(void) +static void reserve_ds_buffers(void) { - return 0; } static void release_ds_buffers(void) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 0d6fc71bedb1..0c2b7ef7a34d 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -15,6 +15,7 @@ #include <linux/pfn.h> #include <linux/suspend.h> #include <linux/firmware-map.h> +#include <linux/memblock.h> #include <asm/e820.h> #include <asm/proto.h> @@ -738,73 +739,7 @@ core_initcall(e820_mark_nvs_memory); #endif /* - * Find a free area with specified alignment in a specific range. - */ -u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 addr; - u64 ei_start, ei_last; - - if (ei->type != E820_RAM) - continue; - - ei_last = ei->addr + ei->size; - ei_start = ei->addr; - addr = find_early_area(ei_start, ei_last, start, end, - size, align); - - if (addr != -1ULL) - return addr; - } - return -1ULL; -} - -u64 __init find_fw_memmap_area(u64 start, u64 end, u64 size, u64 align) -{ - return find_e820_area(start, end, size, align); -} - -u64 __init get_max_mapped(void) -{ - u64 end = max_pfn_mapped; - - end <<= PAGE_SHIFT; - - return end; -} -/* - * Find next free range after *start - */ -u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 addr; - u64 ei_start, ei_last; - - if (ei->type != E820_RAM) - continue; - - ei_last = ei->addr + ei->size; - ei_start = ei->addr; - addr = find_early_area_size(ei_start, ei_last, start, - sizep, align); - - if (addr != -1ULL) - return addr; - } - - return -1ULL; -} - -/* - * pre allocated 4k and reserved it in e820 + * pre allocated 4k and reserved it in memblock and e820_saved */ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) { @@ -813,8 +748,8 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) u64 start; for (start = startt; ; start += size) { - start = find_e820_area_size(start, &size, align); - if (!(start + 1)) + start = memblock_x86_find_in_range_size(start, &size, align); + if (start == MEMBLOCK_ERROR) return 0; if (size >= sizet) break; @@ -830,10 +765,9 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) addr = round_down(start + size - sizet, align); if (addr < start) return 0; - e820_update_range(addr, sizet, E820_RAM, E820_RESERVED); + memblock_x86_reserve_range(addr, addr + sizet, "new next"); e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED); - printk(KERN_INFO "update e820 for early_reserve_e820\n"); - update_e820(); + printk(KERN_INFO "update e820_saved for early_reserve_e820\n"); update_e820_saved(); return addr; @@ -895,74 +829,6 @@ unsigned long __init e820_end_of_low_ram_pfn(void) { return e820_end_pfn(1UL<<(32 - PAGE_SHIFT), E820_RAM); } -/* - * Finds an active region in the address range from start_pfn to last_pfn and - * returns its range in ei_startpfn and ei_endpfn for the e820 entry. - */ -int __init e820_find_active_region(const struct e820entry *ei, - unsigned long start_pfn, - unsigned long last_pfn, - unsigned long *ei_startpfn, - unsigned long *ei_endpfn) -{ - u64 align = PAGE_SIZE; - - *ei_startpfn = round_up(ei->addr, align) >> PAGE_SHIFT; - *ei_endpfn = round_down(ei->addr + ei->size, align) >> PAGE_SHIFT; - - /* Skip map entries smaller than a page */ - if (*ei_startpfn >= *ei_endpfn) - return 0; - - /* Skip if map is outside the node */ - if (ei->type != E820_RAM || *ei_endpfn <= start_pfn || - *ei_startpfn >= last_pfn) - return 0; - - /* Check for overlaps */ - if (*ei_startpfn < start_pfn) - *ei_startpfn = start_pfn; - if (*ei_endpfn > last_pfn) - *ei_endpfn = last_pfn; - - return 1; -} - -/* Walk the e820 map and register active regions within a node */ -void __init e820_register_active_regions(int nid, unsigned long start_pfn, - unsigned long last_pfn) -{ - unsigned long ei_startpfn; - unsigned long ei_endpfn; - int i; - - for (i = 0; i < e820.nr_map; i++) - if (e820_find_active_region(&e820.map[i], - start_pfn, last_pfn, - &ei_startpfn, &ei_endpfn)) - add_active_range(nid, ei_startpfn, ei_endpfn); -} - -/* - * Find the hole size (in bytes) in the memory range. - * @start: starting address of the memory range to scan - * @end: ending address of the memory range to scan - */ -u64 __init e820_hole_size(u64 start, u64 end) -{ - unsigned long start_pfn = start >> PAGE_SHIFT; - unsigned long last_pfn = end >> PAGE_SHIFT; - unsigned long ei_startpfn, ei_endpfn, ram = 0; - int i; - - for (i = 0; i < e820.nr_map; i++) { - if (e820_find_active_region(&e820.map[i], - start_pfn, last_pfn, - &ei_startpfn, &ei_endpfn)) - ram += ei_endpfn - ei_startpfn; - } - return end - start - ((u64)ram << PAGE_SHIFT); -} static void early_panic(char *msg) { @@ -1210,3 +1076,48 @@ void __init setup_memory_map(void) printk(KERN_INFO "BIOS-provided physical RAM map:\n"); e820_print_map(who); } + +void __init memblock_x86_fill(void) +{ + int i; + u64 end; + + /* + * EFI may have more than 128 entries + * We are safe to enable resizing, beause memblock_x86_fill() + * is rather later for x86 + */ + memblock_can_resize = 1; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + end = ei->addr + ei->size; + if (end != (resource_size_t)end) + continue; + + if (ei->type != E820_RAM && ei->type != E820_RESERVED_KERN) + continue; + + memblock_add(ei->addr, ei->size); + } + + memblock_analyze(); + memblock_dump_all(); +} + +void __init memblock_find_dma_reserve(void) +{ +#ifdef CONFIG_X86_64 + u64 free_size_pfn; + u64 mem_size_pfn; + /* + * need to find out used area below MAX_DMA_PFN + * need to use memblock to get free size in [0, MAX_DMA_PFN] + * at first, and assume boot_mem will not take below MAX_DMA_PFN + */ + mem_size_pfn = memblock_x86_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT; + free_size_pfn = memblock_x86_free_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT; + set_dma_reserve(mem_size_pfn - free_size_pfn); +#endif +} diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index c2fa9b8b497e..0fe27d7c6258 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -30,6 +30,7 @@ #include <linux/init.h> #include <linux/efi.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/spinlock.h> #include <linux/uaccess.h> #include <linux/time.h> @@ -275,7 +276,7 @@ static void __init do_add_efi_memmap(void) sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); } -void __init efi_reserve_early(void) +void __init efi_memblock_x86_reserve_range(void) { unsigned long pmap; @@ -290,7 +291,7 @@ void __init efi_reserve_early(void) boot_params.efi_info.efi_memdesc_size; memmap.desc_version = boot_params.efi_info.efi_memdesc_version; memmap.desc_size = boot_params.efi_info.efi_memdesc_size; - reserve_early(pmap, pmap + memmap.nr_map * memmap.desc_size, + memblock_x86_reserve_range(pmap, pmap + memmap.nr_map * memmap.desc_size, "EFI memmap"); } diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c index 3e66bd364a9d..af0699ba48cf 100644 --- a/arch/x86/kernel/head.c +++ b/arch/x86/kernel/head.c @@ -1,5 +1,6 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/bios_ebda.h> @@ -51,5 +52,5 @@ void __init reserve_ebda_region(void) lowmem = 0x9f000; /* reserve all memory between lowmem and the 1MB mark */ - reserve_early_overlap_ok(lowmem, 0x100000, "BIOS reserved"); + memblock_x86_reserve_range(lowmem, 0x100000, "* BIOS reserved"); } diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 784360c0625c..9a6ca2392170 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/start_kernel.h> #include <linux/mm.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/sections.h> @@ -30,17 +31,18 @@ static void __init i386_default_early_setup(void) void __init i386_start_kernel(void) { + memblock_init(); + #ifdef CONFIG_X86_TRAMPOLINE /* * But first pinch a few for the stack/trampoline stuff * FIXME: Don't need the extra page at 4K, but need to fix * trampoline before removing it. (see the GDT stuff) */ - reserve_early_overlap_ok(PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, - "EX TRAMPOLINE"); + memblock_x86_reserve_range(PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE"); #endif - reserve_early(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS"); + memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS"); #ifdef CONFIG_BLK_DEV_INITRD /* Reserve INITRD */ @@ -49,7 +51,7 @@ void __init i386_start_kernel(void) u64 ramdisk_image = boot_params.hdr.ramdisk_image; u64 ramdisk_size = boot_params.hdr.ramdisk_size; u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); - reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); + memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK"); } #endif diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 7147143fd614..2d2673c28aff 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -12,6 +12,7 @@ #include <linux/percpu.h> #include <linux/start_kernel.h> #include <linux/io.h> +#include <linux/memblock.h> #include <asm/processor.h> #include <asm/proto.h> @@ -79,6 +80,8 @@ void __init x86_64_start_kernel(char * real_mode_data) /* Cleanup the over mapped high alias */ cleanup_highmap(); + max_pfn_mapped = KERNEL_IMAGE_SIZE >> PAGE_SHIFT; + for (i = 0; i < NUM_EXCEPTION_VECTORS; i++) { #ifdef CONFIG_EARLY_PRINTK set_intr_gate(i, &early_idt_handlers[i]); @@ -98,7 +101,9 @@ void __init x86_64_start_reservations(char *real_mode_data) { copy_bootdata(__va(real_mode_data)); - reserve_early(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS"); + memblock_init(); + + memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS"); #ifdef CONFIG_BLK_DEV_INITRD /* Reserve INITRD */ @@ -107,7 +112,7 @@ void __init x86_64_start_reservations(char *real_mode_data) unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; unsigned long ramdisk_size = boot_params.hdr.ramdisk_size; unsigned long ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); - reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); + memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK"); } #endif diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index d7b6f7fb4fec..9af64d9c4b67 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/kernel_stat.h> #include <linux/mc146818rtc.h> #include <linux/bitops.h> @@ -657,7 +658,7 @@ static void __init smp_reserve_memory(struct mpf_intel *mpf) { unsigned long size = get_mpc_size(mpf->physptr); - reserve_early_overlap_ok(mpf->physptr, mpf->physptr+size, "MP-table mpc"); + memblock_x86_reserve_range(mpf->physptr, mpf->physptr+size, "* MP-table mpc"); } static int __init smp_scan_config(unsigned long base, unsigned long length) @@ -686,7 +687,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length) mpf, (u64)virt_to_phys(mpf)); mem = virt_to_phys(mpf); - reserve_early_overlap_ok(mem, mem + sizeof(*mpf), "MP-table mpf"); + memblock_x86_reserve_range(mem, mem + sizeof(*mpf), "* MP-table mpf"); if (mpf->physptr) smp_reserve_memory(mpf); diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index 078d4ec1a9d9..f56a117cef68 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -47,6 +47,7 @@ #include <asm/rio.h> #include <asm/bios_ebda.h> #include <asm/x86_init.h> +#include <asm/iommu_table.h> #ifdef CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT int use_calgary __read_mostly = 1; @@ -1364,7 +1365,7 @@ static int __init calgary_iommu_init(void) return 0; } -void __init detect_calgary(void) +int __init detect_calgary(void) { int bus; void *tbl; @@ -1378,13 +1379,13 @@ void __init detect_calgary(void) * another HW IOMMU already, bail out. */ if (no_iommu || iommu_detected) - return; + return -ENODEV; if (!use_calgary) - return; + return -ENODEV; if (!early_pci_allowed()) - return; + return -ENODEV; printk(KERN_DEBUG "Calgary: detecting Calgary via BIOS EBDA area\n"); @@ -1410,13 +1411,13 @@ void __init detect_calgary(void) if (!rio_table_hdr) { printk(KERN_DEBUG "Calgary: Unable to locate Rio Grande table " "in EBDA - bailing!\n"); - return; + return -ENODEV; } ret = build_detail_arrays(); if (ret) { printk(KERN_DEBUG "Calgary: build_detail_arrays ret %d\n", ret); - return; + return -ENOMEM; } specified_table_size = determine_tce_table_size((is_kdump_kernel() ? @@ -1464,7 +1465,7 @@ void __init detect_calgary(void) x86_init.iommu.iommu_init = calgary_iommu_init; } - return; + return calgary_found; cleanup: for (--bus; bus >= 0; --bus) { @@ -1473,6 +1474,7 @@ cleanup: if (info->tce_space) free_tce_table(info->tce_space); } + return -ENOMEM; } static int __init calgary_parse_options(char *p) @@ -1594,3 +1596,5 @@ static int __init calgary_fixup_tce_spaces(void) * and before device_initcall. */ rootfs_initcall(calgary_fixup_tce_spaces); + +IOMMU_INIT_POST(detect_calgary); diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 9f07cfcbd3a5..9ea999a4dcc1 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -11,9 +11,8 @@ #include <asm/iommu.h> #include <asm/gart.h> #include <asm/calgary.h> -#include <asm/amd_iommu.h> #include <asm/x86_init.h> -#include <asm/xen/swiotlb-xen.h> +#include <asm/iommu_table.h> static int forbid_dac __read_mostly; @@ -45,6 +44,8 @@ int iommu_detected __read_mostly = 0; */ int iommu_pass_through __read_mostly; +extern struct iommu_table_entry __iommu_table[], __iommu_table_end[]; + /* Dummy device used for NULL arguments (normally ISA). */ struct device x86_dma_fallback_dev = { .init_name = "fallback device", @@ -130,26 +131,24 @@ static void __init dma32_free_bootmem(void) void __init pci_iommu_alloc(void) { + struct iommu_table_entry *p; + /* free the range so iommu could get some range less than 4G */ dma32_free_bootmem(); - if (pci_xen_swiotlb_detect() || pci_swiotlb_detect()) - goto out; - - gart_iommu_hole_init(); - - detect_calgary(); - - detect_intel_iommu(); + sort_iommu_table(__iommu_table, __iommu_table_end); + check_iommu_entries(__iommu_table, __iommu_table_end); - /* needs to be called after gart_iommu_hole_init */ - amd_iommu_detect(); -out: - pci_xen_swiotlb_init(); - - pci_swiotlb_init(); + for (p = __iommu_table; p < __iommu_table_end; p++) { + if (p && p->detect && p->detect() > 0) { + p->flags |= IOMMU_DETECTED; + if (p->early_init) + p->early_init(); + if (p->flags & IOMMU_FINISH_IF_DETECTED) + break; + } + } } - void *dma_generic_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_addr, gfp_t flag) { @@ -292,6 +291,7 @@ EXPORT_SYMBOL(dma_supported); static int __init pci_iommu_init(void) { + struct iommu_table_entry *p; dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); #ifdef CONFIG_PCI @@ -299,12 +299,10 @@ static int __init pci_iommu_init(void) #endif x86_init.iommu.iommu_init(); - if (swiotlb || xen_swiotlb) { - printk(KERN_INFO "PCI-DMA: " - "Using software bounce buffering for IO (SWIOTLB)\n"); - swiotlb_print_info(); - } else - swiotlb_free(); + for (p = __iommu_table; p < __iommu_table_end; p++) { + if (p && (p->flags & IOMMU_DETECTED) && p->late_init) + p->late_init(); + } return 0; } diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index c562207b1b3d..ba0f0ca9f280 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -41,6 +41,7 @@ #include <asm/dma.h> #include <asm/amd_nb.h> #include <asm/x86_init.h> +#include <asm/iommu_table.h> static unsigned long iommu_bus_base; /* GART remapping area (physical) */ static unsigned long iommu_size; /* size of remapping area bytes */ @@ -905,3 +906,4 @@ void __init gart_parse_options(char *p) } } } +IOMMU_INIT_POST(gart_iommu_hole_init); diff --git a/arch/x86/kernel/pci-iommu_table.c b/arch/x86/kernel/pci-iommu_table.c new file mode 100644 index 000000000000..55d745ec1181 --- /dev/null +++ b/arch/x86/kernel/pci-iommu_table.c @@ -0,0 +1,89 @@ +#include <linux/dma-mapping.h> +#include <asm/iommu_table.h> +#include <linux/string.h> +#include <linux/kallsyms.h> + + +#define DEBUG 1 + +static struct iommu_table_entry * __init +find_dependents_of(struct iommu_table_entry *start, + struct iommu_table_entry *finish, + struct iommu_table_entry *q) +{ + struct iommu_table_entry *p; + + if (!q) + return NULL; + + for (p = start; p < finish; p++) + if (p->detect == q->depend) + return p; + + return NULL; +} + + +void __init sort_iommu_table(struct iommu_table_entry *start, + struct iommu_table_entry *finish) { + + struct iommu_table_entry *p, *q, tmp; + + for (p = start; p < finish; p++) { +again: + q = find_dependents_of(start, finish, p); + /* We are bit sneaky here. We use the memory address to figure + * out if the node we depend on is past our point, if so, swap. + */ + if (q > p) { + tmp = *p; + memmove(p, q, sizeof(*p)); + *q = tmp; + goto again; + } + } + +} + +#ifdef DEBUG +void __init check_iommu_entries(struct iommu_table_entry *start, + struct iommu_table_entry *finish) +{ + struct iommu_table_entry *p, *q, *x; + char sym_p[KSYM_SYMBOL_LEN]; + char sym_q[KSYM_SYMBOL_LEN]; + + /* Simple cyclic dependency checker. */ + for (p = start; p < finish; p++) { + q = find_dependents_of(start, finish, p); + x = find_dependents_of(start, finish, q); + if (p == x) { + sprint_symbol(sym_p, (unsigned long)p->detect); + sprint_symbol(sym_q, (unsigned long)q->detect); + + printk(KERN_ERR "CYCLIC DEPENDENCY FOUND! %s depends" \ + " on %s and vice-versa. BREAKING IT.\n", + sym_p, sym_q); + /* Heavy handed way..*/ + x->depend = 0; + } + } + + for (p = start; p < finish; p++) { + q = find_dependents_of(p, finish, p); + if (q && q > p) { + sprint_symbol(sym_p, (unsigned long)p->detect); + sprint_symbol(sym_q, (unsigned long)q->detect); + + printk(KERN_ERR "EXECUTION ORDER INVALID! %s "\ + "should be called before %s!\n", + sym_p, sym_q); + } + } +} +#else +inline void check_iommu_entries(struct iommu_table_entry *start, + struct iommu_table_entry *finish) +{ +} +#endif diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c index a5bc528d4328..8f972cbddef0 100644 --- a/arch/x86/kernel/pci-swiotlb.c +++ b/arch/x86/kernel/pci-swiotlb.c @@ -10,7 +10,8 @@ #include <asm/iommu.h> #include <asm/swiotlb.h> #include <asm/dma.h> - +#include <asm/xen/swiotlb-xen.h> +#include <asm/iommu_table.h> int swiotlb __read_mostly; static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size, @@ -41,25 +42,42 @@ static struct dma_map_ops swiotlb_dma_ops = { }; /* - * pci_swiotlb_detect - set swiotlb to 1 if necessary + * pci_swiotlb_detect_override - set swiotlb to 1 if necessary * * This returns non-zero if we are forced to use swiotlb (by the boot * option). */ -int __init pci_swiotlb_detect(void) +int __init pci_swiotlb_detect_override(void) { int use_swiotlb = swiotlb | swiotlb_force; + if (swiotlb_force) + swiotlb = 1; + + return use_swiotlb; +} +IOMMU_INIT_FINISH(pci_swiotlb_detect_override, + pci_xen_swiotlb_detect, + pci_swiotlb_init, + pci_swiotlb_late_init); + +/* + * if 4GB or more detected (and iommu=off not set) return 1 + * and set swiotlb to 1. + */ +int __init pci_swiotlb_detect_4gb(void) +{ /* don't initialize swiotlb if iommu=off (no_iommu=1) */ #ifdef CONFIG_X86_64 if (!no_iommu && max_pfn > MAX_DMA32_PFN) swiotlb = 1; #endif - if (swiotlb_force) - swiotlb = 1; - - return use_swiotlb; + return swiotlb; } +IOMMU_INIT(pci_swiotlb_detect_4gb, + pci_swiotlb_detect_override, + pci_swiotlb_init, + pci_swiotlb_late_init); void __init pci_swiotlb_init(void) { @@ -68,3 +86,15 @@ void __init pci_swiotlb_init(void) dma_ops = &swiotlb_dma_ops; } } + +void __init pci_swiotlb_late_init(void) +{ + /* An IOMMU turned us off. */ + if (!swiotlb) + swiotlb_free(); + else { + printk(KERN_INFO "PCI-DMA: " + "Using software bounce buffering for IO (SWIOTLB)\n"); + swiotlb_print_info(); + } +} diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index a59f6a6df5e2..420e64197850 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -31,6 +31,7 @@ #include <linux/apm_bios.h> #include <linux/initrd.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/seq_file.h> #include <linux/console.h> #include <linux/mca.h> @@ -301,7 +302,7 @@ static inline void init_gbpages(void) static void __init reserve_brk(void) { if (_brk_end > _brk_start) - reserve_early(__pa(_brk_start), __pa(_brk_end), "BRK"); + memblock_x86_reserve_range(__pa(_brk_start), __pa(_brk_end), "BRK"); /* Mark brk area as locked down and no longer taking any new allocations */ @@ -323,17 +324,16 @@ static void __init relocate_initrd(void) char *p, *q; /* We need to move the initrd down into lowmem */ - ramdisk_here = find_e820_area(0, end_of_lowmem, area_size, + ramdisk_here = memblock_find_in_range(0, end_of_lowmem, area_size, PAGE_SIZE); - if (ramdisk_here == -1ULL) + if (ramdisk_here == MEMBLOCK_ERROR) panic("Cannot find place for new RAMDISK of size %lld\n", ramdisk_size); /* Note: this includes all the lowmem currently occupied by the initrd, we rely on that fact to keep the data intact. */ - reserve_early(ramdisk_here, ramdisk_here + area_size, - "NEW RAMDISK"); + memblock_x86_reserve_range(ramdisk_here, ramdisk_here + area_size, "NEW RAMDISK"); initrd_start = ramdisk_here + PAGE_OFFSET; initrd_end = initrd_start + ramdisk_size; printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n", @@ -389,7 +389,7 @@ static void __init reserve_initrd(void) initrd_start = 0; if (ramdisk_size >= (end_of_lowmem>>1)) { - free_early(ramdisk_image, ramdisk_end); + memblock_x86_free_range(ramdisk_image, ramdisk_end); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; @@ -412,7 +412,7 @@ static void __init reserve_initrd(void) relocate_initrd(); - free_early(ramdisk_image, ramdisk_end); + memblock_x86_free_range(ramdisk_image, ramdisk_end); } #else static void __init reserve_initrd(void) @@ -468,7 +468,7 @@ static void __init e820_reserve_setup_data(void) e820_print_map("reserve setup_data"); } -static void __init reserve_early_setup_data(void) +static void __init memblock_x86_reserve_range_setup_data(void) { struct setup_data *data; u64 pa_data; @@ -480,7 +480,7 @@ static void __init reserve_early_setup_data(void) while (pa_data) { data = early_memremap(pa_data, sizeof(*data)); sprintf(buf, "setup data %x", data->type); - reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf); + memblock_x86_reserve_range(pa_data, pa_data+sizeof(*data)+data->len, buf); pa_data = data->next; early_iounmap(data, sizeof(*data)); } @@ -501,6 +501,7 @@ static inline unsigned long long get_total_mem(void) return total << PAGE_SHIFT; } +#define DEFAULT_BZIMAGE_ADDR_MAX 0x37FFFFFF static void __init reserve_crashkernel(void) { unsigned long long total_mem; @@ -518,23 +519,27 @@ static void __init reserve_crashkernel(void) if (crash_base <= 0) { const unsigned long long alignment = 16<<20; /* 16M */ - crash_base = find_e820_area(alignment, ULONG_MAX, crash_size, - alignment); - if (crash_base == -1ULL) { + /* + * kexec want bzImage is below DEFAULT_BZIMAGE_ADDR_MAX + */ + crash_base = memblock_find_in_range(alignment, + DEFAULT_BZIMAGE_ADDR_MAX, crash_size, alignment); + + if (crash_base == MEMBLOCK_ERROR) { pr_info("crashkernel reservation failed - No suitable area found.\n"); return; } } else { unsigned long long start; - start = find_e820_area(crash_base, ULONG_MAX, crash_size, - 1<<20); + start = memblock_find_in_range(crash_base, + crash_base + crash_size, crash_size, 1<<20); if (start != crash_base) { pr_info("crashkernel reservation failed - memory is in use.\n"); return; } } - reserve_early(crash_base, crash_base + crash_size, "CRASH KERNEL"); + memblock_x86_reserve_range(crash_base, crash_base + crash_size, "CRASH KERNEL"); printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " "for crashkernel (System RAM: %ldMB)\n", @@ -614,7 +619,7 @@ static __init void reserve_ibft_region(void) addr = find_ibft_region(&size); if (size) - reserve_early_overlap_ok(addr, addr + size, "ibft"); + memblock_x86_reserve_range(addr, addr + size, "* ibft"); } static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10; @@ -664,6 +669,15 @@ static int __init parse_reservelow(char *p) early_param("reservelow", parse_reservelow); +static u64 __init get_max_mapped(void) +{ + u64 end = max_pfn_mapped; + + end <<= PAGE_SHIFT; + + return end; +} + /* * Determine if we were loaded by an EFI loader. If so, then we have also been * passed the efi memmap, systab, etc., so we should use these data structures @@ -738,7 +752,7 @@ void __init setup_arch(char **cmdline_p) #endif 4)) { efi_enabled = 1; - efi_reserve_early(); + efi_memblock_x86_reserve_range(); } #endif @@ -795,7 +809,7 @@ void __init setup_arch(char **cmdline_p) x86_report_nx(); /* after early param, so could get panic from serial */ - reserve_early_setup_data(); + memblock_x86_reserve_range_setup_data(); if (acpi_mps_check()) { #ifdef CONFIG_X86_LOCAL_APIC @@ -848,8 +862,6 @@ void __init setup_arch(char **cmdline_p) */ max_pfn = e820_end_of_ram_pfn(); - /* preallocate 4k for mptable mpc */ - early_reserve_e820_mpc_new(); /* update e820 for memory not covered by WB MTRRs */ mtrr_bp_init(); if (mtrr_trim_uncached_memory(max_pfn)) @@ -871,18 +883,8 @@ void __init setup_arch(char **cmdline_p) max_low_pfn = max_pfn; high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; - max_pfn_mapped = KERNEL_IMAGE_SIZE >> PAGE_SHIFT; -#endif - -#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION - setup_bios_corruption_check(); #endif - printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n", - max_pfn_mapped<<PAGE_SHIFT); - - reserve_brk(); - /* * Find and reserve possible boot-time SMP configuration: */ @@ -890,6 +892,26 @@ void __init setup_arch(char **cmdline_p) reserve_ibft_region(); + /* + * Need to conclude brk, before memblock_x86_fill() + * it could use memblock_find_in_range, could overlap with + * brk area. + */ + reserve_brk(); + + memblock.current_limit = get_max_mapped(); + memblock_x86_fill(); + + /* preallocate 4k for mptable mpc */ + early_reserve_e820_mpc_new(); + +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION + setup_bios_corruption_check(); +#endif + + printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n", + max_pfn_mapped<<PAGE_SHIFT); + reserve_trampoline_memory(); #ifdef CONFIG_ACPI_SLEEP @@ -913,6 +935,7 @@ void __init setup_arch(char **cmdline_p) max_low_pfn = max_pfn; } #endif + memblock.current_limit = get_max_mapped(); /* * NOTE: On x86-32, only from this point on, fixmaps are ready for use. @@ -951,10 +974,7 @@ void __init setup_arch(char **cmdline_p) #endif initmem_init(0, max_pfn, acpi, k8); -#ifndef CONFIG_NO_BOOTMEM - early_res_to_bootmem(0, max_low_pfn<<PAGE_SHIFT); -#endif - + memblock_find_dma_reserve(); dma32_reserve_bootmem(); #ifdef CONFIG_KVM_CLOCK diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 2335c15c93a4..002b79685f73 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -131,13 +131,7 @@ static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align) static void __init pcpu_fc_free(void *ptr, size_t size) { -#ifdef CONFIG_NO_BOOTMEM - u64 start = __pa(ptr); - u64 end = start + size; - free_early_partial(start, end); -#else free_bootmem(__pa(ptr), size); -#endif } static int __init pcpu_cpu_distance(unsigned int from, unsigned int to) diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c index e2a595257390..4c3da5674e67 100644 --- a/arch/x86/kernel/trampoline.c +++ b/arch/x86/kernel/trampoline.c @@ -1,8 +1,8 @@ #include <linux/io.h> +#include <linux/memblock.h> #include <asm/trampoline.h> #include <asm/pgtable.h> -#include <asm/e820.h> #if defined(CONFIG_X86_64) && defined(CONFIG_ACPI_SLEEP) #define __trampinit @@ -17,15 +17,15 @@ unsigned char *__trampinitdata trampoline_base; void __init reserve_trampoline_memory(void) { - unsigned long mem; + phys_addr_t mem; /* Has to be in very low memory so we can execute real-mode AP code. */ - mem = find_e820_area(0, 1<<20, TRAMPOLINE_SIZE, PAGE_SIZE); - if (mem == -1L) + mem = memblock_find_in_range(0, 1<<20, TRAMPOLINE_SIZE, PAGE_SIZE); + if (mem == MEMBLOCK_ERROR) panic("Cannot allocate trampoline\n"); trampoline_base = __va(mem); - reserve_early(mem, mem + TRAMPOLINE_SIZE, "TRAMPOLINE"); + memblock_x86_reserve_range(mem, mem + TRAMPOLINE_SIZE, "TRAMPOLINE"); } /* diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index d0bb52296fa3..38e2b67807e1 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -242,6 +242,12 @@ SECTIONS __x86_cpu_dev_end = .; } + /* + * start address and size of operations which during runtime + * can be patched with virtualization friendly instructions or + * baremetal native ones. Think page table operations. + * Details in paravirt_types.h + */ . = ALIGN(8); .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { __parainstructions = .; @@ -249,6 +255,11 @@ SECTIONS __parainstructions_end = .; } + /* + * struct alt_inst entries. From the header (alternative.h): + * "Alternative instructions for different CPU types or capabilities" + * Think locking instructions on spinlocks. + */ . = ALIGN(8); .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { __alt_instructions = .; @@ -256,11 +267,28 @@ SECTIONS __alt_instructions_end = .; } + /* + * And here are the replacement instructions. The linker sticks + * them as binary blobs. The .altinstructions has enough data to + * get the address and the length of them to patch the kernel safely. + */ .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { *(.altinstr_replacement) } /* + * struct iommu_table_entry entries are injected in this section. + * It is an array of IOMMUs which during run time gets sorted depending + * on its dependency order. After rootfs_initcall is complete + * this section can be safely removed. + */ + .iommu_table : AT(ADDR(.iommu_table) - LOAD_OFFSET) { + __iommu_table = .; + *(.iommu_table) + __iommu_table_end = .; + } + . = ALIGN(8); + /* * .exit.text is discard at runtime, not link time, to deal with * references from .altinstructions and .eh_frame */ diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index a4c768397baa..55543397a8a7 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -26,4 +26,6 @@ obj-$(CONFIG_NUMA) += numa.o numa_$(BITS).o obj-$(CONFIG_K8_NUMA) += k8topology_64.o obj-$(CONFIG_ACPI_NUMA) += srat_$(BITS).o +obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o + obj-$(CONFIG_MEMTEST) += memtest.o diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index b278535b14aa..c0e28a13de7d 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -2,6 +2,7 @@ #include <linux/initrd.h> #include <linux/ioport.h> #include <linux/swap.h> +#include <linux/memblock.h> #include <asm/cacheflush.h> #include <asm/e820.h> @@ -33,6 +34,7 @@ static void __init find_early_table_space(unsigned long end, int use_pse, int use_gbpages) { unsigned long puds, pmds, ptes, tables, start; + phys_addr_t base; puds = (end + PUD_SIZE - 1) >> PUD_SHIFT; tables = roundup(puds * sizeof(pud_t), PAGE_SIZE); @@ -75,12 +77,12 @@ static void __init find_early_table_space(unsigned long end, int use_pse, #else start = 0x8000; #endif - e820_table_start = find_e820_area(start, max_pfn_mapped<<PAGE_SHIFT, + base = memblock_find_in_range(start, max_pfn_mapped<<PAGE_SHIFT, tables, PAGE_SIZE); - if (e820_table_start == -1UL) + if (base == MEMBLOCK_ERROR) panic("Cannot find space for the kernel page tables"); - e820_table_start >>= PAGE_SHIFT; + e820_table_start = base >> PAGE_SHIFT; e820_table_end = e820_table_start; e820_table_top = e820_table_start + (tables >> PAGE_SHIFT); @@ -299,7 +301,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, __flush_tlb_all(); if (!after_bootmem && e820_table_end > e820_table_start) - reserve_early(e820_table_start << PAGE_SHIFT, + memblock_x86_reserve_range(e820_table_start << PAGE_SHIFT, e820_table_end << PAGE_SHIFT, "PGTABLE"); if (!after_bootmem) diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 558f2d332076..5d0a6711c282 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -25,6 +25,7 @@ #include <linux/pfn.h> #include <linux/poison.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/proc_fs.h> #include <linux/memory_hotplug.h> #include <linux/initrd.h> @@ -422,49 +423,28 @@ static void __init add_one_highpage_init(struct page *page) totalhigh_pages++; } -struct add_highpages_data { - unsigned long start_pfn; - unsigned long end_pfn; -}; - -static int __init add_highpages_work_fn(unsigned long start_pfn, - unsigned long end_pfn, void *datax) +void __init add_highpages_with_active_regions(int nid, + unsigned long start_pfn, unsigned long end_pfn) { - int node_pfn; - struct page *page; - unsigned long final_start_pfn, final_end_pfn; - struct add_highpages_data *data; + struct range *range; + int nr_range; + int i; - data = (struct add_highpages_data *)datax; + nr_range = __get_free_all_memory_range(&range, nid, start_pfn, end_pfn); - final_start_pfn = max(start_pfn, data->start_pfn); - final_end_pfn = min(end_pfn, data->end_pfn); - if (final_start_pfn >= final_end_pfn) - return 0; + for (i = 0; i < nr_range; i++) { + struct page *page; + int node_pfn; - for (node_pfn = final_start_pfn; node_pfn < final_end_pfn; - node_pfn++) { - if (!pfn_valid(node_pfn)) - continue; - page = pfn_to_page(node_pfn); - add_one_highpage_init(page); + for (node_pfn = range[i].start; node_pfn < range[i].end; + node_pfn++) { + if (!pfn_valid(node_pfn)) + continue; + page = pfn_to_page(node_pfn); + add_one_highpage_init(page); + } } - - return 0; - } - -void __init add_highpages_with_active_regions(int nid, unsigned long start_pfn, - unsigned long end_pfn) -{ - struct add_highpages_data data; - - data.start_pfn = start_pfn; - data.end_pfn = end_pfn; - - work_with_active_regions(nid, add_highpages_work_fn, &data); -} - #else static inline void permanent_kmaps_init(pgd_t *pgd_base) { @@ -712,14 +692,14 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn, highstart_pfn = highend_pfn = max_pfn; if (max_pfn > max_low_pfn) highstart_pfn = max_low_pfn; - e820_register_active_regions(0, 0, highend_pfn); + memblock_x86_register_active_regions(0, 0, highend_pfn); sparse_memory_present_with_active_regions(0); printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", pages_to_mb(highend_pfn - highstart_pfn)); num_physpages = highend_pfn; high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1; #else - e820_register_active_regions(0, 0, max_low_pfn); + memblock_x86_register_active_regions(0, 0, max_low_pfn); sparse_memory_present_with_active_regions(0); num_physpages = max_low_pfn; high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1; @@ -750,68 +730,12 @@ static void __init zone_sizes_init(void) free_area_init_nodes(max_zone_pfns); } -#ifndef CONFIG_NO_BOOTMEM -static unsigned long __init setup_node_bootmem(int nodeid, - unsigned long start_pfn, - unsigned long end_pfn, - unsigned long bootmap) -{ - unsigned long bootmap_size; - - /* don't touch min_low_pfn */ - bootmap_size = init_bootmem_node(NODE_DATA(nodeid), - bootmap >> PAGE_SHIFT, - start_pfn, end_pfn); - printk(KERN_INFO " node %d low ram: %08lx - %08lx\n", - nodeid, start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT); - printk(KERN_INFO " node %d bootmap %08lx - %08lx\n", - nodeid, bootmap, bootmap + bootmap_size); - free_bootmem_with_active_regions(nodeid, end_pfn); - - return bootmap + bootmap_size; -} -#endif - void __init setup_bootmem_allocator(void) { -#ifndef CONFIG_NO_BOOTMEM - int nodeid; - unsigned long bootmap_size, bootmap; - /* - * Initialize the boot-time allocator (with low memory only): - */ - bootmap_size = bootmem_bootmap_pages(max_low_pfn)<<PAGE_SHIFT; - bootmap = find_e820_area(0, max_pfn_mapped<<PAGE_SHIFT, bootmap_size, - PAGE_SIZE); - if (bootmap == -1L) - panic("Cannot find bootmem map of size %ld\n", bootmap_size); - reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP"); -#endif - printk(KERN_INFO " mapped low ram: 0 - %08lx\n", max_pfn_mapped<<PAGE_SHIFT); printk(KERN_INFO " low ram: 0 - %08lx\n", max_low_pfn<<PAGE_SHIFT); -#ifndef CONFIG_NO_BOOTMEM - for_each_online_node(nodeid) { - unsigned long start_pfn, end_pfn; - -#ifdef CONFIG_NEED_MULTIPLE_NODES - start_pfn = node_start_pfn[nodeid]; - end_pfn = node_end_pfn[nodeid]; - if (start_pfn > max_low_pfn) - continue; - if (end_pfn > max_low_pfn) - end_pfn = max_low_pfn; -#else - start_pfn = 0; - end_pfn = max_low_pfn; -#endif - bootmap = setup_node_bootmem(nodeid, start_pfn, end_pfn, - bootmap); - } -#endif - after_bootmem = 1; } @@ -1070,8 +994,3 @@ void mark_rodata_ro(void) } #endif -int __init reserve_bootmem_generic(unsigned long phys, unsigned long len, - int flags) -{ - return reserve_bootmem(phys, len, flags); -} diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index c55f900fbf89..84346200e783 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -21,6 +21,7 @@ #include <linux/initrd.h> #include <linux/pagemap.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/proc_fs.h> #include <linux/pci.h> #include <linux/pfn.h> @@ -52,8 +53,6 @@ #include <asm/init.h> #include <linux/bootmem.h> -static unsigned long dma_reserve __initdata; - static int __init parse_direct_gbpages_off(char *arg) { direct_gbpages = 0; @@ -617,23 +616,7 @@ kernel_physical_mapping_init(unsigned long start, void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn, int acpi, int k8) { -#ifndef CONFIG_NO_BOOTMEM - unsigned long bootmap_size, bootmap; - - bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT; - bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size, - PAGE_SIZE); - if (bootmap == -1L) - panic("Cannot find bootmem map of size %ld\n", bootmap_size); - reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP"); - /* don't touch min_low_pfn */ - bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap >> PAGE_SHIFT, - 0, end_pfn); - e820_register_active_regions(0, start_pfn, end_pfn); - free_bootmem_with_active_regions(0, end_pfn); -#else - e820_register_active_regions(0, start_pfn, end_pfn); -#endif + memblock_x86_register_active_regions(0, start_pfn, end_pfn); } #endif @@ -843,52 +826,6 @@ void mark_rodata_ro(void) #endif -int __init reserve_bootmem_generic(unsigned long phys, unsigned long len, - int flags) -{ -#ifdef CONFIG_NUMA - int nid, next_nid; - int ret; -#endif - unsigned long pfn = phys >> PAGE_SHIFT; - - if (pfn >= max_pfn) { - /* - * This can happen with kdump kernels when accessing - * firmware tables: - */ - if (pfn < max_pfn_mapped) - return -EFAULT; - - printk(KERN_ERR "reserve_bootmem: illegal reserve %lx %lu\n", - phys, len); - return -EFAULT; - } - - /* Should check here against the e820 map to avoid double free */ -#ifdef CONFIG_NUMA - nid = phys_to_nid(phys); - next_nid = phys_to_nid(phys + len - 1); - if (nid == next_nid) - ret = reserve_bootmem_node(NODE_DATA(nid), phys, len, flags); - else - ret = reserve_bootmem(phys, len, flags); - - if (ret != 0) - return ret; - -#else - reserve_bootmem(phys, len, flags); -#endif - - if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) { - dma_reserve += len / PAGE_SIZE; - set_dma_reserve(dma_reserve); - } - - return 0; -} - int kern_addr_valid(unsigned long addr) { unsigned long above = ((long)addr) >> __VIRTUAL_MASK_SHIFT; diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 3ba6e0608c55..0369843511dc 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -362,6 +362,11 @@ static inline pte_t * __init early_ioremap_pte(unsigned long addr) return &bm_pte[pte_index(addr)]; } +bool __init is_early_ioremap_ptep(pte_t *ptep) +{ + return ptep >= &bm_pte[0] && ptep < &bm_pte[PAGE_SIZE/sizeof(pte_t)]; +} + static unsigned long slot_virt[FIX_BTMAPS_SLOTS] __initdata; void __init early_ioremap_init(void) diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 52d54bfc1ebb..804a3b6c6e14 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -11,6 +11,8 @@ #include <linux/string.h> #include <linux/module.h> #include <linux/nodemask.h> +#include <linux/memblock.h> + #include <asm/io.h> #include <linux/pci_ids.h> #include <linux/acpi.h> @@ -222,7 +224,7 @@ int __init k8_scan_nodes(void) for_each_node_mask(i, node_possible_map) { int j; - e820_register_active_regions(i, + memblock_x86_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, nodes[i].end >> PAGE_SHIFT); for (j = apicid_base; j < cores + apicid_base; j++) diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c new file mode 100644 index 000000000000..aa1169392b83 --- /dev/null +++ b/arch/x86/mm/memblock.c @@ -0,0 +1,348 @@ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/memblock.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <linux/range.h> + +/* Check for already reserved areas */ +static bool __init check_with_memblock_reserved_size(u64 *addrp, u64 *sizep, u64 align) +{ + struct memblock_region *r; + u64 addr = *addrp, last; + u64 size = *sizep; + bool changed = false; + +again: + last = addr + size; + for_each_memblock(reserved, r) { + if (last > r->base && addr < r->base) { + size = r->base - addr; + changed = true; + goto again; + } + if (last > (r->base + r->size) && addr < (r->base + r->size)) { + addr = round_up(r->base + r->size, align); + size = last - addr; + changed = true; + goto again; + } + if (last <= (r->base + r->size) && addr >= r->base) { + *sizep = 0; + return false; + } + } + if (changed) { + *addrp = addr; + *sizep = size; + } + return changed; +} + +/* + * Find next free range after start, and size is returned in *sizep + */ +u64 __init memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align) +{ + struct memblock_region *r; + + for_each_memblock(memory, r) { + u64 ei_start = r->base; + u64 ei_last = ei_start + r->size; + u64 addr; + + addr = round_up(ei_start, align); + if (addr < start) + addr = round_up(start, align); + if (addr >= ei_last) + continue; + *sizep = ei_last - addr; + while (check_with_memblock_reserved_size(&addr, sizep, align)) + ; + + if (*sizep) + return addr; + } + + return MEMBLOCK_ERROR; +} + +static __init struct range *find_range_array(int count) +{ + u64 end, size, mem; + struct range *range; + + size = sizeof(struct range) * count; + end = memblock.current_limit; + + mem = memblock_find_in_range(0, end, size, sizeof(struct range)); + if (mem == MEMBLOCK_ERROR) + panic("can not find more space for range array"); + + /* + * This range is tempoaray, so don't reserve it, it will not be + * overlapped because We will not alloccate new buffer before + * We discard this one + */ + range = __va(mem); + memset(range, 0, size); + + return range; +} + +static void __init memblock_x86_subtract_reserved(struct range *range, int az) +{ + u64 final_start, final_end; + struct memblock_region *r; + + /* Take out region array itself at first*/ + memblock_free_reserved_regions(); + + memblock_dbg("Subtract (%ld early reservations)\n", memblock.reserved.cnt); + + for_each_memblock(reserved, r) { + memblock_dbg(" [%010llx-%010llx]\n", (u64)r->base, (u64)r->base + r->size - 1); + final_start = PFN_DOWN(r->base); + final_end = PFN_UP(r->base + r->size); + if (final_start >= final_end) + continue; + subtract_range(range, az, final_start, final_end); + } + + /* Put region array back ? */ + memblock_reserve_reserved_regions(); +} + +struct count_data { + int nr; +}; + +static int __init count_work_fn(unsigned long start_pfn, + unsigned long end_pfn, void *datax) +{ + struct count_data *data = datax; + + data->nr++; + + return 0; +} + +static int __init count_early_node_map(int nodeid) +{ + struct count_data data; + + data.nr = 0; + work_with_active_regions(nodeid, count_work_fn, &data); + + return data.nr; +} + +int __init __get_free_all_memory_range(struct range **rangep, int nodeid, + unsigned long start_pfn, unsigned long end_pfn) +{ + int count; + struct range *range; + int nr_range; + + count = (memblock.reserved.cnt + count_early_node_map(nodeid)) * 2; + + range = find_range_array(count); + nr_range = 0; + + /* + * Use early_node_map[] and memblock.reserved.region to get range array + * at first + */ + nr_range = add_from_early_node_map(range, count, nr_range, nodeid); + subtract_range(range, count, 0, start_pfn); + subtract_range(range, count, end_pfn, -1ULL); + + memblock_x86_subtract_reserved(range, count); + nr_range = clean_sort_range(range, count); + + *rangep = range; + return nr_range; +} + +int __init get_free_all_memory_range(struct range **rangep, int nodeid) +{ + unsigned long end_pfn = -1UL; + +#ifdef CONFIG_X86_32 + end_pfn = max_low_pfn; +#endif + return __get_free_all_memory_range(rangep, nodeid, 0, end_pfn); +} + +static u64 __init __memblock_x86_memory_in_range(u64 addr, u64 limit, bool get_free) +{ + int i, count; + struct range *range; + int nr_range; + u64 final_start, final_end; + u64 free_size; + struct memblock_region *r; + + count = (memblock.reserved.cnt + memblock.memory.cnt) * 2; + + range = find_range_array(count); + nr_range = 0; + + addr = PFN_UP(addr); + limit = PFN_DOWN(limit); + + for_each_memblock(memory, r) { + final_start = PFN_UP(r->base); + final_end = PFN_DOWN(r->base + r->size); + if (final_start >= final_end) + continue; + if (final_start >= limit || final_end <= addr) + continue; + + nr_range = add_range(range, count, nr_range, final_start, final_end); + } + subtract_range(range, count, 0, addr); + subtract_range(range, count, limit, -1ULL); + + /* Subtract memblock.reserved.region in range ? */ + if (!get_free) + goto sort_and_count_them; + for_each_memblock(reserved, r) { + final_start = PFN_DOWN(r->base); + final_end = PFN_UP(r->base + r->size); + if (final_start >= final_end) + continue; + if (final_start >= limit || final_end <= addr) + continue; + + subtract_range(range, count, final_start, final_end); + } + +sort_and_count_them: + nr_range = clean_sort_range(range, count); + + free_size = 0; + for (i = 0; i < nr_range; i++) + free_size += range[i].end - range[i].start; + + return free_size << PAGE_SHIFT; +} + +u64 __init memblock_x86_free_memory_in_range(u64 addr, u64 limit) +{ + return __memblock_x86_memory_in_range(addr, limit, true); +} + +u64 __init memblock_x86_memory_in_range(u64 addr, u64 limit) +{ + return __memblock_x86_memory_in_range(addr, limit, false); +} + +void __init memblock_x86_reserve_range(u64 start, u64 end, char *name) +{ + if (start == end) + return; + + if (WARN_ONCE(start > end, "memblock_x86_reserve_range: wrong range [%#llx, %#llx)\n", start, end)) + return; + + memblock_dbg(" memblock_x86_reserve_range: [%#010llx-%#010llx] %16s\n", start, end - 1, name); + + memblock_reserve(start, end - start); +} + +void __init memblock_x86_free_range(u64 start, u64 end) +{ + if (start == end) + return; + + if (WARN_ONCE(start > end, "memblock_x86_free_range: wrong range [%#llx, %#llx)\n", start, end)) + return; + + memblock_dbg(" memblock_x86_free_range: [%#010llx-%#010llx]\n", start, end - 1); + + memblock_free(start, end - start); +} + +/* + * Need to call this function after memblock_x86_register_active_regions, + * so early_node_map[] is filled already. + */ +u64 __init memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align) +{ + u64 addr; + addr = find_memory_core_early(nid, size, align, start, end); + if (addr != MEMBLOCK_ERROR) + return addr; + + /* Fallback, should already have start end within node range */ + return memblock_find_in_range(start, end, size, align); +} + +/* + * Finds an active region in the address range from start_pfn to last_pfn and + * returns its range in ei_startpfn and ei_endpfn for the memblock entry. + */ +static int __init memblock_x86_find_active_region(const struct memblock_region *ei, + unsigned long start_pfn, + unsigned long last_pfn, + unsigned long *ei_startpfn, + unsigned long *ei_endpfn) +{ + u64 align = PAGE_SIZE; + + *ei_startpfn = round_up(ei->base, align) >> PAGE_SHIFT; + *ei_endpfn = round_down(ei->base + ei->size, align) >> PAGE_SHIFT; + + /* Skip map entries smaller than a page */ + if (*ei_startpfn >= *ei_endpfn) + return 0; + + /* Skip if map is outside the node */ + if (*ei_endpfn <= start_pfn || *ei_startpfn >= last_pfn) + return 0; + + /* Check for overlaps */ + if (*ei_startpfn < start_pfn) + *ei_startpfn = start_pfn; + if (*ei_endpfn > last_pfn) + *ei_endpfn = last_pfn; + + return 1; +} + +/* Walk the memblock.memory map and register active regions within a node */ +void __init memblock_x86_register_active_regions(int nid, unsigned long start_pfn, + unsigned long last_pfn) +{ + unsigned long ei_startpfn; + unsigned long ei_endpfn; + struct memblock_region *r; + + for_each_memblock(memory, r) + if (memblock_x86_find_active_region(r, start_pfn, last_pfn, + &ei_startpfn, &ei_endpfn)) + add_active_range(nid, ei_startpfn, ei_endpfn); +} + +/* + * Find the hole size (in bytes) in the memory range. + * @start: starting address of the memory range to scan + * @end: ending address of the memory range to scan + */ +u64 __init memblock_x86_hole_size(u64 start, u64 end) +{ + unsigned long start_pfn = start >> PAGE_SHIFT; + unsigned long last_pfn = end >> PAGE_SHIFT; + unsigned long ei_startpfn, ei_endpfn, ram = 0; + struct memblock_region *r; + + for_each_memblock(memory, r) + if (memblock_x86_find_active_region(r, start_pfn, last_pfn, + &ei_startpfn, &ei_endpfn)) + ram += ei_endpfn - ei_startpfn; + + return end - start - ((u64)ram << PAGE_SHIFT); +} diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c index 18d244f70205..92faf3a1c53e 100644 --- a/arch/x86/mm/memtest.c +++ b/arch/x86/mm/memtest.c @@ -6,8 +6,7 @@ #include <linux/smp.h> #include <linux/init.h> #include <linux/pfn.h> - -#include <asm/e820.h> +#include <linux/memblock.h> static u64 patterns[] __initdata = { 0, @@ -35,7 +34,7 @@ static void __init reserve_bad_mem(u64 pattern, u64 start_bad, u64 end_bad) (unsigned long long) pattern, (unsigned long long) start_bad, (unsigned long long) end_bad); - reserve_early(start_bad, end_bad, "BAD RAM"); + memblock_x86_reserve_range(start_bad, end_bad, "BAD RAM"); } static void __init memtest(u64 pattern, u64 start_phys, u64 size) @@ -74,7 +73,7 @@ static void __init do_one_pass(u64 pattern, u64 start, u64 end) u64 size = 0; while (start < end) { - start = find_e820_area_size(start, &size, 1); + start = memblock_x86_find_in_range_size(start, &size, 1); /* done ? */ if (start >= end) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 809baaaf48b1..84a3e4c9f277 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -24,6 +24,7 @@ #include <linux/mm.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/mmzone.h> #include <linux/highmem.h> #include <linux/initrd.h> @@ -120,7 +121,7 @@ int __init get_memcfg_numa_flat(void) node_start_pfn[0] = 0; node_end_pfn[0] = max_pfn; - e820_register_active_regions(0, 0, max_pfn); + memblock_x86_register_active_regions(0, 0, max_pfn); memory_present(0, 0, max_pfn); node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn); @@ -161,14 +162,14 @@ static void __init allocate_pgdat(int nid) NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid]; else { unsigned long pgdat_phys; - pgdat_phys = find_e820_area(min_low_pfn<<PAGE_SHIFT, + pgdat_phys = memblock_find_in_range(min_low_pfn<<PAGE_SHIFT, max_pfn_mapped<<PAGE_SHIFT, sizeof(pg_data_t), PAGE_SIZE); NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT)); memset(buf, 0, sizeof(buf)); sprintf(buf, "NODE_DATA %d", nid); - reserve_early(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf); + memblock_x86_reserve_range(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf); } printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n", nid, (unsigned long)NODE_DATA(nid)); @@ -291,15 +292,15 @@ static __init unsigned long calculate_numa_remap_pages(void) PTRS_PER_PTE); node_kva_target <<= PAGE_SHIFT; do { - node_kva_final = find_e820_area(node_kva_target, + node_kva_final = memblock_find_in_range(node_kva_target, ((u64)node_end_pfn[nid])<<PAGE_SHIFT, ((u64)size)<<PAGE_SHIFT, LARGE_PAGE_BYTES); node_kva_target -= LARGE_PAGE_BYTES; - } while (node_kva_final == -1ULL && + } while (node_kva_final == MEMBLOCK_ERROR && (node_kva_target>>PAGE_SHIFT) > (node_start_pfn[nid])); - if (node_kva_final == -1ULL) + if (node_kva_final == MEMBLOCK_ERROR) panic("Can not get kva ram\n"); node_remap_size[nid] = size; @@ -318,15 +319,13 @@ static __init unsigned long calculate_numa_remap_pages(void) * but we could have some hole in high memory, and it will only * check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide * to use it as free. - * So reserve_early here, hope we don't run out of that array + * So memblock_x86_reserve_range here, hope we don't run out of that array */ - reserve_early(node_kva_final, + memblock_x86_reserve_range(node_kva_final, node_kva_final+(((u64)size)<<PAGE_SHIFT), "KVA RAM"); node_remap_start_pfn[nid] = node_kva_final>>PAGE_SHIFT; - remove_active_range(nid, node_remap_start_pfn[nid], - node_remap_start_pfn[nid] + size); } printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n", reserve_pages); @@ -367,14 +366,14 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn, kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE); do { - kva_start_pfn = find_e820_area(kva_target_pfn<<PAGE_SHIFT, + kva_start_pfn = memblock_find_in_range(kva_target_pfn<<PAGE_SHIFT, max_low_pfn<<PAGE_SHIFT, kva_pages<<PAGE_SHIFT, PTRS_PER_PTE<<PAGE_SHIFT) >> PAGE_SHIFT; kva_target_pfn -= PTRS_PER_PTE; - } while (kva_start_pfn == -1UL && kva_target_pfn > min_low_pfn); + } while (kva_start_pfn == MEMBLOCK_ERROR && kva_target_pfn > min_low_pfn); - if (kva_start_pfn == -1UL) + if (kva_start_pfn == MEMBLOCK_ERROR) panic("Can not get kva space\n"); printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n", @@ -382,7 +381,7 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn, printk(KERN_INFO "max_pfn = %lx\n", max_pfn); /* avoid clash with initrd */ - reserve_early(kva_start_pfn<<PAGE_SHIFT, + memblock_x86_reserve_range(kva_start_pfn<<PAGE_SHIFT, (kva_start_pfn + kva_pages)<<PAGE_SHIFT, "KVA PG"); #ifdef CONFIG_HIGHMEM @@ -419,9 +418,6 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn, for_each_online_node(nid) { memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); NODE_DATA(nid)->node_id = nid; -#ifndef CONFIG_NO_BOOTMEM - NODE_DATA(nid)->bdata = &bootmem_node_data[nid]; -#endif } setup_bootmem_allocator(); diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 4962f1aeda6f..60f498511dd6 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -7,6 +7,7 @@ #include <linux/string.h> #include <linux/init.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/mmzone.h> #include <linux/ctype.h> #include <linux/module.h> @@ -86,16 +87,16 @@ static int __init allocate_cachealigned_memnodemap(void) addr = 0x8000; nodemap_size = roundup(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES); - nodemap_addr = find_e820_area(addr, max_pfn<<PAGE_SHIFT, + nodemap_addr = memblock_find_in_range(addr, max_pfn<<PAGE_SHIFT, nodemap_size, L1_CACHE_BYTES); - if (nodemap_addr == -1UL) { + if (nodemap_addr == MEMBLOCK_ERROR) { printk(KERN_ERR "NUMA: Unable to allocate Memory to Node hash map\n"); nodemap_addr = nodemap_size = 0; return -1; } memnodemap = phys_to_virt(nodemap_addr); - reserve_early(nodemap_addr, nodemap_addr + nodemap_size, "MEMNODEMAP"); + memblock_x86_reserve_range(nodemap_addr, nodemap_addr + nodemap_size, "MEMNODEMAP"); printk(KERN_DEBUG "NUMA: Allocated memnodemap from %lx - %lx\n", nodemap_addr, nodemap_addr + nodemap_size); @@ -171,8 +172,8 @@ static void * __init early_node_mem(int nodeid, unsigned long start, if (start < (MAX_DMA32_PFN<<PAGE_SHIFT) && end > (MAX_DMA32_PFN<<PAGE_SHIFT)) start = MAX_DMA32_PFN<<PAGE_SHIFT; - mem = find_e820_area(start, end, size, align); - if (mem != -1L) + mem = memblock_x86_find_in_range_node(nodeid, start, end, size, align); + if (mem != MEMBLOCK_ERROR) return __va(mem); /* extend the search scope */ @@ -181,8 +182,8 @@ static void * __init early_node_mem(int nodeid, unsigned long start, start = MAX_DMA32_PFN<<PAGE_SHIFT; else start = MAX_DMA_PFN<<PAGE_SHIFT; - mem = find_e820_area(start, end, size, align); - if (mem != -1L) + mem = memblock_x86_find_in_range_node(nodeid, start, end, size, align); + if (mem != MEMBLOCK_ERROR) return __va(mem); printk(KERN_ERR "Cannot find %lu bytes in node %d\n", @@ -198,10 +199,6 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) unsigned long start_pfn, last_pfn, nodedata_phys; const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE); int nid; -#ifndef CONFIG_NO_BOOTMEM - unsigned long bootmap_start, bootmap_pages, bootmap_size; - void *bootmap; -#endif if (!end) return; @@ -226,7 +223,7 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) if (node_data[nodeid] == NULL) return; nodedata_phys = __pa(node_data[nodeid]); - reserve_early(nodedata_phys, nodedata_phys + pgdat_size, "NODE_DATA"); + memblock_x86_reserve_range(nodedata_phys, nodedata_phys + pgdat_size, "NODE_DATA"); printk(KERN_INFO " NODE_DATA [%016lx - %016lx]\n", nodedata_phys, nodedata_phys + pgdat_size - 1); nid = phys_to_nid(nodedata_phys); @@ -238,47 +235,6 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) NODE_DATA(nodeid)->node_start_pfn = start_pfn; NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn; -#ifndef CONFIG_NO_BOOTMEM - NODE_DATA(nodeid)->bdata = &bootmem_node_data[nodeid]; - - /* - * Find a place for the bootmem map - * nodedata_phys could be on other nodes by alloc_bootmem, - * so need to sure bootmap_start not to be small, otherwise - * early_node_mem will get that with find_e820_area instead - * of alloc_bootmem, that could clash with reserved range - */ - bootmap_pages = bootmem_bootmap_pages(last_pfn - start_pfn); - bootmap_start = roundup(nodedata_phys + pgdat_size, PAGE_SIZE); - /* - * SMP_CACHE_BYTES could be enough, but init_bootmem_node like - * to use that to align to PAGE_SIZE - */ - bootmap = early_node_mem(nodeid, bootmap_start, end, - bootmap_pages<<PAGE_SHIFT, PAGE_SIZE); - if (bootmap == NULL) { - free_early(nodedata_phys, nodedata_phys + pgdat_size); - node_data[nodeid] = NULL; - return; - } - bootmap_start = __pa(bootmap); - reserve_early(bootmap_start, bootmap_start+(bootmap_pages<<PAGE_SHIFT), - "BOOTMAP"); - - bootmap_size = init_bootmem_node(NODE_DATA(nodeid), - bootmap_start >> PAGE_SHIFT, - start_pfn, last_pfn); - - printk(KERN_INFO " bootmap [%016lx - %016lx] pages %lx\n", - bootmap_start, bootmap_start + bootmap_size - 1, - bootmap_pages); - nid = phys_to_nid(bootmap_start); - if (nid != nodeid) - printk(KERN_INFO " bootmap(%d) on node %d\n", nodeid, nid); - - free_bootmem_with_active_regions(nodeid, end); -#endif - node_set_online(nodeid); } @@ -416,7 +372,7 @@ static int __init split_nodes_interleave(u64 addr, u64 max_addr, nr_nodes = MAX_NUMNODES; } - size = (max_addr - addr - e820_hole_size(addr, max_addr)) / nr_nodes; + size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) / nr_nodes; /* * Calculate the number of big nodes that can be allocated as a result * of consolidating the remainder. @@ -452,7 +408,7 @@ static int __init split_nodes_interleave(u64 addr, u64 max_addr, * non-reserved memory is less than the per-node size. */ while (end - physnodes[i].start - - e820_hole_size(physnodes[i].start, end) < size) { + memblock_x86_hole_size(physnodes[i].start, end) < size) { end += FAKE_NODE_MIN_SIZE; if (end > physnodes[i].end) { end = physnodes[i].end; @@ -466,7 +422,7 @@ static int __init split_nodes_interleave(u64 addr, u64 max_addr, * this one must extend to the boundary. */ if (end < dma32_end && dma32_end - end - - e820_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) + memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) end = dma32_end; /* @@ -475,7 +431,7 @@ static int __init split_nodes_interleave(u64 addr, u64 max_addr, * physical node. */ if (physnodes[i].end - end - - e820_hole_size(end, physnodes[i].end) < size) + memblock_x86_hole_size(end, physnodes[i].end) < size) end = physnodes[i].end; /* @@ -503,7 +459,7 @@ static u64 __init find_end_of_node(u64 start, u64 max_addr, u64 size) { u64 end = start + size; - while (end - start - e820_hole_size(start, end) < size) { + while (end - start - memblock_x86_hole_size(start, end) < size) { end += FAKE_NODE_MIN_SIZE; if (end > max_addr) { end = max_addr; @@ -532,7 +488,7 @@ static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size) * creates a uniform distribution of node sizes across the entire * machine (but not necessarily over physical nodes). */ - min_size = (max_addr - addr - e820_hole_size(addr, max_addr)) / + min_size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) / MAX_NUMNODES; min_size = max(min_size, FAKE_NODE_MIN_SIZE); if ((min_size & FAKE_NODE_MIN_HASH_MASK) < min_size) @@ -565,7 +521,7 @@ static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size) * this one must extend to the boundary. */ if (end < dma32_end && dma32_end - end - - e820_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) + memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) end = dma32_end; /* @@ -574,7 +530,7 @@ static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size) * physical node. */ if (physnodes[i].end - end - - e820_hole_size(end, physnodes[i].end) < size) + memblock_x86_hole_size(end, physnodes[i].end) < size) end = physnodes[i].end; /* @@ -638,7 +594,7 @@ static int __init numa_emulation(unsigned long start_pfn, */ remove_all_active_ranges(); for_each_node_mask(i, node_possible_map) { - e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, + memblock_x86_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, nodes[i].end >> PAGE_SHIFT); setup_node_bootmem(i, nodes[i].start, nodes[i].end); } @@ -691,7 +647,7 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn, node_set(0, node_possible_map); for (i = 0; i < nr_cpu_ids; i++) numa_set_node(i, 0); - e820_register_active_regions(0, start_pfn, last_pfn); + memblock_x86_register_active_regions(0, start_pfn, last_pfn); setup_node_bootmem(0, start_pfn << PAGE_SHIFT, last_pfn << PAGE_SHIFT); } @@ -703,9 +659,7 @@ unsigned long __init numa_free_all_bootmem(void) for_each_online_node(i) pages += free_all_bootmem_node(NODE_DATA(i)); -#ifdef CONFIG_NO_BOOTMEM pages += free_all_memory_core_early(MAX_NUMNODES); -#endif return pages; } diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index 9324f13492d5..a17dffd136c1 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -25,6 +25,7 @@ */ #include <linux/mm.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/mmzone.h> #include <linux/acpi.h> #include <linux/nodemask.h> @@ -264,7 +265,7 @@ int __init get_memcfg_from_srat(void) if (node_read_chunk(chunk->nid, chunk)) continue; - e820_register_active_regions(chunk->nid, chunk->start_pfn, + memblock_x86_register_active_regions(chunk->nid, chunk->start_pfn, min(chunk->end_pfn, max_pfn)); } /* for out of order entries in SRAT */ diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 9c0d0d399c30..a35cb9d8b060 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/topology.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/mm.h> #include <asm/proto.h> #include <asm/numa.h> @@ -98,15 +99,15 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) unsigned long phys; length = slit->header.length; - phys = find_e820_area(0, max_pfn_mapped<<PAGE_SHIFT, length, + phys = memblock_find_in_range(0, max_pfn_mapped<<PAGE_SHIFT, length, PAGE_SIZE); - if (phys == -1L) + if (phys == MEMBLOCK_ERROR) panic(" Can not save slit!\n"); acpi_slit = __va(phys); memcpy(acpi_slit, slit, length); - reserve_early(phys, phys + length, "ACPI SLIT"); + memblock_x86_reserve_range(phys, phys + length, "ACPI SLIT"); } /* Callback for Proximity Domain -> x2APIC mapping */ @@ -324,7 +325,7 @@ static int __init nodes_cover_memory(const struct bootnode *nodes) pxmram = 0; } - e820ram = max_pfn - (e820_hole_size(0, max_pfn<<PAGE_SHIFT)>>PAGE_SHIFT); + e820ram = max_pfn - (memblock_x86_hole_size(0, max_pfn<<PAGE_SHIFT)>>PAGE_SHIFT); /* We seem to lose 3 pages somewhere. Allow 1M of slack. */ if ((long)(e820ram - pxmram) >= (1<<(20 - PAGE_SHIFT))) { printk(KERN_ERR @@ -421,7 +422,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) } for (i = 0; i < num_node_memblks; i++) - e820_register_active_regions(memblk_nodeid[i], + memblock_x86_register_active_regions(memblk_nodeid[i], node_memblk_range[i].start >> PAGE_SHIFT, node_memblk_range[i].end >> PAGE_SHIFT); diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c index 8d17db266bbf..a011bcc0f943 100644 --- a/arch/x86/oprofile/op_model_amd.c +++ b/arch/x86/oprofile/op_model_amd.c @@ -322,29 +322,25 @@ static inline int eilvt_is_available(int offset) static inline int ibs_eilvt_valid(void) { - u64 val; int offset; + u64 val; rdmsrl(MSR_AMD64_IBSCTL, val); + offset = val & IBSCTL_LVT_OFFSET_MASK; + if (!(val & IBSCTL_LVT_OFFSET_VALID)) { - pr_err(FW_BUG "cpu %d, invalid IBS " - "interrupt offset %d (MSR%08X=0x%016llx)", - smp_processor_id(), offset, - MSR_AMD64_IBSCTL, val); + pr_err(FW_BUG "cpu %d, invalid IBS interrupt offset %d (MSR%08X=0x%016llx)\n", + smp_processor_id(), offset, MSR_AMD64_IBSCTL, val); return 0; } - offset = val & IBSCTL_LVT_OFFSET_MASK; - - if (eilvt_is_available(offset)) - return !0; - - pr_err(FW_BUG "cpu %d, IBS interrupt offset %d " - "not available (MSR%08X=0x%016llx)", - smp_processor_id(), offset, - MSR_AMD64_IBSCTL, val); + if (!eilvt_is_available(offset)) { + pr_err(FW_BUG "cpu %d, IBS interrupt offset %d not available (MSR%08X=0x%016llx)\n", + smp_processor_id(), offset, MSR_AMD64_IBSCTL, val); + return 0; + } - return 0; + return 1; } static inline int get_ibs_offset(void) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 7d46c8441418..63b83ceebd1a 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -30,6 +30,7 @@ #include <linux/console.h> #include <linux/pci.h> #include <linux/gfp.h> +#include <linux/memblock.h> #include <xen/xen.h> #include <xen/interface/xen.h> @@ -1183,6 +1184,8 @@ asmlinkage void __init xen_start_kernel(void) local_irq_disable(); early_boot_irqs_off(); + memblock_init(); + xen_raw_console_write("mapping kernel into physical memory\n"); pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages); diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index b2363fcbcd0f..f72d18c69221 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -45,6 +45,7 @@ #include <linux/vmalloc.h> #include <linux/module.h> #include <linux/gfp.h> +#include <linux/memblock.h> #include <asm/pgtable.h> #include <asm/tlbflush.h> @@ -55,6 +56,7 @@ #include <asm/e820.h> #include <asm/linkage.h> #include <asm/page.h> +#include <asm/init.h> #include <asm/xen/hypercall.h> #include <asm/xen/hypervisor.h> @@ -359,7 +361,8 @@ void make_lowmem_page_readonly(void *vaddr) unsigned int level; pte = lookup_address(address, &level); - BUG_ON(pte == NULL); + if (pte == NULL) + return; /* vaddr missing */ ptev = pte_wrprotect(*pte); @@ -374,7 +377,8 @@ void make_lowmem_page_readwrite(void *vaddr) unsigned int level; pte = lookup_address(address, &level); - BUG_ON(pte == NULL); + if (pte == NULL) + return; /* vaddr missing */ ptev = pte_mkwrite(*pte); @@ -1508,13 +1512,25 @@ static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd) #endif } -#ifdef CONFIG_X86_32 static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte) { + unsigned long pfn = pte_pfn(pte); + +#ifdef CONFIG_X86_32 /* If there's an existing pte, then don't allow _PAGE_RW to be set */ if (pte_val_ma(*ptep) & _PAGE_PRESENT) pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) & pte_val_ma(pte)); +#endif + + /* + * If the new pfn is within the range of the newly allocated + * kernel pagetable, and it isn't being mapped into an + * early_ioremap fixmap slot, make sure it is RO. + */ + if (!is_early_ioremap_ptep(ptep) && + pfn >= e820_table_start && pfn < e820_table_end) + pte = pte_wrprotect(pte); return pte; } @@ -1527,7 +1543,6 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte) xen_set_pte(ptep, pte); } -#endif static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn) { @@ -1814,7 +1829,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, __xen_write_cr3(true, __pa(pgd)); xen_mc_issue(PARAVIRT_LAZY_CPU); - reserve_early(__pa(xen_start_info->pt_base), + memblock_x86_reserve_range(__pa(xen_start_info->pt_base), __pa(xen_start_info->pt_base + xen_start_info->nr_pt_frames * PAGE_SIZE), "XEN PAGETABLES"); @@ -1852,7 +1867,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir))); - reserve_early(__pa(xen_start_info->pt_base), + memblock_x86_reserve_range(__pa(xen_start_info->pt_base), __pa(xen_start_info->pt_base + xen_start_info->nr_pt_frames * PAGE_SIZE), "XEN PAGETABLES"); @@ -1971,11 +1986,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .alloc_pmd = xen_alloc_pmd_init, .release_pmd = xen_release_pmd_init, -#ifdef CONFIG_X86_64 - .set_pte = xen_set_pte, -#else .set_pte = xen_set_pte_init, -#endif .set_pte_at = xen_set_pte_at, .set_pmd = xen_set_pmd_hyper, diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c index a013ec9d0c54..22471001b74c 100644 --- a/arch/x86/xen/pci-swiotlb-xen.c +++ b/arch/x86/xen/pci-swiotlb-xen.c @@ -5,6 +5,7 @@ #include <asm/xen/hypervisor.h> #include <xen/xen.h> +#include <asm/iommu_table.h> int xen_swiotlb __read_mostly; @@ -56,3 +57,7 @@ void __init pci_xen_swiotlb_init(void) dma_ops = &xen_swiotlb_dma_ops; } } +IOMMU_INIT_FINISH(pci_xen_swiotlb_detect, + 0, + pci_xen_swiotlb_init, + 0); diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 328b00305426..9729c903404b 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -8,6 +8,7 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/pm.h> +#include <linux/memblock.h> #include <asm/elf.h> #include <asm/vdso.h> @@ -129,7 +130,7 @@ char * __init xen_memory_setup(void) * - xen_start_info * See comment above "struct start_info" in <xen/interface/xen.h> */ - reserve_early(__pa(xen_start_info->mfn_list), + memblock_x86_reserve_range(__pa(xen_start_info->mfn_list), __pa(xen_start_info->pt_base), "XEN START INFO"); diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c index e0500646585d..23e061b9327b 100644 --- a/arch/x86/xen/spinlock.c +++ b/arch/x86/xen/spinlock.c @@ -224,7 +224,7 @@ static noinline int xen_spin_lock_slow(struct arch_spinlock *lock, bool irq_enab goto out; } - flags = __raw_local_save_flags(); + flags = arch_local_save_flags(); if (irq_enable) { ADD_STATS(taken_slow_irqenable, 1); raw_local_irq_enable(); diff --git a/arch/xtensa/include/asm/irqflags.h b/arch/xtensa/include/asm/irqflags.h new file mode 100644 index 000000000000..dae9a8bdcb17 --- /dev/null +++ b/arch/xtensa/include/asm/irqflags.h @@ -0,0 +1,58 @@ +/* + * Xtensa IRQ flags handling functions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_IRQFLAGS_H +#define _XTENSA_IRQFLAGS_H + +#include <linux/types.h> + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + asm volatile("rsr %0,"__stringify(PS) : "=a" (flags)); + return flags; +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + asm volatile("rsil %0, "__stringify(LOCKLEVEL) + : "=a" (flags) :: "memory"); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ + arch_local_irq_save(); +} + +static inline void arch_local_irq_enable(void) +{ + unsigned long flags; + asm volatile("rsil %0, 0" : "=a" (flags) :: "memory"); +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile("wsr %0, "__stringify(PS)" ; rsync" + :: "a" (flags) : "memory"); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return (flags & 0xf) != 0; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#endif /* _XTENSA_IRQFLAGS_H */ diff --git a/arch/xtensa/include/asm/system.h b/arch/xtensa/include/asm/system.h index 62b1e8f3c13c..1e7e09ab6cd7 100644 --- a/arch/xtensa/include/asm/system.h +++ b/arch/xtensa/include/asm/system.h @@ -12,41 +12,10 @@ #define _XTENSA_SYSTEM_H #include <linux/stringify.h> +#include <linux/irqflags.h> #include <asm/processor.h> -/* interrupt control */ - -#define local_save_flags(x) \ - __asm__ __volatile__ ("rsr %0,"__stringify(PS) : "=a" (x)); -#define local_irq_restore(x) do { \ - __asm__ __volatile__ ("wsr %0, "__stringify(PS)" ; rsync" \ - :: "a" (x) : "memory"); } while(0); -#define local_irq_save(x) do { \ - __asm__ __volatile__ ("rsil %0, "__stringify(LOCKLEVEL) \ - : "=a" (x) :: "memory");} while(0); - -static inline void local_irq_disable(void) -{ - unsigned long flags; - __asm__ __volatile__ ("rsil %0, "__stringify(LOCKLEVEL) - : "=a" (flags) :: "memory"); -} -static inline void local_irq_enable(void) -{ - unsigned long flags; - __asm__ __volatile__ ("rsil %0, 0" : "=a" (flags) :: "memory"); - -} - -static inline int irqs_disabled(void) -{ - unsigned long flags; - local_save_flags(flags); - return flags & 0xf; -} - - #define smp_read_barrier_depends() do { } while(0) #define read_barrier_depends() do { } while(0) diff --git a/crypto/des_generic.c b/crypto/des_generic.c index 249f903cc453..873818d48e86 100644 --- a/crypto/des_generic.c +++ b/crypto/des_generic.c @@ -614,7 +614,7 @@ static const u32 S8[64] = { #define T3(x) pt[2 * (x) + 2] #define T4(x) pt[2 * (x) + 3] -#define PC2(a, b, c, d) (T4(d) | T3(c) | T2(b) | T1(a)) +#define DES_PC2(a, b, c, d) (T4(d) | T3(c) | T2(b) | T1(a)) /* * Encryption key expansion @@ -639,22 +639,22 @@ unsigned long des_ekey(u32 *pe, const u8 *k) b = k[6]; b &= 0x0e; b <<= 4; b |= k[2] & 0x1e; b = pc1[b]; a = k[7]; a &= 0x0e; a <<= 4; a |= k[3] & 0x1e; a = pc1[a]; - pe[15 * 2 + 0] = PC2(a, b, c, d); d = rs[d]; - pe[14 * 2 + 0] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[13 * 2 + 0] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[12 * 2 + 0] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[11 * 2 + 0] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[10 * 2 + 0] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[ 9 * 2 + 0] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[ 8 * 2 + 0] = PC2(d, a, b, c); c = rs[c]; - pe[ 7 * 2 + 0] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[ 6 * 2 + 0] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[ 5 * 2 + 0] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[ 4 * 2 + 0] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[ 3 * 2 + 0] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[ 2 * 2 + 0] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[ 1 * 2 + 0] = PC2(c, d, a, b); b = rs[b]; - pe[ 0 * 2 + 0] = PC2(b, c, d, a); + pe[15 * 2 + 0] = DES_PC2(a, b, c, d); d = rs[d]; + pe[14 * 2 + 0] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[13 * 2 + 0] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[12 * 2 + 0] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[11 * 2 + 0] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[10 * 2 + 0] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[ 9 * 2 + 0] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[ 8 * 2 + 0] = DES_PC2(d, a, b, c); c = rs[c]; + pe[ 7 * 2 + 0] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[ 6 * 2 + 0] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[ 5 * 2 + 0] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[ 4 * 2 + 0] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[ 3 * 2 + 0] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[ 2 * 2 + 0] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[ 1 * 2 + 0] = DES_PC2(c, d, a, b); b = rs[b]; + pe[ 0 * 2 + 0] = DES_PC2(b, c, d, a); /* Check if first half is weak */ w = (a ^ c) | (b ^ d) | (rs[a] ^ c) | (b ^ rs[d]); @@ -670,22 +670,22 @@ unsigned long des_ekey(u32 *pe, const u8 *k) /* Check if second half is weak */ w |= (a ^ c) | (b ^ d) | (rs[a] ^ c) | (b ^ rs[d]); - pe[15 * 2 + 1] = PC2(a, b, c, d); d = rs[d]; - pe[14 * 2 + 1] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[13 * 2 + 1] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[12 * 2 + 1] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[11 * 2 + 1] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[10 * 2 + 1] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[ 9 * 2 + 1] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[ 8 * 2 + 1] = PC2(d, a, b, c); c = rs[c]; - pe[ 7 * 2 + 1] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[ 6 * 2 + 1] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[ 5 * 2 + 1] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[ 4 * 2 + 1] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[ 3 * 2 + 1] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[ 2 * 2 + 1] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[ 1 * 2 + 1] = PC2(c, d, a, b); b = rs[b]; - pe[ 0 * 2 + 1] = PC2(b, c, d, a); + pe[15 * 2 + 1] = DES_PC2(a, b, c, d); d = rs[d]; + pe[14 * 2 + 1] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[13 * 2 + 1] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[12 * 2 + 1] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[11 * 2 + 1] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[10 * 2 + 1] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[ 9 * 2 + 1] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[ 8 * 2 + 1] = DES_PC2(d, a, b, c); c = rs[c]; + pe[ 7 * 2 + 1] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[ 6 * 2 + 1] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[ 5 * 2 + 1] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[ 4 * 2 + 1] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[ 3 * 2 + 1] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[ 2 * 2 + 1] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[ 1 * 2 + 1] = DES_PC2(c, d, a, b); b = rs[b]; + pe[ 0 * 2 + 1] = DES_PC2(b, c, d, a); /* Fixup: 2413 5768 -> 1357 2468 */ for (d = 0; d < 16; ++d) { @@ -722,22 +722,22 @@ static void dkey(u32 *pe, const u8 *k) b = k[6]; b &= 0x0e; b <<= 4; b |= k[2] & 0x1e; b = pc1[b]; a = k[7]; a &= 0x0e; a <<= 4; a |= k[3] & 0x1e; a = pc1[a]; - pe[ 0 * 2] = PC2(a, b, c, d); d = rs[d]; - pe[ 1 * 2] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[ 2 * 2] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[ 3 * 2] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[ 4 * 2] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[ 5 * 2] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[ 6 * 2] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[ 7 * 2] = PC2(d, a, b, c); c = rs[c]; - pe[ 8 * 2] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[ 9 * 2] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[10 * 2] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[11 * 2] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[12 * 2] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[13 * 2] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[14 * 2] = PC2(c, d, a, b); b = rs[b]; - pe[15 * 2] = PC2(b, c, d, a); + pe[ 0 * 2] = DES_PC2(a, b, c, d); d = rs[d]; + pe[ 1 * 2] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[ 2 * 2] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[ 3 * 2] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[ 4 * 2] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[ 5 * 2] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[ 6 * 2] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[ 7 * 2] = DES_PC2(d, a, b, c); c = rs[c]; + pe[ 8 * 2] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[ 9 * 2] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[10 * 2] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[11 * 2] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[12 * 2] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[13 * 2] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[14 * 2] = DES_PC2(c, d, a, b); b = rs[b]; + pe[15 * 2] = DES_PC2(b, c, d, a); /* Skip to next table set */ pt += 512; @@ -747,22 +747,22 @@ static void dkey(u32 *pe, const u8 *k) b = k[2]; b &= 0xe0; b >>= 4; b |= k[6] & 0xf0; b = pc1[b + 1]; a = k[3]; a &= 0xe0; a >>= 4; a |= k[7] & 0xf0; a = pc1[a + 1]; - pe[ 0 * 2 + 1] = PC2(a, b, c, d); d = rs[d]; - pe[ 1 * 2 + 1] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[ 2 * 2 + 1] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[ 3 * 2 + 1] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[ 4 * 2 + 1] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[ 5 * 2 + 1] = PC2(d, a, b, c); c = rs[c]; b = rs[b]; - pe[ 6 * 2 + 1] = PC2(b, c, d, a); a = rs[a]; d = rs[d]; - pe[ 7 * 2 + 1] = PC2(d, a, b, c); c = rs[c]; - pe[ 8 * 2 + 1] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[ 9 * 2 + 1] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[10 * 2 + 1] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[11 * 2 + 1] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[12 * 2 + 1] = PC2(c, d, a, b); b = rs[b]; a = rs[a]; - pe[13 * 2 + 1] = PC2(a, b, c, d); d = rs[d]; c = rs[c]; - pe[14 * 2 + 1] = PC2(c, d, a, b); b = rs[b]; - pe[15 * 2 + 1] = PC2(b, c, d, a); + pe[ 0 * 2 + 1] = DES_PC2(a, b, c, d); d = rs[d]; + pe[ 1 * 2 + 1] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[ 2 * 2 + 1] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[ 3 * 2 + 1] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[ 4 * 2 + 1] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[ 5 * 2 + 1] = DES_PC2(d, a, b, c); c = rs[c]; b = rs[b]; + pe[ 6 * 2 + 1] = DES_PC2(b, c, d, a); a = rs[a]; d = rs[d]; + pe[ 7 * 2 + 1] = DES_PC2(d, a, b, c); c = rs[c]; + pe[ 8 * 2 + 1] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[ 9 * 2 + 1] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[10 * 2 + 1] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[11 * 2 + 1] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[12 * 2 + 1] = DES_PC2(c, d, a, b); b = rs[b]; a = rs[a]; + pe[13 * 2 + 1] = DES_PC2(a, b, c, d); d = rs[d]; c = rs[c]; + pe[14 * 2 + 1] = DES_PC2(c, d, a, b); b = rs[b]; + pe[15 * 2 + 1] = DES_PC2(b, c, d, a); /* Fixup: 2413 5768 -> 1357 2468 */ for (d = 0; d < 16; ++d) { diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index d31590e7011b..2737b9752205 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -298,7 +298,7 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) amba_put_disable_pclk(dev); - if (cid == 0xb105f00d) + if (cid == AMBA_CID) dev->periphid = pid; if (!dev->periphid) diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index d5df04a395ca..c501af5b12b9 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -99,7 +99,7 @@ obj-$(CONFIG_ATA_GENERIC) += ata_generic.o # Should be last libata driver obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o -libata-objs := libata-core.o libata-scsi.o libata-eh.o +libata-y := libata-core.o libata-scsi.o libata-eh.o libata-transport.o libata-$(CONFIG_ATA_SFF) += libata-sff.o libata-$(CONFIG_SATA_PMP) += libata-pmp.o libata-$(CONFIG_ATA_ACPI) += libata-acpi.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 99d0e5a51148..328826381a2d 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1208,9 +1208,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ata_port_pbar_desc(ap, AHCI_PCI_BAR, 0x100 + ap->port_no * 0x80, "port"); - /* set initial link pm policy */ - ap->pm_policy = NOT_AVAILABLE; - /* set enclosure management message type */ if (ap->flags & ATA_FLAG_EM) ap->em_message_type = hpriv->em_msg_type; diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index e5fdeebf9ef0..329cbbb91284 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -72,6 +72,7 @@ enum { AHCI_CMD_RESET = (1 << 8), AHCI_CMD_CLR_BUSY = (1 << 10), + RX_FIS_PIO_SETUP = 0x20, /* offset of PIO Setup FIS data */ RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ RX_FIS_SDB = 0x58, /* offset of SDB FIS data */ RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ @@ -201,7 +202,6 @@ enum { AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */ AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ - AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ @@ -216,7 +216,7 @@ enum { AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_ACPI_SATA | ATA_FLAG_AN | - ATA_FLAG_IPM, + ATA_FLAG_LPM, ICH_MAP = 0x90, /* ICH MAP register */ diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 84b643270e7a..6fef1fa75c54 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -129,9 +129,6 @@ static int __init ahci_probe(struct platform_device *pdev) ata_port_desc(ap, "mmio %pR", mem); ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); - /* set initial link pm policy */ - ap->pm_policy = NOT_AVAILABLE; - /* set enclosure management message type */ if (ap->flags & ATA_FLAG_EM) ap->em_message_type = hpriv->em_msg_type; diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index cc5f7726bde7..6981f7680a00 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -35,6 +35,7 @@ enum { ATA_GEN_CLASS_MATCH = (1 << 0), ATA_GEN_FORCE_DMA = (1 << 1), + ATA_GEN_INTEL_IDER = (1 << 2), }; /** @@ -109,6 +110,49 @@ static struct ata_port_operations generic_port_ops = { static int all_generic_ide; /* Set to claim all devices */ /** + * is_intel_ider - identify intel IDE-R devices + * @dev: PCI device + * + * Distinguish Intel IDE-R controller devices from other Intel IDE + * devices. IDE-R devices have no timing registers and are in + * most respects virtual. They should be driven by the ata_generic + * driver. + * + * IDE-R devices have PCI offset 0xF8.L as zero, later Intel ATA has + * it non zero. All Intel ATA has 0x40 writable (timing), but it is + * not writable on IDE-R devices (this is guaranteed). + */ + +static int is_intel_ider(struct pci_dev *dev) +{ + /* For Intel IDE the value at 0xF8 is only zero on IDE-R + interfaces */ + u32 r; + u16 t; + + /* Check the manufacturing ID, it will be zero for IDE-R */ + pci_read_config_dword(dev, 0xF8, &r); + /* Not IDE-R: punt so that ata_(old)piix gets it */ + if (r != 0) + return 0; + /* 0xF8 will also be zero on some early Intel IDE devices + but they will have a sane timing register */ + pci_read_config_word(dev, 0x40, &t); + if (t != 0) + return 0; + /* Finally check if the timing register is writable so that + we eliminate any early devices hot-docked in a docking + station */ + pci_write_config_word(dev, 0x40, 1); + pci_read_config_word(dev, 0x40, &t); + if (t) { + pci_write_config_word(dev, 0x40, 0); + return 0; + } + return 1; +} + +/** * ata_generic_init - attach generic IDE * @dev: PCI device found * @id: match entry @@ -134,6 +178,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0) return -ENODEV; + if (id->driver_data & ATA_GEN_INTEL_IDER) + if (!is_intel_ider(dev)) + return -ENODEV; + /* Devices that need care */ if (dev->vendor == PCI_VENDOR_ID_UMC && dev->device == PCI_DEVICE_ID_UMC_UM8886A && @@ -186,7 +234,11 @@ static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), }, -#endif +#endif + /* Intel, IDE class device */ + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, + .driver_data = ATA_GEN_INTEL_IDER }, /* Must come last. If you add entries adjust this table appropriately */ { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL), .driver_data = ATA_GEN_CLASS_MATCH }, diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index d712675d0a96..6cb14ca8ee85 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -158,7 +158,6 @@ struct piix_map_db { struct piix_host_priv { const int *map; u32 saved_iocfg; - spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */ void __iomem *sidpr; }; @@ -175,6 +174,8 @@ static int piix_sidpr_scr_read(struct ata_link *link, unsigned int reg, u32 *val); static int piix_sidpr_scr_write(struct ata_link *link, unsigned int reg, u32 val); +static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); static bool piix_irq_check(struct ata_port *ap); #ifdef CONFIG_PM static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); @@ -209,6 +210,8 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x248A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* Intel ICH3 (E7500/1) UDMA 100 */ { 0x8086, 0x248B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH4-L */ + { 0x8086, 0x24C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* Intel ICH4 (i845GV, i845E, i852, i855) UDMA 100 */ { 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, { 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, @@ -348,11 +351,22 @@ static struct ata_port_operations ich_pata_ops = { .set_dmamode = ich_set_dmamode, }; +static struct device_attribute *piix_sidpr_shost_attrs[] = { + &dev_attr_link_power_management_policy, + NULL +}; + +static struct scsi_host_template piix_sidpr_sht = { + ATA_BMDMA_SHT(DRV_NAME), + .shost_attrs = piix_sidpr_shost_attrs, +}; + static struct ata_port_operations piix_sidpr_sata_ops = { .inherits = &piix_sata_ops, .hardreset = sata_std_hardreset, .scr_read = piix_sidpr_scr_read, .scr_write = piix_sidpr_scr_write, + .set_lpm = piix_sidpr_set_lpm, }; static const struct piix_map_db ich5_map_db = { @@ -956,15 +970,12 @@ static int piix_sidpr_scr_read(struct ata_link *link, unsigned int reg, u32 *val) { struct piix_host_priv *hpriv = link->ap->host->private_data; - unsigned long flags; if (reg >= ARRAY_SIZE(piix_sidx_map)) return -EINVAL; - spin_lock_irqsave(&hpriv->sidpr_lock, flags); piix_sidpr_sel(link, reg); *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA); - spin_unlock_irqrestore(&hpriv->sidpr_lock, flags); return 0; } @@ -972,18 +983,21 @@ static int piix_sidpr_scr_write(struct ata_link *link, unsigned int reg, u32 val) { struct piix_host_priv *hpriv = link->ap->host->private_data; - unsigned long flags; if (reg >= ARRAY_SIZE(piix_sidx_map)) return -EINVAL; - spin_lock_irqsave(&hpriv->sidpr_lock, flags); piix_sidpr_sel(link, reg); iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA); - spin_unlock_irqrestore(&hpriv->sidpr_lock, flags); return 0; } +static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints) +{ + return sata_link_scr_lpm(link, policy, false); +} + static bool piix_irq_check(struct ata_port *ap) { if (unlikely(!ap->ioaddr.bmdma_addr)) @@ -1543,6 +1557,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, struct device *dev = &pdev->dev; struct ata_port_info port_info[2]; const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] }; + struct scsi_host_template *sht = &piix_sht; unsigned long port_flags; struct ata_host *host; struct piix_host_priv *hpriv; @@ -1577,7 +1592,6 @@ static int __devinit piix_init_one(struct pci_dev *pdev, hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; - spin_lock_init(&hpriv->sidpr_lock); /* Save IOCFG, this will be used for cable detection, quirk * detection and restoration on detach. This is necessary @@ -1612,6 +1626,8 @@ static int __devinit piix_init_one(struct pci_dev *pdev, rc = piix_init_sidpr(host); if (rc) return rc; + if (host->ports[0]->ops == &piix_sidpr_sata_ops) + sht = &piix_sidpr_sht; } /* apply IOCFG bit18 quirk */ @@ -1638,7 +1654,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, host->flags |= ATA_HOST_PARALLEL_SCAN; pci_set_master(pdev); - return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &piix_sht); + return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); } static void piix_remove_one(struct pci_dev *pdev) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 8eea309ea212..ebc08d65b3dd 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -56,9 +56,8 @@ MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip) module_param_named(ignore_sss, ahci_ignore_sss, int, 0444); MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)"); -static int ahci_enable_alpm(struct ata_port *ap, - enum link_pm policy); -static void ahci_disable_alpm(struct ata_port *ap); +static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); static ssize_t ahci_led_show(struct ata_port *ap, char *buf); static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, size_t size); @@ -164,8 +163,7 @@ struct ata_port_operations ahci_ops = { .pmp_attach = ahci_pmp_attach, .pmp_detach = ahci_pmp_detach, - .enable_pm = ahci_enable_alpm, - .disable_pm = ahci_disable_alpm, + .set_lpm = ahci_set_lpm, .em_show = ahci_led_show, .em_store = ahci_led_store, .sw_activity_show = ahci_activity_show, @@ -569,7 +567,7 @@ int ahci_stop_engine(struct ata_port *ap) writel(tmp, port_mmio + PORT_CMD); /* wait for engine to stop. This could be as long as 500 msec */ - tmp = ata_wait_register(port_mmio + PORT_CMD, + tmp = ata_wait_register(ap, port_mmio + PORT_CMD, PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); if (tmp & PORT_CMD_LIST_ON) return -EIO; @@ -616,7 +614,7 @@ static int ahci_stop_fis_rx(struct ata_port *ap) writel(tmp, port_mmio + PORT_CMD); /* wait for completion, spec says 500ms, give it 1000 */ - tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, + tmp = ata_wait_register(ap, port_mmio + PORT_CMD, PORT_CMD_FIS_ON, PORT_CMD_FIS_ON, 10, 1000); if (tmp & PORT_CMD_FIS_ON) return -EBUSY; @@ -642,127 +640,56 @@ static void ahci_power_up(struct ata_port *ap) writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); } -static void ahci_disable_alpm(struct ata_port *ap) +static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned int hints) { + struct ata_port *ap = link->ap; struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; struct ahci_port_priv *pp = ap->private_data; - - /* IPM bits should be disabled by libata-core */ - /* get the existing command bits */ - cmd = readl(port_mmio + PORT_CMD); - - /* disable ALPM and ASP */ - cmd &= ~PORT_CMD_ASP; - cmd &= ~PORT_CMD_ALPE; - - /* force the interface back to active */ - cmd |= PORT_CMD_ICC_ACTIVE; - - /* write out new cmd value */ - writel(cmd, port_mmio + PORT_CMD); - cmd = readl(port_mmio + PORT_CMD); - - /* wait 10ms to be sure we've come out of any low power state */ - msleep(10); - - /* clear out any PhyRdy stuff from interrupt status */ - writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT); - - /* go ahead and clean out PhyRdy Change from Serror too */ - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); - - /* - * Clear flag to indicate that we should ignore all PhyRdy - * state changes - */ - hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG; - - /* - * Enable interrupts on Phy Ready. - */ - pp->intr_mask |= PORT_IRQ_PHYRDY; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); - - /* - * don't change the link pm policy - we can be called - * just to turn of link pm temporarily - */ -} - -static int ahci_enable_alpm(struct ata_port *ap, - enum link_pm policy) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; - struct ahci_port_priv *pp = ap->private_data; - u32 asp; - /* Make sure the host is capable of link power management */ - if (!(hpriv->cap & HOST_CAP_ALPM)) - return -EINVAL; - - switch (policy) { - case MAX_PERFORMANCE: - case NOT_AVAILABLE: + if (policy != ATA_LPM_MAX_POWER) { /* - * if we came here with NOT_AVAILABLE, - * it just means this is the first time we - * have tried to enable - default to max performance, - * and let the user go to lower power modes on request. + * Disable interrupts on Phy Ready. This keeps us from + * getting woken up due to spurious phy ready + * interrupts. */ - ahci_disable_alpm(ap); - return 0; - case MIN_POWER: - /* configure HBA to enter SLUMBER */ - asp = PORT_CMD_ASP; - break; - case MEDIUM_POWER: - /* configure HBA to enter PARTIAL */ - asp = 0; - break; - default: - return -EINVAL; + pp->intr_mask &= ~PORT_IRQ_PHYRDY; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + + sata_link_scr_lpm(link, policy, false); } - /* - * Disable interrupts on Phy Ready. This keeps us from - * getting woken up due to spurious phy ready interrupts - * TBD - Hot plug should be done via polling now, is - * that even supported? - */ - pp->intr_mask &= ~PORT_IRQ_PHYRDY; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + if (hpriv->cap & HOST_CAP_ALPM) { + u32 cmd = readl(port_mmio + PORT_CMD); - /* - * Set a flag to indicate that we should ignore all PhyRdy - * state changes since these can happen now whenever we - * change link state - */ - hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG; + if (policy == ATA_LPM_MAX_POWER || !(hints & ATA_LPM_HIPM)) { + cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE); + cmd |= PORT_CMD_ICC_ACTIVE; - /* get the existing command bits */ - cmd = readl(port_mmio + PORT_CMD); + writel(cmd, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); - /* - * Set ASP based on Policy - */ - cmd |= asp; + /* wait 10ms to be sure we've come out of LPM state */ + ata_msleep(ap, 10); + } else { + cmd |= PORT_CMD_ALPE; + if (policy == ATA_LPM_MIN_POWER) + cmd |= PORT_CMD_ASP; - /* - * Setting this bit will instruct the HBA to aggressively - * enter a lower power link state when it's appropriate and - * based on the value set above for ASP - */ - cmd |= PORT_CMD_ALPE; + /* write out new cmd value */ + writel(cmd, port_mmio + PORT_CMD); + } + } - /* write out new cmd value */ - writel(cmd, port_mmio + PORT_CMD); - cmd = readl(port_mmio + PORT_CMD); + if (policy == ATA_LPM_MAX_POWER) { + sata_link_scr_lpm(link, policy, false); + + /* turn PHYRDY IRQ back on */ + pp->intr_mask |= PORT_IRQ_PHYRDY; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + } - /* IPM bits should be set by libata-core */ return 0; } @@ -813,7 +740,7 @@ static void ahci_start_port(struct ata_port *ap) emp->led_state, 4); if (rc == -EBUSY) - msleep(1); + ata_msleep(ap, 1); else break; } @@ -872,7 +799,7 @@ int ahci_reset_controller(struct ata_host *host) * reset must complete within 1 second, or * the hardware should be considered fried. */ - tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET, + tmp = ata_wait_register(NULL, mmio + HOST_CTL, HOST_RESET, HOST_RESET, 10, 1000); if (tmp & HOST_RESET) { @@ -1252,7 +1179,7 @@ int ahci_kick_engine(struct ata_port *ap) writel(tmp, port_mmio + PORT_CMD); rc = 0; - tmp = ata_wait_register(port_mmio + PORT_CMD, + tmp = ata_wait_register(ap, port_mmio + PORT_CMD, PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); if (tmp & PORT_CMD_CLO) rc = -EIO; @@ -1282,8 +1209,8 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, writel(1, port_mmio + PORT_CMD_ISSUE); if (timeout_msec) { - tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, - 1, timeout_msec); + tmp = ata_wait_register(ap, port_mmio + PORT_CMD_ISSUE, + 0x1, 0x1, 1, timeout_msec); if (tmp & 0x1) { ahci_kick_engine(ap); return -EBUSY; @@ -1330,7 +1257,7 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class, } /* spec says at least 5us, but be generous and sleep for 1ms */ - msleep(1); + ata_msleep(ap, 1); /* issue the second D2H Register FIS */ tf.ctl &= ~ATA_SRST; @@ -1660,15 +1587,10 @@ static void ahci_port_intr(struct ata_port *ap) if (unlikely(resetting)) status &= ~PORT_IRQ_BAD_PMP; - /* If we are getting PhyRdy, this is - * just a power state change, we should - * clear out this, plus the PhyRdy/Comm - * Wake bits from Serror - */ - if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) && - (status & PORT_IRQ_PHYRDY)) { + /* if LPM is enabled, PHYRDY doesn't mean anything */ + if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) { status &= ~PORT_IRQ_PHYRDY; - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); + ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG); } if (unlikely(status & PORT_IRQ_ERROR)) { @@ -1830,12 +1752,24 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc) { struct ahci_port_priv *pp = qc->ap->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + u8 *rx_fis = pp->rx_fis; if (pp->fbs_enabled) - d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ; + rx_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ; + + /* + * After a successful execution of an ATA PIO data-in command, + * the device doesn't send D2H Reg FIS to update the TF and + * the host should take TF and E_Status from the preceding PIO + * Setup FIS. + */ + if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE && + !(qc->flags & ATA_QCFLAG_FAILED)) { + ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf); + qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15]; + } else + ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf); - ata_tf_from_fis(d2h_fis, &qc->result_tf); return true; } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 932eaee50245..7f77c67d267c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -68,7 +68,7 @@ #include <linux/ratelimit.h> #include "libata.h" - +#include "libata-transport.h" /* debounce timing parameters in msecs { interval, duration, timeout } */ const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; @@ -91,8 +91,6 @@ const struct ata_port_operations sata_port_ops = { static unsigned int ata_dev_init_params(struct ata_device *dev, u16 heads, u16 sectors); static unsigned int ata_dev_set_xfermode(struct ata_device *dev); -static unsigned int ata_dev_set_feature(struct ata_device *dev, - u8 enable, u8 feature); static void ata_dev_xfermask(struct ata_device *dev); static unsigned long ata_dev_blacklisted(const struct ata_device *dev); @@ -1017,7 +1015,7 @@ const char *ata_mode_string(unsigned long xfer_mask) return "<n/a>"; } -static const char *sata_spd_string(unsigned int spd) +const char *sata_spd_string(unsigned int spd) { static const char * const spd_str[] = { "1.5 Gbps", @@ -1030,182 +1028,6 @@ static const char *sata_spd_string(unsigned int spd) return spd_str[spd - 1]; } -static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy) -{ - struct ata_link *link = dev->link; - struct ata_port *ap = link->ap; - u32 scontrol; - unsigned int err_mask; - int rc; - - /* - * disallow DIPM for drivers which haven't set - * ATA_FLAG_IPM. This is because when DIPM is enabled, - * phy ready will be set in the interrupt status on - * state changes, which will cause some drivers to - * think there are errors - additionally drivers will - * need to disable hot plug. - */ - if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) { - ap->pm_policy = NOT_AVAILABLE; - return -EINVAL; - } - - /* - * For DIPM, we will only enable it for the - * min_power setting. - * - * Why? Because Disks are too stupid to know that - * If the host rejects a request to go to SLUMBER - * they should retry at PARTIAL, and instead it - * just would give up. So, for medium_power to - * work at all, we need to only allow HIPM. - */ - rc = sata_scr_read(link, SCR_CONTROL, &scontrol); - if (rc) - return rc; - - switch (policy) { - case MIN_POWER: - /* no restrictions on IPM transitions */ - scontrol &= ~(0x3 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* enable DIPM */ - if (dev->flags & ATA_DFLAG_DIPM) - err_mask = ata_dev_set_feature(dev, - SETFEATURES_SATA_ENABLE, SATA_DIPM); - break; - case MEDIUM_POWER: - /* allow IPM to PARTIAL */ - scontrol &= ~(0x1 << 8); - scontrol |= (0x2 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* - * we don't have to disable DIPM since IPM flags - * disallow transitions to SLUMBER, which effectively - * disable DIPM if it does not support PARTIAL - */ - break; - case NOT_AVAILABLE: - case MAX_PERFORMANCE: - /* disable all IPM transitions */ - scontrol |= (0x3 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* - * we don't have to disable DIPM since IPM flags - * disallow all transitions which effectively - * disable DIPM anyway. - */ - break; - } - - /* FIXME: handle SET FEATURES failure */ - (void) err_mask; - - return 0; -} - -/** - * ata_dev_enable_pm - enable SATA interface power management - * @dev: device to enable power management - * @policy: the link power management policy - * - * Enable SATA Interface power management. This will enable - * Device Interface Power Management (DIPM) for min_power - * policy, and then call driver specific callbacks for - * enabling Host Initiated Power management. - * - * Locking: Caller. - * Returns: -EINVAL if IPM is not supported, 0 otherwise. - */ -void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy) -{ - int rc = 0; - struct ata_port *ap = dev->link->ap; - - /* set HIPM first, then DIPM */ - if (ap->ops->enable_pm) - rc = ap->ops->enable_pm(ap, policy); - if (rc) - goto enable_pm_out; - rc = ata_dev_set_dipm(dev, policy); - -enable_pm_out: - if (rc) - ap->pm_policy = MAX_PERFORMANCE; - else - ap->pm_policy = policy; - return /* rc */; /* hopefully we can use 'rc' eventually */ -} - -#ifdef CONFIG_PM -/** - * ata_dev_disable_pm - disable SATA interface power management - * @dev: device to disable power management - * - * Disable SATA Interface power management. This will disable - * Device Interface Power Management (DIPM) without changing - * policy, call driver specific callbacks for disabling Host - * Initiated Power management. - * - * Locking: Caller. - * Returns: void - */ -static void ata_dev_disable_pm(struct ata_device *dev) -{ - struct ata_port *ap = dev->link->ap; - - ata_dev_set_dipm(dev, MAX_PERFORMANCE); - if (ap->ops->disable_pm) - ap->ops->disable_pm(ap); -} -#endif /* CONFIG_PM */ - -void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy) -{ - ap->pm_policy = policy; - ap->link.eh_info.action |= ATA_EH_LPM; - ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY; - ata_port_schedule_eh(ap); -} - -#ifdef CONFIG_PM -static void ata_lpm_enable(struct ata_host *host) -{ - struct ata_link *link; - struct ata_port *ap; - struct ata_device *dev; - int i; - - for (i = 0; i < host->n_ports; i++) { - ap = host->ports[i]; - ata_for_each_link(link, ap, EDGE) { - ata_for_each_dev(dev, link, ALL) - ata_dev_disable_pm(dev); - } - } -} - -static void ata_lpm_disable(struct ata_host *host) -{ - int i; - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - ata_lpm_schedule(ap, ap->pm_policy); - } -} -#endif /* CONFIG_PM */ - /** * ata_dev_classify - determine device type based on ATA-spec signature * @tf: ATA taskfile register set for device to be identified @@ -1806,8 +1628,14 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, } } + if (ap->ops->error_handler) + ata_eh_release(ap); + rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); + if (ap->ops->error_handler) + ata_eh_acquire(ap); + ata_sff_flush_pio_task(ap); if (!rc) { @@ -2564,13 +2392,6 @@ int ata_dev_configure(struct ata_device *dev) if (dev->flags & ATA_DFLAG_LBA48) dev->max_sectors = ATA_MAX_SECTORS_LBA48; - if (!(dev->horkage & ATA_HORKAGE_IPM)) { - if (ata_id_has_hipm(dev->id)) - dev->flags |= ATA_DFLAG_HIPM; - if (ata_id_has_dipm(dev->id)) - dev->flags |= ATA_DFLAG_DIPM; - } - /* Limit PATA drive on SATA cable bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble(dev)) { @@ -2591,13 +2412,6 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); - if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) { - dev->horkage |= ATA_HORKAGE_IPM; - - /* reset link pm_policy for this port to no pm */ - ap->pm_policy = MAX_PERFORMANCE; - } - if (ap->ops->dev_config) ap->ops->dev_config(dev); @@ -3596,7 +3410,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, warned = 1; } - msleep(50); + ata_msleep(link->ap, 50); } } @@ -3617,7 +3431,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, int (*check_ready)(struct ata_link *link)) { - msleep(ATA_WAIT_AFTER_RESET); + ata_msleep(link->ap, ATA_WAIT_AFTER_RESET); return ata_wait_ready(link, deadline, check_ready); } @@ -3628,7 +3442,7 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, * @params: timing parameters { interval, duratinon, timeout } in msec * @deadline: deadline jiffies for the operation * -* Make sure SStatus of @link reaches stable state, determined by + * Make sure SStatus of @link reaches stable state, determined by * holding the same value where DET is not 1 for @duration polled * every @interval, before @timeout. Timeout constraints the * beginning of the stable state. Because DET gets stuck at 1 on @@ -3665,7 +3479,7 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params, last_jiffies = jiffies; while (1) { - msleep(interval); + ata_msleep(link->ap, interval); if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) return rc; cur &= 0xf; @@ -3730,7 +3544,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params, * immediately after resuming. Delay 200ms before * debouncing. */ - msleep(200); + ata_msleep(link->ap, 200); /* is SControl restored correctly? */ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) @@ -3760,6 +3574,72 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params, } /** + * sata_link_scr_lpm - manipulate SControl IPM and SPM fields + * @link: ATA link to manipulate SControl for + * @policy: LPM policy to configure + * @spm_wakeup: initiate LPM transition to active state + * + * Manipulate the IPM field of the SControl register of @link + * according to @policy. If @policy is ATA_LPM_MAX_POWER and + * @spm_wakeup is %true, the SPM field is manipulated to wake up + * the link. This function also clears PHYRDY_CHG before + * returning. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on succes, -errno otherwise. + */ +int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, + bool spm_wakeup) +{ + struct ata_eh_context *ehc = &link->eh_context; + bool woken_up = false; + u32 scontrol; + int rc; + + rc = sata_scr_read(link, SCR_CONTROL, &scontrol); + if (rc) + return rc; + + switch (policy) { + case ATA_LPM_MAX_POWER: + /* disable all LPM transitions */ + scontrol |= (0x3 << 8); + /* initiate transition to active state */ + if (spm_wakeup) { + scontrol |= (0x4 << 12); + woken_up = true; + } + break; + case ATA_LPM_MED_POWER: + /* allow LPM to PARTIAL */ + scontrol &= ~(0x1 << 8); + scontrol |= (0x2 << 8); + break; + case ATA_LPM_MIN_POWER: + /* no restrictions on LPM transitions */ + scontrol &= ~(0x3 << 8); + break; + default: + WARN_ON(1); + } + + rc = sata_scr_write(link, SCR_CONTROL, scontrol); + if (rc) + return rc; + + /* give the link time to transit out of LPM state */ + if (woken_up) + msleep(10); + + /* clear PHYRDY_CHG from SError */ + ehc->i.serror &= ~SERR_PHYRDY_CHG; + return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG); +} + +/** * ata_std_prereset - prepare for reset * @link: ATA link to be reset * @deadline: deadline jiffies for the operation @@ -3868,7 +3748,7 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 * 10.4.2 says at least 1 ms. */ - msleep(1); + ata_msleep(link->ap, 1); /* bring link back */ rc = sata_link_resume(link, timing, deadline); @@ -4551,6 +4431,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; } + /** * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES * @dev: Device to which command will be sent @@ -4566,8 +4447,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) * RETURNS: * 0 on success, AC_ERR_* mask otherwise. */ -static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, - u8 feature) +unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) { struct ata_taskfile tf; unsigned int err_mask; @@ -4943,8 +4823,13 @@ static void ata_verify_xfer(struct ata_queued_cmd *qc) * ata_qc_complete - Complete an active ATA command * @qc: Command to complete * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. + * Indicate to the mid and upper layers that an ATA command has + * completed, with either an ok or not-ok status. + * + * Refrain from calling this function multiple times when + * successfully completing multiple NCQ commands. + * ata_qc_complete_multiple() should be used instead, which will + * properly update IRQ expect state. * * LOCKING: * spin_lock_irqsave(host lock) @@ -5037,6 +4922,10 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * requests normally. ap->qc_active and @qc_active is compared * and commands are completed accordingly. * + * Always use this function when completing multiple NCQ commands + * from IRQ handlers instead of calling ata_qc_complete() + * multiple times to keep IRQ expect status properly in sync. + * * LOCKING: * spin_lock_irqsave(host lock) * @@ -5422,12 +5311,6 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg) int rc; /* - * disable link pm on all ports before requesting - * any pm activity - */ - ata_lpm_enable(host); - - /* * On some hardware, device fails to respond after spun down * for suspend. As the device won't be used before being * resumed, we don't need to touch the device. Ask EH to skip @@ -5460,9 +5343,6 @@ void ata_host_resume(struct ata_host *host) ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET, ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); host->dev->power.power_state = PMSG_ON; - - /* reenable link pm */ - ata_lpm_disable(host); } #endif @@ -5517,7 +5397,8 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp) int i; /* clear everything except for devices */ - memset(link, 0, offsetof(struct ata_link, device[0])); + memset((void *)link + ATA_LINK_CLEAR_BEGIN, 0, + ATA_LINK_CLEAR_END - ATA_LINK_CLEAR_BEGIN); link->ap = ap; link->pmp = pmp; @@ -5591,7 +5472,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) ap = kzalloc(sizeof(*ap), GFP_KERNEL); if (!ap) return NULL; - + ap->pflags |= ATA_PFLAG_INITIALIZING; ap->lock = &host->lock; ap->print_id = -1; @@ -5695,6 +5576,7 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports) dev_set_drvdata(dev, host); spin_lock_init(&host->lock); + mutex_init(&host->eh_mutex); host->dev = dev; host->n_ports = max_ports; @@ -5992,6 +5874,7 @@ void ata_host_init(struct ata_host *host, struct device *dev, unsigned long flags, struct ata_port_operations *ops) { spin_lock_init(&host->lock); + mutex_init(&host->eh_mutex); host->dev = dev; host->flags = flags; host->ops = ops; @@ -6022,7 +5905,7 @@ static void async_port_probe(void *data, async_cookie_t cookie) spin_lock_irqsave(ap->lock, flags); ehi->probe_mask |= ATA_ALL_DEVICES; - ehi->action |= ATA_EH_RESET | ATA_EH_LPM; + ehi->action |= ATA_EH_RESET; ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; ap->pflags &= ~ATA_PFLAG_INITIALIZING; @@ -6093,9 +5976,18 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) for (i = 0; i < host->n_ports; i++) host->ports[i]->print_id = ata_print_id++; + + /* Create associated sysfs transport objects */ + for (i = 0; i < host->n_ports; i++) { + rc = ata_tport_add(host->dev,host->ports[i]); + if (rc) { + goto err_tadd; + } + } + rc = ata_scsi_add_hosts(host, sht); if (rc) - return rc; + goto err_tadd; /* associate with ACPI nodes */ ata_acpi_associate(host); @@ -6136,6 +6028,13 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) } return 0; + + err_tadd: + while (--i >= 0) { + ata_tport_delete(host->ports[i]); + } + return rc; + } /** @@ -6226,6 +6125,13 @@ static void ata_port_detach(struct ata_port *ap) cancel_rearming_delayed_work(&ap->hotplug_task); skip_eh: + if (ap->pmp_link) { + int i; + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) + ata_tlink_delete(&ap->pmp_link[i]); + } + ata_tport_delete(ap); + /* remove the associated SCSI host */ scsi_remove_host(ap->scsi_host); } @@ -6542,7 +6448,7 @@ static void __init ata_parse_force_param(void) static int __init ata_init(void) { - int rc = -ENOMEM; + int rc; ata_parse_force_param(); @@ -6552,12 +6458,25 @@ static int __init ata_init(void) return rc; } + libata_transport_init(); + ata_scsi_transport_template = ata_attach_transport(); + if (!ata_scsi_transport_template) { + ata_sff_exit(); + rc = -ENOMEM; + goto err_out; + } + printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); return 0; + +err_out: + return rc; } static void __exit ata_exit(void) { + ata_release_transport(ata_scsi_transport_template); + libata_transport_exit(); ata_sff_exit(); kfree(ata_force_tbl); } @@ -6573,7 +6492,35 @@ int ata_ratelimit(void) } /** + * ata_msleep - ATA EH owner aware msleep + * @ap: ATA port to attribute the sleep to + * @msecs: duration to sleep in milliseconds + * + * Sleeps @msecs. If the current task is owner of @ap's EH, the + * ownership is released before going to sleep and reacquired + * after the sleep is complete. IOW, other ports sharing the + * @ap->host will be allowed to own the EH while this task is + * sleeping. + * + * LOCKING: + * Might sleep. + */ +void ata_msleep(struct ata_port *ap, unsigned int msecs) +{ + bool owns_eh = ap && ap->host->eh_owner == current; + + if (owns_eh) + ata_eh_release(ap); + + msleep(msecs); + + if (owns_eh) + ata_eh_acquire(ap); +} + +/** * ata_wait_register - wait until register value changes + * @ap: ATA port to wait register for, can be NULL * @reg: IO-mapped register * @mask: Mask to apply to read register value * @val: Wait condition @@ -6595,7 +6542,7 @@ int ata_ratelimit(void) * RETURNS: * The final register value. */ -u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, +u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val, unsigned long interval, unsigned long timeout) { unsigned long deadline; @@ -6610,7 +6557,7 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, deadline = ata_deadline(jiffies, timeout); while ((tmp & mask) == val && time_before(jiffies, deadline)) { - msleep(interval); + ata_msleep(ap, interval); tmp = ioread32(reg); } @@ -6686,6 +6633,7 @@ EXPORT_SYMBOL_GPL(sata_set_spd); EXPORT_SYMBOL_GPL(ata_wait_after_reset); EXPORT_SYMBOL_GPL(sata_link_debounce); EXPORT_SYMBOL_GPL(sata_link_resume); +EXPORT_SYMBOL_GPL(sata_link_scr_lpm); EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(sata_link_hardreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); @@ -6693,6 +6641,7 @@ EXPORT_SYMBOL_GPL(ata_std_postreset); EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_pair); EXPORT_SYMBOL_GPL(ata_ratelimit); +EXPORT_SYMBOL_GPL(ata_msleep); EXPORT_SYMBOL_GPL(ata_wait_register); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index e48302eae55f..5e590504f3aa 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -57,6 +57,7 @@ enum { /* error flags */ ATA_EFLAG_IS_IO = (1 << 0), ATA_EFLAG_DUBIOUS_XFER = (1 << 1), + ATA_EFLAG_OLD_ER = (1 << 31), /* error categories */ ATA_ECAT_NONE = 0, @@ -396,14 +397,9 @@ static struct ata_ering_entry *ata_ering_top(struct ata_ering *ering) return NULL; } -static void ata_ering_clear(struct ata_ering *ering) -{ - memset(ering, 0, sizeof(*ering)); -} - -static int ata_ering_map(struct ata_ering *ering, - int (*map_fn)(struct ata_ering_entry *, void *), - void *arg) +int ata_ering_map(struct ata_ering *ering, + int (*map_fn)(struct ata_ering_entry *, void *), + void *arg) { int idx, rc = 0; struct ata_ering_entry *ent; @@ -422,6 +418,17 @@ static int ata_ering_map(struct ata_ering *ering, return rc; } +int ata_ering_clear_cb(struct ata_ering_entry *ent, void *void_arg) +{ + ent->eflags |= ATA_EFLAG_OLD_ER; + return 0; +} + +static void ata_ering_clear(struct ata_ering *ering) +{ + ata_ering_map(ering, ata_ering_clear_cb, NULL); +} + static unsigned int ata_eh_dev_action(struct ata_device *dev) { struct ata_eh_context *ehc = &dev->link->eh_context; @@ -456,6 +463,41 @@ static void ata_eh_clear_action(struct ata_link *link, struct ata_device *dev, } /** + * ata_eh_acquire - acquire EH ownership + * @ap: ATA port to acquire EH ownership for + * + * Acquire EH ownership for @ap. This is the basic exclusion + * mechanism for ports sharing a host. Only one port hanging off + * the same host can claim the ownership of EH. + * + * LOCKING: + * EH context. + */ +void ata_eh_acquire(struct ata_port *ap) +{ + mutex_lock(&ap->host->eh_mutex); + WARN_ON_ONCE(ap->host->eh_owner); + ap->host->eh_owner = current; +} + +/** + * ata_eh_release - release EH ownership + * @ap: ATA port to release EH ownership for + * + * Release EH ownership for @ap if the caller. The caller must + * have acquired EH ownership using ata_eh_acquire() previously. + * + * LOCKING: + * EH context. + */ +void ata_eh_release(struct ata_port *ap) +{ + WARN_ON_ONCE(ap->host->eh_owner != current); + ap->host->eh_owner = NULL; + mutex_unlock(&ap->host->eh_mutex); +} + +/** * ata_scsi_timed_out - SCSI layer time out callback * @cmd: timed out SCSI command * @@ -572,19 +614,19 @@ void ata_scsi_error(struct Scsi_Host *host) int nr_timedout = 0; spin_lock_irqsave(ap->lock, flags); - + /* This must occur under the ap->lock as we don't want a polled recovery to race the real interrupt handler - + The lost_interrupt handler checks for any completed but non-notified command and completes much like an IRQ handler. - + We then fall into the error recovery code which will treat this as if normal completion won the race */ if (ap->ops->lost_interrupt) ap->ops->lost_interrupt(ap); - + list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { struct ata_queued_cmd *qc; @@ -628,15 +670,17 @@ void ata_scsi_error(struct Scsi_Host *host) ap->eh_tries = ATA_EH_MAX_TRIES; } else spin_unlock_wait(ap->lock); - + /* If we timed raced normal completion and there is nothing to recover nr_timedout == 0 why exactly are we doing error recovery ? */ - repeat: /* invoke error handler */ if (ap->ops->error_handler) { struct ata_link *link; + /* acquire EH ownership */ + ata_eh_acquire(ap); + repeat: /* kill fast drain timer */ del_timer_sync(&ap->fastdrain_timer); @@ -711,6 +755,7 @@ void ata_scsi_error(struct Scsi_Host *host) host->host_eh_scheduled = 0; spin_unlock_irqrestore(ap->lock, flags); + ata_eh_release(ap); } else { WARN_ON(ata_qc_from_tag(ap, ap->link.active_tag) == NULL); ap->ops->eng_timeout(ap); @@ -772,7 +817,7 @@ void ata_port_wait_eh(struct ata_port *ap) /* make sure SCSI EH is complete */ if (scsi_host_in_recovery(ap->scsi_host)) { - msleep(10); + ata_msleep(ap, 10); goto retry; } } @@ -1573,9 +1618,9 @@ static void ata_eh_analyze_serror(struct ata_link *link) * host links. For disabled PMP links, only N bit is * considered as X bit is left at 1 for link plugging. */ - hotplug_mask = 0; - - if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link)) + if (link->lpm_policy != ATA_LPM_MAX_POWER) + hotplug_mask = 0; /* hotplug doesn't work w/ LPM */ + else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link)) hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG; else hotplug_mask = SERR_PHYRDY_CHG; @@ -1755,7 +1800,7 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) struct speed_down_verdict_arg *arg = void_arg; int cat; - if (ent->timestamp < arg->since) + if ((ent->eflags & ATA_EFLAG_OLD_ER) || (ent->timestamp < arg->since)) return -1; cat = ata_eh_categorize_error(ent->eflags, ent->err_mask, @@ -2777,8 +2822,9 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_done(link, NULL, ATA_EH_RESET); if (slave) ata_eh_done(slave, NULL, ATA_EH_RESET); - ehc->last_reset = jiffies; /* update to completion time */ + ehc->last_reset = jiffies; /* update to completion time */ ehc->i.action |= ATA_EH_REVALIDATE; + link->lpm_policy = ATA_LPM_UNKNOWN; /* reset LPM state */ rc = 0; out: @@ -2810,8 +2856,10 @@ int ata_eh_reset(struct ata_link *link, int classify, "reset failed (errno=%d), retrying in %u secs\n", rc, DIV_ROUND_UP(jiffies_to_msecs(delta), 1000)); + ata_eh_release(ap); while (delta) delta = schedule_timeout_uninterruptible(delta); + ata_eh_acquire(ap); } if (try == max_tries - 1) { @@ -3204,6 +3252,124 @@ static int ata_eh_maybe_retry_flush(struct ata_device *dev) return rc; } +/** + * ata_eh_set_lpm - configure SATA interface power management + * @link: link to configure power management + * @policy: the link power management policy + * @r_failed_dev: out parameter for failed device + * + * Enable SATA Interface power management. This will enable + * Device Interface Power Management (DIPM) for min_power + * policy, and then call driver specific callbacks for + * enabling Host Initiated Power management. