summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorJeff Garzik <jgarzik@pobox.com>2005-10-30 01:58:18 -0500
committerJeff Garzik <jgarzik@pobox.com>2005-10-30 01:58:18 -0500
commitf0612bbc41f65f5a684f69d714a1a17a6f0f40c5 (patch)
tree8c070070bb355843cfa4635643e9da7c2c4cd44a /drivers
parentb0c4e148bd591629749d02a8fbc8d81c26d548cf (diff)
parent81cfb8864c73230eb1c37753aba517db15cf4d8f (diff)
Merge branch 'upstream'
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/acpi_memhotplug.c5
-rw-r--r--drivers/base/Makefile1
-rw-r--r--drivers/base/init.c2
-rw-r--r--drivers/base/memory.c452
-rw-r--r--drivers/md/dm-crypt.c12
-rw-r--r--drivers/net/wireless/airo.c7
-rw-r--r--drivers/scsi/ahci.c9
-rw-r--r--drivers/scsi/arm/scsi.h6
-rw-r--r--drivers/scsi/libata-core.c46
-rw-r--r--drivers/scsi/sata_mv.c18
-rw-r--r--drivers/scsi/sata_sil24.c8
-rw-r--r--drivers/scsi/sg.c17
-rw-r--r--drivers/scsi/st.c10
-rw-r--r--drivers/usb/misc/usbtest.c7
14 files changed, 497 insertions, 103 deletions
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 01a1bd239263..2143609d2936 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -200,8 +200,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
* Note: Assume that this function returns zero on success
*/
result = add_memory(mem_device->start_addr,
- (mem_device->end_addr - mem_device->start_addr) + 1,
- mem_device->read_write_attribute);
+ (mem_device->end_addr - mem_device->start_addr) + 1);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "\nadd_memory failed\n"));
mem_device->state = MEMORY_INVALID_STATE;
@@ -259,7 +258,7 @@ static int acpi_memory_disable_device(struct acpi_memory_device *mem_device)
* Ask the VM to offline this memory range.
* Note: Assume that this function returns zero on success
*/
- result = remove_memory(start, len, attr);
+ result = remove_memory(start, len);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Hot-Remove failed.\n"));
return_VALUE(result);
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 66d9c4643fc1..f12898d53078 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -7,6 +7,7 @@ obj-y := core.o sys.o bus.o dd.o \
obj-y += power/
obj-$(CONFIG_FW_LOADER) += firmware_class.o
obj-$(CONFIG_NUMA) += node.o
+obj-$(CONFIG_MEMORY_HOTPLUG) += memory.o
ifeq ($(CONFIG_DEBUG_DRIVER),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/base/init.c b/drivers/base/init.c
index 84e604e25c4f..c648914b9cde 100644
--- a/drivers/base/init.c
+++ b/drivers/base/init.c
@@ -9,6 +9,7 @@
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/memory.h>
#include "base.h"
@@ -33,5 +34,6 @@ void __init driver_init(void)
platform_bus_init();
system_bus_init();
cpu_dev_init();
+ memory_dev_init();
attribute_container_init();
}
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
new file mode 100644
index 000000000000..b7ddd651d664
--- /dev/null
+++ b/drivers/base/memory.c
@@ -0,0 +1,452 @@
+/*
+ * drivers/base/memory.c - basic Memory class support
+ *
+ * Written by Matt Tolentino <matthew.e.tolentino@intel.com>
+ * Dave Hansen <haveblue@us.ibm.com>
+ *
+ * This file provides the necessary infrastructure to represent
+ * a SPARSEMEM-memory-model system's physical memory in /sysfs.
+ * All arch-independent code that assumes MEMORY_HOTPLUG requires
+ * SPARSEMEM should be contained here, or in mm/memory_hotplug.c.
