Staging: dt3155: remove compat code

Remove compatibility code as this is not an older version of the kernel.

Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

6 files changed, 8 insertions, 1073 deletions

diff --git a/drivers/staging/dt3155/allocator.c b/drivers/staging/dt3155/allocator.c
index c1b85447c0e0..4983c9379e57 100644
--- a/drivers/staging/dt3155/allocator.c
+++ b/drivers/staging/dt3155/allocator.c
@@ -54,11 +54,10 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/mm.h>	/* PAGE_ALIGN() */
+#include <linux/io.h>
 
 #include <asm/page.h>
 
-#include "sysdep.h"
-
 /*#define ALL_DEBUG*/
 #define ALL_MSG "allocator: "
 
diff --git a/drivers/staging/dt3155/dt3155_drv.c b/drivers/staging/dt3155/dt3155_drv.c
index 950956c08eda..6b40d422ad0c 100644
--- a/drivers/staging/dt3155/dt3155_drv.c
+++ b/drivers/staging/dt3155/dt3155_drv.c
@@ -59,13 +59,10 @@ extern void printques(int);
 
 #ifdef MODULE
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/interrupt.h>
 
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,10)
 MODULE_LICENSE("GPL");
-#endif
 
 #endif
 
@@ -105,11 +102,7 @@ int dt3155_errno = 0;
 #endif
 
 /* wait queue for interrupts */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,1)
 wait_queue_head_t dt3155_read_wait_queue[ MAXBOARDS ];
-#else
-struct wait_queue *dt3155_read_wait_queue[ MAXBOARDS ];
-#endif
 
 #define DT_3155_SUCCESS 0
 #define DT_3155_FAILURE -EIO
@@ -186,11 +179,7 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
 {
   int    minor = -1;
   int    index;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
   unsigned long flags;
-#else
-  int    flags;
-#endif
   u_long buffer_addr;
 
   /* find out who issued the interrupt */
@@ -264,21 +253,12 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
 	  buffer_addr = dt3155_fbuffer[ minor ]->
 	    frame_info[ dt3155_fbuffer[ minor ]->active_buf ].addr
 	    + (DT3155_MAX_ROWS / 2) * stride;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
 	  local_save_flags(flags);
 	  local_irq_disable();
-#else
-	  save_flags( flags );
-	  cli();
-#endif
 	  wake_up_interruptible( &dt3155_read_wait_queue[ minor ] );
 
 	  /* Set up the DMA address for the next field */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
 	  local_irq_restore(flags);
-#else
-	  restore_flags( flags );
-#endif
 	  WriteMReg((dt3155_lbase[ minor ] + ODD_DMA_START), buffer_addr);
 	}
 
@@ -350,13 +330,8 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
 	   DT3155_STATE_FLD )
 	{
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
 	  local_save_flags(flags);
 	  local_irq_disable();
-#else
-	  save_flags( flags );
-	  cli();
-#endif
 
 #ifdef DEBUG_QUES_B
 	  printques( minor );
@@ -412,11 +387,7 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
 
 	  wake_up_interruptible( &dt3155_read_wait_queue[ minor ] );
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
 	  local_irq_restore(flags);
-#else
-	  restore_flags( flags );
-#endif
 	}
 
 
@@ -675,11 +646,6 @@ static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
   /* which device are we mmapping? */
   int				minor = MINOR(file->f_dentry->d_inode->i_rdev);
   unsigned long	offset;
-
-  /* not actually sure when vm_area_struct changed,
-     but it was in 2.3 sometime */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,20)
-
   offset = vma->vm_pgoff << PAGE_SHIFT;
 
   if (offset >= __pa(high_memory) || (file->f_flags & O_SYNC))
@@ -688,34 +654,17 @@ static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
   /* Don't try to swap out physical pages.. */
   vma->vm_flags |= VM_RESERVED;
 
-#else
-
-  if (vma->vm_offset & ~PAGE_MASK)
-    return -ENXIO;
-
-  offset = vma->vm_offset;
-
-#endif
-
   /* they are mapping the registers or the buffer */
   if ((offset == dt3155_status[minor].reg_addr &&
        vma->vm_end - vma->vm_start == PCI_PAGE_SIZE) ||
       (offset == dt3155_status[minor].mem_addr &&
        vma->vm_end - vma->vm_start == dt3155_status[minor].mem_size))
     {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
       if (remap_pfn_range(vma,
 			vma->vm_start,
 			offset >> PAGE_SHIFT,
 			vma->vm_end - vma->vm_start,
-			vma->vm_page_prot))
-#else
-      if (remap_page_range(vma->vm_start,
-			   offset,
-			   vma->vm_end - vma->vm_start,
-			   vma->vm_page_prot))
-#endif
-	{
+			vma->vm_page_prot)) {
 	  printk("DT3155: remap_page_range() failed.\n");
 	  return -EAGAIN;
 	}
@@ -761,9 +710,6 @@ static int dt3155_open( struct inode* inode, struct file* filep)
   printk("DT3155: Device opened.\n");
 
   dt3155_dev_open[ minor ] = 1 ;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-  MOD_INC_USE_COUNT;
-#endif
 
   dt3155_flush( minor );
 