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + struct ata_device **r_failed_dev) +{ + struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL; + unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM; + unsigned int err_mask; + int rc; + + /* if the link or host doesn't do LPM, noop */ + if ((link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm)) + return 0; + + /* + * DIPM is enabled only for MIN_POWER as some devices + * misbehave when the host NACKs transition to SLUMBER. Order + * device and link configurations such that the host always + * allows DIPM requests. + */ + ata_for_each_dev(dev, link, ENABLED) { + bool hipm = ata_id_has_hipm(dev->id); + bool dipm = ata_id_has_dipm(dev->id); + + /* find the first enabled and LPM enabled devices */ + if (!link_dev) + link_dev = dev; + + if (!lpm_dev && (hipm || dipm)) + lpm_dev = dev; + + hints &= ~ATA_LPM_EMPTY; + if (!hipm) + hints &= ~ATA_LPM_HIPM; + + /* disable DIPM before changing link config */ + if (policy != ATA_LPM_MIN_POWER && dipm) { + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_DISABLE, SATA_DIPM); + if (err_mask && err_mask != AC_ERR_DEV) { + ata_dev_printk(dev, KERN_WARNING, + "failed to disable DIPM, Emask 0x%x\n", + err_mask); + rc = -EIO; + goto fail; + } + } + } + + if (ap) { + rc = ap->ops->set_lpm(link, policy, hints); + if (!rc && ap->slave_link) + rc = ap->ops->set_lpm(ap->slave_link, policy, hints); + } else + rc = sata_pmp_set_lpm(link, policy, hints); + + /* + * Attribute link config failure to the first (LPM) enabled + * device on the link. + */ + if (rc) { + if (rc == -EOPNOTSUPP) { + link->flags |= ATA_LFLAG_NO_LPM; + return 0; + } + dev = lpm_dev ? lpm_dev : link_dev; + goto fail; + } + + /* host config updated, enable DIPM if transitioning to MIN_POWER */ + ata_for_each_dev(dev, link, ENABLED) { + if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) { + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_ENABLE, SATA_DIPM); + if (err_mask && err_mask != AC_ERR_DEV) { + ata_dev_printk(dev, KERN_WARNING, + "failed to enable DIPM, Emask 0x%x\n", + err_mask); + rc = -EIO; + goto fail; + } + } + } + + link->lpm_policy = policy; + if (ap && ap->slave_link) + ap->slave_link->lpm_policy = policy; + return 0; + +fail: + /* if no device or only one more chance is left, disable LPM */ + if (!dev || ehc->tries[dev->devno] <= 2) { + ata_link_printk(link, KERN_WARNING, + "disabling LPM on the link\n"); + link->flags |= ATA_LFLAG_NO_LPM; + } + if (r_failed_dev) + *r_failed_dev = dev; + return rc; +} + static int ata_link_nr_enabled(struct ata_link *link) { struct ata_device *dev; @@ -3288,6 +3454,16 @@ static int ata_eh_schedule_probe(struct ata_device *dev) ehc->saved_xfer_mode[dev->devno] = 0; ehc->saved_ncq_enabled &= ~(1 << dev->devno); + /* the link maybe in a deep sleep, wake it up */ + if (link->lpm_policy > ATA_LPM_MAX_POWER) { + if (ata_is_host_link(link)) + link->ap->ops->set_lpm(link, ATA_LPM_MAX_POWER, + ATA_LPM_EMPTY); + else + sata_pmp_set_lpm(link, ATA_LPM_MAX_POWER, + ATA_LPM_EMPTY); + } + /* Record and count probe trials on the ering. The specific * error mask used is irrelevant. Because a successful device * detection clears the ering, this count accumulates only if @@ -3389,8 +3565,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, { struct ata_link *link; struct ata_device *dev; - int nr_failed_devs; - int rc; + int rc, nr_fails; unsigned long flags, deadline; DPRINTK("ENTER\n"); @@ -3431,7 +3606,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, retry: rc = 0; - nr_failed_devs = 0; /* if UNLOADING, finish immediately */ if (ap->pflags & ATA_PFLAG_UNLOADING) @@ -3501,8 +3675,10 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (time_before_eq(deadline, now)) break; + ata_eh_release(ap); deadline = wait_for_completion_timeout(&ap->park_req_pending, deadline - now); + ata_eh_acquire(ap); } while (deadline); ata_for_each_link(link, ap, EDGE) { ata_for_each_dev(dev, link, ALL) { @@ -3516,13 +3692,17 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, } /* the rest */ - ata_for_each_link(link, ap, EDGE) { + nr_fails = 0; + ata_for_each_link(link, ap, PMP_FIRST) { struct ata_eh_context *ehc = &link->eh_context; + if (sata_pmp_attached(ap) && ata_is_host_link(link)) + goto config_lpm; + /* revalidate existing devices and attach new ones */ rc = ata_eh_revalidate_and_attach(link, &dev); if (rc) - goto dev_fail; + goto rest_fail; /* if PMP got attached, return, pmp EH will take care of it */ if (link->device->class == ATA_DEV_PMP) { @@ -3534,7 +3714,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (ehc->i.flags & ATA_EHI_SETMODE) { rc = ata_set_mode(link, &dev); if (rc) - goto dev_fail; + goto rest_fail; ehc->i.flags &= ~ATA_EHI_SETMODE; } @@ -3547,7 +3727,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, continue; rc = atapi_eh_clear_ua(dev); if (rc) - goto dev_fail; + goto rest_fail; } } @@ -3557,21 +3737,25 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, continue; rc = ata_eh_maybe_retry_flush(dev); if (rc) - goto dev_fail; + goto rest_fail; } + config_lpm: /* configure link power saving */ - if (ehc->i.action & ATA_EH_LPM) - ata_for_each_dev(dev, link, ALL) - ata_dev_enable_pm(dev, ap->pm_policy); + if (link->lpm_policy != ap->target_lpm_policy) { + rc = ata_eh_set_lpm(link, ap->target_lpm_policy, &dev); + if (rc) + goto rest_fail; + } /* this link is okay now */ ehc->i.flags = 0; continue; -dev_fail: - nr_failed_devs++; - ata_eh_handle_dev_fail(dev, rc); + rest_fail: + nr_fails++; + if (dev) + ata_eh_handle_dev_fail(dev, rc); if (ap->pflags & ATA_PFLAG_FROZEN) { /* PMP reset requires working host port. @@ -3583,7 +3767,7 @@ dev_fail: } } - if (nr_failed_devs) + if (nr_fails) goto retry; out: diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 224faabd7b7e..3120596d4afc 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -11,6 +11,7 @@ #include <linux/libata.h> #include <linux/slab.h> #include "libata.h" +#include "libata-transport.h" const struct ata_port_operations sata_pmp_port_ops = { .inherits = &sata_port_ops, @@ -185,6 +186,27 @@ int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val) } /** + * sata_pmp_set_lpm - configure LPM for a PMP link + * @link: PMP link to configure LPM for + * @policy: target LPM policy + * @hints: LPM hints + * + * Configure LPM for @link. This function will contain any PMP + * specific workarounds if necessary. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_pmp_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints) +{ + return sata_link_scr_lpm(link, policy, true); +} + +/** * sata_pmp_read_gscr - read GSCR block of SATA PMP * @dev: PMP device * @gscr: buffer to read GSCR block into @@ -312,10 +334,10 @@ static int sata_pmp_configure(struct ata_device *dev, int print_info) return rc; } -static int sata_pmp_init_links(struct ata_port *ap, int nr_ports) +static int sata_pmp_init_links (struct ata_port *ap, int nr_ports) { struct ata_link *pmp_link = ap->pmp_link; - int i; + int i, err; if (!pmp_link) { pmp_link = kzalloc(sizeof(pmp_link[0]) * SATA_PMP_MAX_PORTS, @@ -327,6 +349,13 @@ static int sata_pmp_init_links(struct ata_port *ap, int nr_ports) ata_link_init(ap, &pmp_link[i], i); ap->pmp_link = pmp_link; + + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) { + err = ata_tlink_add(&pmp_link[i]); + if (err) { + goto err_tlink; + } + } } for (i = 0; i < nr_ports; i++) { @@ -339,6 +368,12 @@ static int sata_pmp_init_links(struct ata_port *ap, int nr_ports) } return 0; + err_tlink: + while (--i >= 0) + ata_tlink_delete(&pmp_link[i]); + kfree(pmp_link); + ap->pmp_link = NULL; + return err; } static void sata_pmp_quirks(struct ata_port *ap) @@ -351,6 +386,9 @@ static void sata_pmp_quirks(struct ata_port *ap) if (vendor == 0x1095 && devid == 0x3726) { /* sil3726 quirks */ ata_for_each_link(link, ap, EDGE) { + /* link reports offline after LPM */ + link->flags |= ATA_LFLAG_NO_LPM; + /* Class code report is unreliable and SRST * times out under certain configurations. */ @@ -366,6 +404,9 @@ static void sata_pmp_quirks(struct ata_port *ap) } else if (vendor == 0x1095 && devid == 0x4723) { /* sil4723 quirks */ ata_for_each_link(link, ap, EDGE) { + /* link reports offline after LPM */ + link->flags |= ATA_LFLAG_NO_LPM; + /* class code report is unreliable */ if (link->pmp < 2) link->flags |= ATA_LFLAG_ASSUME_ATA; @@ -378,6 +419,9 @@ static void sata_pmp_quirks(struct ata_port *ap) } else if (vendor == 0x1095 && devid == 0x4726) { /* sil4726 quirks */ ata_for_each_link(link, ap, EDGE) { + /* link reports offline after LPM */ + link->flags |= ATA_LFLAG_NO_LPM; + /* Class code report is unreliable and SRST * times out under certain configurations. * Config device can be at port 0 or 5 and @@ -938,15 +982,25 @@ static int sata_pmp_eh_recover(struct ata_port *ap) if (rc) goto link_fail; - /* Connection status might have changed while resetting other - * links, check SATA_PMP_GSCR_ERROR before returning. - */ - /* clear SNotification */ rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf); if (rc == 0) sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf); + /* + * If LPM is active on any fan-out port, hotplug wouldn't + * work. Return w/ PHY event notification disabled. + */ + ata_for_each_link(link, ap, EDGE) + if (link->lpm_policy > ATA_LPM_MAX_POWER) + return 0; + + /* + * Connection status might have changed while resetting other + * links, enable notification and check SATA_PMP_GSCR_ERROR + * before returning. + */ + /* enable notification */ if (pmp_dev->flags & ATA_DFLAG_AN) { gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a89172c100f5..d050e073e570 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -51,8 +51,8 @@ #include <asm/unaligned.h> #include "libata.h" +#include "libata-transport.h" -#define SECTOR_SIZE 512 #define ATA_SCSI_RBUF_SIZE 4096 static DEFINE_SPINLOCK(ata_scsi_rbuf_lock); @@ -64,9 +64,6 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); static struct ata_device *ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); -static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, - unsigned int id, unsigned int lun); - #define RW_RECOVERY_MPAGE 0x1 #define RW_RECOVERY_MPAGE_LEN 12 @@ -106,83 +103,55 @@ static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { 0, 30 /* extended self test time, see 05-359r1 */ }; -/* - * libata transport template. libata doesn't do real transport stuff. - * It just needs the eh_timed_out hook. - */ -static struct scsi_transport_template ata_scsi_transport_template = { - .eh_strategy_handler = ata_scsi_error, - .eh_timed_out = ata_scsi_timed_out, - .user_scan = ata_scsi_user_scan, -}; - - -static const struct { - enum link_pm value; - const char *name; -} link_pm_policy[] = { - { NOT_AVAILABLE, "max_performance" }, - { MIN_POWER, "min_power" }, - { MAX_PERFORMANCE, "max_performance" }, - { MEDIUM_POWER, "medium_power" }, +static const char *ata_lpm_policy_names[] = { + [ATA_LPM_UNKNOWN] = "max_performance", + [ATA_LPM_MAX_POWER] = "max_performance", + [ATA_LPM_MED_POWER] = "medium_power", + [ATA_LPM_MIN_POWER] = "min_power", }; -static const char *ata_scsi_lpm_get(enum link_pm policy) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(link_pm_policy); i++) - if (link_pm_policy[i].value == policy) - return link_pm_policy[i].name; - - return NULL; -} - -static ssize_t ata_scsi_lpm_put(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t ata_scsi_lpm_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); - enum link_pm policy = 0; - int i; + enum ata_lpm_policy policy; + unsigned long flags; - /* - * we are skipping array location 0 on purpose - this - * is because a value of NOT_AVAILABLE is displayed - * to the user as max_performance, but when the user - * writes "max_performance", they actually want the - * value to match MAX_PERFORMANCE. - */ - for (i = 1; i < ARRAY_SIZE(link_pm_policy); i++) { - const int len = strlen(link_pm_policy[i].name); - if (strncmp(link_pm_policy[i].name, buf, len) == 0) { - policy = link_pm_policy[i].value; + /* UNKNOWN is internal state, iterate from MAX_POWER */ + for (policy = ATA_LPM_MAX_POWER; + policy < ARRAY_SIZE(ata_lpm_policy_names); policy++) { + const char *name = ata_lpm_policy_names[policy]; + + if (strncmp(name, buf, strlen(name)) == 0) break; - } } - if (!policy) + if (policy == ARRAY_SIZE(ata_lpm_policy_names)) return -EINVAL; - ata_lpm_schedule(ap, policy); + spin_lock_irqsave(ap->lock, flags); + ap->target_lpm_policy = policy; + ata_port_schedule_eh(ap); + spin_unlock_irqrestore(ap->lock, flags); + return count; } -static ssize_t -ata_scsi_lpm_show(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t ata_scsi_lpm_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); - const char *policy = - ata_scsi_lpm_get(ap->pm_policy); - if (!policy) + if (ap->target_lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names)) return -EINVAL; - return snprintf(buf, 23, "%s\n", policy); + return snprintf(buf, PAGE_SIZE, "%s\n", + ata_lpm_policy_names[ap->target_lpm_policy]); } DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, - ata_scsi_lpm_show, ata_scsi_lpm_put); + ata_scsi_lpm_show, ata_scsi_lpm_store); EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy); static ssize_t ata_scsi_park_show(struct device *device, @@ -516,7 +485,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) memset(scsi_cmd, 0, sizeof(scsi_cmd)); if (args[3]) { - argsize = SECTOR_SIZE * args[3]; + argsize = ATA_SECT_SIZE * args[3]; argbuf = kmalloc(argsize, GFP_KERNEL); if (argbuf == NULL) { rc = -ENOMEM; @@ -1150,8 +1119,9 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN); } else { /* ATA devices must be sector aligned */ + sdev->sector_size = ata_id_logical_sector_size(dev->id); blk_queue_update_dma_alignment(sdev->request_queue, - ATA_SECT_SIZE - 1); + sdev->sector_size - 1); sdev->manage_start_stop = 1; } @@ -1166,6 +1136,7 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); } + dev->sdev = sdev; return 0; } @@ -1696,7 +1667,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) goto nothing_to_do; qc->flags |= ATA_QCFLAG_IO; - qc->nbytes = n_block * ATA_SECT_SIZE; + qc->nbytes = n_block * scmd->device->sector_size; rc = ata_build_rw_tf(&qc->tf, qc->dev, block, n_block, tf_flags, qc->tag); @@ -2001,6 +1972,7 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf) 0x89, /* page 0x89, ata info page */ 0xb0, /* page 0xb0, block limits page */ 0xb1, /* page 0xb1, block device characteristics page */ + 0xb2, /* page 0xb2, thin provisioning page */ }; rbuf[3] = sizeof(pages); /* number of supported VPD pages */ @@ -2123,7 +2095,7 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf) static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf) { - u32 min_io_sectors; + u16 min_io_sectors; rbuf[1] = 0xb0; rbuf[3] = 0x3c; /* required VPD size with unmap support */ @@ -2135,10 +2107,7 @@ static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf) * logical than physical sector size we need to figure out what the * latter is. */ - if (ata_id_has_large_logical_sectors(args->id)) - min_io_sectors = ata_id_logical_per_physical_sectors(args->id); - else - min_io_sectors = 1; + min_io_sectors = 1 << ata_id_log2_per_physical_sector(args->id); put_unaligned_be16(min_io_sectors, &rbuf[6]); /* @@ -2172,6 +2141,16 @@ static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) return 0; } +static unsigned int ata_scsiop_inq_b2(struct ata_scsi_args *args, u8 *rbuf) +{ + /* SCSI Thin Provisioning VPD page: SBC-3 rev 22 or later */ + rbuf[1] = 0xb2; + rbuf[3] = 0x4; + rbuf[5] = 1 << 6; /* TPWS */ + + return 0; +} + /** * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. @@ -2397,21 +2376,13 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) { struct ata_device *dev = args->dev; u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */ - u8 log_per_phys = 0; - u16 lowest_aligned = 0; - u16 word_106 = dev->id[106]; - u16 word_209 = dev->id[209]; - - if ((word_106 & 0xc000) == 0x4000) { - /* Number and offset of logical sectors per physical sector */ - if (word_106 & (1 << 13)) - log_per_phys = word_106 & 0xf; - if ((word_209 & 0xc000) == 0x4000) { - u16 first = dev->id[209] & 0x3fff; - if (first > 0) - lowest_aligned = (1 << log_per_phys) - first; - } - } + u32 sector_size; /* physical sector size in bytes */ + u8 log2_per_phys; + u16 lowest_aligned; + + sector_size = ata_id_logical_sector_size(dev->id); + log2_per_phys = ata_id_log2_per_physical_sector(dev->id); + lowest_aligned = ata_id_logical_sector_offset(dev->id, log2_per_phys); VPRINTK("ENTER\n"); @@ -2426,8 +2397,10 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) rbuf[3] = last_lba; /* sector size */ - rbuf[6] = ATA_SECT_SIZE >> 8; - rbuf[7] = ATA_SECT_SIZE & 0xff; + rbuf[4] = sector_size >> (8 * 3); + rbuf[5] = sector_size >> (8 * 2); + rbuf[6] = sector_size >> (8 * 1); + rbuf[7] = sector_size; } else { /* sector count, 64-bit */ rbuf[0] = last_lba >> (8 * 7); @@ -2440,11 +2413,13 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) rbuf[7] = last_lba; /* sector size */ - rbuf[10] = ATA_SECT_SIZE >> 8; - rbuf[11] = ATA_SECT_SIZE & 0xff; + rbuf[ 8] = sector_size >> (8 * 3); + rbuf[ 9] = sector_size >> (8 * 2); + rbuf[10] = sector_size >> (8 * 1); + rbuf[11] = sector_size; rbuf[12] = 0; - rbuf[13] = log_per_phys; + rbuf[13] = log2_per_phys; rbuf[14] = (lowest_aligned >> 8) & 0x3f; rbuf[15] = lowest_aligned; @@ -2888,9 +2863,8 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) tf->device = dev->devno ? tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; - /* READ/WRITE LONG use a non-standard sect_size */ - qc->sect_size = ATA_SECT_SIZE; switch (tf->command) { + /* READ/WRITE LONG use a non-standard sect_size */ case ATA_CMD_READ_LONG: case ATA_CMD_READ_LONG_ONCE: case ATA_CMD_WRITE_LONG: @@ -2898,6 +2872,45 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1) goto invalid_fld; qc->sect_size = scsi_bufflen(scmd); + break; + + /* commands using reported Logical Block size (e.g. 512 or 4K) */ + case ATA_CMD_CFA_WRITE_NE: + case ATA_CMD_CFA_TRANS_SECT: + case ATA_CMD_CFA_WRITE_MULT_NE: + /* XXX: case ATA_CMD_CFA_WRITE_SECTORS_WITHOUT_ERASE: */ + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_READ_QUEUED: + /* XXX: case ATA_CMD_READ_QUEUED_EXT: */ + case ATA_CMD_FPDMA_READ: + case ATA_CMD_READ_MULTI: + case ATA_CMD_READ_MULTI_EXT: + case ATA_CMD_PIO_READ: + case ATA_CMD_PIO_READ_EXT: + case ATA_CMD_READ_STREAM_DMA_EXT: + case ATA_CMD_READ_STREAM_EXT: + case ATA_CMD_VERIFY: + case ATA_CMD_VERIFY_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + case ATA_CMD_WRITE_FUA_EXT: + case ATA_CMD_WRITE_QUEUED: + case ATA_CMD_WRITE_QUEUED_FUA_EXT: + case ATA_CMD_FPDMA_WRITE: + case ATA_CMD_WRITE_MULTI: + case ATA_CMD_WRITE_MULTI_EXT: + case ATA_CMD_WRITE_MULTI_FUA_EXT: + case ATA_CMD_PIO_WRITE: + case ATA_CMD_PIO_WRITE_EXT: + case ATA_CMD_WRITE_STREAM_DMA_EXT: + case ATA_CMD_WRITE_STREAM_EXT: + qc->sect_size = scmd->device->sector_size; + break; + + /* Everything else uses 512 byte "sectors" */ + default: + qc->sect_size = ATA_SECT_SIZE; } /* @@ -3250,6 +3263,9 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, case 0xb1: ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1); break; + case 0xb2: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b2); + break; default: ata_scsi_invalid_field(cmd, done); break; @@ -3334,7 +3350,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) *(struct ata_port **)&shost->hostdata[0] = ap; ap->scsi_host = shost; - shost->transportt = &ata_scsi_transport_template; + shost->transportt = ata_scsi_transport_template; shost->unique_id = ap->print_id; shost->max_id = 16; shost->max_lun = 1; @@ -3393,6 +3409,8 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync) if (!IS_ERR(sdev)) { dev->sdev = sdev; scsi_device_put(sdev); + } else { + dev->sdev = NULL; } } } @@ -3616,8 +3634,8 @@ void ata_scsi_hotplug(struct work_struct *work) * RETURNS: * Zero. */ -static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, - unsigned int id, unsigned int lun) +int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun) { struct ata_port *ap = ata_shost_to_port(shost); unsigned long flags; diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index e30c537cce32..14d18bf81255 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -222,7 +222,7 @@ int ata_sff_busy_sleep(struct ata_port *ap, timeout = ata_deadline(timer_start, tmout_pat); while (status != 0xff && (status & ATA_BUSY) && time_before(jiffies, timeout)) { - msleep(50); + ata_msleep(ap, 50); status = ata_sff_busy_wait(ap, ATA_BUSY, 3); } @@ -234,7 +234,7 @@ int ata_sff_busy_sleep(struct ata_port *ap, timeout = ata_deadline(timer_start, tmout); while (status != 0xff && (status & ATA_BUSY) && time_before(jiffies, timeout)) { - msleep(50); + ata_msleep(ap, 50); status = ap->ops->sff_check_status(ap); } @@ -360,7 +360,7 @@ static void ata_dev_select(struct ata_port *ap, unsigned int device, if (wait) { if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI) - msleep(150); + ata_msleep(ap, 150); ata_wait_idle(ap); } } @@ -1356,7 +1356,7 @@ fsm_start: */ status = ata_sff_busy_wait(ap, ATA_BUSY, 5); if (status & ATA_BUSY) { - msleep(2); + ata_msleep(ap, 2); status = ata_sff_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { ata_sff_queue_pio_task(link, ATA_SHORT_PAUSE); @@ -1937,7 +1937,7 @@ int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask, unsigned int dev1 = devmask & (1 << 1); int rc, ret = 0; - msleep(ATA_WAIT_AFTER_RESET); + ata_msleep(ap, ATA_WAIT_AFTER_RESET); /* always check readiness of the master device */ rc = ata_sff_wait_ready(link, deadline); @@ -1966,7 +1966,7 @@ int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask, lbal = ioread8(ioaddr->lbal_addr); if ((nsect == 1) && (lbal == 1)) break; - msleep(50); /* give drive a breather */ + ata_msleep(ap, 50); /* give drive a breather */ } rc = ata_sff_wait_ready(link, deadline); @@ -3342,7 +3342,7 @@ int __init ata_sff_init(void) return 0; } -void __exit ata_sff_exit(void) +void ata_sff_exit(void) { destroy_workqueue(ata_sff_wq); } diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c new file mode 100644 index 000000000000..ce9dc6207f37 --- /dev/null +++ b/drivers/ata/libata-transport.c @@ -0,0 +1,774 @@ +/* + * Copyright 2008 ioogle, Inc. All rights reserved. + * Released under GPL v2. + * + * Libata transport class. + * + * The ATA transport class contains common code to deal with ATA HBAs, + * an approximated representation of ATA topologies in the driver model, + * and various sysfs attributes to expose these topologies and management + * interfaces to user-space. + * + * There are 3 objects defined in in this class: + * - ata_port + * - ata_link + * - ata_device + * Each port has a link object. Each link can have up to two devices for PATA + * and generally one for SATA. + * If there is SATA port multiplier [PMP], 15 additional ata_link object are + * created. + * + * These objects are created when the ata host is initialized and when a PMP is + * found. They are removed only when the HBA is removed, cleaned before the + * error handler runs. + */ + + +#include <linux/kernel.h> +#include <linux/blkdev.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <scsi/scsi_transport.h> +#include <linux/libata.h> +#include <linux/hdreg.h> +#include <linux/uaccess.h> + +#include "libata.h" +#include "libata-transport.h" + +#define ATA_PORT_ATTRS 2 +#define ATA_LINK_ATTRS 3 +#define ATA_DEV_ATTRS 9 + +struct scsi_transport_template; +struct scsi_transport_template *ata_scsi_transport_template; + +struct ata_internal { + struct scsi_transport_template t; + + struct device_attribute private_port_attrs[ATA_PORT_ATTRS]; + struct device_attribute private_link_attrs[ATA_LINK_ATTRS]; + struct device_attribute private_dev_attrs[ATA_DEV_ATTRS]; + + struct transport_container link_attr_cont; + struct transport_container dev_attr_cont; + + /* + * The array of null terminated pointers to attributes + * needed by scsi_sysfs.c + */ + struct device_attribute *link_attrs[ATA_LINK_ATTRS + 1]; + struct device_attribute *port_attrs[ATA_PORT_ATTRS + 1]; + struct device_attribute *dev_attrs[ATA_DEV_ATTRS + 1]; +}; +#define to_ata_internal(tmpl) container_of(tmpl, struct ata_internal, t) + + +#define tdev_to_device(d) \ + container_of((d), struct ata_device, tdev) +#define transport_class_to_dev(dev) \ + tdev_to_device((dev)->parent) + +#define tdev_to_link(d) \ + container_of((d), struct ata_link, tdev) +#define transport_class_to_link(dev) \ + tdev_to_link((dev)->parent) + +#define tdev_to_port(d) \ + container_of((d), struct ata_port, tdev) +#define transport_class_to_port(dev) \ + tdev_to_port((dev)->parent) + + +/* Device objects are always created whit link objects */ +static int ata_tdev_add(struct ata_device *dev); +static void ata_tdev_delete(struct ata_device *dev); + + +/* + * Hack to allow attributes of the same name in different objects. + */ +#define ATA_DEVICE_ATTR(_prefix,_name,_mode,_show,_store) \ + struct device_attribute device_attr_##_prefix##_##_name = \ + __ATTR(_name,_mode,_show,_store) + +#define ata_bitfield_name_match(title, table) \ +static ssize_t \ +get_ata_##title##_names(u32 table_key, char *buf) \ +{ \ + char *prefix = ""; \ + ssize_t len = 0; \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(table); i++) { \ + if (table[i].value & table_key) { \ + len += sprintf(buf + len, "%s%s", \ + prefix, table[i].name); \ + prefix = ", "; \ + } \ + } \ + len += sprintf(buf + len, "\n"); \ + return len; \ +} + +#define ata_bitfield_name_search(title, table) \ +static ssize_t \ +get_ata_##title##_names(u32 table_key, char *buf) \ +{ \ + ssize_t len = 0; \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(table); i++) { \ + if (table[i].value == table_key) { \ + len += sprintf(buf + len, "%s", \ + table[i].name); \ + break; \ + } \ + } \ + len += sprintf(buf + len, "\n"); \ + return len; \ +} + +static struct { + u32 value; + char *name; +} ata_class_names[] = { + { ATA_DEV_UNKNOWN, "unknown" }, + { ATA_DEV_ATA, "ata" }, + { ATA_DEV_ATA_UNSUP, "ata" }, + { ATA_DEV_ATAPI, "atapi" }, + { ATA_DEV_ATAPI_UNSUP, "atapi" }, + { ATA_DEV_PMP, "pmp" }, + { ATA_DEV_PMP_UNSUP, "pmp" }, + { ATA_DEV_SEMB, "semb" }, + { ATA_DEV_SEMB_UNSUP, "semb" }, + { ATA_DEV_NONE, "none" } +}; +ata_bitfield_name_search(class, ata_class_names) + + +static struct { + u32 value; + char *name; +} ata_err_names[] = { + { AC_ERR_DEV, "DeviceError" }, + { AC_ERR_HSM, "HostStateMachineError" }, + { AC_ERR_TIMEOUT, "Timeout" }, + { AC_ERR_MEDIA, "MediaError" }, + { AC_ERR_ATA_BUS, "BusError" }, + { AC_ERR_HOST_BUS, "HostBusError" }, + { AC_ERR_SYSTEM, "SystemError" }, + { AC_ERR_INVALID, "InvalidArg" }, + { AC_ERR_OTHER, "Unknown" }, + { AC_ERR_NODEV_HINT, "NoDeviceHint" }, + { AC_ERR_NCQ, "NCQError" } +}; +ata_bitfield_name_match(err, ata_err_names) + +static struct { + u32 value; + char *name; +} ata_xfer_names[] = { + { XFER_UDMA_7, "XFER_UDMA_7" }, + { XFER_UDMA_6, "XFER_UDMA_6" }, + { XFER_UDMA_5, "XFER_UDMA_5" }, + { XFER_UDMA_4, "XFER_UDMA_4" }, + { XFER_UDMA_3, "XFER_UDMA_3" }, + { XFER_UDMA_2, "XFER_UDMA_2" }, + { XFER_UDMA_1, "XFER_UDMA_1" }, + { XFER_UDMA_0, "XFER_UDMA_0" }, + { XFER_MW_DMA_4, "XFER_MW_DMA_4" }, + { XFER_MW_DMA_3, "XFER_MW_DMA_3" }, + { XFER_MW_DMA_2, "XFER_MW_DMA_2" }, + { XFER_MW_DMA_1, "XFER_MW_DMA_1" }, + { XFER_MW_DMA_0, "XFER_MW_DMA_0" }, + { XFER_SW_DMA_2, "XFER_SW_DMA_2" }, + { XFER_SW_DMA_1, "XFER_SW_DMA_1" }, + { XFER_SW_DMA_0, "XFER_SW_DMA_0" }, + { XFER_PIO_6, "XFER_PIO_6" }, + { XFER_PIO_5, "XFER_PIO_5" }, + { XFER_PIO_4, "XFER_PIO_4" }, + { XFER_PIO_3, "XFER_PIO_3" }, + { XFER_PIO_2, "XFER_PIO_2" }, + { XFER_PIO_1, "XFER_PIO_1" }, + { XFER_PIO_0, "XFER_PIO_0" }, + { XFER_PIO_SLOW, "XFER_PIO_SLOW" } +}; +ata_bitfield_name_match(xfer,ata_xfer_names) + +/* + * ATA Port attributes + */ +#define ata_port_show_simple(field, name, format_string, cast) \ +static ssize_t \ +show_ata_port_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_port *ap = transport_class_to_port(dev); \ + \ + return snprintf(buf, 20, format_string, cast ap->field); \ +} + +#define ata_port_simple_attr(field, name, format_string, type) \ + ata_port_show_simple(field, name, format_string, (type)) \ +static DEVICE_ATTR(name, S_IRUGO, show_ata_port_##name, NULL) + +ata_port_simple_attr(nr_pmp_links, nr_pmp_links, "%d\n", int); +ata_port_simple_attr(stats.idle_irq, idle_irq, "%ld\n", unsigned long); + +static DECLARE_TRANSPORT_CLASS(ata_port_class, + "ata_port", NULL, NULL, NULL); + +static void ata_tport_release(struct device *dev) +{ + put_device(dev->parent); +} + +/** + * ata_is_port -- check if a struct device represents a ATA port + * @dev: device to check + * + * Returns: + * %1 if the device represents a ATA Port, %0 else + */ +int ata_is_port(const struct device *dev) +{ + return dev->release == ata_tport_release; +} + +static int ata_tport_match(struct attribute_container *cont, + struct device *dev) +{ + if (!ata_is_port(dev)) + return 0; + return &ata_scsi_transport_template->host_attrs.ac == cont; +} + +/** + * ata_tport_delete -- remove ATA PORT + * @port: ATA PORT to remove + * + * Removes the specified ATA PORT. Remove the associated link as well. + */ +void ata_tport_delete(struct ata_port *ap) +{ + struct device *dev = &ap->tdev; + + ata_tlink_delete(&ap->link); + + transport_remove_device(dev); + device_del(dev); + transport_destroy_device(dev); + put_device(dev); +} + +/** ata_tport_add - initialize a transport ATA port structure + * + * @parent: parent device + * @ap: existing ata_port structure + * + * Initialize a ATA port structure for sysfs. It will be added to the device + * tree below the device specified by @parent which could be a PCI device. + * + * Returns %0 on success + */ +int ata_tport_add(struct device *parent, + struct ata_port *ap) +{ + int error; + struct device *dev = &ap->tdev; + + device_initialize(dev); + + dev->parent = get_device(parent); + dev->release = ata_tport_release; + dev_set_name(dev, "ata%d", ap->print_id); + transport_setup_device(dev); + error = device_add(dev); + if (error) { + goto tport_err; + } + + transport_add_device(dev); + transport_configure_device(dev); + + error = ata_tlink_add(&ap->link); + if (error) { + goto tport_link_err; + } + return 0; + + tport_link_err: + transport_remove_device(dev); + device_del(dev); + + tport_err: + transport_destroy_device(dev); + put_device(dev); + return error; +} + + +/* + * ATA link attributes + */ + + +#define ata_link_show_linkspeed(field) \ +static ssize_t \ +show_ata_link_##field(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_link *link = transport_class_to_link(dev); \ + \ + return sprintf(buf,"%s\n", sata_spd_string(fls(link->field))); \ +} + +#define ata_link_linkspeed_attr(field) \ + ata_link_show_linkspeed(field) \ +static DEVICE_ATTR(field, S_IRUGO, show_ata_link_##field, NULL) + +ata_link_linkspeed_attr(hw_sata_spd_limit); +ata_link_linkspeed_attr(sata_spd_limit); +ata_link_linkspeed_attr(sata_spd); + + +static DECLARE_TRANSPORT_CLASS(ata_link_class, + "ata_link", NULL, NULL, NULL); + +static void ata_tlink_release(struct device *dev) +{ + put_device(dev->parent); +} + +/** + * ata_is_link -- check if a struct device represents a ATA link + * @dev: device to check + * + * Returns: + * %1 if the device represents a ATA link, %0 else + */ +int ata_is_link(const struct device *dev) +{ + return dev->release == ata_tlink_release; +} + +static int ata_tlink_match(struct attribute_container *cont, + struct device *dev) +{ + struct ata_internal* i = to_ata_internal(ata_scsi_transport_template); + if (!ata_is_link(dev)) + return 0; + return &i->link_attr_cont.ac == cont; +} + +/** + * ata_tlink_delete -- remove ATA LINK + * @port: ATA LINK to remove + * + * Removes the specified ATA LINK. remove associated ATA device(s) as well. + */ +void ata_tlink_delete(struct ata_link *link) +{ + struct device *dev = &link->tdev; + struct ata_device *ata_dev; + + ata_for_each_dev(ata_dev, link, ALL) { + ata_tdev_delete(ata_dev); + } + + transport_remove_device(dev); + device_del(dev); + transport_destroy_device(dev); + put_device(dev); +} + +/** + * ata_tlink_add -- initialize a transport ATA link structure + * @link: allocated ata_link structure. + * + * Initialize an ATA LINK structure for sysfs. It will be added in the + * device tree below the ATA PORT it belongs to. + * + * Returns %0 on success + */ +int ata_tlink_add(struct ata_link *link) +{ + struct device *dev = &link->tdev; + struct ata_port *ap = link->ap; + struct ata_device *ata_dev; + int error; + + device_initialize(dev); + dev->parent = get_device(&ap->tdev); + dev->release = ata_tlink_release; + if (ata_is_host_link(link)) + dev_set_name(dev, "link%d", ap->print_id); + else + dev_set_name(dev, "link%d.%d", ap->print_id, link->pmp); + + transport_setup_device(dev); + + error = device_add(dev); + if (error) { + goto tlink_err; + } + + transport_add_device(dev); + transport_configure_device(dev); + + ata_for_each_dev(ata_dev, link, ALL) { + error = ata_tdev_add(ata_dev); + if (error) { + goto tlink_dev_err; + } + } + return 0; + tlink_dev_err: + while (--ata_dev >= link->device) { + ata_tdev_delete(ata_dev); + } + transport_remove_device(dev); + device_del(dev); + tlink_err: + transport_destroy_device(dev); + put_device(dev); + return error; +} + +/* + * ATA device attributes + */ + +#define ata_dev_show_class(title, field) \ +static ssize_t \ +show_ata_dev_##field(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_device *ata_dev = transport_class_to_dev(dev); \ + \ + return get_ata_##title##_names(ata_dev->field, buf); \ +} + +#define ata_dev_attr(title, field) \ + ata_dev_show_class(title, field) \ +static DEVICE_ATTR(field, S_IRUGO, show_ata_dev_##field, NULL) + +ata_dev_attr(class, class); +ata_dev_attr(xfer, pio_mode); +ata_dev_attr(xfer, dma_mode); +ata_dev_attr(xfer, xfer_mode); + + +#define ata_dev_show_simple(field, format_string, cast) \ +static ssize_t \ +show_ata_dev_##field(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_device *ata_dev = transport_class_to_dev(dev); \ + \ + return snprintf(buf, 20, format_string, cast ata_dev->field); \ +} + +#define ata_dev_simple_attr(field, format_string, type) \ + ata_dev_show_simple(field, format_string, (type)) \ +static DEVICE_ATTR(field, S_IRUGO, \ + show_ata_dev_##field, NULL) + +ata_dev_simple_attr(spdn_cnt, "%d\n", int); + +struct ata_show_ering_arg { + char* buf; + int written; +}; + +static int ata_show_ering(struct ata_ering_entry *ent, void *void_arg) +{ + struct ata_show_ering_arg* arg = void_arg; + struct timespec time; + + jiffies_to_timespec(ent->timestamp,&time); + arg->written += sprintf(arg->buf + arg->written, + "[%5lu.%06lu]", + time.tv_sec, time.tv_nsec); + arg->written += get_ata_err_names(ent->err_mask, + arg->buf + arg->written); + return 0; +} + +static ssize_t +show_ata_dev_ering(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ata_device *ata_dev = transport_class_to_dev(dev); + struct ata_show_ering_arg arg = { buf, 0 }; + + ata_ering_map(&ata_dev->ering, ata_show_ering, &arg); + return arg.written; +} + + +static DEVICE_ATTR(ering, S_IRUGO, show_ata_dev_ering, NULL); + +static ssize_t +show_ata_dev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ata_device *ata_dev = transport_class_to_dev(dev); + int written = 0, i = 0; + + if (ata_dev->class == ATA_DEV_PMP) + return 0; + for(i=0;i<ATA_ID_WORDS;i++) { + written += snprintf(buf+written, 20, "%04x%c", + ata_dev->id[i], + ((i+1) & 7) ? ' ' : '\n'); + } + return written; +} + +static DEVICE_ATTR(id, S_IRUGO, show_ata_dev_id, NULL); + +static ssize_t +show_ata_dev_gscr(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ata_device *ata_dev = transport_class_to_dev(dev); + int written = 0, i = 0; + + if (ata_dev->class != ATA_DEV_PMP) + return 0; + for(i=0;i<SATA_PMP_GSCR_DWORDS;i++) { + written += snprintf(buf+written, 20, "%08x%c", + ata_dev->gscr[i], + ((i+1) & 3) ? ' ' : '\n'); + } + if (SATA_PMP_GSCR_DWORDS & 3) + buf[written-1] = '\n'; + return written; +} + +static DEVICE_ATTR(gscr, S_IRUGO, show_ata_dev_gscr, NULL); + +static DECLARE_TRANSPORT_CLASS(ata_dev_class, + "ata_device", NULL, NULL, NULL); + +static void ata_tdev_release(struct device *dev) +{ + put_device(dev->parent); +} + +/** + * ata_is_ata_dev -- check if a struct device represents a ATA device + * @dev: device to check + * + * Returns: + * %1 if the device represents a ATA device, %0 else + */ +int ata_is_ata_dev(const struct device *dev) +{ + return dev->release == ata_tdev_release; +} + +static int ata_tdev_match(struct attribute_container *cont, + struct device *dev) +{ + struct ata_internal* i = to_ata_internal(ata_scsi_transport_template); + if (!ata_is_ata_dev(dev)) + return 0; + return &i->dev_attr_cont.ac == cont; +} + +/** + * ata_tdev_free -- free a ATA LINK + * @dev: ATA PHY to free + * + * Frees the specified ATA PHY. + * + * Note: + * This function must only be called on a PHY that has not + * successfully been added using ata_tdev_add(). + */ +static void ata_tdev_free(struct ata_device *dev) +{ + transport_destroy_device(&dev->tdev); + put_device(&dev->tdev); +} + +/** + * ata_tdev_delete -- remove ATA device + * @port: ATA PORT to remove + * + * Removes the specified ATA device. + */ +static void ata_tdev_delete(struct ata_device *ata_dev) +{ + struct device *dev = &ata_dev->tdev; + + transport_remove_device(dev); + device_del(dev); + ata_tdev_free(ata_dev); +} + + +/** + * ata_tdev_add -- initialize a transport ATA device structure. + * @ata_dev: ata_dev structure. + * + * Initialize an ATA device structure for sysfs. It will be added in the + * device tree below the ATA LINK device it belongs to. + * + * Returns %0 on success + */ +static int ata_tdev_add(struct ata_device *ata_dev) +{ + struct device *dev = &ata_dev->tdev; + struct ata_link *link = ata_dev->link; + struct ata_port *ap = link->ap; + int error; + + device_initialize(dev); + dev->parent = get_device(&link->tdev); + dev->release = ata_tdev_release; + if (ata_is_host_link(link)) + dev_set_name(dev, "dev%d.%d", ap->print_id,ata_dev->devno); + else + dev_set_name(dev, "dev%d.%d.0", ap->print_id, link->pmp); + + transport_setup_device(dev); + error = device_add(dev); + if (error) { + ata_tdev_free(ata_dev); + return error; + } + + transport_add_device(dev); + transport_configure_device(dev); + return 0; +} + + +/* + * Setup / Teardown code + */ + +#define SETUP_TEMPLATE(attrb, field, perm, test) \ + i->private_##attrb[count] = dev_attr_##field; \ + i->private_##attrb[count].attr.mode = perm; \ + i->attrb[count] = &i->private_##attrb[count]; \ + if (test) \ + count++ + +#define SETUP_LINK_ATTRIBUTE(field) \ + SETUP_TEMPLATE(link_attrs, field, S_IRUGO, 1) + +#define SETUP_PORT_ATTRIBUTE(field) \ + SETUP_TEMPLATE(port_attrs, field, S_IRUGO, 1) + +#define SETUP_DEV_ATTRIBUTE(field) \ + SETUP_TEMPLATE(dev_attrs, field, S_IRUGO, 1) + +/** + * ata_attach_transport -- instantiate ATA transport template + */ +struct scsi_transport_template *ata_attach_transport(void) +{ + struct ata_internal *i; + int count; + + i = kzalloc(sizeof(struct ata_internal), GFP_KERNEL); + if (!i) + return NULL; + + i->t.eh_strategy_handler = ata_scsi_error; + i->t.eh_timed_out = ata_scsi_timed_out; + i->t.user_scan = ata_scsi_user_scan; + + i->t.host_attrs.ac.attrs = &i->port_attrs[0]; + i->t.host_attrs.ac.class = &ata_port_class.class; + i->t.host_attrs.ac.match = ata_tport_match; + transport_container_register(&i->t.host_attrs); + + i->link_attr_cont.ac.class = &ata_link_class.class; + i->link_attr_cont.ac.attrs = &i->link_attrs[0]; + i->link_attr_cont.ac.match = ata_tlink_match; + transport_container_register(&i->link_attr_cont); + + i->dev_attr_cont.ac.class = &ata_dev_class.class; + i->dev_attr_cont.ac.attrs = &i->dev_attrs[0]; + i->dev_attr_cont.ac.match = ata_tdev_match; + transport_container_register(&i->dev_attr_cont); + + count = 0; + SETUP_PORT_ATTRIBUTE(nr_pmp_links); + SETUP_PORT_ATTRIBUTE(idle_irq); + BUG_ON(count > ATA_PORT_ATTRS); + i->port_attrs[count] = NULL; + + count = 0; + SETUP_LINK_ATTRIBUTE(hw_sata_spd_limit); + SETUP_LINK_ATTRIBUTE(sata_spd_limit); + SETUP_LINK_ATTRIBUTE(sata_spd); + BUG_ON(count > ATA_LINK_ATTRS); + i->link_attrs[count] = NULL; + + count = 0; + SETUP_DEV_ATTRIBUTE(class); + SETUP_DEV_ATTRIBUTE(pio_mode); + SETUP_DEV_ATTRIBUTE(dma_mode); + SETUP_DEV_ATTRIBUTE(xfer_mode); + SETUP_DEV_ATTRIBUTE(spdn_cnt); + SETUP_DEV_ATTRIBUTE(ering); + SETUP_DEV_ATTRIBUTE(id); + SETUP_DEV_ATTRIBUTE(gscr); + BUG_ON(count > ATA_DEV_ATTRS); + i->dev_attrs[count] = NULL; + + return &i->t; +} + +/** + * ata_release_transport -- release ATA transport template instance + * @t: transport template instance + */ +void ata_release_transport(struct scsi_transport_template *t) +{ + struct ata_internal *i = to_ata_internal(t); + + transport_container_unregister(&i->t.host_attrs); + transport_container_unregister(&i->link_attr_cont); + transport_container_unregister(&i->dev_attr_cont); + + kfree(i); +} + +__init int libata_transport_init(void) +{ + int error; + + error = transport_class_register(&ata_link_class); + if (error) + goto out_unregister_transport; + error = transport_class_register(&ata_port_class); + if (error) + goto out_unregister_link; + error = transport_class_register(&ata_dev_class); + if (error) + goto out_unregister_port; + return 0; + + out_unregister_port: + transport_class_unregister(&ata_port_class); + out_unregister_link: + transport_class_unregister(&ata_link_class); + out_unregister_transport: + return error; + +} + +void __exit libata_transport_exit(void) +{ + transport_class_unregister(&ata_link_class); + transport_class_unregister(&ata_port_class); + transport_class_unregister(&ata_dev_class); +} diff --git a/drivers/ata/libata-transport.h b/drivers/ata/libata-transport.h new file mode 100644 index 000000000000..2820cf864f11 --- /dev/null +++ b/drivers/ata/libata-transport.h @@ -0,0 +1,18 @@ +#ifndef _LIBATA_TRANSPORT_H +#define _LIBATA_TRANSPORT_H + + +extern struct scsi_transport_template *ata_scsi_transport_template; + +int ata_tlink_add(struct ata_link *link); +void ata_tlink_delete(struct ata_link *link); + +int ata_tport_add(struct device *parent, struct ata_port *ap); +void ata_tport_delete(struct ata_port *ap); + +struct scsi_transport_template *ata_attach_transport(void); +void ata_release_transport(struct scsi_transport_template *t); + +__init int libata_transport_init(void); +void __exit libata_transport_exit(void); +#endif diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 9ce1ecc63e39..a9be110dbf51 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -86,6 +86,8 @@ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); +extern unsigned int ata_dev_set_feature(struct ata_device *dev, + u8 enable, u8 feature); extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); @@ -100,8 +102,7 @@ extern int sata_link_init_spd(struct ata_link *link); extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); extern struct ata_port *ata_port_alloc(struct ata_host *host); -extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy); -extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm); +extern const char *sata_spd_string(unsigned int spd); /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI @@ -137,10 +138,15 @@ extern void ata_scsi_hotplug(struct work_struct *work); extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); extern void ata_scsi_dev_rescan(struct work_struct *work); extern int ata_bus_probe(struct ata_port *ap); +extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun); + /* libata-eh.c */ extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); extern void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd); +extern void ata_eh_acquire(struct ata_port *ap); +extern void ata_eh_release(struct ata_port *ap); extern enum blk_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); extern void ata_scsi_error(struct Scsi_Host *host); extern void ata_port_wait_eh(struct ata_port *ap); @@ -164,11 +170,16 @@ extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, ata_postreset_fn_t postreset, struct ata_link **r_failed_disk); extern void ata_eh_finish(struct ata_port *ap); +extern int ata_ering_map(struct ata_ering *ering, + int (*map_fn)(struct ata_ering_entry *, void *), + void *arg); /* libata-pmp.c */ #ifdef CONFIG_SATA_PMP extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val); extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val); +extern int sata_pmp_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); extern int sata_pmp_attach(struct ata_device *dev); #else /* CONFIG_SATA_PMP */ static inline int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val) @@ -181,6 +192,12 @@ static inline int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val) return -EINVAL; } +static inline int sata_pmp_set_lpm(struct ata_link *link, + enum ata_lpm_policy policy, unsigned hints) +{ + return -EINVAL; +} + static inline int sata_pmp_attach(struct ata_device *dev) { return -EINVAL; diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 9cae65de750e..ec2c777fcdb0 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -826,7 +826,7 @@ static void bfin_dev_select(struct ata_port *ap, unsigned int device) * @ctl: value to write */ -static u8 bfin_set_devctl(struct ata_port *ap, u8 ctl) +static void bfin_set_devctl(struct ata_port *ap, u8 ctl) { void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; write_atapi_register(base, ATA_REG_CTRL, ctl); @@ -1046,7 +1046,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) dev1 = 0; break; } - msleep(50); /* give drive a breather */ + ata_msleep(ap, 50); /* give drive a breather */ } if (dev1) ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); @@ -1087,7 +1087,7 @@ static unsigned int bfin_bus_softreset(struct ata_port *ap, * * Old drivers/ide uses the 2mS rule and then waits for ready */ - msleep(150); + ata_msleep(ap, 150); /* Before we perform post reset processing we want to see if * the bus shows 0xFF because the odd clown forgets the D7 diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index e5f289f59ca3..549d28dbf90d 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -161,6 +161,17 @@ static int cmd640_port_start(struct ata_port *ap) return 0; } +static bool cmd640_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int irq_reg = ap->port_no ? ARTIM23 : CFR; + u8 irq_stat, irq_mask = ap->port_no ? 0x10 : 0x04; + + pci_read_config_byte(pdev, irq_reg, &irq_stat); + + return irq_stat & irq_mask; +} + static struct scsi_host_template cmd640_sht = { ATA_PIO_SHT(DRV_NAME), }; @@ -169,6 +180,7 @@ static struct ata_port_operations cmd640_port_ops = { .inherits = &ata_sff_port_ops, /* In theory xfer_noirq is not needed once we kill the prefetcher */ .sff_data_xfer = ata_sff_data_xfer_noirq, + .sff_irq_check = cmd640_sff_irq_check, .qc_issue = cmd640_qc_issue, .cable_detect = ata_cable_40wire, .set_piomode = cmd640_set_piomode, diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index e944aa0c5517..806292160b3f 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -34,7 +34,6 @@ #include <linux/ata.h> #include <linux/libata.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/cisreg.h> @@ -168,63 +167,26 @@ static struct ata_port_operations pcmcia_8bit_port_ops = { }; -struct pcmcia_config_check { - unsigned long ctl_base; - int skip_vcc; - int is_kme; -}; - -static int pcmcia_check_one_config(struct pcmcia_device *pdev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) { - struct pcmcia_config_check *stk = priv_data; - - /* Check for matching Vcc, unless we're desperate */ - if (!stk->skip_vcc) { - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } + int *is_kme = priv_data; + + if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; } + pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - pdev->resource[0]->start = io->win[0].base; - if (!(io->flags & CISTPL_IO_16BIT)) { - pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - } - if (io->nwin == 2) { - pdev->resource[0]->end = 8; - pdev->resource[1]->start = io->win[1].base; - pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[1]->start; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->resource[0]->end = io->win[0].len; - pdev->resource[1]->end = 0; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[0]->start + 0x0e; - } else + if (pdev->resource[1]->end) { + pdev->resource[0]->end = 8; + pdev->resource[1]->end = (*is_kme) ? 2 : 1; + } else { + if (pdev->resource[0]->end < 16) return -ENODEV; - /* If we've got this far, we're done */ - return 0; } - return -ENODEV; + + return pcmcia_request_io(pdev); } /** @@ -239,7 +201,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) { struct ata_host *host; struct ata_port *ap; - struct pcmcia_config_check *stk = NULL; int is_kme = 0, ret = -ENOMEM, p; unsigned long io_base, ctl_base; void __iomem *io_addr, *ctl_addr; @@ -247,10 +208,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) struct ata_port_operations *ops = &pcmcia_port_ops; /* Set up attributes in order to probe card and get resources */ - pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - pdev->conf.Attributes = CONF_ENABLE_IRQ; - pdev->conf.IntType = INT_MEMORY_AND_IO; + pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; /* See if we have a manufacturer identifier. Use it to set is_kme for vendor quirks */ @@ -258,25 +217,21 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) ((pdev->card_id == PRODID_KME_KXLC005_A) || (pdev->card_id == PRODID_KME_KXLC005_B))); - /* Allocate resoure probing structures */ - - stk = kzalloc(sizeof(*stk), GFP_KERNEL); - if (!stk) - goto out1; - stk->is_kme = is_kme; - stk->skip_vcc = io_base = ctl_base = 0; - - if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) { - stk->skip_vcc = 1; - if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme)) { + pdev->config_flags &= ~CONF_AUTO_CHECK_VCC; + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme)) goto failed; /* No suitable config found */ } io_base = pdev->resource[0]->start; - ctl_base = stk->ctl_base; + if (pdev->resource[1]->end) + ctl_base = pdev->resource[1]->start; + else + ctl_base = pdev->resource[0]->start + 0x0e; + if (!pdev->irq) goto failed; - ret = pcmcia_request_configuration(pdev, &pdev->conf); + ret = pcmcia_enable_device(pdev); if (ret) goto failed; @@ -329,13 +284,10 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) goto failed; pdev->priv = host; - kfree(stk); return 0; failed: - kfree(stk); pcmcia_disable_device(pdev); -out1: return ret; } @@ -430,9 +382,7 @@ MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices); static struct pcmcia_driver pcmcia_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRV_NAME, - }, + .name = DRV_NAME, .id_table = pcmcia_devices, .probe = pcmcia_init_one, .remove = pcmcia_remove_one, diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index c39f213e1bbc..c2ed5868dda6 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -44,6 +44,27 @@ static void pdc202xx_exec_command(struct ata_port *ap, ndelay(400); } +static bool pdc202xx_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long master = pci_resource_start(pdev, 4); + u8 sc1d = inb(master + 0x1d); + + if (ap->port_no) { + /* + * bit 7: error, bit 6: interrupting, + * bit 5: FIFO full, bit 4: FIFO empty + */ + return sc1d & 0x40; + } else { + /* + * bit 3: error, bit 2: interrupting, + * bit 1: FIFO full, bit 0: FIFO empty + */ + return sc1d & 0x04; + } +} + /** * pdc202xx_configure_piomode - set chip PIO timing * @ap: ATA interface @@ -282,6 +303,7 @@ static struct ata_port_operations pdc2024x_port_ops = { .set_dmamode = pdc202xx_set_dmamode, .sff_exec_command = pdc202xx_exec_command, + .sff_irq_check = pdc202xx_irq_check, }; static struct ata_port_operations pdc2026x_port_ops = { @@ -297,6 +319,7 @@ static struct ata_port_operations pdc2026x_port_ops = { .port_start = pdc2026x_port_start, .sff_exec_command = pdc202xx_exec_command, + .sff_irq_check = pdc202xx_irq_check, }; static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c index 6f9cfb24b751..8a51d673e5b2 100644 --- a/drivers/ata/pata_samsung_cf.c +++ b/drivers/ata/pata_samsung_cf.c @@ -322,7 +322,7 @@ static int pata_s3c_wait_after_reset(struct ata_link *link, { int rc; - msleep(ATA_WAIT_AFTER_RESET); + ata_msleep(link->ap, ATA_WAIT_AFTER_RESET); /* always check readiness of the master device */ rc = ata_sff_wait_ready(link, deadline); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index fe36966f7e34..093715c3273a 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -530,7 +530,7 @@ static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask, * * Old drivers/ide uses the 2mS rule and then waits for ready. */ - msleep(150); + ata_msleep(ap, 150); /* always check readiness of the master device */ rc = ata_sff_wait_ready(link, deadline); @@ -559,7 +559,7 @@ static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask, lbal = in_be32(ioaddr->lbal_addr); if ((nsect == 1) && (lbal == 1)) break; - msleep(50); /* give drive a breather */ + ata_msleep(ap, 50); /* give drive a breather */ } rc = ata_sff_wait_ready(link, deadline); diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index d3190d7ec304..00eefbd84b33 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -202,14 +202,25 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev) * LOCKING: * spin_lock_irqsave(host lock) */ -void sil680_sff_exec_command(struct ata_port *ap, - const struct ata_taskfile *tf) +static void sil680_sff_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) { DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); iowrite8(tf->command, ap->ioaddr.command_addr); ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); } +static bool sil680_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long addr = sil680_selreg(ap, 1); + u8 val; + + pci_read_config_byte(pdev, addr, &val); + + return val & 0x08; +} + static struct scsi_host_template sil680_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -218,6 +229,7 @@ static struct scsi_host_template sil680_sht = { static struct ata_port_operations sil680_port_ops = { .inherits = &ata_bmdma32_port_ops, .sff_exec_command = sil680_sff_exec_command, + .sff_irq_check = sil680_sff_irq_check, .cable_detect = sil680_cable_detect, .set_piomode = sil680_set_piomode, .set_dmamode = sil680_set_dmamode, diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 98548f640c8e..7f5d020ed56c 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -227,6 +227,16 @@ static int sl82c105_qc_defer(struct ata_queued_cmd *qc) return 0; } +static bool sl82c105_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 val, mask = ap->port_no ? CTRL_IDE_IRQB : CTRL_IDE_IRQA; + + pci_read_config_dword(pdev, 0x40, &val); + + return val & mask; +} + static struct scsi_host_template sl82c105_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -239,6 +249,7 @@ static struct ata_port_operations sl82c105_port_ops = { .cable_detect = ata_cable_40wire, .set_piomode = sl82c105_set_piomode, .prereset = sl82c105_pre_reset, + .sff_irq_check = sl82c105_sff_irq_check, }; /** diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 7325f77480dc..b0214d00d50b 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -678,7 +678,7 @@ static void sata_fsl_port_stop(struct ata_port *ap) iowrite32(temp, hcr_base + HCONTROL); /* Poll for controller to go offline - should happen immediately */ - ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1); + ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1); ap->private_data = NULL; dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, @@ -729,7 +729,8 @@ try_offline_again: iowrite32(temp, hcr_base + HCONTROL); /* Poll for controller to go offline */ - temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 500); + temp = ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, ONLINE, + 1, 500); if (temp & ONLINE) { ata_port_printk(ap, KERN_ERR, @@ -752,7 +753,7 @@ try_offline_again: /* * PHY reset should remain asserted for atleast 1ms */ - msleep(1); + ata_msleep(ap, 1); /* * Now, bring the host controller online again, this can take time @@ -766,7 +767,7 @@ try_offline_again: temp |= HCONTROL_PMP_ATTACHED; iowrite32(temp, hcr_base + HCONTROL); - temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500); + temp = ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, 0, 1, 500); if (!(temp & ONLINE)) { ata_port_printk(ap, KERN_ERR, @@ -784,7 +785,7 @@ try_offline_again: * presence */ - temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500); + temp = ata_wait_register(ap, hcr_base + HSTATUS, 0xFF, 0, 1, 500); if ((!(temp & 0x10)) || ata_link_offline(link)) { ata_port_printk(ap, KERN_WARNING, "No Device OR PHYRDY change,Hstatus = 0x%x\n", @@ -797,7 +798,7 @@ try_offline_again: * Wait for the first D2H from device,i.e,signature update notification */ start_jiffies = jiffies; - temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0x10, + temp = ata_wait_register(ap, hcr_base + HSTATUS, 0xFF, 0x10, 500, jiffies_to_msecs(deadline - start_jiffies)); if ((temp & 0xFF) != 0x18) { @@ -880,7 +881,7 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, iowrite32(pmp, CQPMP + hcr_base); iowrite32(1, CQ + hcr_base); - temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000); + temp = ata_wait_register(ap, CQ + hcr_base, 0x1, 0x1, 1, 5000); if (temp & 0x1) { ata_port_printk(ap, KERN_WARNING, "ATA_SRST issue failed\n"); @@ -896,7 +897,7 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, goto err; } - msleep(1); + ata_msleep(ap, 1); /* * SATA device enters reset state after receving a Control register @@ -915,7 +916,7 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, if (pmp != SATA_PMP_CTRL_PORT) iowrite32(pmp, CQPMP + hcr_base); iowrite32(1, CQ + hcr_base); - msleep(150); /* ?? */ + ata_msleep(ap, 150); /* ?? */ /* * The above command would have signalled an interrupt on command @@ -1137,17 +1138,13 @@ static void sata_fsl_host_intr(struct ata_port *ap) ioread32(hcr_base + CE)); for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) { - if (done_mask & (1 << i)) { - qc = ata_qc_from_tag(ap, i); - if (qc) { - ata_qc_complete(qc); - } + if (done_mask & (1 << i)) DPRINTK ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n", i, ioread32(hcr_base + CC), ioread32(hcr_base + CA)); - } } + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); return; } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) { diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index a36149ebf4a2..83a44471b189 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -614,7 +614,7 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class, writew(IDMA_CTL_RST_ATA, idma_ctl); readw(idma_ctl); /* flush */ - msleep(1); + ata_msleep(ap, 1); writew(0, idma_ctl); rc = sata_link_resume(link, timing, deadline); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index a9fd9709c262..bf74a36d3cc3 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2743,18 +2743,11 @@ static void mv_err_intr(struct ata_port *ap) } } -static void mv_process_crpb_response(struct ata_port *ap, +static bool mv_process_crpb_response(struct ata_port *ap, struct mv_crpb *response, unsigned int tag, int ncq_enabled) { u8 ata_status; u16 edma_status = le16_to_cpu(response->flags); - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); - - if (unlikely(!qc)) { - ata_port_printk(ap, KERN_ERR, "%s: no qc for tag=%d\n", - __func__, tag); - return; - } /* * edma_status from a response queue entry: @@ -2768,13 +2761,14 @@ static void mv_process_crpb_response(struct ata_port *ap, * Error will be seen/handled by * mv_err_intr(). So do nothing at all here. */ - return; + return false; } } ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT; if (!ac_err_mask(ata_status)) - ata_qc_complete(qc); + return true; /* else: leave it for mv_err_intr() */ + return false; } static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp) @@ -2783,6 +2777,7 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp struct mv_host_priv *hpriv = ap->host->private_data; u32 in_index; bool work_done = false; + u32 done_mask = 0; int ncq_enabled = (pp->pp_flags & MV_PP_FLAG_NCQ_EN); /* Get the hardware queue position index */ @@ -2803,15 +2798,19 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp /* Gen II/IIE: get command tag from CRPB entry */ tag = le16_to_cpu(response->id) & 0x1f; } - mv_process_crpb_response(ap, response, tag, ncq_enabled); + if (mv_process_crpb_response(ap, response, tag, ncq_enabled)) + done_mask |= 1 << tag; work_done = true; } - /* Update the software queue position index in hardware */ - if (work_done) + if (work_done) { + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + + /* Update the software queue position index in hardware */ writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | (pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT), port_mmio + EDMA_RSP_Q_OUT_PTR); + } } static void mv_port_intr(struct ata_port *ap, u32 port_cause) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index cb89ef8d99d9..7254e255fd78 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -873,29 +873,11 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err) ata_port_freeze(ap); else ata_port_abort(ap); - return 1; + return -1; } - if (likely(flags & NV_CPB_RESP_DONE)) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, cpb_num); - VPRINTK("CPB flags done, flags=0x%x\n", flags); - if (likely(qc)) { - DPRINTK("Completing qc from tag %d\n", cpb_num); - ata_qc_complete(qc); - } else { - struct ata_eh_info *ehi = &ap->link.eh_info; - /* Notifier bits set without a command may indicate the drive - is misbehaving. Raise host state machine violation on this - condition. */ - ata_port_printk(ap, KERN_ERR, - "notifier for tag %d with no cmd?\n", - cpb_num); - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_RESET; - ata_port_freeze(ap); - return 1; - } - } + if (likely(flags & NV_CPB_RESP_DONE)) + return 1; return 0; } @@ -1018,6 +1000,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) NV_ADMA_STAT_CPBERR | NV_ADMA_STAT_CMD_COMPLETE)) { u32 check_commands = notifier_clears[i]; + u32 done_mask = 0; int pos, rc; if (status & NV_ADMA_STAT_CPBERR) { @@ -1034,10 +1017,13 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) pos--; rc = nv_adma_check_cpb(ap, pos, notifier_error & (1 << pos)); - if (unlikely(rc)) + if (rc > 0) + done_mask |= 1 << pos; + else if (unlikely(rc < 0)) check_commands = 0; check_commands &= ~(1 << pos); } + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); } } @@ -2132,7 +2118,6 @@ static int nv_swncq_sdbfis(struct ata_port *ap) struct ata_eh_info *ehi = &ap->link.eh_info; u32 sactive; u32 done_mask; - int i; u8 host_stat; u8 lack_dhfis = 0; @@ -2152,27 +2137,11 @@ static int nv_swncq_sdbfis(struct ata_port *ap) sactive = readl(pp->sactive_block); done_mask = pp->qc_active ^ sactive; - if (unlikely(done_mask & sactive)) { - ata_ehi_clear_desc(ehi); - ata_ehi_push_desc(ehi, "illegal SWNCQ:qc_active transition" - "(%08x->%08x)", pp->qc_active, sactive); - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_RESET; - return -EINVAL; - } - for (i = 0; i < ATA_MAX_QUEUE; i++) { - if (!(done_mask & (1 << i))) - continue; - - qc = ata_qc_from_tag(ap, i); - if (qc) { - ata_qc_complete(qc); - pp->qc_active &= ~(1 << i); - pp->dhfis_bits &= ~(1 << i); - pp->dmafis_bits &= ~(1 << i); - pp->sdbfis_bits |= (1 << i); - } - } + pp->qc_active &= ~done_mask; + pp->dhfis_bits &= ~done_mask; + pp->dmafis_bits &= ~done_mask; + pp->sdbfis_bits |= done_mask; + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); if (!ap->qc_active) { DPRINTK("over\n"); diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index be7726d7686d..af41c6fd1254 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -589,9 +589,9 @@ static int sil24_init_port(struct ata_port *ap) sil24_clear_pmp(ap); writel(PORT_CS_INIT, port + PORT_CTRL_STAT); - ata_wait_register(port + PORT_CTRL_STAT, + ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_INIT, PORT_CS_INIT, 10, 100); - tmp = ata_wait_register(port + PORT_CTRL_STAT, + tmp = ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_RDY, 0, 10, 100); if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) { @@ -631,7 +631,7 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp, writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; - irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask, 0x0, + irq_stat = ata_wait_register(ap, port + PORT_IRQ_STAT, irq_mask, 0x0, 10, timeout_msec); writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */ @@ -719,9 +719,9 @@ static int sil24_hardreset(struct ata_link *link, unsigned int *class, "state, performing PORT_RST\n"); writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT); - msleep(10); + ata_msleep(ap, 10); writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); - ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_RDY, 0, + ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_RDY, 0, 10, 5000); /* restore port configuration */ @@ -740,7 +740,7 @@ static int sil24_hardreset(struct ata_link *link, unsigned int *class, tout_msec = 5000; writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); - tmp = ata_wait_register(port + PORT_CTRL_STAT, + tmp = ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec); @@ -1253,7 +1253,7 @@ static void sil24_init_controller(struct ata_host *host) tmp = readl(port + PORT_CTRL_STAT); if (tmp & PORT_CS_PORT_RST) { writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); - tmp = ata_wait_register(port + PORT_CTRL_STAT, + tmp = ata_wait_register(NULL, port + PORT_CTRL_STAT, PORT_CS_PORT_RST, PORT_CS_PORT_RST, 10, 100); if (tmp & PORT_CS_PORT_RST) diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 4730c42a5ee5..c21589986c69 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -349,7 +349,7 @@ static int vt6420_prereset(struct ata_link *link, unsigned long deadline) /* wait for phy to become ready, if necessary */ do { - msleep(200); + ata_msleep(link->ap, 200); svia_scr_read(link, SCR_STATUS, &sstatus); if ((sstatus & 0xf) != 1) break; diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile index cbccf9a3cee4..abe46edfe5b4 100644 --- a/drivers/base/power/Makefile +++ b/drivers/base/power/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_PM_SLEEP) += main.o wakeup.o obj-$(CONFIG_PM_RUNTIME) += runtime.o obj-$(CONFIG_PM_OPS) += generic_ops.o obj-$(CONFIG_PM_TRACE_RTC) += trace.o +obj-$(CONFIG_PM_OPP) += opp.o ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG ccflags-$(CONFIG_PM_VERBOSE) += -DDEBUG diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c index 4b29d4981253..81f2c84697f4 100644 --- a/drivers/base/power/generic_ops.c +++ b/drivers/base/power/generic_ops.c @@ -46,7 +46,7 @@ int pm_generic_runtime_suspend(struct device *dev) const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int ret; - ret = pm && pm->runtime_suspend ? pm->runtime_suspend(dev) : -EINVAL; + ret = pm && pm->runtime_suspend ? pm->runtime_suspend(dev) : 0; return ret; } @@ -65,7 +65,7 @@ int pm_generic_runtime_resume(struct device *dev) const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int ret; - ret = pm && pm->runtime_resume ? pm->runtime_resume(dev) : -EINVAL; + ret = pm && pm->runtime_resume ? pm->runtime_resume(dev) : 0; return ret; } diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 276d5a701dc3..31b526661ec4 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -51,6 +51,8 @@ static pm_message_t pm_transition; */ static bool transition_started; +static int async_error; + /** * device_pm_init - Initialize the PM-related part of a device object. * @dev: Device object being initialized. @@ -60,7 +62,8 @@ void device_pm_init(struct device *dev) dev->power.status = DPM_ON; init_completion(&dev->power.completion); complete_all(&dev->power.completion); - dev->power.wakeup_count = 0; + dev->power.wakeup = NULL; + spin_lock_init(&dev->power.lock); pm_runtime_init(dev); } @@ -120,6 +123,7 @@ void device_pm_remove(struct device *dev) mutex_lock(&dpm_list_mtx); list_del_init(&dev->power.entry); mutex_unlock(&dpm_list_mtx); + device_wakeup_disable(dev); pm_runtime_remove(dev); } @@ -407,7 +411,7 @@ static void pm_dev_err(struct device *dev, pm_message_t state, char *info, static void dpm_show_time(ktime_t starttime, pm_message_t state, char *info) { ktime_t calltime; - s64 usecs64; + u64 usecs64; int usecs; calltime = ktime_get(); @@ -600,6 +604,7 @@ static void dpm_resume(pm_message_t state) INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); pm_transition = state; + async_error = 0; list_for_each_entry(dev, &dpm_list, power.entry) { if (dev->power.status < DPM_OFF) @@ -829,8 +834,6 @@ static int legacy_suspend(struct device *dev, pm_message_t state, return error; } -static int async_error; - /** * device_suspend - Execute "suspend" callbacks for given device. * @dev: Device to handle. @@ -885,6 +888,9 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) device_unlock(dev); complete_all(&dev->power.completion); + if (error) + async_error = error; + return error; } @@ -894,10 +900,8 @@ static void async_suspend(void *data, async_cookie_t cookie) int error; error = __device_suspend(dev, pm_transition, true); - if (error) { + if (error) pm_dev_err(dev, pm_transition, " async", error); - async_error = error; - } put_device(dev); } @@ -1085,8 +1089,9 @@ EXPORT_SYMBOL_GPL(__suspend_report_result); * @dev: Device to wait for. * @subordinate: Device that needs to wait for @dev. */ -void device_pm_wait_for_dev(struct device *subordinate, struct device *dev) +int device_pm_wait_for_dev(struct device *subordinate, struct device *dev) { dpm_wait(dev, subordinate->power.async_suspend); + return async_error; } EXPORT_SYMBOL_GPL(device_pm_wait_for_dev); diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c new file mode 100644 index 000000000000..2bb9b4cf59d7 --- /dev/null +++ b/drivers/base/power/opp.c @@ -0,0 +1,628 @@ +/* + * Generic OPP Interface + * + * Copyright (C) 2009-2010 Texas Instruments Incorporated. + * Nishanth Menon + * Romit Dasgupta + * Kevin Hilman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> +#include <linux/list.h> +#include <linux/rculist.h> +#include <linux/rcupdate.h> +#include <linux/opp.h> + +/* + * Internal data structure organization with the OPP layer library is as + * follows: + * dev_opp_list (root) + * |- device 1 (represents voltage domain 1) + * | |- opp 1 (availability, freq, voltage) + * | |- opp 2 .. + * ... ... + * | `- opp n .. + * |- device 2 (represents the next voltage domain) + * ... + * `- device m (represents mth voltage domain) + * device 1, 2.. are represented by dev_opp structure while each opp + * is represented by the opp structure. + */ + +/** + * struct opp - Generic OPP description structure + * @node: opp list node. The nodes are maintained throughout the lifetime + * of boot. It is expected only an optimal set of OPPs are + * added to the library by the SoC framework. + * RCU usage: opp list is traversed with RCU locks. node + * modification is possible realtime, hence the modifications + * are protected by the dev_opp_list_lock for integrity. + * IMPORTANT: the opp nodes should be maintained in increasing + * order. + * @available: true/false - marks if this OPP as available or not + * @rate: Frequency in hertz + * @u_volt: Nominal voltage in microvolts corresponding to this OPP + * @dev_opp: points back to the device_opp struct this opp belongs to + * + * This structure stores the OPP information for a given device. + */ +struct opp { + struct list_head node; + + bool available; + unsigned long rate; + unsigned long u_volt; + + struct device_opp *dev_opp; +}; + +/** + * struct device_opp - Device opp structure + * @node: list node - contains the devices with OPPs that + * have been registered. Nodes once added are not modified in this + * list. + * RCU usage: nodes are not modified in the list of device_opp, + * however addition is possible and is secured by dev_opp_list_lock + * @dev: device pointer + * @opp_list: list of opps + * + * This is an internal data structure maintaining the link to opps attached to + * a device. This structure is not meant to be shared to users as it is + * meant for book keeping and private to OPP library + */ +struct device_opp { + struct list_head node; + + struct device *dev; + struct list_head opp_list; +}; + +/* + * The root of the list of all devices. All device_opp structures branch off + * from here, with each device_opp containing the list of opp it supports in + * various states of availability. + */ +static LIST_HEAD(dev_opp_list); +/* Lock to allow exclusive modification to the device and opp lists */ +static DEFINE_MUTEX(dev_opp_list_lock); + +/** + * find_device_opp() - find device_opp struct using device pointer + * @dev: device pointer used to lookup device OPPs + * + * Search list of device OPPs for one containing matching device. Does a RCU + * reader operation to grab the pointer needed. + * + * Returns pointer to 'struct device_opp' if found, otherwise -ENODEV or + * -EINVAL based on type of error. + * + * Locking: This function must be called under rcu_read_lock(). device_opp + * is a RCU protected pointer. This means that device_opp is valid as long + * as we are under RCU lock. + */ +static struct device_opp *find_device_opp(struct device *dev) +{ + struct device_opp *tmp_dev_opp, *dev_opp = ERR_PTR(-ENODEV); + + if (unlikely(IS_ERR_OR_NULL(dev))) { + pr_err("%s: Invalid parameters\n", __func__); + return ERR_PTR(-EINVAL); + } + + list_for_each_entry_rcu(tmp_dev_opp, &dev_opp_list, node) { + if (tmp_dev_opp->dev == dev) { + dev_opp = tmp_dev_opp; + break; + } + } + + return dev_opp; +} + +/** + * opp_get_voltage() - Gets the voltage corresponding to an available opp + * @opp: opp for which voltage has to be returned for + * + * Return voltage in micro volt corresponding to the opp, else + * return 0 + * + * Locking: This function must be called under rcu_read_lock(). opp is a rcu + * protected pointer. This means that opp which could have been fetched by + * opp_find_freq_{exact,ceil,floor} functions is valid as long as we are + * under RCU lock. The pointer returned by the opp_find_freq family must be + * used in the same section as the usage of this function with the pointer + * prior to unlocking with rcu_read_unlock() to maintain the integrity of the + * pointer. + */ +unsigned long opp_get_voltage(struct opp *opp) +{ + struct opp *tmp_opp; + unsigned long v = 0; + + tmp_opp = rcu_dereference(opp); + if (unlikely(IS_ERR_OR_NULL(tmp_opp)) || !tmp_opp->available) + pr_err("%s: Invalid parameters\n", __func__); + else + v = tmp_opp->u_volt; + + return v; +} + +/** + * opp_get_freq() - Gets the frequency corresponding to an available opp + * @opp: opp for which frequency has to be returned for + * + * Return frequency in hertz corresponding to the opp, else + * return 0 + * + * Locking: This function must be called under rcu_read_lock(). opp is a rcu + * protected pointer. This means that opp which could have been fetched by + * opp_find_freq_{exact,ceil,floor} functions is valid as long as we are + * under RCU lock. The pointer returned by the opp_find_freq family must be + * used in the same section as the usage of this function with the pointer + * prior to unlocking with rcu_read_unlock() to maintain the integrity of the + * pointer. + */ +unsigned long opp_get_freq(struct opp *opp) +{ + struct opp *tmp_opp; + unsigned long f = 0; + + tmp_opp = rcu_dereference(opp); + if (unlikely(IS_ERR_OR_NULL(tmp_opp)) || !tmp_opp->available) + pr_err("%s: Invalid parameters\n", __func__); + else + f = tmp_opp->rate; + + return f; +} + +/** + * opp_get_opp_count() - Get number of opps available in the opp list + * @dev: device for which we do this operation + * + * This function returns the number of available opps if there are any, + * else returns 0 if none or the corresponding error value. + * + * Locking: This function must be called under rcu_read_lock(). This function + * internally references two RCU protected structures: device_opp and opp which + * are safe as long as we are under a common RCU locked section. + */ +int opp_get_opp_count(struct device *dev) +{ + struct device_opp *dev_opp; + struct opp *temp_opp; + int count = 0; + + dev_opp = find_device_opp(dev); + if (IS_ERR(dev_opp)) { + int r = PTR_ERR(dev_opp); + dev_err(dev, "%s: device OPP not found (%d)\n", __func__, r); + return r; + } + + list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { + if (temp_opp->available) + count++; + } + + return count; +} + +/** + * opp_find_freq_exact() - search for an exact frequency + * @dev: device for which we do this operation + * @freq: frequency to search for + * @is_available: true/false - match for available opp + * + * Searches for exact match in the opp list and returns pointer to the matching + * opp if found, else returns ERR_PTR in case of error and should be handled + * using IS_ERR. + * + * Note: available is a modifier for the search. if available=true, then the + * match is for exact matching frequency and is available in the stored OPP + * table. if false, the match is for exact frequency which is not available. + * + * This provides a mechanism to enable an opp which is not available currently + * or the opposite as well. + * + * Locking: This function must be called under rcu_read_lock(). opp is a rcu + * protected pointer. The reason for the same is that the opp pointer which is + * returned will remain valid for use with opp_get_{voltage, freq} only while + * under the locked area. The pointer returned must be used prior to unlocking + * with rcu_read_unlock() to maintain the integrity of the pointer. + */ +struct opp *opp_find_freq_exact(struct device *dev, unsigned long freq, + bool available) +{ + struct device_opp *dev_opp; + struct opp *temp_opp, *opp = ERR_PTR(-ENODEV); + + dev_opp = find_device_opp(dev); + if (IS_ERR(dev_opp)) { + int r = PTR_ERR(dev_opp); + dev_err(dev, "%s: device OPP not found (%d)\n", __func__, r); + return ERR_PTR(r); + } + + list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { + if (temp_opp->available == available && + temp_opp->rate == freq) { + opp = temp_opp; + break; + } + } + + return opp; +} + +/** + * opp_find_freq_ceil() - Search for an rounded ceil freq + * @dev: device for which we do this operation + * @freq: Start frequency + * + * Search for the matching ceil *available* OPP from a starting freq + * for a device. + * + * Returns matching *opp and refreshes *freq accordingly, else returns + * ERR_PTR in case of error and should be handled using IS_ERR. + * + * Locking: This function must be called under rcu_read_lock(). opp is a rcu + * protected pointer. The reason for the same is that the opp pointer which is + * returned will remain valid for use with opp_get_{voltage, freq} only while + * under the locked area. The pointer returned must be used prior to unlocking + * with rcu_read_unlock() to maintain the integrity of the pointer. + */ +struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq) +{ + struct device_opp *dev_opp; + struct opp *temp_opp, *opp = ERR_PTR(-ENODEV); + + if (!dev || !freq) { + dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); + return ERR_PTR(-EINVAL); + } + + dev_opp = find_device_opp(dev); + if (IS_ERR(dev_opp)) + return opp; + + list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { + if (temp_opp->available && temp_opp->rate >= *freq) { + opp = temp_opp; + *freq = opp->rate; + break; + } + } + + return opp; +} + +/** + * opp_find_freq_floor() - Search for a rounded floor freq + * @dev: device for which we do this operation + * @freq: Start frequency + * + * Search for the matching floor *available* OPP from a starting freq + * for a device. + * + * Returns matching *opp and refreshes *freq accordingly, else returns + * ERR_PTR in case of error and should be handled using IS_ERR. + * + * Locking: This function must be called under rcu_read_lock(). opp is a rcu + * protected pointer. The reason for the same is that the opp pointer which is + * returned will remain valid for use with opp_get_{voltage, freq} only while + * under the locked area. The pointer returned must be used prior to unlocking + * with rcu_read_unlock() to maintain the integrity of the pointer. + */ +struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq) +{ + struct device_opp *dev_opp; + struct opp *temp_opp, *opp = ERR_PTR(-ENODEV); + + if (!dev || !freq) { + dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); + return ERR_PTR(-EINVAL); + } + + dev_opp = find_device_opp(dev); + if (IS_ERR(dev_opp)) + return opp; + + list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { + if (temp_opp->available) { + /* go to the next node, before choosing prev */ + if (temp_opp->rate > *freq) + break; + else + opp = temp_opp; + } + } + if (!IS_ERR(opp)) + *freq = opp->rate; + + return opp; +} + +/** + * opp_add() - Add an OPP table from a table definitions + * @dev: device for which we do this operation + * @freq: Frequency in Hz for this OPP + * @u_volt: Voltage in uVolts for this OPP + * + * This function adds an opp definition to the opp list and returns status. + * The opp is made available by default and it can be controlled using + * opp_enable/disable functions. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +int opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) +{ + struct device_opp *dev_opp = NULL; + struct opp *opp, *new_opp; + struct list_head *head; + + /* allocate new OPP node */ + new_opp = kzalloc(sizeof(struct opp), GFP_KERNEL); + if (!new_opp) { + dev_warn(dev, "%s: Unable to create new OPP node\n", __func__); + return -ENOMEM; + } + + /* Hold our list modification lock here */ + mutex_lock(&dev_opp_list_lock); + + /* Check for existing list for 'dev' */ + dev_opp = find_device_opp(dev); + if (IS_ERR(dev_opp)) { + /* + * Allocate a new device OPP table. In the infrequent case + * where a new device is needed to be added, we pay this + * penalty. + */ + dev_opp = kzalloc(sizeof(struct device_opp), GFP_KERNEL); + if (!dev_opp) { + mutex_unlock(&dev_opp_list_lock); + kfree(new_opp); + dev_warn(dev, + "%s: Unable to create device OPP structure\n", + __func__); + return -ENOMEM; + } + + dev_opp->dev = dev; + INIT_LIST_HEAD(&dev_opp->opp_list); + + /* Secure the device list modification */ + list_add_rcu(&dev_opp->node, &dev_opp_list); + } + + /* populate the opp table */ + new_opp->dev_opp = dev_opp; + new_opp->rate = freq; + new_opp->u_volt = u_volt; + new_opp->available = true; + + /* Insert new OPP in order of increasing frequency */ + head = &dev_opp->opp_list; + list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) { + if (new_opp->rate < opp->rate) + break; + else + head = &opp->node; + } + + list_add_rcu(&new_opp->node, head); + mutex_unlock(&dev_opp_list_lock); + + return 0; +} + +/** + * opp_set_availability() - helper to set the availability of an opp + * @dev: device for which we do this operation + * @freq: OPP frequency to modify availability + * @availability_req: availability status requested for this opp + * + * Set the availability of an OPP with an RCU operation, opp_{enable,disable} + * share a common logic which is isolated here. + * + * Returns -EINVAL for bad pointers, -ENOMEM if no memory available for the + * copy operation, returns 0 if no modifcation was done OR modification was + * successful. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks to + * keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex locking or synchronize_rcu() blocking calls cannot be used. + */ +static int opp_set_availability(struct device *dev, unsigned long freq, + bool availability_req) +{ + struct device_opp *tmp_dev_opp, *dev_opp = NULL; + struct opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV); + int r = 0; + + /* keep the node allocated */ + new_opp = kmalloc(sizeof(struct opp), GFP_KERNEL); + if (!new_opp) { + dev_warn(dev, "%s: Unable to create OPP\n", __func__); + return -ENOMEM; + } + + mutex_lock(&dev_opp_list_lock); + + /* Find the device_opp */ + list_for_each_entry(tmp_dev_opp, &dev_opp_list, node) { + if (dev == tmp_dev_opp->dev) { + dev_opp = tmp_dev_opp; + break; + } + } + if (IS_ERR(dev_opp)) { + r = PTR_ERR(dev_opp); + dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r); + goto unlock; + } + + /* Do we have the frequency? */ + list_for_each_entry(tmp_opp, &dev_opp->opp_list, node) { + if (tmp_opp->rate == freq) { + opp = tmp_opp; + break; + } + } + if (IS_ERR(opp)) { + r = PTR_ERR(opp); + goto unlock; + } + + /* Is update really needed? */ + if (opp->available == availability_req) + goto unlock; + /* copy the old data over */ + *new_opp = *opp; + + /* plug in new node */ + new_opp->available = availability_req; + + list_replace_rcu(&opp->node, &new_opp->node); + mutex_unlock(&dev_opp_list_lock); + synchronize_rcu(); + + /* clean up old opp */ + new_opp = opp; + goto out; + +unlock: + mutex_unlock(&dev_opp_list_lock); +out: + kfree(new_opp); + return r; +} + +/** + * opp_enable() - Enable a specific OPP + * @dev: device for which we do this operation + * @freq: OPP frequency to enable + * + * Enables a provided opp. If the operation is valid, this returns 0, else the + * corresponding error value. It is meant to be used for users an OPP available + * after being temporarily made unavailable with opp_disable. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function indirectly uses RCU and mutex locks to keep the + * integrity of the internal data structures. Callers should ensure that + * this function is *NOT* called under RCU protection or in contexts where + * mutex locking or synchronize_rcu() blocking calls cannot be used. + */ +int opp_enable(struct device *dev, unsigned long freq) +{ + return opp_set_availability(dev, freq, true); +} + +/** + * opp_disable() - Disable a specific OPP + * @dev: device for which we do this operation + * @freq: OPP frequency to disable + * + * Disables a provided opp. If the operation is valid, this returns + * 0, else the corresponding error value. It is meant to be a temporary + * control by users to make this OPP not available until the circumstances are + * right to make it available again (with a call to opp_enable). + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function indirectly uses RCU and mutex locks to keep the + * integrity of the internal data structures. Callers should ensure that + * this function is *NOT* called under RCU protection or in contexts where + * mutex locking or synchronize_rcu() blocking calls cannot be used. + */ +int opp_disable(struct device *dev, unsigned long freq) +{ + return opp_set_availability(dev, freq, false); +} + +#ifdef CONFIG_CPU_FREQ +/** + * opp_init_cpufreq_table() - create a cpufreq table for a device + * @dev: device for which we do this operation + * @table: Cpufreq table returned back to caller + * + * Generate a cpufreq table for a provided device- this assumes that the + * opp list is already initialized and ready for usage. + * + * This function allocates required memory for the cpufreq table. It is + * expected that the caller does the required maintenance such as freeing + * the table as required. + * + * Returns -EINVAL for bad pointers, -ENODEV if the device is not found, -ENOMEM + * if no memory available for the operation (table is not populated), returns 0 + * if successful and table is populated. + * + * WARNING: It is important for the callers to ensure refreshing their copy of + * the table if any of the mentioned functions have been invoked in the interim. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * To simplify the logic, we pretend we are updater and hold relevant mutex here + * Callers should ensure that this function is *NOT* called under RCU protection + * or in contexts where mutex locking cannot be used. + */ +int opp_init_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **table) +{ + struct device_opp *dev_opp; + struct opp *opp; + struct cpufreq_frequency_table *freq_table; + int i = 0; + + /* Pretend as if I am an updater */ + mutex_lock(&dev_opp_list_lock); + + dev_opp = find_device_opp(dev); + if (IS_ERR(dev_opp)) { + int r = PTR_ERR(dev_opp); + mutex_unlock(&dev_opp_list_lock); + dev_err(dev, "%s: Device OPP not found (%d)\n", __func__, r); + return r; + } + + freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * + (opp_get_opp_count(dev) + 1), GFP_KERNEL); + if (!freq_table) { + mutex_unlock(&dev_opp_list_lock); + dev_warn(dev, "%s: Unable to allocate frequency table\n", + __func__); + return -ENOMEM; + } + + list_for_each_entry(opp, &dev_opp->opp_list, node) { + if (opp->available) { + freq_table[i].index = i; + freq_table[i].frequency = opp->rate / 1000; + i++; + } + } + mutex_unlock(&dev_opp_list_lock); + + freq_table[i].index = i; + freq_table[i].frequency = CPUFREQ_TABLE_END; + + *table = &freq_table[0]; + + return 0; +} +#endif /* CONFIG_CPU_FREQ */ diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index c0bd03c83b9c..698dde742587 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -34,6 +34,7 @@ extern void device_pm_move_last(struct device *); static inline void device_pm_init(struct device *dev) { + spin_lock_init(&dev->power.lock); pm_runtime_init(dev); } @@ -59,6 +60,7 @@ static inline void device_pm_move_last(struct device *dev) {} extern int dpm_sysfs_add(struct device *); extern void dpm_sysfs_remove(struct device *); +extern void rpm_sysfs_remove(struct device *); #else /* CONFIG_PM */ diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index b78c401ffa73..1dd8676d7f55 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -2,17 +2,55 @@ * drivers/base/power/runtime.c - Helper functions for device run-time PM * * Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + * Copyright (C) 2010 Alan Stern <stern@rowland.harvard.edu> * * This file is released under the GPLv2. */ #include <linux/sched.h> #include <linux/pm_runtime.h> -#include <linux/jiffies.h> +#include "power.h" -static int __pm_runtime_resume(struct device *dev, bool from_wq); -static int __pm_request_idle(struct device *dev); -static int __pm_request_resume(struct device *dev); +static int rpm_resume(struct device *dev, int rpmflags); +static int rpm_suspend(struct device *dev, int rpmflags); + +/** + * update_pm_runtime_accounting - Update the time accounting of power states + * @dev: Device to update the accounting for + * + * In order to be able to have time accounting of the various power states + * (as used by programs such as PowerTOP to show the effectiveness of runtime + * PM), we need to track the time spent in each state. + * update_pm_runtime_accounting must be called each time before the + * runtime_status field is updated, to account the time in the old state + * correctly. + */ +void update_pm_runtime_accounting(struct device *dev) +{ + unsigned long now = jiffies; + int delta; + + delta = now - dev->power.accounting_timestamp; + + if (delta < 0) + delta = 0; + + dev->power.accounting_timestamp = now; + + if (dev->power.disable_depth > 0) + return; + + if (dev->power.runtime_status == RPM_SUSPENDED) + dev->power.suspended_jiffies += delta; + else + dev->power.active_jiffies += delta; +} + +static void __update_runtime_status(struct device *dev, enum rpm_status status) +{ + update_pm_runtime_accounting(dev); + dev->power.runtime_status = status; +} /** * pm_runtime_deactivate_timer - Deactivate given device's suspend timer. @@ -40,62 +78,154 @@ static void pm_runtime_cancel_pending(struct device *dev) dev->power.request = RPM_REQ_NONE; } -/** - * __pm_runtime_idle - Notify device bus type if the device can be suspended. - * @dev: Device to notify the bus type about. +/* + * pm_runtime_autosuspend_expiration - Get a device's autosuspend-delay expiration time. + * @dev: Device to handle. * - * This function must be called under dev->power.lock with interrupts disabled. + * Compute the autosuspend-delay expiration time based on the device's + * power.last_busy time. If the delay has already expired or is disabled + * (negative) or the power.use_autosuspend flag isn't set, return 0. + * Otherwise return the expiration time in jiffies (adjusted to be nonzero). + * + * This function may be called either with or without dev->power.lock held. + * Either way it can be racy, since power.last_busy may be updated at any time. */ -static int __pm_runtime_idle(struct device *dev) - __releases(&dev->power.lock) __acquires(&dev->power.lock) +unsigned long pm_runtime_autosuspend_expiration(struct device *dev) +{ + int autosuspend_delay; + long elapsed; + unsigned long last_busy; + unsigned long expires = 0; + + if (!dev->power.use_autosuspend) + goto out; + + autosuspend_delay = ACCESS_ONCE(dev->power.autosuspend_delay); + if (autosuspend_delay < 0) + goto out; + + last_busy = ACCESS_ONCE(dev->power.last_busy); + elapsed = jiffies - last_busy; + if (elapsed < 0) + goto out; /* jiffies has wrapped around. */ + + /* + * If the autosuspend_delay is >= 1 second, align the timer by rounding + * up to the nearest second. + */ + expires = last_busy + msecs_to_jiffies(autosuspend_delay); + if (autosuspend_delay >= 1000) + expires = round_jiffies(expires); + expires += !expires; + if (elapsed >= expires - last_busy) + expires = 0; /* Already expired. */ + + out: + return expires; +} +EXPORT_SYMBOL_GPL(pm_runtime_autosuspend_expiration); + +/** + * rpm_check_suspend_allowed - Test whether a device may be suspended. + * @dev: Device to test. + */ +static int rpm_check_suspend_allowed(struct device *dev) { int retval = 0; if (dev->power.runtime_error) retval = -EINVAL; - else if (dev->power.idle_notification) - retval = -EINPROGRESS; else if (atomic_read(&dev->power.usage_count) > 0 - || dev->power.disable_depth > 0 - || dev->power.runtime_status != RPM_ACTIVE) + || dev->power.disable_depth > 0) retval = -EAGAIN; else if (!pm_children_suspended(dev)) retval = -EBUSY; + + /* Pending resume requests take precedence over suspends. */ + else if ((dev->power.deferred_resume + && dev->power.status == RPM_SUSPENDING) + || (dev->power.request_pending + && dev->power.request == RPM_REQ_RESUME)) + retval = -EAGAIN; + else if (dev->power.runtime_status == RPM_SUSPENDED) + retval = 1; + + return retval; +} + +/** + * rpm_idle - Notify device bus type if the device can be suspended. + * @dev: Device to notify the bus type about. + * @rpmflags: Flag bits. + * + * Check if the device's run-time PM status allows it to be suspended. If + * another idle notification has been started earlier, return immediately. If + * the RPM_ASYNC flag is set then queue an idle-notification request; otherwise + * run the ->runtime_idle() callback directly. + * + * This function must be called under dev->power.lock with interrupts disabled. + */ +static int rpm_idle(struct device *dev, int rpmflags) +{ + int (*callback)(struct device *); + int retval; + + retval = rpm_check_suspend_allowed(dev); + if (retval < 0) + ; /* Conditions are wrong. */ + + /* Idle notifications are allowed only in the RPM_ACTIVE state. */ + else if (dev->power.runtime_status != RPM_ACTIVE) + retval = -EAGAIN; + + /* + * Any pending request other than an idle notification takes + * precedence over us, except that the timer may be running. + */ + else if (dev->power.request_pending && + dev->power.request > RPM_REQ_IDLE) + retval = -EAGAIN; + + /* Act as though RPM_NOWAIT is always set. */ + else if (dev->power.idle_notification) + retval = -EINPROGRESS; if (retval) goto out; - if (dev->power.request_pending) { - /* - * If an idle notification request is pending, cancel it. Any - * other pending request takes precedence over us. - */ - if (dev->power.request == RPM_REQ_IDLE) { - dev->power.request = RPM_REQ_NONE; - } else if (dev->power.request != RPM_REQ_NONE) { - retval = -EAGAIN; - goto out; + /* Pending requests need to be canceled. */ + dev->power.request = RPM_REQ_NONE; + + if (dev->power.no_callbacks) { + /* Assume ->runtime_idle() callback would have suspended. */ + retval = rpm_suspend(dev, rpmflags); + goto out; + } + + /* Carry out an asynchronous or a synchronous idle notification. */ + if (rpmflags & RPM_ASYNC) { + dev->power.request = RPM_REQ_IDLE; + if (!dev->power.request_pending) { + dev->power.request_pending = true; + queue_work(pm_wq, &dev->power.work); } + goto out; } dev->power.idle_notification = true; - if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_idle) { - spin_unlock_irq(&dev->power.lock); - - dev->bus->pm->runtime_idle(dev); - - spin_lock_irq(&dev->power.lock); - } else if (dev->type && dev->type->pm && dev->type->pm->runtime_idle) { - spin_unlock_irq(&dev->power.lock); - - dev->type->pm->runtime_idle(dev); + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_idle) + callback = dev->bus->pm->runtime_idle; + else if (dev->type && dev->type->pm && dev->type->pm->runtime_idle) + callback = dev->type->pm->runtime_idle; + else if (dev->class && dev->class->pm) + callback = dev->class->pm->runtime_idle; + else + callback = NULL; - spin_lock_irq(&dev->power.lock); - } else if (dev->class && dev->class->pm - && dev->class->pm->runtime_idle) { + if (callback) { spin_unlock_irq(&dev->power.lock); - dev->class->pm->runtime_idle(dev); + callback(dev); spin_lock_irq(&dev->power.lock); } @@ -108,113 +238,99 @@ static int __pm_runtime_idle(struct device *dev) } /** - * pm_runtime_idle - Notify device bus type if the device can be suspended. - * @dev: Device to notify the bus type about. + * rpm_callback - Run a given runtime PM callback for a given device. + * @cb: Runtime PM callback to run. + * @dev: Device to run the callback for. */ -int pm_runtime_idle(struct device *dev) +static int rpm_callback(int (*cb)(struct device *), struct device *dev) + __releases(&dev->power.lock) __acquires(&dev->power.lock) { int retval; - spin_lock_irq(&dev->power.lock); - retval = __pm_runtime_idle(dev); - spin_unlock_irq(&dev->power.lock); + if (!cb) + return -ENOSYS; - return retval; -} -EXPORT_SYMBOL_GPL(pm_runtime_idle); - - -/** - * update_pm_runtime_accounting - Update the time accounting of power states - * @dev: Device to update the accounting for - * - * In order to be able to have time accounting of the various power states - * (as used by programs such as PowerTOP to show the effectiveness of runtime - * PM), we need to track the time spent in each state. - * update_pm_runtime_accounting must be called each time before the - * runtime_status field is updated, to account the time in the old state - * correctly. - */ -void update_pm_runtime_accounting(struct device *dev) -{ - unsigned long now = jiffies; - int delta; - - delta = now - dev->power.accounting_timestamp; - - if (delta < 0) - delta = 0; + spin_unlock_irq(&dev->power.lock); - dev->power.accounting_timestamp = now; + retval = cb(dev); - if (dev->power.disable_depth > 0) - return; - - if (dev->power.runtime_status == RPM_SUSPENDED) - dev->power.suspended_jiffies += delta; - else - dev->power.active_jiffies += delta; -} + spin_lock_irq(&dev->power.lock); + dev->power.runtime_error = retval; -static void __update_runtime_status(struct device *dev, enum rpm_status status) -{ - update_pm_runtime_accounting(dev); - dev->power.runtime_status = status; + return retval; } /** - * __pm_runtime_suspend - Carry out run-time suspend of given device. + * rpm_suspend - Carry out run-time suspend of given device. * @dev: Device to suspend. - * @from_wq: If set, the function has been called via pm_wq. + * @rpmflags: Flag bits. * - * Check if the device can be suspended and run the ->runtime_suspend() callback - * provided by its bus type. If another suspend has been started earlier, wait - * for it to finish. If an idle notification or suspend request is pending or - * scheduled, cancel it. + * Check if the device's run-time PM status allows it to be suspended. If + * another suspend has been started earlier, either return immediately or wait + * for it to finish, depending on the RPM_NOWAIT and RPM_ASYNC flags. Cancel a + * pending idle notification. If the RPM_ASYNC flag is set then queue a + * suspend request; otherwise run the ->runtime_suspend() callback directly. + * If a deferred resume was requested while the callback was running then carry + * it out; otherwise send an idle notification for the device (if the suspend + * failed) or for its parent (if the suspend succeeded). * * This function must be called under dev->power.lock with interrupts disabled. */ -int __pm_runtime_suspend(struct device *dev, bool from_wq) +static int rpm_suspend(struct device *dev, int rpmflags) __releases(&dev->power.lock) __acquires(&dev->power.lock) { + int (*callback)(struct device *); struct device *parent = NULL; - bool notify = false; - int retval = 0; + int retval; - dev_dbg(dev, "__pm_runtime_suspend()%s!\n", - from_wq ? " from workqueue" : ""); + dev_dbg(dev, "%s flags 0x%x\n", __func__, rpmflags); repeat: - if (dev->power.runtime_error) { - retval = -EINVAL; - goto out; - } + retval = rpm_check_suspend_allowed(dev); - /* Pending resume requests take precedence over us. */ - if (dev->power.request_pending - && dev->power.request == RPM_REQ_RESUME) { + if (retval < 0) + ; /* Conditions are wrong. */ + + /* Synchronous suspends are not allowed in the RPM_RESUMING state. */ + else if (dev->power.runtime_status == RPM_RESUMING && + !(rpmflags & RPM_ASYNC)) retval = -EAGAIN; + if (retval) goto out; + + /* If the autosuspend_delay time hasn't expired yet, reschedule. */ + if ((rpmflags & RPM_AUTO) + && dev->power.runtime_status != RPM_SUSPENDING) { + unsigned long expires = pm_runtime_autosuspend_expiration(dev); + + if (expires != 0) { + /* Pending requests need to be canceled. */ + dev->power.request = RPM_REQ_NONE; + + /* + * Optimization: If the timer is already running and is + * set to expire at or before the autosuspend delay, + * avoid the overhead of resetting it. Just let it + * expire; pm_suspend_timer_fn() will take care of the + * rest. + */ + if (!(dev->power.timer_expires && time_before_eq( + dev->power.timer_expires, expires))) { + dev->power.timer_expires = expires; + mod_timer(&dev->power.suspend_timer, expires); + } + dev->power.timer_autosuspends = 1; + goto out; + } } /* Other scheduled or pending requests need to be canceled. */ pm_runtime_cancel_pending(dev); - if (dev->power.runtime_status == RPM_SUSPENDED) - retval = 1; - else if (dev->power.runtime_status == RPM_RESUMING - || dev->power.disable_depth > 0 - || atomic_read(&dev->power.usage_count) > 0) - retval = -EAGAIN; - else if (!pm_children_suspended(dev)) - retval = -EBUSY; - if (retval) - goto out; - if (dev->power.runtime_status == RPM_SUSPENDING) { DEFINE_WAIT(wait); - if (from_wq) { + if (rpmflags & (RPM_ASYNC | RPM_NOWAIT)) { retval = -EINPROGRESS; goto out; } @@ -236,46 +352,42 @@ int __pm_runtime_suspend(struct device *dev, bool from_wq) goto repeat; } - __update_runtime_status(dev, RPM_SUSPENDING); dev->power.deferred_resume = false; + if (dev->power.no_callbacks) + goto no_callback; /* Assume success. */ + + /* Carry out an asynchronous or a synchronous suspend. */ + if (rpmflags & RPM_ASYNC) { + dev->power.request = (rpmflags & RPM_AUTO) ? + RPM_REQ_AUTOSUSPEND : RPM_REQ_SUSPEND; + if (!dev->power.request_pending) { + dev->power.request_pending = true; + queue_work(pm_wq, &dev->power.work); + } + goto out; + } - if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend) { - spin_unlock_irq(&dev->power.lock); - - retval = dev->bus->pm->runtime_suspend(dev); - - spin_lock_irq(&dev->power.lock); - dev->power.runtime_error = retval; - } else if (dev->type && dev->type->pm - && dev->type->pm->runtime_suspend) { - spin_unlock_irq(&dev->power.lock); - - retval = dev->type->pm->runtime_suspend(dev); - - spin_lock_irq(&dev->power.lock); - dev->power.runtime_error = retval; - } else if (dev->class && dev->class->pm - && dev->class->pm->runtime_suspend) { - spin_unlock_irq(&dev->power.lock); - - retval = dev->class->pm->runtime_suspend(dev); + __update_runtime_status(dev, RPM_SUSPENDING); - spin_lock_irq(&dev->power.lock); - dev->power.runtime_error = retval; - } else { - retval = -ENOSYS; - } + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend) + callback = dev->bus->pm->runtime_suspend; + else if (dev->type && dev->type->pm && dev->type->pm->runtime_suspend) + callback = dev->type->pm->runtime_suspend; + else if (dev->class && dev->class->pm) + callback = dev->class->pm->runtime_suspend; + else + callback = NULL; + retval = rpm_callback(callback, dev); if (retval) { __update_runtime_status(dev, RPM_ACTIVE); - if (retval == -EAGAIN || retval == -EBUSY) { - if (dev->power.timer_expires == 0) - notify = true; + dev->power.deferred_resume = 0; + if (retval == -EAGAIN || retval == -EBUSY) dev->power.runtime_error = 0; - } else { + else pm_runtime_cancel_pending(dev); - } } else { + no_callback: __update_runtime_status(dev, RPM_SUSPENDED); pm_runtime_deactivate_timer(dev); @@ -287,14 +399,11 @@ int __pm_runtime_suspend(struct device *dev, bool from_wq) wake_up_all(&dev->power.wait_queue); if (dev->power.deferred_resume) { - __pm_runtime_resume(dev, false); + rpm_resume(dev, 0); retval = -EAGAIN; goto out; } - if (notify) - __pm_runtime_idle(dev); - if (parent && !parent->power.ignore_children) { spin_unlock_irq(&dev->power.lock); @@ -304,72 +413,69 @@ int __pm_runtime_suspend(struct device *dev, bool from_wq) } out: - dev_dbg(dev, "__pm_runtime_suspend() returns %d!\n", retval); - - return retval; -} - -/** - * pm_runtime_suspend - Carry out run-time suspend of given device. - * @dev: Device to suspend. - */ -int pm_runtime_suspend(struct device *dev) -{ - int retval; - - spin_lock_irq(&dev->power.lock); - retval = __pm_runtime_suspend(dev, false); - spin_unlock_irq(&dev->power.lock); + dev_dbg(dev, "%s returns %d\n", __func__, retval); return retval; } -EXPORT_SYMBOL_GPL(pm_runtime_suspend); /** - * __pm_runtime_resume - Carry out run-time resume of given device. + * rpm_resume - Carry out run-time resume of given device. * @dev: Device to resume. - * @from_wq: If set, the function has been called via pm_wq. + * @rpmflags: Flag bits. * - * Check if the device can be woken up and run the ->runtime_resume() callback - * provided by its bus type. If another resume has been started earlier, wait - * for it to finish. If there's a suspend running in parallel with this - * function, wait for it to finish and resume the device. Cancel any scheduled - * or pending requests. + * Check if the device's run-time PM status allows it to be resumed. Cancel + * any scheduled or pending requests. If another resume has been started + * earlier, either return imediately or wait for it to finish, depending on the + * RPM_NOWAIT and RPM_ASYNC flags. Similarly, if there's a suspend running in + * parallel with this function, either tell the other process to resume after + * suspending (deferred_resume) or wait for it to finish. If the RPM_ASYNC + * flag is set then queue a resume request; otherwise run the + * ->runtime_resume() callback directly. Queue an idle notification for the + * device if the resume succeeded. * * This function must be called under dev->power.lock with interrupts disabled. */ -int __pm_runtime_resume(struct device *dev, bool from_wq) +static int rpm_resume(struct device *dev, int rpmflags) __releases(&dev->power.lock) __acquires(&dev->power.lock) { + int (*callback)(struct device *); struct device *parent = NULL; int retval = 0; - dev_dbg(dev, "__pm_runtime_resume()%s!\n", - from_wq ? " from workqueue" : ""); + dev_dbg(dev, "%s flags 0x%x\n", __func__, rpmflags); repeat: - if (dev->power.runtime_error) { + if (dev->power.runtime_error) retval = -EINVAL; + else if (dev->power.disable_depth > 0) + retval = -EAGAIN; + if (retval) goto out; - } - pm_runtime_cancel_pending(dev); + /* + * Other scheduled or pending requests need to be canceled. Small + * optimization: If an autosuspend timer is running, leave it running + * rather than cancelling it now only to restart it again in the near + * future. + */ + dev->power.request = RPM_REQ_NONE; + if (!dev->power.timer_autosuspends) + pm_runtime_deactivate_timer(dev); - if (dev->power.runtime_status == RPM_ACTIVE) + if (dev->power.runtime_status == RPM_ACTIVE) { retval = 1; - else if (dev->power.disable_depth > 0) - retval = -EAGAIN; - if (retval) goto out; + } if (dev->power.runtime_status == RPM_RESUMING || dev->power.runtime_status == RPM_SUSPENDING) { DEFINE_WAIT(wait); - if (from_wq) { + if (rpmflags & (RPM_ASYNC | RPM_NOWAIT)) { if (dev->power.runtime_status == RPM_SUSPENDING) dev->power.deferred_resume = true; - retval = -EINPROGRESS; + else + retval = -EINPROGRESS; goto out; } @@ -391,6 +497,34 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) goto repeat; } + /* + * See if we can skip waking up the parent. This is safe only if + * power.no_callbacks is set, because otherwise we don't know whether + * the resume will actually succeed. + */ + if (dev->power.no_callbacks && !parent && dev->parent) { + spin_lock(&dev->parent->power.lock); + if (dev->parent->power.disable_depth > 0 + || dev->parent->power.ignore_children + || dev->parent->power.runtime_status == RPM_ACTIVE) { + atomic_inc(&dev->parent->power.child_count); + spin_unlock(&dev->parent->power.lock); + goto no_callback; /* Assume success. */ + } + spin_unlock(&dev->parent->power.lock); + } + + /* Carry out an asynchronous or a synchronous resume. */ + if (rpmflags & RPM_ASYNC) { + dev->power.request = RPM_REQ_RESUME; + if (!dev->power.request_pending) { + dev->power.request_pending = true; + queue_work(pm_wq, &dev->power.work); + } + retval = 0; + goto out; + } + if (!parent && dev->parent) { /* * Increment the parent's resume counter and resume it if @@ -408,7 +542,7 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) */ if (!parent->power.disable_depth && !parent->power.ignore_children) { - __pm_runtime_resume(parent, false); + rpm_resume(parent, 0); if (parent->power.runtime_status != RPM_ACTIVE) retval = -EBUSY; } @@ -420,39 +554,26 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) goto repeat; } - __update_runtime_status(dev, RPM_RESUMING); - - if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume) { - spin_unlock_irq(&dev->power.lock); - - retval = dev->bus->pm->runtime_resume(dev); - - spin_lock_irq(&dev->power.lock); - dev->power.runtime_error = retval; - } else if (dev->type && dev->type->pm - && dev->type->pm->runtime_resume) { - spin_unlock_irq(&dev->power.lock); - - retval = dev->type->pm->runtime_resume(dev); + if (dev->power.no_callbacks) + goto no_callback; /* Assume success. */ - spin_lock_irq(&dev->power.lock); - dev->power.runtime_error = retval; - } else if (dev->class && dev->class->pm - && dev->class->pm->runtime_resume) { - spin_unlock_irq(&dev->power.lock); - - retval = dev->class->pm->runtime_resume(dev); + __update_runtime_status(dev, RPM_RESUMING); - spin_lock_irq(&dev->power.lock); - dev->power.runtime_error = retval; - } else { - retval = -ENOSYS; - } + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume) + callback = dev->bus->pm->runtime_resume; + else if (dev->type && dev->type->pm && dev->type->pm->runtime_resume) + callback = dev->type->pm->runtime_resume; + else if (dev->class && dev->class->pm) + callback = dev->class->pm->runtime_resume; + else + callback = NULL; + retval = rpm_callback(callback, dev); if (retval) { __update_runtime_status(dev, RPM_SUSPENDED); pm_runtime_cancel_pending(dev); } else { + no_callback: __update_runtime_status(dev, RPM_ACTIVE); if (parent) atomic_inc(&parent->power.child_count); @@ -460,7 +581,7 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) wake_up_all(&dev->power.wait_queue); if (!retval) - __pm_request_idle(dev); + rpm_idle(dev, RPM_ASYNC); out: if (parent) { @@ -471,28 +592,12 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) spin_lock_irq(&dev->power.lock); } - dev_dbg(dev, "__pm_runtime_resume() returns %d!