[media] se401: remove last V4L1 driver

This driver is for obsolete hardware that the old maintainer
didn't care (or not have the hardware anymore), and that no other developer
could find any hardware to buy.

The V4L1 API is no longer supported, and since nobody stepped in to convert
them to V4L2 the decision was made to remove them.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

8 files changed, 0 insertions, 2068 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index a3f340bb6b59..fa5c007e74c8 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -55,8 +55,6 @@ source "drivers/staging/cxd2099/Kconfig"
 
 source "drivers/staging/dabusb/Kconfig"
 
-source "drivers/staging/se401/Kconfig"
-
 source "drivers/staging/usbip/Kconfig"
 
 source "drivers/staging/winbond/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 532331ceb12d..2bdd703ed208 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_VIDEO_CX25821)	+= cx25821/
 obj-$(CONFIG_VIDEO_TM6000)	+= tm6000/
 obj-$(CONFIG_DVB_CXD2099)	+= cxd2099/
 obj-$(CONFIG_USB_DABUSB)        += dabusb/
-obj-$(CONFIG_USB_SE401)         += se401/
 obj-$(CONFIG_LIRC_STAGING)	+= lirc/
 obj-$(CONFIG_USB_IP_COMMON)	+= usbip/
 obj-$(CONFIG_W35UND)		+= winbond/
diff --git a/drivers/staging/se401/Kconfig b/drivers/staging/se401/Kconfig
deleted file mode 100644
index b7f8222ad21b..000000000000
--- a/drivers/staging/se401/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-config USB_SE401
-	tristate "USB SE401 Camera support (DEPRECATED)"
-	depends on VIDEO_DEV && VIDEO_V4L2_COMMON && USB
-	---help---
-	  Say Y here if you want to connect this type of camera to your
-	  computer's USB port. See <file:Documentation/video4linux/se401.txt>
-	  for more information and for a list of supported cameras.
-
-	  This driver uses the deprecated V4L1 API and will be removed in
-	  2.6.39, unless someone converts it to the V4L2 API.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called se401.
diff --git a/drivers/staging/se401/Makefile b/drivers/staging/se401/Makefile
deleted file mode 100644
index b465d49783af..000000000000
--- a/drivers/staging/se401/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_USB_SE401)         += se401.o
diff --git a/drivers/staging/se401/TODO b/drivers/staging/se401/TODO
deleted file mode 100644
index 3b2c03836286..000000000000
--- a/drivers/staging/se401/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-This is an obsolete driver for some old webcams that still use V4L1 API. 
-As V4L1 support is being removed from kernel, if nobody take care on it, 
-the driver will be removed for 2.6.39.
-
-Please send patches to linux-media@vger.kernel.org
diff --git a/drivers/staging/se401/se401.c b/drivers/staging/se401/se401.c
deleted file mode 100644
index 41360d7c3e96..000000000000
--- a/drivers/staging/se401/se401.c
+++ /dev/null
@@ -1,1492 +0,0 @@
-/*
- * Endpoints (formerly known as AOX) se401 USB Camera Driver
- *
- * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
- *
- * Still somewhat based on the Linux ov511 driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Thanks to Endpoints Inc. (www.endpoints.com) for making documentation on
- * their chipset available and supporting me while writing this driver.
- * 	- Jeroen Vreeken
- */
-
-static const char version[] = "0.24";
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/pagemap.h>
-#include <linux/usb.h>
-#include "se401.h"
-
-static int flickerless;
-static int video_nr = -1;
-
-static struct usb_device_id device_table[] = {
-	{ USB_DEVICE(0x03e8, 0x0004) },/* Endpoints/Aox SE401 */
-	{ USB_DEVICE(0x0471, 0x030b) },/* Philips PCVC665K */
-	{ USB_DEVICE(0x047d, 0x5001) },/* Kensington 67014 */
-	{ USB_DEVICE(0x047d, 0x5002) },/* Kensington 6701(5/7) */
-	{ USB_DEVICE(0x047d, 0x5003) },/* Kensington 67016 */
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, device_table);
-
-MODULE_AUTHOR("Jeroen Vreeken <pe1rxq@amsat.org>");
-MODULE_DESCRIPTION("SE401 USB Camera Driver");
-MODULE_LICENSE("GPL");
-module_param(flickerless, int, 0);
-MODULE_PARM_DESC(flickerless,
-		"Net frequency to adjust exposure time to (0/50/60)");
-module_param(video_nr, int, 0);
-
-static struct usb_driver se401_driver;
-
-
-/**********************************************************************
- *
- * Memory management
- *
- **********************************************************************/
-static void *rvmalloc(unsigned long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr +=  PAGE_SIZE;
-		size -=  PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-static void rvfree(void *mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr +=  PAGE_SIZE;
-		size -=  PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
-
-
-/****************************************************************************
- *
- * se401 register read/write functions
- *
- ***************************************************************************/
-
-static int se401_sndctrl(int set, struct usb_se401 *se401, unsigned short req,
-			 unsigned short value, unsigned char *cp, int size)
-{
-	return usb_control_msg(
-		se401->dev,
-		set ? usb_sndctrlpipe(se401->dev, 0) : usb_rcvctrlpipe(se401->dev, 0),
-		req,
-		(set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		value,
-		0,
-		cp,
-		size,
-		1000
-	);
-}
-
-static int se401_set_feature(struct usb_se401 *se401, unsigned short selector,
-			     unsigned short param)
-{
-	/* specs say that the selector (address) should go in the value field
-	   and the param in index, but in the logs of the windows driver they do
-	   this the other way around...
-	 */
-	return usb_control_msg(
-		se401->dev,
-		usb_sndctrlpipe(se401->dev, 0),
-		SE401_REQ_SET_EXT_FEATURE,
-		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		param,
-		selector,
-		NULL,
-		0,
-		1000
-	);
-}
-
-static unsigned short se401_get_feature(struct usb_se401 *se401,
-					unsigned short selector)
-{
-	/* For 'set' the selecetor should be in index, not sure if the spec is
-	   wrong here to....
-	 */
-	unsigned char cp[2];
-	usb_control_msg(
-		se401->dev,
-		usb_rcvctrlpipe(se401->dev, 0),
-		SE401_REQ_GET_EXT_FEATURE,
-		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		0,
-		selector,
-		cp,
-		2,
-		1000
-	);
-	return cp[0]+cp[1]*256;
-}
-
-/****************************************************************************
- *
- * Camera control
- *
- ***************************************************************************/
-
-
-static int se401_send_pict(struct usb_se401 *se401)
-{
-	/* integration time low */
-	se401_set_feature(se401, HV7131_REG_TITL, se401->expose_l);
-	/* integration time mid */
-	se401_set_feature(se401, HV7131_REG_TITM, se401->expose_m);
-	/* integration time mid */
-	se401_set_feature(se401, HV7131_REG_TITU, se401->expose_h);
-	/* reset level value */
-	se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);
-	/* red color gain */
-	se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain);
-	/* green color gain */
-	se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain);
-	/* blue color gain */
-	se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain);
-
-	return 0;
-}
-
-static void se401_set_exposure(struct usb_se401 *se401, int brightness)
-{
-	int integration = brightness << 5;
-
-	if (flickerless == 50)
-		integration = integration-integration % 106667;
-	if (flickerless == 60)
-		integration = integration-integration % 88889;
-	se401->brightness = integration >> 5;
-	se401->expose_h = (integration >> 16) & 0xff;
-	se401->expose_m = (integration >> 8) & 0xff;
-	se401->expose_l = integration & 0xff;
-}
-
-static int se401_get_pict(struct usb_se401 *se401, struct video_picture *p)
-{
-	p->brightness = se401->brightness;
-	if (se401->enhance)
-		p->whiteness = 32768;
-	else
-		p->whiteness = 0;
-
-	p->colour = 65535;
-	p->contrast = 65535;
-	p->hue = se401->rgain << 10;
-	p->palette = se401->palette;
-	p->depth = 3; /* rgb24 */
-	return 0;
-}
-
-
-static int se401_set_pict(struct usb_se401 *se401, struct video_picture *p)
-{
-	if (p->palette != VIDEO_PALETTE_RGB24)
-		return 1;
-	se401->palette = p->palette;
-	if (p->hue != se401->hue) {
-		se401->rgain =  p->hue >> 10;
-		se401->bgain =  0x40-(p->hue >> 10);
-		se401->hue = p->hue;
-	}
-	if (p->brightness != se401->brightness)
-		se401_set_exposure(se401, p->brightness);
-
-	if (p->whiteness >= 32768)
-		se401->enhance = 1;
-	else
-		se401->enhance = 0;
-	se401_send_pict(se401);
-	se401_send_pict(se401);
-	return 0;
-}
-
-/*
-	Hyundai have some really nice docs about this and other sensor related
-	stuff on their homepage: www.hei.co.kr
-*/
-static void se401_auto_resetlevel(struct usb_se401 *se401)
-{
-	unsigned int ahrc, alrc;
-	int oldreset = se401->resetlevel;
-
-	/* For some reason this normally read-only register doesn't get reset
-	   to zero after reading them just once...
