diff options
author | Lukas Wunner <lukas@wunner.de> | 2018-11-29 16:45:24 +0100 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2018-12-04 16:51:12 +0000 |
commit | b31a9299bca66c42583ef2e2f685369780cdf350 (patch) | |
tree | cbf55606c5fd9e083df02bb205e87d0cc332e0e9 /drivers | |
parent | b12a084c8729ef423089bb9a5a143eed39cd94e7 (diff) |
spi: bcm2835: Polish transfer of DMA prologue
Commit 3bd7f6589f67 ("spi: bcm2835: Overcome sglist entry length
limitation") was unfortunately merged even though submission of a
refined version was imminent. Apply those refinements as an amendment:
* Drop no longer needed #include <asm/page.h>. The lines requiring
its inclusion were removed by the commit.
* Change type of tx_spillover flag from bool to unsigned int for
consistency with dma_pending flag and pursuant to Linus' dictum:
https://lkml.org/lkml/2017/11/21/384
* In bcm2835_rd_fifo_count() do not check for bs->rx_buf != NULL.
The function will never be called if that's the case.
* Amend kerneldoc of bcm2835_wait_tx_fifo_empty() to prevent its use in
situations where the function might spin forever. (In response to a
review comment by Stefan Wahren.)
* Sync only the cacheline containing the RX prologue back to memory,
not the full first sglist entry.
* Use sg_dma_address() and sg_dma_len() instead of referencing the
sglist entry members directly. Seems to be the more common syntax in
the tree, even for lvalues.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Martin Sperl <kernel@martin.sperl.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/spi/spi-bcm2835.c | 54 |
1 files changed, 29 insertions, 25 deletions
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 5cbdc94bb4cf..8c121b3374dd 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -20,7 +20,6 @@ * GNU General Public License for more details. */ -#include <asm/page.h> #include <linux/clk.h> #include <linux/completion.h> #include <linux/delay.h> @@ -108,7 +107,7 @@ struct bcm2835_spi { int rx_len; int tx_prologue; int rx_prologue; - bool tx_spillover; + unsigned int tx_spillover; unsigned int dma_pending; }; @@ -155,21 +154,20 @@ static inline void bcm2835_wr_fifo(struct bcm2835_spi *bs) * The caller must ensure that @bs->rx_len is greater than or equal to @count, * that the RX FIFO contains at least @count bytes and that the DMA Enable flag * in the CS register is set (such that a read from the FIFO register receives - * 32-bit instead of just 8-bit). + * 32-bit instead of just 8-bit). Moreover @bs->rx_buf must not be %NULL. */ static inline void bcm2835_rd_fifo_count(struct bcm2835_spi *bs, int count) { u32 val; + int len; bs->rx_len -= count; while (count > 0) { val = bcm2835_rd(bs, BCM2835_SPI_FIFO); - if (bs->rx_buf) { - int len = min(count, 4); - memcpy(bs->rx_buf, &val, len); - bs->rx_buf += len; - } + len = min(count, 4); + memcpy(bs->rx_buf, &val, len); + bs->rx_buf += len; count -= 4; } } @@ -187,12 +185,13 @@ static inline void bcm2835_rd_fifo_count(struct bcm2835_spi *bs, int count) static inline void bcm2835_wr_fifo_count(struct bcm2835_spi *bs, int count) { u32 val; + int len; bs->tx_len -= count; while (count > 0) { if (bs->tx_buf) { - int len = min(count, 4); + len = min(count, 4); memcpy(&val, bs->tx_buf, len); bs->tx_buf += len; } else { @@ -206,6 +205,10 @@ static inline void bcm2835_wr_fifo_count(struct bcm2835_spi *bs, int count) /** * bcm2835_wait_tx_fifo_empty() - busy-wait for TX FIFO to empty * @bs: BCM2835 SPI controller + * + * The caller must ensure that the RX FIFO can accommodate as many bytes + * as have been written to the TX FIFO: Transmission is halted once the + * RX FIFO is full, causing this function to spin forever. */ static inline void bcm2835_wait_tx_fifo_empty(struct bcm2835_spi *bs) { @@ -379,11 +382,12 @@ static void bcm2835_spi_transfer_prologue(struct spi_master *master, bcm2835_rd_fifo_count(bs, bs->rx_prologue); bcm2835_spi_reset_hw(master); - dma_sync_sg_for_device(master->dma_rx->device->dev, - tfr->rx_sg.sgl, 1, DMA_FROM_DEVICE); + dma_sync_single_for_device(master->dma_rx->device->dev, + sg_dma_address(&tfr->rx_sg.sgl[0]), + bs->rx_prologue, DMA_FROM_DEVICE); - tfr->rx_sg.sgl[0].dma_address += bs->rx_prologue; - tfr->rx_sg.sgl[0].length -= bs->rx_prologue; + sg_dma_address(&tfr->rx_sg.sgl[0]) += bs->rx_prologue; + sg_dma_len(&tfr->rx_sg.sgl[0]) -= bs->rx_prologue; } /* @@ -401,12 +405,12 @@ static void bcm2835_spi_transfer_prologue(struct spi_master *master, } if (likely(!bs->tx_spillover)) { - tfr->tx_sg.sgl[0].dma_address += bs->tx_prologue; - tfr->tx_sg.sgl[0].length -= bs->tx_prologue; + sg_dma_address(&tfr->tx_sg.sgl[0]) += bs->tx_prologue; + sg_dma_len(&tfr->tx_sg.sgl[0]) -= bs->tx_prologue; } else { - tfr->tx_sg.sgl[0].length = 0; - tfr->tx_sg.sgl[1].dma_address += 4; - tfr->tx_sg.sgl[1].length -= 4; + sg_dma_len(&tfr->tx_sg.sgl[0]) = 0; + sg_dma_address(&tfr->tx_sg.sgl[1]) += 4; + sg_dma_len(&tfr->tx_sg.sgl[1]) -= 4; } } @@ -426,17 +430,17 @@ static void bcm2835_spi_undo_prologue(struct bcm2835_spi *bs) return; if (bs->rx_prologue) { - tfr->rx_sg.sgl[0].dma_address -= bs->rx_prologue; - tfr->rx_sg.sgl[0].length += bs->rx_prologue; + sg_dma_address(&tfr->rx_sg.sgl[0]) -= bs->rx_prologue; + sg_dma_len(&tfr->rx_sg.sgl[0]) += bs->rx_prologue; } if (likely(!bs->tx_spillover)) { - tfr->tx_sg.sgl[0].dma_address -= bs->tx_prologue; - tfr->tx_sg.sgl[0].length += bs->tx_prologue; + sg_dma_address(&tfr->tx_sg.sgl[0]) -= bs->tx_prologue; + sg_dma_len(&tfr->tx_sg.sgl[0]) += bs->tx_prologue; } else { - tfr->tx_sg.sgl[0].length = bs->tx_prologue - 4; - tfr->tx_sg.sgl[1].dma_address -= 4; - tfr->tx_sg.sgl[1].length += 4; + sg_dma_len(&tfr->tx_sg.sgl[0]) = bs->tx_prologue - 4; + sg_dma_address(&tfr->tx_sg.sgl[1]) -= 4; + sg_dma_len(&tfr->tx_sg.sgl[1]) += 4; } } |