+ */
+
+#include <linux/sysdev.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h> /* capable() */
+#include <linux/topology.h>
+#include <linux/device.h>
+#include <linux/memory.h>
+#include <linux/kobject.h>
+#include <linux/memory_hotplug.h>
+#include <linux/mm.h>
+#include <asm/atomic.h>
+#include <asm/uaccess.h>
+
+#define MEMORY_CLASS_NAME "memory"
+
+static struct sysdev_class memory_sysdev_class = {
+ set_kset_name(MEMORY_CLASS_NAME),
+};
+EXPORT_SYMBOL(memory_sysdev_class);
+
+static char *memory_hotplug_name(struct kset *kset, struct kobject *kobj)
+{
+ return MEMORY_CLASS_NAME;
+}
+
+static int memory_hotplug(struct kset *kset, struct kobject *kobj, char **envp,
+ int num_envp, char *buffer, int buffer_size)
+{
+ int retval = 0;
+
+ return retval;
+}
+
+static struct kset_hotplug_ops memory_hotplug_ops = {
+ .name = memory_hotplug_name,
+ .hotplug = memory_hotplug,
+};
+
+static struct notifier_block *memory_chain;
+
+static int register_memory_notifier(struct notifier_block *nb)
+{
+ return notifier_chain_register(&memory_chain, nb);
+}
+
+static void unregister_memory_notifier(struct notifier_block *nb)
+{
+ notifier_chain_unregister(&memory_chain, nb);
+}
+
+/*
+ * register_memory - Setup a sysfs device for a memory block
+ */
+static int
+register_memory(struct memory_block *memory, struct mem_section *section,
+ struct node *root)
+{
+ int error;
+
+ memory->sysdev.cls = &memory_sysdev_class;
+ memory->sysdev.id = __section_nr(section);
+
+ error = sysdev_register(&memory->sysdev);
+
+ if (root && !error)
+ error = sysfs_create_link(&root->sysdev.kobj,
+ &memory->sysdev.kobj,
+ kobject_name(&memory->sysdev.kobj));
+
+ return error;
+}
+
+static void
+unregister_memory(struct memory_block *memory, struct mem_section *section,
+ struct node *root)
+{
+ BUG_ON(memory->sysdev.cls != &memory_sysdev_class);
+ BUG_ON(memory->sysdev.id != __section_nr(section));
+
+ sysdev_unregister(&memory->sysdev);
+ if (root)
+ sysfs_remove_link(&root->sysdev.kobj,
+ kobject_name(&memory->sysdev.kobj));
+}
+
+/*
+ * use this as the physical section index that this memsection
+ * uses.
+ */
+
+static ssize_t show_mem_phys_index(struct sys_device *dev, char *buf)
+{
+ struct memory_block *mem =
+ container_of(dev, struct memory_block, sysdev);
+ return sprintf(buf, "%08lx\n", mem->phys_index);
+}
+
+/*
+ * online, offline, going offline, etc.
+ */
+static ssize_t show_mem_state(struct sys_device *dev, char *buf)
+{
+ struct memory_block *mem =
+ container_of(dev, struct memory_block, sysdev);
+ ssize_t len = 0;
+
+ /*
+ * We can probably put these states in a nice little array
+ * so that they're not open-coded
+ */
+ switch (mem->state) {
+ case MEM_ONLINE:
+ len = sprintf(buf, "online\n");
+ break;
+ case MEM_OFFLINE:
+ len = sprintf(buf, "offline\n");
+ break;
+ case MEM_GOING_OFFLINE:
+ len = sprintf(buf, "going-offline\n");
+ break;
+ default:
+ len = sprintf(buf, "ERROR-UNKNOWN-%ld\n",
+ mem->state);
+ WARN_ON(1);
+ break;
+ }
+
+ return len;
+}
+
+static inline int memory_notify(unsigned long val, void *v)
+{
+ return notifier_call_chain(&memory_chain, val, v);
+}
+
+/*
+ * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is
+ * OK to have direct references to sparsemem variables in here.
+ */
+static int
+memory_block_action(struct memory_block *mem, unsigned long action)
+{
+ int i;
+ unsigned long psection;
+ unsigned long start_pfn, start_paddr;
+ struct page *first_page;
+ int ret;
+ int old_state = mem->state;
+
+ psection = mem->phys_index;
+ first_page = pfn_to_page(psection << PFN_SECTION_SHIFT);
+
+ /*
+ * The probe routines leave the pages reserved, just
+ * as the bootmem code does. Make sure they're still
+ * that way.