@@ -771,11 +717,7 @@ static int dt3155_open( struct inode* inode, struct file* filep)
   int_csr_r.reg = 0;
   WriteMReg( (dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg );
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,1)
   init_waitqueue_head(&(dt3155_read_wait_queue[minor]));
-#else
-  dt3155_read_wait_queue[minor] = NULL;
-#endif
 
   return 0;
 }
@@ -798,9 +740,6 @@ static int dt3155_close( struct inode *inode, struct file *filep)
     }
   else
     {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-      MOD_DEC_USE_COUNT;
-#endif
       dt3155_dev_open[ minor ] = 0;
 
       if (dt3155_status[ minor ].state != DT3155_STATE_IDLE)
@@ -846,8 +785,6 @@ static int dt3155_read (
   /*  if (dt3155_status[minor].state == DT3155_STATE_IDLE)*/
   /*    return -EBUSY;*/
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,1)
-
   /* non-blocking reads should return if no data */
   if (filep->f_flags & O_NDELAY)
     {
@@ -877,34 +814,6 @@ static int dt3155_read (
 	}
     }
 
-#else
-  while ((frame_index = dt3155_get_ready_buffer(minor)) < 0 )
-    {
-      int index;
-      if (filep->f_flags & O_NDELAY)
-	return 0;
-
-      /* sleep till data arrives , or we get interrupted */
-      interruptible_sleep_on(&dt3155_read_wait_queue[minor]);
-      for (index = 0; index < _NSIG_WORDS; index++)
-	{
-	  /*
-	   * Changing the next line of code below to this:
-	   * if (current->pending.signal.sig[index] &
-	   *                           ~current->blocked.sig[index])
-	   * would also work on a 2.4 kernel, however, the above
-	   * method is preferred & more portable.
-	   */
-	  if (current->signal.sig[index] & ~current->blocked.sig[index])
-	    {
-	      printk ("DT3155: read: interrupted\n");
-	      return -EINTR;
-	    }
-	}
-    }
-
-#endif
-
   frame_info_p = &dt3155_status[minor].fbuffer.frame_info[frame_index];
 
   /* make this an offset */
@@ -1046,12 +955,6 @@ int init_module(void)
   int rcode = 0;
   char *devname[ MAXBOARDS ];
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,1)
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-  SET_MODULE_OWNER(&dt3155_fops);
-#endif
-#endif
-
   devname[ 0 ] = "dt3155a";
 #if MAXBOARDS == 2
   devname[ 1 ] = "dt3155b";
@@ -1091,17 +994,6 @@ int init_module(void)
 
   /* Now let's find the hardware.  find_PCI() will set ndevices to the
    * number of cards found in this machine. */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-  if ( !(pcibios_present()) )
-    {
-      printk("DT3155: Error: No PCI bios on this machine \n");
-      if( unregister_chrdev( dt3155_major, "dt3155" ) != 0 )
-	printk("DT3155: cleanup_module failed\n");
-
-      return DT_3155_FAILURE;
-    }
-  else
-#endif
     {
       if ( (rcode = find_PCI()) !=  DT_3155_SUCCESS )
 	{
@@ -1199,10 +1091,5 @@ void cleanup_module(void)
 	  free_irq( dt3155_status[ index ].irq, (void*)&dt3155_status[index] );
 	}
     }
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-  if (MOD_IN_USE)
-    printk("DT3155: device busy, remove delayed\n");
-#endif
 }
 
diff --git a/drivers/staging/dt3155/dt3155_drv.h b/drivers/staging/dt3155/dt3155_drv.h
index dc110b76e463..215399a3d26a 100644
--- a/drivers/staging/dt3155/dt3155_drv.h
+++ b/drivers/staging/dt3155/dt3155_drv.h
@@ -33,13 +33,8 @@ extern u_char *dt3155_bbase;
 #ifdef __KERNEL__
 #include <linux/wait.h>
 
-#include <linux/version.h>	/* need access to LINUX_VERSION_CODE */
 /* wait queue for reads */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 3, 1)
 extern wait_queue_head_t dt3155_read_wait_queue[MAXBOARDS];
-#else
-extern struct wait_queue *dt3155_read_wait_queue[MAXBOARDS];
-#endif
 #endif
 
 /* number of devices */
diff --git a/drivers/staging/dt3155/dt3155_isr.c b/drivers/staging/dt3155/dt3155_isr.c
index 339aee9a0925..54460dbb867a 100644
--- a/drivers/staging/dt3155/dt3155_isr.c
+++ b/drivers/staging/dt3155/dt3155_isr.c
@@ -435,20 +435,11 @@ static inline void internal_release_locked_buffer( int m )
  *****************************************************/
 inline void dt3155_release_locked_buffer( int m )
 {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
 	unsigned long int flags;
 	local_save_flags(flags);
 	local_irq_disable();
 	internal_release_locked_buffer(m);
 	local_irq_restore(flags);
-#else
-  int flags;
-
-  save_flags( flags );
-  cli();
-  internal_release_locked_buffer( m );
-  restore_flags( flags );
-#endif
 }
 
 
@@ -460,15 +451,9 @@ inline void dt3155_release_locked_buffer( int m )
 inline int dt3155_flush( int m )
 {
   int index;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-	unsigned long int flags;
-	local_save_flags(flags);
-	local_irq_disable();
-#else
-  int flags;
-  save_flags( flags );
-  cli();
-#endif
+  unsigned long int flags;
+  local_save_flags(flags);
+  local_irq_disable();
 
   internal_release_locked_buffer( m );
   dt3155_fbuffer[ m ]->empty_len = 0;
@@ -486,11 +471,7 @@ inline int dt3155_flush( int m )
   dt3155_fbuffer[ m ]->ready_head = 0;
   dt3155_fbuffer[ m ]->ready_len = 0;
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
   local_irq_restore(flags);
-#else
-  restore_flags( flags );
-#endif
 
   return 0;
 }
@@ -507,15 +488,9 @@ inline int dt3155_flush( int m )
 inline int dt3155_get_ready_buffer( int m )
 {
   int frame_index;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-	unsigned long int flags;
-	local_save_flags(flags);
-	local_irq_disable();
-#else
-  int flags;
-  save_flags( flags );
-  cli();
-#endif
+  unsigned long int flags;
+  local_save_flags(flags);
+  local_irq_disable();
 