-	 */
-	se401_get_feature(se401, HV7131_REG_HIREFNOH);
-	se401_get_feature(se401, HV7131_REG_HIREFNOL);
-	se401_get_feature(se401, HV7131_REG_LOREFNOH);
-	se401_get_feature(se401, HV7131_REG_LOREFNOL);
-	ahrc = 256*se401_get_feature(se401, HV7131_REG_HIREFNOH) +
-	    se401_get_feature(se401, HV7131_REG_HIREFNOL);
-	alrc = 256*se401_get_feature(se401, HV7131_REG_LOREFNOH) +
-	    se401_get_feature(se401, HV7131_REG_LOREFNOL);
-
-	/* Not an exact science, but it seems to work pretty well... */
-	if (alrc > 10) {
-		while (alrc >= 10 && se401->resetlevel < 63) {
-			se401->resetlevel++;
-			alrc /= 2;
-		}
-	} else if (ahrc > 20) {
-		while (ahrc >= 20 && se401->resetlevel > 0) {
-			se401->resetlevel--;
-			ahrc /= 2;
-		}
-	}
-	if (se401->resetlevel != oldreset)
-		se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);
-
-	return;
-}
-
-/* irq handler for snapshot button */
-static void se401_button_irq(struct urb *urb)
-{
-	struct usb_se401 *se401 = urb->context;
-	int status;
-
-	if (!se401->dev) {
-		dev_info(&urb->dev->dev, "device vapourished\n");
-		return;
-	}
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-							__func__, urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d",
-							__func__, urb->status);
-		goto exit;
-	}
-
-	if (urb->actual_length  >= 2)
-		if (se401->button)
-			se401->buttonpressed = 1;
-exit:
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status)
-		err("%s - usb_submit_urb failed with result %d",
-		     __func__, status);
-}
-
-static void se401_video_irq(struct urb *urb)
-{
-	struct usb_se401 *se401 = urb->context;
-	int length = urb->actual_length;
-
-	/* ohoh... */
-	if (!se401->streaming)
-		return;
-
-	if (!se401->dev) {
-		dev_info(&urb->dev->dev, "device vapourished\n");
-		return;
-	}
-
-	/* 0 sized packets happen if we are to fast, but sometimes the camera
-	   keeps sending them forever...
-	 */
-	if (length && !urb->status) {
-		se401->nullpackets = 0;
-		switch (se401->scratch[se401->scratch_next].state) {
-		case BUFFER_READY:
-		case BUFFER_BUSY:
-			se401->dropped++;
-			break;
-		case BUFFER_UNUSED:
-			memcpy(se401->scratch[se401->scratch_next].data,
-				(unsigned char *)urb->transfer_buffer, length);
-			se401->scratch[se401->scratch_next].state
-							= BUFFER_READY;
-			se401->scratch[se401->scratch_next].offset
-							= se401->bayeroffset;
-			se401->scratch[se401->scratch_next].length = length;
-			if (waitqueue_active(&se401->wq))
-				wake_up_interruptible(&se401->wq);
-			se401->scratch_overflow = 0;
-			se401->scratch_next++;
-			if (se401->scratch_next >= SE401_NUMSCRATCH)
-				se401->scratch_next = 0;
-			break;
-		}
-		se401->bayeroffset += length;
-		if (se401->bayeroffset >= se401->cheight * se401->cwidth)
-			se401->bayeroffset = 0;
-	} else {
-		se401->nullpackets++;
-		if (se401->nullpackets > SE401_MAX_NULLPACKETS)
-			if (waitqueue_active(&se401->wq))
-				wake_up_interruptible(&se401->wq);
-	}
-
-	/* Resubmit urb for new data */
-	urb->status = 0;
-	urb->dev = se401->dev;
-	if (usb_submit_urb(urb, GFP_KERNEL))
-		dev_info(&urb->dev->dev, "urb burned down\n");
-	return;
-}
-
-static void se401_send_size(struct usb_se401 *se401, int width, int height)
-{
-	int i = 0;
-	int mode = 0x03; /* No compression */
-	int sendheight = height;
-	int sendwidth = width;
-
-	/* JangGu compression can only be used with the camera supported sizes,
-	   but bayer seems to work with any size that fits on the sensor.
-	   We check if we can use compression with the current size with either
-	   4 or 16 times subcapturing, if not we use uncompressed bayer data
-	   but this will result in cutouts of the maximum size....
-	 */
-	while (i < se401->sizes && !(se401->width[i] == width &&
-						se401->height[i] == height))
-		i++;
-	while (i < se401->sizes) {
-		if (se401->width[i] == width * 2 &&
-				se401->height[i] == height * 2) {
-			sendheight = se401->height[i];
-			sendwidth = se401->width[i];
-			mode = 0x40;
-		}
-		if (se401->width[i] == width * 4 &&
-				se401->height[i] == height * 4) {
-			sendheight = se401->height[i];
-			sendwidth = se401->width[i];
-			mode = 0x42;
-		}
-		i++;
-	}
-
-	se401_sndctrl(1, se401, SE401_REQ_SET_WIDTH, sendwidth, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_SET_HEIGHT, sendheight, NULL, 0);
-	se401_set_feature(se401, SE401_OPERATINGMODE, mode);
-
-	if (mode == 0x03)
-		se401->format = FMT_BAYER;
-	else
-		se401->format = FMT_JANGGU;
-}
-
-/*
-	In this function se401_send_pict is called several times,
-	for some reason (depending on the state of the sensor and the phase of
-	the moon :) doing this only in either place doesn't always work...
-*/
-static int se401_start_stream(struct usb_se401 *se401)
-{
-	struct urb *urb;
-	int err = 0, i;
-	se401->streaming = 1;
-
-	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
-
-	/* Set picture settings */
-	/* windowed + pix intg */
-	se401_set_feature(se401, HV7131_REG_MODE_B, 0x05);
-	se401_send_pict(se401);
-
-	se401_send_size(se401, se401->cwidth, se401->cheight);
-
-	se401_sndctrl(1, se401, SE401_REQ_START_CONTINUOUS_CAPTURE,
-								0, NULL, 0);
-
-	/* Do some memory allocation */
-	for (i = 0; i < SE401_NUMFRAMES; i++) {
-		se401->frame[i].data = se401->fbuf + i * se401->maxframesize;
-		se401->frame[i].curpix = 0;
-	}
-	for (i = 0; i < SE401_NUMSBUF; i++) {
-		se401->sbuf[i].data = kmalloc(SE401_PACKETSIZE, GFP_KERNEL);
-		if (!se401->sbuf[i].data) {
-			for (i = i - 1; i >= 0; i--) {
-				kfree(se401->sbuf[i].data);
-				se401->sbuf[i].data = NULL;
-			}
-			return -ENOMEM;
-		}
-	}
-
-	se401->bayeroffset = 0;
-	se401->scratch_next = 0;
-	se401->scratch_use = 0;
-	se401->scratch_overflow = 0;
-	for (i = 0; i < SE401_NUMSCRATCH; i++) {
-		se401->scratch[i].data = kmalloc(SE401_PACKETSIZE, GFP_KERNEL);
-		if (!se401->scratch[i].data) {
-			for (i = i - 1; i >= 0; i--) {
-				kfree(se401->scratch[i].data);
-				se401->scratch[i].data = NULL;
-			}
-			goto nomem_sbuf;
-		}
-		se401->scratch[i].state = BUFFER_UNUSED;
-	}
-
-	for (i = 0; i < SE401_NUMSBUF; i++) {
-		urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!urb) {
-			for (i = i - 1; i >= 0; i--) {
-				usb_kill_urb(se401->urb[i]);
-				usb_free_urb(se401->urb[i]);
-				se401->urb[i] = NULL;
-			}
-			goto nomem_scratch;
-		}
-
-		usb_fill_bulk_urb(urb, se401->dev,
-			usb_rcvbulkpipe(se401->dev, SE401_VIDEO_ENDPOINT),
-			se401->sbuf[i].data, SE401_PACKETSIZE,
-			se401_video_irq,
-			se401);
-
-		se401->urb[i] = urb;
-
-		err = usb_submit_urb(se401->urb[i], GFP_KERNEL);
-		if (err)
-			err("urb burned down");
-	}
-
-	se401->framecount = 0;
-
-	return 0;
-
- nomem_scratch:
-	for (i = 0; i < SE401_NUMSCRATCH; i++) {
-		kfree(se401->scratch[i].data);
-		se401->scratch[i].data = NULL;
-	}
- nomem_sbuf:
-	for (i = 0; i < SE401_NUMSBUF; i++) {
-		kfree(se401->sbuf[i].data);
-		se401->sbuf[i].data = NULL;
-	}
-	return -ENOMEM;
-}
-
-static int se401_stop_stream(struct usb_se401 *se401)
-{
-	int i;
-
-	if (!se401->streaming || !se401->dev)
-		return 1;
-
-	se401->streaming = 0;
-
-	se401_sndctrl(1, se401, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, NULL, 0);
-
-	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0);
-
-	for (i = 0; i < SE401_NUMSBUF; i++)
-		if (se401->urb[i]) {
-			usb_kill_urb(se401->urb[i]);
-			usb_free_urb(se401->urb[i]);
-			se401->urb[i] = NULL;
-			kfree(se401->sbuf[i].data);
-		}
-	for (i = 0; i < SE401_NUMSCRATCH; i++) {
-		kfree(se401->scratch[i].data);
-		se401->scratch[i].data = NULL;
-	}
-
-	return 0;
-}
-
-static int se401_set_size(struct usb_se401 *se401, int width, int height)
-{
-	int wasstreaming = se401->streaming;
-	/* Check to see if we need to change */
-	if (se401->cwidth == width && se401->cheight == height)
-		return 0;
-
-	/* Check for a valid mode */
-	if (!width || !height)
-		return 1;
-	if ((width & 1) || (height & 1))
-		return 1;
-	if (width > se401->width[se401->sizes-1])
-		return 1;
-	if (height > se401->height[se401->sizes-1])
-		return 1;
-
-	/* Stop a current stream and start it again at the new size */
-	if (wasstreaming)
-		se401_stop_stream(se401);
-	se401->cwidth = width;
-	se401->cheight = height;
-	if (wasstreaming)
-		se401_start_stream(se401);
-	return 0;
-}
-
-
-/****************************************************************************
- *
- * Video Decoding
- *
- ***************************************************************************/
-
-/*
-	This shouldn't really be done in a v4l driver....