+ */
+ if (action == MEM_ONLINE) {
+ for (i = 0; i < PAGES_PER_SECTION; i++) {
+ if (PageReserved(first_page+i))
+ continue;
+
+ printk(KERN_WARNING "section number %ld page number %d "
+ "not reserved, was it already online? \n",
+ psection, i);
+ return -EBUSY;
+ }
+ }
+
+ switch (action) {
+ case MEM_ONLINE:
+ start_pfn = page_to_pfn(first_page);
+ ret = online_pages(start_pfn, PAGES_PER_SECTION);
+ break;
+ case MEM_OFFLINE:
+ mem->state = MEM_GOING_OFFLINE;
+ memory_notify(MEM_GOING_OFFLINE, NULL);
+ start_paddr = page_to_pfn(first_page) << PAGE_SHIFT;
+ ret = remove_memory(start_paddr,
+ PAGES_PER_SECTION << PAGE_SHIFT);
+ if (ret) {
+ mem->state = old_state;
+ break;
+ }
+ memory_notify(MEM_MAPPING_INVALID, NULL);
+ break;
+ default:
+ printk(KERN_WARNING "%s(%p, %ld) unknown action: %ld\n",
+ __FUNCTION__, mem, action, action);
+ WARN_ON(1);
+ ret = -EINVAL;
+ }
+ /*
+ * For now, only notify on successful memory operations
+ */
+ if (!ret)
+ memory_notify(action, NULL);
+
+ return ret;
+}
+
+static int memory_block_change_state(struct memory_block *mem,
+ unsigned long to_state, unsigned long from_state_req)
+{
+ int ret = 0;
+ down(&mem->state_sem);
+
+ if (mem->state != from_state_req) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = memory_block_action(mem, to_state);
+ if (!ret)
+ mem->state = to_state;
+
+out:
+ up(&mem->state_sem);
+ return ret;
+}
+
+static ssize_t
+store_mem_state(struct sys_device *dev, const char *buf, size_t count)
+{
+ struct memory_block *mem;
+ unsigned int phys_section_nr;
+ int ret = -EINVAL;
+
+ mem = container_of(dev, struct memory_block, sysdev);
+ phys_section_nr = mem->phys_index;
+
+ if (!valid_section_nr(phys_section_nr))
+ goto out;
+
+ if (!strncmp(buf, "online", min((int)count, 6)))
+ ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE);
+ else if(!strncmp(buf, "offline", min((int)count, 7)))
+ ret = memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE);
+out:
+ if (ret)
+ return ret;
+ return count;
+}
+
+/*
+ * phys_device is a bad name for this. What I really want
+ * is a way to differentiate between memory ranges that
+ * are part of physical devices that constitute
+ * a complete removable unit or fru.
+ * i.e. do these ranges belong to the same physical device,
+ * s.t. if I offline all of these sections I can then
+ * remove the physical device?
+ */
+static ssize_t show_phys_device(struct sys_device *dev, char *buf)
+{
+ struct memory_block *mem =
+ container_of(dev, struct memory_block, sysdev);
+ return sprintf(buf, "%d\n", mem->phys_device);
+}
+
+static SYSDEV_ATTR(phys_index, 0444, show_mem_phys_index, NULL);
+static SYSDEV_ATTR(state, 0644, show_mem_state, store_mem_state);
+static SYSDEV_ATTR(phys_device, 0444, show_phys_device, NULL);
+
+#define mem_create_simple_file(mem, attr_name) \
+ sysdev_create_file(&mem->sysdev, &attr_##attr_name)
+#define mem_remove_simple_file(mem, attr_name) \
+ sysdev_remove_file(&mem->sysdev, &attr_##attr_name)
+
+/*
+ * Block size attribute stuff
+ */
+static ssize_t
+print_block_size(struct class *class, char *buf)
+{
+ return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
+}
+
+static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
+
+static int block_size_init(void)
+{
+ sysfs_create_file(&memory_sysdev_class.kset.kobj,
+ &class_attr_block_size_bytes.attr);
+ return 0;
+}
+
+/*
+ * Some architectures will have custom drivers to do this, and
+ * will not need to do it from userspace. The fake hot-add code
+ * as well as ppc64 will do all of their discovery in userspace
+ * and will require this interface.
+ */
+#ifdef CONFIG_ARCH_MEMORY_PROBE
+static ssize_t
+memory_probe_store(struct class *class, const char __user *buf, size_t count)
+{
+ u64 phys_addr;
+ int ret;
+
+ phys_addr = simple_strtoull(buf, NULL, 0);
+
+ ret = add_memory(phys_addr, PAGES_PER_SECTION << PAGE_SHIFT);
+
+ if (ret)
+ count = ret;
+
+ return count;
+}
+static CLASS_ATTR(probe, 0700, NULL, memory_probe_store);
+
+static int memory_probe_init(void)
+{
+ sysfs_create_file(&memory_sysdev_class.kset.kobj,
+ &class_attr_probe.attr);
+ return 0;
+}
+#else
+#define memory_probe_init(...) do {} while (0)
+#endif
+
+/*
+ * Note that phys_device is optional. It is here to allow for
+ * differentiation between which *physical* devices each
+ * section belongs to...
+ */
+
+static int add_memory_block(unsigned long node_id, struct mem_section *section,
+ unsigned long state, int phys_device)
+{
+ struct memory_block *mem = kzalloc(sizeof(*mem), GFP_KERNEL);
+ int ret = 0;
+
+ if (!mem)
+ return -ENOMEM;
+
+ mem->phys_index = __section_nr(section);
+ mem->state = state;
+ init_MUTEX(&mem->state_sem);
+ mem->phys_device = phys_device;
+
+ ret = register_memory(mem, section, NULL);
+ if (!ret)
+ ret = mem_create_simple_file(mem, phys_index);
+ if (!ret)
+ ret = mem_create_simple_file(mem, state);
+ if (!ret)
+ ret = mem_create_simple_file(mem, phys_device);
+
+ return ret;
+}
+
+/*
+ * For now, we have a linear search to go find the appropriate
+ * memory_block corresponding to a particular phys_index. If
+ * this gets to be a real problem, we can always use a radix
+ * tree or something here.
+ *
+ * This could be made generic for all sysdev classes.
+ */
+static struct memory_block *find_memory_block(struct mem_section *section)
+{
+ struct kobject *kobj;
+ struct sys_device *sysdev;
+ struct memory_block *mem;
+ char name[sizeof(MEMORY_CLASS_NAME) + 9 + 1];
+
+ /*
+ * This only works because we know that section == sysdev->id
+ * slightly redundant with sysdev_register()
+ */
+ sprintf(&name[0], "%s%d", MEMORY_CLASS_NAME, __section_nr(section));
+
+ kobj = kset_find_obj(&memory_sysdev_class.kset, name);
+ if (!kobj)
+ return NULL;
+
+ sysdev = container_of(kobj, struct sys_device, kobj);
+ mem = container_of(sysdev, struct memory_block, sysdev);
+
+ return mem;
+}
+
+int remove_memory_block(unsigned long node_id, struct mem_section *section,
+ int phys_device)
+{
+ struct memory_block *mem;
+
+ mem = find_memory_block(section);
+ mem_remove_simple_file(mem, phys_index);
+ mem_remove_simple_file(mem, state);
+ mem_remove_simple_file(mem, phys_device);
+ unregister_memory(mem, section, NULL);
+
+ return 0;
+}
+
+/*
+ * need an interface for the VM to add new memory regions,
+ * but without onlining it.
+ */
+int register_new_memory(struct mem_section *section)
+{
+ return add_memory_block(0, section, MEM_OFFLINE, 0);
+}
+
+int unregister_memory_section(struct mem_section *section)
+{
+ if (!valid_section(section))
+ return -EINVAL;
+
+ return remove_memory_block(0, section, 0);
+}
+
+/*
+ * Initialize the sysfs support for memory devices...