 #ifdef DEBUG_QUES_A
   printques( m );
@@ -535,11 +510,7 @@ inline int dt3155_get_ready_buffer( int m )
   printques( m );
 #endif
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
   local_irq_restore(flags);
-#else
-  restore_flags( flags );
-#endif
 
   return frame_index;
 }
diff --git a/drivers/staging/dt3155/pci-compat.h b/drivers/staging/dt3155/pci-compat.h
deleted file mode 100644
index 5f47d5a94d4b..000000000000
--- a/drivers/staging/dt3155/pci-compat.h
+++ /dev/null
@@ -1,97 +0,0 @@
-
-/* This header only makes send when included in a 2.0 compile */
-
-#ifndef _PCI_COMPAT_H_
-#define _PCI_COMPAT_H_
-
-#ifdef __KERNEL__
-
-#include <linux/bios32.h> /* pcibios_* */
-#include <linux/pci.h> /* pcibios_* */
-#include <linux/malloc.h> /* kmalloc */
-
-/* fake the new pci interface based on the old one: encapsulate bus/devfn */
-struct pci_fake_dev {
-    u8 bus;
-    u8 devfn;
-    int index;
-};
-#define pci_dev pci_fake_dev /* the other pci_dev is unused by 2.0 drivers */
-
-extern inline struct pci_dev *pci_find_device(unsigned int vendorid,
-					      unsigned int devid,
-					      struct pci_dev *from)
-{
-    struct pci_dev *pptr = kmalloc(sizeof(*pptr), GFP_KERNEL);
-    int index = 0;
-    int ret;
-
-    if (!pptr) return NULL;
-    if (from) index = pptr->index + 1;
-    ret = pcibios_find_device(vendorid, devid, index,
-			      &pptr->bus, &pptr->devfn);
-    if (ret) { kfree(pptr); return NULL; }
-    return pptr;
-}
-
-extern inline struct pci_dev *pci_find_class(unsigned int class,
-					     struct pci_dev *from)
-{
-    return NULL; /* FIXME */
-}
-
-extern inline void pci_release_device(struct pci_dev *dev)
-{
-    kfree(dev);
-}
-
-/* struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn); */
-
-#define pci_present pcibios_present
-
-extern inline int
-pci_read_config_byte(struct pci_dev *dev, u8 where, u8 *val)
-{
-    return pcibios_read_config_byte(dev->bus, dev->devfn, where, val);
-}
-
-extern inline int
-pci_read_config_word(struct pci_dev *dev, u8 where, u16 *val)
-{
-    return pcibios_read_config_word(dev->bus, dev->devfn, where, val);
-}
-
-extern inline int
-pci_read_config_dword(struct pci_dev *dev, u8 where, u32 *val)
-{
-    return pcibios_read_config_dword(dev->bus, dev->devfn, where, val);
-}
-
-extern inline int
-pci_write_config_byte(struct pci_dev *dev, u8 where, u8 val)
-{
-    return pcibios_write_config_byte(dev->bus, dev->devfn, where, val);
-}
-
-extern inline int
-pci_write_config_word(struct pci_dev *dev, u8 where, u16 val)
-{
-    return pcibios_write_config_word(dev->bus, dev->devfn, where, val);
-}
-
-extern inline int
-pci_write_config_dword(struct pci_dev *dev, u8 where, u32 val)
-{
-    return pcibios_write_config_dword(dev->bus, dev->devfn, where, val);
-}
-
-extern inline void pci_set_master(struct pci_dev *dev)
-{
-    u16 cmd;
-    pcibios_read_config_word(dev->bus, dev->devfn, PCI_COMMAND, &cmd);
-    cmd |= PCI_COMMAND_MASTER;
-    pcibios_write_config_word(dev->bus, dev->devfn, PCI_COMMAND, cmd);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _PCI_COMPAT_H_ */
diff --git a/drivers/staging/dt3155/sysdep.h b/drivers/staging/dt3155/sysdep.h
deleted file mode 100644
index 1d575d4a53ee..000000000000
--- a/drivers/staging/dt3155/sysdep.h
+++ /dev/null
@@ -1,820 +0,0 @@
-/*
- * sysdep.h -- centralizing compatibility issues between 2.0, 2.2, 2.4
- *
- * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet
- * Copyright (C) 2001 O'Reilly & Associates
- *
- * The source code in this file can be freely used, adapted,
- * and redistributed in source or binary form, so long as an
- * acknowledgment appears in derived source files.  The citation
- * should list that the code comes from the book "Linux Device
- * Drivers" by Alessandro Rubini and Jonathan Corbet, published
- * by O'Reilly & Associates.   No warranty is attached;
- * we cannot take responsibility for errors or fitness for use.
- *
- * $Id: sysdep.h,v 1.2 2005/08/09 06:08:51 ssmedley Exp $
- */
-
-
-#ifndef _SYSDEP_H_
-#define _SYSDEP_H_
-
-#ifndef LINUX_VERSION_CODE
-#  include <linux/version.h>
-#endif
-
-#ifndef KERNEL_VERSION /* pre-2.1.90 didn't have it */
-#  define KERNEL_VERSION(vers,rel,seq) ( ((vers)<<16) | ((rel)<<8) | (seq) )
-#endif
-
-/* only allow 2.0.x  2.2.y and 2.4.z */
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,0,0) /* not < 2.0 */
