diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-24 10:33:08 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-24 10:33:08 -0700 |
commit | e731f3146ff3bba5424b40140e1a7e6f92e94964 (patch) | |
tree | c926040385de8b020763f0d2338e0ccbf42bac45 /drivers/usb/gadget/udc | |
parent | 1f70935f637dfba226bf77182c2629fde61ed06e (diff) | |
parent | accdab6d9e8f715068d91ee0ca0424a6999f0d19 (diff) |
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
Diffstat (limited to 'drivers/usb/gadget/udc')
-rw-r--r-- | drivers/usb/gadget/udc/s3c-hsudc.c | 55 | ||||
-rw-r--r-- | drivers/usb/gadget/udc/s3c2410_udc.c | 31 | ||||
-rw-r--r-- | drivers/usb/gadget/udc/s3c2410_udc.h | 1 | ||||
-rw-r--r-- | drivers/usb/gadget/udc/s3c2410_udc_regs.h | 146 |
4 files changed, 162 insertions, 71 deletions
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c index aaca1b0a2f59..7bd5182ce3ef 100644 --- a/drivers/usb/gadget/udc/s3c-hsudc.c +++ b/drivers/usb/gadget/udc/s3c-hsudc.c @@ -30,8 +30,6 @@ #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> -#include <mach/regs-s3c2443-clock.h> - #define S3C_HSUDC_REG(x) (x) /* Non-Indexed Registers */ @@ -186,53 +184,6 @@ static inline void __orr32(void __iomem *ptr, u32 val) writel(readl(ptr) | val, ptr); } -static void s3c_hsudc_init_phy(void) -{ - u32 cfg; - - cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY; - writel(cfg, S3C2443_PWRCFG); - - cfg = readl(S3C2443_URSTCON); - cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); - writel(cfg, S3C2443_URSTCON); - mdelay(1); - - cfg = readl(S3C2443_URSTCON); - cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); - writel(cfg, S3C2443_URSTCON); - - cfg = readl(S3C2443_PHYCTRL); - cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT); - cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL); - writel(cfg, S3C2443_PHYCTRL); - - cfg = readl(S3C2443_PHYPWR); - cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN | - S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK | - S3C2443_PHYPWR_ANALOG_PD); - cfg |= S3C2443_PHYPWR_COMMON_ON; - writel(cfg, S3C2443_PHYPWR); - - cfg = readl(S3C2443_UCLKCON); - cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN | - S3C2443_UCLKCON_TCLKEN); - writel(cfg, S3C2443_UCLKCON); -} - -static void s3c_hsudc_uninit_phy(void) -{ - u32 cfg; - - cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY; - writel(cfg, S3C2443_PWRCFG); - - writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR); - - cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN; - writel(cfg, S3C2443_UCLKCON); -} - /** * s3c_hsudc_complete_request - Complete a transfer request. * @hsep: Endpoint to which the request belongs. @@ -1188,7 +1139,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget, pm_runtime_get_sync(hsudc->dev); - s3c_hsudc_init_phy(); + if (hsudc->pd->phy_init) + hsudc->pd->phy_init(); if (hsudc->pd->gpio_init) hsudc->pd->gpio_init(); @@ -1210,7 +1162,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget) spin_lock_irqsave(&hsudc->lock, flags); hsudc->gadget.speed = USB_SPEED_UNKNOWN; - s3c_hsudc_uninit_phy(); + if (hsudc->pd->phy_uninit) + hsudc->pd->phy_uninit(); pm_runtime_put(hsudc->dev); diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index e875a0b967c0..f1ea51476add 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -36,15 +36,11 @@ #include <asm/byteorder.h> #include <asm/irq.h> #include <asm/unaligned.h> -#include <mach/irqs.h> -#include <mach/hardware.h> - -#include <plat/regs-udc.h> #include <linux/platform_data/usb-s3c2410_udc.h> - #include "s3c2410_udc.h" +#include "s3c2410_udc_regs.h" #define DRIVER_DESC "S3C2410 USB Device Controller Gadget" #define DRIVER_AUTHOR "Herbert Pƶtzl <herbert@13thfloor.at>, " \ @@ -57,6 +53,7 @@ static struct s3c2410_udc *the_controller; static struct clk *udc_clock; static struct clk *usb_bus_clock; static void __iomem *base_addr; +static int irq_usbd; static u64 rsrc_start; static u64 rsrc_len; static struct dentry *s3c2410_udc_debugfs_root; @@ -835,8 +832,6 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) } } -#include <mach/regs-irq.h> - /* * s3c2410_udc_irq - interrupt handler */ @@ -977,7 +972,7 @@ static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev) } } - dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD); + dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", irq_usbd); /* Restore old index */ udc_write(idx, S3C2410_UDC_INDEX_REG); @@ -1777,13 +1772,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev) spin_lock_init(&udc->lock); udc_info = dev_get_platdata(&pdev->dev); - rsrc_start = S3C2410_PA_USBDEV; - rsrc_len = S3C24XX_SZ_USBDEV; - - if (!request_mem_region(rsrc_start, rsrc_len, gadget_name)) - return -EBUSY; - - base_addr = ioremap(rsrc_start, rsrc_len); + base_addr = devm_platform_ioremap_resource(pdev, 0); if (!base_addr) { retval = -ENOMEM; goto err_mem; @@ -1795,17 +1784,19 @@ static int s3c2410_udc_probe(struct platform_device *pdev) s3c2410_udc_disable(udc); s3c2410_udc_reinit(udc); + irq_usbd = platform_get_irq(pdev, 0); + /* irq setup after old hardware state is cleaned up */ - retval = request_irq(IRQ_USBD, s3c2410_udc_irq, + retval = request_irq(irq_usbd, s3c2410_udc_irq, 0, gadget_name, udc); if (retval != 0) { - dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval); + dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval); retval = -EBUSY; goto err_map; } - dev_dbg(dev, "got irq %i\n", IRQ_USBD); + dev_dbg(dev, "got irq %i\n", irq_usbd); if (udc_info && udc_info->vbus_pin > 0) { retval = gpio_request(udc_info->vbus_pin, "udc vbus"); @@ -1872,7 +1863,7 @@ err_gpio_claim: if (udc_info && udc_info->vbus_pin > 0) gpio_free(udc_info->vbus_pin); err_int: - free_irq(IRQ_USBD, udc); + free_irq(irq_usbd, udc); err_map: iounmap(base_addr); err_mem: @@ -1906,7 +1897,7 @@ static int s3c2410_udc_remove(struct platform_device *pdev) free_irq(irq, udc); } - free_irq(IRQ_USBD, udc); + free_irq(irq_usbd, udc); iounmap(base_addr); release_mem_region(rsrc_start, rsrc_len); diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h index bdcaa8dd300f..68bdf3e5aac2 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.h +++ b/drivers/usb/gadget/udc/s3c2410_udc.h @@ -90,6 +90,7 @@ struct s3c2410_udc { unsigned req_pending : 1; u8 vbus; struct dentry *regs_info; + int irq; }; #define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget)) diff --git a/drivers/usb/gadget/udc/s3c2410_udc_regs.h b/drivers/usb/gadget/udc/s3c2410_udc_regs.h new file mode 100644 index 000000000000..d8d2eeaca088 --- /dev/null +++ b/drivers/usb/gadget/udc/s3c2410_udc_regs.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at> + */ + +#ifndef __ASM_ARCH_REGS_UDC_H +#define __ASM_ARCH_REGS_UDC_H + +#define S3C2410_USBDREG(x) (x) + +#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140) +#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144) +#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148) + +#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158) +#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c) + +#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c) + +#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170) +#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174) + +#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0) +#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4) +#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8) +#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc) +#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0) + +#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200) +#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204) +#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208) +#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c) +#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210) +#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214) + +#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218) +#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c) +#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220) +#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224) +#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228) +#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c) + +#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240) +#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244) +#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