-	But it does make the image look a lot more usable.
-	Basically it lifts the dark pixels more than the light pixels.
-*/
-static inline void enhance_picture(unsigned char *frame, int len)
-{
-	while (len--) {
-		*frame = (((*frame^255)*(*frame^255))/255)^255;
-		frame++;
-	}
-}
-
-static inline void decode_JangGu_integrate(struct usb_se401 *se401, int data)
-{
-	struct se401_frame *frame = &se401->frame[se401->curframe];
-	int linelength = se401->cwidth * 3;
-
-	if (frame->curlinepix >= linelength) {
-		frame->curlinepix = 0;
-		frame->curline += linelength;
-	}
-
-	/* First three are absolute, all others relative.
-	 * Format is rgb from right to left (mirrorred image),
-	 * we flip it to get bgr from left to right. */
-	if (frame->curlinepix < 3)
-		*(frame->curline-frame->curlinepix) = 1 + data * 4;
-	else
-		*(frame->curline-frame->curlinepix) =
-		    *(frame->curline-frame->curlinepix + 3) + data * 4;
-	frame->curlinepix++;
-}
-
-static inline void decode_JangGu_vlc(struct usb_se401 *se401,
-			unsigned char *data, int bit_exp, int packetlength)
-{
-	int pos = 0;
-	int vlc_cod = 0;
-	int vlc_size = 0;
-	int vlc_data = 0;
-	int bit_cur;
-	int bit;
-	data += 4;
-	while (pos < packetlength) {
-		bit_cur = 8;
-		while (bit_cur && bit_exp) {
-			bit = ((*data) >> (bit_cur-1))&1;
-			if (!vlc_cod) {
-				if (bit) {
-					vlc_size++;
-				} else {
-					if (!vlc_size)
-						decode_JangGu_integrate(se401, 0);
-					else {
-						vlc_cod = 2;
-						vlc_data = 0;
-					}
-				}
-			} else {
-				if (vlc_cod == 2) {
-					if (!bit)
-						vlc_data =  -(1 << vlc_size) + 1;
-					vlc_cod--;
-				}
-				vlc_size--;
-				vlc_data += bit << vlc_size;
-				if (!vlc_size) {
-					decode_JangGu_integrate(se401, vlc_data);
-					vlc_cod = 0;
-				}
-			}
-			bit_cur--;
-			bit_exp--;
-		}
-		pos++;
-		data++;
-	}
-}
-
-static inline void decode_JangGu(struct usb_se401 *se401,
-						struct se401_scratch *buffer)
-{
-	unsigned char *data = buffer->data;
-	int len = buffer->length;
-	int bit_exp = 0, pix_exp = 0, frameinfo = 0, packetlength = 0, size;
-	int datapos = 0;
-
-	/* New image? */
-	if (!se401->frame[se401->curframe].curpix) {
-		se401->frame[se401->curframe].curlinepix = 0;
-		se401->frame[se401->curframe].curline =
-		    se401->frame[se401->curframe].data+
-		    se401->cwidth * 3 - 1;
-		if (se401->frame[se401->curframe].grabstate == FRAME_READY)
-			se401->frame[se401->curframe].grabstate = FRAME_GRABBING;
-		se401->vlcdatapos = 0;
-	}
-	while (datapos < len) {
-		size = 1024 - se401->vlcdatapos;
-		if (size+datapos > len)
-			size = len-datapos;
-		memcpy(se401->vlcdata+se401->vlcdatapos, data+datapos, size);
-		se401->vlcdatapos += size;
-		packetlength = 0;
-		if (se401->vlcdatapos >= 4) {
-			bit_exp = se401->vlcdata[3] + (se401->vlcdata[2] << 8);
-			pix_exp = se401->vlcdata[1] +
-					((se401->vlcdata[0] & 0x3f) << 8);
-			frameinfo = se401->vlcdata[0] & 0xc0;
-			packetlength = ((bit_exp + 47) >> 4) << 1;
-			if (packetlength > 1024) {
-				se401->vlcdatapos = 0;
-				datapos = len;
-				packetlength = 0;
-				se401->error++;
-				se401->frame[se401->curframe].curpix = 0;
-			}
-		}
-		if (packetlength && se401->vlcdatapos >= packetlength) {
-			decode_JangGu_vlc(se401, se401->vlcdata, bit_exp,
-								packetlength);
-			se401->frame[se401->curframe].curpix += pix_exp * 3;
-			datapos += size-(se401->vlcdatapos-packetlength);
-			se401->vlcdatapos = 0;
-			if (se401->frame[se401->curframe].curpix >= se401->cwidth * se401->cheight * 3) {
-				if (se401->frame[se401->curframe].curpix == se401->cwidth * se401->cheight * 3) {
-					if (se401->frame[se401->curframe].grabstate == FRAME_GRABBING) {
-						se401->frame[se401->curframe].grabstate = FRAME_DONE;
-						se401->framecount++;
-						se401->readcount++;
-					}
-					if (se401->frame[(se401->curframe + 1) & (SE401_NUMFRAMES - 1)].grabstate == FRAME_READY)
-						se401->curframe = (se401->curframe + 1) & (SE401_NUMFRAMES - 1);
-				} else
-					se401->error++;
-				se401->frame[se401->curframe].curpix = 0;
-				datapos = len;
-			}
-		} else
-			datapos += size;
-	}
-}
-
-static inline void decode_bayer(struct usb_se401 *se401,
-						struct se401_scratch *buffer)
-{
-	unsigned char *data = buffer->data;
-	int len = buffer->length;
-	int offset = buffer->offset;
-	int datasize = se401->cwidth * se401->cheight;
-	struct se401_frame *frame = &se401->frame[se401->curframe];
-	unsigned char *framedata = frame->data, *curline, *nextline;
-	int width = se401->cwidth;
-	int blineoffset = 0, bline;
-	int linelength = width * 3, i;
-
-
-	if (frame->curpix == 0) {
-		if (frame->grabstate == FRAME_READY)
-			frame->grabstate = FRAME_GRABBING;
-
-		frame->curline = framedata + linelength;
-		frame->curlinepix = 0;
-	}
-
-	if (offset != frame->curpix) {
-		/* Regard frame as lost :( */
-		frame->curpix = 0;
-		se401->error++;
-		return;
-	}
-
-	/* Check if we have to much data */
-	if (frame->curpix + len > datasize)
-		len = datasize-frame->curpix;
-
-	if (se401->cheight % 4)
-		blineoffset = 1;
-	bline = frame->curpix / se401->cwidth+blineoffset;
-
-	curline = frame->curline;
-	nextline = curline + linelength;
-	if (nextline >= framedata+datasize * 3)
-		nextline = curline;
-	while (len) {
-		if (frame->curlinepix >= width) {
-			frame->curlinepix -= width;
-			bline = frame->curpix / width + blineoffset;
-			curline += linelength*2;
-			nextline += linelength*2;
-			if (curline >= framedata+datasize * 3) {
-				frame->curlinepix++;
-				curline -= 3;
-				nextline -= 3;
-				len--;
-				data++;
-				frame->curpix++;
-			}
-			if (nextline >= framedata+datasize*3)
-				nextline = curline;
-		}
-		if (bline & 1) {
-			if (frame->curlinepix & 1) {
-				*(curline + 2) = *data;
-				*(curline - 1) = *data;
-				*(nextline + 2) = *data;
-				*(nextline - 1) = *data;
-			} else {
-				*(curline + 1) =
-					(*(curline + 1) + *data) / 2;
-				*(curline-2) =
-					(*(curline - 2) + *data) / 2;
-				*(nextline + 1) = *data;
-				*(nextline - 2) = *data;
-			}
-		} else {
-			if (frame->curlinepix & 1) {
-				*(curline + 1) =
-					(*(curline + 1) + *data) / 2;
-				*(curline - 2) =
-					(*(curline - 2) + *data) / 2;
-				*(nextline + 1) = *data;
-				*(nextline - 2) = *data;
-			} else {
-				*curline = *data;
-				*(curline - 3) = *data;
-				*nextline = *data;
-				*(nextline - 3) = *data;
-			}
-		}
-		frame->curlinepix++;
-		curline -= 3;
-		nextline -= 3;
-		len--;
-		data++;
-		frame->curpix++;
-	}
-	frame->curline = curline;
-
-	if (frame->curpix >= datasize) {
-		/* Fix the top line */
-		framedata += linelength;
-		for (i = 0; i < linelength; i++) {
-			framedata--;
-			*framedata = *(framedata + linelength);
-		}
