diff options
author | Nikolay Aleksandrov <nikolay@redhat.com> | 2013-10-02 13:39:25 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2013-10-03 15:36:38 -0400 |
commit | 32819dc1834866cb9547cb75f81af9edd58d33cd (patch) | |
tree | a624e228d0e8ca80ee302af4904d9c19551aa2c7 /drivers | |
parent | 357afe9c46c951c34769e39cabdf8d1637e2eecc (diff) |
bonding: modify the old and add new xmit hash policies
This patch adds two new hash policy modes which use skb_flow_dissect:
3 - Encapsulated layer 2+3
4 - Encapsulated layer 3+4
There should be a good improvement for tunnel users in those modes.
It also changes the old hash functions to:
hash ^= (__force u32)flow.dst ^ (__force u32)flow.src;
hash ^= (hash >> 16);
hash ^= (hash >> 8);
Where hash will be initialized either to L2 hash, that is
SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted
from the upper layer. Flow's dst and src are also extracted based on the
xmit policy either directly from the buffer or by using skb_flow_dissect,
but in both cases if the protocol is IPv6 then dst and src are obtained by
ipv6_addr_hash() on the real addresses. In case of a non-dissectable
packet, the algorithms fall back to L2 hashing.
The bond_set_mode_ops() function is now obsolete and thus deleted
because it was used only to set the proper hash policy. Also we trim a
pointer from struct bonding because we no longer need to keep the hash
function, now there's only a single hash function - bond_xmit_hash that
works based on bond->params.xmit_policy.
The hash function and skb_flow_dissect were suggested by Eric Dumazet.
The layer names were suggested by Andy Gospodarek, because I suck at
semantics.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/bonding/bond_3ad.c | 2 | ||||
-rw-r--r-- | drivers/net/bonding/bond_main.c | 197 | ||||
-rw-r--r-- | drivers/net/bonding/bond_sysfs.c | 2 | ||||
-rw-r--r-- | drivers/net/bonding/bonding.h | 3 |
4 files changed, 70 insertions, 134 deletions
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index c62606a67f6a..ea3e64e22e22 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2403,7 +2403,7 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) goto out; } - slave_agg_no = bond->xmit_hash_policy(skb, slaves_in_agg); + slave_agg_no = bond_xmit_hash(bond, skb, slaves_in_agg); first_ok_slave = NULL; bond_for_each_slave(bond, slave, iter) { diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index fe8a94f9d7db..dfb4f6dd5de0 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -78,6 +78,7 @@ #include <net/netns/generic.h> #include <net/pkt_sched.h> #include <linux/rculist.h> +#include <net/flow_keys.h> #include "bonding.h" #include "bond_3ad.h" #include "bond_alb.h" @@ -159,7 +160,8 @@ MODULE_PARM_DESC(min_links, "Minimum number of available links before turning on module_param(xmit_hash_policy, charp, 0); MODULE_PARM_DESC(xmit_hash_policy, "balance-xor and 802.3ad hashing method; " "0 for layer 2 (default), 1 for layer 3+4, " - "2 for layer 2+3"); + "2 for layer 2+3, 3 for encap layer 2+3, " + "4 for encap layer 3+4"); module_param(arp_interval, int, 0); MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds"); module_param_array(arp_ip_target, charp, NULL, 0); @@ -217,6 +219,8 @@ const struct bond_parm_tbl xmit_hashtype_tbl[] = { { "layer2", BOND_XMIT_POLICY_LAYER2}, { "layer3+4", BOND_XMIT_POLICY_LAYER34}, { "layer2+3", BOND_XMIT_POLICY_LAYER23}, +{ "encap2+3", BOND_XMIT_POLICY_ENCAP23}, +{ "encap3+4", BOND_XMIT_POLICY_ENCAP34}, { NULL, -1}, }; @@ -3035,99 +3039,85 @@ static struct notifier_block bond_netdev_notifier = { /*---------------------------- Hashing Policies -----------------------------*/ -/* - * Hash for the output device based upon layer 2 data - */ -static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count) +/* L2 hash helper */ +static inline u32 bond_eth_hash(struct sk_buff *skb) { struct ethhdr *data = (struct ethhdr *)skb->data; if (skb_headlen(skb) >= offsetof(struct ethhdr, h_proto)) - return (data->h_dest[5] ^ data->h_source[5]) % count; + return data->h_dest[5] ^ data->h_source[5]; return 0; } -/* - * Hash for the output device based upon layer 2 and layer 3 data. If - * the packet is not IP, fall back on bond_xmit_hash_policy_l2() - */ -static int bond_xmit_hash_policy_l23(struct sk_buff *skb, int count) +/* Extract