\n", retval); + dev_dbg(dev, "%s returns %d\n", __func__, retval); return retval; } /** - * pm_runtime_resume - Carry out run-time resume of given device. - * @dev: Device to suspend. - */ -int pm_runtime_resume(struct device *dev) -{ - int retval; - - spin_lock_irq(&dev->power.lock); - retval = __pm_runtime_resume(dev, false); - spin_unlock_irq(&dev->power.lock); - - return retval; -} -EXPORT_SYMBOL_GPL(pm_runtime_resume); - -/** * pm_runtime_work - Universal run-time PM work function. * @work: Work structure used for scheduling the execution of this function. * @@ -517,13 +622,16 @@ static void pm_runtime_work(struct work_struct *work) case RPM_REQ_NONE: break; case RPM_REQ_IDLE: - __pm_runtime_idle(dev); + rpm_idle(dev, RPM_NOWAIT); break; case RPM_REQ_SUSPEND: - __pm_runtime_suspend(dev, true); + rpm_suspend(dev, RPM_NOWAIT); + break; + case RPM_REQ_AUTOSUSPEND: + rpm_suspend(dev, RPM_NOWAIT | RPM_AUTO); break; case RPM_REQ_RESUME: - __pm_runtime_resume(dev, true); + rpm_resume(dev, RPM_NOWAIT); break; } @@ -532,117 +640,10 @@ static void pm_runtime_work(struct work_struct *work) } /** - * __pm_request_idle - Submit an idle notification request for given device. - * @dev: Device to handle. - * - * Check if the device's run-time PM status is correct for suspending the device - * and queue up a request to run __pm_runtime_idle() for it. - * - * This function must be called under dev->power.lock with interrupts disabled. - */ -static int __pm_request_idle(struct device *dev) -{ - int retval = 0; - - if (dev->power.runtime_error) - retval = -EINVAL; - else if (atomic_read(&dev->power.usage_count) > 0 - || dev->power.disable_depth > 0 - || dev->power.runtime_status == RPM_SUSPENDED - || dev->power.runtime_status == RPM_SUSPENDING) - retval = -EAGAIN; - else if (!pm_children_suspended(dev)) - retval = -EBUSY; - if (retval) - return retval; - - if (dev->power.request_pending) { - /* Any requests other then RPM_REQ_IDLE take precedence. */ - if (dev->power.request == RPM_REQ_NONE) - dev->power.request = RPM_REQ_IDLE; - else if (dev->power.request != RPM_REQ_IDLE) - retval = -EAGAIN; - return retval; - } - - dev->power.request = RPM_REQ_IDLE; - dev->power.request_pending = true; - queue_work(pm_wq, &dev->power.work); - - return retval; -} - -/** - * pm_request_idle - Submit an idle notification request for given device. - * @dev: Device to handle. - */ -int pm_request_idle(struct device *dev) -{ - unsigned long flags; - int retval; - - spin_lock_irqsave(&dev->power.lock, flags); - retval = __pm_request_idle(dev); - spin_unlock_irqrestore(&dev->power.lock, flags); - - return retval; -} -EXPORT_SYMBOL_GPL(pm_request_idle); - -/** - * __pm_request_suspend - Submit a suspend request for given device. - * @dev: Device to suspend. - * - * This function must be called under dev->power.lock with interrupts disabled. - */ -static int __pm_request_suspend(struct device *dev) -{ - int retval = 0; - - if (dev->power.runtime_error) - return -EINVAL; - - if (dev->power.runtime_status == RPM_SUSPENDED) - retval = 1; - else if (atomic_read(&dev->power.usage_count) > 0 - || dev->power.disable_depth > 0) - retval = -EAGAIN; - else if (dev->power.runtime_status == RPM_SUSPENDING) - retval = -EINPROGRESS; - else if (!pm_children_suspended(dev)) - retval = -EBUSY; - if (retval < 0) - return retval; - - pm_runtime_deactivate_timer(dev); - - if (dev->power.request_pending) { - /* - * Pending resume requests take precedence over us, but we can - * overtake any other pending request. - */ - if (dev->power.request == RPM_REQ_RESUME) - retval = -EAGAIN; - else if (dev->power.request != RPM_REQ_SUSPEND) - dev->power.request = retval ? - RPM_REQ_NONE : RPM_REQ_SUSPEND; - return retval; - } else if (retval) { - return retval; - } - - dev->power.request = RPM_REQ_SUSPEND; - dev->power.request_pending = true; - queue_work(pm_wq, &dev->power.work); - - return 0; -} - -/** * pm_suspend_timer_fn - Timer function for pm_schedule_suspend(). * @data: Device pointer passed by pm_schedule_suspend(). * - * Check if the time is right and execute __pm_request_suspend() in that case. + * Check if the time is right and queue a suspend request. */ static void pm_suspend_timer_fn(unsigned long data) { @@ -656,7 +657,8 @@ static void pm_suspend_timer_fn(unsigned long data) /* If 'expire' is after 'jiffies' we've been called too early. */ if (expires > 0 && !time_after(expires, jiffies)) { dev->power.timer_expires = 0; - __pm_request_suspend(dev); + rpm_suspend(dev, dev->power.timer_autosuspends ? + (RPM_ASYNC | RPM_AUTO) : RPM_ASYNC); } spin_unlock_irqrestore(&dev->power.lock, flags); @@ -670,47 +672,25 @@ static void pm_suspend_timer_fn(unsigned long data) int pm_schedule_suspend(struct device *dev, unsigned int delay) { unsigned long flags; - int retval = 0; + int retval; spin_lock_irqsave(&dev->power.lock, flags); - if (dev->power.runtime_error) { - retval = -EINVAL; - goto out; - } - if (!delay) { - retval = __pm_request_suspend(dev); + retval = rpm_suspend(dev, RPM_ASYNC); goto out; } - pm_runtime_deactivate_timer(dev); - - if (dev->power.request_pending) { - /* - * Pending resume requests take precedence over us, but any - * other pending requests have to be canceled. - */ - if (dev->power.request == RPM_REQ_RESUME) { - retval = -EAGAIN; - goto out; - } - dev->power.request = RPM_REQ_NONE; - } - - if (dev->power.runtime_status == RPM_SUSPENDED) - retval = 1; - else if (atomic_read(&dev->power.usage_count) > 0 - || dev->power.disable_depth > 0) - retval = -EAGAIN; - else if (!pm_children_suspended(dev)) - retval = -EBUSY; + retval = rpm_check_suspend_allowed(dev); if (retval) goto out; + /* Other scheduled or pending requests need to be canceled. */ + pm_runtime_cancel_pending(dev); + dev->power.timer_expires = jiffies + msecs_to_jiffies(delay); - if (!dev->power.timer_expires) - dev->power.timer_expires = 1; + dev->power.timer_expires += !dev->power.timer_expires; + dev->power.timer_autosuspends = 0; mod_timer(&dev->power.suspend_timer, dev->power.timer_expires); out: @@ -721,103 +701,88 @@ int pm_schedule_suspend(struct device *dev, unsigned int delay) EXPORT_SYMBOL_GPL(pm_schedule_suspend); /** - * pm_request_resume - Submit a resume request for given device. - * @dev: Device to resume. + * __pm_runtime_idle - Entry point for run-time idle operations. + * @dev: Device to send idle notification for. + * @rpmflags: Flag bits. * - * This function must be called under dev->power.lock with interrupts disabled. + * If the RPM_GET_PUT flag is set, decrement the device's usage count and + * return immediately if it is larger than zero. Then carry out an idle + * notification, either synchronous or asynchronous. + * + * This routine may be called in atomic context if the RPM_ASYNC flag is set. */ -static int __pm_request_resume(struct device *dev) +int __pm_runtime_idle(struct device *dev, int rpmflags) { - int retval = 0; - - if (dev->power.runtime_error) - return -EINVAL; - - if (dev->power.runtime_status == RPM_ACTIVE) - retval = 1; - else if (dev->power.runtime_status == RPM_RESUMING) - retval = -EINPROGRESS; - else if (dev->power.disable_depth > 0) - retval = -EAGAIN; - if (retval < 0) - return retval; - - pm_runtime_deactivate_timer(dev); + unsigned long flags; + int retval; - if (dev->power.runtime_status == RPM_SUSPENDING) { - dev->power.deferred_resume = true; - return retval; + if (rpmflags & RPM_GET_PUT) { + if (!atomic_dec_and_test(&dev->power.usage_count)) + return 0; } - if (dev->power.request_pending) { - /* If non-resume request is pending, we can overtake it. */ - dev->power.request = retval ? RPM_REQ_NONE : RPM_REQ_RESUME; - return retval; - } - if (retval) - return retval; - dev->power.request = RPM_REQ_RESUME; - dev->power.request_pending = true; - queue_work(pm_wq, &dev->power.work); + spin_lock_irqsave(&dev->power.lock, flags); + retval = rpm_idle(dev, rpmflags); + spin_unlock_irqrestore(&dev->power.lock, flags); return retval; } +EXPORT_SYMBOL_GPL(__pm_runtime_idle); /** - * pm_request_resume - Submit a resume request for given device. - * @dev: Device to resume. + * __pm_runtime_suspend - Entry point for run-time put/suspend operations. + * @dev: Device to suspend. + * @rpmflags: Flag bits. + * + * If the RPM_GET_PUT flag is set, decrement the device's usage count and + * return immediately if it is larger than zero. Then carry out a suspend, + * either synchronous or asynchronous. + * + * This routine may be called in atomic context if the RPM_ASYNC flag is set. */ -int pm_request_resume(struct device *dev) +int __pm_runtime_suspend(struct device *dev, int rpmflags) { unsigned long flags; int retval; + if (rpmflags & RPM_GET_PUT) { + if (!atomic_dec_and_test(&dev->power.usage_count)) + return 0; + } + spin_lock_irqsave(&dev->power.lock, flags); - retval = __pm_request_resume(dev); + retval = rpm_suspend(dev, rpmflags); spin_unlock_irqrestore(&dev->power.lock, flags); return retval; } -EXPORT_SYMBOL_GPL(pm_request_resume); +EXPORT_SYMBOL_GPL(__pm_runtime_suspend); /** - * __pm_runtime_get - Reference count a device and wake it up, if necessary. - * @dev: Device to handle. - * @sync: If set and the device is suspended, resume it synchronously. + * __pm_runtime_resume - Entry point for run-time resume operations. + * @dev: Device to resume. + * @rpmflags: Flag bits. + * + * If the RPM_GET_PUT flag is set, increment the device's usage count. Then + * carry out a resume, either synchronous or asynchronous. * - * Increment the usage count of the device and resume it or submit a resume - * request for it, depending on the value of @sync. + * This routine may be called in atomic context if the RPM_ASYNC flag is set. */ -int __pm_runtime_get(struct device *dev, bool sync) +int __pm_runtime_resume(struct device *dev, int rpmflags) { + unsigned long flags; int retval; - atomic_inc(&dev->power.usage_count); - retval = sync ? pm_runtime_resume(dev) : pm_request_resume(dev); + if (rpmflags & RPM_GET_PUT) + atomic_inc(&dev->power.usage_count); - return retval; -} -EXPORT_SYMBOL_GPL(__pm_runtime_get); - -/** - * __pm_runtime_put - Decrement the device's usage counter and notify its bus. - * @dev: Device to handle. - * @sync: If the device's bus type is to be notified, do that synchronously. - * - * Decrement the usage count of the device and if it reaches zero, carry out a - * synchronous idle notification or submit an idle notification request for it, - * depending on the value of @sync. - */ -int __pm_runtime_put(struct device *dev, bool sync) -{ - int retval = 0; - - if (atomic_dec_and_test(&dev->power.usage_count)) - retval = sync ? pm_runtime_idle(dev) : pm_request_idle(dev); + spin_lock_irqsave(&dev->power.lock, flags); + retval = rpm_resume(dev, rpmflags); + spin_unlock_irqrestore(&dev->power.lock, flags); return retval; } -EXPORT_SYMBOL_GPL(__pm_runtime_put); +EXPORT_SYMBOL_GPL(__pm_runtime_resume); /** * __pm_runtime_set_status - Set run-time PM status of a device. @@ -968,7 +933,7 @@ int pm_runtime_barrier(struct device *dev) if (dev->power.request_pending && dev->power.request == RPM_REQ_RESUME) { - __pm_runtime_resume(dev, false); + rpm_resume(dev, 0); retval = 1; } @@ -1017,7 +982,7 @@ void __pm_runtime_disable(struct device *dev, bool check_resume) */ pm_runtime_get_noresume(dev); - __pm_runtime_resume(dev, false); + rpm_resume(dev, 0); pm_runtime_put_noidle(dev); } @@ -1065,7 +1030,7 @@ void pm_runtime_forbid(struct device *dev) dev->power.runtime_auto = false; atomic_inc(&dev->power.usage_count); - __pm_runtime_resume(dev, false); + rpm_resume(dev, 0); out: spin_unlock_irq(&dev->power.lock); @@ -1086,7 +1051,7 @@ void pm_runtime_allow(struct device *dev) dev->power.runtime_auto = true; if (atomic_dec_and_test(&dev->power.usage_count)) - __pm_runtime_idle(dev); + rpm_idle(dev, RPM_AUTO); out: spin_unlock_irq(&dev->power.lock); @@ -1094,13 +1059,110 @@ void pm_runtime_allow(struct device *dev) EXPORT_SYMBOL_GPL(pm_runtime_allow); /** + * pm_runtime_no_callbacks - Ignore run-time PM callbacks for a device. + * @dev: Device to handle. + * + * Set the power.no_callbacks flag, which tells the PM core that this + * device is power-managed through its parent and has no run-time PM + * callbacks of its own. The run-time sysfs attributes will be removed. + * + */ +void pm_runtime_no_callbacks(struct device *dev) +{ + spin_lock_irq(&dev->power.lock); + dev->power.no_callbacks = 1; + spin_unlock_irq(&dev->power.lock); + if (device_is_registered(dev)) + rpm_sysfs_remove(dev); +} +EXPORT_SYMBOL_GPL(pm_runtime_no_callbacks); + +/** + * update_autosuspend - Handle a change to a device's autosuspend settings. + * @dev: Device to handle. + * @old_delay: The former autosuspend_delay value. + * @old_use: The former use_autosuspend value. + * + * Prevent runtime suspend if the new delay is negative and use_autosuspend is + * set; otherwise allow it. Send an idle notification if suspends are allowed. + * + * This function must be called under dev->power.lock with interrupts disabled. + */ +static void update_autosuspend(struct device *dev, int old_delay, int old_use) +{ + int delay = dev->power.autosuspend_delay; + + /* Should runtime suspend be prevented now? */ + if (dev->power.use_autosuspend && delay < 0) { + + /* If it used to be allowed then prevent it. */ + if (!old_use || old_delay >= 0) { + atomic_inc(&dev->power.usage_count); + rpm_resume(dev, 0); + } + } + + /* Runtime suspend should be allowed now. */ + else { + + /* If it used to be prevented then allow it. */ + if (old_use && old_delay < 0) + atomic_dec(&dev->power.usage_count); + + /* Maybe we can autosuspend now. */ + rpm_idle(dev, RPM_AUTO); + } +} + +/** + * pm_runtime_set_autosuspend_delay - Set a device's autosuspend_delay value. + * @dev: Device to handle. + * @delay: Value of the new delay in milliseconds. + * + * Set the device's power.autosuspend_delay value. If it changes to negative + * and the power.use_autosuspend flag is set, prevent run-time suspends. If it + * changes the other way, allow run-time suspends. + */ +void pm_runtime_set_autosuspend_delay(struct device *dev, int delay) +{ + int old_delay, old_use; + + spin_lock_irq(&dev->power.lock); + old_delay = dev->power.autosuspend_delay; + old_use = dev->power.use_autosuspend; + dev->power.autosuspend_delay = delay; + update_autosuspend(dev, old_delay, old_use); + spin_unlock_irq(&dev->power.lock); +} +EXPORT_SYMBOL_GPL(pm_runtime_set_autosuspend_delay); + +/** + * __pm_runtime_use_autosuspend - Set a device's use_autosuspend flag. + * @dev: Device to handle. + * @use: New value for use_autosuspend. + * + * Set the device's power.use_autosuspend flag, and allow or prevent run-time + * suspends as needed. + */ +void __pm_runtime_use_autosuspend(struct device *dev, bool use) +{ + int old_delay, old_use; + + spin_lock_irq(&dev->power.lock); + old_delay = dev->power.autosuspend_delay; + old_use = dev->power.use_autosuspend; + dev->power.use_autosuspend = use; + update_autosuspend(dev, old_delay, old_use); + spin_unlock_irq(&dev->power.lock); +} +EXPORT_SYMBOL_GPL(__pm_runtime_use_autosuspend); + +/** * pm_runtime_init - Initialize run-time PM fields in given device object. * @dev: Device object to initialize. */ void pm_runtime_init(struct device *dev) { - spin_lock_init(&dev->power.lock); - dev->power.runtime_status = RPM_SUSPENDED; dev->power.idle_notification = false; diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index e56b4388fe61..0b1e46bf3e56 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -75,12 +75,27 @@ * attribute is set to "enabled" by bus type code or device drivers and in * that cases it should be safe to leave the default value. * + * autosuspend_delay_ms - Report/change a device's autosuspend_delay value + * + * Some drivers don't want to carry out a runtime suspend as soon as a + * device becomes idle; they want it always to remain idle for some period + * of time before suspending it. This period is the autosuspend_delay + * value (expressed in milliseconds) and it can be controlled by the user. + * If the value is negative then the device will never be runtime + * suspended. + * + * NOTE: The autosuspend_delay_ms attribute and the autosuspend_delay + * value are used only if the driver calls pm_runtime_use_autosuspend(). + * * wakeup_count - Report the number of wakeup events related to the device */ static const char enabled[] = "enabled"; static const char disabled[] = "disabled"; +const char power_group_name[] = "power"; +EXPORT_SYMBOL_GPL(power_group_name); + #ifdef CONFIG_PM_RUNTIME static const char ctrl_auto[] = "auto"; static const char ctrl_on[] = "on"; @@ -170,6 +185,33 @@ static ssize_t rtpm_status_show(struct device *dev, } static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL); + +static ssize_t autosuspend_delay_ms_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + if (!dev->power.use_autosuspend) + return -EIO; + return sprintf(buf, "%d\n", dev->power.autosuspend_delay); +} + +static ssize_t autosuspend_delay_ms_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t n) +{ + long delay; + + if (!dev->power.use_autosuspend) + return -EIO; + + if (strict_strtol(buf, 10, &delay) != 0 || delay != (int) delay) + return -EINVAL; + + pm_runtime_set_autosuspend_delay(dev, delay); + return n; +} + +static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show, + autosuspend_delay_ms_store); + #endif static ssize_t @@ -210,11 +252,122 @@ static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store); static ssize_t wakeup_count_show(struct device *dev, struct device_attribute *attr, char *buf) { - return sprintf(buf, "%lu\n", dev->power.wakeup_count); + unsigned long count = 0; + bool enabled = false; + + spin_lock_irq(&dev->power.lock); + if (dev->power.wakeup) { + count = dev->power.wakeup->event_count; + enabled = true; + } + spin_unlock_irq(&dev->power.lock); + return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); } static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL); -#endif + +static ssize_t wakeup_active_count_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + unsigned long count = 0; + bool enabled = false; + + spin_lock_irq(&dev->power.lock); + if (dev->power.wakeup) { + count = dev->power.wakeup->active_count; + enabled = true; + } + spin_unlock_irq(&dev->power.lock); + return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); +} + +static DEVICE_ATTR(wakeup_active_count, 0444, wakeup_active_count_show, NULL); + +static ssize_t wakeup_hit_count_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + unsigned long count = 0; + bool enabled = false; + + spin_lock_irq(&dev->power.lock); + if (dev->power.wakeup) { + count = dev->power.wakeup->hit_count; + enabled = true; + } + spin_unlock_irq(&dev->power.lock); + return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); +} + +static DEVICE_ATTR(wakeup_hit_count, 0444, wakeup_hit_count_show, NULL); + +static ssize_t wakeup_active_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + unsigned int active = 0; + bool enabled = false; + + spin_lock_irq(&dev->power.lock); + if (dev->power.wakeup) { + active = dev->power.wakeup->active; + enabled = true; + } + spin_unlock_irq(&dev->power.lock); + return enabled ? sprintf(buf, "%u\n", active) : sprintf(buf, "\n"); +} + +static DEVICE_ATTR(wakeup_active, 0444, wakeup_active_show, NULL); + +static ssize_t wakeup_total_time_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + s64 msec = 0; + bool enabled = false; + + spin_lock_irq(&dev->power.lock); + if (dev->power.wakeup) { + msec = ktime_to_ms(dev->power.wakeup->total_time); + enabled = true; + } + spin_unlock_irq(&dev->power.lock); + return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); +} + +static DEVICE_ATTR(wakeup_total_time_ms, 0444, wakeup_total_time_show, NULL); + +static ssize_t wakeup_max_time_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + s64 msec = 0; + bool enabled = false; + + spin_lock_irq(&dev->power.lock); + if (dev->power.wakeup) { + msec = ktime_to_ms(dev->power.wakeup->max_time); + enabled = true; + } + spin_unlock_irq(&dev->power.lock); + return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); +} + +static DEVICE_ATTR(wakeup_max_time_ms, 0444, wakeup_max_time_show, NULL); + +static ssize_t wakeup_last_time_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + s64 msec = 0; + bool enabled = false; + + spin_lock_irq(&dev->power.lock); + if (dev->power.wakeup) { + msec = ktime_to_ms(dev->power.wakeup->last_time); + enabled = true; + } + spin_unlock_irq(&dev->power.lock); + return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); +} + +static DEVICE_ATTR(wakeup_last_time_ms, 0444, wakeup_last_time_show, NULL); +#endif /* CONFIG_PM_SLEEP */ #ifdef CONFIG_PM_ADVANCED_DEBUG #ifdef CONFIG_PM_RUNTIME @@ -279,19 +432,20 @@ static DEVICE_ATTR(async, 0644, async_show, async_store); #endif /* CONFIG_PM_ADVANCED_DEBUG */ static struct attribute * power_attrs[] = { -#ifdef CONFIG_PM_RUNTIME - &dev_attr_control.attr, - &dev_attr_runtime_status.attr, - &dev_attr_runtime_suspended_time.attr, - &dev_attr_runtime_active_time.attr, -#endif &dev_attr_wakeup.attr, #ifdef CONFIG_PM_SLEEP &dev_attr_wakeup_count.attr, + &dev_attr_wakeup_active_count.attr, + &dev_attr_wakeup_hit_count.attr, + &dev_attr_wakeup_active.attr, + &dev_attr_wakeup_total_time_ms.attr, + &dev_attr_wakeup_max_time_ms.attr, + &dev_attr_wakeup_last_time_ms.attr, #endif #ifdef CONFIG_PM_ADVANCED_DEBUG &dev_attr_async.attr, #ifdef CONFIG_PM_RUNTIME + &dev_attr_runtime_status.attr, &dev_attr_runtime_usage.attr, &dev_attr_runtime_active_kids.attr, &dev_attr_runtime_enabled.attr, @@ -300,10 +454,53 @@ static struct attribute * power_attrs[] = { NULL, }; static struct attribute_group pm_attr_group = { - .name = "power", + .name = power_group_name, .attrs = power_attrs, }; +#ifdef CONFIG_PM_RUNTIME + +static struct attribute *runtime_attrs[] = { +#ifndef CONFIG_PM_ADVANCED_DEBUG + &dev_attr_runtime_status.attr, +#endif + &dev_attr_control.attr, + &dev_attr_runtime_suspended_time.attr, + &dev_attr_runtime_active_time.attr, + &dev_attr_autosuspend_delay_ms.attr, + NULL, +}; +static struct attribute_group pm_runtime_attr_group = { + .name = power_group_name, + .attrs = runtime_attrs, +}; + +int dpm_sysfs_add(struct device *dev) +{ + int rc; + + rc = sysfs_create_group(&dev->kobj, &pm_attr_group); + if (rc == 0 && !dev->power.no_callbacks) { + rc = sysfs_merge_group(&dev->kobj, &pm_runtime_attr_group); + if (rc) + sysfs_remove_group(&dev->kobj, &pm_attr_group); + } + return rc; +} + +void rpm_sysfs_remove(struct device *dev) +{ + sysfs_unmerge_group(&dev->kobj, &pm_runtime_attr_group); +} + +void dpm_sysfs_remove(struct device *dev) +{ + rpm_sysfs_remove(dev); + sysfs_remove_group(&dev->kobj, &pm_attr_group); +} + +#else /* CONFIG_PM_RUNTIME */ + int dpm_sysfs_add(struct device * dev) { return sysfs_create_group(&dev->kobj, &pm_attr_group); @@ -313,3 +510,5 @@ void dpm_sysfs_remove(struct device * dev) { sysfs_remove_group(&dev->kobj, &pm_attr_group); } + +#endif diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c index 0a1a2c4dbc6e..9f4258df4cfd 100644 --- a/drivers/base/power/trace.c +++ b/drivers/base/power/trace.c @@ -188,8 +188,10 @@ static int show_file_hash(unsigned int value) static int show_dev_hash(unsigned int value) { int match = 0; - struct list_head *entry = dpm_list.prev; + struct list_head *entry; + device_pm_lock(); + entry = dpm_list.prev; while (entry != &dpm_list) { struct device * dev = to_device(entry); unsigned int hash = hash_string(DEVSEED, dev_name(dev), DEVHASH); @@ -199,11 +201,43 @@ static int show_dev_hash(unsigned int value) } entry = entry->prev; } + device_pm_unlock(); return match; } static unsigned int hash_value_early_read; +int show_trace_dev_match(char *buf, size_t size) +{ + unsigned int value = hash_value_early_read / (USERHASH * FILEHASH); + int ret = 0; + struct list_head *entry; + + /* + * It's possible that multiple devices will match the hash and we can't + * tell which is the culprit, so it's best to output them all. + */ + device_pm_lock(); + entry = dpm_list.prev; + while (size && entry != &dpm_list) { + struct device *dev = to_device(entry); + unsigned int hash = hash_string(DEVSEED, dev_name(dev), + DEVHASH); + if (hash == value) { + int len = snprintf(buf, size, "%s\n", + dev_driver_string(dev)); + if (len > size) + len = size; + buf += len; + ret += len; + size -= len; + } + entry = entry->prev; + } + device_pm_unlock(); + return ret; +} + static int early_resume_init(void) { hash_value_early_read = read_magic_time(); diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index eb594facfc3f..71c5528e1c35 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -11,7 +11,12 @@ #include <linux/sched.h> #include <linux/capability.h> #include <linux/suspend.h> -#include <linux/pm.h> +#include <linux/seq_file.h> +#include <linux/debugfs.h> + +#include "power.h" + +#define TIMEOUT 100 /* * If set, the suspend/hibernate code will abort transitions to a sleep state @@ -20,18 +25,244 @@ bool events_check_enabled; /* The counter of registered wakeup events. */ -static unsigned long event_count; +static atomic_t event_count = ATOMIC_INIT(0); /* A preserved old value of event_count. */ -static unsigned long saved_event_count; +static unsigned int saved_count; /* The counter of wakeup events being processed. */ -static unsigned long events_in_progress; +static atomic_t events_in_progress = ATOMIC_INIT(0); static DEFINE_SPINLOCK(events_lock); static void pm_wakeup_timer_fn(unsigned long data); -static DEFINE_TIMER(events_timer, pm_wakeup_timer_fn, 0, 0); -static unsigned long events_timer_expires; +static LIST_HEAD(wakeup_sources); + +/** + * wakeup_source_create - Create a struct wakeup_source object. + * @name: Name of the new wakeup source. + */ +struct wakeup_source *wakeup_source_create(const char *name) +{ + struct wakeup_source *ws; + + ws = kzalloc(sizeof(*ws), GFP_KERNEL); + if (!ws) + return NULL; + + spin_lock_init(&ws->lock); + if (name) + ws->name = kstrdup(name, GFP_KERNEL); + + return ws; +} +EXPORT_SYMBOL_GPL(wakeup_source_create); + +/** + * wakeup_source_destroy - Destroy a struct wakeup_source object. + * @ws: Wakeup source to destroy. + */ +void wakeup_source_destroy(struct wakeup_source *ws) +{ + if (!ws) + return; + + spin_lock_irq(&ws->lock); + while (ws->active) { + spin_unlock_irq(&ws->lock); + + schedule_timeout_interruptible(msecs_to_jiffies(TIMEOUT)); + + spin_lock_irq(&ws->lock); + } + spin_unlock_irq(&ws->lock); + + kfree(ws->name); + kfree(ws); +} +EXPORT_SYMBOL_GPL(wakeup_source_destroy); + +/** + * wakeup_source_add - Add given object to the list of wakeup sources. + * @ws: Wakeup source object to add to the list. + */ +void wakeup_source_add(struct wakeup_source *ws) +{ + if (WARN_ON(!ws)) + return; + + setup_timer(&ws->timer, pm_wakeup_timer_fn, (unsigned long)ws); + ws->active = false; + + spin_lock_irq(&events_lock); + list_add_rcu(&ws->entry, &wakeup_sources); + spin_unlock_irq(&events_lock); + synchronize_rcu(); +} +EXPORT_SYMBOL_GPL(wakeup_source_add); + +/** + * wakeup_source_remove - Remove given object from the wakeup sources list. + * @ws: Wakeup source object to remove from the list. + */ +void wakeup_source_remove(struct wakeup_source *ws) +{ + if (WARN_ON(!ws)) + return; + + spin_lock_irq(&events_lock); + list_del_rcu(&ws->entry); + spin_unlock_irq(&events_lock); + synchronize_rcu(); +} +EXPORT_SYMBOL_GPL(wakeup_source_remove); + +/** + * wakeup_source_register - Create wakeup source and add it to the list. + * @name: Name of the wakeup source to register. + */ +struct wakeup_source *wakeup_source_register(const char *name) +{ + struct wakeup_source *ws; + + ws = wakeup_source_create(name); + if (ws) + wakeup_source_add(ws); + + return ws; +} +EXPORT_SYMBOL_GPL(wakeup_source_register); + +/** + * wakeup_source_unregister - Remove wakeup source from the list and remove it. + * @ws: Wakeup source object to unregister. + */ +void wakeup_source_unregister(struct wakeup_source *ws) +{ + wakeup_source_remove(ws); + wakeup_source_destroy(ws); +} +EXPORT_SYMBOL_GPL(wakeup_source_unregister); + +/** + * device_wakeup_attach - Attach a wakeup source object to a device object. + * @dev: Device to handle. + * @ws: Wakeup source object to attach to @dev. + * + * This causes @dev to be treated as a wakeup device. + */ +static int device_wakeup_attach(struct device *dev, struct wakeup_source *ws) +{ + spin_lock_irq(&dev->power.lock); + if (dev->power.wakeup) { + spin_unlock_irq(&dev->power.lock); + return -EEXIST; + } + dev->power.wakeup = ws; + spin_unlock_irq(&dev->power.lock); + return 0; +} + +/** + * device_wakeup_enable - Enable given device to be a wakeup source. + * @dev: Device to handle. + * + * Create a wakeup source object, register it and attach it to @dev. + */ +int device_wakeup_enable(struct device *dev) +{ + struct wakeup_source *ws; + int ret; + + if (!dev || !dev->power.can_wakeup) + return -EINVAL; + + ws = wakeup_source_register(dev_name(dev)); + if (!ws) + return -ENOMEM; + + ret = device_wakeup_attach(dev, ws); + if (ret) + wakeup_source_unregister(ws); + + return ret; +} +EXPORT_SYMBOL_GPL(device_wakeup_enable); + +/** + * device_wakeup_detach - Detach a device's wakeup source object from it. + * @dev: Device to detach the wakeup source object from. + * + * After it returns, @dev will not be treated as a wakeup device any more. + */ +static struct wakeup_source *device_wakeup_detach(struct device *dev) +{ + struct wakeup_source *ws; + + spin_lock_irq(&dev->power.lock); + ws = dev->power.wakeup; + dev->power.wakeup = NULL; + spin_unlock_irq(&dev->power.lock); + return ws; +} + +/** + * device_wakeup_disable - Do not regard a device as a wakeup source any more. + * @dev: Device to handle. + * + * Detach the @dev's wakeup source object from it, unregister this wakeup source + * object and destroy it. + */ +int device_wakeup_disable(struct device *dev) +{ + struct wakeup_source *ws; + + if (!dev || !dev->power.can_wakeup) + return -EINVAL; + + ws = device_wakeup_detach(dev); + if (ws) + wakeup_source_unregister(ws); + + return 0; +} +EXPORT_SYMBOL_GPL(device_wakeup_disable); + +/** + * device_init_wakeup - Device wakeup initialization. + * @dev: Device to handle. + * @enable: Whether or not to enable @dev as a wakeup device. + * + * By default, most devices should leave wakeup disabled. The exceptions are + * devices that everyone expects to be wakeup sources: keyboards, power buttons, + * possibly network interfaces, etc. + */ +int device_init_wakeup(struct device *dev, bool enable) +{ + int ret = 0; + + if (enable) { + device_set_wakeup_capable(dev, true); + ret = device_wakeup_enable(dev); + } else { + device_set_wakeup_capable(dev, false); + } + + return ret; +} +EXPORT_SYMBOL_GPL(device_init_wakeup); + +/** + * device_set_wakeup_enable - Enable or disable a device to wake up the system. + * @dev: Device to handle. + */ +int device_set_wakeup_enable(struct device *dev, bool enable) +{ + if (!dev || !dev->power.can_wakeup) + return -EINVAL; + + return enable ? device_wakeup_enable(dev) : device_wakeup_disable(dev); +} +EXPORT_SYMBOL_GPL(device_set_wakeup_enable); /* * The functions below use the observation that each wakeup event starts a @@ -55,118 +286,259 @@ static unsigned long events_timer_expires; * knowledge, however, may not be available to it, so it can simply specify time * to wait before the system can be suspended and pass it as the second * argument of pm_wakeup_event(). + * + * It is valid to call pm_relax() after pm_wakeup_event(), in which case the + * "no suspend" period will be ended either by the pm_relax(), or by the timer + * function executed when the timer expires, whichever comes first. */ /** + * wakup_source_activate - Mark given wakeup source as active. + * @ws: Wakeup source to handle. + * + * Update the @ws' statistics and, if @ws has just been activated, notify the PM + * core of the event by incrementing the counter of of wakeup events being + * processed. + */ +static void wakeup_source_activate(struct wakeup_source *ws) +{ + ws->active = true; + ws->active_count++; + ws->timer_expires = jiffies; + ws->last_time = ktime_get(); + + atomic_inc(&events_in_progress); +} + +/** + * __pm_stay_awake - Notify the PM core of a wakeup event. + * @ws: Wakeup source object associated with the source of the event. + * + * It is safe to call this function from interrupt context. + */ +void __pm_stay_awake(struct wakeup_source *ws) +{ + unsigned long flags; + + if (!ws) + return; + + spin_lock_irqsave(&ws->lock, flags); + ws->event_count++; + if (!ws->active) + wakeup_source_activate(ws); + spin_unlock_irqrestore(&ws->lock, flags); +} +EXPORT_SYMBOL_GPL(__pm_stay_awake); + +/** * pm_stay_awake - Notify the PM core that a wakeup event is being processed. * @dev: Device the wakeup event is related to. * - * Notify the PM core of a wakeup event (signaled by @dev) by incrementing the - * counter of wakeup events being processed. If @dev is not NULL, the counter - * of wakeup events related to @dev is incremented too. + * Notify the PM core of a wakeup event (signaled by @dev) by calling + * __pm_stay_awake for the @dev's wakeup source object. * * Call this function after detecting of a wakeup event if pm_relax() is going * to be called directly after processing the event (and possibly passing it to * user space for further processing). - * - * It is safe to call this function from interrupt context. */ void pm_stay_awake(struct device *dev) { unsigned long flags; - spin_lock_irqsave(&events_lock, flags); - if (dev) - dev->power.wakeup_count++; + if (!dev) + return; - events_in_progress++; - spin_unlock_irqrestore(&events_lock, flags); + spin_lock_irqsave(&dev->power.lock, flags); + __pm_stay_awake(dev->power.wakeup); + spin_unlock_irqrestore(&dev->power.lock, flags); } +EXPORT_SYMBOL_GPL(pm_stay_awake); /** - * pm_relax - Notify the PM core that processing of a wakeup event has ended. + * wakup_source_deactivate - Mark given wakeup source as inactive. + * @ws: Wakeup source to handle. * - * Notify the PM core that a wakeup event has been processed by decrementing - * the counter of wakeup events being processed and incrementing the counter - * of registered wakeup events. + * Update the @ws' statistics and notify the PM core that the wakeup source has + * become inactive by decrementing the counter of wakeup events being processed + * and incrementing the counter of registered wakeup events. + */ +static void wakeup_source_deactivate(struct wakeup_source *ws) +{ + ktime_t duration; + ktime_t now; + + ws->relax_count++; + /* + * __pm_relax() may be called directly or from a timer function. + * If it is called directly right after the timer function has been + * started, but before the timer function calls __pm_relax(), it is + * possible that __pm_stay_awake() will be called in the meantime and + * will set ws->active. Then, ws->active may be cleared immediately + * by the __pm_relax() called from the timer function, but in such a + * case ws->relax_count will be different from ws->active_count. + */ + if (ws->relax_count != ws->active_count) { + ws->relax_count--; + return; + } + + ws->active = false; + + now = ktime_get(); + duration = ktime_sub(now, ws->last_time); + ws->total_time = ktime_add(ws->total_time, duration); + if (ktime_to_ns(duration) > ktime_to_ns(ws->max_time)) + ws->max_time = duration; + + del_timer(&ws->timer); + + /* + * event_count has to be incremented before events_in_progress is + * modified, so that the callers of pm_check_wakeup_events() and + * pm_save_wakeup_count() don't see the old value of event_count and + * events_in_progress equal to zero at the same time. + */ + atomic_inc(&event_count); + smp_mb__before_atomic_dec(); + atomic_dec(&events_in_progress); +} + +/** + * __pm_relax - Notify the PM core that processing of a wakeup event has ended. + * @ws: Wakeup source object associated with the source of the event. * * Call this function for wakeup events whose processing started with calling - * pm_stay_awake(). + * __pm_stay_awake(). * * It is safe to call it from interrupt context. */ -void pm_relax(void) +void __pm_relax(struct wakeup_source *ws) { unsigned long flags; - spin_lock_irqsave(&events_lock, flags); - if (events_in_progress) { - events_in_progress--; - event_count++; - } - spin_unlock_irqrestore(&events_lock, flags); + if (!ws) + return; + + spin_lock_irqsave(&ws->lock, flags); + if (ws->active) + wakeup_source_deactivate(ws); + spin_unlock_irqrestore(&ws->lock, flags); +} +EXPORT_SYMBOL_GPL(__pm_relax); + +/** + * pm_relax - Notify the PM core that processing of a wakeup event has ended. + * @dev: Device that signaled the event. + * + * Execute __pm_relax() for the @dev's wakeup source object. + */ +void pm_relax(struct device *dev) +{ + unsigned long flags; + + if (!dev) + return; + + spin_lock_irqsave(&dev->power.lock, flags); + __pm_relax(dev->power.wakeup); + spin_unlock_irqrestore(&dev->power.lock, flags); } +EXPORT_SYMBOL_GPL(pm_relax); /** * pm_wakeup_timer_fn - Delayed finalization of a wakeup event. + * @data: Address of the wakeup source object associated with the event source. * - * Decrease the counter of wakeup events being processed after it was increased - * by pm_wakeup_event(). + * Call __pm_relax() for the wakeup source whose address is stored in @data. */ static void pm_wakeup_timer_fn(unsigned long data) { + __pm_relax((struct wakeup_source *)data); +} + +/** + * __pm_wakeup_event - Notify the PM core of a wakeup event. + * @ws: Wakeup source object associated with the event source. + * @msec: Anticipated event processing time (in milliseconds). + * + * Notify the PM core of a wakeup event whose source is @ws that will take + * approximately @msec milliseconds to be processed by the kernel. If @ws is + * not active, activate it. If @msec is nonzero, set up the @ws' timer to + * execute pm_wakeup_timer_fn() in future. + * + * It is safe to call this function from interrupt context. + */ +void __pm_wakeup_event(struct wakeup_source *ws, unsigned int msec) +{ unsigned long flags; + unsigned long expires; - spin_lock_irqsave(&events_lock, flags); - if (events_timer_expires - && time_before_eq(events_timer_expires, jiffies)) { - events_in_progress--; - events_timer_expires = 0; + if (!ws) + return; + + spin_lock_irqsave(&ws->lock, flags); + + ws->event_count++; + if (!ws->active) + wakeup_source_activate(ws); + + if (!msec) { + wakeup_source_deactivate(ws); + goto unlock; } - spin_unlock_irqrestore(&events_lock, flags); + + expires = jiffies + msecs_to_jiffies(msec); + if (!expires) + expires = 1; + + if (time_after(expires, ws->timer_expires)) { + mod_timer(&ws->timer, expires); + ws->timer_expires = expires; + } + + unlock: + spin_unlock_irqrestore(&ws->lock, flags); } +EXPORT_SYMBOL_GPL(__pm_wakeup_event); + /** * pm_wakeup_event - Notify the PM core of a wakeup event. * @dev: Device the wakeup event is related to. * @msec: Anticipated event processing time (in milliseconds). * - * Notify the PM core of a wakeup event (signaled by @dev) that will take - * approximately @msec milliseconds to be processed by the kernel. Increment - * the counter of registered wakeup events and (if @msec is nonzero) set up - * the wakeup events timer to execute pm_wakeup_timer_fn() in future (if the - * timer has not been set up already, increment the counter of wakeup events - * being processed). If @dev is not NULL, the counter of wakeup events related - * to @dev is incremented too. - * - * It is safe to call this function from interrupt context. + * Call __pm_wakeup_event() for the @dev's wakeup source object. */ void pm_wakeup_event(struct device *dev, unsigned int msec) { unsigned long flags; - spin_lock_irqsave(&events_lock, flags); - event_count++; - if (dev) - dev->power.wakeup_count++; - - if (msec) { - unsigned long expires; + if (!dev) + return; - expires = jiffies + msecs_to_jiffies(msec); - if (!expires) - expires = 1; + spin_lock_irqsave(&dev->power.lock, flags); + __pm_wakeup_event(dev->power.wakeup, msec); + spin_unlock_irqrestore(&dev->power.lock, flags); +} +EXPORT_SYMBOL_GPL(pm_wakeup_event); - if (!events_timer_expires - || time_after(expires, events_timer_expires)) { - if (!events_timer_expires) - events_in_progress++; +/** + * pm_wakeup_update_hit_counts - Update hit counts of all active wakeup sources. + */ +static void pm_wakeup_update_hit_counts(void) +{ + unsigned long flags; + struct wakeup_source *ws; - mod_timer(&events_timer, expires); - events_timer_expires = expires; - } + rcu_read_lock(); + list_for_each_entry_rcu(ws, &wakeup_sources, entry) { + spin_lock_irqsave(&ws->lock, flags); + if (ws->active) + ws->hit_count++; + spin_unlock_irqrestore(&ws->lock, flags); } - spin_unlock_irqrestore(&events_lock, flags); + rcu_read_unlock(); } /** @@ -184,10 +556,13 @@ bool pm_check_wakeup_events(void) spin_lock_irqsave(&events_lock, flags); if (events_check_enabled) { - ret = (event_count == saved_event_count) && !events_in_progress; + ret = ((unsigned int)atomic_read(&event_count) == saved_count) + && !atomic_read(&events_in_progress); events_check_enabled = ret; } spin_unlock_irqrestore(&events_lock, flags); + if (!ret) + pm_wakeup_update_hit_counts(); return ret; } @@ -202,24 +577,20 @@ bool pm_check_wakeup_events(void) * drop down to zero has been interrupted by a signal (and the current number * of wakeup events being processed is still nonzero). Otherwise return true. */ -bool pm_get_wakeup_count(unsigned long *count) +bool pm_get_wakeup_count(unsigned int *count) { bool ret; - spin_lock_irq(&events_lock); if (capable(CAP_SYS_ADMIN)) events_check_enabled = false; - while (events_in_progress && !signal_pending(current)) { - spin_unlock_irq(&events_lock); - - schedule_timeout_interruptible(msecs_to_jiffies(100)); - - spin_lock_irq(&events_lock); + while (atomic_read(&events_in_progress) && !signal_pending(current)) { + pm_wakeup_update_hit_counts(); + schedule_timeout_interruptible(msecs_to_jiffies(TIMEOUT)); } - *count = event_count; - ret = !events_in_progress; - spin_unlock_irq(&events_lock); + + ret = !atomic_read(&events_in_progress); + *count = atomic_read(&event_count); return ret; } @@ -232,16 +603,102 @@ bool pm_get_wakeup_count(unsigned long *count) * old number of registered wakeup events to be used by pm_check_wakeup_events() * and return true. Otherwise return false. */ -bool pm_save_wakeup_count(unsigned long count) +bool pm_save_wakeup_count(unsigned int count) { bool ret = false; spin_lock_irq(&events_lock); - if (count == event_count && !events_in_progress) { - saved_event_count = count; + if (count == (unsigned int)atomic_read(&event_count) + && !atomic_read(&events_in_progress)) { + saved_count = count; events_check_enabled = true; ret = true; } spin_unlock_irq(&events_lock); + if (!ret) + pm_wakeup_update_hit_counts(); + return ret; +} + +static struct dentry *wakeup_sources_stats_dentry; + +/** + * print_wakeup_source_stats - Print wakeup source statistics information. + * @m: seq_file to print the statistics into. + * @ws: Wakeup source object to print the statistics for. + */ +static int print_wakeup_source_stats(struct seq_file *m, + struct wakeup_source *ws) +{ + unsigned long flags; + ktime_t total_time; + ktime_t max_time; + unsigned long active_count; + ktime_t active_time; + int ret; + + spin_lock_irqsave(&ws->lock, flags); + + total_time = ws->total_time; + max_time = ws->max_time; + active_count = ws->active_count; + if (ws->active) { + active_time = ktime_sub(ktime_get(), ws->last_time); + total_time = ktime_add(total_time, active_time); + if (active_time.tv64 > max_time.tv64) + max_time = active_time; + } else { + active_time = ktime_set(0, 0); + } + + ret = seq_printf(m, "%-12s\t%lu\t\t%lu\t\t%lu\t\t" + "%lld\t\t%lld\t\t%lld\t\t%lld\n", + ws->name, active_count, ws->event_count, ws->hit_count, + ktime_to_ms(active_time), ktime_to_ms(total_time), + ktime_to_ms(max_time), ktime_to_ms(ws->last_time)); + + spin_unlock_irqrestore(&ws->lock, flags); + return ret; } + +/** + * wakeup_sources_stats_show - Print wakeup sources statistics information. + * @m: seq_file to print the statistics into. + */ +static int wakeup_sources_stats_show(struct seq_file *m, void *unused) +{ + struct wakeup_source *ws; + + seq_puts(m, "name\t\tactive_count\tevent_count\thit_count\t" + "active_since\ttotal_time\tmax_time\tlast_change\n"); + + rcu_read_lock(); + list_for_each_entry_rcu(ws, &wakeup_sources, entry) + print_wakeup_source_stats(m, ws); + rcu_read_unlock(); + + return 0; +} + +static int wakeup_sources_stats_open(struct inode *inode, struct file *file) +{ + return single_open(file, wakeup_sources_stats_show, NULL); +} + +static const struct file_operations wakeup_sources_stats_fops = { + .owner = THIS_MODULE, + .open = wakeup_sources_stats_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init wakeup_sources_debugfs_init(void) +{ + wakeup_sources_stats_dentry = debugfs_create_file("wakeup_sources", + S_IRUGO, NULL, NULL, &wakeup_sources_stats_fops); + return 0; +} + +postcore_initcall(wakeup_sources_debugfs_init); diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index d52e90a5a617..4104b7feae67 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -39,7 +39,6 @@ #include <linux/skbuff.h> #include <linux/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -865,8 +864,7 @@ static int bluecard_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; return bluecard_config(link); } @@ -886,7 +884,7 @@ static int bluecard_config(struct pcmcia_device *link) bluecard_info_t *info = link->priv; int i, n; - link->conf.ConfigIndex = 0x20; + link->config_index = 0x20; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 64; @@ -906,7 +904,7 @@ static int bluecard_config(struct pcmcia_device *link) if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; @@ -942,9 +940,7 @@ MODULE_DEVICE_TABLE(pcmcia, bluecard_ids); static struct pcmcia_driver bluecard_driver = { .owner = THIS_MODULE, - .drv = { - .name = "bluecard_cs", - }, + .name = "bluecard_cs", .probe = bluecard_probe, .remove = bluecard_detach, .id_table = bluecard_ids, diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 7ab8f29d5e0d..0c8a65587491 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -45,7 +45,6 @@ #include <linux/device.h> #include <linux/firmware.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -657,11 +656,8 @@ static int bt3c_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_SET_IO; return bt3c_config(link); } @@ -675,43 +671,41 @@ static void bt3c_detach(struct pcmcia_device *link) kfree(info); } -static int bt3c_check_config(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int bt3c_check_config(struct pcmcia_device *p_dev, void *priv_data) { - unsigned long try = (unsigned long) priv_data; + int *try = priv_data; - p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (try == 0) + p_dev->io_lines = 16; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && - (cf->io.win[0].base != 0)) { - p_dev->resource[0]->start = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0)) + return -EINVAL; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; int j; - if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } @@ -742,7 +736,7 @@ found_port: if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; @@ -775,9 +769,7 @@ MODULE_DEVICE_TABLE(pcmcia, bt3c_ids); static struct pcmcia_driver bt3c_driver = { .owner = THIS_MODULE, - .drv = { - .name = "bt3c_cs", - }, + .name = "bt3c_cs", .probe = bt3c_probe, .remove = bt3c_detach, .id_table = bt3c_ids, diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 1c4f5e863b03..f8a0708e2311 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -41,7 +41,6 @@ #include <asm/system.h> #include <asm/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -586,11 +585,8 @@ static int btuart_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_SET_IO; return btuart_config(link); } @@ -604,43 +600,41 @@ static void btuart_detach(struct pcmcia_device *link) kfree(info); } -static int btuart_check_config(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int btuart_check_config(struct pcmcia_device *p_dev, void *priv_data) { int *try = priv_data; - p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (try == 0) + p_dev->io_lines = 16; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && - (cf->io.win[0].base != 0)) { - p_dev->resource[0]->start = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0)) + return -EINVAL; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int btuart_check_config_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; int j; - if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } @@ -671,7 +665,7 @@ found_port: if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; @@ -703,9 +697,7 @@ MODULE_DEVICE_TABLE(pcmcia, btuart_ids); static struct pcmcia_driver btuart_driver = { .owner = THIS_MODULE, - .drv = { - .name = "btuart_cs", - }, + .name = "btuart_cs", .probe = btuart_probe, .remove = btuart_detach, .id_table = btuart_ids, diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index db7c8db695fc..26ee0cf88d20 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -41,7 +41,6 @@ #include <asm/system.h> #include <asm/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -572,11 +571,7 @@ static int dtl1_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return dtl1_config(link); } @@ -591,18 +586,14 @@ static void dtl1_detach(struct pcmcia_device *link) kfree(info); } -static int dtl1_confcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int dtl1_confcheck(struct pcmcia_device *p_dev, void *priv_data) { - if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8)) + if ((p_dev->resource[1]->end) || (p_dev->resource[1]->end < 8)) return -ENODEV; - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[0]->end = cf->io.win[0].len; /*yo */ - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + return pcmcia_request_io(p_dev); } @@ -620,7 +611,7 @@ static int dtl1_config(struct pcmcia_device *link) if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; @@ -656,9 +647,7 @@ MODULE_DEVICE_TABLE(pcmcia, dtl1_ids); static struct pcmcia_driver dtl1_driver = { .owner = THIS_MODULE, - .drv = { - .name = "dtl1_cs", - }, + .name = "dtl1_cs", .probe = dtl1_probe, .remove = dtl1_detach, .id_table = dtl1_ids, diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index ec73d9f6d9ed..c7b482d15e2a 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -34,7 +34,6 @@ #include <linux/uaccess.h> #include <linux/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -55,8 +54,6 @@ __func__ , ## args); \ } while (0) -static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte"; - #define T_1SEC (HZ) #define T_10MSEC msecs_to_jiffies(10) #define T_20MSEC msecs_to_jiffies(20) @@ -1742,20 +1739,8 @@ static void cmm_cm4000_release(struct pcmcia_device * link) /*==== Interface to PCMCIA Layer =======================================*/ -static int cm4000_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int cm4000_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (!cfg->io.nwin) - return -ENODEV; - - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; - return pcmcia_request_io(p_dev); } @@ -1763,13 +1748,13 @@ static int cm4000_config(struct pcmcia_device * link, int devno) { struct cm4000_dev *dev; + link->config_flags |= CONF_AUTO_SET_IO; + /* read the config-tuples */ if (pcmcia_loop_config(link, cm4000_config_check, NULL)) goto cs_release; - link->conf.IntType = 00000002; - - if (pcmcia_request_configuration(link, &link->conf)) + if (pcmcia_enable_device(link)) goto cs_release; dev = link->priv; @@ -1829,7 +1814,6 @@ static int cm4000_probe(struct pcmcia_device *link) dev->p_dev = link; link->priv = dev; - link->conf.IntType = INT_MEMORY_AND_IO; dev_table[i] = link; init_waitqueue_head(&dev->devq); @@ -1891,9 +1875,7 @@ MODULE_DEVICE_TABLE(pcmcia, cm4000_ids); static struct pcmcia_driver cm4000_driver = { .owner = THIS_MODULE, - .drv = { - .name = "cm4000_cs", - }, + .name = "cm4000_cs", .probe = cm4000_probe, .remove = cm4000_detach, .suspend = cm4000_suspend, @@ -1905,8 +1887,6 @@ static int __init cmm_init(void) { int rc; - printk(KERN_INFO "%s\n", version); - cmm_class = class_create(THIS_MODULE, "cardman_4000"); if (IS_ERR(cmm_class)) return PTR_ERR(cmm_class); @@ -1931,7 +1911,6 @@ static int __init cmm_init(void) static void __exit cmm_exit(void) { - printk(KERN_INFO MODULE_NAME ": unloading\n"); pcmcia_unregister_driver(&cm4000_driver); unregister_chrdev(major, DEVICE_NAME); class_destroy(cmm_class); diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index 815cde1d0570..bf2f046fc2c1 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -29,7 +29,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -49,9 +48,6 @@ __func__ , ## args); \ } while (0) -static char *version = -"OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte"; - #define CCID_DRIVER_BULK_DEFAULT_TIMEOUT (150*HZ) #define CCID_DRIVER_ASYNC_POWERUP_TIMEOUT (35*HZ) #define CCID_DRIVER_MINIMUM_TIMEOUT (3*HZ) @@ -516,26 +512,9 @@ static void cm4040_reader_release(struct pcmcia_device *link) return; } -static int cm4040_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int cm4040_config_check(struct pcmcia_device *p_dev, void *priv_data) { - int rc; - if (!cfg->io.nwin) - return -ENODEV; - - /* Get the IOaddr */ - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; - rc = pcmcia_request_io(p_dev); - - dev_printk(KERN_INFO, &p_dev->dev, - "pcmcia_request_io returned 0x%x\n", rc); - return rc; + return pcmcia_request_io(p_dev); } @@ -544,15 +523,15 @@ static int reader_config(struct pcmcia_device *link, int devno) struct reader_dev *dev; int fail_rc; + link->config_flags |= CONF_AUTO_SET_IO; + if (pcmcia_loop_config(link, cm4040_config_check, NULL)) goto cs_release; - link->conf.IntType = 00000002; - - fail_rc = pcmcia_request_configuration(link, &link->conf); + fail_rc = pcmcia_enable_device(link); if (fail_rc != 0) { dev_printk(KERN_INFO, &link->dev, - "pcmcia_request_configuration failed 0x%x\n", + "pcmcia_enable_device failed 0x%x\n", fail_rc); goto cs_release; } @@ -599,7 +578,6 @@ static int reader_probe(struct pcmcia_device *link) link->priv = dev; dev->p_dev = link; - link->conf.IntType = INT_MEMORY_AND_IO; dev_table[i] = link; init_waitqueue_head(&dev->devq); @@ -662,9 +640,7 @@ MODULE_DEVICE_TABLE(pcmcia, cm4040_ids); static struct pcmcia_driver reader_driver = { .owner = THIS_MODULE, - .drv = { - .name = "cm4040_cs", - }, + .name = "cm4040_cs", .probe = reader_probe, .remove = reader_detach, .id_table = cm4040_ids, @@ -674,7 +650,6 @@ static int __init cm4040_init(void) { int rc; - printk(KERN_INFO "%s\n", version); cmx_class = class_create(THIS_MODULE, "cardman_4040"); if (IS_ERR(cmx_class)) return PTR_ERR(cmx_class); @@ -699,7 +674,6 @@ static int __init cm4040_init(void) static void __exit cm4040_exit(void) { - printk(KERN_INFO MODULE_NAME ": unloading\n"); pcmcia_unregister_driver(&reader_driver); unregister_chrdev(major, DEVICE_NAME); class_destroy(cmx_class); diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 67bdb05798b1..94b8eb4d691d 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -32,7 +32,6 @@ #include <pcmcia/device_id.h> #include <pcmcia/ss.h> #include <pcmcia/ds.h> -#include <pcmcia/cs.h> static struct pcmcia_device_id ipw_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100), @@ -76,23 +75,18 @@ static void signalled_reboot_callback(void *callback_data) schedule_work(&ipw->work_reboot); } -static int ipwireless_probe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) { struct ipw_dev *ipw = priv_data; struct resource *io_resource; int ret; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; /* 0x40 causes it to generate level mode interrupts. */ /* 0x04 enables IREQ pin. */ - p_dev->conf.ConfigIndex = cfg->index | 0x44; + p_dev->config_index |= 0x44; p_dev->io_lines = 16; ret = pcmcia_request_io(p_dev); if (ret) @@ -102,65 +96,49 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, resource_size(p_dev->resource[0]), IPWIRELESS_PCCARD_NAME); - if (cfg->mem.nwin == 0) - return 0; - - ipw->request_common_memory.Attributes = + p_dev->resource[2]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE; - ipw->request_common_memory.Base = cfg->mem.win[0].host_addr; - ipw->request_common_memory.Size = cfg->mem.win[0].len; - if (ipw->request_common_memory.Size < 0x1000) - ipw->request_common_memory.Size = 0x1000; - ipw->request_common_memory.AccessSpeed = 0; - - ret = pcmcia_request_window(p_dev, &ipw->request_common_memory, - &ipw->handle_common_memory); + ret = pcmcia_request_window(p_dev, p_dev->resource[2], 0); if (ret != 0) goto exit1; - ret = pcmcia_map_mem_page(p_dev, ipw->handle_common_memory, - cfg->mem.win[0].card_addr); - + ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr); if (ret != 0) goto exit2; - ipw->is_v2_card = cfg->mem.win[0].len == 0x100; + ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100; - ipw->common_memory = ioremap(ipw->request_common_memory.Base, - ipw->request_common_memory.Size); - request_mem_region(ipw->request_common_memory.Base, - ipw->request_common_memory.Size, + ipw->attr_memory = ioremap(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); + request_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2]), IPWIRELESS_PCCARD_NAME); - ipw->request_attr_memory.Attributes = - WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | WIN_ENABLE; - ipw->request_attr_memory.Base = 0; - ipw->request_attr_memory.Size = 0; /* this used to be 0x1000 */ - ipw->request_attr_memory.AccessSpeed = 0; - - ret = pcmcia_request_window(p_dev, &ipw->request_attr_memory, - &ipw->handle_attr_memory); - + p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | + WIN_ENABLE; + p_dev->resource[3]->end = 0; /* this used to be 0x1000 */ + ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0); if (ret != 0) goto exit2; - ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory, 0); + ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0); if (ret != 0) goto exit3; - ipw->attr_memory = ioremap(ipw->request_attr_memory.Base, - ipw->request_attr_memory.Size); - request_mem_region(ipw->request_attr_memory.Base, - ipw->request_attr_memory.Size, IPWIRELESS_PCCARD_NAME); + ipw->attr_memory = ioremap(p_dev->resource[3]->start, + resource_size(p_dev->resource[3])); + request_mem_region(p_dev->resource[3]->start, + resource_size(p_dev->resource[3]), + IPWIRELESS_PCCARD_NAME); return 0; exit3: exit2: if (ipw->common_memory) { - release_mem_region(ipw->request_common_memory.Base, - ipw->request_common_memory.Size); + release_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); iounmap(ipw->common_memory); } exit1: @@ -175,14 +153,13 @@ static int config_ipwireless(struct ipw_dev *ipw) int ret = 0; ipw->is_v2_card = 0; + link->config_flags |= CONF_AUTO_SET_IO | CONF_AUTO_SET_IOMEM | + CONF_ENABLE_IRQ; ret = pcmcia_loop_config(link, ipwireless_probe, ipw); if (ret != 0) return ret; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - INIT_WORK(&ipw->work_reboot, signalled_reboot_work); ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start, @@ -201,13 +178,9 @@ static int config_ipwireless(struct ipw_dev *ipw) (unsigned int) link->irq); if (ipw->attr_memory && ipw->common_memory) printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": attr memory 0x%08lx-0x%08lx, common memory 0x%08lx-0x%08lx\n", - ipw->request_attr_memory.Base, - ipw->request_attr_memory.Base - + ipw->request_attr_memory.Size - 1, - ipw->request_common_memory.Base, - ipw->request_common_memory.Base - + ipw->request_common_memory.Size - 1); + ": attr memory %pR, common memory %pR\n", + link->resource[3], + link->resource[2]); ipw->network = ipwireless_network_create(ipw->hardware); if (!ipw->network) @@ -223,25 +196,23 @@ static int config_ipwireless(struct ipw_dev *ipw) * Do the RequestConfiguration last, because it enables interrupts. * Then we don't get any interrupts before we're ready for them. */ - ret = pcmcia_request_configuration(link, &link->conf); - + ret = pcmcia_enable_device(link); if (ret != 0) goto exit; return 0; exit: - if (ipw->attr_memory) { - release_mem_region(ipw->request_attr_memory.Base, - ipw->request_attr_memory.Size); - iounmap(ipw->attr_memory); - - } if (ipw->common_memory) { - release_mem_region(ipw->request_common_memory.Base, - ipw->request_common_memory.Size); + release_mem_region(link->resource[2]->start, + resource_size(link->resource[2])); iounmap(ipw->common_memory); } + if (ipw->attr_memory) { + release_mem_region(link->resource[3]->start, + resource_size(link->resource[3])); + iounmap(ipw->attr_memory); + } pcmcia_disable_device(link); return -1; } @@ -249,13 +220,13 @@ exit: static void release_ipwireless(struct ipw_dev *ipw) { if (ipw->common_memory) { - release_mem_region(ipw->request_common_memory.Base, - ipw->request_common_memory.Size); + release_mem_region(ipw->link->resource[2]->start, + resource_size(ipw->link->resource[2])); iounmap(ipw->common_memory); } if (ipw->attr_memory) { - release_mem_region(ipw->request_attr_memory.Base, - ipw->request_attr_memory.Size); + release_mem_region(ipw->link->resource[3]->start, + resource_size(ipw->link->resource[3])); iounmap(ipw->attr_memory); } pcmcia_disable_device(ipw->link); @@ -324,7 +295,7 @@ static struct pcmcia_driver me = { .owner = THIS_MODULE, .probe = ipwireless_attach, .remove = ipwireless_detach, - .drv = { .name = IPWIRELESS_PCCARD_NAME }, + .name = IPWIRELESS_PCCARD_NAME, .id_table = ipw_ids }; @@ -336,9 +307,6 @@ static int __init init_ipwireless(void) { int ret; - printk(KERN_INFO IPWIRELESS_PCCARD_NAME " " - IPWIRELESS_PCMCIA_VERSION " by " IPWIRELESS_PCMCIA_AUTHOR "\n"); - ret = ipwireless_tty_init(); if (ret != 0) return ret; @@ -355,9 +323,6 @@ static int __init init_ipwireless(void) */ static void __exit exit_ipwireless(void) { - printk(KERN_INFO IPWIRELESS_PCCARD_NAME " " - IPWIRELESS_PCMCIA_VERSION " removed\n"); - pcmcia_unregister_driver(&me); ipwireless_tty_release(); } diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/char/pcmcia/ipwireless/main.h index c207be87b597..f2cbb116bccb 100644 --- a/drivers/char/pcmcia/ipwireless/main.h +++ b/drivers/char/pcmcia/ipwireless/main.h @@ -21,7 +21,6 @@ #include <linux/sched.h> #include <linux/types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -45,13 +44,9 @@ struct ipw_dev { struct pcmcia_device *link; int is_v2_card; - window_handle_t handle_attr_memory; void __iomem *attr_memory; - win_req_t request_attr_memory; - window_handle_t handle_common_memory; void __iomem *common_memory; - win_req_t request_common_memory; /* Reference to attribute memory, containing CIS data */ void *attribute_memory; diff --git a/drivers/char/pcmcia/ipwireless/tty.h b/drivers/char/pcmcia/ipwireless/tty.h index 3e163d4cab15..747b2d637860 100644 --- a/drivers/char/pcmcia/ipwireless/tty.h +++ b/drivers/char/pcmcia/ipwireless/tty.h @@ -21,7 +21,6 @@ #include <linux/types.h> #include <linux/sched.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 9ecd6bef5d3b..be1810057607 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -70,7 +70,6 @@ #include <linux/workqueue.h> #include <linux/hdlc.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -550,9 +549,6 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Initialize the struct pcmcia_device structure */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - ret = mgslpc_config(link); if (ret) return ret; @@ -565,20 +561,8 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Card has been inserted. */ -static int mgslpc_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int mgslpc_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { - if (!cfg->io.nwin) - return -ENODEV; - - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; - return pcmcia_request_io(p_dev); } @@ -590,32 +574,24 @@ static int mgslpc_config(struct pcmcia_device *link) if (debug_level >= DEBUG_LEVEL_INFO) printk("mgslpc_config(0x%p)\n", link); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL); if (ret != 0) goto failed; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 8; - link->conf.Present = PRESENT_OPTION; + link->config_index = 8; + link->config_regs = PRESENT_OPTION; ret = pcmcia_request_irq(link, mgslpc_isr); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; info->io_base = link->resource[0]->start; info->irq_level = link->irq; - - dev_info(&link->dev, "index 0x%02x:", - link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - printk("\n"); return 0; failed: @@ -2797,9 +2773,7 @@ MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids); static struct pcmcia_driver mgslpc_driver = { .owner = THIS_MODULE, - .drv = { - .name = "synclink_cs", - }, + .name = "synclink_cs", .probe = mgslpc_probe, .remove = mgslpc_detach, .id_table = mgslpc_ids, @@ -2835,8 +2809,6 @@ static void synclink_cs_cleanup(void) { int rc; - printk("Unloading %s: version %s\n", driver_name, driver_version); - while(mgslpc_device_list) mgslpc_remove_device(mgslpc_device_list); @@ -2859,8 +2831,6 @@ static int __init synclink_cs_init(void) BREAKPOINT(); } - printk("%s %s\n", driver_name, driver_version); - if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0) return rc; @@ -4127,6 +4097,8 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) if (cmd != SIOCWANDEV) return hdlc_ioctl(dev, ifr, cmd); + memset(&new_line, 0, size); + switch(ifr->ifr_settings.type) { case IF_GET_IFACE: /* return current sync_serial_settings */ diff --git a/drivers/gpio/tc35892-gpio.c b/drivers/gpio/tc35892-gpio.c index 1be6288780de..7e10c935a047 100644 --- a/drivers/gpio/tc35892-gpio.c +++ b/drivers/gpio/tc35892-gpio.c @@ -322,6 +322,9 @@ static int __devinit tc35892_gpio_probe(struct platform_device *pdev) goto out_freeirq; } + if (pdata->setup) + pdata->setup(tc35892, tc35892_gpio->chip.base); + platform_set_drvdata(pdev, tc35892_gpio); return 0; @@ -338,9 +341,14 @@ out_free: static int __devexit tc35892_gpio_remove(struct platform_device *pdev) { struct tc35892_gpio *tc35892_gpio = platform_get_drvdata(pdev); + struct tc35892 *tc35892 = tc35892_gpio->tc35892; + struct tc35892_gpio_platform_data *pdata = tc35892->pdata->gpio; int irq = platform_get_irq(pdev, 0); int ret; + if (pdata->remove) + pdata->remove(tc35892, tc35892_gpio->chip.base); + ret = gpiochip_remove(&tc35892_gpio->chip); if (ret < 0) { dev_err(tc35892_gpio->dev, diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c index 4174101660c9..837b8c1aa02a 100644 --- a/drivers/i2c/busses/i2c-pasemi.c +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -88,7 +88,7 @@ static void pasemi_smb_clear(struct pasemi_smbus *smbus) reg_write(smbus, REG_SMSTA, status); } -static unsigned int pasemi_smb_waitready(struct pasemi_smbus *smbus) +static int pasemi_smb_waitready(struct pasemi_smbus *smbus) { int timeout = 10; unsigned int status; diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 2a4cb9c18f01..404843e8611b 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -43,7 +43,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/cisreg.h> @@ -72,17 +71,6 @@ static int ide_config(struct pcmcia_device *); static void ide_detach(struct pcmcia_device *p_dev); - - - -/*====================================================================== - - ide_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int ide_probe(struct pcmcia_device *link) { ide_info_t *info; @@ -97,23 +85,12 @@ static int ide_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; return ide_config(link); } /* ide_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void ide_detach(struct pcmcia_device *link) { ide_info_t *info = link->priv; @@ -187,79 +164,31 @@ out_release: return NULL; } -/*====================================================================== - - ide_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ide device available to the system. - -======================================================================*/ - -struct pcmcia_config_check { - unsigned long ctl_base; - int skip_vcc; - int is_kme; -}; - -static int pcmcia_check_one_config(struct pcmcia_device *pdev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) { - struct pcmcia_config_check *stk = priv_data; - - /* Check for matching Vcc, unless we're desperate */ - if (!stk->skip_vcc) { - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } - } + int *is_kme = priv_data; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - - pdev->conf.ConfigIndex = cfg->index; - pdev->resource[0]->start = io->win[0].base; - if (!(io->flags & CISTPL_IO_16BIT)) { - pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - } - if (io->nwin == 2) { - pdev->resource[0]->end = 8; - pdev->resource[1]->start = io->win[1].base; - pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[1]->start; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->resource[0]->end = io->win[0].len; - pdev->resource[1]->end = 0; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[0]->start + 0x0e; - } else + if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + } + pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pdev->resource[1]->end) { + pdev->resource[0]->end = 8; + pdev->resource[1]->end = (*is_kme) ? 2 : 1; + } else { + if (pdev->resource[0]->end < 16) return -ENODEV; - /* If we've got this far, we're done */ - return 0; } - return -ENODEV; + + return pcmcia_request_io(pdev); } static int ide_config(struct pcmcia_device *link) { ide_info_t *info = link->priv; - struct pcmcia_config_check *stk = NULL; int ret = 0, is_kme = 0; unsigned long io_base, ctl_base; struct ide_host *host; @@ -270,23 +199,21 @@ static int ide_config(struct pcmcia_device *link) ((link->card_id == PRODID_KME_KXLC005_A) || (link->card_id == PRODID_KME_KXLC005_B))); - stk = kzalloc(sizeof(*stk), GFP_KERNEL); - if (!stk) - goto err_mem; - stk->is_kme = is_kme; - stk->skip_vcc = io_base = ctl_base = 0; - - if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) { - stk->skip_vcc = 1; - if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) + if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) { + link->config_flags &= ~CONF_AUTO_CHECK_VCC; + if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) goto failed; /* No suitable config found */ } io_base = link->resource[0]->start; - ctl_base = stk->ctl_base; + if (link->resource[1]->end) + ctl_base = link->resource[1]->start; + else + ctl_base = link->resource[0]->start + 0x0e; if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -311,29 +238,15 @@ static int ide_config(struct pcmcia_device *link) info->host = host; dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n", 'a' + host->ports[0]->index * 2, - link->conf.Vpp / 10, link->conf.Vpp % 10); + link->vpp / 10, link->vpp % 10); - kfree(stk); return 0; -err_mem: - printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n"); - goto failed; - failed: - kfree(stk); ide_release(link); return -ENODEV; } /* ide_config */ -/*====================================================================== - - After a card is removed, ide_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void ide_release(struct pcmcia_device *link) { ide_info_t *info = link->priv; @@ -359,15 +272,6 @@ static void ide_release(struct pcmcia_device *link) } /* ide_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. A CARD_REMOVAL event - also sets some flags to discourage the ide drivers from - talking to the ports. - -======================================================================*/ - static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_FUNC_ID(4), PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */ @@ -440,9 +344,7 @@ MODULE_DEVICE_TABLE(pcmcia, ide_ids); static struct pcmcia_driver ide_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ide-cs", - }, + .name = "ide-cs", .probe = ide_probe, .remove = ide_detach, .id_table = ide_ids, diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 9cc488d21490..aa037fec2f86 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -338,7 +338,7 @@ config KEYBOARD_OPENCORES config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" - depends on PXA27x || PXA3xx + depends on PXA27x || PXA3xx || ARCH_MMP help Enable support for PXA27x/PXA3xx keypad controller. diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index f32404f99189..4b0ec35259a1 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -32,7 +32,7 @@ #include <asm/mach/map.h> #include <mach/hardware.h> -#include <mach/pxa27x_keypad.h> +#include <plat/pxa27x_keypad.h> /* * Keypad Controller registers */ @@ -330,11 +330,21 @@ static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad) keypad->direct_key_state = new_state; } +static void clear_wakeup_event(struct pxa27x_keypad *keypad) +{ + struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + + if (pdata->clear_wakeup_event) + (pdata->clear_wakeup_event)(); +} + static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id) { struct pxa27x_keypad *keypad = dev_id; unsigned long kpc = keypad_readl(KPC); + clear_wakeup_event(keypad); + if (kpc & KPC_DI) pxa27x_keypad_scan_direct(keypad); diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 09b1795516f4..91f06a3ef002 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -20,7 +20,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -39,87 +38,32 @@ MODULE_LICENSE("GPL"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the skeleton event - handler. -*/ - static int avmcs_config(struct pcmcia_device *link); static void avmcs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void avmcs_detach(struct pcmcia_device *p_dev); -/*====================================================================== - - avmcs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int avmcs_probe(struct pcmcia_device *p_dev) { - - /* The io structure describes IO port mapping */ - p_dev->resource[0]->end = 16; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; - p_dev->conf.Present = PRESENT_OPTION; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + p_dev->config_index = 1; + p_dev->config_regs = PRESENT_OPTION; return avmcs_config(p_dev); } /* avmcs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ static void avmcs_detach(struct pcmcia_device *link) { avmcs_release(link); } /* avmcs_detach */ -/*====================================================================== - - avmcs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - -static int avmcs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int avmcs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - if (cf->io.nwin <= 0) - return -ENODEV; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[0]->end = cf->io.win[0].len; return pcmcia_request_io(p_dev); } @@ -150,7 +94,7 @@ static int avmcs_config(struct pcmcia_device *link) /* * configure the PCMCIA socket */ - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) { pcmcia_disable_device(link); break; @@ -197,13 +141,6 @@ static int avmcs_config(struct pcmcia_device *link) } /* avmcs_config */ -/*====================================================================== - - After a card is removed, avmcs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ static void avmcs_release(struct pcmcia_device *link) { @@ -222,9 +159,7 @@ MODULE_DEVICE_TABLE(pcmcia, avmcs_ids); static struct pcmcia_driver avmcs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "avm_cs", - }, + .name = "avm_cs", .probe = avmcs_probe, .remove = avmcs_detach, .id_table = avmcs_ids, diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 94263c22b874..ac4dd7857cbd 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -20,7 +20,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include "hisax_cfg.h" @@ -40,67 +39,22 @@ module_param(isdnprot, int, 0); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the skeleton event - handler. -*/ - static int avma1cs_config(struct pcmcia_device *link) __devinit ; static void avma1cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void avma1cs_detach(struct pcmcia_device *p_dev) __devexit ; - -/*====================================================================== - - avma1cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) { dev_dbg(&p_dev->dev, "avma1cs_attach()\n"); - /* The io structure describes IO port mapping */ - p_dev->resource[0]->end = 16; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[1]->end = 16; - p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; - /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; - p_dev->conf.Present = PRESENT_OPTION; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + p_dev->config_index = 1; + p_dev->config_regs = PRESENT_OPTION; return avma1cs_config(p_dev); } /* avma1cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit avma1cs_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link); @@ -108,26 +62,13 @@ static void __devexit avma1cs_detach(struct pcmcia_device *link) kfree(link->priv); } /* avma1cs_detach */ -/*====================================================================== - - avma1cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - -static int avma1cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int avma1cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - if (cf->io.nwin <= 0) - return -ENODEV; - - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[0]->end = cf->io.win[0].len; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->io_lines = 5; + return pcmcia_request_io(p_dev); } @@ -161,7 +102,7 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) /* * configure the PCMCIA socket */ - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) { pcmcia_disable_device(link); break; @@ -175,9 +116,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) return -ENODEV; } - printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n", - (unsigned int) link->resource[0]->start, link->irq); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = isdnprot; @@ -196,14 +134,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) return 0; } /* avma1cs_config */ -/*====================================================================== - - After a card is removed, avma1cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void avma1cs_release(struct pcmcia_device *link) { unsigned long minor = (unsigned long) link->priv; @@ -216,7 +146,6 @@ static void avma1cs_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* avma1cs_release */ - static struct pcmcia_device_id avma1cs_ids[] = { PCMCIA_DEVICE_PROD_ID12("AVM", "ISDN A", 0x95d42008, 0xadc9d4bb), PCMCIA_DEVICE_PROD_ID12("ISDN", "CARD", 0x8d9761c8, 0x01c5aa7b), @@ -226,19 +155,15 @@ MODULE_DEVICE_TABLE(pcmcia, avma1cs_ids); static struct pcmcia_driver avma1cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "avma1_cs", - }, + .name = "avma1_cs", .probe = avma1cs_probe, .remove = __devexit_p(avma1cs_detach), .id_table = avma1cs_ids, }; -/*====================================================================*/ - static int __init init_avma1_cs(void) { - return(pcmcia_register_driver(&avma1cs_driver)); + return pcmcia_register_driver(&avma1cs_driver); } static void __exit exit_avma1_cs(void) diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index b3c08aaf41c4..496d477af0f8 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -46,7 +46,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -64,26 +63,8 @@ MODULE_LICENSE("Dual MPL/GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the elsa_cs event - handler. -*/ - static int elsa_cs_config(struct pcmcia_device *link) __devinit ; static void elsa_cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit; typedef struct local_info_t { @@ -92,18 +73,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - elsa_cs_attach() creates an "instance" of the driver, allocatingx - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit elsa_cs_probe(struct pcmcia_device *link) { local_info_t *local; @@ -119,31 +88,9 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) local->cardnr = -1; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->resource[0]->end = 8; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - return elsa_cs_config(link); } /* elsa_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit elsa_cs_detach(struct pcmcia_device *link) { local_info_t *info = link->priv; @@ -156,27 +103,17 @@ static void __devexit elsa_cs_detach(struct pcmcia_device *link) kfree(info); } /* elsa_cs_detach */ -/*====================================================================== - - elsa_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - -static int elsa_cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int elsa_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { int j; p_dev->io_lines = 3; + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - if ((cf->io.nwin > 0) && cf->io.win[0].base) { + if ((p_dev->resource[0]->end) && p_dev->resource[0]->start) { printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n"); - p_dev->resource[0]->start = cf->io.win[0].base; if (!pcmcia_request_io(p_dev)) return 0; } else { @@ -199,6 +136,8 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) dev_dbg(&link->dev, "elsa_config(0x%p)\n", link); dev = link->priv; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL); if (i != 0) goto failed; @@ -206,21 +145,10 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) if (!link->irq) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = protocol; @@ -240,14 +168,6 @@ failed: return -ENODEV; } /* elsa_cs_config */ -/*====================================================================== - - After a card is removed, elsa_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void elsa_cs_release(struct pcmcia_device *link) { local_info_t *local = link->priv; @@ -291,9 +211,7 @@ MODULE_DEVICE_TABLE(pcmcia, elsa_ids); static struct pcmcia_driver elsa_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "elsa_cs", - }, + .name = "elsa_cs", .probe = elsa_cs_probe, .remove = __devexit_p(elsa_cs_detach), .id_table = elsa_ids, diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index a024192b672a..360204bc2777 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -46,7 +46,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -64,26 +63,9 @@ MODULE_LICENSE("Dual MPL/GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the sedlbauer - event handler. -*/ - static int sedlbauer_config(struct pcmcia_device *link) __devinit ; static void sedlbauer_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit; typedef struct local_info_t { @@ -92,18 +74,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - sedlbauer_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit sedlbauer_probe(struct pcmcia_device *link) { local_info_t *local; @@ -118,35 +88,9 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - - /* from old sedl_cs - */ - /* The io structure describes IO port mapping */ - link->resource[0]->end = 8; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return sedlbauer_config(link); } /* sedlbauer_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit sedlbauer_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link); @@ -158,70 +102,15 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link) kfree(link->priv); } /* sedlbauer_detach */ -/*====================================================================== - - sedlbauer_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ -static int sedlbauer_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - } - - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - p_dev->io_lines = 3; - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } - - return 0; + p_dev->io_lines = 3; + return pcmcia_request_io(p_dev); } - - static int __devinit sedlbauer_config(struct pcmcia_device *link) { int ret; @@ -229,44 +118,17 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link); - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL); if (ret) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x:", - link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = protocol; @@ -290,14 +152,6 @@ failed: } /* sedlbauer_config */ -/*====================================================================== - - After a card is removed, sedlbauer_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void sedlbauer_release(struct pcmcia_device *link) { local_info_t *local = link->priv; @@ -346,9 +200,7 @@ MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids); static struct pcmcia_driver sedlbauer_driver = { .owner = THIS_MODULE, - .drv = { - .name = "sedlbauer_cs", - }, + .name = "sedlbauer_cs", .probe = sedlbauer_probe, .remove = __devexit_p(sedlbauer_detach), .id_table = sedlbauer_ids, diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 7296102ca255..282a4467ef19 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -27,7 +27,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -45,26 +44,8 @@ MODULE_LICENSE("GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the teles_cs event - handler. -*/ - static int teles_cs_config(struct pcmcia_device *link) __devinit ; static void teles_cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void teles_detach(struct pcmcia_device *p_dev) __devexit ; typedef struct local_info_t { @@ -73,18 +54,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - teles_attach() creates an "instance" of the driver, allocatingx - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit teles_probe(struct pcmcia_device *link) { local_info_t *local; @@ -99,31 +68,11 @@ static int __devinit teles_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->resource[0]->end = 96; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return teles_cs_config(link); } /* teles_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit teles_detach(struct pcmcia_device *link) { local_info_t *info = link->priv; @@ -136,27 +85,17 @@ static void __devexit teles_detach(struct pcmcia_device *link) kfree(info); } /* teles_detach */ -/*====================================================================== - - teles_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - -static int teles_cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int teles_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { int j; p_dev->io_lines = 5; + p_dev->resource[0]->end = 96; + p_dev->resource[0]->flags &= IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - if ((cf->io.nwin > 0) && cf->io.win[0].base) { + if ((p_dev->resource[0]->end) && p_dev->resource[0]->start) { printk(KERN_INFO "(teles_cs: looks like the 96 model)\n"); - p_dev->resource[0]->start = cf->io.win[0].base; if (!pcmcia_request_io(p_dev)) return 0; } else { @@ -186,21 +125,10 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) if (!link->irq) goto cs_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto cs_failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x:", - link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = protocol; @@ -222,14 +150,6 @@ cs_failed: return -ENODEV; } /* teles_cs_config */ -/*====================================================================== - - After a card is removed, teles_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void teles_cs_release(struct pcmcia_device *link) { local_info_t *local = link->priv; @@ -273,9 +193,7 @@ MODULE_DEVICE_TABLE(pcmcia, teles_ids); static struct pcmcia_driver teles_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "teles_cs", - }, + .name = "teles_cs", .probe = teles_probe, .remove = __devexit_p(teles_detach), .id_table = teles_ids, diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index e4112622e5a2..cc2a88d5192f 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -304,13 +304,22 @@ config LEDS_MC13783 config LEDS_NS2 tristate "LED support for Network Space v2 GPIO LEDs" - depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 + depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2 default y help This option enable support for the dual-GPIO LED found on the Network Space v2 board (and parents). This include Internet Space v2, Network Space (Max) v2 and d2 Network v2 boards. +config LEDS_NETXBIG + tristate "LED support for Big Network series LEDs" + depends on MACH_NET2BIG_V2 || MACH_NET5BIG_V2 + default y + help + This option enable support for LEDs found on the LaCie 2Big + and 5Big Network v2 boards. The LEDs are wired to a CPLD and are + controlled through a GPIO extension bus. + config LEDS_TRIGGERS bool "LED Trigger support" help diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 7d6b95831f8e..9c96db40ef6d 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o obj-$(CONFIG_LEDS_NS2) += leds-ns2.o +obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c new file mode 100644 index 000000000000..f2e51c134399 --- /dev/null +++ b/drivers/leds/leds-netxbig.c @@ -0,0 +1,449 @@ +/* + * leds-netxbig.c - Driver for the 2Big and 5Big Network series LEDs + * + * Copyright (C) 2010 LaCie + * + * Author: Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <mach/leds-netxbig.h> + +/* + * GPIO extension bus. + */ + +static DEFINE_SPINLOCK(gpio_ext_lock); + +static void gpio_ext_set_addr(struct netxbig_gpio_ext *gpio_ext, int addr) +{ + int pin; + + for (pin = 0; pin < gpio_ext->num_addr; pin++) + gpio_set_value(gpio_ext->addr[pin], (addr >> pin) & 1); +} + +static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data) +{ + int pin; + + for (pin = 0; pin < gpio_ext->num_data; pin++) + gpio_set_value(gpio_ext->data[pin], (data >> pin) & 1); +} + +static void gpio_ext_enable_select(struct netxbig_gpio_ext *gpio_ext) +{ + /* Enable select is done on the raising edge. */ + gpio_set_value(gpio_ext->enable, 0); + gpio_set_value(gpio_ext->enable, 1); +} + +static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext, + int addr, int value) +{ + unsigned long flags; + + spin_lock_irqsave(&gpio_ext_lock, flags); + gpio_ext_set_addr(gpio_ext, addr); + gpio_ext_set_data(gpio_ext, value); + gpio_ext_enable_select(gpio_ext); + spin_unlock_irqrestore(&gpio_ext_lock, flags); +} + +static int __devinit gpio_ext_init(struct netxbig_gpio_ext *gpio_ext) +{ + int err; + int i; + + if (unlikely(!gpio_ext)) + return -EINVAL; + + /* Configure address GPIOs. */ + for (i = 0; i < gpio_ext->num_addr; i++) { + err = gpio_request(gpio_ext->addr[i], "GPIO extension addr"); + if (err) + goto err_free_addr; + err = gpio_direction_output(gpio_ext->addr[i], 0); + if (err) { + gpio_free(gpio_ext->addr[i]); + goto err_free_addr; + } + } + /* Configure data GPIOs. */ + for (i = 0; i < gpio_ext->num_data; i++) { + err = gpio_request(gpio_ext->data[i], "GPIO extension data"); + if (err) + goto err_free_data; + err = gpio_direction_output(gpio_ext->data[i], 0); + if (err) { + gpio_free(gpio_ext->data[i]); + goto err_free_data; + } + } + /* Configure "enable select" GPIO. */ + err = gpio_request(gpio_ext->enable, "GPIO extension enable"); + if (err) + goto err_free_data; + err = gpio_direction_output(gpio_ext->enable, 0); + if (err) { + gpio_free(gpio_ext->enable); + goto err_free_data; + } + + return 0; + +err_free_data: + for (i = i - 1; i >= 0; i--) + gpio_free(gpio_ext->data[i]); + i = gpio_ext->num_addr; +err_free_addr: + for (i = i - 1; i >= 0; i--) + gpio_free(gpio_ext->addr[i]); + + return err; +} + +static void __devexit gpio_ext_free(struct netxbig_gpio_ext *gpio_ext) +{ + int i; + + gpio_free(gpio_ext->enable); + for (i = gpio_ext->num_addr - 1; i >= 0; i--) + gpio_free(gpio_ext->addr[i]); + for (i = gpio_ext->num_data - 1; i >= 0; i--) + gpio_free(gpio_ext->data[i]); +} + +/* + * Class LED driver. + */ + +struct netxbig_led_data { + struct netxbig_gpio_ext *gpio_ext; + struct led_classdev cdev; + int mode_addr; + int *mode_val; + int bright_addr; + int bright_max; + struct netxbig_led_timer *timer; + int num_timer; + enum netxbig_led_mode mode; + int sata; + spinlock_t lock; +}; + +static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode, + unsigned long delay_on, + unsigned long delay_off, + struct netxbig_led_timer *timer, + int num_timer) +{ + int i; + + for (i = 0; i < num_timer; i++) { + if (timer[i].delay_on == delay_on && + timer[i].delay_off == delay_off) { + *mode = timer[i].mode; + return 0; + } + } + return -EINVAL; +} + +static int netxbig_led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct netxbig_led_data *led_dat = + container_of(led_cdev, struct netxbig_led_data, cdev); + enum netxbig_led_mode mode; + int mode_val; + int ret; + + /* Look for a LED mode with the requested timer frequency. */ + ret = netxbig_led_get_timer_mode(&mode, *delay_on, *delay_off, + led_dat->timer, led_dat->num_timer); + if (ret < 0) + return ret; + + mode_val = led_dat->mode_val[mode]; + if (mode_val == NETXBIG_LED_INVALID_MODE) + return -EINVAL; + + spin_lock_irq(&led_dat->lock); + + gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); + led_dat->mode = mode; + + spin_unlock_irq(&led_dat->lock); + + return 0; +} + +static void netxbig_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct netxbig_led_data *led_dat = + container_of(led_cdev, struct netxbig_led_data, cdev); + enum netxbig_led_mode mode; + int mode_val, bright_val; + int set_brightness = 1; + unsigned long flags; + + spin_lock_irqsave(&led_dat->lock, flags); + + if (value == LED_OFF) { + mode = NETXBIG_LED_OFF; + set_brightness = 0; + } else { + if (led_dat->sata) + mode = NETXBIG_LED_SATA; + else if (led_dat->mode == NETXBIG_LED_OFF) + mode = NETXBIG_LED_ON; + else /* Keep 'timer' mode. */ + mode = led_dat->mode; + } + mode_val = led_dat->mode_val[mode]; + + gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); + led_dat->mode = mode; + /* + * Note that the brightness register is shared between all the + * SATA LEDs. So, change the brightness setting for a single + * SATA LED will affect all the others. + */ + if (set_brightness) { + bright_val = DIV_ROUND_UP(value * led_dat->bright_max, + LED_FULL); + gpio_ext_set_value(led_dat->gpio_ext, + led_dat->bright_addr, bright_val); + } + + spin_unlock_irqrestore(&led_dat->lock, flags); +} + +static ssize_t netxbig_led_sata_store(struct device *dev, + struct device_attribute *attr, + const char *buff, size_t count) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct netxbig_led_data *led_dat = + container_of(led_cdev, struct netxbig_led_data, cdev); + unsigned long enable; + enum netxbig_led_mode mode; + int mode_val; + int ret; + + ret = strict_strtoul(buff, 10, &enable); + if (ret < 0) + return ret; + + enable = !!enable; + + spin_lock_irq(&led_dat->lock); + + if (led_dat->sata == enable) { + ret = count; + goto exit_unlock; + } + + if (led_dat->mode != NETXBIG_LED_ON && + led_dat->mode != NETXBIG_LED_SATA) + mode = led_dat->mode; /* Keep modes 'off' and 'timer'. */ + else if (enable) + mode = NETXBIG_LED_SATA; + else + mode = NETXBIG_LED_ON; + + mode_val = led_dat->mode_val[mode]; + if (mode_val == NETXBIG_LED_INVALID_MODE) { + ret = -EINVAL; + goto exit_unlock; + } + + gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); + led_dat->mode = mode; + led_dat->sata = enable; + + ret = count; + +exit_unlock: + spin_unlock_irq(&led_dat->lock); + + return ret; +} + +static ssize_t netxbig_led_sata_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct netxbig_led_data *led_dat = + container_of(led_cdev, struct netxbig_led_data, cdev); + + return sprintf(buf, "%d\n", led_dat->sata); +} + +static DEVICE_ATTR(sata, 0644, netxbig_led_sata_show, netxbig_led_sata_store); + +static void __devexit delete_netxbig_led(struct netxbig_led_data *led_dat) +{ + if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE) + device_remove_file(led_dat->cdev.dev, &dev_attr_sata); + led_classdev_unregister(&led_dat->cdev); +} + +static int __devinit +create_netxbig_led(struct platform_device *pdev, + struct netxbig_led_data *led_dat, + const struct netxbig_led *template) +{ + struct netxbig_led_platform_data *pdata = pdev->dev.platform_data; + int ret; + + spin_lock_init(&led_dat->lock); + led_dat->gpio_ext = pdata->gpio_ext; + led_dat->cdev.name = template->name; + led_dat->cdev.default_trigger = template->default_trigger; + led_dat->cdev.blink_set = netxbig_led_blink_set; + led_dat->cdev.brightness_set = netxbig_led_set; + /* + * Because the GPIO extension bus don't allow to read registers + * value, there is no way to probe the LED initial state. + * So, the initial sysfs LED value for the "brightness" and "sata" + * attributes are inconsistent. + * + * Note that the initial LED state can't be reconfigured. + * The reason is that the LED behaviour must stay uniform during + * the whole boot process (bootloader+linux). + */ + led_dat->sata = 0; + led_dat->cdev.brightness = LED_OFF; + led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + led_dat->mode_addr = template->mode_addr; + led_dat->mode_val = template->mode_val; + led_dat->bright_addr = template->bright_addr; + led_dat->bright_max = (1 << pdata->gpio_ext->num_data) - 1; + led_dat->timer = pdata->timer; + led_dat->num_timer = pdata->num_timer; + + ret = led_classdev_register(&pdev->dev, &led_dat->cdev); + if (ret < 0) + return ret; + + /* + * If available, expose the SATA activity blink capability through + * a "sata" sysfs attribute. + */ + if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE) { + ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata); + if (ret) + led_classdev_unregister(&led_dat->cdev); + } + + return ret; +} + +static int __devinit netxbig_led_probe(struct platform_device *pdev) +{ + struct netxbig_led_platform_data *pdata = pdev->dev.platform_data; + struct netxbig_led_data *leds_data; + int i; + int ret; + + if (!pdata) + return -EINVAL; + + leds_data = kzalloc(sizeof(struct netxbig_led_data) * pdata->num_leds, + GFP_KERNEL); + if (!leds_data) + return -ENOMEM; + + ret = gpio_ext_init(pdata->gpio_ext); + if (ret < 0) + goto err_free_data; + + for (i = 0; i < pdata->num_leds; i++) { + ret = create_netxbig_led(pdev, &leds_data[i], &pdata->leds[i]); + if (ret < 0) + goto err_free_leds; + } + + platform_set_drvdata(pdev, leds_data); + + return 0; + +err_free_leds: + for (i = i - 1; i >= 0; i--) + delete_netxbig_led(&leds_data[i]); + + gpio_ext_free(pdata->gpio_ext); +err_free_data: + kfree(leds_data); + + return ret; +} + +static int __devexit netxbig_led_remove(struct platform_device *pdev) +{ + struct netxbig_led_platform_data *pdata = pdev->dev.platform_data; + struct netxbig_led_data *leds_data; + int i; + + leds_data = platform_get_drvdata(pdev); + + for (i = 0; i < pdata->num_leds; i++) + delete_netxbig_led(&leds_data[i]); + + gpio_ext_free(pdata->gpio_ext); + kfree(leds_data); + + return 0; +} + +static struct platform_driver netxbig_led_driver = { + .probe = netxbig_led_probe, + .remove = __devexit_p(netxbig_led_remove), + .driver = { + .name = "leds-netxbig", + .owner = THIS_MODULE, + }, +}; +MODULE_ALIAS("platform:leds-netxbig"); + +static int __init netxbig_led_init(void) +{ + return platform_driver_register(&netxbig_led_driver); +} + +static void __exit netxbig_led_exit(void) +{ + platform_driver_unregister(&netxbig_led_driver); +} + +module_init(netxbig_led_init); +module_exit(netxbig_led_exit); + +MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>"); +MODULE_DESCRIPTION("LED driver for LaCie xBig Network boards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c index 350eb34f049c..f77d48d0b3e4 100644 --- a/drivers/leds/leds-ns2.c +++ b/drivers/leds/leds-ns2.c @@ -141,10 +141,12 @@ static ssize_t ns2_led_sata_store(struct device *dev, struct device_attribute *attr, const char *buff, size_t count) { + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct ns2_led_data *led_dat = + container_of(led_cdev, struct ns2_led_data, cdev); int ret; unsigned long enable; enum ns2_led_modes mode; - struct ns2_led_data *led_dat = dev_get_drvdata(dev); ret = strict_strtoul(buff, 10, &enable); if (ret < 0) @@ -172,7 +174,9 @@ static ssize_t ns2_led_sata_store(struct device *dev, static ssize_t ns2_led_sata_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct ns2_led_data *led_dat = dev_get_drvdata(dev); + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct ns2_led_data *led_dat = + container_of(led_cdev, struct ns2_led_data, cdev); return sprintf(buf, "%d\n", led_dat->sata); } @@ -234,7 +238,6 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat, if (ret < 0) goto err_free_slow; - dev_set_drvdata(led_dat->cdev.dev, led_dat); ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata); if (ret < 0) goto err_free_cdev; diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c index d242976bcfe7..19c371809d77 100644 --- a/drivers/macintosh/via-pmu-led.c +++ b/drivers/macintosh/via-pmu-led.c @@ -92,8 +92,10 @@ static int __init via_pmu_led_init(void) if (dt == NULL) return -ENODEV; model = of_get_property(dt, "model", NULL); - if (model == NULL) + if (model == NULL) { + of_node_put(dt); return -ENODEV; + } if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 && strncmp(model, "iBook", strlen("iBook")) != 0 && strcmp(model, "PowerMac7,2") != 0 && diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c index e1c8b62b086d..01b6d584442c 100644 --- a/drivers/mfd/ab8500-spi.c +++ b/drivers/mfd/ab8500-spi.c @@ -83,6 +83,11 @@ static int __devinit ab8500_spi_probe(struct spi_device *spi) struct ab8500 *ab8500; int ret; + spi->bits_per_word = 24; + ret = spi_setup(spi); + if (ret < 0) + return ret; + ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL); if (!ab8500) return -ENOMEM; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 840b301b5671..f2e02d7d9f3d 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -41,23 +41,35 @@ static unsigned int fmax = 515633; * @clkreg: default value for MCICLOCK register * @clkreg_enable: enable value for MMCICLOCK register * @datalength_bits: number of bits in the MMCIDATALENGTH register + * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY + * is asserted (likewise for RX) + * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY + * is asserted (likewise for RX) */ struct variant_data { unsigned int clkreg; unsigned int clkreg_enable; unsigned int datalength_bits; + unsigned int fifosize; + unsigned int fifohalfsize; }; static struct variant_data variant_arm = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, .datalength_bits = 16, }; static struct variant_data variant_u300 = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, .clkreg_enable = 1 << 13, /* HWFCEN */ .datalength_bits = 16, }; static struct variant_data variant_ux500 = { + .fifosize = 30 * 4, + .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, .clkreg_enable = 1 << 14, /* HWFCEN */ .datalength_bits = 24, @@ -138,6 +150,7 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) { + struct variant_data *variant = host->variant; unsigned int datactrl, timeout, irqmask; unsigned long long clks; void __iomem *base; @@ -173,7 +186,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) * If we have less than a FIFOSIZE of bytes to transfer, * trigger a PIO interrupt as soon as any data is available. */ - if (host->size < MCI_FIFOSIZE) + if (host->size < variant->fifosize) irqmask |= MCI_RXDATAAVLBLMASK; } else { /* @@ -332,13 +345,15 @@ static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int rema static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status) { + struct variant_data *variant = host->variant; void __iomem *base = host->base; char *ptr = buffer; do { unsigned int count, maxcnt; - maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : MCI_FIFOHALFSIZE; + maxcnt = status & MCI_TXFIFOEMPTY ? + variant->fifosize : variant->fifohalfsize; count = min(remain, maxcnt); writesl(base + MMCIFIFO, ptr, count >> 2); @@ -362,6 +377,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) { struct mmci_host *host = dev_id; struct sg_mapping_iter *sg_miter = &host->sg_miter; + struct variant_data *variant = host->variant; void __iomem *base = host->base; unsigned long flags; u32 status; @@ -420,7 +436,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) * If we're nearing the end of the read, switch to * "any data available" mode. */ - if (status & MCI_RXACTIVE && host->size < MCI_FIFOSIZE) + if (status & MCI_RXACTIVE && host->size < variant->fifosize) writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1); /* @@ -564,18 +580,23 @@ static int mmci_get_ro(struct mmc_host *mmc) if (host->gpio_wp == -ENOSYS) return -ENOSYS; - return gpio_get_value(host->gpio_wp); + return gpio_get_value_cansleep(host->gpio_wp); } static int mmci_get_cd(struct mmc_host *mmc) { struct mmci_host *host = mmc_priv(mmc); + struct mmci_platform_data *plat = host->plat; unsigned int status; - if (host->gpio_cd == -ENOSYS) - status = host->plat->status(mmc_dev(host->mmc)); - else - status = !gpio_get_value(host->gpio_cd); + if (host->gpio_cd == -ENOSYS) { + if (!plat->status) + return 1; /* Assume always present */ + + status = plat->status(mmc_dev(host->mmc)); + } else + status = !!gpio_get_value_cansleep(host->gpio_cd) + ^ plat->cd_invert; /* * Use positive logic throughout - status is zero for no card, @@ -584,6 +605,15 @@ static int mmci_get_cd(struct mmc_host *mmc) return status; } +static irqreturn_t mmci_cd_irq(int irq, void *dev_id) +{ + struct mmci_host *host = dev_id; + + mmc_detect_change(host->mmc, msecs_to_jiffies(500)); + + return IRQ_HANDLED; +} + static const struct mmc_host_ops mmci_ops = { .request = mmci_request, .set_ios = mmci_set_ios, @@ -620,6 +650,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) host->gpio_wp = -ENOSYS; host->gpio_cd = -ENOSYS; + host->gpio_cd_irq = -1; host->hw_designer = amba_manf(dev); host->hw_revision = amba_rev(dev); @@ -699,7 +730,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) if (host->vcc == NULL) mmc->ocr_avail = plat->ocr_mask; mmc->caps = plat->capabilities; - mmc->caps |= MMC_CAP_NEEDS_POLL; /* * We can do SGIO @@ -744,6 +774,12 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) host->gpio_cd = plat->gpio_cd; else if (ret != -ENOSYS) goto err_gpio_cd; + + ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd), + mmci_cd_irq, 0, + DRIVER_NAME " (cd)", host); + if (ret >= 0) + host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd); } if (gpio_is_valid(plat->gpio_wp)) { ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)"); @@ -755,6 +791,10 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) goto err_gpio_wp; } + if ((host->plat->status || host->gpio_cd != -ENOSYS) + && host->gpio_cd_irq < 0) + mmc->caps |= MMC_CAP_NEEDS_POLL; + ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host); if (ret) goto unmap; @@ -781,6 +821,8 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) if (host->gpio_wp != -ENOSYS) gpio_free(host->gpio_wp); err_gpio_wp: + if (host->gpio_cd_irq >= 0) + free_irq(host->gpio_cd_irq, host); if (host->gpio_cd != -ENOSYS) gpio_free(host->gpio_cd); err_gpio_cd: @@ -819,6 +861,8 @@ static int __devexit mmci_remove(struct amba_device *dev) if (host->gpio_wp != -ENOSYS) gpio_free(host->gpio_wp); + if (host->gpio_cd_irq >= 0) + free_irq(host->gpio_cd_irq, host); if (host->gpio_cd != -ENOSYS) gpio_free(host->gpio_cd); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 68970cfb81e1..4ae887fc0189 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -54,10 +54,16 @@ #define MCI_DPSM_MODE (1 << 2) #define MCI_DPSM_DMAENABLE (1 << 3) #define MCI_DPSM_BLOCKSIZE (1 << 4) -#define MCI_DPSM_RWSTART (1 << 8) -#define MCI_DPSM_RWSTOP (1 << 9) -#define MCI_DPSM_RWMOD (1 << 10) -#define MCI_DPSM_SDIOEN (1 << 11) +/* Control register extensions in the ST Micro U300 and Ux500 versions */ +#define MCI_ST_DPSM_RWSTART (1 << 8) +#define MCI_ST_DPSM_RWSTOP (1 << 9) +#define MCI_ST_DPSM_RWMOD (1 << 10) +#define MCI_ST_DPSM_SDIOEN (1 << 11) +/* Control register extensions in the ST Micro Ux500 versions */ +#define MCI_ST_DPSM_DMAREQCTL (1 << 12) +#define MCI_ST_DPSM_DBOOTMODEEN (1 << 13) +#define MCI_ST_DPSM_BUSYMODE (1 << 14) +#define MCI_ST_DPSM_DDRMODE (1 << 15) #define MMCIDATACNT 0x030 #define MMCISTATUS 0x034 @@ -133,13 +139,6 @@ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK) -/* - * The size of the FIFO in bytes. - */ -#define MCI_FIFOSIZE (16*4) - -#define MCI_FIFOHALFSIZE (MCI_FIFOSIZE / 2) - #define NR_SG 16 struct clk; @@ -154,6 +153,7 @@ struct mmci_host { struct clk *clk; int gpio_cd; int gpio_wp; + int gpio_cd_irq; unsigned int data_xfered; diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c index 7aa65bb2af4a..f472c2714eb8 100644 --- a/drivers/mmc/host/sdricoh_cs.c +++ b/drivers/mmc/host/sdricoh_cs.c @@ -30,7 +30,6 @@ #include <linux/ioport.h> #include <linux/scatterlist.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <linux/io.h> @@ -536,9 +535,7 @@ static int sdricoh_pcmcia_resume(struct pcmcia_device *link) #endif static struct pcmcia_driver sdricoh_driver = { - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = sdricoh_pcmcia_probe, .remove = sdricoh_pcmcia_detach, .id_table = pcmcia_ids, diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index e9ca5ba7d9d2..57a1acfe22c4 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -16,7 +16,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -101,7 +100,7 @@ MODULE_PARM_DESC(mem_type, "Set Memory type (0=Flash, 1=RAM, 2=ROM, default=0)") static caddr_t remap_window(struct map_info *map, unsigned long to) { struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1; - window_handle_t win = (window_handle_t)map->map_priv_2; + struct resource *win = (struct resource *) map->map_priv_2; unsigned int offset; int ret; @@ -316,30 +315,19 @@ static void pcmciamtd_set_vpp(struct map_info *map, int on) { struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1; struct pcmcia_device *link = dev->p_dev; - modconf_t mod; - int ret; - - mod.Attributes = CONF_VPP1_CHANGE_VALID | CONF_VPP2_CHANGE_VALID; - mod.Vcc = 0; - mod.Vpp1 = mod.Vpp2 = on ? dev->vpp : 0; DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp); - ret = pcmcia_modify_configuration(link, &mod); + pcmcia_fixup_vpp(link, on ? dev->vpp : 0); } -/* After a card is removed, pcmciamtd_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ - static void pcmciamtd_release(struct pcmcia_device *link) { struct pcmciamtd_dev *dev = link->priv; DEBUG(3, "link = 0x%p", link); - if (link->win) { + if (link->resource[2]->end) { if(dev->win_base) { iounmap(dev->win_base); dev->win_base = NULL; @@ -482,18 +470,12 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev } -/* pcmciamtd_config() is scheduled to run after a CARD_INSERTION event - * is received, to configure the PCMCIA socket, and to make the - * MTD device available to the system. - */ - static int pcmciamtd_config(struct pcmcia_device *link) { struct pcmciamtd_dev *dev = link->priv; struct mtd_info *mtd = NULL; - win_req_t req; int ret; - int i; + int i, j = 0; static char *probes[] = { "jedec_probe", "cfi_probe" }; int new_name = 0; @@ -520,28 +502,34 @@ static int pcmciamtd_config(struct pcmcia_device *link) * smaller windows until we succeed */ - req.Attributes = WIN_MEMORY_TYPE_CM | WIN_ENABLE; - req.Attributes |= (dev->pcmcia_map.bankwidth == 1) ? WIN_DATA_WIDTH_8 : WIN_DATA_WIDTH_16; - req.Base = 0; - req.AccessSpeed = mem_speed; - link->win = (window_handle_t)link; - req.Size = (force_size) ? force_size << 20 : MAX_PCMCIA_ADDR; + link->resource[2]->flags |= WIN_MEMORY_TYPE_CM | WIN_ENABLE; + link->resource[2]->flags |= (dev->pcmcia_map.bankwidth == 1) ? + WIN_DATA_WIDTH_8 : WIN_DATA_WIDTH_16; + link->resource[2]->start = 0; + link->resource[2]->end = (force_size) ? force_size << 20 : + MAX_PCMCIA_ADDR; dev->win_size = 0; do { int ret; - DEBUG(2, "requesting window with size = %dKiB memspeed = %d", - req.Size >> 10, req.AccessSpeed); - ret = pcmcia_request_window(link, &req, &link->win); + DEBUG(2, "requesting window with size = %luKiB memspeed = %d", + (unsigned long) resource_size(link->resource[2]) >> 10, + mem_speed); + ret = pcmcia_request_window(link, link->resource[2], mem_speed); DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size); if(ret) { - req.Size >>= 1; + j++; + link->resource[2]->start = 0; + link->resource[2]->end = (force_size) ? + force_size << 20 : MAX_PCMCIA_ADDR; + link->resource[2]->end >>= j; } else { - DEBUG(2, "Got window of size %dKiB", req.Size >> 10); - dev->win_size = req.Size; + DEBUG(2, "Got window of size %luKiB", (unsigned long) + resource_size(link->resource[2]) >> 10); + dev->win_size = resource_size(link->resource[2]); break; } - } while(req.Size >= 0x1000); + } while (link->resource[2]->end >= 0x1000); DEBUG(2, "dev->win_size = %d", dev->win_size); @@ -553,33 +541,31 @@ static int pcmciamtd_config(struct pcmcia_device *link) DEBUG(1, "Allocated a window of %dKiB", dev->win_size >> 10); /* Get write protect status */ - DEBUG(2, "window handle = 0x%8.8lx", (unsigned long)link->win); - dev->win_base = ioremap(req.Base, req.Size); + dev->win_base = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); if(!dev->win_base) { - dev_err(&dev->p_dev->dev, "ioremap(%lu, %u) failed\n", - req.Base, req.Size); + dev_err(&dev->p_dev->dev, "ioremap(%pR) failed\n", + link->resource[2]); pcmciamtd_release(link); return -ENODEV; } - DEBUG(1, "mapped window dev = %p req.base = 0x%lx base = %p size = 0x%x", - dev, req.Base, dev->win_base, req.Size); + DEBUG(1, "mapped window dev = %p @ %pR, base = %p", + dev, link->resource[2], dev->win_base); dev->offset = 0; dev->pcmcia_map.map_priv_1 = (unsigned long)dev; - dev->pcmcia_map.map_priv_2 = (unsigned long)link->win; + dev->pcmcia_map.map_priv_2 = (unsigned long)link->resource[2]; dev->vpp = (vpp) ? vpp : link->socket->socket.Vpp; - link->conf.Attributes = 0; if(setvpp == 2) { - link->conf.Vpp = dev->vpp; + link->vpp = dev->vpp; } else { - link->conf.Vpp = 0; + link->vpp = 0; } - link->conf.IntType = INT_MEMORY; - link->conf.ConfigIndex = 0; + link->config_index = 0; DEBUG(2, "Setting Configuration"); - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) { if (dev->win_base) { iounmap(dev->win_base); @@ -680,12 +666,6 @@ static int pcmciamtd_resume(struct pcmcia_device *dev) } -/* This deletes a driver "instance". The device is de-registered - * with Card Services. If it has been released, all local data - * structures are freed. Otherwise, the structures will be freed - * when the device is released. - */ - static void pcmciamtd_detach(struct pcmcia_device *link) { struct pcmciamtd_dev *dev = link->priv; @@ -703,11 +683,6 @@ static void pcmciamtd_detach(struct pcmcia_device *link) } -/* pcmciamtd_attach() creates an "instance" of the driver, allocating - * local data structures for one device. The device is registered - * with Card Services. - */ - static int pcmciamtd_probe(struct pcmcia_device *link) { struct pcmciamtd_dev *dev; @@ -720,9 +695,6 @@ static int pcmciamtd_probe(struct pcmcia_device *link) dev->p_dev = link; link->priv = dev; - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY; - return pcmciamtd_config(link); } @@ -757,9 +729,7 @@ static struct pcmcia_device_id pcmciamtd_ids[] = { MODULE_DEVICE_TABLE(pcmcia, pcmciamtd_ids); static struct pcmcia_driver pcmciamtd_driver = { - .drv = { - .name = "pcmciamtd" - }, + .name = "pcmciamtd", .probe = pcmciamtd_probe, .remove = pcmciamtd_detach, .owner = THIS_MODULE, @@ -771,8 +741,6 @@ static struct pcmcia_driver pcmciamtd_driver = { static int __init init_pcmciamtd(void) { - info(DRIVER_DESC); - if(bankwidth && bankwidth != 1 && bankwidth != 2) { info("bad bankwidth (%d), using default", bankwidth); bankwidth = 2; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 5db667c0b371..77efe462b921 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2,6 +2,9 @@ # Network device configuration # +config HAVE_NET_MACB + bool + menuconfig NETDEVICES default y if UML depends on NET @@ -221,7 +224,7 @@ config MII config MACB tristate "Atmel MACB support" - depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 + depends on HAVE_NET_MACB select PHYLIB help The Atmel MACB ethernet interface is found on many AT32 and AT91 diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 012613fde3f4..03d063554b7f 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -38,6 +38,7 @@ #include <asm/blackfin.h> #include <asm/cacheflush.h> #include <asm/portmux.h> +#include <mach/pll.h> #include "bfin_mac.h" diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index c683f77c6f42..ff824e11f0b6 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -87,7 +87,6 @@ earlier 3Com products. #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -280,25 +279,15 @@ static int tc574_probe(struct pcmcia_device *link) spin_lock_init(&lp->window_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); dev->watchdog_timeo = TX_TIMEOUT; return tc574_config(link); -} /* tc574_attach */ - -/* - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -*/ +} static void tc574_detach(struct pcmcia_device *link) { @@ -313,12 +302,6 @@ static void tc574_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc574_detach */ -/* - tc574_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -*/ - static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; static int tc574_config(struct pcmcia_device *link) @@ -352,7 +335,7 @@ static int tc574_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -465,12 +448,6 @@ failed: } /* tc574_config */ -/* - After a card is removed, tc574_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -*/ - static void tc574_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -1198,9 +1175,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc574_ids); static struct pcmcia_driver tc574_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c574_cs", - }, + .name = "3c574_cs", .probe = tc574_probe, .remove = tc574_detach, .id_table = tc574_ids, diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 61f9cf2100ff..a07e22295330 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -41,7 +41,6 @@ #include <linux/bitops.h> #include <linux/jiffies.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -176,14 +175,6 @@ static const struct ethtool_ops netdev_ethtool_ops; static void tc589_detach(struct pcmcia_device *p_dev); -/*====================================================================== - - tc589_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static const struct net_device_ops el3_netdev_ops = { .ndo_open = el3_open, .ndo_stop = el3_close, @@ -216,9 +207,8 @@ static int tc589_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -226,16 +216,7 @@ static int tc589_probe(struct pcmcia_device *link) SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); return tc589_config(link); -} /* tc589_attach */ - -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ +} static void tc589_detach(struct pcmcia_device *link) { @@ -250,14 +231,6 @@ static void tc589_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc589_detach */ -/*====================================================================== - - tc589_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int tc589_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -294,7 +267,7 @@ static int tc589_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -352,14 +325,6 @@ failed: return -ENODEV; } /* tc589_config */ -/*====================================================================== - - After a card is removed, tc589_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void tc589_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -955,9 +920,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc589_ids); static struct pcmcia_driver tc589_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c589_cs", - }, + .name = "3c589_cs", .probe = tc589_probe, .remove = tc589_detach, .id_table = tc589_ids, diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 5f05ffb240cc..9e8b28b271ae 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -39,7 +39,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -140,14 +139,6 @@ static const struct net_device_ops axnet_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - axnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int axnet_probe(struct pcmcia_device *link) { axnet_dev_t *info; @@ -166,8 +157,7 @@ static int axnet_probe(struct pcmcia_device *link) info = PRIV(dev); info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &axnet_netdev_ops; @@ -177,15 +167,6 @@ static int axnet_probe(struct pcmcia_device *link) return axnet_config(link); } /* axnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void axnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -231,7 +212,7 @@ static int get_prom(struct pcmcia_device *link) }; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return 0; axnet_reset_8390(dev); @@ -248,14 +229,6 @@ static int get_prom(struct pcmcia_device *link) return 1; } /* get_prom */ -/*====================================================================== - - axnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -286,35 +259,16 @@ static int try_io_port(struct pcmcia_device *link) } } -static int axnet_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int axnet_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - int i; - cistpl_io_t *io = &cfg->io; + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->index == 0 || cfg->io.nwin == 0) + p_dev->config_index = 0x05; + if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) return -ENODEV; - p_dev->conf.ConfigIndex = 0x05; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; - } - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); - - return -ENODEV; + return try_io_port(p_dev); } static int axnet_config(struct pcmcia_device *link) @@ -326,20 +280,19 @@ static int axnet_config(struct pcmcia_device *link) dev_dbg(&link->dev, "axnet_config(0x%p)\n", link); /* don't trust the CIS on this; Linksys got it wrong */ - link->conf.Present = 0x63; + link->config_regs = 0x63; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, axnet_configcheck, NULL); if (ret != 0) goto failed; if (!link->irq) goto failed; + + if (resource_size(link->resource[1]) == 8) + link->config_flags |= CONF_ENABLE_SPKR; - if (resource_size(link->resource[1]) == 8) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -414,14 +367,6 @@ failed: return -ENODEV; } /* axnet_config */ -/*====================================================================== - - After a card is removed, axnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void axnet_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -783,9 +728,7 @@ MODULE_DEVICE_TABLE(pcmcia, axnet_ids); static struct pcmcia_driver axnet_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "axnet_cs", - }, + .name = "axnet_cs", .probe = axnet_probe, .remove = axnet_detach, .id_table = axnet_ids, diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 3c400cfa82ae..b706a7249477 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -43,7 +43,6 @@ #include <linux/arcdevice.h> #include <linux/com20020.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -123,14 +122,6 @@ typedef struct com20020_dev_t { struct net_device *dev; } com20020_dev_t; -/*====================================================================== - - com20020_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int com20020_probe(struct pcmcia_device *p_dev) { com20020_dev_t *info; @@ -160,8 +151,7 @@ static int com20020_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->resource[0]->end = 16; - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; + p_dev->config_flags |= CONF_ENABLE_IRQ; info->dev = dev; p_dev->priv = info; @@ -174,15 +164,6 @@ fail_alloc_info: return -ENOMEM; } /* com20020_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void com20020_detach(struct pcmcia_device *link) { struct com20020_dev_t *info = link->priv; @@ -221,14 +202,6 @@ static void com20020_detach(struct pcmcia_device *link) } /* com20020_detach */ -/*====================================================================== - - com20020_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int com20020_config(struct pcmcia_device *link) { struct arcnet_local *lp; @@ -282,7 +255,7 @@ static int com20020_config(struct pcmcia_device *link) dev->irq = link->irq; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -316,14 +289,6 @@ failed: return -ENODEV; } /* com20020_config */ -/*====================================================================== - - After a card is removed, com20020_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void com20020_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "com20020_release\n"); @@ -366,9 +331,7 @@ MODULE_DEVICE_TABLE(pcmcia, com20020_ids); static struct pcmcia_driver com20020_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "com20020_cs", - }, + .name = "com20020_cs", .probe = com20020_probe, .remove = com20020_detach, .id_table = com20020_ids, diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 98fffb03ecd7..1c327598bbe8 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -49,7 +49,6 @@ #include <linux/ioport.h> #include <linux/crc32.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -252,8 +251,7 @@ static int fmvj18x_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &fjn_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -313,7 +311,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) ret = pcmcia_request_io(link); if (ret == 0) { /* calculate ConfigIndex value */ - link->conf.ConfigIndex = + link->config_index = ((link->resource[0]->start & 0x0f0) >> 3) | 0x22; return ret; } @@ -321,11 +319,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) return ret; /* RequestIO failed */ } -static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { return 0; /* strange, but that's what the code did already before... */ } @@ -362,28 +356,28 @@ static int fmvj18x_config(struct pcmcia_device *link) link->card_id == PRODID_TDK_NP9610 || link->card_id == PRODID_TDK_MN3200) { /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; } break; case MANFID_NEC: cardtype = NEC; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_KME: cardtype = KME; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_CONTEC: cardtype = CONTEC; break; case MANFID_FUJITSU: - if (link->conf.ConfigBase == 0x0fe0) + if (link->config_base == 0x0fe0) cardtype = MBH10302; else if (link->card_id == PRODID_FUJITSU_MBH10302) /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302), @@ -403,10 +397,10 @@ static int fmvj18x_config(struct pcmcia_device *link) case MANFID_FUJITSU: if (link->card_id == PRODID_FUJITSU_MBH10304) { cardtype = XXX10304; /* MBH10304 with buggy CIS */ - link->conf.ConfigIndex = 0x20; + link->config_index = 0x20; } else { cardtype = MBH10302; /* NextCom NC5310, etc. */ - link->conf.ConfigIndex = 1; + link->config_index = 1; } break; case MANFID_UNGERMANN: @@ -414,7 +408,7 @@ static int fmvj18x_config(struct pcmcia_device *link) break; default: cardtype = MBH10302; - link->conf.ConfigIndex = 1; + link->config_index = 1; } } @@ -432,7 +426,7 @@ static int fmvj18x_config(struct pcmcia_device *link) ret = pcmcia_request_irq(link, fjn_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -544,20 +538,18 @@ failed: static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) { - win_req_t req; u_char __iomem *base; int i, j; /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = 0; link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return -1; - base = ioremap(req.Base, req.Size); - pcmcia_map_mem_page(link, link->win, 0); + base = ioremap(link->resource[2]->start, resource_size(link->resource[2])); + pcmcia_map_mem_page(link, link->resource[2], 0); /* * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format @@ -582,7 +574,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) } iounmap(base); - j = pcmcia_release_window(link, link->win); + j = pcmcia_release_window(link, link->resource[2]); return (i != 0x200) ? 0 : -1; } /* fmvj18x_get_hwinfo */ @@ -590,27 +582,26 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) static int fmvj18x_setup_mfc(struct pcmcia_device *link) { - win_req_t req; int i; struct net_device *dev = link->priv; unsigned int ioaddr; local_info_t *lp = netdev_priv(dev); /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[3]->start = link->resource[3]->end = 0; + i = pcmcia_request_window(link, link->resource[3], 0); if (i != 0) return -1; - lp->base = ioremap(req.Base, req.Size); + lp->base = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); if (lp->base == NULL) { printk(KERN_NOTICE "fmvj18x_cs: ioremap failed\n"); return -1; } - i = pcmcia_map_mem_page(link, link->win, 0); + i = pcmcia_map_mem_page(link, link->resource[3], 0); if (i != 0) { iounmap(lp->base); lp->base = NULL; @@ -638,7 +629,6 @@ static void fmvj18x_release(struct pcmcia_device *link) struct net_device *dev = link->priv; local_info_t *lp = netdev_priv(dev); u_char __iomem *tmp; - int j; dev_dbg(&link->dev, "fmvj18x_release\n"); @@ -646,7 +636,6 @@ static void fmvj18x_release(struct pcmcia_device *link) tmp = lp->base; lp->base = NULL; /* set NULL before iounmap */ iounmap(tmp); - j = pcmcia_release_window(link, link->win); } pcmcia_disable_device(link); @@ -708,9 +697,7 @@ MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids); static struct pcmcia_driver fmvj18x_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "fmvj18x_cs", - }, + .name = "fmvj18x_cs", .probe = fmvj18x_probe, .remove = fmvj18x_detach, .id_table = fmvj18x_ids, diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index b0d06a3d962f..bf7dff96d881 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -57,7 +57,6 @@ #include <linux/trdevice.h> #include <linux/ibmtr.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -102,9 +101,8 @@ static void ibmtr_detach(struct pcmcia_device *p_dev); typedef struct ibmtr_dev_t { struct pcmcia_device *p_dev; - struct net_device *dev; - window_handle_t sram_win_handle; - struct tok_info *ti; + struct net_device *dev; + struct tok_info *ti; } ibmtr_dev_t; static void netdev_get_drvinfo(struct net_device *dev, @@ -123,14 +121,6 @@ static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) { return tok_interrupt(irq, dev); }; -/*====================================================================== - - ibmtr_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int __devinit ibmtr_attach(struct pcmcia_device *link) { ibmtr_dev_t *info; @@ -153,9 +143,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 4; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_regs = PRESENT_OPTION; info->dev = dev; @@ -164,15 +153,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) return ibmtr_config(link); } /* ibmtr_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void ibmtr_detach(struct pcmcia_device *link) { struct ibmtr_dev_t *info = link->priv; @@ -197,26 +177,17 @@ static void ibmtr_detach(struct pcmcia_device *link) kfree(info); } /* ibmtr_detach */ -/*====================================================================== - - ibmtr_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - token-ring device available to the system. - -======================================================================*/ - static int __devinit ibmtr_config(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; struct net_device *dev = info->dev; struct tok_info *ti = netdev_priv(dev); - win_req_t req; int i, ret; dev_dbg(&link->dev, "ibmtr_config\n"); - link->conf.ConfigIndex = 0x61; link->io_lines = 16; + link->config_index = 0x61; /* Determine if this is PRIMARY or ALTERNATE. */ @@ -240,39 +211,39 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq); /* Allocate the MMIO memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x2000; - req.AccessSpeed = 250; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[2]->flags |= WIN_USE_WAIT; + link->resource[2]->start = 0; + link->resource[2]->end = 0x2000; + ret = pcmcia_request_window(link, link->resource[2], 250); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, link->win, mmiobase); + ret = pcmcia_map_mem_page(link, link->resource[2], mmiobase); if (ret) goto failed; - ti->mmio = ioremap(req.Base, req.Size); + ti->mmio = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); /* Allocate the SRAM memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; - req.Size = sramsize * 1024; - req.AccessSpeed = 250; - ret = pcmcia_request_window(link, &req, &info->sram_win_handle); + link->resource[3]->flags = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[3]->flags |= WIN_USE_WAIT; + link->resource[3]->start = 0; + link->resource[3]->end = sramsize * 1024; + ret = pcmcia_request_window(link, link->resource[3], 250); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase); + ret = pcmcia_map_mem_page(link, link->resource[3], srambase); if (ret) goto failed; ti->sram_base = srambase >> 12; - ti->sram_virt = ioremap(req.Base, req.Size); - ti->sram_phys = req.Base; + ti->sram_virt = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); + ti->sram_phys = link->resource[3]->start; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -301,14 +272,6 @@ failed: return -ENODEV; } /* ibmtr_config */ -/*====================================================================== - - After a card is removed, ibmtr_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void ibmtr_release(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; @@ -316,7 +279,7 @@ static void ibmtr_release(struct pcmcia_device *link) dev_dbg(&link->dev, "ibmtr_release\n"); - if (link->win) { + if (link->resource[2]->end) { struct tok_info *ti = netdev_priv(dev); iounmap(ti->mmio); } @@ -398,9 +361,7 @@ MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids); static struct pcmcia_driver ibmtr_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ibmtr_cs", - }, + .name = "ibmtr_cs", .probe = ibmtr_attach, .remove = ibmtr_detach, .id_table = ibmtr_ids, diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 68f2deeb3ade..1eca4f5a6e78 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -146,7 +146,6 @@ Include Files #include <linux/ioport.h> #include <linux/bitops.h> -#include <pcmcia/cs.h> #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -435,13 +434,6 @@ static const struct net_device_ops mace_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/* ---------------------------------------------------------------------------- -nmclan_attach - Creates an "instance" of the driver, allocating local data - structures for one device. The device is registered with Card - Services. ----------------------------------------------------------------------------- */ - static int nmclan_probe(struct pcmcia_device *link) { mace_private *lp; @@ -460,10 +452,9 @@ static int nmclan_probe(struct pcmcia_device *link) spin_lock_init(&lp->bank_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; + link->config_regs = PRESENT_OPTION; lp->tx_free_frames=AM2150_MAX_TX_FRAMES; @@ -474,14 +465,6 @@ static int nmclan_probe(struct pcmcia_device *link) return nmclan_config(link); } /* nmclan_attach */ -/* ---------------------------------------------------------------------------- -nmclan_detach - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. ----------------------------------------------------------------------------- */ - static void nmclan_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -625,13 +608,6 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr) return 0; } /* mace_init */ -/* ---------------------------------------------------------------------------- -nmclan_config - This routine is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. ----------------------------------------------------------------------------- */ - static int nmclan_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -650,7 +626,7 @@ static int nmclan_config(struct pcmcia_device *link) ret = pcmcia_request_exclusive_irq(link, mace_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -712,12 +688,6 @@ failed: return -ENODEV; } /* nmclan_config */ -/* ---------------------------------------------------------------------------- -nmclan_release - After a card is removed, nmclan_release() will unregister the - net device, and release the PCMCIA configuration. If the device - is still open, this will be postponed until it is closed. ----------------------------------------------------------------------------- */ static void nmclan_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "nmclan_release\n"); @@ -1535,9 +1505,7 @@ MODULE_DEVICE_TABLE(pcmcia, nmclan_ids); static struct pcmcia_driver nmclan_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "nmclan_cs", - }, + .name = "nmclan_cs", .probe = nmclan_probe, .remove = nmclan_detach, .id_table = nmclan_ids, diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index f9b509a6b09a..5d7d1d3088ae 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -42,7 +42,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -238,14 +237,6 @@ static const struct net_device_ops pcnet_netdev_ops = { #endif }; -/*====================================================================== - - pcnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int pcnet_probe(struct pcmcia_device *link) { pcnet_dev_t *info; @@ -260,23 +251,13 @@ static int pcnet_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; dev->netdev_ops = &pcnet_netdev_ops; return pcnet_config(link); } /* pcnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void pcnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -300,22 +281,22 @@ static void pcnet_detach(struct pcmcia_device *link) static hw_info_t *get_hwinfo(struct pcmcia_device *link) { struct net_device *dev = link->priv; - win_req_t req; u_char __iomem *base, *virt; int i, j; /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = 0; link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return NULL; - virt = ioremap(req.Base, req.Size); + virt = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); for (i = 0; i < NR_INFO; i++) { - pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1)); - base = &virt[hw_info[i].offset & (req.Size-1)]; + pcmcia_map_mem_page(link, link->resource[2], + hw_info[i].offset & ~(resource_size(link->resource[2])-1)); + base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)]; if ((readb(base+0) == hw_info[i].a0) && (readb(base+2) == hw_info[i].a1) && (readb(base+4) == hw_info[i].a2)) { @@ -326,7 +307,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) } iounmap(virt); - j = pcmcia_release_window(link, link->win); + j = pcmcia_release_window(link, link->resource[2]); return (i < NR_INFO) ? hw_info+i : NULL; } /* get_hwinfo */ @@ -421,7 +402,7 @@ static hw_info_t *get_ax88190(struct pcmcia_device *link) int i, j; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return NULL; outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ @@ -463,14 +444,6 @@ static hw_info_t *get_hwired(struct pcmcia_device *link) return &default_info; } /* get_hwired */ -/*====================================================================== - - pcnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -502,43 +475,22 @@ static int try_io_port(struct pcmcia_device *link) } } -static int pcnet_confcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data) { int *priv = priv_data; int try = (*priv & 0x1); - int i; - cistpl_io_t *io = &cfg->io; - if (cfg->index == 0 || cfg->io.nwin == 0) - return -EINVAL; + *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; - } + if (p_dev->config_index == 0) + return -EINVAL; - *priv &= ((cfg->mem.nwin == 1) && - (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10; + if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) + return -EINVAL; - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - if (!try) - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - else + if (try) p_dev->io_lines = 16; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); - - return -EINVAL; + return try_io_port(p_dev); } static hw_info_t *pcnet_try_config(struct pcmcia_device *link, @@ -560,15 +512,14 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, if (!link->irq) return NULL; - if (resource_size(link->resource[1]) == 8) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } + if (resource_size(link->resource[1]) == 8) + link->config_flags |= CONF_ENABLE_SPKR; + if ((link->manf_id == MANFID_IBM) && (link->card_id == PRODID_IBM_HOME_AND_AWAY)) - link->conf.ConfigIndex |= 0x10; + link->config_index |= 0x10; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) return NULL; @@ -583,7 +534,7 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, } else dev->if_port = 0; - if ((link->conf.ConfigBase == 0x03c0) && + if ((link->config_base == 0x03c0) && (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { dev_info(&link->dev, "this is an AX88190 card - use axnet_cs instead.