-		/* Fix the left side (green is already present) */
-		for (i = 0; i < se401->cheight; i++) {
-			*framedata = *(framedata + 3);
-			*(framedata + 1) = *(framedata + 4);
-			*(framedata + 2) = *(framedata + 5);
-			framedata += linelength;
-		}
-		frame->curpix = 0;
-		frame->grabstate = FRAME_DONE;
-		se401->framecount++;
-		se401->readcount++;
-		if (se401->frame[(se401->curframe + 1) &
-		    (SE401_NUMFRAMES - 1)].grabstate == FRAME_READY) {
-			se401->curframe = (se401->curframe+1) &
-							(SE401_NUMFRAMES-1);
-		}
-	}
-}
-
-static int se401_newframe(struct usb_se401 *se401, int framenr)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int errors = 0;
-
-	while (se401->streaming &&
-	    (se401->frame[framenr].grabstate == FRAME_READY ||
-	     se401->frame[framenr].grabstate == FRAME_GRABBING)) {
-		if (!se401->frame[framenr].curpix)
-			errors++;
-
-		wait_interruptible(
-		    se401->scratch[se401->scratch_use].state != BUFFER_READY,
-						    &se401->wq, &wait);
-		if (se401->nullpackets > SE401_MAX_NULLPACKETS) {
-			se401->nullpackets = 0;
-			dev_info(&se401->dev->dev,
-			 "too many null length packets, restarting capture\n");
-			se401_stop_stream(se401);
-			se401_start_stream(se401);
-		} else {
-			if (se401->scratch[se401->scratch_use].state !=
-								BUFFER_READY) {
-				se401->frame[framenr].grabstate = FRAME_ERROR;
-				return -EIO;
-			}
-			se401->scratch[se401->scratch_use].state = BUFFER_BUSY;
-			if (se401->format == FMT_JANGGU)
-				decode_JangGu(se401,
-					&se401->scratch[se401->scratch_use]);
-			else
-				decode_bayer(se401,
-					&se401->scratch[se401->scratch_use]);
-
-			se401->scratch[se401->scratch_use].state =
-							BUFFER_UNUSED;
-			se401->scratch_use++;
-			if (se401->scratch_use >= SE401_NUMSCRATCH)
-				se401->scratch_use = 0;
-			if (errors > SE401_MAX_ERRORS) {
-				errors = 0;
-				dev_info(&se401->dev->dev,
-				      "too many errors, restarting capture\n");
-				se401_stop_stream(se401);
-				se401_start_stream(se401);
-			}
-		}
-	}
-
-	if (se401->frame[framenr].grabstate == FRAME_DONE)
-		if (se401->enhance)
-			enhance_picture(se401->frame[framenr].data,
-					se401->cheight * se401->cwidth * 3);
-	return 0;
-}
-
-static void usb_se401_remove_disconnected(struct usb_se401 *se401)
-{
-	int i;
-
-	se401->dev = NULL;
-
-	for (i = 0; i < SE401_NUMSBUF; i++)
-		if (se401->urb[i]) {
-			usb_kill_urb(se401->urb[i]);
-			usb_free_urb(se401->urb[i]);
-			se401->urb[i] = NULL;
-			kfree(se401->sbuf[i].data);
-		}
-
-	for (i = 0; i < SE401_NUMSCRATCH; i++)
-		kfree(se401->scratch[i].data);
-
-	if (se401->inturb) {
-		usb_kill_urb(se401->inturb);
-		usb_free_urb(se401->inturb);
-	}
-	dev_info(&se401->dev->dev, "%s disconnected", se401->camera_name);
-
-	/* Free the memory */
-	kfree(se401->width);
-	kfree(se401->height);
-	kfree(se401);
-}
-
-
-
-/****************************************************************************
- *
- * Video4Linux
- *
- ***************************************************************************/
-
-
-static int se401_open(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct usb_se401 *se401 = (struct usb_se401 *)dev;
-	int err = 0;
-
-	mutex_lock(&se401->lock);
-	if (se401->user) {
-		mutex_unlock(&se401->lock);
-		return -EBUSY;
-	}
-	se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES);
-	if (se401->fbuf)
-		file->private_data = dev;
-	else
-		err = -ENOMEM;
-	se401->user = !err;
-	mutex_unlock(&se401->lock);
-
-	return err;
-}
-
-static int se401_close(struct file *file)
-{
-	struct video_device *dev = file->private_data;
-	struct usb_se401 *se401 = (struct usb_se401 *)dev;
-	int i;
-
-	rvfree(se401->fbuf, se401->maxframesize * SE401_NUMFRAMES);
-	if (se401->removed) {
-		dev_info(&se401->dev->dev, "device unregistered\n");
-		usb_se401_remove_disconnected(se401);
-	} else {
-		for (i = 0; i < SE401_NUMFRAMES; i++)
-			se401->frame[i].grabstate = FRAME_UNUSED;
-		if (se401->streaming)
-			se401_stop_stream(se401);
-		se401->user = 0;
-	}
-	file->private_data = NULL;
-	return 0;
-}
-
-static long se401_do_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
-	struct video_device *vdev = file->private_data;
-	struct usb_se401 *se401 = (struct usb_se401 *)vdev;
-
-	if (!se401->dev)
-		return -EIO;
-
-	switch (cmd) {
-	case VIDIOCGCAP:
-	{
-		struct video_capability *b = arg;
-		strcpy(b->name, se401->camera_name);
-		b->type = VID_TYPE_CAPTURE;
-		b->channels = 1;
-		b->audios = 0;
-		b->maxwidth = se401->width[se401->sizes-1];
-		b->maxheight = se401->height[se401->sizes-1];
-		b->minwidth = se401->width[0];
-		b->minheight = se401->height[0];
-		return 0;
-	}
-	case VIDIOCGCHAN:
-	{
-		struct video_channel *v = arg;
-
-		if (v->channel != 0)
-			return -EINVAL;
-		v->flags = 0;
-		v->tuners = 0;
-		v->type = VIDEO_TYPE_CAMERA;
-		strcpy(v->name, "Camera");
-		return 0;
-	}
-	case VIDIOCSCHAN:
-	{
-		struct video_channel *v = arg;
-
-		if (v->channel != 0)
-			return -EINVAL;
-		return 0;
-	}
-	case VIDIOCGPICT:
-	{
-		struct video_picture *p = arg;
-
-		se401_get_pict(se401, p);
-		return 0;
-	}
-	case VIDIOCSPICT:
-	{
-		struct video_picture *p = arg;
-
-		if (se401_set_pict(se401, p))
-			return -EINVAL;
-		return 0;
-	}
-	case VIDIOCSWIN:
-	{
-		struct video_window *vw = arg;
-
-		if (vw->flags)
-			return -EINVAL;
-		if (vw->clipcount)
-			return -EINVAL;
-		if (se401_set_size(se401, vw->width, vw->height))
-			return -EINVAL;
-		return 0;
-	}
-	case VIDIOCGWIN:
-	{
-		struct video_window *vw = arg;
-
-		vw->x = 0;               /* FIXME */
-		vw->y = 0;
-		vw->chromakey = 0;
-		vw->flags = 0;
-		vw->clipcount = 0;
-		vw->width = se401->cwidth;
-		vw->height = se401->cheight;
-		return 0;
-	}
-	case VIDIOCGMBUF:
-	{
-		struct video_mbuf *vm = arg;
-		int i;
-
-		memset(vm, 0, sizeof(*vm));
-		vm->size = SE401_NUMFRAMES * se401->maxframesize;
-		vm->frames = SE401_NUMFRAMES;
-		for (i = 0; i < SE401_NUMFRAMES; i++)
-			vm->offsets[i] = se401->maxframesize * i;
-		return 0;
-	}
-	case VIDIOCMCAPTURE:
-	{
-		struct video_mmap *vm = arg;
-
-		if (vm->format != VIDEO_PALETTE_RGB24)
-			return -EINVAL;
-		if (vm->frame >= SE401_NUMFRAMES)
-			return -EINVAL;
-		if (se401->frame[vm->frame].grabstate != FRAME_UNUSED)
-			return -EBUSY;
-
-		/* Is this according to the v4l spec??? */
-		if (se401_set_size(se401, vm->width, vm->height))
-			return -EINVAL;
-		se401->frame[vm->frame].grabstate = FRAME_READY;
-
-		if (!se401->streaming)
-			se401_start_stream(se401);
-
-		/* Set the picture properties */
-		if (se401->framecount == 0)
-			se401_send_pict(se401);
-		/* Calibrate the reset level after a few frames. */
-		if (se401->framecount % 20 == 1)
-			se401_auto_resetlevel(se401);
-
-		return 0;