the appropriate headers based on bond's xmit policy */ +static bool bond_flow_dissect(struct bonding *bond, struct sk_buff *skb, + struct flow_keys *fk) { - const struct ethhdr *data; + const struct ipv6hdr *iph6; const struct iphdr *iph; - const struct ipv6hdr *ipv6h; - u32 v6hash; - const __be32 *s, *d; + int noff, proto = -1; - if (skb->protocol == htons(ETH_P_IP) && - pskb_network_may_pull(skb, sizeof(*iph))) { + if (bond->params.xmit_policy > BOND_XMIT_POLICY_LAYER23) + return skb_flow_dissect(skb, fk); + + fk->ports = 0; + noff = skb_network_offset(skb); + if (skb->protocol == htons(ETH_P_IP)) { + if (!pskb_may_pull(skb, noff + sizeof(*iph))) + return false; iph = ip_hdr(skb); - data = (struct ethhdr *)skb->data; - return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^ - (data->h_dest[5] ^ data->h_source[5])) % count; - } else if (skb->protocol == htons(ETH_P_IPV6) && - pskb_network_may_pull(skb, sizeof(*ipv6h))) { - ipv6h = ipv6_hdr(skb); - data = (struct ethhdr *)skb->data; - s = &ipv6h->saddr.s6_addr32[0]; - d = &ipv6h->daddr.s6_addr32[0]; - v6hash = (s[1] ^ d[1]) ^ (s[2] ^ d[2]) ^ (s[3] ^ d[3]); - v6hash ^= (v6hash >> 24) ^ (v6hash >> 16) ^ (v6hash >> 8); - return (v6hash ^ data->h_dest[5] ^ data->h_source[5]) % count; - } - - return bond_xmit_hash_policy_l2(skb, count); + fk->src = iph->saddr; + fk->dst = iph->daddr; + noff += iph->ihl << 2; + if (!ip_is_fragment(iph)) + proto = iph->protocol; + } else if (skb->protocol == htons(ETH_P_IPV6)) { + if (!pskb_may_pull(skb, noff + sizeof(*iph6))) + return false; + iph6 = ipv6_hdr(skb); + fk->src = (__force __be32)ipv6_addr_hash(&iph6->saddr); + fk->dst = (__force __be32)ipv6_addr_hash(&iph6->daddr); + noff += sizeof(*iph6); + proto = iph6->nexthdr; + } else { + return false; + } + if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34 && proto >= 0) + fk->ports = skb_flow_get_ports(skb, noff, proto); + + return true; } -/* - * Hash for the output device based upon layer 3 and layer 4 data. If - * the packet is a frag or not TCP or UDP, just use layer 3 data. If it is - * altogether not IP, fall back on bond_xmit_hash_policy_l2() +/** + * bond_xmit_hash - generate a hash value based on the xmit policy + * @bond: bonding device + * @skb: buffer to use for headers + * @count: modulo value + * + * This function will extract the necessary headers from the skb buffer and use + * them to generate a hash based on the xmit_policy set in the bonding device + * which will be reduced modulo count before returning. */ -static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count) +int bond_xmit_hash(struct bonding *bond, struct sk_buff *skb, int count) { - u32 layer4_xor = 0; - const struct iphdr *iph; - const struct ipv6hdr *ipv6h; - const __be32 *s, *d; - const __be16 *l4 = NULL; - __be16 _l4[2]; - int noff = skb_network_offset(skb); - int poff; - - if (skb->protocol == htons(ETH_P_IP) && - pskb_may_pull(skb, noff + sizeof(*iph))) { - iph = ip_hdr(skb); - poff = proto_ports_offset(iph->protocol); + struct flow_keys flow; + u32 hash; - if (!ip_is_fragment(iph) && poff >= 0) { - l4 = skb_header_pointer(skb, noff + (iph->ihl << 2) + poff, - sizeof(_l4), &_l4); - if (l4) - layer4_xor = ntohs(l4[0] ^ l4[1]); - } - return (layer4_xor ^ - ((ntohl(iph->saddr ^ iph->daddr)) & 0xffff)) % count; - } else if (skb->protocol == htons(ETH_P_IPV6) && - pskb_may_pull(skb, noff + sizeof(*ipv6h))) { - ipv6h = ipv6_hdr(skb); - poff = proto_ports_offset(ipv6h->nexthdr); - if (poff >= 0) { - l4 = skb_header_pointer(skb, noff + sizeof(*ipv6h) + poff, - sizeof(_l4), &_l4); - if (l4) - layer4_xor = ntohs(l4[0] ^ l4[1]); - } - s = &ipv6h->saddr.s6_addr32[0]; - d = &ipv6h->daddr.s6_addr32[0]; - layer4_xor ^= (s[1] ^ d[1]) ^ (s[2] ^ d[2]) ^ (s[3] ^ d[3]); - layer4_xor ^= (layer4_xor >> 24) ^ (layer4_xor >> 16) ^ - (layer4_xor >> 8); - return layer4_xor % count; - } + if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER2 || + !bond_flow_dissect(bond, skb, &flow)) + return bond_eth_hash(skb) % count; + + if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER23 || + bond->params.xmit_policy == BOND_XMIT_POLICY_ENCAP23) + hash = bond_eth_hash(skb); + else + hash = (__force u32)flow.ports; + hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; + hash ^= (hash >> 16); + hash ^= (hash >> 