248) +#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c) +#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250) +#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254) + +#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258) +#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c) +#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260) +#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264) +#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268) +#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c) + +#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178) + +/* indexed registers */ + +#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180) + +#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184) + +#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184) +#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188) + +#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190) +#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194) +#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) +#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) + +#define S3C2410_UDC_FUNCADDR_UPDATE (1 << 7) + +#define S3C2410_UDC_PWR_ISOUP (1 << 7) /* R/W */ +#define S3C2410_UDC_PWR_RESET (1 << 3) /* R */ +#define S3C2410_UDC_PWR_RESUME (1 << 2) /* R/W */ +#define S3C2410_UDC_PWR_SUSPEND (1 << 1) /* R */ +#define S3C2410_UDC_PWR_ENSUSPEND (1 << 0) /* R/W */ + +#define S3C2410_UDC_PWR_DEFAULT (0x00) + +#define S3C2410_UDC_INT_EP4 (1 << 4) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP3 (1 << 3) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP2 (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP1 (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP0 (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_USBINT_RESET (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_RESUME (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_SUSPEND (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_INTE_EP4 (1 << 4) /* R/W */ +#define S3C2410_UDC_INTE_EP3 (1 << 3) /* R/W */ +#define S3C2410_UDC_INTE_EP2 (1 << 2) /* R/W */ +#define S3C2410_UDC_INTE_EP1 (1 << 1) /* R/W */ +#define S3C2410_UDC_INTE_EP0 (1 << 0) /* R/W */ + +#define S3C2410_UDC_USBINTE_RESET (1 << 2) /* R/W */ +#define S3C2410_UDC_USBINTE_SUSPEND (1 << 0) /* R/W */ + +#define S3C2410_UDC_INDEX_EP0 (0x00) +#define S3C2410_UDC_INDEX_EP1 (0x01) +#define S3C2410_UDC_INDEX_EP2 (0x02) +#define S3C2410_UDC_INDEX_EP3 (0x03) +#define S3C2410_UDC_INDEX_EP4 (0x04) + +#define S3C2410_UDC_ICSR1_CLRDT (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR1_SENTSTL (1 << 5) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_SENDSTL (1 << 4) /* R/W */ +#define S3C2410_UDC_ICSR1_FFLUSH (1 << 3) /* W (set only) */ +#define S3C2410_UDC_ICSR1_UNDRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_PKTRDY (1 << 0) /* R/W (set only) */ + +#define S3C2410_UDC_ICSR2_AUTOSET (1 << 7) /* R/W */ +#define S3C2410_UDC_ICSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR2_MODEIN (1 << 5) /* R/W */ +#define S3C2410_UDC_ICSR2_DMAIEN (1 << 4) /* R/W */ + +#define S3C2410_UDC_OCSR1_CLRDT (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR1_SENTSTL (1 << 6) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_SENDSTL (1 << 5) /* R/W */ +#define S3C2410_UDC_OCSR1_FFLUSH (1 << 4) /* R/W */ +#define S3C2410_UDC_OCSR1_DERROR (1 << 3) /* R */ +#define S3C2410_UDC_OCSR1_OVRRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_PKTRDY (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_OCSR2_AUTOCLR (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_OCSR2_DMAIEN (1 << 5) /* R/W */ + +#define S3C2410_UDC_EP0_CSR_OPKRDY (1 << 0) +#define S3C2410_UDC_EP0_CSR_IPKRDY (1 << 1) +#define S3C2410_UDC_EP0_CSR_SENTSTL (1 << 2) +#define S3C2410_UDC_EP0_CSR_DE (1 << 3) +#define S3C2410_UDC_EP0_CSR_SE (1 << 4) +#define S3C2410_UDC_EP0_CSR_SENDSTL (1 << 5) +#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1 << 6) +#define S3C2410_UDC_EP0_CSR_SSE (1 << 7) + +#define S3C2410_UDC_MAXP_8 (1 << 0) +#define S3C2410_UDC_MAXP_16 (1 << 1) +#define S3C2410_UDC_MAXP_32 (1 << 2) +#define S3C2410_UDC_MAXP_64 (1 << 3) + +#endif |