-	}
-	case VIDIOCSYNC:
-	{
-		int *frame = arg;
-		int ret = 0;
-
-		if (*frame < 0 || *frame >= SE401_NUMFRAMES)
-			return -EINVAL;
-
-		ret = se401_newframe(se401, *frame);
-		se401->frame[*frame].grabstate = FRAME_UNUSED;
-		return ret;
-	}
-	case VIDIOCGFBUF:
-	{
-		struct video_buffer *vb = arg;
-
-		memset(vb, 0, sizeof(*vb));
-		return 0;
-	}
-	case VIDIOCKEY:
-		return 0;
-	case VIDIOCCAPTURE:
-		return -EINVAL;
-	case VIDIOCSFBUF:
-		return -EINVAL;
-	case VIDIOCGTUNER:
-	case VIDIOCSTUNER:
-		return -EINVAL;
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-		return -EINVAL;
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-		return -EINVAL;
-	default:
-		return -ENOIOCTLCMD;
-	} /* end switch */
-
-	return 0;
-}
-
-static long se401_ioctl(struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	return video_usercopy(file, cmd, arg, se401_do_ioctl);
-}
-
-static ssize_t se401_read(struct file *file, char __user *buf,
-		     size_t count, loff_t *ppos)
-{
-	int realcount = count, ret = 0;
-	struct video_device *dev = file->private_data;
-	struct usb_se401 *se401 = (struct usb_se401 *)dev;
-
-
-	if (se401->dev ==  NULL)
-		return -EIO;
-	if (realcount > se401->cwidth*se401->cheight*3)
-		realcount = se401->cwidth*se401->cheight*3;
-
-	/* Shouldn't happen: */
-	if (se401->frame[0].grabstate == FRAME_GRABBING)
-		return -EBUSY;
-	se401->frame[0].grabstate = FRAME_READY;
-	se401->frame[1].grabstate = FRAME_UNUSED;
-	se401->curframe = 0;
-
-	if (!se401->streaming)
-		se401_start_stream(se401);
-
-	/* Set the picture properties */
-	if (se401->framecount == 0)
-		se401_send_pict(se401);
-	/* Calibrate the reset level after a few frames. */
-	if (se401->framecount%20 == 1)
-		se401_auto_resetlevel(se401);
-
-	ret = se401_newframe(se401, 0);
-
-	se401->frame[0].grabstate = FRAME_UNUSED;
-	if (ret)
-		return ret;
-	if (copy_to_user(buf, se401->frame[0].data, realcount))
-		return -EFAULT;
-
-	return realcount;
-}
-
-static int se401_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct video_device *dev = file->private_data;
-	struct usb_se401 *se401 = (struct usb_se401 *)dev;
-	unsigned long start = vma->vm_start;
-	unsigned long size  = vma->vm_end-vma->vm_start;
-	unsigned long page, pos;
-
-	mutex_lock(&se401->lock);
-
-	if (se401->dev ==  NULL) {
-		mutex_unlock(&se401->lock);
-		return -EIO;
-	}
-	if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1)
-							& ~(PAGE_SIZE - 1))) {
-		mutex_unlock(&se401->lock);
-		return -EINVAL;
-	}
-	pos = (unsigned long)se401->fbuf;
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
-			mutex_unlock(&se401->lock);
-			return -EAGAIN;
-		}
-		start +=  PAGE_SIZE;
-		pos +=  PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -=  PAGE_SIZE;
-		else
-			size = 0;
-	}
-	mutex_unlock(&se401->lock);
-
-	return 0;
-}
-
-static const struct v4l2_file_operations se401_fops = {
-	.owner  = 	THIS_MODULE,
-	.open =         se401_open,
-	.release =      se401_close,
-	.read =         se401_read,
-	.mmap =         se401_mmap,
-	.ioctl =        se401_ioctl,
-};
-static struct video_device se401_template = {
-	.name =         "se401 USB camera",
-	.fops =         &se401_fops,
-	.release = video_device_release_empty,
-};
-
-
-
-/***************************/
-static int se401_init(struct usb_se401 *se401, int button)
-{
-	int i = 0, rc;
-	unsigned char cp[0x40];
-	char temp[200];
-	int slen;
-
-	/* led on */
-	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
-
-	/* get camera descriptor */
-	rc = se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0,
-							cp, sizeof(cp));
-	if (cp[1] != 0x41) {
-		err("Wrong descriptor type");
-		return 1;
-	}
-	slen = snprintf(temp, 200, "ExtraFeatures: %d", cp[3]);
-
-	se401->sizes = cp[4] + cp[5] * 256;
-	se401->width = kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
-	if (!se401->width)
-		return 1;
-	se401->height = kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
-	if (!se401->height) {
-		kfree(se401->width);
-		return 1;
-	}
-	for (i = 0; i < se401->sizes; i++) {
-		se401->width[i] = cp[6 + i * 4 + 0] + cp[6 + i*4 + 1] * 256;
-		se401->height[i] = cp[6 + i * 4 + 2] + cp[6 + i * 4 + 3] * 256;
-	}
-	slen += snprintf(temp + slen, 200 - slen, " Sizes:");
-	for (i = 0; i < se401->sizes; i++) {
-		slen +=  snprintf(temp + slen, 200 - slen,
-			" %dx%d", se401->width[i], se401->height[i]);
-	}
-	dev_info(&se401->dev->dev, "%s\n", temp);
-	se401->maxframesize = se401->width[se401->sizes-1] *
-					se401->height[se401->sizes - 1] * 3;
-
-	rc = se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp));
-	se401->cwidth = cp[0]+cp[1]*256;
-	rc = se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp));
-	se401->cheight = cp[0]+cp[1]*256;
-
-	if (!(cp[2] & SE401_FORMAT_BAYER)) {
-		err("Bayer format not supported!");
-		return 1;
-	}
-	/* set output mode (BAYER) */
-	se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE,
-						SE401_FORMAT_BAYER, NULL, 0);
-
-	rc = se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp));
-	se401->brightness = cp[0]+cp[1]*256;
-	/* some default values */
-	se401->resetlevel = 0x2d;
-	se401->rgain = 0x20;
-	se401->ggain = 0x20;
-	se401->bgain = 0x20;
-	se401_set_exposure(se401, 20000);
-	se401->palette = VIDEO_PALETTE_RGB24;
-	se401->enhance = 1;
-	se401->dropped = 0;
-	se401->error = 0;
-	se401->framecount = 0;
-	se401->readcount = 0;
-
-	/* Start interrupt transfers for snapshot button */
-	if (button) {
-		se401->inturb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!se401->inturb) {
-			dev_info(&se401->dev->dev,
-				 "Allocation of inturb failed\n");
-			return 1;
-		}
-		usb_fill_int_urb(se401->inturb, se401->dev,
-		    usb_rcvintpipe(se401->dev, SE401_BUTTON_ENDPOINT),
-		    &se401->button, sizeof(se401->button),
-		    se401_button_irq,
-		    se401,
-		    8
-		);
-		if (usb_submit_urb(se401->inturb, GFP_KERNEL)) {
-			dev_info(&se401->dev->dev, "int urb burned down\n");
-			return 1;
-		}
-	} else
-		se401->inturb = NULL;
-
-	/* Flash the led */
-	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0);
-
-	return 0;
-}
-
-static int se401_probe(struct usb_interface *intf,
-	const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_interface_descriptor *interface;
-	struct usb_se401 *se401;
-	char *camera_name = NULL;
-	int button = 1;
-
-	/* We don't handle multi-config cameras */
-	if (dev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	interface = &intf->cur_altsetting->desc;
-
-	/* Is it an se401? */
-	if (le16_to_cpu(dev->descriptor.idVendor) ==  0x03e8 &&
-	    le16_to_cpu(dev->descriptor.idProduct) ==  0x0004) {
-		camera_name = "Endpoints/Aox SE401";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x0471 &&