8); - return bond_xmit_hash_policy_l2(skb, count); + return hash % count; } /*-------------------------- Device entry points ----------------------------*/ @@ -3721,8 +3711,7 @@ static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_d return NETDEV_TX_OK; } -/* - * In bond_xmit_xor() , we determine the output device by using a pre- +/* In bond_xmit_xor() , we determine the output device by using a pre- * determined xmit_hash_policy(), If the selected device is not enabled, * find the next active slave. */ @@ -3730,8 +3719,7 @@ static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev) { struct bonding *bond = netdev_priv(bond_dev); - bond_xmit_slave_id(bond, skb, - bond->xmit_hash_policy(skb, bond->slave_cnt)); + bond_xmit_slave_id(bond, skb, bond_xmit_hash(bond, skb, bond->slave_cnt)); return NETDEV_TX_OK; } @@ -3768,22 +3756,6 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev) /*------------------------- Device initialization ---------------------------*/ -static void bond_set_xmit_hash_policy(struct bonding *bond) -{ - switch (bond->params.xmit_policy) { - case BOND_XMIT_POLICY_LAYER23: - bond->xmit_hash_policy = bond_xmit_hash_policy_l23; - break; - case BOND_XMIT_POLICY_LAYER34: - bond->xmit_hash_policy = bond_xmit_hash_policy_l34; - break; - case BOND_XMIT_POLICY_LAYER2: - default: - bond->xmit_hash_policy = bond_xmit_hash_policy_l2; - break; - } -} - /* * Lookup the slave that corresponds to a qid */ @@ -3894,38 +3866,6 @@ static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev) return ret; } -/* - * set bond mode specific net device operations - */ -void bond_set_mode_ops(struct bonding *bond, int mode) -{ - struct net_device *bond_dev = bond->dev; - - switch (mode) { - case BOND_MODE_ROUNDROBIN: - break; - case BOND_MODE_ACTIVEBACKUP: - break; - case BOND_MODE_XOR: - bond_set_xmit_hash_policy(bond); - break; - case BOND_MODE_BROADCAST: - break; - case BOND_MODE_8023AD: - bond_set_xmit_hash_policy(bond); - break; - case BOND_MODE_ALB: - /* FALLTHRU */ - case BOND_MODE_TLB: - break; - default: - /* Should never happen, mode already checked */ - pr_err("%s: Error: Unknown bonding mode %d\n", - bond_dev->name, mode); - break; - } -} - static int bond_ethtool_get_settings(struct net_device *bond_dev, struct ethtool_cmd *ecmd) { @@ -4027,7 +3967,6 @@ static void bond_setup(struct net_device *bond_dev) ether_setup(bond_dev); bond_dev->netdev_ops = &bond_netdev_ops; bond_dev->ethtool_ops = &bond_ethtool_ops; - bond_set_mode_ops(bond, bond->params.mode); bond_dev->destructor = bond_destructor; diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index e06c644470b1..e9249527e7e7 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -318,7 +318,6 @@ static ssize_t bonding_store_mode(struct device *d, /* don't cache arp_validate between modes */ bond->params.arp_validate = BOND_ARP_VALIDATE_NONE; bond->params.mode = new_value; - bond_set_mode_ops(bond, bond->params.mode); pr_info("%s: setting mode to %s (%d).\n", bond->dev->name, bond_mode_tbl[new_value].modename, new_value); @@ -358,7 +357,6 @@ static ssize_t bonding_store_xmit_hash(struct device *d, ret = -EINVAL; } else { bond->params.xmit_policy = new_value; - bond_set_mode_ops(bond, bond->params.mode); pr_info("%s: setting xmit hash policy to %s (%d).\n", bond->dev->name, xmit_hashtype_tbl[new_value].modename, new_value); diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 9a26fbd82645..0bd04fbda8e9 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -217,7 +217,6 @@ struct bonding { char proc_file_name[IFNAMSIZ]; #endif /* CONFIG_PROC_FS */ struct list_head bond_list; - int (*xmit_hash_policy)(struct sk_buff *, int); u16 rr_tx_counter; struct ad_bond_info ad_info; struct alb_bond_info alb_info; @@ -409,7 +408,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev); void bond_mii_monitor(struct work_struct *); void bond_loadbalance_arp_mon(struct work_struct *); void bond_activebackup_arp_mon(struct work_struct *); -void bond_set_mode_ops(struct bonding *bond, int mode); +int bond_xmit_hash(struct bonding *bond, struct sk_buff *skb, int count); int bond_parse_parm(const char *mode_arg, const struct bond_parm_tbl *tbl); void bond_select_active_slave(struct bonding *bond); void bond_change_active_slave(struct bonding *bond, struct slave *new_active); |