[POWERPC] Fix oprofile support for e500 in arch/powerpc

Fixed a compile error in building the 85xx support with oprofile, and in
the process cleaned up some issues with the fsl_booke performance monitor
code.

* Reorganized FSL Book-E performance monitoring code so that the 7450
  wouldn't be built if the e500 was, and cleaned it up so it was more
  self-contained.

* Added a cpu_setup function for FSL Book-E.  The original
  cpu_setup function prototype had no arguments, assuming that
  the reg_setup function would copy the required information into
  variables which represented the registers.  This was silly for
  e500, since it has 1 register per counter (rather than 3 for
  all counters), so the code has been restructured to have
  cpu_setup take the current counter config array as an argument,
  with op_powerpc_setup() invoking op_powerpc_cpu_setup() through
  on_each_cpu(), and op_powerpc_cpu_setup() invoking the
  model-specific cpu_setup function with an argument.  The
  argument is ignored on all other platforms at present.

* Fixed a confusing line where a trinary operator only had two
  arguments

Signed-off-by: Andrew Fleming <afleming@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

2 files changed, 85 insertions, 15 deletions

diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h
index 5b33994cd488..07a10e590c1d 100644
--- a/include/asm-powerpc/oprofile_impl.h
+++ b/include/asm-powerpc/oprofile_impl.h
@@ -42,7 +42,7 @@ struct op_powerpc_model {
 	void (*reg_setup) (struct op_counter_config *,
 			   struct op_system_config *,
 			   int num_counters);
-	void (*cpu_setup) (void *);
+	void (*cpu_setup) (struct op_counter_config *);
 	void (*start) (struct op_counter_config *);
 	void (*stop) (void);
 	void (*handle_interrupt) (struct pt_regs *,
@@ -121,7 +121,90 @@ static inline void ctr_write(unsigned int i, unsigned int val)
 		break;
 	}
 }
-#endif /* !CONFIG_FSL_BOOKE */
+#else /* CONFIG_FSL_BOOKE */
+static inline u32 get_pmlca(int ctr)
+{
+	u32 pmlca;
+
+	switch (ctr) {
+		case 0:
+			pmlca = mfpmr(PMRN_PMLCA0);
+			break;
+		case 1:
+			pmlca = mfpmr(PMRN_PMLCA1);
+			break;
+		case 2:
+			pmlca = mfpmr(PMRN_PMLCA2);
+			break;
+		case 3:
+			pmlca = mfpmr(PMRN_PMLCA3);
+			break;
+		default:
+			panic("Bad ctr number\n");
+	}
+
+	return pmlca;
+}
+
+static inline void set_pmlca(int ctr, u32 pmlca)
+{
+	switch (ctr) {
+		case 0:
+			mtpmr(PMRN_PMLCA0, pmlca);
+			break;
+		case 1:
+			mtpmr(PMRN_PMLCA1, pmlca);
+			break;
+		case 2:
+			mtpmr(PMRN_PMLCA2, pmlca);
+			break;
+		case 3:
+			mtpmr(PMRN_PMLCA3, pmlca);
+			break;
+		default:
+			panic("Bad ctr number\n");
+	}
+}
+
+static inline unsigned int ctr_read(unsigned int i)
+{
+	switch(i) {
+		case 0:
+			return mfpmr(PMRN_PMC0);
+		case 1:
+			return mfpmr(PMRN_PMC1);
+		case 2:
+			return mfpmr(PMRN_PMC2);
+		case 3:
+			return mfpmr(PMRN_PMC3);
+		default:
+			return 0;
+	}
+}
+
+static inline void ctr_write(unsigned int i, unsigned int val)
+{
+	switch(i) {
+		case 0:
+			mtpmr(PMRN_PMC0, val);
+			break;
+		case 1:
+			mtpmr(PMRN_PMC1, val);
+			break;
+		case 2:
+			mtpmr(PMRN_PMC2, val);
+			break;
+		case 3:
+			mtpmr(PMRN_PMC3, val);
+			break;
+		default:
+			break;
+	}
+}
+
+
+#endif /* CONFIG_FSL_BOOKE */
+
 
 extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth);
 
diff --git a/include/asm-powerpc/pmc.h b/include/asm-powerpc/pmc.h
index 07d6a4279319..8588be68e0ad 100644
--- a/include/asm-powerpc/pmc.h
+++ b/include/asm-powerpc/pmc.h
@@ -32,18 +32,5 @@ void release_pmc_hardware(void);
 void power4_enable_pmcs(void);
 #endif
 
-#ifdef CONFIG_FSL_BOOKE
-void init_pmc_stop(int ctr);
-void set_pmc_event(int ctr, int event);
-void set_pmc_user_kernel(int ctr, int user, int kernel);
-void set_pmc_marked(int ctr, int mark0, int mark1);
-void pmc_start_ctr(int ctr, int enable);
-void pmc_start_ctrs(int enable);
-void pmc_stop_ctrs(void);
-void dump_pmcs(void);
-
-extern struct op_powerpc_model op_model_fsl_booke;
-#endif
-
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_PMC_H */