-	    le16_to_cpu(dev->descriptor.idProduct) ==  0x030b) {
-		camera_name = "Philips PCVC665K";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x047d &&
-	    le16_to_cpu(dev->descriptor.idProduct) ==  0x5001) {
-		camera_name = "Kensington VideoCAM 67014";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x047d &&
-	    le16_to_cpu(dev->descriptor.idProduct) ==  0x5002) {
-		camera_name = "Kensington VideoCAM 6701(5/7)";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x047d &&
-	    le16_to_cpu(dev->descriptor.idProduct) ==  0x5003) {
-		camera_name = "Kensington VideoCAM 67016";
-		button = 0;
-	} else
-		return -ENODEV;
-
-	/* Checking vendor/product should be enough, but what the hell */
-	if (interface->bInterfaceClass != 0x00)
-		return -ENODEV;
-	if (interface->bInterfaceSubClass != 0x00)
-		return -ENODEV;
-
-	/* We found one */
-	dev_info(&intf->dev, "SE401 camera found: %s\n", camera_name);
-
-	se401 = kzalloc(sizeof(*se401), GFP_KERNEL);
-	if (se401 ==  NULL) {
-		err("couldn't kmalloc se401 struct");
-		return -ENOMEM;
-	}
-
-	se401->dev = dev;
-	se401->iface = interface->bInterfaceNumber;
-	se401->camera_name = camera_name;
-
-	dev_info(&intf->dev, "firmware version: %02x\n",
-		 le16_to_cpu(dev->descriptor.bcdDevice) & 255);
-
-	if (se401_init(se401, button)) {
-		kfree(se401);
-		return -EIO;
-	}
-
-	memcpy(&se401->vdev, &se401_template, sizeof(se401_template));
-	memcpy(se401->vdev.name, se401->camera_name,
-					strlen(se401->camera_name));
-	init_waitqueue_head(&se401->wq);
-	mutex_init(&se401->lock);
-	wmb();
-
-	if (video_register_device(&se401->vdev,
-					VFL_TYPE_GRABBER, video_nr) < 0) {
-		kfree(se401);
-		err("video_register_device failed");
-		return -EIO;
-	}
-	dev_info(&intf->dev, "registered new video device: %s\n",
-		 video_device_node_name(&se401->vdev));
-
-	usb_set_intfdata(intf, se401);
-	return 0;
-}
-
-static void se401_disconnect(struct usb_interface *intf)
-{
-	struct usb_se401 *se401 = usb_get_intfdata(intf);
-
-	usb_set_intfdata(intf, NULL);
-	if (se401) {
-		video_unregister_device(&se401->vdev);
-		if (!se401->user)
-			usb_se401_remove_disconnected(se401);
-		else {
-			se401->frame[0].grabstate = FRAME_ERROR;
-			se401->frame[0].grabstate = FRAME_ERROR;
-
-			se401->streaming = 0;
-
-			wake_up_interruptible(&se401->wq);
-			se401->removed = 1;
-		}
-	}
-}
-
-static struct usb_driver se401_driver = {
-	.name		 =  "se401",
-	.id_table	 =  device_table,
-	.probe		 =  se401_probe,
-	.disconnect	 =  se401_disconnect,
-};
-
-
-
-/****************************************************************************
- *
- *  Module routines
- *
- ***************************************************************************/
-
-static int __init usb_se401_init(void)
-{
-	printk(KERN_INFO "SE401 usb camera driver version %s registering\n",
-								version);
-	if (flickerless)
-		if (flickerless != 50 && flickerless != 60) {
-			printk(KERN_ERR "Invallid flickerless value, use 0, 50 or 60.\n");
-			return -1;
-	}
-	return usb_register(&se401_driver);
-}
-
-static void __exit usb_se401_exit(void)
-{
-	usb_deregister(&se401_driver);
-	printk(KERN_INFO "SE401 driver deregistered\frame");
-}
-
-module_init(usb_se401_init);
-module_exit(usb_se401_exit);
diff --git a/drivers/staging/se401/se401.h b/drivers/staging/se401/se401.h
deleted file mode 100644
index 2758f4716c3d..000000000000
--- a/drivers/staging/se401/se401.h
+++ /dev/null
@@ -1,236 +0,0 @@
-
-#ifndef __LINUX_se401_H
-#define __LINUX_se401_H
-
-#include <linux/uaccess.h>
-#include "videodev.h"
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/mutex.h>
-
-#define se401_DEBUG	/* Turn on debug messages */
-
-#ifdef se401_DEBUG
-#  define PDEBUG(level, fmt, args...) \
-if (debug >= level) \
-	info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args)
-#else
-#  define PDEBUG(level, fmt, args...) do {} while (0)
-#endif
-
-/* An almost drop-in replacement for sleep_on_interruptible */
-#define wait_interruptible(test, queue, wait) \
-{ \
-	add_wait_queue(queue, wait); \
-	set_current_state(TASK_INTERRUPTIBLE); \
-	if (test) \
-		schedule(); \
-	remove_wait_queue(queue, wait); \
-	set_current_state(TASK_RUNNING); \
-	if (signal_pending(current)) \
-		break; \
-}
-
-#define SE401_REQ_GET_CAMERA_DESCRIPTOR		0x06
-#define SE401_REQ_START_CONTINUOUS_CAPTURE	0x41
-#define SE401_REQ_STOP_CONTINUOUS_CAPTURE	0x42
-#define SE401_REQ_CAPTURE_FRAME			0x43
-#define SE401_REQ_GET_BRT			0x44
-#define SE401_REQ_SET_BRT			0x45
-#define SE401_REQ_GET_WIDTH			0x4c
-#define SE401_REQ_SET_WIDTH			0x4d
-#define SE401_REQ_GET_HEIGHT			0x4e
-#define SE401_REQ_SET_HEIGHT			0x4f
-#define SE401_REQ_GET_OUTPUT_MODE		0x50
-#define SE401_REQ_SET_OUTPUT_MODE		0x51
-#define SE401_REQ_GET_EXT_FEATURE		0x52
-#define SE401_REQ_SET_EXT_FEATURE		0x53
-#define SE401_REQ_CAMERA_POWER			0x56
-#define SE401_REQ_LED_CONTROL			0x57
-#define SE401_REQ_BIOS				0xff
-
-#define SE401_BIOS_READ				0x07
-
-#define SE401_FORMAT_BAYER	0x40
-
-/* Hyundai hv7131b registers
-   7121 and 7141 should be the same (haven't really checked...) */
-/* Mode registers: */
-#define HV7131_REG_MODE_A		0x00
-#define HV7131_REG_MODE_B		0x01
-#define HV7131_REG_MODE_C		0x02
-/* Frame registers: */
-#define HV7131_REG_FRSU		0x10
-#define HV7131_REG_FRSL		0x11
-#define HV7131_REG_FCSU		0x12
-#define HV7131_REG_FCSL		0x13
-#define HV7131_REG_FWHU		0x14
-#define HV7131_REG_FWHL		0x15
-#define HV7131_REG_FWWU		0x16
-#define HV7131_REG_FWWL		0x17
-/* Timing registers: */
-#define HV7131_REG_THBU		0x20
-#define HV7131_REG_THBL		0x21
-#define HV7131_REG_TVBU		0x22
-#define HV7131_REG_TVBL		0x23
-#define HV7131_REG_TITU		0x25
-#define HV7131_REG_TITM		0x26
-#define HV7131_REG_TITL		0x27
-#define HV7131_REG_TMCD		0x28
-/* Adjust Registers: */
-#define HV7131_REG_ARLV		0x30
-#define HV7131_REG_ARCG		0x31
-#define HV7131_REG_AGCG		0x32
-#define HV7131_REG_ABCG		0x33
-#define HV7131_REG_APBV		0x34
-#define HV7131_REG_ASLP		0x54
-/* Offset Registers: */
-#define HV7131_REG_OFSR		0x50
-#define HV7131_REG_OFSG		0x51
-#define HV7131_REG_OFSB		0x52
-/* REset level statistics registers: */
-#define HV7131_REG_LOREFNOH	0x57
-#define HV7131_REG_LOREFNOL	0x58
-#define HV7131_REG_HIREFNOH	0x59
-#define HV7131_REG_HIREFNOL	0x5a
-
-/* se401 registers */
-#define SE401_OPERATINGMODE	0x2000
-
-
-/* size of usb transfers */
-#define SE401_PACKETSIZE	4096
-/* number of queued bulk transfers to use, should be about 8 */
-#define SE401_NUMSBUF		1
-/* read the usb specs for this one :) */
-#define SE401_VIDEO_ENDPOINT	1
-#define SE401_BUTTON_ENDPOINT	2
-/* number of frames supported by the v4l part */
-#define SE401_NUMFRAMES		2
-/* scratch buffers for passing data to the decoders */