+ */
+int __init memory_dev_init(void)
+{
+ unsigned int i;
+ int ret;
+
+ memory_sysdev_class.kset.hotplug_ops = &memory_hotplug_ops;
+ ret = sysdev_class_register(&memory_sysdev_class);
+
+ /*
+ * Create entries for memory sections that were found
+ * during boot and have been initialized
+ */
+ for (i = 0; i < NR_MEM_SECTIONS; i++) {
+ if (!valid_section_nr(i))
+ continue;
+ add_memory_block(0, __nr_to_section(i), MEM_ONLINE, 0);
+ }
+
+ memory_probe_init();
+ block_size_init();
+
+ return ret;
+}
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 28c1a628621f..cf6631056683 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -15,7 +15,7 @@
#include <linux/crypto.h>
#include <linux/workqueue.h>
#include <asm/atomic.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <asm/page.h>
#include "dm.h"
@@ -164,9 +164,7 @@ static int crypt_iv_essiv_ctr(struct crypt_config *cc, struct dm_target *ti,
return -ENOMEM;
}
- sg.page = virt_to_page(cc->key);
- sg.offset = offset_in_page(cc->key);
- sg.length = cc->key_size;
+ sg_set_buf(&sg, cc->key, cc->key_size);
crypto_digest_digest(hash_tfm, &sg, 1, salt);
crypto_free_tfm(hash_tfm);
@@ -207,14 +205,12 @@ static void crypt_iv_essiv_dtr(struct crypt_config *cc)
static int crypt_iv_essiv_gen(struct crypt_config *cc, u8 *iv, sector_t sector)
{
- struct scatterlist sg = { NULL, };
+ struct scatterlist sg;
memset(iv, 0, cc->iv_size);
*(u64 *)iv = cpu_to_le64(sector);
- sg.page = virt_to_page(iv);
- sg.offset = offset_in_page(iv);
- sg.length = cc->iv_size;
+ sg_set_buf(&sg, iv, cc->iv_size);
crypto_cipher_encrypt((struct crypto_tfm *)cc->iv_gen_private,
&sg, &sg, cc->iv_size);
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 4c11699bad91..750c0167539c 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -35,6 +35,7 @@
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/bitops.h>
+#include <linux/scatterlist.h>
#include <asm/io.h>
#include <asm/system.h>
@@ -1590,11 +1591,9 @@ static void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct
aes_counter[12] = (u8)(counter >> 24);
counter++;
memcpy (plain, aes_counter, 16);
- sg[0].page = virt_to_page(plain);
- sg[0].offset = ((long) plain & ~PAGE_MASK);
- sg[0].length = 16;
+ sg_set_buf(sg, plain, 16);
crypto_cipher_encrypt(tfm, sg, sg, 16);
- cipher = kmap(sg[0].page) + sg[0].offset;
+ cipher = kmap(sg->page) + sg->offset;
for (j=0; (j<16) && (i< (sizeof(context->coeff)/sizeof(context->coeff[0]))); ) {
context->coeff[i++] = ntohl(*(u32 *)&cipher[j]);
j += 4;
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index cbab5868ffdf..3df74a08fe22 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -192,7 +192,6 @@ static void ahci_port_stop(struct ata_port *ap);
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static void ahci_qc_prep(struct ata_queued_cmd *qc);
static u8 ahci_check_status(struct ata_port *ap);
-static u8 ahci_check_err(struct ata_port *ap);
static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
static void ahci_remove_one (struct pci_dev *pdev);
@@ -221,7 +220,6 @@ static const struct ata_port_operations ahci_ops = {
.check_status = ahci_check_status,
.check_altstatus = ahci_check_status,
- .check_err = ahci_check_err,
.dev_select = ata_noop_dev_select,
.tf_read = ahci_tf_read,
@@ -466,13 +464,6 @@ static u8 ahci_check_status(struct ata_port *ap)
return readl(mmio + PORT_TFDATA) & 0xFF;
}
-static u8 ahci_check_err(struct ata_port *ap)
-{
- void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
-
- return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF;
-}
-
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ahci_port_priv *pp = ap->private_data;
diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h
index 48e1c4d9738b..19937640e2e7 100644
--- a/drivers/scsi/arm/scsi.h
+++ b/drivers/scsi/arm/scsi.h
@@ -10,6 +10,8 @@
* Commonly used scsi driver functions.
*/
+#include <linux/scatterlist.h>
+
#define BELT_AND_BRACES
/*
@@ -22,9 +24,7 @@ static inline int copy_SCp_to_sg(struct scatterlist *sg, Scsi_Pointer *SCp, int
BUG_ON(bufs + 1 > max);
- sg->page = virt_to_page(SCp->ptr);
- sg->offset = offset_in_page(SCp->ptr);
- sg->length = SCp->this_residual;
+ sg_set_buf(sg, SCp->ptr, SCp->this_residual);
if (bufs)
memcpy(sg + 1, SCp->buffer + 1,
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 3171e386f706..0d58f4d3e5ce 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -49,6 +49,7 @@
#include <linux/suspend.h>
#include <linux/workqueue.h>
#include <linux/jiffies.h>
+#include <linux/scatterlist.h>
#include <scsi/scsi.h>
#include "scsi.h"
#include "scsi_priv.h"
@@ -371,7 +372,7 @@ static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf)
struct ata_ioports *ioaddr = &ap->ioaddr;
tf->command = ata_check_status(ap);
- tf->feature = ata_chk_err(ap);
+ tf->feature = inb(ioaddr->error_addr);
tf->nsect = inb(ioaddr->nsect_addr);
tf->lbal = inb(ioaddr->lbal_addr);
tf->lbam = inb(ioaddr->lbam_addr);
@@ -405,7 +406,7 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
struct ata_ioports *ioaddr = &ap->ioaddr;
tf->command = ata_check_status(ap);
- tf->feature = ata_chk_err(ap);
+ tf->feature = readb((void __iomem *)ioaddr->error_addr);
tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
@@ -526,30 +527,6 @@ u8 ata_altstatus(struct ata_port *ap)
/**
- * ata_chk_err - Read device error reg
- * @ap: port where the device is
- *
- * Reads ATA taskfile error register for
- * currently-selected device and return its value.
- *
- * Note: may NOT be used as the check_err() entry in
- * ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-u8 ata_chk_err(struct ata_port *ap)
-{
- if (ap->ops->check_err)
- return ap->ops->check_err(ap);
-
- if (ap->flags & ATA_FLAG_MMIO) {
- return readb((void __iomem *) ap->ioaddr.error_addr);
- }
- return inb(ap->ioaddr.error_addr);
-}
-
-/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
* @fis: Buffer into which data will output
@@ -901,8 +878,8 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device)
memset(&tf, 0, sizeof(tf));
- err = ata_chk_err(ap);
ap->ops->tf_read(ap, &tf);
+ err = tf.feature;
dev->class = ATA_DEV_NONE;
@@ -1139,7 +1116,6 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device)
unsigned int major_version;
u16 tmp;
unsigned long xfer_modes;
- u8 status;
unsigned int using_edd;
DECLARE_COMPLETION(wait);
struct ata_queued_cmd *qc;
@@ -1193,8 +1169,11 @@ retry:
else
wait_for_completion(&wait);
- status = ata_chk_status(ap);
- if (status & ATA_ERR) {
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->ops->tf_read(ap, &qc->tf);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (qc->tf.command & ATA_ERR) {
/*
* arg! EDD works for all test cases, but seems to return
* the ATA signature for some ATAPI devices. Until the
@@ -1207,7 +1186,7 @@ retry:
* to have this problem.
*/
if ((using_edd) && (qc->tf.command == ATA_CMD_ID_ATA)) {
- u8 err = ata_chk_err(ap);
+ u8 err = qc->tf.feature;
if (err & ATA_ABORTED) {
dev->class = ATA_DEV_ATAPI;
qc->cursg = 0;
@@ -2609,9 +2588,7 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
qc->buf_virt = buf;
sg = qc->__sg;
- sg->page = virt_to_page(buf);
- sg->offset = (unsigned long) buf & ~PAGE_MASK;
- sg->length = buflen;
+ sg_init_one(sg, buf, buflen);
}
/**
@@ -4962,7 +4939,6 @@ EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
EXPORT_SYMBOL_GPL(ata_check_status);
EXPORT_SYMBOL_GPL(ata_altstatus);
-EXPORT_SYMBOL_GPL(ata_chk_err);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 1d6d0c9e76f6..ad4808ef71d4 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -258,7 +258,6 @@ struct mv_host_priv {
static void mv_irq_clear(struct ata_port *ap);
static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
-static u8 mv_check_err(struct ata_port *ap);
static void mv_phy_reset(struct ata_port *ap);
static void mv_host_stop(struct ata_host_set *host_set);
static int mv_port_start(struct ata_port *ap);
@@ -296,7 +295,6 @@ static const struct ata_port_operations mv_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
- .check_err = mv_check_err,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
@@ -1186,22 +1184,6 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
}
/**
- * mv_check_err - Return the error shadow register to caller.
- * @ap: ATA channel to manipulate
- *
- * Marvell requires DMA to be stopped before accessing shadow
- * registers. So we do that, then return the needed register.
- *
- * LOCKING:
- * Inherited from caller. FIXME: protect mv_stop_dma with lock?
- */
-static u8 mv_check_err(struct ata_port *ap)
-{
- mv_stop_dma(ap); /* can't read shadow regs if DMA on */
- return readb((void __iomem *) ap->ioaddr.error_addr);
-}
-
-/**
* mv_phy_reset - Perform eDMA reset followed by COMRESET
* @ap: ATA channel to manipulate
*
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 423096f7fe93..7e6e5c049b7d 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -225,7 +225,6 @@ struct sil24_host_priv {
};
static u8 sil24_check_status(struct ata_port *ap);
-static u8 sil24_check_err(struct ata_port *ap);
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
@@ -280,7 +279,6 @@ static const struct ata_port_operations sil24_ops = {
.check_status = sil24_check_status,
.check_altstatus = sil24_check_status,
- .check_err = sil24_check_err,
.dev_select = ata_noop_dev_select,
.tf_read = sil24_tf_read,
@@ -363,12 +361,6 @@ static u8 sil24_check_status(struct ata_port *ap)
return pp->tf.command;
}
-static u8 sil24_check_err(struct ata_port *ap)
-{
- struct sil24_port_priv *pp = ap->private_data;
- return pp->tf.feature;
-}
-
static int sil24_scr_map[] = {
[SCR_CONTROL] = 0,
[SCR_STATUS] = 1,
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 861e51375d70..d86d5c26061d 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -49,6 +49,7 @@ static int sg_version_num = 30533; /* 2 digits for each component */
#include <linux/seq_file.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/scatterlist.h>
#include "scsi.h"
#include <scsi/scsi_dbg.h>
@@ -1886,13 +1887,17 @@ st_unmap_user_pages(struct scatterlist *sgl, const unsigned int nr_pages,
int i;
for (i=0; i < nr_pages; i++) {
- if (dirtied && !PageReserved(sgl[i].page))
- SetPageDirty(sgl[i].page);
- /* unlock_page(sgl[i].page); */
+ struct page *page = sgl[i].page;
+
+ /* XXX: just for debug. Remove when PageReserved is removed */
+ BUG_ON(PageReserved(page));
+ if (dirtied)
+ SetPageDirty(page);
+ /* unlock_page(page); */
/* FIXME: cache flush missing for rw==READ
* FIXME: call the correct reference counting function
*/
- page_cache_release(sgl[i].page);
+ page_cache_release(page);
}
return 0;
@@ -1992,9 +1997,7 @@ sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size)
if (!p)
break;
}
- sclp->page = virt_to_page(p);
- sclp->offset = offset_in_page(p);
- sclp->length = ret_sz;
+ sg_set_buf(sclp, p, ret_sz);
SCSI_LOG_TIMEOUT(5, printk("sg_build_build: k=%d, a=0x%p, len=%d\n",
k, sg_scatg2virt(sclp), ret_sz));
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 5eb54d8019b4..da9766283bd7 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4526,12 +4526,16 @@ static int sgl_unmap_user_pages(struct scatterlist *sgl, const unsigned int nr_p
int i;
for (i=0; i < nr_pages; i++) {
- if (dirtied && !PageReserved(sgl[i].page))
- SetPageDirty(sgl[i].page);
+ struct page *page = sgl[i].page;
+
+ /* XXX: just for debug. Remove when PageReserved is removed */
+ BUG_ON(PageReserved(page));
+ if (dirtied)
+ SetPageDirty(page);
/* FIXME: cache flush missing for rw==READ
* FIXME: call the correct reference counting function
*/
- page_cache_release(sgl[i].page);
+ page_cache_release(page);
}
return 0;
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 90a96257d6ce..2997f558159b 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -9,7 +9,7 @@
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/usb.h>
@@ -381,7 +381,6 @@ alloc_sglist (int nents, int max, int vary)
sg = kmalloc (nents * sizeof *sg, SLAB_KERNEL);
if (!sg)
return NULL;
- memset (sg, 0, nents * sizeof *sg);
for (i = 0; i < nents; i++) {
char *buf;
@@ -394,9 +393,7 @@ alloc_sglist (int nents, int max, int vary)
memset (buf, 0, size);
/* kmalloc pages are always physically contiguous! */
- sg [i].page = virt_to_page (buf);
- sg [i].offset = offset_in_page (buf);
- sg [i].length = size;
+ sg_init_one(&sg[i], buf, size);
if (vary) {
size += vary;