\n"); @@ -689,14 +640,6 @@ failed: return -ENODEV; } /* pcnet_config */ -/*====================================================================== - - After a card is removed, pcnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void pcnet_release(struct pcmcia_device *link) { pcnet_dev_t *info = PRIV(link->priv); @@ -709,15 +652,6 @@ static void pcnet_release(struct pcmcia_device *link) pcmcia_disable_device(link); } -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. A CARD_REMOVAL event - also sets some flags to discourage the net drivers from trying - to talk to the card any more. - -======================================================================*/ - static int pcnet_suspend(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -1486,7 +1420,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, { struct net_device *dev = link->priv; pcnet_dev_t *info = PRIV(dev); - win_req_t req; int i, window_size, offset, ret; window_size = (stop_pg - start_pg) << 8; @@ -1497,22 +1430,22 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, window_size = roundup_pow_of_two(window_size); /* Allocate a memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; req.Size = window_size; - req.AccessSpeed = mem_speed; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[3]->flags |= WIN_USE_WAIT; + link->resource[3]->start = 0; link->resource[3]->end = window_size; + ret = pcmcia_request_window(link, link->resource[3], mem_speed); if (ret) goto failed; offset = (start_pg << 8) + cm_offset; offset -= offset % window_size; - ret = pcmcia_map_mem_page(link, link->win, offset); + ret = pcmcia_map_mem_page(link, link->resource[3], offset); if (ret) goto failed; /* Try scribbling on the buffer */ - info->base = ioremap(req.Base, window_size); + info->base = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); for (i = 0; i < (TX_PAGES<<8); i += 2) __raw_writew((i>>1), info->base+offset+i); udelay(100); @@ -1521,19 +1454,20 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, pcnet_reset_8390(dev); if (i != (TX_PAGES<<8)) { iounmap(info->base); - pcmcia_release_window(link, link->win); - info->base = NULL; link->win = 0; + pcmcia_release_window(link, link->resource[3]); + info->base = NULL; goto failed; } ei_status.mem = info->base + offset; - ei_status.priv = req.Size; + ei_status.priv = resource_size(link->resource[3]); dev->mem_start = (u_long)ei_status.mem; - dev->mem_end = dev->mem_start + req.Size; + dev->mem_end = dev->mem_start + resource_size(link->resource[3]); ei_status.tx_start_page = start_pg; ei_status.rx_start_page = start_pg + TX_PAGES; - ei_status.stop_page = start_pg + ((req.Size - offset) >> 8); + ei_status.stop_page = start_pg + ( + (resource_size(link->resource[3]) - offset) >> 8); /* set up block i/o functions */ ei_status.get_8390_hdr = &shmem_get_8390_hdr; @@ -1772,9 +1706,7 @@ MODULE_FIRMWARE("cis/PE-200.cis"); MODULE_FIRMWARE("cis/tamarack.cis"); static struct pcmcia_driver pcnet_driver = { - .drv = { - .name = "pcnet_cs", - }, + .name = "pcnet_cs", .probe = pcnet_probe, .remove = pcnet_detach, .owner = THIS_MODULE, diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 377367d03b41..0af2fc8ec164 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -44,7 +44,6 @@ #include <linux/jiffies.h> #include <linux/firmware.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -300,14 +299,6 @@ static const struct net_device_ops smc_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - smc91c92_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int smc91c92_probe(struct pcmcia_device *link) { struct smc_private *smc; @@ -324,10 +315,6 @@ static int smc91c92_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&smc->lock); - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; /* The SMC91c92-specific entries in the device structure. */ dev->netdev_ops = &smc_netdev_ops; @@ -343,15 +330,6 @@ static int smc91c92_probe(struct pcmcia_device *link) return smc91c92_config(link); } /* smc91c92_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void smc91c92_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -412,26 +390,28 @@ static int mhz_3288_power(struct pcmcia_device *link) mdelay(200); /* Now read and write the COR... */ - tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR); + tmp = readb(smc->base + link->config_base + CISREG_COR); udelay(5); - writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR); + writeb(tmp, smc->base + link->config_base + CISREG_COR); return 0; } -static int mhz_mfc_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) { int k; - p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->io_lines = 16; + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[1]->end = 8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; for (k = 0; k < 0x400; k += 0x10) { if (k & 0x80) continue; p_dev->resource[0]->start = k ^ 0x300; - p_dev->io_lines = 16; if (!pcmcia_request_io(p_dev)) return 0; } @@ -442,14 +422,11 @@ static int mhz_mfc_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); - win_req_t req; unsigned int offset; int i; - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[1]->end = 8; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ | + CONF_AUTO_SET_IO; /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ @@ -459,16 +436,16 @@ static int mhz_mfc_config(struct pcmcia_device *link) dev->base_addr = link->resource[0]->start; /* Allocate a memory window, for accessing the ISR */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return -ENODEV; - smc->base = ioremap(req.Base, req.Size); - offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0; - i = pcmcia_map_mem_page(link, link->win, offset); + smc->base = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); + offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0; + i = pcmcia_map_mem_page(link, link->resource[2], offset); if ((i == 0) && (smc->manfid == MANFID_MEGAHERTZ) && (smc->cardid == PRODID_MEGAHERTZ_EM3288)) @@ -591,14 +568,12 @@ static int mot_setup(struct pcmcia_device *link) /*====================================================================*/ -static int smc_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + return pcmcia_request_io(p_dev); } @@ -607,7 +582,8 @@ static int smc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; int i; - link->resource[0]->end = 16; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) dev->base_addr = link->resource[0]->start; @@ -640,15 +616,14 @@ static int osi_config(struct pcmcia_device *link) static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; int i, j; - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ; link->resource[0]->end = 64; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->end = 8; /* Enable Hard Decode, LAN, Modem */ - link->conf.ConfigIndex = 0x23; link->io_lines = 16; + link->config_index = 0x23; for (i = j = 0; j < 4; j++) { link->resource[1]->start = com[j]; @@ -658,7 +633,7 @@ static int osi_config(struct pcmcia_device *link) } if (i != 0) { /* Fallback: turn off hard decode */ - link->conf.ConfigIndex = 0x03; + link->config_index = 0x03; link->resource[1]->end = 0; i = pcmcia_request_io(link); } @@ -817,27 +792,16 @@ static int check_sig(struct pcmcia_device *link) } if (width) { - modconf_t mod = { - .Attributes = CONF_IO_CHANGE_WIDTH, - }; printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n"); smc91c92_suspend(link); - pcmcia_modify_configuration(link, &mod); + pcmcia_fixup_iowidth(link); smc91c92_resume(link); return check_sig(link); } return -ENODEV; } -/*====================================================================== - - smc91c92_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int smc91c92_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -869,7 +833,7 @@ static int smc91c92_config(struct pcmcia_device *link) i = pcmcia_request_irq(link, smc_interrupt); if (i) goto config_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i) goto config_failed; @@ -988,18 +952,10 @@ config_failed: return -ENODEV; } /* smc91c92_config */ -/*====================================================================== - - After a card is removed, smc91c92_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void smc91c92_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "smc91c92_release\n"); - if (link->win) { + if (link->resource[2]->end) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); iounmap(smc->base); @@ -2101,9 +2057,7 @@ MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids); static struct pcmcia_driver smc91c92_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "smc91c92_cs", - }, + .name = "smc91c92_cs", .probe = smc91c92_probe, .remove = smc91c92_detach, .id_table = smc91c92_ids, diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index f5819526b5ee..1fece617c069 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -82,7 +82,6 @@ #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -267,33 +266,11 @@ static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg); static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data, int len); -/* - * The event() function is this driver's Card Services event handler. - * It will be called by Card Services when an appropriate card status - * event is received. The config() and release() entry points are - * used to configure or release a socket, in response to card insertion - * and ejection events. They are invoked from the event handler. - */ - static int has_ce2_string(struct pcmcia_device * link); static int xirc2ps_config(struct pcmcia_device * link); static void xirc2ps_release(struct pcmcia_device * link); - -/**************** - * The attach() and detach() entry points are used to create and destroy - * "instances" of the driver, where each instance represents everything - * needed to manage one actual PCMCIA card. - */ - static void xirc2ps_detach(struct pcmcia_device *p_dev); -/**************** - * You'll also need to prototype all the functions that will actually - * be used to talk to your device. See 'pcmem_cs' for a good example - * of a fully self-sufficient driver; the other drivers rely more or - * less on other parts of the kernel. - */ - static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id); typedef struct local_info_t { @@ -501,16 +478,6 @@ static const struct net_device_ops netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/**************** - * xirc2ps_attach() creates an "instance" of the driver, allocating - * local data structures for one device. The device is registered - * with Card Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a - * card insertion event. - */ - static int xirc2ps_probe(struct pcmcia_device *link) { @@ -529,9 +496,7 @@ xirc2ps_probe(struct pcmcia_device *link) link->priv = dev; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_index = 1; /* Fill in card specific entries */ dev->netdev_ops = &netdev_ops; @@ -542,13 +507,6 @@ xirc2ps_probe(struct pcmcia_device *link) return xirc2ps_config(link); } /* xirc2ps_attach */ -/**************** - * This deletes a driver "instance". The device is de-registered - * with Card Services. If it has been released, all local data - * structures are freed. Otherwise, the structures will be freed - * when the device is released. - */ - static void xirc2ps_detach(struct pcmcia_device *link) { @@ -667,44 +625,53 @@ has_ce2_string(struct pcmcia_device * p_dev) } static int -xirc2ps_config_modem(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data) { unsigned int ioaddr; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = ioaddr; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 16; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + + p_dev->resource[1]->start = p_dev->resource[0]->start; + for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } static int -xirc2ps_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data) { int *pass = priv_data; + resource_size_t tmp = p_dev->resource[1]->start; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = p_dev->resource[1]->start - + (*pass ? (cf->index & 0x20 ? -24:8) - : (cf->index & 0x20 ? 8:-24)); - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8) + : (p_dev->config_index & 0x20 ? 8 : -24)); + + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 18; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[0]->start = tmp; + return pcmcia_request_io(p_dev); } @@ -727,11 +694,6 @@ static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev, }; -/**************** - * xirc2ps_config() is scheduled to run after a CARD_INSERTION event - * is received, to configure the PCMCIA socket, and to make the - * ethernet device available to the system. - */ static int xirc2ps_config(struct pcmcia_device * link) { @@ -807,32 +769,24 @@ xirc2ps_config(struct pcmcia_device * link) goto failure; } - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->io_lines = 10; if (local->modem) { int pass; + link->config_flags |= CONF_AUTO_SET_IO; - if (do_sound) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status |= CCSR_AUDIO_ENA; - } - link->resource[1]->end = 8; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ - link->resource[0]->end = 16; /* no Mako stuff anymore */ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) goto port_found; } else { - link->resource[0]->end = 18; /* We do 2 passes here: The first one uses the regular mapping and * the second tries again, thereby considering that the 32 ports are * mirrored every 32 bytes. Actually we use a mirrored port for * the Mako if (on the first pass) the COR bit 5 is set. */ for (pass=0; pass < 2; pass++) - if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass)) + if (!pcmcia_loop_config(link, xirc2ps_config_check, + &pass)) goto port_found; /* if special option: * try to configure as Ethernet only. @@ -840,7 +794,9 @@ xirc2ps_config(struct pcmcia_device * link) } printk(KNOT_XIRC "no ports available\n"); } else { + link->io_lines = 10; link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { link->resource[0]->start = ioaddr; if (!(err = pcmcia_request_io(link))) @@ -861,16 +817,14 @@ xirc2ps_config(struct pcmcia_device * link) if ((err=pcmcia_request_irq(link, xirc2ps_interrupt))) goto config_error; - /**************** - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping. - */ - if ((err=pcmcia_request_configuration(link, &link->conf))) + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + if ((err = pcmcia_enable_device(link))) goto config_error; if (local->dingo) { - win_req_t req; - /* Reset the modem's BAR to the correct value * This is necessary because in the RequestConfiguration call, * the base address of the ethernet port (BasePort1) is written @@ -890,14 +844,14 @@ xirc2ps_config(struct pcmcia_device * link) * is at 0x0800. So we allocate a window into the attribute * memory and write direct to the CIS registers */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = req.Size = 0; - req.AccessSpeed = 0; - if ((err = pcmcia_request_window(link, &req, &link->win))) + link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | + WIN_ENABLE; + link->resource[2]->start = link->resource[2]->end = 0; + if ((err = pcmcia_request_window(link, link->resource[2], 0))) goto config_error; - local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; - if ((err = pcmcia_map_mem_page(link, link->win, 0))) + local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800; + if ((err = pcmcia_map_mem_page(link, link->resource[2], 0))) goto config_error; /* Setup the CCRs; there are no infos in the CIS about the Ethernet @@ -978,17 +932,12 @@ xirc2ps_config(struct pcmcia_device * link) return -ENODEV; } /* xirc2ps_config */ -/**************** - * After a card is removed, xirc2ps_release() will unregister the net - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void xirc2ps_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "release\n"); - if (link->win) { + if (link->resource[2]->end) { struct net_device *dev = link->priv; local_info_t *local = netdev_priv(dev); if (local->dingo) @@ -1830,9 +1779,7 @@ MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids); static struct pcmcia_driver xirc2ps_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "xirc2ps_cs", - }, + .name = "xirc2ps_cs", .probe = xirc2ps_probe, .remove = xirc2ps_detach, .id_table = xirc2ps_ids, diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 10cf0cbc2185..726df611ee17 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -72,6 +72,7 @@ static const char version[] = #include <linux/sched.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/errno.h> #include <linux/ioport.h> #include <linux/crc32.h> diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 9a121a5b787c..df2484d45474 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -32,7 +32,6 @@ #include <linux/timer.h> #include <linux/netdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -54,58 +53,21 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the airo_cs - event handler. -*/ - static int airo_config(struct pcmcia_device *link); static void airo_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void airo_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - airo_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int airo_probe(struct pcmcia_device *p_dev) { local_info_t *local; dev_dbg(&p_dev->dev, "airo_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -117,15 +79,6 @@ static int airo_probe(struct pcmcia_device *p_dev) return airo_config(p_dev); } /* airo_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void airo_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_detach\n"); @@ -140,60 +93,12 @@ static void airo_detach(struct pcmcia_device *link) kfree(link->priv); } /* airo_detach */ -/*====================================================================== - - airo_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - -static int airo_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } @@ -206,20 +111,9 @@ static int airo_config(struct pcmcia_device *link) dev_dbg(&link->dev, "airo_config\n"); - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, airo_cs_config_check, NULL); if (ret) goto failed; @@ -227,12 +121,7 @@ static int airo_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; ((local_info_t *)link->priv)->eth_dev = @@ -241,17 +130,6 @@ static int airo_config(struct pcmcia_device *link) if (!((local_info_t *)link->priv)->eth_dev) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); return 0; failed: @@ -259,14 +137,6 @@ static int airo_config(struct pcmcia_device *link) return -ENODEV; } /* airo_config */ -/*====================================================================== - - After a card is removed, airo_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void airo_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_release\n"); @@ -305,9 +175,7 @@ MODULE_DEVICE_TABLE(pcmcia, airo_ids); static struct pcmcia_driver airo_driver = { .owner = THIS_MODULE, - .drv = { - .name = "airo_cs", - }, + .name = "airo_cs", .probe = airo_probe, .remove = airo_detach, .id_table = airo_ids, @@ -315,12 +183,12 @@ static struct pcmcia_driver airo_driver = { .resume = airo_resume, }; -static int airo_cs_init(void) +static int __init airo_cs_init(void) { return pcmcia_register_driver(&airo_driver); } -static void airo_cs_cleanup(void) +static void __exit airo_cs_cleanup(void) { pcmcia_unregister_driver(&airo_driver); } diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 3b632161c106..c96e19da2949 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -42,7 +42,6 @@ #include <linux/moduleparam.h> #include <linux/device.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -64,58 +63,21 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the atmel_cs - event handler. -*/ - static int atmel_config(struct pcmcia_device *link); static void atmel_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void atmel_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - atmel_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int atmel_probe(struct pcmcia_device *p_dev) { local_info_t *local; dev_dbg(&p_dev->dev, "atmel_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -127,15 +89,6 @@ static int atmel_probe(struct pcmcia_device *p_dev) return atmel_config(p_dev); } /* atmel_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void atmel_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "atmel_detach\n"); @@ -145,14 +98,6 @@ static void atmel_detach(struct pcmcia_device *link) kfree(link->priv); } -/*====================================================================== - - atmel_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - /* Call-back function to interrogate PCMCIA-specific information about the current existance of the card */ static int card_present(void *arg) @@ -165,47 +110,11 @@ static int card_present(void *arg) return 0; } -static int atmel_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int atmel_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -220,18 +129,9 @@ static int atmel_config(struct pcmcia_device *link) dev_dbg(&link->dev, "atmel_config\n"); - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + if (pcmcia_loop_config(link, atmel_config_check, NULL)) goto failed; @@ -240,12 +140,7 @@ static int atmel_config(struct pcmcia_device *link) goto failed; } - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -267,14 +162,6 @@ static int atmel_config(struct pcmcia_device *link) return -ENODEV; } -/*====================================================================== - - After a card is removed, atmel_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void atmel_release(struct pcmcia_device *link) { struct net_device *dev = ((local_info_t*)link->priv)->eth_dev; @@ -353,9 +240,7 @@ MODULE_DEVICE_TABLE(pcmcia, atmel_ids); static struct pcmcia_driver atmel_driver = { .owner = THIS_MODULE, - .drv = { - .name = "atmel_cs", - }, + .name = "atmel_cs", .probe = atmel_probe, .remove = atmel_detach, .id_table = atmel_ids, @@ -363,12 +248,12 @@ static struct pcmcia_driver atmel_driver = { .resume = atmel_resume, }; -static int atmel_cs_init(void) +static int __init atmel_cs_init(void) { return pcmcia_register_driver(&atmel_driver); } -static void atmel_cs_cleanup(void) +static void __exit atmel_cs_cleanup(void) { pcmcia_unregister_driver(&atmel_driver); } diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index dfbc41d431ff..7dcba5fafdc7 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -26,7 +26,6 @@ #include <linux/ssb/ssb.h> #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -63,7 +62,6 @@ static int b43_pcmcia_resume(struct pcmcia_device *dev) static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) { struct ssb_bus *ssb; - win_req_t win; int err = -ENOMEM; int res = 0; @@ -73,30 +71,28 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) err = -ENODEV; - dev->conf.Attributes = CONF_ENABLE_IRQ; - dev->conf.IntType = INT_MEMORY_AND_IO; + dev->config_flags |= CONF_ENABLE_IRQ; - win.Attributes = WIN_ENABLE | WIN_DATA_WIDTH_16 | + dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 | WIN_USE_WAIT; - win.Base = 0; - win.Size = SSB_CORE_SIZE; - win.AccessSpeed = 250; - res = pcmcia_request_window(dev, &win, &dev->win); + dev->resource[2]->start = 0; + dev->resource[2]->end = SSB_CORE_SIZE; + res = pcmcia_request_window(dev, dev->resource[2], 250); if (res != 0) goto err_kfree_ssb; - res = pcmcia_map_mem_page(dev, dev->win, 0); + res = pcmcia_map_mem_page(dev, dev->resource[2], 0); if (res != 0) goto err_disable; if (!dev->irq) goto err_disable; - res = pcmcia_request_configuration(dev, &dev->conf); + res = pcmcia_enable_device(dev); if (res != 0) goto err_disable; - err = ssb_bus_pcmciabus_register(ssb, dev, win.Base); + err = ssb_bus_pcmciabus_register(ssb, dev, dev->resource[2]->start); if (err) goto err_disable; dev->priv = ssb; @@ -125,9 +121,7 @@ static void __devexit b43_pcmcia_remove(struct pcmcia_device *dev) static struct pcmcia_driver b43_pcmcia_driver = { .owner = THIS_MODULE, - .drv = { - .name = "b43-pcmcia", - }, + .name = "b43-pcmcia", .id_table = b43_pcmcia_tbl, .probe = b43_pcmcia_probe, .remove = __devexit_p(b43_pcmcia_remove), diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ba54d1b04d22..bd8a4134edeb 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -12,7 +12,6 @@ #include <linux/wireless.h> #include <net/iw_handler.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -437,7 +436,6 @@ static int hostap_cs_probe(struct pcmcia_device *p_dev) int ret; PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info); - p_dev->conf.IntType = INT_MEMORY_AND_IO; ret = prism2_config(p_dev); if (ret) { @@ -468,74 +466,11 @@ static void prism2_detach(struct pcmcia_device *link) } -/* run after a CARD_INSERTION event is received to configure the PCMCIA - * socket and make the device available to the system */ - -static int prism2_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X " - "(default 0x%02X)\n", cfg->index, dflt->index); - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping" - " this entry\n"); - return -ENODEV; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch " - "- skipping this entry\n"); - return -ENODEV; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " - "dflt->io.nwin=%d\n", - cfg->io.nwin, dflt->io.nwin); - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -557,6 +492,10 @@ static int prism2_config(struct pcmcia_device *link) } /* Look for an appropriate configuration table entry in the CIS */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | + CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, prism2_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -588,12 +527,7 @@ static int prism2_config(struct pcmcia_device *link) if (ret) goto failed_unlock; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed_unlock; @@ -602,20 +536,6 @@ static int prism2_config(struct pcmcia_device *link) spin_unlock_irqrestore(&local->irq_init_lock, flags); - /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x: ", - dev_info, link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp / 10, - link->conf.Vpp % 10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - local->shutdown = 0; sandisk_enable_wireless(dev); @@ -627,7 +547,7 @@ static int prism2_config(struct pcmcia_device *link) return ret; failed_unlock: - spin_unlock_irqrestore(&local->irq_init_lock, flags); + spin_unlock_irqrestore(&local->irq_init_lock, flags); failed: kfree(hw_priv); prism2_release((u_long)link); @@ -779,9 +699,7 @@ MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids); static struct pcmcia_driver hostap_driver = { - .drv = { - .name = "hostap_cs", - }, + .name = "hostap_cs", .probe = hostap_cs_probe, .remove = prism2_detach, .owner = THIS_MODULE, diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 9c298396be50..ff1280f41336 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -28,7 +28,6 @@ #include <linux/firmware.h> #include <linux/netdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -761,15 +760,6 @@ static int if_cs_host_to_card(struct lbs_private *priv, } -/********************************************************************/ -/* Card Services */ -/********************************************************************/ - -/* - * After a card is removed, if_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void if_cs_release(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; @@ -785,31 +775,12 @@ static void if_cs_release(struct pcmcia_device *p_dev) } -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. - */ - -static int if_cs_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - /* IO window settings */ - if (cfg->io.nwin != 1) { + if (p_dev->resource[1]->end) { lbs_pr_err("wrong CIS (check number of IO windows)\n"); return -ENODEV; } @@ -835,15 +806,13 @@ static int if_cs_probe(struct pcmcia_device *p_dev) card->p_dev = p_dev; p_dev->priv = card; - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) { lbs_pr_err("error in pcmcia_loop_config\n"); goto out1; } - /* * Allocate an interrupt line. Note that this does not assign * a handler to the interrupt, unless the 'Handler' member of @@ -861,14 +830,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out1; } - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(p_dev, &p_dev->conf); + ret = pcmcia_enable_device(p_dev); if (ret) { - lbs_pr_err("error in pcmcia_request_configuration\n"); + lbs_pr_err("error in pcmcia_enable_device\n"); goto out2; } @@ -962,12 +926,6 @@ out: } -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void if_cs_detach(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; @@ -1000,9 +958,7 @@ MODULE_DEVICE_TABLE(pcmcia, if_cs_ids); static struct pcmcia_driver lbs_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRV_NAME, - }, + .name = DRV_NAME, .probe = if_cs_probe, .remove = if_cs_detach, .id_table = if_cs_ids, diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index ef46a2d88539..71b3d68b9403 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -93,14 +92,6 @@ orinoco_cs_hard_reset(struct orinoco_private *priv) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int orinoco_cs_probe(struct pcmcia_device *link) { @@ -117,23 +108,9 @@ orinoco_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return orinoco_cs_config(link); } /* orinoco_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void orinoco_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -145,76 +122,12 @@ static void orinoco_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* orinoco_cs_detach */ -/* - * orinoco_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - -static int orinoco_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; - -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -225,20 +138,10 @@ orinoco_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -262,12 +165,7 @@ orinoco_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -291,11 +189,6 @@ orinoco_cs_config(struct pcmcia_device *link) return -ENODEV; } /* orinoco_cs_config */ -/* - * After a card is removed, orinoco_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void orinoco_cs_release(struct pcmcia_device *link) { @@ -344,12 +237,6 @@ static int orinoco_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (David Gibson <hermes@gibson.dropbear.id.au>, " - "Pavel Roskin <proski@gnu.org>, et al)"; - static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ @@ -441,9 +328,7 @@ MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = orinoco_cs_probe, .remove = orinoco_cs_detach, .id_table = orinoco_cs_ids, @@ -454,8 +339,6 @@ static struct pcmcia_driver orinoco_driver = { static int __init init_orinoco_cs(void) { - printk(KERN_DEBUG "%s\n", version); - return pcmcia_register_driver(&orinoco_driver); } diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 873877e17e1b..fb859a5ad2eb 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -25,7 +25,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -154,14 +153,6 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int spectrum_cs_probe(struct pcmcia_device *link) { @@ -179,23 +170,9 @@ spectrum_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return spectrum_cs_config(link); } /* spectrum_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void spectrum_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -207,76 +184,13 @@ static void spectrum_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* spectrum_cs_detach */ -/* - * spectrum_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - static int spectrum_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; - -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -287,20 +201,10 @@ spectrum_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -325,12 +229,7 @@ spectrum_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); hw->eeprom_pda = true; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -358,11 +257,6 @@ spectrum_cs_config(struct pcmcia_device *link) return -ENODEV; } /* spectrum_cs_config */ -/* - * After a card is removed, spectrum_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void spectrum_cs_release(struct pcmcia_device *link) { @@ -407,12 +301,6 @@ spectrum_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin <proski@gnu.org>," - " David Gibson <hermes@gibson.dropbear.id.au>, et al)"; - static struct pcmcia_device_id spectrum_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */ PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ @@ -423,9 +311,7 @@ MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = spectrum_cs_probe, .remove = spectrum_cs_detach, .suspend = spectrum_cs_suspend, @@ -436,8 +322,6 @@ static struct pcmcia_driver orinoco_driver = { static int __init init_spectrum_cs(void) { - printk(KERN_DEBUG "%s\n", version); - return pcmcia_register_driver(&orinoco_driver); } diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 88560d0ae50a..af5b17ce5a15 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -46,7 +46,6 @@ #include <linux/ethtool.h> #include <linux/ieee80211.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -169,13 +168,6 @@ static int bc; */ static char *phy_addr = NULL; - -/* A struct pcmcia_device structure has fields for most things that are needed - to keep track of a socket, but there will usually be some device - specific information that also needs to be kept track of. The - 'priv' pointer in a struct pcmcia_device structure can be used to point to - a device-specific private data structure, like this. -*/ static unsigned int ray_mem_speed = 500; /* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */ @@ -290,14 +282,6 @@ static const struct net_device_ops ray_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*============================================================================= - ray_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. -=============================================================================*/ static int ray_probe(struct pcmcia_device *p_dev) { ray_dev_t *local; @@ -318,9 +302,8 @@ static int ray_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; + p_dev->config_flags |= CONF_ENABLE_IRQ; + p_dev->config_index = 1; p_dev->priv = dev; @@ -353,12 +336,6 @@ fail_alloc_dev: return -ENOMEM; } /* ray_attach */ -/*============================================================================= - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. -=============================================================================*/ static void ray_detach(struct pcmcia_device *link) { struct net_device *dev; @@ -381,17 +358,11 @@ static void ray_detach(struct pcmcia_device *link) dev_dbg(&link->dev, "ray_cs ray_detach ending\n"); } /* ray_detach */ -/*============================================================================= - ray_config() is run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -=============================================================================*/ #define MAX_TUPLE_SIZE 128 static int ray_config(struct pcmcia_device *link) { int ret = 0; int i; - win_req_t req; struct net_device *dev = (struct net_device *)link->priv; ray_dev_t *local = netdev_priv(dev); @@ -412,54 +383,50 @@ static int ray_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - /* This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /*** Set up 32k window for shared memory (transmit and control) ************/ - req.Attributes = - WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x8000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; + link->resource[2]->start = 0; + link->resource[2]->end = 0x8000; + ret = pcmcia_request_window(link, link->resource[2], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, link->win, 0); + ret = pcmcia_map_mem_page(link, link->resource[2], 0); if (ret) goto failed; - local->sram = ioremap(req.Base, req.Size); + local->sram = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); /*** Set up 16k window for shared memory (receive buffer) ***************/ - req.Attributes = + link->resource[3]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x4000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &local->rmem_handle); + link->resource[3]->start = 0; + link->resource[3]->end = 0x4000; + ret = pcmcia_request_window(link, link->resource[3], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000); + ret = pcmcia_map_mem_page(link, link->resource[3], 0x8000); if (ret) goto failed; - local->rmem = ioremap(req.Base, req.Size); + local->rmem = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); /*** Set up window for attribute memory ***********************************/ - req.Attributes = + link->resource[4]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x1000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &local->amem_handle); + link->resource[4]->start = 0; + link->resource[4]->end = 0x1000; + ret = pcmcia_request_window(link, link->resource[4], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, local->amem_handle, 0); + ret = pcmcia_map_mem_page(link, link->resource[4], 0); if (ret) goto failed; - local->amem = ioremap(req.Base, req.Size); + local->amem = ioremap(link->resource[4]->start, + resource_size(link->resource[4])); dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram); dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem); @@ -775,11 +742,7 @@ static void join_net(u_long data) local->card_status = CARD_DOING_ACQ; } -/*============================================================================ - After a card is removed, ray_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -=============================================================================*/ + static void ray_release(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -2847,9 +2810,7 @@ MODULE_DEVICE_TABLE(pcmcia, ray_ids); static struct pcmcia_driver ray_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ray_cs", - }, + .name = "ray_cs", .probe = ray_probe, .remove = ray_detach, .id_table = ray_ids, diff --git a/drivers/net/wireless/ray_cs.h b/drivers/net/wireless/ray_cs.h index 9f01ddb19748..e79848fbcca1 100644 --- a/drivers/net/wireless/ray_cs.h +++ b/drivers/net/wireless/ray_cs.h @@ -25,8 +25,6 @@ struct beacon_rx { typedef struct ray_dev_t { int card_status; int authentication_state; - window_handle_t amem_handle; /* handle to window for attribute memory */ - window_handle_t rmem_handle; /* handle to window for rx buffer on card */ void __iomem *sram; /* pointer to beginning of shared RAM */ void __iomem *amem; /* pointer to attribute mem window */ void __iomem *rmem; /* pointer to receive buffer window */ diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index a1cc2d498a1c..ca3f8961fa27 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -48,7 +48,6 @@ #include <net/iw_handler.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -78,13 +77,6 @@ #define WL3501_RESUME 0 #define WL3501_SUSPEND 1 -/* - * The event() function is this driver's Card Services event handler. It will - * be called by Card Services when an appropriate card status event is - * received. The config() and release() entry points are used to configure or - * release a socket, in response to card insertion and ejection events. They - * are invoked from the wl24 event handler. - */ static int wl3501_config(struct pcmcia_device *link); static void wl3501_release(struct pcmcia_device *link); @@ -1869,15 +1861,6 @@ static const struct net_device_ops wl3501_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/** - * wl3501_attach - creates an "instance" of the driver - * - * Creates an "instance" of the driver, allocating local data structures for - * one device. The device is registered with Card Services. - * - * The dev_link structure is initialized, but we don't actually configure the - * card at this point -- we wait until we receive a card insertion event. - */ static int wl3501_probe(struct pcmcia_device *p_dev) { struct net_device *dev; @@ -1888,9 +1871,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; + p_dev->config_flags = CONF_ENABLE_IRQ; + p_dev->config_index = 1; dev = alloc_etherdev(sizeof(struct wl3501_card)); if (!dev) @@ -1914,14 +1896,6 @@ out_link: return -ENOMEM; } -/** - * wl3501_config - configure the PCMCIA socket and make eth device available - * @link - FILL_IN - * - * wl3501_config() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - */ static int wl3501_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -1952,10 +1926,7 @@ static int wl3501_config(struct pcmcia_device *link) if (ret) goto failed; - /* This actually configures the PCMCIA socket -- setting up the I/O - * windows and the interrupt mapping. */ - - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -2010,14 +1981,6 @@ failed: return -ENODEV; } -/** - * wl3501_release - unregister the net, release PCMCIA configuration - * @arg - link - * - * After a card is removed, wl3501_release() will unregister the net device, - * and release the PCMCIA configuration. If the device is still open, this - * will be postponed until it is closed. - */ static void wl3501_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -2056,9 +2019,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl3501_ids); static struct pcmcia_driver wl3501_driver = { .owner = THIS_MODULE, - .drv = { - .name = "wl3501_cs", - }, + .name = "wl3501_cs", .probe = wl3501_probe, .remove = wl3501_detach, .id_table = wl3501_ids, diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 23e50f4a27c5..787ebdeae310 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -48,7 +48,6 @@ #include <linux/parport.h> #include <linux/parport_pc.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/cisreg.h> @@ -81,14 +80,6 @@ static void parport_detach(struct pcmcia_device *p_dev); static int parport_config(struct pcmcia_device *link); static void parport_cs_release(struct pcmcia_device *); -/*====================================================================== - - parport_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int parport_probe(struct pcmcia_device *link) { parport_info_t *info; @@ -101,23 +92,11 @@ static int parport_probe(struct pcmcia_device *link) link->priv = info; info->p_dev = link; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return parport_config(link); } /* parport_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void parport_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "parport_detach\n"); @@ -127,36 +106,14 @@ static void parport_detach(struct pcmcia_device *link) kfree(link->priv); } /* parport_detach */ -/*====================================================================== - - parport_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - parport device available to the system. - -======================================================================*/ - -static int parport_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int parport_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - if (epp_mode) - p_dev->conf.ConfigIndex |= FORCE_EPP_MODE; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin == 2) { - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - return 0; - } - return -ENODEV; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int parport_config(struct pcmcia_device *link) @@ -167,13 +124,16 @@ static int parport_config(struct pcmcia_device *link) dev_dbg(&link->dev, "parport_config\n"); + if (epp_mode) + link->config_index |= FORCE_EPP_MODE; + ret = pcmcia_loop_config(link, parport_config_check, NULL); if (ret) goto failed; if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -202,14 +162,6 @@ failed: return -ENODEV; } /* parport_config */ -/*====================================================================== - - After a card is removed, parport_cs_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void parport_cs_release(struct pcmcia_device *link) { parport_info_t *info = link->priv; @@ -236,9 +188,7 @@ MODULE_DEVICE_TABLE(pcmcia, parport_ids); static struct pcmcia_driver parport_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "parport_cs", - }, + .name = "parport_cs", .probe = parport_probe, .remove = parport_detach, .id_table = parport_ids, diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 3de3a436a432..0157708d474d 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -36,6 +36,7 @@ #include <linux/tboot.h> #include <linux/dmi.h> #include <linux/slab.h> +#include <asm/iommu_table.h> #define PREFIX "DMAR: " @@ -687,7 +688,7 @@ failed: return 0; } -void __init detect_intel_iommu(void) +int __init detect_intel_iommu(void) { int ret; @@ -723,6 +724,8 @@ void __init detect_intel_iommu(void) } early_acpi_os_unmap_memory(dmar_tbl, dmar_tbl_size); dmar_tbl = NULL; + + return ret ? 1 : -ENODEV; } @@ -1455,3 +1458,4 @@ int __init dmar_ir_support(void) return 0; return dmar->flags & 0x1; } +IOMMU_INIT_POST(detect_intel_iommu); diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c index 88c4c4098789..95dd7c62741f 100644 --- a/drivers/pcmcia/au1000_generic.c +++ b/drivers/pcmcia/au1000_generic.c @@ -441,14 +441,12 @@ int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops, out_err: - flush_scheduled_work(); ops->hw_shutdown(skt); while (i-- > 0) { skt = PCMCIA_SOCKET(i); del_timer_sync(&skt->poll_timer); pcmcia_unregister_socket(&skt->socket); - flush_scheduled_work(); if (i == 0) { iounmap(skt->virt_io + (u32)mips_io_port_base); skt->virt_io = NULL; @@ -480,7 +478,6 @@ int au1x00_drv_pcmcia_remove(struct platform_device *dev) del_timer_sync(&skt->poll_timer); pcmcia_unregister_socket(&skt->socket); - flush_scheduled_work(); skt->ops->hw_shutdown(skt); au1x00_pcmcia_config_skt(skt, &dead_socket); iounmap(skt->virt_io + (u32)mips_io_port_base); diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h index 67530cefcf3c..5c36bda2963b 100644 --- a/drivers/pcmcia/au1000_generic.h +++ b/drivers/pcmcia/au1000_generic.h @@ -23,7 +23,6 @@ /* include the world */ -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c index 807f2d75dad3..b2396647a165 100644 --- a/drivers/pcmcia/au1000_pb1x00.c +++ b/drivers/pcmcia/au1000_pb1x00.c @@ -31,7 +31,6 @@ #include <linux/proc_fs.h> #include <linux/types.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index 91414a0ddc44..884a984216fe 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -28,7 +28,6 @@ #include <asm/unaligned.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 2ec8ac97445c..d9ea192c4001 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -33,7 +33,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -845,7 +844,7 @@ static int pcmcia_socket_dev_resume_noirq(struct device *dev) return __pcmcia_pm_op(dev, socket_early_resume); } -static int pcmcia_socket_dev_resume(struct device *dev) +static int __used pcmcia_socket_dev_resume(struct device *dev) { return __pcmcia_pm_op(dev, socket_late_resume); } diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h index da055dc14d98..7f1953f78b12 100644 --- a/drivers/pcmcia/cs_internal.h +++ b/drivers/pcmcia/cs_internal.h @@ -33,18 +33,9 @@ typedef struct config_t { struct kref ref; unsigned int state; - unsigned int Attributes; - unsigned int IntType; - unsigned int ConfigBase; - unsigned char Status, Pin, Copy, Option, ExtStatus; - unsigned int CardValues; struct resource io[MAX_IO_WIN]; /* io ports */ struct resource mem[MAX_WIN]; /* mem areas */ - - struct { - u_int Attributes; - } irq; } config_t; diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 55570d9e1e4c..100c4412457d 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -26,7 +26,6 @@ #include <linux/dma-mapping.h> #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/ss.h> @@ -52,7 +51,7 @@ static void pcmcia_check_driver(struct pcmcia_driver *p_drv) if (!p_drv->probe || !p_drv->remove) printk(KERN_DEBUG "pcmcia: %s lacks a requisite callback " - "function\n", p_drv->drv.name); + "function\n", p_drv->name); while (did && did->match_flags) { for (i = 0; i < 4; i++) { @@ -65,7 +64,7 @@ static void pcmcia_check_driver(struct pcmcia_driver *p_drv) printk(KERN_DEBUG "pcmcia: %s: invalid hash for " "product string \"%s\": is 0x%x, should " - "be 0x%x\n", p_drv->drv.name, did->prod_id[i], + "be 0x%x\n", p_drv->name, did->prod_id[i], did->prod_id_hash[i], hash); printk(KERN_DEBUG "pcmcia: see " "Documentation/pcmcia/devicetable.txt for " @@ -180,10 +179,11 @@ int pcmcia_register_driver(struct pcmcia_driver *driver) /* initialize common fields */ driver->drv.bus = &pcmcia_bus_type; driver->drv.owner = driver->owner; + driver->drv.name = driver->name; mutex_init(&driver->dynids.lock); INIT_LIST_HEAD(&driver->dynids.list); - pr_debug("registering driver %s\n", driver->drv.name); + pr_debug("registering driver %s\n", driver->name); error = driver_register(&driver->drv); if (error < 0) @@ -203,7 +203,7 @@ EXPORT_SYMBOL(pcmcia_register_driver); */ void pcmcia_unregister_driver(struct pcmcia_driver *driver) { - pr_debug("unregistering driver %s\n", driver->drv.name); + pr_debug("unregistering driver %s\n", driver->name); driver_unregister(&driver->drv); pcmcia_free_dynids(driver); } @@ -264,7 +264,7 @@ static int pcmcia_device_probe(struct device *dev) p_drv = to_pcmcia_drv(dev->driver); s = p_dev->socket; - dev_dbg(dev, "trying to bind to %s\n", p_drv->drv.name); + dev_dbg(dev, "trying to bind to %s\n", p_drv->name); if ((!p_drv->probe) || (!p_dev->function_config) || (!try_module_get(p_drv->owner))) { @@ -276,21 +276,28 @@ static int pcmcia_device_probe(struct device *dev) ret = pccard_read_tuple(p_dev->socket, p_dev->func, CISTPL_CONFIG, &cis_config); if (!ret) { - p_dev->conf.ConfigBase = cis_config.base; - p_dev->conf.Present = cis_config.rmask[0]; + p_dev->config_base = cis_config.base; + p_dev->config_regs = cis_config.rmask[0]; + dev_dbg(dev, "base %x, regs %x", p_dev->config_base, + p_dev->config_regs); } else { dev_printk(KERN_INFO, dev, "pcmcia: could not parse base and rmask0 of CIS\n"); - p_dev->conf.ConfigBase = 0; - p_dev->conf.Present = 0; + p_dev->config_base = 0; + p_dev->config_regs = 0; } ret = p_drv->probe(p_dev); if (ret) { dev_dbg(dev, "binding to %s failed with %d\n", - p_drv->drv.name, ret); + p_drv->name, ret); goto put_module; } + dev_dbg(dev, "%s bound: Vpp %d.%d, idx %x, IRQ %d", p_drv->name, + p_dev->vpp/10, p_dev->vpp%10, p_dev->config_index, p_dev->irq); + dev_dbg(dev, "resources: ioport %pR %pR iomem %pR %pR %pR", + p_dev->resource[0], p_dev->resource[1], p_dev->resource[2], + p_dev->resource[3], p_dev->resource[4]); mutex_lock(&s->ops_mutex); if ((s->pcmcia_pfc) && @@ -374,13 +381,13 @@ static int pcmcia_device_remove(struct device *dev) if (p_dev->_irq || p_dev->_io || p_dev->_locked) dev_printk(KERN_INFO, dev, "pcmcia: driver %s did not release config properly\n", - p_drv->drv.name); + p_drv->name); for (i = 0; i < MAX_WIN; i++) if (p_dev->_win & CLIENT_WIN_REQ(i)) dev_printk(KERN_INFO, dev, "pcmcia: driver %s did not release window properly\n", - p_drv->drv.name); + p_drv->name); /* references from pcmcia_probe_device */ pcmcia_put_dev(p_dev); @@ -1136,7 +1143,7 @@ static int pcmcia_dev_suspend(struct device *dev, pm_message_t state) dev_printk(KERN_ERR, dev, "pcmcia: device %s (driver %s) did " "not want to go to sleep (%d)\n", - p_dev->devname, p_drv->drv.name, ret); + p_dev->devname, p_drv->name, ret); mutex_lock(&p_dev->socket->ops_mutex); p_dev->suspended = 0; mutex_unlock(&p_dev->socket->ops_mutex); @@ -1178,7 +1185,7 @@ static int pcmcia_dev_resume(struct device *dev) if (p_dev->device_no == p_dev->func) { dev_dbg(dev, "requesting configuration\n"); - ret = pcmcia_request_configuration(p_dev, &p_dev->conf); + ret = pcmcia_enable_device(p_dev); if (ret) goto out; } diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c index 05d0879ce935..fc7906eaf228 100644 --- a/drivers/pcmcia/i82092.c +++ b/drivers/pcmcia/i82092.c @@ -16,7 +16,6 @@ #include <linux/device.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <asm/system.h> #include <asm/io.h> diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index 61746bd598b3..72a033a2acdb 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -51,7 +51,6 @@ #include <asm/system.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <linux/isapnp.h> diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 24de49925863..2adb0106a039 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -27,7 +27,6 @@ #include <asm/system.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #undef MAX_IO_WIN /* FIXME */ #define MAX_IO_WIN 1 diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 8e4723844ad3..1511ff71c87b 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -28,7 +28,6 @@ #include <asm/addrspace.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> /* XXX: should be moved into asm/irq.h */ #define PCC0_IRQ 24 diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index f0ecad99ce81..99d4f23cb435 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -59,7 +59,6 @@ #include <asm/irq.h> #include <asm/fs_pd.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #define pcmcia_info(args...) printk(KERN_INFO "m8xx_pcmcia: "args) diff --git a/drivers/pcmcia/o2micro.h b/drivers/pcmcia/o2micro.h index e74bebac2695..5096e92c7a4c 100644 --- a/drivers/pcmcia/o2micro.h +++ b/drivers/pcmcia/o2micro.h @@ -153,14 +153,14 @@ static int o2micro_override(struct yenta_socket *socket) if (use_speedup) { dev_info(&socket->dev->dev, - "O2: enabling read prefetch/write burst\n"); + "O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'\n"); config_writeb(socket, O2_RESERVED1, a | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST); config_writeb(socket, O2_RESERVED2, b | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST); } else { dev_info(&socket->dev->dev, - "O2: disabling read prefetch/write burst\n"); + "O2: disabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=on'\n"); config_writeb(socket, O2_RESERVED1, a & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST)); config_writeb(socket, O2_RESERVED2, diff --git a/drivers/pcmcia/pcmcia_cis.c b/drivers/pcmcia/pcmcia_cis.c index 0ac54da15885..e2c92415b892 100644 --- a/drivers/pcmcia/pcmcia_cis.c +++ b/drivers/pcmcia/pcmcia_cis.c @@ -6,7 +6,7 @@ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. * * Copyright (C) 1999 David A. Hinds - * Copyright (C) 2004-2009 Dominik Brodowski + * Copyright (C) 2004-2010 Dominik Brodowski * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,7 +22,6 @@ #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/ds.h> #include "cs_internal.h" @@ -126,14 +125,24 @@ next_entry: return ret; } + +/** + * pcmcia_io_cfg_data_width() - convert cfgtable to data path width parameter + */ +static int pcmcia_io_cfg_data_width(unsigned int flags) +{ + if (!(flags & CISTPL_IO_8BIT)) + return IO_DATA_PATH_WIDTH_16; + if (!(flags & CISTPL_IO_16BIT)) + return IO_DATA_PATH_WIDTH_8; + return IO_DATA_PATH_WIDTH_AUTO; +} + + struct pcmcia_cfg_mem { struct pcmcia_device *p_dev; + int (*conf_check) (struct pcmcia_device *p_dev, void *priv_data); void *priv_data; - int (*conf_check) (struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data); cisparse_t parse; cistpl_cftable_entry_t dflt; }; @@ -147,25 +156,102 @@ struct pcmcia_cfg_mem { */ static int pcmcia_do_loop_config(tuple_t *tuple, cisparse_t *parse, void *priv) { - cistpl_cftable_entry_t *cfg = &parse->cftable_entry; struct pcmcia_cfg_mem *cfg_mem = priv; + struct pcmcia_device *p_dev = cfg_mem->p_dev; + cistpl_cftable_entry_t *cfg = &parse->cftable_entry; + cistpl_cftable_entry_t *dflt = &cfg_mem->dflt; + unsigned int flags = p_dev->config_flags; + unsigned int vcc = p_dev->socket->socket.Vcc; + + dev_dbg(&p_dev->dev, "testing configuration %x, autoconf %x\n", + cfg->index, flags); /* default values */ - cfg_mem->p_dev->conf.ConfigIndex = cfg->index; + cfg_mem->p_dev->config_index = cfg->index; if (cfg->flags & CISTPL_CFTABLE_DEFAULT) cfg_mem->dflt = *cfg; - return cfg_mem->conf_check(cfg_mem->p_dev, cfg, &cfg_mem->dflt, - cfg_mem->p_dev->socket->socket.Vcc, - cfg_mem->priv_data); + /* check for matching Vcc? */ + if (flags & CONF_AUTO_CHECK_VCC) { + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } + } + + /* set Vpp? */ + if (flags & CONF_AUTO_SET_VPP) { + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + } + + /* enable audio? */ + if ((flags & CONF_AUTO_AUDIO) && (cfg->flags & CISTPL_CFTABLE_AUDIO)) + p_dev->config_flags |= CONF_ENABLE_SPKR; + + + /* IO window settings? */ + if (flags & CONF_AUTO_SET_IO) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + int i = 0; + + p_dev->resource[0]->start = p_dev->resource[0]->end = 0; + p_dev->resource[1]->start = p_dev->resource[1]->end = 0; + if (io->nwin == 0) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + if (io->nwin > 1) { + /* For multifunction cards, by convention, we + * configure the network function with window 0, + * and serial with window 1 */ + i = (io->win[1].len > io->win[0].len); + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; + } + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + } + + /* MEM window settings? */ + if (flags & CONF_AUTO_SET_IOMEM) { + /* so far, we only set one memory window */ + cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + + p_dev->resource[2]->start = p_dev->resource[2]->end = 0; + if (mem->nwin == 0) + return -ENODEV; + + p_dev->resource[2]->start = mem->win[0].host_addr; + p_dev->resource[2]->end = mem->win[0].len; + if (p_dev->resource[2]->end < 0x1000) + p_dev->resource[2]->end = 0x1000; + p_dev->card_addr = mem->win[0].card_addr; + } + + dev_dbg(&p_dev->dev, + "checking configuration %x: %pr %pr %pr (%d lines)\n", + p_dev->config_index, p_dev->resource[0], p_dev->resource[1], + p_dev->resource[2], p_dev->io_lines); + + return cfg_mem->conf_check(p_dev, cfg_mem->priv_data); } /** * pcmcia_loop_config() - loop over configuration options * @p_dev: the struct pcmcia_device which we need to loop for. * @conf_check: function to call for each configuration option. - * It gets passed the struct pcmcia_device, the CIS data - * describing the configuration option, and private data + * It gets passed the struct pcmcia_device and private data * being passed to pcmcia_loop_config() * @priv_data: private data to be passed to the conf_check function. * @@ -175,9 +261,6 @@ static int pcmcia_do_loop_config(tuple_t *tuple, cisparse_t *parse, void *priv) */ int pcmcia_loop_config(struct pcmcia_device *p_dev, int (*conf_check) (struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data), void *priv_data) { diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 9ba4dade69a4..a9af0d784426 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -6,7 +6,7 @@ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. * * Copyright (C) 1999 David A. Hinds - * Copyright (C) 2004-2005 Dominik Brodowski + * Copyright (C) 2004-2010 Dominik Brodowski * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -26,7 +26,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -56,6 +55,12 @@ struct resource *pcmcia_find_mem_region(u_long base, u_long num, u_long align, } +/** + * release_io_space() - release IO ports allocated with alloc_io_space() + * @s: pcmcia socket + * @res: resource to release + * + */ static void release_io_space(struct pcmcia_socket *s, struct resource *res) { resource_size_t num = resource_size(res); @@ -81,9 +86,14 @@ static void release_io_space(struct pcmcia_socket *s, struct resource *res) } } } -} /* release_io_space */ +} + -/** alloc_io_space +/** + * alloc_io_space() - allocate IO ports for use by a PCMCIA device + * @s: pcmcia socket + * @res: resource to allocate (begin: begin, end: size) + * @lines: number of IO lines decoded by the PCMCIA card * * Special stuff for managing IO windows, because they are scarce */ @@ -135,7 +145,7 @@ static int alloc_io_space(struct pcmcia_socket *s, struct resource *res, } dev_dbg(&s->dev, "alloc_io_space request result %d: %pR\n", ret, res); return ret; -} /* alloc_io_space */ +} /** @@ -168,14 +178,14 @@ static int pcmcia_access_config(struct pcmcia_device *p_dev, return -EACCES; } - addr = (c->ConfigBase + where) >> 1; + addr = (p_dev->config_base + where) >> 1; ret = accessf(s, 1, addr, 1, val); mutex_unlock(&s->ops_mutex); return ret; -} /* pcmcia_access_config */ +} /** @@ -204,11 +214,20 @@ int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val) EXPORT_SYMBOL(pcmcia_write_config_byte); -int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh, +/** + * pcmcia_map_mem_page() - modify iomem window to point to a different offset + * @p_dev: pcmcia device + * @res: iomem resource already enabled by pcmcia_request_window() + * @offset: card_offset to map + * + * pcmcia_map_mem_page() modifies what can be read and written by accessing + * an iomem range previously enabled by pcmcia_request_window(), by setting + * the card_offset value to @offset. + */ +int pcmcia_map_mem_page(struct pcmcia_device *p_dev, struct resource *res, unsigned int offset) { struct pcmcia_socket *s = p_dev->socket; - struct resource *res = wh; unsigned int w; int ret; @@ -223,98 +242,111 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh, dev_warn(&p_dev->dev, "failed to set_mem_map\n"); mutex_unlock(&s->ops_mutex); return ret; -} /* pcmcia_map_mem_page */ +} EXPORT_SYMBOL(pcmcia_map_mem_page); -/** pcmcia_modify_configuration +/** + * pcmcia_fixup_iowidth() - reduce io width to 8bit + * @p_dev: pcmcia device * - * Modify a locked socket configuration + * pcmcia_fixup_iowidth() allows a PCMCIA device driver to reduce the + * IO width to 8bit after having called pcmcia_enable_device() + * previously. */ -int pcmcia_modify_configuration(struct pcmcia_device *p_dev, - modconf_t *mod) +int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev) { - struct pcmcia_socket *s; - config_t *c; - int ret; - - s = p_dev->socket; + struct pcmcia_socket *s = p_dev->socket; + pccard_io_map io_off = { 0, 0, 0, 0, 1 }; + pccard_io_map io_on; + int i, ret = 0; mutex_lock(&s->ops_mutex); - c = p_dev->function_config; - if (!(s->state & SOCKET_PRESENT)) { - dev_dbg(&p_dev->dev, "No card present\n"); - ret = -ENODEV; - goto unlock; - } - if (!(c->state & CONFIG_LOCKED)) { - dev_dbg(&p_dev->dev, "Configuration isnt't locked\n"); + dev_dbg(&p_dev->dev, "fixup iowidth to 8bit\n"); + + if (!(s->state & SOCKET_PRESENT) || + !(p_dev->function_config->state & CONFIG_LOCKED)) { + dev_dbg(&p_dev->dev, "No card? Config not locked?\n"); ret = -EACCES; goto unlock; } - if (mod->Attributes & (CONF_IRQ_CHANGE_VALID | CONF_VCC_CHANGE_VALID)) { - dev_dbg(&p_dev->dev, - "changing Vcc or IRQ is not allowed at this time\n"); - ret = -EINVAL; - goto unlock; - } + io_on.speed = io_speed; + for (i = 0; i < MAX_IO_WIN; i++) { + if (!s->io[i].res) + continue; + io_off.map = i; + io_on.map = i; - /* We only allow changing Vpp1 and Vpp2 to the same value */ - if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) && - (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { - if (mod->Vpp1 != mod->Vpp2) { - dev_dbg(&p_dev->dev, - "Vpp1 and Vpp2 must be the same\n"); - ret = -EINVAL; - goto unlock; - } - s->socket.Vpp = mod->Vpp1; - if (s->ops->set_socket(s, &s->socket)) { - dev_printk(KERN_WARNING, &p_dev->dev, - "Unable to set VPP\n"); - ret = -EIO; - goto unlock; - } - } else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) || - (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { - dev_dbg(&p_dev->dev, - "changing Vcc is not allowed at this time\n"); - ret = -EINVAL; - goto unlock; + io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8; + io_on.start = s->io[i].res->start; + io_on.stop = s->io[i].res->end; + + s->ops->set_io_map(s, &io_off); + mdelay(40); + s->ops->set_io_map(s, &io_on); } +unlock: + mutex_unlock(&s->ops_mutex); + + return ret; +} +EXPORT_SYMBOL(pcmcia_fixup_iowidth); + + +/** + * pcmcia_fixup_vpp() - set Vpp to a new voltage level + * @p_dev: pcmcia device + * @new_vpp: new Vpp voltage + * + * pcmcia_fixup_vpp() allows a PCMCIA device driver to set Vpp to + * a new voltage level between calls to pcmcia_enable_device() + * and pcmcia_disable_device(). + */ +int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp) +{ + struct pcmcia_socket *s = p_dev->socket; + int ret = 0; - if (mod->Attributes & CONF_IO_CHANGE_WIDTH) { - pccard_io_map io_off = { 0, 0, 0, 0, 1 }; - pccard_io_map io_on; - int i; + mutex_lock(&s->ops_mutex); - io_on.speed = io_speed; - for (i = 0; i < MAX_IO_WIN; i++) { - if (!s->io[i].res) - continue; - io_off.map = i; - io_on.map = i; + dev_dbg(&p_dev->dev, "fixup Vpp to %d\n", new_vpp); - io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8; - io_on.start = s->io[i].res->start; - io_on.stop = s->io[i].res->end; + if (!(s->state & SOCKET_PRESENT) || + !(p_dev->function_config->state & CONFIG_LOCKED)) { + dev_dbg(&p_dev->dev, "No card? Config not locked?\n"); + ret = -EACCES; + goto unlock; + } - s->ops->set_io_map(s, &io_off); - mdelay(40); - s->ops->set_io_map(s, &io_on); - } + s->socket.Vpp = new_vpp; + if (s->ops->set_socket(s, &s->socket)) { + dev_warn(&p_dev->dev, "Unable to set VPP\n"); + ret = -EIO; + goto unlock; } - ret = 0; + p_dev->vpp = new_vpp; + unlock: mutex_unlock(&s->ops_mutex); return ret; -} /* modify_configuration */ -EXPORT_SYMBOL(pcmcia_modify_configuration); +} +EXPORT_SYMBOL(pcmcia_fixup_vpp); +/** + * pcmcia_release_configuration() - physically disable a PCMCIA device + * @p_dev: pcmcia device + * + * pcmcia_release_configuration() is the 1:1 counterpart to + * pcmcia_enable_device(): If a PCMCIA device is no longer used by any + * driver, the Vpp voltage is set to 0, IRQs will no longer be generated, + * and I/O ranges will be disabled. As pcmcia_release_io() and + * pcmcia_release_window() still need to be called, device drivers are + * expected to call pcmcia_disable_device() instead. + */ int pcmcia_release_configuration(struct pcmcia_device *p_dev) { pccard_io_map io = { 0, 0, 0, 0, 1 }; @@ -327,7 +359,7 @@ int pcmcia_release_configuration(struct pcmcia_device *p_dev) if (p_dev->_locked) { p_dev->_locked = 0; if (--(s->lock_count) == 0) { - s->socket.flags = SS_OUTPUT_ENA; /* Is this correct? */ + s->socket.flags = SS_OUTPUT_ENA; /* Is this correct? */ s->socket.Vpp = 0; s->socket.io_irq = 0; s->ops->set_socket(s, &s->socket); @@ -349,16 +381,18 @@ int pcmcia_release_configuration(struct pcmcia_device *p_dev) mutex_unlock(&s->ops_mutex); return 0; -} /* pcmcia_release_configuration */ +} -/** pcmcia_release_io +/** + * pcmcia_release_io() - release I/O allocated by a PCMCIA device + * @p_dev: pcmcia device * - * Release_io() releases the I/O ranges allocated by a client. This - * may be invoked some time after a card ejection has already dumped - * the actual socket configuration, so if the client is "stale", we - * don't bother checking the port ranges against the current socket - * values. + * pcmcia_release_io() releases the I/O ranges allocated by a PCMCIA + * device. This may be invoked some time after a card ejection has + * already dumped the actual socket configuration, so if the client is + * "stale", we don't bother checking the port ranges against the + * current socket values. */ static int pcmcia_release_io(struct pcmcia_device *p_dev) { @@ -387,6 +421,14 @@ out: } /* pcmcia_release_io */ +/** + * pcmcia_release_window() - release reserved iomem for PCMCIA devices + * @p_dev: pcmcia device + * @res: iomem resource to release + * + * pcmcia_release_window() releases &struct resource *res which was + * previously reserved by calling pcmcia_request_window(). + */ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res) { struct pcmcia_socket *s = p_dev->socket; @@ -420,6 +462,8 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res) kfree(win->res); win->res = NULL; } + res->start = res->end = 0; + res->flags = IORESOURCE_MEM; p_dev->_win &= ~CLIENT_WIN_REQ(w); mutex_unlock(&s->ops_mutex); @@ -428,23 +472,30 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res) EXPORT_SYMBOL(pcmcia_release_window); -int pcmcia_request_configuration(struct pcmcia_device *p_dev, - config_req_t *req) +/** + * pcmcia_enable_device() - set up and activate a PCMCIA device + * @p_dev: the associated PCMCIA device + * + * pcmcia_enable_device() physically enables a PCMCIA device. It parses + * the flags passed to in @flags and stored in @p_dev->flags and sets up + * the Vpp voltage, enables the speaker line, I/O ports and store proper + * values to configuration registers. + */ +int pcmcia_enable_device(struct pcmcia_device *p_dev) { int i; - u_int base; + unsigned int base; struct pcmcia_socket *s = p_dev->socket; config_t *c; pccard_io_map iomap; + unsigned char status = 0; + unsigned char ext_status = 0; + unsigned char option = 0; + unsigned int flags = p_dev->config_flags; if (!(s->state & SOCKET_PRESENT)) return -ENODEV; - if (req->IntType & INT_CARDBUS) { - dev_dbg(&p_dev->dev, "IntType may not be INT_CARDBUS\n"); - return -EINVAL; - } - mutex_lock(&s->ops_mutex); c = p_dev->function_config; if (c->state & CONFIG_LOCKED) { @@ -454,7 +505,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, } /* Do power control. We don't allow changes in Vcc. */ - s->socket.Vpp = req->Vpp; + s->socket.Vpp = p_dev->vpp; if (s->ops->set_socket(s, &s->socket)) { mutex_unlock(&s->ops_mutex); dev_printk(KERN_WARNING, &p_dev->dev, @@ -463,64 +514,72 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, } /* Pick memory or I/O card, DMA mode, interrupt */ - c->IntType = req->IntType; - c->Attributes = req->Attributes; - if (req->IntType & INT_MEMORY_AND_IO) + if (p_dev->_io) s->socket.flags |= SS_IOCARD; - if (req->IntType & INT_ZOOMED_VIDEO) - s->socket.flags |= SS_ZVCARD | SS_IOCARD; - if (req->Attributes & CONF_ENABLE_DMA) - s->socket.flags |= SS_DMA_MODE; - if (req->Attributes & CONF_ENABLE_SPKR) + if (flags & CONF_ENABLE_SPKR) { s->socket.flags |= SS_SPKR_ENA; - if (req->Attributes & CONF_ENABLE_IRQ) + status = CCSR_AUDIO_ENA; + if (!(p_dev->config_regs & PRESENT_STATUS)) + dev_warn(&p_dev->dev, "speaker requested, but " + "PRESENT_STATUS not set!\n"); + } + if (flags & CONF_ENABLE_IRQ) s->socket.io_irq = s->pcmcia_irq; else s->socket.io_irq = 0; + if (flags & CONF_ENABLE_ESR) { + p_dev->config_regs |= PRESENT_EXT_STATUS; + ext_status = ESR_REQ_ATTN_ENA; + } s->ops->set_socket(s, &s->socket); s->lock_count++; + dev_dbg(&p_dev->dev, + "enable_device: V %d, flags %x, base %x, regs %x, idx %x\n", + p_dev->vpp, flags, p_dev->config_base, p_dev->config_regs, + p_dev->config_index); + /* Set up CIS configuration registers */ - base = c->ConfigBase = req->ConfigBase; - c->CardValues = req->Present; - if (req->Present & PRESENT_COPY) { - c->Copy = req->Copy; - pcmcia_write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &c->Copy); - } - if (req->Present & PRESENT_OPTION) { + base = p_dev->config_base; + if (p_dev->config_regs & PRESENT_COPY) { + u16 tmp = 0; + dev_dbg(&p_dev->dev, "clearing CISREG_SCR\n"); + pcmcia_write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &tmp); + } + if (p_dev->config_regs & PRESENT_PIN_REPLACE) { + u16 tmp = 0; + dev_dbg(&p_dev->dev, "clearing CISREG_PRR\n"); + pcmcia_write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &tmp); + } + if (p_dev->config_regs & PRESENT_OPTION) { if (s->functions == 1) { - c->Option = req->ConfigIndex & COR_CONFIG_MASK; + option = p_dev->config_index & COR_CONFIG_MASK; } else { - c->Option = req->ConfigIndex & COR_MFC_CONFIG_MASK; - c->Option |= COR_FUNC_ENA|COR_IREQ_ENA; - if (req->Present & PRESENT_IOBASE_0) - c->Option |= COR_ADDR_DECODE; + option = p_dev->config_index & COR_MFC_CONFIG_MASK; + option |= COR_FUNC_ENA|COR_IREQ_ENA; + if (p_dev->config_regs & PRESENT_IOBASE_0) + option |= COR_ADDR_DECODE; } - if ((req->Attributes & CONF_ENABLE_IRQ) && - !(req->Attributes & CONF_ENABLE_PULSE_IRQ)) - c->Option |= COR_LEVEL_REQ; - pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &c->Option); + if ((flags & CONF_ENABLE_IRQ) && + !(flags & CONF_ENABLE_PULSE_IRQ)) + option |= COR_LEVEL_REQ; + pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &option); mdelay(40); } - if (req->Present & PRESENT_STATUS) { - c->Status = req->Status; - pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &c->Status); - } - if (req->Present & PRESENT_PIN_REPLACE) { - c->Pin = req->Pin; - pcmcia_write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &c->Pin); - } - if (req->Present & PRESENT_EXT_STATUS) { - c->ExtStatus = req->ExtStatus; - pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, &c->ExtStatus); - } - if (req->Present & PRESENT_IOBASE_0) { + if (p_dev->config_regs & PRESENT_STATUS) + pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &status); + + if (p_dev->config_regs & PRESENT_EXT_STATUS) + pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, + &ext_status); + + if (p_dev->config_regs & PRESENT_IOBASE_0) { u8 b = c->io[0].start & 0xff; pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b); b = (c->io[0].start >> 8) & 0xff; pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_1)>>1, 1, &b); } - if (req->Present & PRESENT_IOSIZE) { + if (p_dev->config_regs & PRESENT_IOSIZE) { u8 b = resource_size(&c->io[0]) + resource_size(&c->io[1]) - 1; pcmcia_write_cis_mem(s, 1, (base + CISREG_IOSIZE)>>1, 1, &b); } @@ -551,14 +610,15 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, p_dev->_locked = 1; mutex_unlock(&s->ops_mutex); return 0; -} /* pcmcia_request_configuration */ -EXPORT_SYMBOL(pcmcia_request_configuration); +} /* pcmcia_enable_device */ +EXPORT_SYMBOL(pcmcia_enable_device); /** * pcmcia_request_io() - attempt to reserve port ranges for PCMCIA devices + * @p_dev: the associated PCMCIA device * - * pcmcia_request_io() attepts to reserve the IO port ranges specified in + * pcmcia_request_io() attempts to reserve the IO port ranges specified in * &struct pcmcia_device @p_dev->resource[0] and @p_dev->resource[1]. The * "start" value is the requested start of the IO port resource; "end" * reflects the number of ports requested. The number of IO lines requested @@ -622,11 +682,13 @@ EXPORT_SYMBOL(pcmcia_request_io); /** * pcmcia_request_irq() - attempt to request a IRQ for a PCMCIA device + * @p_dev: the associated PCMCIA device + * @handler: IRQ handler to register * - * pcmcia_request_irq() is a wrapper around request_irq which will allow + * pcmcia_request_irq() is a wrapper around request_irq() which allows * the PCMCIA core to clean up the registration in pcmcia_disable_device(). * Drivers are free to use request_irq() directly, but then they need to - * call free_irq themselfves, too. Also, only IRQF_SHARED capable IRQ + * call free_irq() themselfves, too. Also, only %IRQF_SHARED capable IRQ * handlers are allowed. */ int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev, @@ -649,12 +711,14 @@ EXPORT_SYMBOL(pcmcia_request_irq); /** * pcmcia_request_exclusive_irq() - attempt to request an exclusive IRQ first + * @p_dev: the associated PCMCIA device + * @handler: IRQ handler to register * - * pcmcia_request_exclusive_irq() is a wrapper around request_irq which + * pcmcia_request_exclusive_irq() is a wrapper around request_irq() which * attempts first to request an exclusive IRQ. If it fails, it also accepts * a shared IRQ, but prints out a warning. PCMCIA drivers should allow for * IRQ sharing and either use request_irq directly (then they need to call - * free_irq themselves, too), or the pcmcia_request_irq() function. + * free_irq() themselves, too), or the pcmcia_request_irq() function. */ int __must_check __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, @@ -795,38 +859,47 @@ int pcmcia_setup_irq(struct pcmcia_device *p_dev) } -/** pcmcia_request_window +/** + * pcmcia_request_window() - attempt to reserve iomem for PCMCIA devices + * @p_dev: the associated PCMCIA device + * @res: &struct resource pointing to p_dev->resource[2..5] + * @speed: access speed * - * Request_window() establishes a mapping between card memory space - * and system memory space. + * pcmcia_request_window() attepts to reserve an iomem ranges specified in + * &struct resource @res pointing to one of the entries in + * &struct pcmcia_device @p_dev->resource[2..5]. The "start" value is the + * requested start of the IO mem resource; "end" reflects the size + * requested. */ -int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_handle_t *wh) +int pcmcia_request_window(struct pcmcia_device *p_dev, struct resource *res, + unsigned int speed) { struct pcmcia_socket *s = p_dev->socket; pccard_mem_map *win; u_long align; - struct resource *res; int w; + dev_dbg(&p_dev->dev, "request_window %pR %d\n", res, speed); + if (!(s->state & SOCKET_PRESENT)) { dev_dbg(&p_dev->dev, "No card present\n"); return -ENODEV; } /* Window size defaults to smallest available */ - if (req->Size == 0) - req->Size = s->map_size; - align = (s->features & SS_CAP_MEM_ALIGN) ? req->Size : s->map_size; - if (req->Size & (s->map_size-1)) { + if (res->end == 0) + res->end = s->map_size; + align = (s->features & SS_CAP_MEM_ALIGN) ? res->end : s->map_size; + if (res->end & (s->map_size-1)) { dev_dbg(&p_dev->dev, "invalid map size\n"); return -EINVAL; } - if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) || - (req->Base & (align-1))) { + if ((res->start && (s->features & SS_CAP_STATIC_MAP)) || + (res->start & (align-1))) { dev_dbg(&p_dev->dev, "invalid base address\n"); return -EINVAL; } - if (req->Base) + if (res->start) align = 0; /* Allocate system memory window */ @@ -843,7 +916,7 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha win = &s->win[w]; if (!(s->features & SS_CAP_STATIC_MAP)) { - win->res = pcmcia_find_mem_region(req->Base, req->Size, align, + win->res = pcmcia_find_mem_region(res->start, res->end, align, 0, s); if (!win->res) { dev_dbg(&p_dev->dev, "allocating mem region failed\n"); @@ -855,8 +928,8 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha /* Configure the socket controller */ win->map = w+1; - win->flags = req->Attributes; - win->speed = req->AccessSpeed; + win->flags = res->flags & WIN_FLAGS_MAP; + win->speed = speed; win->card_start = 0; if (s->ops->set_mem_map(s, win) != 0) { @@ -868,17 +941,14 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha /* Return window handle */ if (s->features & SS_CAP_STATIC_MAP) - req->Base = win->static_start; + res->start = win->static_start; else - req->Base = win->res->start; + res->start = win->res->start; /* convert to new-style resources */ - res = p_dev->resource[w + MAX_IO_WIN]; - res->start = req->Base; - res->end = req->Base + req->Size - 1; - res->flags &= ~IORESOURCE_BITS; - res->flags |= (req->Attributes & WIN_FLAGS_MAP) | (win->map << 2); - res->flags |= IORESOURCE_MEM; + res->end += res->start - 1; + res->flags &= ~WIN_FLAGS_REQ; + res->flags |= (win->map << 2) | IORESOURCE_MEM; res->parent = win->res; if (win->res) request_resource(&iomem_resource, res); @@ -886,15 +956,30 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha dev_dbg(&p_dev->dev, "request_window results in %pR\n", res); mutex_unlock(&s->ops_mutex); - *wh = res; return 0; } /* pcmcia_request_window */ EXPORT_SYMBOL(pcmcia_request_window); + +/** + * pcmcia_disable_device() - disable and clean up a PCMCIA device + * @p_dev: the associated PCMCIA device + * + * pcmcia_disable_device() is the driver-callable counterpart to + * pcmcia_enable_device(): If a PCMCIA device is no longer used, + * drivers are expected to clean up and disable the device by calling + * this function. Any I/O ranges (iomem and ioports) will be released, + * the Vpp voltage will be set to 0, and IRQs will no longer be + * generated -- at least if there is no other card function (of + * multifunction devices) being used. + */ void pcmcia_disable_device(struct pcmcia_device *p_dev) { int i; + + dev_dbg(&p_dev->dev, "disabling device\n"); + for (i = 0; i < MAX_WIN; i++) { struct resource *res = p_dev->resource[MAX_IO_WIN + i]; if (res->flags & WIN_FLAGS_REQ) diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index deef6656ab7b..8cbfa067171f 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -18,7 +18,6 @@ #include <linux/io.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <asm/system.h> diff --git a/drivers/pcmcia/rsrc_iodyn.c b/drivers/pcmcia/rsrc_iodyn.c index 8510c35d2952..523eb691c30b 100644 --- a/drivers/pcmcia/rsrc_iodyn.c +++ b/drivers/pcmcia/rsrc_iodyn.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c index 4e80421fd908..aa628ed0e9f4 100644 --- a/drivers/pcmcia/rsrc_mgr.c +++ b/drivers/pcmcia/rsrc_mgr.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 96f348b35fde..b187555d4388 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -29,7 +29,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index e09851480295..945857f8c284 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -35,7 +35,6 @@ #include <linux/slab.h> #include <linux/platform_device.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <asm/hardware/scoop.h> diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 6f1a86b43c60..689e3c02edb8 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -627,8 +627,6 @@ void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt) pcmcia_unregister_socket(&skt->socket); - flush_scheduled_work(); - skt->ops->hw_shutdown(skt); soc_common_pcmcia_config_skt(skt, &dead_socket); @@ -720,8 +718,6 @@ int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt) pcmcia_unregister_socket(&skt->socket); out_err_7: - flush_scheduled_work(); - skt->ops->hw_shutdown(skt); out_err_6: list_del(&skt->node); diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h index 3fba3a679128..bbcd5385a221 100644 --- a/drivers/pcmcia/soc_common.h +++ b/drivers/pcmcia/soc_common.h @@ -11,7 +11,6 @@ /* include the world */ #include <linux/cpufreq.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index cb0d3ace18bd..71aeed93037c 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -27,7 +27,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index be0d841c7ebd..310160bffe38 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -49,7 +49,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include "tcic.h" diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c index 9b3c15827e5c..c6d36b3a6ce8 100644 --- a/drivers/pcmcia/vrc4173_cardu.c +++ b/drivers/pcmcia/vrc4173_cardu.c @@ -461,7 +461,7 @@ static int __devinit vrc4173_cardu_probe(struct pci_dev *dev, { vrc4173_socket_t *socket; unsigned long start, len, flags; - int slot, err; + int slot, err, ret; slot = vrc4173_cardu_slots++; socket = &cardu_sockets[slot]; @@ -474,43 +474,63 @@ static int __devinit vrc4173_cardu_probe(struct pci_dev *dev, return err; start = pci_resource_start(dev, 0); - if (start == 0) - return -ENODEV; + if (start == 0) { + ret = -ENODEV; + goto disable; + } len = pci_resource_len(dev, 0); - if (len == 0) - return -ENODEV; + if (len == 0) { + ret = -ENODEV; + goto disable; + } - if (((flags = pci_resource_flags(dev, 0)) & IORESOURCE_MEM) == 0) - return -EBUSY; + flags = pci_resource_flags(dev, 0); + if ((flags & IORESOURCE_MEM) == 0) { + ret = -EBUSY; + goto disable; + } - if ((err = pci_request_regions(dev, socket->name)) < 0) - return err; + err = pci_request_regions(dev, socket->name); + if (err < 0) { + ret = err; + goto disable; + } socket->base = ioremap(start, len); - if (socket->base == NULL) - return -ENODEV; + if (socket->base == NULL) { + ret = -ENODEV; + goto release; + } socket->dev = dev; socket->pcmcia_socket = pcmcia_register_socket(slot, &cardu_operations, 1); if (socket->pcmcia_socket == NULL) { - iounmap(socket->base); - socket->base = NULL; - return -ENOMEM; + ret = -ENOMEM; + goto unmap; } if (request_irq(dev->irq, cardu_interrupt, IRQF_SHARED, socket->name, socket) < 0) { - pcmcia_unregister_socket(socket->pcmcia_socket); - socket->pcmcia_socket = NULL; - iounmap(socket->base); - socket->base = NULL; - return -EBUSY; + ret = -EBUSY; + goto unregister; } printk(KERN_INFO "%s at %#08lx, IRQ %d\n", socket->name, start, dev->irq); return 0; + +unregister: + pcmcia_unregister_socket(socket->pcmcia_socket); + socket->pcmcia_socket = NULL; +unmap: + iounmap(socket->base); + socket->base = NULL; +release: + pci_release_regions(dev); +disable: + pci_disable_device(dev); + return ret; } static int __devinit vrc4173_cardu_setup(char *options) diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c index fa88c360c37a..3b67a1b6a197 100644 --- a/drivers/pcmcia/xxs1500_ss.c +++ b/drivers/pcmcia/xxs1500_ss.c @@ -17,7 +17,6 @@ #include <linux/slab.h> #include <linux/spinlock.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 414d9a6f9a32..408dbaa080a1 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -20,7 +20,6 @@ #include <linux/slab.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include "yenta_socket.h" #include "i82365.h" diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index f6d72e1f2a38..5707a80b96b6 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -468,7 +468,7 @@ sclp_sync_wait(void) cr0_sync &= 0xffff00a0; cr0_sync |= 0x00000200; __ctl_load(cr0_sync, 0, 0); - __raw_local_irq_stosm(0x01); + __arch_local_irq_stosm(0x01); /* Loop until driver state indicates finished request */ while (sclp_running_state != sclp_running_state_idle) { /* Check for expired request timer */ diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 61f49bdcc0c2..e77dd02eccdd 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -49,7 +49,6 @@ #include <scsi/scsi_host.h> #include "aha152x.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -86,8 +85,6 @@ static void aha152x_release_cs(struct pcmcia_device *link); static void aha152x_detach(struct pcmcia_device *p_dev); static int aha152x_config_cs(struct pcmcia_device *link); -static struct pcmcia_device *dev_list; - static int aha152x_probe(struct pcmcia_device *link) { scsi_info_t *info; @@ -100,11 +97,8 @@ static int aha152x_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->end = 0x20; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + link->config_regs = PRESENT_OPTION; return aha152x_config_cs(link); } /* aha152x_attach */ @@ -123,25 +117,24 @@ static void aha152x_detach(struct pcmcia_device *link) /*====================================================================*/ -static int aha152x_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int aha152x_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; + /* For New Media T&J, look for a SCSI window */ - if (cfg->io.win[0].len >= 0x20) - p_dev->resource[0]->start = cfg->io.win[0].base; - else if ((cfg->io.nwin > 1) && - (cfg->io.win[1].len >= 0x20)) - p_dev->resource[0]->start = cfg->io.win[1].base; - if ((cfg->io.nwin > 0) && - (p_dev->resource[0]->start < 0xffff)) { - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -EINVAL; + if ((p_dev->resource[0]->end < 0x20) && + (p_dev->resource[1]->end >= 0x20)) + p_dev->resource[0]->start = p_dev->resource[1]->start; + + if (p_dev->resource[0]->start >= 0xffff) + return -EINVAL; + + p_dev->resource[1]->start = p_dev->resource[1]->end = 0; + p_dev->resource[0]->end = 0x20; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + + return pcmcia_request_io(p_dev); } static int aha152x_config_cs(struct pcmcia_device *link) @@ -160,7 +153,7 @@ static int aha152x_config_cs(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -221,9 +214,7 @@ MODULE_DEVICE_TABLE(pcmcia, aha152x_ids); static struct pcmcia_driver aha152x_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "aha152x_cs", - }, + .name = "aha152x_cs", .probe = aha152x_probe, .remove = aha152x_detach, .id_table = aha152x_ids, @@ -238,7 +229,6 @@ static int __init init_aha152x_cs(void) static void __exit exit_aha152x_cs(void) { pcmcia_unregister_driver(&aha152x_cs_driver); - BUG_ON(dev_list != NULL); } module_init(init_aha152x_cs); diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 13dbe5c48492..cd69c2670f81 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -46,7 +46,6 @@ #include <scsi/scsi_host.h> #include "fdomain.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -83,11 +82,8 @@ static int fdomain_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->end = 0x10; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + link->config_regs = PRESENT_OPTION; return fdomain_config(link); } /* fdomain_attach */ @@ -105,14 +101,12 @@ static void fdomain_detach(struct pcmcia_device *link) /*====================================================================*/ -static int fdomain_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int fdomain_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; - p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = 0x10; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; return pcmcia_request_io(p_dev); } @@ -132,7 +126,7 @@ static int fdomain_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -194,9 +188,7 @@ MODULE_DEVICE_TABLE(pcmcia, fdomain_ids); static struct pcmcia_driver fdomain_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "fdomain_cs", - }, + .name = "fdomain_cs", .probe = fdomain_probe, .remove = fdomain_detach, .id_table = fdomain_ids, diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index dd9b40306f3d..9326c2c14880 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -47,7 +47,6 @@ #include <scsi/scsi.h> #include <scsi/scsi_ioctl.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -1531,15 +1530,6 @@ static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt) PCMCIA functions **********************************************************************/ -/*====================================================================== - nsp_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. -======================================================================*/ static int nsp_cs_probe(struct pcmcia_device *link) { scsi_info_t *info; @@ -1557,14 +1547,6 @@ static int nsp_cs_probe(struct pcmcia_device *link) nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info); - /* The io structure describes IO port mapping */ - link->resource[0]->end = 0x10; - link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO; - - /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - ret = nsp_cs_config(link); nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link); @@ -1572,12 +1554,6 @@ static int nsp_cs_probe(struct pcmcia_device *link) } /* nsp_cs_attach */ -/*====================================================================== - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. -======================================================================*/ static void nsp_cs_detach(struct pcmcia_device *link) { nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link); @@ -1590,98 +1566,36 @@ static void nsp_cs_detach(struct pcmcia_device *link) } /* nsp_cs_detach */ -/*====================================================================== - nsp_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -======================================================================*/ - -struct nsp_cs_configdata { - nsp_hw_data *data; - win_req_t req; -}; - -static int nsp_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int nsp_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - struct nsp_cs_configdata *cfg_mem = priv_data; + nsp_hw_data *data = priv_data; - if (cfg->index == 0) + if (p_dev->config_index == 0) return -ENODEV; - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - } else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - } - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = - p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - - if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; - cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; - cfg_mem->req.Attributes |= WIN_ENABLE; - cfg_mem->req.Base = mem->win[0].host_addr; - cfg_mem->req.Size = mem->win[0].len; - if (cfg_mem->req.Size < 0x1000) - cfg_mem->req.Size = 0x1000; - cfg_mem->req.AccessSpeed = 0; - if (pcmcia_request_window(p_dev, &cfg_mem->req, &p_dev->win) != 0) - goto next_entry; - if (pcmcia_map_mem_page(p_dev, p_dev->win, - mem->win[0].card_addr) != 0) - goto next_entry; - - cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size); - cfg_mem->data->MmioLength = cfg_mem->req.Size; - } - /* If we got this far, we're cool! */ - return 0; + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev) != 0) + goto next_entry; + + if (resource_size(p_dev->resource[2])) { + p_dev->resource[2]->flags |= (WIN_DATA_WIDTH_16 | + WIN_MEMORY_TYPE_CM | + WIN_ENABLE); + if (p_dev->resource[2]->end < 0x1000) + p_dev->resource[2]->end = 0x1000; + if (pcmcia_request_window(p_dev, p_dev->resource[2], 0) != 0) + goto next_entry; + if (pcmcia_map_mem_page(p_dev, p_dev->resource[2], + p_dev->card_addr) != 0) + goto next_entry; + + data->MmioAddress = (unsigned long) + ioremap_nocache(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); + data->MmioLength = resource_size(p_dev->resource[2]); } + /* If we got this far, we're cool! */ + return 0; next_entry: nsp_dbg(NSP_DEBUG_INIT, "next"); @@ -1693,25 +1607,23 @@ static int nsp_cs_config(struct pcmcia_device *link) { int ret; scsi_info_t *info = link->priv; - struct nsp_cs_configdata *cfg_mem; struct Scsi_Host *host; nsp_hw_data *data = &nsp_data_base; nsp_dbg(NSP_DEBUG_INIT, "in"); - cfg_mem = kzalloc(sizeof(*cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -ENOMEM; - cfg_mem->data = data; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IOMEM | + CONF_AUTO_SET_IO; - ret = pcmcia_loop_config(link, nsp_cs_config_check, cfg_mem); + ret = pcmcia_loop_config(link, nsp_cs_config_check, data); if (ret) goto cs_failed; if (pcmcia_request_irq(link, nspintr)) goto cs_failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto cs_failed; @@ -1754,41 +1666,16 @@ static int nsp_cs_config(struct pcmcia_device *link) info->host = host; - /* Finally, report what we've done */ - printk(KERN_INFO "nsp_cs: index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Vpp) { - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - } - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - printk(", irq %d", link->irq); - } - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - if (link->win) - printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base, - cfg_mem->req.Base+cfg_mem->req.Size-1); - printk("\n"); - - kfree(cfg_mem); return 0; cs_failed: nsp_dbg(NSP_DEBUG_INIT, "config fail"); nsp_cs_release(link); - kfree(cfg_mem); return -ENODEV; } /* nsp_cs_config */ -/*====================================================================== - After a card is removed, nsp_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -======================================================================*/ static void nsp_cs_release(struct pcmcia_device *link) { scsi_info_t *info = link->priv; @@ -1807,7 +1694,7 @@ static void nsp_cs_release(struct pcmcia_device *link) scsi_remove_host(info->host); } - if (link->win) { + if (resource_size(link->resource[2])) { if (data != NULL) { iounmap((void *)(data->MmioAddress)); } @@ -1877,9 +1764,7 @@ MODULE_DEVICE_TABLE(pcmcia, nsp_cs_ids); static struct pcmcia_driver nsp_driver = { .owner = THIS_MODULE, - .drv = { - .name = "nsp_cs", - }, + .name = "nsp_cs", .probe = nsp_cs_probe, .remove = nsp_cs_detach, .id_table = nsp_cs_ids, @@ -1889,14 +1774,11 @@ static struct pcmcia_driver nsp_driver = { static int __init nsp_cs_init(void) { - nsp_msg(KERN_INFO, "loading..."); - return pcmcia_register_driver(&nsp_driver); } static void __exit nsp_cs_exit(void) { - nsp_msg(KERN_INFO, "unloading..."); pcmcia_unregister_driver(&nsp_driver); } diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index eb775f1a523c..9c96ca889ec9 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -48,7 +48,6 @@ #include <scsi/scsi_host.h> #include "../qlogicfas408.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/ciscode.h> @@ -156,11 +155,8 @@ static int qlogic_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + link->config_regs = PRESENT_OPTION; return qlogic_config(link); } /* qlogic_attach */ @@ -178,15 +174,11 @@ static void qlogic_detach(struct pcmcia_device *link) /*====================================================================*/ -static int qlogic_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int qlogic_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; if (p_dev->resource[0]->start == 0) return -ENODEV; @@ -209,7 +201,7 @@ static int qlogic_config(struct pcmcia_device * link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -264,7 +256,7 @@ static int qlogic_resume(struct pcmcia_device *link) { scsi_info_t *info = link->priv; - pcmcia_request_configuration(link, &link->conf); + pcmcia_enable_device(link); if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { @@ -302,9 +294,7 @@ MODULE_DEVICE_TABLE(pcmcia, qlogic_ids); static struct pcmcia_driver qlogic_cs_driver = { .owner = THIS_MODULE, - .drv = { .name = "qlogic_cs", - }, .probe = qlogic_probe, .remove = qlogic_detach, .id_table = qlogic_ids, diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 321e390c9120..0ae27cb5cd6f 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -71,7 +71,6 @@ #include <scsi/scsi.h> #include <scsi/scsi_host.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/ciscode.h> @@ -684,15 +683,11 @@ static struct scsi_host_template sym53c500_driver_template = { .shost_attrs = SYM53C500_shost_attrs }; -static int SYM53C500_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int SYM53C500_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; if (p_dev->resource[0]->start == 0) return -ENODEV; @@ -721,7 +716,7 @@ SYM53C500_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -859,10 +854,7 @@ SYM53C500_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return SYM53C500_config(link); } /* SYM53C500_attach */ @@ -881,9 +873,7 @@ MODULE_DEVICE_TABLE(pcmcia, sym53c500_ids); static struct pcmcia_driver sym53c500_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "sym53c500_cs", - }, + .name = "sym53c500_cs", .probe = SYM53C500_probe, .remove = SYM53C500_detach, .id_table = sym53c500_ids, diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 12900f7083b0..3198c5335f0b 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -458,6 +458,7 @@ config SERIAL_SAMSUNG_UARTS int depends on ARM && PLAT_SAMSUNG default 2 if ARCH_S3C2400 + default 6 if ARCH_S5P6450 default 4 if SERIAL_SAMSUNG_UARTS_4 default 3 help @@ -526,12 +527,12 @@ config SERIAL_S3C24A0 Serial port support for the Samsung S3C24A0 SoC config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100) + tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) select SERIAL_SAMSUNG_UARTS_4 default y help - Serial port support for the Samsung S3C6400, S3C6410, S5P6440 + Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 and S5PC100 SoCs config SERIAL_S5PV210 diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 800c54602339..ee43efc7bdcc 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -2017,6 +2017,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) struct ioc3_port *port; struct ioc3_port *ports[PORTS_PER_CARD]; int phys_port; + int cnt; DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd)); @@ -2147,6 +2148,9 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) /* error exits that give back resources */ out4: + for (cnt = 0; cnt < phys_port; cnt++) + kfree(ports[cnt]); + kfree(card_ptr); return ret; } diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index b1156ba8ad14..7ac2bf5167cd 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -1101,7 +1101,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); port->mapbase = res->start; - port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000); + port->membase = S3C_VA_UART + (res->start & 0xfffff); ret = platform_get_irq(platdev, 0); if (ret < 0) port->irq = 0; diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 7d475b2a79e8..93760b2ea172 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -45,7 +45,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -183,10 +182,8 @@ static void quirk_config_socket(struct pcmcia_device *link) { struct serial_info *info = link->priv; - if (info->multi) { - link->conf.Present |= PRESENT_EXT_STATUS; - link->conf.ExtStatus = ESR_REQ_ATTN_ENA; - } + if (info->multi) + link->config_flags |= CONF_ENABLE_ESR; } static const struct serial_quirk quirks[] = { @@ -265,13 +262,6 @@ static const struct serial_quirk quirks[] = { static int serial_config(struct pcmcia_device * link); -/*====================================================================== - - After a card is removed, serial_remove() will unregister - the serial device(s), and release the PCMCIA configuration. - -======================================================================*/ - static void serial_remove(struct pcmcia_device *link) { struct serial_info *info = link->priv; @@ -314,14 +304,6 @@ static int serial_resume(struct pcmcia_device *link) return 0; } -/*====================================================================== - - serial_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int serial_probe(struct pcmcia_device *link) { struct serial_info *info; @@ -335,25 +317,13 @@ static int serial_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->conf.Attributes = CONF_ENABLE_IRQ; - if (do_sound) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; return serial_config(link); } -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void serial_detach(struct pcmcia_device *link) { struct serial_info *info = link->priv; @@ -361,11 +331,6 @@ static void serial_detach(struct pcmcia_device *link) dev_dbg(&link->dev, "serial_detach\n"); /* - * Ensure any outstanding scheduled tasks are completed. - */ - flush_scheduled_work(); - - /* * Ensure that the ports have been released. */ serial_remove(link); @@ -430,47 +395,45 @@ static int pfc_config(struct pcmcia_device *p_dev) return -ENODEV; } -static int simple_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) { static const int size_table[2] = { 8, 16 }; int *try = priv_data; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + if (p_dev->resource[0]->start == 0) + return -ENODEV; - p_dev->io_lines = ((*try & 0x1) == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if ((*try & 0x1) == 0) + p_dev->io_lines = 16; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) - && (cf->io.win[0].base != 0)) { - p_dev->resource[0]->start = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -EINVAL; + if (p_dev->resource[0]->end != size_table[(*try >> 1)]) + return -ENODEV; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int simple_config_check_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; int j; - if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } @@ -480,11 +443,9 @@ static int simple_config(struct pcmcia_device *link) struct serial_info *info = link->priv; int i = -ENODEV, try; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - /* First pass: look for a config entry that looks normal. * Two tries: without IO aliases, then with aliases */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO; for (try = 0; try < 4; try++) if (!pcmcia_loop_config(link, simple_config_check, &try)) goto found_port; @@ -500,7 +461,7 @@ static int simple_config(struct pcmcia_device *link) found_port: if (info->multi && (info->manfid == MANFID_3COM)) - link->conf.ConfigIndex &= ~(0x08); + link->config_index &= ~(0x08); /* * Apply any configuration quirks. @@ -508,51 +469,50 @@ found_port: if (info->quirk && info->quirk->config) info->quirk->config(link); - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) return -1; return setup_serial(link, info, link->resource[0]->start, link->irq); } -static int multi_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) { - int *base2 = priv_data; + int *multi = priv_data; + + if (p_dev->resource[1]->end) + return -EINVAL; /* The quad port cards have bad CIS's, so just look for a window larger than 8 ports and assume it will be right */ - if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev)) { - *base2 = p_dev->resource[0]->start + 8; - return 0; - } - } - return -ENODEV; + if (p_dev->resource[0]->end <= 8) + return -EINVAL; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = *multi * 8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + return 0; } static int multi_config_check_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { int *base2 = priv_data; - if (cf->io.nwin == 2) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[1]->start = cf->io.win[1].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev)) { - *base2 = p_dev->resource[1]->start; - return 0; - } - } - return -ENODEV; + if (!p_dev->resource[0]->end || !p_dev->resource[1]->end) + return -ENODEV; + + p_dev->resource[0]->end = p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + + *base2 = p_dev->resource[0]->start + 8; + return 0; } static int multi_config(struct pcmcia_device *link) @@ -560,12 +520,12 @@ static int multi_config(struct pcmcia_device *link) struct serial_info *info = link->priv; int i, base2 = 0; + link->config_flags |= CONF_AUTO_SET_IO; /* First, look for a generic full-sized window */ - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = info->multi * 8; - if (pcmcia_loop_config(link, multi_config_check, &base2)) { + if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) + base2 = link->resource[0]->start + 8; + else { /* If that didn't work, look for two windows */ - link->resource[0]->end = link->resource[1]->end = 8; info->multi = 2; if (pcmcia_loop_config(link, multi_config_check_notpicky, &base2)) { @@ -584,7 +544,7 @@ static int multi_config(struct pcmcia_device *link) if (info->quirk && info->quirk->config) info->quirk->config(link); - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) return -ENODEV; @@ -596,11 +556,11 @@ static int multi_config(struct pcmcia_device *link) info->prodid == PRODID_POSSIO_GCC)) { int err; - if (link->conf.ConfigIndex == 1 || - link->conf.ConfigIndex == 3) { + if (link->config_index == 1 || + link->config_index == 3) { err = setup_serial(link, info, base2, link->irq); - base2 = link->resource[0]->start;; + base2 = link->resource[0]->start; } else { err = setup_serial(link, info, link->resource[0]->start, link->irq); @@ -624,33 +584,24 @@ static int multi_config(struct pcmcia_device *link) return 0; } -static int serial_check_for_multi(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) { struct serial_info *info = p_dev->priv; - if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) - info->multi = cf->io.win[0].len >> 3; + if (!p_dev->resource[0]->end) + return -EINVAL; + + if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) + info->multi = p_dev->resource[0]->end >> 3; - if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && - (cf->io.win[1].len == 8)) + if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) + && (p_dev->resource[1]->end == 8)) info->multi = 2; return 0; /* break */ } -/*====================================================================== - - serial_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - serial device available to the system. - -======================================================================*/ - static int serial_config(struct pcmcia_device * link) { struct serial_info *info = link->priv; @@ -894,9 +845,7 @@ MODULE_FIRMWARE("cis/RS-COM-2P.cis"); static struct pcmcia_driver serial_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "serial_cs", - }, + .name = "serial_cs", .probe = serial_probe, .remove = serial_detach, .id_table = serial_ids, diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 91c2f4f3af10..4b9eec68fad6 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -143,10 +143,26 @@ config SPI_GPIO GPIO operations, you should be able to leverage that for better speed with a custom version of this driver; see the source code. +config SPI_IMX_VER_IMX1 + def_bool y if SOC_IMX1 + +config SPI_IMX_VER_0_0 + def_bool y if SOC_IMX21 || SOC_IMX27 + +config SPI_IMX_VER_0_4 + def_bool y if ARCH_MX31 + +config SPI_IMX_VER_0_7 + def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51 + +config SPI_IMX_VER_2_3 + def_bool y if ARCH_MX51 + config SPI_IMX tristate "Freescale i.MX SPI controllers" depends on ARCH_MXC select SPI_BITBANG + default m if IMX_HAVE_PLATFORM_SPI_IMX help This enables using the Freescale i.MX SPI controllers in master mode. @@ -182,12 +198,27 @@ config SPI_MPC512x_PSC This enables using the Freescale MPC5121 Programmable Serial Controller in SPI master mode. -config SPI_MPC8xxx - tristate "Freescale MPC8xxx SPI controller" +config SPI_FSL_LIB + tristate + depends on FSL_SOC + +config SPI_FSL_SPI + tristate "Freescale SPI controller" depends on FSL_SOC + select SPI_FSL_LIB help - This enables using the Freescale MPC8xxx SPI controllers in master - mode. + This enables using the Freescale SPI controllers in master mode. + MPC83xx platform uses the controller in cpu mode or CPM/QE mode. + MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. + +config SPI_FSL_ESPI + tristate "Freescale eSPI controller" + depends on FSL_SOC + select SPI_FSL_LIB + help + This enables using the Freescale eSPI controllers in master mode. + From MPC8536, 85xx platform uses the controller, and all P10xx, + P20xx, P30xx,P40xx, P50xx uses this controller. config SPI_OMAP_UWIRE tristate "OMAP1 MicroWire" @@ -298,6 +329,13 @@ config SPI_STMP3XXX help SPI driver for Freescale STMP37xx/378x SoC SSP interface +config SPI_TOPCLIFF_PCH + tristate "Topcliff PCH SPI Controller" + depends on PCI + help + SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus + used in some x86 embedded processors. + config SPI_TXX9 tristate "Toshiba TXx9 SPI controller" depends on GENERIC_GPIO && CPU_TX49XX diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index e9cbd18217a0..557aaadf56b2 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -2,9 +2,7 @@ # Makefile for kernel SPI drivers. # -ifeq ($(CONFIG_SPI_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG # small core, mostly translating board-specific # config declarations into driver model code @@ -34,11 +32,14 @@ obj-$(CONFIG_SPI_PL022) += amba-pl022.o obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o -obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o +obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_lib.o +obj-$(CONFIG_SPI_FSL_ESPI) += spi_fsl_espi.o +obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o +obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o obj-$(CONFIG_SPI_TXX9) += spi_txx9.o obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 4c37c4e28647..fb3d1b31772d 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -27,7 +27,6 @@ /* * TODO: * - add timeout on polled transfers - * - add generic DMA framework support */ #include <linux/init.h> @@ -45,6 +44,9 @@ #include <linux/amba/pl022.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/scatterlist.h> /* * This macro is used to define some register default values. @@ -381,6 +383,14 @@ struct pl022 { enum ssp_reading read; enum ssp_writing write; u32 exp_fifo_level; + /* DMA settings */ +#ifdef CONFIG_DMA_ENGINE + struct dma_chan *dma_rx_channel; + struct dma_chan *dma_tx_channel; + struct sg_table sgt_rx; + struct sg_table sgt_tx; + char *dummypage; +#endif }; /** @@ -406,7 +416,7 @@ struct chip_data { u16 dmacr; u16 cpsr; u8 n_bytes; - u8 enable_dma:1; + bool enable_dma; enum ssp_reading read; enum ssp_writing write; void (*cs_control) (u32 command); @@ -763,6 +773,371 @@ static void *next_transfer(struct pl022 *pl022) } return STATE_DONE; } + +/* + * This DMA functionality is only compiled in if we have + * access to the generic DMA devices/DMA engine. + */ +#ifdef CONFIG_DMA_ENGINE +static void unmap_free_dma_scatter(struct pl022 *pl022) +{ + /* Unmap and free the SG tables */ + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, DMA_FROM_DEVICE); + sg_free_table(&pl022->sgt_rx); + sg_free_table(&pl022->sgt_tx); +} + +static void dma_callback(void *data) +{ + struct pl022 *pl022 = data; + struct spi_message *msg = pl022->cur_msg; + + BUG_ON(!pl022->sgt_rx.sgl); + +#ifdef VERBOSE_DEBUG + /* + * Optionally dump out buffers to inspect contents, this is + * good if you want to convince yourself that the loopback + * read/write contents are the same, when adopting to a new + * DMA engine. + */ + { + struct scatterlist *sg; + unsigned int i; + + dma_sync_sg_for_cpu(&pl022->adev->dev, + pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, + DMA_FROM_DEVICE); + + for_each_sg(pl022->sgt_rx.sgl, sg, pl022->sgt_rx.nents, i) { + dev_dbg(&pl022->adev->dev, "SPI RX SG ENTRY: %d", i); + print_hex_dump(KERN_ERR, "SPI RX: ", + DUMP_PREFIX_OFFSET, + 16, + 1, + sg_virt(sg), + sg_dma_len(sg), + 1); + } + for_each_sg(pl022->sgt_tx.sgl, sg, pl022->sgt_tx.nents, i) { + dev_dbg(&pl022->adev->dev, "SPI TX SG ENTRY: %d", i); + print_hex_dump(KERN_ERR, "SPI TX: ", + DUMP_PREFIX_OFFSET, + 16, + 1, + sg_virt(sg), + sg_dma_len(sg), + 1); + } + } +#endif + + unmap_free_dma_scatter(pl022); + + /* Update total bytes transfered */ + msg->actual_length += pl022->cur_transfer->len; + if (pl022->cur_transfer->cs_change) + pl022->cur_chip-> + cs_control(SSP_CHIP_DESELECT); + + /* Move to next transfer */ + msg->state = next_transfer(pl022); + tasklet_schedule(&pl022->pump_transfers); +} + +static void setup_dma_scatter(struct pl022 *pl022, + void *buffer, + unsigned int length, + struct sg_table *sgtab) +{ + struct scatterlist *sg; + int bytesleft = length; + void *bufp = buffer; + int mapbytes; + int i; + + if (buffer) { + for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { + /* + * If there are less bytes left than what fits + * in the current page (plus page alignment offset) + * we just feed in this, else we stuff in as much + * as we can. + */ + if (bytesleft < (PAGE_SIZE - offset_in_page(bufp))) + mapbytes = bytesleft; + else + mapbytes = PAGE_SIZE - offset_in_page(bufp); + sg_set_page(sg, virt_to_page(bufp), + mapbytes, offset_in_page(bufp)); + bufp += mapbytes; + bytesleft -= mapbytes; + dev_dbg(&pl022->adev->dev, + "set RX/TX target page @ %p, %d bytes, %d left\n", + bufp, mapbytes, bytesleft); + } + } else { + /* Map the dummy buffer on every page */ + for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { + if (bytesleft < PAGE_SIZE) + mapbytes = bytesleft; + else + mapbytes = PAGE_SIZE; + sg_set_page(sg, virt_to_page(pl022->dummypage), + mapbytes, 0); + bytesleft -= mapbytes; + dev_dbg(&pl022->adev->dev, + "set RX/TX to dummy page %d bytes, %d left\n", + mapbytes, bytesleft); + + } + } + BUG_ON(bytesleft); +} + +/** + * configure_dma - configures the channels for the next transfer + * @pl022: SSP driver's private data structure + */ +static int configure_dma(struct pl022 *pl022) +{ + struct dma_slave_config rx_conf = { + .src_addr = SSP_DR(pl022->phybase), + .direction = DMA_FROM_DEVICE, + .src_maxburst = pl022->vendor->fifodepth >> 1, + }; + struct dma_slave_config tx_conf = { + .dst_addr = SSP_DR(pl022->phybase), + .direction = DMA_TO_DEVICE, + .dst_maxburst = pl022->vendor->fifodepth >> 1, + }; + unsigned int pages; + int ret; + int sglen; + struct dma_chan *rxchan = pl022->dma_rx_channel; + struct dma_chan *txchan = pl022->dma_tx_channel; + struct dma_async_tx_descriptor *rxdesc; + struct dma_async_tx_descriptor *txdesc; + dma_cookie_t cookie; + + /* Check that the channels are available */ + if (!rxchan || !txchan) + return -ENODEV; + + switch (pl022->read) { + case READING_NULL: + /* Use the same as for writing */ + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; + break; + case READING_U8: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + break; + case READING_U16: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case READING_U32: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + break; + } + + switch (pl022->write) { + case WRITING_NULL: + /* Use the same as for reading */ + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; + break; + case WRITING_U8: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + break; + case WRITING_U16: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case WRITING_U32: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;; + break; + } + + /* SPI pecularity: we need to read and write the same width */ + if (rx_conf.src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) + rx_conf.src_addr_width = tx_conf.dst_addr_width; + if (tx_conf.dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) + tx_conf.dst_addr_width = rx_conf.src_addr_width; + BUG_ON(rx_conf.src_addr_width != tx_conf.dst_addr_width); + + rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, + (unsigned long) &rx_conf); + txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, + (unsigned long) &tx_conf); + + /* Create sglists for the transfers */ + pages = (pl022->cur_transfer->len >> PAGE_SHIFT) + 1; + dev_dbg(&pl022->adev->dev, "using %d pages for transfer\n", pages); + + ret = sg_alloc_table(&pl022->sgt_rx, pages, GFP_KERNEL); + if (ret) + goto err_alloc_rx_sg; + + ret = sg_alloc_table(&pl022->sgt_tx, pages, GFP_KERNEL); + if (ret) + goto err_alloc_tx_sg; + + /* Fill in the scatterlists for the RX+TX buffers */ + setup_dma_scatter(pl022, pl022->rx, + pl022->cur_transfer->len, &pl022->sgt_rx); + setup_dma_scatter(pl022, pl022->tx, + pl022->cur_transfer->len, &pl022->sgt_tx); + + /* Map DMA buffers */ + sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, DMA_FROM_DEVICE); + if (!sglen) + goto err_rx_sgmap; + + sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); + if (!sglen) + goto err_tx_sgmap; + + /* Send both scatterlists */ + rxdesc = rxchan->device->device_prep_slave_sg(rxchan, + pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, + DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!rxdesc) + goto err_rxdesc; + + txdesc = txchan->device->device_prep_slave_sg(txchan, + pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, + DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!txdesc) + goto err_txdesc; + + /* Put the callback on the RX transfer only, that should finish last */ + rxdesc->callback = dma_callback; + rxdesc->callback_param = pl022; + + /* Submit and fire RX and TX with TX last so we're ready to read! */ + cookie = rxdesc->tx_submit(rxdesc); + if (dma_submit_error(cookie)) + goto err_submit_rx; + cookie = txdesc->tx_submit(txdesc); + if (dma_submit_error(cookie)) + goto err_submit_tx; + rxchan->device->device_issue_pending(rxchan); + txchan->device->device_issue_pending(txchan); + + return 0; + +err_submit_tx: +err_submit_rx: +err_txdesc: + txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0); +err_rxdesc: + rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0); + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); +err_tx_sgmap: + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + pl022->sgt_tx.nents, DMA_FROM_DEVICE); +err_rx_sgmap: + sg_free_table(&pl022->sgt_tx); +err_alloc_tx_sg: + sg_free_table(&pl022->sgt_rx); +err_alloc_rx_sg: + return -ENOMEM; +} + +static int __init pl022_dma_probe(struct pl022 *pl022) +{ + dma_cap_mask_t mask; + + /* Try to acquire a generic DMA engine slave channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + /* + * We need both RX and TX channels to do DMA, else do none + * of them. + */ + pl022->dma_rx_channel = dma_request_channel(mask, + pl022->master_info->dma_filter, + pl022->master_info->dma_rx_param); + if (!pl022->dma_rx_channel) { + dev_err(&pl022->adev->dev, "no RX DMA channel!\n"); + goto err_no_rxchan; + } + + pl022->dma_tx_channel = dma_request_channel(mask, + pl022->master_info->dma_filter, + pl022->master_info->dma_tx_param); + if (!pl022->dma_tx_channel) { + dev_err(&pl022->adev->dev, "no TX DMA channel!\n"); + goto err_no_txchan; + } + + pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!pl022->dummypage) { + dev_err(&pl022->adev->dev, "no DMA dummypage!\n"); + goto err_no_dummypage; + } + + dev_info(&pl022->adev->dev, "setup for DMA on RX %s, TX %s\n", + dma_chan_name(pl022->dma_rx_channel), + dma_chan_name(pl022->dma_tx_channel)); + + return 0; + +err_no_dummypage: + dma_release_channel(pl022->dma_tx_channel); +err_no_txchan: + dma_release_channel(pl022->dma_rx_channel); + pl022->dma_rx_channel = NULL; +err_no_rxchan: + return -ENODEV; +} + +static void terminate_dma(struct pl022 *pl022) +{ + struct dma_chan *rxchan = pl022->dma_rx_channel; + struct dma_chan *txchan = pl022->dma_tx_channel; + + rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0); + txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0); + unmap_free_dma_scatter(pl022); +} + +static void pl022_dma_remove(struct pl022 *pl022) +{ + if (pl022->busy) + terminate_dma(pl022); + if (pl022->dma_tx_channel) + dma_release_channel(pl022->dma_tx_channel); + if (pl022->dma_rx_channel) + dma_release_channel(pl022->dma_rx_channel); + kfree(pl022->dummypage); +} + +#else +static inline int configure_dma(struct pl022 *pl022) +{ + return -ENODEV; +} + +static inline int pl022_dma_probe(struct pl022 *pl022) +{ + return 0; +} + +static inline void pl022_dma_remove(struct pl022 *pl022) +{ +} +#endif + /** * pl022_interrupt_handler - Interrupt handler for SSP controller * @@ -794,14 +1169,17 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) if (unlikely(!irq_status)) return IRQ_NONE; - /* This handles the error code interrupts */ + /* + * This handles the FIFO interrupts, the timeout + * interrupts are flatly ignored, they cannot be + * trusted. + */ if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) { /* * Overrun interrupt - bail out since our Data has been * corrupted */ - dev_err(&pl022->adev->dev, - "FIFO overrun\n"); + dev_err(&pl022->adev->dev, "FIFO overrun\n"); if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF) dev_err(&pl022->adev->dev, "RXFIFO is full\n"); @@ -896,8 +1274,8 @@ static int set_up_next_transfer(struct pl022 *pl022, } /** - * pump_transfers - Tasklet function which schedules next interrupt transfer - * when running in interrupt transfer mode. + * pump_transfers - Tasklet function which schedules next transfer + * when running in interrupt or DMA transfer mode. * @data: SSP driver private data structure * */ @@ -954,65 +1332,23 @@ static void pump_transfers(unsigned long data) } /* Flush the FIFOs and let's go! */ flush(pl022); - writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); -} - -/** - * NOT IMPLEMENTED - * configure_dma - It configures the DMA pipes for DMA transfers - * @data: SSP driver's private data structure - * - */ -static int configure_dma(void *data) -{ - struct pl022 *pl022 = data; - dev_dbg(&pl022->adev->dev, "configure DMA\n"); - return -ENOTSUPP; -} - -/** - * do_dma_transfer - It handles transfers of the current message - * if it is DMA xfer. - * NOT FULLY IMPLEMENTED - * @data: SSP driver's private data structure - */ -static void do_dma_transfer(void *data) -{ - struct pl022 *pl022 = data; - - if (configure_dma(data)) { - dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n"); - goto err_config_dma; - } - /* TODO: Implememt DMA setup of pipes here */ - - /* Enable target chip, set up transfer */ - pl022->cur_chip->cs_control(SSP_CHIP_SELECT); - if (set_up_next_transfer(pl022, pl022->cur_transfer)) { - /* Error path */ - pl022->cur_msg->state = STATE_ERROR; - pl022->cur_msg->status = -EIO; - giveback(pl022); + if (pl022->cur_chip->enable_dma) { + if (configure_dma(pl022)) { + dev_dbg(&pl022->adev->dev, + "configuration of DMA failed, fall back to interrupt mode\n"); + goto err_config_dma; + } return; } - /* Enable SSP */ - writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), - SSP_CR1(pl022->virtbase)); - - /* TODO: Enable the DMA transfer here */ - return; - err_config_dma: - pl022->cur_msg->state = STATE_ERROR; - pl022->cur_msg->status = -EIO; - giveback(pl022); - return; +err_config_dma: + writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); } -static void do_interrupt_transfer(void *data) +static void do_interrupt_dma_transfer(struct pl022 *pl022) { - struct pl022 *pl022 = data; + u32 irqflags = ENABLE_ALL_INTERRUPTS; /* Enable target chip */ pl022->cur_chip->cs_control(SSP_CHIP_SELECT); @@ -1023,15 +1359,26 @@ static void do_interrupt_transfer(void *data) giveback(pl022); return; } + /* If we're using DMA, set up DMA here */ + if (pl022->cur_chip->enable_dma) { + /* Configure DMA transfer */ + if (configure_dma(pl022)) { + dev_dbg(&pl022->adev->dev, + "configuration of DMA failed, fall back to interrupt mode\n"); + goto err_config_dma; + } + /* Disable interrupts in DMA mode, IRQ from DMA controller */ + irqflags = DISABLE_ALL_INTERRUPTS; + } +err_config_dma: /* Enable SSP, turn on interrupts */ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), SSP_CR1(pl022->virtbase)); - writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); + writew(irqflags, SSP_IMSC(pl022->virtbase)); } -static void do_polling_transfer(void *data) +static void do_polling_transfer(struct pl022 *pl022) { - struct pl022 *pl022 = data; struct spi_message *message = NULL; struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; @@ -1101,7 +1448,7 @@ static void do_polling_transfer(void *data) * * This function checks if there is any spi message in the queue that * needs processing and delegate control to appropriate function - * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer() + * do_polling_transfer()/do_interrupt_dma_transfer() * based on the kind of the transfer * */ @@ -1150,10 +1497,8 @@ static void pump_messages(struct work_struct *work) if (pl022->cur_chip->xfer_type == POLLING_TRANSFER) do_polling_transfer(pl022); - else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER) - do_interrupt_transfer(pl022); else - do_dma_transfer(pl022); + do_interrupt_dma_transfer(pl022); } @@ -1248,100 +1593,56 @@ static int destroy_queue(struct pl022 *pl022) } static int verify_controller_parameters(struct pl022 *pl022, - struct pl022_config_chip *chip_info) + struct pl022_config_chip const *chip_info) { - if ((chip_info->lbm != LOOPBACK_ENABLED) - && (chip_info->lbm != LOOPBACK_DISABLED)) { - dev_err(chip_info->dev, - "loopback Mode is configured incorrectly\n"); - return -EINVAL; - } if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "interface is configured incorrectly\n"); return -EINVAL; } if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) && (!pl022->vendor->unidir)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "unidirectional mode not supported in this " "hardware version\n"); return -EINVAL; } if ((chip_info->hierarchy != SSP_MASTER) && (chip_info->hierarchy != SSP_SLAVE)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "hierarchy is configured incorrectly\n"); return -EINVAL; } - if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN) - || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) { - dev_err(chip_info->dev, - "cpsdvsr is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->endian_rx != SSP_RX_MSB) - && (chip_info->endian_rx != SSP_RX_LSB)) { - dev_err(chip_info->dev, - "RX FIFO endianess is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->endian_tx != SSP_TX_MSB) - && (chip_info->endian_tx != SSP_TX_LSB)) { - dev_err(chip_info->dev, - "TX FIFO endianess is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->data_size < SSP_DATA_BITS_4) - || (chip_info->data_size > SSP_DATA_BITS_32)) { - dev_err(chip_info->dev, - "DATA Size is configured incorrectly\n"); - return -EINVAL; - } if ((chip_info->com_mode != INTERRUPT_TRANSFER) && (chip_info->com_mode != DMA_TRANSFER) && (chip_info->com_mode != POLLING_TRANSFER)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Communication mode is configured incorrectly\n"); return -EINVAL; } if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM) || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "RX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC) || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "TX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } - if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) { - if ((chip_info->clk_phase != SSP_CLK_FIRST_EDGE) - && (chip_info->clk_phase != SSP_CLK_SECOND_EDGE)) { - dev_err(chip_info->dev, - "Clock Phase is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW) - && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) { - dev_err(chip_info->dev, - "Clock Polarity is configured incorrectly\n"); - return -EINVAL; - } - } if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { if ((chip_info->ctrl_len < SSP_BITS_4) || (chip_info->ctrl_len > SSP_BITS_32)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "CTRL LEN is configured incorrectly\n"); return -EINVAL; } if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO) && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Wait State is configured incorrectly\n"); return -EINVAL; } @@ -1350,24 +1651,20 @@ static int verify_controller_parameters(struct pl022 *pl022, if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) && (chip_info->duplex != - SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) - dev_err(chip_info->dev, + SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) { + dev_err(&pl022->adev->dev, "Microwire duplex mode is configured incorrectly\n"); return -EINVAL; + } } else { if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Microwire half duplex mode requested," " but this is only available in the" " ST version of PL022\n"); return -EINVAL; } } - if (chip_info->cs_control == NULL) { - dev_warn(chip_info->dev, - "Chip Select Function is NULL for this chip\n"); - chip_info->cs_control = null_cs_control; - } return 0; } @@ -1467,22 +1764,24 @@ static int calculate_effective_freq(struct pl022 *pl022, return 0; } -/** - * NOT IMPLEMENTED - * process_dma_info - Processes the DMA info provided by client drivers - * @chip_info: chip info provided by client device - * @chip: Runtime state maintained by the SSP controller for each spi device - * - * This function processes and stores DMA config provided by client driver - * into the runtime state maintained by the SSP controller driver + +/* + * A piece of default chip info unless the platform + * supplies it. */ -static int process_dma_info(struct pl022_config_chip *chip_info, - struct chip_data *chip) -{ - dev_err(chip_info->dev, - "cannot process DMA info, DMA not implemented!\n"); - return -ENOTSUPP; -} +static const struct pl022_config_chip pl022_default_chip_info = { + .com_mode = POLLING_TRANSFER, + .iface = SSP_INTERFACE_MOTOROLA_SPI, + .hierarchy = SSP_SLAVE, + .slave_tx_disable = DO_NOT_DRIVE_TX, + .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, + .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, + .ctrl_len = SSP_BITS_8, + .wait_state = SSP_MWIRE_WAIT_ZERO, + .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, + .cs_control = null_cs_control, +}; + /** * pl022_setup - setup function registered to SPI master framework @@ -1496,23 +1795,15 @@ static int process_dma_info(struct pl022_config_chip *chip_info, * controller hardware here, that is not done until the actual transfer * commence. */ - -/* FIXME: JUST GUESSING the spi->mode bits understood by this driver */ -#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ - | SPI_LSB_FIRST | SPI_LOOP) - static int pl022_setup(struct spi_device *spi) { - struct pl022_config_chip *chip_info; + struct pl022_config_chip const *chip_info; struct chip_data *chip; + struct ssp_clock_params clk_freq; int status = 0; struct pl022 *pl022 = spi_master_get_devdata(spi->master); - - if (spi->mode & ~MODEBITS) { - dev_dbg(&spi->dev, "unsupported mode bits %x\n", - spi->mode & ~MODEBITS); - return -EINVAL; - } + unsigned int bits = spi->bits_per_word; + u32 tmp; if (!spi->max_speed_hz) return -EINVAL; @@ -1535,48 +1826,13 @@ static int pl022_setup(struct spi_device *spi) chip_info = spi->controller_data; if (chip_info == NULL) { + chip_info = &pl022_default_chip_info; /* spi_board_info.controller_data not is supplied */ dev_dbg(&spi->dev, "using default controller_data settings\n"); - - chip_info = - kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL); - - if (!chip_info) { - dev_err(&spi->dev, - "cannot allocate controller data\n"); - status = -ENOMEM; - goto err_first_setup; - } - - dev_dbg(&spi->dev, "allocated memory for controller data\n"); - - /* Pointer back to the SPI device */ - chip_info->dev = &spi->dev; - /* - * Set controller data default values: - * Polling is supported by default - */ - chip_info->lbm = LOOPBACK_DISABLED; - chip_info->com_mode = POLLING_TRANSFER; - chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI; - chip_info->hierarchy = SSP_SLAVE; - chip_info->slave_tx_disable = DO_NOT_DRIVE_TX; - chip_info->endian_tx = SSP_TX_LSB; - chip_info->endian_rx = SSP_RX_LSB; - chip_info->data_size = SSP_DATA_BITS_12; - chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM; - chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC; - chip_info->clk_phase = SSP_CLK_SECOND_EDGE; - chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW; - chip_info->ctrl_len = SSP_BITS_8; - chip_info->wait_state = SSP_MWIRE_WAIT_ZERO; - chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX; - chip_info->cs_control = null_cs_control; - } else { + } else dev_dbg(&spi->dev, "using user supplied controller_data settings\n"); - } /* * We can override with custom divisors, else we use the board @@ -1586,29 +1842,48 @@ static int pl022_setup(struct spi_device *spi) && (0 == chip_info->clk_freq.scr)) { status = calculate_effective_freq(pl022, spi->max_speed_hz, - &chip_info->clk_freq); + &clk_freq); if (status < 0) goto err_config_params; } else { - if ((chip_info->clk_freq.cpsdvsr % 2) != 0) - chip_info->clk_freq.cpsdvsr = - chip_info->clk_freq.cpsdvsr - 1; + memcpy(&clk_freq, &chip_info->clk_freq, sizeof(clk_freq)); + if ((clk_freq.cpsdvsr % 2) != 0) + clk_freq.cpsdvsr = + clk_freq.cpsdvsr - 1; + } + if ((clk_freq.cpsdvsr < CPSDVR_MIN) + || (clk_freq.cpsdvsr > CPSDVR_MAX)) { + dev_err(&spi->dev, + "cpsdvsr is configured incorrectly\n"); + goto err_config_params; } + + status = verify_controller_parameters(pl022, chip_info); if (status) { dev_err(&spi->dev, "controller data is incorrect"); goto err_config_params; } + /* Now set controller state based on controller data */ chip->xfer_type = chip_info->com_mode; - chip->cs_control = chip_info->cs_control; - - if (chip_info->data_size <= 8) { - dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n"); + if (!chip_info->cs_control) { + chip->cs_control = null_cs_control; + dev_warn(&spi->dev, + "chip select function is NULL for this chip\n"); + } else + chip->cs_control = chip_info->cs_control; + + if (bits <= 3) { + /* PL022 doesn't support less than 4-bits */ + status = -ENOTSUPP; + goto err_config_params; + } else if (bits <= 8) { + dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); chip->n_bytes = 1; chip->read = READING_U8; chip->write = WRITING_U8; - } else if (chip_info->data_size <= 16) { + } else if (bits <= 16) { dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n"); chip->n_bytes = 2; chip->read = READING_U16; @@ -1625,6 +1900,7 @@ static int pl022_setup(struct spi_device *spi) dev_err(&spi->dev, "a standard pl022 can only handle " "1 <= n <= 16 bit words\n"); + status = -ENOTSUPP; goto err_config_params; } } @@ -1636,9 +1912,8 @@ static int pl022_setup(struct spi_device *spi) chip->cpsr = 0; if ((chip_info->com_mode == DMA_TRANSFER) && ((pl022->master_info)->enable_dma)) { - chip->enable_dma = 1; + chip->enable_dma = true; dev_dbg(&spi->dev, "DMA mode set in controller state\n"); - status = process_dma_info(chip_info, chip); if (status < 0) goto err_config_params; SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, @@ -1646,7 +1921,7 @@ static int pl022_setup(struct spi_device *spi) SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, SSP_DMACR_MASK_TXDMAE, 1); } else { - chip->enable_dma = 0; + chip->enable_dma = false; dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n"); SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0); @@ -1654,10 +1929,12 @@ static int pl022_setup(struct spi_device *spi) SSP_DMACR_MASK_TXDMAE, 1); } - chip->cpsr = chip_info->clk_freq.cpsdvsr; + chip->cpsr = clk_freq.cpsdvsr; /* Special setup for the ST micro extended control registers */ if (pl022->vendor->extended_cr) { + u32 etx; + if (pl022->vendor->pl023) { /* These bits are only in the PL023 */ SSP_WRITE_BITS(chip->cr1, chip_info->clkdelay, @@ -1673,29 +1950,51 @@ static int pl022_setup(struct spi_device *spi) SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT_ST, 6); } - SSP_WRITE_BITS(chip->cr0, chip_info->data_size, + SSP_WRITE_BITS(chip->cr0, bits - 1, SSP_CR0_MASK_DSS_ST, 0); - SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, - SSP_CR1_MASK_RENDN_ST, 4); - SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, - SSP_CR1_MASK_TENDN_ST, 5); + + if (spi->mode & SPI_LSB_FIRST) { + tmp = SSP_RX_LSB; + etx = SSP_TX_LSB; + } else { + tmp = SSP_RX_MSB; + etx = SSP_TX_MSB; + } + SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_RENDN_ST, 4); + SSP_WRITE_BITS(chip->cr1, etx, SSP_CR1_MASK_TENDN_ST, 5); SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL_ST, 7); SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL_ST, 10); } else { - SSP_WRITE_BITS(chip->cr0, chip_info->data_size, + SSP_WRITE_BITS(chip->cr0, bits - 1, SSP_CR0_MASK_DSS, 0); SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 4); } + /* Stuff that is common for all versions */ - SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6); - SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7); - SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8); + if (spi->mode & SPI_CPOL) + tmp = SSP_CLK_POL_IDLE_HIGH; + else + tmp = SSP_CLK_POL_IDLE_LOW; + SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPO, 6); + + if (spi->mode & SPI_CPHA) + tmp = SSP_CLK_SECOND_EDGE; + else + tmp = SSP_CLK_FIRST_EDGE; + SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPH, 7); + + SSP_WRITE_BITS(chip->cr0, clk_freq.scr, SSP_CR0_MASK_SCR, 8); /* Loopback is available on all versions except PL023 */ - if (!pl022->vendor->pl023) - SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0); + if (!pl022->vendor->pl023) { + if (spi->mode & SPI_LOOP) + tmp = LOOPBACK_ENABLED; + else + tmp = LOOPBACK_DISABLED; + SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_LBM, 0); + } SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1); SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2); SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3); @@ -1704,7 +2003,7 @@ static int pl022_setup(struct spi_device *spi) spi_set_ctldata(spi, chip); return status; err_config_params: - err_first_setup: + spi_set_ctldata(spi, NULL); kfree(chip); return status; } @@ -1766,12 +2065,21 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) master->setup = pl022_setup; master->transfer = pl022_transfer; + /* + * Supports mode 0-3, loopback, and active low CS. Transfers are + * always MS bit first on the original pl022. + */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; + if (pl022->vendor->extended_cr) + master->mode_bits |= SPI_LSB_FIRST; + dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num); status = amba_request_regions(adev, NULL); if (status) goto err_no_ioregion; + pl022->phybase = adev->res.start; pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res)); if (pl022->virtbase == NULL) { status = -ENOMEM; @@ -1798,6 +2106,14 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status); goto err_no_irq; } + + /* Get DMA channels */ + if (platform_info->enable_dma) { + status = pl022_dma_probe(pl022); + if (status != 0) + goto err_no_dma; + } + /* Initialize and start queue */ status = init_queue(pl022); if (status != 0) { @@ -1826,6 +2142,8 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) err_start_queue: err_init_queue: destroy_queue(pl022); + pl022_dma_remove(pl022); + err_no_dma: free_irq(adev->irq[0], pl022); err_no_irq: clk_put(pl022->clk); @@ -1856,6 +2174,7 @@ pl022_remove(struct amba_device *adev) return status; } load_ssp_default_config(pl022); + pl022_dma_remove(pl022); free_irq(adev->irq[0], pl022); clk_disable(pl022->clk); clk_put(pl022->clk); diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index c4e04428992d..154529aacc03 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -654,6 +654,8 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) struct spi_transfer *xfer; unsigned long flags; struct device *controller = spi->master->dev.parent; + u8 bits; + struct atmel_spi_device *asd; as = spi_master_get_devdata(spi->master); @@ -672,8 +674,18 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) return -EINVAL; } + if (xfer->bits_per_word) { + asd = spi->controller_state; + bits = (asd->csr >> 4) & 0xf; + if (bits != xfer->bits_per_word - 8) { + dev_dbg(&spi->dev, "you can't yet change " + "bits_per_word in transfers\n"); + return -ENOPROTOOPT; + } + } + /* FIXME implement these protocol options!! */ - if (xfer->bits_per_word || xfer->speed_hz) { + if (xfer->speed_hz) { dev_dbg(&spi->dev, "no protocol options yet\n"); return -ENOPROTOOPT; } diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index b3a94ca0a75a..2a651e61bfbf 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -296,6 +296,19 @@ static int omap2_mcspi_enable_clocks(struct omap2_mcspi *mcspi) return 0; } +static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) +{ + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(1000); + while (!(__raw_readl(reg) & bit)) { + if (time_after(jiffies, timeout)) + return -1; + cpu_relax(); + } + return 0; +} + static unsigned omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) { @@ -309,11 +322,14 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) u32 l; u8 * rx; const u8 * tx; + void __iomem *chstat_reg; mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; l = mcspi_cached_chconf0(spi); + chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; + count = xfer->len; c = count; word_len = cs->word_len; @@ -382,6 +398,16 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) if (tx != NULL) { wait_for_completion(&mcspi_dma->dma_tx_completion); dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE); + + /* for TX_ONLY mode, be sure all words have shifted out */ + if (rx == NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXS) < 0) + dev_err(&spi->dev, "TXS timed out\n"); + else if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_EOT) < 0) + dev_err(&spi->dev, "EOT timed out\n"); + } } if (rx != NULL) { @@ -435,19 +461,6 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) return count; } -static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) -{ - unsigned long timeout; - - timeout = jiffies + msecs_to_jiffies(1000); - while (!(__raw_readl(reg) & bit)) { - if (time_after(jiffies, timeout)) - return -1; - cpu_relax(); - } - return 0; -} - static unsigned omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) { @@ -489,10 +502,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %02x\n", + dev_vdbg(&spi->dev, "write-%d %02x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -506,10 +517,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %02x\n", + dev_vdbg(&spi->dev, "read-%d %02x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -522,10 +531,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %02x\n", + dev_vdbg(&spi->dev, "read-%d %02x\n", word_len, *(rx - 1)); -#endif } } while (c); } else if (word_len <= 16) { @@ -542,10 +549,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %04x\n", + dev_vdbg(&spi->dev, "write-%d %04x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -559,10 +564,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %04x\n", + dev_vdbg(&spi->dev, "read-%d %04x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -575,10 +578,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %04x\n", + dev_vdbg(&spi->dev, "read-%d %04x\n", word_len, *(rx - 1)); -#endif } } while (c); } else if (word_len <= 32) { @@ -595,10 +596,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %08x\n", + dev_vdbg(&spi->dev, "write-%d %08x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -612,10 +611,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %08x\n", + dev_vdbg(&spi->dev, "read-%d %08x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -628,10 +625,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %08x\n", + dev_vdbg(&spi->dev, "read-%d %08x\n", word_len, *(rx - 1)); -#endif } } while (c); } @@ -644,6 +639,12 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } else if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_EOT) < 0) dev_err(&spi->dev, "EOT timed out\n"); + + /* disable chan to purge rx datas received in TX_ONLY transfer, + * otherwise these rx datas will affect the direct following + * RX_ONLY transfer. + */ + omap2_mcspi_set_enable(spi, 0); } out: omap2_mcspi_set_enable(spi, 1); diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c index 3aea50da7b29..0b677dc041ad 100644 --- a/drivers/spi/orion_spi.c +++ b/drivers/spi/orion_spi.c @@ -404,7 +404,7 @@ static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) goto msg_rejected; } - if ((t != NULL) && t->bits_per_word) + if (t->bits_per_word) bits_per_word = t->bits_per_word; if ((bits_per_word != 8) && (bits_per_word != 16)) { @@ -415,7 +415,7 @@ static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) goto msg_rejected; } /*make sure buffer length is even when working in 16 bit mode*/ - if ((t != NULL) && (t->bits_per_word == 16) && (t->len & 1)) { + if ((t->bits_per_word == 16) && (t->len & 1)) { dev_err(&spi->dev, "message rejected : " "odd data length (%d) while in 16 bit mode\n", diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 10a6dc3d37ac..ab483a0ec6d0 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1,7 +1,7 @@ /* * Blackfin On-Chip SPI Driver * - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * * Enter bugs at http://blackfin.uclinux.org/ * @@ -41,13 +41,16 @@ MODULE_LICENSE("GPL"); #define RUNNING_STATE ((void *)1) #define DONE_STATE ((void *)2) #define ERROR_STATE ((void *)-1) -#define QUEUE_RUNNING 0 -#define QUEUE_STOPPED 1 -/* Value to send if no TX value is supplied */ -#define SPI_IDLE_TXVAL 0x0000 +struct bfin_spi_master_data; -struct driver_data { +struct bfin_spi_transfer_ops { + void (*write) (struct bfin_spi_master_data *); + void (*read) (struct bfin_spi_master_data *); + void (*duplex) (struct bfin_spi_master_data *); +}; + +struct bfin_spi_master_data { /* Driver model hookup */ struct platform_device *pdev; @@ -69,7 +72,7 @@ struct driver_data { spinlock_t lock; struct list_head queue; int busy; - int run; + bool running; /* Message Transfer pump */ struct tasklet_struct pump_transfers; @@ -77,7 +80,7 @@ struct driver_data { /* Current message transfer state info */ struct spi_message *cur_msg; struct spi_transfer *cur_transfer; - struct chip_data *cur_chip; + struct bfin_spi_slave_data *cur_chip; size_t len_in_bytes; size_t len; void *tx; @@ -92,38 +95,37 @@ struct driver_data { dma_addr_t rx_dma; dma_addr_t tx_dma; + int irq_requested; + int spi_irq; + size_t rx_map_len; size_t tx_map_len; u8 n_bytes; + u16 ctrl_reg; + u16 flag_reg; + int cs_change; - void (*write) (struct driver_data *); - void (*read) (struct driver_data *); - void (*duplex) (struct driver_data *); + const struct bfin_spi_transfer_ops *ops; }; -struct chip_data { +struct bfin_spi_slave_data { u16 ctl_reg; u16 baud; u16 flag; u8 chip_select_num; - u8 n_bytes; - u8 width; /* 0 or 1 */ u8 enable_dma; - u8 bits_per_word; /* 8 or 16 */ - u8 cs_change_per_word; u16 cs_chg_udelay; /* Some devices require > 255usec delay */ u32 cs_gpio; u16 idle_tx_val; - void (*write) (struct driver_data *); - void (*read) (struct driver_data *); - void (*duplex) (struct driver_data *); + u8 pio_interrupt; /* use spi data irq */ + const struct bfin_spi_transfer_ops *ops; }; #define DEFINE_SPI_REG(reg, off) \ -static inline u16 read_##reg(struct driver_data *drv_data) \ +static inline u16 read_##reg(struct bfin_spi_master_data *drv_data) \ { return bfin_read16(drv_data->regs_base + off); } \ -static inline void write_##reg(struct driver_data *drv_data, u16 v) \ +static inline void write_##reg(struct bfin_spi_master_data *drv_data, u16 v) \ { bfin_write16(drv_data->regs_base + off, v); } DEFINE_SPI_REG(CTRL, 0x00) @@ -134,7 +136,7 @@ DEFINE_SPI_REG(RDBR, 0x10) DEFINE_SPI_REG(BAUD, 0x14) DEFINE_SPI_REG(SHAW, 0x18) -static void bfin_spi_enable(struct driver_data *drv_data) +static void bfin_spi_enable(struct bfin_spi_master_data *drv_data) { u16 cr; @@ -142,7 +144,7 @@ static void bfin_spi_enable(struct driver_data *drv_data) write_CTRL(drv_data, (cr | BIT_CTL_ENABLE)); } -static void bfin_spi_disable(struct driver_data *drv_data) +static void bfin_spi_disable(struct bfin_spi_master_data *drv_data) { u16 cr; @@ -165,7 +167,7 @@ static u16 hz_to_spi_baud(u32 speed_hz) return spi_baud; } -static int bfin_spi_flush(struct driver_data *drv_data) +static int bfin_spi_flush(struct bfin_spi_master_data *drv_data) { unsigned long limit = loops_per_jiffy << 1; @@ -179,13 +181,12 @@ static int bfin_spi_flush(struct driver_data *drv_data) } /* Chip select operation functions for cs_change flag */ -static void bfin_spi_cs_active(struct driver_data *drv_data, struct chip_data *chip) +static void bfin_spi_cs_active(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip) { - if (likely(chip->chip_select_num)) { + if (likely(chip->chip_select_num < MAX_CTRL_CS)) { u16 flag = read_FLAG(drv_data); - flag |= chip->flag; - flag &= ~(chip->flag << 8); + flag &= ~chip->flag; write_FLAG(drv_data, flag); } else { @@ -193,13 +194,13 @@ static void bfin_spi_cs_active(struct driver_data *drv_data, struct chip_data *c } } -static void bfin_spi_cs_deactive(struct driver_data *drv_data, struct chip_data *chip) +static void bfin_spi_cs_deactive(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) { - if (likely(chip->chip_select_num)) { + if (likely(chip->chip_select_num < MAX_CTRL_CS)) { u16 flag = read_FLAG(drv_data); - flag &= ~chip->flag; - flag |= (chip->flag << 8); + flag |= chip->flag; write_FLAG(drv_data, flag); } else { @@ -211,16 +212,43 @@ static void bfin_spi_cs_deactive(struct driver_data *drv_data, struct chip_data udelay(chip->cs_chg_udelay); } +/* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */ +static inline void bfin_spi_cs_enable(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) +{ + if (chip->chip_select_num < MAX_CTRL_CS) { + u16 flag = read_FLAG(drv_data); + + flag |= (chip->flag >> 8); + + write_FLAG(drv_data, flag); + } +} + +static inline void bfin_spi_cs_disable(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) +{ + if (chip->chip_select_num < MAX_CTRL_CS) { + u16 flag = read_FLAG(drv_data); + + flag &= ~(chip->flag >> 8); + + write_FLAG(drv_data, flag); + } +} + /* stop controller and re-config current chip*/ -static void bfin_spi_restore_state(struct driver_data *drv_data) +static void bfin_spi_restore_state(struct bfin_spi_master_data *drv_data) { - struct chip_data *chip = drv_data->cur_chip; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; /* Clear status and disable clock */ write_STAT(drv_data, BIT_STAT_CLR); bfin_spi_disable(drv_data); dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n"); + SSYNC(); + /* Load the registers */ write_CTRL(drv_data, chip->ctl_reg); write_BAUD(drv_data, chip->baud); @@ -230,49 +258,12 @@ static void bfin_spi_restore_state(struct driver_data *drv_data) } /* used to kick off transfer in rx mode and read unwanted RX data */ -static inline void bfin_spi_dummy_read(struct driver_data *drv_data) +static inline void bfin_spi_dummy_read(struct bfin_spi_master_data *drv_data) { (void) read_RDBR(drv_data); } -static void bfin_spi_null_writer(struct driver_data *drv_data) -{ - u8 n_bytes = drv_data->n_bytes; - u16 tx_val = drv_data->cur_chip->idle_tx_val; - - /* clear RXS (we check for RXS inside the loop) */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->tx < drv_data->tx_end) { - write_TDBR(drv_data, tx_val); - drv_data->tx += n_bytes; - /* wait until transfer finished. - checking SPIF or TXS may not guarantee transfer completion */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - /* discard RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - } -} - -static void bfin_spi_null_reader(struct driver_data *drv_data) -{ - u8 n_bytes = drv_data->n_bytes; - u16 tx_val = drv_data->cur_chip->idle_tx_val; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - write_TDBR(drv_data, tx_val); - drv_data->rx += n_bytes; - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - bfin_spi_dummy_read(drv_data); - } -} - -static void bfin_spi_u8_writer(struct driver_data *drv_data) +static void bfin_spi_u8_writer(struct bfin_spi_master_data *drv_data) { /* clear RXS (we check for RXS inside the loop) */ bfin_spi_dummy_read(drv_data); @@ -288,25 +279,7 @@ static void bfin_spi_u8_writer(struct driver_data *drv_data) } } -static void bfin_spi_u8_cs_chg_writer(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* clear RXS (we check for RXS inside the loop) */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->tx < drv_data->tx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); - /* make sure transfer finished before deactiving CS */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - bfin_spi_dummy_read(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} - -static void bfin_spi_u8_reader(struct driver_data *drv_data) +static void bfin_spi_u8_reader(struct bfin_spi_master_data *drv_data) { u16 tx_val = drv_data->cur_chip->idle_tx_val; @@ -321,25 +294,7 @@ static void bfin_spi_u8_reader(struct driver_data *drv_data) } } -static void bfin_spi_u8_cs_chg_reader(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - u16 tx_val = chip->idle_tx_val; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, tx_val); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} - -static void bfin_spi_u8_duplex(struct driver_data *drv_data) +static void bfin_spi_u8_duplex(struct bfin_spi_master_data *drv_data) { /* discard old RX data and clear RXS */ bfin_spi_dummy_read(drv_data); @@ -352,24 +307,13 @@ static void bfin_spi_u8_duplex(struct driver_data *drv_data) } } -static void bfin_spi_u8_cs_chg_duplex(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} +static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = { + .write = bfin_spi_u8_writer, + .read = bfin_spi_u8_reader, + .duplex = bfin_spi_u8_duplex, +}; -static void bfin_spi_u16_writer(struct driver_data *drv_data) +static void bfin_spi_u16_writer(struct bfin_spi_master_data *drv_data) { /* clear RXS (we check for RXS inside the loop) */ bfin_spi_dummy_read(drv_data); @@ -386,26 +330,7 @@ static void bfin_spi_u16_writer(struct driver_data *drv_data) } } -static void bfin_spi_u16_cs_chg_writer(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* clear RXS (we check for RXS inside the loop) */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->tx < drv_data->tx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); - drv_data->tx += 2; - /* make sure transfer finished before deactiving CS */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - bfin_spi_dummy_read(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} - -static void bfin_spi_u16_reader(struct driver_data *drv_data) +static void bfin_spi_u16_reader(struct bfin_spi_master_data *drv_data) { u16 tx_val = drv_data->cur_chip->idle_tx_val; @@ -421,26 +346,7 @@ static void bfin_spi_u16_reader(struct driver_data *drv_data) } } -static void bfin_spi_u16_cs_chg_reader(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - u16 tx_val = chip->idle_tx_val; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, tx_val); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u16 *) (drv_data->rx) = read_RDBR(drv_data); - drv_data->rx += 2; - bfin_spi_cs_deactive(drv_data, chip); - } -} - -static void bfin_spi_u16_duplex(struct driver_data *drv_data) +static void bfin_spi_u16_duplex(struct bfin_spi_master_data *drv_data) { /* discard old RX data and clear RXS */ bfin_spi_dummy_read(drv_data); @@ -455,27 +361,14 @@ static void bfin_spi_u16_duplex(struct driver_data *drv_data) } } -static void bfin_spi_u16_cs_chg_duplex(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); - drv_data->tx += 2; - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u16 *) (drv_data->rx) = read_RDBR(drv_data); - drv_data->rx += 2; - bfin_spi_cs_deactive(drv_data, chip); - } -} +static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = { + .write = bfin_spi_u16_writer, + .read = bfin_spi_u16_reader, + .duplex = bfin_spi_u16_duplex, +}; -/* test if ther is more transfer to be done */ -static void *bfin_spi_next_transfer(struct driver_data *drv_data) +/* test if there is more transfer to be done */ +static void *bfin_spi_next_transfer(struct bfin_spi_master_data *drv_data) { struct spi_message *msg = drv_data->cur_msg; struct spi_transfer *trans = drv_data->cur_transfer; @@ -494,9 +387,9 @@ static void *bfin_spi_next_transfer(struct driver_data *drv_data) * caller already set message->status; * dma and pio irqs are blocked give finished message back */ -static void bfin_spi_giveback(struct driver_data *drv_data) +static void bfin_spi_giveback(struct bfin_spi_master_data *drv_data) { - struct chip_data *chip = drv_data->cur_chip; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; struct spi_transfer *last_transfer; unsigned long flags; struct spi_message *msg; @@ -525,10 +418,83 @@ static void bfin_spi_giveback(struct driver_data *drv_data) msg->complete(msg->context); } +/* spi data irq handler */ +static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) +{ + struct bfin_spi_master_data *drv_data = dev_id; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; + struct spi_message *msg = drv_data->cur_msg; + int n_bytes = drv_data->n_bytes; + + /* wait until transfer finished. */ + while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + cpu_relax(); + + if ((drv_data->tx && drv_data->tx >= drv_data->tx_end) || + (drv_data->rx && drv_data->rx >= (drv_data->rx_end - n_bytes))) { + /* last read */ + if (drv_data->rx) { + dev_dbg(&drv_data->pdev->dev, "last read\n"); + if (n_bytes == 2) + *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + else if (n_bytes == 1) + *(u8 *) (drv_data->rx) = read_RDBR(drv_data); + drv_data->rx += n_bytes; + } + + msg->actual_length += drv_data->len_in_bytes; + if (drv_data->cs_change) + bfin_spi_cs_deactive(drv_data, chip); + /* Move to next transfer */ + msg->state = bfin_spi_next_transfer(drv_data); + + disable_irq_nosync(drv_data->spi_irq); + + /* Schedule transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); + return IRQ_HANDLED; + } + + if (drv_data->rx && drv_data->tx) { + /* duplex */ + dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n"); + if (drv_data->n_bytes == 2) { + *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + } else if (drv_data->n_bytes == 1) { + *(u8 *) (drv_data->rx) = read_RDBR(drv_data); + write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); + } + } else if (drv_data->rx) { + /* read */ + dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n"); + if (drv_data->n_bytes == 2) + *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + else if (drv_data->n_bytes == 1) + *(u8 *) (drv_data->rx) = read_RDBR(drv_data); + write_TDBR(drv_data, chip->idle_tx_val); + } else if (drv_data->tx) { + /* write */ + dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n"); + bfin_spi_dummy_read(drv_data); + if (drv_data->n_bytes == 2) + write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + else if (drv_data->n_bytes == 1) + write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); + } + + if (drv_data->tx) + drv_data->tx += n_bytes; + if (drv_data->rx) + drv_data->rx += n_bytes; + + return IRQ_HANDLED; +} + static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) { - struct driver_data *drv_data = dev_id; - struct chip_data *chip = drv_data->cur_chip; + struct bfin_spi_master_data *drv_data = dev_id; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; struct spi_message *msg = drv_data->cur_msg; unsigned long timeout; unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel); @@ -540,10 +506,6 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) clear_dma_irqstat(drv_data->dma_channel); - /* Wait for DMA to complete */ - while (get_dma_curr_irqstat(drv_data->dma_channel) & DMA_RUN) - cpu_relax(); - /* * wait for the last transaction shifted out. HRM states: * at this point there may still be data in the SPI DMA FIFO waiting @@ -551,8 +513,8 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) * register until it goes low for 2 successive reads */ if (drv_data->tx != NULL) { - while ((read_STAT(drv_data) & TXS) || - (read_STAT(drv_data) & TXS)) + while ((read_STAT(drv_data) & BIT_STAT_TXS) || + (read_STAT(drv_data) & BIT_STAT_TXS)) cpu_relax(); } @@ -561,14 +523,14 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) dmastat, read_STAT(drv_data)); timeout = jiffies + HZ; - while (!(read_STAT(drv_data) & SPIF)) + while (!(read_STAT(drv_data) & BIT_STAT_SPIF)) if (!time_before(jiffies, timeout)) { dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF"); break; } else cpu_relax(); - if ((dmastat & DMA_ERR) && (spistat & RBSY)) { + if ((dmastat & DMA_ERR) && (spistat & BIT_STAT_RBSY)) { msg->state = ERROR_STATE; dev_err(&drv_data->pdev->dev, "dma receive: fifo/buffer overflow\n"); } else { @@ -588,20 +550,20 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) dev_dbg(&drv_data->pdev->dev, "disable dma channel irq%d\n", drv_data->dma_channel); - dma_disable_irq(drv_data->dma_channel); + dma_disable_irq_nosync(drv_data->dma_channel); return IRQ_HANDLED; } static void bfin_spi_pump_transfers(unsigned long data) { - struct driver_data *drv_data = (struct driver_data *)data; + struct bfin_spi_master_data *drv_data = (struct bfin_spi_master_data *)data; struct spi_message *message = NULL; struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; - struct chip_data *chip = NULL; - u8 width; - u16 cr, dma_width, dma_config; + struct bfin_spi_slave_data *chip = NULL; + unsigned int bits_per_word; + u16 cr, cr_width, dma_width, dma_config; u32 tranf_success = 1; u8 full_duplex = 0; @@ -639,7 +601,7 @@ static void bfin_spi_pump_transfers(unsigned long data) udelay(previous->delay_usecs); } - /* Setup the transfer state based on the type of transfer */ + /* Flush any existing transfers that may be sitting in the hardware */ if (bfin_spi_flush(drv_data) == 0) { dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); message->status = -EIO; @@ -679,52 +641,31 @@ static void bfin_spi_pump_transfers(unsigned long data) drv_data->cs_change = transfer->cs_change; /* Bits per word setup */ - switch (transfer->bits_per_word) { - case 8: + bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; + if (bits_per_word == 8) { drv_data->n_bytes = 1; - width = CFG_SPI_WORDSIZE8; - drv_data->read = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_reader : bfin_spi_u8_reader; - drv_data->write = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_writer : bfin_spi_u8_writer; - drv_data->duplex = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_duplex : bfin_spi_u8_duplex; - break; - - case 16: + drv_data->len = transfer->len; + cr_width = 0; + drv_data->ops = &bfin_bfin_spi_transfer_ops_u8; + } else if (bits_per_word == 16) { drv_data->n_bytes = 2; - width = CFG_SPI_WORDSIZE16; - drv_data->read = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_reader : bfin_spi_u16_reader; - drv_data->write = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_writer : bfin_spi_u16_writer; - drv_data->duplex = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_duplex : bfin_spi_u16_duplex; - break; - - default: - /* No change, the same as default setting */ - drv_data->n_bytes = chip->n_bytes; - width = chip->width; - drv_data->write = drv_data->tx ? chip->write : bfin_spi_null_writer; - drv_data->read = drv_data->rx ? chip->read : bfin_spi_null_reader; - drv_data->duplex = chip->duplex ? chip->duplex : bfin_spi_null_writer; - break; - } - cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); - cr |= (width << 8); - write_CTRL(drv_data, cr); - - if (width == CFG_SPI_WORDSIZE16) { drv_data->len = (transfer->len) >> 1; + cr_width = BIT_CTL_WORDSIZE; + drv_data->ops = &bfin_bfin_spi_transfer_ops_u16; } else { - drv_data->len = transfer->len; + dev_err(&drv_data->pdev->dev, "transfer: unsupported bits_per_word\n"); + message->status = -EINVAL; + bfin_spi_giveback(drv_data); + return; } + cr = read_CTRL(drv_data) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE); + cr |= cr_width; + write_CTRL(drv_data, cr); + dev_dbg(&drv_data->pdev->dev, - "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n", - drv_data->write, chip->write, bfin_spi_null_writer); + "transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n", + drv_data->ops, chip->ops, &bfin_bfin_spi_transfer_ops_u8); - /* speed and width has been set on per message */ message->state = RUNNING_STATE; dma_config = 0; @@ -735,13 +676,11 @@ static void bfin_spi_pump_transfers(unsigned long data) write_BAUD(drv_data, chip->baud); write_STAT(drv_data, BIT_STAT_CLR); - cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); - if (drv_data->cs_change) - bfin_spi_cs_active(drv_data, chip); + bfin_spi_cs_active(drv_data, chip); dev_dbg(&drv_data->pdev->dev, "now pumping a transfer: width is %d, len is %d\n", - width, transfer->len); + cr_width, transfer->len); /* * Try to map dma buffer and do a dma transfer. If successful use, @@ -760,7 +699,7 @@ static void bfin_spi_pump_transfers(unsigned long data) /* config dma channel */ dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n"); set_dma_x_count(drv_data->dma_channel, drv_data->len); - if (width == CFG_SPI_WORDSIZE16) { + if (cr_width == BIT_CTL_WORDSIZE) { set_dma_x_modify(drv_data->dma_channel, 2); dma_width = WDSIZE_16; } else { @@ -846,73 +785,100 @@ static void bfin_spi_pump_transfers(unsigned long data) dma_enable_irq(drv_data->dma_channel); local_irq_restore(flags); - } else { - /* IO mode write then read */ - dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); - - /* we always use SPI_WRITE mode. SPI_READ mode - seems to have problems with setting up the - output value in TDBR prior to the transfer. */ - write_CTRL(drv_data, (cr | CFG_SPI_WRITE)); - - if (full_duplex) { - /* full duplex mode */ - BUG_ON((drv_data->tx_end - drv_data->tx) != - (drv_data->rx_end - drv_data->rx)); - dev_dbg(&drv_data->pdev->dev, - "IO duplex: cr is 0x%x\n", cr); - - drv_data->duplex(drv_data); + return; + } - if (drv_data->tx != drv_data->tx_end) - tranf_success = 0; - } else if (drv_data->tx != NULL) { - /* write only half duplex */ - dev_dbg(&drv_data->pdev->dev, - "IO write: cr is 0x%x\n", cr); + /* + * We always use SPI_WRITE mode (transfer starts with TDBR write). + * SPI_READ mode (transfer starts with RDBR read) seems to have + * problems with setting up the output value in TDBR prior to the + * start of the transfer. + */ + write_CTRL(drv_data, cr | BIT_CTL_TXMOD); - drv_data->write(drv_data); + if (chip->pio_interrupt) { + /* SPI irq should have been disabled by now */ - if (drv_data->tx != drv_data->tx_end) - tranf_success = 0; - } else if (drv_data->rx != NULL) { - /* read only half duplex */ - dev_dbg(&drv_data->pdev->dev, - "IO read: cr is 0x%x\n", cr); + /* discard old RX data and clear RXS */ + bfin_spi_dummy_read(drv_data); - drv_data->read(drv_data); - if (drv_data->rx != drv_data->rx_end) - tranf_success = 0; + /* start transfer */ + if (drv_data->tx == NULL) + write_TDBR(drv_data, chip->idle_tx_val); + else { + if (bits_per_word == 8) + write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); + else + write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + drv_data->tx += drv_data->n_bytes; } - if (!tranf_success) { - dev_dbg(&drv_data->pdev->dev, - "IO write error!\n"); - message->state = ERROR_STATE; - } else { - /* Update total byte transfered */ - message->actual_length += drv_data->len_in_bytes; - /* Move to next transfer of this msg */ - message->state = bfin_spi_next_transfer(drv_data); - if (drv_data->cs_change) - bfin_spi_cs_deactive(drv_data, chip); - } - /* Schedule next transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); + /* once TDBR is empty, interrupt is triggered */ + enable_irq(drv_data->spi_irq); + return; + } + + /* IO mode */ + dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); + + if (full_duplex) { + /* full duplex mode */ + BUG_ON((drv_data->tx_end - drv_data->tx) != + (drv_data->rx_end - drv_data->rx)); + dev_dbg(&drv_data->pdev->dev, + "IO duplex: cr is 0x%x\n", cr); + + drv_data->ops->duplex(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->tx != NULL) { + /* write only half duplex */ + dev_dbg(&drv_data->pdev->dev, + "IO write: cr is 0x%x\n", cr); + + drv_data->ops->write(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->rx != NULL) { + /* read only half duplex */ + dev_dbg(&drv_data->pdev->dev, + "IO read: cr is 0x%x\n", cr); + + drv_data->ops->read(drv_data); + if (drv_data->rx != drv_data->rx_end) + tranf_success = 0; + } + + if (!tranf_success) { + dev_dbg(&drv_data->pdev->dev, + "IO write error!\n"); + message->state = ERROR_STATE; + } else { + /* Update total byte transfered */ + message->actual_length += drv_data->len_in_bytes; + /* Move to next transfer of this msg */ + message->state = bfin_spi_next_transfer(drv_data); + if (drv_data->cs_change) + bfin_spi_cs_deactive(drv_data, chip); } + + /* Schedule next transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); } /* pop a msg from queue and kick off real transfer */ static void bfin_spi_pump_messages(struct work_struct *work) { - struct driver_data *drv_data; + struct bfin_spi_master_data *drv_data; unsigned long flags; - drv_data = container_of(work, struct driver_data, pump_messages); + drv_data = container_of(work, struct bfin_spi_master_data, pump_messages); /* Lock queue and check for queue work */ spin_lock_irqsave(&drv_data->lock, flags); - if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { + if (list_empty(&drv_data->queue) || !drv_data->running) { /* pumper kicked off but no work to do */ drv_data->busy = 0; spin_unlock_irqrestore(&drv_data->lock, flags); @@ -962,12 +928,12 @@ static void bfin_spi_pump_messages(struct work_struct *work) */ static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) { - struct driver_data *drv_data = spi_master_get_devdata(spi->master); + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); unsigned long flags; spin_lock_irqsave(&drv_data->lock, flags); - if (drv_data->run == QUEUE_STOPPED) { + if (!drv_data->running) { spin_unlock_irqrestore(&drv_data->lock, flags); return -ESHUTDOWN; } @@ -979,7 +945,7 @@ static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) dev_dbg(&spi->dev, "adding an msg in transfer() \n"); list_add_tail(&msg->queue, &drv_data->queue); - if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) + if (drv_data->running && !drv_data->busy) queue_work(drv_data->workqueue, &drv_data->pump_messages); spin_unlock_irqrestore(&drv_data->lock, flags); @@ -1003,147 +969,184 @@ static u16 ssel[][MAX_SPI_SSEL] = { P_SPI2_SSEL6, P_SPI2_SSEL7}, }; -/* first setup for new devices */ +/* setup for devices (may be called multiple times -- not just first setup) */ static int bfin_spi_setup(struct spi_device *spi) { - struct bfin5xx_spi_chip *chip_info = NULL; - struct chip_data *chip; - struct driver_data *drv_data = spi_master_get_devdata(spi->master); - int ret; - - if (spi->bits_per_word != 8 && spi->bits_per_word != 16) - return -EINVAL; + struct bfin5xx_spi_chip *chip_info; + struct bfin_spi_slave_data *chip = NULL; + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); + u16 bfin_ctl_reg; + int ret = -EINVAL; /* Only alloc (or use chip_info) on first setup */ + chip_info = NULL; chip = spi_get_ctldata(spi); if (chip == NULL) { - chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); - if (!chip) - return -ENOMEM; + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) { + dev_err(&spi->dev, "cannot allocate chip data\n"); + ret = -ENOMEM; + goto error; + } chip->enable_dma = 0; chip_info = spi->controller_data; } + /* Let people set non-standard bits directly */ + bfin_ctl_reg = BIT_CTL_OPENDRAIN | BIT_CTL_EMISO | + BIT_CTL_PSSE | BIT_CTL_GM | BIT_CTL_SZ; + /* chip_info isn't always needed */ if (chip_info) { /* Make sure people stop trying to set fields via ctl_reg * when they should actually be using common SPI framework. - * Currently we let through: WOM EMISO PSSE GM SZ TIMOD. + * Currently we let through: WOM EMISO PSSE GM SZ. * Not sure if a user actually needs/uses any of these, * but let's assume (for now) they do. */ - if (chip_info->ctl_reg & (SPE|MSTR|CPOL|CPHA|LSBF|SIZE)) { + if (chip_info->ctl_reg & ~bfin_ctl_reg) { dev_err(&spi->dev, "do not set bits in ctl_reg " "that the SPI framework manages\n"); - return -EINVAL; + goto error; } - chip->enable_dma = chip_info->enable_dma != 0 && drv_data->master_info->enable_dma; chip->ctl_reg = chip_info->ctl_reg; - chip->bits_per_word = chip_info->bits_per_word; - chip->cs_change_per_word = chip_info->cs_change_per_word; chip->cs_chg_udelay = chip_info->cs_chg_udelay; - chip->cs_gpio = chip_info->cs_gpio; chip->idle_tx_val = chip_info->idle_tx_val; + chip->pio_interrupt = chip_info->pio_interrupt; + spi->bits_per_word = chip_info->bits_per_word; + } else { + /* force a default base state */ + chip->ctl_reg &= bfin_ctl_reg; + } + + if (spi->bits_per_word != 8 && spi->bits_per_word != 16) { + dev_err(&spi->dev, "%d bits_per_word is not supported\n", + spi->bits_per_word); + goto error; } /* translate common spi framework into our register */ + if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) { + dev_err(&spi->dev, "unsupported spi modes detected\n"); + goto error; + } if (spi->mode & SPI_CPOL) - chip->ctl_reg |= CPOL; + chip->ctl_reg |= BIT_CTL_CPOL; if (spi->mode & SPI_CPHA) - chip->ctl_reg |= CPHA; + chip->ctl_reg |= BIT_CTL_CPHA; if (spi->mode & SPI_LSB_FIRST) - chip->ctl_reg |= LSBF; + chip->ctl_reg |= BIT_CTL_LSBF; /* we dont support running in slave mode (yet?) */ - chip->ctl_reg |= MSTR; + chip->ctl_reg |= BIT_CTL_MASTER; /* + * Notice: for blackfin, the speed_hz is the value of register + * SPI_BAUD, not the real baudrate + */ + chip->baud = hz_to_spi_baud(spi->max_speed_hz); + chip->chip_select_num = spi->chip_select; + if (chip->chip_select_num < MAX_CTRL_CS) { + if (!(spi->mode & SPI_CPHA)) + dev_warn(&spi->dev, "Warning: SPI CPHA not set:" + " Slave Select not under software control!\n" + " See Documentation/blackfin/bfin-spi-notes.txt"); + + chip->flag = (1 << spi->chip_select) << 8; + } else + chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS; + + if (chip->enable_dma && chip->pio_interrupt) { + dev_err(&spi->dev, "enable_dma is set, " + "do not set pio_interrupt\n"); + goto error; + } + /* * if any one SPI chip is registered and wants DMA, request the * DMA channel for it */ if (chip->enable_dma && !drv_data->dma_requested) { /* register dma irq handler */ - if (request_dma(drv_data->dma_channel, "BFIN_SPI_DMA") < 0) { - dev_dbg(&spi->dev, + ret = request_dma(drv_data->dma_channel, "BFIN_SPI_DMA"); + if (ret) { + dev_err(&spi->dev, "Unable to request BlackFin SPI DMA channel\n"); - return -ENODEV; + goto error; } - if (set_dma_callback(drv_data->dma_channel, - bfin_spi_dma_irq_handler, drv_data) < 0) { - dev_dbg(&spi->dev, "Unable to set dma callback\n"); - return -EPERM; + drv_data->dma_requested = 1; + + ret = set_dma_callback(drv_data->dma_channel, + bfin_spi_dma_irq_handler, drv_data); + if (ret) { + dev_err(&spi->dev, "Unable to set dma callback\n"); + goto error; } dma_disable_irq(drv_data->dma_channel); - drv_data->dma_requested = 1; } - /* - * Notice: for blackfin, the speed_hz is the value of register - * SPI_BAUD, not the real baudrate - */ - chip->baud = hz_to_spi_baud(spi->max_speed_hz); - chip->flag = 1 << (spi->chip_select); - chip->chip_select_num = spi->chip_select; + if (chip->pio_interrupt && !drv_data->irq_requested) { + ret = request_irq(drv_data->spi_irq, bfin_spi_pio_irq_handler, + IRQF_DISABLED, "BFIN_SPI", drv_data); + if (ret) { + dev_err(&spi->dev, "Unable to register spi IRQ\n"); + goto error; + } + drv_data->irq_requested = 1; + /* we use write mode, spi irq has to be disabled here */ + disable_irq(drv_data->spi_irq); + } - if (chip->chip_select_num == 0) { + if (chip->chip_select_num >= MAX_CTRL_CS) { ret = gpio_request(chip->cs_gpio, spi->modalias); if (ret) { - if (drv_data->dma_requested) - free_dma(drv_data->dma_channel); - return ret; + dev_err(&spi->dev, "gpio_request() error\n"); + goto pin_error; } gpio_direction_output(chip->cs_gpio, 1); } - switch (chip->bits_per_word) { - case 8: - chip->n_bytes = 1; - chip->width = CFG_SPI_WORDSIZE8; - chip->read = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_reader : bfin_spi_u8_reader; - chip->write = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_writer : bfin_spi_u8_writer; - chip->duplex = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_duplex : bfin_spi_u8_duplex; - break; - - case 16: - chip->n_bytes = 2; - chip->width = CFG_SPI_WORDSIZE16; - chip->read = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_reader : bfin_spi_u16_reader; - chip->write = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_writer : bfin_spi_u16_writer; - chip->duplex = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_duplex : bfin_spi_u16_duplex; - break; - - default: - dev_err(&spi->dev, "%d bits_per_word is not supported\n", - chip->bits_per_word); - if (chip_info) - kfree(chip); - return -ENODEV; - } - dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n", - spi->modalias, chip->width, chip->enable_dma); + spi->modalias, spi->bits_per_word, chip->enable_dma); dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n", chip->ctl_reg, chip->flag); spi_set_ctldata(spi, chip); dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num); - if ((chip->chip_select_num > 0) - && (chip->chip_select_num <= spi->master->num_chipselect)) - peripheral_request(ssel[spi->master->bus_num] - [chip->chip_select_num-1], spi->modalias); + if (chip->chip_select_num < MAX_CTRL_CS) { + ret = peripheral_request(ssel[spi->master->bus_num] + [chip->chip_select_num-1], spi->modalias); + if (ret) { + dev_err(&spi->dev, "peripheral_request() error\n"); + goto pin_error; + } + } + bfin_spi_cs_enable(drv_data, chip); bfin_spi_cs_deactive(drv_data, chip); return 0; + + pin_error: + if (chip->chip_select_num >= MAX_CTRL_CS) + gpio_free(chip->cs_gpio); + else + peripheral_free(ssel[spi->master->bus_num] + [chip->chip_select_num - 1]); + error: + if (chip) { + if (drv_data->dma_requested) + free_dma(drv_data->dma_channel); + drv_data->dma_requested = 0; + + kfree(chip); + /* prevent free 'chip' twice */ + spi_set_ctldata(spi, NULL); + } + + return ret; } /* @@ -1152,28 +1155,30 @@ static int bfin_spi_setup(struct spi_device *spi) */ static void bfin_spi_cleanup(struct spi_device *spi) { - struct chip_data *chip = spi_get_ctldata(spi); + struct bfin_spi_slave_data *chip = spi_get_ctldata(spi); + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); if (!chip) return; - if ((chip->chip_select_num > 0) - && (chip->chip_select_num <= spi->master->num_chipselect)) + if (chip->chip_select_num < MAX_CTRL_CS) { peripheral_free(ssel[spi->master->bus_num] [chip->chip_select_num-1]); - - if (chip->chip_select_num == 0) + bfin_spi_cs_disable(drv_data, chip); + } else gpio_free(chip->cs_gpio); kfree(chip); + /* prevent free 'chip' twice */ + spi_set_ctldata(spi, NULL); } -static inline int bfin_spi_init_queue(struct driver_data *drv_data) +static inline int bfin_spi_init_queue(struct bfin_spi_master_data *drv_data) { INIT_LIST_HEAD(&drv_data->queue); spin_lock_init(&drv_data->lock); - drv_data->run = QUEUE_STOPPED; + drv_data->running = false; drv_data->busy = 0; /* init transfer tasklet */ @@ -1190,18 +1195,18 @@ static inline int bfin_spi_init_queue(struct driver_data *drv_data) return 0; } -static inline int bfin_spi_start_queue(struct driver_data *drv_data) +static inline int bfin_spi_start_queue(struct bfin_spi_master_data *drv_data) { unsigned long flags; spin_lock_irqsave(&drv_data->lock, flags); - if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { + if (drv_data->running || drv_data->busy) { spin_unlock_irqrestore(&drv_data->lock, flags); return -EBUSY; } - drv_data->run = QUEUE_RUNNING; + drv_data->running = true; drv_data->cur_msg = NULL; drv_data->cur_transfer = NULL; drv_data->cur_chip = NULL; @@ -1212,7 +1217,7 @@ static inline int bfin_spi_start_queue(struct driver_data *drv_data) return 0; } -static inline int bfin_spi_stop_queue(struct driver_data *drv_data) +static inline int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data) { unsigned long flags; unsigned limit = 500; @@ -1226,7 +1231,7 @@ static inline int bfin_spi_stop_queue(struct driver_data *drv_data) * execution path (pump_messages) would be required to call wake_up or * friends on every SPI message. Do this instead */ - drv_data->run = QUEUE_STOPPED; + drv_data->running = false; while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { spin_unlock_irqrestore(&drv_data->lock, flags); msleep(10); @@ -1241,7 +1246,7 @@ static inline int bfin_spi_stop_queue(struct driver_data *drv_data) return status; } -static inline int bfin_spi_destroy_queue(struct driver_data *drv_data) +static inline int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data) { int status; @@ -1259,14 +1264,14 @@ static int __init bfin_spi_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct bfin5xx_spi_master *platform_info; struct spi_master *master; - struct driver_data *drv_data = 0; + struct bfin_spi_master_data *drv_data; struct resource *res; int status = 0; platform_info = dev->platform_data; /* Allocate master with space for drv_data */ - master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); + master = spi_alloc_master(dev, sizeof(*drv_data)); if (!master) { dev_err(&pdev->dev, "can not alloc spi_master\n"); return -ENOMEM; @@ -1302,11 +1307,19 @@ static int __init bfin_spi_probe(struct platform_device *pdev) goto out_error_ioremap; } - drv_data->dma_channel = platform_get_irq(pdev, 0); - if (drv_data->dma_channel < 0) { + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { dev_err(dev, "No DMA channel specified\n"); status = -ENOENT; - goto out_error_no_dma_ch; + goto out_error_free_io; + } + drv_data->dma_channel = res->start; + + drv_data->spi_irq = platform_get_irq(pdev, 0); + if (drv_data->spi_irq < 0) { + dev_err(dev, "No spi pio irq specified\n"); + status = -ENOENT; + goto out_error_free_io; } /* Initial and start queue */ @@ -1328,6 +1341,12 @@ static int __init bfin_spi_probe(struct platform_device *pdev) goto out_error_queue_alloc; } + /* Reset SPI registers. If these registers were used by the boot loader, + * the sky may fall on your head if you enable the dma controller. + */ + write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); + write_FLAG(drv_data, 0xFF00); + /* Register with the SPI framework */ platform_set_drvdata(pdev, drv_data); status = spi_register_master(master); @@ -1343,7 +1362,7 @@ static int __init bfin_spi_probe(struct platform_device *pdev) out_error_queue_alloc: bfin_spi_destroy_queue(drv_data); -out_error_no_dma_ch: +out_error_free_io: iounmap((void *) drv_data->regs_base); out_error_ioremap: out_error_get_res: @@ -1355,7 +1374,7 @@ out_error_get_res: /* stop hardware and remove the driver */ static int __devexit bfin_spi_remove(struct platform_device *pdev) { - struct driver_data *drv_data = platform_get_drvdata(pdev); + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); int status = 0; if (!drv_data) @@ -1375,6 +1394,11 @@ static int __devexit bfin_spi_remove(struct platform_device *pdev) free_dma(drv_data->dma_channel); } + if (drv_data->irq_requested) { + free_irq(drv_data->spi_irq, drv_data); + drv_data->irq_requested = 0; + } + /* Disconnect from the SPI framework */ spi_unregister_master(drv_data->master); @@ -1389,26 +1413,32 @@ static int __devexit bfin_spi_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) { - struct driver_data *drv_data = platform_get_drvdata(pdev); + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); int status = 0; status = bfin_spi_stop_queue(drv_data); if (status != 0) return status; - /* stop hardware */ - bfin_spi_disable(drv_data); + drv_data->ctrl_reg = read_CTRL(drv_data); + drv_data->flag_reg = read_FLAG(drv_data); + + /* + * reset SPI_CTL and SPI_FLG registers + */ + write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); + write_FLAG(drv_data, 0xFF00); return 0; } static int bfin_spi_resume(struct platform_device *pdev) { - struct driver_data *drv_data = platform_get_drvdata(pdev); + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); int status = 0; - /* Enable the SPI interface */ - bfin_spi_enable(drv_data); + write_CTRL(drv_data, drv_data->ctrl_reg); + write_FLAG(drv_data, drv_data->flag_reg); /* Start the queue running */ status = bfin_spi_start_queue(drv_data); @@ -1439,7 +1469,7 @@ static int __init bfin_spi_init(void) { return platform_driver_probe(&bfin_spi_driver, bfin_spi_probe); } -module_init(bfin_spi_init); +subsys_initcall(bfin_spi_init); static void __exit bfin_spi_exit(void) { diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c new file mode 100644 index 000000000000..e3b4f6451966 --- /dev/null +++ b/drivers/spi/spi_fsl_espi.c @@ -0,0 +1,748 @@ +/* + * Freescale eSPI controller driver. + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/spi/spi.h> +#include <linux/platform_device.h> +#include <linux/fsl_devices.h> +#include <linux/mm.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_spi.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <sysdev/fsl_soc.h> + +#include "spi_fsl_lib.h" + +/* eSPI Controller registers */ +struct fsl_espi_reg { + __be32 mode; /* 0x000 - eSPI mode register */ + __be32 event; /* 0x004 - eSPI event register */ + __be32 mask; /* 0x008 - eSPI mask register */ + __be32 command; /* 0x00c - eSPI command register */ + __be32 transmit; /* 0x010 - eSPI transmit FIFO access register*/ + __be32 receive; /* 0x014 - eSPI receive FIFO access register*/ + u8 res[8]; /* 0x018 - 0x01c reserved */ + __be32 csmode[4]; /* 0x020 - 0x02c eSPI cs mode register */ +}; + +struct fsl_espi_transfer { + const void *tx_buf; + void *rx_buf; + unsigned len; + unsigned n_tx; + unsigned n_rx; + unsigned actual_length; + int status; +}; + +/* eSPI Controller mode register definitions */ +#define SPMODE_ENABLE (1 << 31) +#define SPMODE_LOOP (1 << 30) +#define SPMODE_TXTHR(x) ((x) << 8) +#define SPMODE_RXTHR(x) ((x) << 0) + +/* eSPI Controller CS mode register definitions */ +#define CSMODE_CI_INACTIVEHIGH (1 << 31) +#define CSMODE_CP_BEGIN_EDGECLK (1 << 30) +#define CSMODE_REV (1 << 29) +#define CSMODE_DIV16 (1 << 28) +#define CSMODE_PM(x) ((x) << 24) +#define CSMODE_POL_1 (1 << 20) +#define CSMODE_LEN(x) ((x) << 16) +#define CSMODE_BEF(x) ((x) << 12) +#define CSMODE_AFT(x) ((x) << 8) +#define CSMODE_CG(x) ((x) << 3) + +/* Default mode/csmode for eSPI controller */ +#define SPMODE_INIT_VAL (SPMODE_TXTHR(4) | SPMODE_RXTHR(3)) +#define CSMODE_INIT_VAL (CSMODE_POL_1 | CSMODE_BEF(0) \ + | CSMODE_AFT(0) | CSMODE_CG(1)) + +/* SPIE register values */ +#define SPIE_NE 0x00000200 /* Not empty */ +#define SPIE_NF 0x00000100 /* Not full */ + +/* SPIM register values */ +#define SPIM_NE 0x00000200 /* Not empty */ +#define SPIM_NF 0x00000100 /* Not full */ +#define SPIE_RXCNT(reg) ((reg >> 24) & 0x3F) +#define SPIE_TXCNT(reg) ((reg >> 16) & 0x3F) + +/* SPCOM register values */ +#define SPCOM_CS(x) ((x) << 30) +#define SPCOM_TRANLEN(x) ((x) << 0) +#define SPCOM_TRANLEN_MAX 0xFFFF /* Max transaction length */ + +static void fsl_espi_change_mode(struct spi_device *spi) +{ + struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); + struct spi_mpc8xxx_cs *cs = spi->controller_state; + struct fsl_espi_reg *reg_base = mspi->reg_base; + __be32 __iomem *mode = ®_base->csmode[spi->chip_select]; + __be32 __iomem *espi_mode = ®_base->mode; + u32 tmp; + unsigned long flags; + + /* Turn off IRQs locally to minimize time that SPI is disabled. */ + local_irq_save(flags); + + /* Turn off SPI unit prior changing mode */ + tmp = mpc8xxx_spi_read_reg(espi_mode); + mpc8xxx_spi_write_reg(espi_mode, tmp & ~SPMODE_ENABLE); + mpc8xxx_spi_write_reg(mode, cs->hw_mode); + mpc8xxx_spi_write_reg(espi_mode, tmp); + + local_irq_restore(flags); +} + +static u32 fsl_espi_tx_buf_lsb(struct mpc8xxx_spi *mpc8xxx_spi) +{ + u32 data; + u16 data_h; + u16 data_l; + const u32 *tx = mpc8xxx_spi->tx; + + if (!tx) + return 0; + + data = *tx++ << mpc8xxx_spi->tx_shift; + data_l = data & 0xffff; + data_h = (data >> 16) & 0xffff; + swab16s(&data_l); + swab16s(&data_h); + data = data_h | data_l; + + mpc8xxx_spi->tx = tx; + return data; +} + +static int fsl_espi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + int bits_per_word = 0; + u8 pm; + u32 hz = 0; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } + + /* spi_transfer level calls that work per-word */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + + /* Make sure its a bit width we support [4..16] */ + if ((bits_per_word < 4) || (bits_per_word > 16)) + return -EINVAL; + + if (!hz) + hz = spi->max_speed_hz; + + cs->rx_shift = 0; + cs->tx_shift = 0; + cs->get_rx = mpc8xxx_spi_rx_buf_u32; + cs->get_tx = mpc8xxx_spi_tx_buf_u32; + if (bits_per_word <= 8) { + cs->rx_shift = 8 - bits_per_word; + } else if (bits_per_word <= 16) { + cs->rx_shift = 16 - bits_per_word; + if (spi->mode & SPI_LSB_FIRST) + cs->get_tx = fsl_espi_tx_buf_lsb; + } else { + return -EINVAL; + } + + mpc8xxx_spi->rx_shift = cs->rx_shift; + mpc8xxx_spi->tx_shift = cs->tx_shift; + mpc8xxx_spi->get_rx = cs->get_rx; + mpc8xxx_spi->get_tx = cs->get_tx; + + bits_per_word = bits_per_word - 1; + + /* mask out bits we are going to set */ + cs->hw_mode &= ~(CSMODE_LEN(0xF) | CSMODE_DIV16 | CSMODE_PM(0xF)); + + cs->hw_mode |= CSMODE_LEN(bits_per_word); + + if ((mpc8xxx_spi->spibrg / hz) > 64) { + cs->hw_mode |= CSMODE_DIV16; + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; + + WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " + "Will use %d Hz instead.\n", dev_name(&spi->dev), + hz, mpc8xxx_spi->spibrg / 1024); + if (pm > 16) + pm = 16; + } else { + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; + } + if (pm) + pm--; + + cs->hw_mode |= CSMODE_PM(pm); + + fsl_espi_change_mode(spi); + return 0; +} + +static int fsl_espi_cpu_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, + unsigned int len) +{ + u32 word; + struct fsl_espi_reg *reg_base = mspi->reg_base; + + mspi->count = len; + + /* enable rx ints */ + mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); + + /* transmit word */ + word = mspi->get_tx(mspi); + mpc8xxx_spi_write_reg(®_base->transmit, word); + + return 0; +} + +static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + struct fsl_espi_reg *reg_base = mpc8xxx_spi->reg_base; + unsigned int len = t->len; + u8 bits_per_word; + int ret; + + bits_per_word = spi->bits_per_word; + if (t->bits_per_word) + bits_per_word = t->bits_per_word; + + mpc8xxx_spi->len = t->len; + len = roundup(len, 4) / 4; + + mpc8xxx_spi->tx = t->tx_buf; + mpc8xxx_spi->rx = t->rx_buf; + + INIT_COMPLETION(mpc8xxx_spi->done); + + /* Set SPCOM[CS] and SPCOM[TRANLEN] field */ + if ((t->len - 1) > SPCOM_TRANLEN_MAX) { + dev_err(mpc8xxx_spi->dev, "Transaction length (%d)" + " beyond the SPCOM[TRANLEN] field\n", t->len); + return -EINVAL; + } + mpc8xxx_spi_write_reg(®_base->command, + (SPCOM_CS(spi->chip_select) | SPCOM_TRANLEN(t->len - 1))); + + ret = fsl_espi_cpu_bufs(mpc8xxx_spi, t, len); + if (ret) + return ret; + + wait_for_completion(&mpc8xxx_spi->done); + + /* disable rx ints */ + mpc8xxx_spi_write_reg(®_base->mask, 0); + + return mpc8xxx_spi->count; +} + +static void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd) +{ + if (cmd[1] && cmd[2] && cmd[3]) { + cmd[1] = (u8)(addr >> 16); + cmd[2] = (u8)(addr >> 8); + cmd[3] = (u8)(addr >> 0); + } +} + +static unsigned int fsl_espi_cmd2addr(u8 *cmd) +{ + if (cmd[1] && cmd[2] && cmd[3]) + return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0; + + return 0; +} + +static void fsl_espi_do_trans(struct spi_message *m, + struct fsl_espi_transfer *tr) +{ + struct spi_device *spi = m->spi; + struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); + struct fsl_espi_transfer *espi_trans = tr; + struct spi_message message; + struct spi_transfer *t, *first, trans; + int status = 0; + + spi_message_init(&message); + memset(&trans, 0, sizeof(trans)); + + first = list_first_entry(&m->transfers, struct spi_transfer, + transfer_list); + list_for_each_entry(t, &m->transfers, transfer_list) { + if ((first->bits_per_word != t->bits_per_word) || + (first->speed_hz != t->speed_hz)) { + espi_trans->status = -EINVAL; + dev_err(mspi->dev, "bits_per_word/speed_hz should be" + " same for the same SPI transfer\n"); + return; + } + + trans.speed_hz = t->speed_hz; + trans.bits_per_word = t->bits_per_word; + trans.delay_usecs = max(first->delay_usecs, t->delay_usecs); + } + + trans.len = espi_trans->len; + trans.tx_buf = espi_trans->tx_buf; + trans.rx_buf = espi_trans->rx_buf; + spi_message_add_tail(&trans, &message); + + list_for_each_entry(t, &message.transfers, transfer_list) { + if (t->bits_per_word || t->speed_hz) { + status = -EINVAL; + + status = fsl_espi_setup_transfer(spi, t); + if (status < 0) + break; + } + + if (t->len) + status = fsl_espi_bufs(spi, t); + + if (status) { + status = -EMSGSIZE; + break; + } + + if (t->delay_usecs) + udelay(t->delay_usecs); + } + + espi_trans->status = status; + fsl_espi_setup_transfer(spi, NULL); +} + +static void fsl_espi_cmd_trans(struct spi_message *m, + struct fsl_espi_transfer *trans, u8 *rx_buff) +{ + struct spi_transfer *t; + u8 *local_buf; + int i = 0; + struct fsl_espi_transfer *espi_trans = trans; + + local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); + if (!local_buf) { + espi_trans->status = -ENOMEM; + return; + } + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) { + memcpy(local_buf + i, t->tx_buf, t->len); + i += t->len; + } + } + + espi_trans->tx_buf = local_buf; + espi_trans->rx_buf = local_buf + espi_trans->n_tx; + fsl_espi_do_trans(m, espi_trans); + + espi_trans->actual_length = espi_trans->len; + kfree(local_buf); +} + +static void fsl_espi_rw_trans(struct spi_message *m, + struct fsl_espi_transfer *trans, u8 *rx_buff) +{ + struct fsl_espi_transfer *espi_trans = trans; + unsigned int n_tx = espi_trans->n_tx; + unsigned int n_rx = espi_trans->n_rx; + struct spi_transfer *t; + u8 *local_buf; + u8 *rx_buf = rx_buff; + unsigned int trans_len; + unsigned int addr; + int i, pos, loop; + + local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); + if (!local_buf) { + espi_trans->status = -ENOMEM; + return; + } + + for (pos = 0, loop = 0; pos < n_rx; pos += trans_len, loop++) { + trans_len = n_rx - pos; + if (trans_len > SPCOM_TRANLEN_MAX - n_tx) + trans_len = SPCOM_TRANLEN_MAX - n_tx; + + i = 0; + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) { + memcpy(local_buf + i, t->tx_buf, t->len); + i += t->len; + } + } + + addr = fsl_espi_cmd2addr(local_buf); + addr += pos; + fsl_espi_addr2cmd(addr, local_buf); + + espi_trans->n_tx = n_tx; + espi_trans->n_rx = trans_len; + espi_trans->len = trans_len + n_tx; + espi_trans->tx_buf = local_buf; + espi_trans->rx_buf = local_buf + n_tx; + fsl_espi_do_trans(m, espi_trans); + + memcpy(rx_buf + pos, espi_trans->rx_buf + n_tx, trans_len); + + if (loop > 0) + espi_trans->actual_length += espi_trans->len - n_tx; + else + espi_trans->actual_length += espi_trans->len; + } + + kfree(local_buf); +} + +static void fsl_espi_do_one_msg(struct spi_message *m) +{ + struct spi_transfer *t; + u8 *rx_buf = NULL; + unsigned int n_tx = 0; + unsigned int n_rx = 0; + struct fsl_espi_transfer espi_trans; + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) + n_tx += t->len; + if (t->rx_buf) { + n_rx += t->len; + rx_buf = t->rx_buf; + } + } + + espi_trans.n_tx = n_tx; + espi_trans.n_rx = n_rx; + espi_trans.len = n_tx + n_rx; + espi_trans.actual_length = 0; + espi_trans.status = 0; + + if (!rx_buf) + fsl_espi_cmd_trans(m, &espi_trans, NULL); + else + fsl_espi_rw_trans(m, &espi_trans, rx_buf); + + m->actual_length = espi_trans.actual_length; + m->status = espi_trans.status; + m->complete(m->context); +} + +static int fsl_espi_setup(struct spi_device *spi) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_espi_reg *reg_base; + int retval; + u32 hw_mode; + u32 loop_mode; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (!spi->max_speed_hz) + return -EINVAL; + + if (!cs) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + + mpc8xxx_spi = spi_master_get_devdata(spi->master); + reg_base = mpc8xxx_spi->reg_base; + + hw_mode = cs->hw_mode; /* Save orginal settings */ + cs->hw_mode = mpc8xxx_spi_read_reg( + ®_base->csmode[spi->chip_select]); + /* mask out bits we are going to set */ + cs->hw_mode &= ~(CSMODE_CP_BEGIN_EDGECLK | CSMODE_CI_INACTIVEHIGH + | CSMODE_REV); + + if (spi->mode & SPI_CPHA) + cs->hw_mode |= CSMODE_CP_BEGIN_EDGECLK; + if (spi->mode & SPI_CPOL) + cs->hw_mode |= CSMODE_CI_INACTIVEHIGH; + if (!(spi->mode & SPI_LSB_FIRST)) + cs->hw_mode |= CSMODE_REV; + + /* Handle the loop mode */ + loop_mode = mpc8xxx_spi_read_reg(®_base->mode); + loop_mode &= ~SPMODE_LOOP; + if (spi->mode & SPI_LOOP) + loop_mode |= SPMODE_LOOP; + mpc8xxx_spi_write_reg(®_base->mode, loop_mode); + + retval = fsl_espi_setup_transfer(spi, NULL); + if (retval < 0) { + cs->hw_mode = hw_mode; /* Restore settings */ + return retval; + } + return 0; +} + +void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) +{ + struct fsl_espi_reg *reg_base = mspi->reg_base; + + /* We need handle RX first */ + if (events & SPIE_NE) { + u32 rx_data; + + /* Spin until RX is done */ + while (SPIE_RXCNT(events) < min(4, mspi->len)) { + cpu_relax(); + events = mpc8xxx_spi_read_reg(®_base->event); + } + mspi->len -= 4; + + rx_data = mpc8xxx_spi_read_reg(®_base->receive); + + if (mspi->rx) + mspi->get_rx(rx_data, mspi); + } + + if (!(events & SPIE_NF)) { + int ret; + + /* spin until TX is done */ + ret = spin_event_timeout(((events = mpc8xxx_spi_read_reg( + ®_base->event)) & SPIE_NF) == 0, 1000, 0); + if (!ret) { + dev_err(mspi->dev, "tired waiting for SPIE_NF\n"); + return; + } + } + + /* Clear the events */ + mpc8xxx_spi_write_reg(®_base->event, events); + + mspi->count -= 1; + if (mspi->count) { + u32 word = mspi->get_tx(mspi); + + mpc8xxx_spi_write_reg(®_base->transmit, word); + } else { + complete(&mspi->done); + } +} + +static irqreturn_t fsl_espi_irq(s32 irq, void *context_data) +{ + struct mpc8xxx_spi *mspi = context_data; + struct fsl_espi_reg *reg_base = mspi->reg_base; + irqreturn_t ret = IRQ_NONE; + u32 events; + + /* Get interrupt events(tx/rx) */ + events = mpc8xxx_spi_read_reg(®_base->event); + if (events) + ret = IRQ_HANDLED; + + dev_vdbg(mspi->dev, "%s: events %x\n", __func__, events); + + fsl_espi_cpu_irq(mspi, events); + + return ret; +} + +static void fsl_espi_remove(struct mpc8xxx_spi *mspi) +{ + iounmap(mspi->reg_base); +} + +static struct spi_master * __devinit fsl_espi_probe(struct device *dev, + struct resource *mem, unsigned int irq) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct spi_master *master; + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_espi_reg *reg_base; + u32 regval; + int i, ret = 0; + + master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi)); + if (!master) { + ret = -ENOMEM; + goto err; + } + + dev_set_drvdata(dev, master); + + ret = mpc8xxx_spi_probe(dev, mem, irq); + if (ret) + goto err_probe; + + master->setup = fsl_espi_setup; + + mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi->spi_do_one_msg = fsl_espi_do_one_msg; + mpc8xxx_spi->spi_remove = fsl_espi_remove; + + mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); + if (!mpc8xxx_spi->reg_base) { + ret = -ENOMEM; + goto err_probe; + } + + reg_base = mpc8xxx_spi->reg_base; + + /* Register for SPI Interrupt */ + ret = request_irq(mpc8xxx_spi->irq, fsl_espi_irq, + 0, "fsl_espi", mpc8xxx_spi); + if (ret) + goto free_irq; + + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { + mpc8xxx_spi->rx_shift = 16; + mpc8xxx_spi->tx_shift = 24; + } + + /* SPI controller initializations */ + mpc8xxx_spi_write_reg(®_base->mode, 0); + mpc8xxx_spi_write_reg(®_base->mask, 0); + mpc8xxx_spi_write_reg(®_base->command, 0); + mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); + + /* Init eSPI CS mode register */ + for (i = 0; i < pdata->max_chipselect; i++) + mpc8xxx_spi_write_reg(®_base->csmode[i], CSMODE_INIT_VAL); + + /* Enable SPI interface */ + regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; + + mpc8xxx_spi_write_reg(®_base->mode, regval); + + ret = spi_register_master(master); + if (ret < 0) + goto unreg_master; + + dev_info(dev, "at 0x%p (irq = %d)\n", reg_base, mpc8xxx_spi->irq); + + return master; + +unreg_master: + free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); +free_irq: + iounmap(mpc8xxx_spi->reg_base); +err_probe: + spi_master_put(master); +err: + return ERR_PTR(ret); +} + +static int of_fsl_espi_get_chipselects(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct fsl_spi_platform_data *pdata = dev->platform_data; + const u32 *prop; + int len; + + prop = of_get_property(np, "fsl,espi-num-chipselects", &len); + if (!prop || len < sizeof(*prop)) { + dev_err(dev, "No 'fsl,espi-num-chipselects' property\n"); + return -EINVAL; + } + + pdata->max_chipselect = *prop; + pdata->cs_control = NULL; + + return 0; +} + +static int __devinit of_fsl_espi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->dev.of_node; + struct spi_master *master; + struct resource mem; + struct resource irq; + int ret = -ENOMEM; + + ret = of_mpc8xxx_spi_probe(ofdev, ofid); + if (ret) + return ret; + + ret = of_fsl_espi_get_chipselects(dev); + if (ret) + goto err; + + ret = of_address_to_resource(np, 0, &mem); + if (ret) + goto err; + + ret = of_irq_to_resource(np, 0, &irq); + if (!ret) { + ret = -EINVAL; + goto err; + } + + master = fsl_espi_probe(dev, &mem, irq.start); + if (IS_ERR(master)) { + ret = PTR_ERR(master); + goto err; + } + + return 0; + +err: + return ret; +} + +static int __devexit of_fsl_espi_remove(struct platform_device *dev) +{ + return mpc8xxx_spi_remove(&dev->dev); +} + +static const struct of_device_id of_fsl_espi_match[] = { + { .compatible = "fsl,mpc8536-espi" }, + {} +}; +MODULE_DEVICE_TABLE(of, of_fsl_espi_match); + +static struct of_platform_driver fsl_espi_driver = { + .driver = { + .name = "fsl_espi", + .owner = THIS_MODULE, + .of_match_table = of_fsl_espi_match, + }, + .probe = of_fsl_espi_probe, + .remove = __devexit_p(of_fsl_espi_remove), +}; + +static int __init fsl_espi_init(void) +{ + return of_register_platform_driver(&fsl_espi_driver); +} +module_init(fsl_espi_init); + +static void __exit fsl_espi_exit(void) +{ + of_unregister_platform_driver(&fsl_espi_driver); +} +module_exit(fsl_espi_exit); + +MODULE_AUTHOR("Mingkai Hu"); +MODULE_DESCRIPTION("Enhanced Freescale SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_fsl_lib.c b/drivers/spi/spi_fsl_lib.c new file mode 100644 index 000000000000..5cd741fdb5c3 --- /dev/null +++ b/drivers/spi/spi_fsl_lib.c @@ -0,0 +1,237 @@ +/* + * Freescale SPI/eSPI controller driver library. + * + * Maintainer: Kumar Gala + * + * Copyright (C) 2006 Polycom, Inc. + * + * CPM SPI and QE buffer descriptors mode support: + * Copyright (c) 2009 MontaVista Software, Inc. + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/fsl_devices.h> +#include <linux/dma-mapping.h> +#include <linux/mm.h> +#include <linux/of_platform.h> +#include <linux/of_spi.h> +#include <sysdev/fsl_soc.h> + +#include "spi_fsl_lib.h" + +#define MPC8XXX_SPI_RX_BUF(type) \ +void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ +{ \ + type *rx = mpc8xxx_spi->rx; \ + *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ + mpc8xxx_spi->rx = rx; \ +} + +#define MPC8XXX_SPI_TX_BUF(type) \ +u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ +{ \ + u32 data; \ + const type *tx = mpc8xxx_spi->tx; \ + if (!tx) \ + return 0; \ + data = *tx++ << mpc8xxx_spi->tx_shift; \ + mpc8xxx_spi->tx = tx; \ + return data; \ +} + +MPC8XXX_SPI_RX_BUF(u8) +MPC8XXX_SPI_RX_BUF(u16) +MPC8XXX_SPI_RX_BUF(u32) +MPC8XXX_SPI_TX_BUF(u8) +MPC8XXX_SPI_TX_BUF(u16) +MPC8XXX_SPI_TX_BUF(u32) + +struct mpc8xxx_spi_probe_info *to_of_pinfo(struct fsl_spi_platform_data *pdata) +{ + return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); +} + +void mpc8xxx_spi_work(struct work_struct *work) +{ + struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, + work); + + spin_lock_irq(&mpc8xxx_spi->lock); + while (!list_empty(&mpc8xxx_spi->queue)) { + struct spi_message *m = container_of(mpc8xxx_spi->queue.next, + struct spi_message, queue); + + list_del_init(&m->queue); + spin_unlock_irq(&mpc8xxx_spi->lock); + + if (mpc8xxx_spi->spi_do_one_msg) + mpc8xxx_spi->spi_do_one_msg(m); + + spin_lock_irq(&mpc8xxx_spi->lock); + } + spin_unlock_irq(&mpc8xxx_spi->lock); +} + +int mpc8xxx_spi_transfer(struct spi_device *spi, + struct spi_message *m) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + unsigned long flags; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + spin_lock_irqsave(&mpc8xxx_spi->lock, flags); + list_add_tail(&m->queue, &mpc8xxx_spi->queue); + queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); + spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); + + return 0; +} + +void mpc8xxx_spi_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +const char *mpc8xxx_spi_strmode(unsigned int flags) +{ + if (flags & SPI_QE_CPU_MODE) { + return "QE CPU"; + } else if (flags & SPI_CPM_MODE) { + if (flags & SPI_QE) + return "QE"; + else if (flags & SPI_CPM2) + return "CPM2"; + else + return "CPM1"; + } + return "CPU"; +} + +int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, + unsigned int irq) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct spi_master *master; + struct mpc8xxx_spi *mpc8xxx_spi; + int ret = 0; + + master = dev_get_drvdata(dev); + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH + | SPI_LSB_FIRST | SPI_LOOP; + + master->transfer = mpc8xxx_spi_transfer; + master->cleanup = mpc8xxx_spi_cleanup; + master->dev.of_node = dev->of_node; + + mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi->dev = dev; + mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; + mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; + mpc8xxx_spi->flags = pdata->flags; + mpc8xxx_spi->spibrg = pdata->sysclk; + mpc8xxx_spi->irq = irq; + + mpc8xxx_spi->rx_shift = 0; + mpc8xxx_spi->tx_shift = 0; + + init_completion(&mpc8xxx_spi->done); + + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->max_chipselect; + + spin_lock_init(&mpc8xxx_spi->lock); + init_completion(&mpc8xxx_spi->done); + INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); + INIT_LIST_HEAD(&mpc8xxx_spi->queue); + + mpc8xxx_spi->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (mpc8xxx_spi->workqueue == NULL) { + ret = -EBUSY; + goto err; + } + + return 0; + +err: + return ret; +} + +int __devexit mpc8xxx_spi_remove(struct device *dev) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct spi_master *master; + + master = dev_get_drvdata(dev); + mpc8xxx_spi = spi_master_get_devdata(master); + + flush_workqueue(mpc8xxx_spi->workqueue); + destroy_workqueue(mpc8xxx_spi->workqueue); + spi_unregister_master(master); + + free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); + + if (mpc8xxx_spi->spi_remove) + mpc8xxx_spi->spi_remove(mpc8xxx_spi); + + return 0; +} + +int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->dev.of_node; + struct mpc8xxx_spi_probe_info *pinfo; + struct fsl_spi_platform_data *pdata; + const void *prop; + int ret = -ENOMEM; + + pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); + if (!pinfo) + return -ENOMEM; + + pdata = &pinfo->pdata; + dev->platform_data = pdata; + + /* Allocate bus num dynamically. */ + pdata->bus_num = -1; + + /* SPI controller is either clocked from QE or SoC clock. */ + pdata->sysclk = get_brgfreq(); + if (pdata->sysclk == -1) { + pdata->sysclk = fsl_get_sys_freq(); + if (pdata->sysclk == -1) { + ret = -ENODEV; + goto err; + } + } + + prop = of_get_property(np, "mode", NULL); + if (prop && !strcmp(prop, "cpu-qe")) + pdata->flags = SPI_QE_CPU_MODE; + else if (prop && !strcmp(prop, "qe")) + pdata->flags = SPI_CPM_MODE | SPI_QE; + else if (of_device_is_compatible(np, "fsl,cpm2-spi")) + pdata->flags = SPI_CPM_MODE | SPI_CPM2; + else if (of_device_is_compatible(np, "fsl,cpm1-spi")) + pdata->flags = SPI_CPM_MODE | SPI_CPM1; + + return 0; + +err: + kfree(pinfo); + return ret; +} diff --git a/drivers/spi/spi_fsl_lib.h b/drivers/spi/spi_fsl_lib.h new file mode 100644 index 000000000000..281e060977cd --- /dev/null +++ b/drivers/spi/spi_fsl_lib.h @@ -0,0 +1,124 @@ +/* + * Freescale SPI/eSPI controller driver library. + * + * Maintainer: Kumar Gala + * + * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2006 Polycom, Inc. + * + * CPM SPI and QE buffer descriptors mode support: + * Copyright (c) 2009 MontaVista Software, Inc. + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __SPI_FSL_LIB_H__ +#define __SPI_FSL_LIB_H__ + +#include <asm/io.h> + +/* SPI/eSPI Controller driver's private data. */ +struct mpc8xxx_spi { + struct device *dev; + void *reg_base; + + /* rx & tx bufs from the spi_transfer */ + const void *tx; + void *rx; +#ifdef CONFIG_SPI_FSL_ESPI + int len; +#endif + + int subblock; + struct spi_pram __iomem *pram; + struct cpm_buf_desc __iomem *tx_bd; + struct cpm_buf_desc __iomem *rx_bd; + + struct spi_transfer *xfer_in_progress; + + /* dma addresses for CPM transfers */ + dma_addr_t tx_dma; + dma_addr_t rx_dma; + bool map_tx_dma; + bool map_rx_dma; + + dma_addr_t dma_dummy_tx; + dma_addr_t dma_dummy_rx; + + /* functions to deal with different sized buffers */ + void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); + u32(*get_tx) (struct mpc8xxx_spi *); + + /* hooks for different controller driver */ + void (*spi_do_one_msg) (struct spi_message *m); + void (*spi_remove) (struct mpc8xxx_spi *mspi); + + unsigned int count; + unsigned int irq; + + unsigned nsecs; /* (clock cycle time)/2 */ + + u32 spibrg; /* SPIBRG input clock */ + u32 rx_shift; /* RX data reg shift when in qe mode */ + u32 tx_shift; /* TX data reg shift when in qe mode */ + + unsigned int flags; + + struct workqueue_struct *workqueue; + struct work_struct work; + + struct list_head queue; + spinlock_t lock; + + struct completion done; +}; + +struct spi_mpc8xxx_cs { + /* functions to deal with different sized buffers */ + void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); + u32 (*get_tx) (struct mpc8xxx_spi *); + u32 rx_shift; /* RX data reg shift when in qe mode */ + u32 tx_shift; /* TX data reg shift when in qe mode */ + u32 hw_mode; /* Holds HW mode register settings */ +}; + +static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) +{ + out_be32(reg, val); +} + +static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) +{ + return in_be32(reg); +} + +struct mpc8xxx_spi_probe_info { + struct fsl_spi_platform_data pdata; + int *gpios; + bool *alow_flags; +}; + +extern u32 mpc8xxx_spi_tx_buf_u8(struct mpc8xxx_spi *mpc8xxx_spi); +extern u32 mpc8xxx_spi_tx_buf_u16(struct mpc8xxx_spi *mpc8xxx_spi); +extern u32 mpc8xxx_spi_tx_buf_u32(struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u8(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u16(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u32(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); + +extern struct mpc8xxx_spi_probe_info *to_of_pinfo( + struct fsl_spi_platform_data *pdata); +extern int mpc8xxx_spi_bufs(struct mpc8xxx_spi *mspi, + struct spi_transfer *t, unsigned int len); +extern int mpc8xxx_spi_transfer(struct spi_device *spi, struct spi_message *m); +extern void mpc8xxx_spi_cleanup(struct spi_device *spi); +extern const char *mpc8xxx_spi_strmode(unsigned int flags); +extern int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, + unsigned int irq); +extern int mpc8xxx_spi_remove(struct device *dev); +extern int of_mpc8xxx_spi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid); + +#endif /* __SPI_FSL_LIB_H__ */ diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_fsl_spi.c index 1dd86b835cd8..7ca52d3ae8f8 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_fsl_spi.c @@ -1,9 +1,10 @@ /* - * MPC8xxx SPI controller driver. + * Freescale SPI controller driver. * * Maintainer: Kumar Gala * * Copyright (C) 2006 Polycom, Inc. + * Copyright 2010 Freescale Semiconductor, Inc. * * CPM SPI and QE buffer descriptors mode support: * Copyright (c) 2009 MontaVista Software, Inc. @@ -15,18 +16,11 @@ * option) any later version. */ #include <linux/module.h> -#include <linux/init.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/bug.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/completion.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/irq.h> -#include <linux/device.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> #include <linux/platform_device.h> @@ -38,12 +32,12 @@ #include <linux/of_platform.h> #include <linux/gpio.h> #include <linux/of_gpio.h> -#include <linux/slab.h> #include <sysdev/fsl_soc.h> #include <asm/cpm.h> #include <asm/qe.h> -#include <asm/irq.h> + +#include "spi_fsl_lib.h" /* CPM1 and CPM2 are mutually exclusive. */ #ifdef CONFIG_CPM1 @@ -55,7 +49,7 @@ #endif /* SPI Controller registers */ -struct mpc8xxx_spi_reg { +struct fsl_spi_reg { u8 res1[0x20]; __be32 mode; __be32 event; @@ -80,7 +74,7 @@ struct mpc8xxx_spi_reg { /* * Default for SPI Mode: - * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk + * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk */ #define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \ SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf)) @@ -102,112 +96,16 @@ struct mpc8xxx_spi_reg { #define SPI_PRAM_SIZE 0x100 #define SPI_MRBLR ((unsigned int)PAGE_SIZE) -/* SPI Controller driver's private data. */ -struct mpc8xxx_spi { - struct device *dev; - struct mpc8xxx_spi_reg __iomem *base; - - /* rx & tx bufs from the spi_transfer */ - const void *tx; - void *rx; - - int subblock; - struct spi_pram __iomem *pram; - struct cpm_buf_desc __iomem *tx_bd; - struct cpm_buf_desc __iomem *rx_bd; - - struct spi_transfer *xfer_in_progress; - - /* dma addresses for CPM transfers */ - dma_addr_t tx_dma; - dma_addr_t rx_dma; - bool map_tx_dma; - bool map_rx_dma; - - dma_addr_t dma_dummy_tx; - dma_addr_t dma_dummy_rx; - - /* functions to deal with different sized buffers */ - void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); - u32(*get_tx) (struct mpc8xxx_spi *); - - unsigned int count; - unsigned int irq; - - unsigned nsecs; /* (clock cycle time)/2 */ - - u32 spibrg; /* SPIBRG input clock */ - u32 rx_shift; /* RX data reg shift when in qe mode */ - u32 tx_shift; /* TX data reg shift when in qe mode */ - - unsigned int flags; - - struct workqueue_struct *workqueue; - struct work_struct work; - - struct list_head queue; - spinlock_t lock; - - struct completion done; -}; - -static void *mpc8xxx_dummy_rx; -static DEFINE_MUTEX(mpc8xxx_dummy_rx_lock); -static int mpc8xxx_dummy_rx_refcnt; - -struct spi_mpc8xxx_cs { - /* functions to deal with different sized buffers */ - void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); - u32 (*get_tx) (struct mpc8xxx_spi *); - u32 rx_shift; /* RX data reg shift when in qe mode */ - u32 tx_shift; /* TX data reg shift when in qe mode */ - u32 hw_mode; /* Holds HW mode register settings */ -}; - -static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) -{ - out_be32(reg, val); -} - -static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) -{ - return in_be32(reg); -} - -#define MPC83XX_SPI_RX_BUF(type) \ -static \ -void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ -{ \ - type *rx = mpc8xxx_spi->rx; \ - *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ - mpc8xxx_spi->rx = rx; \ -} - -#define MPC83XX_SPI_TX_BUF(type) \ -static \ -u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ -{ \ - u32 data; \ - const type *tx = mpc8xxx_spi->tx; \ - if (!tx) \ - return 0; \ - data = *tx++ << mpc8xxx_spi->tx_shift; \ - mpc8xxx_spi->tx = tx; \ - return data; \ -} +static void *fsl_dummy_rx; +static DEFINE_MUTEX(fsl_dummy_rx_lock); +static int fsl_dummy_rx_refcnt; -MPC83XX_SPI_RX_BUF(u8) -MPC83XX_SPI_RX_BUF(u16) -MPC83XX_SPI_RX_BUF(u32) -MPC83XX_SPI_TX_BUF(u8) -MPC83XX_SPI_TX_BUF(u16) -MPC83XX_SPI_TX_BUF(u32) - -static void mpc8xxx_spi_change_mode(struct spi_device *spi) +static void fsl_spi_change_mode(struct spi_device *spi) { struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); struct spi_mpc8xxx_cs *cs = spi->controller_state; - __be32 __iomem *mode = &mspi->base->mode; + struct fsl_spi_reg *reg_base = mspi->reg_base; + __be32 __iomem *mode = ®_base->mode; unsigned long flags; if (cs->hw_mode == mpc8xxx_spi_read_reg(mode)) @@ -238,7 +136,7 @@ static void mpc8xxx_spi_change_mode(struct spi_device *spi) local_irq_restore(flags); } -static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) +static void fsl_spi_chipselect(struct spi_device *spi, int value) { struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data; @@ -256,18 +154,17 @@ static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) mpc8xxx_spi->get_rx = cs->get_rx; mpc8xxx_spi->get_tx = cs->get_tx; - mpc8xxx_spi_change_mode(spi); + fsl_spi_change_mode(spi); if (pdata->cs_control) pdata->cs_control(spi, pol); } } -static int -mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - struct mpc8xxx_spi *mpc8xxx_spi, - int bits_per_word) +static int mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, + struct spi_device *spi, + struct mpc8xxx_spi *mpc8xxx_spi, + int bits_per_word) { cs->rx_shift = 0; cs->tx_shift = 0; @@ -307,10 +204,9 @@ mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, return bits_per_word; } -static int -mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - int bits_per_word) +static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, + struct spi_device *spi, + int bits_per_word) { /* QE uses Little Endian for words > 8 * so transform all words > 8 into 8 bits @@ -326,13 +222,13 @@ mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, return bits_per_word; } -static -int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) +static int fsl_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) { struct mpc8xxx_spi *mpc8xxx_spi; - int bits_per_word; + int bits_per_word = 0; u8 pm; - u32 hz; + u32 hz = 0; struct spi_mpc8xxx_cs *cs = spi->controller_state; mpc8xxx_spi = spi_master_get_devdata(spi->master); @@ -340,9 +236,6 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) if (t) { bits_per_word = t->bits_per_word; hz = t->speed_hz; - } else { - bits_per_word = 0; - hz = 0; } /* spi_transfer level calls that work per-word */ @@ -388,23 +281,25 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) hz, mpc8xxx_spi->spibrg / 1024); if (pm > 16) pm = 16; - } else + } else { pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; + } if (pm) pm--; cs->hw_mode |= SPMODE_PM(pm); - mpc8xxx_spi_change_mode(spi); + fsl_spi_change_mode(spi); return 0; } -static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) +static void fsl_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) { struct cpm_buf_desc __iomem *tx_bd = mspi->tx_bd; struct cpm_buf_desc __iomem *rx_bd = mspi->rx_bd; unsigned int xfer_len = min(mspi->count, SPI_MRBLR); unsigned int xfer_ofs; + struct fsl_spi_reg *reg_base = mspi->reg_base; xfer_ofs = mspi->xfer_in_progress->len - mspi->count; @@ -424,13 +319,14 @@ static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) BD_SC_LAST); /* start transfer */ - mpc8xxx_spi_write_reg(&mspi->base->command, SPCOM_STR); + mpc8xxx_spi_write_reg(®_base->command, SPCOM_STR); } -static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi, +static int fsl_spi_cpm_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, bool is_dma_mapped) { struct device *dev = mspi->dev; + struct fsl_spi_reg *reg_base = mspi->reg_base; if (is_dma_mapped) { mspi->map_tx_dma = 0; @@ -475,13 +371,13 @@ static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi, } /* enable rx ints */ - mpc8xxx_spi_write_reg(&mspi->base->mask, SPIE_RXB); + mpc8xxx_spi_write_reg(®_base->mask, SPIE_RXB); mspi->xfer_in_progress = t; mspi->count = t->len; /* start CPM transfers */ - mpc8xxx_spi_cpm_bufs_start(mspi); + fsl_spi_cpm_bufs_start(mspi); return 0; @@ -491,7 +387,7 @@ err_rx_dma: return -ENOMEM; } -static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) +static void fsl_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; struct spi_transfer *t = mspi->xfer_in_progress; @@ -503,31 +399,34 @@ static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) mspi->xfer_in_progress = NULL; } -static int mpc8xxx_spi_cpu_bufs(struct mpc8xxx_spi *mspi, +static int fsl_spi_cpu_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, unsigned int len) { u32 word; + struct fsl_spi_reg *reg_base = mspi->reg_base; mspi->count = len; /* enable rx ints */ - mpc8xxx_spi_write_reg(&mspi->base->mask, SPIM_NE); + mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); /* transmit word */ word = mspi->get_tx(mspi); - mpc8xxx_spi_write_reg(&mspi->base->transmit, word); + mpc8xxx_spi_write_reg(®_base->transmit, word); return 0; } -static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t, +static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t, bool is_dma_mapped) { struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + struct fsl_spi_reg *reg_base; unsigned int len = t->len; u8 bits_per_word; int ret; + reg_base = mpc8xxx_spi->reg_base; bits_per_word = spi->bits_per_word; if (t->bits_per_word) bits_per_word = t->bits_per_word; @@ -551,24 +450,24 @@ static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t, INIT_COMPLETION(mpc8xxx_spi->done); if (mpc8xxx_spi->flags & SPI_CPM_MODE) - ret = mpc8xxx_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); + ret = fsl_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); else - ret = mpc8xxx_spi_cpu_bufs(mpc8xxx_spi, t, len); + ret = fsl_spi_cpu_bufs(mpc8xxx_spi, t, len); if (ret) return ret; wait_for_completion(&mpc8xxx_spi->done); /* disable rx ints */ - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); + mpc8xxx_spi_write_reg(®_base->mask, 0); if (mpc8xxx_spi->flags & SPI_CPM_MODE) - mpc8xxx_spi_cpm_bufs_complete(mpc8xxx_spi); + fsl_spi_cpm_bufs_complete(mpc8xxx_spi); return mpc8xxx_spi->count; } -static void mpc8xxx_spi_do_one_msg(struct spi_message *m) +static void fsl_spi_do_one_msg(struct spi_message *m) { struct spi_device *spi = m->spi; struct spi_transfer *t; @@ -584,18 +483,18 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) status = -EINVAL; if (cs_change) - status = mpc8xxx_spi_setup_transfer(spi, t); + status = fsl_spi_setup_transfer(spi, t); if (status < 0) break; } if (cs_change) { - mpc8xxx_spi_chipselect(spi, BITBANG_CS_ACTIVE); + fsl_spi_chipselect(spi, BITBANG_CS_ACTIVE); ndelay(nsecs); } cs_change = t->cs_change; if (t->len) - status = mpc8xxx_spi_bufs(spi, t, m->is_dma_mapped); + status = fsl_spi_bufs(spi, t, m->is_dma_mapped); if (status) { status = -EMSGSIZE; break; @@ -607,7 +506,7 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) if (cs_change) { ndelay(nsecs); - mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); + fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); ndelay(nsecs); } } @@ -617,35 +516,16 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) if (status || !cs_change) { ndelay(nsecs); - mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); + fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); } - mpc8xxx_spi_setup_transfer(spi, NULL); -} - -static void mpc8xxx_spi_work(struct work_struct *work) -{ - struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, - work); - - spin_lock_irq(&mpc8xxx_spi->lock); - while (!list_empty(&mpc8xxx_spi->queue)) { - struct spi_message *m = container_of(mpc8xxx_spi->queue.next, - struct spi_message, queue); - - list_del_init(&m->queue); - spin_unlock_irq(&mpc8xxx_spi->lock); - - mpc8xxx_spi_do_one_msg(m); - - spin_lock_irq(&mpc8xxx_spi->lock); - } - spin_unlock_irq(&mpc8xxx_spi->lock); + fsl_spi_setup_transfer(spi, NULL); } -static int mpc8xxx_spi_setup(struct spi_device *spi) +static int fsl_spi_setup(struct spi_device *spi) { struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_spi_reg *reg_base; int retval; u32 hw_mode; struct spi_mpc8xxx_cs *cs = spi->controller_state; @@ -661,8 +541,10 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) } mpc8xxx_spi = spi_master_get_devdata(spi->master); + reg_base = mpc8xxx_spi->reg_base; + hw_mode = cs->hw_mode; /* Save original settings */ - cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode); + cs->hw_mode = mpc8xxx_spi_read_reg(®_base->mode); /* mask out bits we are going to set */ cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH | SPMODE_REV | SPMODE_LOOP); @@ -676,7 +558,7 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) if (spi->mode & SPI_LOOP) cs->hw_mode |= SPMODE_LOOP; - retval = mpc8xxx_spi_setup_transfer(spi, NULL); + retval = fsl_spi_setup_transfer(spi, NULL); if (retval < 0) { cs->hw_mode = hw_mode; /* Restore settings */ return retval; @@ -684,9 +566,10 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) return 0; } -static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) +static void fsl_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) { u16 len; + struct fsl_spi_reg *reg_base = mspi->reg_base; dev_dbg(mspi->dev, "%s: bd datlen %d, count %d\n", __func__, in_be16(&mspi->rx_bd->cbd_datlen), mspi->count); @@ -698,20 +581,22 @@ static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) } /* Clear the events */ - mpc8xxx_spi_write_reg(&mspi->base->event, events); + mpc8xxx_spi_write_reg(®_base->event, events); mspi->count -= len; if (mspi->count) - mpc8xxx_spi_cpm_bufs_start(mspi); + fsl_spi_cpm_bufs_start(mspi); else complete(&mspi->done); } -static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) +static void fsl_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) { + struct fsl_spi_reg *reg_base = mspi->reg_base; + /* We need handle RX first */ if (events & SPIE_NE) { - u32 rx_data = mpc8xxx_spi_read_reg(&mspi->base->receive); + u32 rx_data = mpc8xxx_spi_read_reg(®_base->receive); if (mspi->rx) mspi->get_rx(rx_data, mspi); @@ -720,102 +605,80 @@ static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) if ((events & SPIE_NF) == 0) /* spin until TX is done */ while (((events = - mpc8xxx_spi_read_reg(&mspi->base->event)) & + mpc8xxx_spi_read_reg(®_base->event)) & SPIE_NF) == 0) cpu_relax(); /* Clear the events */ - mpc8xxx_spi_write_reg(&mspi->base->event, events); + mpc8xxx_spi_write_reg(®_base->event, events); mspi->count -= 1; if (mspi->count) { u32 word = mspi->get_tx(mspi); - mpc8xxx_spi_write_reg(&mspi->base->transmit, word); + mpc8xxx_spi_write_reg(®_base->transmit, word); } else { complete(&mspi->done); } } -static irqreturn_t mpc8xxx_spi_irq(s32 irq, void *context_data) +static irqreturn_t fsl_spi_irq(s32 irq, void *context_data) { struct mpc8xxx_spi *mspi = context_data; irqreturn_t ret = IRQ_NONE; u32 events; + struct fsl_spi_reg *reg_base = mspi->reg_base; /* Get interrupt events(tx/rx) */ - events = mpc8xxx_spi_read_reg(&mspi->base->event); + events = mpc8xxx_spi_read_reg(®_base->event); if (events) ret = IRQ_HANDLED; dev_dbg(mspi->dev, "%s: events %x\n", __func__, events); if (mspi->flags & SPI_CPM_MODE) - mpc8xxx_spi_cpm_irq(mspi, events); + fsl_spi_cpm_irq(mspi, events); else - mpc8xxx_spi_cpu_irq(mspi, events); + fsl_spi_cpu_irq(mspi, events); return ret; } -static int mpc8xxx_spi_transfer(struct spi_device *spi, - struct spi_message *m) +static void *fsl_spi_alloc_dummy_rx(void) { - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - unsigned long flags; + mutex_lock(&fsl_dummy_rx_lock); - m->actual_length = 0; - m->status = -EINPROGRESS; + if (!fsl_dummy_rx) + fsl_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); + if (fsl_dummy_rx) + fsl_dummy_rx_refcnt++; - spin_lock_irqsave(&mpc8xxx_spi->lock, flags); - list_add_tail(&m->queue, &mpc8xxx_spi->queue); - queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); - spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); + mutex_unlock(&fsl_dummy_rx_lock); - return 0; + return fsl_dummy_rx; } - -static void mpc8xxx_spi_cleanup(struct spi_device *spi) +static void fsl_spi_free_dummy_rx(void) { - kfree(spi->controller_state); -} + mutex_lock(&fsl_dummy_rx_lock); -static void *mpc8xxx_spi_alloc_dummy_rx(void) -{ - mutex_lock(&mpc8xxx_dummy_rx_lock); - - if (!mpc8xxx_dummy_rx) - mpc8xxx_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); - if (mpc8xxx_dummy_rx) - mpc8xxx_dummy_rx_refcnt++; - - mutex_unlock(&mpc8xxx_dummy_rx_lock); - - return mpc8xxx_dummy_rx; -} - -static void mpc8xxx_spi_free_dummy_rx(void) -{ - mutex_lock(&mpc8xxx_dummy_rx_lock); - - switch (mpc8xxx_dummy_rx_refcnt) { + switch (fsl_dummy_rx_refcnt) { case 0: WARN_ON(1); break; case 1: - kfree(mpc8xxx_dummy_rx); - mpc8xxx_dummy_rx = NULL; + kfree(fsl_dummy_rx); + fsl_dummy_rx = NULL; /* fall through */ default: - mpc8xxx_dummy_rx_refcnt--; + fsl_dummy_rx_refcnt--; break; } - mutex_unlock(&mpc8xxx_dummy_rx_lock); + mutex_unlock(&fsl_dummy_rx_lock); } -static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) +static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; struct device_node *np = dev->of_node; @@ -869,7 +732,7 @@ static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) return pram_ofs; } -static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) +static int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; struct device_node *np = dev->of_node; @@ -881,7 +744,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) if (!(mspi->flags & SPI_CPM_MODE)) return 0; - if (!mpc8xxx_spi_alloc_dummy_rx()) + if (!fsl_spi_alloc_dummy_rx()) return -ENOMEM; if (mspi->flags & SPI_QE) { @@ -902,7 +765,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) } } - pram_ofs = mpc8xxx_spi_cpm_get_pram(mspi); + pram_ofs = fsl_spi_cpm_get_pram(mspi); if (IS_ERR_VALUE(pram_ofs)) { dev_err(dev, "can't allocate spi parameter ram\n"); goto err_pram; @@ -922,7 +785,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) goto err_dummy_tx; } - mspi->dma_dummy_rx = dma_map_single(dev, mpc8xxx_dummy_rx, SPI_MRBLR, + mspi->dma_dummy_rx = dma_map_single(dev, fsl_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE); if (dma_mapping_error(dev, mspi->dma_dummy_rx)) { dev_err(dev, "unable to map dummy rx buffer\n"); @@ -960,11 +823,11 @@ err_dummy_tx: err_bds: cpm_muram_free(pram_ofs); err_pram: - mpc8xxx_spi_free_dummy_rx(); + fsl_spi_free_dummy_rx(); return -ENOMEM; } -static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi) +static void fsl_spi_cpm_free(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; @@ -972,30 +835,22 @@ static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi) dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); cpm_muram_free(cpm_muram_offset(mspi->tx_bd)); cpm_muram_free(cpm_muram_offset(mspi->pram)); - mpc8xxx_spi_free_dummy_rx(); + fsl_spi_free_dummy_rx(); } -static const char *mpc8xxx_spi_strmode(unsigned int flags) +static void fsl_spi_remove(struct mpc8xxx_spi *mspi) { - if (flags & SPI_QE_CPU_MODE) { - return "QE CPU"; - } else if (flags & SPI_CPM_MODE) { - if (flags & SPI_QE) - return "QE"; - else if (flags & SPI_CPM2) - return "CPM2"; - else - return "CPM1"; - } - return "CPU"; + iounmap(mspi->reg_base); + fsl_spi_cpm_free(mspi); } -static struct spi_master * __devinit -mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) +static struct spi_master * __devinit fsl_spi_probe(struct device *dev, + struct resource *mem, unsigned int irq) { struct fsl_spi_platform_data *pdata = dev->platform_data; struct spi_master *master; struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_spi_reg *reg_base; u32 regval; int ret = 0; @@ -1007,132 +862,77 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) dev_set_drvdata(dev, master); - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH - | SPI_LSB_FIRST | SPI_LOOP; + ret = mpc8xxx_spi_probe(dev, mem, irq); + if (ret) + goto err_probe; - master->setup = mpc8xxx_spi_setup; - master->transfer = mpc8xxx_spi_transfer; - master->cleanup = mpc8xxx_spi_cleanup; - master->dev.of_node = dev->of_node; + master->setup = fsl_spi_setup; mpc8xxx_spi = spi_master_get_devdata(master); - mpc8xxx_spi->dev = dev; - mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; - mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; - mpc8xxx_spi->flags = pdata->flags; - mpc8xxx_spi->spibrg = pdata->sysclk; + mpc8xxx_spi->spi_do_one_msg = fsl_spi_do_one_msg; + mpc8xxx_spi->spi_remove = fsl_spi_remove; + - ret = mpc8xxx_spi_cpm_init(mpc8xxx_spi); + ret = fsl_spi_cpm_init(mpc8xxx_spi); if (ret) goto err_cpm_init; - mpc8xxx_spi->rx_shift = 0; - mpc8xxx_spi->tx_shift = 0; if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { mpc8xxx_spi->rx_shift = 16; mpc8xxx_spi->tx_shift = 24; } - init_completion(&mpc8xxx_spi->done); - - mpc8xxx_spi->base = ioremap(mem->start, resource_size(mem)); - if (mpc8xxx_spi->base == NULL) { + mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); + if (mpc8xxx_spi->reg_base == NULL) { ret = -ENOMEM; goto err_ioremap; } - mpc8xxx_spi->irq = irq; - /* Register for SPI Interrupt */ - ret = request_irq(mpc8xxx_spi->irq, mpc8xxx_spi_irq, - 0, "mpc8xxx_spi", mpc8xxx_spi); + ret = request_irq(mpc8xxx_spi->irq, fsl_spi_irq, + 0, "fsl_spi", mpc8xxx_spi); if (ret != 0) - goto unmap_io; + goto free_irq; - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->max_chipselect; + reg_base = mpc8xxx_spi->reg_base; /* SPI controller initializations */ - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->command, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->event, 0xffffffff); + mpc8xxx_spi_write_reg(®_base->mode, 0); + mpc8xxx_spi_write_reg(®_base->mask, 0); + mpc8xxx_spi_write_reg(®_base->command, 0); + mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); /* Enable SPI interface */ regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) regval |= SPMODE_OP; - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, regval); - spin_lock_init(&mpc8xxx_spi->lock); - init_completion(&mpc8xxx_spi->done); - INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); - INIT_LIST_HEAD(&mpc8xxx_spi->queue); - - mpc8xxx_spi->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (mpc8xxx_spi->workqueue == NULL) { - ret = -EBUSY; - goto free_irq; - } + mpc8xxx_spi_write_reg(®_base->mode, regval); ret = spi_register_master(master); if (ret < 0) goto unreg_master; - dev_info(dev, "at 0x%p (irq = %d), %s mode\n", mpc8xxx_spi->base, + dev_info(dev, "at 0x%p (irq = %d), %s mode\n", reg_base, mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags)); return master; unreg_master: - destroy_workqueue(mpc8xxx_spi->workqueue); -free_irq: free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); -unmap_io: - iounmap(mpc8xxx_spi->base); +free_irq: + iounmap(mpc8xxx_spi->reg_base); err_ioremap: - mpc8xxx_spi_cpm_free(mpc8xxx_spi); + fsl_spi_cpm_free(mpc8xxx_spi); err_cpm_init: +err_probe: spi_master_put(master); err: return ERR_PTR(ret); } -static int __devexit mpc8xxx_spi_remove(struct device *dev) -{ - struct mpc8xxx_spi *mpc8xxx_spi; - struct spi_master *master; - - master = dev_get_drvdata(dev); - mpc8xxx_spi = spi_master_get_devdata(master); - - flush_workqueue(mpc8xxx_spi->workqueue); - destroy_workqueue(mpc8xxx_spi->workqueue); - spi_unregister_master(master); - - free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); - iounmap(mpc8xxx_spi->base); - mpc8xxx_spi_cpm_free(mpc8xxx_spi); - - return 0; -} - -struct mpc8xxx_spi_probe_info { - struct fsl_spi_platform_data pdata; - int *gpios; - bool *alow_flags; -}; - -static struct mpc8xxx_spi_probe_info * -to_of_pinfo(struct fsl_spi_platform_data *pdata) -{ - return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); -} - -static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on) +static void fsl_spi_cs_control(struct spi_device *spi, bool on) { struct device *dev = spi->dev.parent; struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data); @@ -1143,7 +943,7 @@ static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on) gpio_set_value(gpio, on ^ alow); } -static int of_mpc8xxx_spi_get_chipselects(struct device *dev) +static int of_fsl_spi_get_chipselects(struct device *dev) { struct device_node *np = dev->of_node; struct fsl_spi_platform_data *pdata = dev->platform_data; @@ -1204,7 +1004,7 @@ static int of_mpc8xxx_spi_get_chipselects(struct device *dev) } pdata->max_chipselect = ngpios; - pdata->cs_control = mpc8xxx_spi_cs_control; + pdata->cs_control = fsl_spi_cs_control; return 0; @@ -1223,7 +1023,7 @@ err_alloc_flags: return ret; } -static int of_mpc8xxx_spi_free_chipselects(struct device *dev) +static int of_fsl_spi_free_chipselects(struct device *dev) { struct fsl_spi_platform_data *pdata = dev->platform_data; struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); @@ -1242,50 +1042,21 @@ static int of_mpc8xxx_spi_free_chipselects(struct device *dev) return 0; } -static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, - const struct of_device_id *ofid) +static int __devinit of_fsl_spi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid) { struct device *dev = &ofdev->dev; struct device_node *np = ofdev->dev.of_node; - struct mpc8xxx_spi_probe_info *pinfo; - struct fsl_spi_platform_data *pdata; struct spi_master *master; struct resource mem; struct resource irq; - const void *prop; int ret = -ENOMEM; - pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); - if (!pinfo) - return -ENOMEM; - - pdata = &pinfo->pdata; - dev->platform_data = pdata; - - /* Allocate bus num dynamically. */ - pdata->bus_num = -1; - - /* SPI controller is either clocked from QE or SoC clock. */ - pdata->sysclk = get_brgfreq(); - if (pdata->sysclk == -1) { - pdata->sysclk = fsl_get_sys_freq(); - if (pdata->sysclk == -1) { - ret = -ENODEV; - goto err_clk; - } - } + ret = of_mpc8xxx_spi_probe(ofdev, ofid); + if (ret) + return ret; - prop = of_get_property(np, "mode", NULL); - if (prop && !strcmp(prop, "cpu-qe")) - pdata->flags = SPI_QE_CPU_MODE; - else if (prop && !strcmp(prop, "qe")) - pdata->flags = SPI_CPM_MODE | SPI_QE; - else if (of_device_is_compatible(np, "fsl,cpm2-spi")) - pdata->flags = SPI_CPM_MODE | SPI_CPM2; - else if (of_device_is_compatible(np, "fsl,cpm1-spi")) - pdata->flags = SPI_CPM_MODE | SPI_CPM1; - - ret = of_mpc8xxx_spi_get_chipselects(dev); + ret = of_fsl_spi_get_chipselects(dev); if (ret) goto err; @@ -1299,7 +1070,7 @@ static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, goto err; } - master = mpc8xxx_spi_probe(dev, &mem, irq.start); + master = fsl_spi_probe(dev, &mem, irq.start); if (IS_ERR(master)) { ret = PTR_ERR(master); goto err; @@ -1308,42 +1079,40 @@ static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, return 0; err: - of_mpc8xxx_spi_free_chipselects(dev); -err_clk: - kfree(pinfo); + of_fsl_spi_free_chipselects(dev); return ret; } -static int __devexit of_mpc8xxx_spi_remove(struct platform_device *ofdev) +static int __devexit of_fsl_spi_remove(struct platform_device *ofdev) { int ret; ret = mpc8xxx_spi_remove(&ofdev->dev); if (ret) return ret; - of_mpc8xxx_spi_free_chipselects(&ofdev->dev); + of_fsl_spi_free_chipselects(&ofdev->dev); return 0; } -static const struct of_device_id of_mpc8xxx_spi_match[] = { +static const struct of_device_id of_fsl_spi_match[] = { { .compatible = "fsl,spi" }, - {}, + {} }; -MODULE_DEVICE_TABLE(of, of_mpc8xxx_spi_match); +MODULE_DEVICE_TABLE(of, of_fsl_spi_match); -static struct of_platform_driver of_mpc8xxx_spi_driver = { +static struct of_platform_driver of_fsl_spi_driver = { .driver = { - .name = "mpc8xxx_spi", + .name = "fsl_spi", .owner = THIS_MODULE, - .of_match_table = of_mpc8xxx_spi_match, + .of_match_table = of_fsl_spi_match, }, - .probe = of_mpc8xxx_spi_probe, - .remove = __devexit_p(of_mpc8xxx_spi_remove), + .probe = of_fsl_spi_probe, + .remove = __devexit_p(of_fsl_spi_remove), }; #ifdef CONFIG_MPC832x_RDB /* - * XXX XXX XXX + * XXX XXX XXX * This is "legacy" platform driver, was used by the MPC8323E-RDB boards * only. The driver should go away soon, since newer MPC8323E-RDB's device * tree can work with OpenFirmware driver. But for now we support old trees @@ -1366,7 +1135,7 @@ static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) if (irq <= 0) return -EINVAL; - master = mpc8xxx_spi_probe(&pdev->dev, mem, irq); + master = fsl_spi_probe(&pdev->dev, mem, irq); if (IS_ERR(master)) return PTR_ERR(master); return 0; @@ -1405,21 +1174,20 @@ static void __init legacy_driver_register(void) {} static void __exit legacy_driver_unregister(void) {} #endif /* CONFIG_MPC832x_RDB */ -static int __init mpc8xxx_spi_init(void) +static int __init fsl_spi_init(void) { legacy_driver_register(); - return of_register_platform_driver(&of_mpc8xxx_spi_driver); + return of_register_platform_driver(&of_fsl_spi_driver); } +module_init(fsl_spi_init); -static void __exit mpc8xxx_spi_exit(void) +static void __exit fsl_spi_exit(void) { - of_unregister_platform_driver(&of_mpc8xxx_spi_driver); + of_unregister_platform_driver(&of_fsl_spi_driver); legacy_driver_unregister(); } - -module_init(mpc8xxx_spi_init); -module_exit(mpc8xxx_spi_exit); +module_exit(fsl_spi_exit); MODULE_AUTHOR("Kumar Gala"); -MODULE_DESCRIPTION("Simple MPC8xxx SPI Driver"); +MODULE_DESCRIPTION("Simple Freescale SPI Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 7972e9077473..55a38e2c6c13 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -56,7 +56,28 @@ struct spi_imx_config { unsigned int speed_hz; unsigned int bpw; unsigned int mode; - int cs; + u8 cs; +}; + +enum spi_imx_devtype { + SPI_IMX_VER_IMX1, + SPI_IMX_VER_0_0, + SPI_IMX_VER_0_4, + SPI_IMX_VER_0_5, + SPI_IMX_VER_0_7, + SPI_IMX_VER_2_3, + SPI_IMX_VER_AUTODETECT, +}; + +struct spi_imx_data; + +struct spi_imx_devtype_data { + void (*intctrl)(struct spi_imx_data *, int); + int (*config)(struct spi_imx_data *, struct spi_imx_config *); + void (*trigger)(struct spi_imx_data *); + int (*rx_available)(struct spi_imx_data *); + void (*reset)(struct spi_imx_data *); + unsigned int fifosize; }; struct spi_imx_data { @@ -76,11 +97,7 @@ struct spi_imx_data { const void *tx_buf; unsigned int txfifo; /* number of words pushed in tx FIFO */ - /* SoC specific functions */ - void (*intctrl)(struct spi_imx_data *, int); - int (*config)(struct spi_imx_data *, struct spi_imx_config *); - void (*trigger)(struct spi_imx_data *); - int (*rx_available)(struct spi_imx_data *); + struct spi_imx_devtype_data devtype_data; }; #define MXC_SPI_BUF_RX(type) \ @@ -140,7 +157,7 @@ static unsigned int spi_imx_clkdiv_1(unsigned int fin, return max; } -/* MX1, MX31, MX35 */ +/* MX1, MX31, MX35, MX51 CSPI */ static unsigned int spi_imx_clkdiv_2(unsigned int fin, unsigned int fspi) { @@ -155,6 +172,128 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, return 7; } +#define SPI_IMX2_3_CTRL 0x08 +#define SPI_IMX2_3_CTRL_ENABLE (1 << 0) +#define SPI_IMX2_3_CTRL_XCH (1 << 2) +#define SPI_IMX2_3_CTRL_MODE(cs) (1 << ((cs) + 4)) +#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8 +#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12 +#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18) +#define SPI_IMX2_3_CTRL_BL_OFFSET 20 + +#define SPI_IMX2_3_CONFIG 0x0c +#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) +#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) +#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) +#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) + +#define SPI_IMX2_3_INT 0x10 +#define SPI_IMX2_3_INT_TEEN (1 << 0) +#define SPI_IMX2_3_INT_RREN (1 << 3) + +#define SPI_IMX2_3_STAT 0x18 +#define SPI_IMX2_3_STAT_RR (1 << 3) + +/* MX51 eCSPI */ +static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi) +{ + /* + * there are two 4-bit dividers, the pre-divider divides by + * $pre, the post-divider by 2^$post + */ + unsigned int pre, post; + + if (unlikely(fspi > fin)) + return 0; + + post = fls(fin) - fls(fspi); + if (fin > fspi << post) + post++; + + /* now we have: (fin <= fspi << post) with post being minimal */ + + post = max(4U, post) - 4; + if (unlikely(post > 0xf)) { + pr_err("%s: cannot set clock freq: %u (base freq: %u)\n", + __func__, fspi, fin); + return 0xff; + } + + pre = DIV_ROUND_UP(fin, fspi << post) - 1; + + pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n", + __func__, fin, fspi, post, pre); + return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) | + (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET); +} + +static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable) +{ + unsigned val = 0; + + if (enable & MXC_INT_TE) + val |= SPI_IMX2_3_INT_TEEN; + + if (enable & MXC_INT_RR) + val |= SPI_IMX2_3_INT_RREN; + + writel(val, spi_imx->base + SPI_IMX2_3_INT); +} + +static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx) +{ + u32 reg; + + reg = readl(spi_imx->base + SPI_IMX2_3_CTRL); + reg |= SPI_IMX2_3_CTRL_XCH; + writel(reg, spi_imx->base + SPI_IMX2_3_CTRL); +} + +static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) +{ + u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0; + + /* set master mode */ + ctrl |= SPI_IMX2_3_CTRL_MODE(config->cs); + + /* set clock speed */ + ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz); + + /* set chip select to use */ + ctrl |= SPI_IMX2_3_CTRL_CS(config->cs); + + ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET; + + cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs); + + if (config->mode & SPI_CPHA) + cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs); + + if (config->mode & SPI_CPOL) + cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs); + + if (config->mode & SPI_CS_HIGH) + cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs); + + writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL); + writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG); + + return 0; +} + +static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx) +{ + return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR; +} + +static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx) +{ + /* drain receive buffer */ + while (spi_imx2_3_rx_available(spi_imx)) + readl(spi_imx->base + MXC_CSPIRXDATA); +} + #define MX31_INTREG_TEEN (1 << 0) #define MX31_INTREG_RREN (1 << 3) @@ -178,7 +317,7 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, * the i.MX35 has a slightly different register layout for bits * we do not use here. */ -static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx31_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -190,7 +329,7 @@ static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable) writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx31_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; @@ -199,20 +338,16 @@ static void mx31_trigger(struct spi_imx_data *spi_imx) writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx31_config(struct spi_imx_data *spi_imx, +static int __maybe_unused spi_imx0_4_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << MX31_CSPICTRL_DR_SHIFT; - if (cpu_is_mx31()) - reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT; - else if (cpu_is_mx25() || cpu_is_mx35()) { - reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; - reg |= MX31_CSPICTRL_SSCTL; - } + reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT; if (config->mode & SPI_CPHA) reg |= MX31_CSPICTRL_PHA; @@ -220,23 +355,52 @@ static int mx31_config(struct spi_imx_data *spi_imx, reg |= MX31_CSPICTRL_POL; if (config->mode & SPI_CS_HIGH) reg |= MX31_CSPICTRL_SSPOL; - if (config->cs < 0) { - if (cpu_is_mx31()) - reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT; - else if (cpu_is_mx25() || cpu_is_mx35()) - reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT; - } + if (cs < 0) + reg |= (cs + 32) << MX31_CSPICTRL_CS_SHIFT; + + writel(reg, spi_imx->base + MXC_CSPICTRL); + + return 0; +} + +static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) +{ + unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; + + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << + MX31_CSPICTRL_DR_SHIFT; + + reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; + reg |= MX31_CSPICTRL_SSCTL; + + if (config->mode & SPI_CPHA) + reg |= MX31_CSPICTRL_PHA; + if (config->mode & SPI_CPOL) + reg |= MX31_CSPICTRL_POL; + if (config->mode & SPI_CS_HIGH) + reg |= MX31_CSPICTRL_SSPOL; + if (cs < 0) + reg |= (cs + 32) << MX35_CSPICTRL_CS_SHIFT; writel(reg, spi_imx->base + MXC_CSPICTRL); return 0; } -static int mx31_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx31_rx_available(struct spi_imx_data *spi_imx) { return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR; } +static void __maybe_unused spi_imx0_4_reset(struct spi_imx_data *spi_imx) +{ + /* drain receive buffer */ + while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR) + readl(spi_imx->base + MXC_CSPIRXDATA); +} + #define MX27_INTREG_RR (1 << 4) #define MX27_INTREG_TEEN (1 << 9) #define MX27_INTREG_RREN (1 << 13) @@ -250,7 +414,7 @@ static int mx31_rx_available(struct spi_imx_data *spi_imx) #define MX27_CSPICTRL_DR_SHIFT 14 #define MX27_CSPICTRL_CS_SHIFT 19 -static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx27_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -262,7 +426,7 @@ static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable) writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx27_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx27_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; @@ -271,10 +435,11 @@ static void mx27_trigger(struct spi_imx_data *spi_imx) writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx27_config(struct spi_imx_data *spi_imx, +static int __maybe_unused mx27_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) << MX27_CSPICTRL_DR_SHIFT; @@ -286,19 +451,24 @@ static int mx27_config(struct spi_imx_data *spi_imx, reg |= MX27_CSPICTRL_POL; if (config->mode & SPI_CS_HIGH) reg |= MX27_CSPICTRL_SSPOL; - if (config->cs < 0) - reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT; + if (cs < 0) + reg |= (cs + 32) << MX27_CSPICTRL_CS_SHIFT; writel(reg, spi_imx->base + MXC_CSPICTRL); return 0; } -static int mx27_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx27_rx_available(struct spi_imx_data *spi_imx) { return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR; } +static void __maybe_unused spi_imx0_0_reset(struct spi_imx_data *spi_imx) +{ + writel(1, spi_imx->base + MXC_RESET); +} + #define MX1_INTREG_RR (1 << 3) #define MX1_INTREG_TEEN (1 << 8) #define MX1_INTREG_RREN (1 << 11) @@ -310,7 +480,7 @@ static int mx27_rx_available(struct spi_imx_data *spi_imx) #define MX1_CSPICTRL_MASTER (1 << 10) #define MX1_CSPICTRL_DR_SHIFT 13 -static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx1_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -322,7 +492,7 @@ static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable) writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx1_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx1_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; @@ -331,7 +501,7 @@ static void mx1_trigger(struct spi_imx_data *spi_imx) writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx1_config(struct spi_imx_data *spi_imx, +static int __maybe_unused mx1_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER; @@ -350,11 +520,73 @@ static int mx1_config(struct spi_imx_data *spi_imx, return 0; } -static int mx1_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx1_rx_available(struct spi_imx_data *spi_imx) { return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR; } +static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx) +{ + writel(1, spi_imx->base + MXC_RESET); +} + +/* + * These version numbers are taken from the Freescale driver. Unfortunately it + * doesn't support i.MX1, so this entry doesn't match the scheme. :-( + */ +static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = { +#ifdef CONFIG_SPI_IMX_VER_IMX1 + [SPI_IMX_VER_IMX1] = { + .intctrl = mx1_intctrl, + .config = mx1_config, + .trigger = mx1_trigger, + .rx_available = mx1_rx_available, + .reset = mx1_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_0 + [SPI_IMX_VER_0_0] = { + .intctrl = mx27_intctrl, + .config = mx27_config, + .trigger = mx27_trigger, + .rx_available = mx27_rx_available, + .reset = spi_imx0_0_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_4 + [SPI_IMX_VER_0_4] = { + .intctrl = mx31_intctrl, + .config = spi_imx0_4_config, + .trigger = mx31_trigger, + .rx_available = mx31_rx_available, + .reset = spi_imx0_4_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_7 + [SPI_IMX_VER_0_7] = { + .intctrl = mx31_intctrl, + .config = spi_imx0_7_config, + .trigger = mx31_trigger, + .rx_available = mx31_rx_available, + .reset = spi_imx0_4_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_2_3 + [SPI_IMX_VER_2_3] = { + .intctrl = spi_imx2_3_intctrl, + .config = spi_imx2_3_config, + .trigger = spi_imx2_3_trigger, + .rx_available = spi_imx2_3_rx_available, + .reset = spi_imx2_3_reset, + .fifosize = 64, + }, +#endif +}; + static void spi_imx_chipselect(struct spi_device *spi, int is_active) { struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); @@ -370,21 +602,21 @@ static void spi_imx_chipselect(struct spi_device *spi, int is_active) static void spi_imx_push(struct spi_imx_data *spi_imx) { - while (spi_imx->txfifo < 8) { + while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) { if (!spi_imx->count) break; spi_imx->tx(spi_imx); spi_imx->txfifo++; } - spi_imx->trigger(spi_imx); + spi_imx->devtype_data.trigger(spi_imx); } static irqreturn_t spi_imx_isr(int irq, void *dev_id) { struct spi_imx_data *spi_imx = dev_id; - while (spi_imx->rx_available(spi_imx)) { + while (spi_imx->devtype_data.rx_available(spi_imx)) { spi_imx->rx(spi_imx); spi_imx->txfifo--; } @@ -398,11 +630,12 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id) /* No data left to push, but still waiting for rx data, * enable receive data available interrupt. */ - spi_imx->intctrl(spi_imx, MXC_INT_RR); + spi_imx->devtype_data.intctrl( + spi_imx, MXC_INT_RR); return IRQ_HANDLED; } - spi_imx->intctrl(spi_imx, 0); + spi_imx->devtype_data.intctrl(spi_imx, 0); complete(&spi_imx->xfer_done); return IRQ_HANDLED; @@ -417,7 +650,7 @@ static int spi_imx_setupxfer(struct spi_device *spi, config.bpw = t ? t->bits_per_word : spi->bits_per_word; config.speed_hz = t ? t->speed_hz : spi->max_speed_hz; config.mode = spi->mode; - config.cs = spi_imx->chipselect[spi->chip_select]; + config.cs = spi->chip_select; if (!config.speed_hz) config.speed_hz = spi->max_speed_hz; @@ -439,7 +672,7 @@ static int spi_imx_setupxfer(struct spi_device *spi, } else BUG(); - spi_imx->config(spi_imx, &config); + spi_imx->devtype_data.config(spi_imx, &config); return 0; } @@ -458,7 +691,7 @@ static int spi_imx_transfer(struct spi_device *spi, spi_imx_push(spi_imx); - spi_imx->intctrl(spi_imx, MXC_INT_TE); + spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE); wait_for_completion(&spi_imx->xfer_done); @@ -485,6 +718,39 @@ static void spi_imx_cleanup(struct spi_device *spi) { } +static struct platform_device_id spi_imx_devtype[] = { + { + .name = DRIVER_NAME, + .driver_data = SPI_IMX_VER_AUTODETECT, + }, { + .name = "imx1-cspi", + .driver_data = SPI_IMX_VER_IMX1, + }, { + .name = "imx21-cspi", + .driver_data = SPI_IMX_VER_0_0, + }, { + .name = "imx25-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx27-cspi", + .driver_data = SPI_IMX_VER_0_0, + }, { + .name = "imx31-cspi", + .driver_data = SPI_IMX_VER_0_4, + }, { + .name = "imx35-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx51-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx51-ecspi", + .driver_data = SPI_IMX_VER_2_3, + }, { + /* sentinel */ + } +}; + static int __devinit spi_imx_probe(struct platform_device *pdev) { struct spi_imx_master *mxc_platform_info; @@ -536,6 +802,31 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) init_completion(&spi_imx->xfer_done); + if (pdev->id_entry->driver_data == SPI_IMX_VER_AUTODETECT) { + if (cpu_is_mx25() || cpu_is_mx35()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_0_7]; + else if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_0_4]; + else if (cpu_is_mx27() || cpu_is_mx21()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_0_0]; + else if (cpu_is_mx1()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_IMX1]; + else + BUG(); + } else + spi_imx->devtype_data = + spi_imx_devtype_data[pdev->id_entry->driver_data]; + + if (!spi_imx->devtype_data.intctrl) { + dev_err(&pdev->dev, "no support for this device compiled in\n"); + ret = -ENODEV; + goto out_gpio_free; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "can't get platform resource\n"); @@ -567,24 +858,6 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) goto out_iounmap; } - if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) { - spi_imx->intctrl = mx31_intctrl; - spi_imx->config = mx31_config; - spi_imx->trigger = mx31_trigger; - spi_imx->rx_available = mx31_rx_available; - } else if (cpu_is_mx27() || cpu_is_mx21()) { - spi_imx->intctrl = mx27_intctrl; - spi_imx->config = mx27_config; - spi_imx->trigger = mx27_trigger; - spi_imx->rx_available = mx27_rx_available; - } else if (cpu_is_mx1()) { - spi_imx->intctrl = mx1_intctrl; - spi_imx->config = mx1_config; - spi_imx->trigger = mx1_trigger; - spi_imx->rx_available = mx1_rx_available; - } else - BUG(); - spi_imx->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(spi_imx->clk)) { dev_err(&pdev->dev, "unable to get clock\n"); @@ -595,15 +868,9 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) clk_enable(spi_imx->clk); spi_imx->spi_clk = clk_get_rate(spi_imx->clk); - if (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) - writel(1, spi_imx->base + MXC_RESET); - - /* drain receive buffer */ - if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) - while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR) - readl(spi_imx->base + MXC_CSPIRXDATA); + spi_imx->devtype_data.reset(spi_imx); - spi_imx->intctrl(spi_imx, 0); + spi_imx->devtype_data.intctrl(spi_imx, 0); ret = spi_bitbang_start(&spi_imx->bitbang); if (ret) { @@ -668,6 +935,7 @@ static struct platform_driver spi_imx_driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, }, + .id_table = spi_imx_devtype, .probe = spi_imx_probe, .remove = __devexit_p(spi_imx_remove), }; diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index c3038da2648a..795828b90f45 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -261,15 +261,25 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, chcfg |= S3C64XX_SPI_CH_TXCH_ON; if (dma_mode) { modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; - s3c2410_dma_config(sdd->tx_dmach, 1); + s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8); s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, xfer->tx_dma, xfer->len); s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); } else { - unsigned char *buf = (unsigned char *) xfer->tx_buf; - int i = 0; - while (i < xfer->len) - writeb(buf[i++], regs + S3C64XX_SPI_TX_DATA); + switch (sdd->cur_bpw) { + case 32: + iowrite32_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len / 4); + break; + case 16: + iowrite16_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len / 2); + break; + default: + iowrite8_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len); + break; + } } } @@ -286,7 +296,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) | S3C64XX_SPI_PACKET_CNT_EN, regs + S3C64XX_SPI_PACKET_CNT); - s3c2410_dma_config(sdd->rx_dmach, 1); + s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8); s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, xfer->rx_dma, xfer->len); s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); @@ -366,20 +376,26 @@ static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, return -EIO; } } else { - unsigned char *buf; - int i; - /* If it was only Tx */ if (xfer->rx_buf == NULL) { sdd->state &= ~TXBUSY; return 0; } - i = 0; - buf = xfer->rx_buf; - while (i < xfer->len) - buf[i++] = readb(regs + S3C64XX_SPI_RX_DATA); - + switch (sdd->cur_bpw) { + case 32: + ioread32_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len / 4); + break; + case 16: + ioread16_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len / 2); + break; + default: + ioread8_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len); + break; + } sdd->state &= ~RXBUSY; } @@ -399,13 +415,18 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) { + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; u32 val; /* Disable Clock */ - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val &= ~S3C64XX_SPI_ENCLK_ENABLE; - writel(val, regs + S3C64XX_SPI_CLK_CFG); + if (sci->clk_from_cmu) { + clk_disable(sdd->src_clk); + } else { + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + } /* Set Polarity and Phase */ val = readl(regs + S3C64XX_SPI_CH_CFG); @@ -429,29 +450,39 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) switch (sdd->cur_bpw) { case 32: val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD; + val |= S3C64XX_SPI_MODE_CH_TSZ_WORD; break; case 16: val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD; + val |= S3C64XX_SPI_MODE_CH_TSZ_HALFWORD; break; default: val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE; + val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; break; } - val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; /* Always 8bits wide */ writel(val, regs + S3C64XX_SPI_MODE_CFG); - /* Configure Clock */ - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val &= ~S3C64XX_SPI_PSR_MASK; - val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) - & S3C64XX_SPI_PSR_MASK); - writel(val, regs + S3C64XX_SPI_CLK_CFG); - - /* Enable Clock */ - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val |= S3C64XX_SPI_ENCLK_ENABLE; - writel(val, regs + S3C64XX_SPI_CLK_CFG); + if (sci->clk_from_cmu) { + /* Configure Clock */ + /* There is half-multiplier before the SPI */ + clk_set_rate(sdd->src_clk, sdd->cur_speed * 2); + /* Enable Clock */ + clk_enable(sdd->src_clk); + } else { + /* Configure Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_PSR_MASK; + val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) + & S3C64XX_SPI_PSR_MASK); + writel(val, regs + S3C64XX_SPI_CLK_CFG); + + /* Enable Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val |= S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + } } static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, @@ -499,6 +530,7 @@ static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id, static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, struct spi_message *msg) { + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct device *dev = &sdd->pdev->dev; struct spi_transfer *xfer; @@ -514,6 +546,9 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, /* Map until end or first fail */ list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + continue; + if (xfer->tx_buf != NULL) { xfer->tx_dma = dma_map_single(dev, (void *)xfer->tx_buf, xfer->len, @@ -545,6 +580,7 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, struct spi_message *msg) { + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct device *dev = &sdd->pdev->dev; struct spi_transfer *xfer; @@ -553,6 +589,9 @@ static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + continue; + if (xfer->rx_buf != NULL && xfer->rx_dma != XFER_DMAADDR_INVALID) dma_unmap_single(dev, xfer->rx_dma, @@ -608,6 +647,14 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd, bpw = xfer->bits_per_word ? : spi->bits_per_word; speed = xfer->speed_hz ? : spi->max_speed_hz; + if (xfer->len % (bpw / 8)) { + dev_err(&spi->dev, + "Xfer length(%u) not a multiple of word size(%u)\n", + xfer->len, bpw / 8); + status = -EIO; + goto out; + } + if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { sdd->cur_bpw = bpw; sdd->cur_speed = speed; @@ -798,7 +845,6 @@ static int s3c64xx_spi_setup(struct spi_device *spi) struct s3c64xx_spi_driver_data *sdd; struct s3c64xx_spi_info *sci; struct spi_message *msg; - u32 psr, speed; unsigned long flags; int err = 0; @@ -841,32 +887,37 @@ static int s3c64xx_spi_setup(struct spi_device *spi) } /* Check if we can provide the requested rate */ - speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); /* Max possible */ - - if (spi->max_speed_hz > speed) - spi->max_speed_hz = speed; - - psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; - psr &= S3C64XX_SPI_PSR_MASK; - if (psr == S3C64XX_SPI_PSR_MASK) - psr--; + if (!sci->clk_from_cmu) { + u32 psr, speed; + + /* Max possible */ + speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); + + if (spi->max_speed_hz > speed) + spi->max_speed_hz = speed; + + psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; + psr &= S3C64XX_SPI_PSR_MASK; + if (psr == S3C64XX_SPI_PSR_MASK) + psr--; + + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz < speed) { + if (psr+1 < S3C64XX_SPI_PSR_MASK) { + psr++; + } else { + err = -EINVAL; + goto setup_exit; + } + } - speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); - if (spi->max_speed_hz < speed) { - if (psr+1 < S3C64XX_SPI_PSR_MASK) { - psr++; - } else { + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz >= speed) + spi->max_speed_hz = speed; + else err = -EINVAL; - goto setup_exit; - } } - speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); - if (spi->max_speed_hz >= speed) - spi->max_speed_hz = speed; - else - err = -EINVAL; - setup_exit: /* setup() returns with device de-selected */ @@ -888,7 +939,8 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) /* Disable Interrupts - we use Polling if not DMA mode */ writel(0, regs + S3C64XX_SPI_INT_EN); - writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, + if (!sci->clk_from_cmu) + writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, regs + S3C64XX_SPI_CLK_CFG); writel(0, regs + S3C64XX_SPI_MODE_CFG); writel(0, regs + S3C64XX_SPI_PACKET_CNT); diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c new file mode 100644 index 000000000000..58e187f45ec7 --- /dev/null +++ b/drivers/spi/spi_topcliff_pch.c @@ -0,0 +1,1303 @@ +/* + * SPI bus driver for the Topcliff PCH used by Intel SoCs + * + * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/wait.h> +#include <linux/spi/spi.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/spi/spidev.h> +#include <linux/module.h> +#include <linux/device.h> + +/* Register offsets */ +#define PCH_SPCR 0x00 /* SPI control register */ +#define PCH_SPBRR 0x04 /* SPI baud rate register */ +#define PCH_SPSR 0x08 /* SPI status register */ +#define PCH_SPDWR 0x0C /* SPI write data register */ +#define PCH_SPDRR 0x10 /* SPI read data register */ +#define PCH_SSNXCR 0x18 /* SSN Expand Control Register */ +#define PCH_SRST 0x1C /* SPI reset register */ + +#define PCH_SPSR_TFD 0x000007C0 +#define PCH_SPSR_RFD 0x0000F800 + +#define PCH_READABLE(x) (((x) & PCH_SPSR_RFD)>>11) +#define PCH_WRITABLE(x) (((x) & PCH_SPSR_TFD)>>6) + +#define PCH_RX_THOLD 7 +#define PCH_RX_THOLD_MAX 15 + +#define PCH_MAX_BAUDRATE 5000000 +#define PCH_MAX_FIFO_DEPTH 16 + +#define STATUS_RUNNING 1 +#define STATUS_EXITING 2 +#define PCH_SLEEP_TIME 10 + +#define PCH_ADDRESS_SIZE 0x20 + +#define SSN_LOW 0x02U +#define SSN_NO_CONTROL 0x00U +#define PCH_MAX_CS 0xFF +#define PCI_DEVICE_ID_GE_SPI 0x8816 + +#define SPCR_SPE_BIT (1 << 0) +#define SPCR_MSTR_BIT (1 << 1) +#define SPCR_LSBF_BIT (1 << 4) +#define SPCR_CPHA_BIT (1 << 5) +#define SPCR_CPOL_BIT (1 << 6) +#define SPCR_TFIE_BIT (1 << 8) +#define SPCR_RFIE_BIT (1 << 9) +#define SPCR_FIE_BIT (1 << 10) +#define SPCR_ORIE_BIT (1 << 11) +#define SPCR_MDFIE_BIT (1 << 12) +#define SPCR_FICLR_BIT (1 << 24) +#define SPSR_TFI_BIT (1 << 0) +#define SPSR_RFI_BIT (1 << 1) +#define SPSR_FI_BIT (1 << 2) +#define SPBRR_SIZE_BIT (1 << 10) + +#define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|SPCR_ORIE_BIT|SPCR_MDFIE_BIT) + +#define SPCR_RFIC_FIELD 20 +#define SPCR_TFIC_FIELD 16 + +#define SPSR_INT_BITS 0x1F +#define MASK_SPBRR_SPBR_BITS (~((1 << 10) - 1)) +#define MASK_RFIC_SPCR_BITS (~(0xf << 20)) +#define MASK_TFIC_SPCR_BITS (~(0xf000f << 12)) + +#define PCH_CLOCK_HZ 50000000 +#define PCH_MAX_SPBR 1023 + + +/** + * struct pch_spi_data - Holds the SPI channel specific details + * @io_remap_addr: The remapped PCI base address + * @master: Pointer to the SPI master structure + * @work: Reference to work queue handler + * @wk: Workqueue for carrying out execution of the + * requests + * @wait: Wait queue for waking up upon receiving an + * interrupt. + * @transfer_complete: Status of SPI Transfer + * @bcurrent_msg_processing: Status flag for message processing + * @lock: Lock for protecting this structure + * @queue: SPI Message queue + * @status: Status of the SPI driver + * @bpw_len: Length of data to be transferred in bits per + * word + * @transfer_active: Flag showing active transfer + * @tx_index: Transmit data count; for bookkeeping during + * transfer + * @rx_index: Receive data count; for bookkeeping during + * transfer + * @tx_buff: Buffer for data to be transmitted + * @rx_index: Buffer for Received data + * @n_curnt_chip: The chip number that this SPI driver currently + * operates on + * @current_chip: Reference to the current chip that this SPI + * driver currently operates on + * @current_msg: The current message that this SPI driver is + * handling + * @cur_trans: The current transfer that this SPI driver is + * handling + * @board_dat: Reference to the SPI device data structure + */ +struct pch_spi_data { + void __iomem *io_remap_addr; + struct spi_master *master; + struct work_struct work; + struct workqueue_struct *wk; + wait_queue_head_t wait; + u8 transfer_complete; + u8 bcurrent_msg_processing; + spinlock_t lock; + struct list_head queue; + u8 status; + u32 bpw_len; + u8 transfer_active; + u32 tx_index; + u32 rx_index; + u16 *pkt_tx_buff; + u16 *pkt_rx_buff; + u8 n_curnt_chip; + struct spi_device *current_chip; + struct spi_message *current_msg; + struct spi_transfer *cur_trans; + struct pch_spi_board_data *board_dat; +}; + +/** + * struct pch_spi_board_data - Holds the SPI device specific details + * @pdev: Pointer to the PCI device + * @irq_reg_sts: Status of IRQ registration + * @pci_req_sts: Status of pci_request_regions + * @suspend_sts: Status of suspend + * @data: Pointer to SPI channel data structure + */ +struct pch_spi_board_data { + struct pci_dev *pdev; + u8 irq_reg_sts; + u8 pci_req_sts; + u8 suspend_sts; + struct pch_spi_data *data; +}; + +static struct pci_device_id pch_spi_pcidev_id[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_GE_SPI)}, + {0,} +}; + +/** + * pch_spi_writereg() - Performs register writes + * @master: Pointer to struct spi_master. + * @idx: Register offset. + * @val: Value to be written to register. + */ +static inline void pch_spi_writereg(struct spi_master *master, int idx, u32 val) +{ + struct pch_spi_data *data = spi_master_get_devdata(master); + iowrite32(val, (data->io_remap_addr + idx)); +} + +/** + * pch_spi_readreg() - Performs register reads + * @master: Pointer to struct spi_master. + * @idx: Register offset. + */ +static inline u32 pch_spi_readreg(struct spi_master *master, int idx) +{ + struct pch_spi_data *data = spi_master_get_devdata(master); + return ioread32(data->io_remap_addr + idx); +} + +static inline void pch_spi_setclr_reg(struct spi_master *master, int idx, + u32 set, u32 clr) +{ + u32 tmp = pch_spi_readreg(master, idx); + tmp = (tmp & ~clr) | set; + pch_spi_writereg(master, idx, tmp); +} + +static void pch_spi_set_master_mode(struct spi_master *master) +{ + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MSTR_BIT, 0); +} + +/** + * pch_spi_clear_fifo() - Clears the Transmit and Receive FIFOs + * @master: Pointer to struct spi_master. + */ +static void pch_spi_clear_fifo(struct spi_master *master) +{ + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_FICLR_BIT, 0); + pch_spi_setclr_reg(master, PCH_SPCR, 0, SPCR_FICLR_BIT); +} + +static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, + void __iomem *io_remap_addr) +{ + u32 n_read, tx_index, rx_index, bpw_len; + u16 *pkt_rx_buffer, *pkt_tx_buff; + int read_cnt; + u32 reg_spcr_val; + void __iomem *spsr; + void __iomem *spdrr; + void __iomem *spdwr; + + spsr = io_remap_addr + PCH_SPSR; + iowrite32(reg_spsr_val, spsr); + + if (data->transfer_active) { + rx_index = data->rx_index; + tx_index = data->tx_index; + bpw_len = data->bpw_len; + pkt_rx_buffer = data->pkt_rx_buff; + pkt_tx_buff = data->pkt_tx_buff; + + spdrr = io_remap_addr + PCH_SPDRR; + spdwr = io_remap_addr + PCH_SPDWR; + + n_read = PCH_READABLE(reg_spsr_val); + + for (read_cnt = 0; (read_cnt < n_read); read_cnt++) { + pkt_rx_buffer[rx_index++] = ioread32(spdrr); + if (tx_index < bpw_len) + iowrite32(pkt_tx_buff[tx_index++], spdwr); + } + + /* disable RFI if not needed */ + if ((bpw_len - rx_index) <= PCH_MAX_FIFO_DEPTH) { + reg_spcr_val = ioread32(io_remap_addr + PCH_SPCR); + reg_spcr_val &= ~SPCR_RFIE_BIT; /* disable RFI */ + + /* reset rx threshold */ + reg_spcr_val &= MASK_RFIC_SPCR_BITS; + reg_spcr_val |= (PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD); + iowrite32(((reg_spcr_val) &= (~(SPCR_RFIE_BIT))), + (io_remap_addr + PCH_SPCR)); + } + + /* update counts */ + data->tx_index = tx_index; + data->rx_index = rx_index; + + } + + /* if transfer complete interrupt */ + if (reg_spsr_val & SPSR_FI_BIT) { + /* disable FI & RFI interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, + SPCR_FIE_BIT | SPCR_TFIE_BIT); + + /* transfer is completed;inform pch_spi_process_messages */ + data->transfer_complete = true; + wake_up(&data->wait); + } +} + +/** + * pch_spi_handler() - Interrupt handler + * @irq: The interrupt number. + * @dev_id: Pointer to struct pch_spi_board_data. + */ +static irqreturn_t pch_spi_handler(int irq, void *dev_id) +{ + u32 reg_spsr_val; + struct pch_spi_data *data; + void __iomem *spsr; + void __iomem *io_remap_addr; + irqreturn_t ret = IRQ_NONE; + struct pch_spi_board_data *board_dat = dev_id; + + if (board_dat->suspend_sts) { + dev_dbg(&board_dat->pdev->dev, + "%s returning due to suspend\n", __func__); + return IRQ_NONE; + } + + data = board_dat->data; + io_remap_addr = data->io_remap_addr; + spsr = io_remap_addr + PCH_SPSR; + + reg_spsr_val = ioread32(spsr); + + /* Check if the interrupt is for SPI device */ + if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) { + pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr); + ret = IRQ_HANDLED; + } + + dev_dbg(&board_dat->pdev->dev, "%s EXIT return value=%d\n", + __func__, ret); + + return ret; +} + +/** + * pch_spi_set_baud_rate() - Sets SPBR field in SPBRR + * @master: Pointer to struct spi_master. + * @speed_hz: Baud rate. + */ +static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz) +{ + u32 n_spbr = PCH_CLOCK_HZ / (speed_hz * 2); + + /* if baud rate is less than we can support limit it */ + if (n_spbr > PCH_MAX_SPBR) + n_spbr = PCH_MAX_SPBR; + + pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, ~MASK_SPBRR_SPBR_BITS); +} + +/** + * pch_spi_set_bits_per_word() - Sets SIZE field in SPBRR + * @master: Pointer to struct spi_master. + * @bits_per_word: Bits per word for SPI transfer. + */ +static void pch_spi_set_bits_per_word(struct spi_master *master, + u8 bits_per_word) +{ + if (bits_per_word == 8) + pch_spi_setclr_reg(master, PCH_SPBRR, 0, SPBRR_SIZE_BIT); + else + pch_spi_setclr_reg(master, PCH_SPBRR, SPBRR_SIZE_BIT, 0); +} + +/** + * pch_spi_setup_transfer() - Configures the PCH SPI hardware for transfer + * @spi: Pointer to struct spi_device. + */ +static void pch_spi_setup_transfer(struct spi_device *spi) +{ + u32 flags = 0; + + dev_dbg(&spi->dev, "%s SPBRR content =%x setting baud rate=%d\n", + __func__, pch_spi_readreg(spi->master, PCH_SPBRR), + spi->max_speed_hz); + pch_spi_set_baud_rate(spi->master, spi->max_speed_hz); + + /* set bits per word */ + pch_spi_set_bits_per_word(spi->master, spi->bits_per_word); + + if (!(spi->mode & SPI_LSB_FIRST)) + flags |= SPCR_LSBF_BIT; + if (spi->mode & SPI_CPOL) + flags |= SPCR_CPOL_BIT; + if (spi->mode & SPI_CPHA) + flags |= SPCR_CPHA_BIT; + pch_spi_setclr_reg(spi->master, PCH_SPCR, flags, + (SPCR_LSBF_BIT | SPCR_CPOL_BIT | SPCR_CPHA_BIT)); + + /* Clear the FIFO by toggling FICLR to 1 and back to 0 */ + pch_spi_clear_fifo(spi->master); +} + +/** + * pch_spi_reset() - Clears SPI registers + * @master: Pointer to struct spi_master. + */ +static void pch_spi_reset(struct spi_master *master) +{ + /* write 1 to reset SPI */ + pch_spi_writereg(master, PCH_SRST, 0x1); + + /* clear reset */ + pch_spi_writereg(master, PCH_SRST, 0x0); +} + +static int pch_spi_setup(struct spi_device *pspi) +{ + /* check bits per word */ + if (pspi->bits_per_word == 0) { + pspi->bits_per_word = 8; + dev_dbg(&pspi->dev, "%s 8 bits per word\n", __func__); + } + + if ((pspi->bits_per_word != 8) && (pspi->bits_per_word != 16)) { + dev_err(&pspi->dev, "%s Invalid bits per word\n", __func__); + return -EINVAL; + } + + /* Check baud rate setting */ + /* if baud rate of chip is greater than + max we can support,return error */ + if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE) + pspi->max_speed_hz = PCH_MAX_BAUDRATE; + + dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__, + (pspi->mode) & (SPI_CPOL | SPI_CPHA)); + + return 0; +} + +static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) +{ + + struct spi_transfer *transfer; + struct pch_spi_data *data = spi_master_get_devdata(pspi->master); + int retval; + unsigned long flags; + + /* validate spi message and baud rate */ + if (unlikely(list_empty(&pmsg->transfers) == 1)) { + dev_err(&pspi->dev, "%s list empty\n", __func__); + retval = -EINVAL; + goto err_out; + } + + if (unlikely(pspi->max_speed_hz == 0)) { + dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n", + __func__, pspi->max_speed_hz); + retval = -EINVAL; + goto err_out; + } + + dev_dbg(&pspi->dev, "%s Transfer List not empty. " + "Transfer Speed is set.\n", __func__); + + /* validate Tx/Rx buffers and Transfer length */ + list_for_each_entry(transfer, &pmsg->transfers, transfer_list) { + if (!transfer->tx_buf && !transfer->rx_buf) { + dev_err(&pspi->dev, + "%s Tx and Rx buffer NULL\n", __func__); + retval = -EINVAL; + goto err_out; + } + + if (!transfer->len) { + dev_err(&pspi->dev, "%s Transfer length invalid\n", + __func__); + retval = -EINVAL; + goto err_out; + } + + dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length" + " valid\n", __func__); + + /* if baud rate hs been specified validate the same */ + if (transfer->speed_hz > PCH_MAX_BAUDRATE) + transfer->speed_hz = PCH_MAX_BAUDRATE; + + /* if bits per word has been specified validate the same */ + if (transfer->bits_per_word) { + if ((transfer->bits_per_word != 8) + && (transfer->bits_per_word != 16)) { + retval = -EINVAL; + dev_err(&pspi->dev, + "%s Invalid bits per word\n", __func__); + goto err_out; + } + } + } + + spin_lock_irqsave(&data->lock, flags); + + /* We won't process any messages if we have been asked to terminate */ + if (data->status == STATUS_EXITING) { + dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__); + retval = -ESHUTDOWN; + goto err_return_spinlock; + } + + /* If suspended ,return -EINVAL */ + if (data->board_dat->suspend_sts) { + dev_err(&pspi->dev, "%s suspend; returning EINVAL\n", __func__); + retval = -EINVAL; + goto err_return_spinlock; + } + + /* set status of message */ + pmsg->actual_length = 0; + dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status); + + pmsg->status = -EINPROGRESS; + + /* add message to queue */ + list_add_tail(&pmsg->queue, &data->queue); + dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__); + + /* schedule work queue to run */ + queue_work(data->wk, &data->work); + dev_dbg(&pspi->dev, "%s - Invoked queue work\n", __func__); + + retval = 0; + +err_return_spinlock: + spin_unlock_irqrestore(&data->lock, flags); +err_out: + dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval); + return retval; +} + +static inline void pch_spi_select_chip(struct pch_spi_data *data, + struct spi_device *pspi) +{ + if (data->current_chip != NULL) { + if (pspi->chip_select != data->n_curnt_chip) { + dev_dbg(&pspi->dev, "%s : different slave\n", __func__); + data->current_chip = NULL; + } + } + + data->current_chip = pspi; + + data->n_curnt_chip = data->current_chip->chip_select; + + dev_dbg(&pspi->dev, "%s :Invoking pch_spi_setup_transfer\n", __func__); + pch_spi_setup_transfer(pspi); +} + +static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, + struct spi_message **ppmsg) +{ + int size; + u32 n_writes; + int j; + struct spi_message *pmsg; + const u8 *tx_buf; + const u16 *tx_sbuf; + + pmsg = *ppmsg; + + /* set baud rate if needed */ + if (data->cur_trans->speed_hz) { + dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__); + pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz); + } + + /* set bits per word if needed */ + if (data->cur_trans->bits_per_word && + (data->current_msg->spi->bits_per_word != data->cur_trans->bits_per_word)) { + dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__); + pch_spi_set_bits_per_word(data->master, + data->cur_trans->bits_per_word); + *bpw = data->cur_trans->bits_per_word; + } else { + *bpw = data->current_msg->spi->bits_per_word; + } + + /* reset Tx/Rx index */ + data->tx_index = 0; + data->rx_index = 0; + + data->bpw_len = data->cur_trans->len / (*bpw / 8); + + /* find alloc size */ + size = data->cur_trans->len * sizeof(*data->pkt_tx_buff); + + /* allocate memory for pkt_tx_buff & pkt_rx_buffer */ + data->pkt_tx_buff = kzalloc(size, GFP_KERNEL); + if (data->pkt_tx_buff != NULL) { + data->pkt_rx_buff = kzalloc(size, GFP_KERNEL); + if (!data->pkt_rx_buff) + kfree(data->pkt_tx_buff); + } + + if (!data->pkt_rx_buff) { + /* flush queue and set status of all transfers to -ENOMEM */ + dev_err(&data->master->dev, "%s :kzalloc failed\n", __func__); + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -ENOMEM; + + if (pmsg->complete != 0) + pmsg->complete(pmsg->context); + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + return; + } + + /* copy Tx Data */ + if (data->cur_trans->tx_buf != NULL) { + if (*bpw == 8) { + tx_buf = data->cur_trans->tx_buf; + for (j = 0; j < data->bpw_len; j++) + data->pkt_tx_buff[j] = *tx_buf++; + } else { + tx_sbuf = data->cur_trans->tx_buf; + for (j = 0; j < data->bpw_len; j++) + data->pkt_tx_buff[j] = *tx_sbuf++; + } + } + + /* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */ + n_writes = data->bpw_len; + if (n_writes > PCH_MAX_FIFO_DEPTH) + n_writes = PCH_MAX_FIFO_DEPTH; + + dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing " + "0x2 to SSNXCR\n", __func__); + pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW); + + for (j = 0; j < n_writes; j++) + pch_spi_writereg(data->master, PCH_SPDWR, data->pkt_tx_buff[j]); + + /* update tx_index */ + data->tx_index = j; + + /* reset transfer complete flag */ + data->transfer_complete = false; + data->transfer_active = true; +} + + +static void pch_spi_nomore_transfer(struct pch_spi_data *data, + struct spi_message *pmsg) +{ + dev_dbg(&data->master->dev, "%s called\n", __func__); + /* Invoke complete callback + * [To the spi core..indicating end of transfer] */ + data->current_msg->status = 0; + + if (data->current_msg->complete != 0) { + dev_dbg(&data->master->dev, + "%s:Invoking callback of SPI core\n", __func__); + data->current_msg->complete(data->current_msg->context); + } + + /* update status in global variable */ + data->bcurrent_msg_processing = false; + + dev_dbg(&data->master->dev, + "%s:data->bcurrent_msg_processing = false\n", __func__); + + data->current_msg = NULL; + data->cur_trans = NULL; + + /* check if we have items in list and not suspending + * return 1 if list empty */ + if ((list_empty(&data->queue) == 0) && + (!data->board_dat->suspend_sts) && + (data->status != STATUS_EXITING)) { + /* We have some more work to do (either there is more tranint + * bpw;sfer requests in the current message or there are + *more messages) + */ + dev_dbg(&data->master->dev, "%s:Invoke queue_work\n", __func__); + queue_work(data->wk, &data->work); + } else if (data->board_dat->suspend_sts || + data->status == STATUS_EXITING) { + dev_dbg(&data->master->dev, + "%s suspend/remove initiated, flushing queue\n", + __func__); + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -EIO; + + if (pmsg->complete) + pmsg->complete(pmsg->context); + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + } +} + +static void pch_spi_set_ir(struct pch_spi_data *data) +{ + /* enable interrupts */ + if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) { + /* set receive threhold to PCH_RX_THOLD */ + pch_spi_setclr_reg(data->master, PCH_SPCR, + PCH_RX_THOLD << SPCR_TFIC_FIELD, + ~MASK_TFIC_SPCR_BITS); + /* enable FI and RFI interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, + SPCR_RFIE_BIT | SPCR_TFIE_BIT, 0); + } else { + /* set receive threhold to maximum */ + pch_spi_setclr_reg(data->master, PCH_SPCR, + PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD, + ~MASK_TFIC_SPCR_BITS); + /* enable FI interrupt */ + pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_FIE_BIT, 0); + } + + dev_dbg(&data->master->dev, + "%s:invoking pch_spi_set_enable to enable SPI\n", __func__); + + /* SPI set enable */ + pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, SPCR_SPE_BIT, 0); + + /* Wait until the transfer completes; go to sleep after + initiating the transfer. */ + dev_dbg(&data->master->dev, + "%s:waiting for transfer to get over\n", __func__); + + wait_event_interruptible(data->wait, data->transfer_complete); + + pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL); + dev_dbg(&data->master->dev, + "%s:no more control over SSN-writing 0 to SSNXCR.", __func__); + + data->transfer_active = false; + dev_dbg(&data->master->dev, + "%s set data->transfer_active = false\n", __func__); + + /* clear all interrupts */ + pch_spi_writereg(data->master, PCH_SPSR, + pch_spi_readreg(data->master, PCH_SPSR)); + /* disable interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL); +} + +static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw) +{ + int j; + u8 *rx_buf; + u16 *rx_sbuf; + + /* copy Rx Data */ + if (!data->cur_trans->rx_buf) + return; + + if (bpw == 8) { + rx_buf = data->cur_trans->rx_buf; + for (j = 0; j < data->bpw_len; j++) + *rx_buf++ = data->pkt_rx_buff[j] & 0xFF; + } else { + rx_sbuf = data->cur_trans->rx_buf; + for (j = 0; j < data->bpw_len; j++) + *rx_sbuf++ = data->pkt_rx_buff[j]; + } +} + + +static void pch_spi_process_messages(struct work_struct *pwork) +{ + struct spi_message *pmsg; + struct pch_spi_data *data; + int bpw; + + data = container_of(pwork, struct pch_spi_data, work); + dev_dbg(&data->master->dev, "%s data initialized\n", __func__); + + spin_lock(&data->lock); + + /* check if suspend has been initiated;if yes flush queue */ + if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) { + dev_dbg(&data->master->dev, + "%s suspend/remove initiated,flushing queue\n", + __func__); + + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -EIO; + + if (pmsg->complete != 0) { + spin_unlock(&data->lock); + pmsg->complete(pmsg->context); + spin_lock(&data->lock); + } + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + + spin_unlock(&data->lock); + return; + } + + data->bcurrent_msg_processing = true; + dev_dbg(&data->master->dev, + "%s Set data->bcurrent_msg_processing= true\n", __func__); + + /* Get the message from the queue and delete it from there. */ + data->current_msg = list_entry(data->queue.next, struct spi_message, + queue); + + list_del_init(&data->current_msg->queue); + + data->current_msg->status = 0; + + pch_spi_select_chip(data, data->current_msg->spi); + + spin_unlock(&data->lock); + + do { + /* If we are already processing a message get the next + transfer structure from the message otherwise retrieve + the 1st transfer request from the message. */ + spin_lock(&data->lock); + + if (data->cur_trans == NULL) { + data->cur_trans = + list_entry(data->current_msg->transfers. + next, struct spi_transfer, + transfer_list); + dev_dbg(&data->master->dev, + "%s :Getting 1st transfer message\n", __func__); + } else { + data->cur_trans = + list_entry(data->cur_trans->transfer_list.next, + struct spi_transfer, + transfer_list); + dev_dbg(&data->master->dev, + "%s :Getting next transfer message\n", + __func__); + } + + spin_unlock(&data->lock); + + pch_spi_set_tx(data, &bpw, &pmsg); + + /* Control interrupt*/ + pch_spi_set_ir(data); + + /* Disable SPI transfer */ + pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, 0, + SPCR_SPE_BIT); + + /* clear FIFO */ + pch_spi_clear_fifo(data->master); + + /* copy Rx Data */ + pch_spi_copy_rx_data(data, bpw); + + /* free memory */ + kfree(data->pkt_rx_buff); + data->pkt_rx_buff = NULL; + + kfree(data->pkt_tx_buff); + data->pkt_tx_buff = NULL; + + /* increment message count */ + data->current_msg->actual_length += data->cur_trans->len; + + dev_dbg(&data->master->dev, + "%s:data->current_msg->actual_length=%d\n", + __func__, data->current_msg->actual_length); + + /* check for delay */ + if (data->cur_trans->delay_usecs) { + dev_dbg(&data->master->dev, "%s:" + "delay in usec=%d\n", __func__, + data->cur_trans->delay_usecs); + udelay(data->cur_trans->delay_usecs); + } + + spin_lock(&data->lock); + + /* No more transfer in this message. */ + if ((data->cur_trans->transfer_list.next) == + &(data->current_msg->transfers)) { + pch_spi_nomore_transfer(data, pmsg); + } + + spin_unlock(&data->lock); + + } while (data->cur_trans != NULL); +} + +static void pch_spi_free_resources(struct pch_spi_board_data *board_dat) +{ + dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); + + /* free workqueue */ + if (board_dat->data->wk != NULL) { + destroy_workqueue(board_dat->data->wk); + board_dat->data->wk = NULL; + dev_dbg(&board_dat->pdev->dev, + "%s destroy_workqueue invoked successfully\n", + __func__); + } + + /* disable interrupts & free IRQ */ + if (board_dat->irq_reg_sts) { + /* disable interrupts */ + pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, + PCH_ALL); + + /* free IRQ */ + free_irq(board_dat->pdev->irq, board_dat); + + dev_dbg(&board_dat->pdev->dev, + "%s free_irq invoked successfully\n", __func__); + + board_dat->irq_reg_sts = false; + } + + /* unmap PCI base address */ + if (board_dat->data->io_remap_addr != 0) { + pci_iounmap(board_dat->pdev, board_dat->data->io_remap_addr); + + board_dat->data->io_remap_addr = 0; + + dev_dbg(&board_dat->pdev->dev, + "%s pci_iounmap invoked successfully\n", __func__); + } + + /* release PCI region */ + if (board_dat->pci_req_sts) { + pci_release_regions(board_dat->pdev); + dev_dbg(&board_dat->pdev->dev, + "%s pci_release_regions invoked successfully\n", + __func__); + board_dat->pci_req_sts = false; + } +} + +static int pch_spi_get_resources(struct pch_spi_board_data *board_dat) +{ + void __iomem *io_remap_addr; + int retval; + dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); + + /* create workqueue */ + board_dat->data->wk = create_singlethread_workqueue(KBUILD_MODNAME); + if (!board_dat->data->wk) { + dev_err(&board_dat->pdev->dev, + "%s create_singlet hread_workqueue failed\n", __func__); + retval = -EBUSY; + goto err_return; + } + + dev_dbg(&board_dat->pdev->dev, + "%s create_singlethread_workqueue success\n", __func__); + + retval = pci_request_regions(board_dat->pdev, KBUILD_MODNAME); + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s request_region failed\n", __func__); + goto err_return; + } + + board_dat->pci_req_sts = true; + + io_remap_addr = pci_iomap(board_dat->pdev, 1, 0); + if (io_remap_addr == 0) { + dev_err(&board_dat->pdev->dev, + "%s pci_iomap failed\n", __func__); + retval = -ENOMEM; + goto err_return; + } + + /* calculate base address for all channels */ + board_dat->data->io_remap_addr = io_remap_addr; + + /* reset PCH SPI h/w */ + pch_spi_reset(board_dat->data->master); + dev_dbg(&board_dat->pdev->dev, + "%s pch_spi_reset invoked successfully\n", __func__); + + /* register IRQ */ + retval = request_irq(board_dat->pdev->irq, pch_spi_handler, + IRQF_SHARED, KBUILD_MODNAME, board_dat); + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s request_irq failed\n", __func__); + goto err_return; + } + + dev_dbg(&board_dat->pdev->dev, "%s request_irq returned=%d\n", + __func__, retval); + + board_dat->irq_reg_sts = true; + dev_dbg(&board_dat->pdev->dev, "%s data->irq_reg_sts=true\n", __func__); + +err_return: + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s FAIL:invoking pch_spi_free_resources\n", __func__); + pch_spi_free_resources(board_dat); + } + + dev_dbg(&board_dat->pdev->dev, "%s Return=%d\n", __func__, retval); + + return retval; +} + +static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + + struct spi_master *master; + + struct pch_spi_board_data *board_dat; + int retval; + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + /* allocate memory for private data */ + board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL); + if (board_dat == NULL) { + dev_err(&pdev->dev, + " %s memory allocation for private data failed\n", + __func__); + retval = -ENOMEM; + goto err_kmalloc; + } + + dev_dbg(&pdev->dev, + "%s memory allocation for private data success\n", __func__); + + /* enable PCI device */ + retval = pci_enable_device(pdev); + if (retval != 0) { + dev_err(&pdev->dev, "%s pci_enable_device FAILED\n", __func__); + + goto err_pci_en_device; + } + + dev_dbg(&pdev->dev, "%s pci_enable_device returned=%d\n", + __func__, retval); + + board_dat->pdev = pdev; + + /* alllocate memory for SPI master */ + master = spi_alloc_master(&pdev->dev, sizeof(struct pch_spi_data)); + if (master == NULL) { + retval = -ENOMEM; + dev_err(&pdev->dev, "%s Fail.\n", __func__); + goto err_spi_alloc_master; + } + + dev_dbg(&pdev->dev, + "%s spi_alloc_master returned non NULL\n", __func__); + + /* initialize members of SPI master */ + master->bus_num = -1; + master->num_chipselect = PCH_MAX_CS; + master->setup = pch_spi_setup; + master->transfer = pch_spi_transfer; + dev_dbg(&pdev->dev, + "%s transfer member of SPI master initialized\n", __func__); + + board_dat->data = spi_master_get_devdata(master); + + board_dat->data->master = master; + board_dat->data->n_curnt_chip = 255; + board_dat->data->board_dat = board_dat; + board_dat->data->status = STATUS_RUNNING; + + INIT_LIST_HEAD(&board_dat->data->queue); + spin_lock_init(&board_dat->data->lock); + INIT_WORK(&board_dat->data->work, pch_spi_process_messages); + init_waitqueue_head(&board_dat->data->wait); + + /* allocate resources for PCH SPI */ + retval = pch_spi_get_resources(board_dat); + if (retval) { + dev_err(&pdev->dev, "%s fail(retval=%d)\n", __func__, retval); + goto err_spi_get_resources; + } + + dev_dbg(&pdev->dev, "%s pch_spi_get_resources returned=%d\n", + __func__, retval); + + /* save private data in dev */ + pci_set_drvdata(pdev, board_dat); + dev_dbg(&pdev->dev, "%s invoked pci_set_drvdata\n", __func__); + + /* set master mode */ + pch_spi_set_master_mode(master); + dev_dbg(&pdev->dev, + "%s invoked pch_spi_set_master_mode\n", __func__); + + /* Register the controller with the SPI core. */ + retval = spi_register_master(master); + if (retval != 0) { + dev_err(&pdev->dev, + "%s spi_register_master FAILED\n", __func__); + goto err_spi_reg_master; + } + + dev_dbg(&pdev->dev, "%s spi_register_master returned=%d\n", + __func__, retval); + + + return 0; + +err_spi_reg_master: + spi_unregister_master(master); +err_spi_get_resources: +err_spi_alloc_master: + spi_master_put(master); + pci_disable_device(pdev); +err_pci_en_device: + kfree(board_dat); +err_kmalloc: + return retval; +} + +static void pch_spi_remove(struct pci_dev *pdev) +{ + struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); + int count; + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board_dat) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return; + } + + /* check for any pending messages; no action is taken if the queue + * is still full; but at least we tried. Unload anyway */ + count = 500; + spin_lock(&board_dat->data->lock); + board_dat->data->status = STATUS_EXITING; + while ((list_empty(&board_dat->data->queue) == 0) && --count) { + dev_dbg(&board_dat->pdev->dev, "%s :queue not empty\n", + __func__); + spin_unlock(&board_dat->data->lock); + msleep(PCH_SLEEP_TIME); + spin_lock(&board_dat->data->lock); + } + spin_unlock(&board_dat->data->lock); + + /* Free resources allocated for PCH SPI */ + pch_spi_free_resources(board_dat); + + spi_unregister_master(board_dat->data->master); + + /* free memory for private data */ + kfree(board_dat); + + pci_set_drvdata(pdev, NULL); + + /* disable PCI device */ + pci_disable_device(pdev); + + dev_dbg(&pdev->dev, "%s invoked pci_disable_device\n", __func__); +} + +#ifdef CONFIG_PM +static int pch_spi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + u8 count; + int retval; + + struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board_dat) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return -EFAULT; + } + + retval = 0; + board_dat->suspend_sts = true; + + /* check if the current message is processed: + Only after thats done the transfer will be suspended */ + count = 255; + while ((--count) > 0) { + if (!(board_dat->data->bcurrent_msg_processing)) { + dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_" + "msg_processing = false\n", __func__); + break; + } else { + dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_msg_" + "processing = true\n", __func__); + } + msleep(PCH_SLEEP_TIME); + } + + /* Free IRQ */ + if (board_dat->irq_reg_sts) { + /* disable all interrupts */ + pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, + PCH_ALL); + pch_spi_reset(board_dat->data->master); + + free_irq(board_dat->pdev->irq, board_dat); + + board_dat->irq_reg_sts = false; + dev_dbg(&pdev->dev, + "%s free_irq invoked successfully.\n", __func__); + } + + /* save config space */ + retval = pci_save_state(pdev); + + if (retval == 0) { + dev_dbg(&pdev->dev, "%s pci_save_state returned=%d\n", + __func__, retval); + /* disable PM notifications */ + pci_enable_wake(pdev, PCI_D3hot, 0); + dev_dbg(&pdev->dev, + "%s pci_enable_wake invoked successfully\n", __func__); + /* disable PCI device */ + pci_disable_device(pdev); + dev_dbg(&pdev->dev, + "%s pci_disable_device invoked successfully\n", + __func__); + /* move device to D3hot state */ + pci_set_power_state(pdev, PCI_D3hot); + dev_dbg(&pdev->dev, + "%s pci_set_power_state invoked successfully\n", + __func__); + } else { + dev_err(&pdev->dev, "%s pci_save_state failed\n", __func__); + } + + dev_dbg(&pdev->dev, "%s return=%d\n", __func__, retval); + + return retval; +} + +static int pch_spi_resume(struct pci_dev *pdev) +{ + int retval; + + struct pch_spi_board_data *board = pci_get_drvdata(pdev); + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return -EFAULT; + } + + /* move device to DO power state */ + pci_set_power_state(pdev, PCI_D0); + + /* restore state */ + pci_restore_state(pdev); + + retval = pci_enable_device(pdev); + if (retval < 0) { + dev_err(&pdev->dev, + "%s pci_enable_device failed\n", __func__); + } else { + /* disable PM notifications */ + pci_enable_wake(pdev, PCI_D3hot, 0); + + /* register IRQ handler */ + if (!board->irq_reg_sts) { + /* register IRQ */ + retval = request_irq(board->pdev->irq, pch_spi_handler, + IRQF_SHARED, KBUILD_MODNAME, + board); + if (retval < 0) { + dev_err(&pdev->dev, + "%s request_irq failed\n", __func__); + return retval; + } + board->irq_reg_sts = true; + + /* reset PCH SPI h/w */ + pch_spi_reset(board->data->master); + pch_spi_set_master_mode(board->data->master); + + /* set suspend status to false */ + board->suspend_sts = false; + + } + } + + dev_dbg(&pdev->dev, "%s returning=%d\n", __func__, retval); + + return retval; +} +#else +#define pch_spi_suspend NULL +#define pch_spi_resume NULL + +#endif + +static struct pci_driver pch_spi_pcidev = { + .name = "pch_spi", + .id_table = pch_spi_pcidev_id, + .probe = pch_spi_probe, + .remove = pch_spi_remove, + .suspend = pch_spi_suspend, + .resume = pch_spi_resume, +}; + +static int __init pch_spi_init(void) +{ + return pci_register_driver(&pch_spi_pcidev); +} +module_init(pch_spi_init); + +static void __exit pch_spi_exit(void) +{ + pci_unregister_driver(&pch_spi_pcidev); +} +module_exit(pch_spi_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Topcliff PCH SPI PCI Driver"); diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 7892ac163522..c68b3dc19e11 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -20,7 +20,6 @@ #include <linux/mmc/sdio_func.h> #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c index 526682d68de8..c7345dbf43fa 100644 --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -13,7 +13,6 @@ #include <linux/io.h> #include <linux/etherdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c index 9738cad4ba13..ee079ab9fb28 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -17,7 +17,6 @@ #include <linux/pci.h> #include <linux/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index f8ede1182ccc..0345b4caba73 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -37,7 +37,6 @@ Status: experimental #include <linux/delay.h> #include <linux/pci.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -692,10 +691,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* Initialize the pcmcia_device structure */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - cur_dev = link; das16cs_pcmcia_config(link); @@ -715,37 +710,12 @@ static void das16cs_pcmcia_detach(struct pcmcia_device *link) static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) + if (p_dev->config_index == 0) return -EINVAL; - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev); - } - - return 0; + return pcmcia_request_io(p_dev); } static void das16cs_pcmcia_config(struct pcmcia_device *link) @@ -754,6 +724,9 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) dev_dbg(&link->dev, "das16cs_pcmcia_config\n"); + /* Do we need to allocate an interrupt? */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, das16cs_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -763,25 +736,10 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(", io %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -832,9 +790,7 @@ struct pcmcia_driver das16cs_driver = { .resume = das16cs_pcmcia_resume, .id_table = das16cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "cb_das16_cs", - }, + .name = "cb_das16_cs", }; static int __init init_das16cs_pcmcia_cs(void) diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 48d9fb1227df..0b32a2df7768 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -48,7 +48,6 @@ Command support does not exist, but could be added for this board. #include "das08.h" /* pcmcia includes */ -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -115,40 +114,15 @@ static void das08_pcmcia_release(struct pcmcia_device *link); static int das08_pcmcia_suspend(struct pcmcia_device *p_dev); static int das08_pcmcia_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int das08_pcmcia_attach(struct pcmcia_device *); static void das08_pcmcia_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - das08_pcmcia_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int das08_pcmcia_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -162,16 +136,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - cur_dev = link; das08_pcmcia_config(link); @@ -179,15 +143,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) return 0; } /* das08_pcmcia_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void das08_pcmcia_detach(struct pcmcia_device *link) { @@ -203,46 +158,13 @@ static void das08_pcmcia_detach(struct pcmcia_device *link) static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev); - } - return 0; -} - - -/*====================================================================== - - das08_pcmcia_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. + if (p_dev->config_index == 0) + return -EINVAL; -======================================================================*/ + return pcmcia_request_io(p_dev); +} static void das08_pcmcia_config(struct pcmcia_device *link) { @@ -250,6 +172,8 @@ static void das08_pcmcia_config(struct pcmcia_device *link) dev_dbg(&link->dev, "das08_pcmcia_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, das08_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -259,25 +183,10 @@ static void das08_pcmcia_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -285,32 +194,12 @@ failed: } /* das08_pcmcia_config */ -/*====================================================================== - - After a card is removed, das08_pcmcia_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void das08_pcmcia_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "das08_pcmcia_release\n"); pcmcia_disable_device(link); } /* das08_pcmcia_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int das08_pcmcia_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -348,9 +237,7 @@ struct pcmcia_driver das08_cs_driver = { .resume = das08_pcmcia_resume, .id_table = das08_cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "pcm-das08", - }, + .name = "pcm-das08", }; static int __init init_das08_pcmcia_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index cc15666e5cc1..fc772a8a55c6 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -47,7 +47,6 @@ IRQ is assigned but not used. #include <linux/ioport.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -435,47 +434,20 @@ static int dio700_detach(struct comedi_device *dev) return 0; }; -/* PCMCIA crap -- watch your words, please! */ - static void dio700_config(struct pcmcia_device *link); static void dio700_release(struct pcmcia_device *link); static int dio700_cs_suspend(struct pcmcia_device *p_dev); static int dio700_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int dio700_cs_attach(struct pcmcia_device *); static void dio700_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - dio700_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int dio700_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -491,16 +463,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - pcmcia_cur_dev = link; dio700_config(link); @@ -508,15 +470,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) return 0; } /* dio700_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void dio700_cs_detach(struct pcmcia_device *link) { @@ -532,54 +485,13 @@ static void dio700_cs_detach(struct pcmcia_device *link) } /* dio700_cs_detach */ -/*====================================================================== - - dio700_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } static void dio700_config(struct pcmcia_device *link) @@ -591,6 +503,9 @@ static void dio700_config(struct pcmcia_device *link) dev_dbg(&link->dev, "dio700_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO | + CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -600,25 +515,10 @@ static void dio700_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -634,18 +534,6 @@ static void dio700_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* dio700_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int dio700_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -685,9 +573,7 @@ struct pcmcia_driver dio700_cs_driver = { .resume = dio700_cs_resume, .id_table = dio700_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_daq_700", - }, + .name = "ni_daq_700", }; static int __init init_dio700_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 773ae2044e0e..c9c28584db67 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -48,7 +48,6 @@ the PCMCIA interface. #include "8255.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -187,47 +186,20 @@ static int dio24_detach(struct comedi_device *dev) return 0; }; -/* PCMCIA crap -- watch your words! */ - static void dio24_config(struct pcmcia_device *link); static void dio24_release(struct pcmcia_device *link); static int dio24_cs_suspend(struct pcmcia_device *p_dev); static int dio24_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int dio24_cs_attach(struct pcmcia_device *); static void dio24_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - dio24_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int dio24_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -243,16 +215,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - pcmcia_cur_dev = link; dio24_config(link); @@ -260,15 +222,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) return 0; } /* dio24_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void dio24_cs_detach(struct pcmcia_device *link) { @@ -284,54 +237,13 @@ static void dio24_cs_detach(struct pcmcia_device *link) } /* dio24_cs_detach */ -/*====================================================================== - - dio24_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } static void dio24_config(struct pcmcia_device *link) @@ -342,6 +254,9 @@ static void dio24_config(struct pcmcia_device *link) dev_dbg(&link->dev, "dio24_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO | + CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -351,25 +266,10 @@ static void dio24_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -385,18 +285,6 @@ static void dio24_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* dio24_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int dio24_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -435,9 +323,7 @@ struct pcmcia_driver dio24_cs_driver = { .resume = dio24_cs_resume, .id_table = dio24_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_daq_dio24", - }, + .name = "ni_daq_dio24", }; static int __init init_dio24_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 68c4ecbd93ae..6facbc8bf776 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -71,7 +71,6 @@ NI manuals: #include "comedi_fc.h" #include "ni_labpc.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -153,59 +152,20 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) return labpc_common_attach(dev, iobase, irq, 0); } -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the dummy - event handler. - - Kernel version 2.6.16 upwards uses suspend() and resume() functions - instead of an event() function. -*/ - static void labpc_config(struct pcmcia_device *link); static void labpc_release(struct pcmcia_device *link); static int labpc_cs_suspend(struct pcmcia_device *p_dev); static int labpc_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int labpc_cs_attach(struct pcmcia_device *); static void labpc_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - labpc_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int labpc_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -219,16 +179,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - pcmcia_cur_dev = link; labpc_config(link); @@ -236,15 +186,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) return 0; } /* labpc_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void labpc_cs_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "labpc_cs_detach\n"); @@ -263,54 +204,13 @@ static void labpc_cs_detach(struct pcmcia_device *link) } /* labpc_cs_detach */ -/*====================================================================== - - labpc_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } @@ -320,6 +220,9 @@ static void labpc_config(struct pcmcia_device *link) dev_dbg(&link->dev, "labpc_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ | + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -329,25 +232,10 @@ static void labpc_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -362,18 +250,6 @@ static void labpc_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* labpc_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int labpc_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -391,8 +267,6 @@ static int labpc_cs_resume(struct pcmcia_device *link) return 0; } /* labpc_cs_resume */ -/*====================================================================*/ - static struct pcmcia_device_id labpc_cs_ids[] = { /* N.B. These IDs should match those in labpc_cs_boards (ni_labpc.c) */ PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0103), /* daqcard-1200 */ @@ -411,9 +285,7 @@ struct pcmcia_driver labpc_cs_driver = { .resume = labpc_cs_resume, .id_table = labpc_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "daqcard-1200", - }, + .name = "daqcard-1200", }; static int __init init_labpc_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index 1f2426352eb5..49563273f605 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -48,7 +48,6 @@ See the notes in the ni_atmio.o driver. #include "ni_stc.h" #include "8255.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -263,11 +262,6 @@ static struct pcmcia_device *cur_dev = NULL; static int cs_attach(struct pcmcia_device *link) { - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->resource[0]->end = 16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - cur_dev = link; mio_cs_config(link); @@ -301,16 +295,12 @@ static int mio_cs_resume(struct pcmcia_device *link) } -static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { int base, ret; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; for (base = 0x000; base < 0x400; base += 0x20) { p_dev->resource[0]->start = base; @@ -327,6 +317,7 @@ static void mio_cs_config(struct pcmcia_device *link) int ret; DPRINTK("mio_cs_config(link=%p)\n", link); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, mio_pcmcia_config_loop, NULL); if (ret) { @@ -337,7 +328,7 @@ static void mio_cs_config(struct pcmcia_device *link) if (!link->irq) dev_info(&link->dev, "no IRQ available\n"); - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); } static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it) @@ -446,9 +437,7 @@ struct pcmcia_driver ni_mio_cs_driver = { .resume = &mio_cs_resume, .id_table = ni_mio_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_mio_cs", - }, + .name = "ni_mio_cs", }; int init_module(void) diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index bf489d7f4990..ebba9bb47777 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -50,7 +50,6 @@ Devices: [Quatech] DAQP-208 (daqp), DAQP-308 #include "../comedidev.h" #include <linux/semaphore.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -969,43 +968,14 @@ static int daqp_detach(struct comedi_device *dev) ======================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. - - Kernel version 2.6.16 upwards uses suspend() and resume() functions - instead of an event() function. -*/ - static void daqp_cs_config(struct pcmcia_device *link); static void daqp_cs_release(struct pcmcia_device *link); static int daqp_cs_suspend(struct pcmcia_device *p_dev); static int daqp_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int daqp_cs_attach(struct pcmcia_device *); static void daqp_cs_detach(struct pcmcia_device *); -/*====================================================================== - - daqp_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int daqp_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -1031,30 +1001,11 @@ static int daqp_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - daqp_cs_config(link); return 0; } /* daqp_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void daqp_cs_detach(struct pcmcia_device *link) { struct local_info_t *dev = link->priv; @@ -1070,45 +1021,11 @@ static void daqp_cs_detach(struct pcmcia_device *link) } /* daqp_cs_detach */ -/*====================================================================== - - daqp_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - - -static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; + if (p_dev->config_index == 0) + return -EINVAL; - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -1118,6 +1035,8 @@ static void daqp_cs_config(struct pcmcia_device *link) dev_dbg(&link->dev, "daqp_cs_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, daqp_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -1128,25 +1047,10 @@ static void daqp_cs_config(struct pcmcia_device *link) if (ret) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -1161,18 +1065,6 @@ static void daqp_cs_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* daqp_cs_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int daqp_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -1212,9 +1104,7 @@ static struct pcmcia_driver daqp_cs_driver = { .resume = daqp_cs_resume, .id_table = daqp_cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "quatech_daqp_cs", - }, + .name = "quatech_daqp_cs", }; int __init init_module(void) diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 19c335458653..6555891e149c 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -83,7 +83,6 @@ #include <linux/if_arp.h> #include <linux/ioport.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -147,10 +146,9 @@ static int wl_adapter_attach(struct pcmcia_device *link) link->resource[0]->end = HCF_NUM_IO_PORTS; link->resource[0]->flags= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 5; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 5; + link->config_regs = PRESENT_OPTION; link->priv = dev; lp = wl_priv(dev); @@ -165,27 +163,6 @@ static int wl_adapter_attach(struct pcmcia_device *link) -/******************************************************************************* - * wl_adapter_detach() - ******************************************************************************* - * - * DESCRIPTION: - * - * This deletes a driver "instance". The device is de-registered with Card - * Services. If it has been released, then the net device is unregistered, and - * all local data structures are freed. Otherwise, the structures will be - * freed when the device is released. - * - * PARAMETERS: - * - * link - pointer to the dev_link_t structure representing the device to - * detach - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ static void wl_adapter_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -209,26 +186,6 @@ static void wl_adapter_detach(struct pcmcia_device *link) /*============================================================================*/ -/******************************************************************************* - * wl_adapter_release() - ******************************************************************************* - * - * DESCRIPTION: - * - * After a card is removed, this routine will release the PCMCIA - * configuration. If the device is still open, this will be postponed until it - * is closed. - * - * PARAMETERS: - * - * arg - a u_long representing a pointer to a dev_link_t structure for the - * device to be released. - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ void wl_adapter_release(struct pcmcia_device *link) { DBG_FUNC("wl_adapter_release"); @@ -268,26 +225,6 @@ static int wl_adapter_resume(struct pcmcia_device *link) return 0; } /* wl_adapter_resume */ -/******************************************************************************* - * wl_adapter_insert() - ******************************************************************************* - * - * DESCRIPTION: - * - * wl_adapter_insert() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - * - * PARAMETERS: - * - * link - pointer to the dev_link_t structure representing the device to - * insert - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ void wl_adapter_insert(struct pcmcia_device *link) { struct net_device *dev; @@ -302,7 +239,7 @@ void wl_adapter_insert(struct pcmcia_device *link) dev = link->priv; /* Do we need to allocate an interrupt? */ - link->conf.Attributes |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->io_lines = 6; ret = pcmcia_request_io(link); @@ -313,7 +250,7 @@ void wl_adapter_insert(struct pcmcia_device *link) if (ret != 0) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) goto failed; @@ -457,9 +394,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl_adapter_ids); static struct pcmcia_driver wlags49_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = wl_adapter_attach, .remove = wl_adapter_detach, .id_table = wl_adapter_ids, diff --git a/drivers/staging/wlags49_h2/wl_internal.h b/drivers/staging/wlags49_h2/wl_internal.h index 02f0a20e178a..cd129b3ee6c0 100644 --- a/drivers/staging/wlags49_h2/wl_internal.h +++ b/drivers/staging/wlags49_h2/wl_internal.h @@ -69,7 +69,6 @@ ******************************************************************************/ #include <linux/version.h> #ifdef BUS_PCMCIA -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> diff --git a/drivers/staging/wlags49_h2/wl_main.c b/drivers/staging/wlags49_h2/wl_main.c index 88d0d472142f..8e3536acbf46 100644 --- a/drivers/staging/wlags49_h2/wl_main.c +++ b/drivers/staging/wlags49_h2/wl_main.c @@ -414,25 +414,6 @@ extern memimage fw_image; // firmware image to be downloaded #endif /* HCF_STA */ -/******************************************************************************* - * wl_insert() - ******************************************************************************* - * - * DESCRIPTION: - * - * wl_insert() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - * - * PARAMETERS: - * - * dev - a pointer to the net_device struct of the wireless device - * - * RETURNS: - * - * TRUE or FALSE - * - ******************************************************************************/ int wl_insert( struct net_device *dev ) { int result = 0; diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index a1900e502518..d005b9eeebbc 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -8,7 +8,6 @@ #include <linux/errno.h> /* error codes */ #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -32,9 +31,6 @@ static int ixj_probe(struct pcmcia_device *p_dev) { dev_dbg(&p_dev->dev, "ixj_attach()\n"); /* Create new ixj device */ - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->conf.IntType = INT_MEMORY_AND_IO; p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL); if (!p_dev->priv) { return -ENOMEM; @@ -111,40 +107,31 @@ failed: return; } -static int ixj_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int ixj_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - p_dev->io_lines = 3; - if (io->nwin == 2) { - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 3; + + return pcmcia_request_io(p_dev); } static int ixj_config(struct pcmcia_device * link) { IXJ *j; ixj_info_t *info; - cistpl_cftable_entry_t dflt = { 0 }; info = link->priv; dev_dbg(&link->dev, "ixj_config\n"); - if (pcmcia_loop_config(link, ixj_config_check, &dflt)) + link->config_flags = CONF_AUTO_SET_IO; + + if (pcmcia_loop_config(link, ixj_config_check, NULL)) goto failed; - if (pcmcia_request_configuration(link, &link->conf)) + if (pcmcia_enable_device(link)) goto failed; /* @@ -178,9 +165,7 @@ MODULE_DEVICE_TABLE(pcmcia, ixj_ids); static struct pcmcia_driver ixj_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ixj_cs", - }, + .name = "ixj_cs", .probe = ixj_probe, .remove = ixj_detach, .id_table = ixj_ids, diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 418163894775..afef7b0a4195 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -24,6 +24,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <mach/ohci.h> +#include <mach/pxa3xx-u2d.h> /* * UHC: USB Host Controller (OHCI-like) register definitions @@ -235,6 +236,9 @@ static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev) if (retval < 0) return retval; + if (cpu_is_pxa3xx()) + pxa3xx_u2d_start_hc(&ohci_to_hcd(&ohci->ohci)->self); + uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE; __raw_writel(uhchr, ohci->mmio_base + UHCHR); __raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE); @@ -251,6 +255,9 @@ static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev) inf = dev->platform_data; + if (cpu_is_pxa3xx()) + pxa3xx_u2d_stop_hc(&ohci_to_hcd(&ohci->ohci)->self); + if (inf->exit) inf->exit(dev); diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 0e13a00eb2ed..3775c035a6c5 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -20,7 +20,6 @@ #include <linux/ioport.h> #include <linux/platform_device.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -132,49 +131,12 @@ static void sl811_cs_release(struct pcmcia_device * link) platform_device_unregister(&platform_dev); } -static int sl811_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int sl811_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc) - return -ENODEV; - } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (dflt->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc) - return -ENODEV; - } - - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - /* we need an interrupt */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - - return pcmcia_request_io(p_dev); - } - pcmcia_disable_device(p_dev); - return -ENODEV; + if (p_dev->config_index == 0) + return -EINVAL; + + return pcmcia_request_io(p_dev); } @@ -185,6 +147,9 @@ static int sl811_cs_config(struct pcmcia_device *link) dev_dbg(&link->dev, "sl811_cs_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO; + if (pcmcia_loop_config(link, sl811_cs_config_check, NULL)) goto failed; @@ -195,18 +160,10 @@ static int sl811_cs_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - printk(", irq %d", link->irq); - printk(", io %pR", link->resource[0]); - printk("\n"); - if (sl811_hc_init(parent, link->resource[0]->start, link->irq) < 0) { failed: @@ -227,9 +184,6 @@ static int sl811_cs_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return sl811_cs_config(link); } @@ -241,9 +195,7 @@ MODULE_DEVICE_TABLE(pcmcia, sl811_ids); static struct pcmcia_driver sl811_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "sl811_cs", - }, + .name = "sl811_cs", .probe = sl811_cs_probe, .remove = sl811_cs_detach, .id_table = sl811_ids, diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c index f6fdc2085f3e..fed2a72bc6b6 100644 --- a/drivers/video/omap2/vram.c +++ b/drivers/video/omap2/vram.c @@ -554,12 +554,8 @@ void __init omap_vram_reserve_sdram_memblock(void) size = PAGE_ALIGN(size); if (paddr) { - struct memblock_property res; - - res.base = paddr; - res.size = size; - if ((paddr & ~PAGE_MASK) || memblock_find(&res) || - res.base != paddr || res.size != size) { + if ((paddr & ~PAGE_MASK) || + !memblock_is_region_memory(paddr, size)) { pr_err("Illegal SDRAM region for VRAM\n"); return; } diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c index a31a77ff6f3d..cea6403ae71c 100644 --- a/drivers/video/pxa168fb.c +++ b/drivers/video/pxa168fb.c @@ -784,12 +784,53 @@ failed: return ret; } +static int __devexit pxa168fb_remove(struct platform_device *pdev) +{ + struct pxa168fb_info *fbi = platform_get_drvdata(pdev); + struct fb_info *info; + int irq; + unsigned int data; + + if (!fbi) + return 0; + + /* disable DMA transfer */ + data = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0); + data &= ~CFG_GRA_ENA_MASK; + writel(data, fbi->reg_base + LCD_SPU_DMA_CTRL0); + + info = fbi->info; + + unregister_framebuffer(info); + + writel(GRA_FRAME_IRQ0_ENA(0x0), fbi->reg_base + SPU_IRQ_ENA); + + if (info->cmap.len) + fb_dealloc_cmap(&info->cmap); + + irq = platform_get_irq(pdev, 0); + free_irq(irq, fbi); + + dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len), + info->screen_base, info->fix.smem_start); + + iounmap(fbi->reg_base); + + clk_disable(fbi->clk); + clk_put(fbi->clk); + + framebuffer_release(info); + + return 0; +} + static struct platform_driver pxa168fb_driver = { .driver = { .name = "pxa168-fb", .owner = THIS_MODULE, }, .probe = pxa168fb_probe, + .remove = __devexit_p(pxa168fb_remove), }; static int __init pxa168fb_init(void) @@ -798,6 +839,12 @@ static int __init pxa168fb_init(void) } module_init(pxa168fb_init); +static void __exit pxa168fb_exit(void) +{ + platform_driver_unregister(&pxa168fb_driver); +} +module_exit(pxa168fb_exit); + MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> " "Green Wan <gwan@marvell.com>"); MODULE_DESCRIPTION("Framebuffer driver for PXA168/910"); diff --git a/drivers/vlynq/vlynq.c b/drivers/vlynq/vlynq.c index f2d9e667972d..f885c868a04d 100644 --- a/drivers/vlynq/vlynq.c +++ b/drivers/vlynq/vlynq.c @@ -31,6 +31,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/irq.h> #include <linux/vlynq.h> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 24efd8ea41bb..c356146bd712 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -957,12 +957,32 @@ config PIKA_WDT the Warp platform. config BOOKE_WDT - bool "PowerPC Book-E Watchdog Timer" + tristate "PowerPC Book-E Watchdog Timer" depends on BOOKE || 4xx ---help--- + Watchdog driver for PowerPC Book-E chips, such as the Freescale + MPC85xx SOCs and the IBM PowerPC 440. + Please see Documentation/watchdog/watchdog-api.txt for more information. +config BOOKE_WDT_DEFAULT_TIMEOUT + int "PowerPC Book-E Watchdog Timer Default Timeout" + depends on BOOKE_WDT + default 38 if FSL_BOOKE + range 0 63 if FSL_BOOKE + default 3 if !FSL_BOOKE + range 0 3 if !FSL_BOOKE + help + Select the default watchdog timer period to be used by the PowerPC + Book-E watchdog driver. A watchdog "event" occurs when the bit + position represented by this number transitions from zero to one. + + For Freescale Book-E processors, this is a number between 0 and 63. + For other Book-E processors, this is a number between 0 and 3. + + The value can be overidden by the wdt_period command-line parameter. + # PPC64 Architecture config WATCHDOG_RTAS diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 3d49671cdf5a..d11ffb091b0d 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -4,7 +4,7 @@ * Author: Matthew McClintock * Maintainer: Kumar Gala <galak@kernel.crashing.org> * - * Copyright 2005, 2008 Freescale Semiconductor Inc. + * Copyright 2005, 2008, 2010 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -33,14 +33,8 @@ * occur, and the final time the board will reset. */ -#ifdef CONFIG_FSL_BOOKE -#define WDT_PERIOD_DEFAULT 38 /* Ex. wdt_period=28 bus=333Mhz,reset=~40sec */ -#else -#define WDT_PERIOD_DEFAULT 3 /* Refer to the PPC40x and PPC4xx manuals */ -#endif /* for timing information */ - u32 booke_wdt_enabled; -u32 booke_wdt_period = WDT_PERIOD_DEFAULT; +u32 booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT; #ifdef CONFIG_FSL_BOOKE #define WDTP(x) ((((x)&0x3)<<30)|(((x)&0x3c)<<15)) @@ -114,6 +108,27 @@ static void __booke_wdt_enable(void *data) mtspr(SPRN_TCR, val); } +/** + * booke_wdt_disable - disable the watchdog on the given CPU + * + * This function is called on each CPU. It disables the watchdog on that CPU. + * + * TCR[WRC] cannot be changed once it has been set to non-zero, but we can + * effectively disable the watchdog by setting its period to the maximum value. + */ +static void __booke_wdt_disable(void *data) +{ + u32 val; + + val = mfspr(SPRN_TCR); + val &= ~(TCR_WIE | WDTP_MASK); + mtspr(SPRN_TCR, val); + + /* clear status to make sure nothing is pending */ + __booke_wdt_ping(NULL); + +} + static ssize_t booke_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { @@ -193,12 +208,21 @@ static int booke_wdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } +static int booke_wdt_release(struct inode *inode, struct file *file) +{ + on_each_cpu(__booke_wdt_disable, NULL, 0); + booke_wdt_enabled = 0; + + return 0; +} + static const struct file_operations booke_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = booke_wdt_write, .unlocked_ioctl = booke_wdt_ioctl, .open = booke_wdt_open, + .release = booke_wdt_release, }; static struct miscdevice booke_wdt_miscdev = { @@ -237,4 +261,9 @@ static int __init booke_wdt_init(void) return ret; } -device_initcall(booke_wdt_init); + +module_init(booke_wdt_init); +module_exit(booke_wdt_exit); + +MODULE_DESCRIPTION("PowerPC Book-E watchdog driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/octeon-wdt-main.c b/drivers/watchdog/octeon-wdt-main.c index 2a410170eca6..909923800a02 100644 --- a/drivers/watchdog/octeon-wdt-main.c +++ b/drivers/watchdog/octeon-wdt-main.c @@ -64,6 +64,7 @@ #include <linux/cpu.h> #include <linux/smp.h> #include <linux/fs.h> +#include <linux/irq.h> #include <asm/mipsregs.h> #include <asm/uasm.h> diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 535e763ab1a6..6884e198e0c7 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -800,7 +800,7 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) * default mmap base, as well as whatever program they * might try to exec. This is because the brk will * follow the loader, and is not movable. */ -#ifdef CONFIG_X86 +#if defined(CONFIG_X86) || defined(CONFIG_ARM) load_bias = 0; #else load_bias = ELF_PAGESTART(ELF_ET_DYN_BASE - vaddr); diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 5dbf4dba03c4..a367dd044280 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -1849,8 +1849,8 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) goto failed_mount; } - if (le32_to_cpu(es->s_blocks_count) > - (sector_t)(~0ULL) >> (sb->s_blocksize_bits - 9)) { + if (generic_check_addressable(sb->s_blocksize_bits, + le32_to_cpu(es->s_blocks_count))) { ext3_msg(sb, KERN_ERR, "error: filesystem is too large to mount safely"); if (sizeof(sector_t) < 8) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 26147746c272..7f47c366bf15 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2831,15 +2831,13 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) * Test whether we have more sectors than will fit in sector_t, * and whether the max offset is addressable by the page cache. */ - if ((ext4_blocks_count(es) > - (sector_t)(~0ULL) >> (sb->s_blocksize_bits - 9)) || - (ext4_blocks_count(es) > - (pgoff_t)(~0ULL) >> (PAGE_CACHE_SHIFT - sb->s_blocksize_bits))) { + ret = generic_check_addressable(sb->s_blocksize_bits, + ext4_blocks_count(es)); + if (ret) { ext4_msg(sb, KERN_ERR, "filesystem" " too large to mount safely on this system"); if (sizeof(sector_t) < 8) ext4_msg(sb, KERN_WARNING, "CONFIG_LBDAF not enabled"); - ret = -EFBIG; goto failed_mount; } diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 0e8014ea6b94..262419f83d80 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1371,6 +1371,10 @@ int jbd2_journal_check_used_features (journal_t *journal, unsigned long compat, if (!compat && !ro && !incompat) return 1; + /* Load journal superblock if it is not loaded yet. */ + if (journal->j_format_version == 0 && + journal_get_superblock(journal) != 0) + return 0; if (journal->j_format_version == 1) return 0; diff --git a/fs/libfs.c b/fs/libfs.c index 0a9da95317f7..62baa0387d6e 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -913,6 +913,35 @@ int generic_file_fsync(struct file *file, int datasync) } EXPORT_SYMBOL(generic_file_fsync); +/** + * generic_check_addressable - Check addressability of file system + * @blocksize_bits: log of file system block size + * @num_blocks: number of blocks in file system + * + * Determine whether a file system with @num_blocks blocks (and a + * block size of 2**@blocksize_bits) is addressable by the sector_t + * and page cache of the system. Return 0 if so and -EFBIG otherwise. + */ +int generic_check_addressable(unsigned blocksize_bits, u64 num_blocks) +{ + u64 last_fs_block = num_blocks - 1; + u64 last_fs_page = + last_fs_block >> (PAGE_CACHE_SHIFT - blocksize_bits); + + if (unlikely(num_blocks == 0)) + return 0; + + if ((blocksize_bits < 9) || (blocksize_bits > PAGE_CACHE_SHIFT)) + return -EINVAL; + + if ((last_fs_block > (sector_t)(~0ULL) >> (blocksize_bits - 9)) || + (last_fs_page > (pgoff_t)(~0ULL))) { + return -EFBIG; + } + return 0; +} +EXPORT_SYMBOL(generic_check_addressable); + /* * No-op implementation of ->fsync for in-memory filesystems. */ diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 0de69c9a08be..5cfeee118158 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -883,8 +883,8 @@ struct ocfs2_write_ctxt { * out in so that future reads from that region will get * zero's. */ - struct page *w_pages[OCFS2_MAX_CTXT_PAGES]; unsigned int w_num_pages; + struct page *w_pages[OCFS2_MAX_CTXT_PAGES]; struct page *w_target_page; /* @@ -1642,7 +1642,8 @@ static int ocfs2_zero_tail(struct inode *inode, struct buffer_head *di_bh, return ret; } -int ocfs2_write_begin_nolock(struct address_space *mapping, +int ocfs2_write_begin_nolock(struct file *filp, + struct address_space *mapping, loff_t pos, unsigned len, unsigned flags, struct page **pagep, void **fsdata, struct buffer_head *di_bh, struct page *mmap_page) @@ -1692,7 +1693,7 @@ int ocfs2_write_begin_nolock(struct address_space *mapping, mlog_errno(ret); goto out; } else if (ret == 1) { - ret = ocfs2_refcount_cow(inode, di_bh, + ret = ocfs2_refcount_cow(inode, filp, di_bh, wc->w_cpos, wc->w_clen, UINT_MAX); if (ret) { mlog_errno(ret); @@ -1854,7 +1855,7 @@ static int ocfs2_write_begin(struct file *file, struct address_space *mapping, */ down_write(&OCFS2_I(inode)->ip_alloc_sem); - ret = ocfs2_write_begin_nolock(mapping, pos, len, flags, pagep, + ret = ocfs2_write_begin_nolock(file, mapping, pos, len, flags, pagep, fsdata, di_bh, NULL); if (ret) { mlog_errno(ret); diff --git a/fs/ocfs2/aops.h b/fs/ocfs2/aops.h index c48e93ffc513..7606f663da6d 100644 --- a/fs/ocfs2/aops.h +++ b/fs/ocfs2/aops.h @@ -48,7 +48,8 @@ int ocfs2_write_end_nolock(struct address_space *mapping, loff_t pos, unsigned len, unsigned copied, struct page *page, void *fsdata); -int ocfs2_write_begin_nolock(struct address_space *mapping, +int ocfs2_write_begin_nolock(struct file *filp, + struct address_space *mapping, loff_t pos, unsigned len, unsigned flags, struct page **pagep, void **fsdata, struct buffer_head *di_bh, struct page *mmap_page); diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index 41d5f1f92d56..52c7557f3e25 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -62,10 +62,51 @@ static unsigned long o2hb_live_node_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; static LIST_HEAD(o2hb_node_events); static DECLARE_WAIT_QUEUE_HEAD(o2hb_steady_queue); +/* + * In global heartbeat, we maintain a series of region bitmaps. + * - o2hb_region_bitmap allows us to limit the region number to max region. + * - o2hb_live_region_bitmap tracks live regions (seen steady iterations). + * - o2hb_quorum_region_bitmap tracks live regions that have seen all nodes + * heartbeat on it. + * - o2hb_failed_region_bitmap tracks the regions that have seen io timeouts. + */ +static unsigned long o2hb_region_bitmap[BITS_TO_LONGS(O2NM_MAX_REGIONS)]; +static unsigned long o2hb_live_region_bitmap[BITS_TO_LONGS(O2NM_MAX_REGIONS)]; +static unsigned long o2hb_quorum_region_bitmap[BITS_TO_LONGS(O2NM_MAX_REGIONS)]; +static unsigned long o2hb_failed_region_bitmap[BITS_TO_LONGS(O2NM_MAX_REGIONS)]; + +#define O2HB_DB_TYPE_LIVENODES 0 +#define O2HB_DB_TYPE_LIVEREGIONS 1 +#define O2HB_DB_TYPE_QUORUMREGIONS 2 +#define O2HB_DB_TYPE_FAILEDREGIONS 3 +#define O2HB_DB_TYPE_REGION_LIVENODES 4 +#define O2HB_DB_TYPE_REGION_NUMBER 5 +#define O2HB_DB_TYPE_REGION_ELAPSED_TIME 6 +struct o2hb_debug_buf { + int db_type; + int db_size; + int db_len; + void *db_data; +}; + +static struct o2hb_debug_buf *o2hb_db_livenodes; +static struct o2hb_debug_buf *o2hb_db_liveregions; +static struct o2hb_debug_buf *o2hb_db_quorumregions; +static struct o2hb_debug_buf *o2hb_db_failedregions; + #define O2HB_DEBUG_DIR "o2hb" #define O2HB_DEBUG_LIVENODES "livenodes" +#define O2HB_DEBUG_LIVEREGIONS "live_regions" +#define O2HB_DEBUG_QUORUMREGIONS "quorum_regions" +#define O2HB_DEBUG_FAILEDREGIONS "failed_regions" +#define O2HB_DEBUG_REGION_NUMBER "num" +#define O2HB_DEBUG_REGION_ELAPSED_TIME "elapsed_time_in_ms" + static struct dentry *o2hb_debug_dir; static struct dentry *o2hb_debug_livenodes; +static struct dentry *o2hb_debug_liveregions; +static struct dentry *o2hb_debug_quorumregions; +static struct dentry *o2hb_debug_failedregions; static LIST_HEAD(o2hb_all_regions); @@ -77,7 +118,19 @@ static struct o2hb_callback *hbcall_from_type(enum o2hb_callback_type type); #define O2HB_DEFAULT_BLOCK_BITS 9 +enum o2hb_heartbeat_modes { + O2HB_HEARTBEAT_LOCAL = 0, + O2HB_HEARTBEAT_GLOBAL, + O2HB_HEARTBEAT_NUM_MODES, +}; + +char *o2hb_heartbeat_mode_desc[O2HB_HEARTBEAT_NUM_MODES] = { + "local", /* O2HB_HEARTBEAT_LOCAL */ + "global", /* O2HB_HEARTBEAT_GLOBAL */ +}; + unsigned int o2hb_dead_threshold = O2HB_DEFAULT_DEAD_THRESHOLD; +unsigned int o2hb_heartbeat_mode = O2HB_HEARTBEAT_LOCAL; /* Only sets a new threshold if there are no active regions. * @@ -94,6 +147,22 @@ static void o2hb_dead_threshold_set(unsigned int threshold) } } +static int o2hb_global_hearbeat_mode_set(unsigned int hb_mode) +{ + int ret = -1; + + if (hb_mode < O2HB_HEARTBEAT_NUM_MODES) { + spin_lock(&o2hb_live_lock); + if (list_empty(&o2hb_all_regions)) { + o2hb_heartbeat_mode = hb_mode; + ret = 0; + } + spin_unlock(&o2hb_live_lock); + } + + return ret; +} + struct o2hb_node_event { struct list_head hn_item; enum o2hb_callback_type hn_event_type; @@ -135,6 +204,18 @@ struct o2hb_region { struct block_device *hr_bdev; struct o2hb_disk_slot *hr_slots; + /* live node map of this region */ + unsigned long hr_live_node_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; + unsigned int hr_region_num; + + struct dentry *hr_debug_dir; + struct dentry *hr_debug_livenodes; + struct dentry *hr_debug_regnum; + struct dentry *hr_debug_elapsed_time; + struct o2hb_debug_buf *hr_db_livenodes; + struct o2hb_debug_buf *hr_db_regnum; + struct o2hb_debug_buf *hr_db_elapsed_time; + /* let the person setting up hb wait for it to return until it * has reached a 'steady' state. This will be fixed when we have * a more complete api that doesn't lead to this sort of fragility. */ @@ -163,8 +244,19 @@ struct o2hb_bio_wait_ctxt { int wc_error; }; +static int o2hb_pop_count(void *map, int count) +{ + int i = -1, pop = 0; + + while ((i = find_next_bit(map, count, i + 1)) < count) + pop++; + return pop; +} + static void o2hb_write_timeout(struct work_struct *work) { + int failed, quorum; + unsigned long flags; struct o2hb_region *reg = container_of(work, struct o2hb_region, hr_write_timeout_work.work); @@ -172,6 +264,28 @@ static void o2hb_write_timeout(struct work_struct *work) mlog(ML_ERROR, "Heartbeat write timeout to device %s after %u " "milliseconds\n", reg->hr_dev_name, jiffies_to_msecs(jiffies - reg->hr_last_timeout_start)); + + if (o2hb_global_heartbeat_active()) { + spin_lock_irqsave(&o2hb_live_lock, flags); + if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap)) + set_bit(reg->hr_region_num, o2hb_failed_region_bitmap); + failed = o2hb_pop_count(&o2hb_failed_region_bitmap, + O2NM_MAX_REGIONS); + quorum = o2hb_pop_count(&o2hb_quorum_region_bitmap, + O2NM_MAX_REGIONS); + spin_unlock_irqrestore(&o2hb_live_lock, flags); + + mlog(ML_HEARTBEAT, "Number of regions %d, failed regions %d\n", + quorum, failed); + + /* + * Fence if the number of failed regions >= half the number + * of quorum regions + */ + if ((failed << 1) < quorum) + return; + } + o2quo_disk_timeout(); } @@ -180,6 +294,11 @@ static void o2hb_arm_write_timeout(struct o2hb_region *reg) mlog(ML_HEARTBEAT, "Queue write timeout for %u ms\n", O2HB_MAX_WRITE_TIMEOUT_MS); + if (o2hb_global_heartbeat_active()) { + spin_lock(&o2hb_live_lock); + clear_bit(reg->hr_region_num, o2hb_failed_region_bitmap); + spin_unlock(&o2hb_live_lock); + } cancel_delayed_work(®->hr_write_timeout_work); reg->hr_last_timeout_start = jiffies; schedule_delayed_work(®->hr_write_timeout_work, @@ -513,6 +632,8 @@ static void o2hb_queue_node_event(struct o2hb_node_event *event, { assert_spin_locked(&o2hb_live_lock); + BUG_ON((!node) && (type != O2HB_NODE_DOWN_CB)); + event->hn_event_type = type; event->hn_node = node; event->hn_node_num = node_num; @@ -554,6 +675,35 @@ static void o2hb_shutdown_slot(struct o2hb_disk_slot *slot) o2nm_node_put(node); } +static void o2hb_set_quorum_device(struct o2hb_region *reg, + struct o2hb_disk_slot *slot) +{ + assert_spin_locked(&o2hb_live_lock); + + if (!o2hb_global_heartbeat_active()) + return; + + if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap)) + return; + + /* + * A region can be added to the quorum only when it sees all + * live nodes heartbeat on it. In other words, the region has been + * added to all nodes. + */ + if (memcmp(reg->hr_live_node_bitmap, o2hb_live_node_bitmap, + sizeof(o2hb_live_node_bitmap))) + return; + + if (slot->ds_changed_samples < O2HB_LIVE_THRESHOLD) + return; + + printk(KERN_NOTICE "o2hb: Region %s is now a quorum device\n", + config_item_name(®->hr_item)); + + set_bit(reg->hr_region_num, o2hb_quorum_region_bitmap); +} + static int o2hb_check_slot(struct o2hb_region *reg, struct o2hb_disk_slot *slot) { @@ -565,14 +715,22 @@ static int o2hb_check_slot(struct o2hb_region *reg, u64 cputime; unsigned int dead_ms = o2hb_dead_threshold * O2HB_REGION_TIMEOUT_MS; unsigned int slot_dead_ms; + int tmp; memcpy(hb_block, slot->ds_raw_block, reg->hr_block_bytes); - /* Is this correct? Do we assume that the node doesn't exist - * if we're not configured for him? */ + /* + * If a node is no longer configured but is still in the livemap, we + * may need to clear that bit from the livemap. + */ node = o2nm_get_node_by_num(slot->ds_node_num); - if (!node) - return 0; + if (!node) { + spin_lock(&o2hb_live_lock); + tmp = test_bit(slot->ds_node_num, o2hb_live_node_bitmap); + spin_unlock(&o2hb_live_lock); + if (!tmp) + return 0; + } if (!o2hb_verify_crc(reg, hb_block)) { /* all paths from here will drop o2hb_live_lock for @@ -639,8 +797,12 @@ fire_callbacks: mlog(ML_HEARTBEAT, "Node %d (id 0x%llx) joined my region\n", slot->ds_node_num, (long long)slot->ds_last_generation); + set_bit(slot->ds_node_num, reg->hr_live_node_bitmap); + /* first on the list generates a callback */ if (list_empty(&o2hb_live_slots[slot->ds_node_num])) { + mlog(ML_HEARTBEAT, "o2hb: Add node %d to live nodes " + "bitmap\n", slot->ds_node_num); set_bit(slot->ds_node_num, o2hb_live_node_bitmap); o2hb_queue_node_event(&event, O2HB_NODE_UP_CB, node, @@ -684,13 +846,18 @@ fire_callbacks: mlog(ML_HEARTBEAT, "Node %d left my region\n", slot->ds_node_num); + clear_bit(slot->ds_node_num, reg->hr_live_node_bitmap); + /* last off the live_slot generates a callback */ list_del_init(&slot->ds_live_item); if (list_empty(&o2hb_live_slots[slot->ds_node_num])) { + mlog(ML_HEARTBEAT, "o2hb: Remove node %d from live " + "nodes bitmap\n", slot->ds_node_num); clear_bit(slot->ds_node_num, o2hb_live_node_bitmap); - o2hb_queue_node_event(&event, O2HB_NODE_DOWN_CB, node, - slot->ds_node_num); + /* node can be null */ + o2hb_queue_node_event(&event, O2HB_NODE_DOWN_CB, + node, slot->ds_node_num); changed = 1; } @@ -706,11 +873,14 @@ fire_callbacks: slot->ds_equal_samples = 0; } out: + o2hb_set_quorum_device(reg, slot); + spin_unlock(&o2hb_live_lock); o2hb_run_event_list(&event); - o2nm_node_put(node); + if (node) + o2nm_node_put(node); return changed; } @@ -737,6 +907,7 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) { int i, ret, highest_node, change = 0; unsigned long configured_nodes[BITS_TO_LONGS(O2NM_MAX_NODES)]; + unsigned long live_node_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; struct o2hb_bio_wait_ctxt write_wc; ret = o2nm_configured_node_map(configured_nodes, @@ -746,6 +917,17 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) return ret; } + /* + * If a node is not configured but is in the livemap, we still need + * to read the slot so as to be able to remove it from the livemap. + */ + o2hb_fill_node_map(live_node_bitmap, sizeof(live_node_bitmap)); + i = -1; + while ((i = find_next_bit(live_node_bitmap, + O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES) { + set_bit(i, configured_nodes); + } + highest_node = o2hb_highest_node(configured_nodes, O2NM_MAX_NODES); if (highest_node >= O2NM_MAX_NODES) { mlog(ML_NOTICE, "ocfs2_heartbeat: no configured nodes found!\n"); @@ -917,21 +1099,59 @@ static int o2hb_thread(void *data) #ifdef CONFIG_DEBUG_FS static int o2hb_debug_open(struct inode *inode, struct file *file) { + struct o2hb_debug_buf *db = inode->i_private; + struct o2hb_region *reg; unsigned long map[BITS_TO_LONGS(O2NM_MAX_NODES)]; char *buf = NULL; int i = -1; int out = 0; + /* max_nodes should be the largest bitmap we pass here */ + BUG_ON(sizeof(map) < db->db_size); + buf = kmalloc(PAGE_SIZE, GFP_KERNEL); if (!buf) goto bail; - o2hb_fill_node_map(map, sizeof(map)); + switch (db->db_type) { + case O2HB_DB_TYPE_LIVENODES: + case O2HB_DB_TYPE_LIVEREGIONS: + case O2HB_DB_TYPE_QUORUMREGIONS: + case O2HB_DB_TYPE_FAILEDREGIONS: + spin_lock(&o2hb_live_lock); + memcpy(map, db->db_data, db->db_size); + spin_unlock(&o2hb_live_lock); + break; + + case O2HB_DB_TYPE_REGION_LIVENODES: + spin_lock(&o2hb_live_lock); + reg = (struct o2hb_region *)db->db_data; + memcpy(map, reg->hr_live_node_bitmap, db->db_size); + spin_unlock(&o2hb_live_lock); + break; + + case O2HB_DB_TYPE_REGION_NUMBER: + reg = (struct o2hb_region *)db->db_data; + out += snprintf(buf + out, PAGE_SIZE - out, "%d\n", + reg->hr_region_num); + goto done; + + case O2HB_DB_TYPE_REGION_ELAPSED_TIME: + reg = (struct o2hb_region *)db->db_data; + out += snprintf(buf + out, PAGE_SIZE - out, "%u\n", + jiffies_to_msecs(jiffies - + reg->hr_last_timeout_start)); + goto done; + + default: + goto done; + } - while ((i = find_next_bit(map, O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES) + while ((i = find_next_bit(map, db->db_len, i + 1)) < db->db_len) out += snprintf(buf + out, PAGE_SIZE - out, "%d ", i); out += snprintf(buf + out, PAGE_SIZE - out, "\n"); +done: i_size_write(inode, out); file->private_data = buf; @@ -978,10 +1198,104 @@ static const struct file_operations o2hb_debug_fops = { void o2hb_exit(void) { - if (o2hb_debug_livenodes) - debugfs_remove(o2hb_debug_livenodes); - if (o2hb_debug_dir) - debugfs_remove(o2hb_debug_dir); + kfree(o2hb_db_livenodes); + kfree(o2hb_db_liveregions); + kfree(o2hb_db_quorumregions); + kfree(o2hb_db_failedregions); + debugfs_remove(o2hb_debug_failedregions); + debugfs_remove(o2hb_debug_quorumregions); + debugfs_remove(o2hb_debug_liveregions); + debugfs_remove(o2hb_debug_livenodes); + debugfs_remove(o2hb_debug_dir); +} + +static struct dentry *o2hb_debug_create(const char *name, struct dentry *dir, + struct o2hb_debug_buf **db, int db_len, + int type, int size, int len, void *data) +{ + *db = kmalloc(db_len, GFP_KERNEL); + if (!*db) + return NULL; + + (*db)->db_type = type; + (*db)->db_size = size; + (*db)->db_len = len; + (*db)->db_data = data; + + return debugfs_create_file(name, S_IFREG|S_IRUSR, dir, *db, + &o2hb_debug_fops); +} + +static int o2hb_debug_init(void) +{ + int ret = -ENOMEM; + + o2hb_debug_dir = debugfs_create_dir(O2HB_DEBUG_DIR, NULL); + if (!o2hb_debug_dir) { + mlog_errno(ret); + goto bail; + } + + o2hb_debug_livenodes = o2hb_debug_create(O2HB_DEBUG_LIVENODES, + o2hb_debug_dir, + &o2hb_db_livenodes, + sizeof(*o2hb_db_livenodes), + O2HB_DB_TYPE_LIVENODES, + sizeof(o2hb_live_node_bitmap), + O2NM_MAX_NODES, + o2hb_live_node_bitmap); + if (!o2hb_debug_livenodes) { + mlog_errno(ret); + goto bail; + } + + o2hb_debug_liveregions = o2hb_debug_create(O2HB_DEBUG_LIVEREGIONS, + o2hb_debug_dir, + &o2hb_db_liveregions, + sizeof(*o2hb_db_liveregions), + O2HB_DB_TYPE_LIVEREGIONS, + sizeof(o2hb_live_region_bitmap), + O2NM_MAX_REGIONS, + o2hb_live_region_bitmap); + if (!o2hb_debug_liveregions) { + mlog_errno(ret); + goto bail; + } + + o2hb_debug_quorumregions = + o2hb_debug_create(O2HB_DEBUG_QUORUMREGIONS, + o2hb_debug_dir, + &o2hb_db_quorumregions, + sizeof(*o2hb_db_quorumregions), + O2HB_DB_TYPE_QUORUMREGIONS, + sizeof(o2hb_quorum_region_bitmap), + O2NM_MAX_REGIONS, + o2hb_quorum_region_bitmap); + if (!o2hb_debug_quorumregions) { + mlog_errno(ret); + goto bail; + } + + o2hb_debug_failedregions = + o2hb_debug_create(O2HB_DEBUG_FAILEDREGIONS, + o2hb_debug_dir, + &o2hb_db_failedregions, + sizeof(*o2hb_db_failedregions), + O2HB_DB_TYPE_FAILEDREGIONS, + sizeof(o2hb_failed_region_bitmap), + O2NM_MAX_REGIONS, + o2hb_failed_region_bitmap); + if (!o2hb_debug_failedregions) { + mlog_errno(ret); + goto bail; + } + + ret = 0; +bail: + if (ret) + o2hb_exit(); + + return ret; } int o2hb_init(void) @@ -997,24 +1311,12 @@ int o2hb_init(void) INIT_LIST_HEAD(&o2hb_node_events); memset(o2hb_live_node_bitmap, 0, sizeof(o2hb_live_node_bitmap)); + memset(o2hb_region_bitmap, 0, sizeof(o2hb_region_bitmap)); + memset(o2hb_live_region_bitmap, 0, sizeof(o2hb_live_region_bitmap)); + memset(o2hb_quorum_region_bitmap, 0, sizeof(o2hb_quorum_region_bitmap)); + memset(o2hb_failed_region_bitmap, 0, sizeof(o2hb_failed_region_bitmap)); - o2hb_debug_dir = debugfs_create_dir(O2HB_DEBUG_DIR, NULL); - if (!o2hb_debug_dir) { - mlog_errno(-ENOMEM); - return -ENOMEM; - } - - o2hb_debug_livenodes = debugfs_create_file(O2HB_DEBUG_LIVENODES, - S_IFREG|S_IRUSR, - o2hb_debug_dir, NULL, - &o2hb_debug_fops); - if (!o2hb_debug_livenodes) { - mlog_errno(-ENOMEM); - debugfs_remove(o2hb_debug_dir); - return -ENOMEM; - } - - return 0; + return o2hb_debug_init(); } /* if we're already in a callback then we're already serialized by the sem */ @@ -1078,6 +1380,13 @@ static void o2hb_region_release(struct config_item *item) if (reg->hr_slots) kfree(reg->hr_slots); + kfree(reg->hr_db_regnum); + kfree(reg->hr_db_livenodes); + debugfs_remove(reg->hr_debug_livenodes); + debugfs_remove(reg->hr_debug_regnum); + debugfs_remove(reg->hr_debug_elapsed_time); + debugfs_remove(reg->hr_debug_dir); + spin_lock(&o2hb_live_lock); list_del(®->hr_all_item); spin_unlock(&o2hb_live_lock); @@ -1441,6 +1750,8 @@ static ssize_t o2hb_region_dev_write(struct o2hb_region *reg, /* Ok, we were woken. Make sure it wasn't by drop_item() */ spin_lock(&o2hb_live_lock); hb_task = reg->hr_task; + if (o2hb_global_heartbeat_active()) + set_bit(reg->hr_region_num, o2hb_live_region_bitmap); spin_unlock(&o2hb_live_lock); if (hb_task) @@ -1448,6 +1759,10 @@ static ssize_t o2hb_region_dev_write(struct o2hb_region *reg, else ret = -EIO; + if (hb_task && o2hb_global_heartbeat_active()) + printk(KERN_NOTICE "o2hb: Heartbeat started on region %s\n", + config_item_name(®->hr_item)); + out: if (filp) fput(filp); @@ -1586,21 +1901,94 @@ static struct o2hb_heartbeat_group *to_o2hb_heartbeat_group(struct config_group : NULL; } +static int o2hb_debug_region_init(struct o2hb_region *reg, struct dentry *dir) +{ + int ret = -ENOMEM; + + reg->hr_debug_dir = + debugfs_create_dir(config_item_name(®->hr_item), dir); + if (!reg->hr_debug_dir) { + mlog_errno(ret); + goto bail; + } + + reg->hr_debug_livenodes = + o2hb_debug_create(O2HB_DEBUG_LIVENODES, + reg->hr_debug_dir, + &(reg->hr_db_livenodes), + sizeof(*(reg->hr_db_livenodes)), + O2HB_DB_TYPE_REGION_LIVENODES, + sizeof(reg->hr_live_node_bitmap), + O2NM_MAX_NODES, reg); + if (!reg->hr_debug_livenodes) { + mlog_errno(ret); + goto bail; + } + + reg->hr_debug_regnum = + o2hb_debug_create(O2HB_DEBUG_REGION_NUMBER, + reg->hr_debug_dir, + &(reg->hr_db_regnum), + sizeof(*(reg->hr_db_regnum)), + O2HB_DB_TYPE_REGION_NUMBER, + 0, O2NM_MAX_NODES, reg); + if (!reg->hr_debug_regnum) { + mlog_errno(ret); + goto bail; + } + + reg->hr_debug_elapsed_time = + o2hb_debug_create(O2HB_DEBUG_REGION_ELAPSED_TIME, + reg->hr_debug_dir, + &(reg->hr_db_elapsed_time), + sizeof(*(reg->hr_db_elapsed_time)), + O2HB_DB_TYPE_REGION_ELAPSED_TIME, + 0, 0, reg); + if (!reg->hr_debug_elapsed_time) { + mlog_errno(ret); + goto bail; + } + + ret = 0; +bail: + return ret; +} + static struct config_item *o2hb_heartbeat_group_make_item(struct config_group *group, const char *name) { struct o2hb_region *reg = NULL; + int ret; reg = kzalloc(sizeof(struct o2hb_region), GFP_KERNEL); if (reg == NULL) return ERR_PTR(-ENOMEM); - config_item_init_type_name(®->hr_item, name, &o2hb_region_type); + if (strlen(name) > O2HB_MAX_REGION_NAME_LEN) + return ERR_PTR(-ENAMETOOLONG); spin_lock(&o2hb_live_lock); + reg->hr_region_num = 0; + if (o2hb_global_heartbeat_active()) { + reg->hr_region_num = find_first_zero_bit(o2hb_region_bitmap, + O2NM_MAX_REGIONS); + if (reg->hr_region_num >= O2NM_MAX_REGIONS) { + spin_unlock(&o2hb_live_lock); + return ERR_PTR(-EFBIG); + } + set_bit(reg->hr_region_num, o2hb_region_bitmap); + } list_add_tail(®->hr_all_item, &o2hb_all_regions); spin_unlock(&o2hb_live_lock); + config_item_init_type_name(®->hr_item, name, &o2hb_region_type); + + ret = o2hb_debug_region_init(reg, o2hb_debug_dir); + if (ret) { + config_item_put(®->hr_item); + return ERR_PTR(ret); + } + return ®->hr_item; } @@ -1612,6 +2000,10 @@ static void o2hb_heartbeat_group_drop_item(struct config_group *group, /* stop the thread when the user removes the region dir */ spin_lock(&o2hb_live_lock); + if (o2hb_global_heartbeat_active()) { + clear_bit(reg->hr_region_num, o2hb_region_bitmap); + clear_bit(reg->hr_region_num, o2hb_live_region_bitmap); + } hb_task = reg->hr_task; reg->hr_task = NULL; spin_unlock(&o2hb_live_lock); @@ -1628,6 +2020,9 @@ static void o2hb_heartbeat_group_drop_item(struct config_group *group, wake_up(&o2hb_steady_queue); } + if (o2hb_global_heartbeat_active()) + printk(KERN_NOTICE "o2hb: Heartbeat stopped on region %s\n", + config_item_name(®->hr_item)); config_item_put(item); } @@ -1688,6 +2083,41 @@ static ssize_t o2hb_heartbeat_group_threshold_store(struct o2hb_heartbeat_group return count; } +static +ssize_t o2hb_heartbeat_group_mode_show(struct o2hb_heartbeat_group *group, + char *page) +{ + return sprintf(page, "%s\n", + o2hb_heartbeat_mode_desc[o2hb_heartbeat_mode]); +} + +static +ssize_t o2hb_heartbeat_group_mode_store(struct o2hb_heartbeat_group *group, + const char *page, size_t count) +{ + unsigned int i; + int ret; + size_t len; + + len = (page[count - 1] == '\n') ? count - 1 : count; + if (!len) + return -EINVAL; + + for (i = 0; i < O2HB_HEARTBEAT_NUM_MODES; ++i) { + if (strnicmp(page, o2hb_heartbeat_mode_desc[i], len)) + continue; + + ret = o2hb_global_hearbeat_mode_set(i); + if (!ret) + printk(KERN_NOTICE "o2hb: Heartbeat mode set to %s\n", + o2hb_heartbeat_mode_desc[i]); + return count; + } + + return -EINVAL; + +} + static struct o2hb_heartbeat_group_attribute o2hb_heartbeat_group_attr_threshold = { .attr = { .ca_owner = THIS_MODULE, .ca_name = "dead_threshold", @@ -1696,8 +2126,17 @@ static struct o2hb_heartbeat_group_attribute o2hb_heartbeat_group_attr_threshold .store = o2hb_heartbeat_group_threshold_store, }; +static struct o2hb_heartbeat_group_attribute o2hb_heartbeat_group_attr_mode = { + .attr = { .ca_owner = THIS_MODULE, + .ca_name = "mode", + .ca_mode = S_IRUGO | S_IWUSR }, + .show = o2hb_heartbeat_group_mode_show, + .store = o2hb_heartbeat_group_mode_store, +}; + static struct configfs_attribute *o2hb_heartbeat_group_attrs[] = { &o2hb_heartbeat_group_attr_threshold.attr, + &o2hb_heartbeat_group_attr_mode.attr, NULL, }; @@ -1963,3 +2402,34 @@ void o2hb_stop_all_regions(void) spin_unlock(&o2hb_live_lock); } EXPORT_SYMBOL_GPL(o2hb_stop_all_regions); + +int o2hb_get_all_regions(char *region_uuids, u8 max_regions) +{ + struct o2hb_region *reg; + int numregs = 0; + char *p; + + spin_lock(&o2hb_live_lock); + + p = region_uuids; + list_for_each_entry(reg, &o2hb_all_regions, hr_all_item) { + mlog(0, "Region: %s\n", config_item_name(®->hr_item)); + if (numregs < max_regions) { + memcpy(p, config_item_name(®->hr_item), + O2HB_MAX_REGION_NAME_LEN); + p += O2HB_MAX_REGION_NAME_LEN; + } + numregs++; + } + + spin_unlock(&o2hb_live_lock); + + return numregs; +} +EXPORT_SYMBOL_GPL(o2hb_get_all_regions); + +int o2hb_global_heartbeat_active(void) +{ + return (o2hb_heartbeat_mode == O2HB_HEARTBEAT_GLOBAL); +} +EXPORT_SYMBOL(o2hb_global_heartbeat_active); diff --git a/fs/ocfs2/cluster/heartbeat.h b/fs/ocfs2/cluster/heartbeat.h index 2f1649253b49..00ad8e8fea51 100644 --- a/fs/ocfs2/cluster/heartbeat.h +++ b/fs/ocfs2/cluster/heartbeat.h @@ -31,6 +31,8 @@ #define O2HB_REGION_TIMEOUT_MS 2000 +#define O2HB_MAX_REGION_NAME_LEN 32 + /* number of changes to be seen as live */ #define O2HB_LIVE_THRESHOLD 2 /* number of equal samples to be seen as dead */ @@ -81,5 +83,7 @@ int o2hb_check_node_heartbeating(u8 node_num); int o2hb_check_node_heartbeating_from_callback(u8 node_num); int o2hb_check_local_node_heartbeating(void); void o2hb_stop_all_regions(void); +int o2hb_get_all_regions(char *region_uuids, u8 numregions); +int o2hb_global_heartbeat_active(void); #endif /* O2CLUSTER_HEARTBEAT_H */ diff --git a/fs/ocfs2/cluster/masklog.h b/fs/ocfs2/cluster/masklog.h index fd96e2a2fa56..ea2ed9f56c94 100644 --- a/fs/ocfs2/cluster/masklog.h +++ b/fs/ocfs2/cluster/masklog.h @@ -119,7 +119,8 @@ #define ML_ERROR 0x0000000100000000ULL /* sent to KERN_ERR */ #define ML_NOTICE 0x0000000200000000ULL /* setn to KERN_NOTICE */ #define ML_KTHREAD 0x0000000400000000ULL /* kernel thread activity */ -#define ML_RESERVATIONS 0x0000000800000000ULL /* ocfs2 alloc reservations */ +#define ML_RESERVATIONS 0x0000000800000000ULL /* ocfs2 alloc reservations */ +#define ML_CLUSTER 0x0000001000000000ULL /* cluster stack */ #define MLOG_INITIAL_AND_MASK (ML_ERROR|ML_NOTICE) #define MLOG_INITIAL_NOT_MASK (ML_ENTRY|ML_EXIT) diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c index ed0c9f367fed..bb240647ca5f 100644 --- a/fs/ocfs2/cluster/nodemanager.c +++ b/fs/ocfs2/cluster/nodemanager.c @@ -711,6 +711,8 @@ static struct config_item *o2nm_node_group_make_item(struct config_group *group, config_item_init_type_name(&node->nd_item, name, &o2nm_node_type); spin_lock_init(&node->nd_lock); + mlog(ML_CLUSTER, "o2nm: Registering node %s\n", name); + return &node->nd_item; } @@ -744,6 +746,9 @@ static void o2nm_node_group_drop_item(struct config_group *group, } write_unlock(&cluster->cl_nodes_lock); + mlog(ML_CLUSTER, "o2nm: Unregistered node %s\n", + config_item_name(&node->nd_item)); + config_item_put(item); } diff --git a/fs/ocfs2/cluster/ocfs2_nodemanager.h b/fs/ocfs2/cluster/ocfs2_nodemanager.h index 5b9854bad571..49b594325bec 100644 --- a/fs/ocfs2/cluster/ocfs2_nodemanager.h +++ b/fs/ocfs2/cluster/ocfs2_nodemanager.h @@ -36,4 +36,10 @@ /* host name, group name, cluster name all 64 bytes */ #define O2NM_MAX_NAME_LEN 64 // __NEW_UTS_LEN +/* + * Maximum number of global heartbeat regions allowed. + * **CAUTION** Changing this number will break dlm compatibility. + */ +#define O2NM_MAX_REGIONS 32 + #endif /* _OCFS2_NODEMANAGER_H */ diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index cbe2f057cc28..9aa426e42123 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -1696,6 +1696,9 @@ static void o2net_hb_node_down_cb(struct o2nm_node *node, int node_num, { o2quo_hb_down(node_num); + if (!node) + return; + if (node_num != o2nm_this_node()) o2net_disconnect_node(node); @@ -1709,6 +1712,8 @@ static void o2net_hb_node_up_cb(struct o2nm_node *node, int node_num, o2quo_hb_up(node_num); + BUG_ON(!node); + /* ensure an immediate connect attempt */ nn->nn_last_connect_attempt = jiffies - (msecs_to_jiffies(o2net_reconnect_delay()) + 1); diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c index b4957c7d9fe2..edaded48e7e9 100644 --- a/fs/ocfs2/dcache.c +++ b/fs/ocfs2/dcache.c @@ -40,6 +40,14 @@ #include "inode.h" #include "super.h" +void ocfs2_dentry_attach_gen(struct dentry *dentry) +{ + unsigned long gen = + OCFS2_I(dentry->d_parent->d_inode)->ip_dir_lock_gen; + BUG_ON(dentry->d_inode); + dentry->d_fsdata = (void *)gen; +} + static int ocfs2_dentry_revalidate(struct dentry *dentry, struct nameidata *nd) @@ -51,11 +59,20 @@ static int ocfs2_dentry_revalidate(struct dentry *dentry, mlog_entry("(0x%p, '%.*s')\n", dentry, dentry->d_name.len, dentry->d_name.name); - /* Never trust a negative dentry - force a new lookup. */ + /* For a negative dentry - + * check the generation number of the parent and compare with the + * one stored in the inode. + */ if (inode == NULL) { - mlog(0, "negative dentry: %.*s\n", dentry->d_name.len, - dentry->d_name.name); - goto bail; + unsigned long gen = (unsigned long) dentry->d_fsdata; + unsigned long pgen = + OCFS2_I(dentry->d_parent->d_inode)->ip_dir_lock_gen; + mlog(0, "negative dentry: %.*s parent gen: %lu " + "dentry gen: %lu\n", + dentry->d_name.len, dentry->d_name.name, pgen, gen); + if (gen != pgen) + goto bail; + goto valid; } BUG_ON(!osb); @@ -96,6 +113,7 @@ static int ocfs2_dentry_revalidate(struct dentry *dentry, goto bail; } +valid: ret = 1; bail: @@ -227,6 +245,12 @@ int ocfs2_dentry_attach_lock(struct dentry *dentry, if (!inode) return 0; + if (!dentry->d_inode && dentry->d_fsdata) { + /* Converting a negative dentry to positive + Clear dentry->d_fsdata */ + dentry->d_fsdata = dl = NULL; + } + if (dl) { mlog_bug_on_msg(dl->dl_parent_blkno != parent_blkno, " \"%.*s\": old parent: %llu, new: %llu\n", @@ -452,6 +476,7 @@ static void ocfs2_dentry_iput(struct dentry *dentry, struct inode *inode) out: iput(inode); + ocfs2_dentry_attach_gen(dentry); } /* diff --git a/fs/ocfs2/dcache.h b/fs/ocfs2/dcache.h index f5dd1789acf1..b79eff709958 100644 --- a/fs/ocfs2/dcache.h +++ b/fs/ocfs2/dcache.h @@ -64,5 +64,6 @@ void ocfs2_dentry_move(struct dentry *dentry, struct dentry *target, struct inode *old_dir, struct inode *new_dir); extern spinlock_t dentry_attach_lock; +void ocfs2_dentry_attach_gen(struct dentry *dentry); #endif /* OCFS2_DCACHE_H */ diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h index 765298908f1d..b36d0bf77a5a 100644 --- a/fs/ocfs2/dlm/dlmcommon.h +++ b/fs/ocfs2/dlm/dlmcommon.h @@ -445,7 +445,9 @@ enum { DLM_LOCK_REQUEST_MSG, /* 515 */ DLM_RECO_DATA_DONE_MSG, /* 516 */ DLM_BEGIN_RECO_MSG, /* 517 */ - DLM_FINALIZE_RECO_MSG /* 518 */ + DLM_FINALIZE_RECO_MSG, /* 518 */ + DLM_QUERY_REGION, /* 519 */ + DLM_QUERY_NODEINFO, /* 520 */ }; struct dlm_reco_node_data @@ -727,6 +729,31 @@ struct dlm_cancel_join u8 domain[O2NM_MAX_NAME_LEN]; }; +struct dlm_query_region { + u8 qr_node; + u8 qr_numregions; + u8 qr_namelen; + u8 pad1; + u8 qr_domain[O2NM_MAX_NAME_LEN]; + u8 qr_regions[O2HB_MAX_REGION_NAME_LEN * O2NM_MAX_REGIONS]; +}; + +struct dlm_node_info { + u8 ni_nodenum; + u8 pad1; + u16 ni_ipv4_port; + u32 ni_ipv4_address; +}; + +struct dlm_query_nodeinfo { + u8 qn_nodenum; + u8 qn_numnodes; + u8 qn_namelen; + u8 pad1; + u8 qn_domain[O2NM_MAX_NAME_LEN]; + struct dlm_node_info qn_nodes[O2NM_MAX_NODES]; +}; + struct dlm_exit_domain { u8 node_idx; diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c index 901ca52bf86b..272ec8631a51 100644 --- a/fs/ocfs2/dlm/dlmdebug.c +++ b/fs/ocfs2/dlm/dlmdebug.c @@ -493,7 +493,7 @@ static int debug_mle_print(struct dlm_ctxt *dlm, struct debug_buffer *db) struct hlist_head *bucket; struct hlist_node *list; int i, out = 0; - unsigned long total = 0, longest = 0, bktcnt; + unsigned long total = 0, longest = 0, bucket_count = 0; out += snprintf(db->buf + out, db->len - out, "Dumping MLEs for Domain: %s\n", dlm->name); @@ -505,13 +505,13 @@ static int debug_mle_print(struct dlm_ctxt *dlm, struct debug_buffer *db) mle = hlist_entry(list, struct dlm_master_list_entry, master_hash_node); ++total; - ++bktcnt; + ++bucket_count; if (db->len - out < 200) continue; out += dump_mle(mle, db->buf + out, db->len - out); } - longest = max(longest, bktcnt); - bktcnt = 0; + longest = max(longest, bucket_count); + bucket_count = 0; } spin_unlock(&dlm->master_lock); @@ -782,7 +782,9 @@ static int debug_state_print(struct dlm_ctxt *dlm, struct debug_buffer *db) /* Domain: xxxxxxxxxx Key: 0xdfbac769 */ out += snprintf(db->buf + out, db->len - out, - "Domain: %s Key: 0x%08x\n", dlm->name, dlm->key); + "Domain: %s Key: 0x%08x Protocol: %d.%d\n", + dlm->name, dlm->key, dlm->dlm_locking_proto.pv_major, + dlm->dlm_locking_proto.pv_minor); /* Thread Pid: xxx Node: xxx State: xxxxx */ out += snprintf(db->buf + out, db->len - out, diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c index 11a5c87fd7f7..58a93b953735 100644 --- a/fs/ocfs2/dlm/dlmdomain.c +++ b/fs/ocfs2/dlm/dlmdomain.c @@ -128,10 +128,14 @@ static DECLARE_WAIT_QUEUE_HEAD(dlm_domain_events); * will have a negotiated version with the same major number and a minor * number equal or smaller. The dlm_ctxt->dlm_locking_proto field should * be used to determine what a running domain is actually using. + * + * New in version 1.1: + * - Message DLM_QUERY_REGION added to support global heartbeat + * - Message DLM_QUERY_NODEINFO added to allow online node removes */ static const struct dlm_protocol_version dlm_protocol = { .pv_major = 1, - .pv_minor = 0, + .pv_minor = 1, }; #define DLM_DOMAIN_BACKOFF_MS 200 @@ -142,6 +146,8 @@ static int dlm_assert_joined_handler(struct o2net_msg *msg, u32 len, void *data, void **ret_data); static int dlm_cancel_join_handler(struct o2net_msg *msg, u32 len, void *data, void **ret_data); +static int dlm_query_region_handler(struct o2net_msg *msg, u32 len, + void *data, void **ret_data); static int dlm_exit_domain_handler(struct o2net_msg *msg, u32 len, void *data, void **ret_data); static int dlm_protocol_compare(struct dlm_protocol_version *existing, @@ -921,6 +927,370 @@ static int dlm_assert_joined_handler(struct o2net_msg *msg, u32 len, void *data, return 0; } +static int dlm_match_regions(struct dlm_ctxt *dlm, + struct dlm_query_region *qr) +{ + char *local = NULL, *remote = qr->qr_regions; + char *l, *r; + int localnr, i, j, foundit; + int status = 0; + + if (!o2hb_global_heartbeat_active()) { + if (qr->qr_numregions) { + mlog(ML_ERROR, "Domain %s: Joining node %d has global " + "heartbeat enabled but local node %d does not\n", + qr->qr_domain, qr->qr_node, dlm->node_num); + status = -EINVAL; + } + goto bail; + } + + if (o2hb_global_heartbeat_active() && !qr->qr_numregions) { + mlog(ML_ERROR, "Domain %s: Local node %d has global " + "heartbeat enabled but joining node %d does not\n", + qr->qr_domain, dlm->node_num, qr->qr_node); + status = -EINVAL; + goto bail; + } + + r = remote; + for (i = 0; i < qr->qr_numregions; ++i) { + mlog(0, "Region %.*s\n", O2HB_MAX_REGION_NAME_LEN, r); + r += O2HB_MAX_REGION_NAME_LEN; + } + + local = kmalloc(sizeof(qr->qr_regions), GFP_KERNEL); + if (!local) { + status = -ENOMEM; + goto bail; + } + + localnr = o2hb_get_all_regions(local, O2NM_MAX_REGIONS); + + /* compare local regions with remote */ + l = local; + for (i = 0; i < localnr; ++i) { + foundit = 0; + r = remote; + for (j = 0; j <= qr->qr_numregions; ++j) { + if (!memcmp(l, r, O2HB_MAX_REGION_NAME_LEN)) { + foundit = 1; + break; + } + r += O2HB_MAX_REGION_NAME_LEN; + } + if (!foundit) { + status = -EINVAL; + mlog(ML_ERROR, "Domain %s: Region '%.*s' registered " + "in local node %d but not in joining node %d\n", + qr->qr_domain, O2HB_MAX_REGION_NAME_LEN, l, + dlm->node_num, qr->qr_node); + goto bail; + } + l += O2HB_MAX_REGION_NAME_LEN; + } + + /* compare remote with local regions */ + r = remote; + for (i = 0; i < qr->qr_numregions; ++i) { + foundit = 0; + l = local; + for (j = 0; j < localnr; ++j) { + if (!memcmp(r, l, O2HB_MAX_REGION_NAME_LEN)) { + foundit = 1; + break; + } + l += O2HB_MAX_REGION_NAME_LEN; + } + if (!foundit) { + status = -EINVAL; + mlog(ML_ERROR, "Domain %s: Region '%.*s' registered " + "in joining node %d but not in local node %d\n", + qr->qr_domain, O2HB_MAX_REGION_NAME_LEN, r, + qr->qr_node, dlm->node_num); + goto bail; + } + r += O2HB_MAX_REGION_NAME_LEN; + } + +bail: + kfree(local); + + return status; +} + +static int dlm_send_regions(struct dlm_ctxt *dlm, unsigned long *node_map) +{ + struct dlm_query_region *qr = NULL; + int status, ret = 0, i; + char *p; + + if (find_next_bit(node_map, O2NM_MAX_NODES, 0) >= O2NM_MAX_NODES) + goto bail; + + qr = kzalloc(sizeof(struct dlm_query_region), GFP_KERNEL); + if (!qr) { + ret = -ENOMEM; + mlog_errno(ret); + goto bail; + } + + qr->qr_node = dlm->node_num; + qr->qr_namelen = strlen(dlm->name); + memcpy(qr->qr_domain, dlm->name, qr->qr_namelen); + /* if local hb, the numregions will be zero */ + if (o2hb_global_heartbeat_active()) + qr->qr_numregions = o2hb_get_all_regions(qr->qr_regions, + O2NM_MAX_REGIONS); + + p = qr->qr_regions; + for (i = 0; i < qr->qr_numregions; ++i, p += O2HB_MAX_REGION_NAME_LEN) + mlog(0, "Region %.*s\n", O2HB_MAX_REGION_NAME_LEN, p); + + i = -1; + while ((i = find_next_bit(node_map, O2NM_MAX_NODES, + i + 1)) < O2NM_MAX_NODES) { + if (i == dlm->node_num) + continue; + + mlog(0, "Sending regions to node %d\n", i); + + ret = o2net_send_message(DLM_QUERY_REGION, DLM_MOD_KEY, qr, + sizeof(struct dlm_query_region), + i, &status); + if (ret >= 0) + ret = status; + if (ret) { + mlog(ML_ERROR, "Region mismatch %d, node %d\n", + ret, i); + break; + } + } + +bail: + kfree(qr); + return ret; +} + +static int dlm_query_region_handler(struct o2net_msg *msg, u32 len, + void *data, void **ret_data) +{ + struct dlm_query_region *qr; + struct dlm_ctxt *dlm = NULL; + int status = 0; + int locked = 0; + + qr = (struct dlm_query_region *) msg->buf; + + mlog(0, "Node %u queries hb regions on domain %s\n", qr->qr_node, + qr->qr_domain); + + status = -EINVAL; + + spin_lock(&dlm_domain_lock); + dlm = __dlm_lookup_domain_full(qr->qr_domain, qr->qr_namelen); + if (!dlm) { + mlog(ML_ERROR, "Node %d queried hb regions on domain %s " + "before join domain\n", qr->qr_node, qr->qr_domain); + goto bail; + } + + spin_lock(&dlm->spinlock); + locked = 1; + if (dlm->joining_node != qr->qr_node) { + mlog(ML_ERROR, "Node %d queried hb regions on domain %s " + "but joining node is %d\n", qr->qr_node, qr->qr_domain, + dlm->joining_node); + goto bail; + } + + /* Support for global heartbeat was added in 1.1 */ + if (dlm->dlm_locking_proto.pv_major == 1 && + dlm->dlm_locking_proto.pv_minor == 0) { + mlog(ML_ERROR, "Node %d queried hb regions on domain %s " + "but active dlm protocol is %d.