-#define SE401_NUMSCRATCH	32
-/* maximum amount of data in a JangGu packet */
-#define SE401_VLCDATALEN	1024
-/* number of nul sized packets to receive before kicking the camera */
-#define SE401_MAX_NULLPACKETS	4000
-/* number of decoding errors before kicking the camera */
-#define SE401_MAX_ERRORS	200
-
-struct usb_device;
-
-struct se401_sbuf {
-	unsigned char *data;
-};
-
-enum {
-	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
-	FRAME_READY,		/* Ready to start grabbing */
-	FRAME_GRABBING,		/* In the process of being grabbed into */
-	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
-	FRAME_ERROR,		/* Something bad happened while processing */
-};
-
-enum {
-	FMT_BAYER,
-	FMT_JANGGU,
-};
-
-enum {
-	BUFFER_UNUSED,
-	BUFFER_READY,
-	BUFFER_BUSY,
-	BUFFER_DONE,
-};
-
-struct se401_scratch {
-	unsigned char *data;
-	volatile int state;
-	int offset;
-	int length;
-};
-
-struct se401_frame {
-	unsigned char *data;		/* Frame buffer */
-
-	volatile int grabstate;	/* State of grabbing */
-
-	unsigned char *curline;
-	int curlinepix;
-	int curpix;
-};
-
-struct usb_se401 {
-	struct video_device vdev;
-
-	/* Device structure */
-	struct usb_device *dev;
-
-	unsigned char iface;
-
-	char *camera_name;
-
-	int change;
-	int brightness;
-	int hue;
-	int rgain;
-	int ggain;
-	int bgain;
-	int expose_h;
-	int expose_m;
-	int expose_l;
-	int resetlevel;
-
-	int enhance;
-
-	int format;
-	int sizes;
-	int *width;
-	int *height;
-	int cwidth;		/* current width */
-	int cheight;		/* current height */
-	int palette;
-	int maxframesize;
-	int cframesize;		/* current framesize */
-
-	struct mutex lock;
-	int user;		/* user count for exclusive use */
-	int removed;		/* device disconnected */
-
-	int streaming;		/* Are we streaming video? */
-
-	char *fbuf;		/* Videodev buffer area */
-
-	struct urb *urb[SE401_NUMSBUF];
-	struct urb *inturb;
-
-	int button;
-	int buttonpressed;
-
-	int curframe;		/* Current receiving frame */
-	struct se401_frame frame[SE401_NUMFRAMES];
-	int readcount;
-	int framecount;
-	int error;
-	int dropped;
-
-	int scratch_next;
-	int scratch_use;
-	int scratch_overflow;
-	struct se401_scratch scratch[SE401_NUMSCRATCH];
-
-	/* Decoder specific data: */
-	unsigned char vlcdata[SE401_VLCDATALEN];
-	int vlcdatapos;
-	int bayeroffset;
-
-	struct se401_sbuf sbuf[SE401_NUMSBUF];
-
-	wait_queue_head_t wq;	/* Processes waiting */
-
-	int nullpackets;
-};
-
-
-
-#endif
-
diff --git a/drivers/staging/se401/videodev.h b/drivers/staging/se401/videodev.h
deleted file mode 100644
index f11efbef1c05..000000000000
--- a/drivers/staging/se401/videodev.h
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- *	Video for Linux version 1 - OBSOLETE
- *
- *	Header file for v4l1 drivers and applications, for
- *	Linux kernels 2.2.x or 2.4.x.
- *
- *	Provides header for legacy drivers and applications
- *
- *	See http://linuxtv.org for more info
- *
- */
-#ifndef __LINUX_VIDEODEV_H
-#define __LINUX_VIDEODEV_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/videodev2.h>
-
-#define VID_TYPE_CAPTURE	1	/* Can capture */
-#define VID_TYPE_TUNER		2	/* Can tune */
-#define VID_TYPE_TELETEXT	4	/* Does teletext */
-#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
-#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
-#define VID_TYPE_CLIPPING	32	/* Can clip */
-#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
-#define VID_TYPE_SCALES		128	/* Scalable */
-#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
-#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
-#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
-#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
-#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
-#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
-
-struct video_capability
-{
-	char name[32];
-	int type;
-	int channels;	/* Num channels */
-	int audios;	/* Num audio devices */
-	int maxwidth;	/* Supported width */
-	int maxheight;	/* And height */
-	int minwidth;	/* Supported width */
-	int minheight;	/* And height */
-};
-
-
-struct video_channel
-{
-	int channel;
-	char name[32];
-	int tuners;
-	__u32  flags;
-#define VIDEO_VC_TUNER		1	/* Channel has a tuner */
-#define VIDEO_VC_AUDIO		2	/* Channel has audio */
-	__u16  type;
-#define VIDEO_TYPE_TV		1
-#define VIDEO_TYPE_CAMERA	2
-	__u16 norm;			/* Norm set by channel */
-};
-
-struct video_tuner
-{
-	int tuner;
-	char name[32];
-	unsigned long rangelow, rangehigh;	/* Tuner range */
-	__u32 flags;
-#define VIDEO_TUNER_PAL		1
-#define VIDEO_TUNER_NTSC	2
-#define VIDEO_TUNER_SECAM	4
-#define VIDEO_TUNER_LOW		8	/* Uses KHz not MHz */
-#define VIDEO_TUNER_NORM	16	/* Tuner can set norm */
-#define VIDEO_TUNER_STEREO_ON	128	/* Tuner is seeing stereo */
-#define VIDEO_TUNER_RDS_ON      256     /* Tuner is seeing an RDS datastream */
-#define VIDEO_TUNER_MBS_ON      512     /* Tuner is seeing an MBS datastream */
-	__u16 mode;			/* PAL/NTSC/SECAM/OTHER */
-#define VIDEO_MODE_PAL		0
-#define VIDEO_MODE_NTSC		1
-#define VIDEO_MODE_SECAM	2
-#define VIDEO_MODE_AUTO		3
-	__u16 signal;			/* Signal strength 16bit scale */
-};
-
-struct video_picture
-{
-	__u16	brightness;
-	__u16	hue;
-	__u16	colour;
-	__u16	contrast;
-	__u16	whiteness;	/* Black and white only */
-	__u16	depth;		/* Capture depth */
-	__u16   palette;	/* Palette in use */
-#define VIDEO_PALETTE_GREY	1	/* Linear greyscale */
-#define VIDEO_PALETTE_HI240	2	/* High 240 cube (BT848) */
-#define VIDEO_PALETTE_RGB565	3	/* 565 16 bit RGB */
-#define VIDEO_PALETTE_RGB24	4	/* 24bit RGB */
-#define VIDEO_PALETTE_RGB32	5	/* 32bit RGB */
-#define VIDEO_PALETTE_RGB555	6	/* 555 15bit RGB */
-#define VIDEO_PALETTE_YUV422	7	/* YUV422 capture */
-#define VIDEO_PALETTE_YUYV	8
-#define VIDEO_PALETTE_UYVY	9	/* The great thing about standards is ... */
-#define VIDEO_PALETTE_YUV420	10
-#define VIDEO_PALETTE_YUV411	11	/* YUV411 capture */
-#define VIDEO_PALETTE_RAW	12	/* RAW capture (BT848) */
-#define VIDEO_PALETTE_YUV422P	13	/* YUV 4:2:2 Planar */
-#define VIDEO_PALETTE_YUV411P	14	/* YUV 4:1:1 Planar */
-#define VIDEO_PALETTE_YUV420P	15	/* YUV 4:2:0 Planar */
-#define VIDEO_PALETTE_YUV410P	16	/* YUV 4:1:0 Planar */
-#define VIDEO_PALETTE_PLANAR	13	/* start of planar entries */
-#define VIDEO_PALETTE_COMPONENT 7	/* start of component entries */
-};
-
-struct video_audio
-{
-	int	audio;		/* Audio channel */
-	__u16	volume;		/* If settable */
-	__u16	bass, treble;
-	__u32	flags;
-#define VIDEO_AUDIO_MUTE	1
-#define VIDEO_AUDIO_MUTABLE	2
-#define VIDEO_AUDIO_VOLUME	4
-#define VIDEO_AUDIO_BASS	8
-#define VIDEO_AUDIO_TREBLE	16
-#define VIDEO_AUDIO_BALANCE	32
-	char    name[16];
-#define VIDEO_SOUND_MONO	1
-#define VIDEO_SOUND_STEREO	2