-#  error "This kernel is too old: not supported by this file"
-#endif
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,7,0) /* not > 2.7, by now */
-#  error "This kernel is too recent: not supported by this file"
-#endif
-#if (LINUX_VERSION_CODE & 0xff00) == 1 /* not 2.1 */
-#  error "Please don't use linux-2.1, use 2.2, 2.4 or 2.6 instead"
-#endif
-#if (LINUX_VERSION_CODE & 0xff00) == 3 /* not 2.3 */
-#  error "Please don't use linux-2.3, use 2.4 or 2.6 instead"
-#endif
-
-/* remember about the current version */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,1,0)
-#  define LINUX_20
-#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)
-#  define LINUX_22
-#else
-#  define LINUX_24
-#endif
-
-/* we can't support versioning in pre-2.4 because we #define some functions */
-#if !defined(LINUX_24) && defined(CONFIG_MODVERSIONS)
-#  error "This sysdep.h can't support CONFIG_MODVERSIONS"
-#  error "and old kernels at the same time."
-#  error "Either use 2.4 or avoid using versioning"
-#endif
-
-#ifndef LINUX_20 /* include vmalloc.h if this is 2.2/2.4 */
-#  ifdef VM_READ /* a typical flag defined by mm.h */
-#    include <linux/vmalloc.h>
-#  endif
-#endif
-
-#include <linux/sched.h>
-
-/* Modularization issues */
-#ifdef LINUX_20
-#  define __USE_OLD_SYMTAB__
-#  define EXPORT_NO_SYMBOLS register_symtab(NULL);
-#  define REGISTER_SYMTAB(tab) register_symtab(tab)
-#else
-#  define REGISTER_SYMTAB(tab) /* nothing */
-#endif
-
-#ifdef __USE_OLD_SYMTAB__
-#  define __MODULE_STRING(s)         /* nothing */
-#  define MODULE_PARM(v,t)           /* nothing */
-#  define MODULE_PARM_DESC(v,t)      /* nothing */
-#  define MODULE_AUTHOR(n)           /* nothing */
-#  define MODULE_DESCRIPTION(d)      /* nothing */
-#  define MODULE_SUPPORTED_DEVICE(n) /* nothing */
-#endif
-
-/*
- * In version 2.2 (up to 2.2.19, at least), the macro for request_module()
- * when no kmod is there is wrong. It's a "do {} while 0" but it shouldbe int
- */
-#ifdef LINUX_22
-#  ifndef CONFIG_KMOD
-#    undef request_module
-#    define request_module(name) -ENOSYS
-#  endif
-#endif
-
-
-#ifndef LINUX_20
-#  include <linux/init.h>     /* module_init/module_exit */
-#endif
-
-#ifndef module_init
-#  define module_init(x)        int init_module(void) { return x(); }
-#  define module_exit(x)        void cleanup_module(void) { x(); }
-#endif
-
-#ifndef SET_MODULE_OWNER
-#  define SET_MODULE_OWNER(structure) /* nothing */
-#endif
-
-/*
- * "select" changed in 2.1.23. The implementation is twin, but this
- * header is new
- *
- */
-#ifdef LINUX_20
-#  define __USE_OLD_SELECT__
-#else
-#  include <linux/poll.h>
-#endif
-
-#ifdef LINUX_20
-#  define INODE_FROM_F(filp) ((filp)->f_inode)
-#else
-#  define INODE_FROM_F(filp) ((filp)->f_dentry->d_inode)
-#endif
-
-/* Other changes in the fops are solved using wrappers */
-
-/*
- * Wait queues changed with 2.3
- */
-#ifndef DECLARE_WAIT_QUEUE_HEAD
-#  define DECLARE_WAIT_QUEUE_HEAD(head) struct wait_queue *head = NULL
-   typedef  struct wait_queue *wait_queue_head_t;
-#  define init_waitqueue_head(head) (*(head)) = NULL
-
-/* offer wake_up_sync as an alias for wake_up */
-#  define wake_up_sync(head) wake_up(head)
-#  define wake_up_interruptible_sync(head) wake_up_interruptible(head)
-
-/* Pretend we have add_wait_queue_exclusive */
-#  define add_wait_queue_exclusive(q,entry) add_wait_queue ((q), (entry))
-
-#endif /* no DECLARE_WAIT_QUEUE_HEAD */
-
-/*
- * Define wait_event for 2.0 kernels.  (This ripped off directly from
- * the 2.2.18 sched.h)
- */
-#ifdef LINUX_20
-
-#define __wait_event(wq, condition) 					\
-do {									\
-	struct wait_queue __wait;					\
-									\
-	__wait.task = current;						\
-	add_wait_queue(&wq, &__wait);					\
-	for (;;) {							\
-		current->state = TASK_UNINTERRUPTIBLE;			\
-		mb();							\
-		if (condition)						\
-			break;						\
-		schedule();						\
-	}								\
-	current->state = TASK_RUNNING;					\
-	remove_wait_queue(&wq, &__wait);				\
-} while (0)
-
-#define wait_event(wq, condition) 					\
-do {									\
-	if (condition)	 						\
-		break;							\
-	__wait_event(wq, condition);					\
-} while (0)
-
-#define __wait_event_interruptible(wq, condition, ret)			\
-do {									\
-	struct wait_queue __wait;					\
-									\
-	__wait.task = current;						\
-	add_wait_queue(&wq, &__wait);					\
-	for (;;) {							\
-		current->state = TASK_INTERRUPTIBLE;			\
-		mb();							\
-		if (condition)						\
-			break;						\
-		if (!signal_pending(current)) {				\
-			schedule();					\
-			continue;					\
-		}							\
-		ret = -ERESTARTSYS;					\
-		break;							\
-	}								\
-	current->state = TASK_RUNNING;					\
-	remove_wait_queue(&wq, &__wait);				\
-} while (0)
-
-#define wait_event_interruptible(wq, condition)				\
-({									\
-	int __ret = 0;							\
-	if (!(condition))						\
-		__wait_event_interruptible(wq, condition, __ret);	\
-	__ret;								\
-})
-#endif
-
-
-/*
- * 2.3 added tasklets
- */
-#ifdef LINUX_24
-#  define HAVE_TASKLETS
-#endif
-
-
-
-
-/* FIXME: implement the other versions of wake_up etc */
-
-
-/*
- * access to user space: use the 2.2 functions,
- * and implement them as macros for 2.0
- */
-
-#ifdef LINUX_20
-#  include <asm/segment.h>
-#  define access_ok(t,a,sz)           (verify_area((t),(void *) (a),(sz)) ? 0 : 1)
-#  define verify_area_20              verify_area
-#  define   copy_to_user(t,f,n)         (memcpy_tofs((t), (f), (n)), 0)
-#  define copy_from_user(t,f,n)       (memcpy_fromfs((t), (f), (n)), 0)
-#  define   __copy_to_user(t,f,n)       copy_to_user((t), (f), (n))
-#  define __copy_from_user(t,f,n)     copy_from_user((t), (f), (n))
-
-#  define PUT_USER(val,add)           (put_user((val),(add)), 0)
-#  define __PUT_USER(val,add)         PUT_USER((val),(add))
-
-#  define GET_USER(dest,add)          ((dest)=get_user((add)), 0)
-#  define __GET_USER(dest,add)        GET_USER((dest),(add))
-#else
-#  include <asm/uaccess.h>
-#  include <asm/io.h>
-#  define verify_area_20(t,a,sz) (0) /* == success */
-#  define   PUT_USER   put_user
-#  define __PUT_USER __put_user
-#  define   GET_USER   get_user
-#  define __GET_USER __get_user
-#endif
-
-/*
- * Allocation issues
- */
-#ifdef GFP_USER /* only if mm.h has been included */
-#  ifdef LINUX_20
-#    define __GFP_DMA GFP_DMA /* 2.0 didn't have the leading __ */
-#  endif
-#  ifndef LINUX_24
-#    define __GFP_HIGHMEM  0  /* was not there */
-#    define GFP_HIGHUSER   0   /* idem */
-#  endif
-
-#  ifdef LINUX_20
-#    define __get_free_pages(a,b) __get_free_pages((a),(b),0)
-#  endif
-#  ifndef LINUX_24
-#    define get_zeroed_page get_free_page
-#  endif
-#endif
-
-/* ioremap */
-#if defined(LINUX_20) && defined(_LINUX_MM_H)
-#  define ioremap_nocache ioremap
-#  ifndef __i386__
-   /* This simple approach works for non-PC platforms. */
-#    define ioremap vremap
-#    define iounmap vfree
-#  else /* the PC has <expletive> ISA; 2.2 and 2.4 remap it, 2.0 needs not */
-extern inline void *ioremap(unsigned long phys_addr, unsigned long size)
-{
-    if (phys_addr >= 0xA0000 && phys_addr + size <= 0x100000)
-        return (void *)phys_addr;
-    return vremap(phys_addr, size);
-}
-
-extern inline void iounmap(void *addr)
-{
-    if ((unsigned long)addr >= 0xA0000
-            && (unsigned long)addr < 0x100000)
-        return;
-    vfree(addr);
-}
-#  endif
-#endif
-
-/* Also, define check_mem_region etc */
-#ifndef LINUX_24
-#  define check_mem_region(a,b)     0 /* success */
-#  define request_mem_region(a,b,c) /* nothing */
-#  define release_mem_region(a,b)   /* nothing */
-#endif
-
-/* implement capable() for 2.0 */
-#ifdef LINUX_20
-#  define capable(anything)  suser()
-#endif
-
-/* The use_count of exec_domain and binfmt changed in 2.1.23 */
-
-#ifdef LINUX_20
-#  define INCRCOUNT(p)  ((p)->module ? __MOD_INC_USE_COUNT((p)->module) : 0)
-#  define DECRCOUNT(p)  ((p)->module ? __MOD_DEC_USE_COUNT((p)->module) : 0)
-#  define CURRCOUNT(p)  ((p)->module && (p)->module->usecount)
-#else
-#  define INCRCOUNT(p)  ((p)->use_count++)
-#  define DECRCOUNT(p)  ((p)->use_count--)
-#  define CURRCOUNT(p)  ((p)->use_count)
-#endif
-
-/*
- * /proc has changed a lot across the versions...
- */
-#ifdef LINUX_20
-#  define USE_PROC_REGISTER
-#endif
-
-
-/*
- * 2.2 didn't have create_proc_{read|info}_entry yet.
- * And it looks like there are no other "interesting" entry point, as
- * the rest is somehow esotique (mknod, symlink, ...)
- */
-#ifdef LINUX_22
-#  ifdef PROC_SUPER_MAGIC  /* Only if procfs is being used */
-extern inline struct proc_dir_entry *create_proc_read_entry(const char *name,
-                          mode_t mode, struct proc_dir_entry *base,
-                          read_proc_t *read_proc, void * data)
-{
-    struct proc_dir_entry *res=create_proc_entry(name,mode,base);
-    if (res) {
-        res->read_proc=read_proc;
-        res->data=data;
-    }
-    return res;
-}
-
-#    ifndef create_proc_info_entry /* added in 2.2.18 */
-typedef int (get_info_t)(char *, char **, off_t, int, int);
-extern inline struct proc_dir_entry *create_proc_info_entry(const char *name,
-        mode_t mode, struct proc_dir_entry *base, get_info_t *get_info)
-{
-        struct proc_dir_entry *res=create_proc_entry(name,mode,base);
-        if (res) res->get_info=get_info;
-        return res;
-}
-#    endif  /* no create_proc_info_entry */
-#  endif
-#endif
-
-#ifdef LINUX_20
-#  define test_and_set_bit(nr,addr)  test_bit((nr),(addr))
-#  define test_and_clear_bit(nr,addr) clear_bit((nr),(addr))
-#  define test_and_change_bit(nr,addr) change_bit((nr),(addr))
-#endif
-
-
-/* 2.0 had no read and write memory barriers, and 2.2 lacks the
-   set_ functions */
-#ifndef LINUX_24
-#  ifdef LINUX_20
-#    define wmb() mb() /* this is a big penalty on non-reordering platfs */
-#    define rmb() mb() /* this is a big penalty on non-reordering platfs */
-#  endif /* LINUX_20 */
-
-#define set_mb() do { var = value; mb(); } while (0)
-#define set_wmb() do { var = value; wmb(); } while (0)
-#endif /* ! LINUX_24 */
-
-
-
-/* 2.1.30 removed these functions. Let's define them, just in case */
-#ifndef LINUX_20
-#  define queue_task_irq      queue_task
-#  define queue_task_irq_off  queue_task
-#endif
-
-/* 2.1.10 and 2.1.43 introduced new functions. They are worth using */
-
-#ifdef LINUX_20
-
-#  include <asm/byteorder.h>
-#  ifdef __LITTLE_ENDIAN
-#    define cpu_to_le16(x) (x)
-#    define cpu_to_le32(x) (x)
-#    define cpu_to_be16(x) htons((x))
-#    define cpu_to_be32(x) htonl((x))
-#  else
-#    define cpu_to_be16(x) (x)
-#    define cpu_to_be32(x) (x)
-     extern inline __u16 cpu_to_le16(__u16 x) { return (x<<8) | (x>>8);}
-     extern inline __u32 cpu_to_le32(__u32 x) { return (x>>24) |
-             ((x>>8)&0xff00) | ((x<<8)&0xff0000) | (x<<24);}
-#  endif
-
-#  define le16_to_cpu(x)  cpu_to_le16(x)
-#  define le32_to_cpu(x)  cpu_to_le32(x)
-#  define be16_to_cpu(x)  cpu_to_be16(x)
-#  define be32_to_cpu(x)  cpu_to_be32(x)
-
-#  define cpu_to_le16p(addr) (cpu_to_le16(*(addr)))
-#  define cpu_to_le32p(addr) (cpu_to_le32(*(addr)))
-#  define cpu_to_be16p(addr) (cpu_to_be16(*(addr)))
-#  define cpu_to_be32p(addr) (cpu_to_be32(*(addr)))
-
-   extern inline void cpu_to_le16s(__u16 *a) {*a = cpu_to_le16(*a);}
-   extern inline void cpu_to_le32s(__u16 *a) {*a = cpu_to_le32(*a);}
-   extern inline void cpu_to_be16s(__u16 *a) {*a = cpu_to_be16(*a);}
-   extern inline void cpu_to_be32s(__u16 *a) {*a = cpu_to_be32(*a);}
-
-#  define le16_to_cpup(x) cpu_to_le16p(x)
-#  define le32_to_cpup(x) cpu_to_le32p(x)
-#  define be16_to_cpup(x) cpu_to_be16p(x)
-#  define be32_to_cpup(x) cpu_to_be32p(x)
-
-#  define le16_to_cpus(x) cpu_to_le16s(x)
-#  define le32_to_cpus(x) cpu_to_le32s(x)
-#  define be16_to_cpus(x) cpu_to_be16s(x)
-#  define be32_to_cpus(x) cpu_to_be32s(x)
-
-#endif
-
-#ifdef LINUX_20
-#  define __USE_OLD_REBUILD_HEADER__
-#endif
-
-/*
- * 2.0 didn't include sema_init, so we make our own - but only if it
- * looks like semaphore.h got included.
- */
-#ifdef LINUX_20
-#  ifdef MUTEX_LOCKED   /* Only if semaphore.h included */
-     extern inline void sema_init (struct semaphore *sem, int val)
-     {
-         sem->count = val;
-         sem->waking = sem->lock = 0;
-         sem->wait = NULL;
-     }
-#  endif
-#endif /* LINUX_20 */
-
-/*
- * In 2.0, there is no real need for spinlocks, and they weren't really
- * implemented anyway.
- *
- * XXX the _irqsave variant should be defined eventually to do the
- * right thing.
- */
-#ifdef LINUX_20
-typedef int spinlock_t;
-#  define spin_lock(lock)
-#  define spin_unlock(lock)
-#  define spin_lock_init(lock)
-
-#  define spin_lock_irqsave(lock,flags) do { \
-        save_flags(flags); cli(); } while (0);
-#  define spin_unlock_irqrestore(lock,flags) restore_flags(flags);
-#endif
-
-/*
- * 2.1 stuffed the "flush" method into the middle of the file_operations
- * structure.  The FOP_NO_FLUSH symbol is for drivers that do not implement
- * flush (most of them), it can be inserted in initializers for all 2.x
- * kernel versions.
- */
-#ifdef LINUX_20
-#  define FOP_NO_FLUSH   /* nothing */
-#  define TAG_LLSEEK    lseek
-#  define TAG_POLL      select
-#else
-#  define FOP_NO_FLUSH  NULL,
-#  define TAG_LLSEEK    llseek
-#  define TAG_POLL      poll
-#endif
-
-
-
-/*
- * fasync changed in 2.2.
- */
-#ifdef LINUX_20
-/*  typedef struct inode *fasync_file; */
-#  define fasync_file struct inode *
-#else
-  typedef int fasync_file;
-#endif
-
-/* kill_fasync had less arguments, and a different indirection in the first */
-#ifndef LINUX_24
-#  define kill_fasync(ptrptr,sig,band)  kill_fasync(*(ptrptr),(sig))
-#endif
-
-/* other things that are virtualized: define the new functions for the old k */
-#ifdef LINUX_20
-#  define in_interrupt() (intr_count!=0)
-#  define mdelay(x) udelay((x)*1000)
-#  define signal_pending(current)  ((current)->signal & ~(current)->blocked)
-#endif
-
-#ifdef LINUX_PCI_H /* only if PCI stuff is being used */
-#  ifdef LINUX_20
-#    include "pci-compat.h" /* a whole set of replacement functions */
-#  else
-#    define  pci_release_device(d) /* placeholder, used in 2.0 to free stuff */
-#  endif
-#endif
-
-
-
-/*
- * Some task state stuff
- */
-
-#ifndef set_current_state
-#  define set_current_state(s) current->state = (s);
-#endif
-
-#ifdef LINUX_20
-extern inline void schedule_timeout(int timeout)
-{
-    current->timeout = jiffies + timeout;
-    current->state = TASK_INTERRUPTIBLE;
-    schedule();
-    current->timeout = 0;
-}
-
-extern inline long sleep_on_timeout(wait_queue_head_t *q, signed long timeout)
-{
-    signed long early = 0;
-
-    current->timeout = jiffies + timeout;
-    sleep_on (q);
-    if (current->timeout > 0) {
-        early = current->timeout - jiffies;
-        current->timeout = 0;
-    }
-    return early;
-}
-
-
-extern inline long interruptible_sleep_on_timeout(wait_queue_head_t *q,
-                signed long timeout)
-{
-    signed long early = 0;
-
-    current->timeout = jiffies + timeout;
-    interruptible_sleep_on (q);
-    if (current->timeout > 0) {
-        early = current->timeout - jiffies;
-        current->timeout = 0;
-    }
-    return early;
-}
-
-#endif /* LINUX_20 */
-
-/*
- * Schedule_task was a late 2.4 addition.
- */
-#ifndef LINUX_24
-extern inline int schedule_task(struct tq_struct *task)
-{
-        queue_task(task, &tq_scheduler);
-        return 1;
-}
-#endif
-
-
-/*
- * Timing issues
- */
-#ifdef LINUX_20
-#  define get_fast_time do_gettimeofday
-#endif
-
-#ifdef _LINUX_DELAY_H /* only if linux/delay.h is included */
-#  ifndef mdelay /* linux-2.0 */
-#    ifndef MAX_UDELAY_MS
-#      define MAX_UDELAY_MS   5
-#    endif
-#    define mdelay(n) (\
-        (__builtin_constant_p(n) && (n)<=MAX_UDELAY_MS) ? udelay((n)*1000) : \
-        ({unsigned long msec=(n); while (msec--) udelay(1000);}))
-#  endif /* mdelay */
-#endif /* _LINUX_DELAY_H */
-
-
-/*
- * No del_timer_sync before 2.4
- */
-#ifndef LINUX_24
-#  define del_timer_sync(timer) del_timer(timer)  /* and hope */
-#endif
-
-/*
- * mod_timer wasn't present in 2.0
- */
-#ifdef LINUX_20
-static inline int mod_timer(struct timer_list *timer, unsigned long expires)
-{
-    int pending = del_timer(timer);
-    if (pending) {
-        timer->expires = expires;
-        add_timer(timer);
-    }
-    return pending;
-}
-#endif
-/*
- * Various changes in mmap and friends.
- */
-
-#ifndef NOPAGE_SIGBUS
-#  define NOPAGE_SIGBUS  NULL  /* return value of the nopage memory method */
-#  define NOPAGE_OOM     NULL  /* No real equivalent in older kernels */
-#endif
-
-#ifndef VM_RESERVED            /* Added 2.4.0-test10 */
-#  define VM_RESERVED 0
-#endif
-
-#ifdef LINUX_24 /* use "vm_pgoff" to get an offset */
-#define VMA_OFFSET(vma)  ((vma)->vm_pgoff << PAGE_SHIFT)
-#else /* use "vm_offset" */
-#define VMA_OFFSET(vma)  ((vma)->vm_offset)
-#endif
-
-#ifdef MAP_NR
-#define virt_to_page(page) (mem_map + MAP_NR(page))
-#endif
-
-#ifndef get_page
-#  define get_page(p) atomic_inc(&(p)->count)
-#endif
-
-/*
- * No DMA lock in 2.0.
- */
-#ifdef LINUX_20
-static inline unsigned long claim_dma_lock(void)
-{
-    unsigned long flags;
-    save_flags(flags);
-    cli();
-    return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
-    restore_flags(flags);
-}
-#endif
-
-
-/*
- * I/O memory was not managed by ealier kernels, define them as success
- */
-
-#if 0 /* FIXME: what is the right way to do request_mem_region? */
-#ifndef LINUX_24
-#  define check_mem_region(start, len)          0
-#  define request_mem_region(start, len, name)  0
-#  define release_mem_region(start, len)        0
-
-   /*
-    * Also, request_ and release_ region used to return void. Return 0 instead
-    */
-#  define request_region(s, l, n)  ({request_region((s),(l),(n));0;})
-#  define release_region(s, l)     ({release_region((s),(l));0;})
-
-#endif /* not LINUX_24 */
-#endif
-
-/*
- * Block layer stuff.
- */
-#ifndef LINUX_24
-
-/* BLK_DEFAULT_QUEUE for use with these macros only!!!! */
-#define BLK_DEFAULT_QUEUE(major) blk_dev[(major)].request_fn
-#define blk_init_queue(where,request_fn) where = request_fn;
-#define blk_cleanup_queue(where) where = NULL;
-
-/* No QUEUE_EMPTY in older kernels */
-#ifndef QUEUE_EMPTY  /* Driver can redefine it too */
-#  define QUEUE_EMPTY (CURRENT != NULL)
-#endif
-
-#ifdef RO_IOCTLS
-static inline int blk_ioctl(kdev_t dev, unsigned int cmd, unsigned long arg)
-{
-    int err;
-
-    switch (cmd) {
-      case BLKRAGET: /* return the readahead value */
-        if (!arg)  return -EINVAL;
-        err = ! access_ok(VERIFY_WRITE, arg, sizeof(long));
-        if (err) return -EFAULT;
-        PUT_USER(read_ahead[MAJOR(dev)],(long *) arg);
-        return 0;
-
-      case BLKRASET: /* set the readahead value */
-        if (!capable(CAP_SYS_ADMIN)) return -EACCES;
-        if (arg > 0xff) return -EINVAL; /* limit it */
-        read_ahead[MAJOR(dev)] = arg;
-        return 0;
-
-      case BLKFLSBUF: /* flush */
-        if (! capable(CAP_SYS_ADMIN)) return -EACCES; /* only root */
-        fsync_dev(dev);
-        invalidate_buffers(dev);
-        return 0;
-
-        RO_IOCTLS(dev, arg);
-    }
-    return -ENOTTY;
-}
-#endif  /* RO_IOCTLS */
-
-#ifdef LINUX_EXTENDED_PARTITION /* defined in genhd.h */
-static inline void register_disk(struct gendisk *gdev, kdev_t dev,
-                unsigned minors, struct file_operations *ops, long size)
-{
-    if (! gdev)
-        return;
-    resetup_one_dev(gdev, MINOR(dev) >> gdev->minor_shift);
-}
-#endif /* LINUX_EXTENDED_PARTITION */
-
-
-#else  /* it is Linux 2.4 */
-#define HAVE_BLKPG_H
-#endif /* LINUX_24 */
-
-
-
-#ifdef LINUX_20 /* physical and virtual addresses had the same value */
-#  define __pa(a) (a)
-#  define __va(a) (a)
-#endif
-
-/*
- * Network driver compatibility
- */
-
-/*
- * 2.0 dev_kfree_skb had an extra arg.  The following is a little dangerous
- * in that it assumes that FREE_WRITE is always wanted.  Very few 2.0 drivers
- * use FREE_READ, but the number is *not* zero...
- *
- * Also: implement the non-checking versions of a couple skb functions -
- * but they still check in 2.0.
- */
-#ifdef LINUX_20
-#  define dev_kfree_skb(skb) dev_kfree_skb((skb), FREE_WRITE);
-
-#  define __skb_push(skb, len) skb_push((skb), (len))
-#  define __skb_put(skb, len)  skb_put((skb), (len))
-#endif
-
-/*
- * Softnet changes in 2.4
- */
-#ifndef LINUX_24
-#  ifdef _LINUX_NETDEVICE_H /* only if netdevice.h was included */
-#  define netif_start_queue(dev) clear_bit(0, (void *) &(dev)->tbusy);
-#  define netif_stop_queue(dev)  set_bit(0, (void *) &(dev)->tbusy);
-
-static inline void netif_wake_queue(struct device *dev)
-{
-    clear_bit(0, (void *) &(dev)->tbusy);
-    mark_bh(NET_BH);
-}
-
-/* struct device became struct net_device */
-#  define net_device device
-#  endif /* netdevice.h */
-#endif /* ! LINUX_24 */
-
-/*
- * Memory barrier stuff, define what's missing from older kernel versions
- */
-#ifdef switch_to /* this is always a macro, defined in <asm/sysstem.h> */
-
-#  ifndef set_mb
-#    define set_mb(var, value) do {(var) = (value); mb();}  while 0
-#  endif
-#  ifndef set_rmb
-#    define set_rmb(var, value) do {(var) = (value); rmb();}  while 0
-#  endif
-#  ifndef set_wmb
-#    define set_wmb(var, value) do {(var) = (value); wmb();}  while 0
-#  endif
-
-/* The hw barriers are defined as sw barriers. A correct thing if this
-   specific kernel/platform is supported but has no specific instruction */
-#  ifndef mb
-#    define mb barrier
-#  endif
-#  ifndef rmb
-#    define rmb barrier
-#  endif
-#  ifndef wmb
-#    define wmb barrier
-#  endif
-
-#endif /* switch to (i.e. <asm/system.h>) */
-
-
-#endif /* _SYSDEP_H_ */