%d\n", qr->qr_node, + qr->qr_domain, dlm->dlm_locking_proto.pv_major, + dlm->dlm_locking_proto.pv_minor); + goto bail; + } + + status = dlm_match_regions(dlm, qr); + +bail: + if (locked) + spin_unlock(&dlm->spinlock); + spin_unlock(&dlm_domain_lock); + + return status; +} + +static int dlm_match_nodes(struct dlm_ctxt *dlm, struct dlm_query_nodeinfo *qn) +{ + struct o2nm_node *local; + struct dlm_node_info *remote; + int i, j; + int status = 0; + + for (j = 0; j < qn->qn_numnodes; ++j) + mlog(0, "Node %3d, %pI4:%u\n", qn->qn_nodes[j].ni_nodenum, + &(qn->qn_nodes[j].ni_ipv4_address), + ntohs(qn->qn_nodes[j].ni_ipv4_port)); + + for (i = 0; i < O2NM_MAX_NODES && !status; ++i) { + local = o2nm_get_node_by_num(i); + remote = NULL; + for (j = 0; j < qn->qn_numnodes; ++j) { + if (qn->qn_nodes[j].ni_nodenum == i) { + remote = &(qn->qn_nodes[j]); + break; + } + } + + if (!local && !remote) + continue; + + if ((local && !remote) || (!local && remote)) + status = -EINVAL; + + if (!status && + ((remote->ni_nodenum != local->nd_num) || + (remote->ni_ipv4_port != local->nd_ipv4_port) || + (remote->ni_ipv4_address != local->nd_ipv4_address))) + status = -EINVAL; + + if (status) { + if (remote && !local) + mlog(ML_ERROR, "Domain %s: Node %d (%pI4:%u) " + "registered in joining node %d but not in " + "local node %d\n", qn->qn_domain, + remote->ni_nodenum, + &(remote->ni_ipv4_address), + ntohs(remote->ni_ipv4_port), + qn->qn_nodenum, dlm->node_num); + if (local && !remote) + mlog(ML_ERROR, "Domain %s: Node %d (%pI4:%u) " + "registered in local node %d but not in " + "joining node %d\n", qn->qn_domain, + local->nd_num, &(local->nd_ipv4_address), + ntohs(local->nd_ipv4_port), + dlm->node_num, qn->qn_nodenum); + BUG_ON((!local && !remote)); + } + + if (local) + o2nm_node_put(local); + } + + return status; +} + +static int dlm_send_nodeinfo(struct dlm_ctxt *dlm, unsigned long *node_map) +{ + struct dlm_query_nodeinfo *qn = NULL; + struct o2nm_node *node; + int ret = 0, status, count, i; + + if (find_next_bit(node_map, O2NM_MAX_NODES, 0) >= O2NM_MAX_NODES) + goto bail; + + qn = kzalloc(sizeof(struct dlm_query_nodeinfo), GFP_KERNEL); + if (!qn) { + ret = -ENOMEM; + mlog_errno(ret); + goto bail; + } + + for (i = 0, count = 0; i < O2NM_MAX_NODES; ++i) { + node = o2nm_get_node_by_num(i); + if (!node) + continue; + qn->qn_nodes[count].ni_nodenum = node->nd_num; + qn->qn_nodes[count].ni_ipv4_port = node->nd_ipv4_port; + qn->qn_nodes[count].ni_ipv4_address = node->nd_ipv4_address; + mlog(0, "Node %3d, %pI4:%u\n", node->nd_num, + &(node->nd_ipv4_address), ntohs(node->nd_ipv4_port)); + ++count; + o2nm_node_put(node); + } + + qn->qn_nodenum = dlm->node_num; + qn->qn_numnodes = count; + qn->qn_namelen = strlen(dlm->name); + memcpy(qn->qn_domain, dlm->name, qn->qn_namelen); + + i = -1; + while ((i = find_next_bit(node_map, O2NM_MAX_NODES, + i + 1)) < O2NM_MAX_NODES) { + if (i == dlm->node_num) + continue; + + mlog(0, "Sending nodeinfo to node %d\n", i); + + ret = o2net_send_message(DLM_QUERY_NODEINFO, DLM_MOD_KEY, + qn, sizeof(struct dlm_query_nodeinfo), + i, &status); + if (ret >= 0) + ret = status; + if (ret) { + mlog(ML_ERROR, "node mismatch %d, node %d\n", ret, i); + break; + } + } + +bail: + kfree(qn); + return ret; +} + +static int dlm_query_nodeinfo_handler(struct o2net_msg *msg, u32 len, + void *data, void **ret_data) +{ + struct dlm_query_nodeinfo *qn; + struct dlm_ctxt *dlm = NULL; + int locked = 0, status = -EINVAL; + + qn = (struct dlm_query_nodeinfo *) msg->buf; + + mlog(0, "Node %u queries nodes on domain %s\n", qn->qn_nodenum, + qn->qn_domain); + + spin_lock(&dlm_domain_lock); + dlm = __dlm_lookup_domain_full(qn->qn_domain, qn->qn_namelen); + if (!dlm) { + mlog(ML_ERROR, "Node %d queried nodes on domain %s before " + "join domain\n", qn->qn_nodenum, qn->qn_domain); + goto bail; + } + + spin_lock(&dlm->spinlock); + locked = 1; + if (dlm->joining_node != qn->qn_nodenum) { + mlog(ML_ERROR, "Node %d queried nodes on domain %s but " + "joining node is %d\n", qn->qn_nodenum, qn->qn_domain, + dlm->joining_node); + goto bail; + } + + /* Support for node query was added in 1.1 */ + if (dlm->dlm_locking_proto.pv_major == 1 && + dlm->dlm_locking_proto.pv_minor == 0) { + mlog(ML_ERROR, "Node %d queried nodes on domain %s " + "but active dlm protocol is %d.%d\n", qn->qn_nodenum, + qn->qn_domain, dlm->dlm_locking_proto.pv_major, + dlm->dlm_locking_proto.pv_minor); + goto bail; + } + + status = dlm_match_nodes(dlm, qn); + +bail: + if (locked) + spin_unlock(&dlm->spinlock); + spin_unlock(&dlm_domain_lock); + + return status; +} + static int dlm_cancel_join_handler(struct o2net_msg *msg, u32 len, void *data, void **ret_data) { @@ -1241,6 +1611,20 @@ static int dlm_try_to_join_domain(struct dlm_ctxt *dlm) set_bit(dlm->node_num, dlm->domain_map); spin_unlock(&dlm->spinlock); + /* Support for global heartbeat and node info was added in 1.1 */ + if (dlm_protocol.pv_major > 1 || dlm_protocol.pv_minor > 0) { + status = dlm_send_nodeinfo(dlm, ctxt->yes_resp_map); + if (status) { + mlog_errno(status); + goto bail; + } + status = dlm_send_regions(dlm, ctxt->yes_resp_map); + if (status) { + mlog_errno(status); + goto bail; + } + } + dlm_send_join_asserts(dlm, ctxt->yes_resp_map); /* Joined state *must* be set before the joining node @@ -1807,7 +2191,21 @@ static int dlm_register_net_handlers(void) sizeof(struct dlm_cancel_join), dlm_cancel_join_handler, NULL, NULL, &dlm_join_handlers); + if (status) + goto bail; + + status = o2net_register_handler(DLM_QUERY_REGION, DLM_MOD_KEY, + sizeof(struct dlm_query_region), + dlm_query_region_handler, + NULL, NULL, &dlm_join_handlers); + if (status) + goto bail; + + status = o2net_register_handler(DLM_QUERY_NODEINFO, DLM_MOD_KEY, + sizeof(struct dlm_query_nodeinfo), + dlm_query_nodeinfo_handler, + NULL, NULL, &dlm_join_handlers); bail: if (status < 0) dlm_unregister_net_handlers(); diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 5e02a893f46e..e8d94d722ecb 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -3635,10 +3635,18 @@ static int ocfs2_data_convert_worker(struct ocfs2_lock_res *lockres, { struct inode *inode; struct address_space *mapping; + struct ocfs2_inode_info *oi; inode = ocfs2_lock_res_inode(lockres); mapping = inode->i_mapping; + if (S_ISDIR(inode->i_mode)) { + oi = OCFS2_I(inode); + oi->ip_dir_lock_gen++; + mlog(0, "generation: %u\n", oi->ip_dir_lock_gen); + goto out; + } + if (!S_ISREG(inode->i_mode)) goto out; diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 9a03c151b5ce..9e8cc4346b76 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -64,12 +64,6 @@ #include "buffer_head_io.h" -static int ocfs2_sync_inode(struct inode *inode) -{ - filemap_fdatawrite(inode->i_mapping); - return sync_mapping_buffers(inode->i_mapping); -} - static int ocfs2_init_file_private(struct inode *inode, struct file *file) { struct ocfs2_file_private *fp; @@ -180,16 +174,12 @@ static int ocfs2_sync_file(struct file *file, int datasync) { int err = 0; journal_t *journal; - struct dentry *dentry = file->f_path.dentry; struct inode *inode = file->f_mapping->host; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); - mlog_entry("(0x%p, 0x%p, %d, '%.*s')\n", file, dentry, datasync, - dentry->d_name.len, dentry->d_name.name); - - err = ocfs2_sync_inode(dentry->d_inode); - if (err) - goto bail; + mlog_entry("(0x%p, %d, 0x%p, '%.*s')\n", file, datasync, + file->f_path.dentry, file->f_path.dentry->d_name.len, + file->f_path.dentry->d_name.name); if (datasync && !(inode->i_state & I_DIRTY_DATASYNC)) { /* @@ -370,7 +360,7 @@ static int ocfs2_cow_file_pos(struct inode *inode, if (!(ext_flags & OCFS2_EXT_REFCOUNTED)) goto out; - return ocfs2_refcount_cow(inode, fe_bh, cpos, 1, cpos+1); + return ocfs2_refcount_cow(inode, NULL, fe_bh, cpos, 1, cpos+1); out: return status; @@ -913,8 +903,8 @@ static int ocfs2_zero_extend_get_range(struct inode *inode, zero_clusters = last_cpos - zero_cpos; if (needs_cow) { - rc = ocfs2_refcount_cow(inode, di_bh, zero_cpos, zero_clusters, - UINT_MAX); + rc = ocfs2_refcount_cow(inode, NULL, di_bh, zero_cpos, + zero_clusters, UINT_MAX); if (rc) { mlog_errno(rc); goto out; @@ -2062,6 +2052,7 @@ out: } static int ocfs2_prepare_inode_for_refcount(struct inode *inode, + struct file *file, loff_t pos, size_t count, int *meta_level) { @@ -2079,7 +2070,7 @@ static int ocfs2_prepare_inode_for_refcount(struct inode *inode, *meta_level = 1; - ret = ocfs2_refcount_cow(inode, di_bh, cpos, clusters, UINT_MAX); + ret = ocfs2_refcount_cow(inode, file, di_bh, cpos, clusters, UINT_MAX); if (ret) mlog_errno(ret); out: @@ -2087,7 +2078,7 @@ out: return ret; } -static int ocfs2_prepare_inode_for_write(struct dentry *dentry, +static int ocfs2_prepare_inode_for_write(struct file *file, loff_t *ppos, size_t count, int appending, @@ -2095,6 +2086,7 @@ static int ocfs2_prepare_inode_for_write(struct dentry *dentry, int *has_refcount) { int ret = 0, meta_level = 0; + struct dentry *dentry = file->f_path.dentry; struct inode *inode = dentry->d_inode; loff_t saved_pos, end; @@ -2150,6 +2142,7 @@ static int ocfs2_prepare_inode_for_write(struct dentry *dentry, meta_level = -1; ret = ocfs2_prepare_inode_for_refcount(inode, + file, saved_pos, count, &meta_level); @@ -2232,6 +2225,8 @@ static ssize_t ocfs2_file_aio_write(struct kiocb *iocb, struct file *file = iocb->ki_filp; struct inode *inode = file->f_path.dentry->d_inode; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + int full_coherency = !(osb->s_mount_opt & + OCFS2_MOUNT_COHERENCY_BUFFERED); mlog_entry("(0x%p, %u, '%.*s')\n", file, (unsigned int)nr_segs, @@ -2255,16 +2250,39 @@ relock: have_alloc_sem = 1; } - /* concurrent O_DIRECT writes are allowed */ - rw_level = !direct_io; + /* + * Concurrent O_DIRECT writes are allowed with + * mount_option "coherency=buffered". + */ + rw_level = (!direct_io || full_coherency); + ret = ocfs2_rw_lock(inode, rw_level); if (ret < 0) { mlog_errno(ret); goto out_sems; } + /* + * O_DIRECT writes with "coherency=full" need to take EX cluster + * inode_lock to guarantee coherency. + */ + if (direct_io && full_coherency) { + /* + * We need to take and drop the inode lock to force + * other nodes to drop their caches. Buffered I/O + * already does this in write_begin(). + */ + ret = ocfs2_inode_lock(inode, NULL, 1); + if (ret < 0) { + mlog_errno(ret); + goto out_sems; + } + + ocfs2_inode_unlock(inode, 1); + } + can_do_direct = direct_io; - ret = ocfs2_prepare_inode_for_write(file->f_path.dentry, ppos, + ret = ocfs2_prepare_inode_for_write(file, ppos, iocb->ki_left, appending, &can_do_direct, &has_refcount); if (ret < 0) { @@ -2312,17 +2330,6 @@ relock: written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos, ppos, count, ocount); if (written < 0) { - /* - * direct write may have instantiated a few - * blocks outside i_size. Trim these off again. - * Don't need i_size_read because we hold i_mutex. - * - * XXX(truncate): this looks buggy because ocfs2 did not - * actually implement ->truncate. Take a look at - * the new truncate sequence and update this accordingly - */ - if (*ppos + count > inode->i_size) - truncate_setsize(inode, inode->i_size); ret = written; goto out_dio; } @@ -2394,7 +2401,7 @@ static int ocfs2_splice_to_file(struct pipe_inode_info *pipe, { int ret; - ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos, + ret = ocfs2_prepare_inode_for_write(out, &sd->pos, sd->total_len, 0, NULL, NULL); if (ret < 0) { mlog_errno(ret); diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index eece3e05d9d0..f935fd6600dd 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -335,6 +335,7 @@ void ocfs2_populate_inode(struct inode *inode, struct ocfs2_dinode *fe, else inode->i_fop = &ocfs2_dops_no_plocks; i_size_write(inode, le64_to_cpu(fe->i_size)); + OCFS2_I(inode)->ip_dir_lock_gen = 1; break; case S_IFLNK: if (ocfs2_inode_is_fast_symlink(inode)) diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h index 6de5a869db30..1c508b149b3a 100644 --- a/fs/ocfs2/inode.h +++ b/fs/ocfs2/inode.h @@ -46,30 +46,28 @@ struct ocfs2_inode_info /* These fields are protected by ip_lock */ spinlock_t ip_lock; u32 ip_open_count; - u32 ip_clusters; struct list_head ip_io_markers; + u32 ip_clusters; + u16 ip_dyn_features; struct mutex ip_io_mutex; - u32 ip_flags; /* see below */ u32 ip_attr; /* inode attributes */ - u16 ip_dyn_features; /* protected by recovery_lock. */ struct inode *ip_next_orphan; - u32 ip_dir_start_lookup; - struct ocfs2_caching_info ip_metadata_cache; - struct ocfs2_extent_map ip_extent_map; - struct inode vfs_inode; struct jbd2_inode ip_jinode; + u32 ip_dir_start_lookup; + /* Only valid if the inode is the dir. */ u32 ip_last_used_slot; u64 ip_last_used_group; + u32 ip_dir_lock_gen; struct ocfs2_alloc_reservation ip_la_data_resv; }; diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index 7d9d9c132cef..7a4868196152 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -26,6 +26,26 @@ #include <linux/ext2_fs.h> +#define o2info_from_user(a, b) \ + copy_from_user(&(a), (b), sizeof(a)) +#define o2info_to_user(a, b) \ + copy_to_user((typeof(a) __user *)b, &(a), sizeof(a)) + +/* + * This call is void because we are already reporting an error that may + * be -EFAULT. The error will be returned from the ioctl(2) call. It's + * just a best-effort to tell userspace that this request caused the error. + */ +static inline void __o2info_set_request_error(struct ocfs2_info_request *kreq, + struct ocfs2_info_request __user *req) +{ + kreq->ir_flags |= OCFS2_INFO_FL_ERROR; + (void)put_user(kreq->ir_flags, (__u32 __user *)&(req->ir_flags)); +} + +#define o2info_set_request_error(a, b) \ + __o2info_set_request_error((struct ocfs2_info_request *)&(a), b) + static int ocfs2_get_inode_attr(struct inode *inode, unsigned *flags) { int status; @@ -109,6 +129,328 @@ bail: return status; } +int ocfs2_info_handle_blocksize(struct inode *inode, + struct ocfs2_info_request __user *req) +{ + int status = -EFAULT; + struct ocfs2_info_blocksize oib; + + if (o2info_from_user(oib, req)) + goto bail; + + oib.ib_blocksize = inode->i_sb->s_blocksize; + oib.ib_req.ir_flags |= OCFS2_INFO_FL_FILLED; + + if (o2info_to_user(oib, req)) + goto bail; + + status = 0; +bail: + if (status) + o2info_set_request_error(oib, req); + + return status; +} + +int ocfs2_info_handle_clustersize(struct inode *inode, + struct ocfs2_info_request __user *req) +{ + int status = -EFAULT; + struct ocfs2_info_clustersize oic; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + + if (o2info_from_user(oic, req)) + goto bail; + + oic.ic_clustersize = osb->s_clustersize; + oic.ic_req.ir_flags |= OCFS2_INFO_FL_FILLED; + + if (o2info_to_user(oic, req)) + goto bail; + + status = 0; +bail: + if (status) + o2info_set_request_error(oic, req); + + return status; +} + +int ocfs2_info_handle_maxslots(struct inode *inode, + struct ocfs2_info_request __user *req) +{ + int status = -EFAULT; + struct ocfs2_info_maxslots oim; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + + if (o2info_from_user(oim, req)) + goto bail; + + oim.im_max_slots = osb->max_slots; + oim.im_req.ir_flags |= OCFS2_INFO_FL_FILLED; + + if (o2info_to_user(oim, req)) + goto bail; + + status = 0; +bail: + if (status) + o2info_set_request_error(oim, req); + + return status; +} + +int ocfs2_info_handle_label(struct inode *inode, + struct ocfs2_info_request __user *req) +{ + int status = -EFAULT; + struct ocfs2_info_label oil; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + + if (o2info_from_user(oil, req)) + goto bail; + + memcpy(oil.il_label, osb->vol_label, OCFS2_MAX_VOL_LABEL_LEN); + oil.il_req.ir_flags |= OCFS2_INFO_FL_FILLED; + + if (o2info_to_user(oil, req)) + goto bail; + + status = 0; +bail: + if (status) + o2info_set_request_error(oil, req); + + return status; +} + +int ocfs2_info_handle_uuid(struct inode *inode, + struct ocfs2_info_request __user *req) +{ + int status = -EFAULT; + struct ocfs2_info_uuid oiu; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + + if (o2info_from_user(oiu, req)) + goto bail; + + memcpy(oiu.iu_uuid_str, osb->uuid_str, OCFS2_TEXT_UUID_LEN + 1); + oiu.iu_req.ir_flags |= OCFS2_INFO_FL_FILLED; + + if (o2info_to_user(oiu, req)) + goto bail; + + status = 0; +bail: + if (status) + o2info_set_request_error(oiu, req); + + return status; +} + +int ocfs2_info_handle_fs_features(struct inode *inode, + struct ocfs2_info_request __user *req) +{ + int status = -EFAULT; + struct ocfs2_info_fs_features oif; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + + if (o2info_from_user(oif, req)) + goto bail; + + oif.if_compat_features = osb->s_feature_compat; + oif.if_incompat_features = osb->s_feature_incompat; + oif.if_ro_compat_features = osb->s_feature_ro_compat; + oif.if_req.ir_flags |= OCFS2_INFO_FL_FILLED; + + if (o2info_to_user(oif, req)) + goto bail; + + status = 0; +bail: + if (status) + o2info_set_request_error(oif, req); + + return status; +} + +int ocfs2_info_handle_journal_size(struct inode *inode, + struct ocfs2_info_request __user *req) +{ + int status = -EFAULT; + struct ocfs2_info_journal_size oij; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + + if (o2info_from_user(oij, req)) + goto bail; + + oij.ij_journal_size = osb->journal->j_inode->i_size; + + oij.ij_req.ir_flags |= OCFS2_INFO_FL_FILLED; + + if (o2info_to_user(oij, req)) + goto bail; + + status = 0; +bail: + if (status) + o2info_set_request_error(oij, req); + + return status; +} + +int ocfs2_info_handle_unknown(struct inode *inode, + struct ocfs2_info_request __user *req) +{ + int status = -EFAULT; + struct ocfs2_info_request oir; + + if (o2info_from_user(oir, req)) + goto bail; + + oir.ir_flags &= ~OCFS2_INFO_FL_FILLED; + + if (o2info_to_user(oir, req)) + goto bail; + + status = 0; +bail: + if (status) + o2info_set_request_error(oir, req); + + return status; +} + +/* + * Validate and distinguish OCFS2_IOC_INFO requests. + * + * - validate the magic number. + * - distinguish different requests. + * - validate size of different requests. + */ +int ocfs2_info_handle_request(struct inode *inode, + struct ocfs2_info_request __user *req) +{ + int status = -EFAULT; + struct ocfs2_info_request oir; + + if (o2info_from_user(oir, req)) + goto bail; + + status = -EINVAL; + if (oir.ir_magic != OCFS2_INFO_MAGIC) + goto bail; + + switch (oir.ir_code) { + case OCFS2_INFO_BLOCKSIZE: + if (oir.ir_size == sizeof(struct ocfs2_info_blocksize)) + status = ocfs2_info_handle_blocksize(inode, req); + break; + case OCFS2_INFO_CLUSTERSIZE: + if (oir.ir_size == sizeof(struct ocfs2_info_clustersize)) + status = ocfs2_info_handle_clustersize(inode, req); + break; + case OCFS2_INFO_MAXSLOTS: + if (oir.ir_size == sizeof(struct ocfs2_info_maxslots)) + status = ocfs2_info_handle_maxslots(inode, req); + break; + case OCFS2_INFO_LABEL: + if (oir.ir_size == sizeof(struct ocfs2_info_label)) + status = ocfs2_info_handle_label(inode, req); + break; + case OCFS2_INFO_UUID: + if (oir.ir_size == sizeof(struct ocfs2_info_uuid)) + status = ocfs2_info_handle_uuid(inode, req); + break; + case OCFS2_INFO_FS_FEATURES: + if (oir.ir_size == sizeof(struct ocfs2_info_fs_features)) + status = ocfs2_info_handle_fs_features(inode, req); + break; + case OCFS2_INFO_JOURNAL_SIZE: + if (oir.ir_size == sizeof(struct ocfs2_info_journal_size)) + status = ocfs2_info_handle_journal_size(inode, req); + break; + default: + status = ocfs2_info_handle_unknown(inode, req); + break; + } + +bail: + return status; +} + +int ocfs2_get_request_ptr(struct ocfs2_info *info, int idx, + u64 *req_addr, int compat_flag) +{ + int status = -EFAULT; + u64 __user *bp = NULL; + + if (compat_flag) { +#ifdef CONFIG_COMPAT + /* + * pointer bp stores the base address of a pointers array, + * which collects all addresses of separate request. + */ + bp = (u64 __user *)(unsigned long)compat_ptr(info->oi_requests); +#else + BUG(); +#endif + } else + bp = (u64 __user *)(unsigned long)(info->oi_requests); + + if (o2info_from_user(*req_addr, bp + idx)) + goto bail; + + status = 0; +bail: + return status; +} + +/* + * OCFS2_IOC_INFO handles an array of requests passed from userspace. + * + * ocfs2_info_handle() recevies a large info aggregation, grab and + * validate the request count from header, then break it into small + * pieces, later specific handlers can handle them one by one. + * + * Idea here is to make each separate request small enough to ensure + * a better backward&forward compatibility, since a small piece of + * request will be less likely to be broken if disk layout get changed. + */ +int ocfs2_info_handle(struct inode *inode, struct ocfs2_info *info, + int compat_flag) +{ + int i, status = 0; + u64 req_addr; + struct ocfs2_info_request __user *reqp; + + if ((info->oi_count > OCFS2_INFO_MAX_REQUEST) || + (!info->oi_requests)) { + status = -EINVAL; + goto bail; + } + + for (i = 0; i < info->oi_count; i++) { + + status = ocfs2_get_request_ptr(info, i, &req_addr, compat_flag); + if (status) + break; + + reqp = (struct ocfs2_info_request *)(unsigned long)req_addr; + if (!reqp) { + status = -EINVAL; + goto bail; + } + + status = ocfs2_info_handle_request(inode, reqp); + if (status) + break; + } + +bail: + return status; +} + long ocfs2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct inode *inode = filp->f_path.dentry->d_inode; @@ -120,6 +462,7 @@ long ocfs2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) struct reflink_arguments args; const char *old_path, *new_path; bool preserve; + struct ocfs2_info info; switch (cmd) { case OCFS2_IOC_GETFLAGS: @@ -174,6 +517,12 @@ long ocfs2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) preserve = (args.preserve != 0); return ocfs2_reflink_ioctl(inode, old_path, new_path, preserve); + case OCFS2_IOC_INFO: + if (copy_from_user(&info, (struct ocfs2_info __user *)arg, + sizeof(struct ocfs2_info))) + return -EFAULT; + + return ocfs2_info_handle(inode, &info, 0); default: return -ENOTTY; } @@ -185,6 +534,7 @@ long ocfs2_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg) bool preserve; struct reflink_arguments args; struct inode *inode = file->f_path.dentry->d_inode; + struct ocfs2_info info; switch (cmd) { case OCFS2_IOC32_GETFLAGS: @@ -209,6 +559,12 @@ long ocfs2_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg) return ocfs2_reflink_ioctl(inode, compat_ptr(args.old_path), compat_ptr(args.new_path), preserve); + case OCFS2_IOC_INFO: + if (copy_from_user(&info, (struct ocfs2_info __user *)arg, + sizeof(struct ocfs2_info))) + return -EFAULT; + + return ocfs2_info_handle(inode, &info, 1); default: return -ENOIOCTLCMD; } diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 9b57c0350ff9..faa2303dbf0a 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -301,7 +301,6 @@ static int ocfs2_commit_cache(struct ocfs2_super *osb) { int status = 0; unsigned int flushed; - unsigned long old_id; struct ocfs2_journal *journal = NULL; mlog_entry_void(); @@ -326,7 +325,7 @@ static int ocfs2_commit_cache(struct ocfs2_super *osb) goto finally; } - old_id = ocfs2_inc_trans_id(journal); + ocfs2_inc_trans_id(journal); flushed = atomic_read(&journal->j_num_trans); atomic_set(&journal->j_num_trans, 0); @@ -342,9 +341,6 @@ finally: return status; } -/* pass it NULL and it will allocate a new handle object for you. If - * you pass it a handle however, it may still return error, in which - * case it has free'd the passed handle for you. */ handle_t *ocfs2_start_trans(struct ocfs2_super *osb, int max_buffs) { journal_t *journal = osb->journal->j_journal; @@ -1888,6 +1884,8 @@ void ocfs2_queue_orphan_scan(struct ocfs2_super *osb) os = &osb->osb_orphan_scan; + mlog(0, "Begin orphan scan\n"); + if (atomic_read(&os->os_state) == ORPHAN_SCAN_INACTIVE) goto out; @@ -1920,6 +1918,7 @@ void ocfs2_queue_orphan_scan(struct ocfs2_super *osb) unlock: ocfs2_orphan_scan_unlock(osb, seqno); out: + mlog(0, "Orphan scan completed\n"); return; } diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h index b5baaa8e710f..43e56b97f9c0 100644 --- a/fs/ocfs2/journal.h +++ b/fs/ocfs2/journal.h @@ -67,11 +67,12 @@ struct ocfs2_journal { struct buffer_head *j_bh; /* Journal disk inode block */ atomic_t j_num_trans; /* Number of transactions * currently in the system. */ + spinlock_t j_lock; unsigned long j_trans_id; struct rw_semaphore j_trans_barrier; wait_queue_head_t j_checkpointed; - spinlock_t j_lock; + /* both fields protected by j_lock*/ struct list_head j_la_cleanups; struct work_struct j_recovery_work; }; diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c index 4c18f4ad93b4..7e32db9c2c99 100644 --- a/fs/ocfs2/mmap.c +++ b/fs/ocfs2/mmap.c @@ -59,10 +59,11 @@ static int ocfs2_fault(struct vm_area_struct *area, struct vm_fault *vmf) return ret; } -static int __ocfs2_page_mkwrite(struct inode *inode, struct buffer_head *di_bh, +static int __ocfs2_page_mkwrite(struct file *file, struct buffer_head *di_bh, struct page *page) { int ret; + struct inode *inode = file->f_path.dentry->d_inode; struct address_space *mapping = inode->i_mapping; loff_t pos = page_offset(page); unsigned int len = PAGE_CACHE_SIZE; @@ -111,7 +112,7 @@ static int __ocfs2_page_mkwrite(struct inode *inode, struct buffer_head *di_bh, if (page->index == last_index) len = ((size - 1) & ~PAGE_CACHE_MASK) + 1; - ret = ocfs2_write_begin_nolock(mapping, pos, len, 0, &locked_page, + ret = ocfs2_write_begin_nolock(file, mapping, pos, len, 0, &locked_page, &fsdata, di_bh, page); if (ret) { if (ret != -ENOSPC) @@ -159,7 +160,7 @@ static int ocfs2_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) */ down_write(&OCFS2_I(inode)->ip_alloc_sem); - ret = __ocfs2_page_mkwrite(inode, di_bh, page); + ret = __ocfs2_page_mkwrite(vma->vm_file, di_bh, page); up_write(&OCFS2_I(inode)->ip_alloc_sem); diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index a00dda2e4f16..e7bde21149ae 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -171,7 +171,8 @@ bail_add: ret = ERR_PTR(status); goto bail_unlock; } - } + } else + ocfs2_dentry_attach_gen(dentry); bail_unlock: /* Don't drop the cluster lock until *after* the d_add -- diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index c67003b6b5a2..d8408217e3bd 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -150,26 +150,33 @@ typedef void (*ocfs2_lock_callback)(int status, unsigned long data); struct ocfs2_lock_res { void *l_priv; struct ocfs2_lock_res_ops *l_ops; - spinlock_t l_lock; + struct list_head l_blocked_list; struct list_head l_mask_waiters; - enum ocfs2_lock_type l_type; unsigned long l_flags; char l_name[OCFS2_LOCK_ID_MAX_LEN]; - int l_level; unsigned int l_ro_holders; unsigned int l_ex_holders; - struct ocfs2_dlm_lksb l_lksb; + unsigned char l_level; + + /* Data packed - type enum ocfs2_lock_type */ + unsigned char l_type; /* used from AST/BAST funcs. */ - enum ocfs2_ast_action l_action; - enum ocfs2_unlock_action l_unlock_action; - int l_requested; - int l_blocking; + /* Data packed - enum type ocfs2_ast_action */ + unsigned char l_action; + /* Data packed - enum type ocfs2_unlock_action */ + unsigned char l_unlock_action; + unsigned char l_requested; + unsigned char l_blocking; unsigned int l_pending_gen; + spinlock_t l_lock; + + struct ocfs2_dlm_lksb l_lksb; + wait_queue_head_t l_event; struct list_head l_debug_list; @@ -243,7 +250,7 @@ enum ocfs2_local_alloc_state enum ocfs2_mount_options { - OCFS2_MOUNT_HB_LOCAL = 1 << 0, /* Heartbeat started in local mode */ + OCFS2_MOUNT_HB_LOCAL = 1 << 0, /* Local heartbeat */ OCFS2_MOUNT_BARRIER = 1 << 1, /* Use block barriers */ OCFS2_MOUNT_NOINTR = 1 << 2, /* Don't catch signals */ OCFS2_MOUNT_ERRORS_PANIC = 1 << 3, /* Panic on errors */ @@ -256,6 +263,10 @@ enum ocfs2_mount_options control lists */ OCFS2_MOUNT_USRQUOTA = 1 << 10, /* We support user quotas */ OCFS2_MOUNT_GRPQUOTA = 1 << 11, /* We support group quotas */ + OCFS2_MOUNT_COHERENCY_BUFFERED = 1 << 12, /* Allow concurrent O_DIRECT + writes */ + OCFS2_MOUNT_HB_NONE = 1 << 13, /* No heartbeat */ + OCFS2_MOUNT_HB_GLOBAL = 1 << 14, /* Global heartbeat */ }; #define OCFS2_OSB_SOFT_RO 0x0001 @@ -277,7 +288,8 @@ struct ocfs2_super struct super_block *sb; struct inode *root_inode; struct inode *sys_root_inode; - struct inode *system_inodes[NUM_SYSTEM_INODES]; + struct inode *global_system_inodes[NUM_GLOBAL_SYSTEM_INODES]; + struct inode **local_system_inodes; struct ocfs2_slot_info *slot_info; @@ -368,6 +380,8 @@ struct ocfs2_super struct ocfs2_alloc_stats alloc_stats; char dev_str[20]; /* "major,minor" of the device */ + u8 osb_stackflags; + char osb_cluster_stack[OCFS2_STACK_LABEL_LEN + 1]; struct ocfs2_cluster_connection *cconn; struct ocfs2_lock_res osb_super_lockres; @@ -601,10 +615,35 @@ static inline int ocfs2_is_soft_readonly(struct ocfs2_super *osb) return ret; } -static inline int ocfs2_userspace_stack(struct ocfs2_super *osb) +static inline int ocfs2_clusterinfo_valid(struct ocfs2_super *osb) { return (osb->s_feature_incompat & - OCFS2_FEATURE_INCOMPAT_USERSPACE_STACK); + (OCFS2_FEATURE_INCOMPAT_USERSPACE_STACK | + OCFS2_FEATURE_INCOMPAT_CLUSTERINFO)); +} + +static inline int ocfs2_userspace_stack(struct ocfs2_super *osb) +{ + if (ocfs2_clusterinfo_valid(osb) && + memcmp(osb->osb_cluster_stack, OCFS2_CLASSIC_CLUSTER_STACK, + OCFS2_STACK_LABEL_LEN)) + return 1; + return 0; +} + +static inline int ocfs2_o2cb_stack(struct ocfs2_super *osb) +{ + if (ocfs2_clusterinfo_valid(osb) && + !memcmp(osb->osb_cluster_stack, OCFS2_CLASSIC_CLUSTER_STACK, + OCFS2_STACK_LABEL_LEN)) + return 1; + return 0; +} + +static inline int ocfs2_cluster_o2cb_global_heartbeat(struct ocfs2_super *osb) +{ + return ocfs2_o2cb_stack(osb) && + (osb->osb_stackflags & OCFS2_CLUSTER_O2CB_GLOBAL_HEARTBEAT); } static inline int ocfs2_mount_local(struct ocfs2_super *osb) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index fa31d05e41b7..c2e4f8222e2f 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -101,7 +101,8 @@ | OCFS2_FEATURE_INCOMPAT_META_ECC \ | OCFS2_FEATURE_INCOMPAT_INDEXED_DIRS \ | OCFS2_FEATURE_INCOMPAT_REFCOUNT_TREE \ - | OCFS2_FEATURE_INCOMPAT_DISCONTIG_BG) + | OCFS2_FEATURE_INCOMPAT_DISCONTIG_BG \ + | OCFS2_FEATURE_INCOMPAT_CLUSTERINFO) #define OCFS2_FEATURE_RO_COMPAT_SUPP (OCFS2_FEATURE_RO_COMPAT_UNWRITTEN \ | OCFS2_FEATURE_RO_COMPAT_USRQUOTA \ | OCFS2_FEATURE_RO_COMPAT_GRPQUOTA) @@ -170,6 +171,13 @@ #define OCFS2_FEATURE_INCOMPAT_DISCONTIG_BG 0x2000 /* + * Incompat bit to indicate useable clusterinfo with stackflags for all + * cluster stacks (userspace adnd o2cb). If this bit is set, + * INCOMPAT_USERSPACE_STACK becomes superfluous and thus should not be set. + */ +#define OCFS2_FEATURE_INCOMPAT_CLUSTERINFO 0x4000 + +/* * backup superblock flag is used to indicate that this volume * has backup superblocks. */ @@ -292,10 +300,13 @@ #define OCFS2_VOL_UUID_LEN 16 #define OCFS2_MAX_VOL_LABEL_LEN 64 -/* The alternate, userspace stack fields */ +/* The cluster stack fields */ #define OCFS2_STACK_LABEL_LEN 4 #define OCFS2_CLUSTER_NAME_LEN 16 +/* Classic (historically speaking) cluster stack */ +#define OCFS2_CLASSIC_CLUSTER_STACK "o2cb" + /* Journal limits (in bytes) */ #define OCFS2_MIN_JOURNAL_SIZE (4 * 1024 * 1024) @@ -305,6 +316,11 @@ */ #define OCFS2_MIN_XATTR_INLINE_SIZE 256 +/* + * Cluster info flags (ocfs2_cluster_info.ci_stackflags) + */ +#define OCFS2_CLUSTER_O2CB_GLOBAL_HEARTBEAT (0x01) + struct ocfs2_system_inode_info { char *si_name; int si_iflags; @@ -322,6 +338,7 @@ enum { USER_QUOTA_SYSTEM_INODE, GROUP_QUOTA_SYSTEM_INODE, #define OCFS2_LAST_GLOBAL_SYSTEM_INODE GROUP_QUOTA_SYSTEM_INODE +#define OCFS2_FIRST_LOCAL_SYSTEM_INODE ORPHAN_DIR_SYSTEM_INODE ORPHAN_DIR_SYSTEM_INODE, EXTENT_ALLOC_SYSTEM_INODE, INODE_ALLOC_SYSTEM_INODE, @@ -330,8 +347,12 @@ enum { TRUNCATE_LOG_SYSTEM_INODE, LOCAL_USER_QUOTA_SYSTEM_INODE, LOCAL_GROUP_QUOTA_SYSTEM_INODE, +#define OCFS2_LAST_LOCAL_SYSTEM_INODE LOCAL_GROUP_QUOTA_SYSTEM_INODE NUM_SYSTEM_INODES }; +#define NUM_GLOBAL_SYSTEM_INODES OCFS2_LAST_GLOBAL_SYSTEM_INODE +#define NUM_LOCAL_SYSTEM_INODES \ + (NUM_SYSTEM_INODES - OCFS2_FIRST_LOCAL_SYSTEM_INODE) static struct ocfs2_system_inode_info ocfs2_system_inodes[NUM_SYSTEM_INODES] = { /* Global system inodes (single copy) */ @@ -360,6 +381,7 @@ static struct ocfs2_system_inode_info ocfs2_system_inodes[NUM_SYSTEM_INODES] = { /* Parameter passed from mount.ocfs2 to module */ #define OCFS2_HB_NONE "heartbeat=none" #define OCFS2_HB_LOCAL "heartbeat=local" +#define OCFS2_HB_GLOBAL "heartbeat=global" /* * OCFS2 directory file types. Only the low 3 bits are used. The @@ -566,9 +588,21 @@ struct ocfs2_slot_map_extended { */ }; +/* + * ci_stackflags is only valid if the incompat bit + * OCFS2_FEATURE_INCOMPAT_CLUSTERINFO is set. + */ struct ocfs2_cluster_info { /*00*/ __u8 ci_stack[OCFS2_STACK_LABEL_LEN]; - __le32 ci_reserved; + union { + __le32 ci_reserved; + struct { + __u8 ci_stackflags; + __u8 ci_reserved1; + __u8 ci_reserved2; + __u8 ci_reserved3; + }; + }; /*08*/ __u8 ci_cluster[OCFS2_CLUSTER_NAME_LEN]; /*18*/ }; @@ -605,9 +639,9 @@ struct ocfs2_super_block { * group header */ /*50*/ __u8 s_label[OCFS2_MAX_VOL_LABEL_LEN]; /* Label for mounting, etc. */ /*90*/ __u8 s_uuid[OCFS2_VOL_UUID_LEN]; /* 128-bit uuid */ -/*A0*/ struct ocfs2_cluster_info s_cluster_info; /* Selected userspace - stack. Only valid - with INCOMPAT flag. */ +/*A0*/ struct ocfs2_cluster_info s_cluster_info; /* Only valid if either + userspace or clusterinfo + INCOMPAT flag set. */ /*B8*/ __le16 s_xattr_inline_size; /* extended attribute inline size for this fs*/ __le16 s_reserved0; diff --git a/fs/ocfs2/ocfs2_ioctl.h b/fs/ocfs2/ocfs2_ioctl.h index 5d241505690b..b46f39bf7438 100644 --- a/fs/ocfs2/ocfs2_ioctl.h +++ b/fs/ocfs2/ocfs2_ioctl.h @@ -76,4 +76,99 @@ struct reflink_arguments { }; #define OCFS2_IOC_REFLINK _IOW('o', 4, struct reflink_arguments) +/* Following definitions dedicated for ocfs2_info_request ioctls. */ +#define OCFS2_INFO_MAX_REQUEST (50) +#define OCFS2_TEXT_UUID_LEN (OCFS2_VOL_UUID_LEN * 2) + +/* Magic number of all requests */ +#define OCFS2_INFO_MAGIC (0x4F32494E) + +/* + * Always try to separate info request into small pieces to + * guarantee the backward&forward compatibility. + */ +struct ocfs2_info { + __u64 oi_requests; /* Array of __u64 pointers to requests */ + __u32 oi_count; /* Number of requests in info_requests */ + __u32 oi_pad; +}; + +struct ocfs2_info_request { +/*00*/ __u32 ir_magic; /* Magic number */ + __u32 ir_code; /* Info request code */ + __u32 ir_size; /* Size of request */ + __u32 ir_flags; /* Request flags */ +/*10*/ /* Request specific fields */ +}; + +struct ocfs2_info_clustersize { + struct ocfs2_info_request ic_req; + __u32 ic_clustersize; + __u32 ic_pad; +}; + +struct ocfs2_info_blocksize { + struct ocfs2_info_request ib_req; + __u32 ib_blocksize; + __u32 ib_pad; +}; + +struct ocfs2_info_maxslots { + struct ocfs2_info_request im_req; + __u32 im_max_slots; + __u32 im_pad; +}; + +struct ocfs2_info_label { + struct ocfs2_info_request il_req; + __u8 il_label[OCFS2_MAX_VOL_LABEL_LEN]; +} __attribute__ ((packed)); + +struct ocfs2_info_uuid { + struct ocfs2_info_request iu_req; + __u8 iu_uuid_str[OCFS2_TEXT_UUID_LEN + 1]; +} __attribute__ ((packed)); + +struct ocfs2_info_fs_features { + struct ocfs2_info_request if_req; + __u32 if_compat_features; + __u32 if_incompat_features; + __u32 if_ro_compat_features; + __u32 if_pad; +}; + +struct ocfs2_info_journal_size { + struct ocfs2_info_request ij_req; + __u64 ij_journal_size; +}; + +/* Codes for ocfs2_info_request */ +enum ocfs2_info_type { + OCFS2_INFO_CLUSTERSIZE = 1, + OCFS2_INFO_BLOCKSIZE, + OCFS2_INFO_MAXSLOTS, + OCFS2_INFO_LABEL, + OCFS2_INFO_UUID, + OCFS2_INFO_FS_FEATURES, + OCFS2_INFO_JOURNAL_SIZE, + OCFS2_INFO_NUM_TYPES +}; + +/* Flags for struct ocfs2_info_request */ +/* Filled by the caller */ +#define OCFS2_INFO_FL_NON_COHERENT (0x00000001) /* Cluster coherency not + required. This is a hint. + It is up to ocfs2 whether + the request can be fulfilled + without locking. */ +/* Filled by ocfs2 */ +#define OCFS2_INFO_FL_FILLED (0x40000000) /* Filesystem understood + this request and + filled in the answer */ + +#define OCFS2_INFO_FL_ERROR (0x80000000) /* Error happened during + request handling. */ + +#define OCFS2_IOC_INFO _IOR('o', 5, struct ocfs2_info) + #endif /* OCFS2_IOCTL_H */ diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index efdd75607406..b5f9160e93e9 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -49,6 +49,7 @@ struct ocfs2_cow_context { struct inode *inode; + struct file *file; u32 cow_start; u32 cow_len; struct ocfs2_extent_tree data_et; @@ -2932,13 +2933,16 @@ static int ocfs2_duplicate_clusters_by_page(handle_t *handle, u64 new_block = ocfs2_clusters_to_blocks(sb, new_cluster); struct page *page; pgoff_t page_index; - unsigned int from, to; + unsigned int from, to, readahead_pages; loff_t offset, end, map_end; struct address_space *mapping = context->inode->i_mapping; mlog(0, "old_cluster %u, new %u, len %u at offset %u\n", old_cluster, new_cluster, new_len, cpos); + readahead_pages = + (ocfs2_cow_contig_clusters(sb) << + OCFS2_SB(sb)->s_clustersize_bits) >> PAGE_CACHE_SHIFT; offset = ((loff_t)cpos) << OCFS2_SB(sb)->s_clustersize_bits; end = offset + (new_len << OCFS2_SB(sb)->s_clustersize_bits); /* @@ -2969,6 +2973,14 @@ static int ocfs2_duplicate_clusters_by_page(handle_t *handle, if (PAGE_CACHE_SIZE <= OCFS2_SB(sb)->s_clustersize) BUG_ON(PageDirty(page)); + if (PageReadahead(page) && context->file) { + page_cache_async_readahead(mapping, + &context->file->f_ra, + context->file, + page, page_index, + readahead_pages); + } + if (!PageUptodate(page)) { ret = block_read_full_page(page, ocfs2_get_block); if (ret) { @@ -3409,12 +3421,35 @@ static int ocfs2_replace_cow(struct ocfs2_cow_context *context) return ret; } +static void ocfs2_readahead_for_cow(struct inode *inode, + struct file *file, + u32 start, u32 len) +{ + struct address_space *mapping; + pgoff_t index; + unsigned long num_pages; + int cs_bits = OCFS2_SB(inode->i_sb)->s_clustersize_bits; + + if (!file) + return; + + mapping = file->f_mapping; + num_pages = (len << cs_bits) >> PAGE_CACHE_SHIFT; + if (!num_pages) + num_pages = 1; + + index = ((loff_t)start << cs_bits) >> PAGE_CACHE_SHIFT; + page_cache_sync_readahead(mapping, &file->f_ra, file, + index, num_pages); +} + /* * Starting at cpos, try to CoW write_len clusters. Don't CoW * past max_cpos. This will stop when it runs into a hole or an * unrefcounted extent. */ static int ocfs2_refcount_cow_hunk(struct inode *inode, + struct file *file, struct buffer_head *di_bh, u32 cpos, u32 write_len, u32 max_cpos) { @@ -3443,6 +3478,8 @@ static int ocfs2_refcount_cow_hunk(struct inode *inode, BUG_ON(cow_len == 0); + ocfs2_readahead_for_cow(inode, file, cow_start, cow_len); + context = kzalloc(sizeof(struct ocfs2_cow_context), GFP_NOFS); if (!context) { ret = -ENOMEM; @@ -3464,6 +3501,7 @@ static int ocfs2_refcount_cow_hunk(struct inode *inode, context->ref_root_bh = ref_root_bh; context->cow_duplicate_clusters = ocfs2_duplicate_clusters_by_page; context->get_clusters = ocfs2_di_get_clusters; + context->file = file; ocfs2_init_dinode_extent_tree(&context->data_et, INODE_CACHE(inode), di_bh); @@ -3492,6 +3530,7 @@ out: * clusters between cpos and cpos+write_len are safe to modify. */ int ocfs2_refcount_cow(struct inode *inode, + struct file *file, struct buffer_head *di_bh, u32 cpos, u32 write_len, u32 max_cpos) { @@ -3511,7 +3550,7 @@ int ocfs2_refcount_cow(struct inode *inode, num_clusters = write_len; if (ext_flags & OCFS2_EXT_REFCOUNTED) { - ret = ocfs2_refcount_cow_hunk(inode, di_bh, cpos, + ret = ocfs2_refcount_cow_hunk(inode, file, di_bh, cpos, num_clusters, max_cpos); if (ret) { mlog_errno(ret); diff --git a/fs/ocfs2/refcounttree.h b/fs/ocfs2/refcounttree.h index 9983ba1570e2..c8ce46f7d8e3 100644 --- a/fs/ocfs2/refcounttree.h +++ b/fs/ocfs2/refcounttree.h @@ -21,14 +21,14 @@ struct ocfs2_refcount_tree { struct rb_node rf_node; u64 rf_blkno; u32 rf_generation; + struct kref rf_getcnt; struct rw_semaphore rf_sem; struct ocfs2_lock_res rf_lockres; - struct kref rf_getcnt; int rf_removed; /* the following 4 fields are used by caching_info. */ - struct ocfs2_caching_info rf_ci; spinlock_t rf_lock; + struct ocfs2_caching_info rf_ci; struct mutex rf_io_mutex; struct super_block *rf_sb; }; @@ -52,7 +52,8 @@ int ocfs2_prepare_refcount_change_for_del(struct inode *inode, u32 clusters, int *credits, int *ref_blocks); -int ocfs2_refcount_cow(struct inode *inode, struct buffer_head *di_bh, +int ocfs2_refcount_cow(struct inode *inode, + struct file *filep, struct buffer_head *di_bh, u32 cpos, u32 write_len, u32 max_cpos); typedef int (ocfs2_post_refcount_func)(struct inode *inode, diff --git a/fs/ocfs2/slot_map.c b/fs/ocfs2/slot_map.c index bfbd7e9e949f..ab4e0172cc1d 100644 --- a/fs/ocfs2/slot_map.c +++ b/fs/ocfs2/slot_map.c @@ -357,7 +357,7 @@ static int ocfs2_map_slot_buffers(struct ocfs2_super *osb, { int status = 0; u64 blkno; - unsigned long long blocks, bytes; + unsigned long long blocks, bytes = 0; unsigned int i; struct buffer_head *bh; diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index 0d3049f696c5..19965b00c43c 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -283,6 +283,8 @@ static int o2cb_cluster_connect(struct ocfs2_cluster_connection *conn) /* for now we only have one cluster/node, make sure we see it * in the heartbeat universe */ if (!o2hb_check_local_node_heartbeating()) { + if (o2hb_global_heartbeat_active()) + mlog(ML_ERROR, "Global heartbeat not started\n"); rc = -EINVAL; goto out; } diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index 849c2f0e0a0e..5fed60de7630 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -1380,6 +1380,14 @@ static inline int ocfs2_block_group_set_bits(handle_t *handle, } le16_add_cpu(&bg->bg_free_bits_count, -num_bits); + if (le16_to_cpu(bg->bg_free_bits_count) > le16_to_cpu(bg->bg_bits)) { + ocfs2_error(alloc_inode->i_sb, "Group descriptor # %llu has bit" + " count %u but claims %u are freed. num_bits %d", + (unsigned long long)le64_to_cpu(bg->bg_blkno), + le16_to_cpu(bg->bg_bits), + le16_to_cpu(bg->bg_free_bits_count), num_bits); + return -EROFS; + } while(num_bits--) ocfs2_set_bit(bit_off++, bitmap); @@ -2419,6 +2427,14 @@ static int ocfs2_block_group_clear_bits(handle_t *handle, (unsigned long *) undo_bg->bg_bitmap); } le16_add_cpu(&bg->bg_free_bits_count, num_bits); + if (le16_to_cpu(bg->bg_free_bits_count) > le16_to_cpu(bg->bg_bits)) { + ocfs2_error(alloc_inode->i_sb, "Group descriptor # %llu has bit" + " count %u but claims %u are freed. num_bits %d", + (unsigned long long)le64_to_cpu(bg->bg_blkno), + le16_to_cpu(bg->bg_bits), + le16_to_cpu(bg->bg_free_bits_count), num_bits); + return -EROFS; + } if (undo_fn) jbd_unlock_bh_state(group_bh); diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index fa1be1b304d1..a8a0ca44f88f 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -162,6 +162,7 @@ enum { Opt_nointr, Opt_hb_none, Opt_hb_local, + Opt_hb_global, Opt_data_ordered, Opt_data_writeback, Opt_atime_quantum, @@ -177,6 +178,8 @@ enum { Opt_noacl, Opt_usrquota, Opt_grpquota, + Opt_coherency_buffered, + Opt_coherency_full, Opt_resv_level, Opt_dir_resv_level, Opt_err, @@ -190,6 +193,7 @@ static const match_table_t tokens = { {Opt_nointr, "nointr"}, {Opt_hb_none, OCFS2_HB_NONE}, {Opt_hb_local, OCFS2_HB_LOCAL}, + {Opt_hb_global, OCFS2_HB_GLOBAL}, {Opt_data_ordered, "data=ordered"}, {Opt_data_writeback, "data=writeback"}, {Opt_atime_quantum, "atime_quantum=%u"}, @@ -205,6 +209,8 @@ static const match_table_t tokens = { {Opt_noacl, "noacl"}, {Opt_usrquota, "usrquota"}, {Opt_grpquota, "grpquota"}, + {Opt_coherency_buffered, "coherency=buffered"}, + {Opt_coherency_full, "coherency=full"}, {Opt_resv_level, "resv_level=%u"}, {Opt_dir_resv_level, "dir_resv_level=%u"}, {Opt_err, NULL} @@ -514,11 +520,11 @@ static void ocfs2_release_system_inodes(struct ocfs2_super *osb) mlog_entry_void(); - for (i = 0; i < NUM_SYSTEM_INODES; i++) { - inode = osb->system_inodes[i]; + for (i = 0; i < NUM_GLOBAL_SYSTEM_INODES; i++) { + inode = osb->global_system_inodes[i]; if (inode) { iput(inode); - osb->system_inodes[i] = NULL; + osb->global_system_inodes[i] = NULL; } } @@ -534,6 +540,20 @@ static void ocfs2_release_system_inodes(struct ocfs2_super *osb) osb->root_inode = NULL; } + if (!osb->local_system_inodes) + goto out; + + for (i = 0; i < NUM_LOCAL_SYSTEM_INODES * osb->max_slots; i++) { + if (osb->local_system_inodes[i]) { + iput(osb->local_system_inodes[i]); + osb->local_system_inodes[i] = NULL; + } + } + + kfree(osb->local_system_inodes); + osb->local_system_inodes = NULL; + +out: mlog_exit(0); } @@ -608,6 +628,7 @@ static int ocfs2_remount(struct super_block *sb, int *flags, char *data) int ret = 0; struct mount_options parsed_options; struct ocfs2_super *osb = OCFS2_SB(sb); + u32 tmp; lock_kernel(); @@ -617,8 +638,9 @@ static int ocfs2_remount(struct super_block *sb, int *flags, char *data) goto out; } - if ((osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL) != - (parsed_options.mount_opt & OCFS2_MOUNT_HB_LOCAL)) { + tmp = OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL | + OCFS2_MOUNT_HB_NONE; + if ((osb->s_mount_opt & tmp) != (parsed_options.mount_opt & tmp)) { ret = -EINVAL; mlog(ML_ERROR, "Cannot change heartbeat mode on remount\n"); goto out; @@ -809,23 +831,29 @@ bail: static int ocfs2_verify_heartbeat(struct ocfs2_super *osb) { - if (ocfs2_mount_local(osb)) { - if (osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL) { + u32 hb_enabled = OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL; + + if (osb->s_mount_opt & hb_enabled) { + if (ocfs2_mount_local(osb)) { mlog(ML_ERROR, "Cannot heartbeat on a locally " "mounted device.\n"); return -EINVAL; } - } - - if (ocfs2_userspace_stack(osb)) { - if (osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL) { + if (ocfs2_userspace_stack(osb)) { mlog(ML_ERROR, "Userspace stack expected, but " "o2cb heartbeat arguments passed to mount\n"); return -EINVAL; } + if (((osb->s_mount_opt & OCFS2_MOUNT_HB_GLOBAL) && + !ocfs2_cluster_o2cb_global_heartbeat(osb)) || + ((osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL) && + ocfs2_cluster_o2cb_global_heartbeat(osb))) { + mlog(ML_ERROR, "Mismatching o2cb heartbeat modes\n"); + return -EINVAL; + } } - if (!(osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL)) { + if (!(osb->s_mount_opt & hb_enabled)) { if (!ocfs2_mount_local(osb) && !ocfs2_is_hard_readonly(osb) && !ocfs2_userspace_stack(osb)) { mlog(ML_ERROR, "Heartbeat has to be started to mount " @@ -1291,6 +1319,7 @@ static int ocfs2_parse_options(struct super_block *sb, { int status; char *p; + u32 tmp; mlog_entry("remount: %d, options: \"%s\"\n", is_remount, options ? options : "(none)"); @@ -1322,7 +1351,10 @@ static int ocfs2_parse_options(struct super_block *sb, mopt->mount_opt |= OCFS2_MOUNT_HB_LOCAL; break; case Opt_hb_none: - mopt->mount_opt &= ~OCFS2_MOUNT_HB_LOCAL; + mopt->mount_opt |= OCFS2_MOUNT_HB_NONE; + break; + case Opt_hb_global: + mopt->mount_opt |= OCFS2_MOUNT_HB_GLOBAL; break; case Opt_barrier: if (match_int(&args[0], &option)) { @@ -1438,6 +1470,12 @@ static int ocfs2_parse_options(struct super_block *sb, case Opt_grpquota: mopt->mount_opt |= OCFS2_MOUNT_GRPQUOTA; break; + case Opt_coherency_buffered: + mopt->mount_opt |= OCFS2_MOUNT_COHERENCY_BUFFERED; + break; + case Opt_coherency_full: + mopt->mount_opt &= ~OCFS2_MOUNT_COHERENCY_BUFFERED; + break; case Opt_acl: mopt->mount_opt |= OCFS2_MOUNT_POSIX_ACL; mopt->mount_opt &= ~OCFS2_MOUNT_NO_POSIX_ACL; @@ -1477,6 +1515,15 @@ static int ocfs2_parse_options(struct super_block *sb, } } + /* Ensure only one heartbeat mode */ + tmp = mopt->mount_opt & (OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL | + OCFS2_MOUNT_HB_NONE); + if (hweight32(tmp) != 1) { + mlog(ML_ERROR, "Invalid heartbeat mount options\n"); + status = 0; + goto bail; + } + status = 1; bail: @@ -1490,10 +1537,14 @@ static int ocfs2_show_options(struct seq_file *s, struct vfsmount *mnt) unsigned long opts = osb->s_mount_opt; unsigned int local_alloc_megs; - if (opts & OCFS2_MOUNT_HB_LOCAL) - seq_printf(s, ",_netdev,heartbeat=local"); - else - seq_printf(s, ",heartbeat=none"); + if (opts & (OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL)) { + seq_printf(s, ",_netdev"); + if (opts & OCFS2_MOUNT_HB_LOCAL) + seq_printf(s, ",%s", OCFS2_HB_LOCAL); + else + seq_printf(s, ",%s", OCFS2_HB_GLOBAL); + } else + seq_printf(s, ",%s", OCFS2_HB_NONE); if (opts & OCFS2_MOUNT_NOINTR) seq_printf(s, ",nointr"); @@ -1536,6 +1587,11 @@ static int ocfs2_show_options(struct seq_file *s, struct vfsmount *mnt) if (opts & OCFS2_MOUNT_GRPQUOTA) seq_printf(s, ",grpquota"); + if (opts & OCFS2_MOUNT_COHERENCY_BUFFERED) + seq_printf(s, ",coherency=buffered"); + else + seq_printf(s, ",coherency=full"); + if (opts & OCFS2_MOUNT_NOUSERXATTR) seq_printf(s, ",nouser_xattr"); else @@ -1990,6 +2046,36 @@ static int ocfs2_setup_osb_uuid(struct ocfs2_super *osb, const unsigned char *uu return 0; } +/* Make sure entire volume is addressable by our journal. Requires + osb_clusters_at_boot to be valid and for the journal to have been + initialized by ocfs2_journal_init(). */ +static int ocfs2_journal_addressable(struct ocfs2_super *osb) +{ + int status = 0; + u64 max_block = + ocfs2_clusters_to_blocks(osb->sb, + osb->osb_clusters_at_boot) - 1; + + /* 32-bit block number is always OK. */ + if (max_block <= (u32)~0ULL) + goto out; + + /* Volume is "huge", so see if our journal is new enough to + support it. */ + if (!(OCFS2_HAS_COMPAT_FEATURE(osb->sb, + OCFS2_FEATURE_COMPAT_JBD2_SB) && + jbd2_journal_check_used_features(osb->journal->j_journal, 0, 0, + JBD2_FEATURE_INCOMPAT_64BIT))) { + mlog(ML_ERROR, "The journal cannot address the entire volume. " + "Enable the 'block64' journal option with tunefs.ocfs2"); + status = -EFBIG; + goto out; + } + + out: + return status; +} + static int ocfs2_initialize_super(struct super_block *sb, struct buffer_head *bh, int sector_size, @@ -2002,6 +2088,7 @@ static int ocfs2_initialize_super(struct super_block *sb, struct ocfs2_journal *journal; __le32 uuid_net_key; struct ocfs2_super *osb; + u64 total_blocks; mlog_entry_void(); @@ -2060,6 +2147,15 @@ static int ocfs2_initialize_super(struct super_block *sb, snprintf(osb->dev_str, sizeof(osb->dev_str), "%u,%u", MAJOR(osb->sb->s_dev), MINOR(osb->sb->s_dev)); + osb->max_slots = le16_to_cpu(di->id2.i_super.s_max_slots); + if (osb->max_slots > OCFS2_MAX_SLOTS || osb->max_slots == 0) { + mlog(ML_ERROR, "Invalid number of node slots (%u)\n", + osb->max_slots); + status = -EINVAL; + goto bail; + } + mlog(0, "max_slots for this device: %u\n", osb->max_slots); + ocfs2_orphan_scan_init(osb); status = ocfs2_recovery_init(osb); @@ -2098,15 +2194,6 @@ static int ocfs2_initialize_super(struct super_block *sb, goto bail; } - osb->max_slots = le16_to_cpu(di->id2.i_super.s_max_slots); - if (osb->max_slots > OCFS2_MAX_SLOTS || osb->max_slots == 0) { - mlog(ML_ERROR, "Invalid number of node slots (%u)\n", - osb->max_slots); - status = -EINVAL; - goto bail; - } - mlog(0, "max_slots for this device: %u\n", osb->max_slots); - osb->slot_recovery_generations = kcalloc(osb->max_slots, sizeof(*osb->slot_recovery_generations), GFP_KERNEL); @@ -2149,7 +2236,9 @@ static int ocfs2_initialize_super(struct super_block *sb, goto bail; } - if (ocfs2_userspace_stack(osb)) { + if (ocfs2_clusterinfo_valid(osb)) { + osb->osb_stackflags = + OCFS2_RAW_SB(di)->s_cluster_info.ci_stackflags; memcpy(osb->osb_cluster_stack, OCFS2_RAW_SB(di)->s_cluster_info.ci_stack, OCFS2_STACK_LABEL_LEN); @@ -2214,11 +2303,15 @@ static int ocfs2_initialize_super(struct super_block *sb, goto bail; } - if (ocfs2_clusters_to_blocks(osb->sb, le32_to_cpu(di->i_clusters) - 1) - > (u32)~0UL) { - mlog(ML_ERROR, "Volume might try to write to blocks beyond " - "what jbd can address in 32 bits.\n"); - status = -EINVAL; + total_blocks = ocfs2_clusters_to_blocks(osb->sb, + le32_to_cpu(di->i_clusters)); + + status = generic_check_addressable(osb->sb->s_blocksize_bits, + total_blocks); + if (status) { + mlog(ML_ERROR, "Volume too large " + "to mount safely on this system"); + status = -EFBIG; goto bail; } @@ -2380,6 +2473,12 @@ static int ocfs2_check_volume(struct ocfs2_super *osb) goto finally; } + /* Now that journal has been initialized, check to make sure + entire volume is addressable. */ + status = ocfs2_journal_addressable(osb); + if (status) + goto finally; + /* If the journal was unmounted cleanly then we don't want to * recover anything. Otherwise, journal_load will do that * dirty work for us :) */ diff --git a/fs/ocfs2/sysfile.c b/fs/ocfs2/sysfile.c index bfe7190cdbf1..902efb23b6a6 100644 --- a/fs/ocfs2/sysfile.c +++ b/fs/ocfs2/sysfile.c @@ -44,11 +44,6 @@ static struct inode * _ocfs2_get_system_file_inode(struct ocfs2_super *osb, int type, u32 slot); -static inline int is_global_system_inode(int type); -static inline int is_in_system_inode_array(struct ocfs2_super *osb, - int type, - u32 slot); - #ifdef CONFIG_DEBUG_LOCK_ALLOC static struct lock_class_key ocfs2_sysfile_cluster_lock_key[NUM_SYSTEM_INODES]; #endif @@ -59,11 +54,52 @@ static inline int is_global_system_inode(int type) type <= OCFS2_LAST_GLOBAL_SYSTEM_INODE; } -static inline int is_in_system_inode_array(struct ocfs2_super *osb, - int type, - u32 slot) +static struct inode **get_local_system_inode(struct ocfs2_super *osb, + int type, + u32 slot) { - return slot == osb->slot_num || is_global_system_inode(type); + int index; + struct inode **local_system_inodes, **free = NULL; + + BUG_ON(slot == OCFS2_INVALID_SLOT); + BUG_ON(type < OCFS2_FIRST_LOCAL_SYSTEM_INODE || + type > OCFS2_LAST_LOCAL_SYSTEM_INODE); + + spin_lock(&osb->osb_lock); + local_system_inodes = osb->local_system_inodes; + spin_unlock(&osb->osb_lock); + + if (unlikely(!local_system_inodes)) { + local_system_inodes = kzalloc(sizeof(struct inode *) * + NUM_LOCAL_SYSTEM_INODES * + osb->max_slots, + GFP_NOFS); + if (!local_system_inodes) { + mlog_errno(-ENOMEM); + /* + * return NULL here so that ocfs2_get_sytem_file_inodes + * will try to create an inode and use it. We will try + * to initialize local_system_inodes next time. + */ + return NULL; + } + + spin_lock(&osb->osb_lock); + if (osb->local_system_inodes) { + /* Someone has initialized it for us. */ + free = local_system_inodes; + local_system_inodes = osb->local_system_inodes; + } else + osb->local_system_inodes = local_system_inodes; + spin_unlock(&osb->osb_lock); + if (unlikely(free)) + kfree(free); + } + + index = (slot * NUM_LOCAL_SYSTEM_INODES) + + (type - OCFS2_FIRST_LOCAL_SYSTEM_INODE); + + return &local_system_inodes[index]; } struct inode *ocfs2_get_system_file_inode(struct ocfs2_super *osb, @@ -74,8 +110,10 @@ struct inode *ocfs2_get_system_file_inode(struct ocfs2_super *osb, struct inode **arr = NULL; /* avoid the lookup if cached in local system file array */ - if (is_in_system_inode_array(osb, type, slot)) - arr = &(osb->system_inodes[type]); + if (is_global_system_inode(type)) { + arr = &(osb->global_system_inodes[type]); + } else + arr = get_local_system_inode(osb, type, slot); if (arr && ((inode = *arr) != NULL)) { /* get a ref in addition to the array ref */ diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 06fa5e77c40e..67cd43914641 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -7081,7 +7081,7 @@ static int ocfs2_reflink_xattr_in_block(struct ocfs2_xattr_reflink *args, goto out; } - if (!(le16_to_cpu(xb->xb_flags) & OCFS2_XATTR_INDEXED)) + if (!indexed) ret = ocfs2_reflink_xattr_block(args, blk_bh, new_blk_bh); else ret = ocfs2_reflink_xattr_tree(args, blk_bh, new_blk_bh); diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c index 23c1e598792a..442f34ff1af8 100644 --- a/fs/sysfs/group.c +++ b/fs/sysfs/group.c @@ -148,6 +148,65 @@ void sysfs_remove_group(struct kobject * kobj, sysfs_put(sd); } +/** + * sysfs_merge_group - merge files into a pre-existing attribute group. + * @kobj: The kobject containing the group. + * @grp: The files to create and the attribute group they belong to. + * + * This function returns an error if the group doesn't exist or any of the + * files already exist in that group, in which case none of the new files + * are created. + */ +int sysfs_merge_group(struct kobject *kobj, + const struct attribute_group *grp) +{ + struct sysfs_dirent *dir_sd; + int error = 0; + struct attribute *const *attr; + int i; + + if (grp) + dir_sd = sysfs_get_dirent(kobj->sd, NULL, grp->name); + else + dir_sd = sysfs_get(kobj->sd); + if (!dir_sd) + return -ENOENT; + + for ((i = 0, attr = grp->attrs); *attr && !error; (++i, ++attr)) + error = sysfs_add_file(dir_sd, *attr, SYSFS_KOBJ_ATTR); + if (error) { + while (--i >= 0) + sysfs_hash_and_remove(dir_sd, NULL, (*--attr)->name); + } + sysfs_put(dir_sd); + + return error; +} +EXPORT_SYMBOL_GPL(sysfs_merge_group); + +/** + * sysfs_unmerge_group - remove files from a pre-existing attribute group. + * @kobj: The kobject containing the group. + * @grp: The files to remove and the attribute group they belong to. + */ +void sysfs_unmerge_group(struct kobject *kobj, + const struct attribute_group *grp) +{ + struct sysfs_dirent *dir_sd; + struct attribute *const *attr; + + if (grp) + dir_sd = sysfs_get_dirent(kobj->sd, NULL, grp->name); + else + dir_sd = sysfs_get(kobj->sd); + if (dir_sd) { + for (attr = grp->attrs; *attr; ++attr) + sysfs_hash_and_remove(dir_sd, NULL, (*attr)->name); + sysfs_put(dir_sd); + } +} +EXPORT_SYMBOL_GPL(sysfs_unmerge_group); + EXPORT_SYMBOL_GPL(sysfs_create_group); EXPORT_SYMBOL_GPL(sysfs_update_group); diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h index e53347fbf1da..fd57b8477fab 100644 --- a/include/asm-generic/atomic.h +++ b/include/asm-generic/atomic.h @@ -43,6 +43,7 @@ */ #define atomic_set(v, i) (((v)->counter) = (i)) +#include <linux/irqflags.h> #include <asm/system.h> /** @@ -57,7 +58,7 @@ static inline int atomic_add_return(int i, atomic_t *v) unsigned long flags; int temp; - raw_local_irq_save(flags); /* Don't trace it in a irqsoff handler */ + raw_local_irq_save(flags); /* Don't trace it in an irqsoff handler */ temp = v->counter; temp += i; v->counter = temp; @@ -78,7 +79,7 @@ static inline int atomic_sub_return(int i, atomic_t *v) unsigned long flags; int temp; - raw_local_irq_save(flags); /* Don't trace it in a irqsoff handler */ + raw_local_irq_save(flags); /* Don't trace it in an irqsoff handler */ temp = v->counter; temp -= i; v->counter = temp; diff --git a/include/asm-generic/cmpxchg-local.h b/include/asm-generic/cmpxchg-local.h index b2ba2fc8829a..2533fddd34a6 100644 --- a/include/asm-generic/cmpxchg-local.h +++ b/include/asm-generic/cmpxchg-local.h @@ -2,6 +2,7 @@ #define __ASM_GENERIC_CMPXCHG_LOCAL_H #include <linux/types.h> +#include <linux/irqflags.h> extern unsigned long wrong_size_cmpxchg(volatile void *ptr); diff --git a/include/asm-generic/irqflags.h b/include/asm-generic/irqflags.h index 9aebf618275a..1f40d0024cf3 100644 --- a/include/asm-generic/irqflags.h +++ b/include/asm-generic/irqflags.h @@ -5,68 +5,62 @@ * All architectures should implement at least the first two functions, * usually inline assembly will be the best way. */ -#ifndef RAW_IRQ_DISABLED -#define RAW_IRQ_DISABLED 0 -#define RAW_IRQ_ENABLED 1 +#ifndef ARCH_IRQ_DISABLED +#define ARCH_IRQ_DISABLED 0 +#define ARCH_IRQ_ENABLED 1 #endif /* read interrupt enabled status */ -#ifndef __raw_local_save_flags -unsigned long __raw_local_save_flags(void); +#ifndef arch_local_save_flags +unsigned long arch_local_save_flags(void); #endif /* set interrupt enabled status */ -#ifndef raw_local_irq_restore -void raw_local_irq_restore(unsigned long flags); +#ifndef arch_local_irq_restore +void arch_local_irq_restore(unsigned long flags); #endif /* get status and disable interrupts */ -#ifndef __raw_local_irq_save -static inline unsigned long __raw_local_irq_save(void) +#ifndef arch_local_irq_save +static inline unsigned long arch_local_irq_save(void) { unsigned long flags; - flags = __raw_local_save_flags(); - raw_local_irq_restore(RAW_IRQ_DISABLED); + flags = arch_local_save_flags(); + arch_local_irq_restore(ARCH_IRQ_DISABLED); return flags; } #endif /* test flags */ -#ifndef raw_irqs_disabled_flags -static inline int raw_irqs_disabled_flags(unsigned long flags) +#ifndef arch_irqs_disabled_flags +static inline int arch_irqs_disabled_flags(unsigned long flags) { - return flags == RAW_IRQ_DISABLED; + return flags == ARCH_IRQ_DISABLED; } #endif /* unconditionally enable interrupts */ -#ifndef raw_local_irq_enable -static inline void raw_local_irq_enable(void) +#ifndef arch_local_irq_enable +static inline void arch_local_irq_enable(void) { - raw_local_irq_restore(RAW_IRQ_ENABLED); + arch_local_irq_restore(ARCH_IRQ_ENABLED); } #endif /* unconditionally disable interrupts */ -#ifndef raw_local_irq_disable -static inline void raw_local_irq_disable(void) +#ifndef arch_local_irq_disable +static inline void arch_local_irq_disable(void) { - raw_local_irq_restore(RAW_IRQ_DISABLED); + arch_local_irq_restore(ARCH_IRQ_DISABLED); } #endif /* test hardware interrupt enable bit */ -#ifndef raw_irqs_disabled -static inline int raw_irqs_disabled(void) +#ifndef arch_irqs_disabled +static inline int arch_irqs_disabled(void) { - return raw_irqs_disabled_flags(__raw_local_save_flags()); + return arch_irqs_disabled_flags(arch_local_save_flags()); } #endif -#define raw_local_save_flags(flags) \ - do { (flags) = __raw_local_save_flags(); } while (0) - -#define raw_local_irq_save(flags) \ - do { (flags) = __raw_local_irq_save(); } while (0) - #endif /* __ASM_GENERIC_IRQFLAGS_H */ diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index b0c174012436..c6454cca0447 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -20,6 +20,7 @@ #include <linux/resource.h> #define AMBA_NR_IRQS 2 +#define AMBA_CID 0xb105f00d struct clk; @@ -70,9 +71,15 @@ void amba_release_regions(struct amba_device *); #define amba_pclk_disable(d) \ do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0) -#define amba_config(d) (((d)->periphid >> 24) & 0xff) -#define amba_rev(d) (((d)->periphid >> 20) & 0x0f) -#define amba_manf(d) (((d)->periphid >> 12) & 0xff) -#define amba_part(d) ((d)->periphid & 0xfff) +/* Some drivers don't use the struct amba_device */ +#define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) +#define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) +#define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff) +#define AMBA_PART_BITS(a) ((a) & 0xfff) + +#define amba_config(d) AMBA_CONFIG_BITS((d)->periphid) +#define amba_rev(d) AMBA_REV_BITS((d)->periphid) +#define amba_manf(d) AMBA_MANF_BITS((d)->periphid) +#define amba_part(d) AMBA_PART_BITS((d)->periphid) #endif diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index ca84ce70d5d5..f4ee9acc9721 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -24,6 +24,7 @@ * whether a card is present in the MMC slot or not * @gpio_wp: read this GPIO pin to see if the card is write protected * @gpio_cd: read this GPIO pin to detect card insertion + * @cd_invert: true if the gpio_cd pin value is active low * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h */ @@ -35,6 +36,7 @@ struct mmci_platform_data { unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; + bool cd_invert; unsigned long capabilities; }; diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index abf26cc47a2b..4ce98f54186b 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -228,6 +228,7 @@ enum ssp_chip_select { }; +struct dma_chan; /** * struct pl022_ssp_master - device.platform_data for SPI controller devices. * @num_chipselect: chipselects are used to distinguish individual @@ -235,11 +236,16 @@ enum ssp_chip_select { * each slave has a chipselect signal, but it's common that not * every chipselect is connected to a slave. * @enable_dma: if true enables DMA driven transfers. + * @dma_rx_param: parameter to locate an RX DMA channel. + * @dma_tx_param: parameter to locate a TX DMA channel. */ struct pl022_ssp_controller { u16 bus_id; u8 num_chipselect; u8 enable_dma:1; + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); + void *dma_rx_param; + void *dma_tx_param; }; /** @@ -270,20 +276,13 @@ struct pl022_ssp_controller { * @dma_config: DMA configuration for SSP controller and peripheral */ struct pl022_config_chip { - struct device *dev; - enum ssp_loopback lbm; enum ssp_interface iface; enum ssp_hierarchy hierarchy; bool slave_tx_disable; struct ssp_clock_params clk_freq; - enum ssp_rx_endian endian_rx; - enum ssp_tx_endian endian_tx; - enum ssp_data_size data_size; enum ssp_mode com_mode; enum ssp_rx_level_trig rx_lev_trig; enum ssp_tx_level_trig tx_lev_trig; - enum ssp_spi_clk_phase clk_phase; - enum ssp_spi_clk_pol clk_pol; enum ssp_microwire_ctrl_len ctrl_len; enum ssp_microwire_wait_state wait_state; enum ssp_duplex duplex; diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index e1b634b635f2..6021588ba0a8 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -32,7 +32,9 @@ #define UART01x_RSR 0x04 /* Receive status register (Read). */ #define UART01x_ECR 0x04 /* Error clear register (Write). */ #define UART010_LCRH 0x08 /* Line control register, high byte. */ +#define ST_UART011_DMAWM 0x08 /* DMA watermark configure register. */ #define UART010_LCRM 0x0C /* Line control register, middle byte. */ +#define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */ #define UART010_LCRL 0x10 /* Line control register, low byte. */ #define UART010_CR 0x14 /* Control register. */ #define UART01x_FR 0x18 /* Flag register (Read only). */ @@ -51,6 +53,15 @@ #define UART011_MIS 0x40 /* Masked interrupt status. */ #define UART011_ICR 0x44 /* Interrupt clear register. */ #define UART011_DMACR 0x48 /* DMA control register. */ +#define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */ +#define ST_UART011_XON1 0x54 /* XON1 register. */ +#define ST_UART011_XON2 0x58 /* XON2 register. */ +#define ST_UART011_XOFF1 0x5C /* XON1 register. */ +#define ST_UART011_XOFF2 0x60 /* XON2 register. */ +#define ST_UART011_ITCR 0x80 /* Integration test control register. */ +#define ST_UART011_ITIP 0x84 /* Integration test input register. */ +#define ST_UART011_ABCR 0x100 /* Autobaud control register. */ +#define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */ #define UART011_DR_OE (1 << 11) #define UART011_DR_BE (1 << 10) diff --git a/include/linux/ata.h b/include/linux/ata.h index fe6e681a9d74..0c4929fa34d3 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -89,6 +89,7 @@ enum { ATA_ID_SPG = 98, ATA_ID_LBA_CAPACITY_2 = 100, ATA_ID_SECTOR_SIZE = 106, + ATA_ID_LOGICAL_SECTOR_SIZE = 117, /* and 118 */ ATA_ID_LAST_LUN = 126, ATA_ID_DLF = 128, ATA_ID_CSFO = 129, @@ -640,16 +641,49 @@ static inline int ata_id_flush_ext_enabled(const u16 *id) return (id[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400; } -static inline int ata_id_has_large_logical_sectors(const u16 *id) +static inline u32 ata_id_logical_sector_size(const u16 *id) { - if ((id[ATA_ID_SECTOR_SIZE] & 0xc000) != 0x4000) - return 0; - return id[ATA_ID_SECTOR_SIZE] & (1 << 13); + /* T13/1699-D Revision 6a, Sep 6, 2008. Page 128. + * IDENTIFY DEVICE data, word 117-118. + * 0xd000 ignores bit 13 (logical:physical > 1) + */ + if ((id[ATA_ID_SECTOR_SIZE] & 0xd000) == 0x5000) + return (((id[ATA_ID_LOGICAL_SECTOR_SIZE+1] << 16) + + id[ATA_ID_LOGICAL_SECTOR_SIZE]) * sizeof(u16)) ; + return ATA_SECT_SIZE; +} + +static inline u8 ata_id_log2_per_physical_sector(const u16 *id) +{ + /* T13/1699-D Revision 6a, Sep 6, 2008. Page 128. + * IDENTIFY DEVICE data, word 106. + * 0xe000 ignores bit 12 (logical sector > 512 bytes) + */ + if ((id[ATA_ID_SECTOR_SIZE] & 0xe000) == 0x6000) + return (id[ATA_ID_SECTOR_SIZE] & 0xf); + return 0; } -static inline u16 ata_id_logical_per_physical_sectors(const u16 *id) +/* Offset of logical sectors relative to physical sectors. + * + * If device has more than one logical sector per physical sector + * (aka 512 byte emulation), vendors might offset the "sector 0" address + * so sector 63 is "naturally aligned" - e.g. FAT partition table. + * This avoids Read/Mod/Write penalties when using FAT partition table + * and updating "well aligned" (FS perspective) physical sectors on every + * transaction. + */ +static inline u16 ata_id_logical_sector_offset(const u16 *id, + u8 log2_per_phys) { - return 1 << (id[ATA_ID_SECTOR_SIZE] & 0xf); + u16 word_209 = id[209]; + + if ((log2_per_phys > 1) && (word_209 & 0xc000) == 0x4000) { + u16 first = word_209 & 0x3fff; + if (first > 0) + return (1 << log2_per_phys) - first; + } + return 0; } static inline int ata_id_has_lba48(const u16 *id) diff --git a/include/linux/dmar.h b/include/linux/dmar.h index 51651b76d40f..a7d9dc21391d 100644 --- a/include/linux/dmar.h +++ b/include/linux/dmar.h @@ -57,15 +57,15 @@ extern int dmar_table_init(void); extern int dmar_dev_scope_init(void); /* Intel IOMMU detection */ -extern void detect_intel_iommu(void); +extern int detect_intel_iommu(void); extern int enable_drhd_fault_handling(void); extern int parse_ioapics_under_ir(void); extern int alloc_iommu(struct dmar_drhd_unit *); #else -static inline void detect_intel_iommu(void) +static inline int detect_intel_iommu(void) { - return; + return -ENODEV; } static inline int dmar_table_init(void) diff --git a/include/linux/early_res.h b/include/linux/early_res.h deleted file mode 100644 index 29c09f57a13c..000000000000 --- a/include/linux/early_res.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _LINUX_EARLY_RES_H -#define _LINUX_EARLY_RES_H -#ifdef __KERNEL__ - -extern void reserve_early(u64 start, u64 end, char *name); -extern void reserve_early_overlap_ok(u64 start, u64 end, char *name); -extern void free_early(u64 start, u64 end); -void free_early_partial(u64 start, u64 end); -extern void early_res_to_bootmem(u64 start, u64 end); - -void reserve_early_without_check(u64 start, u64 end, char *name); -u64 find_early_area(u64 ei_start, u64 ei_last, u64 start, u64 end, - u64 size, u64 align); -u64 find_early_area_size(u64 ei_start, u64 ei_last, u64 start, - u64 *sizep, u64 align); -u64 find_fw_memmap_area(u64 start, u64 end, u64 size, u64 align); -u64 get_max_mapped(void); -#include <linux/range.h> -int get_free_all_memory_range(struct range **rangep, int nodeid); - -#endif /* __KERNEL__ */ - -#endif /* _LINUX_EARLY_RES_H */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 3168dcfb94f2..7d6f18fddfdb 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2378,6 +2378,8 @@ extern ssize_t simple_write_to_buffer(void *to, size_t available, loff_t *ppos, extern int generic_file_fsync(struct file *, int); +extern int generic_check_addressable(unsigned, u64); + #ifdef CONFIG_MIGRATION extern int buffer_migrate_page(struct address_space *, struct page *, struct page *); diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 96c323ac44df..8a389b608ce3 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -8,7 +8,6 @@ #include <linux/lockdep.h> #include <linux/ftrace_irq.h> #include <asm/hardirq.h> -#include <asm/system.h> /* * We put the hardirq and softirq counter into the preemption diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 414328577ced..07f741a075a7 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -410,7 +410,7 @@ extern void open_softirq(int nr, void (*action)(struct softirq_action *)); extern void softirq_init(void); static inline void __raise_softirq_irqoff(unsigned int nr) { - trace_softirq_raise((struct softirq_action *)(unsigned long)nr, NULL); + trace_softirq_raise(nr); or_softirq_pending(1UL << nr); } diff --git a/include/linux/irqflags.h b/include/linux/irqflags.h index 006bf45eae30..d176d658fe25 100644 --- a/include/linux/irqflags.h +++ b/include/linux/irqflags.h @@ -12,6 +12,7 @@ #define _LINUX_TRACE_IRQFLAGS_H #include <linux/typecheck.h> +#include <asm/irqflags.h> #ifdef CONFIG_TRACE_IRQFLAGS extern void trace_softirqs_on(unsigned long ip); @@ -52,17 +53,45 @@ # define start_critical_timings() do { } while (0) #endif -#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT - -#include <asm/irqflags.h> +/* + * Wrap the arch provided IRQ routines to provide appropriate checks. + */ +#define raw_local_irq_disable() arch_local_irq_disable() +#define raw_local_irq_enable() arch_local_irq_enable() +#define raw_local_irq_save(flags) \ + do { \ + typecheck(unsigned long, flags); \ + flags = arch_local_irq_save(); \ + } while (0) +#define raw_local_irq_restore(flags) \ + do { \ + typecheck(unsigned long, flags); \ + arch_local_irq_restore(flags); \ + } while (0) +#define raw_local_save_flags(flags) \ + do { \ + typecheck(unsigned long, flags); \ + flags = arch_local_save_flags(); \ + } while (0) +#define raw_irqs_disabled_flags(flags) \ + ({ \ + typecheck(unsigned long, flags); \ + arch_irqs_disabled_flags(flags); \ + }) +#define raw_irqs_disabled() (arch_irqs_disabled()) +#define raw_safe_halt() arch_safe_halt() +/* + * The local_irq_*() APIs are equal to the raw_local_irq*() + * if !TRACE_IRQFLAGS. + */ +#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT #define local_irq_enable() \ do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0) #define local_irq_disable() \ do { raw_local_irq_disable(); trace_hardirqs_off(); } while (0) #define local_irq_save(flags) \ do { \ - typecheck(unsigned long, flags); \ raw_local_irq_save(flags); \ trace_hardirqs_off(); \ } while (0) @@ -70,7 +99,6 @@ #define local_irq_restore(flags) \ do { \ - typecheck(unsigned long, flags); \ if (raw_irqs_disabled_flags(flags)) { \ raw_local_irq_restore(flags); \ trace_hardirqs_off(); \ @@ -79,51 +107,44 @@ raw_local_irq_restore(flags); \ } \ } while (0) -#else /* !CONFIG_TRACE_IRQFLAGS_SUPPORT */ -/* - * The local_irq_*() APIs are equal to the raw_local_irq*() - * if !TRACE_IRQFLAGS. - */ -# define raw_local_irq_disable() local_irq_disable() -# define raw_local_irq_enable() local_irq_enable() -# define raw_local_irq_save(flags) \ - do { \ - typecheck(unsigned long, flags); \ - local_irq_save(flags); \ - } while (0) -# define raw_local_irq_restore(flags) \ +#define local_save_flags(flags) \ do { \ - typecheck(unsigned long, flags); \ - local_irq_restore(flags); \ + raw_local_save_flags(flags); \ } while (0) -#endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */ -#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT -#define safe_halt() \ - do { \ - trace_hardirqs_on(); \ - raw_safe_halt(); \ - } while (0) +#define irqs_disabled_flags(flags) \ + ({ \ + raw_irqs_disabled_flags(flags); \ + }) -#define local_save_flags(flags) \ - do { \ - typecheck(unsigned long, flags); \ - raw_local_save_flags(flags); \ +#define irqs_disabled() \ + ({ \ + unsigned long _flags; \ + raw_local_save_flags(_flags); \ + raw_irqs_disabled_flags(_flags); \ + }) + +#define safe_halt() \ + do { \ + trace_hardirqs_on(); \ + raw_safe_halt(); \ } while (0) -#define irqs_disabled() \ -({ \ - unsigned long _flags; \ - \ - raw_local_save_flags(_flags); \ - raw_irqs_disabled_flags(_flags); \ -}) -#define irqs_disabled_flags(flags) \ -({ \ - typecheck(unsigned long, flags); \ - raw_irqs_disabled_flags(flags); \ -}) +#else /* !CONFIG_TRACE_IRQFLAGS_SUPPORT */ + +#define local_irq_enable() do { raw_local_irq_enable(); } while (0) +#define local_irq_disable() do { raw_local_irq_disable(); } while (0) +#define local_irq_save(flags) \ + do { \ + raw_local_irq_save(flags); \ + } while (0) +#define local_irq_restore(flags) do { raw_local_irq_restore(flags); } while (0) +#define local_save_flags(flags) do { raw_local_save_flags(flags); } while (0) +#define irqs_disabled() (raw_irqs_disabled()) +#define irqs_disabled_flags(flags) (raw_irqs_disabled_flags(flags)) +#define safe_halt() do { raw_safe_halt(); } while (0) + #endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */ #endif diff --git a/include/linux/libata.h b/include/linux/libata.h index 45fb2967b66d..15b77b8dc7e1 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -37,6 +37,7 @@ #include <scsi/scsi_host.h> #include <linux/acpi.h> #include <linux/cdrom.h> +#include <linux/sched.h> /* * Define if arch has non-standard setup. This is a _PCI_ standard @@ -172,6 +173,7 @@ enum { ATA_LFLAG_NO_RETRY = (1 << 5), /* don't retry this link */ ATA_LFLAG_DISABLED = (1 << 6), /* link is disabled */ ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */ + ATA_LFLAG_NO_LPM = (1 << 8), /* disable LPM on this link */ /* struct ata_port flags */ ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ @@ -196,7 +198,7 @@ enum { ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */ ATA_FLAG_AN = (1 << 18), /* controller supports AN */ ATA_FLAG_PMP = (1 << 19), /* controller supports PMP */ - ATA_FLAG_IPM = (1 << 20), /* driver can handle IPM */ + ATA_FLAG_LPM = (1 << 20), /* driver can handle LPM */ ATA_FLAG_EM = (1 << 21), /* driver supports enclosure * management */ ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity @@ -324,12 +326,11 @@ enum { ATA_EH_HARDRESET = (1 << 2), /* meaningful only in ->prereset */ ATA_EH_RESET = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, ATA_EH_ENABLE_LINK = (1 << 3), - ATA_EH_LPM = (1 << 4), /* link power management action */ ATA_EH_PARK = (1 << 5), /* unload heads and stop I/O */ ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_PARK, ATA_EH_ALL_ACTIONS = ATA_EH_REVALIDATE | ATA_EH_RESET | - ATA_EH_ENABLE_LINK | ATA_EH_LPM, + ATA_EH_ENABLE_LINK, /* ata_eh_info->flags */ ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ @@ -341,7 +342,7 @@ enum { ATA_EHI_DID_HARDRESET = (1 << 17), /* already soft-reset this port */ ATA_EHI_PRINTINFO = (1 << 18), /* print configuration info */ ATA_EHI_SETMODE = (1 << 19), /* configure transfer mode */ - ATA_EHI_POST_SETMODE = (1 << 20), /* revaildating after setmode */ + ATA_EHI_POST_SETMODE = (1 << 20), /* revalidating after setmode */ ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET, @@ -377,7 +378,6 @@ enum { ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */ ATA_HORKAGE_DISABLE = (1 << 5), /* Disable it */ ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */ - ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */ ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */ ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */ ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */ @@ -464,6 +464,22 @@ enum ata_completion_errors { AC_ERR_NCQ = (1 << 10), /* marker for offending NCQ qc */ }; +/* + * Link power management policy: If you alter this, you also need to + * alter libata-scsi.c (for the ascii descriptions) + */ +enum ata_lpm_policy { + ATA_LPM_UNKNOWN, + ATA_LPM_MAX_POWER, + ATA_LPM_MED_POWER, + ATA_LPM_MIN_POWER, +}; + +enum ata_lpm_hints { + ATA_LPM_EMPTY = (1 << 0), /* port empty/probing */ + ATA_LPM_HIPM = (1 << 1), /* may use HIPM */ +}; + /* forward declarations */ struct scsi_device; struct ata_port_operations; @@ -478,16 +494,6 @@ typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes, unsigned long deadline); typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes); -/* - * host pm policy: If you alter this, you also need to alter libata-scsi.c - * (for the ascii descriptions) - */ -enum link_pm { - NOT_AVAILABLE, - MIN_POWER, - MAX_PERFORMANCE, - MEDIUM_POWER, -}; extern struct device_attribute dev_attr_link_power_management_policy; extern struct device_attribute dev_attr_unload_heads; extern struct device_attribute dev_attr_em_message_type; @@ -530,6 +536,10 @@ struct ata_host { void *private_data; struct ata_port_operations *ops; unsigned long flags; + + struct mutex eh_mutex; + struct task_struct *eh_owner; + #ifdef CONFIG_ATA_ACPI acpi_handle acpi_handle; #endif @@ -560,13 +570,13 @@ struct ata_queued_cmd { unsigned int extrabytes; unsigned int curbytes; - struct scatterlist *cursg; - unsigned int cursg_ofs; - struct scatterlist sgent; struct scatterlist *sg; + struct scatterlist *cursg; + unsigned int cursg_ofs; + unsigned int err_mask; struct ata_taskfile result_tf; ata_qc_cb_t complete_fn; @@ -604,6 +614,7 @@ struct ata_device { union acpi_object *gtf_cache; unsigned int gtf_filter; #endif + struct device tdev; /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */ u64 n_sectors; /* size of device, if ATA */ u64 n_native_sectors; /* native size, if ATA */ @@ -690,6 +701,7 @@ struct ata_link { struct ata_port *ap; int pmp; /* port multiplier port # */ + struct device tdev; unsigned int active_tag; /* active tag on this link */ u32 sactive; /* active NCQ commands */ @@ -699,6 +711,7 @@ struct ata_link { unsigned int hw_sata_spd_limit; unsigned int sata_spd_limit; unsigned int sata_spd; /* current SATA PHY speed */ + enum ata_lpm_policy lpm_policy; /* record runtime error info, protected by host_set lock */ struct ata_eh_info eh_info; @@ -707,6 +720,8 @@ struct ata_link { struct ata_device device[ATA_MAX_DEVICES]; }; +#define ATA_LINK_CLEAR_BEGIN offsetof(struct ata_link, active_tag) +#define ATA_LINK_CLEAR_END offsetof(struct ata_link, device[0]) struct ata_port { struct Scsi_Host *scsi_host; /* our co-allocated scsi host */ @@ -752,6 +767,7 @@ struct ata_port { struct ata_port_stats stats; struct ata_host *host; struct device *dev; + struct device tdev; struct mutex scsi_scan_mutex; struct delayed_work hotplug_task; @@ -767,7 +783,7 @@ struct ata_port { pm_message_t pm_mesg; int *pm_result; - enum link_pm pm_policy; + enum ata_lpm_policy target_lpm_policy; struct timer_list fastdrain_timer; unsigned long fastdrain_cnt; @@ -833,8 +849,8 @@ struct ata_port_operations { int (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val); void (*pmp_attach)(struct ata_port *ap); void (*pmp_detach)(struct ata_port *ap); - int (*enable_pm)(struct ata_port *ap, enum link_pm policy); - void (*disable_pm)(struct ata_port *ap); + int (*set_lpm)(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); /* * Start, stop, suspend and resume @@ -946,6 +962,8 @@ extern int sata_link_debounce(struct ata_link *link, const unsigned long *params, unsigned long deadline); extern int sata_link_resume(struct ata_link *link, const unsigned long *params, unsigned long deadline); +extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, + bool spm_wakeup); extern int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, unsigned long deadline, bool *online, int (*check_ready)(struct ata_link *)); @@ -991,8 +1009,9 @@ extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg); extern void ata_host_resume(struct ata_host *host); #endif extern int ata_ratelimit(void); -extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, - unsigned long interval, unsigned long timeout); +extern void ata_msleep(struct ata_port *ap, unsigned int msecs); +extern u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, + u32 val, unsigned long interval, unsigned long timeout); extern int atapi_cmd_type(u8 opcode); extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis); diff --git a/include/linux/list.h b/include/linux/list.h index d167b5d7c0ac..88a000617d77 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -5,7 +5,6 @@ #include <linux/stddef.h> #include <linux/poison.h> #include <linux/prefetch.h> -#include <asm/system.h> /* * Simple doubly linked list implementation. diff --git a/include/linux/memblock.h b/include/linux/memblock.h index a59faf2b5edd..62a10c2a11f2 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -2,6 +2,7 @@ #define _LINUX_MEMBLOCK_H #ifdef __KERNEL__ +#ifdef CONFIG_HAVE_MEMBLOCK /* * Logical memory blocks. * @@ -16,73 +17,150 @@ #include <linux/init.h> #include <linux/mm.h> -#define MAX_MEMBLOCK_REGIONS 128 +#include <asm/memblock.h> -struct memblock_property { - u64 base; - u64 size; -}; +#define INIT_MEMBLOCK_REGIONS 128 +#define MEMBLOCK_ERROR 0 struct memblock_region { - unsigned long cnt; - u64 size; - struct memblock_property region[MAX_MEMBLOCK_REGIONS+1]; + phys_addr_t base; + phys_addr_t size; +}; + +struct memblock_type { + unsigned long cnt; /* number of regions */ + unsigned long max; /* size of the allocated array */ + struct memblock_region *regions; }; struct memblock { - unsigned long debug; - u64 rmo_size; - struct memblock_region memory; - struct memblock_region reserved; + phys_addr_t current_limit; + phys_addr_t memory_size; /* Updated by memblock_analyze() */ + struct memblock_type memory; + struct memblock_type reserved; }; extern struct memblock memblock; +extern int memblock_debug; +extern int memblock_can_resize; -extern void __init memblock_init(void); -extern void __init memblock_analyze(void); -extern long memblock_add(u64 base, u64 size); -extern long memblock_remove(u64 base, u64 size); -extern long __init memblock_free(u64 base, u64 size); -extern long __init memblock_reserve(u64 base, u64 size); -extern u64 __init memblock_alloc_nid(u64 size, u64 align, int nid, - u64 (*nid_range)(u64, u64, int *)); -extern u64 __init memblock_alloc(u64 size, u64 align); -extern u64 __init memblock_alloc_base(u64 size, - u64, u64 max_addr); -extern u64 __init __memblock_alloc_base(u64 size, - u64 align, u64 max_addr); -extern u64 __init memblock_phys_mem_size(void); -extern u64 memblock_end_of_DRAM(void); -extern void __init memblock_enforce_memory_limit(u64 memory_limit); -extern int __init memblock_is_reserved(u64 addr); -extern int memblock_is_region_reserved(u64 base, u64 size); -extern int memblock_find(struct memblock_property *res); +#define memblock_dbg(fmt, ...) \ + if (memblock_debug) printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) + +u64 memblock_find_in_range(u64 start, u64 end, u64 size, u64 align); +int memblock_free_reserved_regions(void); +int memblock_reserve_reserved_regions(void); + +extern void memblock_init(void); +extern void memblock_analyze(void); +extern long memblock_add(phys_addr_t base, phys_addr_t size); +extern long memblock_remove(phys_addr_t base, phys_addr_t size); +extern long memblock_free(phys_addr_t base, phys_addr_t size); +extern long memblock_reserve(phys_addr_t base, phys_addr_t size); + +/* The numa aware allocator is only available if + * CONFIG_ARCH_POPULATES_NODE_MAP is set + */ +extern phys_addr_t memblock_alloc_nid(phys_addr_t size, phys_addr_t align, + int nid); +extern phys_addr_t memblock_alloc_try_nid(phys_addr_t size, phys_addr_t align, + int nid); + +extern phys_addr_t memblock_alloc(phys_addr_t size, phys_addr_t align); + +/* Flags for memblock_alloc_base() amd __memblock_alloc_base() */ +#define MEMBLOCK_ALLOC_ANYWHERE (~(phys_addr_t)0) +#define MEMBLOCK_ALLOC_ACCESSIBLE 0 + +extern phys_addr_t memblock_alloc_base(phys_addr_t size, + phys_addr_t align, + phys_addr_t max_addr); +extern phys_addr_t __memblock_alloc_base(phys_addr_t size, + phys_addr_t align, + phys_addr_t max_addr); +extern phys_addr_t memblock_phys_mem_size(void); +extern phys_addr_t memblock_end_of_DRAM(void); +extern void memblock_enforce_memory_limit(phys_addr_t memory_limit); +extern int memblock_is_memory(phys_addr_t addr); +extern int memblock_is_region_memory(phys_addr_t base, phys_addr_t size); +extern int memblock_is_reserved(phys_addr_t addr); +extern int memblock_is_region_reserved(phys_addr_t base, phys_addr_t size); extern void memblock_dump_all(void); -static inline u64 -memblock_size_bytes(struct memblock_region *type, unsigned long region_nr) +/* Provided by the architecture */ +extern phys_addr_t memblock_nid_range(phys_addr_t start, phys_addr_t end, int *nid); +extern int memblock_memory_can_coalesce(phys_addr_t addr1, phys_addr_t size1, + phys_addr_t addr2, phys_addr_t size2); + +/** + * memblock_set_current_limit - Set the current allocation limit to allow + * limiting allocations to what is currently + * accessible during boot + * @limit: New limit value (physical address) + */ +extern void memblock_set_current_limit(phys_addr_t limit); + + +/* + * pfn conversion functions + * + * While the memory MEMBLOCKs should always be page aligned, the reserved + * MEMBLOCKs may not be. This accessor attempt to provide a very clear + * idea of what they return for such non aligned MEMBLOCKs. + */ + +/** + * memblock_region_memory_base_pfn - Return the lowest pfn intersecting with the memory region + * @reg: memblock_region structure + */ +static inline unsigned long memblock_region_memory_base_pfn(const struct memblock_region *reg) { - return type->region[region_nr].size; + return PFN_UP(reg->base); } -static inline u64 -memblock_size_pages(struct memblock_region *type, unsigned long region_nr) + +/** + * memblock_region_memory_end_pfn - Return the end_pfn this region + * @reg: memblock_region structure + */ +static inline unsigned long memblock_region_memory_end_pfn(const struct memblock_region *reg) { - return memblock_size_bytes(type, region_nr) >> PAGE_SHIFT; + return PFN_DOWN(reg->base + reg->size); } -static inline u64 -memblock_start_pfn(struct memblock_region *type, unsigned long region_nr) + +/** + * memblock_region_reserved_base_pfn - Return the lowest pfn intersecting with the reserved region + * @reg: memblock_region structure + */ +static inline unsigned long memblock_region_reserved_base_pfn(const struct memblock_region *reg) { - return type->region[region_nr].base >> PAGE_SHIFT; + return PFN_DOWN(reg->base); } -static inline u64 -memblock_end_pfn(struct memblock_region *type, unsigned long region_nr) + +/** + * memblock_region_reserved_end_pfn - Return the end_pfn this region + * @reg: memblock_region structure + */ +static inline unsigned long memblock_region_reserved_end_pfn(const struct memblock_region *reg) { - return memblock_start_pfn(type, region_nr) + - memblock_size_pages(type, region_nr); + return PFN_UP(reg->base + reg->size); } -#include <asm/memblock.h> +#define for_each_memblock(memblock_type, region) \ + for (region = memblock.memblock_type.regions; \ + region < (memblock.memblock_type.regions + memblock.memblock_type.cnt); \ + region++) + + +#ifdef ARCH_DISCARD_MEMBLOCK +#define __init_memblock __init +#define __initdata_memblock __initdata +#else +#define __init_memblock +#define __initdata_memblock +#endif + +#endif /* CONFIG_HAVE_MEMBLOCK */ #endif /* __KERNEL__ */ diff --git a/include/linux/mfd/tc35892.h b/include/linux/mfd/tc35892.h index e47f770d3068..eff3094ca84e 100644 --- a/include/linux/mfd/tc35892.h +++ b/include/linux/mfd/tc35892.h @@ -111,9 +111,13 @@ extern int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val); * struct tc35892_gpio_platform_data - TC35892 GPIO platform data * @gpio_base: first gpio number assigned to TC35892. A maximum of * %TC35892_NR_GPIOS GPIOs will be allocated. + * @setup: callback for board-specific initialization + * @remove: callback for board-specific teardown */ struct tc35892_gpio_platform_data { int gpio_base; + void (*setup)(struct tc35892 *tc35892, unsigned gpio_base); + void (*remove)(struct tc35892 *tc35892, unsigned gpio_base); }; /** diff --git a/include/linux/mm.h b/include/linux/mm.h index 74949fbef8c6..7687228dd3b7 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1175,6 +1175,8 @@ extern void free_bootmem_with_active_regions(int nid, unsigned long max_low_pfn); int add_from_early_node_map(struct range *range, int az, int nr_range, int nid); +u64 __init find_memory_core_early(int nid, u64 size, u64 align, + u64 goal, u64 limit); void *__alloc_memory_core_early(int nodeid, u64 size, u64 align, u64 goal, u64 limit); typedef int (*work_fn_t)(unsigned long, unsigned long, void *); diff --git a/include/linux/opp.h b/include/linux/opp.h new file mode 100644 index 000000000000..5449945d589f --- /dev/null +++ b/include/linux/opp.h @@ -0,0 +1,105 @@ +/* + * Generic OPP Interface + * + * Copyright (C) 2009-2010 Texas Instruments Incorporated. + * Nishanth Menon + * Romit Dasgupta + * Kevin Hilman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_OPP_H__ +#define __LINUX_OPP_H__ + +#include <linux/err.h> +#include <linux/cpufreq.h> + +struct opp; + +#if defined(CONFIG_PM_OPP) + +unsigned long opp_get_voltage(struct opp *opp); + +unsigned long opp_get_freq(struct opp *opp); + +int opp_get_opp_count(struct device *dev); + +struct opp *opp_find_freq_exact(struct device *dev, unsigned long freq, + bool available); + +struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq); + +struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq); + +int opp_add(struct device *dev, unsigned long freq, unsigned long u_volt); + +int opp_enable(struct device *dev, unsigned long freq); + +int opp_disable(struct device *dev, unsigned long freq); + +#else +static inline unsigned long opp_get_voltage(struct opp *opp) +{ + return 0; +} + +static inline unsigned long opp_get_freq(struct opp *opp) +{ + return 0; +} + +static inline int opp_get_opp_count(struct device *dev) +{ + return 0; +} + +static inline struct opp *opp_find_freq_exact(struct device *dev, + unsigned long freq, bool available) +{ + return ERR_PTR(-EINVAL); +} + +static inline struct opp *opp_find_freq_floor(struct device *dev, + unsigned long *freq) +{ + return ERR_PTR(-EINVAL); +} + +static inline struct opp *opp_find_freq_ceil(struct device *dev, + unsigned long *freq) +{ + return ERR_PTR(-EINVAL); +} + +static inline int opp_add(struct device *dev, unsigned long freq, + unsigned long u_volt) +{ + return -EINVAL; +} + +static inline int opp_enable(struct device *dev, unsigned long freq) +{ + return 0; +} + +static inline int opp_disable(struct device *dev, unsigned long freq) +{ + return 0; +} +#endif /* CONFIG_PM */ + +#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP) +int opp_init_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **table); +#else +static inline int opp_init_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **table) +{ + return -EINVAL; +} +#endif /* CONFIG_CPU_FREQ */ + +#endif /* __LINUX_OPP_H__ */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 2615c37c8fe5..dad30734432a 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2316,6 +2316,14 @@ #define PCI_DEVICE_ID_P4080 0x0401 #define PCI_DEVICE_ID_P4040E 0x0408 #define PCI_DEVICE_ID_P4040 0x0409 +#define PCI_DEVICE_ID_P2040E 0x0410 +#define PCI_DEVICE_ID_P2040 0x0411 +#define PCI_DEVICE_ID_P3041E 0x041E +#define PCI_DEVICE_ID_P3041 0x041F +#define PCI_DEVICE_ID_P5020E 0x0420 +#define PCI_DEVICE_ID_P5020 0x0421 +#define PCI_DEVICE_ID_P5010E 0x0428 +#define PCI_DEVICE_ID_P5010 0x0429 #define PCI_DEVICE_ID_MPC8641 0x7010 #define PCI_DEVICE_ID_MPC8641D 0x7011 #define PCI_DEVICE_ID_MPC8610 0x7018 diff --git a/include/linux/pm.h b/include/linux/pm.h index 52e8c55ff314..40f3f45702ba 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -41,6 +41,12 @@ extern void (*pm_power_off_prepare)(void); struct device; +#ifdef CONFIG_PM +extern const char power_group_name[]; /* = "power" */ +#else +#define power_group_name NULL +#endif + typedef struct pm_message { int event; } pm_message_t; @@ -438,6 +444,9 @@ enum rpm_status { * * RPM_REQ_SUSPEND Run the device bus type's ->runtime_suspend() callback * + * RPM_REQ_AUTOSUSPEND Same as RPM_REQ_SUSPEND, but not until the device has + * been inactive for as long as power.autosuspend_delay + * * RPM_REQ_RESUME Run the device bus type's ->runtime_resume() callback */ @@ -445,26 +454,28 @@ enum rpm_request { RPM_REQ_NONE = 0, RPM_REQ_IDLE, RPM_REQ_SUSPEND, + RPM_REQ_AUTOSUSPEND, RPM_REQ_RESUME, }; +struct wakeup_source; + struct dev_pm_info { pm_message_t power_state; unsigned int can_wakeup:1; - unsigned int should_wakeup:1; unsigned async_suspend:1; enum dpm_state status; /* Owned by the PM core */ + spinlock_t lock; #ifdef CONFIG_PM_SLEEP struct list_head entry; struct completion completion; - unsigned long wakeup_count; + struct wakeup_source *wakeup; #endif #ifdef CONFIG_PM_RUNTIME struct timer_list suspend_timer; unsigned long timer_expires; struct work_struct work; wait_queue_head_t wait_queue; - spinlock_t lock; atomic_t usage_count; atomic_t child_count; unsigned int disable_depth:3; @@ -474,9 +485,14 @@ struct dev_pm_info { unsigned int deferred_resume:1; unsigned int run_wake:1; unsigned int runtime_auto:1; + unsigned int no_callbacks:1; + unsigned int use_autosuspend:1; + unsigned int timer_autosuspends:1; enum rpm_request request; enum rpm_status runtime_status; int runtime_error; + int autosuspend_delay; + unsigned long last_busy; unsigned long active_jiffies; unsigned long suspended_jiffies; unsigned long accounting_timestamp; @@ -558,12 +574,7 @@ extern void __suspend_report_result(const char *function, void *fn, int ret); __suspend_report_result(__func__, fn, ret); \ } while (0) -extern void device_pm_wait_for_dev(struct device *sub, struct device *dev); - -/* drivers/base/power/wakeup.c */ -extern void pm_wakeup_event(struct device *dev, unsigned int msec); -extern void pm_stay_awake(struct device *dev); -extern void pm_relax(void); +extern int device_pm_wait_for_dev(struct device *sub, struct device *dev); #else /* !CONFIG_PM_SLEEP */ #define device_pm_lock() do {} while (0) @@ -576,11 +587,10 @@ static inline int dpm_suspend_start(pm_message_t state) #define suspend_report_result(fn, ret) do {} while (0) -static inline void device_pm_wait_for_dev(struct device *a, struct device *b) {} - -static inline void pm_wakeup_event(struct device *dev, unsigned int msec) {} -static inline void pm_stay_awake(struct device *dev) {} -static inline void pm_relax(void) {} +static inline int device_pm_wait_for_dev(struct device *a, struct device *b) +{ + return 0; +} #endif /* !CONFIG_PM_SLEEP */ /* How to reorder dpm_list after device_move() */ diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index 6e81888c6222..3ec2358f8692 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -12,18 +12,24 @@ #include <linux/device.h> #include <linux/pm.h> +#include <linux/jiffies.h> + +/* Runtime PM flag argument bits */ +#define RPM_ASYNC 0x01 /* Request is asynchronous */ +#define RPM_NOWAIT 0x02 /* Don't wait for concurrent + state change */ +#define RPM_GET_PUT 0x04 /* Increment/decrement the + usage_count */ +#define RPM_AUTO 0x08 /* Use autosuspend_delay */ + #ifdef CONFIG_PM_RUNTIME extern struct workqueue_struct *pm_wq; -extern int pm_runtime_idle(struct device *dev); -extern int pm_runtime_suspend(struct device *dev); -extern int pm_runtime_resume(struct device *dev); -extern int pm_request_idle(struct device *dev); +extern int __pm_runtime_idle(struct device *dev, int rpmflags); +extern int __pm_runtime_suspend(struct device *dev, int rpmflags); +extern int __pm_runtime_resume(struct device *dev, int rpmflags); extern int pm_schedule_suspend(struct device *dev, unsigned int delay); -extern int pm_request_resume(struct device *dev); -extern int __pm_runtime_get(struct device *dev, bool sync); -extern int __pm_runtime_put(struct device *dev, bool sync); extern int __pm_runtime_set_status(struct device *dev, unsigned int status); extern int pm_runtime_barrier(struct device *dev); extern void pm_runtime_enable(struct device *dev); @@ -33,6 +39,10 @@ extern void pm_runtime_forbid(struct device *dev); extern int pm_generic_runtime_idle(struct device *dev); extern int pm_generic_runtime_suspend(struct device *dev); extern int pm_generic_runtime_resume(struct device *dev); +extern void pm_runtime_no_callbacks(struct device *dev); +extern void __pm_runtime_use_autosuspend(struct device *dev, bool use); +extern void pm_runtime_set_autosuspend_delay(struct device *dev, int delay); +extern unsigned long pm_runtime_autosuspend_expiration(struct device *dev); static inline bool pm_children_suspended(struct device *dev) { @@ -70,19 +80,29 @@ static inline bool pm_runtime_suspended(struct device *dev) return dev->power.runtime_status == RPM_SUSPENDED; } +static inline void pm_runtime_mark_last_busy(struct device *dev) +{ + ACCESS_ONCE(dev->power.last_busy) = jiffies; +} + #else /* !CONFIG_PM_RUNTIME */ -static inline int pm_runtime_idle(struct device *dev) { return -ENOSYS; } -static inline int pm_runtime_suspend(struct device *dev) { return -ENOSYS; } -static inline int pm_runtime_resume(struct device *dev) { return 0; } -static inline int pm_request_idle(struct device *dev) { return -ENOSYS; } +static inline int __pm_runtime_idle(struct device *dev, int rpmflags) +{ + return -ENOSYS; +} +static inline int __pm_runtime_suspend(struct device *dev, int rpmflags) +{ + return -ENOSYS; +} +static inline int __pm_runtime_resume(struct device *dev, int rpmflags) +{ + return 1; +} static inline int pm_schedule_suspend(struct device *dev, unsigned int delay) { return -ENOSYS; } -static inline int pm_request_resume(struct device *dev) { return 0; } -static inline int __pm_runtime_get(struct device *dev, bool sync) { return 1; } -static inline int __pm_runtime_put(struct device *dev, bool sync) { return 0; } static inline int __pm_runtime_set_status(struct device *dev, unsigned int status) { return 0; } static inline int pm_runtime_barrier(struct device *dev) { return 0; } @@ -102,27 +122,82 @@ static inline bool pm_runtime_suspended(struct device *dev) { return false; } static inline int pm_generic_runtime_idle(struct device *dev) { return 0; } static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; } static inline int pm_generic_runtime_resume(struct device *dev) { return 0; } +static inline void pm_runtime_no_callbacks(struct device *dev) {} + +static inline void pm_runtime_mark_last_busy(struct device *dev) {} +static inline void __pm_runtime_use_autosuspend(struct device *dev, + bool use) {} +static inline void pm_runtime_set_autosuspend_delay(struct device *dev, + int delay) {} +static inline unsigned long pm_runtime_autosuspend_expiration( + struct device *dev) { return 0; } #endif /* !CONFIG_PM_RUNTIME */ +static inline int pm_runtime_idle(struct device *dev) +{ + return __pm_runtime_idle(dev, 0); +} + +static inline int pm_runtime_suspend(struct device *dev) +{ + return __pm_runtime_suspend(dev, 0); +} + +static inline int pm_runtime_autosuspend(struct device *dev) +{ + return __pm_runtime_suspend(dev, RPM_AUTO); +} + +static inline int pm_runtime_resume(struct device *dev) +{ + return __pm_runtime_resume(dev, 0); +} + +static inline int pm_request_idle(struct device *dev) +{ + return __pm_runtime_idle(dev, RPM_ASYNC); +} + +static inline int pm_request_resume(struct device *dev) +{ + return __pm_runtime_resume(dev, RPM_ASYNC); +} + +static inline int pm_request_autosuspend(struct device *dev) +{ + return __pm_runtime_suspend(dev, RPM_ASYNC | RPM_AUTO); +} + static inline int pm_runtime_get(struct device *dev) { - return __pm_runtime_get(dev, false); + return __pm_runtime_resume(dev, RPM_GET_PUT | RPM_ASYNC); } static inline int pm_runtime_get_sync(struct device *dev) { - return __pm_runtime_get(dev, true); + return __pm_runtime_resume(dev, RPM_GET_PUT); } static inline int pm_runtime_put(struct device *dev) { - return __pm_runtime_put(dev, false); + return __pm_runtime_idle(dev, RPM_GET_PUT | RPM_ASYNC); +} + +static inline int pm_runtime_put_autosuspend(struct device *dev) +{ + return __pm_runtime_suspend(dev, + RPM_GET_PUT | RPM_ASYNC | RPM_AUTO); } static inline int pm_runtime_put_sync(struct device *dev) { - return __pm_runtime_put(dev, true); + return __pm_runtime_idle(dev, RPM_GET_PUT); +} + +static inline int pm_runtime_put_sync_autosuspend(struct device *dev) +{ + return __pm_runtime_suspend(dev, RPM_GET_PUT | RPM_AUTO); } static inline int pm_runtime_set_active(struct device *dev) @@ -140,4 +215,14 @@ static inline void pm_runtime_disable(struct device *dev) __pm_runtime_disable(dev, true); } +static inline void pm_runtime_use_autosuspend(struct device *dev) +{ + __pm_runtime_use_autosuspend(dev, true); +} + +static inline void pm_runtime_dont_use_autosuspend(struct device *dev) +{ + __pm_runtime_use_autosuspend(dev, false); +} + #endif diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h index 76aca48722ae..9cff00dd6b63 100644 --- a/include/linux/pm_wakeup.h +++ b/include/linux/pm_wakeup.h @@ -2,6 +2,7 @@ * pm_wakeup.h - Power management wakeup interface * * Copyright (C) 2008 Alan Stern + * Copyright (C) 2010 Rafael J. Wysocki, Novell Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,19 +28,77 @@ #include <linux/types.h> -#ifdef CONFIG_PM - -/* Changes to device_may_wakeup take effect on the next pm state change. +/** + * struct wakeup_source - Representation of wakeup sources * - * By default, most devices should leave wakeup disabled. The exceptions - * are devices that everyone expects to be wakeup sources: keyboards, - * power buttons, possibly network interfaces, etc. + * @total_time: Total time this wakeup source has been active. + * @max_time: Maximum time this wakeup source has been continuously active. + * @last_time: Monotonic clock when the wakeup source's was activated last time. + * @event_count: Number of signaled wakeup events. + * @active_count: Number of times the wakeup sorce was activated. + * @relax_count: Number of times the wakeup sorce was deactivated. + * @hit_count: Number of times the wakeup sorce might abort system suspend. + * @active: Status of the wakeup source. */ -static inline void device_init_wakeup(struct device *dev, bool val) +struct wakeup_source { + char *name; + struct list_head entry; + spinlock_t lock; + struct timer_list timer; + unsigned long timer_expires; + ktime_t total_time; + ktime_t max_time; + ktime_t last_time; + unsigned long event_count; + unsigned long active_count; + unsigned long relax_count; + unsigned long hit_count; + unsigned int active:1; +}; + +#ifdef CONFIG_PM_SLEEP + +/* + * Changes to device_may_wakeup take effect on the next pm state change. + */ + +static inline void device_set_wakeup_capable(struct device *dev, bool capable) +{ + dev->power.can_wakeup = capable; +} + +static inline bool device_can_wakeup(struct device *dev) +{ + return dev->power.can_wakeup; +} + + + +static inline bool device_may_wakeup(struct device *dev) { - dev->power.can_wakeup = dev->power.should_wakeup = val; + return dev->power.can_wakeup && !!dev->power.wakeup; } +/* drivers/base/power/wakeup.c */ +extern struct wakeup_source *wakeup_source_create(const char *name); +extern void wakeup_source_destroy(struct wakeup_source *ws); +extern void wakeup_source_add(struct wakeup_source *ws); +extern void wakeup_source_remove(struct wakeup_source *ws); +extern struct wakeup_source *wakeup_source_register(const char *name); +extern void wakeup_source_unregister(struct wakeup_source *ws); +extern int device_wakeup_enable(struct device *dev); +extern int device_wakeup_disable(struct device *dev); +extern int device_init_wakeup(struct device *dev, bool val); +extern int device_set_wakeup_enable(struct device *dev, bool enable); +extern void __pm_stay_awake(struct wakeup_source *ws); +extern void pm_stay_awake(struct device *dev); +extern void __pm_relax(struct wakeup_source *ws); +extern void pm_relax(struct device *dev); +extern void __pm_wakeup_event(struct wakeup_source *ws, unsigned int msec); +extern void pm_wakeup_event(struct device *dev, unsigned int msec); + +#else /* !CONFIG_PM_SLEEP */ + static inline void device_set_wakeup_capable(struct device *dev, bool capable) { dev->power.can_wakeup = capable; @@ -50,43 +109,63 @@ static inline bool device_can_wakeup(struct device *dev) return dev->power.can_wakeup; } -static inline void device_set_wakeup_enable(struct device *dev, bool enable) +static inline bool device_may_wakeup(struct device *dev) { - dev->power.should_wakeup = enable; + return false; } -static inline bool device_may_wakeup(struct device *dev) +static inline struct wakeup_source *wakeup_source_create(const char *name) { - return dev->power.can_wakeup && dev->power.should_wakeup; + return NULL; } -#else /* !CONFIG_PM */ +static inline void wakeup_source_destroy(struct wakeup_source *ws) {} + +static inline void wakeup_source_add(struct wakeup_source *ws) {} -/* For some reason the following routines work even without CONFIG_PM */ -static inline void device_init_wakeup(struct device *dev, bool val) +static inline void wakeup_source_remove(struct wakeup_source *ws) {} + +static inline struct wakeup_source *wakeup_source_register(const char *name) { - dev->power.can_wakeup = val; + return NULL; } -static inline void device_set_wakeup_capable(struct device *dev, bool capable) +static inline void wakeup_source_unregister(struct wakeup_source *ws) {} + +static inline int device_wakeup_enable(struct device *dev) { - dev->power.can_wakeup = capable; + return -EINVAL; } -static inline bool device_can_wakeup(struct device *dev) +static inline int device_wakeup_disable(struct device *dev) { - return dev->power.can_wakeup; + return 0; } -static inline void device_set_wakeup_enable(struct device *dev, bool enable) +static inline int device_init_wakeup(struct device *dev, bool val) { + dev->power.can_wakeup = val; + return val ? -EINVAL : 0; } -static inline bool device_may_wakeup(struct device *dev) + +static inline int device_set_wakeup_enable(struct device *dev, bool enable) { - return false; + return -EINVAL; } -#endif /* !CONFIG_PM */ +static inline void __pm_stay_awake(struct wakeup_source *ws) {} + +static inline void pm_stay_awake(struct device *dev) {} + +static inline void __pm_relax(struct wakeup_source *ws) {} + +static inline void pm_relax(struct device *dev) {} + +static inline void __pm_wakeup_event(struct wakeup_source *ws, unsigned int msec) {} + +static inline void pm_wakeup_event(struct device *dev, unsigned int msec) {} + +#endif /* !CONFIG_PM_SLEEP */ #endif /* _LINUX_PM_WAKEUP_H */ diff --git a/include/linux/resume-trace.h b/include/linux/resume-trace.h index bc8c3881c729..f31db2368782 100644 --- a/include/linux/resume-trace.h +++ b/include/linux/resume-trace.h @@ -3,6 +3,7 @@ #ifdef CONFIG_PM_TRACE #include <asm/resume-trace.h> +#include <linux/types.h> extern int pm_trace_enabled; @@ -14,6 +15,7 @@ static inline int pm_trace_is_enabled(void) struct device; extern void set_trace_device(struct device *); extern void generate_resume_trace(const void *tracedata, unsigned int user); +extern int show_trace_dev_match(char *buf, size_t size); #define TRACE_DEVICE(dev) do { \ if (pm_trace_enabled) \ diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index f8854655860e..80e535897de6 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -50,6 +50,7 @@ #include <linux/preempt.h> #include <linux/linkage.h> #include <linux/compiler.h> +#include <linux/irqflags.h> #include <linux/thread_info.h> #include <linux/kernel.h> #include <linux/stringify.h> diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 4af270ec2204..26697514c5ec 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -293,8 +293,8 @@ extern int unregister_pm_notifier(struct notifier_block *nb); extern bool events_check_enabled; extern bool pm_check_wakeup_events(void); -extern bool pm_get_wakeup_count(unsigned long *count); -extern bool pm_save_wakeup_count(unsigned long count); +extern bool pm_get_wakeup_count(unsigned int *count); +extern bool pm_save_wakeup_count(unsigned int count); #else /* !CONFIG_PM_SLEEP */ static inline int register_pm_notifier(struct notifier_block *nb) @@ -308,6 +308,8 @@ static inline int unregister_pm_notifier(struct notifier_block *nb) } #define pm_notifier(fn, pri) do { (void)(fn); } while (0) + +static inline bool pm_check_wakeup_events(void) { return true; } #endif /* !CONFIG_PM_SLEEP */ extern struct mutex pm_mutex; diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 96eb576d82fd..30b881555fa5 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -164,6 +164,10 @@ int sysfs_add_file_to_group(struct kobject *kobj, const struct attribute *attr, const char *group); void sysfs_remove_file_from_group(struct kobject *kobj, const struct attribute *attr, const char *group); +int sysfs_merge_group(struct kobject *kobj, + const struct attribute_group *grp); +void sysfs_unmerge_group(struct kobject *kobj, + const struct attribute_group *grp); void sysfs_notify(struct kobject *kobj, const char *dir, const char *attr); void sysfs_notify_dirent(struct sysfs_dirent *sd); @@ -302,6 +306,17 @@ static inline void sysfs_remove_file_from_group(struct kobject *kobj, { } +static inline int sysfs_merge_group(struct kobject *kobj, + const struct attribute_group *grp) +{ + return 0; +} + +static inline void sysfs_unmerge_group(struct kobject *kobj, + const struct attribute_group *grp) +{ +} + static inline void sysfs_notify(struct kobject *kobj, const char *dir, const char *attr) { diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h deleted file mode 100644 index 68d8bde7e8d6..000000000000 --- a/include/pcmcia/cs.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * cs.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * The initial developer of the original code is David A. Hinds - * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds - * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - * - * (C) 1999 David A. Hinds - */ - -#ifndef _LINUX_CS_H -#define _LINUX_CS_H - -#ifdef __KERNEL__ -#include <linux/interrupt.h> -#endif - -/* ModifyConfiguration */ -typedef struct modconf_t { - u_int Attributes; - u_int Vcc, Vpp1, Vpp2; -} modconf_t; - -/* Attributes for ModifyConfiguration */ -#define CONF_IRQ_CHANGE_VALID 0x0100 -#define CONF_VCC_CHANGE_VALID 0x0200 -#define CONF_VPP1_CHANGE_VALID 0x0400 -#define CONF_VPP2_CHANGE_VALID 0x0800 -#define CONF_IO_CHANGE_WIDTH 0x1000 - -/* For RequestConfiguration */ -typedef struct config_req_t { - u_int Attributes; - u_int Vpp; /* both Vpp1 and Vpp2 */ - u_int IntType; - u_int ConfigBase; - u_char Status, Pin, Copy, ExtStatus; - u_char ConfigIndex; - u_int Present; -} config_req_t; - -/* Attributes for RequestConfiguration */ -#define CONF_ENABLE_IRQ 0x01 -#define CONF_ENABLE_DMA 0x02 -#define CONF_ENABLE_SPKR 0x04 -#define CONF_ENABLE_PULSE_IRQ 0x08 -#define CONF_VALID_CLIENT 0x100 - -/* IntType field */ -#define INT_MEMORY 0x01 -#define INT_MEMORY_AND_IO 0x02 -#define INT_CARDBUS 0x04 -#define INT_ZOOMED_VIDEO 0x08 - -/* Configuration registers present */ -#define PRESENT_OPTION 0x001 -#define PRESENT_STATUS 0x002 -#define PRESENT_PIN_REPLACE 0x004 -#define PRESENT_COPY 0x008 -#define PRESENT_EXT_STATUS 0x010 -#define PRESENT_IOBASE_0 0x020 -#define PRESENT_IOBASE_1 0x040 -#define PRESENT_IOBASE_2 0x080 -#define PRESENT_IOBASE_3 0x100 -#define PRESENT_IOSIZE 0x200 - -/* For RequestWindow */ -typedef struct win_req_t { - u_int Attributes; - u_long Base; - u_int Size; - u_int AccessSpeed; -} win_req_t; - -/* Attributes for RequestWindow */ -#define WIN_MEMORY_TYPE_CM 0x00 /* default */ -#define WIN_MEMORY_TYPE_AM 0x20 /* MAP_ATTRIB */ -#define WIN_DATA_WIDTH_8 0x00 /* default */ -#define WIN_DATA_WIDTH_16 0x02 /* MAP_16BIT */ -#define WIN_ENABLE 0x01 /* MAP_ACTIVE */ -#define WIN_USE_WAIT 0x40 /* MAP_USE_WAIT */ - -#define WIN_FLAGS_MAP 0x63 /* MAP_ATTRIB | MAP_16BIT | MAP_ACTIVE | - MAP_USE_WAIT */ -#define WIN_FLAGS_REQ 0x1c /* mapping to socket->win[i]: - 0x04 -> 0 - 0x08 -> 1 - 0x0c -> 2 - 0x10 -> 3 */ - -#endif /* _LINUX_CS_H */ diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 70c58ed2278c..d830c87ff0a7 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -24,9 +24,11 @@ #ifdef __KERNEL__ #include <linux/device.h> +#include <linux/interrupt.h> #include <pcmcia/ss.h> #include <asm/atomic.h> + /* * PCMCIA device drivers (16-bit cards only; 32-bit cards require CardBus * a.k.a. PCI drivers @@ -36,8 +38,6 @@ struct pcmcia_device; struct config_t; struct net_device; -typedef struct resource *window_handle_t; - /* dynamic device IDs for PCMCIA device drivers. See * Documentation/pcmcia/driver.txt for details. */ @@ -47,6 +47,8 @@ struct pcmcia_dynids { }; struct pcmcia_driver { + const char *name; + int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); @@ -90,15 +92,17 @@ struct pcmcia_device { struct list_head socket_device_list; - /* deprecated, will be cleaned up soon */ - config_req_t conf; - window_handle_t win; - /* device setup */ unsigned int irq; struct resource *resource[PCMCIA_NUM_RESOURCES]; + resource_size_t card_addr; /* for the 1st IOMEM resource */ + unsigned int vpp; - unsigned int io_lines; /* number of I/O lines */ + unsigned int config_flags; /* CONF_ENABLE_ flags below */ + unsigned int config_base; + unsigned int config_index; + unsigned int config_regs; /* PRESENT_ flags below */ + unsigned int io_lines; /* number of I/O lines */ /* Is the device suspended? */ u16 suspended:1; @@ -174,9 +178,6 @@ int pcmcia_parse_tuple(tuple_t *tuple, cisparse_t *parse); /* loop CIS entries for valid configuration */ int pcmcia_loop_config(struct pcmcia_device *p_dev, int (*conf_check) (struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data), void *priv_data); @@ -206,16 +207,17 @@ pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev, irq_handler_t handler); -int pcmcia_request_configuration(struct pcmcia_device *p_dev, - config_req_t *req); +int pcmcia_enable_device(struct pcmcia_device *p_dev); -int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, - window_handle_t *wh); -int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t win); -int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t win, +int pcmcia_request_window(struct pcmcia_device *p_dev, struct resource *res, + unsigned int speed); +int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res); +int pcmcia_map_mem_page(struct pcmcia_device *p_dev, struct resource *res, unsigned int offset); -int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod); +int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp); +int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev); + void pcmcia_disable_device(struct pcmcia_device *p_dev); /* IO ports */ @@ -224,15 +226,46 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev); #define IO_DATA_PATH_WIDTH_16 0x08 #define IO_DATA_PATH_WIDTH_AUTO 0x10 -/* convert flag found in cfgtable to data path width parameter */ -static inline int pcmcia_io_cfg_data_width(unsigned int flags) -{ - if (!(flags & CISTPL_IO_8BIT)) - return IO_DATA_PATH_WIDTH_16; - if (!(flags & CISTPL_IO_16BIT)) - return IO_DATA_PATH_WIDTH_8; - return IO_DATA_PATH_WIDTH_AUTO; -} +/* IO memory */ +#define WIN_MEMORY_TYPE_CM 0x00 /* default */ +#define WIN_MEMORY_TYPE_AM 0x20 /* MAP_ATTRIB */ +#define WIN_DATA_WIDTH_8 0x00 /* default */ +#define WIN_DATA_WIDTH_16 0x02 /* MAP_16BIT */ +#define WIN_ENABLE 0x01 /* MAP_ACTIVE */ +#define WIN_USE_WAIT 0x40 /* MAP_USE_WAIT */ + +#define WIN_FLAGS_MAP 0x63 /* MAP_ATTRIB | MAP_16BIT | MAP_ACTIVE | + MAP_USE_WAIT */ +#define WIN_FLAGS_REQ 0x1c /* mapping to socket->win[i]: + 0x04 -> 0 + 0x08 -> 1 + 0x0c -> 2 + 0x10 -> 3 */ + +/* config_reg{ister}s present for this PCMCIA device */ +#define PRESENT_OPTION 0x001 +#define PRESENT_STATUS 0x002 +#define PRESENT_PIN_REPLACE 0x004 +#define PRESENT_COPY 0x008 +#define PRESENT_EXT_STATUS 0x010 +#define PRESENT_IOBASE_0 0x020 +#define PRESENT_IOBASE_1 0x040 +#define PRESENT_IOBASE_2 0x080 +#define PRESENT_IOBASE_3 0x100 +#define PRESENT_IOSIZE 0x200 + +/* flags to be passed to pcmcia_enable_device() */ +#define CONF_ENABLE_IRQ 0x0001 +#define CONF_ENABLE_SPKR 0x0002 +#define CONF_ENABLE_PULSE_IRQ 0x0004 +#define CONF_ENABLE_ESR 0x0008 + +/* flags used by pcmcia_loop_config() autoconfiguration */ +#define CONF_AUTO_CHECK_VCC 0x0100 /* check for matching Vcc? */ +#define CONF_AUTO_SET_VPP 0x0200 /* set Vpp? */ +#define CONF_AUTO_AUDIO 0x0400 /* enable audio line? */ +#define CONF_AUTO_SET_IO 0x0800 /* set ->resource[0,1] */ +#define CONF_AUTO_SET_IOMEM 0x1000 /* set ->resource[2] */ #endif /* __KERNEL__ */ diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h index 626b63c33d9e..731cde010f42 100644 --- a/include/pcmcia/ss.h +++ b/include/pcmcia/ss.h @@ -19,7 +19,6 @@ #include <linux/sched.h> /* task_struct, completion */ #include <linux/mutex.h> -#include <pcmcia/cs.h> #ifdef CONFIG_CARDBUS #include <linux/pci.h> #endif diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h index 6fa7cbab7d93..1c09820df585 100644 --- a/include/trace/events/irq.h +++ b/include/trace/events/irq.h @@ -86,76 +86,62 @@ TRACE_EVENT(irq_handler_exit, DECLARE_EVENT_CLASS(softirq, - TP_PROTO(struct softirq_action *h, struct softirq_action *vec), + TP_PROTO(unsigned int vec_nr), - TP_ARGS(h, vec), + TP_ARGS(vec_nr), TP_STRUCT__entry( - __field( int, vec ) + __field( unsigned int, vec ) ), TP_fast_assign( - if (vec) - __entry->vec = (int)(h - vec); - else - __entry->vec = (int)(long)h; + __entry->vec = vec_nr; ), - TP_printk("vec=%d [action=%s]", __entry->vec, + TP_printk("vec=%u [action=%s]", __entry->vec, show_softirq_name(__entry->vec)) ); /** * softirq_entry - called immediately before the softirq handler - * @h: pointer to struct softirq_action - * @vec: pointer to first struct softirq_action in softirq_vec array + * @vec_nr: softirq vector number * - * The @h parameter, contains a pointer to the struct softirq_action - * which has a pointer to the action handler that is called. By subtracting - * the @vec pointer from the @h pointer, we can determine the softirq - * number. Also, when used in combination with the softirq_exit tracepoint - * we can determine the softirq latency. + * When used in combination with the softirq_exit tracepoint + * we can determine the softirq handler runtine. */ DEFINE_EVENT(softirq, softirq_entry, - TP_PROTO(struct softirq_action *h, struct softirq_action *vec), + TP_PROTO(unsigned int vec_nr), - TP_ARGS(h, vec) + TP_ARGS(vec_nr) ); /** * softirq_exit - called immediately after the softirq handler returns - * @h: pointer to struct softirq_action - * @vec: pointer to first struct softirq_action in softirq_vec array + * @vec_nr: softirq vector number * - * The @h parameter contains a pointer to the struct softirq_action - * that has handled the softirq. By subtracting the @vec pointer from - * the @h pointer, we can determine the softirq number. Also, when used in - * combination with the softirq_entry tracepoint we can determine the softirq - * latency. + * When used in combination with the softirq_entry tracepoint + * we can determine the softirq handler runtine. */ DEFINE_EVENT(softirq, softirq_exit, - TP_PROTO(struct softirq_action *h, struct softirq_action *vec), + TP_PROTO(unsigned int vec_nr), - TP_ARGS(h, vec) + TP_ARGS(vec_nr) ); /** * softirq_raise - called immediately when a softirq is raised - * @h: pointer to struct softirq_action - * @vec: pointer to first struct softirq_action in softirq_vec array + * @vec_nr: softirq vector number * - * The @h parameter contains a pointer to the softirq vector number which is - * raised. @vec is NULL and it means @h includes vector number not - * softirq_action. When used in combination with the softirq_entry tracepoint - * we can determine the softirq raise latency. + * When used in combination with the softirq_entry tracepoint + * we can determine the softirq raise to run latency. */ DEFINE_EVENT(softirq, softirq_raise, - TP_PROTO(struct softirq_action *h, struct softirq_action *vec), + TP_PROTO(unsigned int vec_nr), - TP_ARGS(h, vec) + TP_ARGS(vec_nr) ); #endif /* _TRACE_IRQ_H */ diff --git a/kernel/Makefile b/kernel/Makefile index e2c9d52cfe9e..0b5ff083fa22 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -11,7 +11,6 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \ async.o range.o jump_label.o -obj-$(CONFIG_HAVE_EARLY_RES) += early_res.o obj-y += groups.o ifdef CONFIG_FUNCTION_TRACER diff --git a/kernel/early_res.c b/kernel/early_res.c deleted file mode 100644 index 7bfae887f211..000000000000 --- a/kernel/early_res.c +++ /dev/null @@ -1,590 +0,0 @@ -/* - * early_res, could be used to replace bootmem - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/mm.h> -#include <linux/early_res.h> -#include <linux/slab.h> -#include <linux/kmemleak.h> - -/* - * Early reserved memory areas. - */ -/* - * need to make sure this one is bigger enough before - * find_fw_memmap_area could be used - */ -#define MAX_EARLY_RES_X 32 - -struct early_res { - u64 start, end; - char name[15]; - char overlap_ok; -}; -static struct early_res early_res_x[MAX_EARLY_RES_X] __initdata; - -static int max_early_res __initdata = MAX_EARLY_RES_X; -static struct early_res *early_res __initdata = &early_res_x[0]; -static int early_res_count __initdata; - -static int __init find_overlapped_early(u64 start, u64 end) -{ - int i; - struct early_res *r; - - for (i = 0; i < max_early_res && early_res[i].end; i++) { - r = &early_res[i]; - if (end > r->start && start < r->end) - break; - } - - return i; -} - -/* - * Drop the i-th range from the early reservation map, - * by copying any higher ranges down one over it, and - * clearing what had been the last slot. - */ -static void __init drop_range(int i) -{ - int j; - - for (j = i + 1; j < max_early_res && early_res[j].end; j++) - ; - - memmove(&early_res[i], &early_res[i + 1], - (j - 1 - i) * sizeof(struct early_res)); - - early_res[j - 1].end = 0; - early_res_count--; -} - -static void __init drop_range_partial(int i, u64 start, u64 end) -{ - u64 common_start, common_end; - u64 old_start, old_end; - - old_start = early_res[i].start; - old_end = early_res[i].end; - common_start = max(old_start, start); - common_end = min(old_end, end); - - /* no overlap ? */ - if (common_start >= common_end) - return; - - if (old_start < common_start) { - /* make head segment */ - early_res[i].end = common_start; - if (old_end > common_end) { - char name[15]; - - /* - * Save a local copy of the name, since the - * early_res array could get resized inside - * reserve_early_without_check() -> - * __check_and_double_early_res(), which would - * make the current name pointer invalid. - */ - strncpy(name, early_res[i].name, - sizeof(early_res[i].name) - 1); - /* add another for left over on tail */ - reserve_early_without_check(common_end, old_end, name); - } - return; - } else { - if (old_end > common_end) { - /* reuse the entry for tail left */ - early_res[i].start = common_end; - return; - } - /* all covered */ - drop_range(i); - } -} - -/* - * Split any existing ranges that: - * 1) are marked 'overlap_ok', and - * 2) overlap with the stated range [start, end) - * into whatever portion (if any) of the existing range is entirely - * below or entirely above the stated range. Drop the portion - * of the existing range that overlaps with the stated range, - * which will allow the caller of this routine to then add that - * stated range without conflicting with any existing range. - */ -static void __init drop_overlaps_that_are_ok(u64 start, u64 end) -{ - int i; - struct early_res *r; - u64 lower_start, lower_end; - u64 upper_start, upper_end; - char name[15]; - - for (i = 0; i < max_early_res && early_res[i].end; i++) { - r = &early_res[i]; - - /* Continue past non-overlapping ranges */ - if (end <= r->start || start >= r->end) - continue; - - /* - * Leave non-ok overlaps as is; let caller - * panic "Overlapping early reservations" - * when it hits this overlap. - */ - if (!r->overlap_ok) - return; - - /* - * We have an ok overlap. We will drop it from the early - * reservation map, and add back in any non-overlapping - * portions (lower or upper) as separate, overlap_ok, - * non-overlapping ranges. - */ - - /* 1. Note any non-overlapping (lower or upper) ranges. */ - strncpy(name, r->name, sizeof(name) - 1); - - lower_start = lower_end = 0; - upper_start = upper_end = 0; - if (r->start < start) { - lower_start = r->start; - lower_end = start; - } - if (r->end > end) { - upper_start = end; - upper_end = r->end; - } - - /* 2. Drop the original ok overlapping range */ - drop_range(i); - - i--; /* resume for-loop on copied down entry */ - - /* 3. Add back in any non-overlapping ranges. */ - if (lower_end) - reserve_early_overlap_ok(lower_start, lower_end, name); - if (upper_end) - reserve_early_overlap_ok(upper_start, upper_end, name); - } -} - -static void __init __reserve_early(u64 start, u64 end, char *name, - int overlap_ok) -{ - int i; - struct early_res *r; - - i = find_overlapped_early(start, end); - if (i >= max_early_res) - panic("Too many early reservations"); - r = &early_res[i]; - if (r->end) - panic("Overlapping early reservations " - "%llx-%llx %s to %llx-%llx %s\n", - start, end - 1, name ? name : "", r->start, - r->end - 1, r->name); - r->start = start; - r->end = end; - r->overlap_ok = overlap_ok; - if (name) - strncpy(r->name, name, sizeof(r->name) - 1); - early_res_count++; -} - -/* - * A few early reservtations come here. - * - * The 'overlap_ok' in the name of this routine does -not- mean it - * is ok for these reservations to overlap an earlier reservation. - * Rather it means that it is ok for subsequent reservations to - * overlap this one. - * - * Use this entry point to reserve early ranges when you are doing - * so out of "Paranoia", reserving perhaps more memory than you need, - * just in case, and don't mind a subsequent overlapping reservation - * that is known to be needed. - * - * The drop_overlaps_that_are_ok() call here isn't really needed. - * It would be needed if we had two colliding 'overlap_ok' - * reservations, so that the second such would not panic on the - * overlap with the first. We don't have any such as of this - * writing, but might as well tolerate such if it happens in - * the future. - */ -void __init reserve_early_overlap_ok(u64 start, u64 end, char *name) -{ - drop_overlaps_that_are_ok(start, end); - __reserve_early(start, end, name, 1); -} - -static void __init __check_and_double_early_res(u64 ex_start, u64 ex_end) -{ - u64 start, end, size, mem; - struct early_res *new; - - /* do we have enough slots left ? */ - if ((max_early_res - early_res_count) > max(max_early_res/8, 2)) - return; - - /* double it */ - mem = -1ULL; - size = sizeof(struct early_res) * max_early_res * 2; - if (early_res == early_res_x) - start = 0; - else - start = early_res[0].end; - end = ex_start; - if (start + size < end) - mem = find_fw_memmap_area(start, end, size, - sizeof(struct early_res)); - if (mem == -1ULL) { - start = ex_end; - end = get_max_mapped(); - if (start + size < end) - mem = find_fw_memmap_area(start, end, size, - sizeof(struct early_res)); - } - if (mem == -1ULL) - panic("can not find more space for early_res array"); - - new = __va(mem); - /* save the first one for own */ - new[0].start = mem; - new[0].end = mem + size; - new[0].overlap_ok = 0; - /* copy old to new */ - if (early_res == early_res_x) { - memcpy(&new[1], &early_res[0], - sizeof(struct early_res) * max_early_res); - memset(&new[max_early_res+1], 0, - sizeof(struct early_res) * (max_early_res - 1)); - early_res_count++; - } else { - memcpy(&new[1], &early_res[1], - sizeof(struct early_res) * (max_early_res - 1)); - memset(&new[max_early_res], 0, - sizeof(struct early_res) * max_early_res); - } - memset(&early_res[0], 0, sizeof(struct early_res) * max_early_res); - early_res = new; - max_early_res *= 2; - printk(KERN_DEBUG "early_res array is doubled to %d at [%llx - %llx]\n", - max_early_res, mem, mem + size - 1); -} - -/* - * Most early reservations come here. - * - * We first have drop_overlaps_that_are_ok() drop any pre-existing - * 'overlap_ok' ranges, so that we can then reserve this memory - * range without risk of panic'ing on an overlapping overlap_ok - * early reservation. - */ -void __init reserve_early(u64 start, u64 end, char *name) -{ - if (start >= end) - return; - - __check_and_double_early_res(start, end); - - drop_overlaps_that_are_ok(start, end); - __reserve_early(start, end, name, 0); -} - -void __init reserve_early_without_check(u64 start, u64 end, char *name) -{ - struct early_res *r; - - if (start >= end) - return; - - __check_and_double_early_res(start, end); - - r = &early_res[early_res_count]; - - r->start = start; - r->end = end; - r->overlap_ok = 0; - if (name) - strncpy(r->name, name, sizeof(r->name) - 1); - early_res_count++; -} - -void __init free_early(u64 start, u64 end) -{ - struct early_res *r; - int i; - - kmemleak_free_part(__va(start), end - start); - - i = find_overlapped_early(start, end); - r = &early_res[i]; - if (i >= max_early_res || r->end != end || r->start != start) - panic("free_early on not reserved area: %llx-%llx!", - start, end - 1); - - drop_range(i); -} - -void __init free_early_partial(u64 start, u64 end) -{ - struct early_res *r; - int i; - - kmemleak_free_part(__va(start), end - start); - - if (start == end) - return; - - if (WARN_ONCE(start > end, " wrong range [%#llx, %#llx]\n", start, end)) - return; - -try_next: - i = find_overlapped_early(start, end); - if (i >= max_early_res) - return; - - r = &early_res[i]; - /* hole ? */ - if (r->end >= end && r->start <= start) { - drop_range_partial(i, start, end); - return; - } - - drop_range_partial(i, start, end); - goto try_next; -} - -#ifdef CONFIG_NO_BOOTMEM -static void __init subtract_early_res(struct range *range, int az) -{ - int i, count; - u64 final_start, final_end; - int idx = 0; - - count = 0; - for (i = 0; i < max_early_res && early_res[i].end; i++) - count++; - - /* need to skip first one ?*/ - if (early_res != early_res_x) - idx = 1; - -#define DEBUG_PRINT_EARLY_RES 1 - -#if DEBUG_PRINT_EARLY_RES - printk(KERN_INFO "Subtract (%d early reservations)\n", count); -#endif - for (i = idx; i < count; i++) { - struct early_res *r = &early_res[i]; -#if DEBUG_PRINT_EARLY_RES - printk(KERN_INFO " #%d [%010llx - %010llx] %15s\n", i, - r->start, r->end, r->name); -#endif - final_start = PFN_DOWN(r->start); - final_end = PFN_UP(r->end); - if (final_start >= final_end) - continue; - subtract_range(range, az, final_start, final_end); - } - -} - -int __init get_free_all_memory_range(struct range **rangep, int nodeid) -{ - int i, count; - u64 start = 0, end; - u64 size; - u64 mem; - struct range *range; - int nr_range; - - count = 0; - for (i = 0; i < max_early_res && early_res[i].end; i++) - count++; - - count *= 2; - - size = sizeof(struct range) * count; - end = get_max_mapped(); -#ifdef MAX_DMA32_PFN - if (end > (MAX_DMA32_PFN << PAGE_SHIFT)) - start = MAX_DMA32_PFN << PAGE_SHIFT; -#endif - mem = find_fw_memmap_area(start, end, size, sizeof(struct range)); - if (mem == -1ULL) - panic("can not find more space for range free"); - - range = __va(mem); - /* use early_node_map[] and early_res to get range array at first */ - memset(range, 0, size); - nr_range = 0; - - /* need to go over early_node_map to find out good range for node */ - nr_range = add_from_early_node_map(range, count, nr_range, nodeid); -#ifdef CONFIG_X86_32 - subtract_range(range, count, max_low_pfn, -1ULL); -#endif - subtract_early_res(range, count); - nr_range = clean_sort_range(range, count); - - /* need to clear it ? */ - if (nodeid == MAX_NUMNODES) { - memset(&early_res[0], 0, - sizeof(struct early_res) * max_early_res); - early_res = NULL; - max_early_res = 0; - } - - *rangep = range; - return nr_range; -} -#else -void __init early_res_to_bootmem(u64 start, u64 end) -{ - int i, count; - u64 final_start, final_end; - int idx = 0; - - count = 0; - for (i = 0; i < max_early_res && early_res[i].end; i++) - count++; - - /* need to skip first one ?*/ - if (early_res != early_res_x) - idx = 1; - - printk(KERN_INFO "(%d/%d early reservations) ==> bootmem [%010llx - %010llx]\n", - count - idx, max_early_res, start, end); - for (i = idx; i < count; i++) { - struct early_res *r = &early_res[i]; - printk(KERN_INFO " #%d [%010llx - %010llx] %16s", i, - r->start, r->end, r->name); - final_start = max(start, r->start); - final_end = min(end, r->end); - if (final_start >= final_end) { - printk(KERN_CONT "\n"); - continue; - } - printk(KERN_CONT " ==> [%010llx - %010llx]\n", - final_start, final_end); - reserve_bootmem_generic(final_start, final_end - final_start, - BOOTMEM_DEFAULT); - } - /* clear them */ - memset(&early_res[0], 0, sizeof(struct early_res) * max_early_res); - early_res = NULL; - max_early_res = 0; - early_res_count = 0; -} -#endif - -/* Check for already reserved areas */ -static inline int __init bad_addr(u64 *addrp, u64 size, u64 align) -{ - int i; - u64 addr = *addrp; - int changed = 0; - struct early_res *r; -again: - i = find_overlapped_early(addr, addr + size); - r = &early_res[i]; - if (i < max_early_res && r->end) { - *addrp = addr = round_up(r->end, align); - changed = 1; - goto again; - } - return changed; -} - -/* Check for already reserved areas */ -static inline int __init bad_addr_size(u64 *addrp, u64 *sizep, u64 align) -{ - int i; - u64 addr = *addrp, last; - u64 size = *sizep; - int changed = 0; -again: - last = addr + size; - for (i = 0; i < max_early_res && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - if (last > r->start && addr < r->start) { - size = r->start - addr; - changed = 1; - goto again; - } - if (last > r->end && addr < r->end) { - addr = round_up(r->end, align); - size = last - addr; - changed = 1; - goto again; - } - if (last <= r->end && addr >= r->start) { - (*sizep)++; - return 0; - } - } - if (changed) { - *addrp = addr; - *sizep = size; - } - return changed; -} - -/* - * Find a free area with specified alignment in a specific range. - * only with the area.between start to end is active range from early_node_map - * so they are good as RAM - */ -u64 __init find_early_area(u64 ei_start, u64 ei_last, u64 start, u64 end, - u64 size, u64 align) -{ - u64 addr, last; - - addr = round_up(ei_start, align); - if (addr < start) - addr = round_up(start, align); - if (addr >= ei_last) - goto out; - while (bad_addr(&addr, size, align) && addr+size <= ei_last) - ; - last = addr + size; - if (last > ei_last) - goto out; - if (last > end) - goto out; - - return addr; - -out: - return -1ULL; -} - -u64 __init find_early_area_size(u64 ei_start, u64 ei_last, u64 start, - u64 *sizep, u64 align) -{ - u64 addr, last; - - addr = round_up(ei_start, align); - if (addr < start) - addr = round_up(start, align); - if (addr >= ei_last) - goto out; - *sizep = ei_last - addr; - while (bad_addr_size(&addr, sizep, align) && addr + *sizep <= ei_last) - ; - last = addr + *sizep; - if (last > ei_last) - goto out; - - return addr; - -out: - return -1ULL; -} diff --git a/kernel/kprobes.c b/kernel/kprobes.c index ec4210c6501e..7c44133f51ec 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -74,7 +74,8 @@ static struct hlist_head kretprobe_inst_table[KPROBE_TABLE_SIZE]; /* NOTE: change this value only with kprobe_mutex held */ static bool kprobes_all_disarmed; -static DEFINE_MUTEX(kprobe_mutex); /* Protects kprobe_table */ +/* This protects kprobe_table and optimizing_list */ +static DEFINE_MUTEX(kprobe_mutex); static DEFINE_PER_CPU(struct kprobe *, kprobe_instance) = NULL; static struct { spinlock_t lock ____cacheline_aligned_in_smp; @@ -595,6 +596,7 @@ static __kprobes void try_to_optimize_kprobe(struct kprobe *p) } #ifdef CONFIG_SYSCTL +/* This should be called with kprobe_mutex locked */ static void __kprobes optimize_all_kprobes(void) { struct hlist_head *head; @@ -607,17 +609,16 @@ static void __kprobes optimize_all_kprobes(void) return; kprobes_allow_optimization = true; - mutex_lock(&text_mutex); for (i = 0; i < KPROBE_TABLE_SIZE; i++) { head = &kprobe_table[i]; hlist_for_each_entry_rcu(p, node, head, hlist) if (!kprobe_disabled(p)) optimize_kprobe(p); } - mutex_unlock(&text_mutex); printk(KERN_INFO "Kprobes globally optimized\n"); } +/* This should be called with kprobe_mutex locked */ static void __kprobes unoptimize_all_kprobes(void) { struct hlist_head *head; diff --git a/kernel/perf_event.c b/kernel/perf_event.c index f309e8014c78..517d827f4982 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -417,8 +417,8 @@ event_filter_match(struct perf_event *event) return event->cpu == -1 || event->cpu == smp_processor_id(); } -static int -__event_sched_out(struct perf_event *event, +static void +event_sched_out(struct perf_event *event, struct perf_cpu_context *cpuctx, struct perf_event_context *ctx) { @@ -437,13 +437,14 @@ __event_sched_out(struct perf_event *event, } if (event->state != PERF_EVENT_STATE_ACTIVE) - return 0; + return; event->state = PERF_EVENT_STATE_INACTIVE; if (event->pending_disable) { event->pending_disable = 0; event->state = PERF_EVENT_STATE_OFF; } + event->tstamp_stopped = ctx->time; event->pmu->del(event, 0); event->oncpu = -1; @@ -452,19 +453,6 @@ __event_sched_out(struct perf_event *event, ctx->nr_active--; if (event->attr.exclusive || !cpuctx->active_oncpu) cpuctx->exclusive = 0; - return 1; -} - -static void -event_sched_out(struct perf_event *event, - struct perf_cpu_context *cpuctx, - struct perf_event_context *ctx) -{ - int ret; - - ret = __event_sched_out(event, cpuctx, ctx); - if (ret) - event->tstamp_stopped = ctx->time; } static void @@ -664,7 +652,7 @@ retry: } static int -__event_sched_in(struct perf_event *event, +event_sched_in(struct perf_event *event, struct perf_cpu_context *cpuctx, struct perf_event_context *ctx) { @@ -684,6 +672,8 @@ __event_sched_in(struct perf_event *event, return -EAGAIN; } + event->tstamp_running += ctx->time - event->tstamp_stopped; + if (!is_software_event(event)) cpuctx->active_oncpu++; ctx->nr_active++; @@ -694,35 +684,6 @@ __event_sched_in(struct perf_event *event, return 0; } -static inline int -event_sched_in(struct perf_event *event, - struct perf_cpu_context *cpuctx, - struct perf_event_context *ctx) -{ - int ret = __event_sched_in(event, cpuctx, ctx); - if (ret) - return ret; - event->tstamp_running += ctx->time - event->tstamp_stopped; - return 0; -} - -static void -group_commit_event_sched_in(struct perf_event *group_event, - struct perf_cpu_context *cpuctx, - struct perf_event_context *ctx) -{ - struct perf_event *event; - u64 now = ctx->time; - - group_event->tstamp_running += now - group_event->tstamp_stopped; - /* - * Schedule in siblings as one group (if any): - */ - list_for_each_entry(event, &group_event->sibling_list, group_entry) { - event->tstamp_running += now - event->tstamp_stopped; - } -} - static int group_sched_in(struct perf_event *group_event, struct perf_cpu_context *cpuctx, @@ -730,19 +691,15 @@ group_sched_in(struct perf_event *group_event, { struct perf_event *event, *partial_group = NULL; struct pmu *pmu = group_event->pmu; + u64 now = ctx->time; + bool simulate = false; if (group_event->state == PERF_EVENT_STATE_OFF) return 0; pmu->start_txn(pmu); - /* - * use __event_sched_in() to delay updating tstamp_running - * until the transaction is committed. In case of failure - * we will keep an unmodified tstamp_running which is a - * requirement to get correct timing information - */ - if (__event_sched_in(group_event, cpuctx, ctx)) { + if (event_sched_in(group_event, cpuctx, ctx)) { pmu->cancel_txn(pmu); return -EAGAIN; } @@ -751,31 +708,42 @@ group_sched_in(struct perf_event *group_event, * Schedule in siblings as one group (if any): */ list_for_each_entry(event, &group_event->sibling_list, group_entry) { - if (__event_sched_in(event, cpuctx, ctx)) { + if (event_sched_in(event, cpuctx, ctx)) { partial_group = event; goto group_error; } } - if (!pmu->commit_txn(pmu)) { - /* commit tstamp_running */ - group_commit_event_sched_in(group_event, cpuctx, ctx); + if (!pmu->commit_txn(pmu)) return 0; - } + group_error: /* * Groups can be scheduled in as one unit only, so undo any * partial group before returning: + * The events up to the failed event are scheduled out normally, + * tstamp_stopped will be updated. * - * use __event_sched_out() to avoid updating tstamp_stopped - * because the event never actually ran + * The failed events and the remaining siblings need to have + * their timings updated as if they had gone thru event_sched_in() + * and event_sched_out(). This is required to get consistent timings + * across the group. This also takes care of the case where the group + * could never be scheduled by ensuring tstamp_stopped is set to mark + * the time the event was actually stopped, such that time delta + * calculation in update_event_times() is correct. */ list_for_each_entry(event, &group_event->sibling_list, group_entry) { if (event == partial_group) - break; - __event_sched_out(event, cpuctx, ctx); + simulate = true; + + if (simulate) { + event->tstamp_running += now - event->tstamp_stopped; + event->tstamp_stopped = now; + } else { + event_sched_out(event, cpuctx, ctx); + } } - __event_sched_out(group_event, cpuctx, ctx); + event_sched_out(group_event, cpuctx, ctx); pmu->cancel_txn(pmu); diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index ca6066a6952e..29bff6117abc 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -86,6 +86,7 @@ config PM_SLEEP_SMP depends on SMP depends on ARCH_SUSPEND_POSSIBLE || ARCH_HIBERNATION_POSSIBLE depends on PM_SLEEP + select HOTPLUG select HOTPLUG_CPU default y @@ -137,6 +138,8 @@ config SUSPEND_FREEZER config HIBERNATION bool "Hibernation (aka 'suspend to disk')" depends on PM && SWAP && ARCH_HIBERNATION_POSSIBLE + select LZO_COMPRESS + select LZO_DECOMPRESS select SUSPEND_NVS if HAS_IOMEM ---help--- Enable the suspend to disk (STD) functionality, which is usually @@ -242,3 +245,17 @@ config PM_OPS bool depends on PM_SLEEP || PM_RUNTIME default y + +config PM_OPP + bool "Operating Performance Point (OPP) Layer library" + depends on PM + ---help--- + SOCs have a standard set of tuples consisting of frequency and + voltage pairs that the device will support per voltage domain. This + is called Operating Performance Point or OPP. The actual definitions + of OPP varies over silicon within the same family of devices. + + OPP layer organizes the data internally using device pointers + representing individual voltage domains and provides SOC + implementations a ready to use framework to manage OPPs. + For more information, read <file:Documentation/power/opp.txt> diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 8dc31e02ae12..657272e91d0a 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -29,6 +29,7 @@ #include "power.h" +static int nocompress = 0; static int noresume = 0; static char resume_file[256] = CONFIG_PM_STD_PARTITION; dev_t swsusp_resume_device; @@ -638,6 +639,8 @@ int hibernate(void) if (hibernation_mode == HIBERNATION_PLATFORM) flags |= SF_PLATFORM_MODE; + if (nocompress) + flags |= SF_NOCOMPRESS_MODE; pr_debug("PM: writing image.\n"); error = swsusp_write(flags); swsusp_free(); @@ -705,7 +708,7 @@ static int software_resume(void) goto Unlock; } - pr_debug("PM: Checking image partition %s\n", resume_file); + pr_debug("PM: Checking hibernation image partition %s\n", resume_file); /* Check if the device is there */ swsusp_resume_device = name_to_dev_t(resume_file); @@ -730,10 +733,10 @@ static int software_resume(void) } Check_image: - pr_debug("PM: Resume from partition %d:%d\n", + pr_debug("PM: Hibernation image partition %d:%d present\n", MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device)); - pr_debug("PM: Checking hibernation image.\n"); + pr_debug("PM: Looking for hibernation image.\n"); error = swsusp_check(); if (error) goto Unlock; @@ -765,14 +768,14 @@ static int software_resume(void) goto Done; } - pr_debug("PM: Reading hibernation image.\n"); + pr_debug("PM: Loading hibernation image.\n"); error = swsusp_read(&flags); swsusp_close(FMODE_READ); if (!error) hibernation_restore(flags & SF_PLATFORM_MODE); - printk(KERN_ERR "PM: Restore failed, recovering.\n"); + printk(KERN_ERR "PM: Failed to load hibernation image, recovering.\n"); swsusp_free(); thaw_processes(); Done: @@ -785,7 +788,7 @@ static int software_resume(void) /* For success case, the suspend path will release the lock */ Unlock: mutex_unlock(&pm_mutex); - pr_debug("PM: Resume from disk failed.\n"); + pr_debug("PM: Hibernation image not present or could not be loaded.\n"); return error; close_finish: swsusp_close(FMODE_READ); @@ -1004,6 +1007,15 @@ static int __init resume_offset_setup(char *str) return 1; } +static int __init hibernate_setup(char *str) +{ + if (!strncmp(str, "noresume", 8)) + noresume = 1; + else if (!strncmp(str, "nocompress", 10)) + nocompress = 1; + return 1; +} + static int __init noresume_setup(char *str) { noresume = 1; @@ -1013,3 +1025,4 @@ static int __init noresume_setup(char *str) __setup("noresume", noresume_setup); __setup("resume_offset=", resume_offset_setup); __setup("resume=", resume_setup); +__setup("hibernate=", hibernate_setup); diff --git a/kernel/power/main.c b/kernel/power/main.c index 62b0bc6e4983..7b5db6a8561e 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -237,18 +237,18 @@ static ssize_t wakeup_count_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { - unsigned long val; + unsigned int val; - return pm_get_wakeup_count(&val) ? sprintf(buf, "%lu\n", val) : -EINTR; + return pm_get_wakeup_count(&val) ? sprintf(buf, "%u\n", val) : -EINTR; } static ssize_t wakeup_count_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, size_t n) { - unsigned long val; + unsigned int val; - if (sscanf(buf, "%lu", &val) == 1) { + if (sscanf(buf, "%u", &val) == 1) { if (pm_save_wakeup_count(val)) return n; } @@ -281,12 +281,30 @@ pm_trace_store(struct kobject *kobj, struct kobj_attribute *attr, } power_attr(pm_trace); + +static ssize_t pm_trace_dev_match_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + return show_trace_dev_match(buf, PAGE_SIZE); +} + +static ssize_t +pm_trace_dev_match_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t n) +{ + return -EINVAL; +} + +power_attr(pm_trace_dev_match); + #endif /* CONFIG_PM_TRACE */ static struct attribute * g[] = { &state_attr.attr, #ifdef CONFIG_PM_TRACE &pm_trace_attr.attr, + &pm_trace_dev_match_attr.attr, #endif #ifdef CONFIG_PM_SLEEP &pm_async_attr.attr, @@ -308,7 +326,7 @@ EXPORT_SYMBOL_GPL(pm_wq); static int __init pm_start_workqueue(void) { - pm_wq = create_freezeable_workqueue("pm"); + pm_wq = alloc_workqueue("pm", WQ_FREEZEABLE, 0); return pm_wq ? 0 : -ENOMEM; } @@ -321,6 +339,7 @@ static int __init pm_init(void) int error = pm_start_workqueue(); if (error) return error; + hibernate_image_size_init(); power_kobj = kobject_create_and_add("power", NULL); if (!power_kobj) return -ENOMEM; diff --git a/kernel/power/power.h b/kernel/power/power.h index 006270fe382d..03634be55f62 100644 --- a/kernel/power/power.h +++ b/kernel/power/power.h @@ -14,6 +14,9 @@ struct swsusp_info { } __attribute__((aligned(PAGE_SIZE))); #ifdef CONFIG_HIBERNATION +/* kernel/power/snapshot.c */ +extern void __init hibernate_image_size_init(void); + #ifdef CONFIG_ARCH_HIBERNATION_HEADER /* Maximum size of architecture specific data in a hibernation header */ #define MAX_ARCH_HEADER_SIZE (sizeof(struct new_utsname) + 4) @@ -49,7 +52,11 @@ static inline char *check_image_kernel(struct swsusp_info *info) extern int hibernation_snapshot(int platform_mode); extern int hibernation_restore(int platform_mode); extern int hibernation_platform_enter(void); -#endif + +#else /* !CONFIG_HIBERNATION */ + +static inline void hibernate_image_size_init(void) {} +#endif /* !CONFIG_HIBERNATION */ extern int pfn_is_nosave(unsigned long); @@ -134,6 +141,7 @@ extern int swsusp_swap_in_use(void); * the image header. */ #define SF_PLATFORM_MODE 1 +#define SF_NOCOMPRESS_MODE 2 /* kernel/power/hibernate.c */ extern int swsusp_check(void); diff --git a/kernel/power/process.c b/kernel/power/process.c index 028a99598f49..e50b4c1b2a0f 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -40,6 +40,7 @@ static int try_to_freeze_tasks(bool sig_only) struct timeval start, end; u64 elapsed_csecs64; unsigned int elapsed_csecs; + bool wakeup = false; do_gettimeofday(&start); @@ -78,6 +79,11 @@ static int try_to_freeze_tasks(bool sig_only) if (!todo || time_after(jiffies, end_time)) break; + if (!pm_check_wakeup_events()) { + wakeup = true; + break; + } + /* * We need to retry, but first give the freezing tasks some * time to enter the regrigerator. @@ -97,8 +103,9 @@ static int try_to_freeze_tasks(bool sig_only) * but it cleans up leftover PF_FREEZE requests. */ printk("\n"); - printk(KERN_ERR "Freezing of tasks failed after %d.%02d seconds " + printk(KERN_ERR "Freezing of tasks %s after %d.%02d seconds " "(%d tasks refusing to freeze, wq_busy=%d):\n", + wakeup ? "aborted" : "failed", elapsed_csecs / 100, elapsed_csecs % 100, todo - wq_busy, wq_busy); @@ -107,7 +114,7 @@ static int try_to_freeze_tasks(bool sig_only) read_lock(&tasklist_lock); do_each_thread(g, p) { task_lock(p); - if (freezing(p) && !freezer_should_skip(p)) + if (!wakeup && freezing(p) && !freezer_should_skip(p)) sched_show_task(p); cancel_freezing(p); task_unlock(p); diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index d3f795f01bbc..ac7eb109f196 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -46,7 +46,12 @@ static void swsusp_unset_page_forbidden(struct page *); * size will not exceed N bytes, but if that is impossible, it will * try to create the smallest image possible. */ -unsigned long image_size = 500 * 1024 * 1024; +unsigned long image_size; + +void __init hibernate_image_size_init(void) +{ + image_size = ((totalram_pages * 2) / 5) * PAGE_SIZE; +} /* List of PBEs needed for restoring the pages that were allocated before * the suspend and included in the suspend image, but have also been @@ -1318,12 +1323,14 @@ int hibernate_preallocate_memory(void) /* Compute the maximum number of saveable pages to leave in memory. */ max_size = (count - (size + PAGES_FOR_IO)) / 2 - 2 * SPARE_PAGES; + /* Compute the desired number of image pages specified by image_size. */ size = DIV_ROUND_UP(image_size, PAGE_SIZE); if (size > max_size) size = max_size; /* - * If the maximum is not less than the current number of saveable pages - * in memory, allocate page frames for the image and we're done. + * If the desired number of image pages is at least as large as the + * current number of saveable pages in memory, allocate page frames for + * the image and we're done. */ if (size >= saveable) { pages = preallocate_image_highmem(save_highmem); diff --git a/kernel/power/swap.c b/kernel/power/swap.c index e6a5bdf61a37..916eaa790399 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -24,10 +24,12 @@ #include <linux/swapops.h> #include <linux/pm.h> #include <linux/slab.h> +#include <linux/lzo.h> +#include <linux/vmalloc.h> #include "power.h" -#define SWSUSP_SIG "S1SUSPEND" +#define HIBERNATE_SIG "LINHIB0001" /* * The swap map is a data structure used for keeping track of each page @@ -193,7 +195,7 @@ static int mark_swapfiles(struct swap_map_handle *handle, unsigned int flags) if (!memcmp("SWAP-SPACE",swsusp_header->sig, 10) || !memcmp("SWAPSPACE2",swsusp_header->sig, 10)) { memcpy(swsusp_header->orig_sig,swsusp_header->sig, 10); - memcpy(swsusp_header->sig,SWSUSP_SIG, 10); + memcpy(swsusp_header->sig, HIBERNATE_SIG, 10); swsusp_header->image = handle->first_sector; swsusp_header->flags = flags; error = hib_bio_write_page(swsusp_resume_block, @@ -357,6 +359,18 @@ static int swap_writer_finish(struct swap_map_handle *handle, return error; } +/* We need to remember how much compressed data we need to read. */ +#define LZO_HEADER sizeof(size_t) + +/* Number of pages/bytes we'll compress at one time. */ +#define LZO_UNC_PAGES 32 +#define LZO_UNC_SIZE (LZO_UNC_PAGES * PAGE_SIZE) + +/* Number of pages/bytes we need for compressed data (worst case). */ +#define LZO_CMP_PAGES DIV_ROUND_UP(lzo1x_worst_compress(LZO_UNC_SIZE) + \ + LZO_HEADER, PAGE_SIZE) +#define LZO_CMP_SIZE (LZO_CMP_PAGES * PAGE_SIZE) + /** * save_image - save the suspend image data */ @@ -404,6 +418,137 @@ static int save_image(struct swap_map_handle *handle, return ret; } + +/** + * save_image_lzo - Save the suspend image data compressed with LZO. + * @handle: Swap mam handle to use for saving the image. + * @snapshot: Image to read data from. + * @nr_to_write: Number of pages to save. + */ +static int save_image_lzo(struct swap_map_handle *handle, + struct snapshot_handle *snapshot, + unsigned int nr_to_write) +{ + unsigned int m; + int ret = 0; + int nr_pages; + int err2; + struct bio *bio; + struct timeval start; + struct timeval stop; + size_t off, unc_len, cmp_len; + unsigned char *unc, *cmp, *wrk, *page; + + page = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH); + if (!page) { + printk(KERN_ERR "PM: Failed to allocate LZO page\n"); + return -ENOMEM; + } + + wrk = vmalloc(LZO1X_1_MEM_COMPRESS); + if (!wrk) { + printk(KERN_ERR "PM: Failed to allocate LZO workspace\n"); + free_page((unsigned long)page); + return -ENOMEM; + } + + unc = vmalloc(LZO_UNC_SIZE); + if (!unc) { + printk(KERN_ERR "PM: Failed to allocate LZO uncompressed\n"); + vfree(wrk); + free_page((unsigned long)page); + return -ENOMEM; + } + + cmp = vmalloc(LZO_CMP_SIZE); + if (!cmp) { + printk(KERN_ERR "PM: Failed to allocate LZO compressed\n"); + vfree(unc); + vfree(wrk); + free_page((unsigned long)page); + return -ENOMEM; + } + + printk(KERN_INFO + "PM: Compressing and saving image data (%u pages) ... ", + nr_to_write); + m = nr_to_write / 100; + if (!m) + m = 1; + nr_pages = 0; + bio = NULL; + do_gettimeofday(&start); + for (;;) { + for (off = 0; off < LZO_UNC_SIZE; off += PAGE_SIZE) { + ret = snapshot_read_next(snapshot); + if (ret < 0) + goto out_finish; + + if (!ret) + break; + + memcpy(unc + off, data_of(*snapshot), PAGE_SIZE); + + if (!(nr_pages % m)) + printk(KERN_CONT "\b\b\b\b%3d%%", nr_pages / m); + nr_pages++; + } + + if (!off) + break; + + unc_len = off; + ret = lzo1x_1_compress(unc, unc_len, + cmp + LZO_HEADER, &cmp_len, wrk); + if (ret < 0) { + printk(KERN_ERR "PM: LZO compression failed\n"); + break; + } + + if (unlikely(!cmp_len || + cmp_len > lzo1x_worst_compress(unc_len))) { + printk(KERN_ERR "PM: Invalid LZO compressed length\n"); + ret = -1; + break; + } + + *(size_t *)cmp = cmp_len; + + /* + * Given we are writing one page at a time to disk, we copy + * that much from the buffer, although the last bit will likely + * be smaller than full page. This is OK - we saved the length + * of the compressed data, so any garbage at the end will be + * discarded when we read it. + */ + for (off = 0; off < LZO_HEADER + cmp_len; off += PAGE_SIZE) { + memcpy(page, cmp + off, PAGE_SIZE); + + ret = swap_write_page(handle, page, &bio); + if (ret) + goto out_finish; + } + } + +out_finish: + err2 = hib_wait_on_bio_chain(&bio); + do_gettimeofday(&stop); + if (!ret) + ret = err2; + if (!ret) + printk(KERN_CONT "\b\b\b\bdone\n"); + else + printk(KERN_CONT "\n"); + swsusp_show_speed(&start, &stop, nr_to_write, "Wrote"); + + vfree(cmp); + vfree(unc); + vfree(wrk); + free_page((unsigned long)page); + + return ret; +} + /** * enough_swap - Make sure we have enough swap to save the image. * @@ -411,12 +556,16 @@ static int save_image(struct swap_map_handle *handle, * space avaiable from the resume partition. */ -static int enough_swap(unsigned int nr_pages) +static int enough_swap(unsigned int nr_pages, unsigned int flags) { unsigned int free_swap = count_swap_pages(root_swap, 1); + unsigned int required; pr_debug("PM: Free swap pages: %u\n", free_swap); - return free_swap > nr_pages + PAGES_FOR_IO; + + required = PAGES_FOR_IO + ((flags & SF_NOCOMPRESS_MODE) ? + nr_pages : (nr_pages * LZO_CMP_PAGES) / LZO_UNC_PAGES + 1); + return free_swap > required; } /** @@ -443,7 +592,7 @@ int swsusp_write(unsigned int flags) printk(KERN_ERR "PM: Cannot get swap writer\n"); return error; } - if (!enough_swap(pages)) { + if (!enough_swap(pages, flags)) { printk(KERN_ERR "PM: Not enough free swap\n"); error = -ENOSPC; goto out_finish; @@ -458,8 +607,11 @@ int swsusp_write(unsigned int flags) } header = (struct swsusp_info *)data_of(snapshot); error = swap_write_page(&handle, header, NULL); - if (!error) - error = save_image(&handle, &snapshot, pages - 1); + if (!error) { + error = (flags & SF_NOCOMPRESS_MODE) ? + save_image(&handle, &snapshot, pages - 1) : + save_image_lzo(&handle, &snapshot, pages - 1); + } out_finish: error = swap_writer_finish(&handle, flags, error); return error; @@ -590,6 +742,127 @@ static int load_image(struct swap_map_handle *handle, } /** + * load_image_lzo - Load compressed image data and decompress them with LZO. + * @handle: Swap map handle to use for loading data. + * @snapshot: Image to copy uncompressed data into. + * @nr_to_read: Number of pages to load. + */ +static int load_image_lzo(struct swap_map_handle *handle, + struct snapshot_handle *snapshot, + unsigned int nr_to_read) +{ + unsigned int m; + int error = 0; + struct timeval start; + struct timeval stop; + unsigned nr_pages; + size_t off, unc_len, cmp_len; + unsigned char *unc, *cmp, *page; + + page = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH); + if (!page) { + printk(KERN_ERR "PM: Failed to allocate LZO page\n"); + return -ENOMEM; + } + + unc = vmalloc(LZO_UNC_SIZE); + if (!unc) { + printk(KERN_ERR "PM: Failed to allocate LZO uncompressed\n"); + free_page((unsigned long)page); + return -ENOMEM; + } + + cmp = vmalloc(LZO_CMP_SIZE); + if (!cmp) { + printk(KERN_ERR "PM: Failed to allocate LZO compressed\n"); + vfree(unc); + free_page((unsigned long)page); + return -ENOMEM; + } + + printk(KERN_INFO + "PM: Loading and decompressing image data (%u pages) ... ", + nr_to_read); + m = nr_to_read / 100; + if (!m) + m = 1; + nr_pages = 0; + do_gettimeofday(&start); + + error = snapshot_write_next(snapshot); + if (error <= 0) + goto out_finish; + + for (;;) { + error = swap_read_page(handle, page, NULL); /* sync */ + if (error) + break; + + cmp_len = *(size_t *)page; + if (unlikely(!cmp_len || + cmp_len > lzo1x_worst_compress(LZO_UNC_SIZE))) { + printk(KERN_ERR "PM: Invalid LZO compressed length\n"); + error = -1; + break; + } + + memcpy(cmp, page, PAGE_SIZE); + for (off = PAGE_SIZE; off < LZO_HEADER + cmp_len; off += PAGE_SIZE) { + error = swap_read_page(handle, page, NULL); /* sync */ + if (error) + goto out_finish; + + memcpy(cmp + off, page, PAGE_SIZE); + } + + unc_len = LZO_UNC_SIZE; + error = lzo1x_decompress_safe(cmp + LZO_HEADER, cmp_len, + unc, &unc_len); + if (error < 0) { + printk(KERN_ERR "PM: LZO decompression failed\n"); + break; + } + + if (unlikely(!unc_len || + unc_len > LZO_UNC_SIZE || + unc_len & (PAGE_SIZE - 1))) { + printk(KERN_ERR "PM: Invalid LZO uncompressed length\n"); + error = -1; + break; + } + + for (off = 0; off < unc_len; off += PAGE_SIZE) { + memcpy(data_of(*snapshot), unc + off, PAGE_SIZE); + + if (!(nr_pages % m)) + printk("\b\b\b\b%3d%%", nr_pages / m); + nr_pages++; + + error = snapshot_write_next(snapshot); + if (error <= 0) + goto out_finish; + } + } + +out_finish: + do_gettimeofday(&stop); + if (!error) { + printk("\b\b\b\bdone\n"); + snapshot_write_finalize(snapshot); + if (!snapshot_image_loaded(snapshot)) + error = -ENODATA; + } else + printk("\n"); + swsusp_show_speed(&start, &stop, nr_to_read, "Read"); + + vfree(cmp); + vfree(unc); + free_page((unsigned long)page); + + return error; +} + +/** * swsusp_read - read the hibernation image. * @flags_p: flags passed by the "frozen" kernel in the image header should * be written into this memeory location @@ -612,8 +885,11 @@ int swsusp_read(unsigned int *flags_p) goto end; if (!error) error = swap_read_page(&handle, header, NULL); - if (!error) - error = load_image(&handle, &snapshot, header->pages - 1); + if (!error) { + error = (*flags_p & SF_NOCOMPRESS_MODE) ? + load_image(&handle, &snapshot, header->pages - 1) : + load_image_lzo(&handle, &snapshot, header->pages - 1); + } swap_reader_finish(&handle); end: if (!error) @@ -640,7 +916,7 @@ int swsusp_check(void) if (error) goto put; - if (!memcmp(SWSUSP_SIG, swsusp_header->sig, 10)) { + if (!memcmp(HIBERNATE_SIG, swsusp_header->sig, 10)) { memcpy(swsusp_header->sig, swsusp_header->orig_sig, 10); /* Reset swap signature now */ error = hib_bio_write_page(swsusp_resume_block, @@ -653,13 +929,13 @@ put: if (error) blkdev_put(hib_resume_bdev, FMODE_READ); else - pr_debug("PM: Signature found, resuming\n"); + pr_debug("PM: Image signature found, resuming\n"); } else { error = PTR_ERR(hib_resume_bdev); } if (error) - pr_debug("PM: Error %d checking image file\n", error); + pr_debug("PM: Image not found (code %d)\n", error); return error; } diff --git a/kernel/softirq.c b/kernel/softirq.c index fc978889b194..e33fd71ed66a 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -229,18 +229,20 @@ restart: do { if (pending & 1) { + unsigned int vec_nr = h - softirq_vec; int prev_count = preempt_count(); - kstat_incr_softirqs_this_cpu(h - softirq_vec); - trace_softirq_entry(h, softirq_vec); + kstat_incr_softirqs_this_cpu(vec_nr); + + trace_softirq_entry(vec_nr); h->action(h); - trace_softirq_exit(h, softirq_vec); + trace_softirq_exit(vec_nr); if (unlikely(prev_count != preempt_count())) { - printk(KERN_ERR "huh, entered softirq %td %s %p" + printk(KERN_ERR "huh, entered softirq %u %s %p" "with preempt_count %08x," - " exited with %08x?\n", h - softirq_vec, - softirq_to_name[h - softirq_vec], - h->action, prev_count, preempt_count()); + " exited with %08x?\n", vec_nr, + softirq_to_name[vec_nr], h->action, + prev_count, preempt_count()); preempt_count() = prev_count; } diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c index bad369ec5403..c782fe9924c7 100644 --- a/kernel/sys_ni.c +++ b/kernel/sys_ni.c @@ -50,6 +50,7 @@ cond_syscall(compat_sys_sendmsg); cond_syscall(sys_recvmsg); cond_syscall(sys_recvmmsg); cond_syscall(compat_sys_recvmsg); +cond_syscall(compat_sys_recv); cond_syscall(compat_sys_recvfrom); cond_syscall(compat_sys_recvmmsg); cond_syscall(sys_socketcall); diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index e550d2eda1df..e04b8bcdef88 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -126,7 +126,7 @@ if FTRACE config FUNCTION_TRACER bool "Kernel Function Tracer" depends on HAVE_FUNCTION_TRACER - select FRAME_POINTER + select FRAME_POINTER if (!ARM_UNWIND) select KALLSYMS select GENERIC_TRACER select CONTEXT_SWITCH_TRACER diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 001bcd2ccf4a..82d9b8106cd0 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3996,13 +3996,9 @@ static void tracing_init_debugfs_percpu(long cpu) { struct dentry *d_percpu = tracing_dentry_percpu(); struct dentry *d_cpu; - /* strlen(cpu) + MAX(log10(cpu)) + '\0' */ - char cpu_dir[7]; + char cpu_dir[30]; /* 30 characters should be more than enough */ - if (cpu > 999 || cpu < 0) - return; - - sprintf(cpu_dir, "cpu%ld", cpu); + snprintf(cpu_dir, 30, "cpu%ld", cpu); d_cpu = debugfs_create_dir(cpu_dir, d_percpu); if (!d_cpu) { pr_warning("Could not create debugfs '%s' entry\n", cpu_dir); diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 544301d29dee..b8d2852baa4a 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -648,7 +648,7 @@ static int register_trace_probe(struct trace_probe *tp) } ret = register_probe_event(tp); if (ret) { - pr_warning("Faild to register probe event(%d)\n", ret); + pr_warning("Failed to register probe event(%d)\n", ret); goto end; } diff --git a/mm/bootmem.c b/mm/bootmem.c index 142c84a54993..13b0caa9793c 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -15,6 +15,7 @@ #include <linux/module.h> #include <linux/kmemleak.h> #include <linux/range.h> +#include <linux/memblock.h> #include <asm/bug.h> #include <asm/io.h> @@ -434,7 +435,8 @@ void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, unsigned long size) { #ifdef CONFIG_NO_BOOTMEM - free_early(physaddr, physaddr + size); + kmemleak_free_part(__va(physaddr), size); + memblock_x86_free_range(physaddr, physaddr + size); #else unsigned long start, end; @@ -459,7 +461,8 @@ void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, void __init free_bootmem(unsigned long addr, unsigned long size) { #ifdef CONFIG_NO_BOOTMEM - free_early(addr, addr + size); + kmemleak_free_part(__va(addr), size); + memblock_x86_free_range(addr, addr + size); #else unsigned long start, end; @@ -526,6 +529,12 @@ int __init reserve_bootmem(unsigned long addr, unsigned long size, } #ifndef CONFIG_NO_BOOTMEM +int __weak __init reserve_bootmem_generic(unsigned long phys, unsigned long len, + int flags) +{ + return reserve_bootmem(phys, len, flags); +} + static unsigned long __init align_idx(struct bootmem_data *bdata, unsigned long idx, unsigned long step) { diff --git a/mm/memblock.c b/mm/memblock.c index 43840b305ecb..400dc62697d7 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -11,237 +11,423 @@ */ #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/init.h> #include <linux/bitops.h> +#include <linux/poison.h> +#include <linux/pfn.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> #include <linux/memblock.h> -#define MEMBLOCK_ALLOC_ANYWHERE 0 +struct memblock memblock __initdata_memblock; -struct memblock memblock; +int memblock_debug __initdata_memblock; +int memblock_can_resize __initdata_memblock; +static struct memblock_region memblock_memory_init_regions[INIT_MEMBLOCK_REGIONS + 1] __initdata_memblock; +static struct memblock_region memblock_reserved_init_regions[INIT_MEMBLOCK_REGIONS + 1] __initdata_memblock; -static int memblock_debug; +/* inline so we don't get a warning when pr_debug is compiled out */ +static inline const char *memblock_type_name(struct memblock_type *type) +{ + if (type == &memblock.memory) + return "memory"; + else if (type == &memblock.reserved) + return "reserved"; + else + return "unknown"; +} -static int __init early_memblock(char *p) +/* + * Address comparison utilities + */ + +static phys_addr_t __init_memblock memblock_align_down(phys_addr_t addr, phys_addr_t size) { - if (p && strstr(p, "debug")) - memblock_debug = 1; + return addr & ~(size - 1); +} + +static phys_addr_t __init_memblock memblock_align_up(phys_addr_t addr, phys_addr_t size) +{ + return (addr + (size - 1)) & ~(size - 1); +} + +static unsigned long __init_memblock memblock_addrs_overlap(phys_addr_t base1, phys_addr_t size1, + phys_addr_t base2, phys_addr_t size2) +{ + return ((base1 < (base2 + size2)) && (base2 < (base1 + size1))); +} + +static long __init_memblock memblock_addrs_adjacent(phys_addr_t base1, phys_addr_t size1, + phys_addr_t base2, phys_addr_t size2) +{ + if (base2 == base1 + size1) + return 1; + else if (base1 == base2 + size2) + return -1; + return 0; } -early_param("memblock", early_memblock); -static void memblock_dump(struct memblock_region *region, char *name) +static long __init_memblock memblock_regions_adjacent(struct memblock_type *type, + unsigned long r1, unsigned long r2) { - unsigned long long base, size; - int i; + phys_addr_t base1 = type->regions[r1].base; + phys_addr_t size1 = type->regions[r1].size; + phys_addr_t base2 = type->regions[r2].base; + phys_addr_t size2 = type->regions[r2].size; - pr_info(" %s.cnt = 0x%lx\n", name, region->cnt); + return memblock_addrs_adjacent(base1, size1, base2, size2); +} - for (i = 0; i < region->cnt; i++) { - base = region->region[i].base; - size = region->region[i].size; +long __init_memblock memblock_overlaps_region(struct memblock_type *type, phys_addr_t base, phys_addr_t size) +{ + unsigned long i; - pr_info(" %s[0x%x]\t0x%016llx - 0x%016llx, 0x%llx bytes\n", - name, i, base, base + size - 1, size); + for (i = 0; i < type->cnt; i++) { + phys_addr_t rgnbase = type->regions[i].base; + phys_addr_t rgnsize = type->regions[i].size; + if (memblock_addrs_overlap(base, size, rgnbase, rgnsize)) + break; } + + return (i < type->cnt) ? i : -1; } -void memblock_dump_all(void) +/* + * Find, allocate, deallocate or reserve unreserved regions. All allocations + * are top-down. + */ + +static phys_addr_t __init_memblock memblock_find_region(phys_addr_t start, phys_addr_t end, + phys_addr_t size, phys_addr_t align) { - if (!memblock_debug) - return; + phys_addr_t base, res_base; + long j; - pr_info("MEMBLOCK configuration:\n"); - pr_info(" rmo_size = 0x%llx\n", (unsigned long long)memblock.rmo_size); - pr_info(" memory.size = 0x%llx\n", (unsigned long long)memblock.memory.size); + /* In case, huge size is requested */ + if (end < size) + return MEMBLOCK_ERROR; - memblock_dump(&memblock.memory, "memory"); - memblock_dump(&memblock.reserved, "reserved"); + base = memblock_align_down((end - size), align); + + /* Prevent allocations returning 0 as it's also used to + * indicate an allocation failure + */ + if (start == 0) + start = PAGE_SIZE; + + while (start <= base) { + j = memblock_overlaps_region(&memblock.reserved, base, size); + if (j < 0) + return base; + res_base = memblock.reserved.regions[j].base; + if (res_base < size) + break; + base = memblock_align_down(res_base - size, align); + } + + return MEMBLOCK_ERROR; } -static unsigned long memblock_addrs_overlap(u64 base1, u64 size1, u64 base2, - u64 size2) +static phys_addr_t __init_memblock memblock_find_base(phys_addr_t size, + phys_addr_t align, phys_addr_t start, phys_addr_t end) { - return ((base1 < (base2 + size2)) && (base2 < (base1 + size1))); + long i; + + BUG_ON(0 == size); + + size = memblock_align_up(size, align); + + /* Pump up max_addr */ + if (end == MEMBLOCK_ALLOC_ACCESSIBLE) + end = memblock.current_limit; + + /* We do a top-down search, this tends to limit memory + * fragmentation by keeping early boot allocs near the + * top of memory + */ + for (i = memblock.memory.cnt - 1; i >= 0; i--) { + phys_addr_t memblockbase = memblock.memory.regions[i].base; + phys_addr_t memblocksize = memblock.memory.regions[i].size; + phys_addr_t bottom, top, found; + + if (memblocksize < size) + continue; + if ((memblockbase + memblocksize) <= start) + break; + bottom = max(memblockbase, start); + top = min(memblockbase + memblocksize, end); + if (bottom >= top) + continue; + found = memblock_find_region(bottom, top, size, align); + if (found != MEMBLOCK_ERROR) + return found; + } + return MEMBLOCK_ERROR; } -static long memblock_addrs_adjacent(u64 base1, u64 size1, u64 base2, u64 size2) +/* + * Find a free area with specified alignment in a specific range. + */ +u64 __init_memblock memblock_find_in_range(u64 start, u64 end, u64 size, u64 align) { - if (base2 == base1 + size1) - return 1; - else if (base1 == base2 + size2) - return -1; + return memblock_find_base(size, align, start, end); +} - return 0; +/* + * Free memblock.reserved.regions + */ +int __init_memblock memblock_free_reserved_regions(void) +{ + if (memblock.reserved.regions == memblock_reserved_init_regions) + return 0; + + return memblock_free(__pa(memblock.reserved.regions), + sizeof(struct memblock_region) * memblock.reserved.max); } -static long memblock_regions_adjacent(struct memblock_region *rgn, - unsigned long r1, unsigned long r2) +/* + * Reserve memblock.reserved.regions + */ +int __init_memblock memblock_reserve_reserved_regions(void) { - u64 base1 = rgn->region[r1].base; - u64 size1 = rgn->region[r1].size; - u64 base2 = rgn->region[r2].base; - u64 size2 = rgn->region[r2].size; + if (memblock.reserved.regions == memblock_reserved_init_regions) + return 0; - return memblock_addrs_adjacent(base1, size1, base2, size2); + return memblock_reserve(__pa(memblock.reserved.regions), + sizeof(struct memblock_region) * memblock.reserved.max); } -static void memblock_remove_region(struct memblock_region *rgn, unsigned long r) +static void __init_memblock memblock_remove_region(struct memblock_type *type, unsigned long r) { unsigned long i; - for (i = r; i < rgn->cnt - 1; i++) { - rgn->region[i].base = rgn->region[i + 1].base; - rgn->region[i].size = rgn->region[i + 1].size; + for (i = r; i < type->cnt - 1; i++) { + type->regions[i].base = type->regions[i + 1].base; + type->regions[i].size = type->regions[i + 1].size; } - rgn->cnt--; + type->cnt--; } /* Assumption: base addr of region 1 < base addr of region 2 */ -static void memblock_coalesce_regions(struct memblock_region *rgn, +static void __init_memblock memblock_coalesce_regions(struct memblock_type *type, unsigned long r1, unsigned long r2) { - rgn->region[r1].size += rgn->region[r2].size; - memblock_remove_region(rgn, r2); + type->regions[r1].size += type->regions[r2].size; + memblock_remove_region(type, r2); } -void __init memblock_init(void) +/* Defined below but needed now */ +static long memblock_add_region(struct memblock_type *type, phys_addr_t base, phys_addr_t size); + +static int __init_memblock memblock_double_array(struct memblock_type *type) { - /* Create a dummy zero size MEMBLOCK which will get coalesced away later. - * This simplifies the memblock_add() code below... + struct memblock_region *new_array, *old_array; + phys_addr_t old_size, new_size, addr; + int use_slab = slab_is_available(); + + /* We don't allow resizing until we know about the reserved regions + * of memory that aren't suitable for allocation */ - memblock.memory.region[0].base = 0; - memblock.memory.region[0].size = 0; - memblock.memory.cnt = 1; + if (!memblock_can_resize) + return -1; - /* Ditto. */ - memblock.reserved.region[0].base = 0; - memblock.reserved.region[0].size = 0; - memblock.reserved.cnt = 1; -} + /* Calculate new doubled size */ + old_size = type->max * sizeof(struct memblock_region); + new_size = old_size << 1; + + /* Try to find some space for it. + * + * WARNING: We assume that either slab_is_available() and we use it or + * we use MEMBLOCK for allocations. That means that this is unsafe to use + * when bootmem is currently active (unless bootmem itself is implemented + * on top of MEMBLOCK which isn't the case yet) + * + * This should however not be an issue for now, as we currently only + * call into MEMBLOCK while it's still active, or much later when slab is + * active for memory hotplug operations + */ + if (use_slab) { + new_array = kmalloc(new_size, GFP_KERNEL); + addr = new_array == NULL ? MEMBLOCK_ERROR : __pa(new_array); + } else + addr = memblock_find_base(new_size, sizeof(phys_addr_t), 0, MEMBLOCK_ALLOC_ACCESSIBLE); + if (addr == MEMBLOCK_ERROR) { + pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n", + memblock_type_name(type), type->max, type->max * 2); + return -1; + } + new_array = __va(addr); -void __init memblock_analyze(void) -{ - int i; + memblock_dbg("memblock: %s array is doubled to %ld at [%#010llx-%#010llx]", + memblock_type_name(type), type->max * 2, (u64)addr, (u64)addr + new_size - 1); - memblock.memory.size = 0; + /* Found space, we now need to move the array over before + * we add the reserved region since it may be our reserved + * array itself that is full. + */ + memcpy(new_array, type->regions, old_size); + memset(new_array + type->max, 0, old_size); + old_array = type->regions; + type->regions = new_array; + type->max <<= 1; + + /* If we use SLAB that's it, we are done */ + if (use_slab) + return 0; - for (i = 0; i < memblock.memory.cnt; i++) - memblock.memory.size += memblock.memory.region[i].size; + /* Add the new reserved region now. Should not fail ! */ + BUG_ON(memblock_add_region(&memblock.reserved, addr, new_size) < 0); + + /* If the array wasn't our static init one, then free it. We only do + * that before SLAB is available as later on, we don't know whether + * to use kfree or free_bootmem_pages(). Shouldn't be a big deal + * anyways + */ + if (old_array != memblock_memory_init_regions && + old_array != memblock_reserved_init_regions) + memblock_free(__pa(old_array), old_size); + + return 0; } -static long memblock_add_region(struct memblock_region *rgn, u64 base, u64 size) +extern int __init_memblock __weak memblock_memory_can_coalesce(phys_addr_t addr1, phys_addr_t size1, + phys_addr_t addr2, phys_addr_t size2) +{ + return 1; +} + +static long __init_memblock memblock_add_region(struct memblock_type *type, phys_addr_t base, phys_addr_t size) { unsigned long coalesced = 0; long adjacent, i; - if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) { - rgn->region[0].base = base; - rgn->region[0].size = size; + if ((type->cnt == 1) && (type->regions[0].size == 0)) { + type->regions[0].base = base; + type->regions[0].size = size; return 0; } /* First try and coalesce this MEMBLOCK with another. */ - for (i = 0; i < rgn->cnt; i++) { - u64 rgnbase = rgn->region[i].base; - u64 rgnsize = rgn->region[i].size; + for (i = 0; i < type->cnt; i++) { + phys_addr_t rgnbase = type->regions[i].base; + phys_addr_t rgnsize = type->regions[i].size; if ((rgnbase == base) && (rgnsize == size)) /* Already have this region, so we're done */ return 0; adjacent = memblock_addrs_adjacent(base, size, rgnbase, rgnsize); + /* Check if arch allows coalescing */ + if (adjacent != 0 && type == &memblock.memory && + !memblock_memory_can_coalesce(base, size, rgnbase, rgnsize)) + break; if (adjacent > 0) { - rgn->region[i].base -= size; - rgn->region[i].size += size; + type->regions[i].base -= size; + type->regions[i].size += size; coalesced++; break; } else if (adjacent < 0) { - rgn->region[i].size += size; + type->regions[i].size += size; coalesced++; break; } } - if ((i < rgn->cnt - 1) && memblock_regions_adjacent(rgn, i, i+1)) { - memblock_coalesce_regions(rgn, i, i+1); + /* If we plugged a hole, we may want to also coalesce with the + * next region + */ + if ((i < type->cnt - 1) && memblock_regions_adjacent(type, i, i+1) && + ((type != &memblock.memory || memblock_memory_can_coalesce(type->regions[i].base, + type->regions[i].size, + type->regions[i+1].base, + type->regions[i+1].size)))) { + memblock_coalesce_regions(type, i, i+1); coalesced++; } if (coalesced) return coalesced; - if (rgn->cnt >= MAX_MEMBLOCK_REGIONS) + + /* If we are out of space, we fail. It's too late to resize the array + * but then this shouldn't have happened in the first place. + */ + if (WARN_ON(type->cnt >= type->max)) return -1; /* Couldn't coalesce the MEMBLOCK, so add it to the sorted table. */ - for (i = rgn->cnt - 1; i >= 0; i--) { - if (base < rgn->region[i].base) { - rgn->region[i+1].base = rgn->region[i].base; - rgn->region[i+1].size = rgn->region[i].size; + for (i = type->cnt - 1; i >= 0; i--) { + if (base < type->regions[i].base) { + type->regions[i+1].base = type->regions[i].base; + type->regions[i+1].size = type->regions[i].size; } else { - rgn->region[i+1].base = base; - rgn->region[i+1].size = size; + type->regions[i+1].base = base; + type->regions[i+1].size = size; break; } } - if (base < rgn->region[0].base) { - rgn->region[0].base = base; - rgn->region[0].size = size; + if (base < type->regions[0].base) { + type->regions[0].base = base; + type->regions[0].size = size; + } + type->cnt++; + + /* The array is full ? Try to resize it. If that fails, we undo + * our allocation and return an error + */ + if (type->cnt == type->max && memblock_double_array(type)) { + type->cnt--; + return -1; } - rgn->cnt++; return 0; } -long memblock_add(u64 base, u64 size) +long __init_memblock memblock_add(phys_addr_t base, phys_addr_t size) { - struct memblock_region *_rgn = &memblock.memory; - - /* On pSeries LPAR systems, the first MEMBLOCK is our RMO region. */ - if (base == 0) - memblock.rmo_size = size; - - return memblock_add_region(_rgn, base, size); + return memblock_add_region(&memblock.memory, base, size); } -static long __memblock_remove(struct memblock_region *rgn, u64 base, u64 size) +static long __init_memblock __memblock_remove(struct memblock_type *type, phys_addr_t base, phys_addr_t size) { - u64 rgnbegin, rgnend; - u64 end = base + size; + phys_addr_t rgnbegin, rgnend; + phys_addr_t end = base + size; int i; rgnbegin = rgnend = 0; /* supress gcc warnings */ /* Find the region where (base, size) belongs to */ - for (i=0; i < rgn->cnt; i++) { - rgnbegin = rgn->region[i].base; - rgnend = rgnbegin + rgn->region[i].size; + for (i=0; i < type->cnt; i++) { + rgnbegin = type->regions[i].base; + rgnend = rgnbegin + type->regions[i].size; if ((rgnbegin <= base) && (end <= rgnend)) break; } /* Didn't find the region */ - if (i == rgn->cnt) + if (i == type->cnt) return -1; /* Check to see if we are removing entire region */ if ((rgnbegin == base) && (rgnend == end)) { - memblock_remove_region(rgn, i); + memblock_remove_region(type, i); return 0; } /* Check to see if region is matching at the front */ if (rgnbegin == base) { - rgn->region[i].base = end; - rgn->region[i].size -= size; + type->regions[i].base = end; + type->regions[i].size -= size; return 0; } /* Check to see if the region is matching at the end */ if (rgnend == end) { - rgn->region[i].size -= size; + type->regions[i].size -= size; return 0; } @@ -249,208 +435,189 @@ static long __memblock_remove(struct memblock_region *rgn, u64 base, u64 size) * We need to split the entry - adjust the current one to the * beginging of the hole and add the region after hole. */ - rgn->region[i].size = base - rgn->region[i].base; - return memblock_add_region(rgn, end, rgnend - end); + type->regions[i].size = base - type->regions[i].base; + return memblock_add_region(type, end, rgnend - end); } -long memblock_remove(u64 base, u64 size) +long __init_memblock memblock_remove(phys_addr_t base, phys_addr_t size) { return __memblock_remove(&memblock.memory, base, size); } -long __init memblock_free(u64 base, u64 size) +long __init_memblock memblock_free(phys_addr_t base, phys_addr_t size) { return __memblock_remove(&memblock.reserved, base, size); } -long __init memblock_reserve(u64 base, u64 size) +long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size) { - struct memblock_region *_rgn = &memblock.reserved; + struct memblock_type *_rgn = &memblock.reserved; BUG_ON(0 == size); return memblock_add_region(_rgn, base, size); } -long memblock_overlaps_region(struct memblock_region *rgn, u64 base, u64 size) +phys_addr_t __init __memblock_alloc_base(phys_addr_t size, phys_addr_t align, phys_addr_t max_addr) { - unsigned long i; + phys_addr_t found; - for (i = 0; i < rgn->cnt; i++) { - u64 rgnbase = rgn->region[i].base; - u64 rgnsize = rgn->region[i].size; - if (memblock_addrs_overlap(base, size, rgnbase, rgnsize)) - break; - } + /* We align the size to limit fragmentation. Without this, a lot of + * small allocs quickly eat up the whole reserve array on sparc + */ + size = memblock_align_up(size, align); - return (i < rgn->cnt) ? i : -1; + found = memblock_find_base(size, align, 0, max_addr); + if (found != MEMBLOCK_ERROR && + memblock_add_region(&memblock.reserved, found, size) >= 0) + return found; + + return 0; } -static u64 memblock_align_down(u64 addr, u64 size) +phys_addr_t __init memblock_alloc_base(phys_addr_t size, phys_addr_t align, phys_addr_t max_addr) { - return addr & ~(size - 1); + phys_addr_t alloc; + + alloc = __memblock_alloc_base(size, align, max_addr); + + if (alloc == 0) + panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n", + (unsigned long long) size, (unsigned long long) max_addr); + + return alloc; } -static u64 memblock_align_up(u64 addr, u64 size) +phys_addr_t __init memblock_alloc(phys_addr_t size, phys_addr_t align) { - return (addr + (size - 1)) & ~(size - 1); + return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE); } -static u64 __init memblock_alloc_nid_unreserved(u64 start, u64 end, - u64 size, u64 align) + +/* + * Additional node-local allocators. Search for node memory is bottom up + * and walks memblock regions within that node bottom-up as well, but allocation + * within an memblock region is top-down. XXX I plan to fix that at some stage + * + * WARNING: Only available after early_node_map[] has been populated, + * on some architectures, that is after all the calls to add_active_range() + * have been done to populate it. + */ + +phys_addr_t __weak __init memblock_nid_range(phys_addr_t start, phys_addr_t end, int *nid) { - u64 base, res_base; - long j; +#ifdef CONFIG_ARCH_POPULATES_NODE_MAP + /* + * This code originates from sparc which really wants use to walk by addresses + * and returns the nid. This is not very convenient for early_pfn_map[] users + * as the map isn't sorted yet, and it really wants to be walked by nid. + * + * For now, I implement the inefficient method below which walks the early + * map multiple times. Eventually we may want to use an ARCH config option + * to implement a completely different method for both case. + */ + unsigned long start_pfn, end_pfn; + int i; - base = memblock_align_down((end - size), align); - while (start <= base) { - j = memblock_overlaps_region(&memblock.reserved, base, size); - if (j < 0) { - /* this area isn't reserved, take it */ - if (memblock_add_region(&memblock.reserved, base, size) < 0) - base = ~(u64)0; - return base; - } - res_base = memblock.reserved.region[j].base; - if (res_base < size) - break; - base = memblock_align_down(res_base - size, align); + for (i = 0; i < MAX_NUMNODES; i++) { + get_pfn_range_for_nid(i, &start_pfn, &end_pfn); + if (start < PFN_PHYS(start_pfn) || start >= PFN_PHYS(end_pfn)) + continue; + *nid = i; + return min(end, PFN_PHYS(end_pfn)); } +#endif + *nid = 0; - return ~(u64)0; + return end; } -static u64 __init memblock_alloc_nid_region(struct memblock_property *mp, - u64 (*nid_range)(u64, u64, int *), - u64 size, u64 align, int nid) +static phys_addr_t __init memblock_alloc_nid_region(struct memblock_region *mp, + phys_addr_t size, + phys_addr_t align, int nid) { - u64 start, end; + phys_addr_t start, end; start = mp->base; end = start + mp->size; start = memblock_align_up(start, align); while (start < end) { - u64 this_end; + phys_addr_t this_end; int this_nid; - this_end = nid_range(start, end, &this_nid); + this_end = memblock_nid_range(start, end, &this_nid); if (this_nid == nid) { - u64 ret = memblock_alloc_nid_unreserved(start, this_end, - size, align); - if (ret != ~(u64)0) + phys_addr_t ret = memblock_find_region(start, this_end, size, align); + if (ret != MEMBLOCK_ERROR && + memblock_add_region(&memblock.reserved, ret, size) >= 0) return ret; } start = this_end; } - return ~(u64)0; + return MEMBLOCK_ERROR; } -u64 __init memblock_alloc_nid(u64 size, u64 align, int nid, - u64 (*nid_range)(u64 start, u64 end, int *nid)) +phys_addr_t __init memblock_alloc_nid(phys_addr_t size, phys_addr_t align, int nid) { - struct memblock_region *mem = &memblock.memory; + struct memblock_type *mem = &memblock.memory; int i; BUG_ON(0 == size); + /* We align the size to limit fragmentation. Without this, a lot of + * small allocs quickly eat up the whole reserve array on sparc + */ size = memblock_align_up(size, align); + /* We do a bottom-up search for a region with the right + * nid since that's easier considering how memblock_nid_range() + * works + */ for (i = 0; i < mem->cnt; i++) { - u64 ret = memblock_alloc_nid_region(&mem->region[i], - nid_range, + phys_addr_t ret = memblock_alloc_nid_region(&mem->regions[i], size, align, nid); - if (ret != ~(u64)0) + if (ret != MEMBLOCK_ERROR) return ret; } - return memblock_alloc(size, align); -} - -u64 __init memblock_alloc(u64 size, u64 align) -{ - return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE); + return 0; } -u64 __init memblock_alloc_base(u64 size, u64 align, u64 max_addr) +phys_addr_t __init memblock_alloc_try_nid(phys_addr_t size, phys_addr_t align, int nid) { - u64 alloc; - - alloc = __memblock_alloc_base(size, align, max_addr); + phys_addr_t res = memblock_alloc_nid(size, align, nid); - if (alloc == 0) - panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n", - (unsigned long long) size, (unsigned long long) max_addr); - - return alloc; + if (res) + return res; + return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE); } -u64 __init __memblock_alloc_base(u64 size, u64 align, u64 max_addr) -{ - long i, j; - u64 base = 0; - u64 res_base; - - BUG_ON(0 == size); - size = memblock_align_up(size, align); - - /* On some platforms, make sure we allocate lowmem */ - /* Note that MEMBLOCK_REAL_LIMIT may be MEMBLOCK_ALLOC_ANYWHERE */ - if (max_addr == MEMBLOCK_ALLOC_ANYWHERE) - max_addr = MEMBLOCK_REAL_LIMIT; - - for (i = memblock.memory.cnt - 1; i >= 0; i--) { - u64 memblockbase = memblock.memory.region[i].base; - u64 memblocksize = memblock.memory.region[i].size; - - if (memblocksize < size) - continue; - if (max_addr == MEMBLOCK_ALLOC_ANYWHERE) - base = memblock_align_down(memblockbase + memblocksize - size, align); - else if (memblockbase < max_addr) { - base = min(memblockbase + memblocksize, max_addr); - base = memblock_align_down(base - size, align); - } else - continue; - - while (base && memblockbase <= base) { - j = memblock_overlaps_region(&memblock.reserved, base, size); - if (j < 0) { - /* this area isn't reserved, take it */ - if (memblock_add_region(&memblock.reserved, base, size) < 0) - return 0; - return base; - } - res_base = memblock.reserved.region[j].base; - if (res_base < size) - break; - base = memblock_align_down(res_base - size, align); - } - } - return 0; -} +/* + * Remaining API functions + */ /* You must call memblock_analyze() before this. */ -u64 __init memblock_phys_mem_size(void) +phys_addr_t __init memblock_phys_mem_size(void) { - return memblock.memory.size; + return memblock.memory_size; } -u64 memblock_end_of_DRAM(void) +phys_addr_t __init_memblock memblock_end_of_DRAM(void) { int idx = memblock.memory.cnt - 1; - return (memblock.memory.region[idx].base + memblock.memory.region[idx].size); + return (memblock.memory.regions[idx].base + memblock.memory.regions[idx].size); } /* You must call memblock_analyze() after this. */ -void __init memblock_enforce_memory_limit(u64 memory_limit) +void __init memblock_enforce_memory_limit(phys_addr_t memory_limit) { unsigned long i; - u64 limit; - struct memblock_property *p; + phys_addr_t limit; + struct memblock_region *p; if (!memory_limit) return; @@ -458,24 +625,21 @@ void __init memblock_enforce_memory_limit(u64 memory_limit) /* Truncate the memblock regions to satisfy the memory limit. */ limit = memory_limit; for (i = 0; i < memblock.memory.cnt; i++) { - if (limit > memblock.memory.region[i].size) { - limit -= memblock.memory.region[i].size; + if (limit > memblock.memory.regions[i].size) { + limit -= memblock.memory.regions[i].size; continue; } - memblock.memory.region[i].size = limit; + memblock.memory.regions[i].size = limit; memblock.memory.cnt = i + 1; break; } - if (memblock.memory.region[0].size < memblock.rmo_size) - memblock.rmo_size = memblock.memory.region[0].size; - memory_limit = memblock_end_of_DRAM(); /* And truncate any reserves above the limit also. */ for (i = 0; i < memblock.reserved.cnt; i++) { - p = &memblock.reserved.region[i]; + p = &memblock.reserved.regions[i]; if (p->base > memory_limit) p->size = 0; @@ -489,53 +653,190 @@ void __init memblock_enforce_memory_limit(u64 memory_limit) } } -int __init memblock_is_reserved(u64 addr) +static int __init_memblock memblock_search(struct memblock_type *type, phys_addr_t addr) +{ + unsigned int left = 0, right = type->cnt; + + do { + unsigned int mid = (right + left) / 2; + + if (addr < type->regions[mid].base) + right = mid; + else if (addr >= (type->regions[mid].base + + type->regions[mid].size)) + left = mid + 1; + else + return mid; + } while (left < right); + return -1; +} + +int __init memblock_is_reserved(phys_addr_t addr) +{ + return memblock_search(&memblock.reserved, addr) != -1; +} + +int __init_memblock memblock_is_memory(phys_addr_t addr) +{ + return memblock_search(&memblock.memory, addr) != -1; +} + +int __init_memblock memblock_is_region_memory(phys_addr_t base, phys_addr_t size) +{ + int idx = memblock_search(&memblock.reserved, base); + + if (idx == -1) + return 0; + return memblock.reserved.regions[idx].base <= base && + (memblock.reserved.regions[idx].base + + memblock.reserved.regions[idx].size) >= (base + size); +} + +int __init_memblock memblock_is_region_reserved(phys_addr_t base, phys_addr_t size) +{ + return memblock_overlaps_region(&memblock.reserved, base, size) >= 0; +} + + +void __init_memblock memblock_set_current_limit(phys_addr_t limit) { + memblock.current_limit = limit; +} + +static void __init_memblock memblock_dump(struct memblock_type *region, char *name) +{ + unsigned long long base, size; int i; - for (i = 0; i < memblock.reserved.cnt; i++) { - u64 upper = memblock.reserved.region[i].base + - memblock.reserved.region[i].size - 1; - if ((addr >= memblock.reserved.region[i].base) && (addr <= upper)) - return 1; + pr_info(" %s.cnt = 0x%lx\n", name, region->cnt); + + for (i = 0; i < region->cnt; i++) { + base = region->regions[i].base; + size = region->regions[i].size; + + pr_info(" %s[%#x]\t[%#016llx-%#016llx], %#llx bytes\n", + name, i, base, base + size - 1, size); } - return 0; } -int memblock_is_region_reserved(u64 base, u64 size) +void __init_memblock memblock_dump_all(void) { - return memblock_overlaps_region(&memblock.reserved, base, size) >= 0; + if (!memblock_debug) + return; + + pr_info("MEMBLOCK configuration:\n"); + pr_info(" memory size = 0x%llx\n", (unsigned long long)memblock.memory_size); + + memblock_dump(&memblock.memory, "memory"); + memblock_dump(&memblock.reserved, "reserved"); } -/* - * Given a <base, len>, find which memory regions belong to this range. - * Adjust the request and return a contiguous chunk. - */ -int memblock_find(struct memblock_property *res) +void __init memblock_analyze(void) { int i; - u64 rstart, rend; - rstart = res->base; - rend = rstart + res->size - 1; + /* Check marker in the unused last array entry */ + WARN_ON(memblock_memory_init_regions[INIT_MEMBLOCK_REGIONS].base + != (phys_addr_t)RED_INACTIVE); + WARN_ON(memblock_reserved_init_regions[INIT_MEMBLOCK_REGIONS].base + != (phys_addr_t)RED_INACTIVE); + + memblock.memory_size = 0; + + for (i = 0; i < memblock.memory.cnt; i++) + memblock.memory_size += memblock.memory.regions[i].size; + + /* We allow resizing from there */ + memblock_can_resize = 1; +} + +void __init memblock_init(void) +{ + static int init_done __initdata = 0; + + if (init_done) + return; + init_done = 1; + + /* Hookup the initial arrays */ + memblock.memory.regions = memblock_memory_init_regions; + memblock.memory.max = INIT_MEMBLOCK_REGIONS; + memblock.reserved.regions = memblock_reserved_init_regions; + memblock.reserved.max = INIT_MEMBLOCK_REGIONS; + + /* Write a marker in the unused last array entry */ + memblock.memory.regions[INIT_MEMBLOCK_REGIONS].base = (phys_addr_t)RED_INACTIVE; + memblock.reserved.regions[INIT_MEMBLOCK_REGIONS].base = (phys_addr_t)RED_INACTIVE; + + /* Create a dummy zero size MEMBLOCK which will get coalesced away later. + * This simplifies the memblock_add() code below... + */ + memblock.memory.regions[0].base = 0; + memblock.memory.regions[0].size = 0; + memblock.memory.cnt = 1; + + /* Ditto. */ + memblock.reserved.regions[0].base = 0; + memblock.reserved.regions[0].size = 0; + memblock.reserved.cnt = 1; + + memblock.current_limit = MEMBLOCK_ALLOC_ANYWHERE; +} + +static int __init early_memblock(char *p) +{ + if (p && strstr(p, "debug")) + memblock_debug = 1; + return 0; +} +early_param("memblock", early_memblock); + +#if defined(CONFIG_DEBUG_FS) && !defined(ARCH_DISCARD_MEMBLOCK) + +static int memblock_debug_show(struct seq_file *m, void *private) +{ + struct memblock_type *type = m->private; + struct memblock_region *reg; + int i; + + for (i = 0; i < type->cnt; i++) { + reg = &type->regions[i]; + seq_printf(m, "%4d: ", i); + if (sizeof(phys_addr_t) == 4) + seq_printf(m, "0x%08lx..0x%08lx\n", + (unsigned long)reg->base, + (unsigned long)(reg->base + reg->size - 1)); + else + seq_printf(m, "0x%016llx..0x%016llx\n", + (unsigned long long)reg->base, + (unsigned long long)(reg->base + reg->size - 1)); - for (i = 0; i < memblock.memory.cnt; i++) { - u64 start = memblock.memory.region[i].base; - u64 end = start + memblock.memory.region[i].size - 1; - - if (start > rend) - return -1; - - if ((end >= rstart) && (start < rend)) { - /* adjust the request */ - if (rstart < start) - rstart = start; - if (rend > end) - rend = end; - res->base = rstart; - res->size = rend - rstart + 1; - return 0; - } } - return -1; + return 0; +} + +static int memblock_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, memblock_debug_show, inode->i_private); } + +static const struct file_operations memblock_debug_fops = { + .open = memblock_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init memblock_init_debugfs(void) +{ + struct dentry *root = debugfs_create_dir("memblock", NULL); + if (!root) + return -ENXIO; + debugfs_create_file("memory", S_IRUGO, root, &memblock.memory, &memblock_debug_fops); + debugfs_create_file("reserved", S_IRUGO, root, &memblock.reserved, &memblock_debug_fops); + + return 0; +} +__initcall(memblock_init_debugfs); + +#endif /* CONFIG_DEBUG_FS */ diff --git a/mm/page_alloc.c b/mm/page_alloc.c index f12ad1836abe..2a362c52fdf4 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -21,6 +21,7 @@ #include <linux/pagemap.h> #include <linux/jiffies.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/compiler.h> #include <linux/kernel.h> #include <linux/kmemcheck.h> @@ -3636,6 +3637,41 @@ void __init free_bootmem_with_active_regions(int nid, } } +#ifdef CONFIG_HAVE_MEMBLOCK +u64 __init find_memory_core_early(int nid, u64 size, u64 align, + u64 goal, u64 limit) +{ + int i; + + /* Need to go over early_node_map to find out good range for node */ + for_each_active_range_index_in_nid(i, nid) { + u64 addr; + u64 ei_start, ei_last; + u64 final_start, final_end; + + ei_last = early_node_map[i].end_pfn; + ei_last <<= PAGE_SHIFT; + ei_start = early_node_map[i].start_pfn; + ei_start <<= PAGE_SHIFT; + + final_start = max(ei_start, goal); + final_end = min(ei_last, limit); + + if (final_start >= final_end) + continue; + + addr = memblock_find_in_range(final_start, final_end, size, align); + + if (addr == MEMBLOCK_ERROR) + continue; + + return addr; + } + + return MEMBLOCK_ERROR; +} +#endif + int __init add_from_early_node_map(struct range *range, int az, int nr_range, int nid) { @@ -3655,46 +3691,26 @@ int __init add_from_early_node_map(struct range *range, int az, void * __init __alloc_memory_core_early(int nid, u64 size, u64 align, u64 goal, u64 limit) { - int i; void *ptr; + u64 addr; - if (limit > get_max_mapped()) - limit = get_max_mapped(); - - /* need to go over early_node_map to find out good range for node */ - for_each_active_range_index_in_nid(i, nid) { - u64 addr; - u64 ei_start, ei_last; - - ei_last = early_node_map[i].end_pfn; - ei_last <<= PAGE_SHIFT; - ei_start = early_node_map[i].start_pfn; - ei_start <<= PAGE_SHIFT; - addr = find_early_area(ei_start, ei_last, - goal, limit, size, align); - - if (addr == -1ULL) - continue; + if (limit > memblock.current_limit) + limit = memblock.current_limit; -#if 0 - printk(KERN_DEBUG "alloc (nid=%d %llx - %llx) (%llx - %llx) %llx %llx => %llx\n", - nid, - ei_start, ei_last, goal, limit, size, - align, addr); -#endif + addr = find_memory_core_early(nid, size, align, goal, limit); - ptr = phys_to_virt(addr); - memset(ptr, 0, size); - reserve_early_without_check(addr, addr + size, "BOOTMEM"); - /* - * The min_count is set to 0 so that bootmem allocated blocks - * are never reported as leaks. - */ - kmemleak_alloc(ptr, size, 0, 0); - return ptr; - } + if (addr == MEMBLOCK_ERROR) + return NULL; - return NULL; + ptr = phys_to_virt(addr); + memset(ptr, 0, size); + memblock_x86_reserve_range(addr, addr + size, "BOOTMEM"); + /* + * The min_count is set to 0 so that bootmem allocated blocks + * are never reported as leaks. + */ + kmemleak_alloc(ptr, size, 0, 0); + return ptr; } #endif diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c index aa33fd67fa41..29d6cbffb283 100644 --- a/mm/sparse-vmemmap.c +++ b/mm/sparse-vmemmap.c @@ -220,18 +220,7 @@ void __init sparse_mem_maps_populate_node(struct page **map_map, if (vmemmap_buf_start) { /* need to free left buf */ -#ifdef CONFIG_NO_BOOTMEM - free_early(__pa(vmemmap_buf_start), __pa(vmemmap_buf_end)); - if (vmemmap_buf_start < vmemmap_buf) { - char name[15]; - - snprintf(name, sizeof(name), "MEMMAP %d", nodeid); - reserve_early_without_check(__pa(vmemmap_buf_start), - __pa(vmemmap_buf), name); - } -#else free_bootmem(__pa(vmemmap_buf), vmemmap_buf_end - vmemmap_buf); -#endif vmemmap_buf = NULL; vmemmap_buf_end = NULL; } diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 843bd4f4ffc9..5ad25e17b6cb 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -221,7 +221,8 @@ else cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ "$(if $(CONFIG_64BIT),64,32)" \ - "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ + "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \ + "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ "$(if $(part-of-module),1,0)" "$(@)"; endif endif diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index e67f05486087..1d7963f4ee79 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -270,6 +270,8 @@ if ($arch eq "x86_64") { } elsif ($arch eq "arm") { $alignment = 2; $section_type = '%progbits'; + $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_ARM_(CALL|PC24|THM_CALL)" . + "\\s+(__gnu_mcount_nc|mcount)\$"; } elsif ($arch eq "ia64") { $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$"; diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 7ab9174a8a84..8cc4733698a0 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -142,10 +142,9 @@ static int snd_pdacf_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->resource[0]->end = 16; - link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; - link->conf.Present = PRESENT_OPTION; + link->config_flags = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; + link->config_index = 1; + link->config_regs = PRESENT_OPTION; return pdacf_config(link); } @@ -217,7 +216,8 @@ static int pdacf_config(struct pcmcia_device *link) int ret; snd_printdd(KERN_DEBUG "pdacf_config called\n"); - link->conf.ConfigIndex = 0x5; + link->config_index = 0x5; + link->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; ret = pcmcia_request_io(link); if (ret) @@ -227,7 +227,7 @@ static int pdacf_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -287,9 +287,7 @@ MODULE_DEVICE_TABLE(pcmcia, snd_pdacf_ids); static struct pcmcia_driver pdacf_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "snd-pdaudiocf", - }, + .name = "snd-pdaudiocf", .probe = snd_pdacf_probe, .remove = snd_pdacf_detach, .id_table = snd_pdacf_ids, diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.h b/sound/pcmcia/pdaudiocf/pdaudiocf.h index 5cc3e4573074..bd26e092aead 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.h +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.h @@ -24,7 +24,6 @@ #include <sound/pcm.h> #include <asm/io.h> #include <linux/interrupt.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index a6edfc3be29a..80000d631f88 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -2,7 +2,7 @@ * Driver for Digigram VXpocket V2/440 soundcards * * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de> - * + * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -162,10 +162,9 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl, link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->resource[0]->end = 16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; + link->config_regs = PRESENT_OPTION; *chip_ret = vxp; return 0; @@ -234,7 +233,7 @@ static int vxpocket_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -359,9 +358,7 @@ MODULE_DEVICE_TABLE(pcmcia, vxp_ids); static struct pcmcia_driver vxp_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "snd-vxpocket", - }, + .name = "snd-vxpocket", .probe = vxpocket_probe, .remove = vxpocket_detach, .id_table = vxp_ids, diff --git a/sound/pcmcia/vx/vxpocket.h b/sound/pcmcia/vx/vxpocket.h index d9110669d042..13d658c1a216 100644 --- a/sound/pcmcia/vx/vxpocket.h +++ b/sound/pcmcia/vx/vxpocket.h @@ -23,7 +23,6 @@ #include <sound/vx_core.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/tools/perf/Documentation/perf-probe.txt b/tools/perf/Documentation/perf-probe.txt index 27d52dae5a43..62de1b7f4e76 100644 --- a/tools/perf/Documentation/perf-probe.txt +++ b/tools/perf/Documentation/perf-probe.txt @@ -16,7 +16,9 @@ or or 'perf probe' --list or -'perf probe' --line='FUNC[:RLN[+NUM|:RLN2]]|SRC:ALN[+NUM|:ALN2]' +'perf probe' [options] --line='FUNC[:RLN[+NUM|:RLN2]]|SRC:ALN[+NUM|:ALN2]' +or +'perf probe' [options] --vars='PROBEPOINT' DESCRIPTION ----------- @@ -31,6 +33,11 @@ OPTIONS --vmlinux=PATH:: Specify vmlinux path which has debuginfo (Dwarf binary). +-m:: +--module=MODNAME:: + Specify module name in which perf-probe searches probe points + or lines. + -s:: --source=PATH:: Specify path to kernel source. @@ -57,6 +64,15 @@ OPTIONS Show source code lines which can be probed. This needs an argument which specifies a range of the source code. (see LINE SYNTAX for detail) +-V:: +--vars=:: + Show available local variables at given probe point. The argument + syntax is same as PROBE SYNTAX, but NO ARGs. + +--externs:: + (Only for --vars) Show external defined variables in addition to local + variables. + -f:: --force:: Forcibly add events with existing name. diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c index 199d5e19554f..2e000c068cc5 100644 --- a/tools/perf/builtin-probe.c +++ b/tools/perf/builtin-probe.c @@ -50,14 +50,17 @@ static struct { bool list_events; bool force_add; bool show_lines; + bool show_vars; + bool show_ext_vars; + bool mod_events; int nevents; struct perf_probe_event events[MAX_PROBES]; struct strlist *dellist; struct line_range line_range; + const char *target_module; int max_probe_points; } params; - /* Parse an event definition. Note that any error must die. */ static int parse_probe_event(const char *str) { @@ -92,6 +95,7 @@ static int parse_probe_event_argv(int argc, const char **argv) len = 0; for (i = 0; i < argc; i++) len += sprintf(&buf[len], "%s ", argv[i]); + params.mod_events = true; ret = parse_probe_event(buf); free(buf); return ret; @@ -100,9 +104,10 @@ static int parse_probe_event_argv(int argc, const char **argv) static int opt_add_probe_event(const struct option *opt __used, const char *str, int unset __used) { - if (str) + if (str) { + params.mod_events = true; return parse_probe_event(str); - else + } else return 0; } @@ -110,6 +115,7 @@ static int opt_del_probe_event(const struct option *opt __used, const char *str, int unset __used) { if (str) { + params.mod_events = true; if (!params.dellist) params.dellist = strlist__new(true, NULL); strlist__add(params.dellist, str); @@ -130,6 +136,25 @@ static int opt_show_lines(const struct option *opt __used, return ret; } + +static int opt_show_vars(const struct option *opt __used, + const char *str, int unset __used) +{ + struct perf_probe_event *pev = ¶ms.events[params.nevents]; + int ret; + + if (!str) + return 0; + + ret = parse_probe_event(str); + if (!ret && pev->nargs != 0) { + pr_err(" Error: '--vars' doesn't accept arguments.\n"); + return -EINVAL; + } + params.show_vars = true; + + return ret; +} #endif static const char * const probe_usage[] = { @@ -138,7 +163,8 @@ static const char * const probe_usage[] = { "perf probe [<options>] --del '[GROUP:]EVENT' ...", "perf probe --list", #ifdef DWARF_SUPPORT - "perf probe --line 'LINEDESC'", + "perf probe [<options>] --line 'LINEDESC'", + "perf probe [<options>] --vars 'PROBEPOINT'", #endif NULL }; @@ -180,10 +206,17 @@ static const struct option options[] = { OPT_CALLBACK('L', "line", NULL, "FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]", "Show source code lines.", opt_show_lines), + OPT_CALLBACK('V', "vars", NULL, + "FUNC[@SRC][+OFF|%return|:RL|;PT]|SRC:AL|SRC;PT", + "Show accessible variables on PROBEDEF", opt_show_vars), + OPT_BOOLEAN('\0', "externs", ¶ms.show_ext_vars, + "Show external variables too (with --vars only)"), OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name, "file", "vmlinux pathname"), OPT_STRING('s', "source", &symbol_conf.source_prefix, "directory", "path to kernel source"), + OPT_STRING('m', "module", ¶ms.target_module, + "modname", "target module name"), #endif OPT__DRY_RUN(&probe_event_dry_run), OPT_INTEGER('\0', "max-probes", ¶ms.max_probe_points, @@ -217,7 +250,7 @@ int cmd_probe(int argc, const char **argv, const char *prefix __used) usage_with_options(probe_usage, options); if (params.list_events) { - if (params.nevents != 0 || params.dellist) { + if (params.mod_events) { pr_err(" Error: Don't use --list with --add/--del.\n"); usage_with_options(probe_usage, options); } @@ -225,6 +258,10 @@ int cmd_probe(int argc, const char **argv, const char *prefix __used) pr_err(" Error: Don't use --list with --line.\n"); usage_with_options(probe_usage, options); } + if (params.show_vars) { + pr_err(" Error: Don't use --list with --vars.\n"); + usage_with_options(probe_usage, options); + } ret = show_perf_probe_events(); if (ret < 0) pr_err(" Error: Failed to show event list. (%d)\n", @@ -234,17 +271,35 @@ int cmd_probe(int argc, const char **argv, const char *prefix __used) #ifdef DWARF_SUPPORT if (params.show_lines) { - if (params.nevents != 0 || params.dellist) { - pr_warning(" Error: Don't use --line with" - " --add/--del.\n"); + if (params.mod_events) { + pr_err(" Error: Don't use --line with" + " --add/--del.\n"); + usage_with_options(probe_usage, options); + } + if (params.show_vars) { + pr_err(" Error: Don't use --line with --vars.\n"); usage_with_options(probe_usage, options); } - ret = show_line_range(¶ms.line_range); + ret = show_line_range(¶ms.line_range, params.target_module); if (ret < 0) pr_err(" Error: Failed to show lines. (%d)\n", ret); return ret; } + if (params.show_vars) { + if (params.mod_events) { + pr_err(" Error: Don't use --vars with" + " --add/--del.\n"); + usage_with_options(probe_usage, options); + } + ret = show_available_vars(params.events, params.nevents, + params.max_probe_points, + params.target_module, + params.show_ext_vars); + if (ret < 0) + pr_err(" Error: Failed to show vars. (%d)\n", ret); + return ret; + } #endif if (params.dellist) { @@ -258,8 +313,9 @@ int cmd_probe(int argc, const char **argv, const char *prefix __used) if (params.nevents) { ret = add_perf_probe_events(params.events, params.nevents, - params.force_add, - params.max_probe_points); + params.max_probe_points, + params.target_module, + params.force_add); if (ret < 0) { pr_err(" Error: Failed to add events. (%d)\n", ret); return ret; diff --git a/tools/perf/util/map.h b/tools/perf/util/map.h index 78575796d5f3..b397c0383728 100644 --- a/tools/perf/util/map.h +++ b/tools/perf/util/map.h @@ -215,6 +215,16 @@ struct symbol *map_groups__find_function_by_name(struct map_groups *self, return map_groups__find_symbol_by_name(self, MAP__FUNCTION, name, mapp, filter); } +static inline +struct symbol *machine__find_kernel_function_by_name(struct machine *self, + const char *name, + struct map **mapp, + symbol_filter_t filter) +{ + return map_groups__find_function_by_name(&self->kmaps, name, mapp, + filter); +} + int map_groups__fixup_overlappings(struct map_groups *self, struct map *map, int verbose, FILE *fp); diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index fcc16e4349df..3b6a5297bf16 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -74,10 +74,9 @@ static int e_snprintf(char *str, size_t size, const char *format, ...) static char *synthesize_perf_probe_point(struct perf_probe_point *pp); static struct machine machine; -/* Initialize symbol maps and path of vmlinux */ +/* Initialize symbol maps and path of vmlinux/modules */ static int init_vmlinux(void) { - struct dso *kernel; int ret; symbol_conf.sort_by_name = true; @@ -91,33 +90,61 @@ static int init_vmlinux(void) goto out; } - ret = machine__init(&machine, "/", 0); + ret = machine__init(&machine, "", HOST_KERNEL_ID); if (ret < 0) goto out; - kernel = dso__new_kernel(symbol_conf.vmlinux_name); - if (kernel == NULL) - die("Failed to create kernel dso."); - - ret = __machine__create_kernel_maps(&machine, kernel); - if (ret < 0) - pr_debug("Failed to create kernel maps.\n"); - + if (machine__create_kernel_maps(&machine) < 0) { + pr_debug("machine__create_kernel_maps "); + goto out; + } out: if (ret < 0) pr_warning("Failed to init vmlinux path.\n"); return ret; } +static struct symbol *__find_kernel_function_by_name(const char *name, + struct map **mapp) +{ + return machine__find_kernel_function_by_name(&machine, name, mapp, + NULL); +} + +const char *kernel_get_module_path(const char *module) +{ + struct dso *dso; + + if (module) { + list_for_each_entry(dso, &machine.kernel_dsos, node) { + if (strncmp(dso->short_name + 1, module, + dso->short_name_len - 2) == 0) + goto found; + } + pr_debug("Failed to find module %s.\n", module); + return NULL; + } else { + dso = machine.vmlinux_maps[MAP__FUNCTION]->dso; + if (dso__load_vmlinux_path(dso, + machine.vmlinux_maps[MAP__FUNCTION], NULL) < 0) { + pr_debug("Failed to load kernel map.\n"); + return NULL; + } + } +found: + return dso->long_name; +} + #ifdef DWARF_SUPPORT -static int open_vmlinux(void) +static int open_vmlinux(const char *module) { - if (map__load(machine.vmlinux_maps[MAP__FUNCTION], NULL) < 0) { - pr_debug("Failed to load kernel map.\n"); - return -EINVAL; + const char *path = kernel_get_module_path(module); + if (!path) { + pr_err("Failed to find path of %s module", module ?: "kernel"); + return -ENOENT; } - pr_debug("Try to open %s\n", machine.vmlinux_maps[MAP__FUNCTION]->dso->long_name); - return open(machine.vmlinux_maps[MAP__FUNCTION]->dso->long_name, O_RDONLY); + pr_debug("Try to open %s\n", path); + return open(path, O_RDONLY); } /* @@ -125,20 +152,19 @@ static int open_vmlinux(void) * Currently only handles kprobes. */ static int kprobe_convert_to_perf_probe(struct probe_trace_point *tp, - struct perf_probe_point *pp) + struct perf_probe_point *pp) { struct symbol *sym; - int fd, ret = -ENOENT; + struct map *map; + u64 addr; + int ret = -ENOENT; - sym = map__find_symbol_by_name(machine.vmlinux_maps[MAP__FUNCTION], - tp->symbol, NULL); + sym = __find_kernel_function_by_name(tp->symbol, &map); if (sym) { - fd = open_vmlinux(); - if (fd >= 0) { - ret = find_perf_probe_point(fd, - sym->start + tp->offset, pp); - close(fd); - } + addr = map->unmap_ip(map, sym->start + tp->offset); + pr_debug("try to find %s+%ld@%llx\n", tp->symbol, + tp->offset, addr); + ret = find_perf_probe_point((unsigned long)addr, pp); } if (ret <= 0) { pr_debug("Failed to find corresponding probes from " @@ -156,12 +182,12 @@ static int kprobe_convert_to_perf_probe(struct probe_trace_point *tp, /* Try to find perf_probe_event with debuginfo */ static int try_to_find_probe_trace_events(struct perf_probe_event *pev, struct probe_trace_event **tevs, - int max_tevs) + int max_tevs, const char *module) { bool need_dwarf = perf_probe_event_need_dwarf(pev); int fd, ntevs; - fd = open_vmlinux(); + fd = open_vmlinux(module); if (fd < 0) { if (need_dwarf) { pr_warning("Failed to open debuginfo file.\n"); @@ -300,7 +326,7 @@ error: * Show line-range always requires debuginfo to find source file and * line number. */ -int show_line_range(struct line_range *lr) +int show_line_range(struct line_range *lr, const char *module) { int l = 1; struct line_node *ln; @@ -313,7 +339,7 @@ int show_line_range(struct line_range *lr) if (ret < 0) return ret; - fd = open_vmlinux(); + fd = open_vmlinux(module); if (fd < 0) { pr_warning("Failed to open debuginfo file.\n"); return fd; @@ -378,11 +404,84 @@ end: return ret; } +static int show_available_vars_at(int fd, struct perf_probe_event *pev, + int max_vls, bool externs) +{ + char *buf; + int ret, i; + struct str_node *node; + struct variable_list *vls = NULL, *vl; + + buf = synthesize_perf_probe_point(&pev->point); + if (!buf) + return -EINVAL; + pr_debug("Searching variables at %s\n", buf); + + ret = find_available_vars_at(fd, pev, &vls, max_vls, externs); + if (ret > 0) { + /* Some variables were found */ + fprintf(stdout, "Available variables at %s\n", buf); + for (i = 0; i < ret; i++) { + vl = &vls[i]; + /* + * A probe point might be converted to + * several trace points. + */ + fprintf(stdout, "\t@<%s+%lu>\n", vl->point.symbol, + vl->point.offset); + free(vl->point.symbol); + if (vl->vars) { + strlist__for_each(node, vl->vars) + fprintf(stdout, "\t\t%s\n", node->s); + strlist__delete(vl->vars); + } else + fprintf(stdout, "(No variables)\n"); + } + free(vls); + } else + pr_err("Failed to find variables at %s (%d)\n", buf, ret); + + free(buf); + return ret; +} + +/* Show available variables on given probe point */ +int show_available_vars(struct perf_probe_event *pevs, int npevs, + int max_vls, const char *module, bool externs) +{ + int i, fd, ret = 0; + + ret = init_vmlinux(); + if (ret < 0) + return ret; + + fd = open_vmlinux(module); + if (fd < 0) { + pr_warning("Failed to open debuginfo file.\n"); + return fd; + } + + setup_pager(); + + for (i = 0; i < npevs && ret >= 0; i++) + ret = show_available_vars_at(fd, &pevs[i], max_vls, externs); + + close(fd); + return ret; +} + #else /* !DWARF_SUPPORT */ static int kprobe_convert_to_perf_probe(struct probe_trace_point *tp, - struct perf_probe_point *pp) + struct perf_probe_point *pp) { + struct symbol *sym; + + sym = __find_kernel_function_by_name(tp->symbol, NULL); + if (!sym) { + pr_err("Failed to find symbol %s in kernel.\n", tp->symbol); + return -ENOENT; + } pp->function = strdup(tp->symbol); if (pp->function == NULL) return -ENOMEM; @@ -394,7 +493,7 @@ static int kprobe_convert_to_perf_probe(struct probe_trace_point *tp, static int try_to_find_probe_trace_events(struct perf_probe_event *pev, struct probe_trace_event **tevs __unused, - int max_tevs __unused) + int max_tevs __unused, const char *mod __unused) { if (perf_probe_event_need_dwarf(pev)) { pr_warning("Debuginfo-analysis is not supported.\n"); @@ -403,12 +502,19 @@ static int try_to_find_probe_trace_events(struct perf_probe_event *pev, return 0; } -int show_line_range(struct line_range *lr __unused) +int show_line_range(struct line_range *lr __unused, const char *module __unused) { pr_warning("Debuginfo-analysis is not supported.\n"); return -ENOSYS; } +int show_available_vars(struct perf_probe_event *pevs __unused, + int npevs __unused, int max_vls __unused, + const char *module __unused, bool externs __unused) +{ + pr_warning("Debuginfo-analysis is not supported.\n"); + return -ENOSYS; +} #endif int parse_line_range_desc(const char *arg, struct line_range *lr) @@ -1087,7 +1193,7 @@ error: } static int convert_to_perf_probe_event(struct probe_trace_event *tev, - struct perf_probe_event *pev) + struct perf_probe_event *pev) { char buf[64] = ""; int i, ret; @@ -1516,14 +1622,14 @@ static int __add_probe_trace_events(struct perf_probe_event *pev, static int convert_to_probe_trace_events(struct perf_probe_event *pev, struct probe_trace_event **tevs, - int max_tevs) + int max_tevs, const char *module) { struct symbol *sym; int ret = 0, i; struct probe_trace_event *tev; /* Convert perf_probe_event with debuginfo */ - ret = try_to_find_probe_trace_events(pev, tevs, max_tevs); + ret = try_to_find_probe_trace_events(pev, tevs, max_tevs, module); if (ret != 0) return ret; @@ -1572,8 +1678,7 @@ static int convert_to_probe_trace_events(struct perf_probe_event *pev, } /* Currently just checking function name from symbol map */ - sym = map__find_symbol_by_name(machine.vmlinux_maps[MAP__FUNCTION], - tev->point.symbol, NULL); + sym = __find_kernel_function_by_name(tev->point.symbol, NULL); if (!sym) { pr_warning("Kernel symbol \'%s\' not found.\n", tev->point.symbol); @@ -1596,7 +1701,7 @@ struct __event_package { }; int add_perf_probe_events(struct perf_probe_event *pevs, int npevs, - bool force_add, int max_tevs) + int max_tevs, const char *module, bool force_add) { int i, j, ret; struct __event_package *pkgs; @@ -1617,7 +1722,9 @@ int add_perf_probe_events(struct perf_probe_event *pevs, int npevs, pkgs[i].pev = &pevs[i]; /* Convert with or without debuginfo */ ret = convert_to_probe_trace_events(pkgs[i].pev, - &pkgs[i].tevs, max_tevs); + &pkgs[i].tevs, + max_tevs, + module); if (ret < 0) goto end; pkgs[i].ntevs = ret; diff --git a/tools/perf/util/probe-event.h b/tools/perf/util/probe-event.h index 5af39243a25b..5accbedfea37 100644 --- a/tools/perf/util/probe-event.h +++ b/tools/perf/util/probe-event.h @@ -90,6 +90,12 @@ struct line_range { struct list_head line_list; /* Visible lines */ }; +/* List of variables */ +struct variable_list { + struct probe_trace_point point; /* Actual probepoint */ + struct strlist *vars; /* Available variables */ +}; + /* Command string to events */ extern int parse_perf_probe_command(const char *cmd, struct perf_probe_event *pev); @@ -109,12 +115,18 @@ extern void clear_perf_probe_event(struct perf_probe_event *pev); /* Command string to line-range */ extern int parse_line_range_desc(const char *cmd, struct line_range *lr); +/* Internal use: Return kernel/module path */ +extern const char *kernel_get_module_path(const char *module); extern int add_perf_probe_events(struct perf_probe_event *pevs, int npevs, - bool force_add, int max_probe_points); + int max_probe_points, const char *module, + bool force_add); extern int del_perf_probe_events(struct strlist *dellist); extern int show_perf_probe_events(void); -extern int show_line_range(struct line_range *lr); +extern int show_line_range(struct line_range *lr, const char *module); +extern int show_available_vars(struct perf_probe_event *pevs, int npevs, + int max_probe_points, const char *module, + bool externs); /* Maximum index number of event-name postfix */ diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 32b81f707ff5..c20bd52833aa 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -116,6 +116,101 @@ static void line_list__free(struct list_head *head) } } +/* Dwarf FL wrappers */ + +static int __linux_kernel_find_elf(Dwfl_Module *mod, + void **userdata, + const char *module_name, + Dwarf_Addr base, + char **file_name, Elf **elfp) +{ + int fd; + const char *path = kernel_get_module_path(module_name); + + if (path) { + fd = open(path, O_RDONLY); + if (fd >= 0) { + *file_name = strdup(path); + return fd; + } + } + /* If failed, try to call standard method */ + return dwfl_linux_kernel_find_elf(mod, userdata, module_name, base, + file_name, elfp); +} + +static char *debuginfo_path; /* Currently dummy */ + +static const Dwfl_Callbacks offline_callbacks = { + .find_debuginfo = dwfl_standard_find_debuginfo, + .debuginfo_path = &debuginfo_path, + + .section_address = dwfl_offline_section_address, + + /* We use this table for core files too. */ + .find_elf = dwfl_build_id_find_elf, +}; + +static const Dwfl_Callbacks kernel_callbacks = { + .find_debuginfo = dwfl_standard_find_debuginfo, + .debuginfo_path = &debuginfo_path, + + .find_elf = __linux_kernel_find_elf, + .section_address = dwfl_linux_kernel_module_section_address, +}; + +/* Get a Dwarf from offline image */ +static Dwarf *dwfl_init_offline_dwarf(int fd, Dwfl **dwflp, Dwarf_Addr *bias) +{ + Dwfl_Module *mod; + Dwarf *dbg = NULL; + + if (!dwflp) + return NULL; + + *dwflp = dwfl_begin(&offline_callbacks); + if (!*dwflp) + return NULL; + + mod = dwfl_report_offline(*dwflp, "", "", fd); + if (!mod) + goto error; + + dbg = dwfl_module_getdwarf(mod, bias); + if (!dbg) { +error: + dwfl_end(*dwflp); + *dwflp = NULL; + } + return dbg; +} + +/* Get a Dwarf from live kernel image */ +static Dwarf *dwfl_init_live_kernel_dwarf(Dwarf_Addr addr, Dwfl **dwflp, + Dwarf_Addr *bias) +{ + Dwarf *dbg; + + if (!dwflp) + return NULL; + + *dwflp = dwfl_begin(&kernel_callbacks); + if (!*dwflp) + return NULL; + + /* Load the kernel dwarves: Don't care the result here */ + dwfl_linux_kernel_report_kernel(*dwflp); + dwfl_linux_kernel_report_modules(*dwflp); + + dbg = dwfl_addrdwarf(*dwflp, addr, bias); + /* Here, check whether we could get a real dwarf */ + if (!dbg) { + dwfl_end(*dwflp); + *dwflp = NULL; + } + return dbg; +} + /* Dwarf wrappers */ /* Find the realpath of the target file. */ @@ -160,26 +255,44 @@ static bool die_compare_name(Dwarf_Die *dw_die, const char *tname) return name ? (strcmp(tname, name) == 0) : false; } -/* Get type die, but skip qualifiers and typedef */ -static Dwarf_Die *die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem) +/* Get type die */ +static Dwarf_Die *die_get_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem) { Dwarf_Attribute attr; + + if (dwarf_attr_integrate(vr_die, DW_AT_type, &attr) && + dwarf_formref_die(&attr, die_mem)) + return die_mem; + else + return NULL; +} + +/* Get a type die, but skip qualifiers */ +static Dwarf_Die *__die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem) +{ int tag; do { - if (dwarf_attr(vr_die, DW_AT_type, &attr) == NULL || - dwarf_formref_die(&attr, die_mem) == NULL) - return NULL; - - tag = dwarf_tag(die_mem); - vr_die = die_mem; + vr_die = die_get_type(vr_die, die_mem); + if (!vr_die) + break; + tag = dwarf_tag(vr_die); } while (tag == DW_TAG_const_type || tag == DW_TAG_restrict_type || tag == DW_TAG_volatile_type || - tag == DW_TAG_shared_type || - tag == DW_TAG_typedef); + tag == DW_TAG_shared_type); + + return vr_die; +} - return die_mem; +/* Get a type die, but skip qualifiers and typedef */ +static Dwarf_Die *die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem) +{ + do { + vr_die = __die_get_real_type(vr_die, die_mem); + } while (vr_die && dwarf_tag(vr_die) == DW_TAG_typedef); + + return vr_die; } static bool die_is_signed_type(Dwarf_Die *tp_die) @@ -320,25 +433,35 @@ static Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, return die_find_child(sp_die, __die_find_inline_cb, &addr, die_mem); } +struct __find_variable_param { + const char *name; + Dwarf_Addr addr; +}; + static int __die_find_variable_cb(Dwarf_Die *die_mem, void *data) { - const char *name = data; + struct __find_variable_param *fvp = data; int tag; tag = dwarf_tag(die_mem); if ((tag == DW_TAG_formal_parameter || tag == DW_TAG_variable) && - die_compare_name(die_mem, name)) + die_compare_name(die_mem, fvp->name)) return DIE_FIND_CB_FOUND; - return DIE_FIND_CB_CONTINUE; + if (dwarf_haspc(die_mem, fvp->addr)) + return DIE_FIND_CB_CONTINUE; + else + return DIE_FIND_CB_SIBLING; } -/* Find a variable called 'name' */ -static Dwarf_Die *die_find_variable(Dwarf_Die *sp_die, const char *name, - Dwarf_Die *die_mem) +/* Find a variable called 'name' at given address */ +static Dwarf_Die *die_find_variable_at(Dwarf_Die *sp_die, const char *name, + Dwarf_Addr addr, Dwarf_Die *die_mem) { - return die_find_child(sp_die, __die_find_variable_cb, (void *)name, + struct __find_variable_param fvp = { .name = name, .addr = addr}; + + return die_find_child(sp_die, __die_find_variable_cb, (void *)&fvp, die_mem); } @@ -361,6 +484,60 @@ static Dwarf_Die *die_find_member(Dwarf_Die *st_die, const char *name, die_mem); } +/* Get the name of given variable DIE */ +static int die_get_typename(Dwarf_Die *vr_die, char *buf, int len) +{ + Dwarf_Die type; + int tag, ret, ret2; + const char *tmp = ""; + + if (__die_get_real_type(vr_die, &type) == NULL) + return -ENOENT; + + tag = dwarf_tag(&type); + if (tag == DW_TAG_array_type || tag == DW_TAG_pointer_type) + tmp = "*"; + else if (tag == DW_TAG_subroutine_type) { + /* Function pointer */ + ret = snprintf(buf, len, "(function_type)"); + return (ret >= len) ? -E2BIG : ret; + } else { + if (!dwarf_diename(&type)) + return -ENOENT; + if (tag == DW_TAG_union_type) + tmp = "union "; + else if (tag == DW_TAG_structure_type) + tmp = "struct "; + /* Write a base name */ + ret = snprintf(buf, len, "%s%s", tmp, dwarf_diename(&type)); + return (ret >= len) ? -E2BIG : ret; + } + ret = die_get_typename(&type, buf, len); + if (ret > 0) { + ret2 = snprintf(buf + ret, len - ret, "%s", tmp); + ret = (ret2 >= len - ret) ? -E2BIG : ret2 + ret; + } + return ret; +} + +/* Get the name and type of given variable DIE, stored as "type\tname" */ +static int die_get_varname(Dwarf_Die *vr_die, char *buf, int len) +{ + int ret, ret2; + + ret = die_get_typename(vr_die, buf, len); + if (ret < 0) { + pr_debug("Failed to get type, make it unknown.\n"); + ret = snprintf(buf, len, "(unknown_type)"); + } + if (ret > 0) { + ret2 = snprintf(buf + ret, len - ret, "\t%s", + dwarf_diename(vr_die)); + ret = (ret2 >= len - ret) ? -E2BIG : ret2 + ret; + } + return ret; +} + /* * Probe finder related functions */ @@ -374,8 +551,13 @@ static struct probe_trace_arg_ref *alloc_trace_arg_ref(long offs) return ref; } -/* Show a location */ -static int convert_variable_location(Dwarf_Die *vr_die, struct probe_finder *pf) +/* + * Convert a location into trace_arg. + * If tvar == NULL, this just checks variable can be converted. + */ +static int convert_variable_location(Dwarf_Die *vr_die, Dwarf_Addr addr, + Dwarf_Op *fb_ops, + struct probe_trace_arg *tvar) { Dwarf_Attribute attr; Dwarf_Op *op; @@ -384,20 +566,23 @@ static int convert_variable_location(Dwarf_Die *vr_die, struct probe_finder *pf) Dwarf_Word offs = 0; bool ref = false; const char *regs; - struct probe_trace_arg *tvar = pf->tvar; int ret; + if (dwarf_attr(vr_die, DW_AT_external, &attr) != NULL) + goto static_var; + /* TODO: handle more than 1 exprs */ if (dwarf_attr(vr_die, DW_AT_location, &attr) == NULL || - dwarf_getlocation_addr(&attr, pf->addr, &op, &nops, 1) <= 0 || + dwarf_getlocation_addr(&attr, addr, &op, &nops, 1) <= 0 || nops == 0) { /* TODO: Support const_value */ - pr_err("Failed to find the location of %s at this address.\n" - " Perhaps, it has been optimized out.\n", pf->pvar->var); return -ENOENT; } if (op->atom == DW_OP_addr) { +static_var: + if (!tvar) + return 0; /* Static variables on memory (not stack), make @varname */ ret = strlen(dwarf_diename(vr_die)); tvar->value = zalloc(ret + 2); @@ -412,14 +597,11 @@ static int convert_variable_location(Dwarf_Die *vr_die, struct probe_finder *pf) /* If this is based on frame buffer, set the offset */ if (op->atom == DW_OP_fbreg) { - if (pf->fb_ops == NULL) { - pr_warning("The attribute of frame base is not " - "supported.\n"); + if (fb_ops == NULL) return -ENOTSUP; - } ref = true; offs = op->number; - op = &pf->fb_ops[0]; + op = &fb_ops[0]; } if (op->atom >= DW_OP_breg0 && op->atom <= DW_OP_breg31) { @@ -435,13 +617,18 @@ static int convert_variable_location(Dwarf_Die *vr_die, struct probe_finder *pf) } else if (op->atom == DW_OP_regx) { regn = op->number; } else { - pr_warning("DW_OP %x is not supported.\n", op->atom); + pr_debug("DW_OP %x is not supported.\n", op->atom); return -ENOTSUP; } + if (!tvar) + return 0; + regs = get_arch_regstr(regn); if (!regs) { - pr_warning("Mapping for DWARF register number %u missing on this architecture.", regn); + /* This should be a bug in DWARF or this tool */ + pr_warning("Mapping for DWARF register number %u " + "missing on this architecture.", regn); return -ERANGE; } @@ -666,8 +853,14 @@ static int convert_variable(Dwarf_Die *vr_die, struct probe_finder *pf) pr_debug("Converting variable %s into trace event.\n", dwarf_diename(vr_die)); - ret = convert_variable_location(vr_die, pf); - if (ret == 0 && pf->pvar->field) { + ret = convert_variable_location(vr_die, pf->addr, pf->fb_ops, + pf->tvar); + if (ret == -ENOENT) + pr_err("Failed to find the location of %s at this address.\n" + " Perhaps, it has been optimized out.\n", pf->pvar->var); + else if (ret == -ENOTSUP) + pr_err("Sorry, we don't support this variable location yet.\n"); + else if (pf->pvar->field) { ret = convert_variable_fields(vr_die, pf->pvar->var, pf->pvar->field, &pf->tvar->ref, &die_mem); @@ -722,56 +915,39 @@ static int find_variable(Dwarf_Die *sp_die, struct probe_finder *pf) pr_debug("Searching '%s' variable in context.\n", pf->pvar->var); /* Search child die for local variables and parameters. */ - if (die_find_variable(sp_die, pf->pvar->var, &vr_die)) + if (die_find_variable_at(sp_die, pf->pvar->var, pf->addr, &vr_die)) ret = convert_variable(&vr_die, pf); else { /* Search upper class */ nscopes = dwarf_getscopes_die(sp_die, &scopes); - if (nscopes > 0) { - ret = dwarf_getscopevar(scopes, nscopes, pf->pvar->var, - 0, NULL, 0, 0, &vr_die); - if (ret >= 0) + while (nscopes-- > 1) { + pr_debug("Searching variables in %s\n", + dwarf_diename(&scopes[nscopes])); + /* We should check this scope, so give dummy address */ + if (die_find_variable_at(&scopes[nscopes], + pf->pvar->var, 0, + &vr_die)) { ret = convert_variable(&vr_die, pf); - else - ret = -ENOENT; + goto found; + } + } + if (scopes) free(scopes); - } else - ret = -ENOENT; + ret = -ENOENT; } +found: if (ret < 0) pr_warning("Failed to find '%s' in this function.\n", pf->pvar->var); return ret; } -/* Show a probe point to output buffer */ -static int convert_probe_point(Dwarf_Die *sp_die, struct probe_finder *pf) +/* Convert subprogram DIE to trace point */ +static int convert_to_trace_point(Dwarf_Die *sp_die, Dwarf_Addr paddr, + bool retprobe, struct probe_trace_point *tp) { - struct probe_trace_event *tev; Dwarf_Addr eaddr; - Dwarf_Die die_mem; const char *name; - int ret, i; - Dwarf_Attribute fb_attr; - size_t nops; - - if (pf->ntevs == pf->max_tevs) { - pr_warning("Too many( > %d) probe point found.\n", - pf->max_tevs); - return -ERANGE; - } - tev = &pf->tevs[pf->ntevs++]; - - /* If no real subprogram, find a real one */ - if (!sp_die || dwarf_tag(sp_die) != DW_TAG_subprogram) { - sp_die = die_find_real_subprogram(&pf->cu_die, - pf->addr, &die_mem); - if (!sp_die) { - pr_warning("Failed to find probe point in any " - "functions.\n"); - return -ENOENT; - } - } /* Copy the name of probe point */ name = dwarf_diename(sp_die); @@ -781,26 +957,45 @@ static int convert_probe_point(Dwarf_Die *sp_die, struct probe_finder *pf) dwarf_diename(sp_die)); return -ENOENT; } - tev->point.symbol = strdup(name); - if (tev->point.symbol == NULL) + tp->symbol = strdup(name); + if (tp->symbol == NULL) return -ENOMEM; - tev->point.offset = (unsigned long)(pf->addr - eaddr); + tp->offset = (unsigned long)(paddr - eaddr); } else /* This function has no name. */ - tev->point.offset = (unsigned long)pf->addr; + tp->offset = (unsigned long)paddr; /* Return probe must be on the head of a subprogram */ - if (pf->pev->point.retprobe) { - if (tev->point.offset != 0) { + if (retprobe) { + if (eaddr != paddr) { pr_warning("Return probe must be on the head of" " a real function\n"); return -EINVAL; } - tev->point.retprobe = true; + tp->retprobe = true; } - pr_debug("Probe point found: %s+%lu\n", tev->point.symbol, - tev->point.offset); + return 0; +} + +/* Call probe_finder callback with real subprogram DIE */ +static int call_probe_finder(Dwarf_Die *sp_die, struct probe_finder *pf) +{ + Dwarf_Die die_mem; + Dwarf_Attribute fb_attr; + size_t nops; + int ret; + + /* If no real subprogram, find a real one */ + if (!sp_die || dwarf_tag(sp_die) != DW_TAG_subprogram) { + sp_die = die_find_real_subprogram(&pf->cu_die, + pf->addr, &die_mem); + if (!sp_die) { + pr_warning("Failed to find probe point in any " + "functions.\n"); + return -ENOENT; + } + } /* Get the frame base attribute/ops */ dwarf_attr(sp_die, DW_AT_frame_base, &fb_attr); @@ -820,22 +1015,13 @@ static int convert_probe_point(Dwarf_Die *sp_die, struct probe_finder *pf) #endif } - /* Find each argument */ - tev->nargs = pf->pev->nargs; - tev->args = zalloc(sizeof(struct probe_trace_arg) * tev->nargs); - if (tev->args == NULL) - return -ENOMEM; - for (i = 0; i < pf->pev->nargs; i++) { - pf->pvar = &pf->pev->args[i]; - pf->tvar = &tev->args[i]; - ret = find_variable(sp_die, pf); - if (ret != 0) - return ret; - } + /* Call finder's callback handler */ + ret = pf->callback(sp_die, pf); /* *pf->fb_ops will be cached in libdw. Don't free it. */ pf->fb_ops = NULL; - return 0; + + return ret; } /* Find probe point from its line number */ @@ -871,7 +1057,7 @@ static int find_probe_point_by_line(struct probe_finder *pf) (int)i, lineno, (uintmax_t)addr); pf->addr = addr; - ret = convert_probe_point(NULL, pf); + ret = call_probe_finder(NULL, pf); /* Continuing, because target line might be inlined. */ } return ret; @@ -984,7 +1170,7 @@ static int find_probe_point_lazy(Dwarf_Die *sp_die, struct probe_finder *pf) (int)i, lineno, (unsigned long long)addr); pf->addr = addr; - ret = convert_probe_point(sp_die, pf); + ret = call_probe_finder(sp_die, pf); /* Continuing, because target line might be inlined. */ } /* TODO: deallocate lines, but how? */ @@ -1019,7 +1205,7 @@ static int probe_point_inline_cb(Dwarf_Die *in_die, void *data) pr_debug("found inline addr: 0x%jx\n", (uintmax_t)pf->addr); - param->retval = convert_probe_point(in_die, pf); + param->retval = call_probe_finder(in_die, pf); if (param->retval < 0) return DWARF_CB_ABORT; } @@ -1057,7 +1243,7 @@ static int probe_point_search_cb(Dwarf_Die *sp_die, void *data) } pf->addr += pp->offset; /* TODO: Check the address in this function */ - param->retval = convert_probe_point(sp_die, pf); + param->retval = call_probe_finder(sp_die, pf); } } else { struct dwarf_callback_param _param = {.data = (void *)pf, @@ -1079,90 +1265,276 @@ static int find_probe_point_by_func(struct probe_finder *pf) return _param.retval; } -/* Find probe_trace_events specified by perf_probe_event from debuginfo */ -int find_probe_trace_events(int fd, struct perf_probe_event *pev, - struct probe_trace_event **tevs, int max_tevs) +/* Find probe points from debuginfo */ +static int find_probes(int fd, struct probe_finder *pf) { - struct probe_finder pf = {.pev = pev, .max_tevs = max_tevs}; - struct perf_probe_point *pp = &pev->point; + struct perf_probe_point *pp = &pf->pev->point; Dwarf_Off off, noff; size_t cuhl; Dwarf_Die *diep; - Dwarf *dbg; + Dwarf *dbg = NULL; + Dwfl *dwfl; + Dwarf_Addr bias; /* Currently ignored */ int ret = 0; - pf.tevs = zalloc(sizeof(struct probe_trace_event) * max_tevs); - if (pf.tevs == NULL) - return -ENOMEM; - *tevs = pf.tevs; - pf.ntevs = 0; - - dbg = dwarf_begin(fd, DWARF_C_READ); + dbg = dwfl_init_offline_dwarf(fd, &dwfl, &bias); if (!dbg) { pr_warning("No dwarf info found in the vmlinux - " "please rebuild with CONFIG_DEBUG_INFO=y.\n"); - free(pf.tevs); - *tevs = NULL; return -EBADF; } #if _ELFUTILS_PREREQ(0, 142) /* Get the call frame information from this dwarf */ - pf.cfi = dwarf_getcfi(dbg); + pf->cfi = dwarf_getcfi(dbg); #endif off = 0; - line_list__init(&pf.lcache); + line_list__init(&pf->lcache); /* Loop on CUs (Compilation Unit) */ while (!dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL) && ret >= 0) { /* Get the DIE(Debugging Information Entry) of this CU */ - diep = dwarf_offdie(dbg, off + cuhl, &pf.cu_die); + diep = dwarf_offdie(dbg, off + cuhl, &pf->cu_die); if (!diep) continue; /* Check if target file is included. */ if (pp->file) - pf.fname = cu_find_realpath(&pf.cu_die, pp->file); + pf->fname = cu_find_realpath(&pf->cu_die, pp->file); else - pf.fname = NULL; + pf->fname = NULL; - if (!pp->file || pf.fname) { + if (!pp->file || pf->fname) { if (pp->function) - ret = find_probe_point_by_func(&pf); + ret = find_probe_point_by_func(pf); else if (pp->lazy_line) - ret = find_probe_point_lazy(NULL, &pf); + ret = find_probe_point_lazy(NULL, pf); else { - pf.lno = pp->line; - ret = find_probe_point_by_line(&pf); + pf->lno = pp->line; + ret = find_probe_point_by_line(pf); } } off = noff; } - line_list__free(&pf.lcache); - dwarf_end(dbg); + line_list__free(&pf->lcache); + if (dwfl) + dwfl_end(dwfl); - return (ret < 0) ? ret : pf.ntevs; + return ret; +} + +/* Add a found probe point into trace event list */ +static int add_probe_trace_event(Dwarf_Die *sp_die, struct probe_finder *pf) +{ + struct trace_event_finder *tf = + container_of(pf, struct trace_event_finder, pf); + struct probe_trace_event *tev; + int ret, i; + + /* Check number of tevs */ + if (tf->ntevs == tf->max_tevs) { + pr_warning("Too many( > %d) probe point found.\n", + tf->max_tevs); + return -ERANGE; + } + tev = &tf->tevs[tf->ntevs++]; + + ret = convert_to_trace_point(sp_die, pf->addr, pf->pev->point.retprobe, + &tev->point); + if (ret < 0) + return ret; + + pr_debug("Probe point found: %s+%lu\n", tev->point.symbol, + tev->point.offset); + + /* Find each argument */ + tev->nargs = pf->pev->nargs; + tev->args = zalloc(sizeof(struct probe_trace_arg) * tev->nargs); + if (tev->args == NULL) + return -ENOMEM; + for (i = 0; i < pf->pev->nargs; i++) { + pf->pvar = &pf->pev->args[i]; + pf->tvar = &tev->args[i]; + ret = find_variable(sp_die, pf); + if (ret != 0) + return ret; + } + + return 0; +} + +/* Find probe_trace_events specified by perf_probe_event from debuginfo */ +int find_probe_trace_events(int fd, struct perf_probe_event *pev, + struct probe_trace_event **tevs, int max_tevs) +{ + struct trace_event_finder tf = { + .pf = {.pev = pev, .callback = add_probe_trace_event}, + .max_tevs = max_tevs}; + int ret; + + /* Allocate result tevs array */ + *tevs = zalloc(sizeof(struct probe_trace_event) * max_tevs); + if (*tevs == NULL) + return -ENOMEM; + + tf.tevs = *tevs; + tf.ntevs = 0; + + ret = find_probes(fd, &tf.pf); + if (ret < 0) { + free(*tevs); + *tevs = NULL; + return ret; + } + + return (ret < 0) ? ret : tf.ntevs; +} + +#define MAX_VAR_LEN 64 + +/* Collect available variables in this scope */ +static int collect_variables_cb(Dwarf_Die *die_mem, void *data) +{ + struct available_var_finder *af = data; + struct variable_list *vl; + char buf[MAX_VAR_LEN]; + int tag, ret; + + vl = &af->vls[af->nvls - 1]; + + tag = dwarf_tag(die_mem); + if (tag == DW_TAG_formal_parameter || + tag == DW_TAG_variable) { + ret = convert_variable_location(die_mem, af->pf.addr, + af->pf.fb_ops, NULL); + if (ret == 0) { + ret = die_get_varname(die_mem, buf, MAX_VAR_LEN); + pr_debug2("Add new var: %s\n", buf); + if (ret > 0) + strlist__add(vl->vars, buf); + } + } + + if (af->child && dwarf_haspc(die_mem, af->pf.addr)) + return DIE_FIND_CB_CONTINUE; + else + return DIE_FIND_CB_SIBLING; +} + +/* Add a found vars into available variables list */ +static int add_available_vars(Dwarf_Die *sp_die, struct probe_finder *pf) +{ + struct available_var_finder *af = + container_of(pf, struct available_var_finder, pf); + struct variable_list *vl; + Dwarf_Die die_mem, *scopes = NULL; + int ret, nscopes; + + /* Check number of tevs */ + if (af->nvls == af->max_vls) { + pr_warning("Too many( > %d) probe point found.\n", af->max_vls); + return -ERANGE; + } + vl = &af->vls[af->nvls++]; + + ret = convert_to_trace_point(sp_die, pf->addr, pf->pev->point.retprobe, + &vl->point); + if (ret < 0) + return ret; + + pr_debug("Probe point found: %s+%lu\n", vl->point.symbol, + vl->point.offset); + + /* Find local variables */ + vl->vars = strlist__new(true, NULL); + if (vl->vars == NULL) + return -ENOMEM; + af->child = true; + die_find_child(sp_die, collect_variables_cb, (void *)af, &die_mem); + + /* Find external variables */ + if (!af->externs) + goto out; + /* Don't need to search child DIE for externs. */ + af->child = false; + nscopes = dwarf_getscopes_die(sp_die, &scopes); + while (nscopes-- > 1) + die_find_child(&scopes[nscopes], collect_variables_cb, + (void *)af, &die_mem); + if (scopes) + free(scopes); + +out: + if (strlist__empty(vl->vars)) { + strlist__delete(vl->vars); + vl->vars = NULL; + } + + return ret; +} + +/* Find available variables at given probe point */ +int find_available_vars_at(int fd, struct perf_probe_event *pev, + struct variable_list **vls, int max_vls, + bool externs) +{ + struct available_var_finder af = { + .pf = {.pev = pev, .callback = add_available_vars}, + .max_vls = max_vls, .externs = externs}; + int ret; + + /* Allocate result vls array */ + *vls = zalloc(sizeof(struct variable_list) * max_vls); + if (*vls == NULL) + return -ENOMEM; + + af.vls = *vls; + af.nvls = 0; + + ret = find_probes(fd, &af.pf); + if (ret < 0) { + /* Free vlist for error */ + while (af.nvls--) { + if (af.vls[af.nvls].point.symbol) + free(af.vls[af.nvls].point.symbol); + if (af.vls[af.nvls].vars) + strlist__delete(af.vls[af.nvls].vars); + } + free(af.vls); + *vls = NULL; + return ret; + } + + return (ret < 0) ? ret : af.nvls; } /* Reverse search */ -int find_perf_probe_point(int fd, unsigned long addr, - struct perf_probe_point *ppt) +int find_perf_probe_point(unsigned long addr, struct perf_probe_point *ppt) { Dwarf_Die cudie, spdie, indie; - Dwarf *dbg; + Dwarf *dbg = NULL; + Dwfl *dwfl = NULL; Dwarf_Line *line; - Dwarf_Addr laddr, eaddr; + Dwarf_Addr laddr, eaddr, bias = 0; const char *tmp; int lineno, ret = 0; bool found = false; - dbg = dwarf_begin(fd, DWARF_C_READ); - if (!dbg) - return -EBADF; + /* Open the live linux kernel */ + dbg = dwfl_init_live_kernel_dwarf(addr, &dwfl, &bias); + if (!dbg) { + pr_warning("No dwarf info found in the vmlinux - " + "please rebuild with CONFIG_DEBUG_INFO=y.\n"); + ret = -EINVAL; + goto end; + } + /* Adjust address with bias */ + addr += bias; /* Find cu die */ - if (!dwarf_addrdie(dbg, (Dwarf_Addr)addr, &cudie)) { + if (!dwarf_addrdie(dbg, (Dwarf_Addr)addr - bias, &cudie)) { + pr_warning("No CU DIE is found at %lx\n", addr); ret = -EINVAL; goto end; } @@ -1225,7 +1597,8 @@ found: } end: - dwarf_end(dbg); + if (dwfl) + dwfl_end(dwfl); if (ret >= 0) ret = found ? 1 : 0; return ret; @@ -1358,6 +1731,8 @@ static int line_range_search_cb(Dwarf_Die *sp_die, void *data) struct line_finder *lf = param->data; struct line_range *lr = lf->lr; + pr_debug("find (%lx) %s\n", dwarf_dieoffset(sp_die), + dwarf_diename(sp_die)); if (dwarf_tag(sp_die) == DW_TAG_subprogram && die_compare_name(sp_die, lr->function)) { lf->fname = dwarf_decl_file(sp_die); @@ -1401,10 +1776,12 @@ int find_line_range(int fd, struct line_range *lr) Dwarf_Off off = 0, noff; size_t cuhl; Dwarf_Die *diep; - Dwarf *dbg; + Dwarf *dbg = NULL; + Dwfl *dwfl; + Dwarf_Addr bias; /* Currently ignored */ const char *comp_dir; - dbg = dwarf_begin(fd, DWARF_C_READ); + dbg = dwfl_init_offline_dwarf(fd, &dwfl, &bias); if (!dbg) { pr_warning("No dwarf info found in the vmlinux - " "please rebuild with CONFIG_DEBUG_INFO=y.\n"); @@ -1450,8 +1827,7 @@ int find_line_range(int fd, struct line_range *lr) } pr_debug("path: %s\n", lr->path); - dwarf_end(dbg); - + dwfl_end(dwfl); return (ret < 0) ? ret : lf.found; } diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h index 4507d519f183..bba69d455699 100644 --- a/tools/perf/util/probe-finder.h +++ b/tools/perf/util/probe-finder.h @@ -22,20 +22,27 @@ extern int find_probe_trace_events(int fd, struct perf_probe_event *pev, int max_tevs); /* Find a perf_probe_point from debuginfo */ -extern int find_perf_probe_point(int fd, unsigned long addr, +extern int find_perf_probe_point(unsigned long addr, struct perf_probe_point *ppt); +/* Find a line range */ extern int find_line_range(int fd, struct line_range *lr); +/* Find available variables */ +extern int find_available_vars_at(int fd, struct perf_probe_event *pev, + struct variable_list **vls, int max_points, + bool externs); + #include <dwarf.h> #include <libdw.h> +#include <libdwfl.h> #include <version.h> struct probe_finder { struct perf_probe_event *pev; /* Target probe event */ - struct probe_trace_event *tevs; /* Result trace events */ - int ntevs; /* Number of trace events */ - int max_tevs; /* Max number of trace events */ + + /* Callback when a probe point is found */ + int (*callback)(Dwarf_Die *sp_die, struct probe_finder *pf); /* For function searching */ int lno; /* Line number */ @@ -53,6 +60,22 @@ struct probe_finder { struct probe_trace_arg *tvar; /* Current result variable */ }; +struct trace_event_finder { + struct probe_finder pf; + struct probe_trace_event *tevs; /* Found trace events */ + int ntevs; /* Number of trace events */ + int max_tevs; /* Max number of trace events */ +}; + +struct available_var_finder { + struct probe_finder pf; + struct variable_list *vls; /* Found variable lists */ + int nvls; /* Number of variable lists */ + int max_vls; /* Max no. of variable lists */ + bool externs; /* Find external vars too */ + bool child; /* Search child scopes */ +}; + struct line_finder { struct line_range *lr; /* Target line range */ diff --git a/tools/perf/util/ui/browser.c b/tools/perf/util/ui/browser.c index 6d0df809a2ed..8bc010edca25 100644 --- a/tools/perf/util/ui/browser.c +++ b/tools/perf/util/ui/browser.c @@ -1,4 +1,3 @@ -#include <slang.h> #include "libslang.h" #include <linux/compiler.h> #include <linux/list.h> |