-#define VIDEO_SOUND_LANG1	4
-#define VIDEO_SOUND_LANG2	8
-	__u16   mode;
-	__u16	balance;	/* Stereo balance */
-	__u16	step;		/* Step actual volume uses */
-};
-
-struct video_clip
-{
-	__s32	x,y;
-	__s32	width, height;
-	struct	video_clip *next;	/* For user use/driver use only */
-};
-
-struct video_window
-{
-	__u32	x,y;			/* Position of window */
-	__u32	width,height;		/* Its size */
-	__u32	chromakey;
-	__u32	flags;
-	struct	video_clip __user *clips;	/* Set only */
-	int	clipcount;
-#define VIDEO_WINDOW_INTERLACE	1
-#define VIDEO_WINDOW_CHROMAKEY	16	/* Overlay by chromakey */
-#define VIDEO_CLIP_BITMAP	-1
-/* bitmap is 1024x625, a '1' bit represents a clipped pixel */
-#define VIDEO_CLIPMAP_SIZE	(128 * 625)
-};
-
-struct video_capture
-{
-	__u32 	x,y;			/* Offsets into image */
-	__u32	width, height;		/* Area to capture */
-	__u16	decimation;		/* Decimation divider */
-	__u16	flags;			/* Flags for capture */
-#define VIDEO_CAPTURE_ODD		0	/* Temporal */
-#define VIDEO_CAPTURE_EVEN		1
-};
-
-struct video_buffer
-{
-	void	*base;
-	int	height,width;
-	int	depth;
-	int	bytesperline;
-};
-
-struct video_mmap
-{
-	unsigned	int frame;		/* Frame (0 - n) for double buffer */
-	int		height,width;
-	unsigned	int format;		/* should be VIDEO_PALETTE_* */
-};
-
-struct video_key
-{
-	__u8	key[8];
-	__u32	flags;
-};
-
-struct video_mbuf
-{
-	int	size;		/* Total memory to map */
-	int	frames;		/* Frames */
-	int	offsets[VIDEO_MAX_FRAME];
-};
-
-#define 	VIDEO_NO_UNIT	(-1)
-
-struct video_unit
-{
-	int 	video;		/* Video minor */
-	int	vbi;		/* VBI minor */
-	int	radio;		/* Radio minor */
-	int	audio;		/* Audio minor */
-	int	teletext;	/* Teletext minor */
-};
-
-struct vbi_format {
-	__u32	sampling_rate;	/* in Hz */
-	__u32	samples_per_line;
-	__u32	sample_format;	/* VIDEO_PALETTE_RAW only (1 byte) */
-	__s32	start[2];	/* starting line for each frame */
-	__u32	count[2];	/* count of lines for each frame */
-	__u32	flags;
-#define	VBI_UNSYNC	1	/* can distingues between top/bottom field */
-#define	VBI_INTERLACED	2	/* lines are interlaced */
-};
-
-/* video_info is biased towards hardware mpeg encode/decode */
-/* but it could apply generically to any hardware compressor/decompressor */
-struct video_info
-{
-	__u32	frame_count;	/* frames output since decode/encode began */
-	__u32	h_size;		/* current unscaled horizontal size */
-	__u32	v_size;		/* current unscaled veritcal size */
-	__u32	smpte_timecode;	/* current SMPTE timecode (for current GOP) */
-	__u32	picture_type;	/* current picture type */
-	__u32	temporal_reference;	/* current temporal reference */
-	__u8	user_data[256];	/* user data last found in compressed stream */
-	/* user_data[0] contains user data flags, user_data[1] has count */
-};
-
-/* generic structure for setting playback modes */
-struct video_play_mode
-{
-	int	mode;
-	int	p1;
-	int	p2;
-};
-
-/* for loading microcode / fpga programming */
-struct video_code
-{
-	char	loadwhat[16];	/* name or tag of file being passed */
-	int	datasize;
-	__u8	*data;
-};
-
-#define VIDIOCGCAP		_IOR('v',1,struct video_capability)	/* Get capabilities */
-#define VIDIOCGCHAN		_IOWR('v',2,struct video_channel)	/* Get channel info (sources) */
-#define VIDIOCSCHAN		_IOW('v',3,struct video_channel)	/* Set channel 	*/
-#define VIDIOCGTUNER		_IOWR('v',4,struct video_tuner)		/* Get tuner abilities */
-#define VIDIOCSTUNER		_IOW('v',5,struct video_tuner)		/* Tune the tuner for the current channel */
-#define VIDIOCGPICT		_IOR('v',6,struct video_picture)	/* Get picture properties */
-#define VIDIOCSPICT		_IOW('v',7,struct video_picture)	/* Set picture properties */
-#define VIDIOCCAPTURE		_IOW('v',8,int)				/* Start, end capture */
-#define VIDIOCGWIN		_IOR('v',9, struct video_window)	/* Get the video overlay window */
-#define VIDIOCSWIN		_IOW('v',10, struct video_window)	/* Set the video overlay window - passes clip list for hardware smarts , chromakey etc */
-#define VIDIOCGFBUF		_IOR('v',11, struct video_buffer)	/* Get frame buffer */
-#define VIDIOCSFBUF		_IOW('v',12, struct video_buffer)	/* Set frame buffer - root only */
-#define VIDIOCKEY		_IOR('v',13, struct video_key)		/* Video key event - to dev 255 is to all - cuts capture on all DMA windows with this key (0xFFFFFFFF == all) */
-#define VIDIOCGFREQ		_IOR('v',14, unsigned long)		/* Set tuner */
-#define VIDIOCSFREQ		_IOW('v',15, unsigned long)		/* Set tuner */
-#define VIDIOCGAUDIO		_IOR('v',16, struct video_audio)	/* Get audio info */
-#define VIDIOCSAUDIO		_IOW('v',17, struct video_audio)	/* Audio source, mute etc */
-#define VIDIOCSYNC		_IOW('v',18, int)			/* Sync with mmap grabbing */
-#define VIDIOCMCAPTURE		_IOW('v',19, struct video_mmap)		/* Grab frames */
-#define VIDIOCGMBUF		_IOR('v',20, struct video_mbuf)		/* Memory map buffer info */
-#define VIDIOCGUNIT		_IOR('v',21, struct video_unit)		/* Get attached units */
-#define VIDIOCGCAPTURE		_IOR('v',22, struct video_capture)	/* Get subcapture */
-#define VIDIOCSCAPTURE		_IOW('v',23, struct video_capture)	/* Set subcapture */
-#define VIDIOCSPLAYMODE		_IOW('v',24, struct video_play_mode)	/* Set output video mode/feature */
-#define VIDIOCSWRITEMODE	_IOW('v',25, int)			/* Set write mode */
-#define VIDIOCGPLAYINFO		_IOR('v',26, struct video_info)		/* Get current playback info from hardware */
-#define VIDIOCSMICROCODE	_IOW('v',27, struct video_code)		/* Load microcode into hardware */
-#define	VIDIOCGVBIFMT		_IOR('v',28, struct vbi_format)		/* Get VBI information */
-#define	VIDIOCSVBIFMT		_IOW('v',29, struct vbi_format)		/* Set VBI information */
-
-
-#define BASE_VIDIOCPRIVATE	192		/* 192-255 are private */
-
-/* VIDIOCSWRITEMODE */
-#define VID_WRITE_MPEG_AUD		0
-#define VID_WRITE_MPEG_VID		1
-#define VID_WRITE_OSD			2
-#define VID_WRITE_TTX			3
-#define VID_WRITE_CC			4
-#define VID_WRITE_MJPEG			5
-
-/* VIDIOCSPLAYMODE */
-#define VID_PLAY_VID_OUT_MODE		0
-	/* p1: = VIDEO_MODE_PAL, VIDEO_MODE_NTSC, etc ... */
-#define VID_PLAY_GENLOCK		1
-	/* p1: 0 = OFF, 1 = ON */
-	/* p2: GENLOCK FINE DELAY value */
-#define VID_PLAY_NORMAL			2
-#define VID_PLAY_PAUSE			3
-#define VID_PLAY_SINGLE_FRAME		4
-#define VID_PLAY_FAST_FORWARD		5
-#define VID_PLAY_SLOW_MOTION		6
-#define VID_PLAY_IMMEDIATE_NORMAL	7
-#define VID_PLAY_SWITCH_CHANNELS	8
-#define VID_PLAY_FREEZE_FRAME		9
-#define VID_PLAY_STILL_MODE		10
-#define VID_PLAY_MASTER_MODE		11
-	/* p1: see below */
-#define		VID_PLAY_MASTER_NONE	1
-#define		VID_PLAY_MASTER_VIDEO	2
-#define		VID_PLAY_MASTER_AUDIO	3
-#define VID_PLAY_ACTIVE_SCANLINES	12
-	/* p1 = first active; p2 = last active */
-#define VID_PLAY_RESET			13
-#define VID_PLAY_END_MARK		14
-
-#endif /* __LINUX_VIDEODEV_H */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */